Add Laser Test Pulse options

config/default/Configuration_adv.h

@@ -3032,6 +3032,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/3DFabXYZ/Migbot/Configuration_adv.h

@@ -3032,6 +3032,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/ADIMLab/Gantry v1/Configuration_adv.h

@@ -3032,6 +3032,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/ADIMLab/Gantry v2/Configuration_adv.h

@@ -3032,6 +3032,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/AlephObjects/TAZ4/Configuration_adv.h

@@ -3032,6 +3032,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/Alfawise/U20-bltouch/Configuration_adv.h

@@ -3034,6 +3034,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/Alfawise/U20/Configuration_adv.h

@@ -3033,6 +3033,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/AliExpress/UM2pExt/Configuration_adv.h

@@ -3034,6 +3034,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/Anet/A2/Configuration_adv.h

@@ -3032,6 +3032,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/Anet/A2plus/Configuration_adv.h

@@ -3032,6 +3032,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/Anet/A6/Configuration_adv.h

@@ -3032,6 +3032,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/Anet/A8/Configuration_adv.h

@@ -3032,6 +3032,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/Anet/A8plus/Configuration_adv.h

@@ -3032,6 +3032,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/Anet/A9/Configuration_adv.h

@@ -3032,6 +3032,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/Anet/E10/Configuration_adv.h

@@ -3032,6 +3032,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h

@@ -3032,6 +3032,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/Anet/E16/Stock/Configuration_adv.h

@@ -3032,6 +3032,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/Anet/ET4+/Configuration_adv.h

@@ -3032,6 +3032,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/Anet/ET4-Pro/Configuration_adv.h

@@ -3031,6 +3031,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/Anet/ET4/Configuration_adv.h

@@ -3032,6 +3032,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/Anet/ET4X/Configuration_adv.h

@@ -3032,6 +3032,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/Anet/ET5-Pro/Configuration_adv.h

@@ -3032,6 +3032,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/Anet/ET5/Configuration_adv.h

@@ -3032,6 +3032,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/Anet/ET5X/Configuration_adv.h

@@ -3032,6 +3032,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/AnyCubic/Chiron/Configuration_adv.h

@@ -3032,6 +3032,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h

@@ -3032,6 +3032,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h

@@ -3032,6 +3032,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/AnyCubic/i3 Mega/Configuration_adv.h

@@ -3032,6 +3032,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/AnyCubic/i3/Configuration_adv.h

@@ -3032,6 +3032,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/ArmEd/Configuration_adv.h

@@ -3036,6 +3036,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/Artillery/Genius/Configuration_adv.h

@@ -3032,6 +3032,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/Artillery/Sidewinder X1/Configuration_adv.h

@@ -3032,6 +3032,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration_adv.h

@@ -3032,6 +3032,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/BIBO/TouchX/cyclops/Configuration_adv.h

@@ -3032,6 +3032,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/BIBO/TouchX/default/Configuration_adv.h

@@ -3032,6 +3032,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/BIQU/B1-BLTouch/Configuration_adv.h

@@ -3032,6 +3032,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/BIQU/B1/Configuration_adv.h

@@ -3032,6 +3032,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/BQ/Hephestos/Configuration_adv.h

@@ -3032,6 +3032,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/BQ/Hephestos_2/Configuration_adv.h

@@ -3040,6 +3040,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/BQ/WITBOX/Configuration_adv.h

@@ -3032,6 +3032,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/Cartesio/Configuration_adv.h

@@ -3032,6 +3032,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h

@@ -3032,6 +3032,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h

@@ -3032,6 +3032,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h

@@ -3032,6 +3032,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h

@@ -3032,6 +3032,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/Creality/CR-10 V2/Configuration_adv.h

@@ -3035,6 +3035,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h

@@ -3032,6 +3032,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h

@@ -3032,6 +3032,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h

@@ -3032,6 +3032,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h

@@ -3032,6 +3032,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/Creality/CR-20 Pro/Configuration_adv.h

@@ -3032,6 +3032,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/Creality/CR-20/Configuration_adv.h

@@ -3032,6 +3032,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/Creality/CR-6 SE/Configuration_adv.h

@@ -3033,6 +3033,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/Creality/CR-8/Configuration_adv.h

@@ -3032,6 +3032,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/Creality/Ender-2/Configuration_adv.h

@@ -3032,6 +3032,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h

@@ -3032,6 +3032,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h

@@ -3032,6 +3032,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h

@@ -3032,6 +3032,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h

@@ -3032,6 +3032,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h

@@ -3033,6 +3033,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h

@@ -3032,6 +3032,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/Creality/Ender-3 V2/Configuration_adv.h

@@ -3033,6 +3033,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h

@@ -3032,6 +3032,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h

@@ -3032,6 +3032,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h

@@ -3032,6 +3032,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h

@@ -3032,6 +3032,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h

@@ -3032,6 +3032,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h

@@ -3032,6 +3032,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h

@@ -3032,6 +3032,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h

@@ -3032,6 +3032,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h

@@ -3032,6 +3032,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h

@@ -3032,6 +3032,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h

@@ -3032,6 +3032,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h

@@ -3032,6 +3032,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h

@@ -3032,6 +3032,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h

@@ -3032,6 +3032,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h

@@ -3032,6 +3032,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/Creality/Ender-3/MKS Robin E3 1.0/Configuration_adv.h

@@ -3032,6 +3032,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h

@@ -3032,6 +3032,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/Creality/Ender-4/Configuration_adv.h

@@ -3032,6 +3032,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/Creality/Ender-5 Plus/Configuration_adv.h

@@ -3032,6 +3032,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h

@@ -3032,6 +3032,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h

@@ -3032,6 +3032,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h

@@ -3032,6 +3032,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h

@@ -3032,6 +3032,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h

@@ -3032,6 +3032,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h

@@ -3032,6 +3032,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h

@@ -3036,6 +3036,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h

@@ -3032,6 +3032,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h

@@ -3032,6 +3032,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h

@@ -3032,6 +3032,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h

@@ -3032,6 +3032,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h

@@ -3032,6 +3032,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h

@@ -3032,6 +3032,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/Dagoma/Disco Ultimate/Configuration_adv.h

@@ -3032,6 +3032,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/Daycom/3DP-100/Configuration_adv.h

@@ -3032,6 +3032,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h

@@ -3032,6 +3032,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/Einstart-S/Configuration_adv.h

@@ -3032,6 +3032,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/FYSETC/AIO_II/Configuration_adv.h

@@ -3032,6 +3032,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)

config/examples/FYSETC/F6_13/Configuration_adv.h

@@ -3032,6 +3032,10 @@
     #define SPEED_POWER_MAX             100    // (%) 0-100
     #define SPEED_POWER_STARTUP          80    // (%) M3/M4 speed/power default (with no arguments)
 
+    // Define the minimum and maximum test pulse time values for a laser test fire function
+    #define LASER_TEST_PULSE_MIN           1   // Used with Laser Control Menu
+    #define LASER_TEST_PULSE_MAX         999   // Caution: Menu may not show more than 3 characters
+
     /**
      * Enable inline laser power to be handled in the planner / stepper routines.
      * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)