From 706bf3aa0453276d3485bc4ef802e2a92be75e04 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Fri, 6 Oct 2023 15:59:27 -0500 Subject: [PATCH] =?UTF-8?q?=F0=9F=93=9D=20Some=20settings=20units?= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit --- config/default/Configuration_adv.h | 36 +++++++++---------- .../3DFabXYZ/Migbot/Configuration_adv.h | 36 +++++++++---------- .../ADIMLab/Gantry v1/Configuration_adv.h | 36 +++++++++---------- .../ADIMLab/Gantry v2/Configuration_adv.h | 36 +++++++++---------- .../Alfawise/U20-bltouch/Configuration_adv.h | 36 +++++++++---------- .../examples/Alfawise/U20/Configuration_adv.h | 36 +++++++++---------- .../AliExpress/CL-260/Configuration_adv.h | 36 +++++++++---------- .../AliExpress/UM2pExt/Configuration_adv.h | 36 +++++++++---------- config/examples/Anet/A2/Configuration_adv.h | 36 +++++++++---------- .../examples/Anet/A2plus/Configuration_adv.h | 36 +++++++++---------- config/examples/Anet/A6/Configuration_adv.h | 36 +++++++++---------- config/examples/Anet/A8/Configuration_adv.h | 36 +++++++++---------- .../examples/Anet/A8plus/Configuration_adv.h | 36 +++++++++---------- config/examples/Anet/A9/Configuration_adv.h | 36 +++++++++---------- config/examples/Anet/E10/Configuration_adv.h | 36 +++++++++---------- .../Anet/E16/BTT SKR 1.3/Configuration_adv.h | 36 +++++++++---------- .../Anet/E16/Stock/Configuration_adv.h | 36 +++++++++---------- config/examples/Anet/ET4+/Configuration_adv.h | 36 +++++++++---------- .../examples/Anet/ET4-Pro/Configuration_adv.h | 36 +++++++++---------- config/examples/Anet/ET4/Configuration_adv.h | 36 +++++++++---------- config/examples/Anet/ET4X/Configuration_adv.h | 36 +++++++++---------- .../examples/Anet/ET5-Pro/Configuration_adv.h | 36 +++++++++---------- config/examples/Anet/ET5/Configuration_adv.h | 36 +++++++++---------- config/examples/Anet/ET5X/Configuration_adv.h | 36 +++++++++---------- .../AnyCubic/Chiron/Configuration_adv.h | 36 +++++++++---------- .../Anycubic V1/Configuration_adv.h | 36 +++++++++---------- .../Mega Zero/Anycubic V1/Configuration_adv.h | 36 +++++++++---------- .../Configuration_adv.h | 36 +++++++++---------- .../AnyCubic/Vyper/Configuration_adv.h | 36 +++++++++---------- .../Trigorilla AVR/Configuration_adv.h | 36 +++++++++---------- .../Trigorilla Pro STM32/Configuration_adv.h | 36 +++++++++---------- .../examples/AnyCubic/i3/Configuration_adv.h | 36 +++++++++---------- config/examples/ArmEd/Configuration_adv.h | 36 +++++++++---------- .../Artillery/Genius Pro/Configuration_adv.h | 36 +++++++++---------- .../Genius/BLTouch/Configuration_adv.h | 36 +++++++++---------- .../Artillery/Genius/V1/Configuration_adv.h | 36 +++++++++---------- .../Artillery/Hornet/Configuration_adv.h | 36 +++++++++---------- .../0.9 BMG - E3D V6/Configuration_adv.h | 36 +++++++++---------- .../Sidewinder X1/V1/Configuration_adv.h | 36 +++++++++---------- .../Sidewinder X2/Configuration_adv.h | 36 +++++++++---------- .../examples/Azteeg/X5GT/Configuration_adv.h | 36 +++++++++---------- .../BIBO/TouchX/cyclops/Configuration_adv.h | 36 +++++++++---------- .../BIBO/TouchX/default/Configuration_adv.h | 36 +++++++++---------- .../BIQU/B1 SE Plus/Configuration_adv.h | 36 +++++++++---------- .../examples/BIQU/B1 SE/Configuration_adv.h | 36 +++++++++---------- config/examples/BIQU/B1/Configuration_adv.h | 36 +++++++++---------- config/examples/BIQU/BX/Configuration_adv.h | 36 +++++++++---------- .../examples/BIQU/Hurakan/Configuration_adv.h | 36 +++++++++---------- .../BIQU/Thunder Standard/Configuration_adv.h | 36 +++++++++---------- .../examples/BQ/Hephestos/Configuration_adv.h | 36 +++++++++---------- .../BQ/Hephestos_2/Configuration_adv.h | 36 +++++++++---------- config/examples/BQ/WITBOX/Configuration_adv.h | 36 +++++++++---------- config/examples/CTC/A13/Configuration_adv.h | 36 +++++++++---------- config/examples/CTC/Bizer/Configuration_adv.h | 36 +++++++++---------- .../no probe/Configuration_adv.h | 36 +++++++++---------- config/examples/Cartesio/Configuration_adv.h | 36 +++++++++---------- .../Copymaster3D/300/Configuration_adv.h | 36 +++++++++---------- .../Copymaster3D/400/Configuration_adv.h | 36 +++++++++---------- .../Copymaster3D/500/Configuration_adv.h | 36 +++++++++---------- .../Creality/CR-10 Max/Configuration_adv.h | 36 +++++++++---------- .../Configuration_adv.h | 36 +++++++++---------- .../Configuration_adv.h | 36 +++++++++---------- .../CR-10 Mini/CrealityV1/Configuration_adv.h | 36 +++++++++---------- .../CR-10 Mini/MEEB-3DP/Configuration_adv.h | 36 +++++++++---------- .../CR-10 S4/CrealityV1/Configuration_adv.h | 36 +++++++++---------- .../Configuration_adv.h | 36 +++++++++---------- .../Configuration_adv.h | 36 +++++++++---------- .../CR-10 S5/CrealityV1/Configuration_adv.h | 36 +++++++++---------- .../CrealityV2.2-BLTouch/Configuration_adv.h | 36 +++++++++---------- .../Creality/CR-10 V2/Configuration_adv.h | 36 +++++++++---------- .../Creality/CR-10 V3/Configuration_adv.h | 36 +++++++++---------- .../Configuration_adv.h | 36 +++++++++---------- .../Configuration_adv.h | 36 +++++++++---------- .../CR-10/CrealityV1/Configuration_adv.h | 36 +++++++++---------- .../Creality/CR-10S Pro/Configuration_adv.h | 36 +++++++++---------- .../Configuration_adv.h | 36 +++++++++---------- .../Configuration_adv.h | 36 +++++++++---------- .../Configuration_adv.h | 36 +++++++++---------- .../Configuration_adv.h | 36 +++++++++---------- .../CR-10S/CrealityV1/Configuration_adv.h | 36 +++++++++---------- .../Creality/CR-20 Pro/Configuration_adv.h | 36 +++++++++---------- .../Configuration_adv.h | 36 +++++++++---------- .../Creality/CR-20/Stock/Configuration_adv.h | 36 +++++++++---------- .../CR-30 PrintMill/Configuration_adv.h | 36 +++++++++---------- .../Creality/CR-6 SE/Configuration_adv.h | 36 +++++++++---------- .../Creality/CR-8/Configuration_adv.h | 36 +++++++++---------- .../CrealityV423/Configuration_adv.h | 36 +++++++++---------- .../Creality/Ender-2/Configuration_adv.h | 36 +++++++++---------- .../Ender-3 Max Neo/Configuration_adv.h | 36 +++++++++---------- .../Creality/Ender-3 Max/Configuration_adv.h | 36 +++++++++---------- .../Creality/Ender-3 Neo/Configuration_adv.h | 36 +++++++++---------- .../Configuration_adv.h | 36 +++++++++---------- .../Configuration_adv.h | 36 +++++++++---------- .../Configuration_adv.h | 36 +++++++++---------- .../Configuration_adv.h | 36 +++++++++---------- .../Configuration_adv.h | 36 +++++++++---------- .../CrealityV1/Configuration_adv.h | 36 +++++++++---------- .../CrealityV422/Configuration_adv.h | 36 +++++++++---------- .../CrealityV427/Configuration_adv.h | 36 +++++++++---------- .../Ender-3 S1 Plus/Configuration_adv.h | 36 +++++++++---------- .../Ender-3 S1 Pro/Configuration_adv.h | 36 +++++++++---------- .../Ender-3 S1/STM32F1/Configuration_adv.h | 36 +++++++++---------- .../Ender-3 S1/STM32F4/Configuration_adv.h | 36 +++++++++---------- .../Ender-3 V2 Neo/Configuration_adv.h | 36 +++++++++---------- .../CrealityUI/Configuration_adv.h | 36 +++++++++---------- .../MarlinUI/Configuration_adv.h | 36 +++++++++---------- .../CrealityUI/Configuration_adv.h | 36 +++++++++---------- .../MarlinUI/Configuration_adv.h | 36 +++++++++---------- .../CrealityUI/Configuration_adv.h | 36 +++++++++---------- .../CrealityV422/MarlinUI/Configuration_adv.h | 36 +++++++++---------- .../BigTreeTech E3 RRF/Configuration_adv.h | 36 +++++++++---------- .../Configuration_adv.h | 36 +++++++++---------- .../BigTreeTech SKR 1.4/Configuration_adv.h | 36 +++++++++---------- .../2-into-1 Hotend/Configuration_adv.h | 36 +++++++++---------- .../Dual Z/Configuration_adv.h | 36 +++++++++---------- .../Single Extruder/Configuration_adv.h | 36 +++++++++---------- .../Configuration_adv.h | 36 +++++++++---------- .../Configuration_adv.h | 36 +++++++++---------- .../Configuration_adv.h | 36 +++++++++---------- .../Configuration_adv.h | 36 +++++++++---------- .../Configuration_adv.h | 36 +++++++++---------- .../Ender-3/CrealityV1/Configuration_adv.h | 36 +++++++++---------- .../Ender-3/CrealityV422/Configuration_adv.h | 36 +++++++++---------- .../Ender-3/CrealityV427/Configuration_adv.h | 36 +++++++++---------- .../BLTouch/Configuration_adv.h | 36 +++++++++---------- .../base/Configuration_adv.h | 36 +++++++++---------- .../FYSETC Cheetah 2.0/Configuration_adv.h | 36 +++++++++---------- .../BLTouch/Configuration_adv.h | 36 +++++++++---------- .../FYSETC Cheetah/base/Configuration_adv.h | 36 +++++++++---------- .../Ender-3/MEEB-3DP/Configuration_adv.h | 36 +++++++++---------- .../MKS Robin E3/V1.0/Configuration_adv.h | 36 +++++++++---------- .../MKS Robin E3/V1.1/Configuration_adv.h | 36 +++++++++---------- .../Ender-3/MKS Robin E3P/Configuration_adv.h | 36 +++++++++---------- .../TH3D EZBoard Lite V2/Configuration_adv.h | 36 +++++++++---------- .../Creality/Ender-4/Configuration_adv.h | 36 +++++++++---------- .../BigTreeTech SKR 3/Configuration_adv.h | 36 +++++++++---------- .../Configuration_adv.h | 36 +++++++++---------- .../Configuration_adv.h | 36 +++++++++---------- .../Configuration_adv.h | 36 +++++++++---------- .../Configuration_adv.h | 36 +++++++++---------- .../Configuration_adv.h | 36 +++++++++---------- .../Configuration_adv.h | 36 +++++++++---------- .../CrealityV1/Configuration_adv.h | 36 +++++++++---------- .../CrealityV422/Configuration_adv.h | 36 +++++++++---------- .../CrealityV427/Configuration_adv.h | 36 +++++++++---------- .../Creality/Ender-5 S1/Configuration_adv.h | 36 +++++++++---------- .../Configuration_adv.h | 36 +++++++++---------- .../Configuration_adv.h | 36 +++++++++---------- .../Configuration_adv.h | 36 +++++++++---------- .../Configuration_adv.h | 36 +++++++++---------- .../Configuration_adv.h | 36 +++++++++---------- .../Ender-5/CrealityV1/Configuration_adv.h | 36 +++++++++---------- .../Ender-5/CrealityV427/Configuration_adv.h | 36 +++++++++---------- .../Creality/Ender-6/Configuration_adv.h | 36 +++++++++---------- .../Dagoma/Disco Ultimate/Configuration_adv.h | 36 +++++++++---------- .../Daycom/3DP-100/Configuration_adv.h | 36 +++++++++---------- .../Configuration_adv.h | 36 +++++++++---------- .../EasyThreeD/ET4000PLUS/Configuration_adv.h | 36 +++++++++---------- .../examples/Einstart-S/Configuration_adv.h | 36 +++++++++---------- .../Elegoo/Neptune 2/Configuration_adv.h | 36 +++++++++---------- .../Eryone/Thinker SE/Configuration_adv.h | 36 +++++++++---------- .../Eryone/Thinker V2/Configuration_adv.h | 36 +++++++++---------- .../FYSETC/AIO_II/Configuration_adv.h | 36 +++++++++---------- .../examples/FYSETC/F6_13/Configuration_adv.h | 36 +++++++++---------- config/examples/FYSETC/S6/Configuration_adv.h | 36 +++++++++---------- .../examples/Felix/DUAL/Configuration_adv.h | 36 +++++++++---------- .../examples/Felix/Single/Configuration_adv.h | 36 +++++++++---------- .../FlashForge/Creator 2X/Configuration_adv.h | 36 +++++++++---------- .../FlashForge/CreatorPro/Configuration_adv.h | 36 +++++++++---------- .../FlyingBear/P902/Configuration_adv.h | 36 +++++++++---------- .../FlyingBear/P905H/Configuration_adv.h | 36 +++++++++---------- .../FoamCutter/generic/Configuration_adv.h | 36 +++++++++---------- .../FoamCutter/rcKeith/Configuration_adv.h | 36 +++++++++---------- .../FolgerTech/FT-5 R2/Configuration_adv.h | 36 +++++++++---------- .../FolgerTech/i3-2020/Configuration_adv.h | 36 +++++++++---------- .../Formbot/Raptor/Configuration_adv.h | 36 +++++++++---------- .../Formbot/T_Rex_2+/Configuration_adv.h | 36 +++++++++---------- .../Formbot/T_Rex_3/Configuration_adv.h | 36 +++++++++---------- .../examples/Geeetech/A10/Configuration_adv.h | 36 +++++++++---------- .../Geeetech/A10D/Configuration_adv.h | 36 +++++++++---------- .../A10M/Stock LCD/Configuration_adv.h | 36 +++++++++---------- .../A10M/YHCB2004_V4.1/Configuration_adv.h | 36 +++++++++---------- .../Geeetech/A10PRO/Configuration_adv.h | 36 +++++++++---------- .../A10T/Stock LCD/Configuration_adv.h | 36 +++++++++---------- .../A10T/YHCB2004_V4.1/Configuration_adv.h | 36 +++++++++---------- .../examples/Geeetech/A20/Configuration_adv.h | 36 +++++++++---------- .../Geeetech/A20M/Configuration_adv.h | 36 +++++++++---------- .../Geeetech/A20T/Configuration_adv.h | 36 +++++++++---------- .../examples/Geeetech/A30/Configuration_adv.h | 36 +++++++++---------- .../Geeetech/A30M/Configuration_adv.h | 36 +++++++++---------- .../Geeetech/A30T/Configuration_adv.h | 36 +++++++++---------- .../Geeetech/D200/Configuration_adv.h | 36 +++++++++---------- .../Geeetech/Duplicator5/Configuration_adv.h | 36 +++++++++---------- .../Geeetech/E180/Configuration_adv.h | 36 +++++++++---------- .../Geeetech/GT2560/Configuration_adv.h | 36 +++++++++---------- .../I3_Pro_X-GT2560/Configuration_adv.h | 36 +++++++++---------- .../Geeetech/M201/Configuration_adv.h | 36 +++++++++---------- .../Geeetech/MeCreator2/Configuration_adv.h | 36 +++++++++---------- .../Geeetech/Me_creator/Configuration_adv.h | 36 +++++++++---------- .../Geeetech/Me_ducer/Configuration_adv.h | 36 +++++++++---------- .../Geeetech/PI3A PRO/Configuration_adv.h | 36 +++++++++---------- .../bltouch/Configuration_adv.h | 36 +++++++++---------- .../noprobe/Configuration_adv.h | 36 +++++++++---------- .../Prusa i3 Pro C/Configuration_adv.h | 36 +++++++++---------- .../Prusa i3 Pro W/Configuration_adv.h | 36 +++++++++---------- config/examples/HMS434/Configuration_adv.h | 36 +++++++++---------- .../Infitary/i3-M508/Configuration_adv.h | 36 +++++++++---------- .../FunmatHT 4988/Configuration_adv.h | 36 +++++++++---------- .../examples/JGAurora/A1/Configuration_adv.h | 36 +++++++++---------- .../examples/JGAurora/A3/Configuration_adv.h | 36 +++++++++---------- .../examples/JGAurora/A5/Configuration_adv.h | 36 +++++++++---------- .../examples/JGAurora/A5S/Configuration_adv.h | 36 +++++++++---------- .../JGAurora/Magic/Configuration_adv.h | 36 +++++++++---------- .../examples/Kingroon/KP3/Configuration_adv.h | 36 +++++++++---------- .../Kingroon/KP3S/Configuration_adv.h | 36 +++++++++---------- .../Kingroon/KP3S_Pro/Configuration_adv.h | 36 +++++++++---------- .../Kingroon/KP5L-DIY/Configuration_adv.h | 36 +++++++++---------- .../examples/Labists/ET4/Configuration_adv.h | 36 +++++++++---------- .../examples/Longer/LK5/Configuration_adv.h | 36 +++++++++---------- .../LulzBot/Mini2/Teensy/Configuration_adv.h | 36 +++++++++---------- .../examples/LulzBot/TAZ4/Configuration_adv.h | 36 +++++++++---------- config/examples/MBot/Cube/Configuration_adv.h | 36 +++++++++---------- .../MakerFarm/Pegasus 12/Configuration_adv.h | 36 +++++++++---------- .../examples/MakerParts/Configuration_adv.h | 36 +++++++++---------- .../Proforge2sDual/Configuration_adv.h | 36 +++++++++---------- .../examples/Malyan/M150/Configuration_adv.h | 36 +++++++++---------- .../examples/Malyan/M180/Configuration_adv.h | 36 +++++++++---------- .../examples/Malyan/M200/Configuration_adv.h | 36 +++++++++---------- .../Micromake/C1/basic/Configuration_adv.h | 36 +++++++++---------- .../Micromake/C1/enhanced/Configuration_adv.h | 36 +++++++++---------- config/examples/Mks/Robin/Configuration_adv.h | 36 +++++++++---------- .../Mks/Robin_Lite3/Configuration_adv.h | 36 +++++++++---------- .../Mks/Robin_Pro/Configuration_adv.h | 36 +++++++++---------- config/examples/Mks/Sbase/Configuration_adv.h | 36 +++++++++---------- .../examples/Modix/Big60/Configuration_adv.h | 36 +++++++++---------- config/examples/Nextion/Configuration_adv.h | 36 +++++++++---------- .../Hadron/Sanguinololu/Configuration_adv.h | 36 +++++++++---------- .../Opulo/Lumen_REV3/Configuration_adv.h | 36 +++++++++---------- .../Opulo/Lumen_REV4/Configuration_adv.h | 36 +++++++++---------- config/examples/Ortur 4/Configuration_adv.h | 36 +++++++++---------- .../examples/Polargraph/Configuration_adv.h | 36 +++++++++---------- .../PrintrboardG2/Configuration_adv.h | 36 +++++++++---------- .../Simple Metal RevD/Configuration_adv.h | 36 +++++++++---------- config/examples/Prusa/MK3/Configuration_adv.h | 36 +++++++++---------- .../Configuration_adv.h | 36 +++++++++---------- .../examples/Qidi/Qidi 1/Configuration_adv.h | 36 +++++++++---------- .../examples/Raiscube/A8r/Configuration_adv.h | 36 +++++++++---------- .../RapideLite/RL200/Configuration_adv.h | 36 +++++++++---------- .../Renkforce/RF100/Configuration_adv.h | 36 +++++++++---------- .../Renkforce/RF100XL/Configuration_adv.h | 36 +++++++++---------- .../Renkforce/RF100v2/Configuration_adv.h | 36 +++++++++---------- .../RepRapPro/Huxley/Configuration_adv.h | 36 +++++++++---------- .../Megatronics/Configuration_adv.h | 36 +++++++++---------- .../Minitronics20/CNC/Configuration_adv.h | 36 +++++++++---------- config/examples/RigidBot/Configuration_adv.h | 36 +++++++++---------- .../examples/Robo3D/R1+/Configuration_adv.h | 36 +++++++++---------- .../SCARA/MP_SCARA/Configuration_adv.h | 36 +++++++++---------- .../examples/SCARA/Morgan/Configuration_adv.h | 36 +++++++++---------- .../Black_STM32F407VET6/Configuration_adv.h | 36 +++++++++---------- .../STM32/STM32F103RE/Configuration_adv.h | 36 +++++++++---------- .../Simax/Mi-M200/Configuration_adv.h | 36 +++++++++---------- config/examples/Simulator/Configuration_adv.h | 36 +++++++++---------- .../Configuration_adv.h | 36 +++++++++---------- .../Configuration_adv.h | 36 +++++++++---------- .../Configuration_adv.h | 36 +++++++++---------- .../SV-01/CrealityV22/Configuration_adv.h | 36 +++++++++---------- .../SV-01/CrealityV221/Configuration_adv.h | 36 +++++++++---------- .../examples/Sovol/SV-02/Configuration_adv.h | 36 +++++++++---------- .../examples/Sovol/SV-03/Configuration_adv.h | 36 +++++++++---------- config/examples/Sunlu/S8/Configuration_adv.h | 36 +++++++++---------- config/examples/Sunlu/T3/Configuration_adv.h | 36 +++++++++---------- .../TPARA/AXEL_TPARA/Configuration_adv.h | 36 +++++++++---------- .../Tevo/Michelangelo/Configuration_adv.h | 36 +++++++++---------- .../examples/Tevo/Nereus/Configuration_adv.h | 36 +++++++++---------- .../MKS Gen_L/Configuration_adv.h | 36 +++++++++---------- .../MKS SGen_L/Configuration_adv.h | 36 +++++++++---------- .../Tornado/V1 (MKS Base)/Configuration_adv.h | 36 +++++++++---------- .../V2 (MKS Gen_L)/Configuration_adv.h | 36 +++++++++---------- .../Ditto Pro/RAMPS 1.4/Configuration_adv.h | 36 +++++++++---------- config/examples/TinyBoy2/Configuration_adv.h | 36 +++++++++---------- .../CXY-v6-191017 board/Configuration_adv.h | 36 +++++++++---------- config/examples/Tronxy/X1/Configuration_adv.h | 36 +++++++++---------- .../examples/Tronxy/X3A/Configuration_adv.h | 36 +++++++++---------- .../Configuration_adv.h | 36 +++++++++---------- .../Configuration_adv.h | 36 +++++++++---------- .../examples/Tronxy/X5S/Configuration_adv.h | 36 +++++++++---------- .../Tronxy/X5SA-2E/Configuration_adv.h | 36 +++++++++---------- .../examples/Tronxy/X5SA/Configuration_adv.h | 36 +++++++++---------- .../examples/Tronxy/XY100/Configuration_adv.h | 36 +++++++++---------- .../Tronxy/XY2-Pro/Configuration_adv.h | 36 +++++++++---------- .../Two Trees/BlueR Plus/Configuration_adv.h | 36 +++++++++---------- .../BlueR/BlueR V1/Configuration_adv.h | 36 +++++++++---------- .../BlueR/BlueR V2/Configuration_adv.h | 36 +++++++++---------- .../BlueR/BlueR V3/Configuration_adv.h | 36 +++++++++---------- .../Sapphire Plus V2.1/Configuration_adv.h | 36 +++++++++---------- .../Sapphire Plus V2/Configuration_adv.h | 36 +++++++++---------- .../Sapphire Pro/Configuration_adv.h | 36 +++++++++---------- .../UltiMachine/Archim1/Configuration_adv.h | 36 +++++++++---------- .../UltiMachine/Archim2/Configuration_adv.h | 36 +++++++++---------- .../Ultimaker 2+/Configuration_adv.h | 36 +++++++++---------- .../Ultimaker/Ultimaker 2/Configuration_adv.h | 36 +++++++++---------- .../Configuration_adv.h | 36 +++++++++---------- .../Configuration_adv.h | 36 +++++++++---------- .../Configuration_adv.h | 36 +++++++++---------- .../examples/VORONDesign/Configuration_adv.h | 36 +++++++++---------- .../K8200 Upgraded/Configuration_adv.h | 36 +++++++++---------- .../Velleman/K8200/Configuration_adv.h | 36 +++++++++---------- .../K8400/Dual-head/Configuration_adv.h | 36 +++++++++---------- .../K8400/Single-head/Configuration_adv.h | 36 +++++++++---------- .../Configuration_adv.h | 36 +++++++++---------- .../WASP/PowerWASP/Configuration_adv.h | 36 +++++++++---------- .../Wanhao/Duplicator 4S/Configuration_adv.h | 36 +++++++++---------- .../Wanhao/Duplicator 6/Configuration_adv.h | 36 +++++++++---------- .../Duplicator i3 2.1/Configuration_adv.h | 36 +++++++++---------- .../Duplicator i3 Mini/Configuration_adv.h | 36 +++++++++---------- .../Duplicator i3 Plus/Configuration_adv.h | 36 +++++++++---------- .../Weedo/Tina2/V2/Configuration_adv.h | 36 +++++++++---------- .../Weedo/Tina2/V3/Configuration_adv.h | 36 +++++++++---------- .../Weistek/wt150/Configuration_adv.h | 36 +++++++++---------- .../Zonestar/P802M/Configuration_adv.h | 36 +++++++++---------- .../Configuration_adv.h | 36 +++++++++---------- .../Configuration_adv.h | 36 +++++++++---------- .../Kossel Linear Plus/Configuration_adv.h | 36 +++++++++---------- .../delta/Anycubic/Kossel/Configuration_adv.h | 36 +++++++++---------- .../Anycubic/Predator/Configuration_adv.h | 36 +++++++++---------- .../Dreammaker/Overlord/Configuration_adv.h | 36 +++++++++---------- .../Overlord_Pro/Configuration_adv.h | 36 +++++++++---------- .../FLSUN/Q5-nano_v1/Configuration_adv.h | 36 +++++++++---------- .../FLSUN/Q5-nano_v2/Configuration_adv.h | 36 +++++++++---------- .../delta/FLSUN/QQ-S/Configuration_adv.h | 36 +++++++++---------- .../delta/FLSUN/QQS-Pro/Configuration_adv.h | 36 +++++++++---------- .../FLSUN/auto_calibrate/Configuration_adv.h | 36 +++++++++---------- .../delta/FLSUN/kossel/Configuration_adv.h | 36 +++++++++---------- .../FLSUN/kossel_mini/Configuration_adv.h | 36 +++++++++---------- .../delta/Geeetech/G2/Configuration_adv.h | 36 +++++++++---------- .../delta/Geeetech/G2Pro/Configuration_adv.h | 36 +++++++++---------- .../delta/Geeetech/G2S/Configuration_adv.h | 36 +++++++++---------- .../delta/Geeetech/G2SPro/Configuration_adv.h | 36 +++++++++---------- .../Geeetech/Rostock 301/Configuration_adv.h | 34 +++++++++--------- .../delta/Hatchbox_Alpha/Configuration_adv.h | 36 +++++++++---------- .../delta/MKS/SBASE/Configuration_adv.h | 36 +++++++++---------- .../delta/Malyan M300/Configuration_adv.h | 36 +++++++++---------- .../Tevo Little Monster/Configuration_adv.h | 36 +++++++++---------- .../delta/Velleman/K8800/Configuration_adv.h | 36 +++++++++---------- .../delta/generic/Configuration_adv.h | 36 +++++++++---------- .../delta/kossel_clear/Configuration_adv.h | 36 +++++++++---------- .../delta/kossel_mini/Configuration_adv.h | 36 +++++++++---------- .../delta/kossel_pro/Configuration_adv.h | 36 +++++++++---------- .../delta/kossel_xl/Configuration_adv.h | 36 +++++++++---------- .../gCreate/gMax1.5+/Configuration_adv.h | 36 +++++++++---------- .../Octopus 8 LINEAR_AXES/Configuration_adv.h | 36 +++++++++---------- .../RAMPS 5 LINEAR_AXES/Configuration_adv.h | 36 +++++++++---------- config/examples/makibox/Configuration_adv.h | 36 +++++++++---------- .../tvrrug/Round2/Configuration_adv.h | 36 +++++++++---------- 354 files changed, 6371 insertions(+), 6371 deletions(-) diff --git a/config/default/Configuration_adv.h b/config/default/Configuration_adv.h index 52c91da588..3cbbe7831d 100644 --- a/config/default/Configuration_adv.h +++ b/config/default/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h index 66151ededc..e19b77bf11 100644 --- a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h +++ b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h index cc0ed1e3c6..f2043734ed 100644 --- a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h +++ b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 360 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 360 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h index 0212f5864d..e6c0c3b9da 100644 --- a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h +++ b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h index 2282c8a501..a67aa51881 100644 --- a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h +++ b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 60 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 10 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 60 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 10 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 60 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 60 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2449,7 +2449,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2649,7 +2649,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Alfawise/U20/Configuration_adv.h b/config/examples/Alfawise/U20/Configuration_adv.h index eebca2a89d..63b631497c 100644 --- a/config/examples/Alfawise/U20/Configuration_adv.h +++ b/config/examples/Alfawise/U20/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 60 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 10 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 60 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 10 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 60 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 60 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2440,7 +2440,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2640,7 +2640,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/AliExpress/CL-260/Configuration_adv.h b/config/examples/AliExpress/CL-260/Configuration_adv.h index 52c91da588..3cbbe7831d 100644 --- a/config/examples/AliExpress/CL-260/Configuration_adv.h +++ b/config/examples/AliExpress/CL-260/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/AliExpress/UM2pExt/Configuration_adv.h b/config/examples/AliExpress/UM2pExt/Configuration_adv.h index 3c7496cefb..97ef791d02 100644 --- a/config/examples/AliExpress/UM2pExt/Configuration_adv.h +++ b/config/examples/AliExpress/UM2pExt/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Anet/A2/Configuration_adv.h b/config/examples/Anet/A2/Configuration_adv.h index c2e0e74c8c..ee74e14109 100644 --- a/config/examples/Anet/A2/Configuration_adv.h +++ b/config/examples/Anet/A2/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Anet/A2plus/Configuration_adv.h b/config/examples/Anet/A2plus/Configuration_adv.h index c2e0e74c8c..ee74e14109 100644 --- a/config/examples/Anet/A2plus/Configuration_adv.h +++ b/config/examples/Anet/A2plus/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Anet/A6/Configuration_adv.h b/config/examples/Anet/A6/Configuration_adv.h index 6b517bae29..1802de74ab 100644 --- a/config/examples/Anet/A6/Configuration_adv.h +++ b/config/examples/Anet/A6/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 60 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 10 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 60 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 10 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 60 // Seconds - #define WATCH_TEMP_INCREASE 5 // Degrees Celsius + #define WATCH_TEMP_PERIOD 60 // (seconds) + #define WATCH_TEMP_INCREASE 5 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 60 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 5 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 60 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 5 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 180 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 180 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Anet/A8/Configuration_adv.h b/config/examples/Anet/A8/Configuration_adv.h index e5485f4365..f3cdeee355 100644 --- a/config/examples/Anet/A8/Configuration_adv.h +++ b/config/examples/Anet/A8/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 60 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 10 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 60 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 10 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 60 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 5 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 60 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 5 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 180 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 180 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Anet/A8plus/Configuration_adv.h b/config/examples/Anet/A8plus/Configuration_adv.h index 2d9857f1ca..9ec9dcf13d 100644 --- a/config/examples/Anet/A8plus/Configuration_adv.h +++ b/config/examples/Anet/A8plus/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Anet/A9/Configuration_adv.h b/config/examples/Anet/A9/Configuration_adv.h index a65ec0da48..0350848217 100644 --- a/config/examples/Anet/A9/Configuration_adv.h +++ b/config/examples/Anet/A9/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Anet/E10/Configuration_adv.h b/config/examples/Anet/E10/Configuration_adv.h index b1a57fc711..d26d17ba54 100644 --- a/config/examples/Anet/E10/Configuration_adv.h +++ b/config/examples/Anet/E10/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 12 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 12 // (°C) #define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 30 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 30 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 5 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 5 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 80 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 80 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. #define ADVANCED_OK diff --git a/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h b/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h index 0495464e17..8c645b7779 100644 --- a/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h +++ b/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Anet/E16/Stock/Configuration_adv.h b/config/examples/Anet/E16/Stock/Configuration_adv.h index eb8eabdba6..570e2d0688 100644 --- a/config/examples/Anet/E16/Stock/Configuration_adv.h +++ b/config/examples/Anet/E16/Stock/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 12 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 12 // (°C) #define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 30 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 30 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 5 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 5 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 80 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 80 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -#define NO_TIMEOUTS 1000 // Milliseconds +#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. #define ADVANCED_OK diff --git a/config/examples/Anet/ET4+/Configuration_adv.h b/config/examples/Anet/ET4+/Configuration_adv.h index c0f16ca2ea..cb17925399 100644 --- a/config/examples/Anet/ET4+/Configuration_adv.h +++ b/config/examples/Anet/ET4+/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Anet/ET4-Pro/Configuration_adv.h b/config/examples/Anet/ET4-Pro/Configuration_adv.h index c0f16ca2ea..cb17925399 100644 --- a/config/examples/Anet/ET4-Pro/Configuration_adv.h +++ b/config/examples/Anet/ET4-Pro/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Anet/ET4/Configuration_adv.h b/config/examples/Anet/ET4/Configuration_adv.h index 17c498430e..110df277ac 100644 --- a/config/examples/Anet/ET4/Configuration_adv.h +++ b/config/examples/Anet/ET4/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Anet/ET4X/Configuration_adv.h b/config/examples/Anet/ET4X/Configuration_adv.h index 17c498430e..110df277ac 100644 --- a/config/examples/Anet/ET4X/Configuration_adv.h +++ b/config/examples/Anet/ET4X/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Anet/ET5-Pro/Configuration_adv.h b/config/examples/Anet/ET5-Pro/Configuration_adv.h index 307d91fc91..00e63a28da 100644 --- a/config/examples/Anet/ET5-Pro/Configuration_adv.h +++ b/config/examples/Anet/ET5-Pro/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 180 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 180 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 180 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 180 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Anet/ET5/Configuration_adv.h b/config/examples/Anet/ET5/Configuration_adv.h index 307d91fc91..00e63a28da 100644 --- a/config/examples/Anet/ET5/Configuration_adv.h +++ b/config/examples/Anet/ET5/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 180 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 180 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 180 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 180 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Anet/ET5X/Configuration_adv.h b/config/examples/Anet/ET5X/Configuration_adv.h index 307d91fc91..00e63a28da 100644 --- a/config/examples/Anet/ET5X/Configuration_adv.h +++ b/config/examples/Anet/ET5X/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 180 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 180 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 180 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 180 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/AnyCubic/Chiron/Configuration_adv.h b/config/examples/AnyCubic/Chiron/Configuration_adv.h index c91aec1995..32753c6c66 100644 --- a/config/examples/AnyCubic/Chiron/Configuration_adv.h +++ b/config/examples/AnyCubic/Chiron/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 10 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 10 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 4 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 40 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 40 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h index d8417302c1..178ce6ca6a 100644 --- a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h +++ b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h index 0356959eb8..e873d688c3 100644 --- a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h +++ b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h index 03159f4878..333ae156d3 100644 --- a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h +++ b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/AnyCubic/Vyper/Configuration_adv.h b/config/examples/AnyCubic/Vyper/Configuration_adv.h index 2014b903ef..e1f0e7f65b 100644 --- a/config/examples/AnyCubic/Vyper/Configuration_adv.h +++ b/config/examples/AnyCubic/Vyper/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 8 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 8 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 20 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration_adv.h b/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration_adv.h index 1e3ed4326a..bd1ccaa97d 100644 --- a/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration_adv.h +++ b/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration_adv.h b/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration_adv.h index 5dccd288c8..57ef6ea294 100644 --- a/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration_adv.h +++ b/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/AnyCubic/i3/Configuration_adv.h b/config/examples/AnyCubic/i3/Configuration_adv.h index 2e0daa875f..ef9df30c30 100644 --- a/config/examples/AnyCubic/i3/Configuration_adv.h +++ b/config/examples/AnyCubic/i3/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/ArmEd/Configuration_adv.h b/config/examples/ArmEd/Configuration_adv.h index 614c734da1..c4dc6356b1 100644 --- a/config/examples/ArmEd/Configuration_adv.h +++ b/config/examples/ArmEd/Configuration_adv.h @@ -309,8 +309,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -332,50 +332,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2444,7 +2444,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2644,7 +2644,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Artillery/Genius Pro/Configuration_adv.h b/config/examples/Artillery/Genius Pro/Configuration_adv.h index 413d1235b3..0b4f1b8d64 100644 --- a/config/examples/Artillery/Genius Pro/Configuration_adv.h +++ b/config/examples/Artillery/Genius Pro/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Artillery/Genius/BLTouch/Configuration_adv.h b/config/examples/Artillery/Genius/BLTouch/Configuration_adv.h index 45c67d330a..2b06ee0778 100644 --- a/config/examples/Artillery/Genius/BLTouch/Configuration_adv.h +++ b/config/examples/Artillery/Genius/BLTouch/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Artillery/Genius/V1/Configuration_adv.h b/config/examples/Artillery/Genius/V1/Configuration_adv.h index 0fca0c5b08..f9e33449e7 100644 --- a/config/examples/Artillery/Genius/V1/Configuration_adv.h +++ b/config/examples/Artillery/Genius/V1/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Artillery/Hornet/Configuration_adv.h b/config/examples/Artillery/Hornet/Configuration_adv.h index 8fa30286be..f72b67317f 100644 --- a/config/examples/Artillery/Hornet/Configuration_adv.h +++ b/config/examples/Artillery/Hornet/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h b/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h index 00081f657c..c2ee43868a 100644 --- a/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h +++ b/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h b/config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h index 0fca0c5b08..f9e33449e7 100644 --- a/config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h +++ b/config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Artillery/Sidewinder X2/Configuration_adv.h b/config/examples/Artillery/Sidewinder X2/Configuration_adv.h index 47cc098343..46d45144e9 100644 --- a/config/examples/Artillery/Sidewinder X2/Configuration_adv.h +++ b/config/examples/Artillery/Sidewinder X2/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Azteeg/X5GT/Configuration_adv.h b/config/examples/Azteeg/X5GT/Configuration_adv.h index 52c91da588..3cbbe7831d 100644 --- a/config/examples/Azteeg/X5GT/Configuration_adv.h +++ b/config/examples/Azteeg/X5GT/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h index 0fbfc19958..c1e6edbd64 100644 --- a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 45 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 45 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 2 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 60 // Seconds - #define WATCH_TEMP_INCREASE 1 // Degrees Celsius + #define WATCH_TEMP_PERIOD 60 // (seconds) + #define WATCH_TEMP_INCREASE 1 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 60 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 60 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 3 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 1 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 1 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/BIBO/TouchX/default/Configuration_adv.h b/config/examples/BIBO/TouchX/default/Configuration_adv.h index 48df748a24..09dca6fe1c 100644 --- a/config/examples/BIBO/TouchX/default/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/default/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 60 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 60 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 2 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 45 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 45 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2436,7 +2436,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2636,7 +2636,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/BIQU/B1 SE Plus/Configuration_adv.h b/config/examples/BIQU/B1 SE Plus/Configuration_adv.h index 8162c34752..5cd5d8c4ec 100644 --- a/config/examples/BIQU/B1 SE Plus/Configuration_adv.h +++ b/config/examples/BIQU/B1 SE Plus/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 180 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 180 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 180 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 180 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/BIQU/B1 SE/Configuration_adv.h b/config/examples/BIQU/B1 SE/Configuration_adv.h index c2295f7e03..5346db484e 100644 --- a/config/examples/BIQU/B1 SE/Configuration_adv.h +++ b/config/examples/BIQU/B1 SE/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 180 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 180 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 180 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 180 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/BIQU/B1/Configuration_adv.h b/config/examples/BIQU/B1/Configuration_adv.h index 3c8bb74731..f70d45d3fd 100644 --- a/config/examples/BIQU/B1/Configuration_adv.h +++ b/config/examples/BIQU/B1/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 180 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 180 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 180 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 180 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2441,7 +2441,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2641,7 +2641,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/BIQU/BX/Configuration_adv.h b/config/examples/BIQU/BX/Configuration_adv.h index ee244fccfa..7035d55d07 100644 --- a/config/examples/BIQU/BX/Configuration_adv.h +++ b/config/examples/BIQU/BX/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 50 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 5 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 50 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 5 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 30 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 30 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2440,7 +2440,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2640,7 +2640,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/BIQU/Hurakan/Configuration_adv.h b/config/examples/BIQU/Hurakan/Configuration_adv.h index 32fcf113a7..192329e1fb 100644 --- a/config/examples/BIQU/Hurakan/Configuration_adv.h +++ b/config/examples/BIQU/Hurakan/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 180 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 180 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 180 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 180 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2440,7 +2440,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2640,7 +2640,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/BIQU/Thunder Standard/Configuration_adv.h b/config/examples/BIQU/Thunder Standard/Configuration_adv.h index f3d6b0b85f..f3501c2de5 100644 --- a/config/examples/BIQU/Thunder Standard/Configuration_adv.h +++ b/config/examples/BIQU/Thunder Standard/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/BQ/Hephestos/Configuration_adv.h b/config/examples/BQ/Hephestos/Configuration_adv.h index da3f43edab..1b6be32ae8 100644 --- a/config/examples/BQ/Hephestos/Configuration_adv.h +++ b/config/examples/BQ/Hephestos/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/BQ/Hephestos_2/Configuration_adv.h b/config/examples/BQ/Hephestos_2/Configuration_adv.h index 3fe8215d8f..237bb41119 100644 --- a/config/examples/BQ/Hephestos_2/Configuration_adv.h +++ b/config/examples/BQ/Hephestos_2/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2447,7 +2447,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2647,7 +2647,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -#define NO_TIMEOUTS 1000 // Milliseconds +#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. #define ADVANCED_OK diff --git a/config/examples/BQ/WITBOX/Configuration_adv.h b/config/examples/BQ/WITBOX/Configuration_adv.h index da3f43edab..1b6be32ae8 100644 --- a/config/examples/BQ/WITBOX/Configuration_adv.h +++ b/config/examples/BQ/WITBOX/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/CTC/A13/Configuration_adv.h b/config/examples/CTC/A13/Configuration_adv.h index 1c4eda80a6..ee25999c09 100644 --- a/config/examples/CTC/A13/Configuration_adv.h +++ b/config/examples/CTC/A13/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/CTC/Bizer/Configuration_adv.h b/config/examples/CTC/Bizer/Configuration_adv.h index 2817e28471..0650e09fa4 100644 --- a/config/examples/CTC/Bizer/Configuration_adv.h +++ b/config/examples/CTC/Bizer/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/CTC/i3 2560 Rev A/no probe/Configuration_adv.h b/config/examples/CTC/i3 2560 Rev A/no probe/Configuration_adv.h index 52c91da588..3cbbe7831d 100644 --- a/config/examples/CTC/i3 2560 Rev A/no probe/Configuration_adv.h +++ b/config/examples/CTC/i3 2560 Rev A/no probe/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Cartesio/Configuration_adv.h b/config/examples/Cartesio/Configuration_adv.h index 63b2911ced..179a5b7690 100644 --- a/config/examples/Cartesio/Configuration_adv.h +++ b/config/examples/Cartesio/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Copymaster3D/300/Configuration_adv.h b/config/examples/Copymaster3D/300/Configuration_adv.h index 52c91da588..3cbbe7831d 100644 --- a/config/examples/Copymaster3D/300/Configuration_adv.h +++ b/config/examples/Copymaster3D/300/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Copymaster3D/400/Configuration_adv.h b/config/examples/Copymaster3D/400/Configuration_adv.h index 52c91da588..3cbbe7831d 100644 --- a/config/examples/Copymaster3D/400/Configuration_adv.h +++ b/config/examples/Copymaster3D/400/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Copymaster3D/500/Configuration_adv.h b/config/examples/Copymaster3D/500/Configuration_adv.h index 52c91da588..3cbbe7831d 100644 --- a/config/examples/Copymaster3D/500/Configuration_adv.h +++ b/config/examples/Copymaster3D/500/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Creality/CR-10 Max/Configuration_adv.h b/config/examples/Creality/CR-10 Max/Configuration_adv.h index 8c4649c620..6cc097f2b3 100644 --- a/config/examples/Creality/CR-10 Max/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Max/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2440,7 +2440,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2640,7 +2640,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index a140f9d319..a1a3ada8ad 100644 --- a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. #define ADVANCED_OK diff --git a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h index 76b15604e4..e8c0dfbbfa 100644 --- a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. #define ADVANCED_OK diff --git a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h index 1bd5ebd708..aaa84fba05 100644 --- a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h index c254b8d06f..f01eae094f 100644 --- a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2438,7 +2438,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2638,7 +2638,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h index 89fe64345a..ff2113043f 100644 --- a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 4 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 600 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 600 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. #define ADVANCED_OK diff --git a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h index b7901c002a..86a00bc314 100644 --- a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 4 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 600 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 600 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. #define ADVANCED_OK diff --git a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration_adv.h b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration_adv.h index 299a12f2bb..b258ee104d 100644 --- a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 180 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 180 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 180 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 180 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2440,7 +2440,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2640,7 +2640,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. #define ADVANCED_OK diff --git a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h index 89fe64345a..ff2113043f 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 4 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 600 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 600 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. #define ADVANCED_OK diff --git a/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration_adv.h b/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration_adv.h index 7971ff2137..299245cda1 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 4 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 600 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 600 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. #define ADVANCED_OK diff --git a/config/examples/Creality/CR-10 V2/Configuration_adv.h b/config/examples/Creality/CR-10 V2/Configuration_adv.h index 8bbf0d880c..25cbc3d074 100644 --- a/config/examples/Creality/CR-10 V2/Configuration_adv.h +++ b/config/examples/Creality/CR-10 V2/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 60 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 10 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 60 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 10 // (°C) #define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 50 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 50 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 50 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 50 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 180 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 180 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2444,7 +2444,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2644,7 +2644,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. #define ADVANCED_OK diff --git a/config/examples/Creality/CR-10 V3/Configuration_adv.h b/config/examples/Creality/CR-10 V3/Configuration_adv.h index 65e687e1c4..7a8eb03be7 100644 --- a/config/examples/Creality/CR-10 V3/Configuration_adv.h +++ b/config/examples/Creality/CR-10 V3/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 60 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 10 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 60 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 10 // (°C) #define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 50 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 50 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 50 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 50 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 180 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 180 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2446,7 +2446,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2646,7 +2646,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. #define ADVANCED_OK diff --git a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index b81e1901b7..6d149a6f26 100644 --- a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 4 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 4 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h index 9489cc7907..cc2d01963e 100644 --- a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 4 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 4 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h index 0d479911fd..29b63db1e5 100644 --- a/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Creality/CR-10S Pro/Configuration_adv.h b/config/examples/Creality/CR-10S Pro/Configuration_adv.h index c4a9df94f5..8bd9f23c60 100644 --- a/config/examples/Creality/CR-10S Pro/Configuration_adv.h +++ b/config/examples/Creality/CR-10S Pro/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) #define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2440,7 +2440,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2640,7 +2640,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -#define NO_TIMEOUTS 1000 // Milliseconds +#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. #define ADVANCED_OK diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h index 495e4764b0..fc9035cc2e 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. #define ADVANCED_OK diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration_adv.h index a432673a77..e3ae5dd8a5 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 120 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 120 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. #define ADVANCED_OK diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index b81e1901b7..6d149a6f26 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 4 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 4 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h index cc485f2d61..39cdd0a264 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h index 84b4ab1f19..16fe8a600d 100644 --- a/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. #define ADVANCED_OK diff --git a/config/examples/Creality/CR-20 Pro/Configuration_adv.h b/config/examples/Creality/CR-20 Pro/Configuration_adv.h index 3dcd9008a8..64779880c9 100644 --- a/config/examples/Creality/CR-20 Pro/Configuration_adv.h +++ b/config/examples/Creality/CR-20 Pro/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration_adv.h b/config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration_adv.h index 3cc6454862..ec96a6041c 100644 --- a/config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration_adv.h +++ b/config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Creality/CR-20/Stock/Configuration_adv.h b/config/examples/Creality/CR-20/Stock/Configuration_adv.h index 3cc6454862..ec96a6041c 100644 --- a/config/examples/Creality/CR-20/Stock/Configuration_adv.h +++ b/config/examples/Creality/CR-20/Stock/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Creality/CR-30 PrintMill/Configuration_adv.h b/config/examples/Creality/CR-30 PrintMill/Configuration_adv.h index f2c1cd2181..6dd96041b8 100644 --- a/config/examples/Creality/CR-30 PrintMill/Configuration_adv.h +++ b/config/examples/Creality/CR-30 PrintMill/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 180 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 180 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 180 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 180 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Creality/CR-6 SE/Configuration_adv.h b/config/examples/Creality/CR-6 SE/Configuration_adv.h index 0da47a0a34..827869f845 100644 --- a/config/examples/Creality/CR-6 SE/Configuration_adv.h +++ b/config/examples/Creality/CR-6 SE/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 60 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 60 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 60 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 60 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 180 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 180 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 180 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 180 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2440,7 +2440,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2640,7 +2640,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Creality/CR-8/Configuration_adv.h b/config/examples/Creality/CR-8/Configuration_adv.h index ea2117c432..9361f65972 100644 --- a/config/examples/Creality/CR-8/Configuration_adv.h +++ b/config/examples/Creality/CR-8/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration_adv.h b/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration_adv.h index c8567583fc..1c80053ebf 100644 --- a/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration_adv.h +++ b/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 180 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 180 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 180 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 180 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2440,7 +2440,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2640,7 +2640,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Creality/Ender-2/Configuration_adv.h b/config/examples/Creality/Ender-2/Configuration_adv.h index 97ca6e9a74..b07c1249a2 100644 --- a/config/examples/Creality/Ender-2/Configuration_adv.h +++ b/config/examples/Creality/Ender-2/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Creality/Ender-3 Max Neo/Configuration_adv.h b/config/examples/Creality/Ender-3 Max Neo/Configuration_adv.h index 9a1b838dda..7e04928ad1 100644 --- a/config/examples/Creality/Ender-3 Max Neo/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Max Neo/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 60 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 60 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 100 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 100 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Creality/Ender-3 Max/Configuration_adv.h b/config/examples/Creality/Ender-3 Max/Configuration_adv.h index 78c75819de..65d94dc357 100644 --- a/config/examples/Creality/Ender-3 Max/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Max/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 60 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 60 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 100 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 100 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2440,7 +2440,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2640,7 +2640,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Creality/Ender-3 Neo/Configuration_adv.h b/config/examples/Creality/Ender-3 Neo/Configuration_adv.h index 8aceff9887..a9b8044fae 100644 --- a/config/examples/Creality/Ender-3 Neo/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Neo/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 180 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 180 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 180 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 180 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2440,7 +2440,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2640,7 +2640,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h index 2e5666219e..bb7cbe6ffb 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h index e75b6fc91b..5b27b52345 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index e75b6fc91b..5b27b52345 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 8fb745dc87..918e42c52b 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h index b1d469cc0a..9da9536d1f 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h index 4d4eba5349..c0f255c178 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h index 2327213593..92fbbda977 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h index d358fe6bd1..e33a69a6f5 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Creality/Ender-3 S1 Plus/Configuration_adv.h b/config/examples/Creality/Ender-3 S1 Plus/Configuration_adv.h index f1f732c8ad..4329811916 100644 --- a/config/examples/Creality/Ender-3 S1 Plus/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 S1 Plus/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 180 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 180 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 180 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 180 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. #define ADVANCED_OK diff --git a/config/examples/Creality/Ender-3 S1 Pro/Configuration_adv.h b/config/examples/Creality/Ender-3 S1 Pro/Configuration_adv.h index f1f732c8ad..4329811916 100644 --- a/config/examples/Creality/Ender-3 S1 Pro/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 S1 Pro/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 180 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 180 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 180 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 180 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. #define ADVANCED_OK diff --git a/config/examples/Creality/Ender-3 S1/STM32F1/Configuration_adv.h b/config/examples/Creality/Ender-3 S1/STM32F1/Configuration_adv.h index b084185fd2..fe72f3e203 100644 --- a/config/examples/Creality/Ender-3 S1/STM32F1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 S1/STM32F1/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 180 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 180 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 180 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 180 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. #define ADVANCED_OK diff --git a/config/examples/Creality/Ender-3 S1/STM32F4/Configuration_adv.h b/config/examples/Creality/Ender-3 S1/STM32F4/Configuration_adv.h index b806f7d560..a9dd246979 100644 --- a/config/examples/Creality/Ender-3 S1/STM32F4/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 S1/STM32F4/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 180 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 180 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 180 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 180 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. #define ADVANCED_OK diff --git a/config/examples/Creality/Ender-3 V2 Neo/Configuration_adv.h b/config/examples/Creality/Ender-3 V2 Neo/Configuration_adv.h index 2efcbb9b7c..56a0fecfdd 100644 --- a/config/examples/Creality/Ender-3 V2 Neo/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2 Neo/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 180 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 180 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 180 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 180 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2440,7 +2440,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2640,7 +2640,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration_adv.h index 3f38b64432..2e6f9cfb37 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 180 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 180 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 180 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 180 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2440,7 +2440,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2640,7 +2640,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration_adv.h index e46321f203..9cffae8b93 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 180 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 180 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 180 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 180 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2440,7 +2440,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2640,7 +2640,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration_adv.h index 4dd93b408f..119fb91f38 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 180 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 180 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 180 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 180 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2440,7 +2440,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2640,7 +2640,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration_adv.h index 372d8ddcc0..0220306daa 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 180 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 180 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 180 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 180 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2440,7 +2440,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2640,7 +2640,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration_adv.h index 32b9872cb3..dceecd3a5e 100644 --- a/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 180 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 180 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 180 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 180 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2440,7 +2440,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2640,7 +2640,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration_adv.h index 4fe543f75e..96408dc3c3 100644 --- a/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 180 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 180 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 180 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 180 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2440,7 +2440,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2640,7 +2640,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h index 01f64de208..1a972f7cb0 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Creality/Ender-3/BigTreeTech Manta E3 EZ/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech Manta E3 EZ/Configuration_adv.h index d9e097fac2..82ad85e8f5 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech Manta E3 EZ/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech Manta E3 EZ/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h index 087fb98b90..9cd07255c1 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h index 4151d1fed8..5a78d0a91b 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h index 955aaf8c14..f3723b0fcf 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h index 4151d1fed8..5a78d0a91b 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h index 8d10e0ba2b..e56c35f17e 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 3 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 90 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 90 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h index a660ae8d8b..e1a77a4253 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index a660ae8d8b..e1a77a4253 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 7ba3b081b7..17979ba0ad 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h index dbd95ad00f..bd5338bf15 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h index 4d4eba5349..c0f255c178 100644 --- a/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h index cd13d0312c..6371dfd597 100644 --- a/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h index d358fe6bd1..e33a69a6f5 100644 --- a/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h index 518908a5fd..1ec0e93ae2 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 120 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 120 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 60 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 60 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 100 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 100 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h index 518908a5fd..1ec0e93ae2 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 120 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 120 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 60 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 60 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 100 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 100 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration_adv.h index 2fa7d511bc..10356db792 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 120 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 120 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 60 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 60 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 100 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 100 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h index 518908a5fd..1ec0e93ae2 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 120 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 120 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 60 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 60 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 100 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 100 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h index 518908a5fd..1ec0e93ae2 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 120 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 120 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 60 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 60 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 100 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 100 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h index 5688c672de..3070e70157 100644 --- a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2438,7 +2438,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2638,7 +2638,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h b/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h index bc59a476fb..92b68d710d 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h b/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h index 5191763287..49eee78554 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h index e832cc535f..bdab45518d 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration_adv.h b/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration_adv.h index ebd49080d0..8bf0a618ca 100644 --- a/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Creality/Ender-4/Configuration_adv.h b/config/examples/Creality/Ender-4/Configuration_adv.h index d0b0cb87c5..6cf3658c26 100644 --- a/config/examples/Creality/Ender-4/Configuration_adv.h +++ b/config/examples/Creality/Ender-4/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 16 // Seconds - #define WATCH_TEMP_INCREASE 4 // Degrees Celsius + #define WATCH_TEMP_PERIOD 16 // (seconds) + #define WATCH_TEMP_INCREASE 4 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Creality/Ender-5 Plus/BigTreeTech SKR 3/Configuration_adv.h b/config/examples/Creality/Ender-5 Plus/BigTreeTech SKR 3/Configuration_adv.h index 180717c5ac..9f228c4cbc 100644 --- a/config/examples/Creality/Ender-5 Plus/BigTreeTech SKR 3/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Plus/BigTreeTech SKR 3/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2440,7 +2440,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2640,7 +2640,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Creality/Ender-5 Plus/CrealityV1 (ORIGIN UI)/Configuration_adv.h b/config/examples/Creality/Ender-5 Plus/CrealityV1 (ORIGIN UI)/Configuration_adv.h index cb6fca6e0c..649d1540a6 100644 --- a/config/examples/Creality/Ender-5 Plus/CrealityV1 (ORIGIN UI)/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Plus/CrealityV1 (ORIGIN UI)/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2440,7 +2440,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2640,7 +2640,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Creality/Ender-5 Plus/CrealityV1 (RELOADED UI)/Configuration_adv.h b/config/examples/Creality/Ender-5 Plus/CrealityV1 (RELOADED UI)/Configuration_adv.h index 38fae065b1..475c268161 100644 --- a/config/examples/Creality/Ender-5 Plus/CrealityV1 (RELOADED UI)/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Plus/CrealityV1 (RELOADED UI)/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2440,7 +2440,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2640,7 +2640,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h index 02658c59d0..142c39037e 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index 94d5df3e30..23a15466a7 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h index 7821cfc0f1..b0dd81c99d 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 3.0 with BLTouch-HighTemp/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 3.0 with BLTouch-HighTemp/Configuration_adv.h index 9f20b4ec36..828bf6bd07 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 3.0 with BLTouch-HighTemp/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 3.0 with BLTouch-HighTemp/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h index 3e1cca00d2..cdabaa6d1a 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h index 75d1980a4e..27b2ce0c55 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2440,7 +2440,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2640,7 +2640,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h index 3c9cacb12f..c62b1e0836 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Creality/Ender-5 S1/Configuration_adv.h b/config/examples/Creality/Ender-5 S1/Configuration_adv.h index ac71add31f..808d0dc041 100644 --- a/config/examples/Creality/Ender-5 S1/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 S1/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 180 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 180 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 180 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 180 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 60 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 60 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2445,7 +2445,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2645,7 +2645,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h index 02658c59d0..142c39037e 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h index 321f227e34..83e374a63b 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index 5a2c86521c..72f1b348c7 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index b2b9c80888..032f67d6a7 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 3.0 with BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 3.0 with BLTouch/Configuration_adv.h index ebc878c27a..40a83bac7a 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 3.0 with BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 3.0 with BLTouch/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 20 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h index f84bcc8e0b..f669f92ebf 100644 --- a/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h index 636f251747..59749e7198 100644 --- a/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Creality/Ender-6/Configuration_adv.h b/config/examples/Creality/Ender-6/Configuration_adv.h index bb54d528e2..06080e2756 100644 --- a/config/examples/Creality/Ender-6/Configuration_adv.h +++ b/config/examples/Creality/Ender-6/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2440,7 +2440,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2640,7 +2640,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. #define ADVANCED_OK diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h index 62a919e73f..a82ac8902c 100644 --- a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h +++ b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) #define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -#define NO_TIMEOUTS 1000 // Milliseconds +#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. #define ADVANCED_OK diff --git a/config/examples/Daycom/3DP-100/Configuration_adv.h b/config/examples/Daycom/3DP-100/Configuration_adv.h index b30395e302..6341291828 100644 --- a/config/examples/Daycom/3DP-100/Configuration_adv.h +++ b/config/examples/Daycom/3DP-100/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h b/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h index a9c10ff956..ddaf118579 100644 --- a/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h +++ b/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 60 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 5 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 60 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 5 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 60 // Seconds - #define WATCH_TEMP_INCREASE 5 // Degrees Celsius + #define WATCH_TEMP_PERIOD 60 // (seconds) + #define WATCH_TEMP_INCREASE 5 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 60 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 5 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 60 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 5 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 5 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 5 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 60 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 5 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 60 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 5 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 5 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 5 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. #define ADVANCED_OK diff --git a/config/examples/EasyThreeD/ET4000PLUS/Configuration_adv.h b/config/examples/EasyThreeD/ET4000PLUS/Configuration_adv.h index 6a888f42be..0bb04b0039 100644 --- a/config/examples/EasyThreeD/ET4000PLUS/Configuration_adv.h +++ b/config/examples/EasyThreeD/ET4000PLUS/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 60 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 60 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Einstart-S/Configuration_adv.h b/config/examples/Einstart-S/Configuration_adv.h index f9a0a84e40..8e0f4ea055 100644 --- a/config/examples/Einstart-S/Configuration_adv.h +++ b/config/examples/Einstart-S/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Elegoo/Neptune 2/Configuration_adv.h b/config/examples/Elegoo/Neptune 2/Configuration_adv.h index 64c380f103..ecdc2a6049 100644 --- a/config/examples/Elegoo/Neptune 2/Configuration_adv.h +++ b/config/examples/Elegoo/Neptune 2/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2440,7 +2440,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2640,7 +2640,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. #define ADVANCED_OK diff --git a/config/examples/Eryone/Thinker SE/Configuration_adv.h b/config/examples/Eryone/Thinker SE/Configuration_adv.h index b91cb36407..f299432c53 100644 --- a/config/examples/Eryone/Thinker SE/Configuration_adv.h +++ b/config/examples/Eryone/Thinker SE/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2445,7 +2445,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2645,7 +2645,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Eryone/Thinker V2/Configuration_adv.h b/config/examples/Eryone/Thinker V2/Configuration_adv.h index 74a48a1088..30f7bd4a9f 100644 --- a/config/examples/Eryone/Thinker V2/Configuration_adv.h +++ b/config/examples/Eryone/Thinker V2/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2445,7 +2445,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2645,7 +2645,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/FYSETC/AIO_II/Configuration_adv.h b/config/examples/FYSETC/AIO_II/Configuration_adv.h index dd2ddccf2a..7cceb3e7f0 100644 --- a/config/examples/FYSETC/AIO_II/Configuration_adv.h +++ b/config/examples/FYSETC/AIO_II/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 120 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 120 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/FYSETC/F6_13/Configuration_adv.h b/config/examples/FYSETC/F6_13/Configuration_adv.h index c6ee86138b..2530932d51 100644 --- a/config/examples/FYSETC/F6_13/Configuration_adv.h +++ b/config/examples/FYSETC/F6_13/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 120 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 120 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 60 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 60 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 100 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 100 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/FYSETC/S6/Configuration_adv.h b/config/examples/FYSETC/S6/Configuration_adv.h index 80ce1e7615..e54406e3e9 100644 --- a/config/examples/FYSETC/S6/Configuration_adv.h +++ b/config/examples/FYSETC/S6/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Felix/DUAL/Configuration_adv.h b/config/examples/Felix/DUAL/Configuration_adv.h index 1ee5fd6fc7..311ac7089e 100644 --- a/config/examples/Felix/DUAL/Configuration_adv.h +++ b/config/examples/Felix/DUAL/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Felix/Single/Configuration_adv.h b/config/examples/Felix/Single/Configuration_adv.h index 1ee5fd6fc7..311ac7089e 100644 --- a/config/examples/Felix/Single/Configuration_adv.h +++ b/config/examples/Felix/Single/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/FlashForge/Creator 2X/Configuration_adv.h b/config/examples/FlashForge/Creator 2X/Configuration_adv.h index bc8d0bdb37..9682072e1e 100644 --- a/config/examples/FlashForge/Creator 2X/Configuration_adv.h +++ b/config/examples/FlashForge/Creator 2X/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 60 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 60 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 60 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 60 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/FlashForge/CreatorPro/Configuration_adv.h b/config/examples/FlashForge/CreatorPro/Configuration_adv.h index 3cbe1d4c82..9d4de7fa0b 100644 --- a/config/examples/FlashForge/CreatorPro/Configuration_adv.h +++ b/config/examples/FlashForge/CreatorPro/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/FlyingBear/P902/Configuration_adv.h b/config/examples/FlyingBear/P902/Configuration_adv.h index c623a8c566..d4ed4ba5a7 100644 --- a/config/examples/FlyingBear/P902/Configuration_adv.h +++ b/config/examples/FlyingBear/P902/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/FlyingBear/P905H/Configuration_adv.h b/config/examples/FlyingBear/P905H/Configuration_adv.h index 570c638e6d..b93f85fd10 100644 --- a/config/examples/FlyingBear/P905H/Configuration_adv.h +++ b/config/examples/FlyingBear/P905H/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2442,7 +2442,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2642,7 +2642,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/FoamCutter/generic/Configuration_adv.h b/config/examples/FoamCutter/generic/Configuration_adv.h index 9ca7d30bcd..1c07f76441 100644 --- a/config/examples/FoamCutter/generic/Configuration_adv.h +++ b/config/examples/FoamCutter/generic/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/FoamCutter/rcKeith/Configuration_adv.h b/config/examples/FoamCutter/rcKeith/Configuration_adv.h index 9ca7d30bcd..1c07f76441 100644 --- a/config/examples/FoamCutter/rcKeith/Configuration_adv.h +++ b/config/examples/FoamCutter/rcKeith/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/FolgerTech/FT-5 R2/Configuration_adv.h b/config/examples/FolgerTech/FT-5 R2/Configuration_adv.h index af6f6d8536..5a0698b1aa 100644 --- a/config/examples/FolgerTech/FT-5 R2/Configuration_adv.h +++ b/config/examples/FolgerTech/FT-5 R2/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/config/examples/FolgerTech/i3-2020/Configuration_adv.h index b9b88556ef..dd52983984 100644 --- a/config/examples/FolgerTech/i3-2020/Configuration_adv.h +++ b/config/examples/FolgerTech/i3-2020/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 2 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Formbot/Raptor/Configuration_adv.h b/config/examples/Formbot/Raptor/Configuration_adv.h index 6491f9bfd5..a9913de3a2 100644 --- a/config/examples/Formbot/Raptor/Configuration_adv.h +++ b/config/examples/Formbot/Raptor/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 210 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 210 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 2 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 210 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 210 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 300 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 300 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2441,7 +2441,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2641,7 +2641,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. #define ADVANCED_OK diff --git a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h index d47450cde5..075271dbed 100644 --- a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h +++ b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 60 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 10 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 60 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 10 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 60 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 60 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 60 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 5 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 60 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 5 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Formbot/T_Rex_3/Configuration_adv.h b/config/examples/Formbot/T_Rex_3/Configuration_adv.h index 82e9657640..f0a177f654 100644 --- a/config/examples/Formbot/T_Rex_3/Configuration_adv.h +++ b/config/examples/Formbot/T_Rex_3/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 60 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 10 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 60 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 10 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 60 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 60 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 60 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 5 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 60 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 5 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2443,7 +2443,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2643,7 +2643,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Geeetech/A10/Configuration_adv.h b/config/examples/Geeetech/A10/Configuration_adv.h index e34dce4f33..5870e050ca 100644 --- a/config/examples/Geeetech/A10/Configuration_adv.h +++ b/config/examples/Geeetech/A10/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Geeetech/A10D/Configuration_adv.h b/config/examples/Geeetech/A10D/Configuration_adv.h index ebf5ba03ea..fb409c2b7f 100644 --- a/config/examples/Geeetech/A10D/Configuration_adv.h +++ b/config/examples/Geeetech/A10D/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Geeetech/A10M/Stock LCD/Configuration_adv.h b/config/examples/Geeetech/A10M/Stock LCD/Configuration_adv.h index d5d6eee5c3..5b4e026248 100644 --- a/config/examples/Geeetech/A10M/Stock LCD/Configuration_adv.h +++ b/config/examples/Geeetech/A10M/Stock LCD/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration_adv.h b/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration_adv.h index d5d6eee5c3..5b4e026248 100644 --- a/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration_adv.h +++ b/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Geeetech/A10PRO/Configuration_adv.h b/config/examples/Geeetech/A10PRO/Configuration_adv.h index e34dce4f33..5870e050ca 100644 --- a/config/examples/Geeetech/A10PRO/Configuration_adv.h +++ b/config/examples/Geeetech/A10PRO/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Geeetech/A10T/Stock LCD/Configuration_adv.h b/config/examples/Geeetech/A10T/Stock LCD/Configuration_adv.h index d5d6eee5c3..5b4e026248 100644 --- a/config/examples/Geeetech/A10T/Stock LCD/Configuration_adv.h +++ b/config/examples/Geeetech/A10T/Stock LCD/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration_adv.h b/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration_adv.h index d5d6eee5c3..5b4e026248 100644 --- a/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration_adv.h +++ b/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Geeetech/A20/Configuration_adv.h b/config/examples/Geeetech/A20/Configuration_adv.h index f25601835d..e475b64039 100644 --- a/config/examples/Geeetech/A20/Configuration_adv.h +++ b/config/examples/Geeetech/A20/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Geeetech/A20M/Configuration_adv.h b/config/examples/Geeetech/A20M/Configuration_adv.h index f25601835d..e475b64039 100644 --- a/config/examples/Geeetech/A20M/Configuration_adv.h +++ b/config/examples/Geeetech/A20M/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Geeetech/A20T/Configuration_adv.h b/config/examples/Geeetech/A20T/Configuration_adv.h index f25601835d..e475b64039 100644 --- a/config/examples/Geeetech/A20T/Configuration_adv.h +++ b/config/examples/Geeetech/A20T/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Geeetech/A30/Configuration_adv.h b/config/examples/Geeetech/A30/Configuration_adv.h index 0ce946efbe..2de41bb219 100644 --- a/config/examples/Geeetech/A30/Configuration_adv.h +++ b/config/examples/Geeetech/A30/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. #define ADVANCED_OK diff --git a/config/examples/Geeetech/A30M/Configuration_adv.h b/config/examples/Geeetech/A30M/Configuration_adv.h index 0ce946efbe..2de41bb219 100644 --- a/config/examples/Geeetech/A30M/Configuration_adv.h +++ b/config/examples/Geeetech/A30M/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. #define ADVANCED_OK diff --git a/config/examples/Geeetech/A30T/Configuration_adv.h b/config/examples/Geeetech/A30T/Configuration_adv.h index 0ce946efbe..2de41bb219 100644 --- a/config/examples/Geeetech/A30T/Configuration_adv.h +++ b/config/examples/Geeetech/A30T/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. #define ADVANCED_OK diff --git a/config/examples/Geeetech/D200/Configuration_adv.h b/config/examples/Geeetech/D200/Configuration_adv.h index c641050387..95edac1d7d 100644 --- a/config/examples/Geeetech/D200/Configuration_adv.h +++ b/config/examples/Geeetech/D200/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. #define ADVANCED_OK diff --git a/config/examples/Geeetech/Duplicator5/Configuration_adv.h b/config/examples/Geeetech/Duplicator5/Configuration_adv.h index 80ce1e7615..e54406e3e9 100644 --- a/config/examples/Geeetech/Duplicator5/Configuration_adv.h +++ b/config/examples/Geeetech/Duplicator5/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Geeetech/E180/Configuration_adv.h b/config/examples/Geeetech/E180/Configuration_adv.h index 0ce946efbe..2de41bb219 100644 --- a/config/examples/Geeetech/E180/Configuration_adv.h +++ b/config/examples/Geeetech/E180/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. #define ADVANCED_OK diff --git a/config/examples/Geeetech/GT2560/Configuration_adv.h b/config/examples/Geeetech/GT2560/Configuration_adv.h index 52c91da588..3cbbe7831d 100644 --- a/config/examples/Geeetech/GT2560/Configuration_adv.h +++ b/config/examples/Geeetech/GT2560/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration_adv.h b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration_adv.h index 52c91da588..3cbbe7831d 100644 --- a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration_adv.h +++ b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Geeetech/M201/Configuration_adv.h b/config/examples/Geeetech/M201/Configuration_adv.h index c641050387..95edac1d7d 100644 --- a/config/examples/Geeetech/M201/Configuration_adv.h +++ b/config/examples/Geeetech/M201/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. #define ADVANCED_OK diff --git a/config/examples/Geeetech/MeCreator2/Configuration_adv.h b/config/examples/Geeetech/MeCreator2/Configuration_adv.h index 18499428c5..c5af97da6e 100644 --- a/config/examples/Geeetech/MeCreator2/Configuration_adv.h +++ b/config/examples/Geeetech/MeCreator2/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Geeetech/Me_creator/Configuration_adv.h b/config/examples/Geeetech/Me_creator/Configuration_adv.h index 80ce1e7615..e54406e3e9 100644 --- a/config/examples/Geeetech/Me_creator/Configuration_adv.h +++ b/config/examples/Geeetech/Me_creator/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Geeetech/Me_ducer/Configuration_adv.h b/config/examples/Geeetech/Me_ducer/Configuration_adv.h index 2c3d8ce73c..b0275971f6 100644 --- a/config/examples/Geeetech/Me_ducer/Configuration_adv.h +++ b/config/examples/Geeetech/Me_ducer/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Geeetech/PI3A PRO/Configuration_adv.h b/config/examples/Geeetech/PI3A PRO/Configuration_adv.h index dc0cd2da11..89a160329a 100644 --- a/config/examples/Geeetech/PI3A PRO/Configuration_adv.h +++ b/config/examples/Geeetech/PI3A PRO/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. #define ADVANCED_OK diff --git a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration_adv.h index 52c91da588..3cbbe7831d 100644 --- a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration_adv.h index 52c91da588..3cbbe7831d 100644 --- a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h index e34dce4f33..5870e050ca 100644 --- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h index e34dce4f33..5870e050ca 100644 --- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/HMS434/Configuration_adv.h b/config/examples/HMS434/Configuration_adv.h index fb78c51b87..b7f9e475d3 100644 --- a/config/examples/HMS434/Configuration_adv.h +++ b/config/examples/HMS434/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 900 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 900 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 900 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 900 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. #define ADVANCED_OK diff --git a/config/examples/Infitary/i3-M508/Configuration_adv.h b/config/examples/Infitary/i3-M508/Configuration_adv.h index df938c4031..1a3b1f83dc 100644 --- a/config/examples/Infitary/i3-M508/Configuration_adv.h +++ b/config/examples/Infitary/i3-M508/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h b/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h index 803e92c8de..19e49a035e 100644 --- a/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h +++ b/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h @@ -303,8 +303,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 15 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 15 // (°C) #define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -326,50 +326,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 30 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 30 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 1 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 1 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 60 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 5 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 60 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 5 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 360 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 360 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2438,7 +2438,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2638,7 +2638,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -#define NO_TIMEOUTS 1000 // Milliseconds +#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. #define ADVANCED_OK diff --git a/config/examples/JGAurora/A1/Configuration_adv.h b/config/examples/JGAurora/A1/Configuration_adv.h index 074cda8a90..fa4a21f328 100644 --- a/config/examples/JGAurora/A1/Configuration_adv.h +++ b/config/examples/JGAurora/A1/Configuration_adv.h @@ -310,8 +310,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -333,50 +333,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2445,7 +2445,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2645,7 +2645,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/JGAurora/A3/Configuration_adv.h b/config/examples/JGAurora/A3/Configuration_adv.h index 52c91da588..3cbbe7831d 100644 --- a/config/examples/JGAurora/A3/Configuration_adv.h +++ b/config/examples/JGAurora/A3/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/JGAurora/A5/Configuration_adv.h b/config/examples/JGAurora/A5/Configuration_adv.h index 0dd72d89e7..c319842766 100644 --- a/config/examples/JGAurora/A5/Configuration_adv.h +++ b/config/examples/JGAurora/A5/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 90 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 90 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/JGAurora/A5S/Configuration_adv.h b/config/examples/JGAurora/A5S/Configuration_adv.h index 4ccb640858..63d08f4779 100644 --- a/config/examples/JGAurora/A5S/Configuration_adv.h +++ b/config/examples/JGAurora/A5S/Configuration_adv.h @@ -310,8 +310,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -333,50 +333,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2445,7 +2445,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2645,7 +2645,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/JGAurora/Magic/Configuration_adv.h b/config/examples/JGAurora/Magic/Configuration_adv.h index c406c2d928..a9c4d6292a 100644 --- a/config/examples/JGAurora/Magic/Configuration_adv.h +++ b/config/examples/JGAurora/Magic/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Kingroon/KP3/Configuration_adv.h b/config/examples/Kingroon/KP3/Configuration_adv.h index 092bae9089..ec96d99d17 100644 --- a/config/examples/Kingroon/KP3/Configuration_adv.h +++ b/config/examples/Kingroon/KP3/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Kingroon/KP3S/Configuration_adv.h b/config/examples/Kingroon/KP3S/Configuration_adv.h index 52c91da588..3cbbe7831d 100644 --- a/config/examples/Kingroon/KP3S/Configuration_adv.h +++ b/config/examples/Kingroon/KP3S/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Kingroon/KP3S_Pro/Configuration_adv.h b/config/examples/Kingroon/KP3S_Pro/Configuration_adv.h index 3f7b1b783d..936722033c 100644 --- a/config/examples/Kingroon/KP3S_Pro/Configuration_adv.h +++ b/config/examples/Kingroon/KP3S_Pro/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Kingroon/KP5L-DIY/Configuration_adv.h b/config/examples/Kingroon/KP5L-DIY/Configuration_adv.h index f298e61bfb..0bda88fe93 100644 --- a/config/examples/Kingroon/KP5L-DIY/Configuration_adv.h +++ b/config/examples/Kingroon/KP5L-DIY/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 8 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 8 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 25 // Seconds - #define WATCH_TEMP_INCREASE 5 // Degrees Celsius + #define WATCH_TEMP_PERIOD 25 // (seconds) + #define WATCH_TEMP_INCREASE 5 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 4 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 40 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 5 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 40 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 5 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Labists/ET4/Configuration_adv.h b/config/examples/Labists/ET4/Configuration_adv.h index c0f16ca2ea..cb17925399 100644 --- a/config/examples/Labists/ET4/Configuration_adv.h +++ b/config/examples/Labists/ET4/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Longer/LK5/Configuration_adv.h b/config/examples/Longer/LK5/Configuration_adv.h index 17d8214e27..74744d78bf 100644 --- a/config/examples/Longer/LK5/Configuration_adv.h +++ b/config/examples/Longer/LK5/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 60 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 10 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 60 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 10 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 60 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 60 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 120 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 120 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/LulzBot/Mini2/Teensy/Configuration_adv.h b/config/examples/LulzBot/Mini2/Teensy/Configuration_adv.h index 01c8b6aea5..71ba091a7e 100644 --- a/config/examples/LulzBot/Mini2/Teensy/Configuration_adv.h +++ b/config/examples/LulzBot/Mini2/Teensy/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2443,7 +2443,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2643,7 +2643,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. #define ADVANCED_OK diff --git a/config/examples/LulzBot/TAZ4/Configuration_adv.h b/config/examples/LulzBot/TAZ4/Configuration_adv.h index fe9ad7a395..4ee8c3f8b3 100644 --- a/config/examples/LulzBot/TAZ4/Configuration_adv.h +++ b/config/examples/LulzBot/TAZ4/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/MBot/Cube/Configuration_adv.h b/config/examples/MBot/Cube/Configuration_adv.h index 1567730b9f..f50d21ab74 100644 --- a/config/examples/MBot/Cube/Configuration_adv.h +++ b/config/examples/MBot/Cube/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h b/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h index 5df277c7af..1723b69ad4 100644 --- a/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h +++ b/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2634,7 +2634,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. #define ADVANCED_OK diff --git a/config/examples/MakerParts/Configuration_adv.h b/config/examples/MakerParts/Configuration_adv.h index a699cfbc2c..6f51149193 100644 --- a/config/examples/MakerParts/Configuration_adv.h +++ b/config/examples/MakerParts/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 180 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 180 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/MakerTech3D/Proforge2sDual/Configuration_adv.h b/config/examples/MakerTech3D/Proforge2sDual/Configuration_adv.h index ae260b875f..b35db69197 100644 --- a/config/examples/MakerTech3D/Proforge2sDual/Configuration_adv.h +++ b/config/examples/MakerTech3D/Proforge2sDual/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Malyan/M150/Configuration_adv.h b/config/examples/Malyan/M150/Configuration_adv.h index 3b11628f3c..a9247efe2f 100644 --- a/config/examples/Malyan/M150/Configuration_adv.h +++ b/config/examples/Malyan/M150/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 120 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 120 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Malyan/M180/Configuration_adv.h b/config/examples/Malyan/M180/Configuration_adv.h index 52c91da588..3cbbe7831d 100644 --- a/config/examples/Malyan/M180/Configuration_adv.h +++ b/config/examples/Malyan/M180/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Malyan/M200/Configuration_adv.h b/config/examples/Malyan/M200/Configuration_adv.h index 66b5e052fa..b38cbe7537 100644 --- a/config/examples/Malyan/M200/Configuration_adv.h +++ b/config/examples/Malyan/M200/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 50 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 50 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2441,7 +2441,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2641,7 +2641,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Micromake/C1/basic/Configuration_adv.h b/config/examples/Micromake/C1/basic/Configuration_adv.h index 0775b3e027..411d53b10f 100644 --- a/config/examples/Micromake/C1/basic/Configuration_adv.h +++ b/config/examples/Micromake/C1/basic/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/config/examples/Micromake/C1/enhanced/Configuration_adv.h index d250e62e01..ee9e786205 100644 --- a/config/examples/Micromake/C1/enhanced/Configuration_adv.h +++ b/config/examples/Micromake/C1/enhanced/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Mks/Robin/Configuration_adv.h b/config/examples/Mks/Robin/Configuration_adv.h index 52c91da588..3cbbe7831d 100644 --- a/config/examples/Mks/Robin/Configuration_adv.h +++ b/config/examples/Mks/Robin/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Mks/Robin_Lite3/Configuration_adv.h b/config/examples/Mks/Robin_Lite3/Configuration_adv.h index 53799ba4ff..ab1a98ab23 100644 --- a/config/examples/Mks/Robin_Lite3/Configuration_adv.h +++ b/config/examples/Mks/Robin_Lite3/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Mks/Robin_Pro/Configuration_adv.h b/config/examples/Mks/Robin_Pro/Configuration_adv.h index 52c91da588..3cbbe7831d 100644 --- a/config/examples/Mks/Robin_Pro/Configuration_adv.h +++ b/config/examples/Mks/Robin_Pro/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Mks/Sbase/Configuration_adv.h b/config/examples/Mks/Sbase/Configuration_adv.h index d679b91cc7..3d26c3fa6a 100644 --- a/config/examples/Mks/Sbase/Configuration_adv.h +++ b/config/examples/Mks/Sbase/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 50 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 6 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 50 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 6 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 110 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 110 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 4 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 100 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 100 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Modix/Big60/Configuration_adv.h b/config/examples/Modix/Big60/Configuration_adv.h index 2ae1782cac..82908f88e1 100644 --- a/config/examples/Modix/Big60/Configuration_adv.h +++ b/config/examples/Modix/Big60/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 10 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 10 // (°C) #define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -#define NO_TIMEOUTS 1000 // Milliseconds +#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. #define ADVANCED_OK diff --git a/config/examples/Nextion/Configuration_adv.h b/config/examples/Nextion/Configuration_adv.h index 38450b8bdb..81b486c7a8 100644 --- a/config/examples/Nextion/Configuration_adv.h +++ b/config/examples/Nextion/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/ORD Bot/Hadron/Sanguinololu/Configuration_adv.h b/config/examples/ORD Bot/Hadron/Sanguinololu/Configuration_adv.h index 0194863e64..74eb5f12d5 100644 --- a/config/examples/ORD Bot/Hadron/Sanguinololu/Configuration_adv.h +++ b/config/examples/ORD Bot/Hadron/Sanguinololu/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Opulo/Lumen_REV3/Configuration_adv.h b/config/examples/Opulo/Lumen_REV3/Configuration_adv.h index 5e2c508a21..b8ff3c072b 100644 --- a/config/examples/Opulo/Lumen_REV3/Configuration_adv.h +++ b/config/examples/Opulo/Lumen_REV3/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Opulo/Lumen_REV4/Configuration_adv.h b/config/examples/Opulo/Lumen_REV4/Configuration_adv.h index f2255b599c..c180ae9854 100644 --- a/config/examples/Opulo/Lumen_REV4/Configuration_adv.h +++ b/config/examples/Opulo/Lumen_REV4/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2438,7 +2438,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2638,7 +2638,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Ortur 4/Configuration_adv.h b/config/examples/Ortur 4/Configuration_adv.h index 3dc71843ac..109fdd96ce 100644 --- a/config/examples/Ortur 4/Configuration_adv.h +++ b/config/examples/Ortur 4/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 60 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 5 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 60 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 5 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 90 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 90 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 90 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 90 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 90 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 90 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2440,7 +2440,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2640,7 +2640,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Polargraph/Configuration_adv.h b/config/examples/Polargraph/Configuration_adv.h index 53d37bdd0e..7cf9605d66 100644 --- a/config/examples/Polargraph/Configuration_adv.h +++ b/config/examples/Polargraph/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Printrbot/PrintrboardG2/Configuration_adv.h b/config/examples/Printrbot/PrintrboardG2/Configuration_adv.h index 52c91da588..3cbbe7831d 100644 --- a/config/examples/Printrbot/PrintrboardG2/Configuration_adv.h +++ b/config/examples/Printrbot/PrintrboardG2/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Printrbot/Simple Metal RevD/Configuration_adv.h b/config/examples/Printrbot/Simple Metal RevD/Configuration_adv.h index 52c91da588..3cbbe7831d 100644 --- a/config/examples/Printrbot/Simple Metal RevD/Configuration_adv.h +++ b/config/examples/Printrbot/Simple Metal RevD/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Prusa/MK3/Configuration_adv.h b/config/examples/Prusa/MK3/Configuration_adv.h index 9f05808f45..64be8346ee 100644 --- a/config/examples/Prusa/MK3/Configuration_adv.h +++ b/config/examples/Prusa/MK3/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 45 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 10 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 45 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 10 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 360 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 5 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 360 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 5 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 180 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 180 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2441,7 +2441,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2641,7 +2641,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. #define ADVANCED_OK diff --git a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h index 340f64a88c..39381c40bf 100644 --- a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h +++ b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 8 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 8 // (°C) #define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 8 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 8 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 8 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 8 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 8 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 8 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2440,7 +2440,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2640,7 +2640,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Qidi/Qidi 1/Configuration_adv.h b/config/examples/Qidi/Qidi 1/Configuration_adv.h index 71ac52765c..b00de6a2e8 100644 --- a/config/examples/Qidi/Qidi 1/Configuration_adv.h +++ b/config/examples/Qidi/Qidi 1/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 120 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 5 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 120 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 5 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 120 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 120 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 60 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 60 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Raiscube/A8r/Configuration_adv.h b/config/examples/Raiscube/A8r/Configuration_adv.h index 6b517bae29..1802de74ab 100644 --- a/config/examples/Raiscube/A8r/Configuration_adv.h +++ b/config/examples/Raiscube/A8r/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 60 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 10 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 60 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 10 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 60 // Seconds - #define WATCH_TEMP_INCREASE 5 // Degrees Celsius + #define WATCH_TEMP_PERIOD 60 // (seconds) + #define WATCH_TEMP_INCREASE 5 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 60 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 5 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 60 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 5 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 180 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 180 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/RapideLite/RL200/Configuration_adv.h b/config/examples/RapideLite/RL200/Configuration_adv.h index 80ce1e7615..e54406e3e9 100644 --- a/config/examples/RapideLite/RL200/Configuration_adv.h +++ b/config/examples/RapideLite/RL200/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Renkforce/RF100/Configuration_adv.h b/config/examples/Renkforce/RF100/Configuration_adv.h index 8c87570839..cf24c45146 100644 --- a/config/examples/Renkforce/RF100/Configuration_adv.h +++ b/config/examples/Renkforce/RF100/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Renkforce/RF100XL/Configuration_adv.h b/config/examples/Renkforce/RF100XL/Configuration_adv.h index 8c87570839..cf24c45146 100644 --- a/config/examples/Renkforce/RF100XL/Configuration_adv.h +++ b/config/examples/Renkforce/RF100XL/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Renkforce/RF100v2/Configuration_adv.h b/config/examples/Renkforce/RF100v2/Configuration_adv.h index 8c87570839..cf24c45146 100644 --- a/config/examples/Renkforce/RF100v2/Configuration_adv.h +++ b/config/examples/Renkforce/RF100v2/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/RepRapPro/Huxley/Configuration_adv.h b/config/examples/RepRapPro/Huxley/Configuration_adv.h index 52c91da588..3cbbe7831d 100644 --- a/config/examples/RepRapPro/Huxley/Configuration_adv.h +++ b/config/examples/RepRapPro/Huxley/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/RepRapWorld/Megatronics/Configuration_adv.h b/config/examples/RepRapWorld/Megatronics/Configuration_adv.h index 52c91da588..3cbbe7831d 100644 --- a/config/examples/RepRapWorld/Megatronics/Configuration_adv.h +++ b/config/examples/RepRapWorld/Megatronics/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/RepRapWorld/Minitronics20/CNC/Configuration_adv.h b/config/examples/RepRapWorld/Minitronics20/CNC/Configuration_adv.h index e917e5d72f..80bf6d6fde 100644 --- a/config/examples/RepRapWorld/Minitronics20/CNC/Configuration_adv.h +++ b/config/examples/RepRapWorld/Minitronics20/CNC/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/RigidBot/Configuration_adv.h b/config/examples/RigidBot/Configuration_adv.h index d46be55b05..63d968adc8 100644 --- a/config/examples/RigidBot/Configuration_adv.h +++ b/config/examples/RigidBot/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Robo3D/R1+/Configuration_adv.h b/config/examples/Robo3D/R1+/Configuration_adv.h index 52c91da588..3cbbe7831d 100644 --- a/config/examples/Robo3D/R1+/Configuration_adv.h +++ b/config/examples/Robo3D/R1+/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/SCARA/MP_SCARA/Configuration_adv.h b/config/examples/SCARA/MP_SCARA/Configuration_adv.h index 2d7b0aa3dd..934e5b9262 100644 --- a/config/examples/SCARA/MP_SCARA/Configuration_adv.h +++ b/config/examples/SCARA/MP_SCARA/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/SCARA/Morgan/Configuration_adv.h b/config/examples/SCARA/Morgan/Configuration_adv.h index b71e719f64..ca22915eff 100644 --- a/config/examples/SCARA/Morgan/Configuration_adv.h +++ b/config/examples/SCARA/Morgan/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h index aec20a7657..4d435cccfa 100644 --- a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h +++ b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/STM32/STM32F103RE/Configuration_adv.h b/config/examples/STM32/STM32F103RE/Configuration_adv.h index 52c91da588..3cbbe7831d 100644 --- a/config/examples/STM32/STM32F103RE/Configuration_adv.h +++ b/config/examples/STM32/STM32F103RE/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Simax/Mi-M200/Configuration_adv.h b/config/examples/Simax/Mi-M200/Configuration_adv.h index 6d5d7c862a..3681871038 100644 --- a/config/examples/Simax/Mi-M200/Configuration_adv.h +++ b/config/examples/Simax/Mi-M200/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 180 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 180 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 180 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 180 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2440,7 +2440,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2640,7 +2640,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Simulator/Configuration_adv.h b/config/examples/Simulator/Configuration_adv.h index d455adf07c..d0ecb57786 100644 --- a/config/examples/Simulator/Configuration_adv.h +++ b/config/examples/Simulator/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. #define ADVANCED_OK diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration_adv.h b/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration_adv.h index 7ca3d57841..55db4fbe75 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2440,7 +2440,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2640,7 +2640,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 14985cc476..6db585f47d 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2440,7 +2440,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2640,7 +2640,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h index 2f42ecc77b..4186a0384e 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h b/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h index b48a9d56ea..baae2ff22f 100644 --- a/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2441,7 +2441,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2641,7 +2641,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h b/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h index 4b79026a12..654f46e435 100644 --- a/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2441,7 +2441,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2641,7 +2641,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Sovol/SV-02/Configuration_adv.h b/config/examples/Sovol/SV-02/Configuration_adv.h index 9d45114387..6560ac7fef 100644 --- a/config/examples/Sovol/SV-02/Configuration_adv.h +++ b/config/examples/Sovol/SV-02/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2441,7 +2441,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2641,7 +2641,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Sovol/SV-03/Configuration_adv.h b/config/examples/Sovol/SV-03/Configuration_adv.h index c223613068..df4f5eaa37 100644 --- a/config/examples/Sovol/SV-03/Configuration_adv.h +++ b/config/examples/Sovol/SV-03/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Sunlu/S8/Configuration_adv.h b/config/examples/Sunlu/S8/Configuration_adv.h index 8262bcfc15..8f6b70d08d 100644 --- a/config/examples/Sunlu/S8/Configuration_adv.h +++ b/config/examples/Sunlu/S8/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 60 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 15 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 60 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 15 // (°C) #define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -#define NO_TIMEOUTS 1000 // Milliseconds +#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. #define ADVANCED_OK diff --git a/config/examples/Sunlu/T3/Configuration_adv.h b/config/examples/Sunlu/T3/Configuration_adv.h index 355b1953db..2c00becbbd 100644 --- a/config/examples/Sunlu/T3/Configuration_adv.h +++ b/config/examples/Sunlu/T3/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 20 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. #define ADVANCED_OK diff --git a/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h b/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h index 0af96bf8a3..62f2db7027 100644 --- a/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h +++ b/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Tevo/Michelangelo/Configuration_adv.h b/config/examples/Tevo/Michelangelo/Configuration_adv.h index 67a45be6e4..bf85f0fe20 100644 --- a/config/examples/Tevo/Michelangelo/Configuration_adv.h +++ b/config/examples/Tevo/Michelangelo/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Tevo/Nereus/Configuration_adv.h b/config/examples/Tevo/Nereus/Configuration_adv.h index 2725eb443f..57634afb3e 100644 --- a/config/examples/Tevo/Nereus/Configuration_adv.h +++ b/config/examples/Tevo/Nereus/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Tevo/Tarantula Pro/MKS Gen_L/Configuration_adv.h b/config/examples/Tevo/Tarantula Pro/MKS Gen_L/Configuration_adv.h index d0b0cf69c4..8b38e526ba 100644 --- a/config/examples/Tevo/Tarantula Pro/MKS Gen_L/Configuration_adv.h +++ b/config/examples/Tevo/Tarantula Pro/MKS Gen_L/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Tevo/Tarantula Pro/MKS SGen_L/Configuration_adv.h b/config/examples/Tevo/Tarantula Pro/MKS SGen_L/Configuration_adv.h index cc606c3a10..993d56f995 100644 --- a/config/examples/Tevo/Tarantula Pro/MKS SGen_L/Configuration_adv.h +++ b/config/examples/Tevo/Tarantula Pro/MKS SGen_L/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h index 698b6c2cb7..b582040685 100644 --- a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h +++ b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Tevo/Tornado/V2 (MKS Gen_L)/Configuration_adv.h b/config/examples/Tevo/Tornado/V2 (MKS Gen_L)/Configuration_adv.h index 698b6c2cb7..b582040685 100644 --- a/config/examples/Tevo/Tornado/V2 (MKS Gen_L)/Configuration_adv.h +++ b/config/examples/Tevo/Tornado/V2 (MKS Gen_L)/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration_adv.h b/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration_adv.h index d567262766..a0c54bf240 100644 --- a/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration_adv.h +++ b/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. #define ADVANCED_OK diff --git a/config/examples/TinyBoy2/Configuration_adv.h b/config/examples/TinyBoy2/Configuration_adv.h index ee611e529f..797cf50bc2 100644 --- a/config/examples/TinyBoy2/Configuration_adv.h +++ b/config/examples/TinyBoy2/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Tronxy/D01/CXY-v6-191017 board/Configuration_adv.h b/config/examples/Tronxy/D01/CXY-v6-191017 board/Configuration_adv.h index dc90d69bf3..cfbf646dee 100644 --- a/config/examples/Tronxy/D01/CXY-v6-191017 board/Configuration_adv.h +++ b/config/examples/Tronxy/D01/CXY-v6-191017 board/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Tronxy/X1/Configuration_adv.h b/config/examples/Tronxy/X1/Configuration_adv.h index 52c91da588..3cbbe7831d 100644 --- a/config/examples/Tronxy/X1/Configuration_adv.h +++ b/config/examples/Tronxy/X1/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Tronxy/X3A/Configuration_adv.h b/config/examples/Tronxy/X3A/Configuration_adv.h index 7675898ff9..172b9c538a 100644 --- a/config/examples/Tronxy/X3A/Configuration_adv.h +++ b/config/examples/Tronxy/X3A/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 10 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 10 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 10 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 10 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration_adv.h b/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration_adv.h index e0bff47cb8..ec1f322611 100644 --- a/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration_adv.h +++ b/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration_adv.h b/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration_adv.h index 9ef264aa39..4c7a27ebdd 100644 --- a/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration_adv.h +++ b/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 30 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 30 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Tronxy/X5S/Configuration_adv.h b/config/examples/Tronxy/X5S/Configuration_adv.h index 52c91da588..3cbbe7831d 100644 --- a/config/examples/Tronxy/X5S/Configuration_adv.h +++ b/config/examples/Tronxy/X5S/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Tronxy/X5SA-2E/Configuration_adv.h b/config/examples/Tronxy/X5SA-2E/Configuration_adv.h index 72b8562e97..0885fb657d 100644 --- a/config/examples/Tronxy/X5SA-2E/Configuration_adv.h +++ b/config/examples/Tronxy/X5SA-2E/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2443,7 +2443,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2643,7 +2643,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Tronxy/X5SA/Configuration_adv.h b/config/examples/Tronxy/X5SA/Configuration_adv.h index 7bf66b10b0..83de6b478e 100644 --- a/config/examples/Tronxy/X5SA/Configuration_adv.h +++ b/config/examples/Tronxy/X5SA/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2443,7 +2443,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2643,7 +2643,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Tronxy/XY100/Configuration_adv.h b/config/examples/Tronxy/XY100/Configuration_adv.h index 52c91da588..3cbbe7831d 100644 --- a/config/examples/Tronxy/XY100/Configuration_adv.h +++ b/config/examples/Tronxy/XY100/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Tronxy/XY2-Pro/Configuration_adv.h b/config/examples/Tronxy/XY2-Pro/Configuration_adv.h index 5c994ffb2e..c7b6fbfeb6 100644 --- a/config/examples/Tronxy/XY2-Pro/Configuration_adv.h +++ b/config/examples/Tronxy/XY2-Pro/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Two Trees/BlueR Plus/Configuration_adv.h b/config/examples/Two Trees/BlueR Plus/Configuration_adv.h index b0946f2927..28ca573399 100644 --- a/config/examples/Two Trees/BlueR Plus/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR Plus/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 5 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 5 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2438,7 +2438,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2638,7 +2638,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h b/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h index a53c8e350b..1d6e8939a1 100644 --- a/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 5 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 5 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2440,7 +2440,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2640,7 +2640,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h b/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h index a53c8e350b..1d6e8939a1 100644 --- a/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 5 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 5 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2440,7 +2440,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2640,7 +2640,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h b/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h index a53c8e350b..1d6e8939a1 100644 --- a/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 5 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 5 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2440,7 +2440,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2640,7 +2640,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration_adv.h b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration_adv.h index 8e9fbc4501..207dbb953b 100644 --- a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration_adv.h +++ b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 5 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 5 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2445,7 +2445,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2645,7 +2645,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. #define ADVANCED_OK diff --git a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h index caedf28b64..bfaa7bd556 100644 --- a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h +++ b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 5 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 5 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2445,7 +2445,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2645,7 +2645,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. #define ADVANCED_OK diff --git a/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h b/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h index 74fa0cf5cd..b14fb22280 100644 --- a/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h +++ b/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 4 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 4 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2440,7 +2440,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2640,7 +2640,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/UltiMachine/Archim1/Configuration_adv.h b/config/examples/UltiMachine/Archim1/Configuration_adv.h index fa67b9152d..47f58a2fd1 100644 --- a/config/examples/UltiMachine/Archim1/Configuration_adv.h +++ b/config/examples/UltiMachine/Archim1/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/UltiMachine/Archim2/Configuration_adv.h b/config/examples/UltiMachine/Archim2/Configuration_adv.h index 66bc84c6cd..77aa0b49c6 100644 --- a/config/examples/UltiMachine/Archim2/Configuration_adv.h +++ b/config/examples/UltiMachine/Archim2/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Ultimaker/Ultimaker 2+/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker 2+/Configuration_adv.h index f88318de56..2476865d1a 100644 --- a/config/examples/Ultimaker/Ultimaker 2+/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker 2+/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. #define ADVANCED_OK diff --git a/config/examples/Ultimaker/Ultimaker 2/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker 2/Configuration_adv.h index 93bdfc3e03..1faa4c7e64 100644 --- a/config/examples/Ultimaker/Ultimaker 2/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker 2/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h index b83b7680ff..b6df82025e 100644 --- a/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration_adv.h index bafff15a02..0317b600ab 100644 --- a/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. #define ADVANCED_OK diff --git a/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration_adv.h index c3a6223277..b46ad24c30 100644 --- a/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 10 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 10 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2437,7 +2437,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2637,7 +2637,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. #define ADVANCED_OK diff --git a/config/examples/VORONDesign/Configuration_adv.h b/config/examples/VORONDesign/Configuration_adv.h index 0939469bec..737a37f955 100644 --- a/config/examples/VORONDesign/Configuration_adv.h +++ b/config/examples/VORONDesign/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Velleman/K8200 Upgraded/Configuration_adv.h b/config/examples/Velleman/K8200 Upgraded/Configuration_adv.h index a11e149a58..9dd58486d9 100644 --- a/config/examples/Velleman/K8200 Upgraded/Configuration_adv.h +++ b/config/examples/Velleman/K8200 Upgraded/Configuration_adv.h @@ -314,8 +314,8 @@ */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) // K8200 has weak heaters/power supply by default, so you have to relax! - #define THERMAL_PROTECTION_PERIOD 60 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 8 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 60 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 8 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -338,8 +338,8 @@ * below 2. */ // K8200 has weak heaters/power supply by default, so you have to relax! - #define WATCH_TEMP_PERIOD 30 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 30 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** @@ -348,42 +348,42 @@ #if ENABLED(THERMAL_PROTECTION_BED) // K8200 has weak heaters/power supply by default, so you have to relax! // the default bed is so weak, that you can hardly go over 75°C - #define THERMAL_PROTECTION_BED_PERIOD 60 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 10 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 60 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 10 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2452,7 +2452,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2652,7 +2652,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Velleman/K8200/Configuration_adv.h b/config/examples/Velleman/K8200/Configuration_adv.h index 8ce908ffbf..a8b13c0142 100644 --- a/config/examples/Velleman/K8200/Configuration_adv.h +++ b/config/examples/Velleman/K8200/Configuration_adv.h @@ -314,8 +314,8 @@ */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) // K8200 has weak heaters/power supply by default, so you have to relax! - #define THERMAL_PROTECTION_PERIOD 60 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 8 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 60 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 8 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -338,8 +338,8 @@ * below 2. */ // K8200 has weak heaters/power supply by default, so you have to relax! - #define WATCH_TEMP_PERIOD 30 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 30 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** @@ -348,42 +348,42 @@ #if ENABLED(THERMAL_PROTECTION_BED) // K8200 has weak heaters/power supply by default, so you have to relax! // the default bed is so weak, that you can hardly go over 75°C - #define THERMAL_PROTECTION_BED_PERIOD 60 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 10 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 60 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 10 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2452,7 +2452,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2652,7 +2652,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h b/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h index c202c0dc45..9906b2f493 100644 --- a/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h +++ b/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Velleman/K8400/Single-head/Configuration_adv.h b/config/examples/Velleman/K8400/Single-head/Configuration_adv.h index c202c0dc45..9906b2f493 100644 --- a/config/examples/Velleman/K8400/Single-head/Configuration_adv.h +++ b/config/examples/Velleman/K8400/Single-head/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Voxelab/Aquila/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Voxelab/Aquila/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index c8a0c93919..d429d573cd 100644 --- a/config/examples/Voxelab/Aquila/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Voxelab/Aquila/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/WASP/PowerWASP/Configuration_adv.h b/config/examples/WASP/PowerWASP/Configuration_adv.h index 3f64c82b6c..315ac59de0 100644 --- a/config/examples/WASP/PowerWASP/Configuration_adv.h +++ b/config/examples/WASP/PowerWASP/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h b/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h index b13e34a6c5..746436c999 100644 --- a/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 60 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 60 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 60 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 60 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h index f29cd91643..8a3d7c2c4b 100644 --- a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 60 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 60 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 90 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 90 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 90 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 90 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2441,7 +2441,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2641,7 +2641,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h index ed4b5ec2c2..ce1bfbebd7 100644 --- a/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h index db89329e9c..dbe1d4d196 100644 --- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Wanhao/Duplicator i3 Plus/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 Plus/Configuration_adv.h index 52c91da588..3cbbe7831d 100644 --- a/config/examples/Wanhao/Duplicator i3 Plus/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 Plus/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Weedo/Tina2/V2/Configuration_adv.h b/config/examples/Weedo/Tina2/V2/Configuration_adv.h index 7125f554b6..17b04c2f46 100644 --- a/config/examples/Weedo/Tina2/V2/Configuration_adv.h +++ b/config/examples/Weedo/Tina2/V2/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Weedo/Tina2/V3/Configuration_adv.h b/config/examples/Weedo/Tina2/V3/Configuration_adv.h index 7125f554b6..17b04c2f46 100644 --- a/config/examples/Weedo/Tina2/V3/Configuration_adv.h +++ b/config/examples/Weedo/Tina2/V3/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Weistek/wt150/Configuration_adv.h b/config/examples/Weistek/wt150/Configuration_adv.h index e1797d83e1..78eefd376b 100644 --- a/config/examples/Weistek/wt150/Configuration_adv.h +++ b/config/examples/Weistek/wt150/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Zonestar/P802M/Configuration_adv.h b/config/examples/Zonestar/P802M/Configuration_adv.h index 0c8cc74414..02ac5f236f 100644 --- a/config/examples/Zonestar/P802M/Configuration_adv.h +++ b/config/examples/Zonestar/P802M/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 60 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 5 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 60 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 5 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 180 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 180 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h index 84db2278d5..468fd56a7f 100644 --- a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h +++ b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 90 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 90 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h index ef3074f557..6cf6f7eb00 100755 --- a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h +++ b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 90 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 90 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h index 1ba04c1656..1cecd05691 100644 --- a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2441,7 +2441,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2641,7 +2641,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h index 6641ed35d5..1a5e0df66e 100644 --- a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2440,7 +2440,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2640,7 +2640,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/delta/Anycubic/Predator/Configuration_adv.h b/config/examples/delta/Anycubic/Predator/Configuration_adv.h index 5875701f10..874cf42dfc 100644 --- a/config/examples/delta/Anycubic/Predator/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Predator/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2442,7 +2442,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2642,7 +2642,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h index 0b2fad0c96..3059201f3c 100644 --- a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h +++ b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2440,7 +2440,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2640,7 +2640,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h index 0b2fad0c96..3059201f3c 100644 --- a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h +++ b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2440,7 +2440,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2640,7 +2640,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h index dc9749af74..86e797037b 100644 --- a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h +++ b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2440,7 +2440,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2640,7 +2640,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/delta/FLSUN/Q5-nano_v2/Configuration_adv.h b/config/examples/delta/FLSUN/Q5-nano_v2/Configuration_adv.h index 52c91da588..3cbbe7831d 100644 --- a/config/examples/delta/FLSUN/Q5-nano_v2/Configuration_adv.h +++ b/config/examples/delta/FLSUN/Q5-nano_v2/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h b/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h index db64e88ee9..78a50592b2 100644 --- a/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h +++ b/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2440,7 +2440,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2640,7 +2640,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h b/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h index 6768ff4f13..0309307611 100644 --- a/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h +++ b/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 6 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 6 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2441,7 +2441,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2641,7 +2641,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h index d1bfd38a89..478a5c4785 100644 --- a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h +++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2440,7 +2440,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2640,7 +2640,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/delta/FLSUN/kossel/Configuration_adv.h b/config/examples/delta/FLSUN/kossel/Configuration_adv.h index d1bfd38a89..478a5c4785 100644 --- a/config/examples/delta/FLSUN/kossel/Configuration_adv.h +++ b/config/examples/delta/FLSUN/kossel/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2440,7 +2440,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2640,7 +2640,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h index 580d8779ed..40b5e26537 100644 --- a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h +++ b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2440,7 +2440,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2640,7 +2640,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/delta/Geeetech/G2/Configuration_adv.h b/config/examples/delta/Geeetech/G2/Configuration_adv.h index 1c587229dd..03387542ca 100644 --- a/config/examples/delta/Geeetech/G2/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2440,7 +2440,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2640,7 +2640,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. #define ADVANCED_OK diff --git a/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h b/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h index 1c587229dd..03387542ca 100644 --- a/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2440,7 +2440,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2640,7 +2640,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. #define ADVANCED_OK diff --git a/config/examples/delta/Geeetech/G2S/Configuration_adv.h b/config/examples/delta/Geeetech/G2S/Configuration_adv.h index 1c587229dd..03387542ca 100644 --- a/config/examples/delta/Geeetech/G2S/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2S/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2440,7 +2440,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2640,7 +2640,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. #define ADVANCED_OK diff --git a/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h b/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h index 1c587229dd..03387542ca 100644 --- a/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2440,7 +2440,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2640,7 +2640,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. #define ADVANCED_OK diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h index 4104401279..0f4d760bf2 100644 --- a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h +++ b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -328,49 +328,49 @@ * below 2. */ #define WATCH_TEMP_PERIOD 60 // Seconds, heating is quite slow in Rostock 301 - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2440,7 +2440,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2640,7 +2640,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h b/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h index 37702e49a5..41314e2c14 100644 --- a/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h +++ b/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2440,7 +2440,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2640,7 +2640,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/delta/MKS/SBASE/Configuration_adv.h b/config/examples/delta/MKS/SBASE/Configuration_adv.h index 7b2121e1ea..6329379144 100644 --- a/config/examples/delta/MKS/SBASE/Configuration_adv.h +++ b/config/examples/delta/MKS/SBASE/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 50 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 6 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 50 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 6 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 110 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 110 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 4 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 100 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 100 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2440,7 +2440,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2640,7 +2640,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/delta/Malyan M300/Configuration_adv.h b/config/examples/delta/Malyan M300/Configuration_adv.h index 119e1879c7..365f9f5a45 100644 --- a/config/examples/delta/Malyan M300/Configuration_adv.h +++ b/config/examples/delta/Malyan M300/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2440,7 +2440,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2640,7 +2640,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/delta/Tevo Little Monster/Configuration_adv.h b/config/examples/delta/Tevo Little Monster/Configuration_adv.h index 682d490e3e..0d1eeed77e 100644 --- a/config/examples/delta/Tevo Little Monster/Configuration_adv.h +++ b/config/examples/delta/Tevo Little Monster/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2440,7 +2440,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2640,7 +2640,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/delta/Velleman/K8800/Configuration_adv.h b/config/examples/delta/Velleman/K8800/Configuration_adv.h index 89984efbf0..0860e1e3ef 100644 --- a/config/examples/delta/Velleman/K8800/Configuration_adv.h +++ b/config/examples/delta/Velleman/K8800/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) #define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 60 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 60 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 30 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 30 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2441,7 +2441,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2641,7 +2641,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/delta/generic/Configuration_adv.h b/config/examples/delta/generic/Configuration_adv.h index 580d8779ed..40b5e26537 100644 --- a/config/examples/delta/generic/Configuration_adv.h +++ b/config/examples/delta/generic/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2440,7 +2440,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2640,7 +2640,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/delta/kossel_clear/Configuration_adv.h b/config/examples/delta/kossel_clear/Configuration_adv.h index 3b1abb1d49..224a87d8ca 100644 --- a/config/examples/delta/kossel_clear/Configuration_adv.h +++ b/config/examples/delta/kossel_clear/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2440,7 +2440,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2640,7 +2640,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. #define ADVANCED_OK diff --git a/config/examples/delta/kossel_mini/Configuration_adv.h b/config/examples/delta/kossel_mini/Configuration_adv.h index 52c91da588..3cbbe7831d 100644 --- a/config/examples/delta/kossel_mini/Configuration_adv.h +++ b/config/examples/delta/kossel_mini/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/delta/kossel_pro/Configuration_adv.h b/config/examples/delta/kossel_pro/Configuration_adv.h index 52c91da588..3cbbe7831d 100644 --- a/config/examples/delta/kossel_pro/Configuration_adv.h +++ b/config/examples/delta/kossel_pro/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/delta/kossel_xl/Configuration_adv.h b/config/examples/delta/kossel_xl/Configuration_adv.h index 9293dd462e..084efa60b3 100644 --- a/config/examples/delta/kossel_xl/Configuration_adv.h +++ b/config/examples/delta/kossel_xl/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2440,7 +2440,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2640,7 +2640,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/config/examples/gCreate/gMax1.5+/Configuration_adv.h index 805bc1af01..9e383b4519 100644 --- a/config/examples/gCreate/gMax1.5+/Configuration_adv.h +++ b/config/examples/gCreate/gMax1.5+/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 50 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 50 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 3 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 50 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 50 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 50 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 50 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration_adv.h b/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration_adv.h index 0383b5af17..b20de96067 100644 --- a/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration_adv.h +++ b/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration_adv.h b/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration_adv.h index 3c3ad371dc..dc36714047 100644 --- a/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration_adv.h +++ b/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/makibox/Configuration_adv.h b/config/examples/makibox/Configuration_adv.h index 2f640ae897..33b07278c5 100644 --- a/config/examples/makibox/Configuration_adv.h +++ b/config/examples/makibox/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK diff --git a/config/examples/tvrrug/Round2/Configuration_adv.h b/config/examples/tvrrug/Round2/Configuration_adv.h index c1036c437b..79cfb64764 100644 --- a/config/examples/tvrrug/Round2/Configuration_adv.h +++ b/config/examples/tvrrug/Round2/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2439,7 +2439,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2639,7 +2639,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK