✨ Add DELTA_MAX_RADIUS

MarlinFirmware/Marlin#22795

config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h

@@ -827,6 +827,8 @@
   #if ENABLED(ANYCUBIC_KOSSEL_PLUS)
     // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers).
     #define DELTA_PRINTABLE_RADIUS 120.0  // (mm)
+    // Maximum reachable area
+    #define DELTA_MAX_RADIUS       120.0  // (mm)
     // Center-to-center distance of the holes in the diagonal push rods.
     #define DELTA_DIAGONAL_ROD 267        // (mm)
       // Horizontal offset from middle of printer to smooth rod center.
@@ -840,6 +842,8 @@
   #else
     // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers).
     #define DELTA_PRINTABLE_RADIUS 90.0   // (mm)
+    // Maximum reachable area
+    #define DELTA_MAX_RADIUS       90.0   // (mm)
     // Center-to-center distance of the holes in the diagonal push rods.
     #define DELTA_DIAGONAL_ROD 218.0      // (mm)
     // Horizontal distance bridged by diagonal push rods when effector is centered.

config/examples/delta/Anycubic/Kossel/Configuration.h

@@ -828,6 +828,8 @@
   #if ENABLED(ANYCUBIC_KOSSEL_PLUS)
     // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers).
     #define DELTA_PRINTABLE_RADIUS 116.0  // (mm)
+    // Maximum reachable area
+    #define DELTA_MAX_RADIUS       116.0  // (mm)
     // Center-to-center distance of the holes in the diagonal push rods.
     #define DELTA_DIAGONAL_ROD 267        // (mm)
       // Horizontal offset from middle of printer to smooth rod center.
@@ -841,6 +843,8 @@
   #else
     // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers).
     #define DELTA_PRINTABLE_RADIUS 90.0   // (mm)
+    // Maximum reachable area
+    #define DELTA_MAX_RADIUS       90.0   // (mm)
     // Center-to-center distance of the holes in the diagonal push rods.
     #define DELTA_DIAGONAL_ROD 218.0      // (mm)
     // Horizontal distance bridged by diagonal push rods when effector is centered.

config/examples/delta/Anycubic/Predator/Configuration.h

@@ -798,6 +798,9 @@
   // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers).
   #define DELTA_PRINTABLE_RADIUS 185.0    // (mm)
 
+  // Maximum reachable area
+  #define DELTA_MAX_RADIUS       185.0    // (mm)
+
   // Center-to-center distance of the holes in the diagonal push rods.
   #define DELTA_DIAGONAL_ROD 440.0        // (mm)
 

config/examples/delta/Dreammaker/Overlord/Configuration.h

@@ -796,6 +796,9 @@
   // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers).
   #define DELTA_PRINTABLE_RADIUS 75.0     // (mm) Overlord
 
+  // Maximum reachable area
+  #define DELTA_MAX_RADIUS       75.0     // (mm)
+
   // Center-to-center distance of the holes in the diagonal push rods.
   #define DELTA_DIAGONAL_ROD 206.0        // (mm) Overlord
 

config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h

@@ -808,13 +808,16 @@
   // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers).
   #define DELTA_PRINTABLE_RADIUS 85.0     // (mm) Overlord Pro
 
+  // Maximum reachable area
+  #define DELTA_MAX_RADIUS       85.0     // (mm)
+
   // Center-to-center distance of the holes in the diagonal push rods.
   #define DELTA_DIAGONAL_ROD 206.0        // (mm) Overlord Pro
 
   // Distance between bed and nozzle Z home position
   #define DELTA_HEIGHT 286.14             // (mm) Overlord Pro - Update this value using G33 auto calibrate
 
-  #define DELTA_ENDSTOP_ADJ { -0.33, 0.0, -0.85 }                 // Update these values using G33 auto calibrate
+  #define DELTA_ENDSTOP_ADJ { -0.33, 0.0  // Update these values using G33 auto calibrate
 
   // Horizontal distance bridged by diagonal push rods when effector is centered.
   #define DELTA_RADIUS 100.63             // (mm) Overlord Pro - Update this value using G33 auto calibrate

config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h

@@ -797,6 +797,9 @@
   // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers).
   #define DELTA_PRINTABLE_RADIUS 100.0    // (mm)
 
+  // Maximum reachable area
+  #define DELTA_MAX_RADIUS       100.0    // (mm)
+
   // Center-to-center distance of the holes in the diagonal push rods.
   #define DELTA_DIAGONAL_ROD 215.0        // (mm)
 

config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h

@@ -796,6 +796,9 @@
   // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers).
   #define DELTA_PRINTABLE_RADIUS 100.0    // (mm)
 
+  // Maximum reachable area
+  #define DELTA_MAX_RADIUS       100.0    // (mm)
+
   // Center-to-center distance of the holes in the diagonal push rods.
   #define DELTA_DIAGONAL_ROD 215.0        // (mm)
 

config/examples/delta/FLSUN/QQ-S/Configuration.h

@@ -797,6 +797,9 @@
   // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers).
   #define DELTA_PRINTABLE_RADIUS 130.0    // (mm)
 
+  // Maximum reachable area
+  #define DELTA_MAX_RADIUS       130.0    // (mm)
+
   // Center-to-center distance of the holes in the diagonal push rods.
   #define DELTA_DIAGONAL_ROD 280.0        // (mm)
 

config/examples/delta/FLSUN/QQS-Pro/Configuration.h

@@ -797,6 +797,9 @@
   // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers).
   #define DELTA_PRINTABLE_RADIUS 130.0    // (mm)
 
+  // Maximum reachable area
+  #define DELTA_MAX_RADIUS       130.0    // (mm)
+
   // Center-to-center distance of the holes in the diagonal push rods.
   #define DELTA_DIAGONAL_ROD 280.00       // (mm)
 

config/examples/delta/FLSUN/auto_calibrate/Configuration.h

@@ -797,6 +797,9 @@
   // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers).
   #define DELTA_PRINTABLE_RADIUS 85.0     // (mm)
 
+  // Maximum reachable area
+  #define DELTA_MAX_RADIUS       85.0     // (mm)
+
   // Center-to-center distance of the holes in the diagonal push rods.
   #define DELTA_DIAGONAL_ROD 218.0        // (mm)
 

config/examples/delta/FLSUN/kossel/Configuration.h

@@ -797,6 +797,9 @@
   // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers).
   #define DELTA_PRINTABLE_RADIUS 70.0     // (mm)
 
+  // Maximum reachable area
+  #define DELTA_MAX_RADIUS       70.0     // (mm)
+
   // Center-to-center distance of the holes in the diagonal push rods.
   #define DELTA_DIAGONAL_ROD 218.0        // (mm)
 

config/examples/delta/FLSUN/kossel_mini/Configuration.h

@@ -797,6 +797,9 @@
   // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers).
   #define DELTA_PRINTABLE_RADIUS 85.0     // (mm)
 
+  // Maximum reachable area
+  #define DELTA_MAX_RADIUS       85.0     // (mm)
+
   // Center-to-center distance of the holes in the diagonal push rods.
   #define DELTA_DIAGONAL_ROD 218.0        // (mm)
 

config/examples/delta/Geeetech/G2/Configuration.h

@@ -795,6 +795,9 @@
   // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers).
   #define DELTA_PRINTABLE_RADIUS 90.0     // (mm)
 
+  // Maximum reachable area
+  #define DELTA_MAX_RADIUS       90.0     // (mm)
+
   // Center-to-center distance of the holes in the diagonal push rods.
   #define DELTA_DIAGONAL_ROD 196.0        // (mm)
 

config/examples/delta/Geeetech/G2Pro/Configuration.h

@@ -795,6 +795,9 @@
   // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers).
   #define DELTA_PRINTABLE_RADIUS 90.0     // (mm)
 
+  // Maximum reachable area
+  #define DELTA_MAX_RADIUS       90.0     // (mm)
+
   // Center-to-center distance of the holes in the diagonal push rods.
   #define DELTA_DIAGONAL_ROD 196.0        // (mm)
 

config/examples/delta/Geeetech/G2S/Configuration.h

@@ -795,6 +795,9 @@
   // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers).
   #define DELTA_PRINTABLE_RADIUS 90.0     // (mm)
 
+  // Maximum reachable area
+  #define DELTA_MAX_RADIUS       90.0     // (mm)
+
   // Center-to-center distance of the holes in the diagonal push rods.
   #define DELTA_DIAGONAL_ROD 196.0        // (mm)
 

config/examples/delta/Geeetech/G2SPro/Configuration.h

@@ -795,6 +795,9 @@
   // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers).
   #define DELTA_PRINTABLE_RADIUS 90.0     // (mm)
 
+  // Maximum reachable area
+  #define DELTA_MAX_RADIUS       90.0     // (mm)
+
   // Center-to-center distance of the holes in the diagonal push rods.
   #define DELTA_DIAGONAL_ROD 196.0        // (mm)
 

config/examples/delta/Geeetech/Rostock 301/Configuration.h

@@ -797,6 +797,9 @@
   // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers).
   #define DELTA_PRINTABLE_RADIUS 90.0     // (mm)
 
+  // Maximum reachable area
+  #define DELTA_MAX_RADIUS       90.0     // (mm)
+
   // Center-to-center distance of the holes in the diagonal push rods.
   #define DELTA_DIAGONAL_ROD 196.0        // (mm)
 

config/examples/delta/Hatchbox_Alpha/Configuration.h

@@ -802,6 +802,9 @@
   // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers).
   #define DELTA_PRINTABLE_RADIUS 151.0    // (mm)
 
+  // Maximum reachable area
+  #define DELTA_MAX_RADIUS       151.0    // (mm)
+
   // Center-to-center distance of the holes in the diagonal push rods.
   #define DELTA_DIAGONAL_ROD 356.5        // (mm)
 

config/examples/delta/MKS/SBASE/Configuration.h

@@ -797,6 +797,9 @@
   // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers).
   #define DELTA_PRINTABLE_RADIUS 140.0    // (mm)
 
+  // Maximum reachable area
+  #define DELTA_MAX_RADIUS       140.0    // (mm)
+
   // Center-to-center distance of the holes in the diagonal push rods.
   #define DELTA_DIAGONAL_ROD 250.0        // (mm)
 

config/examples/delta/Malyan M300/Configuration.h

@@ -798,6 +798,9 @@
   // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers).
   #define DELTA_PRINTABLE_RADIUS 60.0     // (mm)
 
+  // Maximum reachable area
+  #define DELTA_MAX_RADIUS       60.0     // (mm)
+
   // Center-to-center distance of the holes in the diagonal push rods.
   #define DELTA_DIAGONAL_ROD 120.8        // (mm)
 

config/examples/delta/Tevo Little Monster/Configuration.h

@@ -798,6 +798,9 @@
   // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers).
   #define DELTA_PRINTABLE_RADIUS 165.0    // (mm)
 
+  // Maximum reachable area
+  #define DELTA_MAX_RADIUS       165.0    // (mm)
+
   // Center-to-center distance of the holes in the diagonal push rods.
   #define DELTA_DIAGONAL_ROD 397.19       // (mm)
 

config/examples/delta/generic/Configuration.h

@@ -797,6 +797,9 @@
   // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers).
   #define DELTA_PRINTABLE_RADIUS 140.0    // (mm)
 
+  // Maximum reachable area
+  #define DELTA_MAX_RADIUS       140.0    // (mm)
+
   // Center-to-center distance of the holes in the diagonal push rods.
   #define DELTA_DIAGONAL_ROD 250.0        // (mm)
 

config/examples/delta/kossel_clear/Configuration.h

@@ -795,6 +795,9 @@
   // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers).
   #define DELTA_PRINTABLE_RADIUS 100      // (mm)
 
+  // Maximum reachable area
+  #define DELTA_MAX_RADIUS       100      // (mm)
+
   // Center-to-center distance of the holes in the diagonal push rods.
   #define DELTA_DIAGONAL_ROD 290.5        // (mm) Kossel Clear OG Settings
 

config/examples/delta/kossel_mini/Configuration.h

@@ -797,6 +797,9 @@
   // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers).
   #define DELTA_PRINTABLE_RADIUS 90.0     // (mm)
 
+  // Maximum reachable area
+  #define DELTA_MAX_RADIUS       90.0     // (mm)
+
   // Center-to-center distance of the holes in the diagonal push rods.
   #define DELTA_DIAGONAL_ROD 215.0        // (mm)
 

config/examples/delta/kossel_pro/Configuration.h

@@ -802,6 +802,9 @@
   // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers).
   #define DELTA_PRINTABLE_RADIUS 127.0    // (mm)
 
+  // Maximum reachable area
+  #define DELTA_MAX_RADIUS       127.0    // (mm)
+
   // Center-to-center distance of the holes in the diagonal push rods.
   #define DELTA_DIAGONAL_ROD 301.0        // (mm)
 

config/examples/delta/kossel_xl/Configuration.h

@@ -803,6 +803,9 @@
   // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers).
   #define DELTA_PRINTABLE_RADIUS 140.0    // (mm)
 
+  // Maximum reachable area
+  #define DELTA_MAX_RADIUS       140.0    // (mm)
+
   // Center-to-center distance of the holes in the diagonal push rods.
   #define DELTA_DIAGONAL_ROD 319.5        // (mm)