mirror of
https://github.com/MarlinFirmware/Configurations.git
synced 2025-08-08 14:34:07 -06:00
🚸 Fix Elegoo Neptune, add USB Modification Instructions (#802)
This commit is contained in:
EvilGremlin
GitHub
parent
539024e537
commit
82c33d401c
7 changed files with 186 additions and 163 deletions
|
|
@ -39,6 +39,17 @@
|
|||
*/
|
||||
#define CONFIGURATION_H_VERSION 02010100
|
||||
|
||||
/**
|
||||
* @section custom
|
||||
* Custom switches (to avoid multiplying configurations).
|
||||
* See README.md for details.
|
||||
*/
|
||||
//#define IS_BOARD_1_3 // Enable for board v1.3
|
||||
//#define IS_2D // Enable for the Neptune 2d (Dual extruder)
|
||||
//#define IS_BMG // Enable for installed BMG-like extruder
|
||||
//#define USB_MOD // Enable if you've applied the Native USB mods (see README.md)
|
||||
#define FIRMWARE_BIN elegoo.bin // Override the firmware binary output filename
|
||||
|
||||
//===========================================================================
|
||||
//============================= Getting Started =============================
|
||||
//===========================================================================
|
||||
|
|
@ -62,28 +73,9 @@
|
|||
// @section info
|
||||
|
||||
// Author info of this build printed to the host during boot and M115
|
||||
#define STRING_CONFIG_H_AUTHOR "(just-trey, Elegoo Neptune 2)" // Who made the changes.
|
||||
#define STRING_CONFIG_H_AUTHOR "(just-trey, EvilGremlin)" // Who made the changes.
|
||||
//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes)
|
||||
|
||||
// @section custom
|
||||
/**
|
||||
* Consolidated list of overrides that are not required in this file. They either simplify
|
||||
* managing multiple configurations or override values specified in other files.
|
||||
*/
|
||||
|
||||
// MAIN CONFIGURATION SWITCHES FOR FEATURES - see README.md for more details.
|
||||
|
||||
#define IS_BOARD_1_3 true // true if you have the 1.3 board, false for 1.2 board
|
||||
#define HAS_BLTOUCH false // true if you have a BlTouch or clone
|
||||
#define IS_2D false // true if you have a Neptuen 2d (Dual extruder)
|
||||
|
||||
// Define missing pins
|
||||
#define MT_DET_PIN_STATE LOW
|
||||
|
||||
// Define firmware output name
|
||||
// - NOTE: only works on 1.2 board - manual remene to elegoo.bin is needed for 1.3 board
|
||||
#define FIRMWARE_BIN elegoo.bin
|
||||
|
||||
/**
|
||||
* *** VENDORS PLEASE READ ***
|
||||
*
|
||||
|
|
@ -108,10 +100,11 @@
|
|||
|
||||
// Choose the name from boards.h that matches your setup
|
||||
// NOTE for platformio.ini:
|
||||
// For ZNP Robin Nano 1.2 - set default_envs = mks_robin_nano35
|
||||
// For ZNP Robin Nano 1.3 - default_envs = mks_robin_nano_v1_3_f4
|
||||
// For ZNP Robin Nano 1.2 - set `default_envs = mks_robin_nano_v1v2`
|
||||
// For ZNP Robin Nano 1.3 - set `default_envs = mks_robin_nano_v1_3_f4`
|
||||
|
||||
#ifndef MOTHERBOARD
|
||||
#if (IS_BOARD_1_3)
|
||||
#ifdef IS_BOARD_1_3
|
||||
#define MOTHERBOARD BOARD_MKS_ROBIN_NANO_V1_3_F4
|
||||
#else
|
||||
#define MOTHERBOARD BOARD_MKS_ROBIN_NANO
|
||||
|
|
@ -126,7 +119,11 @@
|
|||
*
|
||||
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
#define SERIAL_PORT 3
|
||||
#ifdef USB_MOD
|
||||
#define SERIAL_PORT -1
|
||||
#else
|
||||
#define SERIAL_PORT 3
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Serial Port Baud Rate
|
||||
|
|
@ -139,16 +136,16 @@
|
|||
*
|
||||
* :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
|
||||
*/
|
||||
#define BAUDRATE 115200 // See https://github.com/MarlinFirmware/Marlin/issues/12174
|
||||
#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate
|
||||
#define BAUDRATE 115200
|
||||
//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate
|
||||
|
||||
/**
|
||||
* Select a secondary serial port on the board to use for communication with the host.
|
||||
* Currently Ethernet (-2) is only supported on Teensy 4.1 boards.
|
||||
* :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
//#define SERIAL_PORT_2 -1
|
||||
//#define BAUDRATE_2 250000 // :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] Enable to override BAUDRATE
|
||||
//#define SERIAL_PORT_2 1
|
||||
//#define BAUDRATE_2 115200 // :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] Enable to override BAUDRATE
|
||||
|
||||
/**
|
||||
* Select a third serial port on the board to use for communication with the host.
|
||||
|
|
@ -258,9 +255,8 @@
|
|||
|
||||
// This defines the number of extruders
|
||||
// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
|
||||
#if IS_2D
|
||||
#ifdef IS_2D
|
||||
#define EXTRUDERS 2
|
||||
#define SINGLENOZZLE
|
||||
#else
|
||||
#define EXTRUDERS 1
|
||||
#endif
|
||||
|
|
@ -269,7 +265,9 @@
|
|||
#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75
|
||||
|
||||
// For Cyclops or any "multi-extruder" that shares a single nozzle.
|
||||
//#define SINGLENOZZLE
|
||||
#ifdef IS_2D
|
||||
#define SINGLENOZZLE
|
||||
#endif
|
||||
|
||||
// Save and restore temperature and fan speed on tool-change.
|
||||
// Set standby for the unselected tool with M104/106/109 T...
|
||||
|
|
@ -601,15 +599,15 @@
|
|||
#endif
|
||||
|
||||
#if HAS_E_TEMP_SENSOR
|
||||
#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109
|
||||
#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
|
||||
#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
|
||||
#define TEMP_RESIDENCY_TIME 3 // (seconds) Time to wait for hotend to "settle" in M109
|
||||
#define TEMP_WINDOW 10 // (°C) Temperature proximity for the "temperature reached" timer
|
||||
#define TEMP_HYSTERESIS 10 // (°C) Temperature proximity considered "close enough" to the target
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_BED
|
||||
#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190
|
||||
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
|
||||
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
|
||||
#define TEMP_BED_RESIDENCY_TIME 3 // (seconds) Time to wait for bed to "settle" in M190
|
||||
#define TEMP_BED_WINDOW 10 // (°C) Temperature proximity for the "temperature reached" timer
|
||||
#define TEMP_BED_HYSTERESIS 10 // (°C) Temperature proximity considered "close enough" to the target
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_CHAMBER
|
||||
|
|
@ -764,6 +762,7 @@
|
|||
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W
|
||||
* heater. If your configuration is significantly different than this and you don't understand
|
||||
* the issues involved, don't use bed PID until someone else verifies that your hardware works.
|
||||
* @section bed temp
|
||||
*/
|
||||
#define PIDTEMPBED
|
||||
|
||||
|
|
@ -857,14 +856,14 @@
|
|||
* *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! ***
|
||||
*/
|
||||
#define PREVENT_COLD_EXTRUSION
|
||||
#define EXTRUDE_MINTEMP 180
|
||||
#define EXTRUDE_MINTEMP 170
|
||||
|
||||
/**
|
||||
* Prevent a single extrusion longer than EXTRUDE_MAXLENGTH.
|
||||
* Note: For Bowden Extruders make this large enough to allow load/unload.
|
||||
*/
|
||||
#define PREVENT_LENGTHY_EXTRUDE
|
||||
#define EXTRUDE_MAXLENGTH 200
|
||||
#define EXTRUDE_MAXLENGTH 400
|
||||
|
||||
//===========================================================================
|
||||
//======================== Thermal Runaway Protection =======================
|
||||
|
|
@ -1147,19 +1146,15 @@
|
|||
#define V_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
||||
#define W_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
||||
#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
||||
#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop.
|
||||
#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop.
|
||||
#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
||||
#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
||||
#define I_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
||||
#define J_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
||||
#define K_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
||||
#define U_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
||||
#define V_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
||||
#define W_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
||||
#if HAS_BLTOUCH
|
||||
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe.
|
||||
#else
|
||||
#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe.
|
||||
#endif
|
||||
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe.
|
||||
|
||||
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
||||
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
||||
|
|
@ -1200,7 +1195,7 @@
|
|||
* following movement settings. If fewer factors are given than the
|
||||
* total number of extruders, the last value applies to the rest.
|
||||
*/
|
||||
#if IS_2D
|
||||
#ifdef IS_2D
|
||||
#define DISTINCT_E_FACTORS
|
||||
#endif
|
||||
|
||||
|
|
@ -1209,26 +1204,36 @@
|
|||
* Override with M92
|
||||
* X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
|
||||
*/
|
||||
#if IS_2D
|
||||
#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 95, 95 }
|
||||
|
||||
#ifdef IS_BMG
|
||||
#ifdef IS_2D
|
||||
#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 415, 415 }
|
||||
#else
|
||||
#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 415 }
|
||||
#endif
|
||||
#else
|
||||
#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 133 }
|
||||
#ifdef IS_2D
|
||||
#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 95, 95 }
|
||||
#else
|
||||
#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 95 }
|
||||
#endif
|
||||
#endif
|
||||
|
||||
|
||||
/**
|
||||
* Default Max Feed Rate (linear=mm/s, rotational=°/s)
|
||||
* Override with M203
|
||||
* X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
|
||||
*/
|
||||
#if IS_2D
|
||||
#define DEFAULT_MAX_FEEDRATE { 150, 150, 3, 70, 70 }
|
||||
#ifdef IS_2D
|
||||
#define DEFAULT_MAX_FEEDRATE { 150, 150, 40, 70, 70 }
|
||||
#else
|
||||
#define DEFAULT_MAX_FEEDRATE { 150, 150, 3, 70 }
|
||||
#define DEFAULT_MAX_FEEDRATE { 150, 150, 40, 70 }
|
||||
#endif
|
||||
|
||||
//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2
|
||||
#if ENABLED(LIMITED_MAX_FR_EDITING)
|
||||
#define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits
|
||||
#define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 70, 100 } // ...or, set your own edit limits
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
|
@ -1237,7 +1242,7 @@
|
|||
* Override with M201
|
||||
* X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
|
||||
*/
|
||||
#define DEFAULT_MAX_ACCELERATION { 1000, 1000, 100, 1000 }
|
||||
#define DEFAULT_MAX_ACCELERATION { 2000, 2000, 100, 10000 }
|
||||
|
||||
//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2
|
||||
#if ENABLED(LIMITED_MAX_ACCEL_EDITING)
|
||||
|
|
@ -1270,7 +1275,7 @@
|
|||
* When changing speed and direction, if the difference is less than the
|
||||
* value set here, it may happen instantaneously.
|
||||
*/
|
||||
#define CLASSIC_JERK
|
||||
//#define CLASSIC_JERK
|
||||
#if ENABLED(CLASSIC_JERK)
|
||||
#define DEFAULT_XJERK 10.0
|
||||
#define DEFAULT_YJERK 10.0
|
||||
|
|
@ -1329,13 +1334,10 @@
|
|||
* The probe replaces the Z-MIN endstop and is used for Z homing.
|
||||
* (Automatically enables USE_PROBE_FOR_Z_HOMING.)
|
||||
*/
|
||||
#if HAS_BLTOUCH
|
||||
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
|
||||
// Force the use of the probe for Z-axis homing
|
||||
#define USE_PROBE_FOR_Z_HOMING
|
||||
#else
|
||||
#define PROBE_MANUALLY
|
||||
#endif
|
||||
//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
|
||||
|
||||
// Force the use of the probe for Z-axis homing
|
||||
//#define USE_PROBE_FOR_Z_HOMING
|
||||
|
||||
/**
|
||||
* Z_MIN_PROBE_PIN
|
||||
|
|
@ -1352,7 +1354,7 @@
|
|||
* - normally-closed switches to GND and D32.
|
||||
* - normally-open switches to 5V and D32.
|
||||
*/
|
||||
#define Z_MIN_PROBE_PIN PC4 // Z-MAX PIN FOR BOARD
|
||||
#define Z_MIN_PROBE_PIN Z_MAX_PIN // Z-MAX PIN FOR BOARD
|
||||
|
||||
/**
|
||||
* Probe Type
|
||||
|
|
@ -1389,9 +1391,7 @@
|
|||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
*/
|
||||
#if HAS_BLTOUCH
|
||||
#define BLTOUCH
|
||||
#endif
|
||||
//#define BLTOUCH
|
||||
|
||||
/**
|
||||
* MagLev V4 probe by MDD
|
||||
|
|
@ -1550,10 +1550,10 @@
|
|||
#define PROBING_MARGIN 20
|
||||
|
||||
// X and Y axis travel speed (mm/min) between probes
|
||||
#define XY_PROBE_FEEDRATE (4000)
|
||||
#define XY_PROBE_FEEDRATE (80*60)
|
||||
|
||||
// Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2)
|
||||
#define Z_PROBE_FEEDRATE_FAST (600)
|
||||
#define Z_PROBE_FEEDRATE_FAST (6*60)
|
||||
|
||||
// Feedrate (mm/min) for the "accurate" probe of each point
|
||||
#define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2)
|
||||
|
|
@ -1603,7 +1603,7 @@
|
|||
* A total of 2 does fast/slow probes with a weighted average.
|
||||
* A total of 3 or more adds more slow probes, taking the average.
|
||||
*/
|
||||
#define MULTIPLE_PROBING 2
|
||||
//#define MULTIPLE_PROBING 2
|
||||
//#define EXTRA_PROBING 1
|
||||
|
||||
/**
|
||||
|
|
@ -1629,7 +1629,7 @@
|
|||
|
||||
// For M851 give a range for adjusting the Z probe offset
|
||||
#define Z_PROBE_OFFSET_RANGE_MIN -20
|
||||
#define Z_PROBE_OFFSET_RANGE_MAX 65
|
||||
#define Z_PROBE_OFFSET_RANGE_MAX 20
|
||||
|
||||
// Enable the M48 repeatability test to test probe accuracy
|
||||
//#define Z_MIN_PROBE_REPEATABILITY_TEST
|
||||
|
|
@ -1725,7 +1725,7 @@
|
|||
// @section homing
|
||||
|
||||
//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed. Also enable HOME_AFTER_DEACTIVATE for extra safety.
|
||||
#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated. Also enable NO_MOTION_BEFORE_HOMING for extra safety.
|
||||
//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated. Also enable NO_MOTION_BEFORE_HOMING for extra safety.
|
||||
|
||||
/**
|
||||
* Set Z_IDLE_HEIGHT if the Z-Axis moves on its own when steppers are disabled.
|
||||
|
|
@ -1734,7 +1734,7 @@
|
|||
*/
|
||||
//#define Z_IDLE_HEIGHT Z_HOME_POS
|
||||
|
||||
#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ...
|
||||
#define Z_HOMING_HEIGHT 5 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ...
|
||||
// Be sure to have this much clearance over your Z_MAX_POS to prevent grinding.
|
||||
|
||||
//#define Z_AFTER_HOMING 10 // (mm) Height to move to after homing Z
|
||||
|
|
@ -1815,7 +1815,7 @@
|
|||
#endif
|
||||
|
||||
#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
|
||||
#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD
|
||||
#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
|
@ -1833,8 +1833,12 @@
|
|||
*/
|
||||
#define FILAMENT_RUNOUT_SENSOR
|
||||
#if ENABLED(FILAMENT_RUNOUT_SENSOR)
|
||||
#define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500.
|
||||
#if IS_2D
|
||||
#ifdef IS_BMG
|
||||
#define FIL_RUNOUT_ENABLED_DEFAULT false // Enable the sensor on startup. Override with M412 followed by M500.
|
||||
#else
|
||||
#define FIL_RUNOUT_ENABLED_DEFAULT true
|
||||
#endif
|
||||
#ifdef IS_2D
|
||||
#define NUM_RUNOUT_SENSORS 2 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each.
|
||||
#else
|
||||
#define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each.
|
||||
|
|
@ -1882,7 +1886,11 @@
|
|||
// Commands to execute on filament runout.
|
||||
// With multiple runout sensors use the %c placeholder for the current tool in commands (e.g., "M600 T%c")
|
||||
// NOTE: After 'M412 H1' the host handles filament runout and this script does not apply.
|
||||
#define FILAMENT_RUNOUT_SCRIPT "M600 T%c"
|
||||
#ifdef IS_2D
|
||||
#define FILAMENT_RUNOUT_SCRIPT "M600 T%c"
|
||||
#else
|
||||
#define FILAMENT_RUNOUT_SCRIPT "M600"
|
||||
#endif
|
||||
|
||||
// After a runout is detected, continue printing this length of filament
|
||||
// before executing the runout script. Useful for a sensor at the end of
|
||||
|
|
@ -1937,12 +1945,10 @@
|
|||
*/
|
||||
//#define AUTO_BED_LEVELING_3POINT
|
||||
//#define AUTO_BED_LEVELING_LINEAR
|
||||
//#define AUTO_BED_LEVELING_UBL
|
||||
#if HAS_BLTOUCH
|
||||
#define AUTO_BED_LEVELING_BILINEAR
|
||||
#else
|
||||
#define MESH_BED_LEVELING
|
||||
#endif
|
||||
//#define AUTO_BED_LEVELING_BILINEAR
|
||||
#define AUTO_BED_LEVELING_UBL
|
||||
//#define MESH_BED_LEVELING
|
||||
|
||||
/**
|
||||
* Normally G28 leaves leveling disabled on completion. Enable one of
|
||||
* these options to restore the prior leveling state or to always enable
|
||||
|
|
@ -1956,7 +1962,7 @@
|
|||
*/
|
||||
//#define PREHEAT_BEFORE_LEVELING
|
||||
#if ENABLED(PREHEAT_BEFORE_LEVELING)
|
||||
#define LEVELING_NOZZLE_TEMP 180 // (°C) Only applies to E0 at this time
|
||||
#define LEVELING_NOZZLE_TEMP 120 // (°C) Only applies to E0 at this time
|
||||
#define LEVELING_BED_TEMP 50
|
||||
#endif
|
||||
|
||||
|
|
@ -2015,7 +2021,7 @@
|
|||
#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
|
||||
|
||||
// Set the number of grid points per dimension.
|
||||
#define GRID_MAX_POINTS_X 5
|
||||
#define GRID_MAX_POINTS_X 3
|
||||
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
||||
|
||||
// Probe along the Y axis, advancing X after each column
|
||||
|
|
@ -2025,7 +2031,7 @@
|
|||
|
||||
// Beyond the probed grid, continue the implied tilt?
|
||||
// Default is to maintain the height of the nearest edge.
|
||||
#define EXTRAPOLATE_BEYOND_GRID
|
||||
//#define EXTRAPOLATE_BEYOND_GRID
|
||||
|
||||
//
|
||||
// Experimental Subdivision of the grid by Catmull-Rom method.
|
||||
|
|
@ -2048,7 +2054,7 @@
|
|||
//#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh
|
||||
|
||||
#define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed
|
||||
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
|
||||
#define GRID_MAX_POINTS_X 5 // Don't use more than 15 points per axis, implementation limited.
|
||||
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
||||
|
||||
//#define UBL_HILBERT_CURVE // Use Hilbert distribution for less travel when probing multiple points
|
||||
|
|
@ -2059,7 +2065,7 @@
|
|||
//#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used
|
||||
// as the Z-Height correction value.
|
||||
|
||||
//#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh
|
||||
#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh
|
||||
|
||||
#elif ENABLED(MESH_BED_LEVELING)
|
||||
|
||||
|
|
@ -2067,7 +2073,7 @@
|
|||
//=================================== Mesh ==================================
|
||||
//===========================================================================
|
||||
|
||||
#define MESH_INSET 20 // Set Mesh bounds as an inset region of the bed
|
||||
#define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed
|
||||
#define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited.
|
||||
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
||||
|
||||
|
|
@ -2091,9 +2097,9 @@
|
|||
#define LCD_BED_TRAMMING
|
||||
|
||||
#if ENABLED(LCD_BED_TRAMMING)
|
||||
#define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets
|
||||
#define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points
|
||||
#define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points
|
||||
#define BED_TRAMMING_INSET_LFRB { 33, 33, 33, 33 } // (mm) Left, Front, Right, Back insets
|
||||
#define BED_TRAMMING_HEIGHT 0.2 // (mm) Z height of nozzle at leveling points
|
||||
#define BED_TRAMMING_Z_HOP 2 // (mm) Z height of nozzle between leveling points
|
||||
#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner
|
||||
//#define BED_TRAMMING_USE_PROBE
|
||||
#if ENABLED(BED_TRAMMING_USE_PROBE)
|
||||
|
|
@ -2126,8 +2132,7 @@
|
|||
* Commands to execute at the end of G29 probing.
|
||||
* Useful to retract or move the Z probe out of the way.
|
||||
*/
|
||||
// Move to allow screen access
|
||||
#define Z_PROBE_END_SCRIPT "G0 X113 F2400\nG0 Y113 F2400\nG0 Z10 F600"
|
||||
#define Z_PROBE_END_SCRIPT "G1 X0 Y113 Z10 F2400"
|
||||
|
||||
// @section homing
|
||||
|
||||
|
|
@ -2153,7 +2158,7 @@
|
|||
* - Allows Z homing only when XY positions are known and trusted.
|
||||
* - If stepper drivers sleep, XY homing may be required again before Z homing.
|
||||
*/
|
||||
#if HAS_BLTOUCH
|
||||
#ifdef BLTOUCH
|
||||
#define Z_SAFE_HOMING
|
||||
#endif
|
||||
|
||||
|
|
@ -2242,12 +2247,12 @@
|
|||
* M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.)
|
||||
*/
|
||||
#define EEPROM_SETTINGS // Persistent storage with M500 and M501
|
||||
//#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release!
|
||||
#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release!
|
||||
#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
|
||||
#define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load
|
||||
#if ENABLED(EEPROM_SETTINGS)
|
||||
//#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors.
|
||||
#define EEPROM_INIT_NOW // Init EEPROM on first boot after a new build.
|
||||
//#define EEPROM_INIT_NOW // Init EEPROM on first boot after a new build.
|
||||
#endif
|
||||
|
||||
// @section host
|
||||
|
|
@ -2281,19 +2286,19 @@
|
|||
//
|
||||
#define PREHEAT_1_LABEL "PLA"
|
||||
#define PREHEAT_1_TEMP_HOTEND 200
|
||||
#define PREHEAT_1_TEMP_BED 50
|
||||
#define PREHEAT_1_TEMP_BED 55
|
||||
#define PREHEAT_1_TEMP_CHAMBER 35
|
||||
#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255
|
||||
|
||||
#define PREHEAT_2_LABEL "PETG"
|
||||
#define PREHEAT_2_TEMP_HOTEND 230
|
||||
#define PREHEAT_2_TEMP_HOTEND 235
|
||||
#define PREHEAT_2_TEMP_BED 75
|
||||
#define PREHEAT_2_TEMP_CHAMBER 35
|
||||
#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
|
||||
|
||||
#define PREHEAT_3_LABEL "ABS"
|
||||
#define PREHEAT_3_TEMP_HOTEND 240
|
||||
#define PREHEAT_3_TEMP_BED 90
|
||||
#define PREHEAT_3_TEMP_HOTEND 240
|
||||
#define PREHEAT_3_TEMP_BED 90
|
||||
#define PREHEAT_3_TEMP_CHAMBER 35
|
||||
#define PREHEAT_3_FAN_SPEED 0 // Value from 0 to 255
|
||||
|
||||
|
|
@ -2314,11 +2319,11 @@
|
|||
|
||||
#if ENABLED(NOZZLE_PARK_FEATURE)
|
||||
// Specify a park position as { X, Y, Z_raise }
|
||||
#define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MIN_POS + 10), 20 }
|
||||
#define NOZZLE_PARK_POINT { (X_MIN_POS), (Y_MIN_POS), 20 }
|
||||
#define NOZZLE_PARK_MOVE 0 // Park motion: 0 = XY Move, 1 = X Only, 2 = Y Only, 3 = X before Y, 4 = Y before X
|
||||
#define NOZZLE_PARK_Z_RAISE_MIN 2 // (mm) Always raise Z by at least this distance
|
||||
#define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis)
|
||||
#define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers)
|
||||
#define NOZZLE_PARK_Z_FEEDRATE 10 // (mm/s) Z axis feedrate (not used for delta printers)
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
|
@ -3248,7 +3253,7 @@
|
|||
#define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens
|
||||
#define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus
|
||||
|
||||
//#define DISABLE_ENCODER // Disable the click encoder, if any
|
||||
#define DISABLE_ENCODER // Disable the click encoder, if any
|
||||
//#define TOUCH_IDLE_SLEEP_MINS 5 // (minutes) Display Sleep after a period of inactivity. Set with M255 S.
|
||||
|
||||
#define TOUCH_SCREEN_CALIBRATION
|
||||
|
|
|
|||
Loading…
Add table
Add a link
Reference in a new issue