3D-printing/Configurations
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Configurations.git synced 2025-12-11 16:00:54 -07:00
Code Issues Projects Releases Packages Wiki Activity Actions

bring up to date

Browse source
This commit is contained in:
Scott Lahteine 2025-11-13 20:24:51 -06:00
parent c3f27f6245
commit 77f3bd2759
3 changed files with 67 additions and 67 deletions
Download patch file Download diff file Expand all files Collapse all files

50
config/examples/Creality/Ender-5 Plus/Creality 4.2.2 GD32 (RELOADED UI)/Configuration.h
View file

@ -20,8 +20,8 @@
*
*/
#pragma once
#define CONFIG_EXAMPLES_DIR "Creality/Ender-5 Plus/CrealityV1 (RELOADED UI)"
#error "Don't build with import-2.1.x configurations!"
#error "Use the 'bugfix...' or 'release...' configurations matching your Marlin version."
/**
* Configuration.h
@ -967,7 +967,7 @@
#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders
#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed
//#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling
//===========================================================================
@ -1069,7 +1069,8 @@
// Delta radius and diagonal rod adjustments
//#define DELTA_RADIUS_TRIM_TOWER { 0.0, 0.0, 0.0 } // (mm)
//#define DELTA_DIAGONAL_ROD_TRIM_TOWER { 0.0, 0.0, 0.0 } // (mm)
#endif
#endif // DELTA
// @section scara
@ -1125,17 +1126,37 @@
#define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm)
// TPARA tower offset (position of Tower relative to bed zero position)
// Height of the Shoulder axis (pivot) relative to the tower floor
#define TPARA_SHOULDER_AXIS_HEIGHT 135.0 // (mm)
// The position of the last linkage relative to the robot arm origin
// (intersection of the base axis and floor) when at the home position
#define TPARA_ARM_X_HOME_POS 28.75 // (mm) Measured from shoulder axis to tool holder axis in home position
#define TPARA_ARM_Y_HOME_POS 0 // (mm)
#define TPARA_ARM_Z_HOME_POS 250.00 // (mm) Measured from tool holder axis to the floor
// TPARA Workspace offset relative to the tower (position of workspace origin relative to robot Tower origin )
// This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm)
#define TPARA_OFFSET_X 127.0 // (mm) to coincide with minimum radius MIDDLE_DEAD_ZONE_R, and W(0,0,0) is reachable
#define TPARA_OFFSET_Y 0.0 // (mm)
#define TPARA_OFFSET_Z 0.0 // (mm)
// TPARA tool connection point offset, relative to the tool moving frame origin which is in the last linkage axis,
// (TCP: tool center/connection point) of the robot,
// the plane of measured offset must be alligned with home position plane
#define TPARA_TCP_OFFSET_X 27.0 // (mm) Tool flange: 27 (distance from pivot to bolt holes), extruder tool: 50.0,
#define TPARA_TCP_OFFSET_Y 0.0 // (mm)
#define TPARA_TCP_OFFSET_Z -65.0 // (mm) Tool flange (bottom): -6 (caution as Z 0 posiion will crash second linkage to the floor, -35 is safe for testing with no tool), extruder tool (depends on extruder): -65.0
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
// Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm)
#endif
// For now use a hardcoded uniform limit, although it should be calculated, or fix a limit for each axis angle
#define MIDDLE_DEAD_ZONE_R 100 // (mm)
// Max angle between L1 and L2
#define TPARA_MAX_L1L2_ANGLE 140.0f // (degrees)
#endif // AXEL_TPARA
// @section polar
@ -1413,6 +1434,11 @@
* See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
*/
//#define S_CURVE_ACCELERATION
#if ENABLED(S_CURVE_ACCELERATION)
// Define to use 4th instead of 6th order motion curve
//#define S_CURVE_FACTOR 0.25 // Initial and final acceleration factor, ideally 0.1 to 0.4.
// Shouldn't generally require tuning.
#endif
//===========================================================================
//============================= Z Probe Options =============================
@ -1686,6 +1712,8 @@
//#define PROBE_TOOLCHANGE_NO_MOVE // Suppress motion on probe tool-change
#endif
//#define PROBE_WAKEUP_TIME_MS 30 // (ms) Time for the probe to wake up
// Most probes should stay away from the edges of the bed, but
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
#define PROBING_MARGIN 5
@ -2771,7 +2799,7 @@
*
* :['JAPANESE', 'WESTERN', 'CYRILLIC']
*/
#define DISPLAY_CHARSET_HD44780 WESTERN
#define DISPLAY_CHARSET_HD44780 JAPANESE
/**
* Info Screen Style (0:Classic, 1:Průša, 2:CNC)

84
config/examples/Creality/Ender-5 Plus/Creality 4.2.2 GD32 (RELOADED UI)/Configuration_adv.h
View file

@ -21,8 +21,6 @@
*/
#pragma once
#define CONFIG_EXAMPLES_DIR "Creality/Ender-5 Plus/CrealityV1 (RELOADED UI)"
/**
* Configuration_adv.h
*
@ -1156,9 +1154,6 @@
#define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
#define FTM_LINEAR_ADV_DEFAULT_ENA false // Default linear advance enable (true) or disable (false)
#define FTM_LINEAR_ADV_DEFAULT_K 0.0f // Default linear advance gain. (Acceleration-based scaling factor.)
#define FTM_DEFAULT_SHAPER_X ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
#define FTM_SHAPING_DEFAULT_FREQ_X 37.0f // (Hz) Default peak frequency used by input shapers
#define FTM_SHAPING_ZETA_X 0.1f // Zeta used by input shapers for X axis
@ -1182,6 +1177,8 @@
#define FTM_SHAPING_ZETA_E 0.03f // Zeta used by input shapers for E axis
#define FTM_SHAPING_V_TOL_E 0.05f // Vibration tolerance used by EI input shapers for E axis
//#define FTM_RESONANCE_TEST // Sine sweep motion for resonance study
//#define FTM_SMOOTHING // Smoothing can reduce artifacts and make steppers quieter
// on sharp corners, but too much will round corners.
#if ENABLED(FTM_SMOOTHING)
@ -1196,7 +1193,7 @@
#define FTM_TRAJECTORY_TYPE TRAPEZOIDAL // Block acceleration profile (TRAPEZOIDAL, POLY5, POLY6)
// TRAPEZOIDAL: Continuous Velocity. Max acceleration is respected.
// POLY5: Like POLY6 with 1.5x but cpu cheaper.
// POLY5: Like POLY6 with 1.5x but uses less CPU.
// POLY6: Continuous Acceleration (aka S_CURVE).
// POLY trajectories not only reduce resonances without rounding corners, but also
// reduce extruder strain due to linear advance.
@ -1206,30 +1203,12 @@
/**
* Advanced configuration
*/
#define FTM_UNIFIED_BWS // DON'T DISABLE unless you use Ulendo FBS (not implemented)
#if ENABLED(FTM_UNIFIED_BWS)
#define FTM_BW_SIZE 100 // Unified Window and Batch size with a ratio of 2
#else
#define FTM_WINDOW_SIZE 200 // Custom Window size for trajectory generation needed by Ulendo FBS
#define FTM_BATCH_SIZE 100 // Custom Batch size for trajectory generation needed by Ulendo FBS
#endif
#define FTM_BUFFER_SIZE 128 // Window size for trajectory generation, must be a power of 2 (e.g 64, 128, 256, ...)
// The total buffered time in seconds is (FTM_BUFFER_SIZE/FTM_FS)
#define FTM_FS 1000 // (Hz) Frequency for trajectory generation.
#define FTM_STEPPER_FS 2'000'000 // (Hz) Time resolution of stepper I/O update. Shouldn't affect CPU much (slower board testing needed)
#define FTM_MIN_SHAPE_FREQ 20 // (Hz) Minimum shaping frequency, lower consumes more RAM
#define FTM_FS 1000 // (Hz) Frequency for trajectory generation
#if DISABLED(COREXY)
#define FTM_STEPPER_FS 20000 // (Hz) Frequency for stepper I/O update
// Use this to adjust the time required to consume the command buffer.
// Try increasing this value if stepper motion is choppy.
#define FTM_STEPPERCMD_BUFF_SIZE 3000 // Size of the stepper command buffers
#else
// CoreXY motion needs a larger buffer size. These values are based on our testing.
#define FTM_STEPPER_FS 30000
#define FTM_STEPPERCMD_BUFF_SIZE 6000
#endif
#define FTM_MIN_SHAPE_FREQ 10 // (Hz) Minimum shaping frequency, lower consumes more RAM
#endif // FT_MOTION
/**
@ -1649,7 +1628,7 @@
#if HAS_MARLINUI_U8GLIB
//#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~3260 (or ~940) bytes of flash.
#endif
#if ANY(HAS_MARLINUI_U8GLIB, TOUCH_UI_FTDI_EVE, HAS_MARLINUI_HD44780)
#if ANY(HAS_MARLINUI_U8GLIB, TOUCH_UI_FTDI_EVE, HAS_MARLINUI_HD44780, HAS_GRAPHICAL_TFT)
//#define SHOW_CUSTOM_BOOTSCREEN // Show the bitmap in Marlin/_Bootscreen.h on startup.
#endif
#endif
@ -1731,7 +1710,7 @@
#define SET_PROGRESS_PERCENT // Add 'P' parameter to set percentage done
#define SET_REMAINING_TIME // Add 'R' parameter to set remaining time
//#define SET_INTERACTION_TIME // Add 'C' parameter to set time until next filament change or other user interaction
#define M73_REPORT // Report M73 values to host
#define M73_REPORT // Report M73 values to host
#if ALL(M73_REPORT, HAS_MEDIA)
#define M73_REPORT_SD_ONLY // Report only when printing from SD
#endif
@ -1741,7 +1720,7 @@
#if HAS_DISPLAY && ANY(HAS_MEDIA, SET_PROGRESS_MANUALLY)
#define SHOW_PROGRESS_PERCENT // Show print progress percentage (doesn't affect progress bar)
#define SHOW_ELAPSED_TIME // Display elapsed printing time (prefix 'E')
#define SHOW_REMAINING_TIME // Display estimated time to completion (prefix 'R')
#define SHOW_REMAINING_TIME // Display estimated time to completion (prefix 'R')
#if ENABLED(SET_INTERACTION_TIME)
#define SHOW_INTERACTION_TIME // Display time until next user interaction ('C' = filament change)
#endif
@ -1783,7 +1762,7 @@
#define SD_PROCEDURE_DEPTH 1 // Increase if you need more nested M32 calls
#define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished
#define SD_FINISHED_RELEASECOMMAND "M84XYE" // Use "M84XYE" to keep Z enabled so your bed stays in place
#define SD_FINISHED_RELEASECOMMAND "M84XYE" // Use "M84XYE" to keep Z enabled so your bed stays in place
// Reverse SD sort to show "more recent" files first, according to the card's FAT.
// Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
@ -2395,13 +2374,17 @@
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#if ANY(LIN_ADVANCE, FT_MOTION)
#if ENABLED(DISTINCT_E_FACTORS)
#define ADVANCE_K { 0.6 } // (mm) Compression length per 1mm/s extruder speed, per extruder
#define ADVANCE_K { 0.6 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
#else
#define ADVANCE_K 0.6 // (mm) Compression length applying to all extruders
#define ADVANCE_K 0.6 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
#endif
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
#endif
#if ENABLED(LIN_ADVANCE)
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
@ -2867,6 +2850,8 @@
#endif
#endif
// @section tool change
/**
* Universal tool change settings.
* Applies to all types of extruders except where explicitly noted.
@ -3962,14 +3947,6 @@
*/
//#define CNC_COORDINATE_SYSTEMS
/**
* CNC Drilling Cycle - UNDER DEVELOPMENT
*
* Enables G81 to perform a drilling cycle.
* Currently only supports a single cycle, no G-code chaining.
*/
//#define CNC_DRILLING_CYCLE
// @section security
/**
@ -4066,15 +4043,6 @@
//#define GCODE_QUOTED_STRINGS // Support for quoted string parameters
#endif
/**
* Variables
*
* Define a variable from 100-115 with G-code like '#101=19.6'.
* A variable can then be used in a G-code expression like 'G0 X[#101+3]'.
* See https://gcodetutor.com/cnc-macro-programming/cnc-variables.html
*/
//#define GCODE_VARIABLES
/**
* Support for MeatPack G-code compression (https://github.com/scottmudge/OctoPrint-MeatPack)
*/
@ -4128,13 +4096,17 @@
/**
* G-code Macros
*
* Add G-codes M810-M819 to define and run G-code macros.
* Macros are not saved to EEPROM.
* Add G-codes M810-M819 to define and run G-code macros
* and M820 to report the current set of macros.
* Macros are not saved to EEPROM unless enabled below.
*/
//#define GCODE_MACROS
#if ENABLED(GCODE_MACROS)
#define GCODE_MACROS_SLOTS 5 // Up to 10 may be used
#define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro
#if ENABLED(EEPROM_SETTINGS)
//#define GCODE_MACROS_IN_EEPROM // Include macros in EEPROM
#endif
#endif
/**

0
config/examples/Creality/Ender-5 Plus/Creality 4.2.2 GD32 (RELOADED UI)/Readme.md → config/examples/Creality/Ender-5 Plus/Creality 4.2.2 GD32 (RELOADED UI)/README_.md
View file