3D-printing/Configurations
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Configurations.git synced 2025-07-25 15:44:14 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions

🔧 Improve Creality CR-10 V3 (#550)

Browse source
This commit is contained in:
Pyre 2021-08-08 06:30:45 +02:00 • committed by GitHub
parent e59d7736e3
commit 9c8e2b3802
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
7 changed files with 80 additions and 76 deletions
Download patch file Download diff file Expand all files Collapse all files

3
config/examples/Creality/CR-10 V2/Configuration.h
View file

@ -518,7 +518,7 @@
//#define MAX31865_SENSOR_OHMS_1 100 //#define MAX31865_SENSOR_OHMS_1 100
//#define MAX31865_CALIBRATION_OHMS_1 430 //#define MAX31865_CALIBRATION_OHMS_1 430
#define TEMP_RESIDENCY_TIME 2 // (seconds) Time to wait for hotend to "settle" in M109 #define TEMP_RESIDENCY_TIME 5 // (seconds) Time to wait for hotend to "settle" in M109
#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
@ -1035,6 +1035,7 @@
#if ENABLED(CR10V2_BLTOUCH) #if ENABLED(CR10V2_BLTOUCH)
#define USE_PROBE_FOR_Z_HOMING #define USE_PROBE_FOR_Z_HOMING
#endif #endif
/** /**
* Z_MIN_PROBE_PIN * Z_MIN_PROBE_PIN
* *

1
config/examples/Creality/CR-10 V2/Configuration_adv.h
View file

@ -1867,6 +1867,7 @@
//#define BABYSTEP_MILLIMETER_UNITS // Specify BABYSTEP_MULTIPLICATOR_(XY|Z) in mm instead of micro-steps //#define BABYSTEP_MILLIMETER_UNITS // Specify BABYSTEP_MULTIPLICATOR_(XY|Z) in mm instead of micro-steps
#define BABYSTEP_MULTIPLICATOR_Z 4 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_Z 4 // (steps or mm) Steps or millimeter distance for each Z babystep
#define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep
#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
#if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING)
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.

67
config/examples/Creality/CR-10 V3/Configuration.h
View file

@ -518,11 +518,11 @@
//#define MAX31865_SENSOR_OHMS_1 100 //#define MAX31865_SENSOR_OHMS_1 100
//#define MAX31865_CALIBRATION_OHMS_1 430 //#define MAX31865_CALIBRATION_OHMS_1 430
#define TEMP_RESIDENCY_TIME 2 // (seconds) Time to wait for hotend to "settle" in M109 #define TEMP_RESIDENCY_TIME 5 // (seconds) Time to wait for hotend to "settle" in M109
#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_BED_RESIDENCY_TIME 5 // (seconds) Time to wait for bed to "settle" in M190 #define TEMP_BED_RESIDENCY_TIME 8 // (seconds) Time to wait for bed to "settle" in M190
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
@ -562,7 +562,7 @@
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
// (Use MINTEMP for thermistor short/failure protection.) // (Use MINTEMP for thermistor short/failure protection.)
#define HEATER_0_MAXTEMP 255 #define HEATER_0_MAXTEMP 275
#define HEATER_1_MAXTEMP 275 #define HEATER_1_MAXTEMP 275
#define HEATER_2_MAXTEMP 275 #define HEATER_2_MAXTEMP 275
#define HEATER_3_MAXTEMP 275 #define HEATER_3_MAXTEMP 275
@ -926,18 +926,18 @@
* X, Y, Z [, I [, J [, K]]], E0 [, E1[, E2...]] * X, Y, Z [, I [, J [, K]]], E0 [, E1[, E2...]]
* Updated E Steps to 382.14 for CR10-V3 Direct Drive * Updated E Steps to 382.14 for CR10-V3 Direct Drive
*/ */
#define DEFAULT_AXIS_STEPS_PER_UNIT { 80.00, 80.00, 400.00, 382.14 } #define DEFAULT_AXIS_STEPS_PER_UNIT { 80.00, 80.00, 400.00, 407 }
/** /**
* Default Max Feed Rate (mm/s) * Default Max Feed Rate (mm/s)
* Override with M203 * Override with M203
* X, Y, Z [, I [, J [, K]]], E0 [, E1[, E2...]] * X, Y, Z [, I [, J [, K]]], E0 [, E1[, E2...]]
*/ */
#define DEFAULT_MAX_FEEDRATE { 750, 750, 15, 75 } #define DEFAULT_MAX_FEEDRATE { 200, 200, 14, 25 }
//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2
#if ENABLED(LIMITED_MAX_FR_EDITING) #if ENABLED(LIMITED_MAX_FR_EDITING)
#define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits #define MAX_FEEDRATE_EDIT_VALUES { 200, 200, 14, 25 } // ...or, set your own edit limits
#endif #endif
/** /**
@ -946,7 +946,7 @@
* Override with M201 * Override with M201
* X, Y, Z [, I [, J [, K]]], E0 [, E1[, E2...]] * X, Y, Z [, I [, J [, K]]], E0 [, E1[, E2...]]
*/ */
#define DEFAULT_MAX_ACCELERATION { 2000, 2000, 100, 5000 } #define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 1000 }
//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2
#if ENABLED(LIMITED_MAX_ACCEL_EDITING) #if ENABLED(LIMITED_MAX_ACCEL_EDITING)
@ -961,9 +961,9 @@
* M204 R Retract Acceleration * M204 R Retract Acceleration
* M204 T Travel Acceleration * M204 T Travel Acceleration
*/ */
#define DEFAULT_ACCELERATION 800 // X, Y, Z and E acceleration for printing moves #define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves
#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts #define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 800 // X, Y, Z acceleration for travel (non printing) moves #define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves
/** /**
* Default Jerk limits (mm/s) * Default Jerk limits (mm/s)
@ -1187,17 +1187,18 @@
* | [-] | * | [-] |
* O-- FRONT --+ * O-- FRONT --+
*/ */
#define NOZZLE_TO_PROBE_OFFSET { 47, 0, 0 } #define NOZZLE_TO_PROBE_OFFSET { 46, 2, 0 }
// Most probes should stay away from the edges of the bed, but // Most probes should stay away from the edges of the bed, but
// with NOZZLE_AS_PROBE this can be negative for a wider probing area. // with NOZZLE_AS_PROBE this can be negative for a wider probing area.
#define PROBING_MARGIN 10 #define PROBING_MARGIN 10
#define PROBING_MARGIN_LEFT 45
// X and Y axis travel speed (mm/min) between probes // X and Y axis travel speed (mm/min) between probes
#define XY_PROBE_FEEDRATE (150*60) #define XY_PROBE_FEEDRATE (200*60)
// Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2)
#define Z_PROBE_FEEDRATE_FAST (6*60) #define Z_PROBE_FEEDRATE_FAST (14*60)
// Feedrate (mm/min) for the "accurate" probe of each point // Feedrate (mm/min) for the "accurate" probe of each point
#define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) #define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2)
@ -1256,11 +1257,11 @@
* But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle.
*/ */
#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow
#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points #define Z_CLEARANCE_BETWEEN_PROBES 3 // Stock: 5 - Z Clearance between probe points
#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes #define Z_CLEARANCE_MULTI_PROBE 3 // Stock: 5 - Z Clearance between multiple probes
#define Z_AFTER_PROBING 5 // Z position after probing is done #define Z_AFTER_PROBING 100 // Z position after probing is done
#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping #define Z_PROBE_LOW_POINT -1 // Farthest distance below the trigger-point to go before stopping
// For M851 give a range for adjusting the Z probe offset // For M851 give a range for adjusting the Z probe offset
#define Z_PROBE_OFFSET_RANGE_MIN -9 #define Z_PROBE_OFFSET_RANGE_MIN -9
@ -1380,12 +1381,12 @@
// @section machine // @section machine
// The size of the printable area // The size of the printable area
#define X_BED_SIZE 310 // Nozzle is at X0 when homed #define X_BED_SIZE 300 // Nozzle is at X0 when homed
#define Y_BED_SIZE 310 // Nozzle is at Y0 when homed #define Y_BED_SIZE 300 // Nozzle is at Y0 when homed
// Travel limits (mm) after homing, corresponding to endstop positions. // Travel limits (mm) after homing, corresponding to endstop positions.
#define X_MIN_POS 0 #define X_MIN_POS -5 // -5 instead of 0 to center the print area (CR-10 v3)
#define Y_MIN_POS 0 #define Y_MIN_POS -5 // -5 instead of 0 to center the print area (CR-10 v3)
#define Z_MIN_POS 0 #define Z_MIN_POS 0
#define X_MAX_POS X_BED_SIZE #define X_MAX_POS X_BED_SIZE
#define Y_MAX_POS Y_BED_SIZE #define Y_MAX_POS Y_BED_SIZE
@ -1452,8 +1453,8 @@
#define FIL_RUNOUT_PIN 2 // Creality CR10-S stock sensor #define FIL_RUNOUT_PIN 2 // Creality CR10-S stock sensor
#define FIL_RUNOUT_STATE LOW // Pin state indicating that filament is NOT present. #define FIL_RUNOUT_STATE LOW // Pin state indicating that filament is NOT present.
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. #define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
//#define WATCH_ALL_RUNOUT_SENSORS // Execute runout script on any triggering sensor, not only for the active extruder. //#define WATCH_ALL_RUNOUT_SENSORS // Execute runout script on any triggering sensor, not only for the active extruder.
// This is automatically enabled for MIXING_EXTRUDERs. // This is automatically enabled for MIXING_EXTRUDERs.
@ -1694,14 +1695,14 @@
#endif #endif
// Add a menu item to move between bed corners for manual bed adjustment // Add a menu item to move between bed corners for manual bed adjustment
//#define LEVEL_BED_CORNERS #define LEVEL_BED_CORNERS
#if ENABLED(LEVEL_BED_CORNERS) #if ENABLED(LEVEL_BED_CORNERS)
#define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets #define LEVEL_CORNERS_INSET_LFRB { 45, 45, 45, 45 } // (mm) Left, Front, Right, Back insets
#define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points
#define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points
//#define LEVEL_CENTER_TOO // Move to the center after the last corner #define LEVEL_CENTER_TOO // Move to the center after the last corner
//#define LEVEL_CORNERS_USE_PROBE #define LEVEL_CORNERS_USE_PROBE
#if ENABLED(LEVEL_CORNERS_USE_PROBE) #if ENABLED(LEVEL_CORNERS_USE_PROBE)
#define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1
#define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify
@ -1765,7 +1766,7 @@
#endif #endif
// Homing speeds (mm/min) // Homing speeds (mm/min)
#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (6*60) } #define HOMING_FEEDRATE_MM_M { (80*60), (80*60), (10*60) }
// Validate that endstops are triggered on homing moves // Validate that endstops are triggered on homing moves
#define VALIDATE_HOMING_ENDSTOPS #define VALIDATE_HOMING_ENDSTOPS
@ -1902,12 +1903,12 @@
#if ENABLED(NOZZLE_PARK_FEATURE) #if ENABLED(NOZZLE_PARK_FEATURE)
// Specify a park position as { X, Y, Z_raise } // Specify a park position as { X, Y, Z_raise }
#define NOZZLE_PARK_POINT { (X_MIN_POS + 5), (Y_MAX_POS - 5), 10 } #define NOZZLE_PARK_POINT { (X_MIN_POS + 5), (Y_MAX_POS - 5), 100 }
//#define NOZZLE_PARK_X_ONLY // X move only is required to park //#define NOZZLE_PARK_X_ONLY // X move only is required to park
//#define NOZZLE_PARK_Y_ONLY // Y move only is required to park //#define NOZZLE_PARK_Y_ONLY // Y move only is required to park
#define NOZZLE_PARK_Z_RAISE_MIN 2 // (mm) Always raise Z by at least this distance #define NOZZLE_PARK_Z_RAISE_MIN 2 // (mm) Always raise Z by at least this distance
#define NOZZLE_PARK_XY_FEEDRATE 80 // (mm/s) X and Y axes feedrate (also used for delta Z axis) #define NOZZLE_PARK_XY_FEEDRATE 200 // (mm/s) X and Y axes feedrate (also used for delta Z axis)
#define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) #define NOZZLE_PARK_Z_FEEDRATE 14 // (mm/s) Z axis feedrate (not used for delta printers)
#endif #endif
/** /**
@ -2833,7 +2834,7 @@
// Set number of user-controlled fans. Disable to use all board-defined fans. // Set number of user-controlled fans. Disable to use all board-defined fans.
// :[1,2,3,4,5,6,7,8] // :[1,2,3,4,5,6,7,8]
//#define NUM_M106_FANS 1 #define NUM_M106_FANS 1
// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino // Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino
//#define FAST_PWM_FAN //#define FAST_PWM_FAN

44
config/examples/Creality/CR-10 V3/Configuration_adv.h
View file

@ -928,11 +928,11 @@
// //
// Add the G35 command to read bed corners to help adjust screws. Requires a bed probe. // Add the G35 command to read bed corners to help adjust screws. Requires a bed probe.
// //
//#define ASSISTED_TRAMMING #define ASSISTED_TRAMMING
#if ENABLED(ASSISTED_TRAMMING) #if ENABLED(ASSISTED_TRAMMING)
// Define positions for probe points. // Define positions for probe points.
#define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } #define TRAMMING_POINT_XY { { 45, 20 }, { 280, 20 }, { 280, 280 }, { 45, 280 } }
// Define position names for probe points. // Define position names for probe points.
#define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_1 "Front-Left"
@ -943,7 +943,7 @@
#define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation
//#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first
//#define ASSISTED_TRAMMING_WIZARD // Add a Tramming Wizard to the LCD menu #define ASSISTED_TRAMMING_WIZARD // Add a Tramming Wizard to the LCD menu
//#define ASSISTED_TRAMMING_WAIT_POSITION { X_CENTER, Y_CENTER, 30 } // Move the nozzle out of the way for adjustment //#define ASSISTED_TRAMMING_WAIT_POSITION { X_CENTER, Y_CENTER, 30 } // Move the nozzle out of the way for adjustment
@ -1247,7 +1247,7 @@
//#define TURBO_BACK_MENU_ITEM //#define TURBO_BACK_MENU_ITEM
// Add a mute option to the LCD menu // Add a mute option to the LCD menu
//#define SOUND_MENU_ITEM #define SOUND_MENU_ITEM
/** /**
* LED Control Menu * LED Control Menu
@ -1382,14 +1382,14 @@
*/ */
#define POWER_LOSS_RECOVERY #define POWER_LOSS_RECOVERY
#if ENABLED(POWER_LOSS_RECOVERY) #if ENABLED(POWER_LOSS_RECOVERY)
#define PLR_ENABLED_DEFAULT false // Power Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) #define PLR_ENABLED_DEFAULT true // Power Loss Recovery enabled by default. (Set with 'M413 Sn' & M500)
//#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss
//#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS)
//#define POWER_LOSS_PIN 44 // Pin to detect power loss. Set to -1 to disable default pin on boards without module. //#define POWER_LOSS_PIN 44 // Pin to detect power loss. Set to -1 to disable default pin on boards without module.
//#define POWER_LOSS_STATE HIGH // State of pin indicating power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
//#define POWER_LOSS_PULLUP // Set pullup / pulldown as appropriate for your sensor //#define POWER_LOSS_PULLUP // Set pullup / pulldown as appropriate for your sensor
//#define POWER_LOSS_PULLDOWN //#define POWER_LOSS_PULLDOWN
//#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_PURGE_LEN 11 // (mm) Length of filament to purge on resume
//#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power.
// Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
@ -1435,8 +1435,8 @@
#define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 G-code. #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 G-code.
#define SDSORT_USES_RAM true // Pre-allocate a static array for faster pre-sorting. #define SDSORT_USES_RAM true // Pre-allocate a static array for faster pre-sorting.
#define SDSORT_USES_STACK true // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) #define SDSORT_USES_STACK true // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.)
#define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. #define SDSORT_CACHE_NAMES true // Keep sorted items in RAM longer for speedy performance. Most expensive option.
#define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! #define SDSORT_DYNAMIC_RAM true // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use!
#define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting.
// Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
#endif #endif
@ -2391,7 +2391,7 @@
// This short retract is done immediately, before parking the nozzle. // This short retract is done immediately, before parking the nozzle.
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 40 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 40 // (mm/s) Unload filament feedrate. This can be pretty fast.
#define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate.
#define FILAMENT_CHANGE_UNLOAD_LENGTH 435 // (mm) The length of filament for a complete unload. #define FILAMENT_CHANGE_UNLOAD_LENGTH 40 // (mm) The length of filament for a complete unload.
// For Bowden, the full length of the tube and nozzle. // For Bowden, the full length of the tube and nozzle.
// For direct drive, the full length of the nozzle. // For direct drive, the full length of the nozzle.
// Set to 0 for manual unloading. // Set to 0 for manual unloading.
@ -2400,7 +2400,7 @@
// 0 to disable start loading and skip to fast load only // 0 to disable start loading and skip to fast load only
#define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 30 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 30 // (mm/s) Load filament feedrate. This can be pretty fast.
#define FILAMENT_CHANGE_FAST_LOAD_ACCEL 15 // (mm/s^2) Lower acceleration may allow a faster feedrate. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 15 // (mm/s^2) Lower acceleration may allow a faster feedrate.
#define FILAMENT_CHANGE_FAST_LOAD_LENGTH 430 // (mm) Load length of filament, from extruder gear to nozzle. #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle.
// For Bowden, the full length of the tube and nozzle. // For Bowden, the full length of the tube and nozzle.
// For direct drive, the full length of the nozzle. // For direct drive, the full length of the nozzle.
//#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted.
@ -2413,12 +2413,12 @@
#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. #define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused.
// Filament Unload does a Retract, Delay, and Purge first: // Filament Unload does a Retract, Delay, and Purge first:
#define FILAMENT_UNLOAD_PURGE_RETRACT 4 // (mm) Unload initial retract length. #define FILAMENT_UNLOAD_PURGE_RETRACT 6 // (mm) Unload initial retract length.
#define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract.
#define FILAMENT_UNLOAD_PURGE_LENGTH 0 // (mm) An unretract is done, then this length is purged. #define FILAMENT_UNLOAD_PURGE_LENGTH 2 // (mm) An unretract is done, then this length is purged.
#define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload
#define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. #define PAUSE_PARK_NOZZLE_TIMEOUT 180 // (seconds) Time limit before the nozzle is turned off for safety.
#define FILAMENT_CHANGE_ALERT_BEEPS 2 // Number of alert beeps to play when a response is needed. #define FILAMENT_CHANGE_ALERT_BEEPS 2 // Number of alert beeps to play when a response is needed.
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change.
@ -3722,7 +3722,7 @@
*/ */
// Custom Menu: Main Menu // Custom Menu: Main Menu
//#define CUSTOM_MENU_MAIN #define CUSTOM_MENU_MAIN
#if ENABLED(CUSTOM_MENU_MAIN) #if ENABLED(CUSTOM_MENU_MAIN)
//#define CUSTOM_MENU_MAIN_TITLE "Custom Commands" //#define CUSTOM_MENU_MAIN_TITLE "Custom Commands"
#define CUSTOM_MENU_MAIN_SCRIPT_DONE "M117 User Script Done" #define CUSTOM_MENU_MAIN_SCRIPT_DONE "M117 User Script Done"
@ -3730,12 +3730,12 @@
//#define CUSTOM_MENU_MAIN_SCRIPT_RETURN // Return to status screen after a script //#define CUSTOM_MENU_MAIN_SCRIPT_RETURN // Return to status screen after a script
#define CUSTOM_MENU_MAIN_ONLY_IDLE // Only show custom menu when the machine is idle #define CUSTOM_MENU_MAIN_ONLY_IDLE // Only show custom menu when the machine is idle
#define MAIN_MENU_ITEM_1_DESC "Home & UBL Info" #define MAIN_MENU_ITEM_1_DESC "Park Nozzle"
#define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W" #define MAIN_MENU_ITEM_1_GCODE "G27"
//#define MAIN_MENU_ITEM_1_CONFIRM // Show a confirmation dialog before this action //#define MAIN_MENU_ITEM_1_CONFIRM // Show a confirmation dialog before this action
#define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL //#define MAIN_MENU_ITEM_2_DESC "" PREHEAT_1_LABEL
#define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) //#define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
//#define MAIN_MENU_ITEM_2_CONFIRM //#define MAIN_MENU_ITEM_2_CONFIRM
//#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
@ -4155,10 +4155,10 @@
#if ENABLED(PRINTCOUNTER) #if ENABLED(PRINTCOUNTER)
#define SERVICE_WARNING_BUZZES 3 #define SERVICE_WARNING_BUZZES 3
// Activate up to 3 service interval watchdogs // Activate up to 3 service interval watchdogs
//#define SERVICE_NAME_1 "Service S" #define SERVICE_NAME_1 "Service 50h"
//#define SERVICE_INTERVAL_1 100 // print hours #define SERVICE_INTERVAL_1 50 // print hours
//#define SERVICE_NAME_2 "Service L" #define SERVICE_NAME_2 "Service 300h"
//#define SERVICE_INTERVAL_2 200 // print hours #define SERVICE_INTERVAL_2 300 // print hours
//#define SERVICE_NAME_3 "Service 3" //#define SERVICE_NAME_3 "Service 3"
//#define SERVICE_INTERVAL_3 1 // print hours //#define SERVICE_INTERVAL_3 1 // print hours
#endif #endif

37
config/examples/Creality/CR-10 V3/_Statusscreen.h
View file

@ -31,26 +31,27 @@
* https://marlinfw.org/tools/u8glib/converter.html * https://marlinfw.org/tools/u8glib/converter.html
*/ */
#define STATUS_LOGO_Y 3 #define STATUS_LOGO_Y 5
#define STATUS_LOGO_WIDTH 40 #define STATUS_LOGO_WIDTH 32
const unsigned char status_logo_bmp[] PROGMEM = { const unsigned char status_logo_bmp[] PROGMEM = {
B00000000,B00000000,B00000000,B00000000,B00000000, B00011100,B11110000,B00010001,B11000000,
B00000000,B00000000,B00000000,B00000000,B00000000, B00100010,B10001000,B00110010,B00100000,
B00000000,B11100111,B00000001,B10001110,B00000000, B00100000,B10001000,B00010010,B00100000,
B00000001,B00010100,B10000000,B10001010,B00000000, B00100000,B11110011,B10010010,B00100000,
B00000001,B00000111,B00111000,B10001010,B00000000, B00100000,B10100000,B00010010,B00100000,
B00000001,B00010101,B00000000,B10001010,B00000000, B00100010,B10010000,B00010010,B00100000,
B00000000,B11100100,B10000001,B11001110,B00000000, B00011100,B10001000,B00111001,B11000000,
B00000000,B00000000,B00000000,B00000000,B00000000, B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000, B00000000,B00000000,B00000000,B00000000,
B00000000,B00000001,B10110111,B00000000,B00000000, B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B10100001,B00000000,B00000000, B00000000,B01000101,B11110000,B00000000,
B00000000,B00000000,B10100011,B00000000,B00000000, B00000000,B01000100,B00100000,B00000000,
B00000000,B00000000,B11100001,B00000000,B00000000, B00000000,B01000100,B01000000,B00000000,
B00000000,B00000000,B01000111,B00000000,B00000000, B00000000,B01000100,B00100000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000, B00000000,B01000100,B00010000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000 B00000000,B00101001,B00010000,B00000000,
B00000000,B00010000,B11100000,B00000000,
}; };
// //

2
config/examples/Velleman/K8400/Dual-head/Configuration.h
View file

@ -511,7 +511,7 @@
//#define MAX31865_SENSOR_OHMS_1 100 //#define MAX31865_SENSOR_OHMS_1 100
//#define MAX31865_CALIBRATION_OHMS_1 430 //#define MAX31865_CALIBRATION_OHMS_1 430
#define TEMP_RESIDENCY_TIME 2 // (seconds) Time to wait for hotend to "settle" in M109 #define TEMP_RESIDENCY_TIME 5 // (seconds) Time to wait for hotend to "settle" in M109
#define TEMP_HYSTERESIS 5 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_HYSTERESIS 5 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer

2
config/examples/Velleman/K8400/Single-head/Configuration.h
View file

@ -511,7 +511,7 @@
//#define MAX31865_SENSOR_OHMS_1 100 //#define MAX31865_SENSOR_OHMS_1 100
//#define MAX31865_CALIBRATION_OHMS_1 430 //#define MAX31865_CALIBRATION_OHMS_1 430
#define TEMP_RESIDENCY_TIME 2 // (seconds) Time to wait for hotend to "settle" in M109 #define TEMP_RESIDENCY_TIME 5 // (seconds) Time to wait for hotend to "settle" in M109
#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_HYSTERESIS 5 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_HYSTERESIS 5 // (°C) Temperature proximity considered "close enough" to the target