diff --git a/config/default/Configuration_adv.h b/config/default/Configuration_adv.h index ff69ec99ec..e38d04a30d 100644 --- a/config/default/Configuration_adv.h +++ b/config/default/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h index 4ce36c744c..0c2c71ec7a 100644 --- a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h +++ b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h index 68916bf18a..27ea55ea53 100644 --- a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h +++ b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h index 0110e77516..af2db6ec96 100644 --- a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h +++ b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h index d94e52fc44..25c12c01cc 100644 --- a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h +++ b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h @@ -1630,6 +1630,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Alfawise/U20/Configuration_adv.h b/config/examples/Alfawise/U20/Configuration_adv.h index f6f0f94b3c..81c3de1415 100644 --- a/config/examples/Alfawise/U20/Configuration_adv.h +++ b/config/examples/Alfawise/U20/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/AliExpress/UM2pExt/Configuration_adv.h b/config/examples/AliExpress/UM2pExt/Configuration_adv.h index a5783c4e88..9238a31cec 100644 --- a/config/examples/AliExpress/UM2pExt/Configuration_adv.h +++ b/config/examples/AliExpress/UM2pExt/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Anet/A2/Configuration_adv.h b/config/examples/Anet/A2/Configuration_adv.h index b66fc0d085..957c5156ff 100644 --- a/config/examples/Anet/A2/Configuration_adv.h +++ b/config/examples/Anet/A2/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Anet/A2plus/Configuration_adv.h b/config/examples/Anet/A2plus/Configuration_adv.h index b66fc0d085..957c5156ff 100644 --- a/config/examples/Anet/A2plus/Configuration_adv.h +++ b/config/examples/Anet/A2plus/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Anet/A6/Configuration_adv.h b/config/examples/Anet/A6/Configuration_adv.h index be91df4b93..e5b0820aa6 100644 --- a/config/examples/Anet/A6/Configuration_adv.h +++ b/config/examples/Anet/A6/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Anet/A8/Configuration_adv.h b/config/examples/Anet/A8/Configuration_adv.h index 2cf62b2b63..02d74a3b42 100644 --- a/config/examples/Anet/A8/Configuration_adv.h +++ b/config/examples/Anet/A8/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Anet/A8plus/Configuration_adv.h b/config/examples/Anet/A8plus/Configuration_adv.h index 9518d2d56b..92eeab14f4 100644 --- a/config/examples/Anet/A8plus/Configuration_adv.h +++ b/config/examples/Anet/A8plus/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Anet/A9/Configuration_adv.h b/config/examples/Anet/A9/Configuration_adv.h index 2dd2389e90..1b12873eb8 100644 --- a/config/examples/Anet/A9/Configuration_adv.h +++ b/config/examples/Anet/A9/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Anet/E10/Configuration_adv.h b/config/examples/Anet/E10/Configuration_adv.h index 6f8bac428c..68e83e2dfc 100644 --- a/config/examples/Anet/E10/Configuration_adv.h +++ b/config/examples/Anet/E10/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h b/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h index 44d4f18cec..d44799c45d 100644 --- a/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h +++ b/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Anet/E16/Stock/Configuration_adv.h b/config/examples/Anet/E16/Stock/Configuration_adv.h index 7662504479..e4f4b34274 100644 --- a/config/examples/Anet/E16/Stock/Configuration_adv.h +++ b/config/examples/Anet/E16/Stock/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Anet/ET4+/Configuration_adv.h b/config/examples/Anet/ET4+/Configuration_adv.h index 680b81a544..62d4e9d0c6 100644 --- a/config/examples/Anet/ET4+/Configuration_adv.h +++ b/config/examples/Anet/ET4+/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Anet/ET4-Pro/Configuration_adv.h b/config/examples/Anet/ET4-Pro/Configuration_adv.h index 680b81a544..62d4e9d0c6 100644 --- a/config/examples/Anet/ET4-Pro/Configuration_adv.h +++ b/config/examples/Anet/ET4-Pro/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Anet/ET4/Configuration_adv.h b/config/examples/Anet/ET4/Configuration_adv.h index 34e7b18cd2..0d34525af0 100644 --- a/config/examples/Anet/ET4/Configuration_adv.h +++ b/config/examples/Anet/ET4/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Anet/ET4X/Configuration_adv.h b/config/examples/Anet/ET4X/Configuration_adv.h index 34e7b18cd2..0d34525af0 100644 --- a/config/examples/Anet/ET4X/Configuration_adv.h +++ b/config/examples/Anet/ET4X/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Anet/ET5-Pro/Configuration_adv.h b/config/examples/Anet/ET5-Pro/Configuration_adv.h index 764505e9f3..59f9dc698a 100644 --- a/config/examples/Anet/ET5-Pro/Configuration_adv.h +++ b/config/examples/Anet/ET5-Pro/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Anet/ET5/Configuration_adv.h b/config/examples/Anet/ET5/Configuration_adv.h index 764505e9f3..59f9dc698a 100644 --- a/config/examples/Anet/ET5/Configuration_adv.h +++ b/config/examples/Anet/ET5/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Anet/ET5X/Configuration_adv.h b/config/examples/Anet/ET5X/Configuration_adv.h index 764505e9f3..59f9dc698a 100644 --- a/config/examples/Anet/ET5X/Configuration_adv.h +++ b/config/examples/Anet/ET5X/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/AnyCubic/Chiron/Configuration_adv.h b/config/examples/AnyCubic/Chiron/Configuration_adv.h index 45c2c56f98..7e934d91f1 100644 --- a/config/examples/AnyCubic/Chiron/Configuration_adv.h +++ b/config/examples/AnyCubic/Chiron/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h index ac0d535e88..7d0dbd9bd2 100644 --- a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h +++ b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h index 8baeee2a6f..4cccd7e70c 100644 --- a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h +++ b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h index 01cc59e353..c0a0e45fba 100644 --- a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h +++ b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/AnyCubic/i3 Mega/Configuration_adv.h b/config/examples/AnyCubic/i3 Mega/Configuration_adv.h index 8edd3be43b..edd698d1cf 100644 --- a/config/examples/AnyCubic/i3 Mega/Configuration_adv.h +++ b/config/examples/AnyCubic/i3 Mega/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/AnyCubic/i3/Configuration_adv.h b/config/examples/AnyCubic/i3/Configuration_adv.h index fc9a04e8a3..55f0b1f6c8 100644 --- a/config/examples/AnyCubic/i3/Configuration_adv.h +++ b/config/examples/AnyCubic/i3/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/ArmEd/Configuration_adv.h b/config/examples/ArmEd/Configuration_adv.h index 0406589e18..b245d983ab 100644 --- a/config/examples/ArmEd/Configuration_adv.h +++ b/config/examples/ArmEd/Configuration_adv.h @@ -1625,6 +1625,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Artillery/Genius Pro/Configuration_adv.h b/config/examples/Artillery/Genius Pro/Configuration_adv.h index ea73f9ec67..b05b45a3e4 100644 --- a/config/examples/Artillery/Genius Pro/Configuration_adv.h +++ b/config/examples/Artillery/Genius Pro/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Artillery/Genius/BLTouch/Configuration_adv.h b/config/examples/Artillery/Genius/BLTouch/Configuration_adv.h index ebef7a6b8d..805bfc66d3 100644 --- a/config/examples/Artillery/Genius/BLTouch/Configuration_adv.h +++ b/config/examples/Artillery/Genius/BLTouch/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Artillery/Genius/V1/Configuration_adv.h b/config/examples/Artillery/Genius/V1/Configuration_adv.h index eb0bfce478..ec9e3fd805 100644 --- a/config/examples/Artillery/Genius/V1/Configuration_adv.h +++ b/config/examples/Artillery/Genius/V1/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Artillery/Hornet/Configuration_adv.h b/config/examples/Artillery/Hornet/Configuration_adv.h index 871d37f20f..fdf69614a8 100644 --- a/config/examples/Artillery/Hornet/Configuration_adv.h +++ b/config/examples/Artillery/Hornet/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h b/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h index c9335de4a1..fc575c84fe 100644 --- a/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h +++ b/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h b/config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h index eb0bfce478..ec9e3fd805 100644 --- a/config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h +++ b/config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Artillery/Sidewinder X2/Configuration_adv.h b/config/examples/Artillery/Sidewinder X2/Configuration_adv.h index 569c15f2ab..9a745e21ea 100644 --- a/config/examples/Artillery/Sidewinder X2/Configuration_adv.h +++ b/config/examples/Artillery/Sidewinder X2/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Azteeg/X5GT/Configuration_adv.h b/config/examples/Azteeg/X5GT/Configuration_adv.h index ff69ec99ec..e38d04a30d 100644 --- a/config/examples/Azteeg/X5GT/Configuration_adv.h +++ b/config/examples/Azteeg/X5GT/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h index 08cca4713f..2db9cd1900 100644 --- a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/BIBO/TouchX/default/Configuration_adv.h b/config/examples/BIBO/TouchX/default/Configuration_adv.h index e53a35ec02..f9ef4d998e 100644 --- a/config/examples/BIBO/TouchX/default/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/default/Configuration_adv.h @@ -1614,6 +1614,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/BIQU/B1 - SKR 1.4/Configuration_adv.h b/config/examples/BIQU/B1 - SKR 1.4/Configuration_adv.h index 7dc1fa8d0e..3929d00c21 100644 --- a/config/examples/BIQU/B1 - SKR 1.4/Configuration_adv.h +++ b/config/examples/BIQU/B1 - SKR 1.4/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/BIQU/B1 - SKR 2/Configuration_adv.h b/config/examples/BIQU/B1 - SKR 2/Configuration_adv.h index 054364093f..6d0670d2ce 100644 --- a/config/examples/BIQU/B1 - SKR 2/Configuration_adv.h +++ b/config/examples/BIQU/B1 - SKR 2/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/BIQU/B1 SE Plus/Configuration_adv.h b/config/examples/BIQU/B1 SE Plus/Configuration_adv.h index 4d7a170be7..fb8dae4a6c 100644 --- a/config/examples/BIQU/B1 SE Plus/Configuration_adv.h +++ b/config/examples/BIQU/B1 SE Plus/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/BIQU/BX/Configuration_adv.h b/config/examples/BIQU/BX/Configuration_adv.h index 120f0845a5..453f7d9340 100644 --- a/config/examples/BIQU/BX/Configuration_adv.h +++ b/config/examples/BIQU/BX/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/BQ/Hephestos/Configuration_adv.h b/config/examples/BQ/Hephestos/Configuration_adv.h index 92fd849cdd..85af225b65 100644 --- a/config/examples/BQ/Hephestos/Configuration_adv.h +++ b/config/examples/BQ/Hephestos/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/BQ/Hephestos_2/Configuration_adv.h b/config/examples/BQ/Hephestos_2/Configuration_adv.h index c3a444b2a7..e772269c13 100644 --- a/config/examples/BQ/Hephestos_2/Configuration_adv.h +++ b/config/examples/BQ/Hephestos_2/Configuration_adv.h @@ -1629,6 +1629,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/BQ/WITBOX/Configuration_adv.h b/config/examples/BQ/WITBOX/Configuration_adv.h index 92fd849cdd..85af225b65 100644 --- a/config/examples/BQ/WITBOX/Configuration_adv.h +++ b/config/examples/BQ/WITBOX/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/CTC/A13/Configuration_adv.h b/config/examples/CTC/A13/Configuration_adv.h index ce00a75db4..3fd429f6f5 100644 --- a/config/examples/CTC/A13/Configuration_adv.h +++ b/config/examples/CTC/A13/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Cartesio/Configuration_adv.h b/config/examples/Cartesio/Configuration_adv.h index 8b4de2d7cb..a84e4747de 100644 --- a/config/examples/Cartesio/Configuration_adv.h +++ b/config/examples/Cartesio/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index d51b4540db..17d31e7f66 100644 --- a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h index 89926aa37a..da0fad584c 100644 --- a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h index 684f9556b0..0ef1760c8e 100644 --- a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h index 6308269ff9..7b817f8eab 100644 --- a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h index d3de769d16..4e6abefc9d 100644 --- a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h index 6308269ff9..7b817f8eab 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration_adv.h b/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration_adv.h index fd8c0cbd68..6d60cef1b1 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Creality/CR-10 V2/Configuration_adv.h b/config/examples/Creality/CR-10 V2/Configuration_adv.h index cdbedf2b40..a609239f19 100644 --- a/config/examples/Creality/CR-10 V2/Configuration_adv.h +++ b/config/examples/Creality/CR-10 V2/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Creality/CR-10 V3/Configuration_adv.h b/config/examples/Creality/CR-10 V3/Configuration_adv.h index 07173ec4bd..17fcab67b4 100644 --- a/config/examples/Creality/CR-10 V3/Configuration_adv.h +++ b/config/examples/Creality/CR-10 V3/Configuration_adv.h @@ -1623,6 +1623,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index c332f532fe..cd46553374 100644 --- a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h index bb06a92f6e..43608df7b7 100644 --- a/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h index 21ed025413..d127ffc055 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 4fc05bd135..89065e87ba 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h index d225e2481d..9266acd9ca 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h index 0b591d384b..66e082cdea 100644 --- a/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Creality/CR-20 Pro/Configuration_adv.h b/config/examples/Creality/CR-20 Pro/Configuration_adv.h index 0df79927cc..5bd66a046e 100644 --- a/config/examples/Creality/CR-20 Pro/Configuration_adv.h +++ b/config/examples/Creality/CR-20 Pro/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Creality/CR-20/Configuration_adv.h b/config/examples/Creality/CR-20/Configuration_adv.h index abd4471b8d..ab4f0fbf1a 100644 --- a/config/examples/Creality/CR-20/Configuration_adv.h +++ b/config/examples/Creality/CR-20/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Creality/CR-30 PrintMill/Configuration_adv.h b/config/examples/Creality/CR-30 PrintMill/Configuration_adv.h index 9b8053c0eb..8ccd627683 100644 --- a/config/examples/Creality/CR-30 PrintMill/Configuration_adv.h +++ b/config/examples/Creality/CR-30 PrintMill/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Creality/CR-6 SE/Configuration_adv.h b/config/examples/Creality/CR-6 SE/Configuration_adv.h index 544eeb6b79..0bef7235b2 100644 --- a/config/examples/Creality/CR-6 SE/Configuration_adv.h +++ b/config/examples/Creality/CR-6 SE/Configuration_adv.h @@ -1622,6 +1622,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Creality/CR-8/Configuration_adv.h b/config/examples/Creality/CR-8/Configuration_adv.h index 583002204a..16b2e7ad21 100644 --- a/config/examples/Creality/CR-8/Configuration_adv.h +++ b/config/examples/Creality/CR-8/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration_adv.h b/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration_adv.h index c281faf91f..6c76ce5a1e 100644 --- a/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration_adv.h +++ b/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration_adv.h @@ -1622,6 +1622,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Creality/Ender-2/Configuration_adv.h b/config/examples/Creality/Ender-2/Configuration_adv.h index 205f2f41a4..4170a9df7a 100644 --- a/config/examples/Creality/Ender-2/Configuration_adv.h +++ b/config/examples/Creality/Ender-2/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Creality/Ender-3 Max/Configuration_adv.h b/config/examples/Creality/Ender-3 Max/Configuration_adv.h index 487d1a7511..f5dbbad375 100644 --- a/config/examples/Creality/Ender-3 Max/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Max/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h index 4b2b9357d1..1445d4c93f 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h index 653134a064..3121e5fbf4 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index 941fb3a03f..625a16ad29 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index cbcd92d8fc..2245d3b5f8 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h index e6766c744b..16aa1ac11b 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h index f67391b144..f52c450bb8 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h @@ -1622,6 +1622,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h index 3675ed1771..9a0e27bc46 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration_adv.h index 1296df6e07..569f009229 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration_adv.h @@ -1622,6 +1622,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration_adv.h index 05e7cba7bc..05a8e59aa2 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration_adv.h @@ -1622,6 +1622,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration_adv.h index f074da3aa6..60f8b243da 100644 --- a/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration_adv.h @@ -1622,6 +1622,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration_adv.h index 00d7860aab..5f41b7f929 100644 --- a/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration_adv.h @@ -1622,6 +1622,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h index 7541262964..351c816962 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h index 7c5b16d795..f20b8aed40 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h index de036776b1..3b0ac70e38 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h index dad6c80b2f..a97bde4f88 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h index de036776b1..3b0ac70e38 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h index 4d4e1bf1fd..de637aa0b6 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h index a9e2f1a14d..849c8bf590 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index cdc61d39d5..9037d2e778 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 810d4366eb..11fe848ea0 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h index 81f3efd397..78476103b5 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h index f5b93152e7..b7d4e05096 100644 --- a/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h index 1d6bb87b27..616d706cc3 100644 --- a/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h index 2f6731f5dd..a7491bffec 100644 --- a/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h index 5feec18afd..12f95b0991 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h index 5feec18afd..12f95b0991 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h index 5feec18afd..12f95b0991 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h index 5feec18afd..12f95b0991 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h index 751fc66f81..f84d762661 100644 --- a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h b/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h index faee6d8581..5ac6aabd74 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h b/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h index ff91de8049..1881c24e5f 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h index e0afe823a2..05b5a3aa2c 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration_adv.h b/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration_adv.h index 440480177f..a0a618a2ec 100644 --- a/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Creality/Ender-4/Configuration_adv.h b/config/examples/Creality/Ender-4/Configuration_adv.h index a3638f3b8e..73fa4f9aee 100644 --- a/config/examples/Creality/Ender-4/Configuration_adv.h +++ b/config/examples/Creality/Ender-4/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Creality/Ender-5 Plus/Configuration_adv.h b/config/examples/Creality/Ender-5 Plus/Configuration_adv.h index a59ad35e2e..30a789d223 100644 --- a/config/examples/Creality/Ender-5 Plus/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Plus/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h index 198a6da630..81811e5319 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index 27f1b37e48..89eed09c8a 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h index b2f641181a..476ce52f26 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h index 58fd6693f1..4bd7988f65 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h index 28656f1430..47d412c84c 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h index 882df70f0f..198eae9b05 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h index e6e766bea5..d1daf012c2 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h @@ -1625,6 +1625,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h index 198a6da630..81811e5319 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h index dba9dc8144..02f3e92705 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index cdc61d39d5..9037d2e778 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 44270bf5ae..0a8732f5a6 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h index e24b15353b..f25b2edbd0 100644 --- a/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h index f517f951ee..11c987bc1d 100644 --- a/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Creality/Ender-6/Configuration_adv.h b/config/examples/Creality/Ender-6/Configuration_adv.h index 8dfd79c278..a623c8545a 100644 --- a/config/examples/Creality/Ender-6/Configuration_adv.h +++ b/config/examples/Creality/Ender-6/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h index 8ea73a4fb0..af09b036dd 100644 --- a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h +++ b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Daycom/3DP-100/Configuration_adv.h b/config/examples/Daycom/3DP-100/Configuration_adv.h index c16e124503..e33943cc6a 100644 --- a/config/examples/Daycom/3DP-100/Configuration_adv.h +++ b/config/examples/Daycom/3DP-100/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h b/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h index 5d22d45e96..981e855bd5 100644 --- a/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h +++ b/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' #define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/EasyThreeD/ET4000PLUS/Configuration_adv.h b/config/examples/EasyThreeD/ET4000PLUS/Configuration_adv.h index 86054391f2..608b006c4a 100644 --- a/config/examples/EasyThreeD/ET4000PLUS/Configuration_adv.h +++ b/config/examples/EasyThreeD/ET4000PLUS/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Einstart-S/Configuration_adv.h b/config/examples/Einstart-S/Configuration_adv.h index 593d48e463..907f56abbe 100644 --- a/config/examples/Einstart-S/Configuration_adv.h +++ b/config/examples/Einstart-S/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Elegoo/Neptune 2/Configuration_adv.h b/config/examples/Elegoo/Neptune 2/Configuration_adv.h index bd131b36f7..baae10ca52 100644 --- a/config/examples/Elegoo/Neptune 2/Configuration_adv.h +++ b/config/examples/Elegoo/Neptune 2/Configuration_adv.h @@ -1610,6 +1610,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' #define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Eryone/Thinker SE/Configuration_adv.h b/config/examples/Eryone/Thinker SE/Configuration_adv.h index a38777f19d..54e53794a3 100644 --- a/config/examples/Eryone/Thinker SE/Configuration_adv.h +++ b/config/examples/Eryone/Thinker SE/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Eryone/Thinker V2/Configuration_adv.h b/config/examples/Eryone/Thinker V2/Configuration_adv.h index 894300521a..f599e2b5f9 100644 --- a/config/examples/Eryone/Thinker V2/Configuration_adv.h +++ b/config/examples/Eryone/Thinker V2/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/FYSETC/AIO_II/Configuration_adv.h b/config/examples/FYSETC/AIO_II/Configuration_adv.h index 9173b90823..8ffec0a045 100644 --- a/config/examples/FYSETC/AIO_II/Configuration_adv.h +++ b/config/examples/FYSETC/AIO_II/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/FYSETC/F6_13/Configuration_adv.h b/config/examples/FYSETC/F6_13/Configuration_adv.h index 1d394cfba2..7aa87f47b2 100644 --- a/config/examples/FYSETC/F6_13/Configuration_adv.h +++ b/config/examples/FYSETC/F6_13/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/FYSETC/S6/Configuration_adv.h b/config/examples/FYSETC/S6/Configuration_adv.h index 9a01e62ecf..0161260110 100644 --- a/config/examples/FYSETC/S6/Configuration_adv.h +++ b/config/examples/FYSETC/S6/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Felix/DUAL/Configuration_adv.h b/config/examples/Felix/DUAL/Configuration_adv.h index 4493f3246b..916021ee79 100644 --- a/config/examples/Felix/DUAL/Configuration_adv.h +++ b/config/examples/Felix/DUAL/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Felix/Single/Configuration_adv.h b/config/examples/Felix/Single/Configuration_adv.h index 4493f3246b..916021ee79 100644 --- a/config/examples/Felix/Single/Configuration_adv.h +++ b/config/examples/Felix/Single/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/FlashForge/Creator 2X/Configuration_adv.h b/config/examples/FlashForge/Creator 2X/Configuration_adv.h index 40cc5ecc5d..7b75c9e5e2 100644 --- a/config/examples/FlashForge/Creator 2X/Configuration_adv.h +++ b/config/examples/FlashForge/Creator 2X/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/FlashForge/CreatorPro/Configuration_adv.h b/config/examples/FlashForge/CreatorPro/Configuration_adv.h index d4fda275bc..1a2aadeb30 100644 --- a/config/examples/FlashForge/CreatorPro/Configuration_adv.h +++ b/config/examples/FlashForge/CreatorPro/Configuration_adv.h @@ -1620,6 +1620,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/FlyingBear/P902/Configuration_adv.h b/config/examples/FlyingBear/P902/Configuration_adv.h index 04ae978e84..f88fa4195f 100644 --- a/config/examples/FlyingBear/P902/Configuration_adv.h +++ b/config/examples/FlyingBear/P902/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/FlyingBear/P905H/Configuration_adv.h b/config/examples/FlyingBear/P905H/Configuration_adv.h index bd8e38f105..85c14fa4f4 100644 --- a/config/examples/FlyingBear/P905H/Configuration_adv.h +++ b/config/examples/FlyingBear/P905H/Configuration_adv.h @@ -1624,6 +1624,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/FoamCutter/Configuration_adv.h b/config/examples/FoamCutter/Configuration_adv.h index ff69ec99ec..e38d04a30d 100644 --- a/config/examples/FoamCutter/Configuration_adv.h +++ b/config/examples/FoamCutter/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/config/examples/FolgerTech/i3-2020/Configuration_adv.h index 1bff7f7c3b..2dd7939e7f 100644 --- a/config/examples/FolgerTech/i3-2020/Configuration_adv.h +++ b/config/examples/FolgerTech/i3-2020/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Formbot/Raptor/Configuration_adv.h b/config/examples/Formbot/Raptor/Configuration_adv.h index 813bfad36a..08f3049af4 100644 --- a/config/examples/Formbot/Raptor/Configuration_adv.h +++ b/config/examples/Formbot/Raptor/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h index f9fadcd391..fa8fc5fbf0 100644 --- a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h +++ b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Formbot/T_Rex_3/Configuration_adv.h b/config/examples/Formbot/T_Rex_3/Configuration_adv.h index 71541da022..53ba221dfa 100644 --- a/config/examples/Formbot/T_Rex_3/Configuration_adv.h +++ b/config/examples/Formbot/T_Rex_3/Configuration_adv.h @@ -1625,6 +1625,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Geeetech/A10/Configuration_adv.h b/config/examples/Geeetech/A10/Configuration_adv.h index cb8796a083..4ad34c7561 100644 --- a/config/examples/Geeetech/A10/Configuration_adv.h +++ b/config/examples/Geeetech/A10/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Geeetech/A10D/Configuration_adv.h b/config/examples/Geeetech/A10D/Configuration_adv.h index 3d24bca3b0..ef48ac7267 100644 --- a/config/examples/Geeetech/A10D/Configuration_adv.h +++ b/config/examples/Geeetech/A10D/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Geeetech/A10M/Stock LCD/Configuration_adv.h b/config/examples/Geeetech/A10M/Stock LCD/Configuration_adv.h index b5bdaa5f52..af0e642f77 100644 --- a/config/examples/Geeetech/A10M/Stock LCD/Configuration_adv.h +++ b/config/examples/Geeetech/A10M/Stock LCD/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration_adv.h b/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration_adv.h index b5bdaa5f52..af0e642f77 100644 --- a/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration_adv.h +++ b/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Geeetech/A10PRO/Configuration_adv.h b/config/examples/Geeetech/A10PRO/Configuration_adv.h index cb8796a083..4ad34c7561 100644 --- a/config/examples/Geeetech/A10PRO/Configuration_adv.h +++ b/config/examples/Geeetech/A10PRO/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Geeetech/A10T/Stock LCD/Configuration_adv.h b/config/examples/Geeetech/A10T/Stock LCD/Configuration_adv.h index b5bdaa5f52..af0e642f77 100644 --- a/config/examples/Geeetech/A10T/Stock LCD/Configuration_adv.h +++ b/config/examples/Geeetech/A10T/Stock LCD/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration_adv.h b/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration_adv.h index b5bdaa5f52..af0e642f77 100644 --- a/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration_adv.h +++ b/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Geeetech/A20/Configuration_adv.h b/config/examples/Geeetech/A20/Configuration_adv.h index 95be34be78..b8b21d7be2 100644 --- a/config/examples/Geeetech/A20/Configuration_adv.h +++ b/config/examples/Geeetech/A20/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Geeetech/A20M/Configuration_adv.h b/config/examples/Geeetech/A20M/Configuration_adv.h index 95be34be78..b8b21d7be2 100644 --- a/config/examples/Geeetech/A20M/Configuration_adv.h +++ b/config/examples/Geeetech/A20M/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Geeetech/A20T/Configuration_adv.h b/config/examples/Geeetech/A20T/Configuration_adv.h index 95be34be78..b8b21d7be2 100644 --- a/config/examples/Geeetech/A20T/Configuration_adv.h +++ b/config/examples/Geeetech/A20T/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Geeetech/A30/Configuration_adv.h b/config/examples/Geeetech/A30/Configuration_adv.h index 2a9462e8b1..9ecfc3a12b 100644 --- a/config/examples/Geeetech/A30/Configuration_adv.h +++ b/config/examples/Geeetech/A30/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Geeetech/A30M/Configuration_adv.h b/config/examples/Geeetech/A30M/Configuration_adv.h index 2a9462e8b1..9ecfc3a12b 100644 --- a/config/examples/Geeetech/A30M/Configuration_adv.h +++ b/config/examples/Geeetech/A30M/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Geeetech/A30T/Configuration_adv.h b/config/examples/Geeetech/A30T/Configuration_adv.h index 2a9462e8b1..9ecfc3a12b 100644 --- a/config/examples/Geeetech/A30T/Configuration_adv.h +++ b/config/examples/Geeetech/A30T/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Geeetech/D200/Configuration_adv.h b/config/examples/Geeetech/D200/Configuration_adv.h index fdacac2d0a..4e1742549b 100644 --- a/config/examples/Geeetech/D200/Configuration_adv.h +++ b/config/examples/Geeetech/D200/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Geeetech/Duplicator5/Configuration_adv.h b/config/examples/Geeetech/Duplicator5/Configuration_adv.h index 9a01e62ecf..0161260110 100644 --- a/config/examples/Geeetech/Duplicator5/Configuration_adv.h +++ b/config/examples/Geeetech/Duplicator5/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Geeetech/E180/Configuration_adv.h b/config/examples/Geeetech/E180/Configuration_adv.h index 2a9462e8b1..9ecfc3a12b 100644 --- a/config/examples/Geeetech/E180/Configuration_adv.h +++ b/config/examples/Geeetech/E180/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Geeetech/M201/Configuration_adv.h b/config/examples/Geeetech/M201/Configuration_adv.h index fdacac2d0a..4e1742549b 100644 --- a/config/examples/Geeetech/M201/Configuration_adv.h +++ b/config/examples/Geeetech/M201/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Geeetech/MeCreator2/Configuration_adv.h b/config/examples/Geeetech/MeCreator2/Configuration_adv.h index c489d37d87..35eaed2900 100644 --- a/config/examples/Geeetech/MeCreator2/Configuration_adv.h +++ b/config/examples/Geeetech/MeCreator2/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Geeetech/Me_creator/Configuration_adv.h b/config/examples/Geeetech/Me_creator/Configuration_adv.h index 9a01e62ecf..0161260110 100644 --- a/config/examples/Geeetech/Me_creator/Configuration_adv.h +++ b/config/examples/Geeetech/Me_creator/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Geeetech/Me_ducer/Configuration_adv.h b/config/examples/Geeetech/Me_ducer/Configuration_adv.h index 5188aed561..400435dc94 100644 --- a/config/examples/Geeetech/Me_ducer/Configuration_adv.h +++ b/config/examples/Geeetech/Me_ducer/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Geeetech/PI3A PRO/Configuration_adv.h b/config/examples/Geeetech/PI3A PRO/Configuration_adv.h index 534a9996d9..2cb7faf784 100644 --- a/config/examples/Geeetech/PI3A PRO/Configuration_adv.h +++ b/config/examples/Geeetech/PI3A PRO/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h index cb8796a083..4ad34c7561 100644 --- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h index cb8796a083..4ad34c7561 100644 --- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/HMS434/Configuration_adv.h b/config/examples/HMS434/Configuration_adv.h index 866fdbe350..ba91445a3f 100644 --- a/config/examples/HMS434/Configuration_adv.h +++ b/config/examples/HMS434/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Index/REV_03/Configuration_adv.h b/config/examples/Index/REV_03/Configuration_adv.h index c0234e0fbf..0ba2db1fcf 100644 --- a/config/examples/Index/REV_03/Configuration_adv.h +++ b/config/examples/Index/REV_03/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Infitary/i3-M508/Configuration_adv.h b/config/examples/Infitary/i3-M508/Configuration_adv.h index 8ee7cae0db..c0a17835da 100644 --- a/config/examples/Infitary/i3-M508/Configuration_adv.h +++ b/config/examples/Infitary/i3-M508/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h b/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h index 9c5382c11e..0723ed0a7c 100644 --- a/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h +++ b/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h @@ -1620,6 +1620,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/JGAurora/A1/Configuration_adv.h b/config/examples/JGAurora/A1/Configuration_adv.h index 76734ce7e0..d4cb09dccc 100644 --- a/config/examples/JGAurora/A1/Configuration_adv.h +++ b/config/examples/JGAurora/A1/Configuration_adv.h @@ -1626,6 +1626,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/JGAurora/A5/Configuration_adv.h b/config/examples/JGAurora/A5/Configuration_adv.h index a1c318b58a..d87fa6530e 100644 --- a/config/examples/JGAurora/A5/Configuration_adv.h +++ b/config/examples/JGAurora/A5/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/JGAurora/A5S/Configuration_adv.h b/config/examples/JGAurora/A5S/Configuration_adv.h index 76734ce7e0..d4cb09dccc 100644 --- a/config/examples/JGAurora/A5S/Configuration_adv.h +++ b/config/examples/JGAurora/A5S/Configuration_adv.h @@ -1626,6 +1626,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/JGAurora/Magic/Configuration_adv.h b/config/examples/JGAurora/Magic/Configuration_adv.h index 8ad508c038..4b5ddac91a 100644 --- a/config/examples/JGAurora/Magic/Configuration_adv.h +++ b/config/examples/JGAurora/Magic/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Kingroon/KP3/Configuration_adv.h b/config/examples/Kingroon/KP3/Configuration_adv.h index 63fcdd5945..9c5b68842e 100644 --- a/config/examples/Kingroon/KP3/Configuration_adv.h +++ b/config/examples/Kingroon/KP3/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Labists/ET4/Configuration_adv.h b/config/examples/Labists/ET4/Configuration_adv.h index 680b81a544..62d4e9d0c6 100644 --- a/config/examples/Labists/ET4/Configuration_adv.h +++ b/config/examples/Labists/ET4/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/LulzBot/TAZ4/Configuration_adv.h b/config/examples/LulzBot/TAZ4/Configuration_adv.h index e95bc5d5aa..368f0ab063 100644 --- a/config/examples/LulzBot/TAZ4/Configuration_adv.h +++ b/config/examples/LulzBot/TAZ4/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/MBot/Cube/Configuration_adv.h b/config/examples/MBot/Cube/Configuration_adv.h index 798f066b70..3262f31b6a 100644 --- a/config/examples/MBot/Cube/Configuration_adv.h +++ b/config/examples/MBot/Cube/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h b/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h index 80c9ef0546..fc947a832a 100644 --- a/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h +++ b/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' #define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/MakerParts/Configuration_adv.h b/config/examples/MakerParts/Configuration_adv.h index 02e66a4317..a4ba876e0f 100644 --- a/config/examples/MakerParts/Configuration_adv.h +++ b/config/examples/MakerParts/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Malyan/M150/Configuration_adv.h b/config/examples/Malyan/M150/Configuration_adv.h index 5f7dc31629..7963cfe857 100644 --- a/config/examples/Malyan/M150/Configuration_adv.h +++ b/config/examples/Malyan/M150/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Malyan/M200/Configuration_adv.h b/config/examples/Malyan/M200/Configuration_adv.h index b4f66ac79b..ce6bcd4a7f 100644 --- a/config/examples/Malyan/M200/Configuration_adv.h +++ b/config/examples/Malyan/M200/Configuration_adv.h @@ -1623,6 +1623,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/config/examples/Micromake/C1/enhanced/Configuration_adv.h index 5b3027a52b..4b98558173 100644 --- a/config/examples/Micromake/C1/enhanced/Configuration_adv.h +++ b/config/examples/Micromake/C1/enhanced/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Mks/Robin/Configuration_adv.h b/config/examples/Mks/Robin/Configuration_adv.h index ff69ec99ec..e38d04a30d 100644 --- a/config/examples/Mks/Robin/Configuration_adv.h +++ b/config/examples/Mks/Robin/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Mks/Sbase/Configuration_adv.h b/config/examples/Mks/Sbase/Configuration_adv.h index f5f73adb8a..3f3d1c285d 100644 --- a/config/examples/Mks/Sbase/Configuration_adv.h +++ b/config/examples/Mks/Sbase/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Modix/Big60/Configuration_adv.h b/config/examples/Modix/Big60/Configuration_adv.h index fdd68b3a5e..d8615007cf 100644 --- a/config/examples/Modix/Big60/Configuration_adv.h +++ b/config/examples/Modix/Big60/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Nextion/Configuration_adv.h b/config/examples/Nextion/Configuration_adv.h index 6c468b3e47..2be0830b06 100644 --- a/config/examples/Nextion/Configuration_adv.h +++ b/config/examples/Nextion/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Ortur 4/Configuration_adv.h b/config/examples/Ortur 4/Configuration_adv.h index 95a101592d..0a8484f277 100644 --- a/config/examples/Ortur 4/Configuration_adv.h +++ b/config/examples/Ortur 4/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Polargraph/Configuration_adv.h b/config/examples/Polargraph/Configuration_adv.h index dc898d191e..e6feff7dba 100644 --- a/config/examples/Polargraph/Configuration_adv.h +++ b/config/examples/Polargraph/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Prusa/MK3/Configuration_adv.h b/config/examples/Prusa/MK3/Configuration_adv.h index 5ed6e68188..adaebf8e55 100644 --- a/config/examples/Prusa/MK3/Configuration_adv.h +++ b/config/examples/Prusa/MK3/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h index 0f3e2e7d2b..614847da92 100644 --- a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h +++ b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Qidi/Qidi 1/Configuration_adv.h b/config/examples/Qidi/Qidi 1/Configuration_adv.h index 4417042ddf..c85b91c4f0 100644 --- a/config/examples/Qidi/Qidi 1/Configuration_adv.h +++ b/config/examples/Qidi/Qidi 1/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Raiscube/A8r/Configuration_adv.h b/config/examples/Raiscube/A8r/Configuration_adv.h index be91df4b93..e5b0820aa6 100644 --- a/config/examples/Raiscube/A8r/Configuration_adv.h +++ b/config/examples/Raiscube/A8r/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/RapideLite/RL200/Configuration_adv.h b/config/examples/RapideLite/RL200/Configuration_adv.h index b1c4ceffeb..214839a29f 100644 --- a/config/examples/RapideLite/RL200/Configuration_adv.h +++ b/config/examples/RapideLite/RL200/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Renkforce/RF100/Configuration_adv.h b/config/examples/Renkforce/RF100/Configuration_adv.h index e549483f08..5af74f42b1 100644 --- a/config/examples/Renkforce/RF100/Configuration_adv.h +++ b/config/examples/Renkforce/RF100/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Renkforce/RF100XL/Configuration_adv.h b/config/examples/Renkforce/RF100XL/Configuration_adv.h index e549483f08..5af74f42b1 100644 --- a/config/examples/Renkforce/RF100XL/Configuration_adv.h +++ b/config/examples/Renkforce/RF100XL/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Renkforce/RF100v2/Configuration_adv.h b/config/examples/Renkforce/RF100v2/Configuration_adv.h index e549483f08..5af74f42b1 100644 --- a/config/examples/Renkforce/RF100v2/Configuration_adv.h +++ b/config/examples/Renkforce/RF100v2/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/RigidBot/Configuration_adv.h b/config/examples/RigidBot/Configuration_adv.h index 3991f07dd1..da0e105c54 100644 --- a/config/examples/RigidBot/Configuration_adv.h +++ b/config/examples/RigidBot/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/SCARA/MP_SCARA/Configuration_adv.h b/config/examples/SCARA/MP_SCARA/Configuration_adv.h index 59c15e8ef6..cfa1c80763 100644 --- a/config/examples/SCARA/MP_SCARA/Configuration_adv.h +++ b/config/examples/SCARA/MP_SCARA/Configuration_adv.h @@ -1618,6 +1618,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/SCARA/Morgan/Configuration_adv.h b/config/examples/SCARA/Morgan/Configuration_adv.h index bb3e0abd19..9635d10bd5 100644 --- a/config/examples/SCARA/Morgan/Configuration_adv.h +++ b/config/examples/SCARA/Morgan/Configuration_adv.h @@ -1618,6 +1618,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h index b886e93a00..ad6cdcef97 100644 --- a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h +++ b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Sanguinololu/Configuration_adv.h b/config/examples/Sanguinololu/Configuration_adv.h index 710ddc6676..da23c1734a 100644 --- a/config/examples/Sanguinololu/Configuration_adv.h +++ b/config/examples/Sanguinololu/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Simulator/Configuration_adv.h b/config/examples/Simulator/Configuration_adv.h index 371dfe6e6f..1e53136bec 100644 --- a/config/examples/Simulator/Configuration_adv.h +++ b/config/examples/Simulator/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration_adv.h b/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration_adv.h index 352b95a6a8..3dee742cbb 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration_adv.h @@ -1625,6 +1625,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 2b5196662d..fb5ad73c90 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h b/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h index 9245c9683e..bafa6f1ab9 100644 --- a/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h b/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h index 509bdb8e0c..023ae98f15 100644 --- a/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Sunlu/S8/Configuration_adv.h b/config/examples/Sunlu/S8/Configuration_adv.h index fc4cbb6d7f..b1f4c8ec02 100644 --- a/config/examples/Sunlu/S8/Configuration_adv.h +++ b/config/examples/Sunlu/S8/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h b/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h index b07f1ad59b..d5a93ea2cf 100644 --- a/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h +++ b/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Tevo/Michelangelo/Configuration_adv.h b/config/examples/Tevo/Michelangelo/Configuration_adv.h index 5fae9b0a8c..59d8d4a029 100644 --- a/config/examples/Tevo/Michelangelo/Configuration_adv.h +++ b/config/examples/Tevo/Michelangelo/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Tevo/Nereus/Configuration_adv.h b/config/examples/Tevo/Nereus/Configuration_adv.h index a4cf9752fa..0bfaa9b13a 100644 --- a/config/examples/Tevo/Nereus/Configuration_adv.h +++ b/config/examples/Tevo/Nereus/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Tevo/Tarantula Pro/Configuration_adv.h b/config/examples/Tevo/Tarantula Pro/Configuration_adv.h index 1aae76893a..37c14f49e9 100644 --- a/config/examples/Tevo/Tarantula Pro/Configuration_adv.h +++ b/config/examples/Tevo/Tarantula Pro/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h index aac937797f..ceeba4553d 100644 --- a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h +++ b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h index aac937797f..ceeba4553d 100644 --- a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h +++ b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/TheBorg/Configuration_adv.h b/config/examples/TheBorg/Configuration_adv.h index 26ecdb6d24..a13169887f 100644 --- a/config/examples/TheBorg/Configuration_adv.h +++ b/config/examples/TheBorg/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/TinyBoy2/Configuration_adv.h b/config/examples/TinyBoy2/Configuration_adv.h index 0c93d37df0..c7243d83e8 100644 --- a/config/examples/TinyBoy2/Configuration_adv.h +++ b/config/examples/TinyBoy2/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Tronxy/X3A/Configuration_adv.h b/config/examples/Tronxy/X3A/Configuration_adv.h index 5592820081..56f24f3a5d 100644 --- a/config/examples/Tronxy/X3A/Configuration_adv.h +++ b/config/examples/Tronxy/X3A/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Tronxy/X5S-2E/Configuration_adv.h b/config/examples/Tronxy/X5S-2E/Configuration_adv.h index 6761b06d0d..430a57e863 100644 --- a/config/examples/Tronxy/X5S-2E/Configuration_adv.h +++ b/config/examples/Tronxy/X5S-2E/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Tronxy/X5SA-2E/Configuration_adv.h b/config/examples/Tronxy/X5SA-2E/Configuration_adv.h index e6fa1d3ff4..0dc9035ef0 100644 --- a/config/examples/Tronxy/X5SA-2E/Configuration_adv.h +++ b/config/examples/Tronxy/X5SA-2E/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Tronxy/X5SA/Configuration_adv.h b/config/examples/Tronxy/X5SA/Configuration_adv.h index de3489269e..a14bc8309b 100644 --- a/config/examples/Tronxy/X5SA/Configuration_adv.h +++ b/config/examples/Tronxy/X5SA/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Two Trees/BlueR Plus/Configuration_adv.h b/config/examples/Two Trees/BlueR Plus/Configuration_adv.h index ed3ed44b4d..a01043b781 100644 --- a/config/examples/Two Trees/BlueR Plus/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR Plus/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h b/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h index 0dccf0e27e..d88655206a 100644 --- a/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h b/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h index 0dccf0e27e..d88655206a 100644 --- a/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h b/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h index 0dccf0e27e..d88655206a 100644 --- a/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h index 6306cb6dc4..f24e03e223 100644 --- a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h +++ b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h @@ -1627,6 +1627,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h b/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h index 2f48b14098..3ba1845971 100644 --- a/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h +++ b/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/UltiMachine/Archim1/Configuration_adv.h b/config/examples/UltiMachine/Archim1/Configuration_adv.h index 43289496d7..bf8fc0c7ed 100644 --- a/config/examples/UltiMachine/Archim1/Configuration_adv.h +++ b/config/examples/UltiMachine/Archim1/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/UltiMachine/Archim2/Configuration_adv.h b/config/examples/UltiMachine/Archim2/Configuration_adv.h index c3d23e39e6..be1205067c 100644 --- a/config/examples/UltiMachine/Archim2/Configuration_adv.h +++ b/config/examples/UltiMachine/Archim2/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Ultimaker/Ultimaker 2/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker 2/Configuration_adv.h index 014392053a..0f9e35b654 100644 --- a/config/examples/Ultimaker/Ultimaker 2/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker 2/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h index 3ae8895016..60888763d5 100644 --- a/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration_adv.h index b772130cb5..572e003e13 100644 --- a/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' #define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/VORONDesign/Configuration_adv.h b/config/examples/VORONDesign/Configuration_adv.h index bf34476e43..07f8c7cb0c 100644 --- a/config/examples/VORONDesign/Configuration_adv.h +++ b/config/examples/VORONDesign/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Velleman/K8200/Configuration_adv.h b/config/examples/Velleman/K8200/Configuration_adv.h index 3eb444bb61..fe547bc6e9 100644 --- a/config/examples/Velleman/K8200/Configuration_adv.h +++ b/config/examples/Velleman/K8200/Configuration_adv.h @@ -1634,6 +1634,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h b/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h index 802b849b6d..29b47d8043 100644 --- a/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h +++ b/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Velleman/K8400/Single-head/Configuration_adv.h b/config/examples/Velleman/K8400/Single-head/Configuration_adv.h index 802b849b6d..29b47d8043 100644 --- a/config/examples/Velleman/K8400/Single-head/Configuration_adv.h +++ b/config/examples/Velleman/K8400/Single-head/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/WASP/PowerWASP/Configuration_adv.h b/config/examples/WASP/PowerWASP/Configuration_adv.h index e75c9ec956..86ded32b5e 100644 --- a/config/examples/WASP/PowerWASP/Configuration_adv.h +++ b/config/examples/WASP/PowerWASP/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h b/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h index d470aac7d3..bb1f0ae1d0 100644 --- a/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h index e6991814ba..32c3cd8a19 100644 --- a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h @@ -1623,6 +1623,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h index b2ab4667ba..f1cab0769d 100644 --- a/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h index 48dbfd60d4..2c5e8266b1 100644 --- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Wanhao/Duplicator i3 Plus/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 Plus/Configuration_adv.h index ff69ec99ec..e38d04a30d 100644 --- a/config/examples/Wanhao/Duplicator i3 Plus/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 Plus/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Weistek/wt150/Configuration_adv.h b/config/examples/Weistek/wt150/Configuration_adv.h index 37afc1c3e1..aac09f7517 100644 --- a/config/examples/Weistek/wt150/Configuration_adv.h +++ b/config/examples/Weistek/wt150/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Zonestar/P802M/Configuration_adv.h b/config/examples/Zonestar/P802M/Configuration_adv.h index 48635fea71..41814a03ba 100644 --- a/config/examples/Zonestar/P802M/Configuration_adv.h +++ b/config/examples/Zonestar/P802M/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h index 2568a0eba4..259d994a2e 100644 --- a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h +++ b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h index e9573b3ff2..f25e692073 100644 --- a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h @@ -1624,6 +1624,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h index 53721571f3..a4281e2e75 100644 --- a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h @@ -1623,6 +1623,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/delta/Anycubic/Predator/Configuration_adv.h b/config/examples/delta/Anycubic/Predator/Configuration_adv.h index f72401083e..a9176e67eb 100644 --- a/config/examples/delta/Anycubic/Predator/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Predator/Configuration_adv.h @@ -1624,6 +1624,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h index ddd1550679..69877f803f 100644 --- a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h +++ b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h @@ -1623,6 +1623,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h index ddd1550679..69877f803f 100644 --- a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h +++ b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h @@ -1623,6 +1623,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h index 338532825a..be0b4e836f 100644 --- a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h +++ b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h @@ -1623,6 +1623,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h b/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h index 8f81777adc..3a37430519 100644 --- a/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h +++ b/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h @@ -1623,6 +1623,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h b/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h index 5c82c53074..b9e3db3938 100644 --- a/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h +++ b/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h @@ -1624,6 +1624,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h index d9c4ff858a..909059fb19 100644 --- a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h +++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h @@ -1623,6 +1623,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/delta/FLSUN/kossel/Configuration_adv.h b/config/examples/delta/FLSUN/kossel/Configuration_adv.h index d9c4ff858a..909059fb19 100644 --- a/config/examples/delta/FLSUN/kossel/Configuration_adv.h +++ b/config/examples/delta/FLSUN/kossel/Configuration_adv.h @@ -1623,6 +1623,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h index fb925694ee..17a8eec975 100644 --- a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h +++ b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h @@ -1623,6 +1623,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/delta/Geeetech/G2/Configuration_adv.h b/config/examples/delta/Geeetech/G2/Configuration_adv.h index d15ea53ac7..5cd931449c 100644 --- a/config/examples/delta/Geeetech/G2/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2/Configuration_adv.h @@ -1623,6 +1623,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h b/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h index ae3c440971..4d10fbed9c 100644 --- a/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h @@ -1623,6 +1623,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/delta/Geeetech/G2S/Configuration_adv.h b/config/examples/delta/Geeetech/G2S/Configuration_adv.h index ae3c440971..4d10fbed9c 100644 --- a/config/examples/delta/Geeetech/G2S/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2S/Configuration_adv.h @@ -1623,6 +1623,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h b/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h index ae3c440971..4d10fbed9c 100644 --- a/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h @@ -1623,6 +1623,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h index 95a35570ce..f338ceae38 100644 --- a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h +++ b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h @@ -1623,6 +1623,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h b/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h index 6aa2a01f9b..1c0d1c0ca8 100644 --- a/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h +++ b/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h @@ -1623,6 +1623,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/delta/MKS/SBASE/Configuration_adv.h b/config/examples/delta/MKS/SBASE/Configuration_adv.h index fb3c992a1e..fad7f6cf90 100644 --- a/config/examples/delta/MKS/SBASE/Configuration_adv.h +++ b/config/examples/delta/MKS/SBASE/Configuration_adv.h @@ -1623,6 +1623,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/delta/Malyan M300/Configuration_adv.h b/config/examples/delta/Malyan M300/Configuration_adv.h index 7830b52699..7c9b481157 100644 --- a/config/examples/delta/Malyan M300/Configuration_adv.h +++ b/config/examples/delta/Malyan M300/Configuration_adv.h @@ -1623,6 +1623,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/delta/Tevo Little Monster/Configuration_adv.h b/config/examples/delta/Tevo Little Monster/Configuration_adv.h index 69932d6568..cc81904952 100644 --- a/config/examples/delta/Tevo Little Monster/Configuration_adv.h +++ b/config/examples/delta/Tevo Little Monster/Configuration_adv.h @@ -1623,6 +1623,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/delta/generic/Configuration_adv.h b/config/examples/delta/generic/Configuration_adv.h index fb925694ee..17a8eec975 100644 --- a/config/examples/delta/generic/Configuration_adv.h +++ b/config/examples/delta/generic/Configuration_adv.h @@ -1623,6 +1623,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/delta/kossel_clear/Configuration_adv.h b/config/examples/delta/kossel_clear/Configuration_adv.h index fdb6e0d10e..107130e5d6 100644 --- a/config/examples/delta/kossel_clear/Configuration_adv.h +++ b/config/examples/delta/kossel_clear/Configuration_adv.h @@ -1623,6 +1623,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/delta/kossel_xl/Configuration_adv.h b/config/examples/delta/kossel_xl/Configuration_adv.h index 0c806bf965..e1232226bf 100644 --- a/config/examples/delta/kossel_xl/Configuration_adv.h +++ b/config/examples/delta/kossel_xl/Configuration_adv.h @@ -1623,6 +1623,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/config/examples/gCreate/gMax1.5+/Configuration_adv.h index b903646dda..8791ddc3dd 100644 --- a/config/examples/gCreate/gMax1.5+/Configuration_adv.h +++ b/config/examples/gCreate/gMax1.5+/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration_adv.h b/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration_adv.h index e4aff480b3..2615ee5584 100644 --- a/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration_adv.h +++ b/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/makibox/Configuration_adv.h b/config/examples/makibox/Configuration_adv.h index 2b0b5f6770..5f65e104d3 100644 --- a/config/examples/makibox/Configuration_adv.h +++ b/config/examples/makibox/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): * diff --git a/config/examples/tvrrug/Round2/Configuration_adv.h b/config/examples/tvrrug/Round2/Configuration_adv.h index a001c28478..44a6287b87 100644 --- a/config/examples/tvrrug/Round2/Configuration_adv.h +++ b/config/examples/tvrrug/Round2/Configuration_adv.h @@ -1621,6 +1621,11 @@ // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER + #if ENABLED(BINARY_FILE_TRANSFER) + // Include extra facilities (e.g., 'M20 F') supporting firmware upload via BINARY_FILE_TRANSFER + //#define CUSTOM_FIRMWARE_UPLOAD + #endif + /** * Set this option to one of the following (or the board's defaults apply): *