Allow zero EXTRUDERS

config/default/Configuration.h

@@ -141,7 +141,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/3DFabXYZ/Migbot/Configuration.h

@@ -144,7 +144,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/ADIMLab/Gantry v1/Configuration.h

@@ -143,7 +143,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/ADIMLab/Gantry v2/Configuration.h

@@ -143,7 +143,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/AlephObjects/TAZ4/Configuration.h

@@ -143,7 +143,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/Alfawise/U20-bltouch/Configuration.h

@@ -181,7 +181,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/Alfawise/U20/Configuration.h

@@ -181,7 +181,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/AliExpress/CL-260/Configuration.h

@@ -143,7 +143,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/AliExpress/UM2pExt/Configuration.h

@@ -143,7 +143,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 2
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/Anet/A2/Configuration.h

@@ -143,7 +143,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/Anet/A2plus/Configuration.h

@@ -143,7 +143,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/Anet/A6/Configuration.h

@@ -143,7 +143,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 1
 
 // The Anet A6 original extruder is designed for 1.75mm

config/examples/Anet/A8/Configuration.h

@@ -143,7 +143,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/Anet/A8plus/Configuration.h

@@ -143,7 +143,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/Anet/E10/Configuration.h

@@ -143,7 +143,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/Anet/E16/Configuration.h

@@ -143,7 +143,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/AnyCubic/Mega Zero/Configuration.h

@@ -144,7 +144,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/AnyCubic/i3 Mega/Configuration.h

@@ -146,7 +146,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/AnyCubic/i3/Configuration.h

@@ -143,7 +143,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/ArmEd/Configuration.h

@@ -143,7 +143,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/Artillery/Genius/Configuration.h

@@ -143,7 +143,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/Artillery/Sidewinder X1/Configuration.h

@@ -143,7 +143,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration.h

@@ -143,7 +143,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/Azteeg/X5GT/Configuration.h

@@ -143,7 +143,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 2
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/BIBO/TouchX/cyclops/Configuration.h

@@ -143,7 +143,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 2
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/BIBO/TouchX/default/Configuration.h

@@ -143,7 +143,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 2
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/BQ/Hephestos/Configuration.h

@@ -143,7 +143,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/BQ/Hephestos_2/Configuration.h

@@ -151,7 +151,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/BQ/WITBOX/Configuration.h

@@ -143,7 +143,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h

@@ -143,7 +143,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/Cartesio/Configuration.h

@@ -144,7 +144,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 3
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/Copymaster3D/300/Configuration.h

@@ -143,7 +143,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/Copymaster3D/400/Configuration.h

@@ -143,7 +143,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/Copymaster3D/500/Configuration.h

@@ -143,7 +143,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/Creality/CR-10 V2/Configuration.h

@@ -150,7 +150,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/Creality/CR-10/Configuration.h

@@ -143,7 +143,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/Creality/CR-10S/Configuration.h

@@ -143,7 +143,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/Creality/CR-10_5S/Configuration.h

@@ -143,7 +143,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/Creality/CR-10mini/CrealityV1/Configuration.h

@@ -152,7 +152,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/Creality/CR-10mini/MEEB-3DP/Configuration.h

@@ -143,7 +143,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/Creality/CR-20 Pro/Configuration.h

@@ -143,7 +143,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/Creality/CR-20/Configuration.h

@@ -143,7 +143,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/Creality/CR-8/Configuration.h

@@ -143,7 +143,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/Creality/Ender-2/Configuration.h

@@ -143,7 +143,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/Creality/Ender-3 Pro V1.5/Configuration.h

@@ -143,7 +143,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/Creality/Ender-3 Pro/Configuration.h

@@ -143,7 +143,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/Creality/Ender-3 V2/Configuration.h

@@ -143,7 +143,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h

@@ -143,7 +143,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h

@@ -143,7 +143,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h

@@ -143,7 +143,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/Creality/Ender-3/CrealityV1/Configuration.h

@@ -143,7 +143,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h

@@ -143,7 +143,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h

@@ -143,7 +143,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h

@@ -143,7 +143,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h

@@ -143,7 +143,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h

@@ -143,7 +143,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/Creality/Ender-4/Configuration.h

@@ -143,7 +143,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/Creality/Ender-5 Pro/Configuration.h

@@ -143,7 +143,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo/Configuration.h

@@ -154,7 +154,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h

@@ -143,7 +143,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/Creality/Ender-5/Creality/Configuration.h

@@ -143,7 +143,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/Creality/Ender-5_Plus/Configuration.h

@@ -145,7 +145,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/Dagoma/Disco Ultimate/Configuration.h

@@ -143,7 +143,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/Daycom/3DP-100/Configuration.h

@@ -145,7 +145,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/EXP3D/Imprimante multifonction/Configuration.h

@@ -143,7 +143,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/Einstart-S/Configuration.h

@@ -143,7 +143,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/FYSETC/AIO_II/Configuration.h

@@ -143,7 +143,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/FYSETC/F6_13/Configuration.h

@@ -145,7 +145,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/FYSETC/S6/Configuration.h

@@ -143,7 +143,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/Felix/DUAL/Configuration.h

@@ -143,7 +143,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 2
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/Felix/Single/Configuration.h

@@ -143,7 +143,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/FlashForge/Creator 2X/Configuration.h

@@ -143,7 +143,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 2
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/FlashForge/CreatorPro/Configuration.h

@@ -143,7 +143,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 2
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/FlyingBear/P905H/Configuration.h

@@ -143,7 +143,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/FolgerTech/i3-2020/Configuration.h

@@ -143,7 +143,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/Formbot/Raptor/Configuration.h

@@ -184,7 +184,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/Formbot/T_Rex_2+/Configuration.h

@@ -143,7 +143,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 2
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/Formbot/T_Rex_3/Configuration.h

@@ -147,7 +147,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 2
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/Geeetech/A10/Configuration.h

@@ -143,7 +143,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/Geeetech/A10D/Configuration.h

@@ -143,7 +143,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 2
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/Geeetech/A10M/Configuration.h

@@ -143,7 +143,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/Geeetech/A10T/Configuration.h

@@ -143,7 +143,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/Geeetech/A20/Configuration.h

@@ -143,7 +143,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/Geeetech/A20M/Configuration.h

@@ -143,7 +143,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/Geeetech/A20T/Configuration.h

@@ -143,7 +143,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/Geeetech/A30/Configuration.h

@@ -143,7 +143,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/Geeetech/D200/Configuration.h

@@ -143,7 +143,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/Geeetech/Duplicator5/Configuration.h

@@ -143,7 +143,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 2
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/Geeetech/E180/Configuration.h

@@ -143,7 +143,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/Geeetech/GT2560/Configuration.h

@@ -143,7 +143,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h

@@ -143,7 +143,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/Geeetech/M201/Configuration.h

@@ -143,7 +143,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/Geeetech/MeCreator2/Configuration.h

@@ -143,7 +143,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/Geeetech/Me_creator/Configuration.h

@@ -143,7 +143,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/Geeetech/Me_ducer/Configuration.h

@@ -143,7 +143,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/Geeetech/PI3A PRO/Configuration.h

@@ -143,7 +143,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h

@@ -143,7 +143,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h

@@ -143,7 +143,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/Geeetech/Prusa i3 Pro C/Configuration.h

@@ -143,7 +143,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 2
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.

config/examples/Geeetech/Prusa i3 Pro W/Configuration.h

@@ -143,7 +143,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.