3D-printing/Configurations
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Configurations.git synced 2025-07-07 06:57:39 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions

✨ CONFIGURE_FILAMENT_CHANGE

Browse source 
MarlinFirmware/Marlin#26613

Co-Authored-By: plampix <19209306+plampix@users.noreply.github.com>
This commit is contained in:
Scott Lahteine 2024-01-02 19:02:42 -06:00
parent a684d1b024
commit 7f1571e317
708 changed files with 1062 additions and 708 deletions
Download patch file Download diff file Expand all files Collapse all files

2
config/default/Configuration.h
View file

@ -2366,7 +2366,7 @@
*/ */
//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define EEPROM_SETTINGS // Persistent storage with M500 and M501
//#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release! //#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release!
#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save flash.
#define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
//#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors.

3
config/default/Configuration_adv.h
View file

@ -1352,7 +1352,7 @@
#define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm
#define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm
// Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). // Uncomment to enable reporting (required for "G425 V", but consumes flash).
//#define CALIBRATION_REPORTING //#define CALIBRATION_REPORTING
// The true location and dimension the cube/bolt/washer on the bed. // The true location and dimension the cube/bolt/washer on the bed.
@ -2952,6 +2952,7 @@
//#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
#define CONFIGURE_FILAMENT_CHANGE // Add M603 G-code and menu items. Requires ~1.3K bytes of flash.
#endif #endif
// @section tmc_smart // @section tmc_smart

2
config/examples/3DFabXYZ/Migbot/Configuration.h
View file

@ -2368,7 +2368,7 @@
*/ */
//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define EEPROM_SETTINGS // Persistent storage with M500 and M501
//#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release! //#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release!
#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save flash.
#define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
//#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors.

3
config/examples/3DFabXYZ/Migbot/Configuration_adv.h
View file

@ -1352,7 +1352,7 @@
#define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm
#define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm
// Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). // Uncomment to enable reporting (required for "G425 V", but consumes flash).
//#define CALIBRATION_REPORTING //#define CALIBRATION_REPORTING
// The true location and dimension the cube/bolt/washer on the bed. // The true location and dimension the cube/bolt/washer on the bed.
@ -2952,6 +2952,7 @@
#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
#define CONFIGURE_FILAMENT_CHANGE // Add M603 G-code and menu items. Requires ~1.3K bytes of flash.
#endif #endif
// @section tmc_smart // @section tmc_smart

2
config/examples/ADIMLab/Gantry v1/Configuration.h
View file

@ -2367,7 +2367,7 @@
*/ */
#define EEPROM_SETTINGS // Persistent storage with M500 and M501 #define EEPROM_SETTINGS // Persistent storage with M500 and M501
//#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release! //#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release!
#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save flash.
#define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
//#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors.

3
config/examples/ADIMLab/Gantry v1/Configuration_adv.h
View file

@ -1352,7 +1352,7 @@
#define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm
#define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm
// Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). // Uncomment to enable reporting (required for "G425 V", but consumes flash).
//#define CALIBRATION_REPORTING //#define CALIBRATION_REPORTING
// The true location and dimension the cube/bolt/washer on the bed. // The true location and dimension the cube/bolt/washer on the bed.
@ -2952,6 +2952,7 @@
//#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
#define CONFIGURE_FILAMENT_CHANGE // Add M603 G-code and menu items. Requires ~1.3K bytes of flash.
#endif #endif
// @section tmc_smart // @section tmc_smart

2
config/examples/ADIMLab/Gantry v2/Configuration.h
View file

@ -2367,7 +2367,7 @@
*/ */
#define EEPROM_SETTINGS // Persistent storage with M500 and M501 #define EEPROM_SETTINGS // Persistent storage with M500 and M501
//#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release! //#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release!
#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save flash.
#define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
//#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors.

3
config/examples/ADIMLab/Gantry v2/Configuration_adv.h
View file

@ -1352,7 +1352,7 @@
#define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm
#define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm
// Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). // Uncomment to enable reporting (required for "G425 V", but consumes flash).
//#define CALIBRATION_REPORTING //#define CALIBRATION_REPORTING
// The true location and dimension the cube/bolt/washer on the bed. // The true location and dimension the cube/bolt/washer on the bed.
@ -2952,6 +2952,7 @@
//#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
#define CONFIGURE_FILAMENT_CHANGE // Add M603 G-code and menu items. Requires ~1.3K bytes of flash.
#endif #endif
// @section tmc_smart // @section tmc_smart

2
config/examples/Alfawise/U20-bltouch/Configuration.h
View file

@ -2445,7 +2445,7 @@
*/ */
#define EEPROM_SETTINGS // Persistent storage with M500 and M501 #define EEPROM_SETTINGS // Persistent storage with M500 and M501
//#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release! //#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release!
#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save flash.
#define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
//#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors.

3
config/examples/Alfawise/U20-bltouch/Configuration_adv.h
View file

@ -1361,7 +1361,7 @@
#define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm
#define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm
// Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). // Uncomment to enable reporting (required for "G425 V", but consumes flash).
//#define CALIBRATION_REPORTING //#define CALIBRATION_REPORTING
// The true location and dimension the cube/bolt/washer on the bed. // The true location and dimension the cube/bolt/washer on the bed.
@ -2962,6 +2962,7 @@
#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
#define CONFIGURE_FILAMENT_CHANGE // Add M603 G-code and menu items. Requires ~1.3K bytes of flash.
#endif #endif
// @section tmc_smart // @section tmc_smart

2
config/examples/Alfawise/U20/Configuration.h
View file

@ -2446,7 +2446,7 @@
*/ */
#define EEPROM_SETTINGS // Persistent storage with M500 and M501 #define EEPROM_SETTINGS // Persistent storage with M500 and M501
//#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release! //#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release!
#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save flash.
#define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
//#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors.

3
config/examples/Alfawise/U20/Configuration_adv.h
View file

@ -1352,7 +1352,7 @@
#define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm
#define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm
// Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). // Uncomment to enable reporting (required for "G425 V", but consumes flash).
//#define CALIBRATION_REPORTING //#define CALIBRATION_REPORTING
// The true location and dimension the cube/bolt/washer on the bed. // The true location and dimension the cube/bolt/washer on the bed.
@ -2953,6 +2953,7 @@
#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
#define CONFIGURE_FILAMENT_CHANGE // Add M603 G-code and menu items. Requires ~1.3K bytes of flash.
#endif #endif
// @section tmc_smart // @section tmc_smart

2
config/examples/AliExpress/CL-260/Configuration.h
View file

@ -2366,7 +2366,7 @@
*/ */
//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define EEPROM_SETTINGS // Persistent storage with M500 and M501
//#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release! //#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release!
#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save flash.
#define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
//#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors.

3
config/examples/AliExpress/CL-260/Configuration_adv.h
View file

@ -1352,7 +1352,7 @@
#define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm
#define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm
// Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). // Uncomment to enable reporting (required for "G425 V", but consumes flash).
//#define CALIBRATION_REPORTING //#define CALIBRATION_REPORTING
// The true location and dimension the cube/bolt/washer on the bed. // The true location and dimension the cube/bolt/washer on the bed.
@ -2952,6 +2952,7 @@
//#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
#define CONFIGURE_FILAMENT_CHANGE // Add M603 G-code and menu items. Requires ~1.3K bytes of flash.
#endif #endif
// @section tmc_smart // @section tmc_smart

2
config/examples/AliExpress/UM2pExt/Configuration.h
View file

@ -2367,7 +2367,7 @@
*/ */
//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define EEPROM_SETTINGS // Persistent storage with M500 and M501
//#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release! //#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release!
#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save flash.
#define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
//#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors.

3
config/examples/AliExpress/UM2pExt/Configuration_adv.h
View file

@ -1352,7 +1352,7 @@
#define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm
#define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm
// Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). // Uncomment to enable reporting (required for "G425 V", but consumes flash).
//#define CALIBRATION_REPORTING //#define CALIBRATION_REPORTING
// The true location and dimension the cube/bolt/washer on the bed. // The true location and dimension the cube/bolt/washer on the bed.
@ -2954,6 +2954,7 @@
//#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
#define CONFIGURE_FILAMENT_CHANGE // Add M603 G-code and menu items. Requires ~1.3K bytes of flash.
#endif #endif
// @section tmc_smart // @section tmc_smart

2
config/examples/Anet/A2/Configuration.h
View file

@ -2366,7 +2366,7 @@
*/ */
#define EEPROM_SETTINGS // Persistent storage with M500 and M501 #define EEPROM_SETTINGS // Persistent storage with M500 and M501
//#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release! //#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release!
#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save flash.
#define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
//#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors.

3
config/examples/Anet/A2/Configuration_adv.h
View file

@ -1352,7 +1352,7 @@
#define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm
#define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm
// Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). // Uncomment to enable reporting (required for "G425 V", but consumes flash).
//#define CALIBRATION_REPORTING //#define CALIBRATION_REPORTING
// The true location and dimension the cube/bolt/washer on the bed. // The true location and dimension the cube/bolt/washer on the bed.
@ -2952,6 +2952,7 @@
//#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
#define CONFIGURE_FILAMENT_CHANGE // Add M603 G-code and menu items. Requires ~1.3K bytes of flash.
#endif #endif
// @section tmc_smart // @section tmc_smart

2
config/examples/Anet/A2plus/Configuration.h
View file

@ -2366,7 +2366,7 @@
*/ */
#define EEPROM_SETTINGS // Persistent storage with M500 and M501 #define EEPROM_SETTINGS // Persistent storage with M500 and M501
//#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release! //#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release!
#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save flash.
#define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
//#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors.

3
config/examples/Anet/A2plus/Configuration_adv.h
View file

@ -1352,7 +1352,7 @@
#define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm
#define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm
// Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). // Uncomment to enable reporting (required for "G425 V", but consumes flash).
//#define CALIBRATION_REPORTING //#define CALIBRATION_REPORTING
// The true location and dimension the cube/bolt/washer on the bed. // The true location and dimension the cube/bolt/washer on the bed.
@ -2952,6 +2952,7 @@
//#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
#define CONFIGURE_FILAMENT_CHANGE // Add M603 G-code and menu items. Requires ~1.3K bytes of flash.
#endif #endif
// @section tmc_smart // @section tmc_smart

2
config/examples/Anet/A6/Configuration.h
View file

@ -2456,7 +2456,7 @@
*/ */
#define EEPROM_SETTINGS // Persistent storage with M500 and M501 #define EEPROM_SETTINGS // Persistent storage with M500 and M501
//#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release! //#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release!
#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save flash.
#define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
//#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors.

3
config/examples/Anet/A6/Configuration_adv.h
View file

@ -1352,7 +1352,7 @@
#define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm
#define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm
// Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). // Uncomment to enable reporting (required for "G425 V", but consumes flash).
//#define CALIBRATION_REPORTING //#define CALIBRATION_REPORTING
// The true location and dimension the cube/bolt/washer on the bed. // The true location and dimension the cube/bolt/washer on the bed.
@ -2952,6 +2952,7 @@
//#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
#define CONFIGURE_FILAMENT_CHANGE // Add M603 G-code and menu items. Requires ~1.3K bytes of flash.
#endif #endif
// @section tmc_smart // @section tmc_smart

2
config/examples/Anet/A8/Configuration.h
View file

@ -2369,7 +2369,7 @@
*/ */
#define EEPROM_SETTINGS // Persistent storage with M500 and M501 #define EEPROM_SETTINGS // Persistent storage with M500 and M501
//#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release! //#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release!
#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save flash.
#define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
//#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors.

3
config/examples/Anet/A8/Configuration_adv.h
View file

@ -1352,7 +1352,7 @@
#define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm
#define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm
// Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). // Uncomment to enable reporting (required for "G425 V", but consumes flash).
//#define CALIBRATION_REPORTING //#define CALIBRATION_REPORTING
// The true location and dimension the cube/bolt/washer on the bed. // The true location and dimension the cube/bolt/washer on the bed.
@ -2952,6 +2952,7 @@
//#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
#define CONFIGURE_FILAMENT_CHANGE // Add M603 G-code and menu items. Requires ~1.3K bytes of flash.
#endif #endif
// @section tmc_smart // @section tmc_smart

2
config/examples/Anet/A8plus/Configuration.h
View file

@ -2368,7 +2368,7 @@
*/ */
#define EEPROM_SETTINGS // Persistent storage with M500 and M501 #define EEPROM_SETTINGS // Persistent storage with M500 and M501
//#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release! //#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release!
#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save flash.
#define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
//#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors.

3
config/examples/Anet/A8plus/Configuration_adv.h
View file

@ -1352,7 +1352,7 @@
#define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm
#define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm
// Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). // Uncomment to enable reporting (required for "G425 V", but consumes flash).
//#define CALIBRATION_REPORTING //#define CALIBRATION_REPORTING
// The true location and dimension the cube/bolt/washer on the bed. // The true location and dimension the cube/bolt/washer on the bed.
@ -2952,6 +2952,7 @@
//#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
#define CONFIGURE_FILAMENT_CHANGE // Add M603 G-code and menu items. Requires ~1.3K bytes of flash.
#endif #endif
// @section tmc_smart // @section tmc_smart

2
config/examples/Anet/A9/Configuration.h
View file

@ -2366,7 +2366,7 @@
*/ */
#define EEPROM_SETTINGS // Persistent storage with M500 and M501 #define EEPROM_SETTINGS // Persistent storage with M500 and M501
//#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release! //#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release!
#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save flash.
#define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
//#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors.

3
config/examples/Anet/A9/Configuration_adv.h
View file

@ -1352,7 +1352,7 @@
#define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm
#define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm
// Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). // Uncomment to enable reporting (required for "G425 V", but consumes flash).
//#define CALIBRATION_REPORTING //#define CALIBRATION_REPORTING
// The true location and dimension the cube/bolt/washer on the bed. // The true location and dimension the cube/bolt/washer on the bed.
@ -2952,6 +2952,7 @@
//#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
#define CONFIGURE_FILAMENT_CHANGE // Add M603 G-code and menu items. Requires ~1.3K bytes of flash.
#endif #endif
// @section tmc_smart // @section tmc_smart

2
config/examples/Anet/E10/Configuration.h
View file

@ -2366,7 +2366,7 @@
*/ */
#define EEPROM_SETTINGS // Persistent storage with M500 and M501 #define EEPROM_SETTINGS // Persistent storage with M500 and M501
//#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release! //#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release!
#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save flash.
#define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors.

3
config/examples/Anet/E10/Configuration_adv.h
View file

@ -1352,7 +1352,7 @@
#define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm
#define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm
// Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). // Uncomment to enable reporting (required for "G425 V", but consumes flash).
//#define CALIBRATION_REPORTING //#define CALIBRATION_REPORTING
// The true location and dimension the cube/bolt/washer on the bed. // The true location and dimension the cube/bolt/washer on the bed.
@ -2952,6 +2952,7 @@
//#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
#define CONFIGURE_FILAMENT_CHANGE // Add M603 G-code and menu items. Requires ~1.3K bytes of flash.
#endif #endif
// @section tmc_smart // @section tmc_smart

2
config/examples/Anet/E16/BTT SKR 1.3/Configuration.h
View file

@ -2368,7 +2368,7 @@
*/ */
#define EEPROM_SETTINGS // Persistent storage with M500 and M501 #define EEPROM_SETTINGS // Persistent storage with M500 and M501
//#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release! //#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release!
#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save flash.
#define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
//#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors.

3
config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h
View file

@ -1352,7 +1352,7 @@
#define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm
#define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm
// Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). // Uncomment to enable reporting (required for "G425 V", but consumes flash).
//#define CALIBRATION_REPORTING //#define CALIBRATION_REPORTING
// The true location and dimension the cube/bolt/washer on the bed. // The true location and dimension the cube/bolt/washer on the bed.
@ -2952,6 +2952,7 @@
//#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
#define CONFIGURE_FILAMENT_CHANGE // Add M603 G-code and menu items. Requires ~1.3K bytes of flash.
#endif #endif
// @section tmc_smart // @section tmc_smart

2
config/examples/Anet/E16/Stock/Configuration.h
View file

@ -2368,7 +2368,7 @@
*/ */
#define EEPROM_SETTINGS // Persistent storage with M500 and M501 #define EEPROM_SETTINGS // Persistent storage with M500 and M501
//#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release! //#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release!
#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save flash.
#define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors.

3
config/examples/Anet/E16/Stock/Configuration_adv.h
View file

@ -1352,7 +1352,7 @@
#define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm
#define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm
// Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). // Uncomment to enable reporting (required for "G425 V", but consumes flash).
//#define CALIBRATION_REPORTING //#define CALIBRATION_REPORTING
// The true location and dimension the cube/bolt/washer on the bed. // The true location and dimension the cube/bolt/washer on the bed.
@ -2952,6 +2952,7 @@
//#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
#define CONFIGURE_FILAMENT_CHANGE // Add M603 G-code and menu items. Requires ~1.3K bytes of flash.
#endif #endif
// @section tmc_smart // @section tmc_smart

2
config/examples/Anet/ET4+/Configuration.h
View file

@ -2372,7 +2372,7 @@
*/ */
#define EEPROM_SETTINGS // Persistent storage with M500 and M501 #define EEPROM_SETTINGS // Persistent storage with M500 and M501
//#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release! //#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release!
#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save flash.
#define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors.

3
config/examples/Anet/ET4+/Configuration_adv.h
View file

@ -1352,7 +1352,7 @@
#define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm
#define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm
// Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). // Uncomment to enable reporting (required for "G425 V", but consumes flash).
//#define CALIBRATION_REPORTING //#define CALIBRATION_REPORTING
// The true location and dimension the cube/bolt/washer on the bed. // The true location and dimension the cube/bolt/washer on the bed.
@ -2952,6 +2952,7 @@
#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
#define CONFIGURE_FILAMENT_CHANGE // Add M603 G-code and menu items. Requires ~1.3K bytes of flash.
#endif #endif
// @section tmc_smart // @section tmc_smart

2
config/examples/Anet/ET4-Pro/Configuration.h
View file

@ -2372,7 +2372,7 @@
*/ */
#define EEPROM_SETTINGS // Persistent storage with M500 and M501 #define EEPROM_SETTINGS // Persistent storage with M500 and M501
//#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release! //#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release!
#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save flash.
#define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors.

3
config/examples/Anet/ET4-Pro/Configuration_adv.h
View file

@ -1352,7 +1352,7 @@
#define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm
#define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm
// Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). // Uncomment to enable reporting (required for "G425 V", but consumes flash).
//#define CALIBRATION_REPORTING //#define CALIBRATION_REPORTING
// The true location and dimension the cube/bolt/washer on the bed. // The true location and dimension the cube/bolt/washer on the bed.
@ -2952,6 +2952,7 @@
#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
#define CONFIGURE_FILAMENT_CHANGE // Add M603 G-code and menu items. Requires ~1.3K bytes of flash.
#endif #endif
// @section tmc_smart // @section tmc_smart

2
config/examples/Anet/ET4/Configuration.h
View file

@ -2372,7 +2372,7 @@
*/ */
#define EEPROM_SETTINGS // Persistent storage with M500 and M501 #define EEPROM_SETTINGS // Persistent storage with M500 and M501
//#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release! //#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release!
#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save flash.
#define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors.

3
config/examples/Anet/ET4/Configuration_adv.h
View file

@ -1352,7 +1352,7 @@
#define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm
#define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm
// Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). // Uncomment to enable reporting (required for "G425 V", but consumes flash).
//#define CALIBRATION_REPORTING //#define CALIBRATION_REPORTING
// The true location and dimension the cube/bolt/washer on the bed. // The true location and dimension the cube/bolt/washer on the bed.
@ -2952,6 +2952,7 @@
#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
#define CONFIGURE_FILAMENT_CHANGE // Add M603 G-code and menu items. Requires ~1.3K bytes of flash.
#endif #endif
// @section tmc_smart // @section tmc_smart

2
config/examples/Anet/ET4X/Configuration.h
View file

@ -2372,7 +2372,7 @@
*/ */
#define EEPROM_SETTINGS // Persistent storage with M500 and M501 #define EEPROM_SETTINGS // Persistent storage with M500 and M501
//#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release! //#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release!
#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save flash.
#define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors.

3
config/examples/Anet/ET4X/Configuration_adv.h
View file

@ -1352,7 +1352,7 @@
#define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm
#define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm
// Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). // Uncomment to enable reporting (required for "G425 V", but consumes flash).
//#define CALIBRATION_REPORTING //#define CALIBRATION_REPORTING
// The true location and dimension the cube/bolt/washer on the bed. // The true location and dimension the cube/bolt/washer on the bed.
@ -2952,6 +2952,7 @@
#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
#define CONFIGURE_FILAMENT_CHANGE // Add M603 G-code and menu items. Requires ~1.3K bytes of flash.
#endif #endif
// @section tmc_smart // @section tmc_smart

2
config/examples/Anet/ET5-Pro/Configuration.h
View file

@ -2367,7 +2367,7 @@
*/ */
#define EEPROM_SETTINGS // Persistent storage with M500 and M501 #define EEPROM_SETTINGS // Persistent storage with M500 and M501
//#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release! //#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release!
#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save flash.
#define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors.

3
config/examples/Anet/ET5-Pro/Configuration_adv.h
View file

@ -1352,7 +1352,7 @@
#define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm
#define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm
// Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). // Uncomment to enable reporting (required for "G425 V", but consumes flash).
//#define CALIBRATION_REPORTING //#define CALIBRATION_REPORTING
// The true location and dimension the cube/bolt/washer on the bed. // The true location and dimension the cube/bolt/washer on the bed.
@ -2952,6 +2952,7 @@
#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
#define CONFIGURE_FILAMENT_CHANGE // Add M603 G-code and menu items. Requires ~1.3K bytes of flash.
#endif #endif
// @section tmc_smart // @section tmc_smart

2
config/examples/Anet/ET5/Configuration.h
View file

@ -2367,7 +2367,7 @@
*/ */
#define EEPROM_SETTINGS // Persistent storage with M500 and M501 #define EEPROM_SETTINGS // Persistent storage with M500 and M501
//#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release! //#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release!
#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save flash.
#define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors.

3
config/examples/Anet/ET5/Configuration_adv.h
View file

@ -1352,7 +1352,7 @@
#define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm
#define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm
// Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). // Uncomment to enable reporting (required for "G425 V", but consumes flash).
//#define CALIBRATION_REPORTING //#define CALIBRATION_REPORTING
// The true location and dimension the cube/bolt/washer on the bed. // The true location and dimension the cube/bolt/washer on the bed.
@ -2952,6 +2952,7 @@
#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
#define CONFIGURE_FILAMENT_CHANGE // Add M603 G-code and menu items. Requires ~1.3K bytes of flash.
#endif #endif
// @section tmc_smart // @section tmc_smart

2
config/examples/Anet/ET5X/Configuration.h
View file

@ -2367,7 +2367,7 @@
*/ */
#define EEPROM_SETTINGS // Persistent storage with M500 and M501 #define EEPROM_SETTINGS // Persistent storage with M500 and M501
//#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release! //#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release!
#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save flash.
#define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors.

3
config/examples/Anet/ET5X/Configuration_adv.h
View file

@ -1352,7 +1352,7 @@
#define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm
#define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm
// Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). // Uncomment to enable reporting (required for "G425 V", but consumes flash).
//#define CALIBRATION_REPORTING //#define CALIBRATION_REPORTING
// The true location and dimension the cube/bolt/washer on the bed. // The true location and dimension the cube/bolt/washer on the bed.
@ -2952,6 +2952,7 @@
#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
#define CONFIGURE_FILAMENT_CHANGE // Add M603 G-code and menu items. Requires ~1.3K bytes of flash.
#endif #endif
// @section tmc_smart // @section tmc_smart

2
config/examples/AnyCubic/Chiron/Configuration.h
View file

@ -2369,7 +2369,7 @@
*/ */
#define EEPROM_SETTINGS // Persistent storage with M500 and M501 #define EEPROM_SETTINGS // Persistent storage with M500 and M501
//#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release! //#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release!
#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save flash.
#define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors.

3
config/examples/AnyCubic/Chiron/Configuration_adv.h
View file

@ -1352,7 +1352,7 @@
#define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm
#define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm
// Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). // Uncomment to enable reporting (required for "G425 V", but consumes flash).
//#define CALIBRATION_REPORTING //#define CALIBRATION_REPORTING
// The true location and dimension the cube/bolt/washer on the bed. // The true location and dimension the cube/bolt/washer on the bed.
@ -2952,6 +2952,7 @@
#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
#define CONFIGURE_FILAMENT_CHANGE // Add M603 G-code and menu items. Requires ~1.3K bytes of flash.
#endif #endif
// @section tmc_smart // @section tmc_smart

2
config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h
View file

@ -2367,7 +2367,7 @@
*/ */
#define EEPROM_SETTINGS // Persistent storage with M500 and M501 #define EEPROM_SETTINGS // Persistent storage with M500 and M501
//#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release! //#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release!
#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save flash.
#define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
//#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors.

3
config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h
View file

@ -1352,7 +1352,7 @@
#define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm
#define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm
// Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). // Uncomment to enable reporting (required for "G425 V", but consumes flash).
//#define CALIBRATION_REPORTING //#define CALIBRATION_REPORTING
// The true location and dimension the cube/bolt/washer on the bed. // The true location and dimension the cube/bolt/washer on the bed.
@ -2952,6 +2952,7 @@
//#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
#define CONFIGURE_FILAMENT_CHANGE // Add M603 G-code and menu items. Requires ~1.3K bytes of flash.
#endif #endif
// @section tmc_smart // @section tmc_smart

2
config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h
View file

@ -2367,7 +2367,7 @@
*/ */
#define EEPROM_SETTINGS // Persistent storage with M500 and M501 #define EEPROM_SETTINGS // Persistent storage with M500 and M501
//#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release! //#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release!
#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save flash.
#define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
//#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors.

3
config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h
View file

@ -1352,7 +1352,7 @@
#define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm
#define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm
// Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). // Uncomment to enable reporting (required for "G425 V", but consumes flash).
//#define CALIBRATION_REPORTING //#define CALIBRATION_REPORTING
// The true location and dimension the cube/bolt/washer on the bed. // The true location and dimension the cube/bolt/washer on the bed.
@ -2952,6 +2952,7 @@
//#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
#define CONFIGURE_FILAMENT_CHANGE // Add M603 G-code and menu items. Requires ~1.3K bytes of flash.
#endif #endif
// @section tmc_smart // @section tmc_smart

2
config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h
View file

@ -2366,7 +2366,7 @@
*/ */
#define EEPROM_SETTINGS // Persistent storage with M500 and M501 #define EEPROM_SETTINGS // Persistent storage with M500 and M501
//#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release! //#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release!
#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save flash.
#define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
//#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors.

3
config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h
View file

@ -1352,7 +1352,7 @@
#define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm
#define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm
// Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). // Uncomment to enable reporting (required for "G425 V", but consumes flash).
//#define CALIBRATION_REPORTING //#define CALIBRATION_REPORTING
// The true location and dimension the cube/bolt/washer on the bed. // The true location and dimension the cube/bolt/washer on the bed.
@ -2952,6 +2952,7 @@
//#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
#define CONFIGURE_FILAMENT_CHANGE // Add M603 G-code and menu items. Requires ~1.3K bytes of flash.
#endif #endif
// @section tmc_smart // @section tmc_smart

2
config/examples/AnyCubic/Vyper/Configuration.h
View file

@ -2366,7 +2366,7 @@
*/ */
#define EEPROM_SETTINGS // Persistent storage with M500 and M501 #define EEPROM_SETTINGS // Persistent storage with M500 and M501
//#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release! //#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release!
#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save flash.
#define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors.

3
config/examples/AnyCubic/Vyper/Configuration_adv.h
View file

@ -1352,7 +1352,7 @@
#define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm
#define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm
// Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). // Uncomment to enable reporting (required for "G425 V", but consumes flash).
//#define CALIBRATION_REPORTING //#define CALIBRATION_REPORTING
// The true location and dimension the cube/bolt/washer on the bed. // The true location and dimension the cube/bolt/washer on the bed.
@ -2952,6 +2952,7 @@
#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
#define CONFIGURE_FILAMENT_CHANGE // Add M603 G-code and menu items. Requires ~1.3K bytes of flash.
#endif #endif
// @section tmc_smart // @section tmc_smart

2
config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration.h
View file

@ -2426,7 +2426,7 @@
*/ */
#define EEPROM_SETTINGS // Persistent storage with M500 and M501 #define EEPROM_SETTINGS // Persistent storage with M500 and M501
//#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release! //#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release!
#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save flash.
#define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
//#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors.

3
config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration_adv.h
View file

@ -1352,7 +1352,7 @@
#define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm
#define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm
// Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). // Uncomment to enable reporting (required for "G425 V", but consumes flash).
//#define CALIBRATION_REPORTING //#define CALIBRATION_REPORTING
// The true location and dimension the cube/bolt/washer on the bed. // The true location and dimension the cube/bolt/washer on the bed.
@ -2952,6 +2952,7 @@
//#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
#define CONFIGURE_FILAMENT_CHANGE // Add M603 G-code and menu items. Requires ~1.3K bytes of flash.
#endif #endif
// @section tmc_smart // @section tmc_smart

2
config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration.h
View file

@ -2385,7 +2385,7 @@
*/ */
#define EEPROM_SETTINGS // Persistent storage with M500 and M501 #define EEPROM_SETTINGS // Persistent storage with M500 and M501
//#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release! //#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release!
#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save flash.
#define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
//#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors.

3
config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration_adv.h
View file

@ -1352,7 +1352,7 @@
#define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm
#define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm
// Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). // Uncomment to enable reporting (required for "G425 V", but consumes flash).
//#define CALIBRATION_REPORTING //#define CALIBRATION_REPORTING
// The true location and dimension the cube/bolt/washer on the bed. // The true location and dimension the cube/bolt/washer on the bed.
@ -2952,6 +2952,7 @@
//#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
#define CONFIGURE_FILAMENT_CHANGE // Add M603 G-code and menu items. Requires ~1.3K bytes of flash.
#endif #endif
// @section tmc_smart // @section tmc_smart

2
config/examples/AnyCubic/i3/Configuration.h
View file

@ -2366,7 +2366,7 @@
*/ */
#define EEPROM_SETTINGS // Persistent storage with M500 and M501 #define EEPROM_SETTINGS // Persistent storage with M500 and M501
//#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release! //#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release!
#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save flash.
#define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
//#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors.

3
config/examples/AnyCubic/i3/Configuration_adv.h
View file

@ -1352,7 +1352,7 @@
#define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm
#define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm
// Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). // Uncomment to enable reporting (required for "G425 V", but consumes flash).
//#define CALIBRATION_REPORTING //#define CALIBRATION_REPORTING
// The true location and dimension the cube/bolt/washer on the bed. // The true location and dimension the cube/bolt/washer on the bed.
@ -2952,6 +2952,7 @@
//#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
#define CONFIGURE_FILAMENT_CHANGE // Add M603 G-code and menu items. Requires ~1.3K bytes of flash.
#endif #endif
// @section tmc_smart // @section tmc_smart

2
config/examples/ArmEd/Configuration.h
View file

@ -2367,7 +2367,7 @@
*/ */
//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define EEPROM_SETTINGS // Persistent storage with M500 and M501
//#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release! //#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release!
#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save flash.
#define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
//#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors.

3
config/examples/ArmEd/Configuration_adv.h
View file

@ -1357,7 +1357,7 @@
#define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm
#define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm
// Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). // Uncomment to enable reporting (required for "G425 V", but consumes flash).
//#define CALIBRATION_REPORTING //#define CALIBRATION_REPORTING
// The true location and dimension the cube/bolt/washer on the bed. // The true location and dimension the cube/bolt/washer on the bed.
@ -2957,6 +2957,7 @@
//#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
#define CONFIGURE_FILAMENT_CHANGE // Add M603 G-code and menu items. Requires ~1.3K bytes of flash.
#endif #endif
// @section tmc_smart // @section tmc_smart

2
config/examples/Artillery/Genius Pro/Configuration.h
View file

@ -2366,7 +2366,7 @@
*/ */
#define EEPROM_SETTINGS // Persistent storage with M500 and M501 #define EEPROM_SETTINGS // Persistent storage with M500 and M501
//#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release! //#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release!
#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save flash.
#define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors.

3
config/examples/Artillery/Genius Pro/Configuration_adv.h
View file

@ -1352,7 +1352,7 @@
#define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm
#define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm
// Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). // Uncomment to enable reporting (required for "G425 V", but consumes flash).
//#define CALIBRATION_REPORTING //#define CALIBRATION_REPORTING
// The true location and dimension the cube/bolt/washer on the bed. // The true location and dimension the cube/bolt/washer on the bed.
@ -2952,6 +2952,7 @@
//#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
#define CONFIGURE_FILAMENT_CHANGE // Add M603 G-code and menu items. Requires ~1.3K bytes of flash.
#endif #endif
// @section tmc_smart // @section tmc_smart

2
config/examples/Artillery/Genius/BLTouch/Configuration.h
View file

@ -2366,7 +2366,7 @@
*/ */
#define EEPROM_SETTINGS // Persistent storage with M500 and M501 #define EEPROM_SETTINGS // Persistent storage with M500 and M501
//#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release! //#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release!
#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save flash.
#define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors.

3
config/examples/Artillery/Genius/BLTouch/Configuration_adv.h
View file

@ -1352,7 +1352,7 @@
#define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm
#define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm
// Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). // Uncomment to enable reporting (required for "G425 V", but consumes flash).
//#define CALIBRATION_REPORTING //#define CALIBRATION_REPORTING
// The true location and dimension the cube/bolt/washer on the bed. // The true location and dimension the cube/bolt/washer on the bed.
@ -2952,6 +2952,7 @@
//#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
#define CONFIGURE_FILAMENT_CHANGE // Add M603 G-code and menu items. Requires ~1.3K bytes of flash.
#endif #endif
// @section tmc_smart // @section tmc_smart

2
config/examples/Artillery/Genius/V1/Configuration.h
View file

@ -2366,7 +2366,7 @@
*/ */
#define EEPROM_SETTINGS // Persistent storage with M500 and M501 #define EEPROM_SETTINGS // Persistent storage with M500 and M501
//#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release! //#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release!
#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save flash.
#define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors.

3
config/examples/Artillery/Genius/V1/Configuration_adv.h
View file

@ -1352,7 +1352,7 @@
#define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm
#define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm
// Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). // Uncomment to enable reporting (required for "G425 V", but consumes flash).
//#define CALIBRATION_REPORTING //#define CALIBRATION_REPORTING
// The true location and dimension the cube/bolt/washer on the bed. // The true location and dimension the cube/bolt/washer on the bed.
@ -2952,6 +2952,7 @@
//#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
#define CONFIGURE_FILAMENT_CHANGE // Add M603 G-code and menu items. Requires ~1.3K bytes of flash.
#endif #endif
// @section tmc_smart // @section tmc_smart

2
config/examples/Artillery/Hornet/Configuration.h
View file

@ -2366,7 +2366,7 @@
*/ */
#define EEPROM_SETTINGS // Persistent storage with M500 and M501 #define EEPROM_SETTINGS // Persistent storage with M500 and M501
//#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release! //#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release!
#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save flash.
#define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors.

3
config/examples/Artillery/Hornet/Configuration_adv.h
View file

@ -1352,7 +1352,7 @@
#define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm
#define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm
// Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). // Uncomment to enable reporting (required for "G425 V", but consumes flash).
//#define CALIBRATION_REPORTING //#define CALIBRATION_REPORTING
// The true location and dimension the cube/bolt/washer on the bed. // The true location and dimension the cube/bolt/washer on the bed.
@ -2952,6 +2952,7 @@
#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
#define CONFIGURE_FILAMENT_CHANGE // Add M603 G-code and menu items. Requires ~1.3K bytes of flash.
#endif #endif
// @section tmc_smart // @section tmc_smart

2
config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration.h
View file

@ -2382,7 +2382,7 @@
*/ */
#define EEPROM_SETTINGS // Persistent storage with M500 and M501 #define EEPROM_SETTINGS // Persistent storage with M500 and M501
//#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release! //#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release!
#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save flash.
#define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
//#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors.

3
config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h
View file

@ -1352,7 +1352,7 @@
#define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm
#define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm
// Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). // Uncomment to enable reporting (required for "G425 V", but consumes flash).
//#define CALIBRATION_REPORTING //#define CALIBRATION_REPORTING
// The true location and dimension the cube/bolt/washer on the bed. // The true location and dimension the cube/bolt/washer on the bed.
@ -2952,6 +2952,7 @@
//#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
#define CONFIGURE_FILAMENT_CHANGE // Add M603 G-code and menu items. Requires ~1.3K bytes of flash.
#endif #endif
// @section tmc_smart // @section tmc_smart

2
config/examples/Artillery/Sidewinder X1/V1/Configuration.h
View file

@ -2366,7 +2366,7 @@
*/ */
#define EEPROM_SETTINGS // Persistent storage with M500 and M501 #define EEPROM_SETTINGS // Persistent storage with M500 and M501
//#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release! //#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release!
#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save flash.
#define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
//#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors.

3
config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h
View file

@ -1352,7 +1352,7 @@
#define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm
#define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm
// Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). // Uncomment to enable reporting (required for "G425 V", but consumes flash).
//#define CALIBRATION_REPORTING //#define CALIBRATION_REPORTING
// The true location and dimension the cube/bolt/washer on the bed. // The true location and dimension the cube/bolt/washer on the bed.
@ -2952,6 +2952,7 @@
//#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
#define CONFIGURE_FILAMENT_CHANGE // Add M603 G-code and menu items. Requires ~1.3K bytes of flash.
#endif #endif
// @section tmc_smart // @section tmc_smart

2
config/examples/Artillery/Sidewinder X2/Configuration.h
View file

@ -2366,7 +2366,7 @@
*/ */
#define EEPROM_SETTINGS // Persistent storage with M500 and M501 #define EEPROM_SETTINGS // Persistent storage with M500 and M501
//#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release! //#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release!
#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save flash.
#define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors.

3
config/examples/Artillery/Sidewinder X2/Configuration_adv.h
View file

@ -1352,7 +1352,7 @@
#define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm
#define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm
// Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). // Uncomment to enable reporting (required for "G425 V", but consumes flash).
//#define CALIBRATION_REPORTING //#define CALIBRATION_REPORTING
// The true location and dimension the cube/bolt/washer on the bed. // The true location and dimension the cube/bolt/washer on the bed.
@ -2952,6 +2952,7 @@
//#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
#define CONFIGURE_FILAMENT_CHANGE // Add M603 G-code and menu items. Requires ~1.3K bytes of flash.
#endif #endif
// @section tmc_smart // @section tmc_smart

2
config/examples/Azteeg/X5GT/Configuration.h
View file

@ -2366,7 +2366,7 @@
*/ */
#define EEPROM_SETTINGS // Persistent storage with M500 and M501 #define EEPROM_SETTINGS // Persistent storage with M500 and M501
//#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release! //#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release!
#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save flash.
#define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
//#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors.

3
config/examples/Azteeg/X5GT/Configuration_adv.h
View file

@ -1352,7 +1352,7 @@
#define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm
#define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm
// Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). // Uncomment to enable reporting (required for "G425 V", but consumes flash).
//#define CALIBRATION_REPORTING //#define CALIBRATION_REPORTING
// The true location and dimension the cube/bolt/washer on the bed. // The true location and dimension the cube/bolt/washer on the bed.
@ -2952,6 +2952,7 @@
//#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
#define CONFIGURE_FILAMENT_CHANGE // Add M603 G-code and menu items. Requires ~1.3K bytes of flash.
#endif #endif
// @section tmc_smart // @section tmc_smart

2
config/examples/BIBO/TouchX/cyclops/Configuration.h
View file

@ -2366,7 +2366,7 @@
*/ */
#define EEPROM_SETTINGS // Persistent storage with M500 and M501 #define EEPROM_SETTINGS // Persistent storage with M500 and M501
//#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release! //#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release!
#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save flash.
#define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
//#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors.

3
config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
View file

@ -1352,7 +1352,7 @@
#define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm
#define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm
// Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). // Uncomment to enable reporting (required for "G425 V", but consumes flash).
//#define CALIBRATION_REPORTING //#define CALIBRATION_REPORTING
// The true location and dimension the cube/bolt/washer on the bed. // The true location and dimension the cube/bolt/washer on the bed.
@ -2952,6 +2952,7 @@
//#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
#define CONFIGURE_FILAMENT_CHANGE // Add M603 G-code and menu items. Requires ~1.3K bytes of flash.
#endif #endif
// @section tmc_smart // @section tmc_smart

2
config/examples/BIBO/TouchX/default/Configuration.h
View file

@ -2366,7 +2366,7 @@
*/ */
#define EEPROM_SETTINGS // Persistent storage with M500 and M501 #define EEPROM_SETTINGS // Persistent storage with M500 and M501
//#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release! //#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release!
#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save flash.
#define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
//#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors.

3
config/examples/BIBO/TouchX/default/Configuration_adv.h
View file

@ -1352,7 +1352,7 @@
#define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm
#define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm
// Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). // Uncomment to enable reporting (required for "G425 V", but consumes flash).
//#define CALIBRATION_REPORTING //#define CALIBRATION_REPORTING
// The true location and dimension the cube/bolt/washer on the bed. // The true location and dimension the cube/bolt/washer on the bed.
@ -2949,6 +2949,7 @@
//#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
#define CONFIGURE_FILAMENT_CHANGE // Add M603 G-code and menu items. Requires ~1.3K bytes of flash.
#endif #endif
// @section tmc_smart // @section tmc_smart

2
config/examples/BIQU/B1 SE Plus/Configuration.h
View file

@ -2364,7 +2364,7 @@
*/ */
#define EEPROM_SETTINGS // Persistent storage with M500 and M501 #define EEPROM_SETTINGS // Persistent storage with M500 and M501
//#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release! //#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release!
#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save flash.
#define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors.

3
config/examples/BIQU/B1 SE Plus/Configuration_adv.h
View file

@ -1352,7 +1352,7 @@
#define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm
#define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm
// Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). // Uncomment to enable reporting (required for "G425 V", but consumes flash).
//#define CALIBRATION_REPORTING //#define CALIBRATION_REPORTING
// The true location and dimension the cube/bolt/washer on the bed. // The true location and dimension the cube/bolt/washer on the bed.
@ -2952,6 +2952,7 @@
#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
#define CONFIGURE_FILAMENT_CHANGE // Add M603 G-code and menu items. Requires ~1.3K bytes of flash.
#endif #endif
// @section tmc_smart // @section tmc_smart

2
config/examples/BIQU/B1 SE/Configuration.h
View file

@ -2364,7 +2364,7 @@
*/ */
#define EEPROM_SETTINGS // Persistent storage with M500 and M501 #define EEPROM_SETTINGS // Persistent storage with M500 and M501
//#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release! //#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release!
#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save flash.
#define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors.

3
config/examples/BIQU/B1 SE/Configuration_adv.h
View file

@ -1352,7 +1352,7 @@
#define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm
#define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm
// Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). // Uncomment to enable reporting (required for "G425 V", but consumes flash).
//#define CALIBRATION_REPORTING //#define CALIBRATION_REPORTING
// The true location and dimension the cube/bolt/washer on the bed. // The true location and dimension the cube/bolt/washer on the bed.
@ -2952,6 +2952,7 @@
#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
#define CONFIGURE_FILAMENT_CHANGE // Add M603 G-code and menu items. Requires ~1.3K bytes of flash.
#endif #endif
// @section tmc_smart // @section tmc_smart

2
config/examples/BIQU/B1/Configuration.h
View file

@ -2380,7 +2380,7 @@
*/ */
#define EEPROM_SETTINGS // Persistent storage with M500 and M501 #define EEPROM_SETTINGS // Persistent storage with M500 and M501
//#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release! //#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release!
#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save flash.
#define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors.

3
config/examples/BIQU/B1/Configuration_adv.h
View file

@ -1352,7 +1352,7 @@
#define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm
#define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm
// Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). // Uncomment to enable reporting (required for "G425 V", but consumes flash).
//#define CALIBRATION_REPORTING //#define CALIBRATION_REPORTING
// The true location and dimension the cube/bolt/washer on the bed. // The true location and dimension the cube/bolt/washer on the bed.
@ -2954,6 +2954,7 @@
#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
#define CONFIGURE_FILAMENT_CHANGE // Add M603 G-code and menu items. Requires ~1.3K bytes of flash.
#endif #endif
// @section tmc_smart // @section tmc_smart

2
config/examples/BIQU/BX/Configuration.h
View file

@ -2373,7 +2373,7 @@
*/ */
#define EEPROM_SETTINGS // Persistent storage with M500 and M501 #define EEPROM_SETTINGS // Persistent storage with M500 and M501
//#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release! //#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release!
#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save flash.
#define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors.

3
config/examples/BIQU/BX/Configuration_adv.h
View file

@ -1353,7 +1353,7 @@
#define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm
#define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm
// Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). // Uncomment to enable reporting (required for "G425 V", but consumes flash).
//#define CALIBRATION_REPORTING //#define CALIBRATION_REPORTING
// The true location and dimension the cube/bolt/washer on the bed. // The true location and dimension the cube/bolt/washer on the bed.
@ -2953,6 +2953,7 @@
#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
#define CONFIGURE_FILAMENT_CHANGE // Add M603 G-code and menu items. Requires ~1.3K bytes of flash.
#endif #endif
// @section tmc_smart // @section tmc_smart

2
config/examples/BIQU/Hurakan/Configuration.h
View file

@ -2368,7 +2368,7 @@
*/ */
#define EEPROM_SETTINGS // Persistent storage with M500 and M501 #define EEPROM_SETTINGS // Persistent storage with M500 and M501
//#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release! //#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release!
#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save flash.
#define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
//#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors.

3
config/examples/BIQU/Hurakan/Configuration_adv.h
View file

@ -1353,7 +1353,7 @@
#define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm
#define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm
// Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). // Uncomment to enable reporting (required for "G425 V", but consumes flash).
//#define CALIBRATION_REPORTING //#define CALIBRATION_REPORTING
// The true location and dimension the cube/bolt/washer on the bed. // The true location and dimension the cube/bolt/washer on the bed.
@ -2953,6 +2953,7 @@
#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
#define CONFIGURE_FILAMENT_CHANGE // Add M603 G-code and menu items. Requires ~1.3K bytes of flash.
#endif #endif
// @section tmc_smart // @section tmc_smart

2
config/examples/BIQU/Thunder Standard/Configuration.h
View file

@ -2366,7 +2366,7 @@
*/ */
#define EEPROM_SETTINGS // Persistent storage with M500 and M501 #define EEPROM_SETTINGS // Persistent storage with M500 and M501
//#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release! //#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release!
#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save flash.
#define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors.

3
config/examples/BIQU/Thunder Standard/Configuration_adv.h
View file

@ -1352,7 +1352,7 @@
#define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm
#define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm
// Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). // Uncomment to enable reporting (required for "G425 V", but consumes flash).
//#define CALIBRATION_REPORTING //#define CALIBRATION_REPORTING
// The true location and dimension the cube/bolt/washer on the bed. // The true location and dimension the cube/bolt/washer on the bed.
@ -2952,6 +2952,7 @@
#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
#define CONFIGURE_FILAMENT_CHANGE // Add M603 G-code and menu items. Requires ~1.3K bytes of flash.
#endif #endif
// @section tmc_smart // @section tmc_smart

2
config/examples/BQ/Hephestos/Configuration.h
View file

@ -2367,7 +2367,7 @@
*/ */
//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define EEPROM_SETTINGS // Persistent storage with M500 and M501
//#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release! //#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release!
#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save flash.
#define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
//#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors.

3
config/examples/BQ/Hephestos/Configuration_adv.h
View file

@ -1352,7 +1352,7 @@
#define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm
#define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm
// Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). // Uncomment to enable reporting (required for "G425 V", but consumes flash).
//#define CALIBRATION_REPORTING //#define CALIBRATION_REPORTING
// The true location and dimension the cube/bolt/washer on the bed. // The true location and dimension the cube/bolt/washer on the bed.
@ -2952,6 +2952,7 @@
//#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
#define CONFIGURE_FILAMENT_CHANGE // Add M603 G-code and menu items. Requires ~1.3K bytes of flash.
#endif #endif
// @section tmc_smart // @section tmc_smart

Some files were not shown because too many files have changed in this diff Show more