diff --git a/config/default/Configuration.h b/config/default/Configuration.h index 19a12e694c..7d2c5b79a7 100644 --- a/config/default/Configuration.h +++ b/config/default/Configuration.h @@ -1621,7 +1621,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/default/Configuration_adv.h b/config/default/Configuration_adv.h index c95378b167..2002b56ced 100644 --- a/config/default/Configuration_adv.h +++ b/config/default/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/3DFabXYZ/Migbot/Configuration.h b/config/examples/3DFabXYZ/Migbot/Configuration.h index 99eb30e9ab..bdaa3d5ad4 100644 --- a/config/examples/3DFabXYZ/Migbot/Configuration.h +++ b/config/examples/3DFabXYZ/Migbot/Configuration.h @@ -1623,7 +1623,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 205 #define PREHEAT_1_TEMP_BED 60 diff --git a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h index 95d4032530..813a35af86 100644 --- a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h +++ b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ #define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/ADIMLab/Gantry v1/Configuration.h b/config/examples/ADIMLab/Gantry v1/Configuration.h index 72e72faabd..b823cf376e 100644 --- a/config/examples/ADIMLab/Gantry v1/Configuration.h +++ b/config/examples/ADIMLab/Gantry v1/Configuration.h @@ -1622,7 +1622,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 195 #define PREHEAT_1_TEMP_BED 55 diff --git a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h index 624df19b57..a14232052e 100644 --- a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h +++ b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/ADIMLab/Gantry v2/Configuration.h b/config/examples/ADIMLab/Gantry v2/Configuration.h index d9b72c0bdc..4d36047383 100644 --- a/config/examples/ADIMLab/Gantry v2/Configuration.h +++ b/config/examples/ADIMLab/Gantry v2/Configuration.h @@ -1622,7 +1622,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h index 61d93dc0de..c67c128520 100644 --- a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h +++ b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/AlephObjects/TAZ4/Configuration.h b/config/examples/AlephObjects/TAZ4/Configuration.h index 83259c4889..c228873a36 100644 --- a/config/examples/AlephObjects/TAZ4/Configuration.h +++ b/config/examples/AlephObjects/TAZ4/Configuration.h @@ -1632,7 +1632,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/AlephObjects/TAZ4/Configuration_adv.h b/config/examples/AlephObjects/TAZ4/Configuration_adv.h index ee261c416d..2882a7948d 100644 --- a/config/examples/AlephObjects/TAZ4/Configuration_adv.h +++ b/config/examples/AlephObjects/TAZ4/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Alfawise/U20-bltouch/Configuration.h b/config/examples/Alfawise/U20-bltouch/Configuration.h index 3ce990389a..39dc22a025 100644 --- a/config/examples/Alfawise/U20-bltouch/Configuration.h +++ b/config/examples/Alfawise/U20-bltouch/Configuration.h @@ -1691,7 +1691,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 200 #define PREHEAT_1_TEMP_BED 60 diff --git a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h index 8df30424fd..37647f0c14 100644 --- a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h +++ b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3368,7 +3374,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Alfawise/U20/Configuration.h b/config/examples/Alfawise/U20/Configuration.h index 38f38b634e..f590019087 100644 --- a/config/examples/Alfawise/U20/Configuration.h +++ b/config/examples/Alfawise/U20/Configuration.h @@ -1693,7 +1693,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 200 #define PREHEAT_1_TEMP_BED 60 diff --git a/config/examples/Alfawise/U20/Configuration_adv.h b/config/examples/Alfawise/U20/Configuration_adv.h index bacee60a02..afc4439ae9 100644 --- a/config/examples/Alfawise/U20/Configuration_adv.h +++ b/config/examples/Alfawise/U20/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3358,7 +3364,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/AliExpress/CL-260/Configuration.h b/config/examples/AliExpress/CL-260/Configuration.h index c50535cc3a..1e46df3957 100644 --- a/config/examples/AliExpress/CL-260/Configuration.h +++ b/config/examples/AliExpress/CL-260/Configuration.h @@ -1621,7 +1621,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/AliExpress/UM2pExt/Configuration.h b/config/examples/AliExpress/UM2pExt/Configuration.h index d13fd862ca..6136d85712 100644 --- a/config/examples/AliExpress/UM2pExt/Configuration.h +++ b/config/examples/AliExpress/UM2pExt/Configuration.h @@ -1622,7 +1622,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/AliExpress/UM2pExt/Configuration_adv.h b/config/examples/AliExpress/UM2pExt/Configuration_adv.h index 18a020987d..9b1a96d060 100644 --- a/config/examples/AliExpress/UM2pExt/Configuration_adv.h +++ b/config/examples/AliExpress/UM2pExt/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3359,7 +3365,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Anet/A2/Configuration.h b/config/examples/Anet/A2/Configuration.h index 65d0eccba2..44ca94be16 100644 --- a/config/examples/Anet/A2/Configuration.h +++ b/config/examples/Anet/A2/Configuration.h @@ -1621,7 +1621,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 200 #define PREHEAT_1_TEMP_BED 60 diff --git a/config/examples/Anet/A2/Configuration_adv.h b/config/examples/Anet/A2/Configuration_adv.h index 2652b4bb6c..6a58b6b36c 100644 --- a/config/examples/Anet/A2/Configuration_adv.h +++ b/config/examples/Anet/A2/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Anet/A2plus/Configuration.h b/config/examples/Anet/A2plus/Configuration.h index e57deb388d..3bd1aaa093 100644 --- a/config/examples/Anet/A2plus/Configuration.h +++ b/config/examples/Anet/A2plus/Configuration.h @@ -1621,7 +1621,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 200 #define PREHEAT_1_TEMP_BED 60 diff --git a/config/examples/Anet/A2plus/Configuration_adv.h b/config/examples/Anet/A2plus/Configuration_adv.h index 2652b4bb6c..6a58b6b36c 100644 --- a/config/examples/Anet/A2plus/Configuration_adv.h +++ b/config/examples/Anet/A2plus/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Anet/A6/Configuration.h b/config/examples/Anet/A6/Configuration.h index 690bc31090..9484c769fe 100644 --- a/config/examples/Anet/A6/Configuration.h +++ b/config/examples/Anet/A6/Configuration.h @@ -1709,7 +1709,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 200 #define PREHEAT_1_TEMP_BED 50 diff --git a/config/examples/Anet/A6/Configuration_adv.h b/config/examples/Anet/A6/Configuration_adv.h index 2ba859d541..edcbbd8b5c 100644 --- a/config/examples/Anet/A6/Configuration_adv.h +++ b/config/examples/Anet/A6/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Anet/A8/Configuration.h b/config/examples/Anet/A8/Configuration.h index 969c02362d..0e48b8fcd1 100644 --- a/config/examples/Anet/A8/Configuration.h +++ b/config/examples/Anet/A8/Configuration.h @@ -1624,7 +1624,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 190 #define PREHEAT_1_TEMP_BED 60 diff --git a/config/examples/Anet/A8/Configuration_adv.h b/config/examples/Anet/A8/Configuration_adv.h index 6ed89a4601..a1909a01bc 100644 --- a/config/examples/Anet/A8/Configuration_adv.h +++ b/config/examples/Anet/A8/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Anet/A8plus/Configuration.h b/config/examples/Anet/A8plus/Configuration.h index 1fe4cdf597..2501d57ef4 100644 --- a/config/examples/Anet/A8plus/Configuration.h +++ b/config/examples/Anet/A8plus/Configuration.h @@ -1623,7 +1623,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 205 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/Anet/A8plus/Configuration_adv.h b/config/examples/Anet/A8plus/Configuration_adv.h index 2cb32ea3be..c798a6c19f 100644 --- a/config/examples/Anet/A8plus/Configuration_adv.h +++ b/config/examples/Anet/A8plus/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Anet/A9/Configuration.h b/config/examples/Anet/A9/Configuration.h index cbb907c0b8..cb90ad38a0 100644 --- a/config/examples/Anet/A9/Configuration.h +++ b/config/examples/Anet/A9/Configuration.h @@ -1621,7 +1621,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 205 #define PREHEAT_1_TEMP_BED 60 diff --git a/config/examples/Anet/A9/Configuration_adv.h b/config/examples/Anet/A9/Configuration_adv.h index 5c2ee16d3d..249f584ada 100644 --- a/config/examples/Anet/A9/Configuration_adv.h +++ b/config/examples/Anet/A9/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Anet/E10/Configuration.h b/config/examples/Anet/E10/Configuration.h index 8e4d996943..62c9fb0d40 100644 --- a/config/examples/Anet/E10/Configuration.h +++ b/config/examples/Anet/E10/Configuration.h @@ -1621,7 +1621,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 200 #define PREHEAT_1_TEMP_BED 60 diff --git a/config/examples/Anet/E10/Configuration_adv.h b/config/examples/Anet/E10/Configuration_adv.h index 530e64f54a..82559be223 100644 --- a/config/examples/Anet/E10/Configuration_adv.h +++ b/config/examples/Anet/E10/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h b/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h index dd0fc1190d..cf57ab28d4 100644 --- a/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h +++ b/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h @@ -1623,7 +1623,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h b/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h index e996e6b116..157bd61915 100644 --- a/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h +++ b/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Anet/E16/Stock/Configuration.h b/config/examples/Anet/E16/Stock/Configuration.h index ae92f3023b..3df1ffcad6 100644 --- a/config/examples/Anet/E16/Stock/Configuration.h +++ b/config/examples/Anet/E16/Stock/Configuration.h @@ -1623,7 +1623,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/Anet/E16/Stock/Configuration_adv.h b/config/examples/Anet/E16/Stock/Configuration_adv.h index dd44153ddf..0d2129b0f2 100644 --- a/config/examples/Anet/E16/Stock/Configuration_adv.h +++ b/config/examples/Anet/E16/Stock/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Anet/ET4+/Configuration.h b/config/examples/Anet/ET4+/Configuration.h index 5bd394a95d..15446f037d 100644 --- a/config/examples/Anet/ET4+/Configuration.h +++ b/config/examples/Anet/ET4+/Configuration.h @@ -1627,7 +1627,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 210 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/Anet/ET4+/Configuration_adv.h b/config/examples/Anet/ET4+/Configuration_adv.h index 26c001f026..e6b9443ce0 100644 --- a/config/examples/Anet/ET4+/Configuration_adv.h +++ b/config/examples/Anet/ET4+/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Anet/ET4-Pro/Configuration.h b/config/examples/Anet/ET4-Pro/Configuration.h index abcc473516..9cd8d76720 100644 --- a/config/examples/Anet/ET4-Pro/Configuration.h +++ b/config/examples/Anet/ET4-Pro/Configuration.h @@ -1627,7 +1627,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 210 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/Anet/ET4-Pro/Configuration_adv.h b/config/examples/Anet/ET4-Pro/Configuration_adv.h index 26c001f026..e6b9443ce0 100644 --- a/config/examples/Anet/ET4-Pro/Configuration_adv.h +++ b/config/examples/Anet/ET4-Pro/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Anet/ET4/Configuration.h b/config/examples/Anet/ET4/Configuration.h index 2e84eb48d5..33017a09d3 100644 --- a/config/examples/Anet/ET4/Configuration.h +++ b/config/examples/Anet/ET4/Configuration.h @@ -1627,7 +1627,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 210 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/Anet/ET4/Configuration_adv.h b/config/examples/Anet/ET4/Configuration_adv.h index d24c6908f5..bd122618c1 100644 --- a/config/examples/Anet/ET4/Configuration_adv.h +++ b/config/examples/Anet/ET4/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Anet/ET4X/Configuration.h b/config/examples/Anet/ET4X/Configuration.h index 898033948f..1ad90e74b6 100644 --- a/config/examples/Anet/ET4X/Configuration.h +++ b/config/examples/Anet/ET4X/Configuration.h @@ -1627,7 +1627,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 210 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/Anet/ET4X/Configuration_adv.h b/config/examples/Anet/ET4X/Configuration_adv.h index d24c6908f5..bd122618c1 100644 --- a/config/examples/Anet/ET4X/Configuration_adv.h +++ b/config/examples/Anet/ET4X/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Anet/ET5-Pro/Configuration.h b/config/examples/Anet/ET5-Pro/Configuration.h index 0e896492f3..f56182272c 100644 --- a/config/examples/Anet/ET5-Pro/Configuration.h +++ b/config/examples/Anet/ET5-Pro/Configuration.h @@ -1616,7 +1616,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 210 #define PREHEAT_1_TEMP_BED 60 diff --git a/config/examples/Anet/ET5-Pro/Configuration_adv.h b/config/examples/Anet/ET5-Pro/Configuration_adv.h index 41c30d0e7a..fa0728bfe6 100644 --- a/config/examples/Anet/ET5-Pro/Configuration_adv.h +++ b/config/examples/Anet/ET5-Pro/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Anet/ET5/Configuration.h b/config/examples/Anet/ET5/Configuration.h index 8dcdd20039..f82a843b69 100644 --- a/config/examples/Anet/ET5/Configuration.h +++ b/config/examples/Anet/ET5/Configuration.h @@ -1616,7 +1616,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 210 #define PREHEAT_1_TEMP_BED 60 diff --git a/config/examples/Anet/ET5/Configuration_adv.h b/config/examples/Anet/ET5/Configuration_adv.h index 41c30d0e7a..fa0728bfe6 100644 --- a/config/examples/Anet/ET5/Configuration_adv.h +++ b/config/examples/Anet/ET5/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Anet/ET5X/Configuration.h b/config/examples/Anet/ET5X/Configuration.h index d27491ac5d..5efacac18a 100644 --- a/config/examples/Anet/ET5X/Configuration.h +++ b/config/examples/Anet/ET5X/Configuration.h @@ -1616,7 +1616,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 210 #define PREHEAT_1_TEMP_BED 60 diff --git a/config/examples/Anet/ET5X/Configuration_adv.h b/config/examples/Anet/ET5X/Configuration_adv.h index 41c30d0e7a..fa0728bfe6 100644 --- a/config/examples/Anet/ET5X/Configuration_adv.h +++ b/config/examples/Anet/ET5X/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/AnyCubic/Chiron/Configuration.h b/config/examples/AnyCubic/Chiron/Configuration.h index 2019b2aae5..2cbd5fd465 100644 --- a/config/examples/AnyCubic/Chiron/Configuration.h +++ b/config/examples/AnyCubic/Chiron/Configuration.h @@ -1625,7 +1625,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 60 diff --git a/config/examples/AnyCubic/Chiron/Configuration_adv.h b/config/examples/AnyCubic/Chiron/Configuration_adv.h index 755c1b8ffc..0863a3dd3b 100644 --- a/config/examples/AnyCubic/Chiron/Configuration_adv.h +++ b/config/examples/AnyCubic/Chiron/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h index 12aa31589b..0b30e7986a 100644 --- a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h +++ b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h @@ -1623,7 +1623,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 190 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h index 2f00f0c0f7..61c6acc3ef 100644 --- a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h +++ b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h index da63459f14..dc6bb377f8 100644 --- a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h +++ b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h @@ -1621,7 +1621,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 190 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h index 159440d21c..f5dea77c35 100644 --- a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h +++ b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/AnyCubic/i3 Mega/Configuration.h b/config/examples/AnyCubic/i3 Mega/Configuration.h index ef40415a42..6821fa1598 100644 --- a/config/examples/AnyCubic/i3 Mega/Configuration.h +++ b/config/examples/AnyCubic/i3 Mega/Configuration.h @@ -1641,7 +1641,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 215 #define PREHEAT_1_TEMP_BED 65 diff --git a/config/examples/AnyCubic/i3 Mega/Configuration_adv.h b/config/examples/AnyCubic/i3 Mega/Configuration_adv.h index 173ff5da0b..a4a0cec6e6 100644 --- a/config/examples/AnyCubic/i3 Mega/Configuration_adv.h +++ b/config/examples/AnyCubic/i3 Mega/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/AnyCubic/i3/Configuration.h b/config/examples/AnyCubic/i3/Configuration.h index d0b1714a7e..25272a94a3 100644 --- a/config/examples/AnyCubic/i3/Configuration.h +++ b/config/examples/AnyCubic/i3/Configuration.h @@ -1621,7 +1621,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 200 #define PREHEAT_1_TEMP_BED 65 diff --git a/config/examples/AnyCubic/i3/Configuration_adv.h b/config/examples/AnyCubic/i3/Configuration_adv.h index a478bf6dc6..7c0aa85004 100644 --- a/config/examples/AnyCubic/i3/Configuration_adv.h +++ b/config/examples/AnyCubic/i3/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/ArmEd/Configuration.h b/config/examples/ArmEd/Configuration.h index 0d4d20259c..985a0fe370 100644 --- a/config/examples/ArmEd/Configuration.h +++ b/config/examples/ArmEd/Configuration.h @@ -1622,7 +1622,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/ArmEd/Configuration_adv.h b/config/examples/ArmEd/Configuration_adv.h index 176429194f..06e1b61b1f 100644 --- a/config/examples/ArmEd/Configuration_adv.h +++ b/config/examples/ArmEd/Configuration_adv.h @@ -117,6 +117,12 @@ #define HEATER_0_INVERTING true #define HEATER_1_INVERTING true +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -335,7 +341,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3361,7 +3367,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Artillery/Genius/Configuration.h b/config/examples/Artillery/Genius/Configuration.h index c9b3eb845a..8767b908ed 100644 --- a/config/examples/Artillery/Genius/Configuration.h +++ b/config/examples/Artillery/Genius/Configuration.h @@ -1621,7 +1621,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/Artillery/Genius/Configuration_adv.h b/config/examples/Artillery/Genius/Configuration_adv.h index 3fb7443cb2..b137b32844 100644 --- a/config/examples/Artillery/Genius/Configuration_adv.h +++ b/config/examples/Artillery/Genius/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Artillery/Sidewinder X1/Configuration.h b/config/examples/Artillery/Sidewinder X1/Configuration.h index 95e2d59df5..3515cf30f3 100644 --- a/config/examples/Artillery/Sidewinder X1/Configuration.h +++ b/config/examples/Artillery/Sidewinder X1/Configuration.h @@ -1621,7 +1621,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/Artillery/Sidewinder X1/Configuration_adv.h b/config/examples/Artillery/Sidewinder X1/Configuration_adv.h index 3fb7443cb2..b137b32844 100644 --- a/config/examples/Artillery/Sidewinder X1/Configuration_adv.h +++ b/config/examples/Artillery/Sidewinder X1/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration.h b/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration.h index 12216e37b2..1746a63571 100644 --- a/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration.h +++ b/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration.h @@ -1637,7 +1637,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 190 #define PREHEAT_1_TEMP_BED 60 diff --git a/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration_adv.h b/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration_adv.h index a148e72bec..2faa69700f 100644 --- a/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration_adv.h +++ b/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Azteeg/X5GT/Configuration.h b/config/examples/Azteeg/X5GT/Configuration.h index ed2d6e849a..a569baedb7 100644 --- a/config/examples/Azteeg/X5GT/Configuration.h +++ b/config/examples/Azteeg/X5GT/Configuration.h @@ -1621,7 +1621,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/Azteeg/X5GT/Configuration_adv.h b/config/examples/Azteeg/X5GT/Configuration_adv.h index c95378b167..2002b56ced 100644 --- a/config/examples/Azteeg/X5GT/Configuration_adv.h +++ b/config/examples/Azteeg/X5GT/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration.h b/config/examples/BIBO/TouchX/cyclops/Configuration.h index 3d440e21c1..741396999e 100644 --- a/config/examples/BIBO/TouchX/cyclops/Configuration.h +++ b/config/examples/BIBO/TouchX/cyclops/Configuration.h @@ -1621,7 +1621,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 190 #define PREHEAT_1_TEMP_BED 65 diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h index f768a562c1..005a46e7ce 100644 --- a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/BIBO/TouchX/default/Configuration.h b/config/examples/BIBO/TouchX/default/Configuration.h index e142170b81..32fb25f78c 100644 --- a/config/examples/BIBO/TouchX/default/Configuration.h +++ b/config/examples/BIBO/TouchX/default/Configuration.h @@ -1621,7 +1621,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 60 diff --git a/config/examples/BIBO/TouchX/default/Configuration_adv.h b/config/examples/BIBO/TouchX/default/Configuration_adv.h index 793cdb08ec..64e15a9de0 100644 --- a/config/examples/BIBO/TouchX/default/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/default/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/BIQU/B1-BLTouch/Configuration.h b/config/examples/BIQU/B1-BLTouch/Configuration.h index a017cbcbfe..2aae586858 100644 --- a/config/examples/BIQU/B1-BLTouch/Configuration.h +++ b/config/examples/BIQU/B1-BLTouch/Configuration.h @@ -1621,7 +1621,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 190 #define PREHEAT_1_TEMP_BED 65 diff --git a/config/examples/BIQU/B1-BLTouch/Configuration_adv.h b/config/examples/BIQU/B1-BLTouch/Configuration_adv.h index 5f2009b30f..3e928fa16e 100644 --- a/config/examples/BIQU/B1-BLTouch/Configuration_adv.h +++ b/config/examples/BIQU/B1-BLTouch/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/BIQU/B1/Configuration.h b/config/examples/BIQU/B1/Configuration.h index 3532b76123..373c4a6dce 100644 --- a/config/examples/BIQU/B1/Configuration.h +++ b/config/examples/BIQU/B1/Configuration.h @@ -1621,7 +1621,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 190 #define PREHEAT_1_TEMP_BED 65 diff --git a/config/examples/BIQU/B1/Configuration_adv.h b/config/examples/BIQU/B1/Configuration_adv.h index 04fd770594..08621ffde5 100644 --- a/config/examples/BIQU/B1/Configuration_adv.h +++ b/config/examples/BIQU/B1/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/BQ/Hephestos/Configuration.h b/config/examples/BQ/Hephestos/Configuration.h index 58bff7f6c0..3cbd27770f 100644 --- a/config/examples/BQ/Hephestos/Configuration.h +++ b/config/examples/BQ/Hephestos/Configuration.h @@ -1622,7 +1622,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 200 #define PREHEAT_1_TEMP_BED 0 diff --git a/config/examples/BQ/Hephestos/Configuration_adv.h b/config/examples/BQ/Hephestos/Configuration_adv.h index 1fd1355009..d0cb2c30eb 100644 --- a/config/examples/BQ/Hephestos/Configuration_adv.h +++ b/config/examples/BQ/Hephestos/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/BQ/Hephestos_2/Configuration.h b/config/examples/BQ/Hephestos_2/Configuration.h index b3b3d44dd6..e4a55a6411 100644 --- a/config/examples/BQ/Hephestos_2/Configuration.h +++ b/config/examples/BQ/Hephestos_2/Configuration.h @@ -1635,7 +1635,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 50 diff --git a/config/examples/BQ/Hephestos_2/Configuration_adv.h b/config/examples/BQ/Hephestos_2/Configuration_adv.h index 523bb5ef20..2eca879229 100644 --- a/config/examples/BQ/Hephestos_2/Configuration_adv.h +++ b/config/examples/BQ/Hephestos_2/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3365,7 +3371,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/BQ/WITBOX/Configuration.h b/config/examples/BQ/WITBOX/Configuration.h index 7f6892b307..7a1afc795e 100644 --- a/config/examples/BQ/WITBOX/Configuration.h +++ b/config/examples/BQ/WITBOX/Configuration.h @@ -1622,7 +1622,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 200 #define PREHEAT_1_TEMP_BED 0 diff --git a/config/examples/BQ/WITBOX/Configuration_adv.h b/config/examples/BQ/WITBOX/Configuration_adv.h index 1fd1355009..d0cb2c30eb 100644 --- a/config/examples/BQ/WITBOX/Configuration_adv.h +++ b/config/examples/BQ/WITBOX/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h b/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h index 2889275830..a2dc7b8f2d 100644 --- a/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h +++ b/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h @@ -1622,7 +1622,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/Cartesio/Configuration.h b/config/examples/Cartesio/Configuration.h index 7867c05d57..1c636c69d5 100644 --- a/config/examples/Cartesio/Configuration.h +++ b/config/examples/Cartesio/Configuration.h @@ -1637,7 +1637,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 190 #define PREHEAT_1_TEMP_BED 50 diff --git a/config/examples/Cartesio/Configuration_adv.h b/config/examples/Cartesio/Configuration_adv.h index afd3fe47ce..895be291d6 100644 --- a/config/examples/Cartesio/Configuration_adv.h +++ b/config/examples/Cartesio/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Copymaster3D/300/Configuration.h b/config/examples/Copymaster3D/300/Configuration.h index 0e5c113cf5..134a8505f7 100644 --- a/config/examples/Copymaster3D/300/Configuration.h +++ b/config/examples/Copymaster3D/300/Configuration.h @@ -1622,7 +1622,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 60 diff --git a/config/examples/Copymaster3D/400/Configuration.h b/config/examples/Copymaster3D/400/Configuration.h index 7d35b21da5..b25c934303 100644 --- a/config/examples/Copymaster3D/400/Configuration.h +++ b/config/examples/Copymaster3D/400/Configuration.h @@ -1621,7 +1621,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 60 diff --git a/config/examples/Copymaster3D/500/Configuration.h b/config/examples/Copymaster3D/500/Configuration.h index d5ca854993..23216407d8 100644 --- a/config/examples/Copymaster3D/500/Configuration.h +++ b/config/examples/Copymaster3D/500/Configuration.h @@ -1622,7 +1622,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 60 diff --git a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h index f2c8744111..711d8c928c 100644 --- a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h @@ -1630,7 +1630,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 200 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h index 3524197bf4..ac39a2954b 100644 --- a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h index b3273dbfc6..beb0a87d7a 100644 --- a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h +++ b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h @@ -1621,7 +1621,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h index fddcb588aa..eb12e16d21 100644 --- a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ #define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h index 0d32fafe01..0ab262e856 100644 --- a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h @@ -1624,7 +1624,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 205 #define PREHEAT_1_TEMP_BED 60 diff --git a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h index 4022e79f60..91ea0505a5 100644 --- a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h index a838fb1717..474c79b388 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h @@ -1624,7 +1624,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 205 #define PREHEAT_1_TEMP_BED 60 diff --git a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h index 4022e79f60..91ea0505a5 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Creality/CR-10 V2/Configuration.h b/config/examples/Creality/CR-10 V2/Configuration.h index 9e5e45d704..c1207e36de 100644 --- a/config/examples/Creality/CR-10 V2/Configuration.h +++ b/config/examples/Creality/CR-10 V2/Configuration.h @@ -1649,7 +1649,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 205 #define PREHEAT_1_TEMP_BED 60 diff --git a/config/examples/Creality/CR-10 V2/Configuration_adv.h b/config/examples/Creality/CR-10 V2/Configuration_adv.h index fc0bfc6983..46b66f64f2 100644 --- a/config/examples/Creality/CR-10 V2/Configuration_adv.h +++ b/config/examples/Creality/CR-10 V2/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3363,7 +3369,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h index c22363b5f4..f9b1cf4946 100644 --- a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -1620,7 +1620,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 185 #define PREHEAT_1_TEMP_BED 45 diff --git a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index c9091881d3..95ef8f3303 100644 --- a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Creality/CR-10/CrealityV1/Configuration.h b/config/examples/Creality/CR-10/CrealityV1/Configuration.h index 2cfe37c0d1..95e84606cd 100644 --- a/config/examples/Creality/CR-10/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10/CrealityV1/Configuration.h @@ -1621,7 +1621,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 190 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h index 76b98de2fa..ddadc2460b 100644 --- a/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3360,7 +3366,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h index e50acb211a..839dfcd573 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h @@ -1621,7 +1621,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 185 #define PREHEAT_1_TEMP_BED 45 diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h index 180dfc6ceb..e5e87943ff 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h index e39d5c1284..962a09495e 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -1622,7 +1622,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 185 #define PREHEAT_1_TEMP_BED 45 diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 5070c172fe..b6734e6b89 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Creality/CR-10S/CrealityV1/Configuration.h b/config/examples/Creality/CR-10S/CrealityV1/Configuration.h index 85b1cf5578..6034177a91 100644 --- a/config/examples/Creality/CR-10S/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10S/CrealityV1/Configuration.h @@ -1622,7 +1622,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 205 #define PREHEAT_1_TEMP_BED 60 diff --git a/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h index 6ac7e43b94..9ea6562161 100644 --- a/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Creality/CR-20 Pro/Configuration.h b/config/examples/Creality/CR-20 Pro/Configuration.h index e09eb2fce2..5d50932b22 100644 --- a/config/examples/Creality/CR-20 Pro/Configuration.h +++ b/config/examples/Creality/CR-20 Pro/Configuration.h @@ -1624,7 +1624,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 185 #define PREHEAT_1_TEMP_BED 45 diff --git a/config/examples/Creality/CR-20 Pro/Configuration_adv.h b/config/examples/Creality/CR-20 Pro/Configuration_adv.h index ab47fec0e7..b7123b5cdd 100644 --- a/config/examples/Creality/CR-20 Pro/Configuration_adv.h +++ b/config/examples/Creality/CR-20 Pro/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Creality/CR-20/Configuration.h b/config/examples/Creality/CR-20/Configuration.h index e582a48375..834199e676 100644 --- a/config/examples/Creality/CR-20/Configuration.h +++ b/config/examples/Creality/CR-20/Configuration.h @@ -1624,7 +1624,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 185 #define PREHEAT_1_TEMP_BED 45 diff --git a/config/examples/Creality/CR-20/Configuration_adv.h b/config/examples/Creality/CR-20/Configuration_adv.h index d2c711a649..5363cd092b 100644 --- a/config/examples/Creality/CR-20/Configuration_adv.h +++ b/config/examples/Creality/CR-20/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Creality/CR-6 SE/Configuration.h b/config/examples/Creality/CR-6 SE/Configuration.h index 380121a8c2..af861c4f73 100644 --- a/config/examples/Creality/CR-6 SE/Configuration.h +++ b/config/examples/Creality/CR-6 SE/Configuration.h @@ -1621,7 +1621,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 200 #define PREHEAT_1_TEMP_BED 60 diff --git a/config/examples/Creality/CR-6 SE/Configuration_adv.h b/config/examples/Creality/CR-6 SE/Configuration_adv.h index 1c58b971ed..ae932a6d59 100644 --- a/config/examples/Creality/CR-6 SE/Configuration_adv.h +++ b/config/examples/Creality/CR-6 SE/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3358,7 +3364,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Creality/CR-8/Configuration.h b/config/examples/Creality/CR-8/Configuration.h index a581bff4fa..b33f74b455 100644 --- a/config/examples/Creality/CR-8/Configuration.h +++ b/config/examples/Creality/CR-8/Configuration.h @@ -1621,7 +1621,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 200 #define PREHEAT_1_TEMP_BED 60 diff --git a/config/examples/Creality/CR-8/Configuration_adv.h b/config/examples/Creality/CR-8/Configuration_adv.h index e0d1d49356..4ca2b188fe 100644 --- a/config/examples/Creality/CR-8/Configuration_adv.h +++ b/config/examples/Creality/CR-8/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Creality/Ender-2/Configuration.h b/config/examples/Creality/Ender-2/Configuration.h index 5c1cb108aa..66b30b797d 100644 --- a/config/examples/Creality/Ender-2/Configuration.h +++ b/config/examples/Creality/Ender-2/Configuration.h @@ -1622,7 +1622,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 185 #define PREHEAT_1_TEMP_BED 45 diff --git a/config/examples/Creality/Ender-2/Configuration_adv.h b/config/examples/Creality/Ender-2/Configuration_adv.h index 570928d00f..c5d00e3f45 100644 --- a/config/examples/Creality/Ender-2/Configuration_adv.h +++ b/config/examples/Creality/Ender-2/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h index b760a7422b..40c60f1f4d 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h @@ -1621,7 +1621,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 185 #define PREHEAT_1_TEMP_BED 45 diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h index 346bec7228..a2a57814ab 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h index cf578116a3..2d87229c4f 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h @@ -1621,7 +1621,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 185 #define PREHEAT_1_TEMP_BED 45 diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index 7622b3e713..bc070d027c 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h index c752e740d1..0bfc0765ff 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -1621,7 +1621,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 185 #define PREHEAT_1_TEMP_BED 45 diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 4ba8c734bf..47be0063b2 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h index 08fe38c6ec..7a063b5600 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h @@ -1622,7 +1622,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 185 #define PREHEAT_1_TEMP_BED 45 diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h index eeecc9d050..e9292cf34e 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h index 59b8b06331..55fc478d66 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h @@ -1625,7 +1625,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 185 #define PREHEAT_1_TEMP_BED 45 diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h index a18a8bb033..aa39110d5a 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3358,7 +3364,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h index 28975e046e..cf939154f2 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h @@ -1622,7 +1622,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 185 #define PREHEAT_1_TEMP_BED 45 diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h index 8343672976..d099a6a5d0 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Creality/Ender-3 V2/Configuration.h b/config/examples/Creality/Ender-3 V2/Configuration.h index 8e2b167fb6..6f2a5dddf3 100644 --- a/config/examples/Creality/Ender-3 V2/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/Configuration.h @@ -1621,7 +1621,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 185 #define PREHEAT_1_TEMP_BED 45 diff --git a/config/examples/Creality/Ender-3 V2/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/Configuration_adv.h index 864a439810..3abe2956d8 100644 --- a/config/examples/Creality/Ender-3 V2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3358,7 +3364,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h index 480afd693b..f5757133dd 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h @@ -1620,7 +1620,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 185 #define PREHEAT_1_TEMP_BED 45 diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h index 541d7011ea..480f03726c 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h index 49c775be5c..447211bb8c 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h @@ -1620,7 +1620,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 185 #define PREHEAT_1_TEMP_BED 45 diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h index 1bb6939231..d294593b18 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h index b9303ba4c5..da5114bac9 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h @@ -1620,7 +1620,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 185 #define PREHEAT_1_TEMP_BED 45 diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h index 541d7011ea..480f03726c 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h index e3806112e2..e79727382e 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h @@ -1621,7 +1621,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 200 #define PREHEAT_1_TEMP_BED 50 diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h index 7cfd63ed26..205f929b65 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h index eb6594613e..166f3b1f6f 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h @@ -1620,7 +1620,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 185 #define PREHEAT_1_TEMP_BED 45 diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h index 516d661159..ec79933dbc 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h index 556ba31400..f7888b93e0 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h @@ -1620,7 +1620,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 185 #define PREHEAT_1_TEMP_BED 45 diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index 690f694642..80102fa7c7 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h index 7e5d3866e6..39c8ea1c6c 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -1620,7 +1620,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 185 #define PREHEAT_1_TEMP_BED 45 diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 9133c4ac24..40d3d99802 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Creality/Ender-3/CrealityV1/Configuration.h b/config/examples/Creality/Ender-3/CrealityV1/Configuration.h index fc51c72584..7b6c76953e 100644 --- a/config/examples/Creality/Ender-3/CrealityV1/Configuration.h +++ b/config/examples/Creality/Ender-3/CrealityV1/Configuration.h @@ -1622,7 +1622,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 185 #define PREHEAT_1_TEMP_BED 45 diff --git a/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h index 4c9c183cea..d57262ae98 100644 --- a/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Creality/Ender-3/CrealityV422/Configuration.h b/config/examples/Creality/Ender-3/CrealityV422/Configuration.h index 971782ccae..9869abe43d 100644 --- a/config/examples/Creality/Ender-3/CrealityV422/Configuration.h +++ b/config/examples/Creality/Ender-3/CrealityV422/Configuration.h @@ -1567,7 +1567,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 220 #define PREHEAT_1_TEMP_BED 45 diff --git a/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h index 4c9c183cea..d57262ae98 100644 --- a/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Creality/Ender-3/CrealityV427/Configuration.h b/config/examples/Creality/Ender-3/CrealityV427/Configuration.h index 3f2b65124d..4eccd5cb30 100644 --- a/config/examples/Creality/Ender-3/CrealityV427/Configuration.h +++ b/config/examples/Creality/Ender-3/CrealityV427/Configuration.h @@ -1628,7 +1628,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 185 #define PREHEAT_1_TEMP_BED 45 diff --git a/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h index 2529146a28..822284b363 100644 --- a/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h index 50536c23b1..6ce506c97b 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h @@ -1622,7 +1622,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h index 5eb1a247cb..c35089cb1e 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h index f736f62f2b..84b99517c5 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h @@ -1622,7 +1622,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h index 5eb1a247cb..c35089cb1e 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h index 8de70f7e31..04e5c9fec4 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h @@ -1622,7 +1622,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h index 5eb1a247cb..c35089cb1e 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h index 4fc1b079a1..73289dea22 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h @@ -1622,7 +1622,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h index 5eb1a247cb..c35089cb1e 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h index bee1f2ca38..5f6a777c84 100644 --- a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h +++ b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h @@ -1627,7 +1627,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h index 10686d1afb..3d81882cd9 100644 --- a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ #define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Creality/Ender-3/MKS Robin E3 1.0/Configuration.h b/config/examples/Creality/Ender-3/MKS Robin E3 1.0/Configuration.h index 3eb4b2b743..daba5b134e 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3 1.0/Configuration.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3 1.0/Configuration.h @@ -1620,7 +1620,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 185 #define PREHEAT_1_TEMP_BED 45 diff --git a/config/examples/Creality/Ender-3/MKS Robin E3 1.0/Configuration_adv.h b/config/examples/Creality/Ender-3/MKS Robin E3 1.0/Configuration_adv.h index 25b2734b02..1982cff883 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3 1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3 1.0/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration.h b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration.h index 4839255b9d..617dfef1a1 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration.h @@ -1622,7 +1622,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 185 #define PREHEAT_1_TEMP_BED 45 diff --git a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h index 39c818ea8e..669ddba8c4 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Creality/Ender-4/Configuration.h b/config/examples/Creality/Ender-4/Configuration.h index a053015e6a..a28580d8f5 100644 --- a/config/examples/Creality/Ender-4/Configuration.h +++ b/config/examples/Creality/Ender-4/Configuration.h @@ -1621,7 +1621,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 200 #define PREHEAT_1_TEMP_BED 60 diff --git a/config/examples/Creality/Ender-4/Configuration_adv.h b/config/examples/Creality/Ender-4/Configuration_adv.h index 522c578fed..fea94511dd 100644 --- a/config/examples/Creality/Ender-4/Configuration_adv.h +++ b/config/examples/Creality/Ender-4/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Creality/Ender-5 Plus/Configuration.h b/config/examples/Creality/Ender-5 Plus/Configuration.h index 20bc741918..ad75e50f8f 100644 --- a/config/examples/Creality/Ender-5 Plus/Configuration.h +++ b/config/examples/Creality/Ender-5 Plus/Configuration.h @@ -1630,7 +1630,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 185 #define PREHEAT_1_TEMP_BED 60 diff --git a/config/examples/Creality/Ender-5 Plus/Configuration_adv.h b/config/examples/Creality/Ender-5 Plus/Configuration_adv.h index 62681b926b..65b69999f4 100644 --- a/config/examples/Creality/Ender-5 Plus/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Plus/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h index 68299ad3f9..51f07606aa 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h @@ -1622,7 +1622,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 200 #define PREHEAT_1_TEMP_BED 50 diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h index efd81e1ea5..388894a17e 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration.h index 44b060344f..9a7b64a35b 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration.h @@ -1622,7 +1622,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 200 #define PREHEAT_1_TEMP_BED 50 diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h index abbe430bc0..5796efe042 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h index 86b3ca00ea..19ec96d051 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h @@ -1592,7 +1592,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 200 #define PREHEAT_1_TEMP_BED 60 diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index ded1e7c77a..6da1c168c0 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration.h b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration.h index b4b7677d9f..67ae39df03 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration.h @@ -1622,7 +1622,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 185 #define PREHEAT_1_TEMP_BED 45 diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h index f95c086d9e..4a621d7a75 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration.h b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration.h index 12277502dd..b0d1c59ea1 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration.h @@ -1622,7 +1622,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 185 #define PREHEAT_1_TEMP_BED 45 diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h index c5b882dc27..22b9d04db6 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h index 14e57ff9ba..6210d70a3b 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h @@ -1622,7 +1622,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 185 #define PREHEAT_1_TEMP_BED 45 diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h index f95c086d9e..4a621d7a75 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h index 8080b0fcb6..ba6c6bc715 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h @@ -1651,7 +1651,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 200 #define PREHEAT_1_TEMP_BED 50 diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h index 5e67efa4ee..987b5b086e 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3361,7 +3367,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h index 88f1e6d833..24a06ae42b 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h @@ -1622,7 +1622,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 200 #define PREHEAT_1_TEMP_BED 50 diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h index efd81e1ea5..388894a17e 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration.h index 064270f628..253ef54518 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration.h @@ -1622,7 +1622,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 200 #define PREHEAT_1_TEMP_BED 50 diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h index abbe430bc0..5796efe042 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration.h index 0b6b0097f9..67338b8511 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration.h @@ -1620,7 +1620,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 200 #define PREHEAT_1_TEMP_BED 45 diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index ed2781aba8..89ec987280 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h index c80e1d4206..ef4f95f6d6 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -1620,7 +1620,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 200 #define PREHEAT_1_TEMP_BED 60 diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index bd59e3ab50..c210504e6c 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Creality/Ender-5/CrealityV1/Configuration.h b/config/examples/Creality/Ender-5/CrealityV1/Configuration.h index 25745b3144..8a533eb041 100644 --- a/config/examples/Creality/Ender-5/CrealityV1/Configuration.h +++ b/config/examples/Creality/Ender-5/CrealityV1/Configuration.h @@ -1622,7 +1622,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 185 #define PREHEAT_1_TEMP_BED 45 diff --git a/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h index d1791845ff..afcf85ac17 100644 --- a/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Creality/Ender-5/CrealityV427/Configuration.h b/config/examples/Creality/Ender-5/CrealityV427/Configuration.h index fdfdebf248..55197125d4 100644 --- a/config/examples/Creality/Ender-5/CrealityV427/Configuration.h +++ b/config/examples/Creality/Ender-5/CrealityV427/Configuration.h @@ -1622,7 +1622,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 185 #define PREHEAT_1_TEMP_BED 45 diff --git a/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h index d1791845ff..afcf85ac17 100644 --- a/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Creality/Ender-6/Configuration.h b/config/examples/Creality/Ender-6/Configuration.h index a8500030f2..20aabd6f0b 100644 --- a/config/examples/Creality/Ender-6/Configuration.h +++ b/config/examples/Creality/Ender-6/Configuration.h @@ -1632,7 +1632,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 195 #define PREHEAT_1_TEMP_BED 45 diff --git a/config/examples/Creality/Ender-6/Configuration_adv.h b/config/examples/Creality/Ender-6/Configuration_adv.h index eb7d1a845a..5e9b7007e4 100644 --- a/config/examples/Creality/Ender-6/Configuration_adv.h +++ b/config/examples/Creality/Ender-6/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration.h b/config/examples/Dagoma/Disco Ultimate/Configuration.h index fe1e97ca13..f19963902b 100644 --- a/config/examples/Dagoma/Disco Ultimate/Configuration.h +++ b/config/examples/Dagoma/Disco Ultimate/Configuration.h @@ -1621,7 +1621,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 190 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h index 817eb21016..e2d4fb7eef 100644 --- a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h +++ b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Daycom/3DP-100/Configuration.h b/config/examples/Daycom/3DP-100/Configuration.h index a9a231ed9b..cb5e557a43 100644 --- a/config/examples/Daycom/3DP-100/Configuration.h +++ b/config/examples/Daycom/3DP-100/Configuration.h @@ -1624,7 +1624,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/Daycom/3DP-100/Configuration_adv.h b/config/examples/Daycom/3DP-100/Configuration_adv.h index b16f865275..36879ed47e 100644 --- a/config/examples/Daycom/3DP-100/Configuration_adv.h +++ b/config/examples/Daycom/3DP-100/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/EXP3D/Imprimante multifonction/Configuration.h b/config/examples/EXP3D/Imprimante multifonction/Configuration.h index 3621c54b5c..dc240dfb30 100644 --- a/config/examples/EXP3D/Imprimante multifonction/Configuration.h +++ b/config/examples/EXP3D/Imprimante multifonction/Configuration.h @@ -1621,7 +1621,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 200 #define PREHEAT_1_TEMP_BED 60 diff --git a/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h b/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h index c23529f77b..9b386b7882 100644 --- a/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h +++ b/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ #define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Einstart-S/Configuration.h b/config/examples/Einstart-S/Configuration.h index 0169c31809..4fd259c51f 100644 --- a/config/examples/Einstart-S/Configuration.h +++ b/config/examples/Einstart-S/Configuration.h @@ -1626,7 +1626,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/Einstart-S/Configuration_adv.h b/config/examples/Einstart-S/Configuration_adv.h index afcd198bf8..6da778f74a 100644 --- a/config/examples/Einstart-S/Configuration_adv.h +++ b/config/examples/Einstart-S/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Eryone/Thinker SE/Thinker V2 board/stock/Configuration.h b/config/examples/Eryone/Thinker SE/Thinker V2 board/stock/Configuration.h index 4b10e83d45..46ae6ef4c4 100644 --- a/config/examples/Eryone/Thinker SE/Thinker V2 board/stock/Configuration.h +++ b/config/examples/Eryone/Thinker SE/Thinker V2 board/stock/Configuration.h @@ -1640,7 +1640,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 205 #define PREHEAT_1_TEMP_BED 65 diff --git a/config/examples/Eryone/Thinker SE/Thinker V2 board/stock/Configuration_adv.h b/config/examples/Eryone/Thinker SE/Thinker V2 board/stock/Configuration_adv.h index b38c4cb289..c57d206e50 100644 --- a/config/examples/Eryone/Thinker SE/Thinker V2 board/stock/Configuration_adv.h +++ b/config/examples/Eryone/Thinker SE/Thinker V2 board/stock/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3363,7 +3369,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/FYSETC/AIO_II/Configuration.h b/config/examples/FYSETC/AIO_II/Configuration.h index d51b604e92..40c8a82e62 100644 --- a/config/examples/FYSETC/AIO_II/Configuration.h +++ b/config/examples/FYSETC/AIO_II/Configuration.h @@ -1622,7 +1622,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/FYSETC/AIO_II/Configuration_adv.h b/config/examples/FYSETC/AIO_II/Configuration_adv.h index 8cff1e67d5..bb560dd42e 100644 --- a/config/examples/FYSETC/AIO_II/Configuration_adv.h +++ b/config/examples/FYSETC/AIO_II/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/FYSETC/F6_13/Configuration.h b/config/examples/FYSETC/F6_13/Configuration.h index 62a972c1e2..13865f6e53 100644 --- a/config/examples/FYSETC/F6_13/Configuration.h +++ b/config/examples/FYSETC/F6_13/Configuration.h @@ -1623,7 +1623,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/FYSETC/F6_13/Configuration_adv.h b/config/examples/FYSETC/F6_13/Configuration_adv.h index 3bc63f0e76..de95e6182c 100644 --- a/config/examples/FYSETC/F6_13/Configuration_adv.h +++ b/config/examples/FYSETC/F6_13/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/FYSETC/S6/Configuration.h b/config/examples/FYSETC/S6/Configuration.h index b109e8278b..96db29294a 100644 --- a/config/examples/FYSETC/S6/Configuration.h +++ b/config/examples/FYSETC/S6/Configuration.h @@ -1621,7 +1621,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/FYSETC/S6/Configuration_adv.h b/config/examples/FYSETC/S6/Configuration_adv.h index 22a818ba09..035effb9d5 100644 --- a/config/examples/FYSETC/S6/Configuration_adv.h +++ b/config/examples/FYSETC/S6/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Felix/DUAL/Configuration.h b/config/examples/Felix/DUAL/Configuration.h index fcd6550076..cca6c2ab72 100644 --- a/config/examples/Felix/DUAL/Configuration.h +++ b/config/examples/Felix/DUAL/Configuration.h @@ -1622,7 +1622,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/Felix/DUAL/Configuration_adv.h b/config/examples/Felix/DUAL/Configuration_adv.h index 3b53c82f34..d59331e843 100644 --- a/config/examples/Felix/DUAL/Configuration_adv.h +++ b/config/examples/Felix/DUAL/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Felix/Single/Configuration.h b/config/examples/Felix/Single/Configuration.h index 51c8a0de4c..b1c023d291 100644 --- a/config/examples/Felix/Single/Configuration.h +++ b/config/examples/Felix/Single/Configuration.h @@ -1622,7 +1622,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/Felix/Single/Configuration_adv.h b/config/examples/Felix/Single/Configuration_adv.h index 3b53c82f34..d59331e843 100644 --- a/config/examples/Felix/Single/Configuration_adv.h +++ b/config/examples/Felix/Single/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/FlashForge/Creator 2X/Configuration.h b/config/examples/FlashForge/Creator 2X/Configuration.h index 55633954ee..feaa334da7 100644 --- a/config/examples/FlashForge/Creator 2X/Configuration.h +++ b/config/examples/FlashForge/Creator 2X/Configuration.h @@ -1623,7 +1623,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 200 #define PREHEAT_1_TEMP_BED 50 diff --git a/config/examples/FlashForge/Creator 2X/Configuration_adv.h b/config/examples/FlashForge/Creator 2X/Configuration_adv.h index a7e291e5a0..626024cd13 100644 --- a/config/examples/FlashForge/Creator 2X/Configuration_adv.h +++ b/config/examples/FlashForge/Creator 2X/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/FlashForge/CreatorPro/Configuration.h b/config/examples/FlashForge/CreatorPro/Configuration.h index ef3f82a6cc..6d99c63168 100644 --- a/config/examples/FlashForge/CreatorPro/Configuration.h +++ b/config/examples/FlashForge/CreatorPro/Configuration.h @@ -1623,7 +1623,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 200 #define PREHEAT_1_TEMP_BED 50 diff --git a/config/examples/FlashForge/CreatorPro/Configuration_adv.h b/config/examples/FlashForge/CreatorPro/Configuration_adv.h index 16b69be1fe..4fc83f586a 100644 --- a/config/examples/FlashForge/CreatorPro/Configuration_adv.h +++ b/config/examples/FlashForge/CreatorPro/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3356,7 +3362,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/FlyingBear/P905H/Configuration.h b/config/examples/FlyingBear/P905H/Configuration.h index 17c47a83ee..ad6eaac486 100644 --- a/config/examples/FlyingBear/P905H/Configuration.h +++ b/config/examples/FlyingBear/P905H/Configuration.h @@ -1626,7 +1626,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 50 diff --git a/config/examples/FlyingBear/P905H/Configuration_adv.h b/config/examples/FlyingBear/P905H/Configuration_adv.h index 55420b8400..b39374cdb7 100644 --- a/config/examples/FlyingBear/P905H/Configuration_adv.h +++ b/config/examples/FlyingBear/P905H/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3360,7 +3366,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/FolgerTech/i3-2020/Configuration.h b/config/examples/FolgerTech/i3-2020/Configuration.h index bcf0352bed..6896e755df 100644 --- a/config/examples/FolgerTech/i3-2020/Configuration.h +++ b/config/examples/FolgerTech/i3-2020/Configuration.h @@ -1623,7 +1623,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/config/examples/FolgerTech/i3-2020/Configuration_adv.h index d31efc00cf..f36f12a753 100644 --- a/config/examples/FolgerTech/i3-2020/Configuration_adv.h +++ b/config/examples/FolgerTech/i3-2020/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Formbot/Raptor/Configuration.h b/config/examples/Formbot/Raptor/Configuration.h index 086d453022..c5991de8b5 100644 --- a/config/examples/Formbot/Raptor/Configuration.h +++ b/config/examples/Formbot/Raptor/Configuration.h @@ -1732,7 +1732,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 200 #define PREHEAT_1_TEMP_BED 60 diff --git a/config/examples/Formbot/Raptor/Configuration_adv.h b/config/examples/Formbot/Raptor/Configuration_adv.h index 65714725ad..c57266f926 100644 --- a/config/examples/Formbot/Raptor/Configuration_adv.h +++ b/config/examples/Formbot/Raptor/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3359,7 +3365,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ #if ENABLED(UBL) #define CUSTOM_USER_MENUS diff --git a/config/examples/Formbot/T_Rex_2+/Configuration.h b/config/examples/Formbot/T_Rex_2+/Configuration.h index 259ce6b7e6..2bb2faba58 100644 --- a/config/examples/Formbot/T_Rex_2+/Configuration.h +++ b/config/examples/Formbot/T_Rex_2+/Configuration.h @@ -1621,7 +1621,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 60 diff --git a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h index f7f0c2c2e6..af00f4570e 100644 --- a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h +++ b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Formbot/T_Rex_3/Configuration.h b/config/examples/Formbot/T_Rex_3/Configuration.h index 68825cd2cd..58bd20a0b6 100644 --- a/config/examples/Formbot/T_Rex_3/Configuration.h +++ b/config/examples/Formbot/T_Rex_3/Configuration.h @@ -1634,7 +1634,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/Formbot/T_Rex_3/Configuration_adv.h b/config/examples/Formbot/T_Rex_3/Configuration_adv.h index d71a349689..4100daf852 100644 --- a/config/examples/Formbot/T_Rex_3/Configuration_adv.h +++ b/config/examples/Formbot/T_Rex_3/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3361,7 +3367,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Geeetech/A10/Configuration.h b/config/examples/Geeetech/A10/Configuration.h index 41ea6a9556..65a36d19b5 100644 --- a/config/examples/Geeetech/A10/Configuration.h +++ b/config/examples/Geeetech/A10/Configuration.h @@ -1621,7 +1621,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 190 #define PREHEAT_1_TEMP_BED 60 diff --git a/config/examples/Geeetech/A10/Configuration_adv.h b/config/examples/Geeetech/A10/Configuration_adv.h index 2ec903e705..4640302992 100644 --- a/config/examples/Geeetech/A10/Configuration_adv.h +++ b/config/examples/Geeetech/A10/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Geeetech/A10D/Configuration.h b/config/examples/Geeetech/A10D/Configuration.h index acafb90f76..0d9efa76cb 100644 --- a/config/examples/Geeetech/A10D/Configuration.h +++ b/config/examples/Geeetech/A10D/Configuration.h @@ -1622,7 +1622,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 200 #define PREHEAT_1_TEMP_BED 60 diff --git a/config/examples/Geeetech/A10D/Configuration_adv.h b/config/examples/Geeetech/A10D/Configuration_adv.h index cb51a7f3ea..d0caa2b6ff 100644 --- a/config/examples/Geeetech/A10D/Configuration_adv.h +++ b/config/examples/Geeetech/A10D/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Geeetech/A10M/Configuration.h b/config/examples/Geeetech/A10M/Configuration.h index 20558160be..9bd2130cc0 100644 --- a/config/examples/Geeetech/A10M/Configuration.h +++ b/config/examples/Geeetech/A10M/Configuration.h @@ -1623,7 +1623,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 190 #define PREHEAT_1_TEMP_BED 60 diff --git a/config/examples/Geeetech/A10M/Configuration_adv.h b/config/examples/Geeetech/A10M/Configuration_adv.h index c543402921..957d6bb168 100644 --- a/config/examples/Geeetech/A10M/Configuration_adv.h +++ b/config/examples/Geeetech/A10M/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Geeetech/A10T/Configuration.h b/config/examples/Geeetech/A10T/Configuration.h index 5a1ac2c9c0..96ae402473 100644 --- a/config/examples/Geeetech/A10T/Configuration.h +++ b/config/examples/Geeetech/A10T/Configuration.h @@ -1624,7 +1624,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 190 #define PREHEAT_1_TEMP_BED 60 diff --git a/config/examples/Geeetech/A10T/Configuration_adv.h b/config/examples/Geeetech/A10T/Configuration_adv.h index c543402921..957d6bb168 100644 --- a/config/examples/Geeetech/A10T/Configuration_adv.h +++ b/config/examples/Geeetech/A10T/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Geeetech/A20/Configuration.h b/config/examples/Geeetech/A20/Configuration.h index 8133f137e0..b094f1f22e 100644 --- a/config/examples/Geeetech/A20/Configuration.h +++ b/config/examples/Geeetech/A20/Configuration.h @@ -1622,7 +1622,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 190 #define PREHEAT_1_TEMP_BED 60 diff --git a/config/examples/Geeetech/A20/Configuration_adv.h b/config/examples/Geeetech/A20/Configuration_adv.h index 8f1d0985c3..ea7b36c3ad 100644 --- a/config/examples/Geeetech/A20/Configuration_adv.h +++ b/config/examples/Geeetech/A20/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Geeetech/A20M/Configuration.h b/config/examples/Geeetech/A20M/Configuration.h index dff57a7f50..8f0a3229d8 100644 --- a/config/examples/Geeetech/A20M/Configuration.h +++ b/config/examples/Geeetech/A20M/Configuration.h @@ -1623,7 +1623,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 190 #define PREHEAT_1_TEMP_BED 60 diff --git a/config/examples/Geeetech/A20M/Configuration_adv.h b/config/examples/Geeetech/A20M/Configuration_adv.h index 8f1d0985c3..ea7b36c3ad 100644 --- a/config/examples/Geeetech/A20M/Configuration_adv.h +++ b/config/examples/Geeetech/A20M/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Geeetech/A20T/Configuration.h b/config/examples/Geeetech/A20T/Configuration.h index 3cb4fe6028..ccbef5a8a8 100644 --- a/config/examples/Geeetech/A20T/Configuration.h +++ b/config/examples/Geeetech/A20T/Configuration.h @@ -1624,7 +1624,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 190 #define PREHEAT_1_TEMP_BED 60 diff --git a/config/examples/Geeetech/A20T/Configuration_adv.h b/config/examples/Geeetech/A20T/Configuration_adv.h index 8f1d0985c3..ea7b36c3ad 100644 --- a/config/examples/Geeetech/A20T/Configuration_adv.h +++ b/config/examples/Geeetech/A20T/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Geeetech/A30/Configuration.h b/config/examples/Geeetech/A30/Configuration.h index f66157fde9..daa8fc6a1b 100644 --- a/config/examples/Geeetech/A30/Configuration.h +++ b/config/examples/Geeetech/A30/Configuration.h @@ -1620,7 +1620,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 200 #define PREHEAT_1_TEMP_BED 60 diff --git a/config/examples/Geeetech/A30/Configuration_adv.h b/config/examples/Geeetech/A30/Configuration_adv.h index 7c0169d5af..72cc54b332 100644 --- a/config/examples/Geeetech/A30/Configuration_adv.h +++ b/config/examples/Geeetech/A30/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3356,7 +3362,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Geeetech/D200/Configuration.h b/config/examples/Geeetech/D200/Configuration.h index 6358452ccc..c67124af78 100644 --- a/config/examples/Geeetech/D200/Configuration.h +++ b/config/examples/Geeetech/D200/Configuration.h @@ -1620,7 +1620,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 200 #define PREHEAT_1_TEMP_BED 60 diff --git a/config/examples/Geeetech/D200/Configuration_adv.h b/config/examples/Geeetech/D200/Configuration_adv.h index 2ee1313ac3..5874c7aa2a 100644 --- a/config/examples/Geeetech/D200/Configuration_adv.h +++ b/config/examples/Geeetech/D200/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Geeetech/Duplicator5/Configuration.h b/config/examples/Geeetech/Duplicator5/Configuration.h index 152733f0fc..a534458b9c 100644 --- a/config/examples/Geeetech/Duplicator5/Configuration.h +++ b/config/examples/Geeetech/Duplicator5/Configuration.h @@ -1621,7 +1621,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/Geeetech/Duplicator5/Configuration_adv.h b/config/examples/Geeetech/Duplicator5/Configuration_adv.h index 22a818ba09..035effb9d5 100644 --- a/config/examples/Geeetech/Duplicator5/Configuration_adv.h +++ b/config/examples/Geeetech/Duplicator5/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Geeetech/E180/Configuration.h b/config/examples/Geeetech/E180/Configuration.h index 32dbfe1b4b..4797417d44 100644 --- a/config/examples/Geeetech/E180/Configuration.h +++ b/config/examples/Geeetech/E180/Configuration.h @@ -1621,7 +1621,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 200 #define PREHEAT_1_TEMP_BED 60 diff --git a/config/examples/Geeetech/E180/Configuration_adv.h b/config/examples/Geeetech/E180/Configuration_adv.h index 7c0169d5af..72cc54b332 100644 --- a/config/examples/Geeetech/E180/Configuration_adv.h +++ b/config/examples/Geeetech/E180/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3356,7 +3362,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Geeetech/GT2560/Configuration.h b/config/examples/Geeetech/GT2560/Configuration.h index e1edf791da..17347d54fc 100644 --- a/config/examples/Geeetech/GT2560/Configuration.h +++ b/config/examples/Geeetech/GT2560/Configuration.h @@ -1626,7 +1626,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h index 9f89df8163..a02b118dcd 100644 --- a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h +++ b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h @@ -1621,7 +1621,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/Geeetech/M201/Configuration.h b/config/examples/Geeetech/M201/Configuration.h index 6d9719e565..0576b73ac9 100644 --- a/config/examples/Geeetech/M201/Configuration.h +++ b/config/examples/Geeetech/M201/Configuration.h @@ -1620,7 +1620,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 200 #define PREHEAT_1_TEMP_BED 60 diff --git a/config/examples/Geeetech/M201/Configuration_adv.h b/config/examples/Geeetech/M201/Configuration_adv.h index 2ee1313ac3..5874c7aa2a 100644 --- a/config/examples/Geeetech/M201/Configuration_adv.h +++ b/config/examples/Geeetech/M201/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Geeetech/MeCreator2/Configuration.h b/config/examples/Geeetech/MeCreator2/Configuration.h index dfad799d41..2ee521482f 100644 --- a/config/examples/Geeetech/MeCreator2/Configuration.h +++ b/config/examples/Geeetech/MeCreator2/Configuration.h @@ -1620,7 +1620,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 190 #define PREHEAT_1_TEMP_BED 60 diff --git a/config/examples/Geeetech/MeCreator2/Configuration_adv.h b/config/examples/Geeetech/MeCreator2/Configuration_adv.h index be7220c3b8..aacc6631e1 100644 --- a/config/examples/Geeetech/MeCreator2/Configuration_adv.h +++ b/config/examples/Geeetech/MeCreator2/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3356,7 +3362,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Geeetech/Me_creator/Configuration.h b/config/examples/Geeetech/Me_creator/Configuration.h index 1d44400a54..c9189f9e5a 100644 --- a/config/examples/Geeetech/Me_creator/Configuration.h +++ b/config/examples/Geeetech/Me_creator/Configuration.h @@ -1621,7 +1621,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/Geeetech/Me_creator/Configuration_adv.h b/config/examples/Geeetech/Me_creator/Configuration_adv.h index 22a818ba09..035effb9d5 100644 --- a/config/examples/Geeetech/Me_creator/Configuration_adv.h +++ b/config/examples/Geeetech/Me_creator/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Geeetech/Me_ducer/Configuration.h b/config/examples/Geeetech/Me_ducer/Configuration.h index 84c6f6086b..f0f9d201eb 100644 --- a/config/examples/Geeetech/Me_ducer/Configuration.h +++ b/config/examples/Geeetech/Me_ducer/Configuration.h @@ -1621,7 +1621,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/Geeetech/Me_ducer/Configuration_adv.h b/config/examples/Geeetech/Me_ducer/Configuration_adv.h index 7443f58ac5..adaf7c4b83 100644 --- a/config/examples/Geeetech/Me_ducer/Configuration_adv.h +++ b/config/examples/Geeetech/Me_ducer/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Geeetech/PI3A PRO/Configuration.h b/config/examples/Geeetech/PI3A PRO/Configuration.h index 2a9e8dadae..938f03cf91 100644 --- a/config/examples/Geeetech/PI3A PRO/Configuration.h +++ b/config/examples/Geeetech/PI3A PRO/Configuration.h @@ -1631,7 +1631,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 200 #define PREHEAT_1_TEMP_BED 60 diff --git a/config/examples/Geeetech/PI3A PRO/Configuration_adv.h b/config/examples/Geeetech/PI3A PRO/Configuration_adv.h index bbab2fa5ac..18f49d12da 100644 --- a/config/examples/Geeetech/PI3A PRO/Configuration_adv.h +++ b/config/examples/Geeetech/PI3A PRO/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h index 970e3df4f0..a4cc974002 100644 --- a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h @@ -1632,7 +1632,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 200 #define PREHEAT_1_TEMP_BED 60 diff --git a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h index 06581fa72b..6f7f1803b0 100644 --- a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h @@ -1631,7 +1631,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 200 #define PREHEAT_1_TEMP_BED 60 diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h index 90bb6f13ad..39b80564d7 100644 --- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h @@ -1621,7 +1621,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 200 #define PREHEAT_1_TEMP_BED 65 diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h index 2ec903e705..4640302992 100644 --- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h index bdfbf5bbf9..a4e435232a 100644 --- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h @@ -1621,7 +1621,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 200 #define PREHEAT_1_TEMP_BED 65 diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h index 2ec903e705..4640302992 100644 --- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/HMS434/Configuration.h b/config/examples/HMS434/Configuration.h index 95ef99349f..978deb5d2c 100644 --- a/config/examples/HMS434/Configuration.h +++ b/config/examples/HMS434/Configuration.h @@ -1619,7 +1619,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/HMS434/Configuration_adv.h b/config/examples/HMS434/Configuration_adv.h index a148c291f6..3b19f65d54 100644 --- a/config/examples/HMS434/Configuration_adv.h +++ b/config/examples/HMS434/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3348,7 +3354,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Infitary/i3-M508/Configuration.h b/config/examples/Infitary/i3-M508/Configuration.h index 6818e17f98..8b87829696 100644 --- a/config/examples/Infitary/i3-M508/Configuration.h +++ b/config/examples/Infitary/i3-M508/Configuration.h @@ -1621,7 +1621,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 200 #define PREHEAT_1_TEMP_BED 50 diff --git a/config/examples/Infitary/i3-M508/Configuration_adv.h b/config/examples/Infitary/i3-M508/Configuration_adv.h index 0b7370f9e0..6b04a03459 100644 --- a/config/examples/Infitary/i3-M508/Configuration_adv.h +++ b/config/examples/Infitary/i3-M508/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Intamsys/FunmatHT 4988/Configuration.h b/config/examples/Intamsys/FunmatHT 4988/Configuration.h index ee9f5dafb6..0811389eaa 100644 --- a/config/examples/Intamsys/FunmatHT 4988/Configuration.h +++ b/config/examples/Intamsys/FunmatHT 4988/Configuration.h @@ -1621,7 +1621,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h b/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h index c167da21e3..9ac9fe1d0d 100644 --- a/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h +++ b/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/JGAurora/A1/Configuration.h b/config/examples/JGAurora/A1/Configuration.h index ed48075355..574f8232ca 100644 --- a/config/examples/JGAurora/A1/Configuration.h +++ b/config/examples/JGAurora/A1/Configuration.h @@ -1625,7 +1625,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 205 #define PREHEAT_1_TEMP_BED 58 diff --git a/config/examples/JGAurora/A1/Configuration_adv.h b/config/examples/JGAurora/A1/Configuration_adv.h index 694004b48f..198aa3ca59 100644 --- a/config/examples/JGAurora/A1/Configuration_adv.h +++ b/config/examples/JGAurora/A1/Configuration_adv.h @@ -118,6 +118,12 @@ //#define HEATER_1_INVERTING 0 #define FAN_INVERTING 1 +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -336,7 +342,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3362,7 +3368,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/JGAurora/A3/Configuration.h b/config/examples/JGAurora/A3/Configuration.h index 8e14f741b9..c6419a4fde 100644 --- a/config/examples/JGAurora/A3/Configuration.h +++ b/config/examples/JGAurora/A3/Configuration.h @@ -1621,7 +1621,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 200 #define PREHEAT_1_TEMP_BED 60 diff --git a/config/examples/JGAurora/A5/Configuration.h b/config/examples/JGAurora/A5/Configuration.h index e36a0d2e92..91989f2b60 100644 --- a/config/examples/JGAurora/A5/Configuration.h +++ b/config/examples/JGAurora/A5/Configuration.h @@ -1629,7 +1629,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 205 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/JGAurora/A5/Configuration_adv.h b/config/examples/JGAurora/A5/Configuration_adv.h index 0f8b5bb8b5..e57538f338 100644 --- a/config/examples/JGAurora/A5/Configuration_adv.h +++ b/config/examples/JGAurora/A5/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/JGAurora/A5S/Configuration.h b/config/examples/JGAurora/A5S/Configuration.h index c819829d5d..49ff4f8093 100644 --- a/config/examples/JGAurora/A5S/Configuration.h +++ b/config/examples/JGAurora/A5S/Configuration.h @@ -1625,7 +1625,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 205 #define PREHEAT_1_TEMP_BED 58 diff --git a/config/examples/JGAurora/A5S/Configuration_adv.h b/config/examples/JGAurora/A5S/Configuration_adv.h index 694004b48f..198aa3ca59 100644 --- a/config/examples/JGAurora/A5S/Configuration_adv.h +++ b/config/examples/JGAurora/A5S/Configuration_adv.h @@ -118,6 +118,12 @@ //#define HEATER_1_INVERTING 0 #define FAN_INVERTING 1 +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -336,7 +342,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3362,7 +3368,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/JGAurora/Magic/Configuration.h b/config/examples/JGAurora/Magic/Configuration.h index c145a53b2c..f0c9df463d 100644 --- a/config/examples/JGAurora/Magic/Configuration.h +++ b/config/examples/JGAurora/Magic/Configuration.h @@ -1621,7 +1621,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 200 #define PREHEAT_1_TEMP_BED 60 diff --git a/config/examples/JGAurora/Magic/Configuration_adv.h b/config/examples/JGAurora/Magic/Configuration_adv.h index ec44ab46ea..8dce67fbb3 100644 --- a/config/examples/JGAurora/Magic/Configuration_adv.h +++ b/config/examples/JGAurora/Magic/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Kingroon/KP3/Configuration.h b/config/examples/Kingroon/KP3/Configuration.h index 2259d25bed..9a3cfaedaa 100644 --- a/config/examples/Kingroon/KP3/Configuration.h +++ b/config/examples/Kingroon/KP3/Configuration.h @@ -1620,7 +1620,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 200 #define PREHEAT_1_TEMP_BED 60 diff --git a/config/examples/Kingroon/KP3/Configuration_adv.h b/config/examples/Kingroon/KP3/Configuration_adv.h index 39fafee666..02eebe4f1f 100644 --- a/config/examples/Kingroon/KP3/Configuration_adv.h +++ b/config/examples/Kingroon/KP3/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Labists/ET4/Configuration.h b/config/examples/Labists/ET4/Configuration.h index 7d25651e4b..391ebe41c0 100644 --- a/config/examples/Labists/ET4/Configuration.h +++ b/config/examples/Labists/ET4/Configuration.h @@ -1627,7 +1627,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 210 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/Labists/ET4/Configuration_adv.h b/config/examples/Labists/ET4/Configuration_adv.h index 26c001f026..e6b9443ce0 100644 --- a/config/examples/Labists/ET4/Configuration_adv.h +++ b/config/examples/Labists/ET4/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/MBot/Cube/Configuration.h b/config/examples/MBot/Cube/Configuration.h index 39168dde0a..64667e2ace 100644 --- a/config/examples/MBot/Cube/Configuration.h +++ b/config/examples/MBot/Cube/Configuration.h @@ -1623,7 +1623,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 200 #define PREHEAT_1_TEMP_BED 50 diff --git a/config/examples/MBot/Cube/Configuration_adv.h b/config/examples/MBot/Cube/Configuration_adv.h index 257bafd8b2..d0cb589b0f 100644 --- a/config/examples/MBot/Cube/Configuration_adv.h +++ b/config/examples/MBot/Cube/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/MakerFarm/Pegasus 12/Configuration.h b/config/examples/MakerFarm/Pegasus 12/Configuration.h index d6e03de1be..3da73ede1b 100644 --- a/config/examples/MakerFarm/Pegasus 12/Configuration.h +++ b/config/examples/MakerFarm/Pegasus 12/Configuration.h @@ -1627,7 +1627,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 200 #define PREHEAT_1_TEMP_BED 60 diff --git a/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h b/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h index c8f3fb6f48..bc8cb40adb 100644 --- a/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h +++ b/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3350,7 +3356,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ #define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/MakerParts/Configuration.h b/config/examples/MakerParts/Configuration.h index d67747d37e..5677b5ed5c 100644 --- a/config/examples/MakerParts/Configuration.h +++ b/config/examples/MakerParts/Configuration.h @@ -1621,7 +1621,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/MakerParts/Configuration_adv.h b/config/examples/MakerParts/Configuration_adv.h index 899a09235c..9f221478e4 100644 --- a/config/examples/MakerParts/Configuration_adv.h +++ b/config/examples/MakerParts/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Malyan/M150/Configuration.h b/config/examples/Malyan/M150/Configuration.h index d76d1162c4..a35a6bec6e 100644 --- a/config/examples/Malyan/M150/Configuration.h +++ b/config/examples/Malyan/M150/Configuration.h @@ -1649,7 +1649,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 205 #define PREHEAT_1_TEMP_BED 60 diff --git a/config/examples/Malyan/M150/Configuration_adv.h b/config/examples/Malyan/M150/Configuration_adv.h index dd7ba1a6da..1290e8090b 100644 --- a/config/examples/Malyan/M150/Configuration_adv.h +++ b/config/examples/Malyan/M150/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Malyan/M200/Configuration.h b/config/examples/Malyan/M200/Configuration.h index 9eebb78e3c..e1dd3f578f 100644 --- a/config/examples/Malyan/M200/Configuration.h +++ b/config/examples/Malyan/M200/Configuration.h @@ -1627,7 +1627,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/Malyan/M200/Configuration_adv.h b/config/examples/Malyan/M200/Configuration_adv.h index e399c916e3..431bd32f27 100644 --- a/config/examples/Malyan/M200/Configuration_adv.h +++ b/config/examples/Malyan/M200/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3359,7 +3365,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Micromake/C1/basic/Configuration.h b/config/examples/Micromake/C1/basic/Configuration.h index 7040cd725e..c2dbb732a5 100644 --- a/config/examples/Micromake/C1/basic/Configuration.h +++ b/config/examples/Micromake/C1/basic/Configuration.h @@ -1625,7 +1625,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/Micromake/C1/enhanced/Configuration.h b/config/examples/Micromake/C1/enhanced/Configuration.h index b607d73086..59fa896ef8 100644 --- a/config/examples/Micromake/C1/enhanced/Configuration.h +++ b/config/examples/Micromake/C1/enhanced/Configuration.h @@ -1625,7 +1625,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/config/examples/Micromake/C1/enhanced/Configuration_adv.h index bd78064dfc..553c9bfda9 100644 --- a/config/examples/Micromake/C1/enhanced/Configuration_adv.h +++ b/config/examples/Micromake/C1/enhanced/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Mks/Robin/Configuration.h b/config/examples/Mks/Robin/Configuration.h index 399910dce8..3881f447df 100644 --- a/config/examples/Mks/Robin/Configuration.h +++ b/config/examples/Mks/Robin/Configuration.h @@ -1621,7 +1621,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/Mks/Robin/Configuration_adv.h b/config/examples/Mks/Robin/Configuration_adv.h index c95378b167..2002b56ced 100644 --- a/config/examples/Mks/Robin/Configuration_adv.h +++ b/config/examples/Mks/Robin/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Mks/Robin_Lite3/Configuration.h b/config/examples/Mks/Robin_Lite3/Configuration.h index 84dff1219d..1581a96543 100644 --- a/config/examples/Mks/Robin_Lite3/Configuration.h +++ b/config/examples/Mks/Robin_Lite3/Configuration.h @@ -1628,7 +1628,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/Mks/Robin_Pro/Configuration.h b/config/examples/Mks/Robin_Pro/Configuration.h index c76b8d4b60..8572701201 100644 --- a/config/examples/Mks/Robin_Pro/Configuration.h +++ b/config/examples/Mks/Robin_Pro/Configuration.h @@ -1623,7 +1623,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/Mks/Sbase/Configuration.h b/config/examples/Mks/Sbase/Configuration.h index 6b0944aa6f..e2b53e374b 100644 --- a/config/examples/Mks/Sbase/Configuration.h +++ b/config/examples/Mks/Sbase/Configuration.h @@ -1621,7 +1621,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/Mks/Sbase/Configuration_adv.h b/config/examples/Mks/Sbase/Configuration_adv.h index 350d1ae070..58e27e2961 100644 --- a/config/examples/Mks/Sbase/Configuration_adv.h +++ b/config/examples/Mks/Sbase/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Modix/Big60/Configuration.h b/config/examples/Modix/Big60/Configuration.h index 44633793e8..9125df4666 100644 --- a/config/examples/Modix/Big60/Configuration.h +++ b/config/examples/Modix/Big60/Configuration.h @@ -1621,7 +1621,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/Modix/Big60/Configuration_adv.h b/config/examples/Modix/Big60/Configuration_adv.h index 5a3bc08ba1..17a0f62d38 100644 --- a/config/examples/Modix/Big60/Configuration_adv.h +++ b/config/examples/Modix/Big60/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Ortur 4/Configuration.h b/config/examples/Ortur 4/Configuration.h index 6653cea631..1fadc2e425 100644 --- a/config/examples/Ortur 4/Configuration.h +++ b/config/examples/Ortur 4/Configuration.h @@ -1621,7 +1621,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 190 #define PREHEAT_1_TEMP_BED 60 diff --git a/config/examples/Ortur 4/Configuration_adv.h b/config/examples/Ortur 4/Configuration_adv.h index e4b4703459..a6fa5e1665 100644 --- a/config/examples/Ortur 4/Configuration_adv.h +++ b/config/examples/Ortur 4/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ #define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Printrbot/PrintrboardG2/Configuration.h b/config/examples/Printrbot/PrintrboardG2/Configuration.h index 8c458f16d1..6c45b69e8a 100644 --- a/config/examples/Printrbot/PrintrboardG2/Configuration.h +++ b/config/examples/Printrbot/PrintrboardG2/Configuration.h @@ -1623,7 +1623,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/Printrbot/Simple Metal RevD/Configuration.h b/config/examples/Printrbot/Simple Metal RevD/Configuration.h index 329b03e04b..ba335d1064 100644 --- a/config/examples/Printrbot/Simple Metal RevD/Configuration.h +++ b/config/examples/Printrbot/Simple Metal RevD/Configuration.h @@ -1621,7 +1621,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h index 2031c62a84..9c6ae26fb0 100644 --- a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h +++ b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h @@ -1621,7 +1621,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 200 #define PREHEAT_1_TEMP_BED 60 diff --git a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h index 0c90165266..f24b5a7a0e 100644 --- a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h +++ b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Qidi/Qidi 1/Configuration.h b/config/examples/Qidi/Qidi 1/Configuration.h index b2b6f0ee0e..e7341c37f9 100644 --- a/config/examples/Qidi/Qidi 1/Configuration.h +++ b/config/examples/Qidi/Qidi 1/Configuration.h @@ -1624,7 +1624,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 200 #define PREHEAT_1_TEMP_BED 50 diff --git a/config/examples/Qidi/Qidi 1/Configuration_adv.h b/config/examples/Qidi/Qidi 1/Configuration_adv.h index 09d8f8392a..c59e8a2ff1 100644 --- a/config/examples/Qidi/Qidi 1/Configuration_adv.h +++ b/config/examples/Qidi/Qidi 1/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Raiscube/A8r/Configuration.h b/config/examples/Raiscube/A8r/Configuration.h index d3cf304c5a..bc12ae4926 100644 --- a/config/examples/Raiscube/A8r/Configuration.h +++ b/config/examples/Raiscube/A8r/Configuration.h @@ -1661,7 +1661,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 200 #define PREHEAT_1_TEMP_BED 50 diff --git a/config/examples/Raiscube/A8r/Configuration_adv.h b/config/examples/Raiscube/A8r/Configuration_adv.h index 2ba859d541..edcbbd8b5c 100644 --- a/config/examples/Raiscube/A8r/Configuration_adv.h +++ b/config/examples/Raiscube/A8r/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/RapideLite/RL200/Configuration.h b/config/examples/RapideLite/RL200/Configuration.h index e105616995..ccd4769cb9 100644 --- a/config/examples/RapideLite/RL200/Configuration.h +++ b/config/examples/RapideLite/RL200/Configuration.h @@ -1621,7 +1621,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/RapideLite/RL200/Configuration_adv.h b/config/examples/RapideLite/RL200/Configuration_adv.h index 0e8a8276c5..06412ddb34 100644 --- a/config/examples/RapideLite/RL200/Configuration_adv.h +++ b/config/examples/RapideLite/RL200/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Renkforce/RF100/Configuration.h b/config/examples/Renkforce/RF100/Configuration.h index 041d610303..ea6ec94327 100644 --- a/config/examples/Renkforce/RF100/Configuration.h +++ b/config/examples/Renkforce/RF100/Configuration.h @@ -1625,7 +1625,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 200 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/Renkforce/RF100/Configuration_adv.h b/config/examples/Renkforce/RF100/Configuration_adv.h index 110b88af17..a433773b63 100644 --- a/config/examples/Renkforce/RF100/Configuration_adv.h +++ b/config/examples/Renkforce/RF100/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Renkforce/RF100XL/Configuration.h b/config/examples/Renkforce/RF100XL/Configuration.h index 69e5121e57..6bf9792274 100644 --- a/config/examples/Renkforce/RF100XL/Configuration.h +++ b/config/examples/Renkforce/RF100XL/Configuration.h @@ -1625,7 +1625,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 200 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/Renkforce/RF100XL/Configuration_adv.h b/config/examples/Renkforce/RF100XL/Configuration_adv.h index 110b88af17..a433773b63 100644 --- a/config/examples/Renkforce/RF100XL/Configuration_adv.h +++ b/config/examples/Renkforce/RF100XL/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Renkforce/RF100v2/Configuration.h b/config/examples/Renkforce/RF100v2/Configuration.h index ea8737ba2e..c6b7ac941a 100644 --- a/config/examples/Renkforce/RF100v2/Configuration.h +++ b/config/examples/Renkforce/RF100v2/Configuration.h @@ -1625,7 +1625,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 200 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/Renkforce/RF100v2/Configuration_adv.h b/config/examples/Renkforce/RF100v2/Configuration_adv.h index 110b88af17..a433773b63 100644 --- a/config/examples/Renkforce/RF100v2/Configuration_adv.h +++ b/config/examples/Renkforce/RF100v2/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/RepRapPro/Huxley/Configuration.h b/config/examples/RepRapPro/Huxley/Configuration.h index 21050b456f..9aa4568611 100644 --- a/config/examples/RepRapPro/Huxley/Configuration.h +++ b/config/examples/RepRapPro/Huxley/Configuration.h @@ -1671,7 +1671,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/RepRapWorld/Megatronics/Configuration.h b/config/examples/RepRapWorld/Megatronics/Configuration.h index b64b61c37b..cffcef9183 100644 --- a/config/examples/RepRapWorld/Megatronics/Configuration.h +++ b/config/examples/RepRapWorld/Megatronics/Configuration.h @@ -1621,7 +1621,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/RigidBot/Configuration.h b/config/examples/RigidBot/Configuration.h index be1ee68cb2..7c862b720c 100644 --- a/config/examples/RigidBot/Configuration.h +++ b/config/examples/RigidBot/Configuration.h @@ -1636,7 +1636,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/RigidBot/Configuration_adv.h b/config/examples/RigidBot/Configuration_adv.h index dfcf7ed955..edf1828e0b 100644 --- a/config/examples/RigidBot/Configuration_adv.h +++ b/config/examples/RigidBot/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Robo3D/R1+/Configuration.h b/config/examples/Robo3D/R1+/Configuration.h index 479aa6d409..602929fa68 100644 --- a/config/examples/Robo3D/R1+/Configuration.h +++ b/config/examples/Robo3D/R1+/Configuration.h @@ -1621,7 +1621,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/SCARA/MP_SCARA/Configuration.h b/config/examples/SCARA/MP_SCARA/Configuration.h index a74eb07657..cc9239512b 100644 --- a/config/examples/SCARA/MP_SCARA/Configuration.h +++ b/config/examples/SCARA/MP_SCARA/Configuration.h @@ -1662,7 +1662,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/SCARA/MP_SCARA/Configuration_adv.h b/config/examples/SCARA/MP_SCARA/Configuration_adv.h index 03f533a631..94adc9b258 100644 --- a/config/examples/SCARA/MP_SCARA/Configuration_adv.h +++ b/config/examples/SCARA/MP_SCARA/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3354,7 +3360,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/SCARA/Morgan/Configuration.h b/config/examples/SCARA/Morgan/Configuration.h index 15249aa08f..6cac7e1884 100644 --- a/config/examples/SCARA/Morgan/Configuration.h +++ b/config/examples/SCARA/Morgan/Configuration.h @@ -1662,7 +1662,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/SCARA/Morgan/Configuration_adv.h b/config/examples/SCARA/Morgan/Configuration_adv.h index 09d96cda29..2351ba8256 100644 --- a/config/examples/SCARA/Morgan/Configuration_adv.h +++ b/config/examples/SCARA/Morgan/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3354,7 +3360,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration.h b/config/examples/STM32/Black_STM32F407VET6/Configuration.h index 337d28c00b..c8a039c1a7 100644 --- a/config/examples/STM32/Black_STM32F407VET6/Configuration.h +++ b/config/examples/STM32/Black_STM32F407VET6/Configuration.h @@ -1621,7 +1621,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h index 7f6a1fa052..67c2ff61a1 100644 --- a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h +++ b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/STM32/STM32F103RE/Configuration.h b/config/examples/STM32/STM32F103RE/Configuration.h index 9c71d4c537..b48a69efc3 100644 --- a/config/examples/STM32/STM32F103RE/Configuration.h +++ b/config/examples/STM32/STM32F103RE/Configuration.h @@ -1623,7 +1623,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 200 #define PREHEAT_1_TEMP_BED 60 diff --git a/config/examples/STM32/STM32F4/Configuration.h b/config/examples/STM32/STM32F4/Configuration.h index 2e2068b916..3a5106a173 100644 --- a/config/examples/STM32/STM32F4/Configuration.h +++ b/config/examples/STM32/STM32F4/Configuration.h @@ -1621,7 +1621,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/Sanguinololu/Configuration.h b/config/examples/Sanguinololu/Configuration.h index 8388699279..09b2fd7328 100644 --- a/config/examples/Sanguinololu/Configuration.h +++ b/config/examples/Sanguinololu/Configuration.h @@ -1652,7 +1652,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/Sanguinololu/Configuration_adv.h b/config/examples/Sanguinololu/Configuration_adv.h index 0caa5d2476..2d492de1a2 100644 --- a/config/examples/Sanguinololu/Configuration_adv.h +++ b/config/examples/Sanguinololu/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Sovol/SV-01/Configuration.h b/config/examples/Sovol/SV-01/Configuration.h index 31934f7cba..487e39dddd 100644 --- a/config/examples/Sovol/SV-01/Configuration.h +++ b/config/examples/Sovol/SV-01/Configuration.h @@ -1622,7 +1622,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 190 #define PREHEAT_1_TEMP_BED 45 diff --git a/config/examples/Sovol/SV-01/Configuration_adv.h b/config/examples/Sovol/SV-01/Configuration_adv.h index eba6e03ecd..abf74b7621 100644 --- a/config/examples/Sovol/SV-01/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3354,7 +3360,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Tevo/Michelangelo/Configuration.h b/config/examples/Tevo/Michelangelo/Configuration.h index c855992f6c..6779fd83c2 100644 --- a/config/examples/Tevo/Michelangelo/Configuration.h +++ b/config/examples/Tevo/Michelangelo/Configuration.h @@ -1622,7 +1622,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 200 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/Tevo/Michelangelo/Configuration_adv.h b/config/examples/Tevo/Michelangelo/Configuration_adv.h index 015b886b59..14812a2cd0 100644 --- a/config/examples/Tevo/Michelangelo/Configuration_adv.h +++ b/config/examples/Tevo/Michelangelo/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Tevo/Nereus/Configuration.h b/config/examples/Tevo/Nereus/Configuration.h index 4a29cd310d..3d838becdc 100644 --- a/config/examples/Tevo/Nereus/Configuration.h +++ b/config/examples/Tevo/Nereus/Configuration.h @@ -1622,7 +1622,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 200 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/Tevo/Nereus/Configuration_adv.h b/config/examples/Tevo/Nereus/Configuration_adv.h index 937cdd2d69..6534efe806 100644 --- a/config/examples/Tevo/Nereus/Configuration_adv.h +++ b/config/examples/Tevo/Nereus/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Tevo/Tarantula Pro/Configuration.h b/config/examples/Tevo/Tarantula Pro/Configuration.h index c38a8db231..7e3f9b9c02 100644 --- a/config/examples/Tevo/Tarantula Pro/Configuration.h +++ b/config/examples/Tevo/Tarantula Pro/Configuration.h @@ -1622,7 +1622,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 200 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/Tevo/Tarantula Pro/Configuration_adv.h b/config/examples/Tevo/Tarantula Pro/Configuration_adv.h index e8045ad76c..6fff0fb05a 100644 --- a/config/examples/Tevo/Tarantula Pro/Configuration_adv.h +++ b/config/examples/Tevo/Tarantula Pro/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h index cf182a9b5d..5627634e5a 100644 --- a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h +++ b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h @@ -1622,7 +1622,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 200 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h index 45001ac168..5ca4552c0f 100644 --- a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h +++ b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h index 52b6fc7603..1e36ace853 100644 --- a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h +++ b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h @@ -1622,7 +1622,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 200 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h index 45001ac168..5ca4552c0f 100644 --- a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h +++ b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/TheBorg/Configuration.h b/config/examples/TheBorg/Configuration.h index f92d06f7f8..332af45cb9 100644 --- a/config/examples/TheBorg/Configuration.h +++ b/config/examples/TheBorg/Configuration.h @@ -1621,7 +1621,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/TheBorg/Configuration_adv.h b/config/examples/TheBorg/Configuration_adv.h index 81ecc19d3b..fbbad8d8ca 100644 --- a/config/examples/TheBorg/Configuration_adv.h +++ b/config/examples/TheBorg/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/TinyBoy2/Configuration.h b/config/examples/TinyBoy2/Configuration.h index 6e82dbde63..576b91b7bc 100644 --- a/config/examples/TinyBoy2/Configuration.h +++ b/config/examples/TinyBoy2/Configuration.h @@ -1667,7 +1667,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/TinyBoy2/Configuration_adv.h b/config/examples/TinyBoy2/Configuration_adv.h index cf864c139e..36ecfd24b3 100644 --- a/config/examples/TinyBoy2/Configuration_adv.h +++ b/config/examples/TinyBoy2/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Tronxy/X1/Configuration.h b/config/examples/Tronxy/X1/Configuration.h index 1c0a824813..b7e27218eb 100644 --- a/config/examples/Tronxy/X1/Configuration.h +++ b/config/examples/Tronxy/X1/Configuration.h @@ -1622,7 +1622,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/Tronxy/X3A/Configuration.h b/config/examples/Tronxy/X3A/Configuration.h index 4fe5506e88..f3cda9f49a 100644 --- a/config/examples/Tronxy/X3A/Configuration.h +++ b/config/examples/Tronxy/X3A/Configuration.h @@ -1625,7 +1625,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 210 #define PREHEAT_1_TEMP_BED 60 diff --git a/config/examples/Tronxy/X3A/Configuration_adv.h b/config/examples/Tronxy/X3A/Configuration_adv.h index db7c6cacf1..ec8244d1f2 100644 --- a/config/examples/Tronxy/X3A/Configuration_adv.h +++ b/config/examples/Tronxy/X3A/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Tronxy/X5S-2E/Configuration.h b/config/examples/Tronxy/X5S-2E/Configuration.h index 6d7b13e1ea..d4b035de84 100644 --- a/config/examples/Tronxy/X5S-2E/Configuration.h +++ b/config/examples/Tronxy/X5S-2E/Configuration.h @@ -1630,7 +1630,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 190 #define PREHEAT_1_TEMP_BED 50 diff --git a/config/examples/Tronxy/X5S-2E/Configuration_adv.h b/config/examples/Tronxy/X5S-2E/Configuration_adv.h index 2cb67f0813..0dd74350d3 100644 --- a/config/examples/Tronxy/X5S-2E/Configuration_adv.h +++ b/config/examples/Tronxy/X5S-2E/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Tronxy/X5S/Configuration.h b/config/examples/Tronxy/X5S/Configuration.h index 9d505334e9..cbb4379e06 100644 --- a/config/examples/Tronxy/X5S/Configuration.h +++ b/config/examples/Tronxy/X5S/Configuration.h @@ -1621,7 +1621,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 50 diff --git a/config/examples/Tronxy/X5SA/Configuration.h b/config/examples/Tronxy/X5SA/Configuration.h index 227a4d9312..04f4dfbf96 100644 --- a/config/examples/Tronxy/X5SA/Configuration.h +++ b/config/examples/Tronxy/X5SA/Configuration.h @@ -1623,7 +1623,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 50 diff --git a/config/examples/Tronxy/X5SA/Configuration_adv.h b/config/examples/Tronxy/X5SA/Configuration_adv.h index 11d2caf126..89f0197fe0 100644 --- a/config/examples/Tronxy/X5SA/Configuration_adv.h +++ b/config/examples/Tronxy/X5SA/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Tronxy/XY100/Configuration.h b/config/examples/Tronxy/XY100/Configuration.h index 0ff258efc3..111dda5dce 100644 --- a/config/examples/Tronxy/XY100/Configuration.h +++ b/config/examples/Tronxy/XY100/Configuration.h @@ -1628,7 +1628,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 200 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/Two Trees/BlueR Plus/Configuration.h b/config/examples/Two Trees/BlueR Plus/Configuration.h index b0f1a04f92..ce7a667770 100644 --- a/config/examples/Two Trees/BlueR Plus/Configuration.h +++ b/config/examples/Two Trees/BlueR Plus/Configuration.h @@ -1625,7 +1625,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 200 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/Two Trees/BlueR Plus/Configuration_adv.h b/config/examples/Two Trees/BlueR Plus/Configuration_adv.h index 641dc0f7cb..96c83e016f 100644 --- a/config/examples/Two Trees/BlueR Plus/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR Plus/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3358,7 +3364,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Two Trees/BlueR/BlueR V1/Configuration.h b/config/examples/Two Trees/BlueR/BlueR V1/Configuration.h index dd76814dd5..720a0cc8ec 100644 --- a/config/examples/Two Trees/BlueR/BlueR V1/Configuration.h +++ b/config/examples/Two Trees/BlueR/BlueR V1/Configuration.h @@ -1651,7 +1651,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h b/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h index 23d2b7645c..6f56001a7d 100644 --- a/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3359,7 +3365,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Two Trees/BlueR/BlueR V2/Configuration.h b/config/examples/Two Trees/BlueR/BlueR V2/Configuration.h index 1fe960b313..2dfb6f6249 100644 --- a/config/examples/Two Trees/BlueR/BlueR V2/Configuration.h +++ b/config/examples/Two Trees/BlueR/BlueR V2/Configuration.h @@ -1656,7 +1656,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h b/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h index 23d2b7645c..6f56001a7d 100644 --- a/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3359,7 +3365,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Two Trees/BlueR/BlueR V3/Configuration.h b/config/examples/Two Trees/BlueR/BlueR V3/Configuration.h index 5624fb446a..34303a3f7c 100644 --- a/config/examples/Two Trees/BlueR/BlueR V3/Configuration.h +++ b/config/examples/Two Trees/BlueR/BlueR V3/Configuration.h @@ -1655,7 +1655,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h b/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h index 23d2b7645c..6f56001a7d 100644 --- a/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3359,7 +3365,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration.h b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration.h index 04883fc885..f96e24b271 100644 --- a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration.h +++ b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration.h @@ -1668,7 +1668,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 190 #define PREHEAT_1_TEMP_BED 50 diff --git a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h index f4fba78fa4..726055bd50 100644 --- a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h +++ b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3364,7 +3370,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Two Trees/Sapphire Pro/Configuration.h b/config/examples/Two Trees/Sapphire Pro/Configuration.h index c7129370f1..5aaa3577d3 100644 --- a/config/examples/Two Trees/Sapphire Pro/Configuration.h +++ b/config/examples/Two Trees/Sapphire Pro/Configuration.h @@ -1655,7 +1655,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 200 #define PREHEAT_1_TEMP_BED 65 diff --git a/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h b/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h index fa5d7d6b92..401160fb2a 100644 --- a/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h +++ b/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3359,7 +3365,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/UltiMachine/Archim1/Configuration.h b/config/examples/UltiMachine/Archim1/Configuration.h index 64dfa6c7a5..f98d169651 100644 --- a/config/examples/UltiMachine/Archim1/Configuration.h +++ b/config/examples/UltiMachine/Archim1/Configuration.h @@ -1621,7 +1621,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/UltiMachine/Archim1/Configuration_adv.h b/config/examples/UltiMachine/Archim1/Configuration_adv.h index 91bedaafd4..cbfee68242 100644 --- a/config/examples/UltiMachine/Archim1/Configuration_adv.h +++ b/config/examples/UltiMachine/Archim1/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/UltiMachine/Archim2/Configuration.h b/config/examples/UltiMachine/Archim2/Configuration.h index 0299633fdc..ab828610d0 100644 --- a/config/examples/UltiMachine/Archim2/Configuration.h +++ b/config/examples/UltiMachine/Archim2/Configuration.h @@ -1621,7 +1621,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/UltiMachine/Archim2/Configuration_adv.h b/config/examples/UltiMachine/Archim2/Configuration_adv.h index ad7b383719..ae5dbdd967 100644 --- a/config/examples/UltiMachine/Archim2/Configuration_adv.h +++ b/config/examples/UltiMachine/Archim2/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/VORONDesign/Configuration.h b/config/examples/VORONDesign/Configuration.h index 137aec7aa1..67da3cc4af 100644 --- a/config/examples/VORONDesign/Configuration.h +++ b/config/examples/VORONDesign/Configuration.h @@ -1621,7 +1621,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/VORONDesign/Configuration_adv.h b/config/examples/VORONDesign/Configuration_adv.h index d8a8f16111..4eca80f32c 100644 --- a/config/examples/VORONDesign/Configuration_adv.h +++ b/config/examples/VORONDesign/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Velleman/K8200/Configuration.h b/config/examples/Velleman/K8200/Configuration.h index 12b3cdd7a1..0da84ef196 100644 --- a/config/examples/Velleman/K8200/Configuration.h +++ b/config/examples/Velleman/K8200/Configuration.h @@ -1642,7 +1642,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 50 // K8200: PLA / set back to 70 if you have an upgraded heatbed power supply diff --git a/config/examples/Velleman/K8200/Configuration_adv.h b/config/examples/Velleman/K8200/Configuration_adv.h index e17a9755ba..079d2da620 100644 --- a/config/examples/Velleman/K8200/Configuration_adv.h +++ b/config/examples/Velleman/K8200/Configuration_adv.h @@ -122,6 +122,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -344,7 +350,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3370,7 +3376,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Velleman/K8400/Dual-head/Configuration.h b/config/examples/Velleman/K8400/Dual-head/Configuration.h index 91f5d4baf8..fb7a57a883 100644 --- a/config/examples/Velleman/K8400/Dual-head/Configuration.h +++ b/config/examples/Velleman/K8400/Dual-head/Configuration.h @@ -1622,7 +1622,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 210 #define PREHEAT_1_TEMP_BED 0 diff --git a/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h b/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h index 4210bdcfb2..2058a983cd 100644 --- a/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h +++ b/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Velleman/K8400/Single-head/Configuration.h b/config/examples/Velleman/K8400/Single-head/Configuration.h index 08af2d5604..caf827113c 100644 --- a/config/examples/Velleman/K8400/Single-head/Configuration.h +++ b/config/examples/Velleman/K8400/Single-head/Configuration.h @@ -1622,7 +1622,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 210 #define PREHEAT_1_TEMP_BED 0 diff --git a/config/examples/Velleman/K8400/Single-head/Configuration_adv.h b/config/examples/Velleman/K8400/Single-head/Configuration_adv.h index 4210bdcfb2..2058a983cd 100644 --- a/config/examples/Velleman/K8400/Single-head/Configuration_adv.h +++ b/config/examples/Velleman/K8400/Single-head/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/WASP/PowerWASP/Configuration.h b/config/examples/WASP/PowerWASP/Configuration.h index cd905b56a3..cd3c49cf25 100644 --- a/config/examples/WASP/PowerWASP/Configuration.h +++ b/config/examples/WASP/PowerWASP/Configuration.h @@ -1635,7 +1635,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 190 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/WASP/PowerWASP/Configuration_adv.h b/config/examples/WASP/PowerWASP/Configuration_adv.h index 103ff294c3..d603bbc5db 100644 --- a/config/examples/WASP/PowerWASP/Configuration_adv.h +++ b/config/examples/WASP/PowerWASP/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Wanhao/Duplicator 4S/Configuration.h b/config/examples/Wanhao/Duplicator 4S/Configuration.h index 38a5d7cb52..625edce473 100644 --- a/config/examples/Wanhao/Duplicator 4S/Configuration.h +++ b/config/examples/Wanhao/Duplicator 4S/Configuration.h @@ -1623,7 +1623,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 200 #define PREHEAT_1_TEMP_BED 50 diff --git a/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h b/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h index 15ef7dbed4..a094e94515 100644 --- a/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Wanhao/Duplicator 6/Configuration.h b/config/examples/Wanhao/Duplicator 6/Configuration.h index 9644b0ae67..2c78e3e3d4 100644 --- a/config/examples/Wanhao/Duplicator 6/Configuration.h +++ b/config/examples/Wanhao/Duplicator 6/Configuration.h @@ -1621,7 +1621,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h index 248ad9aed4..f3adf106c8 100644 --- a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3359,7 +3365,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h b/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h index 453e83cb1e..91202b3ec1 100644 --- a/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h +++ b/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h @@ -1621,7 +1621,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 205 #define PREHEAT_1_TEMP_BED 60 diff --git a/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h index 8ef147ce3d..f877912888 100644 --- a/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h index 11af23be64..2138526c24 100644 --- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h +++ b/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h @@ -1622,7 +1622,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h index 38367721ae..b24f3c22db 100644 --- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Weistek/wt150/Configuration.h b/config/examples/Weistek/wt150/Configuration.h index 74bbd1bb97..a60140c3cf 100644 --- a/config/examples/Weistek/wt150/Configuration.h +++ b/config/examples/Weistek/wt150/Configuration.h @@ -1622,7 +1622,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/Weistek/wt150/Configuration_adv.h b/config/examples/Weistek/wt150/Configuration_adv.h index 786914499b..9edfc39f55 100644 --- a/config/examples/Weistek/wt150/Configuration_adv.h +++ b/config/examples/Weistek/wt150/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Zonestar/P802M/Configuration.h b/config/examples/Zonestar/P802M/Configuration.h index f564eeb871..acf2e0a738 100644 --- a/config/examples/Zonestar/P802M/Configuration.h +++ b/config/examples/Zonestar/P802M/Configuration.h @@ -1622,7 +1622,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 200 #define PREHEAT_1_TEMP_BED 60 diff --git a/config/examples/Zonestar/P802M/Configuration_adv.h b/config/examples/Zonestar/P802M/Configuration_adv.h index 969c1daed8..52598f9aae 100644 --- a/config/examples/Zonestar/P802M/Configuration_adv.h +++ b/config/examples/Zonestar/P802M/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h index e71232ca3f..27ae4fdfb5 100755 --- a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h +++ b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h @@ -1625,7 +1625,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 195 #define PREHEAT_1_TEMP_BED 60 diff --git a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h index 0756700165..6aa2a04fdc 100755 --- a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h +++ b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/adafruit/ST7565/Configuration.h b/config/examples/adafruit/ST7565/Configuration.h index 769e6e8908..00b7a595ca 100644 --- a/config/examples/adafruit/ST7565/Configuration.h +++ b/config/examples/adafruit/ST7565/Configuration.h @@ -1621,7 +1621,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/adafruit/ST7565/Configuration_adv.h b/config/examples/adafruit/ST7565/Configuration_adv.h index c95378b167..2002b56ced 100644 --- a/config/examples/adafruit/ST7565/Configuration_adv.h +++ b/config/examples/adafruit/ST7565/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h index 160db32de9..39a89aa397 100644 --- a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h +++ b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h @@ -1776,7 +1776,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 190 #define PREHEAT_1_TEMP_BED 45 diff --git a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h index de61c595ac..60a047931c 100644 --- a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3360,7 +3366,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/delta/Anycubic/Kossel/Configuration.h b/config/examples/delta/Anycubic/Kossel/Configuration.h index ad779c5b41..e6e15f1add 100644 --- a/config/examples/delta/Anycubic/Kossel/Configuration.h +++ b/config/examples/delta/Anycubic/Kossel/Configuration.h @@ -1772,7 +1772,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 190 #define PREHEAT_1_TEMP_BED 60 diff --git a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h index 556a694637..a3d89ae590 100644 --- a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3359,7 +3365,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/delta/Anycubic/Predator/Configuration.h b/config/examples/delta/Anycubic/Predator/Configuration.h index c9c4af4e33..7a02db1e7b 100644 --- a/config/examples/delta/Anycubic/Predator/Configuration.h +++ b/config/examples/delta/Anycubic/Predator/Configuration.h @@ -1721,7 +1721,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/delta/Anycubic/Predator/Configuration_adv.h b/config/examples/delta/Anycubic/Predator/Configuration_adv.h index 0f4e0fae91..b9c641f3ee 100644 --- a/config/examples/delta/Anycubic/Predator/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Predator/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3360,7 +3366,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/delta/Dreammaker/Overlord/Configuration.h b/config/examples/delta/Dreammaker/Overlord/Configuration.h index 661b4343af..efe1462f28 100644 --- a/config/examples/delta/Dreammaker/Overlord/Configuration.h +++ b/config/examples/delta/Dreammaker/Overlord/Configuration.h @@ -1720,7 +1720,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h index 79a781b8dd..cc4c8f97a2 100644 --- a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h +++ b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3358,7 +3364,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h index ecf23ac77e..e8a2653ff1 100644 --- a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h +++ b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h @@ -1731,7 +1731,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h index 0433b3b1db..abc00498c3 100644 --- a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h +++ b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3359,7 +3365,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h index ddecf3e736..dd697c3517 100644 --- a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h +++ b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h @@ -1719,7 +1719,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h b/config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h index 97592a09f5..9ff874673a 100644 --- a/config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h +++ b/config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h @@ -1720,7 +1720,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/delta/FLSUN/QQ-S/Configuration.h b/config/examples/delta/FLSUN/QQ-S/Configuration.h index 92176f9936..b944248e3c 100644 --- a/config/examples/delta/FLSUN/QQ-S/Configuration.h +++ b/config/examples/delta/FLSUN/QQ-S/Configuration.h @@ -1721,7 +1721,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 200 #define PREHEAT_1_TEMP_BED 60 diff --git a/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h b/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h index 8380ea748f..7a5a23f421 100644 --- a/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h +++ b/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3359,7 +3365,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/delta/FLSUN/QQS-Pro/Configuration.h b/config/examples/delta/FLSUN/QQS-Pro/Configuration.h index cce0150946..cdf3ee8cfe 100644 --- a/config/examples/delta/FLSUN/QQS-Pro/Configuration.h +++ b/config/examples/delta/FLSUN/QQS-Pro/Configuration.h @@ -1729,7 +1729,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 210 #define PREHEAT_1_TEMP_BED 60 diff --git a/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h b/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h index e750eb4e29..a53acffe50 100644 --- a/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h +++ b/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3360,7 +3366,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration.h index 0be9c4880a..88bc018223 100644 --- a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h +++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration.h @@ -1724,7 +1724,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 195 #define PREHEAT_1_TEMP_BED 60 diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h index 59a3b574a1..d44131159b 100644 --- a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h +++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3359,7 +3365,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/delta/FLSUN/kossel/Configuration.h b/config/examples/delta/FLSUN/kossel/Configuration.h index 3e53039549..0315a2d5ff 100644 --- a/config/examples/delta/FLSUN/kossel/Configuration.h +++ b/config/examples/delta/FLSUN/kossel/Configuration.h @@ -1723,7 +1723,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 195 #define PREHEAT_1_TEMP_BED 60 diff --git a/config/examples/delta/FLSUN/kossel/Configuration_adv.h b/config/examples/delta/FLSUN/kossel/Configuration_adv.h index 59a3b574a1..d44131159b 100644 --- a/config/examples/delta/FLSUN/kossel/Configuration_adv.h +++ b/config/examples/delta/FLSUN/kossel/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3359,7 +3365,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration.h b/config/examples/delta/FLSUN/kossel_mini/Configuration.h index 6d2112bfd4..bddc490fe9 100644 --- a/config/examples/delta/FLSUN/kossel_mini/Configuration.h +++ b/config/examples/delta/FLSUN/kossel_mini/Configuration.h @@ -1723,7 +1723,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h index 5b25d08ff9..fefe32d055 100644 --- a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h +++ b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3359,7 +3365,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/delta/Geeetech/G2/Configuration.h b/config/examples/delta/Geeetech/G2/Configuration.h index 58363aca7c..cdd8653df2 100644 --- a/config/examples/delta/Geeetech/G2/Configuration.h +++ b/config/examples/delta/Geeetech/G2/Configuration.h @@ -1720,7 +1720,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 200 #define PREHEAT_1_TEMP_BED 60 diff --git a/config/examples/delta/Geeetech/G2/Configuration_adv.h b/config/examples/delta/Geeetech/G2/Configuration_adv.h index 4c81d063d6..5c09260f7a 100644 --- a/config/examples/delta/Geeetech/G2/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3359,7 +3365,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/delta/Geeetech/G2Pro/Configuration.h b/config/examples/delta/Geeetech/G2Pro/Configuration.h index 085bccedf0..f8b1876128 100644 --- a/config/examples/delta/Geeetech/G2Pro/Configuration.h +++ b/config/examples/delta/Geeetech/G2Pro/Configuration.h @@ -1720,7 +1720,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 200 #define PREHEAT_1_TEMP_BED 60 diff --git a/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h b/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h index 4a3c58c0ad..09454f04e0 100644 --- a/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3359,7 +3365,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/delta/Geeetech/G2S/Configuration.h b/config/examples/delta/Geeetech/G2S/Configuration.h index 932667ca0a..de04136471 100644 --- a/config/examples/delta/Geeetech/G2S/Configuration.h +++ b/config/examples/delta/Geeetech/G2S/Configuration.h @@ -1720,7 +1720,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 200 #define PREHEAT_1_TEMP_BED 60 diff --git a/config/examples/delta/Geeetech/G2S/Configuration_adv.h b/config/examples/delta/Geeetech/G2S/Configuration_adv.h index 4a3c58c0ad..09454f04e0 100644 --- a/config/examples/delta/Geeetech/G2S/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2S/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3359,7 +3365,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/delta/Geeetech/G2SPro/Configuration.h b/config/examples/delta/Geeetech/G2SPro/Configuration.h index 4b70de06ae..2b89bb6dd0 100644 --- a/config/examples/delta/Geeetech/G2SPro/Configuration.h +++ b/config/examples/delta/Geeetech/G2SPro/Configuration.h @@ -1720,7 +1720,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 200 #define PREHEAT_1_TEMP_BED 60 diff --git a/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h b/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h index 4a3c58c0ad..09454f04e0 100644 --- a/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3359,7 +3365,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration.h b/config/examples/delta/Geeetech/Rostock 301/Configuration.h index 57542bb4b1..83e8f13d48 100644 --- a/config/examples/delta/Geeetech/Rostock 301/Configuration.h +++ b/config/examples/delta/Geeetech/Rostock 301/Configuration.h @@ -1721,7 +1721,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h index 0ddc03c6be..13121cc0b0 100644 --- a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h +++ b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3359,7 +3365,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/delta/Hatchbox_Alpha/Configuration.h b/config/examples/delta/Hatchbox_Alpha/Configuration.h index f88a702777..8832eb6ee6 100644 --- a/config/examples/delta/Hatchbox_Alpha/Configuration.h +++ b/config/examples/delta/Hatchbox_Alpha/Configuration.h @@ -1726,7 +1726,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 210 #define PREHEAT_1_TEMP_BED 60 diff --git a/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h b/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h index 32a6fa6626..1ee24f697a 100644 --- a/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h +++ b/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3359,7 +3365,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/delta/MKS/SBASE/Configuration.h b/config/examples/delta/MKS/SBASE/Configuration.h index 066e68fb61..744b5917bd 100644 --- a/config/examples/delta/MKS/SBASE/Configuration.h +++ b/config/examples/delta/MKS/SBASE/Configuration.h @@ -1721,7 +1721,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/delta/MKS/SBASE/Configuration_adv.h b/config/examples/delta/MKS/SBASE/Configuration_adv.h index 55f9573410..961222da1d 100644 --- a/config/examples/delta/MKS/SBASE/Configuration_adv.h +++ b/config/examples/delta/MKS/SBASE/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3359,7 +3365,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/delta/Malyan M300/Configuration.h b/config/examples/delta/Malyan M300/Configuration.h index 40ae994dd4..8cc060ead7 100644 --- a/config/examples/delta/Malyan M300/Configuration.h +++ b/config/examples/delta/Malyan M300/Configuration.h @@ -1686,7 +1686,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/delta/Malyan M300/Configuration_adv.h b/config/examples/delta/Malyan M300/Configuration_adv.h index 31f15e2d2a..70e403e405 100644 --- a/config/examples/delta/Malyan M300/Configuration_adv.h +++ b/config/examples/delta/Malyan M300/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3359,7 +3365,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/delta/Tevo Little Monster/Configuration.h b/config/examples/delta/Tevo Little Monster/Configuration.h index 3f97d3ffb0..3b2f870c0c 100644 --- a/config/examples/delta/Tevo Little Monster/Configuration.h +++ b/config/examples/delta/Tevo Little Monster/Configuration.h @@ -1722,7 +1722,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 195 #define PREHEAT_1_TEMP_BED 60 diff --git a/config/examples/delta/Tevo Little Monster/Configuration_adv.h b/config/examples/delta/Tevo Little Monster/Configuration_adv.h index 1fe2851322..9bd10294fa 100644 --- a/config/examples/delta/Tevo Little Monster/Configuration_adv.h +++ b/config/examples/delta/Tevo Little Monster/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3359,7 +3365,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/delta/generic/Configuration.h b/config/examples/delta/generic/Configuration.h index b051f7c584..0ffa097594 100644 --- a/config/examples/delta/generic/Configuration.h +++ b/config/examples/delta/generic/Configuration.h @@ -1721,7 +1721,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/delta/generic/Configuration_adv.h b/config/examples/delta/generic/Configuration_adv.h index 5b25d08ff9..fefe32d055 100644 --- a/config/examples/delta/generic/Configuration_adv.h +++ b/config/examples/delta/generic/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3359,7 +3365,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/delta/kossel_clear/Configuration.h b/config/examples/delta/kossel_clear/Configuration.h index 1bb96f5ba1..d1986304af 100644 --- a/config/examples/delta/kossel_clear/Configuration.h +++ b/config/examples/delta/kossel_clear/Configuration.h @@ -1721,7 +1721,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 60 diff --git a/config/examples/delta/kossel_clear/Configuration_adv.h b/config/examples/delta/kossel_clear/Configuration_adv.h index a5dc756c2a..ee360a1df3 100644 --- a/config/examples/delta/kossel_clear/Configuration_adv.h +++ b/config/examples/delta/kossel_clear/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3359,7 +3365,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/delta/kossel_mini/Configuration.h b/config/examples/delta/kossel_mini/Configuration.h index d4765e4cae..1143b89bf1 100644 --- a/config/examples/delta/kossel_mini/Configuration.h +++ b/config/examples/delta/kossel_mini/Configuration.h @@ -1723,7 +1723,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/delta/kossel_pro/Configuration.h b/config/examples/delta/kossel_pro/Configuration.h index 109f674d68..4efa9dd6fe 100644 --- a/config/examples/delta/kossel_pro/Configuration.h +++ b/config/examples/delta/kossel_pro/Configuration.h @@ -1742,7 +1742,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/delta/kossel_xl/Configuration.h b/config/examples/delta/kossel_xl/Configuration.h index 376a2be85a..1fb5958aa6 100644 --- a/config/examples/delta/kossel_xl/Configuration.h +++ b/config/examples/delta/kossel_xl/Configuration.h @@ -1726,7 +1726,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/delta/kossel_xl/Configuration_adv.h b/config/examples/delta/kossel_xl/Configuration_adv.h index e01fbf2629..604339bf1f 100644 --- a/config/examples/delta/kossel_xl/Configuration_adv.h +++ b/config/examples/delta/kossel_xl/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3359,7 +3365,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/gCreate/gMax1.5+/Configuration.h b/config/examples/gCreate/gMax1.5+/Configuration.h index 9d0c65ed79..220ac55212 100644 --- a/config/examples/gCreate/gMax1.5+/Configuration.h +++ b/config/examples/gCreate/gMax1.5+/Configuration.h @@ -1629,7 +1629,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 200 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/config/examples/gCreate/gMax1.5+/Configuration_adv.h index 7a0d51149a..4791c1a4c1 100644 --- a/config/examples/gCreate/gMax1.5+/Configuration_adv.h +++ b/config/examples/gCreate/gMax1.5+/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/makibox/Configuration.h b/config/examples/makibox/Configuration.h index 120ba3396e..abd401e8ca 100644 --- a/config/examples/makibox/Configuration.h +++ b/config/examples/makibox/Configuration.h @@ -1624,7 +1624,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/makibox/Configuration_adv.h b/config/examples/makibox/Configuration_adv.h index 597a1a24f7..1d9e78f8d4 100644 --- a/config/examples/makibox/Configuration_adv.h +++ b/config/examples/makibox/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS) diff --git a/config/examples/tvrrug/Round2/Configuration.h b/config/examples/tvrrug/Round2/Configuration.h index 267dd0b82e..37440caed8 100644 --- a/config/examples/tvrrug/Round2/Configuration.h +++ b/config/examples/tvrrug/Round2/Configuration.h @@ -1628,7 +1628,9 @@ // @section temperature -// Preheat Constants +// +// Preheat Constants - Up to 5 are supported without changes +// #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 diff --git a/config/examples/tvrrug/Round2/Configuration_adv.h b/config/examples/tvrrug/Round2/Configuration_adv.h index afd8bfdd26..86b9dacd62 100644 --- a/config/examples/tvrrug/Round2/Configuration_adv.h +++ b/config/examples/tvrrug/Round2/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. @@ -3357,7 +3363,8 @@ #endif /** - * User-defined menu items that execute custom GCode + * User-defined menu items to run custom G-code. + * Up to 25 may be defined, but the actual number is LCD-dependent. */ //#define CUSTOM_USER_MENUS #if ENABLED(CUSTOM_USER_MENUS)