mirror of
https://github.com/MarlinFirmware/Configurations.git
synced 2025-08-07 22:14:06 -06:00
🔧 Config @ section adjustments
This commit is contained in:
Scott Lahteine
parent
07f1136873
commit
72bf82247b
376 changed files with 5264 additions and 3760 deletions
|
|
@ -73,6 +73,8 @@
|
|||
#define MOTHERBOARD BOARD_RAMPS_CREALITY
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -943,7 +945,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -967,6 +969,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1153,15 +1164,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3475,6 +3477,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -82,6 +82,8 @@
|
|||
#define MOTHERBOARD BOARD_BTT_SKR_MINI_E3_V2_0
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -951,7 +953,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -975,6 +977,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1161,15 +1172,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3483,6 +3485,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -82,6 +82,8 @@
|
|||
#define MOTHERBOARD BOARD_BTT_SKR_MINI_E3_V3_0
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -951,7 +953,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -975,6 +977,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1161,15 +1172,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3483,6 +3485,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -82,6 +82,8 @@
|
|||
#define MOTHERBOARD BOARD_MELZI_CREALITY
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -952,7 +954,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -976,6 +978,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1162,15 +1173,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3484,6 +3486,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -73,6 +73,8 @@
|
|||
#define MOTHERBOARD BOARD_CCROBOT_MEEB_3DP
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -943,7 +945,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -967,6 +969,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1153,15 +1164,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3475,6 +3477,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -73,6 +73,8 @@
|
|||
#define MOTHERBOARD BOARD_RAMPS_CREALITY
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -943,7 +945,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -967,6 +969,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1153,15 +1164,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3490,6 +3492,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -73,6 +73,8 @@
|
|||
#define MOTHERBOARD BOARD_BTT_SKR_MINI_E3_V1_2
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -943,7 +945,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -967,6 +969,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1153,15 +1164,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3478,6 +3480,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -73,6 +73,8 @@
|
|||
#define MOTHERBOARD BOARD_BTT_SKR_MINI_E3_V3_0
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -942,7 +944,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -966,6 +968,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1152,15 +1163,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3490,6 +3492,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -73,6 +73,8 @@
|
|||
#define MOTHERBOARD BOARD_RAMPS_CREALITY
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -943,7 +945,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -967,6 +969,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1153,15 +1164,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3478,6 +3480,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -73,6 +73,8 @@
|
|||
#define MOTHERBOARD BOARD_RAMPS_CREALITY
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -944,7 +946,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -968,6 +970,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1154,15 +1165,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3479,6 +3481,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -73,6 +73,8 @@
|
|||
#define MOTHERBOARD BOARD_CREALITY_V427
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -944,7 +946,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -968,6 +970,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1154,15 +1165,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3480,6 +3482,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -80,6 +80,8 @@
|
|||
#define MOTHERBOARD BOARD_RAMPS_CREALITY
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -952,7 +954,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -976,6 +978,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1162,15 +1173,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3504,6 +3506,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -80,6 +80,8 @@
|
|||
#define MOTHERBOARD BOARD_RAMPS_CREALITY
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -952,7 +954,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -976,6 +978,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1162,15 +1173,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3509,6 +3511,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -73,6 +73,8 @@
|
|||
#define MOTHERBOARD BOARD_BTT_SKR_MINI_E3_V2_0
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -942,7 +944,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -966,6 +968,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1152,15 +1163,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3486,6 +3488,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -73,6 +73,8 @@
|
|||
#define MOTHERBOARD BOARD_BTT_SKR_MINI_E3_V3_0
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -942,7 +944,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -966,6 +968,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1152,15 +1163,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3486,6 +3488,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -73,6 +73,8 @@
|
|||
#define MOTHERBOARD BOARD_MELZI_CREALITY
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -943,7 +945,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -967,6 +969,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1153,15 +1164,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3475,6 +3477,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -73,6 +73,8 @@
|
|||
#define MOTHERBOARD BOARD_RAMPS_CREALITY
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -943,7 +945,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -967,6 +969,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1153,15 +1164,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3475,6 +3477,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -73,6 +73,8 @@
|
|||
#define MOTHERBOARD BOARD_BTT_SKR_V1_4_TURBO
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -943,7 +945,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -967,6 +969,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1153,15 +1164,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3487,6 +3489,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -73,6 +73,8 @@
|
|||
#define MOTHERBOARD BOARD_BTT_SKR_V2_0_REV_B
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -943,7 +945,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -967,6 +969,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1153,15 +1164,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3487,6 +3489,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -73,6 +73,8 @@
|
|||
#define MOTHERBOARD BOARD_BTT_SKR_MINI_E3_V2_0
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -944,7 +946,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -968,6 +970,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1154,15 +1165,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3488,6 +3490,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -73,6 +73,8 @@
|
|||
#define MOTHERBOARD BOARD_BTT_SKR_MINI_E3_V3_0
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -944,7 +946,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -968,6 +970,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1154,15 +1165,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3488,6 +3490,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -73,6 +73,8 @@
|
|||
#define MOTHERBOARD BOARD_BTT_SKR_PRO_V1_2
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -943,7 +945,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -967,6 +969,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1153,15 +1164,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3475,6 +3477,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -73,6 +73,8 @@
|
|||
#define MOTHERBOARD BOARD_RAMPS_14_EFB
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -943,7 +945,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -967,6 +969,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1153,15 +1164,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3475,6 +3477,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -73,6 +73,8 @@
|
|||
#define MOTHERBOARD BOARD_RAMPS_CREALITY
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -943,7 +945,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -967,6 +969,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1153,15 +1164,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3476,6 +3478,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -73,6 +73,8 @@
|
|||
#define MOTHERBOARD BOARD_RAMPS_14_EFB
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -944,7 +946,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -968,6 +970,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1154,15 +1165,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3481,6 +3483,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -73,6 +73,8 @@
|
|||
#define MOTHERBOARD BOARD_MINITRONICS20
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -944,7 +946,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -968,6 +970,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1154,15 +1165,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3476,6 +3478,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -73,6 +73,8 @@
|
|||
#define MOTHERBOARD BOARD_RAMPS_14_EFB
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -944,7 +946,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -968,6 +970,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1154,15 +1165,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3481,6 +3483,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -73,6 +73,8 @@
|
|||
#define MOTHERBOARD BOARD_CREALITY_V4210
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -943,7 +945,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -967,6 +969,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1153,15 +1164,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3480,6 +3482,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -73,6 +73,8 @@
|
|||
#define MOTHERBOARD BOARD_CREALITY_V452
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -943,7 +945,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -967,6 +969,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1153,15 +1164,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3475,6 +3477,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -73,6 +73,8 @@
|
|||
#define MOTHERBOARD BOARD_RAMPS_ENDER_4
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -943,7 +945,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -967,6 +969,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1153,15 +1164,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3475,6 +3477,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -73,6 +73,8 @@
|
|||
#define MOTHERBOARD BOARD_CREALITY_ENDER2P_V24S4
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -943,7 +945,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -967,6 +969,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1153,15 +1164,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3475,6 +3477,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -73,6 +73,8 @@
|
|||
#define MOTHERBOARD BOARD_CREALITY_V423
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -943,7 +945,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -967,6 +969,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1153,15 +1164,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3478,6 +3480,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -73,6 +73,8 @@
|
|||
#define MOTHERBOARD BOARD_MELZI_CREALITY
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -944,7 +946,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -968,6 +970,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1154,15 +1165,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3476,6 +3478,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -74,6 +74,8 @@
|
|||
#define NO_AUTO_ASSIGN_WARNING
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -944,7 +946,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -968,6 +970,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1154,15 +1165,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3476,6 +3478,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -73,6 +73,8 @@
|
|||
#define MOTHERBOARD BOARD_CREALITY_V4
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -945,7 +947,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -969,6 +971,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1155,15 +1166,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3483,6 +3485,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -74,6 +74,8 @@
|
|||
#define NO_AUTO_ASSIGN_WARNING
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -944,7 +946,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -968,6 +970,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1154,15 +1165,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3479,6 +3481,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -73,6 +73,8 @@
|
|||
#define MOTHERBOARD BOARD_BTT_SKR_V1_4_TURBO
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -943,7 +945,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -967,6 +969,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1153,15 +1164,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3475,6 +3477,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -73,6 +73,8 @@
|
|||
#define MOTHERBOARD BOARD_BTT_SKR_MINI_E3_V1_0
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -943,7 +945,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -967,6 +969,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1153,15 +1164,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3475,6 +3477,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -73,6 +73,8 @@
|
|||
#define MOTHERBOARD BOARD_BTT_SKR_MINI_E3_V1_2
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -943,7 +945,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -967,6 +969,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1153,15 +1164,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3475,6 +3477,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -73,6 +73,8 @@
|
|||
#define MOTHERBOARD BOARD_BTT_SKR_MINI_E3_V2_0
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -943,7 +945,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -967,6 +969,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1153,15 +1164,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3475,6 +3477,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -73,6 +73,8 @@
|
|||
#define MOTHERBOARD BOARD_BTT_SKR_MINI_E3_V3_0
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -942,7 +944,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -966,6 +968,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1152,15 +1163,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3474,6 +3476,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -73,6 +73,8 @@
|
|||
#define MOTHERBOARD BOARD_CREALITY_CR4NTXXC10
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -944,7 +946,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -968,6 +970,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1154,15 +1165,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3479,6 +3481,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -73,6 +73,8 @@
|
|||
#define MOTHERBOARD BOARD_MELZI_CREALITY
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -944,7 +946,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -968,6 +970,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1154,15 +1165,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3476,6 +3478,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -73,6 +73,8 @@
|
|||
#define MOTHERBOARD BOARD_CREALITY_V422
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -943,7 +945,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -967,6 +969,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1153,15 +1164,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3478,6 +3480,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -73,6 +73,8 @@
|
|||
#define MOTHERBOARD BOARD_CREALITY_V427
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -944,7 +946,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -968,6 +970,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1154,15 +1165,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3477,6 +3479,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -73,6 +73,8 @@
|
|||
#define MOTHERBOARD BOARD_CREALITY_V427
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -944,7 +946,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -968,6 +970,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1154,15 +1165,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3479,6 +3481,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -73,6 +73,8 @@
|
|||
#define MOTHERBOARD BOARD_CREALITY_V24S1_301F4
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -944,7 +946,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -968,6 +970,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1154,15 +1165,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3476,6 +3478,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -73,6 +73,8 @@
|
|||
#define MOTHERBOARD BOARD_CREALITY_V24S1_301F4
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -944,7 +946,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -968,6 +970,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1154,15 +1165,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3476,6 +3478,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -73,6 +73,8 @@
|
|||
#define MOTHERBOARD BOARD_CREALITY_V24S1_301
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -943,7 +945,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -967,6 +969,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1153,15 +1164,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3481,6 +3483,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -73,6 +73,8 @@
|
|||
#define MOTHERBOARD BOARD_CREALITY_V24S1_301F4
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -943,7 +945,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -967,6 +969,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1153,15 +1164,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3488,6 +3490,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -73,6 +73,8 @@
|
|||
#define MOTHERBOARD BOARD_BTT_SKR_MINI_E3_V3_0
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -943,7 +945,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -967,6 +969,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1153,15 +1164,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3475,6 +3477,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -74,6 +74,8 @@
|
|||
#define NO_AUTO_ASSIGN_WARNING
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -944,7 +946,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -968,6 +970,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1154,15 +1165,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3476,6 +3478,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -73,6 +73,8 @@
|
|||
#define MOTHERBOARD BOARD_BTT_SKR_E3_TURBO
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -943,7 +945,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -967,6 +969,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1153,15 +1164,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3475,6 +3477,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -73,6 +73,8 @@
|
|||
#define MOTHERBOARD BOARD_BTT_SKR_E3_TURBO
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -943,7 +945,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -967,6 +969,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1153,15 +1164,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3475,6 +3477,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -74,6 +74,8 @@
|
|||
//#define NO_CONTROLLER_CUSTOM_WIRING_WARNING
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -944,7 +946,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -968,6 +970,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1154,15 +1165,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3476,6 +3478,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -74,6 +74,8 @@
|
|||
//#define NO_CONTROLLER_CUSTOM_WIRING_WARNING
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -944,7 +946,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -968,6 +970,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1154,15 +1165,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3476,6 +3478,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -73,6 +73,8 @@
|
|||
#define MOTHERBOARD BOARD_BTT_SKR_MINI_E3_V3_0
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -943,7 +945,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -967,6 +969,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1153,15 +1164,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3475,6 +3477,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -73,6 +73,8 @@
|
|||
#define MOTHERBOARD BOARD_BTT_SKR_MINI_E3_V3_0
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -943,7 +945,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -967,6 +969,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1153,15 +1164,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3475,6 +3477,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -73,6 +73,8 @@
|
|||
#define MOTHERBOARD BOARD_CREALITY_V4
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -943,7 +945,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -967,6 +969,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1153,15 +1164,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3475,6 +3477,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -73,6 +73,8 @@
|
|||
#define MOTHERBOARD BOARD_CREALITY_V4
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -943,7 +945,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -967,6 +969,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1153,15 +1164,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3475,6 +3477,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -73,6 +73,8 @@
|
|||
#define MOTHERBOARD BOARD_CREALITY_V427
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -943,7 +945,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -967,6 +969,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1153,15 +1164,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3475,6 +3477,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -73,6 +73,8 @@
|
|||
#define MOTHERBOARD BOARD_CREALITY_V427
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -943,7 +945,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -967,6 +969,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1153,15 +1164,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3475,6 +3477,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -73,6 +73,8 @@
|
|||
#define MOTHERBOARD BOARD_BTT_E3_RRF
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -942,7 +944,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -966,6 +968,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1152,15 +1163,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3474,6 +3476,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -73,6 +73,8 @@
|
|||
#define MOTHERBOARD BOARD_BTT_MANTA_E3_EZ_V1_0
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -940,7 +942,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -964,6 +966,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1150,15 +1161,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3472,6 +3474,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -73,6 +73,8 @@
|
|||
#define MOTHERBOARD BOARD_BTT_SKR_V1_4
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -944,7 +946,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -968,6 +970,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1154,15 +1165,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3476,6 +3478,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -73,6 +73,8 @@
|
|||
#define MOTHERBOARD BOARD_BTT_SKR_E3_TURBO
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -942,7 +944,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -966,6 +968,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1152,15 +1163,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3474,6 +3476,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -73,6 +73,8 @@
|
|||
#define MOTHERBOARD BOARD_BTT_SKR_E3_TURBO
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -942,7 +944,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -966,6 +968,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1152,15 +1163,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3474,6 +3476,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -73,6 +73,8 @@
|
|||
#define MOTHERBOARD BOARD_BTT_SKR_E3_TURBO
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -942,7 +944,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -966,6 +968,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1152,15 +1163,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3474,6 +3476,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -73,6 +73,8 @@
|
|||
#define MOTHERBOARD BOARD_BTT_SKR_E3_DIP
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -943,7 +945,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -967,6 +969,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1153,15 +1164,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3475,6 +3477,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -73,6 +73,8 @@
|
|||
#define MOTHERBOARD BOARD_BTT_SKR_MINI_E3_V1_0
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -942,7 +944,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -966,6 +968,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1152,15 +1163,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3474,6 +3476,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -73,6 +73,8 @@
|
|||
#define MOTHERBOARD BOARD_BTT_SKR_MINI_E3_V1_2
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -942,7 +944,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -966,6 +968,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1152,15 +1163,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3474,6 +3476,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -73,6 +73,8 @@
|
|||
#define MOTHERBOARD BOARD_BTT_SKR_MINI_E3_V2_0
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -942,7 +944,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -966,6 +968,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1152,15 +1163,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3474,6 +3476,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -73,6 +73,8 @@
|
|||
#define MOTHERBOARD BOARD_BTT_SKR_MINI_E3_V3_0
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -942,7 +944,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -966,6 +968,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1152,15 +1163,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3474,6 +3476,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -73,6 +73,8 @@
|
|||
#define MOTHERBOARD BOARD_CREALITY_CR4NTXXC10
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -944,7 +946,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -968,6 +970,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1154,15 +1165,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3479,6 +3481,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -73,6 +73,8 @@
|
|||
#define MOTHERBOARD BOARD_MELZI_CREALITY
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -944,7 +946,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -968,6 +970,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1154,15 +1165,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3476,6 +3478,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -73,6 +73,8 @@
|
|||
#define MOTHERBOARD BOARD_CREALITY_V4
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -950,7 +952,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -974,6 +976,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1160,15 +1171,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3485,6 +3487,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -73,6 +73,8 @@
|
|||
#define MOTHERBOARD BOARD_CREALITY_V427
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -944,7 +946,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -968,6 +970,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1154,15 +1165,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3479,6 +3481,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -73,6 +73,8 @@
|
|||
#define MOTHERBOARD BOARD_FYSETC_CHEETAH_V12
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -944,7 +946,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -968,6 +970,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1154,15 +1165,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3476,6 +3478,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -73,6 +73,8 @@
|
|||
#define MOTHERBOARD BOARD_FYSETC_CHEETAH_V12
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -944,7 +946,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -968,6 +970,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1154,15 +1165,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3476,6 +3478,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -73,6 +73,8 @@
|
|||
#define MOTHERBOARD BOARD_FYSETC_CHEETAH_V20
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -944,7 +946,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -968,6 +970,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1154,15 +1165,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3476,6 +3478,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -73,6 +73,8 @@
|
|||
#define MOTHERBOARD BOARD_FYSETC_CHEETAH
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -944,7 +946,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -968,6 +970,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1154,15 +1165,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3476,6 +3478,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -73,6 +73,8 @@
|
|||
#define MOTHERBOARD BOARD_FYSETC_CHEETAH
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -944,7 +946,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -968,6 +970,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1154,15 +1165,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3476,6 +3478,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -73,6 +73,8 @@
|
|||
#define MOTHERBOARD BOARD_CCROBOT_MEEB_3DP
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -949,7 +951,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -973,6 +975,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1159,15 +1170,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3481,6 +3483,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -73,6 +73,8 @@
|
|||
#define MOTHERBOARD BOARD_MKS_ROBIN_E3
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -942,7 +944,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -966,6 +968,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1152,15 +1163,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3474,6 +3476,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -73,6 +73,8 @@
|
|||
#define MOTHERBOARD BOARD_MKS_ROBIN_E3_V1_1
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -942,7 +944,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -966,6 +968,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1152,15 +1163,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3474,6 +3476,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -73,6 +73,8 @@
|
|||
#define MOTHERBOARD BOARD_MKS_ROBIN_E3P
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -944,7 +946,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -968,6 +970,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1154,15 +1165,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3476,6 +3478,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -73,6 +73,8 @@
|
|||
#define MOTHERBOARD BOARD_TH3D_EZBOARD_V2
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -944,7 +946,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -968,6 +970,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1154,15 +1165,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3479,6 +3481,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -73,6 +73,8 @@
|
|||
#define MOTHERBOARD BOARD_RAMPS_ENDER_4
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -943,7 +945,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -967,6 +969,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1153,15 +1164,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3475,6 +3477,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -73,6 +73,8 @@
|
|||
#define MOTHERBOARD BOARD_BTT_SKR_V3_0
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -943,7 +945,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -967,6 +969,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1153,15 +1164,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3475,6 +3477,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -76,6 +76,8 @@
|
|||
#define X_MAX_PIN 3 // Creality connects X_MAX to X_MIN(_PIN) motherboard connector
|
||||
#define Y_MAX_PIN 14 // Creality connects Y_MAX to Y_MIN(_PIN) motherboard connector
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -950,7 +952,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -974,6 +976,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1160,15 +1171,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3485,6 +3487,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -76,6 +76,8 @@
|
|||
#define X_MAX_PIN 3 // Creality connects X_MAX to X_MIN(_PIN) motherboard connector
|
||||
#define Y_MAX_PIN 14 // Creality connects Y_MAX to Y_MIN(_PIN) motherboard connector
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -950,7 +952,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -974,6 +976,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1160,15 +1171,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3485,6 +3487,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -76,6 +76,8 @@
|
|||
#define MOTHERBOARD BOARD_BTT_SKR_E3_TURBO
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -947,7 +949,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -971,6 +973,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1157,15 +1168,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3485,6 +3487,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -73,6 +73,8 @@
|
|||
#define MOTHERBOARD BOARD_BTT_SKR_MINI_E3_V1_2
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -942,7 +944,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -966,6 +968,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1152,15 +1163,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3474,6 +3476,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -73,6 +73,8 @@
|
|||
#define MOTHERBOARD BOARD_BTT_SKR_MINI_E3_V2_0
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -944,7 +946,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -968,6 +970,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1154,15 +1165,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3479,6 +3481,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -73,6 +73,8 @@
|
|||
#define MOTHERBOARD BOARD_BTT_SKR_MINI_E3_V3_0
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -943,7 +945,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -967,6 +969,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1153,15 +1164,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3475,6 +3477,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -73,6 +73,8 @@
|
|||
#define MOTHERBOARD BOARD_MELZI_CREALITY
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -944,7 +946,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -968,6 +970,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1154,15 +1165,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3476,6 +3478,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -76,6 +76,8 @@
|
|||
#define MOTHERBOARD BOARD_CREALITY_V4
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -951,7 +953,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -975,6 +977,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1161,15 +1172,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3500,6 +3502,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -73,6 +73,8 @@
|
|||
#define MOTHERBOARD BOARD_CREALITY_V427
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -944,7 +946,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -968,6 +970,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1154,15 +1165,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3479,6 +3481,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -89,6 +89,8 @@
|
|||
#define MOTHERBOARD BOARD_CREALITY_F401RE
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -960,7 +962,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -984,6 +986,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1170,15 +1181,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3530,6 +3532,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
|
|
@ -73,6 +73,8 @@
|
|||
#define MOTHERBOARD BOARD_BTT_SKR_E3_TURBO
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
|
@ -944,7 +946,7 @@
|
|||
//============================= Mechanical Settings =========================
|
||||
//===========================================================================
|
||||
|
||||
// @section machine
|
||||
// @section kinematics
|
||||
|
||||
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
|
||||
// either in the usual order or reversed
|
||||
|
|
@ -968,6 +970,15 @@
|
|||
// Enable for a belt style printer with endless "Z" motion
|
||||
//#define BELTPRINTER
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
// @section polargraph
|
||||
|
||||
// Enable for Polargraph Kinematics
|
||||
//#define POLARGRAPH
|
||||
#if ENABLED(POLARGRAPH)
|
||||
|
|
@ -1154,15 +1165,6 @@
|
|||
#define FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
|
||||
// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
|
||||
//#define FOAMCUTTER_XYUV
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -3476,6 +3478,8 @@
|
|||
* TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
|
||||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*
|
||||
* :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
|
||||
*/
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
|
|
|
|||
Some files were not shown because too many files have changed in this diff Show more
Loading…
Add table
Add a link
Reference in a new issue