3D-printing/Configurations
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Configurations.git synced 2025-08-09 06:45:27 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions

Fix, unify ET4 (#373)

Browse source
This commit is contained in:
Keith Bennett 2020-12-28 14:04:22 -08:00 • committed by Scott Lahteine
parent 613c2c4b81
commit 9262f619ac
24 changed files with 301 additions and 212 deletions
Download patch file Download diff file Expand all files Collapse all files

42
config/examples/Anet/ET4/Configuration_adv.h
View file

@ -874,7 +874,7 @@
* See https://hydraraptor.blogspot.com/2010/12/frequency-limit.html
* Use M201 F<freq> G<min%> to change limits at runtime.
*/
#define XY_FREQUENCY_LIMIT 10 // (Hz) Maximum frequency of small zigzag infill moves. Set with M201 F<hertz>.
#define XY_FREQUENCY_LIMIT 10 // (Hz) Maximum frequency of small zigzag infill moves. Set with M201 F<hertz>.
#ifdef XY_FREQUENCY_LIMIT
#define XY_FREQUENCY_MIN_PERCENT 5 // (percent) Minimum FR percentage to apply. Set with M201 G<min%>.
#endif
@ -1648,7 +1648,7 @@
#define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep
#define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep
#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
#if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING)
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
// Note: Extra time may be added to mitigate controller latency.
@ -1660,7 +1660,7 @@
//#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28
//#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping
#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping
#if ENABLED(BABYSTEP_ZPROBE_OFFSET)
//#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets
//#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
@ -1689,7 +1689,7 @@
//#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed
//#define LA_DEBUG // If enabled, this will generate debug information output over USB.
#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration
//#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration
#endif
// @section leveling
@ -2166,7 +2166,7 @@
//#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change.
//#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change
#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
#endif
@ -2534,22 +2534,22 @@
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/
#define CHOPPER_TIMING CHOPPER_DEFAULT_24V // All axes (override below)
//#define CHOPPER_TIMING_X CHOPPER_DEFAULT_12V // For X Axes (override below)
//#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
//#define CHOPPER_TIMING_Y CHOPPER_DEFAULT_12V // For Y Axes (override below)
//#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
//#define CHOPPER_TIMING_Z CHOPPER_DEFAULT_12V // For Z Axes (override below)
//#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
//#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
//#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
//#define CHOPPER_TIMING_E CHOPPER_DEFAULT_12V // For Extruders (override below)
//#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
//#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
//#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
//#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
//#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
//#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
//#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
//#define CHOPPER_TIMING_X CHOPPER_DEFAULT_24V // For X Axes (override below)
//#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_24V
//#define CHOPPER_TIMING_Y CHOPPER_DEFAULT_24V // For Y Axes (override below)
//#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_24V
//#define CHOPPER_TIMING_Z CHOPPER_DEFAULT_24V // For Z Axes (override below)
//#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_24V
//#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_24V
//#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_24V
//#define CHOPPER_TIMING_E CHOPPER_DEFAULT_24V // For Extruders (override below)
//#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_24V
//#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_24V
//#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_24V
//#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_24V
//#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_24V
//#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_24V
//#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_24V
/**
* Monitor Trinamic drivers