diff --git a/config/default/Configuration.h b/config/default/Configuration.h index 8d55696fe2..10ef60491c 100644 --- a/config/default/Configuration.h +++ b/config/default/Configuration.h @@ -1497,6 +1497,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/3DFabXYZ/Migbot/Configuration.h b/config/examples/3DFabXYZ/Migbot/Configuration.h index c367cd5f5c..97f65d8ac4 100644 --- a/config/examples/3DFabXYZ/Migbot/Configuration.h +++ b/config/examples/3DFabXYZ/Migbot/Configuration.h @@ -1499,6 +1499,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/ADIMLab/Gantry v1/Configuration.h b/config/examples/ADIMLab/Gantry v1/Configuration.h index 4bbe8b12f4..bcddf65d09 100644 --- a/config/examples/ADIMLab/Gantry v1/Configuration.h +++ b/config/examples/ADIMLab/Gantry v1/Configuration.h @@ -1498,6 +1498,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/ADIMLab/Gantry v2/Configuration.h b/config/examples/ADIMLab/Gantry v2/Configuration.h index 1145b4fb07..04b268fed3 100644 --- a/config/examples/ADIMLab/Gantry v2/Configuration.h +++ b/config/examples/ADIMLab/Gantry v2/Configuration.h @@ -1498,6 +1498,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/AlephObjects/TAZ4/Configuration.h b/config/examples/AlephObjects/TAZ4/Configuration.h index 44b9434b1a..f00b7ebab7 100644 --- a/config/examples/AlephObjects/TAZ4/Configuration.h +++ b/config/examples/AlephObjects/TAZ4/Configuration.h @@ -1508,6 +1508,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Alfawise/U20-bltouch/Configuration.h b/config/examples/Alfawise/U20-bltouch/Configuration.h index c3c0e08bf3..9dbc567d97 100644 --- a/config/examples/Alfawise/U20-bltouch/Configuration.h +++ b/config/examples/Alfawise/U20-bltouch/Configuration.h @@ -1567,6 +1567,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Alfawise/U20/Configuration.h b/config/examples/Alfawise/U20/Configuration.h index 152637b824..d0d851ed7d 100644 --- a/config/examples/Alfawise/U20/Configuration.h +++ b/config/examples/Alfawise/U20/Configuration.h @@ -1569,6 +1569,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/AliExpress/CL-260/Configuration.h b/config/examples/AliExpress/CL-260/Configuration.h index c104091740..2765eca633 100644 --- a/config/examples/AliExpress/CL-260/Configuration.h +++ b/config/examples/AliExpress/CL-260/Configuration.h @@ -1497,6 +1497,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/AliExpress/UM2pExt/Configuration.h b/config/examples/AliExpress/UM2pExt/Configuration.h index 0bc022abc4..cb12a28228 100644 --- a/config/examples/AliExpress/UM2pExt/Configuration.h +++ b/config/examples/AliExpress/UM2pExt/Configuration.h @@ -1498,6 +1498,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Anet/A2/Configuration.h b/config/examples/Anet/A2/Configuration.h index f32195ce5a..259ec0b249 100644 --- a/config/examples/Anet/A2/Configuration.h +++ b/config/examples/Anet/A2/Configuration.h @@ -1497,6 +1497,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Anet/A2plus/Configuration.h b/config/examples/Anet/A2plus/Configuration.h index 82d89943dc..3c3a1ed594 100644 --- a/config/examples/Anet/A2plus/Configuration.h +++ b/config/examples/Anet/A2plus/Configuration.h @@ -1497,6 +1497,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Anet/A6/Configuration.h b/config/examples/Anet/A6/Configuration.h index a5c9e40e80..5d96dbc652 100644 --- a/config/examples/Anet/A6/Configuration.h +++ b/config/examples/Anet/A6/Configuration.h @@ -1571,6 +1571,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Anet/A8/Configuration.h b/config/examples/Anet/A8/Configuration.h index 50985b35d5..5ca026e729 100644 --- a/config/examples/Anet/A8/Configuration.h +++ b/config/examples/Anet/A8/Configuration.h @@ -1500,6 +1500,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Anet/A8plus/Configuration.h b/config/examples/Anet/A8plus/Configuration.h index a222e0e870..795d0c7e19 100644 --- a/config/examples/Anet/A8plus/Configuration.h +++ b/config/examples/Anet/A8plus/Configuration.h @@ -1499,6 +1499,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Anet/A9/Configuration.h b/config/examples/Anet/A9/Configuration.h index 8501990f32..2b23957702 100644 --- a/config/examples/Anet/A9/Configuration.h +++ b/config/examples/Anet/A9/Configuration.h @@ -1497,6 +1497,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Anet/E10/Configuration.h b/config/examples/Anet/E10/Configuration.h index e8c3a48c23..f6d28a92eb 100644 --- a/config/examples/Anet/E10/Configuration.h +++ b/config/examples/Anet/E10/Configuration.h @@ -1497,6 +1497,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h b/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h index 490d6d10c1..2bc59423b3 100644 --- a/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h +++ b/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h @@ -1499,6 +1499,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Anet/E16/Stock/Configuration.h b/config/examples/Anet/E16/Stock/Configuration.h index aeece6673c..f975c28819 100644 --- a/config/examples/Anet/E16/Stock/Configuration.h +++ b/config/examples/Anet/E16/Stock/Configuration.h @@ -1499,6 +1499,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Anet/ET4+/Configuration.h b/config/examples/Anet/ET4+/Configuration.h index 251978b426..7e678e8699 100644 --- a/config/examples/Anet/ET4+/Configuration.h +++ b/config/examples/Anet/ET4+/Configuration.h @@ -1503,6 +1503,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Anet/ET4-Pro/Configuration.h b/config/examples/Anet/ET4-Pro/Configuration.h index 2eecec709d..90efaecf9a 100644 --- a/config/examples/Anet/ET4-Pro/Configuration.h +++ b/config/examples/Anet/ET4-Pro/Configuration.h @@ -1503,6 +1503,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Anet/ET4/Configuration.h b/config/examples/Anet/ET4/Configuration.h index f02631dbcb..0a022655ee 100644 --- a/config/examples/Anet/ET4/Configuration.h +++ b/config/examples/Anet/ET4/Configuration.h @@ -1503,6 +1503,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Anet/ET4X/Configuration.h b/config/examples/Anet/ET4X/Configuration.h index 995e49a043..3313f60f5b 100644 --- a/config/examples/Anet/ET4X/Configuration.h +++ b/config/examples/Anet/ET4X/Configuration.h @@ -1503,6 +1503,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Anet/ET5-Pro/Configuration.h b/config/examples/Anet/ET5-Pro/Configuration.h index 655f6538db..b7c61cfaaf 100644 --- a/config/examples/Anet/ET5-Pro/Configuration.h +++ b/config/examples/Anet/ET5-Pro/Configuration.h @@ -1491,6 +1491,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Anet/ET5/Configuration.h b/config/examples/Anet/ET5/Configuration.h index 5d54e0b58a..9116e3513c 100644 --- a/config/examples/Anet/ET5/Configuration.h +++ b/config/examples/Anet/ET5/Configuration.h @@ -1491,6 +1491,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Anet/ET5X/Configuration.h b/config/examples/Anet/ET5X/Configuration.h index 8720d9421e..9815e5452f 100644 --- a/config/examples/Anet/ET5X/Configuration.h +++ b/config/examples/Anet/ET5X/Configuration.h @@ -1491,6 +1491,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/AnyCubic/Chiron/Configuration.h b/config/examples/AnyCubic/Chiron/Configuration.h index 54170a9e37..4ecfe53b0e 100644 --- a/config/examples/AnyCubic/Chiron/Configuration.h +++ b/config/examples/AnyCubic/Chiron/Configuration.h @@ -1500,6 +1500,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h index 4b0b140250..9527a1333f 100644 --- a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h +++ b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h @@ -1499,6 +1499,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h index 7916686460..1f327f6230 100644 --- a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h +++ b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h @@ -1499,6 +1499,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h index c9f1b5bfa4..81a28fff9f 100644 --- a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h +++ b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h @@ -1497,6 +1497,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/AnyCubic/i3 Mega/Configuration.h b/config/examples/AnyCubic/i3 Mega/Configuration.h index 58b8b4e3f5..7603ab19aa 100644 --- a/config/examples/AnyCubic/i3 Mega/Configuration.h +++ b/config/examples/AnyCubic/i3 Mega/Configuration.h @@ -1519,6 +1519,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/AnyCubic/i3/Configuration.h b/config/examples/AnyCubic/i3/Configuration.h index fa7bde6cf3..a078387bb2 100644 --- a/config/examples/AnyCubic/i3/Configuration.h +++ b/config/examples/AnyCubic/i3/Configuration.h @@ -1497,6 +1497,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/ArmEd/Configuration.h b/config/examples/ArmEd/Configuration.h index 5ad09671b0..73d024d785 100644 --- a/config/examples/ArmEd/Configuration.h +++ b/config/examples/ArmEd/Configuration.h @@ -1498,6 +1498,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Artillery/Genius/Configuration.h b/config/examples/Artillery/Genius/Configuration.h index 2c6d0f2cdf..bd84752e57 100644 --- a/config/examples/Artillery/Genius/Configuration.h +++ b/config/examples/Artillery/Genius/Configuration.h @@ -1497,6 +1497,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Artillery/Sidewinder X1/Configuration.h b/config/examples/Artillery/Sidewinder X1/Configuration.h index fbcf8c51bd..c71b6aa721 100644 --- a/config/examples/Artillery/Sidewinder X1/Configuration.h +++ b/config/examples/Artillery/Sidewinder X1/Configuration.h @@ -1497,6 +1497,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration.h b/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration.h index 9e7b4cbe9c..110e8291ed 100644 --- a/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration.h +++ b/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration.h @@ -1513,6 +1513,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Azteeg/X5GT/Configuration.h b/config/examples/Azteeg/X5GT/Configuration.h index ad4767f771..a13b42e1b8 100644 --- a/config/examples/Azteeg/X5GT/Configuration.h +++ b/config/examples/Azteeg/X5GT/Configuration.h @@ -1497,6 +1497,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration.h b/config/examples/BIBO/TouchX/cyclops/Configuration.h index dcd0951aa6..8c968b4894 100644 --- a/config/examples/BIBO/TouchX/cyclops/Configuration.h +++ b/config/examples/BIBO/TouchX/cyclops/Configuration.h @@ -1497,6 +1497,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/BIBO/TouchX/default/Configuration.h b/config/examples/BIBO/TouchX/default/Configuration.h index d1cc3b1a81..a952f1e950 100644 --- a/config/examples/BIBO/TouchX/default/Configuration.h +++ b/config/examples/BIBO/TouchX/default/Configuration.h @@ -1453,6 +1453,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/BIQU/B1-BLTouch/Configuration.h b/config/examples/BIQU/B1-BLTouch/Configuration.h index 6dc386276b..8f1c5b5662 100644 --- a/config/examples/BIQU/B1-BLTouch/Configuration.h +++ b/config/examples/BIQU/B1-BLTouch/Configuration.h @@ -1497,6 +1497,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/BIQU/B1/Configuration.h b/config/examples/BIQU/B1/Configuration.h index 7a8600755c..fc37961bab 100644 --- a/config/examples/BIQU/B1/Configuration.h +++ b/config/examples/BIQU/B1/Configuration.h @@ -1497,6 +1497,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/BQ/Hephestos/Configuration.h b/config/examples/BQ/Hephestos/Configuration.h index 866c70bc0f..8fba740cde 100644 --- a/config/examples/BQ/Hephestos/Configuration.h +++ b/config/examples/BQ/Hephestos/Configuration.h @@ -1498,6 +1498,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/BQ/Hephestos_2/Configuration.h b/config/examples/BQ/Hephestos_2/Configuration.h index 4c3e48a107..c4eb8c4e8e 100644 --- a/config/examples/BQ/Hephestos_2/Configuration.h +++ b/config/examples/BQ/Hephestos_2/Configuration.h @@ -1511,6 +1511,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/BQ/WITBOX/Configuration.h b/config/examples/BQ/WITBOX/Configuration.h index 38d65fa5ae..a84b03fe4d 100644 --- a/config/examples/BQ/WITBOX/Configuration.h +++ b/config/examples/BQ/WITBOX/Configuration.h @@ -1498,6 +1498,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h b/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h index dbcc5febde..b4b3110e6d 100644 --- a/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h +++ b/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h @@ -1498,6 +1498,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Cartesio/Configuration.h b/config/examples/Cartesio/Configuration.h index 5c2bccd80f..0a7e992127 100644 --- a/config/examples/Cartesio/Configuration.h +++ b/config/examples/Cartesio/Configuration.h @@ -1513,6 +1513,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Copymaster3D/300/Configuration.h b/config/examples/Copymaster3D/300/Configuration.h index 22cf5c4e75..4ff275f21d 100644 --- a/config/examples/Copymaster3D/300/Configuration.h +++ b/config/examples/Copymaster3D/300/Configuration.h @@ -1498,6 +1498,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Copymaster3D/400/Configuration.h b/config/examples/Copymaster3D/400/Configuration.h index f4051c37e0..c9394e7c24 100644 --- a/config/examples/Copymaster3D/400/Configuration.h +++ b/config/examples/Copymaster3D/400/Configuration.h @@ -1497,6 +1497,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Copymaster3D/500/Configuration.h b/config/examples/Copymaster3D/500/Configuration.h index 5aa64ce889..1f682bf32f 100644 --- a/config/examples/Copymaster3D/500/Configuration.h +++ b/config/examples/Copymaster3D/500/Configuration.h @@ -1498,6 +1498,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration.h index 2a38752dcc..4804b00f31 100644 --- a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -1506,6 +1506,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h index 474a8c5a46..cf66cc5fea 100644 --- a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h @@ -1506,6 +1506,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h index e1142588ee..b47483ac7a 100644 --- a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h +++ b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h @@ -1497,6 +1497,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h index 10962e35b7..0b63488057 100644 --- a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h @@ -1500,6 +1500,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h index f00d74ba04..ac1b0927e2 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h @@ -1500,6 +1500,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Creality/CR-10 V2/Configuration.h b/config/examples/Creality/CR-10 V2/Configuration.h index 768e2f8dc5..b7ae8a45ce 100644 --- a/config/examples/Creality/CR-10 V2/Configuration.h +++ b/config/examples/Creality/CR-10 V2/Configuration.h @@ -1521,6 +1521,8 @@ #define UBL_Z_RAISE_WHEN_OFF_MESH 0 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Creality/CR-10 V3/Configuration.h b/config/examples/Creality/CR-10 V3/Configuration.h index 15e85e88d2..a74e294168 100644 --- a/config/examples/Creality/CR-10 V3/Configuration.h +++ b/config/examples/Creality/CR-10 V3/Configuration.h @@ -1524,6 +1524,8 @@ #define UBL_Z_RAISE_WHEN_OFF_MESH 0 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h index b6de99b71e..c1186991a4 100644 --- a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -1496,6 +1496,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Creality/CR-10/CrealityV1/Configuration.h b/config/examples/Creality/CR-10/CrealityV1/Configuration.h index ba99cb10bd..f334958c43 100644 --- a/config/examples/Creality/CR-10/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10/CrealityV1/Configuration.h @@ -1497,6 +1497,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h index d43edc7c34..80468f9f4e 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h @@ -1497,6 +1497,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h index 0975d4823b..5fe9005117 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -1498,6 +1498,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration.h index 888a638501..75e16b7fff 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration.h @@ -1497,6 +1497,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Creality/CR-10S/CrealityV1/Configuration.h b/config/examples/Creality/CR-10S/CrealityV1/Configuration.h index 752d527f54..e1d124416f 100644 --- a/config/examples/Creality/CR-10S/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10S/CrealityV1/Configuration.h @@ -1498,6 +1498,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Creality/CR-20 Pro/Configuration.h b/config/examples/Creality/CR-20 Pro/Configuration.h index 1f5de2ea33..75c8665164 100644 --- a/config/examples/Creality/CR-20 Pro/Configuration.h +++ b/config/examples/Creality/CR-20 Pro/Configuration.h @@ -1500,6 +1500,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Creality/CR-20/Configuration.h b/config/examples/Creality/CR-20/Configuration.h index 3295ca4170..52f714c78d 100644 --- a/config/examples/Creality/CR-20/Configuration.h +++ b/config/examples/Creality/CR-20/Configuration.h @@ -1500,6 +1500,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Creality/CR-6 SE/Configuration.h b/config/examples/Creality/CR-6 SE/Configuration.h index 9f76571534..804bd8537f 100644 --- a/config/examples/Creality/CR-6 SE/Configuration.h +++ b/config/examples/Creality/CR-6 SE/Configuration.h @@ -1497,6 +1497,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Creality/CR-8/Configuration.h b/config/examples/Creality/CR-8/Configuration.h index 54bfd6c90a..8cc28abad0 100644 --- a/config/examples/Creality/CR-8/Configuration.h +++ b/config/examples/Creality/CR-8/Configuration.h @@ -1497,6 +1497,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Creality/Ender-2/Configuration.h b/config/examples/Creality/Ender-2/Configuration.h index c22ccecea6..58705d378b 100644 --- a/config/examples/Creality/Ender-2/Configuration.h +++ b/config/examples/Creality/Ender-2/Configuration.h @@ -1498,6 +1498,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Creality/Ender-3 Max/Configuration.h b/config/examples/Creality/Ender-3 Max/Configuration.h index 9c714db82d..dcc764ac1b 100644 --- a/config/examples/Creality/Ender-3 Max/Configuration.h +++ b/config/examples/Creality/Ender-3 Max/Configuration.h @@ -1520,6 +1520,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration.h index 54121b96bf..1c80d208d2 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration.h @@ -1497,6 +1497,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h index 9c6d5bf917..055c4c83a2 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h @@ -1497,6 +1497,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h index 788e9d68b5..8191e87762 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h @@ -1497,6 +1497,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h index 52e3cb16db..63c1251e0d 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -1497,6 +1497,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h index aad483abca..7e207213f4 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h @@ -1498,6 +1498,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h index 57ec13fadd..3c09e0c0af 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h @@ -1501,6 +1501,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h index ec472a042f..266232708e 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h @@ -1498,6 +1498,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Creality/Ender-3 V2/Configuration.h b/config/examples/Creality/Ender-3 V2/Configuration.h index 4bd184e320..5498a19b7d 100644 --- a/config/examples/Creality/Ender-3 V2/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/Configuration.h @@ -1497,6 +1497,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration.h index 073874e5d4..efa661e553 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration.h @@ -1496,6 +1496,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h index 2797946122..c452539fd4 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h @@ -1496,6 +1496,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h index 770c8bffec..6d57e434c1 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h @@ -1496,6 +1496,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h index a86d175bf4..b0fc3f50db 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h @@ -1496,6 +1496,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h index 77142262e9..266ac00377 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h @@ -1497,6 +1497,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h index 6cdbbdf124..121f2d6bc8 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h @@ -1496,6 +1496,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h index 90a0354d0e..83b34e0b3a 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h @@ -1496,6 +1496,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h index bc6df3c383..a23d96e2dd 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -1496,6 +1496,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Creality/Ender-3/CrealityV1/Configuration.h b/config/examples/Creality/Ender-3/CrealityV1/Configuration.h index 9599636b6c..1623f10b18 100644 --- a/config/examples/Creality/Ender-3/CrealityV1/Configuration.h +++ b/config/examples/Creality/Ender-3/CrealityV1/Configuration.h @@ -1498,6 +1498,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Creality/Ender-3/CrealityV422/Configuration.h b/config/examples/Creality/Ender-3/CrealityV422/Configuration.h index 8184d115dd..66b31e3c10 100644 --- a/config/examples/Creality/Ender-3/CrealityV422/Configuration.h +++ b/config/examples/Creality/Ender-3/CrealityV422/Configuration.h @@ -1468,6 +1468,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Creality/Ender-3/CrealityV427/Configuration.h b/config/examples/Creality/Ender-3/CrealityV427/Configuration.h index 50418f2b7b..3df70cc075 100644 --- a/config/examples/Creality/Ender-3/CrealityV427/Configuration.h +++ b/config/examples/Creality/Ender-3/CrealityV427/Configuration.h @@ -1504,6 +1504,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h index f5b02c7d67..02d21222c2 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h @@ -1498,6 +1498,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h index 40478595bb..9a55a04efd 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h @@ -1498,6 +1498,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h index 22fd1d01df..2c8371a122 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h @@ -1498,6 +1498,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h index 9a38d0a61b..b4607b4033 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h @@ -1498,6 +1498,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h index 2dfd70883c..f097a0438f 100644 --- a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h +++ b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h @@ -1503,6 +1503,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration.h b/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration.h index 060d8fff6b..3c1b1c1664 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration.h @@ -1496,6 +1496,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration.h b/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration.h index 2522ceaeed..2a78556f48 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration.h @@ -1496,6 +1496,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration.h b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration.h index b97f3d6f0f..0e8d935a02 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration.h @@ -1498,6 +1498,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Creality/Ender-4/Configuration.h b/config/examples/Creality/Ender-4/Configuration.h index e6227a337e..79452c4425 100644 --- a/config/examples/Creality/Ender-4/Configuration.h +++ b/config/examples/Creality/Ender-4/Configuration.h @@ -1497,6 +1497,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Creality/Ender-5 Plus/Configuration.h b/config/examples/Creality/Ender-5 Plus/Configuration.h index f0bac000a6..73aa591984 100644 --- a/config/examples/Creality/Ender-5 Plus/Configuration.h +++ b/config/examples/Creality/Ender-5 Plus/Configuration.h @@ -1506,6 +1506,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h index 05dd49ef09..b5d505e58c 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h @@ -1498,6 +1498,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration.h index e0c4104ee2..53b6d6ec6b 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration.h @@ -1498,6 +1498,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h index 7e3c1a0153..bf8ce52f5a 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h @@ -1493,6 +1493,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration.h index 88e9808749..35690b98a9 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration.h @@ -1498,6 +1498,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration.h b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration.h index 2fb853d8ab..9646021770 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration.h @@ -1498,6 +1498,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration.h b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration.h index 5e43ea9e71..11b85f1fd7 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration.h @@ -1498,6 +1498,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h index cfbb5b03e5..222cfb51f9 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h @@ -1498,6 +1498,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h index d0403a6e64..7ec0a05969 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h @@ -1527,6 +1527,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h index d5547be0c5..f3b7b8a25f 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h @@ -1498,6 +1498,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration.h index c53b06787d..73a727e10f 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration.h @@ -1498,6 +1498,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration.h index ca0aca046d..e65e55410b 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration.h @@ -1496,6 +1496,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h index 6c7e327544..816386e0b5 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -1496,6 +1496,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Creality/Ender-5/CrealityV1/Configuration.h b/config/examples/Creality/Ender-5/CrealityV1/Configuration.h index 1612085a37..ff66d2d6d7 100644 --- a/config/examples/Creality/Ender-5/CrealityV1/Configuration.h +++ b/config/examples/Creality/Ender-5/CrealityV1/Configuration.h @@ -1498,6 +1498,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Creality/Ender-5/CrealityV427/Configuration.h b/config/examples/Creality/Ender-5/CrealityV427/Configuration.h index 6488a6fd22..848b788372 100644 --- a/config/examples/Creality/Ender-5/CrealityV427/Configuration.h +++ b/config/examples/Creality/Ender-5/CrealityV427/Configuration.h @@ -1498,6 +1498,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Creality/Ender-6/Configuration.h b/config/examples/Creality/Ender-6/Configuration.h index 7054f355c9..b68c124cc7 100644 --- a/config/examples/Creality/Ender-6/Configuration.h +++ b/config/examples/Creality/Ender-6/Configuration.h @@ -1506,6 +1506,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration.h b/config/examples/Dagoma/Disco Ultimate/Configuration.h index 94a4a9e154..287431f7ef 100644 --- a/config/examples/Dagoma/Disco Ultimate/Configuration.h +++ b/config/examples/Dagoma/Disco Ultimate/Configuration.h @@ -1497,6 +1497,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Daycom/3DP-100/Configuration.h b/config/examples/Daycom/3DP-100/Configuration.h index 52fda31cfb..b3a9d2280c 100644 --- a/config/examples/Daycom/3DP-100/Configuration.h +++ b/config/examples/Daycom/3DP-100/Configuration.h @@ -1500,6 +1500,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/EXP3D/Imprimante multifonction/Configuration.h b/config/examples/EXP3D/Imprimante multifonction/Configuration.h index 4341a26238..b2b5067e53 100644 --- a/config/examples/EXP3D/Imprimante multifonction/Configuration.h +++ b/config/examples/EXP3D/Imprimante multifonction/Configuration.h @@ -1497,6 +1497,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Einstart-S/Configuration.h b/config/examples/Einstart-S/Configuration.h index 82c7c9c797..83205e8d67 100644 --- a/config/examples/Einstart-S/Configuration.h +++ b/config/examples/Einstart-S/Configuration.h @@ -1502,6 +1502,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Eryone/Thinker SE/Configuration.h b/config/examples/Eryone/Thinker SE/Configuration.h index 84bd6b4eb7..3b464f2290 100644 --- a/config/examples/Eryone/Thinker SE/Configuration.h +++ b/config/examples/Eryone/Thinker SE/Configuration.h @@ -1514,6 +1514,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Eryone/Thinker V2/Configuration.h b/config/examples/Eryone/Thinker V2/Configuration.h index de7c733316..669ff2679c 100644 --- a/config/examples/Eryone/Thinker V2/Configuration.h +++ b/config/examples/Eryone/Thinker V2/Configuration.h @@ -1513,6 +1513,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/FYSETC/AIO_II/Configuration.h b/config/examples/FYSETC/AIO_II/Configuration.h index 932da98c41..c00cd938c6 100644 --- a/config/examples/FYSETC/AIO_II/Configuration.h +++ b/config/examples/FYSETC/AIO_II/Configuration.h @@ -1498,6 +1498,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/FYSETC/F6_13/Configuration.h b/config/examples/FYSETC/F6_13/Configuration.h index 59dc794941..508d4143ba 100644 --- a/config/examples/FYSETC/F6_13/Configuration.h +++ b/config/examples/FYSETC/F6_13/Configuration.h @@ -1499,6 +1499,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/FYSETC/S6/Configuration.h b/config/examples/FYSETC/S6/Configuration.h index 656b4737d8..cf10d8226e 100644 --- a/config/examples/FYSETC/S6/Configuration.h +++ b/config/examples/FYSETC/S6/Configuration.h @@ -1497,6 +1497,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Felix/DUAL/Configuration.h b/config/examples/Felix/DUAL/Configuration.h index 043e37013c..bab20e066a 100644 --- a/config/examples/Felix/DUAL/Configuration.h +++ b/config/examples/Felix/DUAL/Configuration.h @@ -1498,6 +1498,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Felix/Single/Configuration.h b/config/examples/Felix/Single/Configuration.h index deeafc7955..95c08c731e 100644 --- a/config/examples/Felix/Single/Configuration.h +++ b/config/examples/Felix/Single/Configuration.h @@ -1498,6 +1498,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/FlashForge/Creator 2X/Configuration.h b/config/examples/FlashForge/Creator 2X/Configuration.h index 8803c0aa99..4752e1079e 100644 --- a/config/examples/FlashForge/Creator 2X/Configuration.h +++ b/config/examples/FlashForge/Creator 2X/Configuration.h @@ -1499,6 +1499,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/FlashForge/CreatorPro/Configuration.h b/config/examples/FlashForge/CreatorPro/Configuration.h index 9a85c1d20e..bee3c68c70 100644 --- a/config/examples/FlashForge/CreatorPro/Configuration.h +++ b/config/examples/FlashForge/CreatorPro/Configuration.h @@ -1499,6 +1499,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/FlyingBear/P905H/Configuration.h b/config/examples/FlyingBear/P905H/Configuration.h index 41cc9067cd..cee048c2f5 100644 --- a/config/examples/FlyingBear/P905H/Configuration.h +++ b/config/examples/FlyingBear/P905H/Configuration.h @@ -1502,6 +1502,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/FolgerTech/i3-2020/Configuration.h b/config/examples/FolgerTech/i3-2020/Configuration.h index 3d86d3f768..d371d71dbc 100644 --- a/config/examples/FolgerTech/i3-2020/Configuration.h +++ b/config/examples/FolgerTech/i3-2020/Configuration.h @@ -1499,6 +1499,8 @@ #define UBL_Z_RAISE_WHEN_OFF_MESH 2.50// When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Formbot/Raptor/Configuration.h b/config/examples/Formbot/Raptor/Configuration.h index a88aaa4bc4..656c9383c1 100644 --- a/config/examples/Formbot/Raptor/Configuration.h +++ b/config/examples/Formbot/Raptor/Configuration.h @@ -1608,6 +1608,8 @@ #define UBL_Z_RAISE_WHEN_OFF_MESH 0.0 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Formbot/T_Rex_2+/Configuration.h b/config/examples/Formbot/T_Rex_2+/Configuration.h index ca84ac0794..2fcc3c639e 100644 --- a/config/examples/Formbot/T_Rex_2+/Configuration.h +++ b/config/examples/Formbot/T_Rex_2+/Configuration.h @@ -1497,6 +1497,8 @@ #define UBL_Z_RAISE_WHEN_OFF_MESH 0.0 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Formbot/T_Rex_3/Configuration.h b/config/examples/Formbot/T_Rex_3/Configuration.h index 9a1251dedc..bb72827cb1 100644 --- a/config/examples/Formbot/T_Rex_3/Configuration.h +++ b/config/examples/Formbot/T_Rex_3/Configuration.h @@ -1510,6 +1510,8 @@ #define UBL_Z_RAISE_WHEN_OFF_MESH 0.0 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Geeetech/A10/Configuration.h b/config/examples/Geeetech/A10/Configuration.h index 2a35478eeb..062f1f3ab6 100644 --- a/config/examples/Geeetech/A10/Configuration.h +++ b/config/examples/Geeetech/A10/Configuration.h @@ -1497,6 +1497,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Geeetech/A10D/Configuration.h b/config/examples/Geeetech/A10D/Configuration.h index 75d1590714..eabb6fd283 100644 --- a/config/examples/Geeetech/A10D/Configuration.h +++ b/config/examples/Geeetech/A10D/Configuration.h @@ -1498,6 +1498,8 @@ #define UBL_Z_RAISE_WHEN_OFF_MESH 0 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Geeetech/A10M/Stock LCD/Configuration.h b/config/examples/Geeetech/A10M/Stock LCD/Configuration.h index 47147a4626..d3b9d27523 100644 --- a/config/examples/Geeetech/A10M/Stock LCD/Configuration.h +++ b/config/examples/Geeetech/A10M/Stock LCD/Configuration.h @@ -1499,6 +1499,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration.h b/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration.h index ac8eceb591..b7023bdf51 100644 --- a/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration.h +++ b/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration.h @@ -1499,6 +1499,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Geeetech/A10PRO/Configuration.h b/config/examples/Geeetech/A10PRO/Configuration.h index 150ad76d27..68c8790c04 100644 --- a/config/examples/Geeetech/A10PRO/Configuration.h +++ b/config/examples/Geeetech/A10PRO/Configuration.h @@ -1497,6 +1497,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Geeetech/A10T/Stock LCD/Configuration.h b/config/examples/Geeetech/A10T/Stock LCD/Configuration.h index d60701cf72..350127f565 100644 --- a/config/examples/Geeetech/A10T/Stock LCD/Configuration.h +++ b/config/examples/Geeetech/A10T/Stock LCD/Configuration.h @@ -1500,6 +1500,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration.h b/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration.h index fcba640aac..5a64b1c9d4 100644 --- a/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration.h +++ b/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration.h @@ -1500,6 +1500,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Geeetech/A20/Configuration.h b/config/examples/Geeetech/A20/Configuration.h index 3e45cca712..62b0c1cb5c 100644 --- a/config/examples/Geeetech/A20/Configuration.h +++ b/config/examples/Geeetech/A20/Configuration.h @@ -1498,6 +1498,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Geeetech/A20M/Configuration.h b/config/examples/Geeetech/A20M/Configuration.h index 6d3686baf5..67f880845d 100644 --- a/config/examples/Geeetech/A20M/Configuration.h +++ b/config/examples/Geeetech/A20M/Configuration.h @@ -1499,6 +1499,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Geeetech/A20T/Configuration.h b/config/examples/Geeetech/A20T/Configuration.h index 4c9d039800..2785399706 100644 --- a/config/examples/Geeetech/A20T/Configuration.h +++ b/config/examples/Geeetech/A20T/Configuration.h @@ -1500,6 +1500,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Geeetech/A30/Configuration.h b/config/examples/Geeetech/A30/Configuration.h index c553665de2..2403756b47 100644 --- a/config/examples/Geeetech/A30/Configuration.h +++ b/config/examples/Geeetech/A30/Configuration.h @@ -1496,6 +1496,8 @@ #define UBL_Z_RAISE_WHEN_OFF_MESH 0 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Geeetech/A30M/Configuration.h b/config/examples/Geeetech/A30M/Configuration.h index 422d8378bb..78ce466a4c 100644 --- a/config/examples/Geeetech/A30M/Configuration.h +++ b/config/examples/Geeetech/A30M/Configuration.h @@ -1496,6 +1496,8 @@ #define UBL_Z_RAISE_WHEN_OFF_MESH 0 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Geeetech/A30T/Configuration.h b/config/examples/Geeetech/A30T/Configuration.h index 0c034f0b54..fb5e72b018 100644 --- a/config/examples/Geeetech/A30T/Configuration.h +++ b/config/examples/Geeetech/A30T/Configuration.h @@ -1496,6 +1496,8 @@ #define UBL_Z_RAISE_WHEN_OFF_MESH 0 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Geeetech/D200/Configuration.h b/config/examples/Geeetech/D200/Configuration.h index bff5af1c14..b12359bcdc 100644 --- a/config/examples/Geeetech/D200/Configuration.h +++ b/config/examples/Geeetech/D200/Configuration.h @@ -1496,6 +1496,8 @@ #define UBL_Z_RAISE_WHEN_OFF_MESH 0 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Geeetech/Duplicator5/Configuration.h b/config/examples/Geeetech/Duplicator5/Configuration.h index aa7452b9b0..0160749c15 100644 --- a/config/examples/Geeetech/Duplicator5/Configuration.h +++ b/config/examples/Geeetech/Duplicator5/Configuration.h @@ -1497,6 +1497,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Geeetech/E180/Configuration.h b/config/examples/Geeetech/E180/Configuration.h index 2a20424e7f..982432f9c5 100644 --- a/config/examples/Geeetech/E180/Configuration.h +++ b/config/examples/Geeetech/E180/Configuration.h @@ -1497,6 +1497,8 @@ #define UBL_Z_RAISE_WHEN_OFF_MESH 0 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Geeetech/GT2560/Configuration.h b/config/examples/Geeetech/GT2560/Configuration.h index 2a1c987d89..864a77be8a 100644 --- a/config/examples/Geeetech/GT2560/Configuration.h +++ b/config/examples/Geeetech/GT2560/Configuration.h @@ -1502,6 +1502,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h index cd85c93e48..8fa49beba7 100644 --- a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h +++ b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h @@ -1497,6 +1497,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Geeetech/M201/Configuration.h b/config/examples/Geeetech/M201/Configuration.h index e26440db49..541acb9cc1 100644 --- a/config/examples/Geeetech/M201/Configuration.h +++ b/config/examples/Geeetech/M201/Configuration.h @@ -1496,6 +1496,8 @@ #define UBL_Z_RAISE_WHEN_OFF_MESH 0 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Geeetech/MeCreator2/Configuration.h b/config/examples/Geeetech/MeCreator2/Configuration.h index dd16256403..88adc70502 100644 --- a/config/examples/Geeetech/MeCreator2/Configuration.h +++ b/config/examples/Geeetech/MeCreator2/Configuration.h @@ -1496,6 +1496,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Geeetech/Me_creator/Configuration.h b/config/examples/Geeetech/Me_creator/Configuration.h index ab151338fc..85ef9f801f 100644 --- a/config/examples/Geeetech/Me_creator/Configuration.h +++ b/config/examples/Geeetech/Me_creator/Configuration.h @@ -1497,6 +1497,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Geeetech/Me_ducer/Configuration.h b/config/examples/Geeetech/Me_ducer/Configuration.h index 05e56aa461..746bff6ed1 100644 --- a/config/examples/Geeetech/Me_ducer/Configuration.h +++ b/config/examples/Geeetech/Me_ducer/Configuration.h @@ -1497,6 +1497,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Geeetech/PI3A PRO/Configuration.h b/config/examples/Geeetech/PI3A PRO/Configuration.h index b077f5c0b6..f126e0f955 100644 --- a/config/examples/Geeetech/PI3A PRO/Configuration.h +++ b/config/examples/Geeetech/PI3A PRO/Configuration.h @@ -1507,6 +1507,8 @@ #define UBL_Z_RAISE_WHEN_OFF_MESH 0 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h index 5bd9ff78db..34f00353b1 100644 --- a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h @@ -1508,6 +1508,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h index 4403034936..bdf427ecb9 100644 --- a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h @@ -1507,6 +1507,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h index b617229493..bdb693439b 100644 --- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h @@ -1497,6 +1497,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h index d58a204a8f..40bb0125e2 100644 --- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h @@ -1497,6 +1497,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/HMS434/Configuration.h b/config/examples/HMS434/Configuration.h index 7c8a0891ad..7bcbc4bb98 100644 --- a/config/examples/HMS434/Configuration.h +++ b/config/examples/HMS434/Configuration.h @@ -1495,6 +1495,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Infitary/i3-M508/Configuration.h b/config/examples/Infitary/i3-M508/Configuration.h index 610ba6bfef..77c05e7efc 100644 --- a/config/examples/Infitary/i3-M508/Configuration.h +++ b/config/examples/Infitary/i3-M508/Configuration.h @@ -1497,6 +1497,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Intamsys/FunmatHT 4988/Configuration.h b/config/examples/Intamsys/FunmatHT 4988/Configuration.h index 58218625a3..2a0a927cdc 100644 --- a/config/examples/Intamsys/FunmatHT 4988/Configuration.h +++ b/config/examples/Intamsys/FunmatHT 4988/Configuration.h @@ -1497,6 +1497,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/JGAurora/A1/Configuration.h b/config/examples/JGAurora/A1/Configuration.h index a0865951c4..596307a94b 100644 --- a/config/examples/JGAurora/A1/Configuration.h +++ b/config/examples/JGAurora/A1/Configuration.h @@ -1501,6 +1501,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/JGAurora/A3/Configuration.h b/config/examples/JGAurora/A3/Configuration.h index 0fa6675f4e..ecc04294e9 100644 --- a/config/examples/JGAurora/A3/Configuration.h +++ b/config/examples/JGAurora/A3/Configuration.h @@ -1497,6 +1497,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/JGAurora/A5/Configuration.h b/config/examples/JGAurora/A5/Configuration.h index 238ca5eef6..b42009bf52 100644 --- a/config/examples/JGAurora/A5/Configuration.h +++ b/config/examples/JGAurora/A5/Configuration.h @@ -1505,6 +1505,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/JGAurora/A5S/Configuration.h b/config/examples/JGAurora/A5S/Configuration.h index 2e2e653e03..15074479a5 100644 --- a/config/examples/JGAurora/A5S/Configuration.h +++ b/config/examples/JGAurora/A5S/Configuration.h @@ -1501,6 +1501,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/JGAurora/Magic/Configuration.h b/config/examples/JGAurora/Magic/Configuration.h index 7483edfbf1..d2f94cff82 100644 --- a/config/examples/JGAurora/Magic/Configuration.h +++ b/config/examples/JGAurora/Magic/Configuration.h @@ -1497,6 +1497,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Kingroon/KP3/Configuration.h b/config/examples/Kingroon/KP3/Configuration.h index b8d6f828e8..87512f1b21 100644 --- a/config/examples/Kingroon/KP3/Configuration.h +++ b/config/examples/Kingroon/KP3/Configuration.h @@ -1496,6 +1496,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Labists/ET4/Configuration.h b/config/examples/Labists/ET4/Configuration.h index 119e9112ea..127190c35b 100644 --- a/config/examples/Labists/ET4/Configuration.h +++ b/config/examples/Labists/ET4/Configuration.h @@ -1503,6 +1503,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/MBot/Cube/Configuration.h b/config/examples/MBot/Cube/Configuration.h index 5299a81139..18109311b5 100644 --- a/config/examples/MBot/Cube/Configuration.h +++ b/config/examples/MBot/Cube/Configuration.h @@ -1499,6 +1499,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/MakerFarm/Pegasus 12/Configuration.h b/config/examples/MakerFarm/Pegasus 12/Configuration.h index 3014565da2..71ba6c133e 100644 --- a/config/examples/MakerFarm/Pegasus 12/Configuration.h +++ b/config/examples/MakerFarm/Pegasus 12/Configuration.h @@ -1503,6 +1503,8 @@ #define UBL_Z_RAISE_WHEN_OFF_MESH 0 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/MakerParts/Configuration.h b/config/examples/MakerParts/Configuration.h index 059b4e3d28..0328893b5b 100644 --- a/config/examples/MakerParts/Configuration.h +++ b/config/examples/MakerParts/Configuration.h @@ -1497,6 +1497,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Malyan/M150/Configuration.h b/config/examples/Malyan/M150/Configuration.h index 432e8f3db7..0accca7c75 100644 --- a/config/examples/Malyan/M150/Configuration.h +++ b/config/examples/Malyan/M150/Configuration.h @@ -1525,6 +1525,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Malyan/M200/Configuration.h b/config/examples/Malyan/M200/Configuration.h index 2b63a050a0..91ddf6f9b5 100644 --- a/config/examples/Malyan/M200/Configuration.h +++ b/config/examples/Malyan/M200/Configuration.h @@ -1503,6 +1503,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Micromake/C1/basic/Configuration.h b/config/examples/Micromake/C1/basic/Configuration.h index 0ebe061813..9c0cb28ba2 100644 --- a/config/examples/Micromake/C1/basic/Configuration.h +++ b/config/examples/Micromake/C1/basic/Configuration.h @@ -1501,6 +1501,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Micromake/C1/enhanced/Configuration.h b/config/examples/Micromake/C1/enhanced/Configuration.h index bdb482167a..958cb4d99f 100644 --- a/config/examples/Micromake/C1/enhanced/Configuration.h +++ b/config/examples/Micromake/C1/enhanced/Configuration.h @@ -1501,6 +1501,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Mks/Robin/Configuration.h b/config/examples/Mks/Robin/Configuration.h index 4a793acab5..092e7ea6f4 100644 --- a/config/examples/Mks/Robin/Configuration.h +++ b/config/examples/Mks/Robin/Configuration.h @@ -1497,6 +1497,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Mks/Robin_Lite3/Configuration.h b/config/examples/Mks/Robin_Lite3/Configuration.h index 02aa3ad3f7..641262ab24 100644 --- a/config/examples/Mks/Robin_Lite3/Configuration.h +++ b/config/examples/Mks/Robin_Lite3/Configuration.h @@ -1504,6 +1504,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Mks/Robin_Pro/Configuration.h b/config/examples/Mks/Robin_Pro/Configuration.h index 5ae1fdfe94..d4eadd0451 100644 --- a/config/examples/Mks/Robin_Pro/Configuration.h +++ b/config/examples/Mks/Robin_Pro/Configuration.h @@ -1499,6 +1499,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Mks/Sbase/Configuration.h b/config/examples/Mks/Sbase/Configuration.h index c3eb083329..445ed4e856 100644 --- a/config/examples/Mks/Sbase/Configuration.h +++ b/config/examples/Mks/Sbase/Configuration.h @@ -1497,6 +1497,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Modix/Big60/Configuration.h b/config/examples/Modix/Big60/Configuration.h index 7bed79eb46..b06b9d2f47 100644 --- a/config/examples/Modix/Big60/Configuration.h +++ b/config/examples/Modix/Big60/Configuration.h @@ -1497,6 +1497,8 @@ #define UBL_Z_RAISE_WHEN_OFF_MESH 0.0 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Nextion/Configuration.h b/config/examples/Nextion/Configuration.h index 6a02fe769f..4b7f0b9156 100644 --- a/config/examples/Nextion/Configuration.h +++ b/config/examples/Nextion/Configuration.h @@ -1497,6 +1497,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Ortur 4/Configuration.h b/config/examples/Ortur 4/Configuration.h index a550d42227..a3fa9f637e 100644 --- a/config/examples/Ortur 4/Configuration.h +++ b/config/examples/Ortur 4/Configuration.h @@ -1497,6 +1497,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Printrbot/PrintrboardG2/Configuration.h b/config/examples/Printrbot/PrintrboardG2/Configuration.h index ab6d46806c..9f93b70634 100644 --- a/config/examples/Printrbot/PrintrboardG2/Configuration.h +++ b/config/examples/Printrbot/PrintrboardG2/Configuration.h @@ -1499,6 +1499,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Printrbot/Simple Metal RevD/Configuration.h b/config/examples/Printrbot/Simple Metal RevD/Configuration.h index 7701935622..59367adf78 100644 --- a/config/examples/Printrbot/Simple Metal RevD/Configuration.h +++ b/config/examples/Printrbot/Simple Metal RevD/Configuration.h @@ -1497,6 +1497,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Prusa/MK3/Configuration.h b/config/examples/Prusa/MK3/Configuration.h index 5dbb16395e..2f7f8aadbc 100644 --- a/config/examples/Prusa/MK3/Configuration.h +++ b/config/examples/Prusa/MK3/Configuration.h @@ -1525,6 +1525,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h index 1a6d3704c7..1c47287cbc 100644 --- a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h +++ b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h @@ -1497,6 +1497,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Qidi/Qidi 1/Configuration.h b/config/examples/Qidi/Qidi 1/Configuration.h index 6cd5a1f04a..a60bc55f83 100644 --- a/config/examples/Qidi/Qidi 1/Configuration.h +++ b/config/examples/Qidi/Qidi 1/Configuration.h @@ -1500,6 +1500,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Raiscube/A8r/Configuration.h b/config/examples/Raiscube/A8r/Configuration.h index e4c405314e..2dba4ee500 100644 --- a/config/examples/Raiscube/A8r/Configuration.h +++ b/config/examples/Raiscube/A8r/Configuration.h @@ -1537,6 +1537,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/RapideLite/RL200/Configuration.h b/config/examples/RapideLite/RL200/Configuration.h index 71237029d9..ae62161ed0 100644 --- a/config/examples/RapideLite/RL200/Configuration.h +++ b/config/examples/RapideLite/RL200/Configuration.h @@ -1497,6 +1497,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Renkforce/RF100/Configuration.h b/config/examples/Renkforce/RF100/Configuration.h index d89116a3da..925e6fe894 100644 --- a/config/examples/Renkforce/RF100/Configuration.h +++ b/config/examples/Renkforce/RF100/Configuration.h @@ -1501,6 +1501,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Renkforce/RF100XL/Configuration.h b/config/examples/Renkforce/RF100XL/Configuration.h index 6aeb15c655..44e18b93ed 100644 --- a/config/examples/Renkforce/RF100XL/Configuration.h +++ b/config/examples/Renkforce/RF100XL/Configuration.h @@ -1501,6 +1501,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Renkforce/RF100v2/Configuration.h b/config/examples/Renkforce/RF100v2/Configuration.h index c82d56fb74..b32f583728 100644 --- a/config/examples/Renkforce/RF100v2/Configuration.h +++ b/config/examples/Renkforce/RF100v2/Configuration.h @@ -1501,6 +1501,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/RepRapPro/Huxley/Configuration.h b/config/examples/RepRapPro/Huxley/Configuration.h index 185397d4cb..22e8ec1dd3 100644 --- a/config/examples/RepRapPro/Huxley/Configuration.h +++ b/config/examples/RepRapPro/Huxley/Configuration.h @@ -1547,6 +1547,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/RepRapWorld/Megatronics/Configuration.h b/config/examples/RepRapWorld/Megatronics/Configuration.h index 268a4f1ad0..403d567349 100644 --- a/config/examples/RepRapWorld/Megatronics/Configuration.h +++ b/config/examples/RepRapWorld/Megatronics/Configuration.h @@ -1497,6 +1497,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/RigidBot/Configuration.h b/config/examples/RigidBot/Configuration.h index 2af953134a..f50e48e416 100644 --- a/config/examples/RigidBot/Configuration.h +++ b/config/examples/RigidBot/Configuration.h @@ -1512,6 +1512,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Robo3D/R1+/Configuration.h b/config/examples/Robo3D/R1+/Configuration.h index b7aa2bfd2a..8a94b9684c 100644 --- a/config/examples/Robo3D/R1+/Configuration.h +++ b/config/examples/Robo3D/R1+/Configuration.h @@ -1497,6 +1497,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/SCARA/MP_SCARA/Configuration.h b/config/examples/SCARA/MP_SCARA/Configuration.h index bc15ac0cbf..b2cd467587 100644 --- a/config/examples/SCARA/MP_SCARA/Configuration.h +++ b/config/examples/SCARA/MP_SCARA/Configuration.h @@ -1543,6 +1543,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/SCARA/Morgan/Configuration.h b/config/examples/SCARA/Morgan/Configuration.h index 7a92f16555..d16890a905 100644 --- a/config/examples/SCARA/Morgan/Configuration.h +++ b/config/examples/SCARA/Morgan/Configuration.h @@ -1543,6 +1543,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration.h b/config/examples/STM32/Black_STM32F407VET6/Configuration.h index a8d7a90efd..cf610c4f3f 100644 --- a/config/examples/STM32/Black_STM32F407VET6/Configuration.h +++ b/config/examples/STM32/Black_STM32F407VET6/Configuration.h @@ -1497,6 +1497,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/STM32/STM32F103RE/Configuration.h b/config/examples/STM32/STM32F103RE/Configuration.h index cb72be9a8d..37f004631f 100644 --- a/config/examples/STM32/STM32F103RE/Configuration.h +++ b/config/examples/STM32/STM32F103RE/Configuration.h @@ -1499,6 +1499,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/STM32/STM32F4/Configuration.h b/config/examples/STM32/STM32F4/Configuration.h index 9f58ac98dd..abe3f9aa1f 100644 --- a/config/examples/STM32/STM32F4/Configuration.h +++ b/config/examples/STM32/STM32F4/Configuration.h @@ -1497,6 +1497,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Sanguinololu/Configuration.h b/config/examples/Sanguinololu/Configuration.h index efc5c26396..863c46fde4 100644 --- a/config/examples/Sanguinololu/Configuration.h +++ b/config/examples/Sanguinololu/Configuration.h @@ -1528,6 +1528,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Sovol/SV-01/CrealityV22/Configuration.h b/config/examples/Sovol/SV-01/CrealityV22/Configuration.h index af2dc2ad93..587ccd0ace 100644 --- a/config/examples/Sovol/SV-01/CrealityV22/Configuration.h +++ b/config/examples/Sovol/SV-01/CrealityV22/Configuration.h @@ -1498,6 +1498,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Sovol/SV-01/CrealityV221/Configuration.h b/config/examples/Sovol/SV-01/CrealityV221/Configuration.h index ec4fb9bdd3..cc6d22d5aa 100644 --- a/config/examples/Sovol/SV-01/CrealityV221/Configuration.h +++ b/config/examples/Sovol/SV-01/CrealityV221/Configuration.h @@ -1498,6 +1498,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/TPARA/AXEL_TPARA/Configuration.h b/config/examples/TPARA/AXEL_TPARA/Configuration.h index 21bc1fbfc6..a66bbbf1af 100644 --- a/config/examples/TPARA/AXEL_TPARA/Configuration.h +++ b/config/examples/TPARA/AXEL_TPARA/Configuration.h @@ -1523,6 +1523,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Tevo/Michelangelo/Configuration.h b/config/examples/Tevo/Michelangelo/Configuration.h index 353ca9e073..add5a0dbe3 100644 --- a/config/examples/Tevo/Michelangelo/Configuration.h +++ b/config/examples/Tevo/Michelangelo/Configuration.h @@ -1498,6 +1498,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Tevo/Nereus/Configuration.h b/config/examples/Tevo/Nereus/Configuration.h index f202137b4f..54e7235702 100644 --- a/config/examples/Tevo/Nereus/Configuration.h +++ b/config/examples/Tevo/Nereus/Configuration.h @@ -1498,6 +1498,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Tevo/Tarantula Pro/Configuration.h b/config/examples/Tevo/Tarantula Pro/Configuration.h index 4e15c0cb9d..62931a823e 100644 --- a/config/examples/Tevo/Tarantula Pro/Configuration.h +++ b/config/examples/Tevo/Tarantula Pro/Configuration.h @@ -1498,6 +1498,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h index 6426e4fe6b..de1368f21c 100644 --- a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h +++ b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h @@ -1498,6 +1498,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h index b552f83a55..7e3d72c529 100644 --- a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h +++ b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h @@ -1498,6 +1498,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/TheBorg/Configuration.h b/config/examples/TheBorg/Configuration.h index 580bedc6ff..bd4626dbc6 100644 --- a/config/examples/TheBorg/Configuration.h +++ b/config/examples/TheBorg/Configuration.h @@ -1497,6 +1497,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/TinyBoy2/Configuration.h b/config/examples/TinyBoy2/Configuration.h index a3dff89b02..a9728b58da 100644 --- a/config/examples/TinyBoy2/Configuration.h +++ b/config/examples/TinyBoy2/Configuration.h @@ -1543,6 +1543,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Tronxy/X1/Configuration.h b/config/examples/Tronxy/X1/Configuration.h index 97427591c4..fabe0a0e45 100644 --- a/config/examples/Tronxy/X1/Configuration.h +++ b/config/examples/Tronxy/X1/Configuration.h @@ -1498,6 +1498,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Tronxy/X3A/Configuration.h b/config/examples/Tronxy/X3A/Configuration.h index f0a2351012..ed816a0cc6 100644 --- a/config/examples/Tronxy/X3A/Configuration.h +++ b/config/examples/Tronxy/X3A/Configuration.h @@ -1501,6 +1501,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Tronxy/X5S-2E/Configuration.h b/config/examples/Tronxy/X5S-2E/Configuration.h index 57d9b4531e..a6eb92779b 100644 --- a/config/examples/Tronxy/X5S-2E/Configuration.h +++ b/config/examples/Tronxy/X5S-2E/Configuration.h @@ -1506,6 +1506,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Tronxy/X5S/Configuration.h b/config/examples/Tronxy/X5S/Configuration.h index 6a61020a68..22e6887cec 100644 --- a/config/examples/Tronxy/X5S/Configuration.h +++ b/config/examples/Tronxy/X5S/Configuration.h @@ -1497,6 +1497,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Tronxy/X5SA/Configuration.h b/config/examples/Tronxy/X5SA/Configuration.h index 4c346ccf9f..a5a1482628 100644 --- a/config/examples/Tronxy/X5SA/Configuration.h +++ b/config/examples/Tronxy/X5SA/Configuration.h @@ -1499,6 +1499,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Tronxy/XY100/Configuration.h b/config/examples/Tronxy/XY100/Configuration.h index aa1efefd8b..9fa0896fb6 100644 --- a/config/examples/Tronxy/XY100/Configuration.h +++ b/config/examples/Tronxy/XY100/Configuration.h @@ -1504,6 +1504,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Two Trees/BlueR Plus/Configuration.h b/config/examples/Two Trees/BlueR Plus/Configuration.h index 9f0ddc68ac..01a0f325b3 100644 --- a/config/examples/Two Trees/BlueR Plus/Configuration.h +++ b/config/examples/Two Trees/BlueR Plus/Configuration.h @@ -1500,6 +1500,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Two Trees/BlueR/BlueR V1/Configuration.h b/config/examples/Two Trees/BlueR/BlueR V1/Configuration.h index 15b2a8e734..1d7dd15308 100644 --- a/config/examples/Two Trees/BlueR/BlueR V1/Configuration.h +++ b/config/examples/Two Trees/BlueR/BlueR V1/Configuration.h @@ -1526,6 +1526,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Two Trees/BlueR/BlueR V2/Configuration.h b/config/examples/Two Trees/BlueR/BlueR V2/Configuration.h index 2fdce1a248..fd59a6e743 100644 --- a/config/examples/Two Trees/BlueR/BlueR V2/Configuration.h +++ b/config/examples/Two Trees/BlueR/BlueR V2/Configuration.h @@ -1531,6 +1531,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Two Trees/BlueR/BlueR V3/Configuration.h b/config/examples/Two Trees/BlueR/BlueR V3/Configuration.h index e6caccae5c..350df6dc05 100644 --- a/config/examples/Two Trees/BlueR/BlueR V3/Configuration.h +++ b/config/examples/Two Trees/BlueR/BlueR V3/Configuration.h @@ -1530,6 +1530,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration.h b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration.h index 74a0354b95..d11f131154 100644 --- a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration.h +++ b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration.h @@ -1538,6 +1538,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Two Trees/Sapphire Pro/Configuration.h b/config/examples/Two Trees/Sapphire Pro/Configuration.h index 8050320662..9204307aee 100644 --- a/config/examples/Two Trees/Sapphire Pro/Configuration.h +++ b/config/examples/Two Trees/Sapphire Pro/Configuration.h @@ -1529,6 +1529,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/UltiMachine/Archim1/Configuration.h b/config/examples/UltiMachine/Archim1/Configuration.h index 3c92974ae3..340657ecfd 100644 --- a/config/examples/UltiMachine/Archim1/Configuration.h +++ b/config/examples/UltiMachine/Archim1/Configuration.h @@ -1497,6 +1497,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/UltiMachine/Archim2/Configuration.h b/config/examples/UltiMachine/Archim2/Configuration.h index a0449ac557..c229a5d791 100644 --- a/config/examples/UltiMachine/Archim2/Configuration.h +++ b/config/examples/UltiMachine/Archim2/Configuration.h @@ -1497,6 +1497,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/VORONDesign/Configuration.h b/config/examples/VORONDesign/Configuration.h index f265b3a0d1..91f7ab388f 100644 --- a/config/examples/VORONDesign/Configuration.h +++ b/config/examples/VORONDesign/Configuration.h @@ -1497,6 +1497,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Velleman/K8200/Configuration.h b/config/examples/Velleman/K8200/Configuration.h index 65d39228a2..7ce48581d4 100644 --- a/config/examples/Velleman/K8200/Configuration.h +++ b/config/examples/Velleman/K8200/Configuration.h @@ -1518,6 +1518,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Velleman/K8400/Dual-head/Configuration.h b/config/examples/Velleman/K8400/Dual-head/Configuration.h index cb51e5104d..5ef621aa3e 100644 --- a/config/examples/Velleman/K8400/Dual-head/Configuration.h +++ b/config/examples/Velleman/K8400/Dual-head/Configuration.h @@ -1498,6 +1498,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Velleman/K8400/Single-head/Configuration.h b/config/examples/Velleman/K8400/Single-head/Configuration.h index 90daccdf1d..6adcddf570 100644 --- a/config/examples/Velleman/K8400/Single-head/Configuration.h +++ b/config/examples/Velleman/K8400/Single-head/Configuration.h @@ -1498,6 +1498,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/WASP/PowerWASP/Configuration.h b/config/examples/WASP/PowerWASP/Configuration.h index ea99c47c82..8aa7ba7c59 100644 --- a/config/examples/WASP/PowerWASP/Configuration.h +++ b/config/examples/WASP/PowerWASP/Configuration.h @@ -1511,6 +1511,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Wanhao/Duplicator 4S/Configuration.h b/config/examples/Wanhao/Duplicator 4S/Configuration.h index 183cf4de52..6479d32fb6 100644 --- a/config/examples/Wanhao/Duplicator 4S/Configuration.h +++ b/config/examples/Wanhao/Duplicator 4S/Configuration.h @@ -1499,6 +1499,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Wanhao/Duplicator 6/Configuration.h b/config/examples/Wanhao/Duplicator 6/Configuration.h index 34a542f624..30bfd23b7c 100644 --- a/config/examples/Wanhao/Duplicator 6/Configuration.h +++ b/config/examples/Wanhao/Duplicator 6/Configuration.h @@ -1497,6 +1497,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h b/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h index fe50f286e1..a497601ddc 100644 --- a/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h +++ b/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h @@ -1497,6 +1497,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h index 00b9acdb09..8f9b52e24d 100644 --- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h +++ b/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h @@ -1498,6 +1498,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Weistek/wt150/Configuration.h b/config/examples/Weistek/wt150/Configuration.h index 72357d426b..73b8249657 100644 --- a/config/examples/Weistek/wt150/Configuration.h +++ b/config/examples/Weistek/wt150/Configuration.h @@ -1498,6 +1498,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Zonestar/P802M/Configuration.h b/config/examples/Zonestar/P802M/Configuration.h index fa8bbda9a6..fa0c7fe415 100644 --- a/config/examples/Zonestar/P802M/Configuration.h +++ b/config/examples/Zonestar/P802M/Configuration.h @@ -1498,6 +1498,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h index dff63b6b4b..6bc7ea7524 100755 --- a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h +++ b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h @@ -1501,6 +1501,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h index 03edf14e80..a711e90a4d 100644 --- a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h +++ b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h @@ -1647,6 +1647,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/delta/Anycubic/Kossel/Configuration.h b/config/examples/delta/Anycubic/Kossel/Configuration.h index d24e028962..9eab61f815 100644 --- a/config/examples/delta/Anycubic/Kossel/Configuration.h +++ b/config/examples/delta/Anycubic/Kossel/Configuration.h @@ -1648,6 +1648,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/delta/Anycubic/Predator/Configuration.h b/config/examples/delta/Anycubic/Predator/Configuration.h index 37d9f20cde..e0589a697c 100644 --- a/config/examples/delta/Anycubic/Predator/Configuration.h +++ b/config/examples/delta/Anycubic/Predator/Configuration.h @@ -1597,6 +1597,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/delta/Dreammaker/Overlord/Configuration.h b/config/examples/delta/Dreammaker/Overlord/Configuration.h index a96d005594..c7c9465ee9 100644 --- a/config/examples/delta/Dreammaker/Overlord/Configuration.h +++ b/config/examples/delta/Dreammaker/Overlord/Configuration.h @@ -1595,6 +1595,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h index a48b08dc1d..57290886dc 100644 --- a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h +++ b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h @@ -1607,6 +1607,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h index 8d51e29a45..d2c793d4c9 100644 --- a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h +++ b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h @@ -1598,6 +1598,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h b/config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h index f2229836bd..4693a1f24e 100644 --- a/config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h +++ b/config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h @@ -1595,6 +1595,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/delta/FLSUN/QQ-S/Configuration.h b/config/examples/delta/FLSUN/QQ-S/Configuration.h index cfb9425fe8..f6053b5883 100644 --- a/config/examples/delta/FLSUN/QQ-S/Configuration.h +++ b/config/examples/delta/FLSUN/QQ-S/Configuration.h @@ -1597,6 +1597,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/delta/FLSUN/QQS-Pro/Configuration.h b/config/examples/delta/FLSUN/QQS-Pro/Configuration.h index 8461e79a01..6e7b1c8661 100644 --- a/config/examples/delta/FLSUN/QQS-Pro/Configuration.h +++ b/config/examples/delta/FLSUN/QQS-Pro/Configuration.h @@ -1597,6 +1597,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration.h index 8471344072..9eb0271215 100644 --- a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h +++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration.h @@ -1600,6 +1600,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/delta/FLSUN/kossel/Configuration.h b/config/examples/delta/FLSUN/kossel/Configuration.h index a4476a3c7b..4412f2b971 100644 --- a/config/examples/delta/FLSUN/kossel/Configuration.h +++ b/config/examples/delta/FLSUN/kossel/Configuration.h @@ -1599,6 +1599,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration.h b/config/examples/delta/FLSUN/kossel_mini/Configuration.h index f2ffc3fa96..68ea898a50 100644 --- a/config/examples/delta/FLSUN/kossel_mini/Configuration.h +++ b/config/examples/delta/FLSUN/kossel_mini/Configuration.h @@ -1599,6 +1599,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/delta/Geeetech/G2/Configuration.h b/config/examples/delta/Geeetech/G2/Configuration.h index 4c0b0ebc1b..7ce055431c 100644 --- a/config/examples/delta/Geeetech/G2/Configuration.h +++ b/config/examples/delta/Geeetech/G2/Configuration.h @@ -1595,6 +1595,8 @@ #define UBL_Z_RAISE_WHEN_OFF_MESH 0 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/delta/Geeetech/G2Pro/Configuration.h b/config/examples/delta/Geeetech/G2Pro/Configuration.h index 93cb540bbc..771041228a 100644 --- a/config/examples/delta/Geeetech/G2Pro/Configuration.h +++ b/config/examples/delta/Geeetech/G2Pro/Configuration.h @@ -1595,6 +1595,8 @@ #define UBL_Z_RAISE_WHEN_OFF_MESH 0 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/delta/Geeetech/G2S/Configuration.h b/config/examples/delta/Geeetech/G2S/Configuration.h index 1782669004..24437b4d22 100644 --- a/config/examples/delta/Geeetech/G2S/Configuration.h +++ b/config/examples/delta/Geeetech/G2S/Configuration.h @@ -1595,6 +1595,8 @@ #define UBL_Z_RAISE_WHEN_OFF_MESH 0 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/delta/Geeetech/G2SPro/Configuration.h b/config/examples/delta/Geeetech/G2SPro/Configuration.h index 78438a7755..496d3a9edc 100644 --- a/config/examples/delta/Geeetech/G2SPro/Configuration.h +++ b/config/examples/delta/Geeetech/G2SPro/Configuration.h @@ -1595,6 +1595,8 @@ #define UBL_Z_RAISE_WHEN_OFF_MESH 0 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration.h b/config/examples/delta/Geeetech/Rostock 301/Configuration.h index 04a3a839cd..2dc3094b80 100644 --- a/config/examples/delta/Geeetech/Rostock 301/Configuration.h +++ b/config/examples/delta/Geeetech/Rostock 301/Configuration.h @@ -1597,6 +1597,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/delta/Hatchbox_Alpha/Configuration.h b/config/examples/delta/Hatchbox_Alpha/Configuration.h index 32406d886f..fccfd3ea67 100644 --- a/config/examples/delta/Hatchbox_Alpha/Configuration.h +++ b/config/examples/delta/Hatchbox_Alpha/Configuration.h @@ -1602,6 +1602,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/delta/MKS/SBASE/Configuration.h b/config/examples/delta/MKS/SBASE/Configuration.h index 56bef96bf2..1bdb1c9034 100644 --- a/config/examples/delta/MKS/SBASE/Configuration.h +++ b/config/examples/delta/MKS/SBASE/Configuration.h @@ -1597,6 +1597,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/delta/Malyan M300/Configuration.h b/config/examples/delta/Malyan M300/Configuration.h index bc20b9ea69..30b20bf490 100644 --- a/config/examples/delta/Malyan M300/Configuration.h +++ b/config/examples/delta/Malyan M300/Configuration.h @@ -1562,6 +1562,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/delta/Tevo Little Monster/Configuration.h b/config/examples/delta/Tevo Little Monster/Configuration.h index f277115db9..8ccf5941fc 100644 --- a/config/examples/delta/Tevo Little Monster/Configuration.h +++ b/config/examples/delta/Tevo Little Monster/Configuration.h @@ -1598,6 +1598,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/delta/generic/Configuration.h b/config/examples/delta/generic/Configuration.h index f89b504f14..d75f80711b 100644 --- a/config/examples/delta/generic/Configuration.h +++ b/config/examples/delta/generic/Configuration.h @@ -1597,6 +1597,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/delta/kossel_clear/Configuration.h b/config/examples/delta/kossel_clear/Configuration.h index 8244dd1d9d..b12b328b9a 100644 --- a/config/examples/delta/kossel_clear/Configuration.h +++ b/config/examples/delta/kossel_clear/Configuration.h @@ -1596,6 +1596,8 @@ #define UBL_Z_RAISE_WHEN_OFF_MESH 0 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/delta/kossel_mini/Configuration.h b/config/examples/delta/kossel_mini/Configuration.h index 0d736f681d..5701a15f7d 100644 --- a/config/examples/delta/kossel_mini/Configuration.h +++ b/config/examples/delta/kossel_mini/Configuration.h @@ -1599,6 +1599,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/delta/kossel_pro/Configuration.h b/config/examples/delta/kossel_pro/Configuration.h index dbbd49bb26..603773205e 100644 --- a/config/examples/delta/kossel_pro/Configuration.h +++ b/config/examples/delta/kossel_pro/Configuration.h @@ -1618,6 +1618,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/delta/kossel_xl/Configuration.h b/config/examples/delta/kossel_xl/Configuration.h index 04e2aaa0cf..145fb0dcc1 100644 --- a/config/examples/delta/kossel_xl/Configuration.h +++ b/config/examples/delta/kossel_xl/Configuration.h @@ -1602,6 +1602,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/gCreate/gMax1.5+/Configuration.h b/config/examples/gCreate/gMax1.5+/Configuration.h index 6e88122639..54b425d4d5 100644 --- a/config/examples/gCreate/gMax1.5+/Configuration.h +++ b/config/examples/gCreate/gMax1.5+/Configuration.h @@ -1505,6 +1505,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/makibox/Configuration.h b/config/examples/makibox/Configuration.h index c238b9421d..a1069cd485 100644 --- a/config/examples/makibox/Configuration.h +++ b/config/examples/makibox/Configuration.h @@ -1500,6 +1500,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== diff --git a/config/examples/tvrrug/Round2/Configuration.h b/config/examples/tvrrug/Round2/Configuration.h index cc5a0c82df..a760f0ada6 100644 --- a/config/examples/tvrrug/Round2/Configuration.h +++ b/config/examples/tvrrug/Round2/Configuration.h @@ -1504,6 +1504,8 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. + //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #elif ENABLED(MESH_BED_LEVELING) //===========================================================================