mirror of
https://github.com/MarlinFirmware/Configurations.git
synced 2025-08-08 14:34:07 -06:00
📝 Update http links, misc. cleanup
This commit is contained in:
Scott Lahteine
parent
27e44456cc
commit
9cfbc08d74
32 changed files with 504 additions and 506 deletions
|
|
@ -408,7 +408,7 @@
|
|||
* Specify whether the power supply is active HIGH or active LOW.
|
||||
*/
|
||||
//#define PSU_CONTROL
|
||||
#define PSU_NAME "MEAN WELL"
|
||||
#define PSU_NAME "Mean Well"
|
||||
|
||||
#if ENABLED(PSU_CONTROL)
|
||||
//#define MKS_PWC // Using the MKS PWC add-on
|
||||
|
|
|
|||
|
|
@ -1529,7 +1529,7 @@
|
|||
|
||||
// Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
|
||||
// especially with "vase mode" printing. Set too high and vases cannot be continued.
|
||||
#define POWER_LOSS_MIN_Z_CHANGE 2 // (mm) Minimum Z change before saving power-loss data
|
||||
#define POWER_LOSS_MIN_Z_CHANGE 2 // (mm) Minimum Z change before saving power-loss data
|
||||
|
||||
// Enable if Z homing is needed for proper recovery. 99.9% of the time this should be disabled!
|
||||
//#define POWER_LOSS_RECOVER_ZHOME
|
||||
|
|
@ -3544,7 +3544,6 @@
|
|||
*/
|
||||
//#define LASER_POWER_TRAP
|
||||
|
||||
|
||||
//
|
||||
// Laser I2C Ammeter (High precision INA226 low/high side module)
|
||||
//
|
||||
|
|
|
|||
|
|
@ -1,56 +1,57 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* Custom Boot Screen bitmap
|
||||
*
|
||||
* Place this file in the root with your configuration files
|
||||
* and enable SHOW_CUSTOM_BOOTSCREEN in Configuration.h.
|
||||
*
|
||||
* Use the Marlin Bitmap Converter to make your own:
|
||||
* https://marlinfw.org/tools/u8glib/converter.html
|
||||
*/
|
||||
#define CUSTOM_BOOTSCREEN_BMPWIDTH 112
|
||||
|
||||
const unsigned char custom_start_bmp[] PROGMEM = {
|
||||
B00000011,B11100100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B10000000,B00000000,B11110000,B00111111,B11111111,B00000000,
|
||||
B00000100,B00011100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000000,B00000011,B00011100,B00000111,B10000001,B11000000,
|
||||
B00001000,B00001100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000000,B00000011,B00001110,B00000111,B10000000,B11100000,
|
||||
B00010000,B00000100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000000,B00000011,B00001110,B00000111,B10000000,B01110000,
|
||||
B00010000,B00000100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000000,B00000011,B00001110,B00000111,B10000000,B01110000,
|
||||
B00011000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000000,B00000000,B00001110,B00000111,B10000000,B00111000,
|
||||
B00011100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000000,B00000000,B00001110,B00000111,B10000000,B00111000,
|
||||
B00011111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000000,B00000000,B00001100,B00000111,B10000000,B00111000,
|
||||
B00001111,B11111000,B00000011,B11100001,B11111000,B01111000,B00111110,B00000001,B10000000,B00000000,B00010000,B00000111,B10000000,B00111100,
|
||||
B00000111,B11111100,B00001100,B00110000,B01110000,B00000000,B11000011,B00000001,B10000000,B00000001,B11110000,B00000111,B10000000,B00111100,
|
||||
B00000001,B11111110,B00011100,B00011000,B01110000,B00100001,B11000001,B10000001,B10000000,B00000000,B00011100,B00000111,B10000000,B00111100,
|
||||
B00000000,B00011110,B00011100,B00011100,B00111000,B00000001,B11000001,B11000001,B10000000,B00000000,B00001110,B00000111,B10000000,B00111100,
|
||||
B00000000,B00000110,B00111100,B00011100,B00111000,B01000011,B11000001,B11000001,B10000000,B00000000,B00000111,B00000111,B10000000,B00111000,
|
||||
B00000000,B00000010,B00111100,B00011100,B00011100,B00000011,B11000001,B11000001,B10000000,B00000000,B00000111,B00000111,B10000000,B00111000,
|
||||
B00000000,B00000010,B00111100,B00011100,B00011100,B10000011,B11000001,B11000001,B10000000,B00000000,B00000111,B00000111,B10000000,B00111000,
|
||||
B00010000,B00000010,B00111100,B00011100,B00001110,B00000011,B11000001,B11000001,B10000000,B00000111,B00000111,B00000111,B10000000,B01110000,
|
||||
B00010000,B00000010,B00011100,B00011100,B00001111,B00000001,B11000001,B11000001,B10000000,B00000111,B00000111,B00000111,B10000000,B01110000,
|
||||
B00011000,B00000100,B00011100,B00011000,B00000110,B00000001,B11000001,B10000001,B10000000,B00000110,B00001110,B00000111,B10000000,B11100000,
|
||||
B00011100,B00001000,B00001100,B00110000,B00000110,B00000000,B11000011,B00000001,B10000000,B00000010,B00001100,B00000111,B10000001,B11000000,
|
||||
B00010011,B11110000,B00000011,B11100000,B00000000,B00000000,B00111110,B00000111,B11100000,B00000001,B11110000,B00111111,B11111111,B00000000
|
||||
};
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* Custom Boot Screen bitmap
|
||||
*
|
||||
* Place this file in the root with your configuration files
|
||||
* and enable SHOW_CUSTOM_BOOTSCREEN in Configuration.h.
|
||||
*
|
||||
* Use the Marlin Bitmap Converter to make your own:
|
||||
* https://marlinfw.org/tools/u8glib/converter.html
|
||||
*/
|
||||
|
||||
#define CUSTOM_BOOTSCREEN_BMPWIDTH 112
|
||||
|
||||
const unsigned char custom_start_bmp[] PROGMEM = {
|
||||
B00000011,B11100100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B10000000,B00000000,B11110000,B00111111,B11111111,B00000000,
|
||||
B00000100,B00011100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000000,B00000011,B00011100,B00000111,B10000001,B11000000,
|
||||
B00001000,B00001100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000000,B00000011,B00001110,B00000111,B10000000,B11100000,
|
||||
B00010000,B00000100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000000,B00000011,B00001110,B00000111,B10000000,B01110000,
|
||||
B00010000,B00000100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000000,B00000011,B00001110,B00000111,B10000000,B01110000,
|
||||
B00011000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000000,B00000000,B00001110,B00000111,B10000000,B00111000,
|
||||
B00011100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000000,B00000000,B00001110,B00000111,B10000000,B00111000,
|
||||
B00011111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000000,B00000000,B00001100,B00000111,B10000000,B00111000,
|
||||
B00001111,B11111000,B00000011,B11100001,B11111000,B01111000,B00111110,B00000001,B10000000,B00000000,B00010000,B00000111,B10000000,B00111100,
|
||||
B00000111,B11111100,B00001100,B00110000,B01110000,B00000000,B11000011,B00000001,B10000000,B00000001,B11110000,B00000111,B10000000,B00111100,
|
||||
B00000001,B11111110,B00011100,B00011000,B01110000,B00100001,B11000001,B10000001,B10000000,B00000000,B00011100,B00000111,B10000000,B00111100,
|
||||
B00000000,B00011110,B00011100,B00011100,B00111000,B00000001,B11000001,B11000001,B10000000,B00000000,B00001110,B00000111,B10000000,B00111100,
|
||||
B00000000,B00000110,B00111100,B00011100,B00111000,B01000011,B11000001,B11000001,B10000000,B00000000,B00000111,B00000111,B10000000,B00111000,
|
||||
B00000000,B00000010,B00111100,B00011100,B00011100,B00000011,B11000001,B11000001,B10000000,B00000000,B00000111,B00000111,B10000000,B00111000,
|
||||
B00000000,B00000010,B00111100,B00011100,B00011100,B10000011,B11000001,B11000001,B10000000,B00000000,B00000111,B00000111,B10000000,B00111000,
|
||||
B00010000,B00000010,B00111100,B00011100,B00001110,B00000011,B11000001,B11000001,B10000000,B00000111,B00000111,B00000111,B10000000,B01110000,
|
||||
B00010000,B00000010,B00011100,B00011100,B00001111,B00000001,B11000001,B11000001,B10000000,B00000111,B00000111,B00000111,B10000000,B01110000,
|
||||
B00011000,B00000100,B00011100,B00011000,B00000110,B00000001,B11000001,B10000001,B10000000,B00000110,B00001110,B00000111,B10000000,B11100000,
|
||||
B00011100,B00001000,B00001100,B00110000,B00000110,B00000000,B11000011,B00000001,B10000000,B00000010,B00001100,B00000111,B10000001,B11000000,
|
||||
B00010011,B11110000,B00000011,B11100000,B00000000,B00000000,B00111110,B00000111,B11100000,B00000001,B11110000,B00111111,B11111111,B00000000
|
||||
};
|
||||
|
|
|
|||
|
|
@ -1,50 +1,50 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* Custom Status Screen bitmap
|
||||
*
|
||||
* Place this file in the root with your configuration files
|
||||
* and enable CUSTOM_STATUS_SCREEN_IMAGE in Configuration.h.
|
||||
*
|
||||
* Use the Marlin Bitmap Converter to make your own:
|
||||
* https://marlinfw.org/tools/u8glib/converter.html
|
||||
*/
|
||||
|
||||
#define STATUS_LOGO_Y 8
|
||||
#define STATUS_LOGO_WIDTH 32
|
||||
|
||||
const unsigned char status_logo_bmp[] PROGMEM = {
|
||||
B00011110,B11110111,B10011100,B00000100,
|
||||
B00111111,B01100011,B00111110,B00001100,
|
||||
B01100011,B01100011,B01100011,B00111100,
|
||||
B01100000,B01100011,B01100011,B00001100,
|
||||
B01100000,B01100011,B01100011,B00001100,
|
||||
B00111100,B01100011,B01100011,B00001100,
|
||||
B00011110,B00110110,B01100011,B00001100,
|
||||
B00000011,B00110110,B01100011,B00001100,
|
||||
B00000011,B00110110,B01100011,B00001100,
|
||||
B01100011,B00011100,B01100011,B00001100,
|
||||
B01111110,B00011100,B00111110,B00111111,
|
||||
B00111100,B00001000,B00011100,B00111111
|
||||
};
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* Custom Status Screen bitmap
|
||||
*
|
||||
* Place this file in the root with your configuration files
|
||||
* and enable CUSTOM_STATUS_SCREEN_IMAGE in Configuration.h.
|
||||
*
|
||||
* Use the Marlin Bitmap Converter to make your own:
|
||||
* https://marlinfw.org/tools/u8glib/converter.html
|
||||
*/
|
||||
|
||||
#define STATUS_LOGO_Y 8
|
||||
#define STATUS_LOGO_WIDTH 32
|
||||
|
||||
const unsigned char status_logo_bmp[] PROGMEM = {
|
||||
B00011110,B11110111,B10011100,B00000100,
|
||||
B00111111,B01100011,B00111110,B00001100,
|
||||
B01100011,B01100011,B01100011,B00111100,
|
||||
B01100000,B01100011,B01100011,B00001100,
|
||||
B01100000,B01100011,B01100011,B00001100,
|
||||
B00111100,B01100011,B01100011,B00001100,
|
||||
B00011110,B00110110,B01100011,B00001100,
|
||||
B00000011,B00110110,B01100011,B00001100,
|
||||
B00000011,B00110110,B01100011,B00001100,
|
||||
B01100011,B00011100,B01100011,B00001100,
|
||||
B01111110,B00011100,B00111110,B00111111,
|
||||
B00111100,B00001000,B00011100,B00111111
|
||||
};
|
||||
|
|
|
|||
|
|
@ -404,7 +404,7 @@
|
|||
* Specify whether the power supply is active HIGH or active LOW.
|
||||
*/
|
||||
//#define PSU_CONTROL
|
||||
#define PSU_NAME "MEAN WELL"
|
||||
#define PSU_NAME "Mean Well"
|
||||
|
||||
#if ENABLED(PSU_CONTROL)
|
||||
//#define MKS_PWC // Using the MKS PWC add-on
|
||||
|
|
|
|||
|
|
@ -1529,7 +1529,7 @@
|
|||
|
||||
// Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
|
||||
// especially with "vase mode" printing. Set too high and vases cannot be continued.
|
||||
#define POWER_LOSS_MIN_Z_CHANGE 2 // (mm) Minimum Z change before saving power-loss data
|
||||
#define POWER_LOSS_MIN_Z_CHANGE 2 // (mm) Minimum Z change before saving power-loss data
|
||||
|
||||
// Enable if Z homing is needed for proper recovery. 99.9% of the time this should be disabled!
|
||||
//#define POWER_LOSS_RECOVER_ZHOME
|
||||
|
|
@ -3544,7 +3544,6 @@
|
|||
*/
|
||||
//#define LASER_POWER_TRAP
|
||||
|
||||
|
||||
//
|
||||
// Laser I2C Ammeter (High precision INA226 low/high side module)
|
||||
//
|
||||
|
|
@ -3762,7 +3761,7 @@
|
|||
//#define M114_REALTIME // Real current position based on forward kinematics
|
||||
//#define M114_LEGACY // M114 used to synchronize on every call. Enable if needed.
|
||||
|
||||
#define REPORT_FAN_CHANGE // Report the new fan speed when changed by M106 (and others)
|
||||
#define REPORT_FAN_CHANGE // Report the new fan speed when changed by M106 (and others)
|
||||
|
||||
// @section gcode
|
||||
|
||||
|
|
|
|||
|
|
@ -1,56 +1,56 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* Custom Boot Screen bitmap
|
||||
*
|
||||
* Place this file in the root with your configuration files
|
||||
* and enable SHOW_CUSTOM_BOOTSCREEN in Configuration.h.
|
||||
*
|
||||
* Use the Marlin Bitmap Converter to make your own:
|
||||
* https://marlinfw.org/tools/u8glib/converter.html
|
||||
*/
|
||||
#define CUSTOM_BOOTSCREEN_BMPWIDTH 112
|
||||
|
||||
const unsigned char custom_start_bmp[] PROGMEM = {
|
||||
B00000011,B11100100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B10000000,B00000000,B11110000,B00111111,B11111111,B00000000,
|
||||
B00000100,B00011100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000000,B00000011,B00011100,B00000111,B10000001,B11000000,
|
||||
B00001000,B00001100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000000,B00000011,B00001110,B00000111,B10000000,B11100000,
|
||||
B00010000,B00000100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000000,B00000011,B00001110,B00000111,B10000000,B01110000,
|
||||
B00010000,B00000100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000000,B00000011,B00001110,B00000111,B10000000,B01110000,
|
||||
B00011000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000000,B00000000,B00001110,B00000111,B10000000,B00111000,
|
||||
B00011100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000000,B00000000,B00001110,B00000111,B10000000,B00111000,
|
||||
B00011111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000000,B00000000,B00001100,B00000111,B10000000,B00111000,
|
||||
B00001111,B11111000,B00000011,B11100001,B11111000,B01111000,B00111110,B00000001,B10000000,B00000000,B00010000,B00000111,B10000000,B00111100,
|
||||
B00000111,B11111100,B00001100,B00110000,B01110000,B00000000,B11000011,B00000001,B10000000,B00000001,B11110000,B00000111,B10000000,B00111100,
|
||||
B00000001,B11111110,B00011100,B00011000,B01110000,B00100001,B11000001,B10000001,B10000000,B00000000,B00011100,B00000111,B10000000,B00111100,
|
||||
B00000000,B00011110,B00011100,B00011100,B00111000,B00000001,B11000001,B11000001,B10000000,B00000000,B00001110,B00000111,B10000000,B00111100,
|
||||
B00000000,B00000110,B00111100,B00011100,B00111000,B01000011,B11000001,B11000001,B10000000,B00000000,B00000111,B00000111,B10000000,B00111000,
|
||||
B00000000,B00000010,B00111100,B00011100,B00011100,B00000011,B11000001,B11000001,B10000000,B00000000,B00000111,B00000111,B10000000,B00111000,
|
||||
B00000000,B00000010,B00111100,B00011100,B00011100,B10000011,B11000001,B11000001,B10000000,B00000000,B00000111,B00000111,B10000000,B00111000,
|
||||
B00010000,B00000010,B00111100,B00011100,B00001110,B00000011,B11000001,B11000001,B10000000,B00000111,B00000111,B00000111,B10000000,B01110000,
|
||||
B00010000,B00000010,B00011100,B00011100,B00001111,B00000001,B11000001,B11000001,B10000000,B00000111,B00000111,B00000111,B10000000,B01110000,
|
||||
B00011000,B00000100,B00011100,B00011000,B00000110,B00000001,B11000001,B10000001,B10000000,B00000110,B00001110,B00000111,B10000000,B11100000,
|
||||
B00011100,B00001000,B00001100,B00110000,B00000110,B00000000,B11000011,B00000001,B10000000,B00000010,B00001100,B00000111,B10000001,B11000000,
|
||||
B00010011,B11110000,B00000011,B11100000,B00000000,B00000000,B00111110,B00000111,B11100000,B00000001,B11110000,B00111111,B11111111,B00000000
|
||||
};
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* Custom Boot Screen bitmap
|
||||
*
|
||||
* Place this file in the root with your configuration files
|
||||
* and enable SHOW_CUSTOM_BOOTSCREEN in Configuration.h.
|
||||
*
|
||||
* Use the Marlin Bitmap Converter to make your own:
|
||||
* https://marlinfw.org/tools/u8glib/converter.html
|
||||
*/
|
||||
#define CUSTOM_BOOTSCREEN_BMPWIDTH 112
|
||||
|
||||
const unsigned char custom_start_bmp[] PROGMEM = {
|
||||
B00000011,B11100100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B10000000,B00000000,B11110000,B00111111,B11111111,B00000000,
|
||||
B00000100,B00011100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000000,B00000011,B00011100,B00000111,B10000001,B11000000,
|
||||
B00001000,B00001100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000000,B00000011,B00001110,B00000111,B10000000,B11100000,
|
||||
B00010000,B00000100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000000,B00000011,B00001110,B00000111,B10000000,B01110000,
|
||||
B00010000,B00000100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000000,B00000011,B00001110,B00000111,B10000000,B01110000,
|
||||
B00011000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000000,B00000000,B00001110,B00000111,B10000000,B00111000,
|
||||
B00011100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000000,B00000000,B00001110,B00000111,B10000000,B00111000,
|
||||
B00011111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000000,B00000000,B00001100,B00000111,B10000000,B00111000,
|
||||
B00001111,B11111000,B00000011,B11100001,B11111000,B01111000,B00111110,B00000001,B10000000,B00000000,B00010000,B00000111,B10000000,B00111100,
|
||||
B00000111,B11111100,B00001100,B00110000,B01110000,B00000000,B11000011,B00000001,B10000000,B00000001,B11110000,B00000111,B10000000,B00111100,
|
||||
B00000001,B11111110,B00011100,B00011000,B01110000,B00100001,B11000001,B10000001,B10000000,B00000000,B00011100,B00000111,B10000000,B00111100,
|
||||
B00000000,B00011110,B00011100,B00011100,B00111000,B00000001,B11000001,B11000001,B10000000,B00000000,B00001110,B00000111,B10000000,B00111100,
|
||||
B00000000,B00000110,B00111100,B00011100,B00111000,B01000011,B11000001,B11000001,B10000000,B00000000,B00000111,B00000111,B10000000,B00111000,
|
||||
B00000000,B00000010,B00111100,B00011100,B00011100,B00000011,B11000001,B11000001,B10000000,B00000000,B00000111,B00000111,B10000000,B00111000,
|
||||
B00000000,B00000010,B00111100,B00011100,B00011100,B10000011,B11000001,B11000001,B10000000,B00000000,B00000111,B00000111,B10000000,B00111000,
|
||||
B00010000,B00000010,B00111100,B00011100,B00001110,B00000011,B11000001,B11000001,B10000000,B00000111,B00000111,B00000111,B10000000,B01110000,
|
||||
B00010000,B00000010,B00011100,B00011100,B00001111,B00000001,B11000001,B11000001,B10000000,B00000111,B00000111,B00000111,B10000000,B01110000,
|
||||
B00011000,B00000100,B00011100,B00011000,B00000110,B00000001,B11000001,B10000001,B10000000,B00000110,B00001110,B00000111,B10000000,B11100000,
|
||||
B00011100,B00001000,B00001100,B00110000,B00000110,B00000000,B11000011,B00000001,B10000000,B00000010,B00001100,B00000111,B10000001,B11000000,
|
||||
B00010011,B11110000,B00000011,B11100000,B00000000,B00000000,B00111110,B00000111,B11100000,B00000001,B11110000,B00111111,B11111111,B00000000
|
||||
};
|
||||
|
|
|
|||
|
|
@ -1,50 +1,50 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* Custom Status Screen bitmap
|
||||
*
|
||||
* Place this file in the root with your configuration files
|
||||
* and enable CUSTOM_STATUS_SCREEN_IMAGE in Configuration.h.
|
||||
*
|
||||
* Use the Marlin Bitmap Converter to make your own:
|
||||
* https://marlinfw.org/tools/u8glib/converter.html
|
||||
*/
|
||||
|
||||
#define STATUS_LOGO_Y 8
|
||||
#define STATUS_LOGO_WIDTH 32
|
||||
|
||||
const unsigned char status_logo_bmp[] PROGMEM = {
|
||||
B00011110,B11110111,B10011100,B00000100,
|
||||
B00111111,B01100011,B00111110,B00001100,
|
||||
B01100011,B01100011,B01100011,B00111100,
|
||||
B01100000,B01100011,B01100011,B00001100,
|
||||
B01100000,B01100011,B01100011,B00001100,
|
||||
B00111100,B01100011,B01100011,B00001100,
|
||||
B00011110,B00110110,B01100011,B00001100,
|
||||
B00000011,B00110110,B01100011,B00001100,
|
||||
B00000011,B00110110,B01100011,B00001100,
|
||||
B01100011,B00011100,B01100011,B00001100,
|
||||
B01111110,B00011100,B00111110,B00111111,
|
||||
B00111100,B00001000,B00011100,B00111111
|
||||
};
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* Custom Status Screen bitmap
|
||||
*
|
||||
* Place this file in the root with your configuration files
|
||||
* and enable CUSTOM_STATUS_SCREEN_IMAGE in Configuration.h.
|
||||
*
|
||||
* Use the Marlin Bitmap Converter to make your own:
|
||||
* https://marlinfw.org/tools/u8glib/converter.html
|
||||
*/
|
||||
|
||||
#define STATUS_LOGO_Y 8
|
||||
#define STATUS_LOGO_WIDTH 32
|
||||
|
||||
const unsigned char status_logo_bmp[] PROGMEM = {
|
||||
B00011110,B11110111,B10011100,B00000100,
|
||||
B00111111,B01100011,B00111110,B00001100,
|
||||
B01100011,B01100011,B01100011,B00111100,
|
||||
B01100000,B01100011,B01100011,B00001100,
|
||||
B01100000,B01100011,B01100011,B00001100,
|
||||
B00111100,B01100011,B01100011,B00001100,
|
||||
B00011110,B00110110,B01100011,B00001100,
|
||||
B00000011,B00110110,B01100011,B00001100,
|
||||
B00000011,B00110110,B01100011,B00001100,
|
||||
B01100011,B00011100,B01100011,B00001100,
|
||||
B01111110,B00011100,B00111110,B00111111,
|
||||
B00111100,B00001000,B00011100,B00111111
|
||||
};
|
||||
|
|
|
|||
|
|
@ -406,7 +406,7 @@
|
|||
* Specify whether the power supply is active HIGH or active LOW.
|
||||
*/
|
||||
//#define PSU_CONTROL
|
||||
#define PSU_NAME "MEAN WELL"
|
||||
#define PSU_NAME "Mean Well"
|
||||
|
||||
#if ENABLED(PSU_CONTROL)
|
||||
//#define MKS_PWC // Using the MKS PWC add-on
|
||||
|
|
@ -809,8 +809,8 @@
|
|||
#define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature
|
||||
// is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max.
|
||||
|
||||
#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of flash)
|
||||
#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of flash)
|
||||
#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of flash)
|
||||
#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of flash)
|
||||
#endif
|
||||
|
||||
// @section safety
|
||||
|
|
@ -1252,7 +1252,7 @@
|
|||
* https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
|
||||
*/
|
||||
#if DISABLED(CLASSIC_JERK)
|
||||
#define JUNCTION_DEVIATION_MM 0.08 // (mm) Distance from real junction edge
|
||||
#define JUNCTION_DEVIATION_MM 0.08 // (mm) Distance from real junction edge
|
||||
#define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle
|
||||
// for small segments (< 1mm) with large junction angles (> 135°).
|
||||
#endif
|
||||
|
|
@ -1569,7 +1569,7 @@
|
|||
* Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle.
|
||||
* But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle.
|
||||
*/
|
||||
#define Z_CLEARANCE_DEPLOY_PROBE 7 // Z Clearance for Deploy/Stow
|
||||
#define Z_CLEARANCE_DEPLOY_PROBE 7 // Z Clearance for Deploy/Stow
|
||||
#define Z_CLEARANCE_BETWEEN_PROBES 3 // Z Clearance between probe points
|
||||
#define Z_CLEARANCE_MULTI_PROBE 3 // Z Clearance between multiple probes
|
||||
//#define Z_AFTER_PROBING 5 // Z position after probing is done
|
||||
|
|
|
|||
|
|
@ -16,9 +16,10 @@
|
|||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* Custom Status Screen bitmap
|
||||
|
|
@ -27,11 +28,9 @@
|
|||
* and enable CUSTOM_STATUS_SCREEN_IMAGE in Configuration.h.
|
||||
*
|
||||
* Use the Marlin Bitmap Converter to make your own:
|
||||
* http://marlinfw.org/tools/u8glib/converter.html
|
||||
* https://marlinfw.org/tools/u8glib/converter.html
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
#define STATUS_LOGO_WIDTH 32
|
||||
|
||||
const unsigned char status_logo_bmp[] PROGMEM = {
|
||||
|
|
@ -65,4 +64,3 @@ const unsigned char status_logo_bmp[] PROGMEM = {
|
|||
B00000000,B00011111,B11000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000
|
||||
};
|
||||
|
||||
|
|
|
|||
|
|
@ -2110,6 +2110,8 @@
|
|||
#endif
|
||||
|
||||
/**
|
||||
* Probing Margins
|
||||
*
|
||||
* Override PROBING_MARGIN for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
|
|
@ -3472,7 +3474,8 @@
|
|||
* Each tool uses different value ranges for speed / power control.
|
||||
* These parameters are used to convert between tool power units and PWM.
|
||||
*
|
||||
* Set these required parameters for your controller
|
||||
* Speed/Power = (PWMDC / 255 * 100 - SPEED_POWER_INTERCEPT) / SPEED_POWER_SLOPE
|
||||
* PWMDC = (spdpwr - SPEED_POWER_MIN) / (SPEED_POWER_MAX - SPEED_POWER_MIN) / SPEED_POWER_SLOPE
|
||||
*/
|
||||
#if ENABLED(SPINDLE_LASER_USE_PWM)
|
||||
#define SPEED_POWER_INTERCEPT 0 // (%) 0-100 i.e., Minimum power percentage
|
||||
|
|
@ -3541,7 +3544,6 @@
|
|||
*/
|
||||
//#define LASER_POWER_TRAP
|
||||
|
||||
|
||||
//
|
||||
// Laser I2C Ammeter (High precision INA226 low/high side module)
|
||||
//
|
||||
|
|
|
|||
|
|
@ -1,56 +1,54 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* Custom Boot Screen bitmap
|
||||
*
|
||||
* Place this file in the root with your configuration files
|
||||
* and enable SHOW_CUSTOM_BOOTSCREEN in Configuration.h.
|
||||
*
|
||||
* Use the Marlin Bitmap Converter to make your own:
|
||||
* https://marlinfw.org/tools/u8glib/converter.html
|
||||
*/
|
||||
#define CUSTOM_BOOTSCREEN_BMPWIDTH 112
|
||||
|
||||
const unsigned char custom_start_bmp[] PROGMEM = {
|
||||
B00000011,B11100100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B10000000,B00000000,B11110000,B00111111,B11111111,B00000000,
|
||||
B00000100,B00011100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000000,B00000011,B00011100,B00000111,B10000001,B11000000,
|
||||
B00001000,B00001100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000000,B00000011,B00001110,B00000111,B10000000,B11100000,
|
||||
B00010000,B00000100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000000,B00000011,B00001110,B00000111,B10000000,B01110000,
|
||||
B00010000,B00000100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000000,B00000011,B00001110,B00000111,B10000000,B01110000,
|
||||
B00011000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000000,B00000000,B00001110,B00000111,B10000000,B00111000,
|
||||
B00011100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000000,B00000000,B00001110,B00000111,B10000000,B00111000,
|
||||
B00011111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000000,B00000000,B00001100,B00000111,B10000000,B00111000,
|
||||
B00001111,B11111000,B00000011,B11100001,B11111000,B01111000,B00111110,B00000001,B10000000,B00000000,B00010000,B00000111,B10000000,B00111100,
|
||||
B00000111,B11111100,B00001100,B00110000,B01110000,B00000000,B11000011,B00000001,B10000000,B00000001,B11110000,B00000111,B10000000,B00111100,
|
||||
B00000001,B11111110,B00011100,B00011000,B01110000,B00100001,B11000001,B10000001,B10000000,B00000000,B00011100,B00000111,B10000000,B00111100,
|
||||
B00000000,B00011110,B00011100,B00011100,B00111000,B00000001,B11000001,B11000001,B10000000,B00000000,B00001110,B00000111,B10000000,B00111100,
|
||||
B00000000,B00000110,B00111100,B00011100,B00111000,B01000011,B11000001,B11000001,B10000000,B00000000,B00000111,B00000111,B10000000,B00111000,
|
||||
B00000000,B00000010,B00111100,B00011100,B00011100,B00000011,B11000001,B11000001,B10000000,B00000000,B00000111,B00000111,B10000000,B00111000,
|
||||
B00000000,B00000010,B00111100,B00011100,B00011100,B10000011,B11000001,B11000001,B10000000,B00000000,B00000111,B00000111,B10000000,B00111000,
|
||||
B00010000,B00000010,B00111100,B00011100,B00001110,B00000011,B11000001,B11000001,B10000000,B00000111,B00000111,B00000111,B10000000,B01110000,
|
||||
B00010000,B00000010,B00011100,B00011100,B00001111,B00000001,B11000001,B11000001,B10000000,B00000111,B00000111,B00000111,B10000000,B01110000,
|
||||
B00011000,B00000100,B00011100,B00011000,B00000110,B00000001,B11000001,B10000001,B10000000,B00000110,B00001110,B00000111,B10000000,B11100000,
|
||||
B00011100,B00001000,B00001100,B00110000,B00000110,B00000000,B11000011,B00000001,B10000000,B00000010,B00001100,B00000111,B10000001,B11000000,
|
||||
B00010011,B11110000,B00000011,B11100000,B00000000,B00000000,B00111110,B00000111,B11100000,B00000001,B11110000,B00111111,B11111111,B00000000
|
||||
};
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* Made with Marlin Bitmap Converter
|
||||
* https://marlinfw.org/tools/u8glib/converter.html
|
||||
*
|
||||
* This bitmap from the file 'sovol.png'
|
||||
*/
|
||||
|
||||
#define CUSTOM_BOOTSCREEN_BMPWIDTH 112
|
||||
|
||||
const unsigned char custom_start_bmp[] PROGMEM = {
|
||||
B00000011,B11100100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B10000000,B00000000,B11110000,B00111111,B11111111,B00000000,
|
||||
B00000100,B00011100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000000,B00000011,B00011100,B00000111,B10000001,B11000000,
|
||||
B00001000,B00001100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000000,B00000011,B00001110,B00000111,B10000000,B11100000,
|
||||
B00010000,B00000100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000000,B00000011,B00001110,B00000111,B10000000,B01110000,
|
||||
B00010000,B00000100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000000,B00000011,B00001110,B00000111,B10000000,B01110000,
|
||||
B00011000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000000,B00000000,B00001110,B00000111,B10000000,B00111000,
|
||||
B00011100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000000,B00000000,B00001110,B00000111,B10000000,B00111000,
|
||||
B00011111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000000,B00000000,B00001100,B00000111,B10000000,B00111000,
|
||||
B00001111,B11111000,B00000011,B11100001,B11111000,B01111000,B00111110,B00000001,B10000000,B00000000,B00010000,B00000111,B10000000,B00111100,
|
||||
B00000111,B11111100,B00001100,B00110000,B01110000,B00000000,B11000011,B00000001,B10000000,B00000001,B11110000,B00000111,B10000000,B00111100,
|
||||
B00000001,B11111110,B00011100,B00011000,B01110000,B00100001,B11000001,B10000001,B10000000,B00000000,B00011100,B00000111,B10000000,B00111100,
|
||||
B00000000,B00011110,B00011100,B00011100,B00111000,B00000001,B11000001,B11000001,B10000000,B00000000,B00001110,B00000111,B10000000,B00111100,
|
||||
B00000000,B00000110,B00111100,B00011100,B00111000,B01000011,B11000001,B11000001,B10000000,B00000000,B00000111,B00000111,B10000000,B00111000,
|
||||
B00000000,B00000010,B00111100,B00011100,B00011100,B00000011,B11000001,B11000001,B10000000,B00000000,B00000111,B00000111,B10000000,B00111000,
|
||||
B00000000,B00000010,B00111100,B00011100,B00011100,B10000011,B11000001,B11000001,B10000000,B00000000,B00000111,B00000111,B10000000,B00111000,
|
||||
B00010000,B00000010,B00111100,B00011100,B00001110,B00000011,B11000001,B11000001,B10000000,B00000111,B00000111,B00000111,B10000000,B01110000,
|
||||
B00010000,B00000010,B00011100,B00011100,B00001111,B00000001,B11000001,B11000001,B10000000,B00000111,B00000111,B00000111,B10000000,B01110000,
|
||||
B00011000,B00000100,B00011100,B00011000,B00000110,B00000001,B11000001,B10000001,B10000000,B00000110,B00001110,B00000111,B10000000,B11100000,
|
||||
B00011100,B00001000,B00001100,B00110000,B00000110,B00000000,B11000011,B00000001,B10000000,B00000010,B00001100,B00000111,B10000001,B11000000,
|
||||
B00010011,B11110000,B00000011,B11100000,B00000000,B00000000,B00111110,B00000111,B11100000,B00000001,B11110000,B00111111,B11111111,B00000000
|
||||
};
|
||||
|
|
|
|||
|
|
@ -1,50 +1,49 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* Custom Status Screen bitmap
|
||||
*
|
||||
* Place this file in the root with your configuration files
|
||||
* and enable CUSTOM_STATUS_SCREEN_IMAGE in Configuration.h.
|
||||
*
|
||||
* Use the Marlin Bitmap Converter to make your own:
|
||||
* https://marlinfw.org/tools/u8glib/converter.html
|
||||
*/
|
||||
|
||||
#define STATUS_LOGO_Y 8
|
||||
#define STATUS_LOGO_WIDTH 32
|
||||
|
||||
const unsigned char status_logo_bmp[] PROGMEM = {
|
||||
B00011110,B11110111,B10011100,B00000100,
|
||||
B00111111,B01100011,B00111110,B00001100,
|
||||
B01100011,B01100011,B01100011,B00111100,
|
||||
B01100000,B01100011,B01100011,B00001100,
|
||||
B01100000,B01100011,B01100011,B00001100,
|
||||
B00111100,B01100011,B01100011,B00001100,
|
||||
B00011110,B00110110,B01100011,B00001100,
|
||||
B00000011,B00110110,B01100011,B00001100,
|
||||
B00000011,B00110110,B01100011,B00001100,
|
||||
B01100011,B00011100,B01100011,B00001100,
|
||||
B01111110,B00011100,B00111110,B00111111,
|
||||
B00111100,B00001000,B00011100,B00111111
|
||||
};
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* Custom Status Screen bitmap
|
||||
*
|
||||
* Place this file in the root with your configuration files
|
||||
* and enable CUSTOM_STATUS_SCREEN_IMAGE in Configuration.h.
|
||||
*
|
||||
* Use the Marlin Bitmap Converter to make your own:
|
||||
* https://marlinfw.org/tools/u8glib/converter.html
|
||||
*/
|
||||
|
||||
#define STATUS_LOGO_WIDTH 32
|
||||
|
||||
const unsigned char status_logo_bmp[] PROGMEM = {
|
||||
B00011110,B11110111,B10011100,B00000100,
|
||||
B00111111,B01100011,B00111110,B00001100,
|
||||
B01100011,B01100011,B01100011,B00111100,
|
||||
B01100000,B01100011,B01100011,B00001100,
|
||||
B01100000,B01100011,B01100011,B00001100,
|
||||
B00111100,B01100011,B01100011,B00001100,
|
||||
B00011110,B00110110,B01100011,B00001100,
|
||||
B00000011,B00110110,B01100011,B00001100,
|
||||
B00000011,B00110110,B01100011,B00001100,
|
||||
B01100011,B00011100,B01100011,B00001100,
|
||||
B01111110,B00011100,B00111110,B00111111,
|
||||
B00111100,B00001000,B00011100,B00111111
|
||||
};
|
||||
|
|
|
|||
|
|
@ -137,7 +137,7 @@
|
|||
//#define BLUETOOTH
|
||||
|
||||
// Name displayed in the LCD "Ready" message and Info menu
|
||||
#define CUSTOM_MACHINE_NAME "SOVOL SV01"
|
||||
#define CUSTOM_MACHINE_NAME "Sovol SV01"
|
||||
|
||||
// Printer's unique ID, used by some programs to differentiate between machines.
|
||||
// Choose your own or use a service like https://www.uuidgenerator.net/version4
|
||||
|
|
@ -404,7 +404,7 @@
|
|||
* Specify whether the power supply is active HIGH or active LOW.
|
||||
*/
|
||||
//#define PSU_CONTROL
|
||||
#define PSU_NAME "MEAN WELL"
|
||||
#define PSU_NAME "Mean Well"
|
||||
|
||||
#if ENABLED(PSU_CONTROL)
|
||||
//#define MKS_PWC // Using the MKS PWC add-on
|
||||
|
|
|
|||
|
|
@ -1,56 +1,56 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* Custom Boot Screen bitmap
|
||||
*
|
||||
* Place this file in the root with your configuration files
|
||||
* and enable SHOW_CUSTOM_BOOTSCREEN in Configuration.h.
|
||||
*
|
||||
* Use the Marlin Bitmap Converter to make your own:
|
||||
* https://marlinfw.org/tools/u8glib/converter.html
|
||||
*/
|
||||
#define CUSTOM_BOOTSCREEN_BMPWIDTH 112
|
||||
|
||||
const unsigned char custom_start_bmp[] PROGMEM = {
|
||||
B00000011,B11100100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B10000000,B00000000,B11110000,B00111111,B11111111,B00000000,
|
||||
B00000100,B00011100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000000,B00000011,B00011100,B00000111,B10000001,B11000000,
|
||||
B00001000,B00001100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000000,B00000011,B00001110,B00000111,B10000000,B11100000,
|
||||
B00010000,B00000100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000000,B00000011,B00001110,B00000111,B10000000,B01110000,
|
||||
B00010000,B00000100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000000,B00000011,B00001110,B00000111,B10000000,B01110000,
|
||||
B00011000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000000,B00000000,B00001110,B00000111,B10000000,B00111000,
|
||||
B00011100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000000,B00000000,B00001110,B00000111,B10000000,B00111000,
|
||||
B00011111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000000,B00000000,B00001100,B00000111,B10000000,B00111000,
|
||||
B00001111,B11111000,B00000011,B11100001,B11111000,B01111000,B00111110,B00000001,B10000000,B00000000,B00010000,B00000111,B10000000,B00111100,
|
||||
B00000111,B11111100,B00001100,B00110000,B01110000,B00000000,B11000011,B00000001,B10000000,B00000001,B11110000,B00000111,B10000000,B00111100,
|
||||
B00000001,B11111110,B00011100,B00011000,B01110000,B00100001,B11000001,B10000001,B10000000,B00000000,B00011100,B00000111,B10000000,B00111100,
|
||||
B00000000,B00011110,B00011100,B00011100,B00111000,B00000001,B11000001,B11000001,B10000000,B00000000,B00001110,B00000111,B10000000,B00111100,
|
||||
B00000000,B00000110,B00111100,B00011100,B00111000,B01000011,B11000001,B11000001,B10000000,B00000000,B00000111,B00000111,B10000000,B00111000,
|
||||
B00000000,B00000010,B00111100,B00011100,B00011100,B00000011,B11000001,B11000001,B10000000,B00000000,B00000111,B00000111,B10000000,B00111000,
|
||||
B00000000,B00000010,B00111100,B00011100,B00011100,B10000011,B11000001,B11000001,B10000000,B00000000,B00000111,B00000111,B10000000,B00111000,
|
||||
B00010000,B00000010,B00111100,B00011100,B00001110,B00000011,B11000001,B11000001,B10000000,B00000111,B00000111,B00000111,B10000000,B01110000,
|
||||
B00010000,B00000010,B00011100,B00011100,B00001111,B00000001,B11000001,B11000001,B10000000,B00000111,B00000111,B00000111,B10000000,B01110000,
|
||||
B00011000,B00000100,B00011100,B00011000,B00000110,B00000001,B11000001,B10000001,B10000000,B00000110,B00001110,B00000111,B10000000,B11100000,
|
||||
B00011100,B00001000,B00001100,B00110000,B00000110,B00000000,B11000011,B00000001,B10000000,B00000010,B00001100,B00000111,B10000001,B11000000,
|
||||
B00010011,B11110000,B00000011,B11100000,B00000000,B00000000,B00111110,B00000111,B11100000,B00000001,B11110000,B00111111,B11111111,B00000000
|
||||
};
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* Custom Boot Screen bitmap
|
||||
*
|
||||
* Place this file in the root with your configuration files
|
||||
* and enable SHOW_CUSTOM_BOOTSCREEN in Configuration.h.
|
||||
*
|
||||
* Use the Marlin Bitmap Converter to make your own:
|
||||
* https://marlinfw.org/tools/u8glib/converter.html
|
||||
*/
|
||||
#define CUSTOM_BOOTSCREEN_BMPWIDTH 112
|
||||
|
||||
const unsigned char custom_start_bmp[] PROGMEM = {
|
||||
B00000011,B11100100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B10000000,B00000000,B11110000,B00111111,B11111111,B00000000,
|
||||
B00000100,B00011100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000000,B00000011,B00011100,B00000111,B10000001,B11000000,
|
||||
B00001000,B00001100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000000,B00000011,B00001110,B00000111,B10000000,B11100000,
|
||||
B00010000,B00000100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000000,B00000011,B00001110,B00000111,B10000000,B01110000,
|
||||
B00010000,B00000100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000000,B00000011,B00001110,B00000111,B10000000,B01110000,
|
||||
B00011000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000000,B00000000,B00001110,B00000111,B10000000,B00111000,
|
||||
B00011100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000000,B00000000,B00001110,B00000111,B10000000,B00111000,
|
||||
B00011111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000000,B00000000,B00001100,B00000111,B10000000,B00111000,
|
||||
B00001111,B11111000,B00000011,B11100001,B11111000,B01111000,B00111110,B00000001,B10000000,B00000000,B00010000,B00000111,B10000000,B00111100,
|
||||
B00000111,B11111100,B00001100,B00110000,B01110000,B00000000,B11000011,B00000001,B10000000,B00000001,B11110000,B00000111,B10000000,B00111100,
|
||||
B00000001,B11111110,B00011100,B00011000,B01110000,B00100001,B11000001,B10000001,B10000000,B00000000,B00011100,B00000111,B10000000,B00111100,
|
||||
B00000000,B00011110,B00011100,B00011100,B00111000,B00000001,B11000001,B11000001,B10000000,B00000000,B00001110,B00000111,B10000000,B00111100,
|
||||
B00000000,B00000110,B00111100,B00011100,B00111000,B01000011,B11000001,B11000001,B10000000,B00000000,B00000111,B00000111,B10000000,B00111000,
|
||||
B00000000,B00000010,B00111100,B00011100,B00011100,B00000011,B11000001,B11000001,B10000000,B00000000,B00000111,B00000111,B10000000,B00111000,
|
||||
B00000000,B00000010,B00111100,B00011100,B00011100,B10000011,B11000001,B11000001,B10000000,B00000000,B00000111,B00000111,B10000000,B00111000,
|
||||
B00010000,B00000010,B00111100,B00011100,B00001110,B00000011,B11000001,B11000001,B10000000,B00000111,B00000111,B00000111,B10000000,B01110000,
|
||||
B00010000,B00000010,B00011100,B00011100,B00001111,B00000001,B11000001,B11000001,B10000000,B00000111,B00000111,B00000111,B10000000,B01110000,
|
||||
B00011000,B00000100,B00011100,B00011000,B00000110,B00000001,B11000001,B10000001,B10000000,B00000110,B00001110,B00000111,B10000000,B11100000,
|
||||
B00011100,B00001000,B00001100,B00110000,B00000110,B00000000,B11000011,B00000001,B10000000,B00000010,B00001100,B00000111,B10000001,B11000000,
|
||||
B00010011,B11110000,B00000011,B11100000,B00000000,B00000000,B00111110,B00000111,B11100000,B00000001,B11110000,B00111111,B11111111,B00000000
|
||||
};
|
||||
|
|
|
|||
|
|
@ -1,50 +1,50 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* Custom Status Screen bitmap
|
||||
*
|
||||
* Place this file in the root with your configuration files
|
||||
* and enable CUSTOM_STATUS_SCREEN_IMAGE in Configuration.h.
|
||||
*
|
||||
* Use the Marlin Bitmap Converter to make your own:
|
||||
* https://marlinfw.org/tools/u8glib/converter.html
|
||||
*/
|
||||
|
||||
#define STATUS_LOGO_Y 8
|
||||
#define STATUS_LOGO_WIDTH 32
|
||||
|
||||
const unsigned char status_logo_bmp[] PROGMEM = {
|
||||
B00011110,B11110111,B10011100,B00000100,
|
||||
B00111111,B01100011,B00111110,B00001100,
|
||||
B01100011,B01100011,B01100011,B00111100,
|
||||
B01100000,B01100011,B01100011,B00001100,
|
||||
B01100000,B01100011,B01100011,B00001100,
|
||||
B00111100,B01100011,B01100011,B00001100,
|
||||
B00011110,B00110110,B01100011,B00001100,
|
||||
B00000011,B00110110,B01100011,B00001100,
|
||||
B00000011,B00110110,B01100011,B00001100,
|
||||
B01100011,B00011100,B01100011,B00001100,
|
||||
B01111110,B00011100,B00111110,B00111111,
|
||||
B00111100,B00001000,B00011100,B00111111
|
||||
};
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* Custom Status Screen bitmap
|
||||
*
|
||||
* Place this file in the root with your configuration files
|
||||
* and enable CUSTOM_STATUS_SCREEN_IMAGE in Configuration.h.
|
||||
*
|
||||
* Use the Marlin Bitmap Converter to make your own:
|
||||
* https://marlinfw.org/tools/u8glib/converter.html
|
||||
*/
|
||||
|
||||
#define STATUS_LOGO_Y 8
|
||||
#define STATUS_LOGO_WIDTH 32
|
||||
|
||||
const unsigned char status_logo_bmp[] PROGMEM = {
|
||||
B00011110,B11110111,B10011100,B00000100,
|
||||
B00111111,B01100011,B00111110,B00001100,
|
||||
B01100011,B01100011,B01100011,B00111100,
|
||||
B01100000,B01100011,B01100011,B00001100,
|
||||
B01100000,B01100011,B01100011,B00001100,
|
||||
B00111100,B01100011,B01100011,B00001100,
|
||||
B00011110,B00110110,B01100011,B00001100,
|
||||
B00000011,B00110110,B01100011,B00001100,
|
||||
B00000011,B00110110,B01100011,B00001100,
|
||||
B01100011,B00011100,B01100011,B00001100,
|
||||
B01111110,B00011100,B00111110,B00111111,
|
||||
B00111100,B00001000,B00011100,B00111111
|
||||
};
|
||||
|
|
|
|||
Loading…
Add table
Add a link
Reference in a new issue