diff --git a/config/default/Configuration_adv.h b/config/default/Configuration_adv.h index 2bdc9667cc..b587495058 100644 --- a/config/default/Configuration_adv.h +++ b/config/default/Configuration_adv.h @@ -3029,7 +3029,7 @@ //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h index 6be17cac44..a883f728f5 100644 --- a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h +++ b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h @@ -3031,7 +3031,7 @@ //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h index 230fef45c3..e4cf87f22b 100644 --- a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h +++ b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h @@ -3031,7 +3031,7 @@ //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h index f9faada506..493d882c6c 100644 --- a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h +++ b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h @@ -3031,7 +3031,7 @@ //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/AlephObjects/TAZ4/Configuration_adv.h b/config/examples/AlephObjects/TAZ4/Configuration_adv.h index 5cb839d4a8..c241b5aa60 100644 --- a/config/examples/AlephObjects/TAZ4/Configuration_adv.h +++ b/config/examples/AlephObjects/TAZ4/Configuration_adv.h @@ -3031,7 +3031,7 @@ //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h index b38b6d8a10..60fe2b386b 100644 --- a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h +++ b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h @@ -3033,7 +3033,7 @@ //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Alfawise/U20/Configuration_adv.h b/config/examples/Alfawise/U20/Configuration_adv.h index 3482b10bce..541b653446 100644 --- a/config/examples/Alfawise/U20/Configuration_adv.h +++ b/config/examples/Alfawise/U20/Configuration_adv.h @@ -3032,7 +3032,7 @@ //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/AliExpress/UM2pExt/Configuration_adv.h b/config/examples/AliExpress/UM2pExt/Configuration_adv.h index 1ab097a40b..8cfad3d451 100644 --- a/config/examples/AliExpress/UM2pExt/Configuration_adv.h +++ b/config/examples/AliExpress/UM2pExt/Configuration_adv.h @@ -3033,7 +3033,7 @@ //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Anet/A2/Configuration_adv.h b/config/examples/Anet/A2/Configuration_adv.h index 9a6e5d8f45..fbc6f521a4 100644 --- a/config/examples/Anet/A2/Configuration_adv.h +++ b/config/examples/Anet/A2/Configuration_adv.h @@ -3031,7 +3031,7 @@ //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Anet/A2plus/Configuration_adv.h b/config/examples/Anet/A2plus/Configuration_adv.h index 4fec2bba35..199c9bb8a8 100644 --- a/config/examples/Anet/A2plus/Configuration_adv.h +++ b/config/examples/Anet/A2plus/Configuration_adv.h @@ -3031,7 +3031,7 @@ //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Anet/A6/Configuration_adv.h b/config/examples/Anet/A6/Configuration_adv.h index e2cbce6570..b7b09e02f5 100644 --- a/config/examples/Anet/A6/Configuration_adv.h +++ b/config/examples/Anet/A6/Configuration_adv.h @@ -3031,7 +3031,7 @@ //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Anet/A8/Configuration_adv.h b/config/examples/Anet/A8/Configuration_adv.h index 7cc1fb3535..ffc8a77d7b 100644 --- a/config/examples/Anet/A8/Configuration_adv.h +++ b/config/examples/Anet/A8/Configuration_adv.h @@ -3031,7 +3031,7 @@ //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Anet/A8plus/Configuration_adv.h b/config/examples/Anet/A8plus/Configuration_adv.h index b2a6d84df3..804f49a915 100644 --- a/config/examples/Anet/A8plus/Configuration_adv.h +++ b/config/examples/Anet/A8plus/Configuration_adv.h @@ -3031,7 +3031,7 @@ //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Anet/E10/Configuration_adv.h b/config/examples/Anet/E10/Configuration_adv.h index 76a63371c4..a7f1216e30 100644 --- a/config/examples/Anet/E10/Configuration_adv.h +++ b/config/examples/Anet/E10/Configuration_adv.h @@ -3031,7 +3031,7 @@ //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Anet/E16/Configuration_adv.h b/config/examples/Anet/E16/Configuration_adv.h index ee38562e6e..ddd7978b4d 100644 --- a/config/examples/Anet/E16/Configuration_adv.h +++ b/config/examples/Anet/E16/Configuration_adv.h @@ -3031,7 +3031,7 @@ //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/AnyCubic/Mega Zero/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero/Configuration_adv.h index 54bd949599..6500611b74 100644 --- a/config/examples/AnyCubic/Mega Zero/Configuration_adv.h +++ b/config/examples/AnyCubic/Mega Zero/Configuration_adv.h @@ -3031,7 +3031,7 @@ //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/AnyCubic/i3/Configuration_adv.h b/config/examples/AnyCubic/i3/Configuration_adv.h index df2ca4a955..2d2ea7bb6d 100644 --- a/config/examples/AnyCubic/i3/Configuration_adv.h +++ b/config/examples/AnyCubic/i3/Configuration_adv.h @@ -3031,7 +3031,7 @@ //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/ArmEd/Configuration_adv.h b/config/examples/ArmEd/Configuration_adv.h index eb929170a1..54b82b682b 100644 --- a/config/examples/ArmEd/Configuration_adv.h +++ b/config/examples/ArmEd/Configuration_adv.h @@ -3035,7 +3035,7 @@ //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Artillery/Genius/Configuration_adv.h b/config/examples/Artillery/Genius/Configuration_adv.h index 1175372a38..3e4730b431 100755 --- a/config/examples/Artillery/Genius/Configuration_adv.h +++ b/config/examples/Artillery/Genius/Configuration_adv.h @@ -3031,7 +3031,7 @@ //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Artillery/Sidewinder X1/Configuration_adv.h b/config/examples/Artillery/Sidewinder X1/Configuration_adv.h index 5a9e03ea19..4732de8cde 100755 --- a/config/examples/Artillery/Sidewinder X1/Configuration_adv.h +++ b/config/examples/Artillery/Sidewinder X1/Configuration_adv.h @@ -3031,7 +3031,7 @@ //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration_adv.h b/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration_adv.h index 4477354177..d92ea0a274 100644 --- a/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration_adv.h +++ b/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration_adv.h @@ -3031,7 +3031,7 @@ //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h index b0aae7c190..a75c5620a0 100644 --- a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h @@ -3031,7 +3031,7 @@ //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/BIBO/TouchX/default/Configuration_adv.h b/config/examples/BIBO/TouchX/default/Configuration_adv.h index 87b844486c..c8a9a7c4d7 100644 --- a/config/examples/BIBO/TouchX/default/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/default/Configuration_adv.h @@ -3031,7 +3031,7 @@ //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/BQ/Hephestos/Configuration_adv.h b/config/examples/BQ/Hephestos/Configuration_adv.h index 22289af1a9..c1e8e77af4 100644 --- a/config/examples/BQ/Hephestos/Configuration_adv.h +++ b/config/examples/BQ/Hephestos/Configuration_adv.h @@ -3031,7 +3031,7 @@ //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/BQ/Hephestos_2/Configuration_adv.h b/config/examples/BQ/Hephestos_2/Configuration_adv.h index ea67d7c32b..d25ee9ded3 100644 --- a/config/examples/BQ/Hephestos_2/Configuration_adv.h +++ b/config/examples/BQ/Hephestos_2/Configuration_adv.h @@ -3039,7 +3039,7 @@ //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/BQ/WITBOX/Configuration_adv.h b/config/examples/BQ/WITBOX/Configuration_adv.h index e98138bfad..bc337b7332 100644 --- a/config/examples/BQ/WITBOX/Configuration_adv.h +++ b/config/examples/BQ/WITBOX/Configuration_adv.h @@ -3031,7 +3031,7 @@ //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Cartesio/Configuration_adv.h b/config/examples/Cartesio/Configuration_adv.h index 30a6766250..a6bb0d6154 100644 --- a/config/examples/Cartesio/Configuration_adv.h +++ b/config/examples/Cartesio/Configuration_adv.h @@ -3031,7 +3031,7 @@ //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Creality/CR-10 V2/Configuration_adv.h b/config/examples/Creality/CR-10 V2/Configuration_adv.h index 14673030bc..02cf5ddd2e 100644 --- a/config/examples/Creality/CR-10 V2/Configuration_adv.h +++ b/config/examples/Creality/CR-10 V2/Configuration_adv.h @@ -3037,7 +3037,7 @@ //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Creality/CR-10/Configuration_adv.h b/config/examples/Creality/CR-10/Configuration_adv.h index 3953680e91..085c345103 100644 --- a/config/examples/Creality/CR-10/Configuration_adv.h +++ b/config/examples/Creality/CR-10/Configuration_adv.h @@ -3034,7 +3034,7 @@ //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Creality/CR-10S/Configuration_adv.h b/config/examples/Creality/CR-10S/Configuration_adv.h index 2ee18d304e..21f3146651 100644 --- a/config/examples/Creality/CR-10S/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/Configuration_adv.h @@ -3031,7 +3031,7 @@ //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Creality/CR-10_5S/Configuration_adv.h b/config/examples/Creality/CR-10_5S/Configuration_adv.h index 31c5d986dd..9127fffeb0 100644 --- a/config/examples/Creality/CR-10_5S/Configuration_adv.h +++ b/config/examples/Creality/CR-10_5S/Configuration_adv.h @@ -3031,7 +3031,7 @@ //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Creality/CR-10mini/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10mini/CrealityV1/Configuration_adv.h index a91d929136..eb22d5a4d2 100644 --- a/config/examples/Creality/CR-10mini/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10mini/CrealityV1/Configuration_adv.h @@ -3031,7 +3031,7 @@ //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Creality/CR-10mini/MEEB-3DP/Configuration_adv.h b/config/examples/Creality/CR-10mini/MEEB-3DP/Configuration_adv.h index 7a3660e059..220ae690a2 100644 --- a/config/examples/Creality/CR-10mini/MEEB-3DP/Configuration_adv.h +++ b/config/examples/Creality/CR-10mini/MEEB-3DP/Configuration_adv.h @@ -3031,7 +3031,7 @@ //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Creality/CR-20 Pro/Configuration_adv.h b/config/examples/Creality/CR-20 Pro/Configuration_adv.h index 4c51efa0c3..1177eb6f75 100644 --- a/config/examples/Creality/CR-20 Pro/Configuration_adv.h +++ b/config/examples/Creality/CR-20 Pro/Configuration_adv.h @@ -3031,7 +3031,7 @@ //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Creality/CR-20/Configuration_adv.h b/config/examples/Creality/CR-20/Configuration_adv.h index 0063831de8..365ec701e6 100644 --- a/config/examples/Creality/CR-20/Configuration_adv.h +++ b/config/examples/Creality/CR-20/Configuration_adv.h @@ -3031,7 +3031,7 @@ //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Creality/CR-8/Configuration_adv.h b/config/examples/Creality/CR-8/Configuration_adv.h index ee2cb2b6ad..d82d912c31 100644 --- a/config/examples/Creality/CR-8/Configuration_adv.h +++ b/config/examples/Creality/CR-8/Configuration_adv.h @@ -3031,7 +3031,7 @@ //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Creality/Ender-2/Configuration_adv.h b/config/examples/Creality/Ender-2/Configuration_adv.h index 962587a565..a2841f11a6 100644 --- a/config/examples/Creality/Ender-2/Configuration_adv.h +++ b/config/examples/Creality/Ender-2/Configuration_adv.h @@ -3031,7 +3031,7 @@ //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Creality/Ender-3 Pro/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/Configuration_adv.h index b34e62f816..c032aff84c 100644 --- a/config/examples/Creality/Ender-3 Pro/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/Configuration_adv.h @@ -3031,7 +3031,7 @@ //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Creality/Ender-3 V2/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/Configuration_adv.h index 0faf68a5d6..8c03bf627c 100644 --- a/config/examples/Creality/Ender-3 V2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/Configuration_adv.h @@ -3032,7 +3032,7 @@ //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h index 1ed43da000..d8b071b545 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h @@ -3033,7 +3033,7 @@ //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index 46a4d78032..1a2c808a1a 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -3033,7 +3033,7 @@ //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 75fb92b1e0..492d9733d0 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -3031,7 +3031,7 @@ //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h index fafcce4983..7663342e1f 100644 --- a/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h @@ -3031,7 +3031,7 @@ //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h index afb86d4aaf..454a5b646e 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h @@ -3031,7 +3031,7 @@ //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h index 4b8f81c529..04bf4e8bd2 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h @@ -3031,7 +3031,7 @@ //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h index 477bfd7876..6862ec26a3 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h @@ -3031,7 +3031,7 @@ //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h index e7f0291192..7fdd50d81c 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h @@ -3031,7 +3031,7 @@ //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h index b1551020b8..ce38358725 100644 --- a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h @@ -3031,7 +3031,7 @@ //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Creality/Ender-3/MEEB-3DP/_Statusscreen.h b/config/examples/Creality/Ender-3/MEEB-3DP/_Statusscreen.h index a517f8467e..e52e1ab3d5 100644 --- a/config/examples/Creality/Ender-3/MEEB-3DP/_Statusscreen.h +++ b/config/examples/Creality/Ender-3/MEEB-3DP/_Statusscreen.h @@ -20,7 +20,7 @@ * */ #pragma once - + #define CONFIG_EXAMPLES_DIR "Creality/Ender-3/MEEB-3DP" #define STATUS_LOGO_X 0 diff --git a/config/examples/Creality/Ender-4/Configuration_adv.h b/config/examples/Creality/Ender-4/Configuration_adv.h index 7d30c03619..39b733f6f5 100644 --- a/config/examples/Creality/Ender-4/Configuration_adv.h +++ b/config/examples/Creality/Ender-4/Configuration_adv.h @@ -3031,7 +3031,7 @@ //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Creality/Ender-5 Pro/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/Configuration_adv.h index 357c7a26ef..32ba4c6211 100644 --- a/config/examples/Creality/Ender-5 Pro/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/Configuration_adv.h @@ -3031,7 +3031,7 @@ //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index bc23c8824d..29ec76f8a5 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -3031,7 +3031,7 @@ //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Creality/Ender-5/Creality/Configuration_adv.h b/config/examples/Creality/Ender-5/Creality/Configuration_adv.h index 02e310883a..391657f31d 100644 --- a/config/examples/Creality/Ender-5/Creality/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/Creality/Configuration_adv.h @@ -3031,7 +3031,7 @@ //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Creality/Ender-5_Plus/Configuration_adv.h b/config/examples/Creality/Ender-5_Plus/Configuration_adv.h index 4ef6e033f4..4970d6521b 100644 --- a/config/examples/Creality/Ender-5_Plus/Configuration_adv.h +++ b/config/examples/Creality/Ender-5_Plus/Configuration_adv.h @@ -3031,7 +3031,7 @@ //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h index 21dc0b1828..b8547f56a9 100644 --- a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h +++ b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h @@ -3031,7 +3031,7 @@ //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Daycom/3DP-100/Configuration_adv.h b/config/examples/Daycom/3DP-100/Configuration_adv.h index 561329fd6d..fc01d217a8 100644 --- a/config/examples/Daycom/3DP-100/Configuration_adv.h +++ b/config/examples/Daycom/3DP-100/Configuration_adv.h @@ -3030,8 +3030,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h b/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h index e9f0fd1046..a62d47b0e5 100644 --- a/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h +++ b/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h @@ -3030,8 +3030,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Einstart-S/Configuration_adv.h b/config/examples/Einstart-S/Configuration_adv.h index 1dad821747..7df06f60a1 100644 --- a/config/examples/Einstart-S/Configuration_adv.h +++ b/config/examples/Einstart-S/Configuration_adv.h @@ -3030,8 +3030,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/FYSETC/AIO_II/Configuration_adv.h b/config/examples/FYSETC/AIO_II/Configuration_adv.h index ffb3274d56..32dba9a409 100644 --- a/config/examples/FYSETC/AIO_II/Configuration_adv.h +++ b/config/examples/FYSETC/AIO_II/Configuration_adv.h @@ -3030,8 +3030,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/FYSETC/F6_13/Configuration_adv.h b/config/examples/FYSETC/F6_13/Configuration_adv.h index 363d527aa2..b41456e22a 100644 --- a/config/examples/FYSETC/F6_13/Configuration_adv.h +++ b/config/examples/FYSETC/F6_13/Configuration_adv.h @@ -3030,8 +3030,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/FYSETC/S6/Configuration_adv.h b/config/examples/FYSETC/S6/Configuration_adv.h index 56a58cda38..cf4053b33f 100644 --- a/config/examples/FYSETC/S6/Configuration_adv.h +++ b/config/examples/FYSETC/S6/Configuration_adv.h @@ -3030,8 +3030,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Felix/DUAL/Configuration_adv.h b/config/examples/Felix/DUAL/Configuration_adv.h index 00a8bb6f53..0c6b5b3cee 100644 --- a/config/examples/Felix/DUAL/Configuration_adv.h +++ b/config/examples/Felix/DUAL/Configuration_adv.h @@ -3030,8 +3030,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Felix/Single/Configuration_adv.h b/config/examples/Felix/Single/Configuration_adv.h index 7e18c57473..7200f3d667 100644 --- a/config/examples/Felix/Single/Configuration_adv.h +++ b/config/examples/Felix/Single/Configuration_adv.h @@ -3030,8 +3030,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/FlashForge/Creator 2X/Configuration_adv.h b/config/examples/FlashForge/Creator 2X/Configuration_adv.h index 2a526bd933..005eb789bd 100644 --- a/config/examples/FlashForge/Creator 2X/Configuration_adv.h +++ b/config/examples/FlashForge/Creator 2X/Configuration_adv.h @@ -3030,8 +3030,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/FlashForge/CreatorPro/Configuration_adv.h b/config/examples/FlashForge/CreatorPro/Configuration_adv.h index a1d4aebb4d..aea3cbeade 100644 --- a/config/examples/FlashForge/CreatorPro/Configuration_adv.h +++ b/config/examples/FlashForge/CreatorPro/Configuration_adv.h @@ -3029,8 +3029,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/FlyingBear/P905H/Configuration_adv.h b/config/examples/FlyingBear/P905H/Configuration_adv.h index e8a3bd4e97..4aedf70210 100644 --- a/config/examples/FlyingBear/P905H/Configuration_adv.h +++ b/config/examples/FlyingBear/P905H/Configuration_adv.h @@ -3034,8 +3034,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/config/examples/FolgerTech/i3-2020/Configuration_adv.h index bc242b612b..07978baff0 100644 --- a/config/examples/FolgerTech/i3-2020/Configuration_adv.h +++ b/config/examples/FolgerTech/i3-2020/Configuration_adv.h @@ -3030,8 +3030,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Formbot/Raptor/Configuration_adv.h b/config/examples/Formbot/Raptor/Configuration_adv.h index 83424f1518..8c829ff3a6 100644 --- a/config/examples/Formbot/Raptor/Configuration_adv.h +++ b/config/examples/Formbot/Raptor/Configuration_adv.h @@ -3032,8 +3032,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h index 571d4a2144..b401897ffc 100644 --- a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h +++ b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h @@ -3031,8 +3031,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Formbot/T_Rex_3/Configuration_adv.h b/config/examples/Formbot/T_Rex_3/Configuration_adv.h index 12d8e117fa..1489de8c04 100644 --- a/config/examples/Formbot/T_Rex_3/Configuration_adv.h +++ b/config/examples/Formbot/T_Rex_3/Configuration_adv.h @@ -3035,8 +3035,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Geeetech/A10/Configuration_adv.h b/config/examples/Geeetech/A10/Configuration_adv.h index 8d2eb89ab6..4752cabc3f 100644 --- a/config/examples/Geeetech/A10/Configuration_adv.h +++ b/config/examples/Geeetech/A10/Configuration_adv.h @@ -3030,8 +3030,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Geeetech/A10D/Configuration_adv.h b/config/examples/Geeetech/A10D/Configuration_adv.h index ba4a58d340..c1e43a5c1c 100644 --- a/config/examples/Geeetech/A10D/Configuration_adv.h +++ b/config/examples/Geeetech/A10D/Configuration_adv.h @@ -3030,8 +3030,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Geeetech/A10M/Configuration_adv.h b/config/examples/Geeetech/A10M/Configuration_adv.h index 11fe8a75c4..8ee33e04e0 100644 --- a/config/examples/Geeetech/A10M/Configuration_adv.h +++ b/config/examples/Geeetech/A10M/Configuration_adv.h @@ -3030,8 +3030,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Geeetech/A10T/Configuration_adv.h b/config/examples/Geeetech/A10T/Configuration_adv.h index da02201a9b..54d29aee66 100644 --- a/config/examples/Geeetech/A10T/Configuration_adv.h +++ b/config/examples/Geeetech/A10T/Configuration_adv.h @@ -3030,8 +3030,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Geeetech/A20/Configuration_adv.h b/config/examples/Geeetech/A20/Configuration_adv.h index 8683b10d34..0fc2ba8b4b 100644 --- a/config/examples/Geeetech/A20/Configuration_adv.h +++ b/config/examples/Geeetech/A20/Configuration_adv.h @@ -3030,8 +3030,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Geeetech/A20M/Configuration_adv.h b/config/examples/Geeetech/A20M/Configuration_adv.h index 8319092e21..a005f5c185 100644 --- a/config/examples/Geeetech/A20M/Configuration_adv.h +++ b/config/examples/Geeetech/A20M/Configuration_adv.h @@ -3030,8 +3030,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Geeetech/A20T/Configuration_adv.h b/config/examples/Geeetech/A20T/Configuration_adv.h index 411d03a13e..eef6cb4cd1 100644 --- a/config/examples/Geeetech/A20T/Configuration_adv.h +++ b/config/examples/Geeetech/A20T/Configuration_adv.h @@ -3030,8 +3030,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Geeetech/A30/Configuration_adv.h b/config/examples/Geeetech/A30/Configuration_adv.h index 294cbe6f76..9c5b0b2d7b 100644 --- a/config/examples/Geeetech/A30/Configuration_adv.h +++ b/config/examples/Geeetech/A30/Configuration_adv.h @@ -3029,8 +3029,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Geeetech/D200/Configuration_adv.h b/config/examples/Geeetech/D200/Configuration_adv.h index f915edbb10..c7782bcc4f 100644 --- a/config/examples/Geeetech/D200/Configuration_adv.h +++ b/config/examples/Geeetech/D200/Configuration_adv.h @@ -3030,8 +3030,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Geeetech/Duplicator5/Configuration_adv.h b/config/examples/Geeetech/Duplicator5/Configuration_adv.h index 0646d83335..fcd6516eb7 100644 --- a/config/examples/Geeetech/Duplicator5/Configuration_adv.h +++ b/config/examples/Geeetech/Duplicator5/Configuration_adv.h @@ -3030,8 +3030,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Geeetech/E180/Configuration_adv.h b/config/examples/Geeetech/E180/Configuration_adv.h index 36efe190eb..0616937065 100644 --- a/config/examples/Geeetech/E180/Configuration_adv.h +++ b/config/examples/Geeetech/E180/Configuration_adv.h @@ -3029,8 +3029,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Geeetech/M201/Configuration_adv.h b/config/examples/Geeetech/M201/Configuration_adv.h index dd07adfc75..8f1b842f88 100644 --- a/config/examples/Geeetech/M201/Configuration_adv.h +++ b/config/examples/Geeetech/M201/Configuration_adv.h @@ -3030,8 +3030,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Geeetech/MeCreator2/Configuration_adv.h b/config/examples/Geeetech/MeCreator2/Configuration_adv.h index 4739341989..890123e10f 100644 --- a/config/examples/Geeetech/MeCreator2/Configuration_adv.h +++ b/config/examples/Geeetech/MeCreator2/Configuration_adv.h @@ -3029,8 +3029,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Geeetech/Me_creator/Configuration_adv.h b/config/examples/Geeetech/Me_creator/Configuration_adv.h index db18896bed..7816ae3c70 100644 --- a/config/examples/Geeetech/Me_creator/Configuration_adv.h +++ b/config/examples/Geeetech/Me_creator/Configuration_adv.h @@ -3030,8 +3030,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Geeetech/Me_ducer/Configuration_adv.h b/config/examples/Geeetech/Me_ducer/Configuration_adv.h index 5ec8199913..a23ee72e9e 100644 --- a/config/examples/Geeetech/Me_ducer/Configuration_adv.h +++ b/config/examples/Geeetech/Me_ducer/Configuration_adv.h @@ -3030,8 +3030,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Geeetech/PI3A PRO/Configuration_adv.h b/config/examples/Geeetech/PI3A PRO/Configuration_adv.h index b83ce7684c..ff3a95f505 100644 --- a/config/examples/Geeetech/PI3A PRO/Configuration_adv.h +++ b/config/examples/Geeetech/PI3A PRO/Configuration_adv.h @@ -3030,8 +3030,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h index c538836358..f3009986c9 100644 --- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h @@ -3030,8 +3030,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h index fc6a6132c6..0af70d141c 100644 --- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h @@ -3030,8 +3030,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/HMS434/Configuration_adv.h b/config/examples/HMS434/Configuration_adv.h index 4197dbe71d..5bb7f4b41a 100644 --- a/config/examples/HMS434/Configuration_adv.h +++ b/config/examples/HMS434/Configuration_adv.h @@ -3021,8 +3021,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Infitary/i3-M508/Configuration_adv.h b/config/examples/Infitary/i3-M508/Configuration_adv.h index 09eba2f430..e7ba4c6b3b 100644 --- a/config/examples/Infitary/i3-M508/Configuration_adv.h +++ b/config/examples/Infitary/i3-M508/Configuration_adv.h @@ -3030,8 +3030,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Intamsys/FunmatHT_4988/Configuration_adv.h b/config/examples/Intamsys/FunmatHT_4988/Configuration_adv.h index f15c4754c9..1985247dd5 100644 --- a/config/examples/Intamsys/FunmatHT_4988/Configuration_adv.h +++ b/config/examples/Intamsys/FunmatHT_4988/Configuration_adv.h @@ -3030,8 +3030,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/JGAurora/A1/Configuration_adv.h b/config/examples/JGAurora/A1/Configuration_adv.h index 093a62d00f..c840026bd3 100644 --- a/config/examples/JGAurora/A1/Configuration_adv.h +++ b/config/examples/JGAurora/A1/Configuration_adv.h @@ -3035,8 +3035,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/JGAurora/A5/Configuration_adv.h b/config/examples/JGAurora/A5/Configuration_adv.h index f964e2b8ba..9012ae899a 100644 --- a/config/examples/JGAurora/A5/Configuration_adv.h +++ b/config/examples/JGAurora/A5/Configuration_adv.h @@ -3030,8 +3030,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/JGAurora/A5S/Configuration_adv.h b/config/examples/JGAurora/A5S/Configuration_adv.h index 0d49e49811..76c2732f55 100644 --- a/config/examples/JGAurora/A5S/Configuration_adv.h +++ b/config/examples/JGAurora/A5S/Configuration_adv.h @@ -3035,8 +3035,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/JGAurora/Magic/Configuration_adv.h b/config/examples/JGAurora/Magic/Configuration_adv.h index ee37a4a225..e4e2617b84 100644 --- a/config/examples/JGAurora/Magic/Configuration_adv.h +++ b/config/examples/JGAurora/Magic/Configuration_adv.h @@ -3030,8 +3030,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Kingroon/KP3/Configuration_adv.h b/config/examples/Kingroon/KP3/Configuration_adv.h index e730cfc59f..ccca43ade8 100644 --- a/config/examples/Kingroon/KP3/Configuration_adv.h +++ b/config/examples/Kingroon/KP3/Configuration_adv.h @@ -3030,8 +3030,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/MBot/Cube/Configuration_adv.h b/config/examples/MBot/Cube/Configuration_adv.h index 514aa27e3a..b27ac1efb0 100644 --- a/config/examples/MBot/Cube/Configuration_adv.h +++ b/config/examples/MBot/Cube/Configuration_adv.h @@ -3030,8 +3030,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/MakerFarm/Pegasus_12/Configuration_adv.h b/config/examples/MakerFarm/Pegasus_12/Configuration_adv.h index a60a6e9eee..8543025b50 100644 --- a/config/examples/MakerFarm/Pegasus_12/Configuration_adv.h +++ b/config/examples/MakerFarm/Pegasus_12/Configuration_adv.h @@ -3023,8 +3023,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/MakerParts/Configuration_adv.h b/config/examples/MakerParts/Configuration_adv.h index 4cd21039da..8e5752f356 100644 --- a/config/examples/MakerParts/Configuration_adv.h +++ b/config/examples/MakerParts/Configuration_adv.h @@ -3030,8 +3030,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Malyan/M150/Configuration_adv.h b/config/examples/Malyan/M150/Configuration_adv.h index be5d16b5a6..2b084eb466 100644 --- a/config/examples/Malyan/M150/Configuration_adv.h +++ b/config/examples/Malyan/M150/Configuration_adv.h @@ -3030,8 +3030,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Malyan/M200/Configuration_adv.h b/config/examples/Malyan/M200/Configuration_adv.h index 522605e12f..0ca69367a3 100644 --- a/config/examples/Malyan/M200/Configuration_adv.h +++ b/config/examples/Malyan/M200/Configuration_adv.h @@ -3032,8 +3032,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/config/examples/Micromake/C1/enhanced/Configuration_adv.h index 23bc51a7e7..fff21945b6 100644 --- a/config/examples/Micromake/C1/enhanced/Configuration_adv.h +++ b/config/examples/Micromake/C1/enhanced/Configuration_adv.h @@ -3030,8 +3030,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Mks/Robin/Configuration_adv.h b/config/examples/Mks/Robin/Configuration_adv.h index 75381c262c..a0f4513596 100644 --- a/config/examples/Mks/Robin/Configuration_adv.h +++ b/config/examples/Mks/Robin/Configuration_adv.h @@ -3030,8 +3030,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Mks/Sbase/Configuration_adv.h b/config/examples/Mks/Sbase/Configuration_adv.h index 430b76b4d7..7a2c36acd6 100644 --- a/config/examples/Mks/Sbase/Configuration_adv.h +++ b/config/examples/Mks/Sbase/Configuration_adv.h @@ -3030,8 +3030,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Modix/Big60/Configuration_adv.h b/config/examples/Modix/Big60/Configuration_adv.h index 573b47a01b..7555cf8b3f 100644 --- a/config/examples/Modix/Big60/Configuration_adv.h +++ b/config/examples/Modix/Big60/Configuration_adv.h @@ -3030,8 +3030,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Ortur 4/Configuration_adv.h b/config/examples/Ortur 4/Configuration_adv.h index 89e8bfad5a..0d01936810 100644 --- a/config/examples/Ortur 4/Configuration_adv.h +++ b/config/examples/Ortur 4/Configuration_adv.h @@ -3030,8 +3030,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h index 1e0456142c..a9b32bb402 100644 --- a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h +++ b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h @@ -3030,8 +3030,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Qidi/Qidi 1/Configuration_adv.h b/config/examples/Qidi/Qidi 1/Configuration_adv.h index c416e92b14..7e034af7a4 100644 --- a/config/examples/Qidi/Qidi 1/Configuration_adv.h +++ b/config/examples/Qidi/Qidi 1/Configuration_adv.h @@ -3030,8 +3030,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/RapideLite/RL200/Configuration_adv.h b/config/examples/RapideLite/RL200/Configuration_adv.h index 04b285e47b..9f6415877d 100644 --- a/config/examples/RapideLite/RL200/Configuration_adv.h +++ b/config/examples/RapideLite/RL200/Configuration_adv.h @@ -3030,8 +3030,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Renkforce/RF100/Configuration_adv.h b/config/examples/Renkforce/RF100/Configuration_adv.h index f26e7226b6..b50624a28a 100644 --- a/config/examples/Renkforce/RF100/Configuration_adv.h +++ b/config/examples/Renkforce/RF100/Configuration_adv.h @@ -3030,8 +3030,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Renkforce/RF100XL/Configuration_adv.h b/config/examples/Renkforce/RF100XL/Configuration_adv.h index aae1608f16..8c8565ad33 100644 --- a/config/examples/Renkforce/RF100XL/Configuration_adv.h +++ b/config/examples/Renkforce/RF100XL/Configuration_adv.h @@ -3030,8 +3030,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Renkforce/RF100v2/Configuration_adv.h b/config/examples/Renkforce/RF100v2/Configuration_adv.h index e848c70287..5339586629 100644 --- a/config/examples/Renkforce/RF100v2/Configuration_adv.h +++ b/config/examples/Renkforce/RF100v2/Configuration_adv.h @@ -3030,8 +3030,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/RigidBot/Configuration_adv.h b/config/examples/RigidBot/Configuration_adv.h index 37c668017a..60f2fa1df7 100644 --- a/config/examples/RigidBot/Configuration_adv.h +++ b/config/examples/RigidBot/Configuration_adv.h @@ -3030,8 +3030,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/SCARA/MP_SCARA/Configuration_adv.h b/config/examples/SCARA/MP_SCARA/Configuration_adv.h index c8c40ed24a..74f9e47c8f 100644 --- a/config/examples/SCARA/MP_SCARA/Configuration_adv.h +++ b/config/examples/SCARA/MP_SCARA/Configuration_adv.h @@ -3027,8 +3027,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/SCARA/Morgan/Configuration_adv.h b/config/examples/SCARA/Morgan/Configuration_adv.h index 07fc3a6ded..b87edc7404 100644 --- a/config/examples/SCARA/Morgan/Configuration_adv.h +++ b/config/examples/SCARA/Morgan/Configuration_adv.h @@ -3027,8 +3027,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h index 3dd5679650..52f2ab1a6f 100644 --- a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h +++ b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h @@ -3030,8 +3030,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Sanguinololu/Configuration_adv.h b/config/examples/Sanguinololu/Configuration_adv.h index 95c8bac43a..d5f5aead8e 100644 --- a/config/examples/Sanguinololu/Configuration_adv.h +++ b/config/examples/Sanguinololu/Configuration_adv.h @@ -3030,8 +3030,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Sovol/SV-01/Configuration_adv.h b/config/examples/Sovol/SV-01/Configuration_adv.h index bf54f3ef4c..e8d996af4a 100644 --- a/config/examples/Sovol/SV-01/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/Configuration_adv.h @@ -3019,8 +3019,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Tevo/Michelangelo/Configuration_adv.h b/config/examples/Tevo/Michelangelo/Configuration_adv.h index 281f63b6b5..87af20e08e 100644 --- a/config/examples/Tevo/Michelangelo/Configuration_adv.h +++ b/config/examples/Tevo/Michelangelo/Configuration_adv.h @@ -3030,8 +3030,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Tevo/Nereus/Configuration_adv.h b/config/examples/Tevo/Nereus/Configuration_adv.h index dc47c9da98..8676d89fb2 100755 --- a/config/examples/Tevo/Nereus/Configuration_adv.h +++ b/config/examples/Tevo/Nereus/Configuration_adv.h @@ -3030,8 +3030,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Tevo/Tarantula Pro/Configuration_adv.h b/config/examples/Tevo/Tarantula Pro/Configuration_adv.h index 7cffee94f8..944a1a70c9 100755 --- a/config/examples/Tevo/Tarantula Pro/Configuration_adv.h +++ b/config/examples/Tevo/Tarantula Pro/Configuration_adv.h @@ -3030,8 +3030,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h index cbc290529f..1451c3ee08 100755 --- a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h +++ b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h @@ -3030,8 +3030,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h index 65c8529416..7cf99a1da6 100755 --- a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h +++ b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h @@ -3030,8 +3030,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/TheBorg/Configuration_adv.h b/config/examples/TheBorg/Configuration_adv.h index 3c7c20f9e8..114f454b96 100644 --- a/config/examples/TheBorg/Configuration_adv.h +++ b/config/examples/TheBorg/Configuration_adv.h @@ -3030,8 +3030,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/TinyBoy2/Configuration_adv.h b/config/examples/TinyBoy2/Configuration_adv.h index 6e415afb81..0f126afc3c 100644 --- a/config/examples/TinyBoy2/Configuration_adv.h +++ b/config/examples/TinyBoy2/Configuration_adv.h @@ -3030,8 +3030,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Tronxy/X3A/Configuration_adv.h b/config/examples/Tronxy/X3A/Configuration_adv.h index b96ffe87ed..d057a26fe2 100644 --- a/config/examples/Tronxy/X3A/Configuration_adv.h +++ b/config/examples/Tronxy/X3A/Configuration_adv.h @@ -3030,8 +3030,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Tronxy/X5S-2E/Configuration_adv.h b/config/examples/Tronxy/X5S-2E/Configuration_adv.h index 45aee053f3..697d81d570 100644 --- a/config/examples/Tronxy/X5S-2E/Configuration_adv.h +++ b/config/examples/Tronxy/X5S-2E/Configuration_adv.h @@ -3030,8 +3030,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Tronxy/X5SA/Configuration_adv.h b/config/examples/Tronxy/X5SA/Configuration_adv.h index bb231b785f..170e84dbf1 100644 --- a/config/examples/Tronxy/X5SA/Configuration_adv.h +++ b/config/examples/Tronxy/X5SA/Configuration_adv.h @@ -3030,8 +3030,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/UltiMachine/Archim1/Configuration_adv.h b/config/examples/UltiMachine/Archim1/Configuration_adv.h index 54fa24794b..0b532ae6f4 100644 --- a/config/examples/UltiMachine/Archim1/Configuration_adv.h +++ b/config/examples/UltiMachine/Archim1/Configuration_adv.h @@ -3030,8 +3030,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/UltiMachine/Archim2/Configuration_adv.h b/config/examples/UltiMachine/Archim2/Configuration_adv.h index bc19bbb75c..b3344e22ba 100644 --- a/config/examples/UltiMachine/Archim2/Configuration_adv.h +++ b/config/examples/UltiMachine/Archim2/Configuration_adv.h @@ -3030,8 +3030,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/VORONDesign/Configuration_adv.h b/config/examples/VORONDesign/Configuration_adv.h index 52e2e85052..538a28063c 100644 --- a/config/examples/VORONDesign/Configuration_adv.h +++ b/config/examples/VORONDesign/Configuration_adv.h @@ -3030,8 +3030,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Velleman/K8200/Configuration_adv.h b/config/examples/Velleman/K8200/Configuration_adv.h index c02f40870c..99b8fa5799 100644 --- a/config/examples/Velleman/K8200/Configuration_adv.h +++ b/config/examples/Velleman/K8200/Configuration_adv.h @@ -3043,8 +3043,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h b/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h index 716e720787..9541c833b5 100644 --- a/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h +++ b/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h @@ -3030,8 +3030,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Velleman/K8400/Single-head/Configuration_adv.h b/config/examples/Velleman/K8400/Single-head/Configuration_adv.h index 2b90ca3245..6482c67825 100644 --- a/config/examples/Velleman/K8400/Single-head/Configuration_adv.h +++ b/config/examples/Velleman/K8400/Single-head/Configuration_adv.h @@ -3030,8 +3030,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/WASP/PowerWASP/Configuration_adv.h b/config/examples/WASP/PowerWASP/Configuration_adv.h index 6ed9cf654e..8de322af7f 100644 --- a/config/examples/WASP/PowerWASP/Configuration_adv.h +++ b/config/examples/WASP/PowerWASP/Configuration_adv.h @@ -3030,8 +3030,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h b/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h index c2dfd7c809..3ac0ec1e2b 100644 --- a/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h @@ -3030,8 +3030,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h index 84b680da77..82118f4fe2 100644 --- a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h @@ -3032,8 +3032,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h index d4c71d6de8..e4fcd9b3fc 100644 --- a/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h @@ -3030,8 +3030,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h index 02741595f9..6598030a16 100644 --- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h @@ -3030,8 +3030,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Weistek/wt150/Configuration_adv.h b/config/examples/Weistek/wt150/Configuration_adv.h index 562c8b2467..20509576a0 100644 --- a/config/examples/Weistek/wt150/Configuration_adv.h +++ b/config/examples/Weistek/wt150/Configuration_adv.h @@ -3030,8 +3030,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/Zonestar/P802M/Configuration_adv.h b/config/examples/Zonestar/P802M/Configuration_adv.h index def44429dd..f681e0a5f5 100644 --- a/config/examples/Zonestar/P802M/Configuration_adv.h +++ b/config/examples/Zonestar/P802M/Configuration_adv.h @@ -3030,8 +3030,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h index 1783ddf13a..b91ec9001f 100644 --- a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h @@ -3033,8 +3033,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h index 0aa4075f97..8ab89e1006 100644 --- a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h @@ -3032,8 +3032,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h index b01b9b0e4d..361e2d6625 100644 --- a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h +++ b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h @@ -3031,8 +3031,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h index a7eb3b2475..8f5e366147 100644 --- a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h +++ b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h @@ -3032,8 +3032,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h b/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h index a099b6d6b6..bae3149ac5 100644 --- a/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h +++ b/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h @@ -3032,8 +3032,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h index 1a072e352c..bba07d43f0 100644 --- a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h +++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h @@ -3032,8 +3032,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/delta/FLSUN/kossel/Configuration_adv.h b/config/examples/delta/FLSUN/kossel/Configuration_adv.h index 28e484892a..aa58f2a297 100644 --- a/config/examples/delta/FLSUN/kossel/Configuration_adv.h +++ b/config/examples/delta/FLSUN/kossel/Configuration_adv.h @@ -3032,8 +3032,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h index f2110c2714..24c5b572cc 100644 --- a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h +++ b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h @@ -3032,8 +3032,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/delta/Geeetech/G2/Configuration_adv.h b/config/examples/delta/Geeetech/G2/Configuration_adv.h index 27eff552b8..88030bcf7a 100644 --- a/config/examples/delta/Geeetech/G2/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2/Configuration_adv.h @@ -3032,8 +3032,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h b/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h index 6f636bb304..2e997af5ec 100644 --- a/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h @@ -3032,8 +3032,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/delta/Geeetech/G2S/Configuration_adv.h b/config/examples/delta/Geeetech/G2S/Configuration_adv.h index 1b7af7d001..086034ec18 100644 --- a/config/examples/delta/Geeetech/G2S/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2S/Configuration_adv.h @@ -3032,8 +3032,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h b/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h index e30a66e62b..7a019c131b 100644 --- a/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h @@ -3032,8 +3032,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h index 79ea5c2f0d..9956ba3fa5 100644 --- a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h +++ b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h @@ -3032,8 +3032,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h b/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h index 91195803de..11ce369233 100644 --- a/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h +++ b/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h @@ -3032,8 +3032,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/delta/MKS/SBASE/Configuration_adv.h b/config/examples/delta/MKS/SBASE/Configuration_adv.h index 7dab5afae2..3ea696fa1b 100644 --- a/config/examples/delta/MKS/SBASE/Configuration_adv.h +++ b/config/examples/delta/MKS/SBASE/Configuration_adv.h @@ -3032,8 +3032,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/delta/Malyan M300/Configuration_adv.h b/config/examples/delta/Malyan M300/Configuration_adv.h index b90d2a205f..972a5b4be2 100644 --- a/config/examples/delta/Malyan M300/Configuration_adv.h +++ b/config/examples/delta/Malyan M300/Configuration_adv.h @@ -3032,8 +3032,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/delta/Tevo Little Monster/Configuration_adv.h b/config/examples/delta/Tevo Little Monster/Configuration_adv.h index 3d44e531ef..38b09b7bb1 100644 --- a/config/examples/delta/Tevo Little Monster/Configuration_adv.h +++ b/config/examples/delta/Tevo Little Monster/Configuration_adv.h @@ -3032,8 +3032,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/delta/generic/Configuration_adv.h b/config/examples/delta/generic/Configuration_adv.h index 547b9ad3b5..0f59693606 100644 --- a/config/examples/delta/generic/Configuration_adv.h +++ b/config/examples/delta/generic/Configuration_adv.h @@ -3032,8 +3032,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/delta/kossel_clear/Configuration_adv.h b/config/examples/delta/kossel_clear/Configuration_adv.h index 2379b4134a..b052775f45 100644 --- a/config/examples/delta/kossel_clear/Configuration_adv.h +++ b/config/examples/delta/kossel_clear/Configuration_adv.h @@ -3032,8 +3032,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/delta/kossel_mini/Configuration_adv.h b/config/examples/delta/kossel_mini/Configuration_adv.h index 55dbab76c8..f3535c00fb 100644 --- a/config/examples/delta/kossel_mini/Configuration_adv.h +++ b/config/examples/delta/kossel_mini/Configuration_adv.h @@ -3032,8 +3032,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/delta/kossel_xl/Configuration_adv.h b/config/examples/delta/kossel_xl/Configuration_adv.h index 96a911e89d..1a0b0faf45 100644 --- a/config/examples/delta/kossel_xl/Configuration_adv.h +++ b/config/examples/delta/kossel_xl/Configuration_adv.h @@ -3032,8 +3032,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/config/examples/gCreate/gMax1.5+/Configuration_adv.h index 4d628a13b8..66c876d6c5 100644 --- a/config/examples/gCreate/gMax1.5+/Configuration_adv.h +++ b/config/examples/gCreate/gMax1.5+/Configuration_adv.h @@ -3030,8 +3030,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/makibox/Configuration_adv.h b/config/examples/makibox/Configuration_adv.h index f2915865fa..1cda6c53b3 100644 --- a/config/examples/makibox/Configuration_adv.h +++ b/config/examples/makibox/Configuration_adv.h @@ -3030,8 +3030,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif diff --git a/config/examples/tvrrug/Round2/Configuration_adv.h b/config/examples/tvrrug/Round2/Configuration_adv.h index 16b2f5f4d0..a292c56161 100644 --- a/config/examples/tvrrug/Round2/Configuration_adv.h +++ b/config/examples/tvrrug/Round2/Configuration_adv.h @@ -3030,8 +3030,8 @@ //#define POWER_MONITOR_CURRENT // Monitor the system current //#define POWER_MONITOR_VOLTAGE // Monitor the system voltage #if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) - #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output - #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output + #define POWER_MONITOR_VOLTS_PER_AMP 0.05000 // Input voltage to the MCU analog pin per amp - DO NOT apply more than ADC_VREF! + #define POWER_MONITOR_CURRENT_OFFSET -1 // Offset value for current sensors with linear function output #define POWER_MONITOR_VOLTS_PER_VOLT 0.11786 // Input voltage to the MCU analog pin per volt - DO NOT apply more than ADC_VREF! #define POWER_MONITOR_FIXED_VOLTAGE 13.6 // Voltage for a current sensor with no voltage sensor (for power display) #endif