diff --git a/config/default/Configuration_adv.h b/config/default/Configuration_adv.h index d62acedeaa..4b37da4bbb 100644 --- a/config/default/Configuration_adv.h +++ b/config/default/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h index 30138dd175..ba187d7009 100644 --- a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h +++ b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h index aeb5619496..1424cb90b0 100644 --- a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h +++ b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h index 27c0adade8..aa60c3fec5 100644 --- a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h +++ b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h index 552c176307..4dc147101a 100644 --- a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h +++ b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h @@ -2550,7 +2550,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Alfawise/U20/Configuration_adv.h b/config/examples/Alfawise/U20/Configuration_adv.h index b68b36eb13..bc5e9af600 100644 --- a/config/examples/Alfawise/U20/Configuration_adv.h +++ b/config/examples/Alfawise/U20/Configuration_adv.h @@ -2541,7 +2541,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/AliExpress/UM2pExt/Configuration_adv.h b/config/examples/AliExpress/UM2pExt/Configuration_adv.h index 7992c0b374..abf386baf8 100644 --- a/config/examples/AliExpress/UM2pExt/Configuration_adv.h +++ b/config/examples/AliExpress/UM2pExt/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Anet/A2/Configuration_adv.h b/config/examples/Anet/A2/Configuration_adv.h index 02b16cc96e..3769871343 100644 --- a/config/examples/Anet/A2/Configuration_adv.h +++ b/config/examples/Anet/A2/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Anet/A2plus/Configuration_adv.h b/config/examples/Anet/A2plus/Configuration_adv.h index 02b16cc96e..3769871343 100644 --- a/config/examples/Anet/A2plus/Configuration_adv.h +++ b/config/examples/Anet/A2plus/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Anet/A6/Configuration_adv.h b/config/examples/Anet/A6/Configuration_adv.h index 98c37c4ab0..0c9b03f92b 100644 --- a/config/examples/Anet/A6/Configuration_adv.h +++ b/config/examples/Anet/A6/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Anet/A8/Configuration_adv.h b/config/examples/Anet/A8/Configuration_adv.h index abd3f09423..466a5bc62c 100644 --- a/config/examples/Anet/A8/Configuration_adv.h +++ b/config/examples/Anet/A8/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Anet/A8plus/Configuration_adv.h b/config/examples/Anet/A8plus/Configuration_adv.h index 7d4839d93b..f72707aca4 100644 --- a/config/examples/Anet/A8plus/Configuration_adv.h +++ b/config/examples/Anet/A8plus/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Anet/A9/Configuration_adv.h b/config/examples/Anet/A9/Configuration_adv.h index 3e7a405bdf..84756c4e53 100644 --- a/config/examples/Anet/A9/Configuration_adv.h +++ b/config/examples/Anet/A9/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Anet/E10/Configuration_adv.h b/config/examples/Anet/E10/Configuration_adv.h index 82e562428b..b953d8ae6a 100644 --- a/config/examples/Anet/E10/Configuration_adv.h +++ b/config/examples/Anet/E10/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h b/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h index 01a6bc2ae4..54ee024644 100644 --- a/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h +++ b/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Anet/E16/Stock/Configuration_adv.h b/config/examples/Anet/E16/Stock/Configuration_adv.h index 74c9f1b149..18ad5e0a9a 100644 --- a/config/examples/Anet/E16/Stock/Configuration_adv.h +++ b/config/examples/Anet/E16/Stock/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Anet/ET4+/Configuration_adv.h b/config/examples/Anet/ET4+/Configuration_adv.h index 9591e932fd..91f46ffb69 100644 --- a/config/examples/Anet/ET4+/Configuration_adv.h +++ b/config/examples/Anet/ET4+/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Anet/ET4-Pro/Configuration_adv.h b/config/examples/Anet/ET4-Pro/Configuration_adv.h index 9591e932fd..91f46ffb69 100644 --- a/config/examples/Anet/ET4-Pro/Configuration_adv.h +++ b/config/examples/Anet/ET4-Pro/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Anet/ET4/Configuration_adv.h b/config/examples/Anet/ET4/Configuration_adv.h index 45cca30ca5..b38beea724 100644 --- a/config/examples/Anet/ET4/Configuration_adv.h +++ b/config/examples/Anet/ET4/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Anet/ET4X/Configuration_adv.h b/config/examples/Anet/ET4X/Configuration_adv.h index 45cca30ca5..b38beea724 100644 --- a/config/examples/Anet/ET4X/Configuration_adv.h +++ b/config/examples/Anet/ET4X/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Anet/ET5-Pro/Configuration_adv.h b/config/examples/Anet/ET5-Pro/Configuration_adv.h index 618871e3de..e54cbe11e2 100644 --- a/config/examples/Anet/ET5-Pro/Configuration_adv.h +++ b/config/examples/Anet/ET5-Pro/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Anet/ET5/Configuration_adv.h b/config/examples/Anet/ET5/Configuration_adv.h index 618871e3de..e54cbe11e2 100644 --- a/config/examples/Anet/ET5/Configuration_adv.h +++ b/config/examples/Anet/ET5/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Anet/ET5X/Configuration_adv.h b/config/examples/Anet/ET5X/Configuration_adv.h index 618871e3de..e54cbe11e2 100644 --- a/config/examples/Anet/ET5X/Configuration_adv.h +++ b/config/examples/Anet/ET5X/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/AnyCubic/Chiron/Configuration_adv.h b/config/examples/AnyCubic/Chiron/Configuration_adv.h index 1b4556efeb..a0213e6197 100644 --- a/config/examples/AnyCubic/Chiron/Configuration_adv.h +++ b/config/examples/AnyCubic/Chiron/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h index 3a767fb0f1..2c0871f8ea 100644 --- a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h +++ b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h index f134f99b09..10d3044432 100644 --- a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h +++ b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h index 59a09e8026..7356c5f01a 100644 --- a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h +++ b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/AnyCubic/i3 Mega/Configuration_adv.h b/config/examples/AnyCubic/i3 Mega/Configuration_adv.h index 84194dc8ef..fd774edd59 100644 --- a/config/examples/AnyCubic/i3 Mega/Configuration_adv.h +++ b/config/examples/AnyCubic/i3 Mega/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/AnyCubic/i3/Configuration_adv.h b/config/examples/AnyCubic/i3/Configuration_adv.h index 76b94b1c55..327f46aea1 100644 --- a/config/examples/AnyCubic/i3/Configuration_adv.h +++ b/config/examples/AnyCubic/i3/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/ArmEd/Configuration_adv.h b/config/examples/ArmEd/Configuration_adv.h index 1c4aa534f3..607a823de9 100644 --- a/config/examples/ArmEd/Configuration_adv.h +++ b/config/examples/ArmEd/Configuration_adv.h @@ -2545,7 +2545,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Artillery/Genius Pro/Configuration_adv.h b/config/examples/Artillery/Genius Pro/Configuration_adv.h index 488333359b..0bff86cafa 100644 --- a/config/examples/Artillery/Genius Pro/Configuration_adv.h +++ b/config/examples/Artillery/Genius Pro/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Artillery/Genius/BLTouch/Configuration_adv.h b/config/examples/Artillery/Genius/BLTouch/Configuration_adv.h index 5ec44e969d..739216c80f 100644 --- a/config/examples/Artillery/Genius/BLTouch/Configuration_adv.h +++ b/config/examples/Artillery/Genius/BLTouch/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Artillery/Genius/V1/Configuration_adv.h b/config/examples/Artillery/Genius/V1/Configuration_adv.h index 1cfcf2bb7c..f0e1edbb75 100644 --- a/config/examples/Artillery/Genius/V1/Configuration_adv.h +++ b/config/examples/Artillery/Genius/V1/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Artillery/Hornet/Configuration_adv.h b/config/examples/Artillery/Hornet/Configuration_adv.h index 92728f6b45..fa35458cd2 100644 --- a/config/examples/Artillery/Hornet/Configuration_adv.h +++ b/config/examples/Artillery/Hornet/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h b/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h index 44cf25a50c..d79f02b6d9 100644 --- a/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h +++ b/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h b/config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h index 1cfcf2bb7c..f0e1edbb75 100644 --- a/config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h +++ b/config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Artillery/Sidewinder X2/Configuration_adv.h b/config/examples/Artillery/Sidewinder X2/Configuration_adv.h index 20ef5cac8a..f5b18af2aa 100644 --- a/config/examples/Artillery/Sidewinder X2/Configuration_adv.h +++ b/config/examples/Artillery/Sidewinder X2/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h index 76301de134..35935e7fe0 100644 --- a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/BIBO/TouchX/default/Configuration_adv.h b/config/examples/BIBO/TouchX/default/Configuration_adv.h index fd6e394fab..c22a10b783 100644 --- a/config/examples/BIBO/TouchX/default/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/default/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/BIQU/B1 - SKR 1.4/Configuration_adv.h b/config/examples/BIQU/B1 - SKR 1.4/Configuration_adv.h index 8ff4b25a7d..549aa1f0b3 100644 --- a/config/examples/BIQU/B1 - SKR 1.4/Configuration_adv.h +++ b/config/examples/BIQU/B1 - SKR 1.4/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/BIQU/B1 - SKR 2/Configuration_adv.h b/config/examples/BIQU/B1 - SKR 2/Configuration_adv.h index ff7a3179f4..2619063fa7 100644 --- a/config/examples/BIQU/B1 - SKR 2/Configuration_adv.h +++ b/config/examples/BIQU/B1 - SKR 2/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/BIQU/B1 SE Plus/Configuration_adv.h b/config/examples/BIQU/B1 SE Plus/Configuration_adv.h index ec7131373c..7b6e6faef0 100644 --- a/config/examples/BIQU/B1 SE Plus/Configuration_adv.h +++ b/config/examples/BIQU/B1 SE Plus/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/BIQU/BX/Configuration_adv.h b/config/examples/BIQU/BX/Configuration_adv.h index f388f29ae4..3dd98a0ba4 100644 --- a/config/examples/BIQU/BX/Configuration_adv.h +++ b/config/examples/BIQU/BX/Configuration_adv.h @@ -2541,7 +2541,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/BIQU/Thunder Standard/Configuration_adv.h b/config/examples/BIQU/Thunder Standard/Configuration_adv.h index 25ff94fe76..473ac3a7b0 100644 --- a/config/examples/BIQU/Thunder Standard/Configuration_adv.h +++ b/config/examples/BIQU/Thunder Standard/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/BQ/Hephestos/Configuration_adv.h b/config/examples/BQ/Hephestos/Configuration_adv.h index 2793c93ef4..453f8109fb 100644 --- a/config/examples/BQ/Hephestos/Configuration_adv.h +++ b/config/examples/BQ/Hephestos/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/BQ/Hephestos_2/Configuration_adv.h b/config/examples/BQ/Hephestos_2/Configuration_adv.h index a6871d3a3f..abda1c13d7 100644 --- a/config/examples/BQ/Hephestos_2/Configuration_adv.h +++ b/config/examples/BQ/Hephestos_2/Configuration_adv.h @@ -2548,7 +2548,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/BQ/WITBOX/Configuration_adv.h b/config/examples/BQ/WITBOX/Configuration_adv.h index 2793c93ef4..453f8109fb 100644 --- a/config/examples/BQ/WITBOX/Configuration_adv.h +++ b/config/examples/BQ/WITBOX/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/CTC/A13/Configuration_adv.h b/config/examples/CTC/A13/Configuration_adv.h index 7ad0d91ca7..efd7331f54 100644 --- a/config/examples/CTC/A13/Configuration_adv.h +++ b/config/examples/CTC/A13/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/CTC/Bizer/Configuration_adv.h b/config/examples/CTC/Bizer/Configuration_adv.h index 53a3a4de28..cd5ac44a06 100644 --- a/config/examples/CTC/Bizer/Configuration_adv.h +++ b/config/examples/CTC/Bizer/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Cartesio/Configuration_adv.h b/config/examples/Cartesio/Configuration_adv.h index d25fc9d2de..6bb2f76d25 100644 --- a/config/examples/Cartesio/Configuration_adv.h +++ b/config/examples/Cartesio/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 6645ae2e4c..c75c0c2072 100644 --- a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h index e9ddb09504..e3a74c4d8d 100644 --- a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h index bfa3f7442a..53a45ecacd 100644 --- a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h index 22e1f67113..6304ce9b89 100644 --- a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h index e0842f821b..047db07d72 100644 --- a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration_adv.h b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration_adv.h index 4ffb38be21..59624c8b31 100644 --- a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration_adv.h @@ -2523,7 +2523,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h index 22e1f67113..6304ce9b89 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration_adv.h b/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration_adv.h index 1e2ce353f3..90267a8f40 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Creality/CR-10 V2/Configuration_adv.h b/config/examples/Creality/CR-10 V2/Configuration_adv.h index 3255076684..53214a2820 100644 --- a/config/examples/Creality/CR-10 V2/Configuration_adv.h +++ b/config/examples/Creality/CR-10 V2/Configuration_adv.h @@ -2546,7 +2546,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Creality/CR-10 V3/Configuration_adv.h b/config/examples/Creality/CR-10 V3/Configuration_adv.h index 64b56fdaad..db611b7428 100644 --- a/config/examples/Creality/CR-10 V3/Configuration_adv.h +++ b/config/examples/Creality/CR-10 V3/Configuration_adv.h @@ -2548,7 +2548,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 964b7c16eb..dbfbb29d6c 100644 --- a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h index 18e97f7190..6933ce6f74 100644 --- a/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h index d7681ff1d9..ef9f4b9ae7 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration_adv.h index 2ade5b6a83..57898828bf 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index f8abcb5ed4..7c646b486e 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h index 89d4f9062a..61832033f5 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h index 2698299972..7cedcf7b04 100644 --- a/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Creality/CR-20 Pro/Configuration_adv.h b/config/examples/Creality/CR-20 Pro/Configuration_adv.h index da8735ccb3..0e24f66d9e 100644 --- a/config/examples/Creality/CR-20 Pro/Configuration_adv.h +++ b/config/examples/Creality/CR-20 Pro/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Creality/CR-20/Configuration_adv.h b/config/examples/Creality/CR-20/Configuration_adv.h index b31731b280..f769d92359 100644 --- a/config/examples/Creality/CR-20/Configuration_adv.h +++ b/config/examples/Creality/CR-20/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Creality/CR-30 PrintMill/Configuration_adv.h b/config/examples/Creality/CR-30 PrintMill/Configuration_adv.h index e582153cdd..03e29b1dcd 100644 --- a/config/examples/Creality/CR-30 PrintMill/Configuration_adv.h +++ b/config/examples/Creality/CR-30 PrintMill/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Creality/CR-6 SE/Configuration_adv.h b/config/examples/Creality/CR-6 SE/Configuration_adv.h index 87d6f25f7f..6fcacd8e96 100644 --- a/config/examples/Creality/CR-6 SE/Configuration_adv.h +++ b/config/examples/Creality/CR-6 SE/Configuration_adv.h @@ -2541,7 +2541,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Creality/CR-8/Configuration_adv.h b/config/examples/Creality/CR-8/Configuration_adv.h index 9f4ffab4c2..7ea8cf176e 100644 --- a/config/examples/Creality/CR-8/Configuration_adv.h +++ b/config/examples/Creality/CR-8/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration_adv.h b/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration_adv.h index fc13a4cf8f..399362f061 100644 --- a/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration_adv.h +++ b/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration_adv.h @@ -2541,7 +2541,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Creality/Ender-2/Configuration_adv.h b/config/examples/Creality/Ender-2/Configuration_adv.h index d0b3e14998..c7912fb665 100644 --- a/config/examples/Creality/Ender-2/Configuration_adv.h +++ b/config/examples/Creality/Ender-2/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Creality/Ender-3 Max/Configuration_adv.h b/config/examples/Creality/Ender-3 Max/Configuration_adv.h index 1128e86b19..d1649acb87 100644 --- a/config/examples/Creality/Ender-3 Max/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Max/Configuration_adv.h @@ -2541,7 +2541,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h index d7e33ea22a..d6b88eca5b 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h index 91b492f7e8..5ae98b828b 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index 91b492f7e8..5ae98b828b 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 54ed941fdf..5b63f4ccb3 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h index 60f5c6f5ab..3f572f9b9b 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h index e2936f2bac..b3ba391209 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h index 334859e263..1110c37670 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h @@ -2541,7 +2541,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h index 3c41776df9..a11b2a5b8e 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Creality/Ender-3 S1/STM32F1/Configuration_adv.h b/config/examples/Creality/Ender-3 S1/STM32F1/Configuration_adv.h index 7df2bc3f38..d468b28cb6 100644 --- a/config/examples/Creality/Ender-3 S1/STM32F1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 S1/STM32F1/Configuration_adv.h @@ -2536,7 +2536,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Creality/Ender-3 S1/STM32F4/Configuration_adv.h b/config/examples/Creality/Ender-3 S1/STM32F4/Configuration_adv.h index 59009a65cd..0008b97265 100644 --- a/config/examples/Creality/Ender-3 S1/STM32F4/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 S1/STM32F4/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration_adv.h index 62c040c673..914d742519 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration_adv.h @@ -2541,7 +2541,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration_adv.h index 9bf5efc456..1bc5b25aee 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration_adv.h @@ -2541,7 +2541,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration_adv.h index bea7169c26..4c79c3eb09 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration_adv.h @@ -2541,7 +2541,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration_adv.h index ee6194fc98..5bc89d0022 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration_adv.h @@ -2541,7 +2541,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration_adv.h index c64bca5aa9..1e107d37d9 100644 --- a/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration_adv.h @@ -2541,7 +2541,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration_adv.h index d23354c581..839b31a6a6 100644 --- a/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration_adv.h @@ -2541,7 +2541,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h index c7e14f5602..df0d041d5d 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h index ed00c43a8d..1f42f4f16c 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h index 786f0811df..9b87f9e639 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h index 84c483c238..c71546ee38 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h index 786f0811df..9b87f9e639 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h index 730d982cf3..ed308359e9 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h index f58930d5ee..524a0bfc69 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index f58930d5ee..524a0bfc69 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 57f570a75c..1b3d9c57ce 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h index 4cd4ba35f4..38496278f3 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h index a93c507c29..ccd8f17958 100644 --- a/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h index 63ac2b49b2..89c444923d 100644 --- a/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h index 1d94de1a65..7a63f99619 100644 --- a/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h index 456434e72f..61ed513615 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h index 456434e72f..61ed513615 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration_adv.h index f1ea68d867..104a2d896a 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h index 456434e72f..61ed513615 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h index 456434e72f..61ed513615 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h index 3f03aaf43a..afca0b769a 100644 --- a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h b/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h index 0d05054e8a..ac75e0c345 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h b/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h index 31f6532b7d..744dbac96e 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h index 815477daed..532d736a10 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration_adv.h b/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration_adv.h index 384c96158a..b5f225b0b0 100644 --- a/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Creality/Ender-4/Configuration_adv.h b/config/examples/Creality/Ender-4/Configuration_adv.h index 32689c51c7..d2beb4080e 100644 --- a/config/examples/Creality/Ender-4/Configuration_adv.h +++ b/config/examples/Creality/Ender-4/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Creality/Ender-5 Plus/Configuration_adv.h b/config/examples/Creality/Ender-5 Plus/Configuration_adv.h index 519d93f964..55f3db3f4e 100644 --- a/config/examples/Creality/Ender-5 Plus/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Plus/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 2 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (60*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h index 126c31ee35..eeb180e59e 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index f96913ed21..215a6791c8 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h index f713e0629d..e0b6f7c428 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h index 53cba3acce..719989f4dd 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h index edf49c8d7d..46ad160c64 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h @@ -2542,7 +2542,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h index f42757a505..18c475b5d2 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h index 126c31ee35..eeb180e59e 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h index 98e6ea14e1..8d0cba6342 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index f58930d5ee..524a0bfc69 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 2b1d51f23d..01698a7c00 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h index ef857275bf..4d3a2f013b 100644 --- a/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h index e4be4cc701..e146936ed1 100644 --- a/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Creality/Ender-6/Configuration_adv.h b/config/examples/Creality/Ender-6/Configuration_adv.h index 4c9c9a3ed8..b3b677970b 100644 --- a/config/examples/Creality/Ender-6/Configuration_adv.h +++ b/config/examples/Creality/Ender-6/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h index 99d807e424..146320e442 100644 --- a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h +++ b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Daycom/3DP-100/Configuration_adv.h b/config/examples/Daycom/3DP-100/Configuration_adv.h index 79382c06fa..9209c796f5 100644 --- a/config/examples/Daycom/3DP-100/Configuration_adv.h +++ b/config/examples/Daycom/3DP-100/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h b/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h index eccc9a93c9..a5fd12f36c 100644 --- a/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h +++ b/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/EasyThreeD/ET4000PLUS/Configuration_adv.h b/config/examples/EasyThreeD/ET4000PLUS/Configuration_adv.h index 18ab4d0ff1..e91e5d45bb 100644 --- a/config/examples/EasyThreeD/ET4000PLUS/Configuration_adv.h +++ b/config/examples/EasyThreeD/ET4000PLUS/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Einstart-S/Configuration_adv.h b/config/examples/Einstart-S/Configuration_adv.h index a9dc3521fb..a36376a80c 100644 --- a/config/examples/Einstart-S/Configuration_adv.h +++ b/config/examples/Einstart-S/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Elegoo/Neptune 2/Configuration_adv.h b/config/examples/Elegoo/Neptune 2/Configuration_adv.h index 62afd7b6c4..522436ebce 100644 --- a/config/examples/Elegoo/Neptune 2/Configuration_adv.h +++ b/config/examples/Elegoo/Neptune 2/Configuration_adv.h @@ -2542,7 +2542,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Eryone/Thinker SE/Configuration_adv.h b/config/examples/Eryone/Thinker SE/Configuration_adv.h index ff99f9257b..192f751ec5 100644 --- a/config/examples/Eryone/Thinker SE/Configuration_adv.h +++ b/config/examples/Eryone/Thinker SE/Configuration_adv.h @@ -2546,7 +2546,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Eryone/Thinker V2/Configuration_adv.h b/config/examples/Eryone/Thinker V2/Configuration_adv.h index 367839fc99..c88b2110cd 100644 --- a/config/examples/Eryone/Thinker V2/Configuration_adv.h +++ b/config/examples/Eryone/Thinker V2/Configuration_adv.h @@ -2546,7 +2546,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/FYSETC/AIO_II/Configuration_adv.h b/config/examples/FYSETC/AIO_II/Configuration_adv.h index c4d65c3c70..5f6046a084 100644 --- a/config/examples/FYSETC/AIO_II/Configuration_adv.h +++ b/config/examples/FYSETC/AIO_II/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/FYSETC/F6_13/Configuration_adv.h b/config/examples/FYSETC/F6_13/Configuration_adv.h index 52572d889c..75de20f032 100644 --- a/config/examples/FYSETC/F6_13/Configuration_adv.h +++ b/config/examples/FYSETC/F6_13/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/FYSETC/S6/Configuration_adv.h b/config/examples/FYSETC/S6/Configuration_adv.h index efce31337a..4f0245b8e6 100644 --- a/config/examples/FYSETC/S6/Configuration_adv.h +++ b/config/examples/FYSETC/S6/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Felix/DUAL/Configuration_adv.h b/config/examples/Felix/DUAL/Configuration_adv.h index 11632e00e7..8ded0466ac 100644 --- a/config/examples/Felix/DUAL/Configuration_adv.h +++ b/config/examples/Felix/DUAL/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Felix/Single/Configuration_adv.h b/config/examples/Felix/Single/Configuration_adv.h index 11632e00e7..8ded0466ac 100644 --- a/config/examples/Felix/Single/Configuration_adv.h +++ b/config/examples/Felix/Single/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/FlashForge/Creator 2X/Configuration_adv.h b/config/examples/FlashForge/Creator 2X/Configuration_adv.h index 9660724500..c6846ecfe8 100644 --- a/config/examples/FlashForge/Creator 2X/Configuration_adv.h +++ b/config/examples/FlashForge/Creator 2X/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 2 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/FlashForge/CreatorPro/Configuration_adv.h b/config/examples/FlashForge/CreatorPro/Configuration_adv.h index 013202d974..0c8e0e747a 100644 --- a/config/examples/FlashForge/CreatorPro/Configuration_adv.h +++ b/config/examples/FlashForge/CreatorPro/Configuration_adv.h @@ -2539,7 +2539,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/FlyingBear/P902/Configuration_adv.h b/config/examples/FlyingBear/P902/Configuration_adv.h index 2878385f91..196bf509df 100644 --- a/config/examples/FlyingBear/P902/Configuration_adv.h +++ b/config/examples/FlyingBear/P902/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/FlyingBear/P905H/Configuration_adv.h b/config/examples/FlyingBear/P905H/Configuration_adv.h index a0da34076a..8475ff59f3 100644 --- a/config/examples/FlyingBear/P905H/Configuration_adv.h +++ b/config/examples/FlyingBear/P905H/Configuration_adv.h @@ -2543,7 +2543,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/FoamCutter/rcKeith/Configuration_adv.h b/config/examples/FoamCutter/rcKeith/Configuration_adv.h index 1b8b143930..20fb8ba586 100644 --- a/config/examples/FoamCutter/rcKeith/Configuration_adv.h +++ b/config/examples/FoamCutter/rcKeith/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/FolgerTech/FT-5 R2/Configuration_adv.h b/config/examples/FolgerTech/FT-5 R2/Configuration_adv.h index 1f0e05506f..611b9738af 100644 --- a/config/examples/FolgerTech/FT-5 R2/Configuration_adv.h +++ b/config/examples/FolgerTech/FT-5 R2/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/config/examples/FolgerTech/i3-2020/Configuration_adv.h index 3bb1ef2916..9ef635d274 100644 --- a/config/examples/FolgerTech/i3-2020/Configuration_adv.h +++ b/config/examples/FolgerTech/i3-2020/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Formbot/Raptor/Configuration_adv.h b/config/examples/Formbot/Raptor/Configuration_adv.h index c85fcc5a40..00852f4b06 100644 --- a/config/examples/Formbot/Raptor/Configuration_adv.h +++ b/config/examples/Formbot/Raptor/Configuration_adv.h @@ -2542,7 +2542,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h index 8ec3065ce9..ff4bd3ace3 100644 --- a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h +++ b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Formbot/T_Rex_3/Configuration_adv.h b/config/examples/Formbot/T_Rex_3/Configuration_adv.h index c8f4f2d86c..3b9c9a00c0 100644 --- a/config/examples/Formbot/T_Rex_3/Configuration_adv.h +++ b/config/examples/Formbot/T_Rex_3/Configuration_adv.h @@ -2544,7 +2544,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Geeetech/A10/Configuration_adv.h b/config/examples/Geeetech/A10/Configuration_adv.h index e3d331c773..6612eec9e2 100644 --- a/config/examples/Geeetech/A10/Configuration_adv.h +++ b/config/examples/Geeetech/A10/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Geeetech/A10D/Configuration_adv.h b/config/examples/Geeetech/A10D/Configuration_adv.h index e268910be6..c8398e059c 100644 --- a/config/examples/Geeetech/A10D/Configuration_adv.h +++ b/config/examples/Geeetech/A10D/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Geeetech/A10M/Stock LCD/Configuration_adv.h b/config/examples/Geeetech/A10M/Stock LCD/Configuration_adv.h index 5af7f443e3..419ea0d04a 100644 --- a/config/examples/Geeetech/A10M/Stock LCD/Configuration_adv.h +++ b/config/examples/Geeetech/A10M/Stock LCD/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration_adv.h b/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration_adv.h index 5af7f443e3..419ea0d04a 100644 --- a/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration_adv.h +++ b/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Geeetech/A10PRO/Configuration_adv.h b/config/examples/Geeetech/A10PRO/Configuration_adv.h index e3d331c773..6612eec9e2 100644 --- a/config/examples/Geeetech/A10PRO/Configuration_adv.h +++ b/config/examples/Geeetech/A10PRO/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Geeetech/A10T/Stock LCD/Configuration_adv.h b/config/examples/Geeetech/A10T/Stock LCD/Configuration_adv.h index 5af7f443e3..419ea0d04a 100644 --- a/config/examples/Geeetech/A10T/Stock LCD/Configuration_adv.h +++ b/config/examples/Geeetech/A10T/Stock LCD/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration_adv.h b/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration_adv.h index 5af7f443e3..419ea0d04a 100644 --- a/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration_adv.h +++ b/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Geeetech/A20/Configuration_adv.h b/config/examples/Geeetech/A20/Configuration_adv.h index 304813985b..2c4e87c9cf 100644 --- a/config/examples/Geeetech/A20/Configuration_adv.h +++ b/config/examples/Geeetech/A20/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Geeetech/A20M/Configuration_adv.h b/config/examples/Geeetech/A20M/Configuration_adv.h index 304813985b..2c4e87c9cf 100644 --- a/config/examples/Geeetech/A20M/Configuration_adv.h +++ b/config/examples/Geeetech/A20M/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Geeetech/A20T/Configuration_adv.h b/config/examples/Geeetech/A20T/Configuration_adv.h index 304813985b..2c4e87c9cf 100644 --- a/config/examples/Geeetech/A20T/Configuration_adv.h +++ b/config/examples/Geeetech/A20T/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Geeetech/A30/Configuration_adv.h b/config/examples/Geeetech/A30/Configuration_adv.h index 376875eec8..5bd62b3150 100644 --- a/config/examples/Geeetech/A30/Configuration_adv.h +++ b/config/examples/Geeetech/A30/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Geeetech/A30M/Configuration_adv.h b/config/examples/Geeetech/A30M/Configuration_adv.h index 376875eec8..5bd62b3150 100644 --- a/config/examples/Geeetech/A30M/Configuration_adv.h +++ b/config/examples/Geeetech/A30M/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Geeetech/A30T/Configuration_adv.h b/config/examples/Geeetech/A30T/Configuration_adv.h index 376875eec8..5bd62b3150 100644 --- a/config/examples/Geeetech/A30T/Configuration_adv.h +++ b/config/examples/Geeetech/A30T/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Geeetech/D200/Configuration_adv.h b/config/examples/Geeetech/D200/Configuration_adv.h index ec1f6985e0..a227466b00 100644 --- a/config/examples/Geeetech/D200/Configuration_adv.h +++ b/config/examples/Geeetech/D200/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Geeetech/Duplicator5/Configuration_adv.h b/config/examples/Geeetech/Duplicator5/Configuration_adv.h index efce31337a..4f0245b8e6 100644 --- a/config/examples/Geeetech/Duplicator5/Configuration_adv.h +++ b/config/examples/Geeetech/Duplicator5/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Geeetech/E180/Configuration_adv.h b/config/examples/Geeetech/E180/Configuration_adv.h index 376875eec8..5bd62b3150 100644 --- a/config/examples/Geeetech/E180/Configuration_adv.h +++ b/config/examples/Geeetech/E180/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Geeetech/M201/Configuration_adv.h b/config/examples/Geeetech/M201/Configuration_adv.h index ec1f6985e0..a227466b00 100644 --- a/config/examples/Geeetech/M201/Configuration_adv.h +++ b/config/examples/Geeetech/M201/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Geeetech/MeCreator2/Configuration_adv.h b/config/examples/Geeetech/MeCreator2/Configuration_adv.h index fe94df3284..00d00be703 100644 --- a/config/examples/Geeetech/MeCreator2/Configuration_adv.h +++ b/config/examples/Geeetech/MeCreator2/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Geeetech/Me_creator/Configuration_adv.h b/config/examples/Geeetech/Me_creator/Configuration_adv.h index efce31337a..4f0245b8e6 100644 --- a/config/examples/Geeetech/Me_creator/Configuration_adv.h +++ b/config/examples/Geeetech/Me_creator/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Geeetech/Me_ducer/Configuration_adv.h b/config/examples/Geeetech/Me_ducer/Configuration_adv.h index 1b6179754e..da37383270 100644 --- a/config/examples/Geeetech/Me_ducer/Configuration_adv.h +++ b/config/examples/Geeetech/Me_ducer/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Geeetech/PI3A PRO/Configuration_adv.h b/config/examples/Geeetech/PI3A PRO/Configuration_adv.h index 06b9fd3d35..a79039cdb5 100644 --- a/config/examples/Geeetech/PI3A PRO/Configuration_adv.h +++ b/config/examples/Geeetech/PI3A PRO/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h index e3d331c773..6612eec9e2 100644 --- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h index e3d331c773..6612eec9e2 100644 --- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/HMS434/Configuration_adv.h b/config/examples/HMS434/Configuration_adv.h index bd8e1167a7..b31ee483e1 100644 --- a/config/examples/HMS434/Configuration_adv.h +++ b/config/examples/HMS434/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Infitary/i3-M508/Configuration_adv.h b/config/examples/Infitary/i3-M508/Configuration_adv.h index 9adbeb0dbd..81f24f606a 100644 --- a/config/examples/Infitary/i3-M508/Configuration_adv.h +++ b/config/examples/Infitary/i3-M508/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h b/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h index bbb7e87083..ee84692147 100644 --- a/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h +++ b/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h @@ -2539,7 +2539,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/JGAurora/A1/Configuration_adv.h b/config/examples/JGAurora/A1/Configuration_adv.h index 5e86206c52..419c27ea28 100644 --- a/config/examples/JGAurora/A1/Configuration_adv.h +++ b/config/examples/JGAurora/A1/Configuration_adv.h @@ -2546,7 +2546,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/JGAurora/A5/Configuration_adv.h b/config/examples/JGAurora/A5/Configuration_adv.h index c5a2c2781a..86fc1447a6 100644 --- a/config/examples/JGAurora/A5/Configuration_adv.h +++ b/config/examples/JGAurora/A5/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/JGAurora/A5S/Configuration_adv.h b/config/examples/JGAurora/A5S/Configuration_adv.h index fb3c1270fa..3c51d7eb4c 100644 --- a/config/examples/JGAurora/A5S/Configuration_adv.h +++ b/config/examples/JGAurora/A5S/Configuration_adv.h @@ -2546,7 +2546,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/JGAurora/Magic/Configuration_adv.h b/config/examples/JGAurora/Magic/Configuration_adv.h index b2e92b6838..c00b5cbe37 100644 --- a/config/examples/JGAurora/Magic/Configuration_adv.h +++ b/config/examples/JGAurora/Magic/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Kingroon/KP3/Configuration_adv.h b/config/examples/Kingroon/KP3/Configuration_adv.h index a2af7a5931..9e53e87597 100644 --- a/config/examples/Kingroon/KP3/Configuration_adv.h +++ b/config/examples/Kingroon/KP3/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Labists/ET4/Configuration_adv.h b/config/examples/Labists/ET4/Configuration_adv.h index 9591e932fd..91f46ffb69 100644 --- a/config/examples/Labists/ET4/Configuration_adv.h +++ b/config/examples/Labists/ET4/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/LulzBot/Mini2/Teensy/Configuration_adv.h b/config/examples/LulzBot/Mini2/Teensy/Configuration_adv.h index 1f0ed7e51d..738e27929f 100644 --- a/config/examples/LulzBot/Mini2/Teensy/Configuration_adv.h +++ b/config/examples/LulzBot/Mini2/Teensy/Configuration_adv.h @@ -2544,7 +2544,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/LulzBot/TAZ4/Configuration_adv.h b/config/examples/LulzBot/TAZ4/Configuration_adv.h index 3745258a7e..7272991ecd 100644 --- a/config/examples/LulzBot/TAZ4/Configuration_adv.h +++ b/config/examples/LulzBot/TAZ4/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/MBot/Cube/Configuration_adv.h b/config/examples/MBot/Cube/Configuration_adv.h index 57719a5123..e9581fa51e 100644 --- a/config/examples/MBot/Cube/Configuration_adv.h +++ b/config/examples/MBot/Cube/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h b/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h index a37b023d73..59f0e10621 100644 --- a/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h +++ b/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h @@ -2534,7 +2534,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/MakerParts/Configuration_adv.h b/config/examples/MakerParts/Configuration_adv.h index 75019c1632..77ca3b1174 100644 --- a/config/examples/MakerParts/Configuration_adv.h +++ b/config/examples/MakerParts/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/MakerTech3D/Proforge2sDual/Configuration_adv.h b/config/examples/MakerTech3D/Proforge2sDual/Configuration_adv.h index 1f0e05506f..611b9738af 100644 --- a/config/examples/MakerTech3D/Proforge2sDual/Configuration_adv.h +++ b/config/examples/MakerTech3D/Proforge2sDual/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Malyan/M150/Configuration_adv.h b/config/examples/Malyan/M150/Configuration_adv.h index a2d00a53e3..41f016be9c 100644 --- a/config/examples/Malyan/M150/Configuration_adv.h +++ b/config/examples/Malyan/M150/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Malyan/M200/Configuration_adv.h b/config/examples/Malyan/M200/Configuration_adv.h index f4378d6fc9..2e7779a161 100644 --- a/config/examples/Malyan/M200/Configuration_adv.h +++ b/config/examples/Malyan/M200/Configuration_adv.h @@ -2542,7 +2542,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/config/examples/Micromake/C1/enhanced/Configuration_adv.h index a2b117c2b6..35278b458a 100644 --- a/config/examples/Micromake/C1/enhanced/Configuration_adv.h +++ b/config/examples/Micromake/C1/enhanced/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Mks/Sbase/Configuration_adv.h b/config/examples/Mks/Sbase/Configuration_adv.h index cd95259a3f..2b470d092a 100644 --- a/config/examples/Mks/Sbase/Configuration_adv.h +++ b/config/examples/Mks/Sbase/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Modix/Big60/Configuration_adv.h b/config/examples/Modix/Big60/Configuration_adv.h index 1b61fe67cd..1b165a3883 100644 --- a/config/examples/Modix/Big60/Configuration_adv.h +++ b/config/examples/Modix/Big60/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Nextion/Configuration_adv.h b/config/examples/Nextion/Configuration_adv.h index 034ad8ee29..7c4a26c5b7 100644 --- a/config/examples/Nextion/Configuration_adv.h +++ b/config/examples/Nextion/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Opulo/Lumen_REV3/Configuration_adv.h b/config/examples/Opulo/Lumen_REV3/Configuration_adv.h index 65f0a65c3c..7e79da48a1 100644 --- a/config/examples/Opulo/Lumen_REV3/Configuration_adv.h +++ b/config/examples/Opulo/Lumen_REV3/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Ortur 4/Configuration_adv.h b/config/examples/Ortur 4/Configuration_adv.h index 55f6042f25..39536018fa 100644 --- a/config/examples/Ortur 4/Configuration_adv.h +++ b/config/examples/Ortur 4/Configuration_adv.h @@ -2541,7 +2541,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Polargraph/Configuration_adv.h b/config/examples/Polargraph/Configuration_adv.h index bd47e7d385..c713d38334 100644 --- a/config/examples/Polargraph/Configuration_adv.h +++ b/config/examples/Polargraph/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Prusa/MK3/Configuration_adv.h b/config/examples/Prusa/MK3/Configuration_adv.h index 1173bc8bd2..8b3034ae10 100644 --- a/config/examples/Prusa/MK3/Configuration_adv.h +++ b/config/examples/Prusa/MK3/Configuration_adv.h @@ -2542,7 +2542,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h index 77771b5a38..a24c3db8e1 100644 --- a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h +++ b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h @@ -2541,7 +2541,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Qidi/Qidi 1/Configuration_adv.h b/config/examples/Qidi/Qidi 1/Configuration_adv.h index 17d331df82..72bc7d1f82 100644 --- a/config/examples/Qidi/Qidi 1/Configuration_adv.h +++ b/config/examples/Qidi/Qidi 1/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Raiscube/A8r/Configuration_adv.h b/config/examples/Raiscube/A8r/Configuration_adv.h index 98c37c4ab0..0c9b03f92b 100644 --- a/config/examples/Raiscube/A8r/Configuration_adv.h +++ b/config/examples/Raiscube/A8r/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/RapideLite/RL200/Configuration_adv.h b/config/examples/RapideLite/RL200/Configuration_adv.h index efce31337a..4f0245b8e6 100644 --- a/config/examples/RapideLite/RL200/Configuration_adv.h +++ b/config/examples/RapideLite/RL200/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Renkforce/RF100/Configuration_adv.h b/config/examples/Renkforce/RF100/Configuration_adv.h index 0b14750501..fd8338147a 100644 --- a/config/examples/Renkforce/RF100/Configuration_adv.h +++ b/config/examples/Renkforce/RF100/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Renkforce/RF100XL/Configuration_adv.h b/config/examples/Renkforce/RF100XL/Configuration_adv.h index 0b14750501..fd8338147a 100644 --- a/config/examples/Renkforce/RF100XL/Configuration_adv.h +++ b/config/examples/Renkforce/RF100XL/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Renkforce/RF100v2/Configuration_adv.h b/config/examples/Renkforce/RF100v2/Configuration_adv.h index 0b14750501..fd8338147a 100644 --- a/config/examples/Renkforce/RF100v2/Configuration_adv.h +++ b/config/examples/Renkforce/RF100v2/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/RigidBot/Configuration_adv.h b/config/examples/RigidBot/Configuration_adv.h index 553066ffe3..6ac0f5335a 100644 --- a/config/examples/RigidBot/Configuration_adv.h +++ b/config/examples/RigidBot/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/SCARA/MP_SCARA/Configuration_adv.h b/config/examples/SCARA/MP_SCARA/Configuration_adv.h index f74676ba89..0ebe0be225 100644 --- a/config/examples/SCARA/MP_SCARA/Configuration_adv.h +++ b/config/examples/SCARA/MP_SCARA/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/SCARA/Morgan/Configuration_adv.h b/config/examples/SCARA/Morgan/Configuration_adv.h index 10733b91df..b6733ea5b5 100644 --- a/config/examples/SCARA/Morgan/Configuration_adv.h +++ b/config/examples/SCARA/Morgan/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h index 486092d1c4..98ae859868 100644 --- a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h +++ b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Sanguinololu/Configuration_adv.h b/config/examples/Sanguinololu/Configuration_adv.h index 389774dce4..ccee4ea2a6 100644 --- a/config/examples/Sanguinololu/Configuration_adv.h +++ b/config/examples/Sanguinololu/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Simulator/Configuration_adv.h b/config/examples/Simulator/Configuration_adv.h index 7c9666ac5b..de51c6f20b 100644 --- a/config/examples/Simulator/Configuration_adv.h +++ b/config/examples/Simulator/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration_adv.h b/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration_adv.h index e42d130809..4f181659a1 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 11ee63683e..55e3efebef 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h index f9aed11fe0..1317b29036 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h b/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h index fb7fe48fe5..2ae629fb98 100644 --- a/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h b/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h index 7a3c1042fd..65dd97bca3 100644 --- a/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h @@ -2538,7 +2538,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Sunlu/S8/Configuration_adv.h b/config/examples/Sunlu/S8/Configuration_adv.h index d2343d9f05..3ff6dfc050 100644 --- a/config/examples/Sunlu/S8/Configuration_adv.h +++ b/config/examples/Sunlu/S8/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h b/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h index cff7dab87a..bee87ae183 100644 --- a/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h +++ b/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Tevo/Michelangelo/Configuration_adv.h b/config/examples/Tevo/Michelangelo/Configuration_adv.h index 173b4545ba..0967c25c21 100644 --- a/config/examples/Tevo/Michelangelo/Configuration_adv.h +++ b/config/examples/Tevo/Michelangelo/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Tevo/Nereus/Configuration_adv.h b/config/examples/Tevo/Nereus/Configuration_adv.h index c7e591deb5..dbfe38ee8e 100644 --- a/config/examples/Tevo/Nereus/Configuration_adv.h +++ b/config/examples/Tevo/Nereus/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Tevo/Tarantula Pro/Configuration_adv.h b/config/examples/Tevo/Tarantula Pro/Configuration_adv.h index c576242ce2..8b777b2e55 100644 --- a/config/examples/Tevo/Tarantula Pro/Configuration_adv.h +++ b/config/examples/Tevo/Tarantula Pro/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h index 1aaa6aa7f9..36063ca6c7 100644 --- a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h +++ b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h index 1aaa6aa7f9..36063ca6c7 100644 --- a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h +++ b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/TinyBoy2/Configuration_adv.h b/config/examples/TinyBoy2/Configuration_adv.h index 2bf5fb0ebf..5de7291289 100644 --- a/config/examples/TinyBoy2/Configuration_adv.h +++ b/config/examples/TinyBoy2/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Tronxy/X3A/Configuration_adv.h b/config/examples/Tronxy/X3A/Configuration_adv.h index 466302f888..254d666e7c 100644 --- a/config/examples/Tronxy/X3A/Configuration_adv.h +++ b/config/examples/Tronxy/X3A/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Tronxy/X5S-2E/Configuration_adv.h b/config/examples/Tronxy/X5S-2E/Configuration_adv.h index d6190d2300..5d2b903765 100644 --- a/config/examples/Tronxy/X5S-2E/Configuration_adv.h +++ b/config/examples/Tronxy/X5S-2E/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Tronxy/X5SA-2E/Configuration_adv.h b/config/examples/Tronxy/X5SA-2E/Configuration_adv.h index d9be14aaca..d92eb78bff 100644 --- a/config/examples/Tronxy/X5SA-2E/Configuration_adv.h +++ b/config/examples/Tronxy/X5SA-2E/Configuration_adv.h @@ -2544,7 +2544,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Tronxy/X5SA/Configuration_adv.h b/config/examples/Tronxy/X5SA/Configuration_adv.h index fd5d75ed16..9eef8eb962 100644 --- a/config/examples/Tronxy/X5SA/Configuration_adv.h +++ b/config/examples/Tronxy/X5SA/Configuration_adv.h @@ -2544,7 +2544,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Two Trees/BlueR Plus/Configuration_adv.h b/config/examples/Two Trees/BlueR Plus/Configuration_adv.h index 7e78b5edfd..5700b9c4d7 100644 --- a/config/examples/Two Trees/BlueR Plus/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR Plus/Configuration_adv.h @@ -2541,7 +2541,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h b/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h index d6d48c4655..28414a264f 100644 --- a/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h @@ -2542,7 +2542,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h b/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h index d6d48c4655..28414a264f 100644 --- a/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h @@ -2542,7 +2542,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h b/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h index d6d48c4655..28414a264f 100644 --- a/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h @@ -2542,7 +2542,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration_adv.h b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration_adv.h index 59fa1bf802..65e0ad0fc7 100644 --- a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration_adv.h +++ b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration_adv.h @@ -2546,7 +2546,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h index 917b8787b8..c42481c2ac 100644 --- a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h +++ b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h @@ -2546,7 +2546,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h b/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h index 9adb166b05..e7f2ca6ac5 100644 --- a/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h +++ b/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h @@ -2542,7 +2542,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/UltiMachine/Archim1/Configuration_adv.h b/config/examples/UltiMachine/Archim1/Configuration_adv.h index 97d5b7f5a5..9905a2df38 100644 --- a/config/examples/UltiMachine/Archim1/Configuration_adv.h +++ b/config/examples/UltiMachine/Archim1/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/UltiMachine/Archim2/Configuration_adv.h b/config/examples/UltiMachine/Archim2/Configuration_adv.h index fa0dacc34b..114687e4a8 100644 --- a/config/examples/UltiMachine/Archim2/Configuration_adv.h +++ b/config/examples/UltiMachine/Archim2/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Ultimaker/Ultimaker 2+/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker 2+/Configuration_adv.h index 9f0616ccd4..dc0409f745 100644 --- a/config/examples/Ultimaker/Ultimaker 2+/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker 2+/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Ultimaker/Ultimaker 2/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker 2/Configuration_adv.h index cc8774a688..10aa2358dd 100644 --- a/config/examples/Ultimaker/Ultimaker 2/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker 2/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h index 6a56419fde..a9144cde0d 100644 --- a/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration_adv.h index 0428ddb4a3..8f8655d961 100644 --- a/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/VORONDesign/Configuration_adv.h b/config/examples/VORONDesign/Configuration_adv.h index 5c8ffc3f05..bb08165feb 100644 --- a/config/examples/VORONDesign/Configuration_adv.h +++ b/config/examples/VORONDesign/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Velleman/K8200 Upgraded/Configuration_adv.h b/config/examples/Velleman/K8200 Upgraded/Configuration_adv.h index 7a180971f9..7d5a190fbd 100644 --- a/config/examples/Velleman/K8200 Upgraded/Configuration_adv.h +++ b/config/examples/Velleman/K8200 Upgraded/Configuration_adv.h @@ -2556,7 +2556,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Velleman/K8200/Configuration_adv.h b/config/examples/Velleman/K8200/Configuration_adv.h index 965374b42d..f6494aa9b1 100644 --- a/config/examples/Velleman/K8200/Configuration_adv.h +++ b/config/examples/Velleman/K8200/Configuration_adv.h @@ -2553,7 +2553,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h b/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h index 1d84e739ec..da0ee5178f 100644 --- a/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h +++ b/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Velleman/K8400/Single-head/Configuration_adv.h b/config/examples/Velleman/K8400/Single-head/Configuration_adv.h index 1d84e739ec..da0ee5178f 100644 --- a/config/examples/Velleman/K8400/Single-head/Configuration_adv.h +++ b/config/examples/Velleman/K8400/Single-head/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/WASP/PowerWASP/Configuration_adv.h b/config/examples/WASP/PowerWASP/Configuration_adv.h index 2957fcae98..fd4791122d 100644 --- a/config/examples/WASP/PowerWASP/Configuration_adv.h +++ b/config/examples/WASP/PowerWASP/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h b/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h index ace10a2f12..10ccd1cd50 100644 --- a/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h index 811309eb0a..f5cd25ead2 100644 --- a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h @@ -2542,7 +2542,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h index 2cff0eb06f..17949f1c8c 100644 --- a/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h index 208e2cb868..d5bf0fe1bb 100644 --- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Weedo/Tina2/V2/Configuration_adv.h b/config/examples/Weedo/Tina2/V2/Configuration_adv.h index 4085fee69c..c93d98214d 100644 --- a/config/examples/Weedo/Tina2/V2/Configuration_adv.h +++ b/config/examples/Weedo/Tina2/V2/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Weedo/Tina2/V3/Configuration_adv.h b/config/examples/Weedo/Tina2/V3/Configuration_adv.h index 4085fee69c..c93d98214d 100644 --- a/config/examples/Weedo/Tina2/V3/Configuration_adv.h +++ b/config/examples/Weedo/Tina2/V3/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Weistek/wt150/Configuration_adv.h b/config/examples/Weistek/wt150/Configuration_adv.h index bf10b2762b..e765e6c1e1 100644 --- a/config/examples/Weistek/wt150/Configuration_adv.h +++ b/config/examples/Weistek/wt150/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Zonestar/P802M/Configuration_adv.h b/config/examples/Zonestar/P802M/Configuration_adv.h index 25e6ca01f8..b6b18f3309 100644 --- a/config/examples/Zonestar/P802M/Configuration_adv.h +++ b/config/examples/Zonestar/P802M/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h index ced732e465..a0c5aa609f 100644 --- a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h +++ b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h index cad309c757..93b94d5b42 100755 --- a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h +++ b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h index 364fb8f552..af16cbe756 100644 --- a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h @@ -2542,7 +2542,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h index 5dac91ef30..9f615be026 100644 --- a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h @@ -2541,7 +2541,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/delta/Anycubic/Predator/Configuration_adv.h b/config/examples/delta/Anycubic/Predator/Configuration_adv.h index 8c692402b3..366a63658e 100644 --- a/config/examples/delta/Anycubic/Predator/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Predator/Configuration_adv.h @@ -2543,7 +2543,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h index 1b7bcca2b6..57ae3562ad 100644 --- a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h +++ b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h @@ -2541,7 +2541,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h index 1b7bcca2b6..57ae3562ad 100644 --- a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h +++ b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h @@ -2541,7 +2541,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h index 5200abbedb..cb39efed76 100644 --- a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h +++ b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h @@ -2541,7 +2541,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h b/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h index fd7107b916..505f9203dd 100644 --- a/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h +++ b/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h @@ -2541,7 +2541,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h b/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h index 02ef8b0b23..000b7b210a 100644 --- a/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h +++ b/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h @@ -2542,7 +2542,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h index 5fa88549a2..995fe27876 100644 --- a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h +++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h @@ -2541,7 +2541,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/delta/FLSUN/kossel/Configuration_adv.h b/config/examples/delta/FLSUN/kossel/Configuration_adv.h index 5fa88549a2..995fe27876 100644 --- a/config/examples/delta/FLSUN/kossel/Configuration_adv.h +++ b/config/examples/delta/FLSUN/kossel/Configuration_adv.h @@ -2541,7 +2541,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h index 752b0bce4e..c73c9be364 100644 --- a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h +++ b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h @@ -2541,7 +2541,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/delta/Geeetech/G2/Configuration_adv.h b/config/examples/delta/Geeetech/G2/Configuration_adv.h index f91224ec5b..3541de433d 100644 --- a/config/examples/delta/Geeetech/G2/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2/Configuration_adv.h @@ -2541,7 +2541,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h b/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h index f91224ec5b..3541de433d 100644 --- a/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h @@ -2541,7 +2541,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/delta/Geeetech/G2S/Configuration_adv.h b/config/examples/delta/Geeetech/G2S/Configuration_adv.h index f91224ec5b..3541de433d 100644 --- a/config/examples/delta/Geeetech/G2S/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2S/Configuration_adv.h @@ -2541,7 +2541,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h b/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h index f91224ec5b..3541de433d 100644 --- a/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h @@ -2541,7 +2541,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h index f75250a560..71f99f1567 100644 --- a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h +++ b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h @@ -2541,7 +2541,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h b/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h index b6beab0dda..b407676ab2 100644 --- a/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h +++ b/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h @@ -2541,7 +2541,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/delta/MKS/SBASE/Configuration_adv.h b/config/examples/delta/MKS/SBASE/Configuration_adv.h index 9654d2cebc..b9e1c38aa5 100644 --- a/config/examples/delta/MKS/SBASE/Configuration_adv.h +++ b/config/examples/delta/MKS/SBASE/Configuration_adv.h @@ -2541,7 +2541,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/delta/Malyan M300/Configuration_adv.h b/config/examples/delta/Malyan M300/Configuration_adv.h index 58d3ac8310..eb9a9a3148 100644 --- a/config/examples/delta/Malyan M300/Configuration_adv.h +++ b/config/examples/delta/Malyan M300/Configuration_adv.h @@ -2541,7 +2541,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/delta/Tevo Little Monster/Configuration_adv.h b/config/examples/delta/Tevo Little Monster/Configuration_adv.h index c7cbf4fae2..197ac74729 100644 --- a/config/examples/delta/Tevo Little Monster/Configuration_adv.h +++ b/config/examples/delta/Tevo Little Monster/Configuration_adv.h @@ -2541,7 +2541,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/delta/Velleman/K8800/Configuration_adv.h b/config/examples/delta/Velleman/K8800/Configuration_adv.h index 4d88890f7a..7bd3f13a72 100644 --- a/config/examples/delta/Velleman/K8800/Configuration_adv.h +++ b/config/examples/delta/Velleman/K8800/Configuration_adv.h @@ -2533,7 +2533,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/delta/generic/Configuration_adv.h b/config/examples/delta/generic/Configuration_adv.h index 752b0bce4e..c73c9be364 100644 --- a/config/examples/delta/generic/Configuration_adv.h +++ b/config/examples/delta/generic/Configuration_adv.h @@ -2541,7 +2541,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/delta/kossel_clear/Configuration_adv.h b/config/examples/delta/kossel_clear/Configuration_adv.h index 7e64872fcf..63bf45175b 100644 --- a/config/examples/delta/kossel_clear/Configuration_adv.h +++ b/config/examples/delta/kossel_clear/Configuration_adv.h @@ -2541,7 +2541,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/delta/kossel_xl/Configuration_adv.h b/config/examples/delta/kossel_xl/Configuration_adv.h index cb463eeaca..47f63fda3e 100644 --- a/config/examples/delta/kossel_xl/Configuration_adv.h +++ b/config/examples/delta/kossel_xl/Configuration_adv.h @@ -2541,7 +2541,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/config/examples/gCreate/gMax1.5+/Configuration_adv.h index 4902023be5..b63ad227c7 100644 --- a/config/examples/gCreate/gMax1.5+/Configuration_adv.h +++ b/config/examples/gCreate/gMax1.5+/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration_adv.h b/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration_adv.h index 9bb93b97e0..9185c53611 100644 --- a/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration_adv.h +++ b/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/makibox/Configuration_adv.h b/config/examples/makibox/Configuration_adv.h index 47bf05f811..80be5e5f04 100644 --- a/config/examples/makibox/Configuration_adv.h +++ b/config/examples/makibox/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/config/examples/tvrrug/Round2/Configuration_adv.h b/config/examples/tvrrug/Round2/Configuration_adv.h index 5c05ec847c..1e144b672e 100644 --- a/config/examples/tvrrug/Round2/Configuration_adv.h +++ b/config/examples/tvrrug/Round2/Configuration_adv.h @@ -2540,7 +2540,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip