mirror of
https://github.com/MarlinFirmware/Configurations.git
synced 2025-08-09 14:55:10 -06:00
🔧 Improve Thinker SE and V2 (#577)
This commit is contained in:
Eryone
GitHub
parent
0033652e79
commit
6d77b2c0bd
4 changed files with 130 additions and 35 deletions
|
|
@ -21,7 +21,9 @@
|
|||
*/
|
||||
#pragma once
|
||||
|
||||
#define THINKERV2_BLTOUCH // Enable for an installed BLTOUCH
|
||||
//#define THINKERV2_BLTOUCH // Enable for an installed BLTOUCH
|
||||
//#define THINKERV2_FL //Enable for an installed Filament runout sensor
|
||||
//#define THINKERV2_Direct //Enable for Direct drive extruder system
|
||||
|
||||
/**
|
||||
* Configuration.h
|
||||
|
|
@ -71,7 +73,7 @@
|
|||
// @section info
|
||||
|
||||
// Author info of this build printed to the host during boot and M115
|
||||
#define STRING_CONFIG_H_AUTHOR "(Dana Olson, BLTouch+Runout)" // Who made the changes.
|
||||
#define STRING_CONFIG_H_AUTHOR "(Dana Olson&Eryone, All in one config)" // Who made the changes.
|
||||
//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes)
|
||||
|
||||
/**
|
||||
|
|
@ -145,10 +147,10 @@
|
|||
#endif
|
||||
|
||||
// Name displayed in the LCD "Ready" message and Info menu
|
||||
#ifdef THINKERV2_BLTOUCH
|
||||
#define CUSTOM_MACHINE_NAME "Thinker SE+"
|
||||
#if ANY (THINKERV2_BL, THINKERV2_FL, THINKERV2_Direct)
|
||||
#define CUSTOM_MACHINE_NAME "THINKER SE MOD"
|
||||
#else
|
||||
#define CUSTOM_MACHINE_NAME "Thinker SE"
|
||||
#define CUSTOM_MACHINE_NAME "THINKER SE"
|
||||
#endif
|
||||
|
||||
// Printer's unique ID, used by some programs to differentiate between machines.
|
||||
|
|
@ -837,7 +839,13 @@
|
|||
// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
|
||||
#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop.
|
||||
#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop.
|
||||
#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
||||
|
||||
#ifdef THINKERV2_BLTOUCH
|
||||
#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
||||
#else
|
||||
#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop.
|
||||
#endif
|
||||
|
||||
#define I_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
||||
#define J_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
||||
#define K_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
||||
|
|
@ -940,8 +948,11 @@
|
|||
* Override with M203
|
||||
* X, Y, Z [, I [, J [, K]]], E0 [, E1[, E2...]]
|
||||
*/
|
||||
#define DEFAULT_MAX_FEEDRATE { 300, 300, 35, 25 }
|
||||
|
||||
#ifdef THINKERV2_Direct
|
||||
#define DEFAULT_MAX_FEEDRATE { 200, 200, 35, 100 }
|
||||
#else
|
||||
#define DEFAULT_MAX_FEEDRATE { 300, 300, 35, 25 }
|
||||
#endif
|
||||
//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2
|
||||
#if ENABLED(LIMITED_MAX_FR_EDITING)
|
||||
#define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits
|
||||
|
|
@ -953,7 +964,11 @@
|
|||
* Override with M201
|
||||
* X, Y, Z [, I [, J [, K]]], E0 [, E1[, E2...]]
|
||||
*/
|
||||
#define DEFAULT_MAX_ACCELERATION { 1500, 1500, 150, 1500 }
|
||||
#ifdef THINKERV2_Direct
|
||||
#define DEFAULT_MAX_ACCELERATION { 1000, 1000, 150, 3000 }
|
||||
#else
|
||||
#define DEFAULT_MAX_ACCELERATION { 1500, 1500, 150, 1500 }
|
||||
#endif
|
||||
|
||||
//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2
|
||||
#if ENABLED(LIMITED_MAX_ACCEL_EDITING)
|
||||
|
|
@ -968,9 +983,15 @@
|
|||
* M204 R Retract Acceleration
|
||||
* M204 T Travel Acceleration
|
||||
*/
|
||||
#define DEFAULT_ACCELERATION 1250 // X, Y, Z and E acceleration for printing moves
|
||||
#define DEFAULT_RETRACT_ACCELERATION 1250 // E acceleration for retracts
|
||||
#define DEFAULT_TRAVEL_ACCELERATION 1500 // X, Y, Z acceleration for travel (non printing) moves
|
||||
#ifdef THINKERV2_Direct
|
||||
#define DEFAULT_ACCELERATION 700 // X, Y, Z and E acceleration for printing moves
|
||||
#define DEFAULT_RETRACT_ACCELERATION 1250 // E acceleration for retracts
|
||||
#define DEFAULT_TRAVEL_ACCELERATION 750 // X, Y, Z acceleration for travel (non printing) moves
|
||||
#else
|
||||
#define DEFAULT_ACCELERATION 1250 // X, Y, Z and E acceleration for printing moves
|
||||
#define DEFAULT_RETRACT_ACCELERATION 1250 // E acceleration for retracts
|
||||
#define DEFAULT_TRAVEL_ACCELERATION 1500 // X, Y, Z acceleration for travel (non printing) moves
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Default Jerk limits (mm/s)
|
||||
|
|
@ -1443,17 +1464,23 @@
|
|||
* RAMPS-based boards use SERVO3_PIN for the first runout sensor.
|
||||
* For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc.
|
||||
*/
|
||||
#define FILAMENT_RUNOUT_SENSOR
|
||||
#if ENABLED(FILAMENT_RUNOUT_SENSOR)
|
||||
#define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500.
|
||||
#define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each.
|
||||
|
||||
#define FIL_RUNOUT_STATE HIGH // Pin state indicating that filament is NOT present.
|
||||
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
|
||||
#ifdef THINKERV2_FL
|
||||
#define FILAMENT_RUNOUT_SENSOR
|
||||
#else
|
||||
//#define FILAMENT_RUNOUT_SENSOR
|
||||
#endif
|
||||
#if ENABLED(FILAMENT_RUNOUT_SENSOR)
|
||||
#define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500.
|
||||
#define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each.
|
||||
|
||||
#define FIL_RUNOUT_STATE HIGH // Pin state indicating that filament is NOT present.
|
||||
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
|
||||
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
|
||||
//#define WATCH_ALL_RUNOUT_SENSORS // Execute runout script on any triggering sensor, not only for the active extruder.
|
||||
// This is automatically enabled for MIXING_EXTRUDERs.
|
||||
|
||||
|
||||
// Override individually if the runout sensors vary
|
||||
//#define FIL_RUNOUT1_STATE LOW
|
||||
//#define FIL_RUNOUT1_PULLUP
|
||||
|
|
|
|||
|
|
@ -1,5 +1,23 @@
|
|||
## Eryon Thinker SE
|
||||
## Eryone Thinker SE
|
||||
|
||||
- BLTouch probe
|
||||
- Filament runout Sensor
|
||||
- TMC2208 (standalone) stepper drivers
|
||||
- Filament Sensor
|
||||
|
||||
## How to use the config
|
||||
|
||||
#### Check the hardware of your printer
|
||||
|
||||
1. If you're using the stock printer there's need to modify the config.
|
||||
2. If you're using the Filament Runout Sensor:
|
||||
- Enable this line (Remove the "`//`" prefix)<br/>
|
||||
`//#define THINKERV2_FL // Enable for an installed Filament runout sensor`
|
||||
3. You are using the Bltouch:
|
||||
- Enable this line (Remove the "`//`" prefix)<br/>
|
||||
`//#define THINKERV2_BLTOUCH // Enable for an installed BLTOUCH`
|
||||
4. You are using the direct drive extruder:
|
||||
- Enable this line (Remove the "`//`" prefix)<br/>
|
||||
`//#define THINKERV2_Direct // Enable for Direct drive extruder system`
|
||||
5. Can I use all of the mods? The answer is yes. You can use all of them or just some of them.
|
||||
|
||||
## Have fun :)
|
||||
|
|
|
|||
Loading…
Add table
Add a link
Reference in a new issue