✨ Immediate Buttons and Menu Items

MarlinFirmware/Marlin#28180

config/default/Configuration_adv.h

@@ -4123,22 +4123,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4155,22 +4160,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4187,6 +4197,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and run the G-code immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4195,6 +4206,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4203,6 +4215,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/3DFabXYZ/Migbot/Configuration_adv.h

@@ -4144,18 +4144,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Probe Mesh&Save"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 P1\nG29 P3 T0\nG29 S0 A F10\nG29 J2\nM500"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Manual Mesh&Save"
   #define MAIN_MENU_ITEM_2_GCODE "G28\nG29 P4 R999 T\nG29 S0 A F10\nM500"
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   #define MAIN_MENU_ITEM_3_DESC "Print Test Pattern"
   #define MAIN_MENU_ITEM_3_GCODE "G26 C P O2.25" // Do a typical test sequence
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   #define MAIN_MENU_ITEM_4_DESC "Move Bed Forward"
   #define MAIN_MENU_ITEM_4_GCODE "G28 X0 Y0\nG1 X0 Y180 F3000\nM84" // move X/Y to min endstops & Feed the bed forward & steppers off
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
+
+  //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
+  //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
+  //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4172,22 +4181,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4204,6 +4218,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4212,6 +4227,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4220,6 +4236,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/3DMatik/XL/Configuration_adv.h

@@ -4144,22 +4144,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4176,22 +4181,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4208,6 +4218,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4216,6 +4227,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4224,6 +4236,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/ADIMLab/Gantry v1/Configuration_adv.h

@@ -4144,22 +4144,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4176,22 +4181,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4208,6 +4218,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4216,6 +4227,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4224,6 +4236,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/ADIMLab/Gantry v2/Configuration_adv.h

@@ -4144,22 +4144,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4176,22 +4181,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4208,6 +4218,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4216,6 +4227,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4224,6 +4236,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/Alfawise/U20-bltouch/Configuration_adv.h

@@ -4154,22 +4154,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4186,22 +4191,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4218,6 +4228,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4226,6 +4237,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4234,6 +4246,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/Alfawise/U20/Configuration_adv.h

@@ -4145,22 +4145,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4177,22 +4182,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4209,6 +4219,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4217,6 +4228,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4225,6 +4237,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/AliExpress/CL-260/Configuration_adv.h

@@ -4144,22 +4144,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4176,22 +4181,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4208,6 +4218,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4216,6 +4227,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4224,6 +4236,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/AliExpress/UM2pExt/Configuration_adv.h

@@ -4146,22 +4146,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4178,22 +4183,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4210,6 +4220,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4218,6 +4229,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4226,6 +4238,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/Anet/A2/Configuration_adv.h

@@ -4144,22 +4144,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4176,22 +4181,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4208,6 +4218,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4216,6 +4227,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4224,6 +4236,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/Anet/A2plus/Configuration_adv.h

@@ -4144,22 +4144,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4176,22 +4181,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4208,6 +4218,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4216,6 +4227,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4224,6 +4236,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/Anet/A6/Configuration_adv.h

@@ -4144,22 +4144,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4176,22 +4181,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4208,6 +4218,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4216,6 +4227,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4224,6 +4236,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/Anet/A8/Configuration_adv.h

@@ -4144,22 +4144,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4176,22 +4181,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4208,6 +4218,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4216,6 +4227,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4224,6 +4236,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/Anet/A8plus/Configuration_adv.h

@@ -4144,22 +4144,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4176,22 +4181,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4208,6 +4218,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4216,6 +4227,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4224,6 +4236,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/Anet/A9/Configuration_adv.h

@@ -4144,22 +4144,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4176,22 +4181,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4208,6 +4218,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4216,6 +4227,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4224,6 +4236,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/Anet/E10/Configuration_adv.h

@@ -4144,22 +4144,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4176,22 +4181,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4208,6 +4218,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4216,6 +4227,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4224,6 +4236,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h

@@ -4144,22 +4144,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4176,22 +4181,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4208,6 +4218,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4216,6 +4227,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4224,6 +4236,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/Anet/E16/Stock/Configuration_adv.h

@@ -4144,22 +4144,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4176,22 +4181,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4208,6 +4218,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4216,6 +4227,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4224,6 +4236,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/Anet/ET4+/Configuration_adv.h

@@ -4144,22 +4144,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4176,22 +4181,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4208,6 +4218,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4216,6 +4227,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4224,6 +4236,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/Anet/ET4-Pro/Configuration_adv.h

@@ -4144,22 +4144,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4176,22 +4181,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4208,6 +4218,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4216,6 +4227,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4224,6 +4236,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/Anet/ET4/Configuration_adv.h

@@ -4144,22 +4144,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4176,22 +4181,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4208,6 +4218,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4216,6 +4227,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4224,6 +4236,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/Anet/ET4X/Configuration_adv.h

@@ -4144,22 +4144,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4176,22 +4181,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4208,6 +4218,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4216,6 +4227,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4224,6 +4236,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/Anet/ET5-Pro/Configuration_adv.h

@@ -4144,22 +4144,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4176,22 +4181,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4208,6 +4218,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4216,6 +4227,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4224,6 +4236,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/Anet/ET5/Configuration_adv.h

@@ -4144,22 +4144,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4176,22 +4181,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4208,6 +4218,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4216,6 +4227,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4224,6 +4236,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/Anet/ET5X/Configuration_adv.h

@@ -4144,22 +4144,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4176,22 +4181,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4208,6 +4218,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4216,6 +4227,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4224,6 +4236,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/AnyCubic/Chiron/Configuration_adv.h

@@ -4144,22 +4144,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4176,22 +4181,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4208,6 +4218,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4216,6 +4227,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4224,6 +4236,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h

@@ -4144,22 +4144,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4176,22 +4181,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4208,6 +4218,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4216,6 +4227,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4224,6 +4236,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h

@@ -4144,22 +4144,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4176,22 +4181,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4208,6 +4218,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4216,6 +4227,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4224,6 +4236,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h

@@ -4144,22 +4144,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4176,22 +4181,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4208,6 +4218,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4216,6 +4227,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4224,6 +4236,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/AnyCubic/Vyper/Configuration_adv.h

@@ -4144,22 +4144,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4176,22 +4181,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4208,6 +4218,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4216,6 +4227,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4224,6 +4236,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration_adv.h

@@ -4144,22 +4144,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4176,22 +4181,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4208,6 +4218,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4216,6 +4227,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4224,6 +4236,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration_adv.h

@@ -4144,22 +4144,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4176,22 +4181,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4208,6 +4218,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4216,6 +4227,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4224,6 +4236,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/AnyCubic/i3/Configuration_adv.h

@@ -4144,22 +4144,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4176,22 +4181,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4208,6 +4218,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4216,6 +4227,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4224,6 +4236,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/ArmEd/Configuration_adv.h

@@ -4149,22 +4149,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4181,22 +4186,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4213,6 +4223,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4221,6 +4232,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4229,6 +4241,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/Artillery/Genius Pro/Configuration_adv.h

@@ -4144,22 +4144,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4176,22 +4181,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4208,6 +4218,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4216,6 +4227,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4224,6 +4236,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/Artillery/Genius/BLTouch/Configuration_adv.h

@@ -4144,22 +4144,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4176,22 +4181,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4208,6 +4218,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4216,6 +4227,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4224,6 +4236,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/Artillery/Genius/V1/Configuration_adv.h

@@ -4144,22 +4144,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4176,22 +4181,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4208,6 +4218,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4216,6 +4227,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4224,6 +4236,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/Artillery/Hornet/Configuration_adv.h

@@ -4144,22 +4144,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4176,22 +4181,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4208,6 +4218,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4216,6 +4227,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4224,6 +4236,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h

@@ -4144,22 +4144,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4176,22 +4181,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4208,6 +4218,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4216,6 +4227,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4224,6 +4236,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h

@@ -4144,22 +4144,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4176,22 +4181,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4208,6 +4218,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4216,6 +4227,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4224,6 +4236,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/Artillery/Sidewinder X2/Configuration_adv.h

@@ -4144,22 +4144,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4176,22 +4181,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4208,6 +4218,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4216,6 +4227,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4224,6 +4236,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/Azteeg/X5GT/Configuration_adv.h

@@ -4144,22 +4144,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4176,22 +4181,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4208,6 +4218,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4216,6 +4227,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4224,6 +4236,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/BIBO/TouchX/cyclops/Configuration_adv.h

@@ -4144,22 +4144,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4176,22 +4181,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4208,6 +4218,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4216,6 +4227,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4224,6 +4236,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/BIBO/TouchX/default - BLTouch/Configuration_adv.h

@@ -4144,22 +4144,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4176,22 +4181,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4208,6 +4218,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4216,6 +4227,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4224,6 +4236,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/BIBO/TouchX/default/Configuration_adv.h

@@ -4141,22 +4141,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4173,22 +4178,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4205,6 +4215,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4213,6 +4224,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4221,6 +4233,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/BIQU/B1 SE Plus/Configuration_adv.h

@@ -4145,22 +4145,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4177,22 +4182,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4209,6 +4219,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4217,6 +4228,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4225,6 +4237,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/BIQU/B1 SE/Configuration_adv.h

@@ -4145,22 +4145,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4177,22 +4182,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4209,6 +4219,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4217,6 +4228,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4225,6 +4237,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/BIQU/B1/Configuration_adv.h

@@ -4147,22 +4147,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4179,22 +4184,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4211,6 +4221,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4219,6 +4230,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4227,6 +4239,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/BIQU/BX/all-metal-hotend/Configuration_adv.h

@@ -4147,22 +4147,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4179,22 +4184,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4211,6 +4221,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4219,6 +4230,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4227,6 +4239,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/BIQU/BX/base/Configuration_adv.h

@@ -4147,22 +4147,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4179,22 +4184,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4211,6 +4221,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4219,6 +4230,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4227,6 +4239,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/BIQU/Hurakan/Configuration_adv.h

@@ -4145,22 +4145,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4177,22 +4182,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4209,6 +4219,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4217,6 +4228,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4225,6 +4237,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/BIQU/Thunder Standard/Configuration_adv.h

@@ -4144,22 +4144,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4176,22 +4181,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4208,6 +4218,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4216,6 +4227,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4224,6 +4236,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/BQ/Hephestos/Configuration_adv.h

@@ -4144,22 +4144,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   #define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   #define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   #define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   #define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4176,22 +4181,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4208,6 +4218,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4216,6 +4227,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4224,6 +4236,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/BQ/Hephestos_2/Configuration_adv.h

@@ -4152,22 +4152,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   #define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   #define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   #define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   #define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4184,22 +4189,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4216,6 +4226,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4224,6 +4235,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4232,6 +4244,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/BQ/WITBOX/Configuration_adv.h

@@ -4144,22 +4144,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   #define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   #define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   #define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   #define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4176,22 +4181,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4208,6 +4218,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4216,6 +4227,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4224,6 +4236,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/CNC/miniRambo/Configuration_adv.h

@@ -4147,22 +4147,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4179,22 +4184,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4211,6 +4221,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4219,6 +4230,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4227,6 +4239,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/CTC/A13/Configuration_adv.h

@@ -4145,22 +4145,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4177,22 +4182,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4209,6 +4219,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4217,6 +4228,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4225,6 +4237,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/CTC/Bizer/Configuration_adv.h

@@ -4144,22 +4144,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4176,22 +4181,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4208,6 +4218,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4216,6 +4227,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4224,6 +4236,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/CTC/i3 2560 Rev A/no probe/Configuration_adv.h

@@ -4144,22 +4144,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4176,22 +4181,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4208,6 +4218,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4216,6 +4227,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4224,6 +4236,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/Cartesio/Configuration_adv.h

@@ -4144,22 +4144,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4176,22 +4181,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4208,6 +4218,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4216,6 +4227,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4224,6 +4236,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/Copymaster3D/300/Configuration_adv.h

@@ -4144,22 +4144,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4176,22 +4181,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4208,6 +4218,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4216,6 +4227,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4224,6 +4236,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/Copymaster3D/400/Configuration_adv.h

@@ -4144,22 +4144,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4176,22 +4181,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4208,6 +4218,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4216,6 +4227,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4224,6 +4236,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/Copymaster3D/500/Configuration_adv.h

@@ -4144,22 +4144,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4176,22 +4181,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4208,6 +4218,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4216,6 +4227,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4224,6 +4236,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/Creality/CR-10 Max/Configuration_adv.h

@@ -4145,22 +4145,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4177,22 +4182,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4209,6 +4219,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4217,6 +4228,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4225,6 +4237,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h

@@ -4144,22 +4144,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4176,22 +4181,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4208,6 +4218,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4216,6 +4227,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4224,6 +4236,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h

@@ -4144,22 +4144,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4176,22 +4181,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4208,6 +4218,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4216,6 +4227,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4224,6 +4236,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h

@@ -4144,22 +4144,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4176,22 +4181,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4208,6 +4218,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4216,6 +4227,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4224,6 +4236,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h

@@ -4142,22 +4142,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   #define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   #define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   #define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   #define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   #define MAIN_MENU_ITEM_5_DESC "Home & Info"
   #define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4174,22 +4179,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4206,6 +4216,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4214,6 +4225,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4222,6 +4234,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h

@@ -4144,22 +4144,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4176,22 +4181,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4208,6 +4218,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4216,6 +4227,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4224,6 +4236,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h

@@ -4144,22 +4144,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4176,22 +4181,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4208,6 +4218,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4216,6 +4227,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4224,6 +4236,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration_adv.h

@@ -4146,22 +4146,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4178,22 +4183,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4210,6 +4220,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4218,6 +4229,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4226,6 +4238,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h

@@ -4144,22 +4144,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4176,22 +4181,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4208,6 +4218,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4216,6 +4227,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4224,6 +4236,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/Creality/CR-10 S5/CrealityV2.2 - BLTouch/Configuration_adv.h

@@ -4144,22 +4144,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4176,22 +4181,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4208,6 +4218,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4216,6 +4227,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4224,6 +4236,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/Creality/CR-10 S5/CrealityV427 - BLTouch/Configuration_adv.h

@@ -4147,22 +4147,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4179,22 +4184,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4211,6 +4221,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4219,6 +4230,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4227,6 +4239,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/Creality/CR-10 V2/Configuration_adv.h

@@ -4150,22 +4150,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   #define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   #define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   #define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   #define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   #define MAIN_MENU_ITEM_5_DESC "Home & Info"
   #define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4182,22 +4187,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4214,6 +4224,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4222,6 +4233,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4230,6 +4242,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/Creality/CR-10 V3/BigTreeTech SKR Mini E3 v3/Configuration_adv.h

@@ -4152,22 +4152,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Park Nozzle"
   #define MAIN_MENU_ITEM_1_GCODE "G27"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   //#define MAIN_MENU_ITEM_2_DESC "" PREHEAT_1_LABEL
   //#define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4184,22 +4189,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4216,6 +4226,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4224,6 +4235,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4232,6 +4244,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/Creality/CR-10 V3/Stock/Configuration_adv.h

@@ -4152,22 +4152,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Park Nozzle"
   #define MAIN_MENU_ITEM_1_GCODE "G27"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   //#define MAIN_MENU_ITEM_2_DESC "" PREHEAT_1_LABEL
   //#define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4184,22 +4189,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4216,6 +4226,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4224,6 +4235,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4232,6 +4244,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h

@@ -4144,22 +4144,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4176,22 +4181,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4208,6 +4218,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4216,6 +4227,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4224,6 +4236,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h

@@ -4144,22 +4144,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4176,22 +4181,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4208,6 +4218,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4216,6 +4227,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4224,6 +4236,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h

@@ -4147,22 +4147,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4179,22 +4184,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4211,6 +4221,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4219,6 +4230,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4227,6 +4239,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/Creality/CR-10S Pro/Configuration_adv.h

@@ -4145,22 +4145,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4177,22 +4182,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4209,6 +4219,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4217,6 +4228,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4225,6 +4237,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h

@@ -4144,22 +4144,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4176,22 +4181,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4208,6 +4218,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4216,6 +4227,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4224,6 +4236,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration_adv.h

@@ -4144,22 +4144,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4176,22 +4181,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4208,6 +4218,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4216,6 +4227,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4224,6 +4236,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h

@@ -4144,22 +4144,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4176,22 +4181,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4208,6 +4218,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4216,6 +4227,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4224,6 +4236,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h

@@ -4144,22 +4144,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4176,22 +4181,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4208,6 +4218,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4216,6 +4227,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4224,6 +4236,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h

@@ -4144,22 +4144,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4176,22 +4181,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4208,6 +4218,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4216,6 +4227,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4224,6 +4236,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/Creality/CR-10S/CrealityV1 - BLTouch/Configuration_adv.h

@@ -4144,22 +4144,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4176,22 +4181,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4208,6 +4218,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4216,6 +4227,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4224,6 +4236,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h

@@ -4144,22 +4144,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4176,22 +4181,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4208,6 +4218,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4216,6 +4227,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4224,6 +4236,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/Creality/CR-20 Pro/Configuration_adv.h

@@ -4144,22 +4144,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4176,22 +4181,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4208,6 +4218,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4216,6 +4227,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4224,6 +4236,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration_adv.h

@@ -4144,22 +4144,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4176,22 +4181,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4208,6 +4218,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4216,6 +4227,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4224,6 +4236,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/Creality/CR-20/Stock/Configuration_adv.h

@@ -4144,22 +4144,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4176,22 +4181,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4208,6 +4218,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4216,6 +4227,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4224,6 +4236,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/Creality/CR-30 PrintMill/Configuration_adv.h

@@ -4144,22 +4144,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4176,22 +4181,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4208,6 +4218,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4216,6 +4227,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4224,6 +4236,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/Creality/CR-6 SE/Configuration_adv.h

@@ -4134,22 +4134,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4166,22 +4171,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4198,6 +4208,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4206,6 +4217,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4214,6 +4226,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/Creality/CR-8/Configuration_adv.h

@@ -4144,22 +4144,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4176,22 +4181,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4208,6 +4218,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4216,6 +4227,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4224,6 +4236,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/Creality/Ender-2 Pro/CrealityV24S4/Configuration_adv.h

@@ -4144,22 +4144,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4176,22 +4181,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4208,6 +4218,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4216,6 +4227,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4224,6 +4236,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration_adv.h

@@ -4145,22 +4145,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4177,22 +4182,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4209,6 +4219,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4217,6 +4228,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4225,6 +4237,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/Creality/Ender-2/Configuration_adv.h

@@ -4144,22 +4144,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4176,22 +4181,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4208,6 +4218,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4216,6 +4227,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4224,6 +4236,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/Creality/Ender-3 Max Neo/Configuration_adv.h

@@ -4144,22 +4144,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4176,22 +4181,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4208,6 +4218,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4216,6 +4227,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4224,6 +4236,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/Creality/Ender-3 Max/Configuration_adv.h

@@ -4145,22 +4145,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4177,22 +4182,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4209,6 +4219,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4217,6 +4228,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4225,6 +4237,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif
 

config/examples/Creality/Ender-3 Neo/Configuration_adv.h

@@ -4145,22 +4145,27 @@
   #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
   #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
   //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+  //#define MAIN_MENU_ITEM_1_IMMEDIATE        // Skip the queue and execute immediately. Rarely needed.
 
   #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
   #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_2_CONFIRM
+  //#define MAIN_MENU_ITEM_2_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
   //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
   //#define MAIN_MENU_ITEM_3_CONFIRM
+  //#define MAIN_MENU_ITEM_3_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
   //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
   //#define MAIN_MENU_ITEM_4_CONFIRM
+  //#define MAIN_MENU_ITEM_4_IMMEDIATE
 
   //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
   //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
   //#define MAIN_MENU_ITEM_5_CONFIRM
+  //#define MAIN_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom config menu
@@ -4177,22 +4182,27 @@
   #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
   #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
   //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+  //#define CONFIG_MENU_ITEM_1_IMMEDIATE      // Skip the queue and execute immediately. Rarely needed.
 
   #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
   #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
   //#define CONFIG_MENU_ITEM_2_CONFIRM
+  //#define CONFIG_MENU_ITEM_2_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
   //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
   //#define CONFIG_MENU_ITEM_3_CONFIRM
+  //#define CONFIG_MENU_ITEM_3_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_4_CONFIRM
+  //#define CONFIG_MENU_ITEM_4_IMMEDIATE
 
   //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
   //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
   //#define CONFIG_MENU_ITEM_5_CONFIRM
+  //#define CONFIG_MENU_ITEM_5_IMMEDIATE
 #endif
 
 // @section custom buttons
@@ -4209,6 +4219,7 @@
     #define BUTTON1_WHEN_PRINTING false     // Button allowed to trigger during printing?
     #define BUTTON1_GCODE         "G28"
     #define BUTTON1_DESC          "Homing"  // Optional string to set the LCD status
+    //#define BUTTON1_IMMEDIATE             // Skip the queue and execute immediately. Rarely needed.
   #endif
 
   //#define BUTTON2_PIN -1
@@ -4217,6 +4228,7 @@
     #define BUTTON2_WHEN_PRINTING false
     #define BUTTON2_GCODE         "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
     #define BUTTON2_DESC          "Preheat for " PREHEAT_1_LABEL
+    //#define BUTTON2_IMMEDIATE
   #endif
 
   //#define BUTTON3_PIN -1
@@ -4225,6 +4237,7 @@
     #define BUTTON3_WHEN_PRINTING false
     #define BUTTON3_GCODE         "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
     #define BUTTON3_DESC          "Preheat for " PREHEAT_2_LABEL
+    //#define BUTTON3_IMMEDIATE
   #endif
 #endif