3D-printing/Configurations
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Configurations.git synced 2025-08-07 14:04:19 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions

🐛 Fix Anycubic i3, i3 Mega

Browse source
This commit is contained in:
Scott Lahteine 2022-04-18 21:18:22 -05:00
parent 41eee7bf61
commit 87ce625d48
3 changed files with 3 additions and 3 deletions
Download patch file Download diff file Expand all files Collapse all files

2
config/examples/AnyCubic/i3 Mega/Configuration.h
View file

@ -3029,7 +3029,7 @@
// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency
// which is not as annoying as with the hardware PWM. On the other hand, if this frequency
// is too low, you should also increment SOFT_PWM_SCALE.
//#define FAN_SOFT_PWM
#define FAN_SOFT_PWM
// Incrementing this by 1 will double the software PWM frequency,
// affecting heaters, and the fan if FAN_SOFT_PWM is enabled.

2
config/examples/AnyCubic/i3 Mega/Configuration_adv.h
View file

@ -516,7 +516,7 @@
*/
#define USE_CONTROLLER_FAN
#if ENABLED(USE_CONTROLLER_FAN)
#define CONTROLLER_FAN_PIN TG_FAN1_PIN // Set a custom pin for the controller fan
#define CONTROLLER_FAN_PIN 7 // Set a custom pin for the controller fan
//#define CONTROLLER_FAN_USE_Z_ONLY // With this option only the Z axis is considered
//#define CONTROLLER_FAN_IGNORE_Z // Ignore Z stepper. Useful when stepper timeout is disabled.
#define CONTROLLERFAN_SPEED_MIN 0 // (0-255) Minimum speed. (If set below this value the fan is turned off.)

2
config/examples/AnyCubic/i3/Configuration_adv.h
View file

@ -613,7 +613,7 @@
* Multiple extruders can be assigned to the same pin in which case
* the fan will turn on when any selected extruder is above the threshold.
*/
#define E0_AUTO_FAN_PIN TG_FAN2_PIN
#define E0_AUTO_FAN_PIN 44
#define E1_AUTO_FAN_PIN -1
#define E2_AUTO_FAN_PIN -1
#define E3_AUTO_FAN_PIN -1