diff --git a/config/default/Configuration.h b/config/default/Configuration.h index 9f4c39d399..80f332305a 100644 --- a/config/default/Configuration.h +++ b/config/default/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/3DFabXYZ/Migbot/Configuration.h b/config/examples/3DFabXYZ/Migbot/Configuration.h index 491ce524bc..4cbe852467 100644 --- a/config/examples/3DFabXYZ/Migbot/Configuration.h +++ b/config/examples/3DFabXYZ/Migbot/Configuration.h @@ -372,8 +372,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/ADIMLab/Gantry v1/Configuration.h b/config/examples/ADIMLab/Gantry v1/Configuration.h index 5b407fc05d..aac26851f0 100644 --- a/config/examples/ADIMLab/Gantry v1/Configuration.h +++ b/config/examples/ADIMLab/Gantry v1/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/ADIMLab/Gantry v2/Configuration.h b/config/examples/ADIMLab/Gantry v2/Configuration.h index 43ceae2e2c..59b97487fe 100644 --- a/config/examples/ADIMLab/Gantry v2/Configuration.h +++ b/config/examples/ADIMLab/Gantry v2/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Alfawise/U20-bltouch/Configuration.h b/config/examples/Alfawise/U20-bltouch/Configuration.h index 26b9329e53..9dc3e7a8c9 100644 --- a/config/examples/Alfawise/U20-bltouch/Configuration.h +++ b/config/examples/Alfawise/U20-bltouch/Configuration.h @@ -426,8 +426,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Alfawise/U20/Configuration.h b/config/examples/Alfawise/U20/Configuration.h index 51673b7eef..3d032499bf 100644 --- a/config/examples/Alfawise/U20/Configuration.h +++ b/config/examples/Alfawise/U20/Configuration.h @@ -426,8 +426,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/AliExpress/CL-260/Configuration.h b/config/examples/AliExpress/CL-260/Configuration.h index acb0951c92..93ecde777b 100644 --- a/config/examples/AliExpress/CL-260/Configuration.h +++ b/config/examples/AliExpress/CL-260/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/AliExpress/UM2pExt/Configuration.h b/config/examples/AliExpress/UM2pExt/Configuration.h index 23e54018f0..0a0d5873bf 100644 --- a/config/examples/AliExpress/UM2pExt/Configuration.h +++ b/config/examples/AliExpress/UM2pExt/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Anet/A2/Configuration.h b/config/examples/Anet/A2/Configuration.h index d67136d1a0..90143b0652 100644 --- a/config/examples/Anet/A2/Configuration.h +++ b/config/examples/Anet/A2/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Anet/A2plus/Configuration.h b/config/examples/Anet/A2plus/Configuration.h index b964c2167e..88d2182e54 100644 --- a/config/examples/Anet/A2plus/Configuration.h +++ b/config/examples/Anet/A2plus/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Anet/A6/Configuration.h b/config/examples/Anet/A6/Configuration.h index d526474052..053a1f2a89 100644 --- a/config/examples/Anet/A6/Configuration.h +++ b/config/examples/Anet/A6/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Anet/A8/Configuration.h b/config/examples/Anet/A8/Configuration.h index 4028cc1afc..a99a2286fc 100644 --- a/config/examples/Anet/A8/Configuration.h +++ b/config/examples/Anet/A8/Configuration.h @@ -372,8 +372,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Anet/A8plus/Configuration.h b/config/examples/Anet/A8plus/Configuration.h index 0a5557d04c..0e542622f9 100644 --- a/config/examples/Anet/A8plus/Configuration.h +++ b/config/examples/Anet/A8plus/Configuration.h @@ -372,8 +372,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Anet/A9/Configuration.h b/config/examples/Anet/A9/Configuration.h index a970c9ef32..f4af83cbda 100644 --- a/config/examples/Anet/A9/Configuration.h +++ b/config/examples/Anet/A9/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Anet/E10/Configuration.h b/config/examples/Anet/E10/Configuration.h index 2cd0cb5724..0833dda61a 100644 --- a/config/examples/Anet/E10/Configuration.h +++ b/config/examples/Anet/E10/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h b/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h index 8850304816..fe1c2ec058 100644 --- a/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h +++ b/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Anet/E16/Stock/Configuration.h b/config/examples/Anet/E16/Stock/Configuration.h index d51dd6830b..38281262bb 100644 --- a/config/examples/Anet/E16/Stock/Configuration.h +++ b/config/examples/Anet/E16/Stock/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Anet/ET4+/Configuration.h b/config/examples/Anet/ET4+/Configuration.h index 4c0100c7d9..48a0031b0a 100644 --- a/config/examples/Anet/ET4+/Configuration.h +++ b/config/examples/Anet/ET4+/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Anet/ET4-Pro/Configuration.h b/config/examples/Anet/ET4-Pro/Configuration.h index e74fe01550..5c039cf358 100644 --- a/config/examples/Anet/ET4-Pro/Configuration.h +++ b/config/examples/Anet/ET4-Pro/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Anet/ET4/Configuration.h b/config/examples/Anet/ET4/Configuration.h index af68b01632..0770712bb4 100644 --- a/config/examples/Anet/ET4/Configuration.h +++ b/config/examples/Anet/ET4/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Anet/ET4X/Configuration.h b/config/examples/Anet/ET4X/Configuration.h index cd60c2b3a3..c6be038545 100644 --- a/config/examples/Anet/ET4X/Configuration.h +++ b/config/examples/Anet/ET4X/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Anet/ET5-Pro/Configuration.h b/config/examples/Anet/ET5-Pro/Configuration.h index ed1b04f8d8..103a6dafcf 100644 --- a/config/examples/Anet/ET5-Pro/Configuration.h +++ b/config/examples/Anet/ET5-Pro/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Anet/ET5/Configuration.h b/config/examples/Anet/ET5/Configuration.h index c133635216..89be54a65b 100644 --- a/config/examples/Anet/ET5/Configuration.h +++ b/config/examples/Anet/ET5/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Anet/ET5X/Configuration.h b/config/examples/Anet/ET5X/Configuration.h index f093fe8da9..6758af5f68 100644 --- a/config/examples/Anet/ET5X/Configuration.h +++ b/config/examples/Anet/ET5X/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/AnyCubic/Chiron/Configuration.h b/config/examples/AnyCubic/Chiron/Configuration.h index 714484b91a..8977a693f2 100644 --- a/config/examples/AnyCubic/Chiron/Configuration.h +++ b/config/examples/AnyCubic/Chiron/Configuration.h @@ -375,8 +375,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h index a4ed57bb00..9ccf4c5fa8 100644 --- a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h +++ b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h @@ -372,8 +372,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h index 489ad6cbbe..eacf9b67e1 100644 --- a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h +++ b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h @@ -372,8 +372,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h index 29a738b87c..6fd5ce8973 100644 --- a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h +++ b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/AnyCubic/i3 Mega/Configuration.h b/config/examples/AnyCubic/i3 Mega/Configuration.h index 2bb41a3292..9e3153a95a 100644 --- a/config/examples/AnyCubic/i3 Mega/Configuration.h +++ b/config/examples/AnyCubic/i3 Mega/Configuration.h @@ -392,8 +392,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/AnyCubic/i3/Configuration.h b/config/examples/AnyCubic/i3/Configuration.h index 2d5acc9d53..c84fe658e1 100644 --- a/config/examples/AnyCubic/i3/Configuration.h +++ b/config/examples/AnyCubic/i3/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/ArmEd/Configuration.h b/config/examples/ArmEd/Configuration.h index ebf4327a0b..ae4b682ffb 100644 --- a/config/examples/ArmEd/Configuration.h +++ b/config/examples/ArmEd/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Artillery/Genius Pro/Configuration.h b/config/examples/Artillery/Genius Pro/Configuration.h index 8893ecef05..3b735e6928 100644 --- a/config/examples/Artillery/Genius Pro/Configuration.h +++ b/config/examples/Artillery/Genius Pro/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Artillery/Genius/BLTouch/Configuration.h b/config/examples/Artillery/Genius/BLTouch/Configuration.h index f247e9254e..abc42ef186 100644 --- a/config/examples/Artillery/Genius/BLTouch/Configuration.h +++ b/config/examples/Artillery/Genius/BLTouch/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Artillery/Genius/V1/Configuration.h b/config/examples/Artillery/Genius/V1/Configuration.h index 5dd20ab38b..aaa6b1549e 100644 --- a/config/examples/Artillery/Genius/V1/Configuration.h +++ b/config/examples/Artillery/Genius/V1/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Artillery/Hornet/Configuration.h b/config/examples/Artillery/Hornet/Configuration.h index ee710c9268..7110676374 100644 --- a/config/examples/Artillery/Hornet/Configuration.h +++ b/config/examples/Artillery/Hornet/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration.h b/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration.h index f17958a92f..fadb82c439 100644 --- a/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration.h +++ b/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Artillery/Sidewinder X1/V1/Configuration.h b/config/examples/Artillery/Sidewinder X1/V1/Configuration.h index 4150f078d5..46df74faf6 100644 --- a/config/examples/Artillery/Sidewinder X1/V1/Configuration.h +++ b/config/examples/Artillery/Sidewinder X1/V1/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Artillery/Sidewinder X2/Configuration.h b/config/examples/Artillery/Sidewinder X2/Configuration.h index e0be44e311..b29417119b 100644 --- a/config/examples/Artillery/Sidewinder X2/Configuration.h +++ b/config/examples/Artillery/Sidewinder X2/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Azteeg/X5GT/Configuration.h b/config/examples/Azteeg/X5GT/Configuration.h index 328c4659c0..05d9012867 100644 --- a/config/examples/Azteeg/X5GT/Configuration.h +++ b/config/examples/Azteeg/X5GT/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration.h b/config/examples/BIBO/TouchX/cyclops/Configuration.h index 0a66691bb8..a04f64e148 100644 --- a/config/examples/BIBO/TouchX/cyclops/Configuration.h +++ b/config/examples/BIBO/TouchX/cyclops/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/BIBO/TouchX/default/Configuration.h b/config/examples/BIBO/TouchX/default/Configuration.h index aaa2ae5476..690995fc84 100644 --- a/config/examples/BIBO/TouchX/default/Configuration.h +++ b/config/examples/BIBO/TouchX/default/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/BIQU/B1 - SKR 1.4/Configuration.h b/config/examples/BIQU/B1 - SKR 1.4/Configuration.h index 6ec75f70af..90f585f5be 100644 --- a/config/examples/BIQU/B1 - SKR 1.4/Configuration.h +++ b/config/examples/BIQU/B1 - SKR 1.4/Configuration.h @@ -373,8 +373,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/BIQU/B1 - SKR 2/Configuration.h b/config/examples/BIQU/B1 - SKR 2/Configuration.h index 7eb4834670..daee336225 100644 --- a/config/examples/BIQU/B1 - SKR 2/Configuration.h +++ b/config/examples/BIQU/B1 - SKR 2/Configuration.h @@ -373,8 +373,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/BIQU/B1 SE Plus/Configuration.h b/config/examples/BIQU/B1 SE Plus/Configuration.h index aed5ee3968..fef0755e1f 100644 --- a/config/examples/BIQU/B1 SE Plus/Configuration.h +++ b/config/examples/BIQU/B1 SE Plus/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/BIQU/BX/Configuration.h b/config/examples/BIQU/BX/Configuration.h index caf8b2a1a1..81f5e7bd21 100644 --- a/config/examples/BIQU/BX/Configuration.h +++ b/config/examples/BIQU/BX/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/BQ/Hephestos/Configuration.h b/config/examples/BQ/Hephestos/Configuration.h index c1ca5223e2..1b7f4818e4 100644 --- a/config/examples/BQ/Hephestos/Configuration.h +++ b/config/examples/BQ/Hephestos/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/BQ/Hephestos_2/Configuration.h b/config/examples/BQ/Hephestos_2/Configuration.h index c79c98017e..3f816531b8 100644 --- a/config/examples/BQ/Hephestos_2/Configuration.h +++ b/config/examples/BQ/Hephestos_2/Configuration.h @@ -379,8 +379,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/BQ/WITBOX/Configuration.h b/config/examples/BQ/WITBOX/Configuration.h index e51ca4d3cd..fced63ca2b 100644 --- a/config/examples/BQ/WITBOX/Configuration.h +++ b/config/examples/BQ/WITBOX/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/CTC/A13/Configuration.h b/config/examples/CTC/A13/Configuration.h index 7308be53f7..6a0f41bf78 100644 --- a/config/examples/CTC/A13/Configuration.h +++ b/config/examples/CTC/A13/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h b/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h index 988bc372b9..d3a7f11b0e 100644 --- a/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h +++ b/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Cartesio/Configuration.h b/config/examples/Cartesio/Configuration.h index 8e2747eadc..8ae2636185 100644 --- a/config/examples/Cartesio/Configuration.h +++ b/config/examples/Cartesio/Configuration.h @@ -372,8 +372,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Copymaster3D/300/Configuration.h b/config/examples/Copymaster3D/300/Configuration.h index 36ef42da1f..e71fca1537 100644 --- a/config/examples/Copymaster3D/300/Configuration.h +++ b/config/examples/Copymaster3D/300/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Copymaster3D/400/Configuration.h b/config/examples/Copymaster3D/400/Configuration.h index b08742efb0..1a4f35c691 100644 --- a/config/examples/Copymaster3D/400/Configuration.h +++ b/config/examples/Copymaster3D/400/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Copymaster3D/500/Configuration.h b/config/examples/Copymaster3D/500/Configuration.h index fd344cf253..d1de36d774 100644 --- a/config/examples/Copymaster3D/500/Configuration.h +++ b/config/examples/Copymaster3D/500/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration.h index 9afd494f98..3471e778fe 100644 --- a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -380,8 +380,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h index d389f798df..c12cb6817c 100644 --- a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h @@ -380,8 +380,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h index 2fbaa24089..9948e1db3e 100644 --- a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h +++ b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h index 3b0cce3fd1..4d192fc010 100644 --- a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration.h b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration.h index a330bae935..626cf039ff 100644 --- a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration.h +++ b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h index 495acd3c08..7d15b1d578 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration.h b/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration.h index 9b5be6e256..c3990b210c 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration.h +++ b/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Creality/CR-10 V2/Configuration.h b/config/examples/Creality/CR-10 V2/Configuration.h index 1f5fad0471..240d1baceb 100644 --- a/config/examples/Creality/CR-10 V2/Configuration.h +++ b/config/examples/Creality/CR-10 V2/Configuration.h @@ -378,8 +378,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Creality/CR-10 V3/Configuration.h b/config/examples/Creality/CR-10 V3/Configuration.h index 14448cabf5..28eaf1b20c 100644 --- a/config/examples/Creality/CR-10 V3/Configuration.h +++ b/config/examples/Creality/CR-10 V3/Configuration.h @@ -378,8 +378,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h index 9dd4d33c2b..2e5c27713b 100644 --- a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Creality/CR-10/CrealityV1/Configuration.h b/config/examples/Creality/CR-10/CrealityV1/Configuration.h index 51ada2e224..09fb8a9daa 100644 --- a/config/examples/Creality/CR-10/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10/CrealityV1/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h index d46fdec5dd..0733eb2d9f 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h index 4b04373acd..c9b086a46b 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration.h index b8436116af..33f1c560d4 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Creality/CR-10S/CrealityV1/Configuration.h b/config/examples/Creality/CR-10S/CrealityV1/Configuration.h index e84c3428cc..f6e63d0a37 100644 --- a/config/examples/Creality/CR-10S/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10S/CrealityV1/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Creality/CR-20 Pro/Configuration.h b/config/examples/Creality/CR-20 Pro/Configuration.h index 6ab0ba6e3f..38471f2b2a 100644 --- a/config/examples/Creality/CR-20 Pro/Configuration.h +++ b/config/examples/Creality/CR-20 Pro/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Creality/CR-20/Configuration.h b/config/examples/Creality/CR-20/Configuration.h index f1d398cd9a..5b4d6bdd6b 100644 --- a/config/examples/Creality/CR-20/Configuration.h +++ b/config/examples/Creality/CR-20/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Creality/CR-30 PrintMill/Configuration.h b/config/examples/Creality/CR-30 PrintMill/Configuration.h index 8e4aa583a5..a8fc027f1d 100644 --- a/config/examples/Creality/CR-30 PrintMill/Configuration.h +++ b/config/examples/Creality/CR-30 PrintMill/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Creality/CR-6 SE/Configuration.h b/config/examples/Creality/CR-6 SE/Configuration.h index a1278e134a..c26e83715e 100644 --- a/config/examples/Creality/CR-6 SE/Configuration.h +++ b/config/examples/Creality/CR-6 SE/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Creality/CR-8/Configuration.h b/config/examples/Creality/CR-8/Configuration.h index aca7c33bba..aadfe7da69 100644 --- a/config/examples/Creality/CR-8/Configuration.h +++ b/config/examples/Creality/CR-8/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration.h b/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration.h index 526f1b17a9..71bec5971e 100644 --- a/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration.h +++ b/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Creality/Ender-2/Configuration.h b/config/examples/Creality/Ender-2/Configuration.h index ee191c7889..ff26feb252 100644 --- a/config/examples/Creality/Ender-2/Configuration.h +++ b/config/examples/Creality/Ender-2/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Creality/Ender-3 Max/Configuration.h b/config/examples/Creality/Ender-3 Max/Configuration.h index b9cf107fb6..a367c04376 100644 --- a/config/examples/Creality/Ender-3 Max/Configuration.h +++ b/config/examples/Creality/Ender-3 Max/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration.h index 1386bce0bd..96ebf42ef5 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h index d8d8150ef7..ee5f8a434f 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h index 44f37a2743..91d0464b2b 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h index 47865cf1af..166261f3f2 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration.h index 94384527dd..f45d4bb2e1 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE HIGH // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h index 99eb567206..0e3fef6346 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h index b689141072..f65f82e7e7 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h index 22035b0c5c..e12f154b52 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration.h index 87b21794ca..f1d31c814f 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration.h index 464920cf90..c48ebe4ec0 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration.h b/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration.h index 4c539fa794..20d9dfd3af 100644 --- a/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration.h b/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration.h index b307600fc4..71ca6087cc 100644 --- a/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration.h index 11711c6b84..bba23900a0 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration.h index d2d9d7b39a..a66561cb2e 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h index d25b35163d..708c8d2886 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h index 8af5357252..0240ac85f6 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h index 237ed8c1f7..c819e1b383 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h index f5d7a3ccf0..ac38d8a758 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h index 9c0a8028d0..8663d068ed 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h index 211c28ccc6..866bc987e1 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h index 6eda17a291..ff9bc798d7 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration.h index b2668ef19d..5e2b355844 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE HIGH // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Creality/Ender-3/CrealityV1/Configuration.h b/config/examples/Creality/Ender-3/CrealityV1/Configuration.h index bffa16aa27..6ad59ff5c7 100644 --- a/config/examples/Creality/Ender-3/CrealityV1/Configuration.h +++ b/config/examples/Creality/Ender-3/CrealityV1/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Creality/Ender-3/CrealityV422/Configuration.h b/config/examples/Creality/Ender-3/CrealityV422/Configuration.h index f2c293a342..69debb72bc 100644 --- a/config/examples/Creality/Ender-3/CrealityV422/Configuration.h +++ b/config/examples/Creality/Ender-3/CrealityV422/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Creality/Ender-3/CrealityV427/Configuration.h b/config/examples/Creality/Ender-3/CrealityV427/Configuration.h index 51cef8f4e5..2a42dc65a8 100644 --- a/config/examples/Creality/Ender-3/CrealityV427/Configuration.h +++ b/config/examples/Creality/Ender-3/CrealityV427/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h index 81bf79aa89..777fe2387e 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h index 13b834ac50..66a5ba9d6e 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h index 96905f782c..9a5bcd94ad 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h index adcf595b22..711d1e6ef3 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h index c49e0de573..85f8fed979 100644 --- a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h +++ b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration.h b/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration.h index 1f68a39b30..80d8139625 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration.h b/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration.h index f161b4395d..529365510f 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration.h b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration.h index 604b8ee5a9..9e632050de 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration.h b/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration.h index 6d2d14771e..cc400e35d8 100644 --- a/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration.h +++ b/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Creality/Ender-4/Configuration.h b/config/examples/Creality/Ender-4/Configuration.h index d628a38b77..deffb796b0 100644 --- a/config/examples/Creality/Ender-4/Configuration.h +++ b/config/examples/Creality/Ender-4/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Creality/Ender-5 Plus/Configuration.h b/config/examples/Creality/Ender-5 Plus/Configuration.h index 85bc998a4c..eb67db8ffe 100644 --- a/config/examples/Creality/Ender-5 Plus/Configuration.h +++ b/config/examples/Creality/Ender-5 Plus/Configuration.h @@ -373,8 +373,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration.h index 2a244ad703..76326b2b7a 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration.h @@ -373,8 +373,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h index 20fc2f0e54..8f40cae088 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration.h index 030a036925..3474ac7410 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration.h b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration.h index 9a945f1ced..d8595b23a8 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration.h b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration.h index fbd4783b47..75fa9949df 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h index 59d52fd47d..15f36160de 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h index f0b21f1a77..66a443041c 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h @@ -381,8 +381,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h index 1e98b4c897..ec61d29d97 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration.h index 75a2f87d02..7c96fcea42 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration.h index 45227294ef..25a0691755 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h index bf02edb539..ae21fbdf93 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE HIGH // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Creality/Ender-5/CrealityV1/Configuration.h b/config/examples/Creality/Ender-5/CrealityV1/Configuration.h index 498e27b6b9..0745b193f2 100644 --- a/config/examples/Creality/Ender-5/CrealityV1/Configuration.h +++ b/config/examples/Creality/Ender-5/CrealityV1/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Creality/Ender-5/CrealityV427/Configuration.h b/config/examples/Creality/Ender-5/CrealityV427/Configuration.h index 6448bbb275..aa23976ca9 100644 --- a/config/examples/Creality/Ender-5/CrealityV427/Configuration.h +++ b/config/examples/Creality/Ender-5/CrealityV427/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Creality/Ender-6/Configuration.h b/config/examples/Creality/Ender-6/Configuration.h index d80174a2a6..6c60d06a28 100644 --- a/config/examples/Creality/Ender-6/Configuration.h +++ b/config/examples/Creality/Ender-6/Configuration.h @@ -374,8 +374,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration.h b/config/examples/Dagoma/Disco Ultimate/Configuration.h index 4ac3df5cfd..0b2cca6af1 100644 --- a/config/examples/Dagoma/Disco Ultimate/Configuration.h +++ b/config/examples/Dagoma/Disco Ultimate/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Daycom/3DP-100/Configuration.h b/config/examples/Daycom/3DP-100/Configuration.h index a2ccd6a1eb..8ba694c646 100644 --- a/config/examples/Daycom/3DP-100/Configuration.h +++ b/config/examples/Daycom/3DP-100/Configuration.h @@ -374,8 +374,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/EXP3D/Imprimante multifonction/Configuration.h b/config/examples/EXP3D/Imprimante multifonction/Configuration.h index 7fcbc4ceb5..ab7434c6e9 100644 --- a/config/examples/EXP3D/Imprimante multifonction/Configuration.h +++ b/config/examples/EXP3D/Imprimante multifonction/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/EasyThreeD/ET4000PLUS/Configuration.h b/config/examples/EasyThreeD/ET4000PLUS/Configuration.h index a39aa09b76..5e48ef9908 100644 --- a/config/examples/EasyThreeD/ET4000PLUS/Configuration.h +++ b/config/examples/EasyThreeD/ET4000PLUS/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Einstart-S/Configuration.h b/config/examples/Einstart-S/Configuration.h index 402d12ef62..d2ae5e0883 100644 --- a/config/examples/Einstart-S/Configuration.h +++ b/config/examples/Einstart-S/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Elegoo/Neptune 2/Configuration.h b/config/examples/Elegoo/Neptune 2/Configuration.h index 0803195bdd..80b2d1be98 100644 --- a/config/examples/Elegoo/Neptune 2/Configuration.h +++ b/config/examples/Elegoo/Neptune 2/Configuration.h @@ -440,8 +440,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Eryone/Thinker SE/Configuration.h b/config/examples/Eryone/Thinker SE/Configuration.h index 6c34eff854..d1013fbf48 100644 --- a/config/examples/Eryone/Thinker SE/Configuration.h +++ b/config/examples/Eryone/Thinker SE/Configuration.h @@ -379,8 +379,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Eryone/Thinker V2/Configuration.h b/config/examples/Eryone/Thinker V2/Configuration.h index 0225fbd589..143c7baa28 100644 --- a/config/examples/Eryone/Thinker V2/Configuration.h +++ b/config/examples/Eryone/Thinker V2/Configuration.h @@ -378,8 +378,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/FYSETC/AIO_II/Configuration.h b/config/examples/FYSETC/AIO_II/Configuration.h index 239ff6e3d4..01753e1aa4 100644 --- a/config/examples/FYSETC/AIO_II/Configuration.h +++ b/config/examples/FYSETC/AIO_II/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/FYSETC/F6_13/Configuration.h b/config/examples/FYSETC/F6_13/Configuration.h index e5ae83955e..6d85688b75 100644 --- a/config/examples/FYSETC/F6_13/Configuration.h +++ b/config/examples/FYSETC/F6_13/Configuration.h @@ -373,8 +373,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/FYSETC/S6/Configuration.h b/config/examples/FYSETC/S6/Configuration.h index 5798dd70d3..0d027c4a2c 100644 --- a/config/examples/FYSETC/S6/Configuration.h +++ b/config/examples/FYSETC/S6/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Felix/DUAL/Configuration.h b/config/examples/Felix/DUAL/Configuration.h index 95a4825be3..19c0075b0e 100644 --- a/config/examples/Felix/DUAL/Configuration.h +++ b/config/examples/Felix/DUAL/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - #define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + #define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Felix/Single/Configuration.h b/config/examples/Felix/Single/Configuration.h index 589ed0cc6a..4ea304b088 100644 --- a/config/examples/Felix/Single/Configuration.h +++ b/config/examples/Felix/Single/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - #define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + #define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/FlashForge/Creator 2X/Configuration.h b/config/examples/FlashForge/Creator 2X/Configuration.h index 06972cd3fd..9aa56a5425 100644 --- a/config/examples/FlashForge/Creator 2X/Configuration.h +++ b/config/examples/FlashForge/Creator 2X/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/FlashForge/CreatorPro/Configuration.h b/config/examples/FlashForge/CreatorPro/Configuration.h index b54c06b874..63b36a520e 100644 --- a/config/examples/FlashForge/CreatorPro/Configuration.h +++ b/config/examples/FlashForge/CreatorPro/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/FlyingBear/P902/Configuration.h b/config/examples/FlyingBear/P902/Configuration.h index e74c1a0caf..04efa262ce 100644 --- a/config/examples/FlyingBear/P902/Configuration.h +++ b/config/examples/FlyingBear/P902/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/FlyingBear/P905H/Configuration.h b/config/examples/FlyingBear/P905H/Configuration.h index a3d3182a98..f7fc823a5d 100644 --- a/config/examples/FlyingBear/P905H/Configuration.h +++ b/config/examples/FlyingBear/P905H/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/FoamCutter/Configuration.h b/config/examples/FoamCutter/Configuration.h index c2a7d7fb3f..7689ce66fa 100644 --- a/config/examples/FoamCutter/Configuration.h +++ b/config/examples/FoamCutter/Configuration.h @@ -370,8 +370,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/FolgerTech/i3-2020/Configuration.h b/config/examples/FolgerTech/i3-2020/Configuration.h index 03a3abe8f8..64e745a085 100644 --- a/config/examples/FolgerTech/i3-2020/Configuration.h +++ b/config/examples/FolgerTech/i3-2020/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Formbot/Raptor/Configuration.h b/config/examples/Formbot/Raptor/Configuration.h index 09f2d143b5..0dffa508bf 100644 --- a/config/examples/Formbot/Raptor/Configuration.h +++ b/config/examples/Formbot/Raptor/Configuration.h @@ -414,8 +414,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Formbot/T_Rex_2+/Configuration.h b/config/examples/Formbot/T_Rex_2+/Configuration.h index d3f079a5d4..3bd59c2215 100644 --- a/config/examples/Formbot/T_Rex_2+/Configuration.h +++ b/config/examples/Formbot/T_Rex_2+/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Formbot/T_Rex_3/Configuration.h b/config/examples/Formbot/T_Rex_3/Configuration.h index 9e1ae33958..1abc83a936 100644 --- a/config/examples/Formbot/T_Rex_3/Configuration.h +++ b/config/examples/Formbot/T_Rex_3/Configuration.h @@ -374,8 +374,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Geeetech/A10/Configuration.h b/config/examples/Geeetech/A10/Configuration.h index 42bf7ec4ce..8309a30847 100644 --- a/config/examples/Geeetech/A10/Configuration.h +++ b/config/examples/Geeetech/A10/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Geeetech/A10D/Configuration.h b/config/examples/Geeetech/A10D/Configuration.h index 1220408cdc..574a39e6fe 100644 --- a/config/examples/Geeetech/A10D/Configuration.h +++ b/config/examples/Geeetech/A10D/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Geeetech/A10M/Stock LCD/Configuration.h b/config/examples/Geeetech/A10M/Stock LCD/Configuration.h index 4b477a58e4..20b8c9d967 100644 --- a/config/examples/Geeetech/A10M/Stock LCD/Configuration.h +++ b/config/examples/Geeetech/A10M/Stock LCD/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration.h b/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration.h index 03917d0b00..75134345b5 100644 --- a/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration.h +++ b/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Geeetech/A10PRO/Configuration.h b/config/examples/Geeetech/A10PRO/Configuration.h index d1d5084b7f..fbeec755ee 100644 --- a/config/examples/Geeetech/A10PRO/Configuration.h +++ b/config/examples/Geeetech/A10PRO/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Geeetech/A10T/Stock LCD/Configuration.h b/config/examples/Geeetech/A10T/Stock LCD/Configuration.h index fe37e94018..b17b01ff44 100644 --- a/config/examples/Geeetech/A10T/Stock LCD/Configuration.h +++ b/config/examples/Geeetech/A10T/Stock LCD/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration.h b/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration.h index dc2f15379b..f8085f0535 100644 --- a/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration.h +++ b/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Geeetech/A20/Configuration.h b/config/examples/Geeetech/A20/Configuration.h index bd27b6c50d..133306a24a 100644 --- a/config/examples/Geeetech/A20/Configuration.h +++ b/config/examples/Geeetech/A20/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Geeetech/A20M/Configuration.h b/config/examples/Geeetech/A20M/Configuration.h index e708174e7c..966027723a 100644 --- a/config/examples/Geeetech/A20M/Configuration.h +++ b/config/examples/Geeetech/A20M/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Geeetech/A20T/Configuration.h b/config/examples/Geeetech/A20T/Configuration.h index 128935bc79..595f8d4209 100644 --- a/config/examples/Geeetech/A20T/Configuration.h +++ b/config/examples/Geeetech/A20T/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Geeetech/A30/Configuration.h b/config/examples/Geeetech/A30/Configuration.h index aa2a50331e..1ba69607f2 100644 --- a/config/examples/Geeetech/A30/Configuration.h +++ b/config/examples/Geeetech/A30/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Geeetech/A30M/Configuration.h b/config/examples/Geeetech/A30M/Configuration.h index 84638ca23c..6bc4cddd11 100644 --- a/config/examples/Geeetech/A30M/Configuration.h +++ b/config/examples/Geeetech/A30M/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Geeetech/A30T/Configuration.h b/config/examples/Geeetech/A30T/Configuration.h index 74055ee967..71101eb141 100644 --- a/config/examples/Geeetech/A30T/Configuration.h +++ b/config/examples/Geeetech/A30T/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Geeetech/D200/Configuration.h b/config/examples/Geeetech/D200/Configuration.h index 0a129d2ece..6a4bc78cd0 100644 --- a/config/examples/Geeetech/D200/Configuration.h +++ b/config/examples/Geeetech/D200/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Geeetech/Duplicator5/Configuration.h b/config/examples/Geeetech/Duplicator5/Configuration.h index d50c71fd6f..84405d3e84 100644 --- a/config/examples/Geeetech/Duplicator5/Configuration.h +++ b/config/examples/Geeetech/Duplicator5/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Geeetech/E180/Configuration.h b/config/examples/Geeetech/E180/Configuration.h index 4101b1f887..408b8e66b1 100644 --- a/config/examples/Geeetech/E180/Configuration.h +++ b/config/examples/Geeetech/E180/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Geeetech/GT2560/Configuration.h b/config/examples/Geeetech/GT2560/Configuration.h index 0a70d6e1b1..ab6851a728 100644 --- a/config/examples/Geeetech/GT2560/Configuration.h +++ b/config/examples/Geeetech/GT2560/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h index b3c65d5c04..6f4c1d373a 100644 --- a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h +++ b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Geeetech/M201/Configuration.h b/config/examples/Geeetech/M201/Configuration.h index 893ea3e710..a9cb2401c3 100644 --- a/config/examples/Geeetech/M201/Configuration.h +++ b/config/examples/Geeetech/M201/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Geeetech/MeCreator2/Configuration.h b/config/examples/Geeetech/MeCreator2/Configuration.h index 8b75962169..18861415e5 100644 --- a/config/examples/Geeetech/MeCreator2/Configuration.h +++ b/config/examples/Geeetech/MeCreator2/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Geeetech/Me_creator/Configuration.h b/config/examples/Geeetech/Me_creator/Configuration.h index 197c5fbb8d..02417be33b 100644 --- a/config/examples/Geeetech/Me_creator/Configuration.h +++ b/config/examples/Geeetech/Me_creator/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Geeetech/Me_ducer/Configuration.h b/config/examples/Geeetech/Me_ducer/Configuration.h index b4ce475331..9049ba684e 100644 --- a/config/examples/Geeetech/Me_ducer/Configuration.h +++ b/config/examples/Geeetech/Me_ducer/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Geeetech/PI3A PRO/Configuration.h b/config/examples/Geeetech/PI3A PRO/Configuration.h index bde83e2a5e..dbb48b5906 100644 --- a/config/examples/Geeetech/PI3A PRO/Configuration.h +++ b/config/examples/Geeetech/PI3A PRO/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h index 3c8958072e..a1560bb970 100644 --- a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h index 971e65ed00..3915285f98 100644 --- a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h index 2bd6effe05..9cd2164ade 100644 --- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h index 5fbc9e5879..74cd793f90 100644 --- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/HMS434/Configuration.h b/config/examples/HMS434/Configuration.h index 79a2512980..72c5bc09e6 100644 --- a/config/examples/HMS434/Configuration.h +++ b/config/examples/HMS434/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Index/REV_03/Configuration.h b/config/examples/Index/REV_03/Configuration.h index 7aae94163f..a4c35dfffd 100644 --- a/config/examples/Index/REV_03/Configuration.h +++ b/config/examples/Index/REV_03/Configuration.h @@ -376,8 +376,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Infitary/i3-M508/Configuration.h b/config/examples/Infitary/i3-M508/Configuration.h index 6b2f5bfcf0..0c85688b81 100644 --- a/config/examples/Infitary/i3-M508/Configuration.h +++ b/config/examples/Infitary/i3-M508/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Intamsys/FunmatHT 4988/Configuration.h b/config/examples/Intamsys/FunmatHT 4988/Configuration.h index 1100a4d393..7b43a533f8 100644 --- a/config/examples/Intamsys/FunmatHT 4988/Configuration.h +++ b/config/examples/Intamsys/FunmatHT 4988/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE HIGH // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - #define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + #define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/JGAurora/A1/Configuration.h b/config/examples/JGAurora/A1/Configuration.h index d995017388..37cc92305d 100644 --- a/config/examples/JGAurora/A1/Configuration.h +++ b/config/examples/JGAurora/A1/Configuration.h @@ -372,8 +372,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/JGAurora/A3/Configuration.h b/config/examples/JGAurora/A3/Configuration.h index 2a2d5151d8..d600c67e72 100644 --- a/config/examples/JGAurora/A3/Configuration.h +++ b/config/examples/JGAurora/A3/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/JGAurora/A5/Configuration.h b/config/examples/JGAurora/A5/Configuration.h index b794015fed..8c434ea489 100644 --- a/config/examples/JGAurora/A5/Configuration.h +++ b/config/examples/JGAurora/A5/Configuration.h @@ -376,8 +376,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/JGAurora/A5S/Configuration.h b/config/examples/JGAurora/A5S/Configuration.h index 03308064be..3c80e48847 100644 --- a/config/examples/JGAurora/A5S/Configuration.h +++ b/config/examples/JGAurora/A5S/Configuration.h @@ -372,8 +372,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/JGAurora/Magic/Configuration.h b/config/examples/JGAurora/Magic/Configuration.h index 2a0470ab80..6e6075d85d 100644 --- a/config/examples/JGAurora/Magic/Configuration.h +++ b/config/examples/JGAurora/Magic/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Kingroon/KP3/Configuration.h b/config/examples/Kingroon/KP3/Configuration.h index 92391da7ec..af904fe010 100644 --- a/config/examples/Kingroon/KP3/Configuration.h +++ b/config/examples/Kingroon/KP3/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Kingroon/KP3S/Configuration.h b/config/examples/Kingroon/KP3S/Configuration.h index 46c8b79a50..464bb32e69 100644 --- a/config/examples/Kingroon/KP3S/Configuration.h +++ b/config/examples/Kingroon/KP3S/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Labists/ET4/Configuration.h b/config/examples/Labists/ET4/Configuration.h index f849f5cc79..849744b323 100644 --- a/config/examples/Labists/ET4/Configuration.h +++ b/config/examples/Labists/ET4/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/LulzBot/TAZ4/Configuration.h b/config/examples/LulzBot/TAZ4/Configuration.h index a85a132e84..7d9139a422 100644 --- a/config/examples/LulzBot/TAZ4/Configuration.h +++ b/config/examples/LulzBot/TAZ4/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/MBot/Cube/Configuration.h b/config/examples/MBot/Cube/Configuration.h index d098b7b686..4106955aef 100644 --- a/config/examples/MBot/Cube/Configuration.h +++ b/config/examples/MBot/Cube/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/MakerFarm/Pegasus 12/Configuration.h b/config/examples/MakerFarm/Pegasus 12/Configuration.h index 89ef06a5a4..0837e53313 100644 --- a/config/examples/MakerFarm/Pegasus 12/Configuration.h +++ b/config/examples/MakerFarm/Pegasus 12/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/MakerParts/Configuration.h b/config/examples/MakerParts/Configuration.h index c20bf6b807..96621aaccd 100644 --- a/config/examples/MakerParts/Configuration.h +++ b/config/examples/MakerParts/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Malyan/M150/Configuration.h b/config/examples/Malyan/M150/Configuration.h index 7a06bad526..876de65f26 100644 --- a/config/examples/Malyan/M150/Configuration.h +++ b/config/examples/Malyan/M150/Configuration.h @@ -376,8 +376,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Malyan/M180/Configuration.h b/config/examples/Malyan/M180/Configuration.h index ae1fec14a2..19fce6d2a7 100644 --- a/config/examples/Malyan/M180/Configuration.h +++ b/config/examples/Malyan/M180/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Malyan/M200/Configuration.h b/config/examples/Malyan/M200/Configuration.h index 7e31d48929..7274c31fec 100644 --- a/config/examples/Malyan/M200/Configuration.h +++ b/config/examples/Malyan/M200/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Micromake/C1/basic/Configuration.h b/config/examples/Micromake/C1/basic/Configuration.h index 2815d0dafa..058b8b59e9 100644 --- a/config/examples/Micromake/C1/basic/Configuration.h +++ b/config/examples/Micromake/C1/basic/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Micromake/C1/enhanced/Configuration.h b/config/examples/Micromake/C1/enhanced/Configuration.h index e9eb5bfe1f..3e6f898d70 100644 --- a/config/examples/Micromake/C1/enhanced/Configuration.h +++ b/config/examples/Micromake/C1/enhanced/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Mks/Robin/Configuration.h b/config/examples/Mks/Robin/Configuration.h index 441376c9b3..98232e1042 100644 --- a/config/examples/Mks/Robin/Configuration.h +++ b/config/examples/Mks/Robin/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Mks/Robin_Lite3/Configuration.h b/config/examples/Mks/Robin_Lite3/Configuration.h index 119e4c0d16..8050ee65ab 100644 --- a/config/examples/Mks/Robin_Lite3/Configuration.h +++ b/config/examples/Mks/Robin_Lite3/Configuration.h @@ -377,8 +377,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Mks/Robin_Pro/Configuration.h b/config/examples/Mks/Robin_Pro/Configuration.h index 19dcdb307a..0a49dd1563 100644 --- a/config/examples/Mks/Robin_Pro/Configuration.h +++ b/config/examples/Mks/Robin_Pro/Configuration.h @@ -373,8 +373,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Mks/Sbase/Configuration.h b/config/examples/Mks/Sbase/Configuration.h index 34937a7db4..59413b4551 100644 --- a/config/examples/Mks/Sbase/Configuration.h +++ b/config/examples/Mks/Sbase/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - #define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + #define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Modix/Big60/Configuration.h b/config/examples/Modix/Big60/Configuration.h index dd51523129..73ab241481 100644 --- a/config/examples/Modix/Big60/Configuration.h +++ b/config/examples/Modix/Big60/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Nextion/Configuration.h b/config/examples/Nextion/Configuration.h index 411e7c1a19..a61b146014 100644 --- a/config/examples/Nextion/Configuration.h +++ b/config/examples/Nextion/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Ortur 4/Configuration.h b/config/examples/Ortur 4/Configuration.h index 13dcc89e78..3b647bd660 100644 --- a/config/examples/Ortur 4/Configuration.h +++ b/config/examples/Ortur 4/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Polargraph/Configuration.h b/config/examples/Polargraph/Configuration.h index 5a4077dc3f..7963dd3d6e 100644 --- a/config/examples/Polargraph/Configuration.h +++ b/config/examples/Polargraph/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Printrbot/PrintrboardG2/Configuration.h b/config/examples/Printrbot/PrintrboardG2/Configuration.h index ac887532ce..1d6bce69bf 100644 --- a/config/examples/Printrbot/PrintrboardG2/Configuration.h +++ b/config/examples/Printrbot/PrintrboardG2/Configuration.h @@ -372,8 +372,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Printrbot/Simple Metal RevD/Configuration.h b/config/examples/Printrbot/Simple Metal RevD/Configuration.h index 3b15bdf96e..ba9ed5cede 100644 --- a/config/examples/Printrbot/Simple Metal RevD/Configuration.h +++ b/config/examples/Printrbot/Simple Metal RevD/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Prusa/MK3/Configuration.h b/config/examples/Prusa/MK3/Configuration.h index d04e20829a..ac22c50d3f 100644 --- a/config/examples/Prusa/MK3/Configuration.h +++ b/config/examples/Prusa/MK3/Configuration.h @@ -390,8 +390,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h index d2b6fc4d7c..c758d5ef7e 100644 --- a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h +++ b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h @@ -383,8 +383,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Qidi/Qidi 1/Configuration.h b/config/examples/Qidi/Qidi 1/Configuration.h index e35558ac45..acd409ef72 100644 --- a/config/examples/Qidi/Qidi 1/Configuration.h +++ b/config/examples/Qidi/Qidi 1/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Raiscube/A8r/Configuration.h b/config/examples/Raiscube/A8r/Configuration.h index f144a22e6a..0ef4c68d37 100644 --- a/config/examples/Raiscube/A8r/Configuration.h +++ b/config/examples/Raiscube/A8r/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/RapideLite/RL200/Configuration.h b/config/examples/RapideLite/RL200/Configuration.h index d4a83d72bf..e2aed13e57 100644 --- a/config/examples/RapideLite/RL200/Configuration.h +++ b/config/examples/RapideLite/RL200/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Renkforce/RF100/Configuration.h b/config/examples/Renkforce/RF100/Configuration.h index 6a27cf6cb0..e77ed1b9a2 100644 --- a/config/examples/Renkforce/RF100/Configuration.h +++ b/config/examples/Renkforce/RF100/Configuration.h @@ -375,8 +375,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Renkforce/RF100XL/Configuration.h b/config/examples/Renkforce/RF100XL/Configuration.h index eea851f8a1..506505295f 100644 --- a/config/examples/Renkforce/RF100XL/Configuration.h +++ b/config/examples/Renkforce/RF100XL/Configuration.h @@ -375,8 +375,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Renkforce/RF100v2/Configuration.h b/config/examples/Renkforce/RF100v2/Configuration.h index c68b3df605..244e6d3c2c 100644 --- a/config/examples/Renkforce/RF100v2/Configuration.h +++ b/config/examples/Renkforce/RF100v2/Configuration.h @@ -375,8 +375,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/RepRapPro/Huxley/Configuration.h b/config/examples/RepRapPro/Huxley/Configuration.h index 2a8f38ab14..3d44d6c0ad 100644 --- a/config/examples/RepRapPro/Huxley/Configuration.h +++ b/config/examples/RepRapPro/Huxley/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/RepRapWorld/Megatronics/Configuration.h b/config/examples/RepRapWorld/Megatronics/Configuration.h index 5631a82609..c47ce015b2 100644 --- a/config/examples/RepRapWorld/Megatronics/Configuration.h +++ b/config/examples/RepRapWorld/Megatronics/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/RigidBot/Configuration.h b/config/examples/RigidBot/Configuration.h index 2237d0852a..d3e5929aee 100644 --- a/config/examples/RigidBot/Configuration.h +++ b/config/examples/RigidBot/Configuration.h @@ -373,8 +373,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Robo3D/R1+/Configuration.h b/config/examples/Robo3D/R1+/Configuration.h index e0aacc2b9f..b969b0c357 100644 --- a/config/examples/Robo3D/R1+/Configuration.h +++ b/config/examples/Robo3D/R1+/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/SCARA/MP_SCARA/Configuration.h b/config/examples/SCARA/MP_SCARA/Configuration.h index 49534c8156..89eb0c3df6 100644 --- a/config/examples/SCARA/MP_SCARA/Configuration.h +++ b/config/examples/SCARA/MP_SCARA/Configuration.h @@ -416,8 +416,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/SCARA/Morgan/Configuration.h b/config/examples/SCARA/Morgan/Configuration.h index 2b36ef974f..4f70bd95ad 100644 --- a/config/examples/SCARA/Morgan/Configuration.h +++ b/config/examples/SCARA/Morgan/Configuration.h @@ -416,8 +416,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration.h b/config/examples/STM32/Black_STM32F407VET6/Configuration.h index 7d824c94cd..f7076d9344 100644 --- a/config/examples/STM32/Black_STM32F407VET6/Configuration.h +++ b/config/examples/STM32/Black_STM32F407VET6/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/STM32/STM32F103RE/Configuration.h b/config/examples/STM32/STM32F103RE/Configuration.h index 52d24d9745..91648019e1 100644 --- a/config/examples/STM32/STM32F103RE/Configuration.h +++ b/config/examples/STM32/STM32F103RE/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/STM32/STM32F4/Configuration.h b/config/examples/STM32/STM32F4/Configuration.h index 23eec93363..d039756488 100644 --- a/config/examples/STM32/STM32F4/Configuration.h +++ b/config/examples/STM32/STM32F4/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Sanguinololu/Configuration.h b/config/examples/Sanguinololu/Configuration.h index 0c6998ef26..8df5e30176 100644 --- a/config/examples/Sanguinololu/Configuration.h +++ b/config/examples/Sanguinololu/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Simulator/Configuration.h b/config/examples/Simulator/Configuration.h index 81e94ebb6f..9b047636f5 100644 --- a/config/examples/Simulator/Configuration.h +++ b/config/examples/Simulator/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration.h b/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration.h index a123803835..6b220652fc 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration.h @@ -373,8 +373,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration.h index e9bbfc427e..88858df598 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Sovol/SV-01/CrealityV22/Configuration.h b/config/examples/Sovol/SV-01/CrealityV22/Configuration.h index c48e7af280..5df60712c0 100644 --- a/config/examples/Sovol/SV-01/CrealityV22/Configuration.h +++ b/config/examples/Sovol/SV-01/CrealityV22/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Sovol/SV-01/CrealityV221/Configuration.h b/config/examples/Sovol/SV-01/CrealityV221/Configuration.h index 66a9f1d631..a5b02f774a 100644 --- a/config/examples/Sovol/SV-01/CrealityV221/Configuration.h +++ b/config/examples/Sovol/SV-01/CrealityV221/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Sunlu/S8/Configuration.h b/config/examples/Sunlu/S8/Configuration.h index 481beb0ff3..07a346b769 100644 --- a/config/examples/Sunlu/S8/Configuration.h +++ b/config/examples/Sunlu/S8/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/TPARA/AXEL_TPARA/Configuration.h b/config/examples/TPARA/AXEL_TPARA/Configuration.h index 795f04bd67..fbba387db6 100644 --- a/config/examples/TPARA/AXEL_TPARA/Configuration.h +++ b/config/examples/TPARA/AXEL_TPARA/Configuration.h @@ -391,8 +391,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Tevo/Michelangelo/Configuration.h b/config/examples/Tevo/Michelangelo/Configuration.h index 6e2246452a..2fe7bcfb9b 100644 --- a/config/examples/Tevo/Michelangelo/Configuration.h +++ b/config/examples/Tevo/Michelangelo/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Tevo/Nereus/Configuration.h b/config/examples/Tevo/Nereus/Configuration.h index 8ed03882bd..44ef2d008f 100644 --- a/config/examples/Tevo/Nereus/Configuration.h +++ b/config/examples/Tevo/Nereus/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Tevo/Tarantula Pro/Configuration.h b/config/examples/Tevo/Tarantula Pro/Configuration.h index e42b90cc23..9f1682ce4c 100644 --- a/config/examples/Tevo/Tarantula Pro/Configuration.h +++ b/config/examples/Tevo/Tarantula Pro/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h index 8a7c7ad3a8..a645d0c162 100644 --- a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h +++ b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h index d843c14e7e..5427c20b7e 100644 --- a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h +++ b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/TheBorg/Configuration.h b/config/examples/TheBorg/Configuration.h index ab8189f091..4a16a0b16a 100644 --- a/config/examples/TheBorg/Configuration.h +++ b/config/examples/TheBorg/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/TinyBoy2/Configuration.h b/config/examples/TinyBoy2/Configuration.h index 41d988a16e..62460b3c25 100644 --- a/config/examples/TinyBoy2/Configuration.h +++ b/config/examples/TinyBoy2/Configuration.h @@ -393,8 +393,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Tronxy/X1/Configuration.h b/config/examples/Tronxy/X1/Configuration.h index 15a3b5d47c..21d9acbb8d 100644 --- a/config/examples/Tronxy/X1/Configuration.h +++ b/config/examples/Tronxy/X1/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Tronxy/X3A/Configuration.h b/config/examples/Tronxy/X3A/Configuration.h index 643d751462..0e8b15b1f8 100644 --- a/config/examples/Tronxy/X3A/Configuration.h +++ b/config/examples/Tronxy/X3A/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Tronxy/X5S-2E/Configuration.h b/config/examples/Tronxy/X5S-2E/Configuration.h index bc9ee361b7..1f1e8738d0 100644 --- a/config/examples/Tronxy/X5S-2E/Configuration.h +++ b/config/examples/Tronxy/X5S-2E/Configuration.h @@ -373,8 +373,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Tronxy/X5S/Configuration.h b/config/examples/Tronxy/X5S/Configuration.h index 18c01001a1..456d075658 100644 --- a/config/examples/Tronxy/X5S/Configuration.h +++ b/config/examples/Tronxy/X5S/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Tronxy/X5SA-2E/Configuration.h b/config/examples/Tronxy/X5SA-2E/Configuration.h index fd3bdac0f3..f70d052fe6 100644 --- a/config/examples/Tronxy/X5SA-2E/Configuration.h +++ b/config/examples/Tronxy/X5SA-2E/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Tronxy/X5SA/Configuration.h b/config/examples/Tronxy/X5SA/Configuration.h index 3990c0f15f..ba1f916ed7 100644 --- a/config/examples/Tronxy/X5SA/Configuration.h +++ b/config/examples/Tronxy/X5SA/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Tronxy/XY100/Configuration.h b/config/examples/Tronxy/XY100/Configuration.h index cb34029442..7fde8d1480 100644 --- a/config/examples/Tronxy/XY100/Configuration.h +++ b/config/examples/Tronxy/XY100/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Two Trees/BlueR Plus/Configuration.h b/config/examples/Two Trees/BlueR Plus/Configuration.h index 3ddd02fd24..a4645cc923 100644 --- a/config/examples/Two Trees/BlueR Plus/Configuration.h +++ b/config/examples/Two Trees/BlueR Plus/Configuration.h @@ -372,8 +372,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Two Trees/BlueR/BlueR V1/Configuration.h b/config/examples/Two Trees/BlueR/BlueR V1/Configuration.h index cba4737c7c..08edc9fe83 100644 --- a/config/examples/Two Trees/BlueR/BlueR V1/Configuration.h +++ b/config/examples/Two Trees/BlueR/BlueR V1/Configuration.h @@ -374,8 +374,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Two Trees/BlueR/BlueR V2/Configuration.h b/config/examples/Two Trees/BlueR/BlueR V2/Configuration.h index 76a794f7b1..dc1e003e8f 100644 --- a/config/examples/Two Trees/BlueR/BlueR V2/Configuration.h +++ b/config/examples/Two Trees/BlueR/BlueR V2/Configuration.h @@ -375,8 +375,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Two Trees/BlueR/BlueR V3/Configuration.h b/config/examples/Two Trees/BlueR/BlueR V3/Configuration.h index 071f829505..67533db17f 100644 --- a/config/examples/Two Trees/BlueR/BlueR V3/Configuration.h +++ b/config/examples/Two Trees/BlueR/BlueR V3/Configuration.h @@ -374,8 +374,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration.h b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration.h index 33bd92f6e5..fe3647fb73 100644 --- a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration.h +++ b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration.h @@ -377,8 +377,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Two Trees/Sapphire Pro/Configuration.h b/config/examples/Two Trees/Sapphire Pro/Configuration.h index f9c6adca3a..a4d059f246 100644 --- a/config/examples/Two Trees/Sapphire Pro/Configuration.h +++ b/config/examples/Two Trees/Sapphire Pro/Configuration.h @@ -375,8 +375,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/UltiMachine/Archim1/Configuration.h b/config/examples/UltiMachine/Archim1/Configuration.h index a6c01233ef..22e8355210 100644 --- a/config/examples/UltiMachine/Archim1/Configuration.h +++ b/config/examples/UltiMachine/Archim1/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/UltiMachine/Archim2/Configuration.h b/config/examples/UltiMachine/Archim2/Configuration.h index c12f84d09c..b1fd26caad 100644 --- a/config/examples/UltiMachine/Archim2/Configuration.h +++ b/config/examples/UltiMachine/Archim2/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Ultimaker/Ultimaker 2/Configuration.h b/config/examples/Ultimaker/Ultimaker 2/Configuration.h index daea08ea68..d935fc3ba3 100644 --- a/config/examples/Ultimaker/Ultimaker 2/Configuration.h +++ b/config/examples/Ultimaker/Ultimaker 2/Configuration.h @@ -374,8 +374,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration.h b/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration.h index ca7324b76a..c924048db8 100644 --- a/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration.h +++ b/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration.h b/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration.h index 6e3ebbfcf2..bab208c884 100644 --- a/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration.h +++ b/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/VORONDesign/Configuration.h b/config/examples/VORONDesign/Configuration.h index 5d6c6c0078..8ec60f28ae 100644 --- a/config/examples/VORONDesign/Configuration.h +++ b/config/examples/VORONDesign/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Velleman/K8200/Configuration.h b/config/examples/Velleman/K8200/Configuration.h index aec6a743bc..ed632bb44f 100644 --- a/config/examples/Velleman/K8200/Configuration.h +++ b/config/examples/Velleman/K8200/Configuration.h @@ -391,8 +391,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Velleman/K8400/Dual-head/Configuration.h b/config/examples/Velleman/K8400/Dual-head/Configuration.h index b99d5a05cc..fa34912393 100644 --- a/config/examples/Velleman/K8400/Dual-head/Configuration.h +++ b/config/examples/Velleman/K8400/Dual-head/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Velleman/K8400/Single-head/Configuration.h b/config/examples/Velleman/K8400/Single-head/Configuration.h index 727ce36674..a2f24f0dba 100644 --- a/config/examples/Velleman/K8400/Single-head/Configuration.h +++ b/config/examples/Velleman/K8400/Single-head/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/WASP/PowerWASP/Configuration.h b/config/examples/WASP/PowerWASP/Configuration.h index f084720910..171e94bc96 100644 --- a/config/examples/WASP/PowerWASP/Configuration.h +++ b/config/examples/WASP/PowerWASP/Configuration.h @@ -384,8 +384,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Wanhao/Duplicator 4S/Configuration.h b/config/examples/Wanhao/Duplicator 4S/Configuration.h index c9e6e22430..9b8d66f6e5 100644 --- a/config/examples/Wanhao/Duplicator 4S/Configuration.h +++ b/config/examples/Wanhao/Duplicator 4S/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Wanhao/Duplicator 6/Configuration.h b/config/examples/Wanhao/Duplicator 6/Configuration.h index 57782e4b19..96a4fba48a 100644 --- a/config/examples/Wanhao/Duplicator 6/Configuration.h +++ b/config/examples/Wanhao/Duplicator 6/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h b/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h index 7464898408..a91f8b9e4f 100644 --- a/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h +++ b/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h index 3e1fcb1806..09823b61a5 100644 --- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h +++ b/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Wanhao/Duplicator i3 Plus/Configuration.h b/config/examples/Wanhao/Duplicator i3 Plus/Configuration.h index 2cd8087669..d2a4e39d0d 100644 --- a/config/examples/Wanhao/Duplicator i3 Plus/Configuration.h +++ b/config/examples/Wanhao/Duplicator i3 Plus/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Weistek/wt150/Configuration.h b/config/examples/Weistek/wt150/Configuration.h index 0598e4831d..91a8dfa298 100644 --- a/config/examples/Weistek/wt150/Configuration.h +++ b/config/examples/Weistek/wt150/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Zonestar/P802M/Configuration.h b/config/examples/Zonestar/P802M/Configuration.h index 237188803e..257e1ebacc 100644 --- a/config/examples/Zonestar/P802M/Configuration.h +++ b/config/examples/Zonestar/P802M/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h index 4a9042367a..e94cea8fea 100644 --- a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h +++ b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h @@ -373,8 +373,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h index 22d3cccc66..c6f237e48f 100644 --- a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h +++ b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h @@ -374,8 +374,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/delta/Anycubic/Kossel/Configuration.h b/config/examples/delta/Anycubic/Kossel/Configuration.h index 81761bdb49..b5bbfaef8b 100644 --- a/config/examples/delta/Anycubic/Kossel/Configuration.h +++ b/config/examples/delta/Anycubic/Kossel/Configuration.h @@ -377,8 +377,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/delta/Anycubic/Predator/Configuration.h b/config/examples/delta/Anycubic/Predator/Configuration.h index 91d939996a..2bc0baa427 100644 --- a/config/examples/delta/Anycubic/Predator/Configuration.h +++ b/config/examples/delta/Anycubic/Predator/Configuration.h @@ -362,8 +362,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/delta/Dreammaker/Overlord/Configuration.h b/config/examples/delta/Dreammaker/Overlord/Configuration.h index dd6e27f7ec..42ed44571a 100644 --- a/config/examples/delta/Dreammaker/Overlord/Configuration.h +++ b/config/examples/delta/Dreammaker/Overlord/Configuration.h @@ -362,8 +362,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE HIGH // Set 'LOW' for ATX, 'HIGH' for X-Box - #define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + #define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h index bc90ec3748..b77d443d04 100644 --- a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h +++ b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h @@ -362,8 +362,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE HIGH // Set 'LOW' for ATX, 'HIGH' for X-Box - #define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + #define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h index 6e37509c87..0ee98c1bee 100644 --- a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h +++ b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h @@ -362,8 +362,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h b/config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h index 9afb324922..4add1b9106 100644 --- a/config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h +++ b/config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h @@ -362,8 +362,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/delta/FLSUN/QQ-S/Configuration.h b/config/examples/delta/FLSUN/QQ-S/Configuration.h index 23d8b01e45..27fb5c45bf 100644 --- a/config/examples/delta/FLSUN/QQ-S/Configuration.h +++ b/config/examples/delta/FLSUN/QQ-S/Configuration.h @@ -362,8 +362,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/delta/FLSUN/QQS-Pro/Configuration.h b/config/examples/delta/FLSUN/QQS-Pro/Configuration.h index 3c1e383ba8..167d669f4a 100644 --- a/config/examples/delta/FLSUN/QQS-Pro/Configuration.h +++ b/config/examples/delta/FLSUN/QQS-Pro/Configuration.h @@ -362,8 +362,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration.h index e3dc1f71ed..004228e55e 100644 --- a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h +++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration.h @@ -362,8 +362,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/delta/FLSUN/kossel/Configuration.h b/config/examples/delta/FLSUN/kossel/Configuration.h index acff1f4645..3407145528 100644 --- a/config/examples/delta/FLSUN/kossel/Configuration.h +++ b/config/examples/delta/FLSUN/kossel/Configuration.h @@ -362,8 +362,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration.h b/config/examples/delta/FLSUN/kossel_mini/Configuration.h index 5ca8f7c2c3..afaa9a7dfe 100644 --- a/config/examples/delta/FLSUN/kossel_mini/Configuration.h +++ b/config/examples/delta/FLSUN/kossel_mini/Configuration.h @@ -362,8 +362,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/delta/Geeetech/G2/Configuration.h b/config/examples/delta/Geeetech/G2/Configuration.h index 873da58065..7aa271a63e 100644 --- a/config/examples/delta/Geeetech/G2/Configuration.h +++ b/config/examples/delta/Geeetech/G2/Configuration.h @@ -362,8 +362,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/delta/Geeetech/G2Pro/Configuration.h b/config/examples/delta/Geeetech/G2Pro/Configuration.h index e97220b594..fefb135530 100644 --- a/config/examples/delta/Geeetech/G2Pro/Configuration.h +++ b/config/examples/delta/Geeetech/G2Pro/Configuration.h @@ -362,8 +362,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/delta/Geeetech/G2S/Configuration.h b/config/examples/delta/Geeetech/G2S/Configuration.h index bad2650571..9d544f034c 100644 --- a/config/examples/delta/Geeetech/G2S/Configuration.h +++ b/config/examples/delta/Geeetech/G2S/Configuration.h @@ -362,8 +362,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/delta/Geeetech/G2SPro/Configuration.h b/config/examples/delta/Geeetech/G2SPro/Configuration.h index 6cd614418b..2a5f4ff355 100644 --- a/config/examples/delta/Geeetech/G2SPro/Configuration.h +++ b/config/examples/delta/Geeetech/G2SPro/Configuration.h @@ -362,8 +362,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration.h b/config/examples/delta/Geeetech/Rostock 301/Configuration.h index 8854465df4..cb0a29a4b8 100644 --- a/config/examples/delta/Geeetech/Rostock 301/Configuration.h +++ b/config/examples/delta/Geeetech/Rostock 301/Configuration.h @@ -362,8 +362,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/delta/Hatchbox_Alpha/Configuration.h b/config/examples/delta/Hatchbox_Alpha/Configuration.h index 40ea8904cb..78ba462a11 100644 --- a/config/examples/delta/Hatchbox_Alpha/Configuration.h +++ b/config/examples/delta/Hatchbox_Alpha/Configuration.h @@ -367,8 +367,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/delta/MKS/SBASE/Configuration.h b/config/examples/delta/MKS/SBASE/Configuration.h index 87a3ce3d5f..63c7806bf5 100644 --- a/config/examples/delta/MKS/SBASE/Configuration.h +++ b/config/examples/delta/MKS/SBASE/Configuration.h @@ -362,8 +362,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - #define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + #define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/delta/Malyan M300/Configuration.h b/config/examples/delta/Malyan M300/Configuration.h index e0b44c46b8..3188c3df40 100644 --- a/config/examples/delta/Malyan M300/Configuration.h +++ b/config/examples/delta/Malyan M300/Configuration.h @@ -362,8 +362,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/delta/Tevo Little Monster/Configuration.h b/config/examples/delta/Tevo Little Monster/Configuration.h index e73d290861..d94067d385 100644 --- a/config/examples/delta/Tevo Little Monster/Configuration.h +++ b/config/examples/delta/Tevo Little Monster/Configuration.h @@ -362,8 +362,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/delta/generic/Configuration.h b/config/examples/delta/generic/Configuration.h index 24748a3dde..c87f4ef81a 100644 --- a/config/examples/delta/generic/Configuration.h +++ b/config/examples/delta/generic/Configuration.h @@ -362,8 +362,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/delta/kossel_clear/Configuration.h b/config/examples/delta/kossel_clear/Configuration.h index 805093caba..08665fa94f 100644 --- a/config/examples/delta/kossel_clear/Configuration.h +++ b/config/examples/delta/kossel_clear/Configuration.h @@ -362,8 +362,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/delta/kossel_mini/Configuration.h b/config/examples/delta/kossel_mini/Configuration.h index c5abf71461..264de93d2c 100644 --- a/config/examples/delta/kossel_mini/Configuration.h +++ b/config/examples/delta/kossel_mini/Configuration.h @@ -362,8 +362,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/delta/kossel_pro/Configuration.h b/config/examples/delta/kossel_pro/Configuration.h index 0e658199da..c1b7aa50db 100644 --- a/config/examples/delta/kossel_pro/Configuration.h +++ b/config/examples/delta/kossel_pro/Configuration.h @@ -366,8 +366,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/delta/kossel_xl/Configuration.h b/config/examples/delta/kossel_xl/Configuration.h index c044b6b463..589ca10e26 100644 --- a/config/examples/delta/kossel_xl/Configuration.h +++ b/config/examples/delta/kossel_xl/Configuration.h @@ -362,8 +362,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE HIGH // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/gCreate/gMax1.5+/Configuration.h b/config/examples/gCreate/gMax1.5+/Configuration.h index 7112596ff5..0442d8a5d9 100644 --- a/config/examples/gCreate/gMax1.5+/Configuration.h +++ b/config/examples/gCreate/gMax1.5+/Configuration.h @@ -375,8 +375,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration.h b/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration.h index b8093315e4..1e835080f6 100644 --- a/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration.h +++ b/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration.h @@ -373,8 +373,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/makibox/Configuration.h b/config/examples/makibox/Configuration.h index 3c82d7fa1a..8ef36c219c 100644 --- a/config/examples/makibox/Configuration.h +++ b/config/examples/makibox/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown diff --git a/config/examples/tvrrug/Round2/Configuration.h b/config/examples/tvrrug/Round2/Configuration.h index 3b21525bb3..fa963aa613 100644 --- a/config/examples/tvrrug/Round2/Configuration.h +++ b/config/examples/tvrrug/Round2/Configuration.h @@ -371,8 +371,9 @@ //#define PS_OFF_SOUND // Beep 1s when power off #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay //#define POWER_OFF_TIMER // Enable M81 D to power off after a delay //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown