3D-printing/Configurations
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Configurations.git synced 2025-07-15 02:37:53 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions

📝 No longer experimental

Browse source 
Followup to 26fa70034e
This commit is contained in:
Scott Lahteine 2023-02-11 22:32:02 -06:00
parent 5896cbd33f
commit 9b253bb2e3
300 changed files with 600 additions and 600 deletions
Download patch file Download diff file Expand all files Collapse all files

4
config/examples/3DFabXYZ/Migbot/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/ADIMLab/Gantry v1/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/ADIMLab/Gantry v2/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/Alfawise/U20-bltouch/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/Alfawise/U20/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/AliExpress/UM2pExt/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/Anet/A2/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/Anet/A2plus/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/Anet/A6/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/Anet/A8/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/Anet/A8plus/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/Anet/A9/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/Anet/E10/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/Anet/E16/Stock/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/Anet/ET4+/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/Anet/ET4-Pro/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/Anet/ET4/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/Anet/ET4X/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/Anet/ET5-Pro/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/Anet/ET5/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/Anet/ET5X/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/AnyCubic/Chiron/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/AnyCubic/i3/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/ArmEd/Configuration_adv.h
View file

@ -380,7 +380,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -389,7 +389,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/Artillery/Genius Pro/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/Artillery/Genius/BLTouch/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/Artillery/Genius/V1/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/Artillery/Hornet/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/Artillery/Sidewinder X2/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/BIBO/TouchX/default/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/BIQU/B1 - SKR 1.4/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/BIQU/B1 - SKR 2/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/BIQU/B1 SE Plus/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/BIQU/B1 SE/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/BIQU/BX/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/BIQU/Thunder Standard/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/BQ/Hephestos/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/BQ/Hephestos_2/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/BQ/WITBOX/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/CTC/A13/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/CTC/Bizer/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/Cartesio/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/Creality/CR-10 V2/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/Creality/CR-10 V3/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/Creality/CR-20 Pro/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/Creality/CR-20/Stock/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/Creality/CR-30 PrintMill/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/Creality/CR-6 SE/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/Creality/CR-8/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/Creality/Ender-2/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/Creality/Ender-3 Max/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/Creality/Ender-3 S1/STM32F1/Configuration_adv.h
View file

@ -371,7 +371,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -380,7 +380,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/Creality/Ender-3 S1/STM32F4/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/Creality/Ender-3 V2 Neo/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

4
config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed. // Add an additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
@ -384,7 +384,7 @@
#endif #endif
/** /**
* Add an experimental additional term to the heater power, proportional to the fan speed. * Add an additional term to the heater power, proportional to the fan speed.
* A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
* You can either just add a constant compensation with the DEFAULT_Kf value * You can either just add a constant compensation with the DEFAULT_Kf value
* or follow the instruction below to get speed-dependent compensation. * or follow the instruction below to get speed-dependent compensation.

Some files were not shown because too many files have changed in this diff Show more