diff --git a/config/default/Configuration.h b/config/default/Configuration.h index 164cc23dfd..64950c9631 100644 --- a/config/default/Configuration.h +++ b/config/default/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset @@ -3362,7 +3362,7 @@ //#define TFT_SHARED_IO // I/O is shared between TFT display and other devices. Disable async data transfer. - #define COMPACT_MARLIN_BOOT_LOGO // Use compressed data to save Flash space. + #define COMPACT_MARLIN_BOOT_LOGO // Use compressed data to save Flash space #endif #if ENABLED(TFT_LVGL_UI) diff --git a/config/examples/3DFabXYZ/Migbot/Configuration.h b/config/examples/3DFabXYZ/Migbot/Configuration.h index 21586f6b02..e812297fc8 100644 --- a/config/examples/3DFabXYZ/Migbot/Configuration.h +++ b/config/examples/3DFabXYZ/Migbot/Configuration.h @@ -1533,7 +1533,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/ADIMLab/Gantry v1/Configuration.h b/config/examples/ADIMLab/Gantry v1/Configuration.h index 1a16bb0798..4f181cea4b 100644 --- a/config/examples/ADIMLab/Gantry v1/Configuration.h +++ b/config/examples/ADIMLab/Gantry v1/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/ADIMLab/Gantry v2/Configuration.h b/config/examples/ADIMLab/Gantry v2/Configuration.h index a74fb3a976..4f2cbb62a1 100644 --- a/config/examples/ADIMLab/Gantry v2/Configuration.h +++ b/config/examples/ADIMLab/Gantry v2/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Alfawise/U20-bltouch/Configuration.h b/config/examples/Alfawise/U20-bltouch/Configuration.h index 4f0da66dbb..9f56412758 100644 --- a/config/examples/Alfawise/U20-bltouch/Configuration.h +++ b/config/examples/Alfawise/U20-bltouch/Configuration.h @@ -1600,7 +1600,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Alfawise/U20/Configuration.h b/config/examples/Alfawise/U20/Configuration.h index 8a606ab049..3434595bb5 100644 --- a/config/examples/Alfawise/U20/Configuration.h +++ b/config/examples/Alfawise/U20/Configuration.h @@ -1601,7 +1601,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/AliExpress/CL-260/Configuration.h b/config/examples/AliExpress/CL-260/Configuration.h index fbd153c103..a625d8b51a 100644 --- a/config/examples/AliExpress/CL-260/Configuration.h +++ b/config/examples/AliExpress/CL-260/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/AliExpress/UM2pExt/Configuration.h b/config/examples/AliExpress/UM2pExt/Configuration.h index f4540d538e..5225491260 100644 --- a/config/examples/AliExpress/UM2pExt/Configuration.h +++ b/config/examples/AliExpress/UM2pExt/Configuration.h @@ -1532,7 +1532,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Anet/A2/Configuration.h b/config/examples/Anet/A2/Configuration.h index 85ad9b4671..11a7e80198 100644 --- a/config/examples/Anet/A2/Configuration.h +++ b/config/examples/Anet/A2/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Anet/A2plus/Configuration.h b/config/examples/Anet/A2plus/Configuration.h index cbafe7bc8a..715f460776 100644 --- a/config/examples/Anet/A2plus/Configuration.h +++ b/config/examples/Anet/A2plus/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Anet/A6/Configuration.h b/config/examples/Anet/A6/Configuration.h index 48e638a200..07d7c4e28e 100644 --- a/config/examples/Anet/A6/Configuration.h +++ b/config/examples/Anet/A6/Configuration.h @@ -1548,7 +1548,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Anet/A8/Configuration.h b/config/examples/Anet/A8/Configuration.h index 4d6ee9a1f6..0c41295618 100644 --- a/config/examples/Anet/A8/Configuration.h +++ b/config/examples/Anet/A8/Configuration.h @@ -1534,7 +1534,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Anet/A8plus/Configuration.h b/config/examples/Anet/A8plus/Configuration.h index e5c6d95373..6b393922e4 100644 --- a/config/examples/Anet/A8plus/Configuration.h +++ b/config/examples/Anet/A8plus/Configuration.h @@ -1533,7 +1533,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Anet/A9/Configuration.h b/config/examples/Anet/A9/Configuration.h index 8675724213..461004fcbb 100644 --- a/config/examples/Anet/A9/Configuration.h +++ b/config/examples/Anet/A9/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Anet/E10/Configuration.h b/config/examples/Anet/E10/Configuration.h index bfb1c27929..a0a0397ff0 100644 --- a/config/examples/Anet/E10/Configuration.h +++ b/config/examples/Anet/E10/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h b/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h index 5295d03fc1..e3ac1bb3db 100644 --- a/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h +++ b/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h @@ -1533,7 +1533,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Anet/E16/Stock/Configuration.h b/config/examples/Anet/E16/Stock/Configuration.h index 01037add91..f0b3250091 100644 --- a/config/examples/Anet/E16/Stock/Configuration.h +++ b/config/examples/Anet/E16/Stock/Configuration.h @@ -1533,7 +1533,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Anet/ET4+/Configuration.h b/config/examples/Anet/ET4+/Configuration.h index 1d1142a6ce..19432e7b77 100644 --- a/config/examples/Anet/ET4+/Configuration.h +++ b/config/examples/Anet/ET4+/Configuration.h @@ -1537,7 +1537,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Anet/ET4-Pro/Configuration.h b/config/examples/Anet/ET4-Pro/Configuration.h index e47a819535..09ce0c29e2 100644 --- a/config/examples/Anet/ET4-Pro/Configuration.h +++ b/config/examples/Anet/ET4-Pro/Configuration.h @@ -1537,7 +1537,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Anet/ET4/Configuration.h b/config/examples/Anet/ET4/Configuration.h index 09f3efce33..d032cb5a86 100644 --- a/config/examples/Anet/ET4/Configuration.h +++ b/config/examples/Anet/ET4/Configuration.h @@ -1537,7 +1537,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Anet/ET4X/Configuration.h b/config/examples/Anet/ET4X/Configuration.h index ce84feac83..6bd6103802 100644 --- a/config/examples/Anet/ET4X/Configuration.h +++ b/config/examples/Anet/ET4X/Configuration.h @@ -1537,7 +1537,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Anet/ET5-Pro/Configuration.h b/config/examples/Anet/ET5-Pro/Configuration.h index 06a8031ba4..6239246d46 100644 --- a/config/examples/Anet/ET5-Pro/Configuration.h +++ b/config/examples/Anet/ET5-Pro/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Anet/ET5/Configuration.h b/config/examples/Anet/ET5/Configuration.h index df6cab8c77..bce9ae2656 100644 --- a/config/examples/Anet/ET5/Configuration.h +++ b/config/examples/Anet/ET5/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Anet/ET5X/Configuration.h b/config/examples/Anet/ET5X/Configuration.h index 27636e7c75..ec7526bf3a 100644 --- a/config/examples/Anet/ET5X/Configuration.h +++ b/config/examples/Anet/ET5X/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/AnyCubic/Chiron/Configuration.h b/config/examples/AnyCubic/Chiron/Configuration.h index 3add4ef0cd..47a45119d6 100644 --- a/config/examples/AnyCubic/Chiron/Configuration.h +++ b/config/examples/AnyCubic/Chiron/Configuration.h @@ -1534,7 +1534,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h index e0635fa6fc..0529a76bc9 100644 --- a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h +++ b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h @@ -1532,7 +1532,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h index a369d6275d..424ab4fbed 100644 --- a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h +++ b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h @@ -1532,7 +1532,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h index 2303571622..bcf1a47f42 100644 --- a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h +++ b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/AnyCubic/Vyper/Configuration.h b/config/examples/AnyCubic/Vyper/Configuration.h index 24ae20f4a9..3fe607b673 100644 --- a/config/examples/AnyCubic/Vyper/Configuration.h +++ b/config/examples/AnyCubic/Vyper/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration.h b/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration.h index 55051feda0..8edaa9f7b7 100644 --- a/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration.h +++ b/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration.h @@ -1580,7 +1580,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration.h b/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration.h index 3bc9be0529..702d1e5b4e 100644 --- a/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration.h +++ b/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration.h @@ -1545,7 +1545,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/AnyCubic/i3/Configuration.h b/config/examples/AnyCubic/i3/Configuration.h index 658ca8449f..38d4fafa0a 100644 --- a/config/examples/AnyCubic/i3/Configuration.h +++ b/config/examples/AnyCubic/i3/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/ArmEd/Configuration.h b/config/examples/ArmEd/Configuration.h index 33afdf1789..ac81e527f7 100644 --- a/config/examples/ArmEd/Configuration.h +++ b/config/examples/ArmEd/Configuration.h @@ -1532,7 +1532,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Artillery/Genius Pro/Configuration.h b/config/examples/Artillery/Genius Pro/Configuration.h index 053b34a421..648554cf88 100644 --- a/config/examples/Artillery/Genius Pro/Configuration.h +++ b/config/examples/Artillery/Genius Pro/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Artillery/Genius/BLTouch/Configuration.h b/config/examples/Artillery/Genius/BLTouch/Configuration.h index 1d4a2ba573..d492275140 100644 --- a/config/examples/Artillery/Genius/BLTouch/Configuration.h +++ b/config/examples/Artillery/Genius/BLTouch/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Artillery/Genius/V1/Configuration.h b/config/examples/Artillery/Genius/V1/Configuration.h index 3a7ef41cce..b5f83331eb 100644 --- a/config/examples/Artillery/Genius/V1/Configuration.h +++ b/config/examples/Artillery/Genius/V1/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Artillery/Hornet/Configuration.h b/config/examples/Artillery/Hornet/Configuration.h index f204c1617d..c1dc33e98f 100644 --- a/config/examples/Artillery/Hornet/Configuration.h +++ b/config/examples/Artillery/Hornet/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration.h b/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration.h index 4babbab832..c2e6e61c65 100644 --- a/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration.h +++ b/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration.h @@ -1547,7 +1547,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Artillery/Sidewinder X1/V1/Configuration.h b/config/examples/Artillery/Sidewinder X1/V1/Configuration.h index fa8f435028..b00a3cfe91 100644 --- a/config/examples/Artillery/Sidewinder X1/V1/Configuration.h +++ b/config/examples/Artillery/Sidewinder X1/V1/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Artillery/Sidewinder X2/Configuration.h b/config/examples/Artillery/Sidewinder X2/Configuration.h index bce041a672..d4485b9372 100644 --- a/config/examples/Artillery/Sidewinder X2/Configuration.h +++ b/config/examples/Artillery/Sidewinder X2/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Azteeg/X5GT/Configuration.h b/config/examples/Azteeg/X5GT/Configuration.h index 7ad89fdccd..1edc19392b 100644 --- a/config/examples/Azteeg/X5GT/Configuration.h +++ b/config/examples/Azteeg/X5GT/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration.h b/config/examples/BIBO/TouchX/cyclops/Configuration.h index f138b14cb3..6b575f1063 100644 --- a/config/examples/BIBO/TouchX/cyclops/Configuration.h +++ b/config/examples/BIBO/TouchX/cyclops/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/BIBO/TouchX/default/Configuration.h b/config/examples/BIBO/TouchX/default/Configuration.h index 6dccdc361b..6487e17ae0 100644 --- a/config/examples/BIBO/TouchX/default/Configuration.h +++ b/config/examples/BIBO/TouchX/default/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/BIQU/B1 SE Plus/Configuration.h b/config/examples/BIQU/B1 SE Plus/Configuration.h index 84f58c54c0..55bbb43d06 100644 --- a/config/examples/BIQU/B1 SE Plus/Configuration.h +++ b/config/examples/BIQU/B1 SE Plus/Configuration.h @@ -1529,7 +1529,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/BIQU/B1 SE/Configuration.h b/config/examples/BIQU/B1 SE/Configuration.h index 6d94ab896e..6aa3e95c93 100644 --- a/config/examples/BIQU/B1 SE/Configuration.h +++ b/config/examples/BIQU/B1 SE/Configuration.h @@ -1529,7 +1529,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/BIQU/B1/Configuration.h b/config/examples/BIQU/B1/Configuration.h index 627280bb41..f663323683 100644 --- a/config/examples/BIQU/B1/Configuration.h +++ b/config/examples/BIQU/B1/Configuration.h @@ -1540,7 +1540,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/BIQU/BX/Configuration.h b/config/examples/BIQU/BX/Configuration.h index 89152f0414..acac02e5aa 100644 --- a/config/examples/BIQU/BX/Configuration.h +++ b/config/examples/BIQU/BX/Configuration.h @@ -1538,7 +1538,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/BIQU/Hurakan/Configuration.h b/config/examples/BIQU/Hurakan/Configuration.h index 4eabdaceb3..0262c00829 100644 --- a/config/examples/BIQU/Hurakan/Configuration.h +++ b/config/examples/BIQU/Hurakan/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/BIQU/Thunder Standard/Configuration.h b/config/examples/BIQU/Thunder Standard/Configuration.h index 9f60ebfb27..8126152976 100644 --- a/config/examples/BIQU/Thunder Standard/Configuration.h +++ b/config/examples/BIQU/Thunder Standard/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/BQ/Hephestos/Configuration.h b/config/examples/BQ/Hephestos/Configuration.h index 110bb1f671..13ddf153b2 100644 --- a/config/examples/BQ/Hephestos/Configuration.h +++ b/config/examples/BQ/Hephestos/Configuration.h @@ -1532,7 +1532,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/BQ/Hephestos_2/Configuration.h b/config/examples/BQ/Hephestos_2/Configuration.h index a86b87f4d4..ebdcad2c40 100644 --- a/config/examples/BQ/Hephestos_2/Configuration.h +++ b/config/examples/BQ/Hephestos_2/Configuration.h @@ -1545,7 +1545,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/BQ/WITBOX/Configuration.h b/config/examples/BQ/WITBOX/Configuration.h index 2e8d7427f6..f23f7fd3af 100644 --- a/config/examples/BQ/WITBOX/Configuration.h +++ b/config/examples/BQ/WITBOX/Configuration.h @@ -1532,7 +1532,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/CTC/A13/Configuration.h b/config/examples/CTC/A13/Configuration.h index 31f43ef16e..94ad21f28c 100644 --- a/config/examples/CTC/A13/Configuration.h +++ b/config/examples/CTC/A13/Configuration.h @@ -1532,7 +1532,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/CTC/Bizer/Configuration.h b/config/examples/CTC/Bizer/Configuration.h index b40a1b451c..5ef2a5d95c 100644 --- a/config/examples/CTC/Bizer/Configuration.h +++ b/config/examples/CTC/Bizer/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h b/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h index 7c7c718e55..9522ff536f 100644 --- a/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h +++ b/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h @@ -1532,7 +1532,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Cartesio/Configuration.h b/config/examples/Cartesio/Configuration.h index d175c451c6..9e6e8f05a6 100644 --- a/config/examples/Cartesio/Configuration.h +++ b/config/examples/Cartesio/Configuration.h @@ -1547,7 +1547,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Copymaster3D/300/Configuration.h b/config/examples/Copymaster3D/300/Configuration.h index 81f85ec0c1..fa9f013d88 100644 --- a/config/examples/Copymaster3D/300/Configuration.h +++ b/config/examples/Copymaster3D/300/Configuration.h @@ -1532,7 +1532,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Copymaster3D/400/Configuration.h b/config/examples/Copymaster3D/400/Configuration.h index a5318c8520..76425d1fba 100644 --- a/config/examples/Copymaster3D/400/Configuration.h +++ b/config/examples/Copymaster3D/400/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Copymaster3D/500/Configuration.h b/config/examples/Copymaster3D/500/Configuration.h index 62e3037d6c..9a8273f529 100644 --- a/config/examples/Copymaster3D/500/Configuration.h +++ b/config/examples/Copymaster3D/500/Configuration.h @@ -1532,7 +1532,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration.h index fb4b7d519b..5441eababd 100644 --- a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -1539,7 +1539,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h index 33e9c184eb..6948b2d365 100644 --- a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h @@ -1540,7 +1540,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h index a8537412c5..7c2105d674 100644 --- a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h +++ b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h index dfdb8d4bba..565995a226 100644 --- a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h @@ -1532,7 +1532,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration.h b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration.h index 3374858db1..bf8dfc7602 100644 --- a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration.h +++ b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration.h @@ -1532,7 +1532,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration.h b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration.h index 514e888563..22eb20d0da 100644 --- a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration.h +++ b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h index 602a5d0b24..498c49c86d 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h @@ -1532,7 +1532,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration.h b/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration.h index 8ece7d9dca..91d6968658 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration.h +++ b/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration.h @@ -1533,7 +1533,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Creality/CR-10 V2/Configuration.h b/config/examples/Creality/CR-10 V2/Configuration.h index 881554edcd..ab80379651 100644 --- a/config/examples/Creality/CR-10 V2/Configuration.h +++ b/config/examples/Creality/CR-10 V2/Configuration.h @@ -1549,7 +1549,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Creality/CR-10 V3/Configuration.h b/config/examples/Creality/CR-10 V3/Configuration.h index 1e6750a884..f327cfada4 100644 --- a/config/examples/Creality/CR-10 V3/Configuration.h +++ b/config/examples/Creality/CR-10 V3/Configuration.h @@ -1550,7 +1550,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h index 5f3221dbec..db0ded68d5 100644 --- a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -1530,7 +1530,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 3.0/Configuration.h b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 3.0/Configuration.h index c95c77fd4c..67ac93da3b 100644 --- a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 3.0/Configuration.h +++ b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 3.0/Configuration.h @@ -1530,7 +1530,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Creality/CR-10/CrealityV1/Configuration.h b/config/examples/Creality/CR-10/CrealityV1/Configuration.h index bd220f197f..74a979e84d 100644 --- a/config/examples/Creality/CR-10/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10/CrealityV1/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h index 7f029a455f..37e7aa8046 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration.h b/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration.h index 15a1338a6a..14d0875169 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h index 3f50a2b49d..4b747ed83e 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -1532,7 +1532,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration.h index 691b04d92c..7a697f257e 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Creality/CR-10S/CrealityV1/Configuration.h b/config/examples/Creality/CR-10S/CrealityV1/Configuration.h index c9a2a8c7d2..63121892f5 100644 --- a/config/examples/Creality/CR-10S/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10S/CrealityV1/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Creality/CR-20 Pro/Configuration.h b/config/examples/Creality/CR-20 Pro/Configuration.h index 54537db1bd..c4a77979a3 100644 --- a/config/examples/Creality/CR-20 Pro/Configuration.h +++ b/config/examples/Creality/CR-20 Pro/Configuration.h @@ -1532,7 +1532,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration.h b/config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration.h index 2a55e7509c..ce9bb330a4 100644 --- a/config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration.h +++ b/config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration.h @@ -1532,7 +1532,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Creality/CR-20/Stock/Configuration.h b/config/examples/Creality/CR-20/Stock/Configuration.h index d9755e3823..95836dfed5 100644 --- a/config/examples/Creality/CR-20/Stock/Configuration.h +++ b/config/examples/Creality/CR-20/Stock/Configuration.h @@ -1532,7 +1532,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Creality/CR-30 PrintMill/Configuration.h b/config/examples/Creality/CR-30 PrintMill/Configuration.h index 9720e25abc..f4d51c424f 100644 --- a/config/examples/Creality/CR-30 PrintMill/Configuration.h +++ b/config/examples/Creality/CR-30 PrintMill/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Creality/CR-6 SE/Configuration.h b/config/examples/Creality/CR-6 SE/Configuration.h index d070eb7ee5..2eb716403d 100644 --- a/config/examples/Creality/CR-6 SE/Configuration.h +++ b/config/examples/Creality/CR-6 SE/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Creality/CR-8/Configuration.h b/config/examples/Creality/CR-8/Configuration.h index 44c450deb3..9cd1b531cd 100644 --- a/config/examples/Creality/CR-8/Configuration.h +++ b/config/examples/Creality/CR-8/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration.h b/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration.h index 58fcf6fdfe..18c38cb0cc 100644 --- a/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration.h +++ b/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Creality/Ender-2/Configuration.h b/config/examples/Creality/Ender-2/Configuration.h index 9242a391ea..3bb3d5f5c6 100644 --- a/config/examples/Creality/Ender-2/Configuration.h +++ b/config/examples/Creality/Ender-2/Configuration.h @@ -1532,7 +1532,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Creality/Ender-3 Max/Configuration.h b/config/examples/Creality/Ender-3 Max/Configuration.h index 81dbb95cc4..55970ff9ee 100644 --- a/config/examples/Creality/Ender-3 Max/Configuration.h +++ b/config/examples/Creality/Ender-3 Max/Configuration.h @@ -1535,7 +1535,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Creality/Ender-3 Neo/Configuration.h b/config/examples/Creality/Ender-3 Neo/Configuration.h index b4fb3d46a0..a6ad6b8df3 100644 --- a/config/examples/Creality/Ender-3 Neo/Configuration.h +++ b/config/examples/Creality/Ender-3 Neo/Configuration.h @@ -1532,7 +1532,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration.h index e7c7f3be09..979fb89fbe 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h index 2e787e2c3c..8da31a8b9e 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h index a9a466e3a5..14a374e07b 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h index 371b9040f7..5ffa4a807d 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration.h index 1fb9176872..3ea3be72d9 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration.h @@ -1530,7 +1530,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h index 82726d56b9..d187f495b9 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h @@ -1532,7 +1532,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h index ae824094a5..0e586f847d 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h index 2daae386a5..b673537557 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h @@ -1532,7 +1532,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Creality/Ender-3 S1 Plus/Configuration.h b/config/examples/Creality/Ender-3 S1 Plus/Configuration.h index 343ef066ec..9b67d9036a 100644 --- a/config/examples/Creality/Ender-3 S1 Plus/Configuration.h +++ b/config/examples/Creality/Ender-3 S1 Plus/Configuration.h @@ -1532,7 +1532,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Creality/Ender-3 S1 Pro/Configuration.h b/config/examples/Creality/Ender-3 S1 Pro/Configuration.h index d7def93588..8a3361a49f 100644 --- a/config/examples/Creality/Ender-3 S1 Pro/Configuration.h +++ b/config/examples/Creality/Ender-3 S1 Pro/Configuration.h @@ -1532,7 +1532,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Creality/Ender-3 S1/STM32F1/Configuration.h b/config/examples/Creality/Ender-3 S1/STM32F1/Configuration.h index 8370e49504..14fe2a8178 100644 --- a/config/examples/Creality/Ender-3 S1/STM32F1/Configuration.h +++ b/config/examples/Creality/Ender-3 S1/STM32F1/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Creality/Ender-3 S1/STM32F4/Configuration.h b/config/examples/Creality/Ender-3 S1/STM32F4/Configuration.h index 6ac36a4274..f6b19483e2 100644 --- a/config/examples/Creality/Ender-3 S1/STM32F4/Configuration.h +++ b/config/examples/Creality/Ender-3 S1/STM32F4/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Creality/Ender-3 V2 Neo/Configuration.h b/config/examples/Creality/Ender-3 V2 Neo/Configuration.h index debd75281f..2ece85e1c0 100644 --- a/config/examples/Creality/Ender-3 V2 Neo/Configuration.h +++ b/config/examples/Creality/Ender-3 V2 Neo/Configuration.h @@ -1532,7 +1532,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration.h index 46c82b93f9..0e01165737 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration.h index 925d9b748b..b9f0abf1d2 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration.h index 910e5efade..c3667e483e 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration.h index 4b19f07354..dd581a2a67 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration.h b/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration.h index 679ddb3ddc..be991a38cf 100644 --- a/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration.h b/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration.h index 714df45e9f..ded5d3371d 100644 --- a/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration.h index f434879490..625fa9b34a 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration.h @@ -1530,7 +1530,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Creality/Ender-3/BigTreeTech Manta E3 EZ/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech Manta E3 EZ/Configuration.h index bea52db31e..4e2b693f57 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech Manta E3 EZ/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech Manta E3 EZ/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration.h index 62be432a96..7efc58abff 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration.h @@ -1532,7 +1532,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h index dc2643cd68..a3eec7ee45 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h @@ -1530,7 +1530,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h index 99dbb71608..46a8a47be8 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h @@ -1530,7 +1530,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h index e342a2431d..a3e9aa5679 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h @@ -1530,7 +1530,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h index dd3fe53e57..24de5a38f4 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h index 6f67a4acec..13b4d8da2a 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h @@ -1530,7 +1530,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h index d68e4e956b..75b0dbaf87 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h @@ -1530,7 +1530,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h index b3fdb0b433..686f3442a0 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -1530,7 +1530,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration.h index 87ef9d87a2..3e85a582f9 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration.h @@ -1530,7 +1530,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Creality/Ender-3/CrealityV1/Configuration.h b/config/examples/Creality/Ender-3/CrealityV1/Configuration.h index a5e13258b8..bffd6a02a2 100644 --- a/config/examples/Creality/Ender-3/CrealityV1/Configuration.h +++ b/config/examples/Creality/Ender-3/CrealityV1/Configuration.h @@ -1532,7 +1532,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Creality/Ender-3/CrealityV422/Configuration.h b/config/examples/Creality/Ender-3/CrealityV422/Configuration.h index f62f84b522..dc45634533 100644 --- a/config/examples/Creality/Ender-3/CrealityV422/Configuration.h +++ b/config/examples/Creality/Ender-3/CrealityV422/Configuration.h @@ -1538,7 +1538,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Creality/Ender-3/CrealityV427/Configuration.h b/config/examples/Creality/Ender-3/CrealityV427/Configuration.h index b6471b95f7..6fd1a4d150 100644 --- a/config/examples/Creality/Ender-3/CrealityV427/Configuration.h +++ b/config/examples/Creality/Ender-3/CrealityV427/Configuration.h @@ -1532,7 +1532,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h index aab9596f60..7d1e970407 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h @@ -1532,7 +1532,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h index 6e014ea17f..115c605d52 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h @@ -1532,7 +1532,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration.h index b343492884..5cda8ea212 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration.h @@ -1532,7 +1532,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h index 8457572703..52ec32d557 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h @@ -1532,7 +1532,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h index 45b30ad690..839e1e658f 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h @@ -1532,7 +1532,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h index b65dbbac3d..e5dfc4643a 100644 --- a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h +++ b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h @@ -1537,7 +1537,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration.h b/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration.h index 1c70eacc3e..c0643f540e 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration.h @@ -1530,7 +1530,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration.h b/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration.h index 35c8ef8618..fa2632bd06 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration.h @@ -1530,7 +1530,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration.h b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration.h index 64923506e7..115fbcee3f 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration.h @@ -1532,7 +1532,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration.h b/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration.h index b1e34aa602..12e89f0a50 100644 --- a/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration.h +++ b/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration.h @@ -1532,7 +1532,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Creality/Ender-4/Configuration.h b/config/examples/Creality/Ender-4/Configuration.h index b4309ac7c4..ade567b88a 100644 --- a/config/examples/Creality/Ender-4/Configuration.h +++ b/config/examples/Creality/Ender-4/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Creality/Ender-5 Plus/BigTreeTech SKR 3/Configuration.h b/config/examples/Creality/Ender-5 Plus/BigTreeTech SKR 3/Configuration.h index cc4af2bccb..4a4b24d1f2 100644 --- a/config/examples/Creality/Ender-5 Plus/BigTreeTech SKR 3/Configuration.h +++ b/config/examples/Creality/Ender-5 Plus/BigTreeTech SKR 3/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Creality/Ender-5 Plus/CrealityV1/Configuration.h b/config/examples/Creality/Ender-5 Plus/CrealityV1/Configuration.h index fa9ec41093..b50f1cc7ab 100644 --- a/config/examples/Creality/Ender-5 Plus/CrealityV1/Configuration.h +++ b/config/examples/Creality/Ender-5 Plus/CrealityV1/Configuration.h @@ -1540,7 +1540,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration.h index bd8c64b189..25986d5bc3 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration.h @@ -1539,7 +1539,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h index 1f29c3f3aa..911f4603e7 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h @@ -1530,7 +1530,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration.h index a9a4ba2aba..abb63ef482 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration.h @@ -1532,7 +1532,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 3.0 with BLTouch-HighTemp/Configuration.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 3.0 with BLTouch-HighTemp/Configuration.h index 4af266f8bc..c98ae56350 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 3.0 with BLTouch-HighTemp/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 3.0 with BLTouch-HighTemp/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration.h b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration.h index c3c34e8467..d6a808eaf2 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration.h @@ -1532,7 +1532,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration.h b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration.h index 2f70c4d138..bfe6cd5815 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration.h @@ -1545,7 +1545,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h index b7a6f1f8fd..a0e1ccddea 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h @@ -1532,7 +1532,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Creality/Ender-5 S1/Configuration.h b/config/examples/Creality/Ender-5 S1/Configuration.h index 80f9a9a7ed..4187a70070 100644 --- a/config/examples/Creality/Ender-5 S1/Configuration.h +++ b/config/examples/Creality/Ender-5 S1/Configuration.h @@ -1563,7 +1563,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h index 525c8be05d..80ab4300cd 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h @@ -1532,7 +1532,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration.h index 0d29098d19..089e709eef 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration.h @@ -1532,7 +1532,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration.h index efb8c82d99..bdfb07c8c7 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration.h @@ -1530,7 +1530,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h index 435d8cff1b..ae30ac03b8 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -1530,7 +1530,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 3.0 with BLTouch/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 3.0 with BLTouch/Configuration.h index 5b24fc9eab..6f1e279c38 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 3.0 with BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 3.0 with BLTouch/Configuration.h @@ -1533,7 +1533,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Creality/Ender-5/CrealityV1/Configuration.h b/config/examples/Creality/Ender-5/CrealityV1/Configuration.h index 2141411a76..cf7a6a2281 100644 --- a/config/examples/Creality/Ender-5/CrealityV1/Configuration.h +++ b/config/examples/Creality/Ender-5/CrealityV1/Configuration.h @@ -1532,7 +1532,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Creality/Ender-5/CrealityV427/Configuration.h b/config/examples/Creality/Ender-5/CrealityV427/Configuration.h index ff0fa39d76..93bf069e23 100644 --- a/config/examples/Creality/Ender-5/CrealityV427/Configuration.h +++ b/config/examples/Creality/Ender-5/CrealityV427/Configuration.h @@ -1532,7 +1532,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Creality/Ender-6/Configuration.h b/config/examples/Creality/Ender-6/Configuration.h index f20e322700..1b11074783 100644 --- a/config/examples/Creality/Ender-6/Configuration.h +++ b/config/examples/Creality/Ender-6/Configuration.h @@ -1538,7 +1538,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration.h b/config/examples/Dagoma/Disco Ultimate/Configuration.h index c011168163..29b29fe402 100644 --- a/config/examples/Dagoma/Disco Ultimate/Configuration.h +++ b/config/examples/Dagoma/Disco Ultimate/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Daycom/3DP-100/Configuration.h b/config/examples/Daycom/3DP-100/Configuration.h index 48f54ae5ac..a8ff0ddd56 100644 --- a/config/examples/Daycom/3DP-100/Configuration.h +++ b/config/examples/Daycom/3DP-100/Configuration.h @@ -1535,7 +1535,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/EXP3D/Imprimante multifonction/Configuration.h b/config/examples/EXP3D/Imprimante multifonction/Configuration.h index ce713cc2ef..1d3d99b487 100644 --- a/config/examples/EXP3D/Imprimante multifonction/Configuration.h +++ b/config/examples/EXP3D/Imprimante multifonction/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/EasyThreeD/ET4000PLUS/Configuration.h b/config/examples/EasyThreeD/ET4000PLUS/Configuration.h index 5e3e3d1452..18b4ae5c1e 100644 --- a/config/examples/EasyThreeD/ET4000PLUS/Configuration.h +++ b/config/examples/EasyThreeD/ET4000PLUS/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Einstart-S/Configuration.h b/config/examples/Einstart-S/Configuration.h index d0363c3581..c26fc947a4 100644 --- a/config/examples/Einstart-S/Configuration.h +++ b/config/examples/Einstart-S/Configuration.h @@ -1536,7 +1536,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Elegoo/Neptune 2/Configuration.h b/config/examples/Elegoo/Neptune 2/Configuration.h index b2bba27041..c902fc8810 100644 --- a/config/examples/Elegoo/Neptune 2/Configuration.h +++ b/config/examples/Elegoo/Neptune 2/Configuration.h @@ -1587,7 +1587,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Eryone/Thinker SE/Configuration.h b/config/examples/Eryone/Thinker SE/Configuration.h index ffa52bb1ef..243a89675f 100644 --- a/config/examples/Eryone/Thinker SE/Configuration.h +++ b/config/examples/Eryone/Thinker SE/Configuration.h @@ -1553,7 +1553,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Eryone/Thinker V2/Configuration.h b/config/examples/Eryone/Thinker V2/Configuration.h index bd1dc8f23e..074d5d04a3 100644 --- a/config/examples/Eryone/Thinker V2/Configuration.h +++ b/config/examples/Eryone/Thinker V2/Configuration.h @@ -1555,7 +1555,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/FYSETC/AIO_II/Configuration.h b/config/examples/FYSETC/AIO_II/Configuration.h index 5ac73e7d5d..6078fc96d3 100644 --- a/config/examples/FYSETC/AIO_II/Configuration.h +++ b/config/examples/FYSETC/AIO_II/Configuration.h @@ -1532,7 +1532,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/FYSETC/F6_13/Configuration.h b/config/examples/FYSETC/F6_13/Configuration.h index 059242eed0..286c1d4aff 100644 --- a/config/examples/FYSETC/F6_13/Configuration.h +++ b/config/examples/FYSETC/F6_13/Configuration.h @@ -1533,7 +1533,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/FYSETC/S6/Configuration.h b/config/examples/FYSETC/S6/Configuration.h index f17a63d0d9..bec73b99b8 100644 --- a/config/examples/FYSETC/S6/Configuration.h +++ b/config/examples/FYSETC/S6/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Felix/DUAL/Configuration.h b/config/examples/Felix/DUAL/Configuration.h index e2df421105..233ef3fc9e 100644 --- a/config/examples/Felix/DUAL/Configuration.h +++ b/config/examples/Felix/DUAL/Configuration.h @@ -1532,7 +1532,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Felix/Single/Configuration.h b/config/examples/Felix/Single/Configuration.h index 2dd69e2600..f2096bcaaa 100644 --- a/config/examples/Felix/Single/Configuration.h +++ b/config/examples/Felix/Single/Configuration.h @@ -1532,7 +1532,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/FlashForge/Creator 2X/Configuration.h b/config/examples/FlashForge/Creator 2X/Configuration.h index 237047fc67..9586e72e36 100644 --- a/config/examples/FlashForge/Creator 2X/Configuration.h +++ b/config/examples/FlashForge/Creator 2X/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/FlashForge/CreatorPro/Configuration.h b/config/examples/FlashForge/CreatorPro/Configuration.h index c73aff64cb..3b55a68d19 100644 --- a/config/examples/FlashForge/CreatorPro/Configuration.h +++ b/config/examples/FlashForge/CreatorPro/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/FlyingBear/P902/Configuration.h b/config/examples/FlyingBear/P902/Configuration.h index 8b6423da42..aae2c2c707 100644 --- a/config/examples/FlyingBear/P902/Configuration.h +++ b/config/examples/FlyingBear/P902/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/FlyingBear/P905H/Configuration.h b/config/examples/FlyingBear/P905H/Configuration.h index a89666b236..181d2e34bc 100644 --- a/config/examples/FlyingBear/P905H/Configuration.h +++ b/config/examples/FlyingBear/P905H/Configuration.h @@ -1535,7 +1535,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/FoamCutter/generic/Configuration.h b/config/examples/FoamCutter/generic/Configuration.h index 0ea0f28115..cc2d040894 100644 --- a/config/examples/FoamCutter/generic/Configuration.h +++ b/config/examples/FoamCutter/generic/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/FoamCutter/rcKeith/Configuration.h b/config/examples/FoamCutter/rcKeith/Configuration.h index 00e1025a8e..ecd5d5a626 100644 --- a/config/examples/FoamCutter/rcKeith/Configuration.h +++ b/config/examples/FoamCutter/rcKeith/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/FolgerTech/FT-5 R2/Configuration.h b/config/examples/FolgerTech/FT-5 R2/Configuration.h index 44be783078..5e059b66ad 100644 --- a/config/examples/FolgerTech/FT-5 R2/Configuration.h +++ b/config/examples/FolgerTech/FT-5 R2/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/FolgerTech/i3-2020/Configuration.h b/config/examples/FolgerTech/i3-2020/Configuration.h index a8af2d53d2..fba467f17a 100644 --- a/config/examples/FolgerTech/i3-2020/Configuration.h +++ b/config/examples/FolgerTech/i3-2020/Configuration.h @@ -1533,7 +1533,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Formbot/Raptor/Configuration.h b/config/examples/Formbot/Raptor/Configuration.h index 5dcb186bb1..cbc095d23e 100644 --- a/config/examples/Formbot/Raptor/Configuration.h +++ b/config/examples/Formbot/Raptor/Configuration.h @@ -1622,7 +1622,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Formbot/T_Rex_2+/Configuration.h b/config/examples/Formbot/T_Rex_2+/Configuration.h index 0b9aa94abf..3940b4ffb4 100644 --- a/config/examples/Formbot/T_Rex_2+/Configuration.h +++ b/config/examples/Formbot/T_Rex_2+/Configuration.h @@ -1532,7 +1532,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Formbot/T_Rex_3/Configuration.h b/config/examples/Formbot/T_Rex_3/Configuration.h index 7d73ab180c..76ee549ccb 100644 --- a/config/examples/Formbot/T_Rex_3/Configuration.h +++ b/config/examples/Formbot/T_Rex_3/Configuration.h @@ -1538,7 +1538,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Geeetech/A10/Configuration.h b/config/examples/Geeetech/A10/Configuration.h index a32686a751..72374e0fc4 100644 --- a/config/examples/Geeetech/A10/Configuration.h +++ b/config/examples/Geeetech/A10/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Geeetech/A10D/Configuration.h b/config/examples/Geeetech/A10D/Configuration.h index e4499e1346..a0635db988 100644 --- a/config/examples/Geeetech/A10D/Configuration.h +++ b/config/examples/Geeetech/A10D/Configuration.h @@ -1530,7 +1530,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Geeetech/A10M/Stock LCD/Configuration.h b/config/examples/Geeetech/A10M/Stock LCD/Configuration.h index 61ae9b2bcf..26a291b751 100644 --- a/config/examples/Geeetech/A10M/Stock LCD/Configuration.h +++ b/config/examples/Geeetech/A10M/Stock LCD/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration.h b/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration.h index a3fd1537cf..71737ee21f 100644 --- a/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration.h +++ b/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Geeetech/A10PRO/Configuration.h b/config/examples/Geeetech/A10PRO/Configuration.h index 57df31cde3..47d7a29a30 100644 --- a/config/examples/Geeetech/A10PRO/Configuration.h +++ b/config/examples/Geeetech/A10PRO/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Geeetech/A10T/Stock LCD/Configuration.h b/config/examples/Geeetech/A10T/Stock LCD/Configuration.h index 1ade5d3ef1..690b980800 100644 --- a/config/examples/Geeetech/A10T/Stock LCD/Configuration.h +++ b/config/examples/Geeetech/A10T/Stock LCD/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration.h b/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration.h index cda4f8a0b1..c4d66f2014 100644 --- a/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration.h +++ b/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Geeetech/A20/Configuration.h b/config/examples/Geeetech/A20/Configuration.h index 138d167c6e..8ed1998451 100644 --- a/config/examples/Geeetech/A20/Configuration.h +++ b/config/examples/Geeetech/A20/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Geeetech/A20M/Configuration.h b/config/examples/Geeetech/A20M/Configuration.h index 92b9b257f1..c0af733a97 100644 --- a/config/examples/Geeetech/A20M/Configuration.h +++ b/config/examples/Geeetech/A20M/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Geeetech/A20T/Configuration.h b/config/examples/Geeetech/A20T/Configuration.h index 4084b1ada7..6fbaedb6e8 100644 --- a/config/examples/Geeetech/A20T/Configuration.h +++ b/config/examples/Geeetech/A20T/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Geeetech/A30/Configuration.h b/config/examples/Geeetech/A30/Configuration.h index e9ee08a253..39a70a27f0 100644 --- a/config/examples/Geeetech/A30/Configuration.h +++ b/config/examples/Geeetech/A30/Configuration.h @@ -1529,7 +1529,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Geeetech/A30M/Configuration.h b/config/examples/Geeetech/A30M/Configuration.h index 0109440d84..629019d827 100644 --- a/config/examples/Geeetech/A30M/Configuration.h +++ b/config/examples/Geeetech/A30M/Configuration.h @@ -1529,7 +1529,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Geeetech/A30T/Configuration.h b/config/examples/Geeetech/A30T/Configuration.h index de0803f182..306ea9a40e 100644 --- a/config/examples/Geeetech/A30T/Configuration.h +++ b/config/examples/Geeetech/A30T/Configuration.h @@ -1529,7 +1529,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Geeetech/D200/Configuration.h b/config/examples/Geeetech/D200/Configuration.h index 4eacc54cb5..20087697d5 100644 --- a/config/examples/Geeetech/D200/Configuration.h +++ b/config/examples/Geeetech/D200/Configuration.h @@ -1529,7 +1529,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Geeetech/Duplicator5/Configuration.h b/config/examples/Geeetech/Duplicator5/Configuration.h index d74e52f6f4..922f9bf78f 100644 --- a/config/examples/Geeetech/Duplicator5/Configuration.h +++ b/config/examples/Geeetech/Duplicator5/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Geeetech/E180/Configuration.h b/config/examples/Geeetech/E180/Configuration.h index c500f8ea5e..ad09b49c67 100644 --- a/config/examples/Geeetech/E180/Configuration.h +++ b/config/examples/Geeetech/E180/Configuration.h @@ -1530,7 +1530,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Geeetech/GT2560/Configuration.h b/config/examples/Geeetech/GT2560/Configuration.h index 260693bf19..4e8b639e36 100644 --- a/config/examples/Geeetech/GT2560/Configuration.h +++ b/config/examples/Geeetech/GT2560/Configuration.h @@ -1536,7 +1536,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h index 340f7afec7..c51e811d3d 100644 --- a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h +++ b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Geeetech/M201/Configuration.h b/config/examples/Geeetech/M201/Configuration.h index 5c5345adc8..87d91478a3 100644 --- a/config/examples/Geeetech/M201/Configuration.h +++ b/config/examples/Geeetech/M201/Configuration.h @@ -1529,7 +1529,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Geeetech/MeCreator2/Configuration.h b/config/examples/Geeetech/MeCreator2/Configuration.h index 60073812cf..f7ddcb69df 100644 --- a/config/examples/Geeetech/MeCreator2/Configuration.h +++ b/config/examples/Geeetech/MeCreator2/Configuration.h @@ -1530,7 +1530,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Geeetech/Me_creator/Configuration.h b/config/examples/Geeetech/Me_creator/Configuration.h index 845b8dbac6..d1e5beb5e4 100644 --- a/config/examples/Geeetech/Me_creator/Configuration.h +++ b/config/examples/Geeetech/Me_creator/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Geeetech/Me_ducer/Configuration.h b/config/examples/Geeetech/Me_ducer/Configuration.h index 1830579d77..d069b4aad6 100644 --- a/config/examples/Geeetech/Me_ducer/Configuration.h +++ b/config/examples/Geeetech/Me_ducer/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Geeetech/PI3A PRO/Configuration.h b/config/examples/Geeetech/PI3A PRO/Configuration.h index c36a831e90..87eb12df56 100644 --- a/config/examples/Geeetech/PI3A PRO/Configuration.h +++ b/config/examples/Geeetech/PI3A PRO/Configuration.h @@ -1541,7 +1541,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h index 6d01842857..5a4b53cc07 100644 --- a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h @@ -1541,7 +1541,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h index 1183fd3323..d94e044374 100644 --- a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h @@ -1541,7 +1541,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h index 243d609d43..40a126d3c9 100644 --- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h index 9330c3824d..681a4aa832 100644 --- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/HMS434/Configuration.h b/config/examples/HMS434/Configuration.h index 0e11f2d06a..691ecb230f 100644 --- a/config/examples/HMS434/Configuration.h +++ b/config/examples/HMS434/Configuration.h @@ -1529,7 +1529,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Infitary/i3-M508/Configuration.h b/config/examples/Infitary/i3-M508/Configuration.h index 85ebab9e41..7501cdd04f 100644 --- a/config/examples/Infitary/i3-M508/Configuration.h +++ b/config/examples/Infitary/i3-M508/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Intamsys/FunmatHT 4988/Configuration.h b/config/examples/Intamsys/FunmatHT 4988/Configuration.h index ec96ce949f..89a84c4278 100644 --- a/config/examples/Intamsys/FunmatHT 4988/Configuration.h +++ b/config/examples/Intamsys/FunmatHT 4988/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/JGAurora/A1/Configuration.h b/config/examples/JGAurora/A1/Configuration.h index 0d2aacb930..949e9c81fa 100644 --- a/config/examples/JGAurora/A1/Configuration.h +++ b/config/examples/JGAurora/A1/Configuration.h @@ -1535,7 +1535,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/JGAurora/A3/Configuration.h b/config/examples/JGAurora/A3/Configuration.h index 7ea1b2a1ce..4e95996645 100644 --- a/config/examples/JGAurora/A3/Configuration.h +++ b/config/examples/JGAurora/A3/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/JGAurora/A5/Configuration.h b/config/examples/JGAurora/A5/Configuration.h index 75e4f0d050..dc1a1ecabf 100644 --- a/config/examples/JGAurora/A5/Configuration.h +++ b/config/examples/JGAurora/A5/Configuration.h @@ -1539,7 +1539,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/JGAurora/A5S/Configuration.h b/config/examples/JGAurora/A5S/Configuration.h index d7b061e1fd..63212c4768 100644 --- a/config/examples/JGAurora/A5S/Configuration.h +++ b/config/examples/JGAurora/A5S/Configuration.h @@ -1535,7 +1535,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/JGAurora/Magic/Configuration.h b/config/examples/JGAurora/Magic/Configuration.h index 3fb14da14f..80389e7435 100644 --- a/config/examples/JGAurora/Magic/Configuration.h +++ b/config/examples/JGAurora/Magic/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Kingroon/KP3/Configuration.h b/config/examples/Kingroon/KP3/Configuration.h index c67c793244..d3c5ede243 100644 --- a/config/examples/Kingroon/KP3/Configuration.h +++ b/config/examples/Kingroon/KP3/Configuration.h @@ -1530,7 +1530,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Kingroon/KP3S/Configuration.h b/config/examples/Kingroon/KP3S/Configuration.h index 2dd68c08d9..e8e95ee38a 100644 --- a/config/examples/Kingroon/KP3S/Configuration.h +++ b/config/examples/Kingroon/KP3S/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Kingroon/KP3S_Pro/Configuration.h b/config/examples/Kingroon/KP3S_Pro/Configuration.h index 68dac8affe..a1b697effb 100644 --- a/config/examples/Kingroon/KP3S_Pro/Configuration.h +++ b/config/examples/Kingroon/KP3S_Pro/Configuration.h @@ -1562,7 +1562,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Kingroon/KP5L/Configuration.h b/config/examples/Kingroon/KP5L/Configuration.h index e5dc2d2611..23687f3ed1 100644 --- a/config/examples/Kingroon/KP5L/Configuration.h +++ b/config/examples/Kingroon/KP5L/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Labists/ET4/Configuration.h b/config/examples/Labists/ET4/Configuration.h index ec902b0fdd..5401f5a39f 100644 --- a/config/examples/Labists/ET4/Configuration.h +++ b/config/examples/Labists/ET4/Configuration.h @@ -1537,7 +1537,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Longer/LK5/Configuration.h b/config/examples/Longer/LK5/Configuration.h index 4ff7c54645..9c85be91d4 100644 --- a/config/examples/Longer/LK5/Configuration.h +++ b/config/examples/Longer/LK5/Configuration.h @@ -1532,7 +1532,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/LulzBot/Mini2/Teensy/Configuration.h b/config/examples/LulzBot/Mini2/Teensy/Configuration.h index 6247a91294..0aa80f65cb 100644 --- a/config/examples/LulzBot/Mini2/Teensy/Configuration.h +++ b/config/examples/LulzBot/Mini2/Teensy/Configuration.h @@ -1551,7 +1551,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/LulzBot/TAZ4/Configuration.h b/config/examples/LulzBot/TAZ4/Configuration.h index e6d2f1d488..ae71041a5e 100644 --- a/config/examples/LulzBot/TAZ4/Configuration.h +++ b/config/examples/LulzBot/TAZ4/Configuration.h @@ -1542,7 +1542,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/MBot/Cube/Configuration.h b/config/examples/MBot/Cube/Configuration.h index c1fa849136..3b2320ebc6 100644 --- a/config/examples/MBot/Cube/Configuration.h +++ b/config/examples/MBot/Cube/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/MakerFarm/Pegasus 12/Configuration.h b/config/examples/MakerFarm/Pegasus 12/Configuration.h index 91d6e98861..1c5b3717b1 100644 --- a/config/examples/MakerFarm/Pegasus 12/Configuration.h +++ b/config/examples/MakerFarm/Pegasus 12/Configuration.h @@ -1537,7 +1537,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/MakerParts/Configuration.h b/config/examples/MakerParts/Configuration.h index ac3f757dc7..27ce17fbbc 100644 --- a/config/examples/MakerParts/Configuration.h +++ b/config/examples/MakerParts/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/MakerTech3D/Proforge2sDual/Configuration.h b/config/examples/MakerTech3D/Proforge2sDual/Configuration.h index de83659f28..67dbfba578 100644 --- a/config/examples/MakerTech3D/Proforge2sDual/Configuration.h +++ b/config/examples/MakerTech3D/Proforge2sDual/Configuration.h @@ -1534,7 +1534,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Malyan/M150/Configuration.h b/config/examples/Malyan/M150/Configuration.h index 6e4111bb7a..c8cfbaf657 100644 --- a/config/examples/Malyan/M150/Configuration.h +++ b/config/examples/Malyan/M150/Configuration.h @@ -1551,7 +1551,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Malyan/M180/Configuration.h b/config/examples/Malyan/M180/Configuration.h index 86bd3932bb..c352ad331a 100644 --- a/config/examples/Malyan/M180/Configuration.h +++ b/config/examples/Malyan/M180/Configuration.h @@ -1532,7 +1532,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Malyan/M200/Configuration.h b/config/examples/Malyan/M200/Configuration.h index f631b832f8..885f6ab972 100644 --- a/config/examples/Malyan/M200/Configuration.h +++ b/config/examples/Malyan/M200/Configuration.h @@ -1537,7 +1537,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Micromake/C1/basic/Configuration.h b/config/examples/Micromake/C1/basic/Configuration.h index eb70cfd3f7..42c19938e4 100644 --- a/config/examples/Micromake/C1/basic/Configuration.h +++ b/config/examples/Micromake/C1/basic/Configuration.h @@ -1535,7 +1535,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Micromake/C1/enhanced/Configuration.h b/config/examples/Micromake/C1/enhanced/Configuration.h index 561bb5d2c8..addb9d7d14 100644 --- a/config/examples/Micromake/C1/enhanced/Configuration.h +++ b/config/examples/Micromake/C1/enhanced/Configuration.h @@ -1535,7 +1535,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Mks/Robin/Configuration.h b/config/examples/Mks/Robin/Configuration.h index 8556681e95..77145c20ae 100644 --- a/config/examples/Mks/Robin/Configuration.h +++ b/config/examples/Mks/Robin/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Mks/Robin_Lite3/Configuration.h b/config/examples/Mks/Robin_Lite3/Configuration.h index 880b615267..278d3655f1 100644 --- a/config/examples/Mks/Robin_Lite3/Configuration.h +++ b/config/examples/Mks/Robin_Lite3/Configuration.h @@ -1539,7 +1539,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Mks/Robin_Pro/Configuration.h b/config/examples/Mks/Robin_Pro/Configuration.h index b6e1524988..8df5d80390 100644 --- a/config/examples/Mks/Robin_Pro/Configuration.h +++ b/config/examples/Mks/Robin_Pro/Configuration.h @@ -1533,7 +1533,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Mks/Sbase/Configuration.h b/config/examples/Mks/Sbase/Configuration.h index faa56c6369..5086da6dd4 100644 --- a/config/examples/Mks/Sbase/Configuration.h +++ b/config/examples/Mks/Sbase/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Modix/Big60/Configuration.h b/config/examples/Modix/Big60/Configuration.h index b72089d055..f44ff1ba84 100644 --- a/config/examples/Modix/Big60/Configuration.h +++ b/config/examples/Modix/Big60/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Nextion/Configuration.h b/config/examples/Nextion/Configuration.h index b6fdae8474..9c7c2338b6 100644 --- a/config/examples/Nextion/Configuration.h +++ b/config/examples/Nextion/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/ORD Bot/Hadron/Sanguinololu/Configuration.h b/config/examples/ORD Bot/Hadron/Sanguinololu/Configuration.h index 26ca202089..ebb082755e 100644 --- a/config/examples/ORD Bot/Hadron/Sanguinololu/Configuration.h +++ b/config/examples/ORD Bot/Hadron/Sanguinololu/Configuration.h @@ -1562,7 +1562,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Opulo/Lumen_REV3/Configuration.h b/config/examples/Opulo/Lumen_REV3/Configuration.h index 402ae71421..294ef2559e 100644 --- a/config/examples/Opulo/Lumen_REV3/Configuration.h +++ b/config/examples/Opulo/Lumen_REV3/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Opulo/Lumen_REV4/Configuration.h b/config/examples/Opulo/Lumen_REV4/Configuration.h index 1a3a96a33c..b79f3e735e 100644 --- a/config/examples/Opulo/Lumen_REV4/Configuration.h +++ b/config/examples/Opulo/Lumen_REV4/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Ortur 4/Configuration.h b/config/examples/Ortur 4/Configuration.h index 6704d928a2..557e30bd64 100644 --- a/config/examples/Ortur 4/Configuration.h +++ b/config/examples/Ortur 4/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Polargraph/Configuration.h b/config/examples/Polargraph/Configuration.h index fd3d480a45..4f6843ada2 100644 --- a/config/examples/Polargraph/Configuration.h +++ b/config/examples/Polargraph/Configuration.h @@ -1535,7 +1535,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Printrbot/PrintrboardG2/Configuration.h b/config/examples/Printrbot/PrintrboardG2/Configuration.h index 56e29f0fd7..bf19aed201 100644 --- a/config/examples/Printrbot/PrintrboardG2/Configuration.h +++ b/config/examples/Printrbot/PrintrboardG2/Configuration.h @@ -1533,7 +1533,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Printrbot/Simple Metal RevD/Configuration.h b/config/examples/Printrbot/Simple Metal RevD/Configuration.h index 6182780be8..50895c1fc1 100644 --- a/config/examples/Printrbot/Simple Metal RevD/Configuration.h +++ b/config/examples/Printrbot/Simple Metal RevD/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Prusa/MK3/Configuration.h b/config/examples/Prusa/MK3/Configuration.h index 1e51e2560f..40ba957816 100644 --- a/config/examples/Prusa/MK3/Configuration.h +++ b/config/examples/Prusa/MK3/Configuration.h @@ -1561,7 +1561,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h index 3263d95fd5..5ff6bab8a1 100644 --- a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h +++ b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h @@ -1551,7 +1551,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Qidi/Qidi 1/Configuration.h b/config/examples/Qidi/Qidi 1/Configuration.h index 8e7ba34349..80e93c664b 100644 --- a/config/examples/Qidi/Qidi 1/Configuration.h +++ b/config/examples/Qidi/Qidi 1/Configuration.h @@ -1532,7 +1532,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Raiscube/A8r/Configuration.h b/config/examples/Raiscube/A8r/Configuration.h index ee34ca99e8..d32662b370 100644 --- a/config/examples/Raiscube/A8r/Configuration.h +++ b/config/examples/Raiscube/A8r/Configuration.h @@ -1549,7 +1549,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/RapideLite/RL200/Configuration.h b/config/examples/RapideLite/RL200/Configuration.h index a10de23e0f..908357f36d 100644 --- a/config/examples/RapideLite/RL200/Configuration.h +++ b/config/examples/RapideLite/RL200/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Renkforce/RF100/Configuration.h b/config/examples/Renkforce/RF100/Configuration.h index 96504d80c8..2a31709da8 100644 --- a/config/examples/Renkforce/RF100/Configuration.h +++ b/config/examples/Renkforce/RF100/Configuration.h @@ -1536,7 +1536,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Renkforce/RF100XL/Configuration.h b/config/examples/Renkforce/RF100XL/Configuration.h index 2e51d85a3a..7f2757a3b5 100644 --- a/config/examples/Renkforce/RF100XL/Configuration.h +++ b/config/examples/Renkforce/RF100XL/Configuration.h @@ -1536,7 +1536,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Renkforce/RF100v2/Configuration.h b/config/examples/Renkforce/RF100v2/Configuration.h index e7b42b27b5..51d3ef6de8 100644 --- a/config/examples/Renkforce/RF100v2/Configuration.h +++ b/config/examples/Renkforce/RF100v2/Configuration.h @@ -1536,7 +1536,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/RepRapPro/Huxley/Configuration.h b/config/examples/RepRapPro/Huxley/Configuration.h index 16860b933b..07a7b12337 100644 --- a/config/examples/RepRapPro/Huxley/Configuration.h +++ b/config/examples/RepRapPro/Huxley/Configuration.h @@ -1572,7 +1572,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/RepRapWorld/Megatronics/Configuration.h b/config/examples/RepRapWorld/Megatronics/Configuration.h index 5167c5510b..a16f671699 100644 --- a/config/examples/RepRapWorld/Megatronics/Configuration.h +++ b/config/examples/RepRapWorld/Megatronics/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/RepRapWorld/Minitronics20/CNC/Configuration.h b/config/examples/RepRapWorld/Minitronics20/CNC/Configuration.h index 9df853d8c6..d66f85000f 100644 --- a/config/examples/RepRapWorld/Minitronics20/CNC/Configuration.h +++ b/config/examples/RepRapWorld/Minitronics20/CNC/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/RigidBot/Configuration.h b/config/examples/RigidBot/Configuration.h index ca569ffd68..fa4b17579e 100644 --- a/config/examples/RigidBot/Configuration.h +++ b/config/examples/RigidBot/Configuration.h @@ -1545,7 +1545,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Robo3D/R1+/Configuration.h b/config/examples/Robo3D/R1+/Configuration.h index 5a1e4d3066..0d6132f665 100644 --- a/config/examples/Robo3D/R1+/Configuration.h +++ b/config/examples/Robo3D/R1+/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/SCARA/MP_SCARA/Configuration.h b/config/examples/SCARA/MP_SCARA/Configuration.h index fc5111b8e0..b9bfa86416 100644 --- a/config/examples/SCARA/MP_SCARA/Configuration.h +++ b/config/examples/SCARA/MP_SCARA/Configuration.h @@ -1533,7 +1533,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/SCARA/Morgan/Configuration.h b/config/examples/SCARA/Morgan/Configuration.h index a1fa70d5a2..2a1c60e138 100644 --- a/config/examples/SCARA/Morgan/Configuration.h +++ b/config/examples/SCARA/Morgan/Configuration.h @@ -1532,7 +1532,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration.h b/config/examples/STM32/Black_STM32F407VET6/Configuration.h index 0f15c806d7..49cf892176 100644 --- a/config/examples/STM32/Black_STM32F407VET6/Configuration.h +++ b/config/examples/STM32/Black_STM32F407VET6/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/STM32/STM32F103RE/Configuration.h b/config/examples/STM32/STM32F103RE/Configuration.h index ec0930412b..5adde83bd0 100644 --- a/config/examples/STM32/STM32F103RE/Configuration.h +++ b/config/examples/STM32/STM32F103RE/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Simax/Mi-M200/Configuration.h b/config/examples/Simax/Mi-M200/Configuration.h index c5ae4a4298..dc6781e384 100644 --- a/config/examples/Simax/Mi-M200/Configuration.h +++ b/config/examples/Simax/Mi-M200/Configuration.h @@ -1532,7 +1532,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Simulator/Configuration.h b/config/examples/Simulator/Configuration.h index 9b2b8dfa9f..0f2b70229c 100644 --- a/config/examples/Simulator/Configuration.h +++ b/config/examples/Simulator/Configuration.h @@ -1548,7 +1548,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration.h b/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration.h index 0a20a10237..425897eb0a 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration.h @@ -1539,7 +1539,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration.h index 86ba654e8d..b473045d7e 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -1537,7 +1537,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration.h b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration.h index e9e3db9f7d..470678f2b3 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration.h @@ -1539,7 +1539,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Sovol/SV-01/CrealityV22/Configuration.h b/config/examples/Sovol/SV-01/CrealityV22/Configuration.h index 5f562f29cf..5f970fc0b7 100644 --- a/config/examples/Sovol/SV-01/CrealityV22/Configuration.h +++ b/config/examples/Sovol/SV-01/CrealityV22/Configuration.h @@ -1536,7 +1536,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Sovol/SV-01/CrealityV221/Configuration.h b/config/examples/Sovol/SV-01/CrealityV221/Configuration.h index 205013aebc..d96c4ae55e 100644 --- a/config/examples/Sovol/SV-01/CrealityV221/Configuration.h +++ b/config/examples/Sovol/SV-01/CrealityV221/Configuration.h @@ -1536,7 +1536,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Sovol/SV-02/Configuration.h b/config/examples/Sovol/SV-02/Configuration.h index 616a76fc68..e58f4627b8 100644 --- a/config/examples/Sovol/SV-02/Configuration.h +++ b/config/examples/Sovol/SV-02/Configuration.h @@ -1536,7 +1536,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Sovol/SV-03/Configuration.h b/config/examples/Sovol/SV-03/Configuration.h index fb5184d49f..57595790c2 100644 --- a/config/examples/Sovol/SV-03/Configuration.h +++ b/config/examples/Sovol/SV-03/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Sunlu/S8/Configuration.h b/config/examples/Sunlu/S8/Configuration.h index 44addaf593..5f4cd38d34 100644 --- a/config/examples/Sunlu/S8/Configuration.h +++ b/config/examples/Sunlu/S8/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Sunlu/T3/Configuration.h b/config/examples/Sunlu/T3/Configuration.h index 19fb883428..fb994e04f4 100644 --- a/config/examples/Sunlu/T3/Configuration.h +++ b/config/examples/Sunlu/T3/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/TPARA/AXEL_TPARA/Configuration.h b/config/examples/TPARA/AXEL_TPARA/Configuration.h index 444e9bda5b..47bdcc9d58 100644 --- a/config/examples/TPARA/AXEL_TPARA/Configuration.h +++ b/config/examples/TPARA/AXEL_TPARA/Configuration.h @@ -1535,7 +1535,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Tevo/Michelangelo/Configuration.h b/config/examples/Tevo/Michelangelo/Configuration.h index 4ecbe12867..a8b9a883c8 100644 --- a/config/examples/Tevo/Michelangelo/Configuration.h +++ b/config/examples/Tevo/Michelangelo/Configuration.h @@ -1532,7 +1532,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Tevo/Nereus/Configuration.h b/config/examples/Tevo/Nereus/Configuration.h index 68ea4dd8ca..6ed4be97e1 100644 --- a/config/examples/Tevo/Nereus/Configuration.h +++ b/config/examples/Tevo/Nereus/Configuration.h @@ -1532,7 +1532,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Tevo/Tarantula Pro/MKS Gen_L/Configuration.h b/config/examples/Tevo/Tarantula Pro/MKS Gen_L/Configuration.h index 5c7e7768e0..21f23df653 100644 --- a/config/examples/Tevo/Tarantula Pro/MKS Gen_L/Configuration.h +++ b/config/examples/Tevo/Tarantula Pro/MKS Gen_L/Configuration.h @@ -1532,7 +1532,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Tevo/Tarantula Pro/MKS SGen_L/Configuration.h b/config/examples/Tevo/Tarantula Pro/MKS SGen_L/Configuration.h index 9a6ea4e9e9..e1f844c461 100644 --- a/config/examples/Tevo/Tarantula Pro/MKS SGen_L/Configuration.h +++ b/config/examples/Tevo/Tarantula Pro/MKS SGen_L/Configuration.h @@ -1532,7 +1532,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h index 3d5c07f725..84dc840837 100644 --- a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h +++ b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h @@ -1532,7 +1532,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Tevo/Tornado/V2 (MKS Gen_L)/Configuration.h b/config/examples/Tevo/Tornado/V2 (MKS Gen_L)/Configuration.h index f9360524fe..7d11e8f7ae 100644 --- a/config/examples/Tevo/Tornado/V2 (MKS Gen_L)/Configuration.h +++ b/config/examples/Tevo/Tornado/V2 (MKS Gen_L)/Configuration.h @@ -1532,7 +1532,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration.h b/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration.h index 055d185248..0784b4dd24 100644 --- a/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration.h +++ b/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/TinyBoy2/Configuration.h b/config/examples/TinyBoy2/Configuration.h index 58234e2081..8521b33ae1 100644 --- a/config/examples/TinyBoy2/Configuration.h +++ b/config/examples/TinyBoy2/Configuration.h @@ -1571,7 +1571,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Tronxy/D01/CXY-v6-191017 board/Configuration.h b/config/examples/Tronxy/D01/CXY-v6-191017 board/Configuration.h index 07e520f77d..b6f51d74ef 100644 --- a/config/examples/Tronxy/D01/CXY-v6-191017 board/Configuration.h +++ b/config/examples/Tronxy/D01/CXY-v6-191017 board/Configuration.h @@ -1540,7 +1540,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Tronxy/X1/Configuration.h b/config/examples/Tronxy/X1/Configuration.h index 982b3ff533..d3731f0ca4 100644 --- a/config/examples/Tronxy/X1/Configuration.h +++ b/config/examples/Tronxy/X1/Configuration.h @@ -1532,7 +1532,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Tronxy/X3A/Configuration.h b/config/examples/Tronxy/X3A/Configuration.h index 6a7102adb7..2d5ed55663 100644 --- a/config/examples/Tronxy/X3A/Configuration.h +++ b/config/examples/Tronxy/X3A/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration.h b/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration.h index 9301007357..aff79c3d35 100644 --- a/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration.h +++ b/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration.h @@ -1532,7 +1532,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration.h b/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration.h index 4f362ae5dc..b49378e008 100644 --- a/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration.h +++ b/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration.h @@ -1540,7 +1540,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Tronxy/X5S/Configuration.h b/config/examples/Tronxy/X5S/Configuration.h index b60dc37fb1..1888460ba6 100644 --- a/config/examples/Tronxy/X5S/Configuration.h +++ b/config/examples/Tronxy/X5S/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Tronxy/X5SA-2E/Configuration.h b/config/examples/Tronxy/X5SA-2E/Configuration.h index 2991cba8ef..f6f4876d05 100644 --- a/config/examples/Tronxy/X5SA-2E/Configuration.h +++ b/config/examples/Tronxy/X5SA-2E/Configuration.h @@ -1533,7 +1533,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Tronxy/X5SA/Configuration.h b/config/examples/Tronxy/X5SA/Configuration.h index 8fe606b031..f3e66bc981 100644 --- a/config/examples/Tronxy/X5SA/Configuration.h +++ b/config/examples/Tronxy/X5SA/Configuration.h @@ -1533,7 +1533,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Tronxy/XY100/Configuration.h b/config/examples/Tronxy/XY100/Configuration.h index 1645f0e766..7a4d885568 100644 --- a/config/examples/Tronxy/XY100/Configuration.h +++ b/config/examples/Tronxy/XY100/Configuration.h @@ -1538,7 +1538,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Tronxy/XY2-Pro/Configuration.h b/config/examples/Tronxy/XY2-Pro/Configuration.h index 8d5bf04702..3a82e857fe 100644 --- a/config/examples/Tronxy/XY2-Pro/Configuration.h +++ b/config/examples/Tronxy/XY2-Pro/Configuration.h @@ -1567,7 +1567,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Two Trees/BlueR Plus/Configuration.h b/config/examples/Two Trees/BlueR Plus/Configuration.h index 41a73cb3b7..8891a53199 100644 --- a/config/examples/Two Trees/BlueR Plus/Configuration.h +++ b/config/examples/Two Trees/BlueR Plus/Configuration.h @@ -1533,7 +1533,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Two Trees/BlueR/BlueR V1/Configuration.h b/config/examples/Two Trees/BlueR/BlueR V1/Configuration.h index 54687d94c2..30e37974cf 100644 --- a/config/examples/Two Trees/BlueR/BlueR V1/Configuration.h +++ b/config/examples/Two Trees/BlueR/BlueR V1/Configuration.h @@ -1550,7 +1550,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Two Trees/BlueR/BlueR V2/Configuration.h b/config/examples/Two Trees/BlueR/BlueR V2/Configuration.h index 554a9e3dd9..fce8c0eb48 100644 --- a/config/examples/Two Trees/BlueR/BlueR V2/Configuration.h +++ b/config/examples/Two Trees/BlueR/BlueR V2/Configuration.h @@ -1551,7 +1551,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Two Trees/BlueR/BlueR V3/Configuration.h b/config/examples/Two Trees/BlueR/BlueR V3/Configuration.h index 87ed480b99..075aaa3ce2 100644 --- a/config/examples/Two Trees/BlueR/BlueR V3/Configuration.h +++ b/config/examples/Two Trees/BlueR/BlueR V3/Configuration.h @@ -1562,7 +1562,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration.h b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration.h index 6da01fea35..b9f5a46dcc 100644 --- a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration.h +++ b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration.h @@ -1553,7 +1553,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration.h b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration.h index 5b76dd45a3..e49f52cdea 100644 --- a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration.h +++ b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration.h @@ -1553,7 +1553,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Two Trees/Sapphire Pro/Configuration.h b/config/examples/Two Trees/Sapphire Pro/Configuration.h index 2865d6ef24..3d95f88c75 100644 --- a/config/examples/Two Trees/Sapphire Pro/Configuration.h +++ b/config/examples/Two Trees/Sapphire Pro/Configuration.h @@ -1548,7 +1548,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/UltiMachine/Archim1/Configuration.h b/config/examples/UltiMachine/Archim1/Configuration.h index 1d93db15ec..468f562cac 100644 --- a/config/examples/UltiMachine/Archim1/Configuration.h +++ b/config/examples/UltiMachine/Archim1/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/UltiMachine/Archim2/Configuration.h b/config/examples/UltiMachine/Archim2/Configuration.h index 8ff1cce25d..e82fbd55e0 100644 --- a/config/examples/UltiMachine/Archim2/Configuration.h +++ b/config/examples/UltiMachine/Archim2/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Ultimaker/Ultimaker 2+/Configuration.h b/config/examples/Ultimaker/Ultimaker 2+/Configuration.h index 7193e188f1..8f734a9ee0 100644 --- a/config/examples/Ultimaker/Ultimaker 2+/Configuration.h +++ b/config/examples/Ultimaker/Ultimaker 2+/Configuration.h @@ -1534,7 +1534,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Ultimaker/Ultimaker 2/Configuration.h b/config/examples/Ultimaker/Ultimaker 2/Configuration.h index c02ecbb07a..b52927c873 100644 --- a/config/examples/Ultimaker/Ultimaker 2/Configuration.h +++ b/config/examples/Ultimaker/Ultimaker 2/Configuration.h @@ -1546,7 +1546,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration.h b/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration.h index 367034a5ee..2d92415dce 100644 --- a/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration.h +++ b/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration.h b/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration.h index 7b8edc3ad0..e46a2a8f71 100644 --- a/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration.h +++ b/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration.h @@ -1534,7 +1534,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration.h b/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration.h index f03a52a9cd..c94eff1f05 100644 --- a/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration.h +++ b/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration.h @@ -1535,7 +1535,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/VORONDesign/Configuration.h b/config/examples/VORONDesign/Configuration.h index 5e9a449ccd..0876131e01 100644 --- a/config/examples/VORONDesign/Configuration.h +++ b/config/examples/VORONDesign/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Velleman/K8200 Upgraded/Configuration.h b/config/examples/Velleman/K8200 Upgraded/Configuration.h index 9a8e7b446c..7d1929ce8a 100644 --- a/config/examples/Velleman/K8200 Upgraded/Configuration.h +++ b/config/examples/Velleman/K8200 Upgraded/Configuration.h @@ -1566,7 +1566,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Velleman/K8200/Configuration.h b/config/examples/Velleman/K8200/Configuration.h index da783e7b51..3fdad144b0 100644 --- a/config/examples/Velleman/K8200/Configuration.h +++ b/config/examples/Velleman/K8200/Configuration.h @@ -1569,7 +1569,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Velleman/K8400/Dual-head/Configuration.h b/config/examples/Velleman/K8400/Dual-head/Configuration.h index 89ba4ef68d..8355adf922 100644 --- a/config/examples/Velleman/K8400/Dual-head/Configuration.h +++ b/config/examples/Velleman/K8400/Dual-head/Configuration.h @@ -1532,7 +1532,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Velleman/K8400/Single-head/Configuration.h b/config/examples/Velleman/K8400/Single-head/Configuration.h index 8c15d70ad4..461ded385e 100644 --- a/config/examples/Velleman/K8400/Single-head/Configuration.h +++ b/config/examples/Velleman/K8400/Single-head/Configuration.h @@ -1532,7 +1532,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Voxelab/Aquila/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Voxelab/Aquila/BigTreeTech SKR Mini E3 2.0/Configuration.h index ff2361373d..ea23d54ce8 100644 --- a/config/examples/Voxelab/Aquila/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Voxelab/Aquila/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -1532,7 +1532,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/WASP/PowerWASP/Configuration.h b/config/examples/WASP/PowerWASP/Configuration.h index f79d3a14cf..7459ead651 100644 --- a/config/examples/WASP/PowerWASP/Configuration.h +++ b/config/examples/WASP/PowerWASP/Configuration.h @@ -1545,7 +1545,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Wanhao/Duplicator 4S/Configuration.h b/config/examples/Wanhao/Duplicator 4S/Configuration.h index 2a24ebac05..6d0af3fa7e 100644 --- a/config/examples/Wanhao/Duplicator 4S/Configuration.h +++ b/config/examples/Wanhao/Duplicator 4S/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Wanhao/Duplicator 6/Configuration.h b/config/examples/Wanhao/Duplicator 6/Configuration.h index 1dd78f7f0e..663b0ade27 100644 --- a/config/examples/Wanhao/Duplicator 6/Configuration.h +++ b/config/examples/Wanhao/Duplicator 6/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h b/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h index 73364b84b9..a163b86613 100644 --- a/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h +++ b/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h index e98a30f621..d346ee4bdc 100644 --- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h +++ b/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h @@ -1532,7 +1532,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Wanhao/Duplicator i3 Plus/Configuration.h b/config/examples/Wanhao/Duplicator i3 Plus/Configuration.h index 90b09f64b1..6db19789e3 100644 --- a/config/examples/Wanhao/Duplicator i3 Plus/Configuration.h +++ b/config/examples/Wanhao/Duplicator i3 Plus/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Weedo/Tina2/V2/Configuration.h b/config/examples/Weedo/Tina2/V2/Configuration.h index de3d1bd905..f6e83e5502 100644 --- a/config/examples/Weedo/Tina2/V2/Configuration.h +++ b/config/examples/Weedo/Tina2/V2/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Weedo/Tina2/V3/Configuration.h b/config/examples/Weedo/Tina2/V3/Configuration.h index 1aaec7034f..89c83b6d01 100644 --- a/config/examples/Weedo/Tina2/V3/Configuration.h +++ b/config/examples/Weedo/Tina2/V3/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Weistek/wt150/Configuration.h b/config/examples/Weistek/wt150/Configuration.h index 146b9333d0..2494ab5f0d 100644 --- a/config/examples/Weistek/wt150/Configuration.h +++ b/config/examples/Weistek/wt150/Configuration.h @@ -1532,7 +1532,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Zonestar/P802M/Configuration.h b/config/examples/Zonestar/P802M/Configuration.h index 3e0e781814..367c7ec15d 100644 --- a/config/examples/Zonestar/P802M/Configuration.h +++ b/config/examples/Zonestar/P802M/Configuration.h @@ -1531,7 +1531,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h index ddcc7d6487..5a414e7d05 100644 --- a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h +++ b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h @@ -1536,7 +1536,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h index aa3a8b6fae..05eba9e8b9 100755 --- a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h +++ b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h @@ -1535,7 +1535,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h index 06197f57ea..f6d6309667 100644 --- a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h +++ b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h @@ -1588,7 +1588,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/delta/Anycubic/Kossel/Configuration.h b/config/examples/delta/Anycubic/Kossel/Configuration.h index 91ad35dda8..bdf3a9bc22 100644 --- a/config/examples/delta/Anycubic/Kossel/Configuration.h +++ b/config/examples/delta/Anycubic/Kossel/Configuration.h @@ -1593,7 +1593,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/delta/Anycubic/Predator/Configuration.h b/config/examples/delta/Anycubic/Predator/Configuration.h index d3b3387a16..4a91ffd07d 100644 --- a/config/examples/delta/Anycubic/Predator/Configuration.h +++ b/config/examples/delta/Anycubic/Predator/Configuration.h @@ -1539,7 +1539,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/delta/Dreammaker/Overlord/Configuration.h b/config/examples/delta/Dreammaker/Overlord/Configuration.h index 0565417048..0f76eb14a5 100644 --- a/config/examples/delta/Dreammaker/Overlord/Configuration.h +++ b/config/examples/delta/Dreammaker/Overlord/Configuration.h @@ -1538,7 +1538,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h index 1802d1b625..0ba85fcb4e 100644 --- a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h +++ b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h @@ -1545,7 +1545,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h index 0d62b5a9ec..d2af26ea77 100644 --- a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h +++ b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h @@ -1540,7 +1540,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h b/config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h index a72e574365..e631137c8e 100644 --- a/config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h +++ b/config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h @@ -1538,7 +1538,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/delta/FLSUN/QQ-S/Configuration.h b/config/examples/delta/FLSUN/QQ-S/Configuration.h index 026b640be9..c6d17c81d0 100644 --- a/config/examples/delta/FLSUN/QQ-S/Configuration.h +++ b/config/examples/delta/FLSUN/QQ-S/Configuration.h @@ -1539,7 +1539,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/delta/FLSUN/QQS-Pro/Configuration.h b/config/examples/delta/FLSUN/QQS-Pro/Configuration.h index b5e6279f54..4d3d84df6a 100644 --- a/config/examples/delta/FLSUN/QQS-Pro/Configuration.h +++ b/config/examples/delta/FLSUN/QQS-Pro/Configuration.h @@ -1539,7 +1539,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration.h index 07ec903331..9a424d3605 100644 --- a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h +++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration.h @@ -1542,7 +1542,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/delta/FLSUN/kossel/Configuration.h b/config/examples/delta/FLSUN/kossel/Configuration.h index e07c4865c9..c334dc5d89 100644 --- a/config/examples/delta/FLSUN/kossel/Configuration.h +++ b/config/examples/delta/FLSUN/kossel/Configuration.h @@ -1541,7 +1541,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration.h b/config/examples/delta/FLSUN/kossel_mini/Configuration.h index 5b9738f673..73882ab490 100644 --- a/config/examples/delta/FLSUN/kossel_mini/Configuration.h +++ b/config/examples/delta/FLSUN/kossel_mini/Configuration.h @@ -1541,7 +1541,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/delta/Geeetech/G2/Configuration.h b/config/examples/delta/Geeetech/G2/Configuration.h index 0293ea1e8e..3023209317 100644 --- a/config/examples/delta/Geeetech/G2/Configuration.h +++ b/config/examples/delta/Geeetech/G2/Configuration.h @@ -1539,7 +1539,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/delta/Geeetech/G2Pro/Configuration.h b/config/examples/delta/Geeetech/G2Pro/Configuration.h index ce633b6c3d..1f7410093c 100644 --- a/config/examples/delta/Geeetech/G2Pro/Configuration.h +++ b/config/examples/delta/Geeetech/G2Pro/Configuration.h @@ -1539,7 +1539,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/delta/Geeetech/G2S/Configuration.h b/config/examples/delta/Geeetech/G2S/Configuration.h index 74a212ea0a..c06b07c54a 100644 --- a/config/examples/delta/Geeetech/G2S/Configuration.h +++ b/config/examples/delta/Geeetech/G2S/Configuration.h @@ -1539,7 +1539,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/delta/Geeetech/G2SPro/Configuration.h b/config/examples/delta/Geeetech/G2SPro/Configuration.h index 8578c3bc60..23ff81f503 100644 --- a/config/examples/delta/Geeetech/G2SPro/Configuration.h +++ b/config/examples/delta/Geeetech/G2SPro/Configuration.h @@ -1539,7 +1539,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration.h b/config/examples/delta/Geeetech/Rostock 301/Configuration.h index 5e9f11c5c7..742336b7e8 100644 --- a/config/examples/delta/Geeetech/Rostock 301/Configuration.h +++ b/config/examples/delta/Geeetech/Rostock 301/Configuration.h @@ -1539,7 +1539,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/delta/Hatchbox_Alpha/Configuration.h b/config/examples/delta/Hatchbox_Alpha/Configuration.h index 6871998f8b..7a4d5874a2 100644 --- a/config/examples/delta/Hatchbox_Alpha/Configuration.h +++ b/config/examples/delta/Hatchbox_Alpha/Configuration.h @@ -1544,7 +1544,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/delta/MKS/SBASE/Configuration.h b/config/examples/delta/MKS/SBASE/Configuration.h index ca41c13943..c6d8ad5951 100644 --- a/config/examples/delta/MKS/SBASE/Configuration.h +++ b/config/examples/delta/MKS/SBASE/Configuration.h @@ -1539,7 +1539,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/delta/Malyan M300/Configuration.h b/config/examples/delta/Malyan M300/Configuration.h index fadd4b237f..b2d6cdfa53 100644 --- a/config/examples/delta/Malyan M300/Configuration.h +++ b/config/examples/delta/Malyan M300/Configuration.h @@ -1532,7 +1532,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/delta/Tevo Little Monster/Configuration.h b/config/examples/delta/Tevo Little Monster/Configuration.h index 3a2bfb4c35..27e5c0f6f8 100644 --- a/config/examples/delta/Tevo Little Monster/Configuration.h +++ b/config/examples/delta/Tevo Little Monster/Configuration.h @@ -1540,7 +1540,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/delta/Velleman/K8800/Configuration.h b/config/examples/delta/Velleman/K8800/Configuration.h index c432951e03..e05d99dc41 100644 --- a/config/examples/delta/Velleman/K8800/Configuration.h +++ b/config/examples/delta/Velleman/K8800/Configuration.h @@ -1566,7 +1566,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/delta/generic/Configuration.h b/config/examples/delta/generic/Configuration.h index 180dc63fec..72e01540c5 100644 --- a/config/examples/delta/generic/Configuration.h +++ b/config/examples/delta/generic/Configuration.h @@ -1539,7 +1539,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/delta/kossel_clear/Configuration.h b/config/examples/delta/kossel_clear/Configuration.h index 498ccfdd59..b6f0f47c7e 100644 --- a/config/examples/delta/kossel_clear/Configuration.h +++ b/config/examples/delta/kossel_clear/Configuration.h @@ -1539,7 +1539,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/delta/kossel_mini/Configuration.h b/config/examples/delta/kossel_mini/Configuration.h index 07ecfbdfd5..88a04d2f84 100644 --- a/config/examples/delta/kossel_mini/Configuration.h +++ b/config/examples/delta/kossel_mini/Configuration.h @@ -1541,7 +1541,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/delta/kossel_pro/Configuration.h b/config/examples/delta/kossel_pro/Configuration.h index b095b7e30f..85338827e2 100644 --- a/config/examples/delta/kossel_pro/Configuration.h +++ b/config/examples/delta/kossel_pro/Configuration.h @@ -1555,7 +1555,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/delta/kossel_xl/Configuration.h b/config/examples/delta/kossel_xl/Configuration.h index 3bb0c978a4..35a0dbf394 100644 --- a/config/examples/delta/kossel_xl/Configuration.h +++ b/config/examples/delta/kossel_xl/Configuration.h @@ -1545,7 +1545,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/gCreate/gMax1.5+/Configuration.h b/config/examples/gCreate/gMax1.5+/Configuration.h index bf4949b60e..334e3cf878 100644 --- a/config/examples/gCreate/gMax1.5+/Configuration.h +++ b/config/examples/gCreate/gMax1.5+/Configuration.h @@ -1538,7 +1538,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration.h b/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration.h index b81d77d9c7..d89152ea2f 100644 --- a/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration.h +++ b/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration.h @@ -1543,7 +1543,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration.h b/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration.h index ba36d0fb5a..61fee0c5de 100644 --- a/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration.h +++ b/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration.h @@ -1518,7 +1518,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/makibox/Configuration.h b/config/examples/makibox/Configuration.h index a51a175e0e..a43a2a1158 100644 --- a/config/examples/makibox/Configuration.h +++ b/config/examples/makibox/Configuration.h @@ -1534,7 +1534,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset diff --git a/config/examples/tvrrug/Round2/Configuration.h b/config/examples/tvrrug/Round2/Configuration.h index 31eb0551ff..6bc8b9c935 100644 --- a/config/examples/tvrrug/Round2/Configuration.h +++ b/config/examples/tvrrug/Round2/Configuration.h @@ -1538,7 +1538,7 @@ * * Tune and Adjust * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. - * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. + * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset. * * Assuming the typical work area orientation: * - Probe to RIGHT of the Nozzle has a Positive X offset