✨ PROBING_TOOL

MarlinFirmware/Marlin#24411

config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h

@@ -1618,6 +1618,12 @@
   #define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0 }
 #endif
 
+// Enable and set to use a specific tool for probing. Disable to allow any tool.
+#define PROBING_TOOL 0
+#ifdef PROBING_TOOL
+  //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
+#endif
+
 // Most probes should stay away from the edges of the bed, but
 // with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10

config/examples/delta/Anycubic/Kossel/Configuration.h

@@ -1623,6 +1623,12 @@
   #define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0 }
 #endif
 
+// Enable and set to use a specific tool for probing. Disable to allow any tool.
+#define PROBING_TOOL 0
+#ifdef PROBING_TOOL
+  //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
+#endif
+
 // Most probes should stay away from the edges of the bed, but
 // with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 15

config/examples/delta/Anycubic/Predator/Configuration.h

@@ -1565,6 +1565,12 @@
  */
 #define NOZZLE_TO_PROBE_OFFSET { 0, 0, -16.30 }
 
+// Enable and set to use a specific tool for probing. Disable to allow any tool.
+#define PROBING_TOOL 0
+#ifdef PROBING_TOOL
+  //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
+#endif
+
 // Most probes should stay away from the edges of the bed, but
 // with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10

config/examples/delta/Dreammaker/Overlord/Configuration.h

@@ -1564,6 +1564,12 @@
  */
 #define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0.65 }
 
+// Enable and set to use a specific tool for probing. Disable to allow any tool.
+#define PROBING_TOOL 0
+#ifdef PROBING_TOOL
+  //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
+#endif
+
 // Most probes should stay away from the edges of the bed, but
 // with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 5

config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h

@@ -1571,6 +1571,12 @@
  */
 #define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0.65 }
 
+// Enable and set to use a specific tool for probing. Disable to allow any tool.
+#define PROBING_TOOL 0
+#ifdef PROBING_TOOL
+  //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
+#endif
+
 // Most probes should stay away from the edges of the bed, but
 // with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 5

config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h

@@ -1566,6 +1566,12 @@
  */
 #define NOZZLE_TO_PROBE_OFFSET { 0, 0, -19.42 }
 
+// Enable and set to use a specific tool for probing. Disable to allow any tool.
+#define PROBING_TOOL 0
+#ifdef PROBING_TOOL
+  //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
+#endif
+
 // Most probes should stay away from the edges of the bed, but
 // with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 15

config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h

@@ -1564,6 +1564,12 @@
  */
 #define NOZZLE_TO_PROBE_OFFSET { 0, 0, -18.0 }
 
+// Enable and set to use a specific tool for probing. Disable to allow any tool.
+#define PROBING_TOOL 0
+#ifdef PROBING_TOOL
+  //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
+#endif
+
 // Most probes should stay away from the edges of the bed, but
 // with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 20

config/examples/delta/FLSUN/QQ-S/Configuration.h

@@ -1565,6 +1565,12 @@
  */
 #define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0 }
 
+// Enable and set to use a specific tool for probing. Disable to allow any tool.
+#define PROBING_TOOL 0
+#ifdef PROBING_TOOL
+  //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
+#endif
+
 // Most probes should stay away from the edges of the bed, but
 // with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 20

config/examples/delta/FLSUN/QQS-Pro/Configuration.h

@@ -1565,6 +1565,12 @@
  */
 #define NOZZLE_TO_PROBE_OFFSET { 0, 0, -16.2 }
 
+// Enable and set to use a specific tool for probing. Disable to allow any tool.
+#define PROBING_TOOL 0
+#ifdef PROBING_TOOL
+  //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
+#endif
+
 // Most probes should stay away from the edges of the bed, but
 // with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 15

config/examples/delta/FLSUN/auto_calibrate/Configuration.h

@@ -1568,6 +1568,12 @@
  */
 #define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0.10 }
 
+// Enable and set to use a specific tool for probing. Disable to allow any tool.
+#define PROBING_TOOL 0
+#ifdef PROBING_TOOL
+  //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
+#endif
+
 // Most probes should stay away from the edges of the bed, but
 // with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 20

config/examples/delta/FLSUN/kossel/Configuration.h

@@ -1567,6 +1567,12 @@
  */
 #define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0.10 }
 
+// Enable and set to use a specific tool for probing. Disable to allow any tool.
+#define PROBING_TOOL 0
+#ifdef PROBING_TOOL
+  //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
+#endif
+
 // Most probes should stay away from the edges of the bed, but
 // with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 20

config/examples/delta/FLSUN/kossel_mini/Configuration.h

@@ -1567,6 +1567,12 @@
  */
 #define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0.25 }
 
+// Enable and set to use a specific tool for probing. Disable to allow any tool.
+#define PROBING_TOOL 0
+#ifdef PROBING_TOOL
+  //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
+#endif
+
 // Most probes should stay away from the edges of the bed, but
 // with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10

config/examples/delta/Geeetech/G2/Configuration.h

@@ -1565,6 +1565,12 @@
  */
 #define NOZZLE_TO_PROBE_OFFSET { 19, -11, -2 } // G2 { 19, -11, -2 }
 
+// Enable and set to use a specific tool for probing. Disable to allow any tool.
+#define PROBING_TOOL 0
+#ifdef PROBING_TOOL
+  //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
+#endif
+
 // Most probes should stay away from the edges of the bed, but
 // with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 1

config/examples/delta/Geeetech/G2Pro/Configuration.h

@@ -1565,6 +1565,12 @@
  */
 #define NOZZLE_TO_PROBE_OFFSET { -19, -11, -2 } // G2 { 19, -11, -2 }
 
+// Enable and set to use a specific tool for probing. Disable to allow any tool.
+#define PROBING_TOOL 0
+#ifdef PROBING_TOOL
+  //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
+#endif
+
 // Most probes should stay away from the edges of the bed, but
 // with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 1

config/examples/delta/Geeetech/G2S/Configuration.h

@@ -1565,6 +1565,12 @@
  */
 #define NOZZLE_TO_PROBE_OFFSET { 19, -11, -2 } // G2 { 19, -11, -2 }
 
+// Enable and set to use a specific tool for probing. Disable to allow any tool.
+#define PROBING_TOOL 0
+#ifdef PROBING_TOOL
+  //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
+#endif
+
 // Most probes should stay away from the edges of the bed, but
 // with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 1

config/examples/delta/Geeetech/G2SPro/Configuration.h

@@ -1565,6 +1565,12 @@
  */
 #define NOZZLE_TO_PROBE_OFFSET { 19, -11, -2 } // G2 { 19, -11, -2 }
 
+// Enable and set to use a specific tool for probing. Disable to allow any tool.
+#define PROBING_TOOL 0
+#ifdef PROBING_TOOL
+  //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
+#endif
+
 // Most probes should stay away from the edges of the bed, but
 // with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 1

config/examples/delta/Geeetech/Rostock 301/Configuration.h

@@ -1565,6 +1565,12 @@
  */
 #define NOZZLE_TO_PROBE_OFFSET { 0, -10, -3.5 }
 
+// Enable and set to use a specific tool for probing. Disable to allow any tool.
+#define PROBING_TOOL 0
+#ifdef PROBING_TOOL
+  //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
+#endif
+
 // Most probes should stay away from the edges of the bed, but
 // with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10

config/examples/delta/Hatchbox_Alpha/Configuration.h

@@ -1570,6 +1570,12 @@
  */
 #define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0 }
 
+// Enable and set to use a specific tool for probing. Disable to allow any tool.
+#define PROBING_TOOL 0
+#ifdef PROBING_TOOL
+  //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
+#endif
+
 // Most probes should stay away from the edges of the bed, but
 // with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10

config/examples/delta/MKS/SBASE/Configuration.h

@@ -1565,6 +1565,12 @@
  */
 #define NOZZLE_TO_PROBE_OFFSET { 0, -10, -3.5 }
 
+// Enable and set to use a specific tool for probing. Disable to allow any tool.
+#define PROBING_TOOL 0
+#ifdef PROBING_TOOL
+  //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
+#endif
+
 // Most probes should stay away from the edges of the bed, but
 // with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10

config/examples/delta/Malyan M300/Configuration.h

@@ -1560,6 +1560,12 @@
  */
 #define NOZZLE_TO_PROBE_OFFSET { 0, 0, -0.3 } // Account for switches travel
 
+// Enable and set to use a specific tool for probing. Disable to allow any tool.
+#define PROBING_TOOL 0
+#ifdef PROBING_TOOL
+  //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
+#endif
+
 // Most probes should stay away from the edges of the bed, but
 // with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 55.0

config/examples/delta/Tevo Little Monster/Configuration.h

@@ -1566,6 +1566,12 @@
  */
 #define NOZZLE_TO_PROBE_OFFSET { 20, -10, -1.05 }
 
+// Enable and set to use a specific tool for probing. Disable to allow any tool.
+#define PROBING_TOOL 0
+#ifdef PROBING_TOOL
+  //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
+#endif
+
 // Most probes should stay away from the edges of the bed, but
 // with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10

config/examples/delta/Velleman/K8800/Configuration.h

@@ -1592,6 +1592,12 @@
  */
 #define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0 }
 
+// Enable and set to use a specific tool for probing. Disable to allow any tool.
+#define PROBING_TOOL 0
+#ifdef PROBING_TOOL
+  //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
+#endif
+
 // Most probes should stay away from the edges of the bed, but
 // with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 15

config/examples/delta/generic/Configuration.h

@@ -1565,6 +1565,12 @@
  */
 #define NOZZLE_TO_PROBE_OFFSET { 0, -10, -3.5 }
 
+// Enable and set to use a specific tool for probing. Disable to allow any tool.
+#define PROBING_TOOL 0
+#ifdef PROBING_TOOL
+  //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
+#endif
+
 // Most probes should stay away from the edges of the bed, but
 // with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10

config/examples/delta/kossel_clear/Configuration.h

@@ -1566,6 +1566,12 @@
  // BL Touch with John Ecker Custom Mount
 #define NOZZLE_TO_PROBE_OFFSET { 0, -29, -3.4 }
 
+// Enable and set to use a specific tool for probing. Disable to allow any tool.
+#define PROBING_TOOL 0
+#ifdef PROBING_TOOL
+  //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
+#endif
+
 // Most probes should stay away from the edges of the bed, but
 // with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 1

config/examples/delta/kossel_mini/Configuration.h

@@ -1567,6 +1567,12 @@
  */
 #define NOZZLE_TO_PROBE_OFFSET { 0, -10, -3.5 }
 
+// Enable and set to use a specific tool for probing. Disable to allow any tool.
+#define PROBING_TOOL 0
+#ifdef PROBING_TOOL
+  //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
+#endif
+
 // Most probes should stay away from the edges of the bed, but
 // with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10

config/examples/delta/kossel_pro/Configuration.h

@@ -1585,6 +1585,12 @@
  * not giving someone a head crash. Use something like G29 Z-0.2 to adjust as needed.
  */
 
+// Enable and set to use a specific tool for probing. Disable to allow any tool.
+#define PROBING_TOOL 0
+#ifdef PROBING_TOOL
+  //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
+#endif
+
 // Most probes should stay away from the edges of the bed, but
 // with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10

config/examples/delta/kossel_xl/Configuration.h

@@ -1571,6 +1571,12 @@
  */
 #define NOZZLE_TO_PROBE_OFFSET { 0.0, 0.0, 0.3 }
 
+// Enable and set to use a specific tool for probing. Disable to allow any tool.
+#define PROBING_TOOL 0
+#ifdef PROBING_TOOL
+  //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
+#endif
+
 // Most probes should stay away from the edges of the bed, but
 // with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10