From 6c255608f6125000fdb96f7dfbaea0cd36e6792d Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Fri, 21 Oct 2022 23:04:25 -0500 Subject: [PATCH] =?UTF-8?q?=F0=9F=9A=B8=20Up=20to=203=20MAX=20Thermocouple?= =?UTF-8?q?s?= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit MarlinFirmware/Marlin#24898 --- config/default/Configuration.h | 4 +++ config/default/Configuration_adv.h | 2 ++ .../examples/3DFabXYZ/Migbot/Configuration.h | 4 +++ .../3DFabXYZ/Migbot/Configuration_adv.h | 2 ++ .../ADIMLab/Gantry v1/Configuration.h | 4 +++ .../ADIMLab/Gantry v1/Configuration_adv.h | 2 ++ .../ADIMLab/Gantry v2/Configuration.h | 4 +++ .../ADIMLab/Gantry v2/Configuration_adv.h | 2 ++ .../Alfawise/U20-bltouch/Configuration.h | 4 +++ .../Alfawise/U20-bltouch/Configuration_adv.h | 2 ++ config/examples/Alfawise/U20/Configuration.h | 4 +++ .../examples/Alfawise/U20/Configuration_adv.h | 2 ++ .../AliExpress/CL-260/Configuration.h | 4 +++ .../AliExpress/UM2pExt/Configuration.h | 4 +++ .../AliExpress/UM2pExt/Configuration_adv.h | 2 ++ config/examples/Anet/A2/Configuration.h | 4 +++ config/examples/Anet/A2/Configuration_adv.h | 2 ++ config/examples/Anet/A2plus/Configuration.h | 4 +++ .../examples/Anet/A2plus/Configuration_adv.h | 2 ++ config/examples/Anet/A6/Configuration.h | 4 +++ config/examples/Anet/A6/Configuration_adv.h | 2 ++ config/examples/Anet/A8/Configuration.h | 4 +++ config/examples/Anet/A8/Configuration_adv.h | 2 ++ config/examples/Anet/A8plus/Configuration.h | 4 +++ .../examples/Anet/A8plus/Configuration_adv.h | 2 ++ config/examples/Anet/A9/Configuration.h | 4 +++ config/examples/Anet/A9/Configuration_adv.h | 2 ++ config/examples/Anet/E10/Configuration.h | 4 +++ config/examples/Anet/E10/Configuration_adv.h | 2 ++ .../Anet/E16/BTT SKR 1.3/Configuration.h | 4 +++ .../Anet/E16/BTT SKR 1.3/Configuration_adv.h | 2 ++ .../examples/Anet/E16/Stock/Configuration.h | 4 +++ .../Anet/E16/Stock/Configuration_adv.h | 2 ++ config/examples/Anet/ET4+/Configuration.h | 4 +++ config/examples/Anet/ET4+/Configuration_adv.h | 2 ++ config/examples/Anet/ET4-Pro/Configuration.h | 4 +++ .../examples/Anet/ET4-Pro/Configuration_adv.h | 2 ++ config/examples/Anet/ET4/Configuration.h | 4 +++ config/examples/Anet/ET4/Configuration_adv.h | 2 ++ config/examples/Anet/ET4X/Configuration.h | 4 +++ config/examples/Anet/ET4X/Configuration_adv.h | 2 ++ config/examples/Anet/ET5-Pro/Configuration.h | 4 +++ .../examples/Anet/ET5-Pro/Configuration_adv.h | 2 ++ config/examples/Anet/ET5/Configuration.h | 4 +++ config/examples/Anet/ET5/Configuration_adv.h | 2 ++ config/examples/Anet/ET5X/Configuration.h | 4 +++ config/examples/Anet/ET5X/Configuration_adv.h | 2 ++ .../examples/AnyCubic/Chiron/Configuration.h | 4 +++ .../AnyCubic/Chiron/Configuration_adv.h | 2 ++ .../Mega Zero 2.0/Anycubic V1/Configuration.h | 4 +++ .../Anycubic V1/Configuration_adv.h | 2 ++ .../Mega Zero/Anycubic V1/Configuration.h | 4 +++ .../Mega Zero/Anycubic V1/Configuration_adv.h | 2 ++ .../Configuration.h | 4 +++ .../Configuration_adv.h | 2 ++ .../i3 Mega/Trigorilla AVR/Configuration.h | 4 +++ .../Trigorilla AVR/Configuration_adv.h | 2 ++ .../Trigorilla Pro STM32/Configuration.h | 4 +++ .../Trigorilla Pro STM32/Configuration_adv.h | 2 ++ config/examples/AnyCubic/i3/Configuration.h | 4 +++ .../examples/AnyCubic/i3/Configuration_adv.h | 2 ++ config/examples/ArmEd/Configuration.h | 4 +++ config/examples/ArmEd/Configuration_adv.h | 2 ++ .../Artillery/Genius Pro/Configuration.h | 4 +++ .../Artillery/Genius Pro/Configuration_adv.h | 2 ++ .../Artillery/Genius/BLTouch/Configuration.h | 4 +++ .../Genius/BLTouch/Configuration_adv.h | 2 ++ .../Artillery/Genius/V1/Configuration.h | 4 +++ .../Artillery/Genius/V1/Configuration_adv.h | 2 ++ .../examples/Artillery/Hornet/Configuration.h | 4 +++ .../Artillery/Hornet/Configuration_adv.h | 2 ++ .../0.9 BMG - E3D V6/Configuration.h | 4 +++ .../0.9 BMG - E3D V6/Configuration_adv.h | 2 ++ .../Sidewinder X1/V1/Configuration.h | 4 +++ .../Sidewinder X1/V1/Configuration_adv.h | 2 ++ .../Artillery/Sidewinder X2/Configuration.h | 4 +++ .../Sidewinder X2/Configuration_adv.h | 2 ++ config/examples/Azteeg/X5GT/Configuration.h | 4 +++ .../BIBO/TouchX/cyclops/Configuration.h | 4 +++ .../BIBO/TouchX/cyclops/Configuration_adv.h | 2 ++ .../BIBO/TouchX/default/Configuration.h | 4 +++ .../BIBO/TouchX/default/Configuration_adv.h | 2 ++ .../BIQU/B1 - SKR 1.4/Configuration.h | 4 +++ .../BIQU/B1 - SKR 1.4/Configuration_adv.h | 2 ++ .../examples/BIQU/B1 - SKR 2/Configuration.h | 4 +++ .../BIQU/B1 - SKR 2/Configuration_adv.h | 2 ++ .../examples/BIQU/B1 SE Plus/Configuration.h | 4 +++ .../BIQU/B1 SE Plus/Configuration_adv.h | 2 ++ config/examples/BIQU/BX/Configuration.h | 4 +++ config/examples/BIQU/BX/Configuration_adv.h | 2 ++ .../BIQU/Thunder Standard/Configuration.h | 4 +++ .../BIQU/Thunder Standard/Configuration_adv.h | 2 ++ config/examples/BQ/Hephestos/Configuration.h | 4 +++ .../examples/BQ/Hephestos/Configuration_adv.h | 2 ++ .../examples/BQ/Hephestos_2/Configuration.h | 4 +++ .../BQ/Hephestos_2/Configuration_adv.h | 2 ++ config/examples/BQ/WITBOX/Configuration.h | 4 +++ config/examples/BQ/WITBOX/Configuration_adv.h | 2 ++ config/examples/CTC/A13/Configuration.h | 4 +++ config/examples/CTC/A13/Configuration_adv.h | 2 ++ config/examples/CTC/Bizer/Configuration.h | 4 +++ config/examples/CTC/Bizer/Configuration_adv.h | 2 ++ .../i3 2560 Rev A/no probe/Configuration.h | 4 +++ config/examples/Cartesio/Configuration.h | 4 +++ config/examples/Cartesio/Configuration_adv.h | 2 ++ .../examples/Copymaster3D/300/Configuration.h | 4 +++ .../examples/Copymaster3D/400/Configuration.h | 4 +++ .../examples/Copymaster3D/500/Configuration.h | 4 +++ .../Configuration.h | 4 +++ .../Configuration_adv.h | 2 ++ .../CR-10 Mini/CrealityV1/Configuration.h | 4 +++ .../CR-10 Mini/CrealityV1/Configuration_adv.h | 2 ++ .../CR-10 Mini/MEEB-3DP/Configuration.h | 4 +++ .../CR-10 Mini/MEEB-3DP/Configuration_adv.h | 2 ++ .../CR-10 S4/CrealityV1/Configuration.h | 4 +++ .../CR-10 S4/CrealityV1/Configuration_adv.h | 2 ++ .../Configuration.h | 4 +++ .../Configuration_adv.h | 2 ++ .../Configuration.h | 4 +++ .../Configuration_adv.h | 2 ++ .../CR-10 S5/CrealityV1/Configuration.h | 4 +++ .../CR-10 S5/CrealityV1/Configuration_adv.h | 2 ++ .../CrealityV2.2-BLTouch/Configuration.h | 4 +++ .../CrealityV2.2-BLTouch/Configuration_adv.h | 2 ++ .../Creality/CR-10 V2/Configuration.h | 4 +++ .../Creality/CR-10 V2/Configuration_adv.h | 2 ++ .../Creality/CR-10 V3/Configuration.h | 4 +++ .../Creality/CR-10 V3/Configuration_adv.h | 2 ++ .../Configuration.h | 4 +++ .../Configuration_adv.h | 2 ++ .../Creality/CR-10/CrealityV1/Configuration.h | 4 +++ .../CR-10/CrealityV1/Configuration_adv.h | 2 ++ .../Configuration.h | 4 +++ .../Configuration_adv.h | 2 ++ .../Configuration.h | 4 +++ .../Configuration_adv.h | 2 ++ .../Configuration.h | 4 +++ .../Configuration_adv.h | 2 ++ .../BigTreeTech SKR Pro v1.2/Configuration.h | 4 +++ .../Configuration_adv.h | 2 ++ .../CR-10S/CrealityV1/Configuration.h | 4 +++ .../CR-10S/CrealityV1/Configuration_adv.h | 2 ++ .../Creality/CR-20 Pro/Configuration.h | 4 +++ .../Creality/CR-20 Pro/Configuration_adv.h | 2 ++ .../examples/Creality/CR-20/Configuration.h | 4 +++ .../Creality/CR-20/Configuration_adv.h | 2 ++ .../Creality/CR-30 PrintMill/Configuration.h | 4 +++ .../CR-30 PrintMill/Configuration_adv.h | 2 ++ .../examples/Creality/CR-6 SE/Configuration.h | 4 +++ .../Creality/CR-6 SE/Configuration_adv.h | 2 ++ config/examples/Creality/CR-8/Configuration.h | 4 +++ .../Creality/CR-8/Configuration_adv.h | 2 ++ .../Ender-2 Pro/CrealityV423/Configuration.h | 4 +++ .../CrealityV423/Configuration_adv.h | 2 ++ .../examples/Creality/Ender-2/Configuration.h | 4 +++ .../Creality/Ender-2/Configuration_adv.h | 2 ++ .../Creality/Ender-3 Max/Configuration.h | 4 +++ .../Creality/Ender-3 Max/Configuration_adv.h | 2 ++ .../BigTreeTech SKR 1.4 Turbo/Configuration.h | 4 +++ .../Configuration_adv.h | 2 ++ .../Configuration.h | 4 +++ .../Configuration_adv.h | 2 ++ .../Configuration.h | 4 +++ .../Configuration_adv.h | 2 ++ .../Configuration.h | 4 +++ .../Configuration_adv.h | 2 ++ .../Configuration.h | 4 +++ .../Configuration_adv.h | 2 ++ .../Ender-3 Pro/CrealityV1/Configuration.h | 4 +++ .../CrealityV1/Configuration_adv.h | 2 ++ .../Ender-3 Pro/CrealityV422/Configuration.h | 4 +++ .../CrealityV422/Configuration_adv.h | 2 ++ .../Ender-3 Pro/CrealityV427/Configuration.h | 4 +++ .../CrealityV427/Configuration_adv.h | 2 ++ .../Ender-3 S1/STM32F1/Configuration.h | 4 +++ .../Ender-3 S1/STM32F1/Configuration_adv.h | 2 ++ .../Ender-3 S1/STM32F4/Configuration.h | 4 +++ .../Ender-3 S1/STM32F4/Configuration_adv.h | 2 ++ .../CrealityUI/Configuration.h | 4 +++ .../CrealityUI/Configuration_adv.h | 2 ++ .../MarlinUI/Configuration.h | 4 +++ .../MarlinUI/Configuration_adv.h | 2 ++ .../CrealityUI/Configuration.h | 4 +++ .../CrealityUI/Configuration_adv.h | 2 ++ .../MarlinUI/Configuration.h | 4 +++ .../MarlinUI/Configuration_adv.h | 2 ++ .../CrealityV422/CrealityUI/Configuration.h | 4 +++ .../CrealityUI/Configuration_adv.h | 2 ++ .../CrealityV422/MarlinUI/Configuration.h | 4 +++ .../CrealityV422/MarlinUI/Configuration_adv.h | 2 ++ .../BigTreeTech E3 RRF/Configuration.h | 4 +++ .../BigTreeTech E3 RRF/Configuration_adv.h | 2 ++ .../BigTreeTech SKR 1.4/Configuration.h | 4 +++ .../BigTreeTech SKR 1.4/Configuration_adv.h | 2 ++ .../2-into-1 Hotend/Configuration.h | 4 +++ .../2-into-1 Hotend/Configuration_adv.h | 2 ++ .../Dual Z/Configuration.h | 4 +++ .../Dual Z/Configuration_adv.h | 2 ++ .../Single Extruder/Configuration.h | 4 +++ .../Single Extruder/Configuration_adv.h | 2 ++ .../Configuration.h | 4 +++ .../Configuration_adv.h | 2 ++ .../Configuration.h | 4 +++ .../Configuration_adv.h | 2 ++ .../Configuration.h | 4 +++ .../Configuration_adv.h | 2 ++ .../Configuration.h | 4 +++ .../Configuration_adv.h | 2 ++ .../Configuration.h | 4 +++ .../Configuration_adv.h | 2 ++ .../Ender-3/CrealityV1/Configuration.h | 4 +++ .../Ender-3/CrealityV1/Configuration_adv.h | 2 ++ .../Ender-3/CrealityV422/Configuration.h | 4 +++ .../Ender-3/CrealityV422/Configuration_adv.h | 2 ++ .../Ender-3/CrealityV427/Configuration.h | 4 +++ .../Ender-3/CrealityV427/Configuration_adv.h | 2 ++ .../BLTouch/Configuration.h | 4 +++ .../BLTouch/Configuration_adv.h | 2 ++ .../FYSETC Cheetah 1.2/base/Configuration.h | 4 +++ .../base/Configuration_adv.h | 2 ++ .../FYSETC Cheetah 2.0/Configuration.h | 4 +++ .../FYSETC Cheetah 2.0/Configuration_adv.h | 2 ++ .../FYSETC Cheetah/BLTouch/Configuration.h | 4 +++ .../BLTouch/Configuration_adv.h | 2 ++ .../FYSETC Cheetah/base/Configuration.h | 4 +++ .../FYSETC Cheetah/base/Configuration_adv.h | 2 ++ .../Creality/Ender-3/MEEB-3DP/Configuration.h | 4 +++ .../Ender-3/MEEB-3DP/Configuration_adv.h | 2 ++ .../Ender-3/MKS Robin E3/V1.0/Configuration.h | 4 +++ .../MKS Robin E3/V1.0/Configuration_adv.h | 2 ++ .../Ender-3/MKS Robin E3/V1.1/Configuration.h | 4 +++ .../MKS Robin E3/V1.1/Configuration_adv.h | 2 ++ .../Ender-3/MKS Robin E3P/Configuration.h | 4 +++ .../Ender-3/MKS Robin E3P/Configuration_adv.h | 2 ++ .../TH3D EZBoard Lite V2/Configuration.h | 4 +++ .../TH3D EZBoard Lite V2/Configuration_adv.h | 2 ++ .../examples/Creality/Ender-4/Configuration.h | 4 +++ .../Creality/Ender-4/Configuration_adv.h | 2 ++ .../Creality/Ender-5 Plus/Configuration.h | 4 +++ .../Creality/Ender-5 Plus/Configuration_adv.h | 2 ++ .../BigTreeTech SKR E3 Turbo/Configuration.h | 4 +++ .../Configuration_adv.h | 2 ++ .../Configuration.h | 4 +++ .../Configuration_adv.h | 2 ++ .../Configuration.h | 4 +++ .../Configuration_adv.h | 2 ++ .../Ender-5 Pro/CrealityV1/Configuration.h | 4 +++ .../CrealityV1/Configuration_adv.h | 2 ++ .../Ender-5 Pro/CrealityV422/Configuration.h | 4 +++ .../CrealityV422/Configuration_adv.h | 2 ++ .../Ender-5 Pro/CrealityV427/Configuration.h | 4 +++ .../CrealityV427/Configuration_adv.h | 2 ++ .../Configuration.h | 4 +++ .../Configuration_adv.h | 2 ++ .../BigTreeTech SKR E3 Turbo/Configuration.h | 4 +++ .../Configuration_adv.h | 2 ++ .../Configuration.h | 4 +++ .../Configuration_adv.h | 2 ++ .../Configuration.h | 4 +++ .../Configuration_adv.h | 2 ++ .../Ender-5/CrealityV1/Configuration.h | 4 +++ .../Ender-5/CrealityV1/Configuration_adv.h | 2 ++ .../Ender-5/CrealityV427/Configuration.h | 4 +++ .../Ender-5/CrealityV427/Configuration_adv.h | 2 ++ .../examples/Creality/Ender-6/Configuration.h | 4 +++ .../Creality/Ender-6/Configuration_adv.h | 2 ++ .../Dagoma/Disco Ultimate/Configuration.h | 4 +++ .../Dagoma/Disco Ultimate/Configuration_adv.h | 2 ++ .../examples/Daycom/3DP-100/Configuration.h | 4 +++ .../Daycom/3DP-100/Configuration_adv.h | 2 ++ .../Imprimante multifonction/Configuration.h | 4 +++ .../Configuration_adv.h | 2 ++ .../EasyThreeD/ET4000PLUS/Configuration.h | 4 +++ .../EasyThreeD/ET4000PLUS/Configuration_adv.h | 2 ++ config/examples/Einstart-S/Configuration.h | 4 +++ .../examples/Einstart-S/Configuration_adv.h | 2 ++ .../examples/Elegoo/Neptune 2/Configuration.h | 4 +++ .../Elegoo/Neptune 2/Configuration_adv.h | 2 ++ .../Eryone/Thinker SE/Configuration.h | 4 +++ .../Eryone/Thinker SE/Configuration_adv.h | 2 ++ .../Eryone/Thinker V2/Configuration.h | 4 +++ .../Eryone/Thinker V2/Configuration_adv.h | 2 ++ config/examples/FYSETC/AIO_II/Configuration.h | 4 +++ .../FYSETC/AIO_II/Configuration_adv.h | 2 ++ config/examples/FYSETC/F6_13/Configuration.h | 4 +++ .../examples/FYSETC/F6_13/Configuration_adv.h | 2 ++ config/examples/FYSETC/S6/Configuration.h | 4 +++ config/examples/FYSETC/S6/Configuration_adv.h | 2 ++ config/examples/Felix/DUAL/Configuration.h | 4 +++ .../examples/Felix/DUAL/Configuration_adv.h | 2 ++ config/examples/Felix/Single/Configuration.h | 4 +++ .../examples/Felix/Single/Configuration_adv.h | 2 ++ .../FlashForge/Creator 2X/Configuration.h | 4 +++ .../FlashForge/Creator 2X/Configuration_adv.h | 2 ++ .../FlashForge/CreatorPro/Configuration.h | 4 +++ .../FlashForge/CreatorPro/Configuration_adv.h | 2 ++ .../examples/FlyingBear/P902/Configuration.h | 4 +++ .../FlyingBear/P902/Configuration_adv.h | 2 ++ .../examples/FlyingBear/P905H/Configuration.h | 4 +++ .../FlyingBear/P905H/Configuration_adv.h | 2 ++ .../FoamCutter/generic/Configuration.h | 4 +++ .../FoamCutter/rcKeith/Configuration.h | 4 +++ .../FoamCutter/rcKeith/Configuration_adv.h | 2 ++ .../FolgerTech/FT-5 R2/Configuration.h | 4 +++ .../FolgerTech/FT-5 R2/Configuration_adv.h | 2 ++ .../FolgerTech/i3-2020/Configuration.h | 4 +++ .../FolgerTech/i3-2020/Configuration_adv.h | 2 ++ .../examples/Formbot/Raptor/Configuration.h | 4 +++ .../Formbot/Raptor/Configuration_adv.h | 2 ++ .../examples/Formbot/T_Rex_2+/Configuration.h | 4 +++ .../Formbot/T_Rex_2+/Configuration_adv.h | 2 ++ .../examples/Formbot/T_Rex_3/Configuration.h | 4 +++ .../Formbot/T_Rex_3/Configuration_adv.h | 2 ++ config/examples/Geeetech/A10/Configuration.h | 4 +++ .../examples/Geeetech/A10/Configuration_adv.h | 2 ++ config/examples/Geeetech/A10D/Configuration.h | 4 +++ .../Geeetech/A10D/Configuration_adv.h | 2 ++ .../Geeetech/A10M/Stock LCD/Configuration.h | 4 +++ .../A10M/Stock LCD/Configuration_adv.h | 2 ++ .../A10M/YHCB2004_V4.1/Configuration.h | 4 +++ .../A10M/YHCB2004_V4.1/Configuration_adv.h | 2 ++ .../examples/Geeetech/A10PRO/Configuration.h | 4 +++ .../Geeetech/A10PRO/Configuration_adv.h | 2 ++ .../Geeetech/A10T/Stock LCD/Configuration.h | 4 +++ .../A10T/Stock LCD/Configuration_adv.h | 2 ++ .../A10T/YHCB2004_V4.1/Configuration.h | 4 +++ .../A10T/YHCB2004_V4.1/Configuration_adv.h | 2 ++ config/examples/Geeetech/A20/Configuration.h | 4 +++ .../examples/Geeetech/A20/Configuration_adv.h | 2 ++ config/examples/Geeetech/A20M/Configuration.h | 4 +++ .../Geeetech/A20M/Configuration_adv.h | 2 ++ config/examples/Geeetech/A20T/Configuration.h | 4 +++ .../Geeetech/A20T/Configuration_adv.h | 2 ++ config/examples/Geeetech/A30/Configuration.h | 4 +++ .../examples/Geeetech/A30/Configuration_adv.h | 2 ++ config/examples/Geeetech/A30M/Configuration.h | 4 +++ .../Geeetech/A30M/Configuration_adv.h | 2 ++ config/examples/Geeetech/A30T/Configuration.h | 4 +++ .../Geeetech/A30T/Configuration_adv.h | 2 ++ config/examples/Geeetech/D200/Configuration.h | 4 +++ .../Geeetech/D200/Configuration_adv.h | 2 ++ .../Geeetech/Duplicator5/Configuration.h | 4 +++ .../Geeetech/Duplicator5/Configuration_adv.h | 2 ++ config/examples/Geeetech/E180/Configuration.h | 4 +++ .../Geeetech/E180/Configuration_adv.h | 2 ++ .../examples/Geeetech/GT2560/Configuration.h | 4 +++ .../Geeetech/I3_Pro_X-GT2560/Configuration.h | 4 +++ config/examples/Geeetech/M201/Configuration.h | 4 +++ .../Geeetech/M201/Configuration_adv.h | 2 ++ .../Geeetech/MeCreator2/Configuration.h | 4 +++ .../Geeetech/MeCreator2/Configuration_adv.h | 2 ++ .../Geeetech/Me_creator/Configuration.h | 4 +++ .../Geeetech/Me_creator/Configuration_adv.h | 2 ++ .../Geeetech/Me_ducer/Configuration.h | 4 +++ .../Geeetech/Me_ducer/Configuration_adv.h | 2 ++ .../Geeetech/PI3A PRO/Configuration.h | 4 +++ .../Geeetech/PI3A PRO/Configuration_adv.h | 2 ++ .../Prusa i3 Pro B/bltouch/Configuration.h | 4 +++ .../Prusa i3 Pro B/noprobe/Configuration.h | 4 +++ .../Geeetech/Prusa i3 Pro C/Configuration.h | 4 +++ .../Prusa i3 Pro C/Configuration_adv.h | 2 ++ .../Geeetech/Prusa i3 Pro W/Configuration.h | 4 +++ .../Prusa i3 Pro W/Configuration_adv.h | 2 ++ config/examples/HMS434/Configuration.h | 4 +++ config/examples/HMS434/Configuration_adv.h | 2 ++ .../examples/Infitary/i3-M508/Configuration.h | 4 +++ .../Infitary/i3-M508/Configuration_adv.h | 2 ++ .../Intamsys/FunmatHT 4988/Configuration.h | 4 +++ .../FunmatHT 4988/Configuration_adv.h | 2 ++ config/examples/JGAurora/A1/Configuration.h | 4 +++ .../examples/JGAurora/A1/Configuration_adv.h | 2 ++ config/examples/JGAurora/A3/Configuration.h | 4 +++ config/examples/JGAurora/A5/Configuration.h | 4 +++ .../examples/JGAurora/A5/Configuration_adv.h | 2 ++ config/examples/JGAurora/A5S/Configuration.h | 4 +++ .../examples/JGAurora/A5S/Configuration_adv.h | 2 ++ .../examples/JGAurora/Magic/Configuration.h | 4 +++ .../JGAurora/Magic/Configuration_adv.h | 2 ++ config/examples/Kingroon/KP3/Configuration.h | 4 +++ .../examples/Kingroon/KP3/Configuration_adv.h | 2 ++ config/examples/Kingroon/KP3S/Configuration.h | 4 +++ config/examples/Labists/ET4/Configuration.h | 4 +++ .../examples/Labists/ET4/Configuration_adv.h | 2 ++ .../LulzBot/Mini2/Teensy/Configuration.h | 4 +++ .../LulzBot/Mini2/Teensy/Configuration_adv.h | 2 ++ config/examples/LulzBot/TAZ4/Configuration.h | 4 +++ .../examples/LulzBot/TAZ4/Configuration_adv.h | 2 ++ config/examples/MBot/Cube/Configuration.h | 4 +++ config/examples/MBot/Cube/Configuration_adv.h | 2 ++ .../MakerFarm/Pegasus 12/Configuration.h | 4 +++ .../MakerFarm/Pegasus 12/Configuration_adv.h | 2 ++ config/examples/MakerParts/Configuration.h | 4 +++ .../examples/MakerParts/Configuration_adv.h | 2 ++ .../Proforge2sDual/Configuration.h | 4 +++ .../Proforge2sDual/Configuration_adv.h | 2 ++ config/examples/Malyan/M150/Configuration.h | 4 +++ .../examples/Malyan/M150/Configuration_adv.h | 2 ++ config/examples/Malyan/M180/Configuration.h | 4 +++ config/examples/Malyan/M200/Configuration.h | 4 +++ .../examples/Malyan/M200/Configuration_adv.h | 2 ++ .../Micromake/C1/basic/Configuration.h | 4 +++ .../Micromake/C1/enhanced/Configuration.h | 4 +++ .../Micromake/C1/enhanced/Configuration_adv.h | 2 ++ config/examples/Mks/Robin/Configuration.h | 4 +++ .../examples/Mks/Robin_Lite3/Configuration.h | 4 +++ config/examples/Mks/Robin_Pro/Configuration.h | 4 +++ config/examples/Mks/Sbase/Configuration.h | 4 +++ config/examples/Mks/Sbase/Configuration_adv.h | 2 ++ config/examples/Modix/Big60/Configuration.h | 4 +++ .../examples/Modix/Big60/Configuration_adv.h | 2 ++ config/examples/Nextion/Configuration.h | 4 +++ config/examples/Nextion/Configuration_adv.h | 2 ++ .../examples/Opulo/Lumen_REV3/Configuration.h | 4 +++ .../Opulo/Lumen_REV3/Configuration_adv.h | 2 ++ .../examples/Opulo/Lumen_REV4/Configuration.h | 4 +++ .../Opulo/Lumen_REV4/Configuration_adv.h | 2 ++ config/examples/Ortur 4/Configuration.h | 4 +++ config/examples/Ortur 4/Configuration_adv.h | 2 ++ config/examples/Polargraph/Configuration.h | 4 +++ .../examples/Polargraph/Configuration_adv.h | 2 ++ .../Printrbot/PrintrboardG2/Configuration.h | 4 +++ .../Simple Metal RevD/Configuration.h | 4 +++ config/examples/Prusa/MK3/Configuration.h | 4 +++ config/examples/Prusa/MK3/Configuration_adv.h | 2 ++ .../MK3S-BigTreeTech-BTT002/Configuration.h | 4 +++ .../Configuration_adv.h | 2 ++ config/examples/Qidi/Qidi 1/Configuration.h | 4 +++ .../examples/Qidi/Qidi 1/Configuration_adv.h | 2 ++ config/examples/Raiscube/A8r/Configuration.h | 4 +++ .../examples/Raiscube/A8r/Configuration_adv.h | 2 ++ .../examples/RapideLite/RL200/Configuration.h | 4 +++ .../RapideLite/RL200/Configuration_adv.h | 2 ++ .../examples/Renkforce/RF100/Configuration.h | 4 +++ .../Renkforce/RF100/Configuration_adv.h | 2 ++ .../Renkforce/RF100XL/Configuration.h | 4 +++ .../Renkforce/RF100XL/Configuration_adv.h | 2 ++ .../Renkforce/RF100v2/Configuration.h | 4 +++ .../Renkforce/RF100v2/Configuration_adv.h | 2 ++ .../examples/RepRapPro/Huxley/Configuration.h | 4 +++ .../RepRapWorld/Megatronics/Configuration.h | 4 +++ config/examples/RigidBot/Configuration.h | 4 +++ config/examples/RigidBot/Configuration_adv.h | 2 ++ config/examples/Robo3D/R1+/Configuration.h | 4 +++ .../examples/SCARA/MP_SCARA/Configuration.h | 4 +++ .../SCARA/MP_SCARA/Configuration_adv.h | 2 ++ config/examples/SCARA/Morgan/Configuration.h | 4 +++ .../examples/SCARA/Morgan/Configuration_adv.h | 2 ++ .../STM32/Black_STM32F407VET6/Configuration.h | 4 +++ .../Black_STM32F407VET6/Configuration_adv.h | 2 ++ .../STM32/STM32F103RE/Configuration.h | 4 +++ config/examples/Sanguinololu/Configuration.h | 4 +++ .../examples/Sanguinololu/Configuration_adv.h | 2 ++ config/examples/Simulator/Configuration.h | 4 +++ config/examples/Simulator/Configuration_adv.h | 2 ++ .../BigTreeTech SKR E3 Turbo/Configuration.h | 4 +++ .../Configuration_adv.h | 2 ++ .../Configuration.h | 4 +++ .../Configuration_adv.h | 2 ++ .../Configuration.h | 4 +++ .../Configuration_adv.h | 2 ++ .../Sovol/SV-01/CrealityV22/Configuration.h | 4 +++ .../SV-01/CrealityV22/Configuration_adv.h | 2 ++ .../Sovol/SV-01/CrealityV221/Configuration.h | 4 +++ .../SV-01/CrealityV221/Configuration_adv.h | 2 ++ config/examples/Sovol/SV-02/Configuration.h | 4 +++ .../examples/Sovol/SV-02/Configuration_adv.h | 2 ++ config/examples/Sovol/SV-03/Configuration.h | 4 +++ .../examples/Sovol/SV-03/Configuration_adv.h | 2 ++ config/examples/Sunlu/S8/Configuration.h | 4 +++ config/examples/Sunlu/S8/Configuration_adv.h | 2 ++ .../examples/TPARA/AXEL_TPARA/Configuration.h | 4 +++ .../TPARA/AXEL_TPARA/Configuration_adv.h | 2 ++ .../Tevo/Michelangelo/Configuration.h | 4 +++ .../Tevo/Michelangelo/Configuration_adv.h | 2 ++ config/examples/Tevo/Nereus/Configuration.h | 4 +++ .../examples/Tevo/Nereus/Configuration_adv.h | 2 ++ .../Tevo/Tarantula Pro/Configuration.h | 4 +++ .../Tevo/Tarantula Pro/Configuration_adv.h | 2 ++ .../Tornado/V1 (MKS Base)/Configuration.h | 4 +++ .../Tornado/V1 (MKS Base)/Configuration_adv.h | 2 ++ .../Tornado/V2 (MKS GEN-L)/Configuration.h | 4 +++ .../V2 (MKS GEN-L)/Configuration_adv.h | 2 ++ .../Ditto Pro/RAMPS 1.4/Configuration.h | 4 +++ .../Ditto Pro/RAMPS 1.4/Configuration_adv.h | 2 ++ config/examples/TinyBoy2/Configuration.h | 4 +++ config/examples/TinyBoy2/Configuration_adv.h | 2 ++ config/examples/Tronxy/X1/Configuration.h | 4 +++ config/examples/Tronxy/X3A/Configuration.h | 4 +++ .../examples/Tronxy/X3A/Configuration_adv.h | 2 ++ .../Green Board (Chitu V5)/Configuration.h | 4 +++ .../Configuration_adv.h | 2 ++ .../Red Board (Tronxy 3.1.0)/Configuration.h | 4 +++ .../Configuration_adv.h | 2 ++ config/examples/Tronxy/X5S/Configuration.h | 4 +++ .../examples/Tronxy/X5SA-2E/Configuration.h | 4 +++ .../Tronxy/X5SA-2E/Configuration_adv.h | 2 ++ config/examples/Tronxy/X5SA/Configuration.h | 4 +++ .../examples/Tronxy/X5SA/Configuration_adv.h | 2 ++ config/examples/Tronxy/XY100/Configuration.h | 4 +++ .../Two Trees/BlueR Plus/Configuration.h | 4 +++ .../Two Trees/BlueR Plus/Configuration_adv.h | 2 ++ .../Two Trees/BlueR/BlueR V1/Configuration.h | 4 +++ .../BlueR/BlueR V1/Configuration_adv.h | 2 ++ .../Two Trees/BlueR/BlueR V2/Configuration.h | 4 +++ .../BlueR/BlueR V2/Configuration_adv.h | 2 ++ .../Two Trees/BlueR/BlueR V3/Configuration.h | 4 +++ .../BlueR/BlueR V3/Configuration_adv.h | 2 ++ .../Sapphire Plus V2.1/Configuration.h | 4 +++ .../Sapphire Plus V2.1/Configuration_adv.h | 2 ++ .../Sapphire Plus V2/Configuration.h | 4 +++ .../Sapphire Plus V2/Configuration_adv.h | 2 ++ .../Two Trees/Sapphire Pro/Configuration.h | 4 +++ .../Sapphire Pro/Configuration_adv.h | 2 ++ .../UltiMachine/Archim1/Configuration.h | 4 +++ .../UltiMachine/Archim1/Configuration_adv.h | 2 ++ .../UltiMachine/Archim2/Configuration.h | 4 +++ .../UltiMachine/Archim2/Configuration_adv.h | 2 ++ .../Ultimaker/Ultimaker 2+/Configuration.h | 4 +++ .../Ultimaker 2+/Configuration_adv.h | 2 ++ .../Ultimaker/Ultimaker 2/Configuration.h | 4 +++ .../Ultimaker/Ultimaker 2/Configuration_adv.h | 2 ++ .../Configuration.h | 4 +++ .../Configuration_adv.h | 2 ++ .../Configuration.h | 4 +++ .../Configuration_adv.h | 2 ++ .../Configuration.h | 4 +++ .../Configuration_adv.h | 2 ++ config/examples/VORONDesign/Configuration.h | 4 +++ .../examples/VORONDesign/Configuration_adv.h | 2 ++ .../Velleman/K8200 Upgraded/Configuration.h | 4 +++ .../K8200 Upgraded/Configuration_adv.h | 31 +++++++++---------- .../examples/Velleman/K8200/Configuration.h | 4 +++ .../Velleman/K8200/Configuration_adv.h | 2 ++ .../Velleman/K8400/Dual-head/Configuration.h | 4 +++ .../K8400/Dual-head/Configuration_adv.h | 2 ++ .../K8400/Single-head/Configuration.h | 4 +++ .../K8400/Single-head/Configuration_adv.h | 2 ++ .../examples/WASP/PowerWASP/Configuration.h | 4 +++ .../WASP/PowerWASP/Configuration_adv.h | 2 ++ .../Wanhao/Duplicator 4S/Configuration.h | 4 +++ .../Wanhao/Duplicator 4S/Configuration_adv.h | 2 ++ .../Wanhao/Duplicator 6/Configuration.h | 4 +++ .../Wanhao/Duplicator 6/Configuration_adv.h | 2 ++ .../Wanhao/Duplicator i3 2.1/Configuration.h | 4 +++ .../Duplicator i3 2.1/Configuration_adv.h | 2 ++ .../Wanhao/Duplicator i3 Mini/Configuration.h | 4 +++ .../Duplicator i3 Mini/Configuration_adv.h | 2 ++ .../Wanhao/Duplicator i3 Plus/Configuration.h | 4 +++ .../examples/Weedo/Tina2/V2/Configuration.h | 4 +++ .../Weedo/Tina2/V2/Configuration_adv.h | 2 ++ .../examples/Weedo/Tina2/V3/Configuration.h | 4 +++ .../Weedo/Tina2/V3/Configuration_adv.h | 2 ++ config/examples/Weistek/wt150/Configuration.h | 4 +++ .../Weistek/wt150/Configuration_adv.h | 2 ++ .../examples/Zonestar/P802M/Configuration.h | 4 +++ .../Zonestar/P802M/Configuration_adv.h | 2 ++ .../Configuration.h | 4 +++ .../Configuration_adv.h | 2 ++ .../Configuration.h | 4 +++ .../Configuration_adv.h | 2 ++ .../Kossel Linear Plus/Configuration.h | 4 +++ .../Kossel Linear Plus/Configuration_adv.h | 2 ++ .../delta/Anycubic/Kossel/Configuration.h | 4 +++ .../delta/Anycubic/Kossel/Configuration_adv.h | 2 ++ .../delta/Anycubic/Predator/Configuration.h | 4 +++ .../Anycubic/Predator/Configuration_adv.h | 2 ++ .../delta/Dreammaker/Overlord/Configuration.h | 4 +++ .../Dreammaker/Overlord/Configuration_adv.h | 2 ++ .../Dreammaker/Overlord_Pro/Configuration.h | 4 +++ .../Overlord_Pro/Configuration_adv.h | 2 ++ .../delta/FLSUN/Q5-nano_v1/Configuration.h | 4 +++ .../FLSUN/Q5-nano_v1/Configuration_adv.h | 2 ++ .../delta/FLSUN/Q5-nano_v2/Configuration.h | 4 +++ .../examples/delta/FLSUN/QQ-S/Configuration.h | 4 +++ .../delta/FLSUN/QQ-S/Configuration_adv.h | 2 ++ .../delta/FLSUN/QQS-Pro/Configuration.h | 4 +++ .../delta/FLSUN/QQS-Pro/Configuration_adv.h | 2 ++ .../FLSUN/auto_calibrate/Configuration.h | 4 +++ .../FLSUN/auto_calibrate/Configuration_adv.h | 2 ++ .../delta/FLSUN/kossel/Configuration.h | 4 +++ .../delta/FLSUN/kossel/Configuration_adv.h | 2 ++ .../delta/FLSUN/kossel_mini/Configuration.h | 4 +++ .../FLSUN/kossel_mini/Configuration_adv.h | 2 ++ .../delta/Geeetech/G2/Configuration.h | 4 +++ .../delta/Geeetech/G2/Configuration_adv.h | 2 ++ .../delta/Geeetech/G2Pro/Configuration.h | 4 +++ .../delta/Geeetech/G2Pro/Configuration_adv.h | 2 ++ .../delta/Geeetech/G2S/Configuration.h | 4 +++ .../delta/Geeetech/G2S/Configuration_adv.h | 2 ++ .../delta/Geeetech/G2SPro/Configuration.h | 4 +++ .../delta/Geeetech/G2SPro/Configuration_adv.h | 2 ++ .../Geeetech/Rostock 301/Configuration.h | 4 +++ .../Geeetech/Rostock 301/Configuration_adv.h | 2 ++ .../delta/Hatchbox_Alpha/Configuration.h | 4 +++ .../delta/Hatchbox_Alpha/Configuration_adv.h | 2 ++ .../examples/delta/MKS/SBASE/Configuration.h | 4 +++ .../delta/MKS/SBASE/Configuration_adv.h | 2 ++ .../delta/Malyan M300/Configuration.h | 4 +++ .../delta/Malyan M300/Configuration_adv.h | 2 ++ .../delta/Tevo Little Monster/Configuration.h | 4 +++ .../Tevo Little Monster/Configuration_adv.h | 2 ++ .../delta/Velleman/K8800/Configuration.h | 4 +++ .../delta/Velleman/K8800/Configuration_adv.h | 2 ++ config/examples/delta/generic/Configuration.h | 4 +++ .../delta/generic/Configuration_adv.h | 2 ++ .../delta/kossel_clear/Configuration.h | 4 +++ .../delta/kossel_clear/Configuration_adv.h | 2 ++ .../delta/kossel_mini/Configuration.h | 4 +++ .../examples/delta/kossel_pro/Configuration.h | 4 +++ .../examples/delta/kossel_xl/Configuration.h | 4 +++ .../delta/kossel_xl/Configuration_adv.h | 2 ++ .../examples/gCreate/gMax1.5+/Configuration.h | 4 +++ .../gCreate/gMax1.5+/Configuration_adv.h | 2 ++ .../Octopus 8 LINEAR_AXES/Configuration.h | 4 +++ .../Octopus 8 LINEAR_AXES/Configuration_adv.h | 2 ++ .../RAMPS 5 LINEAR_AXES/Configuration.h | 4 +++ .../RAMPS 5 LINEAR_AXES/Configuration_adv.h | 2 ++ config/examples/makibox/Configuration.h | 4 +++ config/examples/makibox/Configuration_adv.h | 2 ++ config/examples/tvrrug/Round2/Configuration.h | 4 +++ .../tvrrug/Round2/Configuration_adv.h | 2 ++ 621 files changed, 1907 insertions(+), 16 deletions(-) diff --git a/config/default/Configuration.h b/config/default/Configuration.h index 67a6646157..4c5e3a5315 100644 --- a/config/default/Configuration.h +++ b/config/default/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/default/Configuration_adv.h b/config/default/Configuration_adv.h index d7986c5a05..b04884228a 100644 --- a/config/default/Configuration_adv.h +++ b/config/default/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/3DFabXYZ/Migbot/Configuration.h b/config/examples/3DFabXYZ/Migbot/Configuration.h index ce3a891a1c..2b4ceb2e52 100644 --- a/config/examples/3DFabXYZ/Migbot/Configuration.h +++ b/config/examples/3DFabXYZ/Migbot/Configuration.h @@ -567,6 +567,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 5 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h index 74c5963aad..9478a9d9b4 100644 --- a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h +++ b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/ADIMLab/Gantry v1/Configuration.h b/config/examples/ADIMLab/Gantry v1/Configuration.h index 812f4ad64c..6b808fcde6 100644 --- a/config/examples/ADIMLab/Gantry v1/Configuration.h +++ b/config/examples/ADIMLab/Gantry v1/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h index 060d5d07be..64e65bf89b 100644 --- a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h +++ b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/ADIMLab/Gantry v2/Configuration.h b/config/examples/ADIMLab/Gantry v2/Configuration.h index 8825dfa185..06341300e1 100644 --- a/config/examples/ADIMLab/Gantry v2/Configuration.h +++ b/config/examples/ADIMLab/Gantry v2/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h index b89054daa4..3d9e3b610b 100644 --- a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h +++ b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Alfawise/U20-bltouch/Configuration.h b/config/examples/Alfawise/U20-bltouch/Configuration.h index 616c4b3b98..be99a6cf07 100644 --- a/config/examples/Alfawise/U20-bltouch/Configuration.h +++ b/config/examples/Alfawise/U20-bltouch/Configuration.h @@ -621,6 +621,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h index b4236ecf0d..1b158f5097 100644 --- a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h +++ b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Alfawise/U20/Configuration.h b/config/examples/Alfawise/U20/Configuration.h index 44462b5d83..eaae1b39ff 100644 --- a/config/examples/Alfawise/U20/Configuration.h +++ b/config/examples/Alfawise/U20/Configuration.h @@ -621,6 +621,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Alfawise/U20/Configuration_adv.h b/config/examples/Alfawise/U20/Configuration_adv.h index 5a2c9c4d2b..dc69e64592 100644 --- a/config/examples/Alfawise/U20/Configuration_adv.h +++ b/config/examples/Alfawise/U20/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/AliExpress/CL-260/Configuration.h b/config/examples/AliExpress/CL-260/Configuration.h index a475c0335a..4d3f031838 100644 --- a/config/examples/AliExpress/CL-260/Configuration.h +++ b/config/examples/AliExpress/CL-260/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/AliExpress/UM2pExt/Configuration.h b/config/examples/AliExpress/UM2pExt/Configuration.h index a065717c3c..720f513122 100644 --- a/config/examples/AliExpress/UM2pExt/Configuration.h +++ b/config/examples/AliExpress/UM2pExt/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/AliExpress/UM2pExt/Configuration_adv.h b/config/examples/AliExpress/UM2pExt/Configuration_adv.h index 84212fa45a..fdfa3f8486 100644 --- a/config/examples/AliExpress/UM2pExt/Configuration_adv.h +++ b/config/examples/AliExpress/UM2pExt/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Anet/A2/Configuration.h b/config/examples/Anet/A2/Configuration.h index ecdabfdfbc..642cca930f 100644 --- a/config/examples/Anet/A2/Configuration.h +++ b/config/examples/Anet/A2/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Anet/A2/Configuration_adv.h b/config/examples/Anet/A2/Configuration_adv.h index dfe4e3a3c5..bf10a87504 100644 --- a/config/examples/Anet/A2/Configuration_adv.h +++ b/config/examples/Anet/A2/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Anet/A2plus/Configuration.h b/config/examples/Anet/A2plus/Configuration.h index 650c9aa6df..622bf6ae5a 100644 --- a/config/examples/Anet/A2plus/Configuration.h +++ b/config/examples/Anet/A2plus/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Anet/A2plus/Configuration_adv.h b/config/examples/Anet/A2plus/Configuration_adv.h index dfe4e3a3c5..bf10a87504 100644 --- a/config/examples/Anet/A2plus/Configuration_adv.h +++ b/config/examples/Anet/A2plus/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Anet/A6/Configuration.h b/config/examples/Anet/A6/Configuration.h index f2b3888639..fd36602f26 100644 --- a/config/examples/Anet/A6/Configuration.h +++ b/config/examples/Anet/A6/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Anet/A6/Configuration_adv.h b/config/examples/Anet/A6/Configuration_adv.h index 4b491774c8..bf9e3a5d0e 100644 --- a/config/examples/Anet/A6/Configuration_adv.h +++ b/config/examples/Anet/A6/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Anet/A8/Configuration.h b/config/examples/Anet/A8/Configuration.h index 7bdaaa2555..1f6dfcd51b 100644 --- a/config/examples/Anet/A8/Configuration.h +++ b/config/examples/Anet/A8/Configuration.h @@ -567,6 +567,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 6 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Anet/A8/Configuration_adv.h b/config/examples/Anet/A8/Configuration_adv.h index 039e638b72..de3a778197 100644 --- a/config/examples/Anet/A8/Configuration_adv.h +++ b/config/examples/Anet/A8/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Anet/A8plus/Configuration.h b/config/examples/Anet/A8plus/Configuration.h index 3bb7f3157a..60144af46c 100644 --- a/config/examples/Anet/A8plus/Configuration.h +++ b/config/examples/Anet/A8plus/Configuration.h @@ -567,6 +567,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 6 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Anet/A8plus/Configuration_adv.h b/config/examples/Anet/A8plus/Configuration_adv.h index 73f48a48ff..0a66babdb2 100644 --- a/config/examples/Anet/A8plus/Configuration_adv.h +++ b/config/examples/Anet/A8plus/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Anet/A9/Configuration.h b/config/examples/Anet/A9/Configuration.h index a9ef6c1770..e15e2acc50 100644 --- a/config/examples/Anet/A9/Configuration.h +++ b/config/examples/Anet/A9/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Anet/A9/Configuration_adv.h b/config/examples/Anet/A9/Configuration_adv.h index 26fabded08..1e3588534f 100644 --- a/config/examples/Anet/A9/Configuration_adv.h +++ b/config/examples/Anet/A9/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Anet/E10/Configuration.h b/config/examples/Anet/E10/Configuration.h index b3c9eb2598..125408bb20 100644 --- a/config/examples/Anet/E10/Configuration.h +++ b/config/examples/Anet/E10/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Anet/E10/Configuration_adv.h b/config/examples/Anet/E10/Configuration_adv.h index dcc79aeab6..fdd2012653 100644 --- a/config/examples/Anet/E10/Configuration_adv.h +++ b/config/examples/Anet/E10/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h b/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h index 5b48843813..508d9593f9 100644 --- a/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h +++ b/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h b/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h index a5676f1bdb..04a2faa7b2 100644 --- a/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h +++ b/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Anet/E16/Stock/Configuration.h b/config/examples/Anet/E16/Stock/Configuration.h index ced067cd55..93d20b020a 100644 --- a/config/examples/Anet/E16/Stock/Configuration.h +++ b/config/examples/Anet/E16/Stock/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Anet/E16/Stock/Configuration_adv.h b/config/examples/Anet/E16/Stock/Configuration_adv.h index 8e79079957..9548002caa 100644 --- a/config/examples/Anet/E16/Stock/Configuration_adv.h +++ b/config/examples/Anet/E16/Stock/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Anet/ET4+/Configuration.h b/config/examples/Anet/ET4+/Configuration.h index 3b1f5bea47..d8d619a5af 100644 --- a/config/examples/Anet/ET4+/Configuration.h +++ b/config/examples/Anet/ET4+/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Anet/ET4+/Configuration_adv.h b/config/examples/Anet/ET4+/Configuration_adv.h index 9602eef69d..7bad11558d 100644 --- a/config/examples/Anet/ET4+/Configuration_adv.h +++ b/config/examples/Anet/ET4+/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Anet/ET4-Pro/Configuration.h b/config/examples/Anet/ET4-Pro/Configuration.h index dd14f9b87c..e307c8c1d4 100644 --- a/config/examples/Anet/ET4-Pro/Configuration.h +++ b/config/examples/Anet/ET4-Pro/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Anet/ET4-Pro/Configuration_adv.h b/config/examples/Anet/ET4-Pro/Configuration_adv.h index 9602eef69d..7bad11558d 100644 --- a/config/examples/Anet/ET4-Pro/Configuration_adv.h +++ b/config/examples/Anet/ET4-Pro/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Anet/ET4/Configuration.h b/config/examples/Anet/ET4/Configuration.h index 9ca167e13c..2e8095cf89 100644 --- a/config/examples/Anet/ET4/Configuration.h +++ b/config/examples/Anet/ET4/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Anet/ET4/Configuration_adv.h b/config/examples/Anet/ET4/Configuration_adv.h index f2f41b77b4..53d25c4e09 100644 --- a/config/examples/Anet/ET4/Configuration_adv.h +++ b/config/examples/Anet/ET4/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Anet/ET4X/Configuration.h b/config/examples/Anet/ET4X/Configuration.h index 8d6c2bf784..836c7e86ed 100644 --- a/config/examples/Anet/ET4X/Configuration.h +++ b/config/examples/Anet/ET4X/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Anet/ET4X/Configuration_adv.h b/config/examples/Anet/ET4X/Configuration_adv.h index f2f41b77b4..53d25c4e09 100644 --- a/config/examples/Anet/ET4X/Configuration_adv.h +++ b/config/examples/Anet/ET4X/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Anet/ET5-Pro/Configuration.h b/config/examples/Anet/ET5-Pro/Configuration.h index adde6488f4..4bb2c26882 100644 --- a/config/examples/Anet/ET5-Pro/Configuration.h +++ b/config/examples/Anet/ET5-Pro/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Anet/ET5-Pro/Configuration_adv.h b/config/examples/Anet/ET5-Pro/Configuration_adv.h index ca6afabd9c..fbcf8ffab8 100644 --- a/config/examples/Anet/ET5-Pro/Configuration_adv.h +++ b/config/examples/Anet/ET5-Pro/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Anet/ET5/Configuration.h b/config/examples/Anet/ET5/Configuration.h index b7becef099..19797e9758 100644 --- a/config/examples/Anet/ET5/Configuration.h +++ b/config/examples/Anet/ET5/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Anet/ET5/Configuration_adv.h b/config/examples/Anet/ET5/Configuration_adv.h index ca6afabd9c..fbcf8ffab8 100644 --- a/config/examples/Anet/ET5/Configuration_adv.h +++ b/config/examples/Anet/ET5/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Anet/ET5X/Configuration.h b/config/examples/Anet/ET5X/Configuration.h index 305bb153cb..6ae792e200 100644 --- a/config/examples/Anet/ET5X/Configuration.h +++ b/config/examples/Anet/ET5X/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Anet/ET5X/Configuration_adv.h b/config/examples/Anet/ET5X/Configuration_adv.h index ca6afabd9c..fbcf8ffab8 100644 --- a/config/examples/Anet/ET5X/Configuration_adv.h +++ b/config/examples/Anet/ET5X/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/AnyCubic/Chiron/Configuration.h b/config/examples/AnyCubic/Chiron/Configuration.h index 2f61e3267c..f3173a87fe 100644 --- a/config/examples/AnyCubic/Chiron/Configuration.h +++ b/config/examples/AnyCubic/Chiron/Configuration.h @@ -570,6 +570,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/AnyCubic/Chiron/Configuration_adv.h b/config/examples/AnyCubic/Chiron/Configuration_adv.h index ecd6a62563..7f2335bf09 100644 --- a/config/examples/AnyCubic/Chiron/Configuration_adv.h +++ b/config/examples/AnyCubic/Chiron/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h index 482b6241c6..ce75322b5a 100644 --- a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h +++ b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h index c159e760a2..81e088f12a 100644 --- a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h +++ b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h index 17acdb9581..e99e3b7757 100644 --- a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h +++ b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h index 954ed1271f..2f85da840b 100644 --- a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h +++ b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h index 49ede80df1..17d3c3b8b8 100644 --- a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h +++ b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h index 37d79e4e49..014783c834 100644 --- a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h +++ b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration.h b/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration.h index 225a97ea13..e93c4d1f95 100644 --- a/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration.h +++ b/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration.h @@ -587,6 +587,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration_adv.h b/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration_adv.h index 77e5225dd5..b1e0179b55 100644 --- a/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration_adv.h +++ b/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration.h b/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration.h index 97f60f0a86..7b7c55f310 100644 --- a/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration.h +++ b/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration.h @@ -573,6 +573,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration_adv.h b/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration_adv.h index e5333ae660..f48a0546a4 100644 --- a/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration_adv.h +++ b/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/AnyCubic/i3/Configuration.h b/config/examples/AnyCubic/i3/Configuration.h index aba454ba79..99fba9e97f 100644 --- a/config/examples/AnyCubic/i3/Configuration.h +++ b/config/examples/AnyCubic/i3/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/AnyCubic/i3/Configuration_adv.h b/config/examples/AnyCubic/i3/Configuration_adv.h index 05a77db6f5..ca7ea91d85 100644 --- a/config/examples/AnyCubic/i3/Configuration_adv.h +++ b/config/examples/AnyCubic/i3/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/ArmEd/Configuration.h b/config/examples/ArmEd/Configuration.h index ff1e15f609..a803394bb3 100644 --- a/config/examples/ArmEd/Configuration.h +++ b/config/examples/ArmEd/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/ArmEd/Configuration_adv.h b/config/examples/ArmEd/Configuration_adv.h index 3922baee57..8ffa24b835 100644 --- a/config/examples/ArmEd/Configuration_adv.h +++ b/config/examples/ArmEd/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Artillery/Genius Pro/Configuration.h b/config/examples/Artillery/Genius Pro/Configuration.h index aca3bedf64..7bac92f466 100644 --- a/config/examples/Artillery/Genius Pro/Configuration.h +++ b/config/examples/Artillery/Genius Pro/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Artillery/Genius Pro/Configuration_adv.h b/config/examples/Artillery/Genius Pro/Configuration_adv.h index 76f1493a14..2a94e0d834 100644 --- a/config/examples/Artillery/Genius Pro/Configuration_adv.h +++ b/config/examples/Artillery/Genius Pro/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Artillery/Genius/BLTouch/Configuration.h b/config/examples/Artillery/Genius/BLTouch/Configuration.h index 5cf162a08e..4699a8b2c7 100644 --- a/config/examples/Artillery/Genius/BLTouch/Configuration.h +++ b/config/examples/Artillery/Genius/BLTouch/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Artillery/Genius/BLTouch/Configuration_adv.h b/config/examples/Artillery/Genius/BLTouch/Configuration_adv.h index 3202e21e66..3c9fa1d378 100644 --- a/config/examples/Artillery/Genius/BLTouch/Configuration_adv.h +++ b/config/examples/Artillery/Genius/BLTouch/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Artillery/Genius/V1/Configuration.h b/config/examples/Artillery/Genius/V1/Configuration.h index a52e9e7e8f..b4844e59e5 100644 --- a/config/examples/Artillery/Genius/V1/Configuration.h +++ b/config/examples/Artillery/Genius/V1/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Artillery/Genius/V1/Configuration_adv.h b/config/examples/Artillery/Genius/V1/Configuration_adv.h index e4684adbbd..ddec095f34 100644 --- a/config/examples/Artillery/Genius/V1/Configuration_adv.h +++ b/config/examples/Artillery/Genius/V1/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Artillery/Hornet/Configuration.h b/config/examples/Artillery/Hornet/Configuration.h index 6dd01e90c7..133d0c2e3d 100644 --- a/config/examples/Artillery/Hornet/Configuration.h +++ b/config/examples/Artillery/Hornet/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Artillery/Hornet/Configuration_adv.h b/config/examples/Artillery/Hornet/Configuration_adv.h index 88ba5d51a4..d7c401e324 100644 --- a/config/examples/Artillery/Hornet/Configuration_adv.h +++ b/config/examples/Artillery/Hornet/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration.h b/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration.h index 03d4a4abc9..2914857216 100644 --- a/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration.h +++ b/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h b/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h index 3354d7b49d..7ae6719782 100644 --- a/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h +++ b/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Artillery/Sidewinder X1/V1/Configuration.h b/config/examples/Artillery/Sidewinder X1/V1/Configuration.h index 44352795f7..8b21e52ae3 100644 --- a/config/examples/Artillery/Sidewinder X1/V1/Configuration.h +++ b/config/examples/Artillery/Sidewinder X1/V1/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h b/config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h index e4684adbbd..ddec095f34 100644 --- a/config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h +++ b/config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Artillery/Sidewinder X2/Configuration.h b/config/examples/Artillery/Sidewinder X2/Configuration.h index d3975dc183..7bb36f89aa 100644 --- a/config/examples/Artillery/Sidewinder X2/Configuration.h +++ b/config/examples/Artillery/Sidewinder X2/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Artillery/Sidewinder X2/Configuration_adv.h b/config/examples/Artillery/Sidewinder X2/Configuration_adv.h index c6d67a0e7b..8cdc76f1c3 100644 --- a/config/examples/Artillery/Sidewinder X2/Configuration_adv.h +++ b/config/examples/Artillery/Sidewinder X2/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Azteeg/X5GT/Configuration.h b/config/examples/Azteeg/X5GT/Configuration.h index 22befef424..57be525d2f 100644 --- a/config/examples/Azteeg/X5GT/Configuration.h +++ b/config/examples/Azteeg/X5GT/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration.h b/config/examples/BIBO/TouchX/cyclops/Configuration.h index e7d20bbb7a..7a8736cae9 100644 --- a/config/examples/BIBO/TouchX/cyclops/Configuration.h +++ b/config/examples/BIBO/TouchX/cyclops/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h index 53c5a4859a..2de0b4f58e 100644 --- a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/BIBO/TouchX/default/Configuration.h b/config/examples/BIBO/TouchX/default/Configuration.h index 193c756977..49df06d1e4 100644 --- a/config/examples/BIBO/TouchX/default/Configuration.h +++ b/config/examples/BIBO/TouchX/default/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/BIBO/TouchX/default/Configuration_adv.h b/config/examples/BIBO/TouchX/default/Configuration_adv.h index a7a76893e0..522217f8c9 100644 --- a/config/examples/BIBO/TouchX/default/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/default/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/BIQU/B1 - SKR 1.4/Configuration.h b/config/examples/BIQU/B1 - SKR 1.4/Configuration.h index b9d8d990bb..3e3269220f 100644 --- a/config/examples/BIQU/B1 - SKR 1.4/Configuration.h +++ b/config/examples/BIQU/B1 - SKR 1.4/Configuration.h @@ -569,6 +569,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/BIQU/B1 - SKR 1.4/Configuration_adv.h b/config/examples/BIQU/B1 - SKR 1.4/Configuration_adv.h index 4481ceee1a..2b61ae0621 100644 --- a/config/examples/BIQU/B1 - SKR 1.4/Configuration_adv.h +++ b/config/examples/BIQU/B1 - SKR 1.4/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/BIQU/B1 - SKR 2/Configuration.h b/config/examples/BIQU/B1 - SKR 2/Configuration.h index d82f1c6ac5..bbe15c3cee 100644 --- a/config/examples/BIQU/B1 - SKR 2/Configuration.h +++ b/config/examples/BIQU/B1 - SKR 2/Configuration.h @@ -569,6 +569,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/BIQU/B1 - SKR 2/Configuration_adv.h b/config/examples/BIQU/B1 - SKR 2/Configuration_adv.h index cd01bb0c95..5e11d25893 100644 --- a/config/examples/BIQU/B1 - SKR 2/Configuration_adv.h +++ b/config/examples/BIQU/B1 - SKR 2/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/BIQU/B1 SE Plus/Configuration.h b/config/examples/BIQU/B1 SE Plus/Configuration.h index d72f71752e..feb58dc817 100644 --- a/config/examples/BIQU/B1 SE Plus/Configuration.h +++ b/config/examples/BIQU/B1 SE Plus/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/BIQU/B1 SE Plus/Configuration_adv.h b/config/examples/BIQU/B1 SE Plus/Configuration_adv.h index 369381a381..4b4045249c 100644 --- a/config/examples/BIQU/B1 SE Plus/Configuration_adv.h +++ b/config/examples/BIQU/B1 SE Plus/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/BIQU/BX/Configuration.h b/config/examples/BIQU/BX/Configuration.h index 470a979e6b..41efcc6e9e 100644 --- a/config/examples/BIQU/BX/Configuration.h +++ b/config/examples/BIQU/BX/Configuration.h @@ -569,6 +569,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/BIQU/BX/Configuration_adv.h b/config/examples/BIQU/BX/Configuration_adv.h index f763d56154..b0172947e0 100644 --- a/config/examples/BIQU/BX/Configuration_adv.h +++ b/config/examples/BIQU/BX/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/BIQU/Thunder Standard/Configuration.h b/config/examples/BIQU/Thunder Standard/Configuration.h index da717e400b..c4b1e05fd2 100644 --- a/config/examples/BIQU/Thunder Standard/Configuration.h +++ b/config/examples/BIQU/Thunder Standard/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/BIQU/Thunder Standard/Configuration_adv.h b/config/examples/BIQU/Thunder Standard/Configuration_adv.h index 9893e80c2d..c54c05003a 100644 --- a/config/examples/BIQU/Thunder Standard/Configuration_adv.h +++ b/config/examples/BIQU/Thunder Standard/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/BQ/Hephestos/Configuration.h b/config/examples/BQ/Hephestos/Configuration.h index 6b76193847..4c4ca9e936 100644 --- a/config/examples/BQ/Hephestos/Configuration.h +++ b/config/examples/BQ/Hephestos/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/BQ/Hephestos/Configuration_adv.h b/config/examples/BQ/Hephestos/Configuration_adv.h index 83302401be..2f1fa09662 100644 --- a/config/examples/BQ/Hephestos/Configuration_adv.h +++ b/config/examples/BQ/Hephestos/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/BQ/Hephestos_2/Configuration.h b/config/examples/BQ/Hephestos_2/Configuration.h index c790fe1eaf..ae0e447806 100644 --- a/config/examples/BQ/Hephestos_2/Configuration.h +++ b/config/examples/BQ/Hephestos_2/Configuration.h @@ -574,6 +574,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/BQ/Hephestos_2/Configuration_adv.h b/config/examples/BQ/Hephestos_2/Configuration_adv.h index b7cb973eb4..819a9b3495 100644 --- a/config/examples/BQ/Hephestos_2/Configuration_adv.h +++ b/config/examples/BQ/Hephestos_2/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/BQ/WITBOX/Configuration.h b/config/examples/BQ/WITBOX/Configuration.h index f23f662e50..eb22a8a262 100644 --- a/config/examples/BQ/WITBOX/Configuration.h +++ b/config/examples/BQ/WITBOX/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/BQ/WITBOX/Configuration_adv.h b/config/examples/BQ/WITBOX/Configuration_adv.h index 83302401be..2f1fa09662 100644 --- a/config/examples/BQ/WITBOX/Configuration_adv.h +++ b/config/examples/BQ/WITBOX/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/CTC/A13/Configuration.h b/config/examples/CTC/A13/Configuration.h index fa577e3a37..9265edcbc0 100644 --- a/config/examples/CTC/A13/Configuration.h +++ b/config/examples/CTC/A13/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/CTC/A13/Configuration_adv.h b/config/examples/CTC/A13/Configuration_adv.h index beca947f5d..3d765ece1d 100644 --- a/config/examples/CTC/A13/Configuration_adv.h +++ b/config/examples/CTC/A13/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/CTC/Bizer/Configuration.h b/config/examples/CTC/Bizer/Configuration.h index a5c49b2356..150a7049ff 100644 --- a/config/examples/CTC/Bizer/Configuration.h +++ b/config/examples/CTC/Bizer/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 1 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/CTC/Bizer/Configuration_adv.h b/config/examples/CTC/Bizer/Configuration_adv.h index 853608a517..7dcef6e9f1 100644 --- a/config/examples/CTC/Bizer/Configuration_adv.h +++ b/config/examples/CTC/Bizer/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h b/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h index ef9bde74c6..ba9d569b38 100644 --- a/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h +++ b/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Cartesio/Configuration.h b/config/examples/Cartesio/Configuration.h index df29840fdb..9a2f4f516e 100644 --- a/config/examples/Cartesio/Configuration.h +++ b/config/examples/Cartesio/Configuration.h @@ -567,6 +567,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 4 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Cartesio/Configuration_adv.h b/config/examples/Cartesio/Configuration_adv.h index c512ff4e1b..672fa3ca19 100644 --- a/config/examples/Cartesio/Configuration_adv.h +++ b/config/examples/Cartesio/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Copymaster3D/300/Configuration.h b/config/examples/Copymaster3D/300/Configuration.h index 8446b30aa5..1f10520006 100644 --- a/config/examples/Copymaster3D/300/Configuration.h +++ b/config/examples/Copymaster3D/300/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Copymaster3D/400/Configuration.h b/config/examples/Copymaster3D/400/Configuration.h index 8872239c0c..93c57eca34 100644 --- a/config/examples/Copymaster3D/400/Configuration.h +++ b/config/examples/Copymaster3D/400/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Copymaster3D/500/Configuration.h b/config/examples/Copymaster3D/500/Configuration.h index d38fb4ec3f..bd1ec7ad39 100644 --- a/config/examples/Copymaster3D/500/Configuration.h +++ b/config/examples/Copymaster3D/500/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration.h index b5320fced5..4ecb26714b 100644 --- a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -575,6 +575,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 7f70664a5d..f1effbfc85 100644 --- a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h index 0e4633c186..8d803da366 100644 --- a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h @@ -575,6 +575,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h index 4c8fe54318..06f8073ed3 100644 --- a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h index e455bd08e2..ca5ee19be9 100644 --- a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h +++ b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h index 2c88201581..e053d2a16a 100644 --- a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h index 24e60bb654..899ddb3e67 100644 --- a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h index abb4dfa15c..15194c4211 100644 --- a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration.h b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration.h index 40c634c876..6d8dabb10a 100644 --- a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration.h +++ b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h index e28b1bdc5c..346ff33f32 100644 --- a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration.h b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration.h index f2429eae90..1587704c70 100644 --- a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration.h +++ b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration_adv.h b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration_adv.h index b5a942579d..84bd1ba48c 100644 --- a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h index b9a94260bd..993312a6bb 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h index abb4dfa15c..15194c4211 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration.h b/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration.h index ed0ddf244a..c0d842a0ef 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration.h +++ b/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration_adv.h b/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration_adv.h index 409381c9d8..f8640441a1 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Creality/CR-10 V2/Configuration.h b/config/examples/Creality/CR-10 V2/Configuration.h index 2bc70d8e44..a1d1521417 100644 --- a/config/examples/Creality/CR-10 V2/Configuration.h +++ b/config/examples/Creality/CR-10 V2/Configuration.h @@ -573,6 +573,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 5 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Creality/CR-10 V2/Configuration_adv.h b/config/examples/Creality/CR-10 V2/Configuration_adv.h index 2be0ff4f3f..df581c9db0 100644 --- a/config/examples/Creality/CR-10 V2/Configuration_adv.h +++ b/config/examples/Creality/CR-10 V2/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Creality/CR-10 V3/Configuration.h b/config/examples/Creality/CR-10 V3/Configuration.h index f4b47a7735..aa7c907006 100644 --- a/config/examples/Creality/CR-10 V3/Configuration.h +++ b/config/examples/Creality/CR-10 V3/Configuration.h @@ -573,6 +573,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 5 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Creality/CR-10 V3/Configuration_adv.h b/config/examples/Creality/CR-10 V3/Configuration_adv.h index 4080bfdb5f..1d14b373cb 100644 --- a/config/examples/Creality/CR-10 V3/Configuration_adv.h +++ b/config/examples/Creality/CR-10 V3/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h index 0a77b245b8..ed19762461 100644 --- a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 1543538a7a..56801e55bf 100644 --- a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Creality/CR-10/CrealityV1/Configuration.h b/config/examples/Creality/CR-10/CrealityV1/Configuration.h index 108b9df4b9..0388f6bb2f 100644 --- a/config/examples/Creality/CR-10/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10/CrealityV1/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h index 64f7e92aa6..f18a913476 100644 --- a/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h index aedc0280f3..677f6d3f55 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h index d11e889d5a..8d3c68bb46 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration.h b/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration.h index 1730ddf8c9..91ea004d94 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration_adv.h index 207bccbe23..f4bba815c3 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h index e3d26b5084..efb4fca40e 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index efa6d78203..68fe57c479 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration.h index fdf554b6b4..cedcd07993 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h index d52d830d35..b414c0c2fa 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Creality/CR-10S/CrealityV1/Configuration.h b/config/examples/Creality/CR-10S/CrealityV1/Configuration.h index 013dd284f5..48596ef1e6 100644 --- a/config/examples/Creality/CR-10S/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10S/CrealityV1/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h index 1e76276c16..402a298041 100644 --- a/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Creality/CR-20 Pro/Configuration.h b/config/examples/Creality/CR-20 Pro/Configuration.h index 04b1df14db..cd4a55ab51 100644 --- a/config/examples/Creality/CR-20 Pro/Configuration.h +++ b/config/examples/Creality/CR-20 Pro/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Creality/CR-20 Pro/Configuration_adv.h b/config/examples/Creality/CR-20 Pro/Configuration_adv.h index 2233fedf92..cce98285ae 100644 --- a/config/examples/Creality/CR-20 Pro/Configuration_adv.h +++ b/config/examples/Creality/CR-20 Pro/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Creality/CR-20/Configuration.h b/config/examples/Creality/CR-20/Configuration.h index 3ae0dafe0f..17892d63d6 100644 --- a/config/examples/Creality/CR-20/Configuration.h +++ b/config/examples/Creality/CR-20/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Creality/CR-20/Configuration_adv.h b/config/examples/Creality/CR-20/Configuration_adv.h index a85e620f81..5381486472 100644 --- a/config/examples/Creality/CR-20/Configuration_adv.h +++ b/config/examples/Creality/CR-20/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Creality/CR-30 PrintMill/Configuration.h b/config/examples/Creality/CR-30 PrintMill/Configuration.h index c34765bde1..c40db31a7a 100644 --- a/config/examples/Creality/CR-30 PrintMill/Configuration.h +++ b/config/examples/Creality/CR-30 PrintMill/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Creality/CR-30 PrintMill/Configuration_adv.h b/config/examples/Creality/CR-30 PrintMill/Configuration_adv.h index 15a69d68cd..afc9460ce6 100644 --- a/config/examples/Creality/CR-30 PrintMill/Configuration_adv.h +++ b/config/examples/Creality/CR-30 PrintMill/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Creality/CR-6 SE/Configuration.h b/config/examples/Creality/CR-6 SE/Configuration.h index 456dd76e2a..6fcf9e5f34 100644 --- a/config/examples/Creality/CR-6 SE/Configuration.h +++ b/config/examples/Creality/CR-6 SE/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Creality/CR-6 SE/Configuration_adv.h b/config/examples/Creality/CR-6 SE/Configuration_adv.h index 8e3ea1be82..84d1c220b7 100644 --- a/config/examples/Creality/CR-6 SE/Configuration_adv.h +++ b/config/examples/Creality/CR-6 SE/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Creality/CR-8/Configuration.h b/config/examples/Creality/CR-8/Configuration.h index d7b0955446..43ba56928b 100644 --- a/config/examples/Creality/CR-8/Configuration.h +++ b/config/examples/Creality/CR-8/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Creality/CR-8/Configuration_adv.h b/config/examples/Creality/CR-8/Configuration_adv.h index 7e168f6944..ec1052682f 100644 --- a/config/examples/Creality/CR-8/Configuration_adv.h +++ b/config/examples/Creality/CR-8/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration.h b/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration.h index ed7fac494c..ad589ff93f 100644 --- a/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration.h +++ b/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration_adv.h b/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration_adv.h index 19a954f030..206f58e341 100644 --- a/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration_adv.h +++ b/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Creality/Ender-2/Configuration.h b/config/examples/Creality/Ender-2/Configuration.h index 5a7e89874d..02e3808876 100644 --- a/config/examples/Creality/Ender-2/Configuration.h +++ b/config/examples/Creality/Ender-2/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Creality/Ender-2/Configuration_adv.h b/config/examples/Creality/Ender-2/Configuration_adv.h index 3755066feb..381b3753b4 100644 --- a/config/examples/Creality/Ender-2/Configuration_adv.h +++ b/config/examples/Creality/Ender-2/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Creality/Ender-3 Max/Configuration.h b/config/examples/Creality/Ender-3 Max/Configuration.h index 041abb0c0e..67ad0d7214 100644 --- a/config/examples/Creality/Ender-3 Max/Configuration.h +++ b/config/examples/Creality/Ender-3 Max/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Creality/Ender-3 Max/Configuration_adv.h b/config/examples/Creality/Ender-3 Max/Configuration_adv.h index d3e32b269b..dc5ce22d02 100644 --- a/config/examples/Creality/Ender-3 Max/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Max/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration.h index 49151ea819..6fcd13fb5a 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h index e9cb44c43a..51499cfcb5 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h index f8d4ed48c0..6768ac149e 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h index 548d4f3235..69a062517d 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h index 75477aa599..b4517a23bf 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index 548d4f3235..69a062517d 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h index c77b82c118..e6c259e8e4 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index c710cc54b1..27fedf88a1 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration.h index ea12df959a..7f029e74a4 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h index 1455f4395d..c163b8b29b 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h index 07ca436190..c8072ea049 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h index 9ac2a188bc..e5dc6c60ea 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h index 3ec80d7a31..a2b3c51aba 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h index cbf6b7064c..80b160457e 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h index 78149b7f39..2054d93e15 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h index 1bf1db63dc..38bd0e13dc 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Creality/Ender-3 S1/STM32F1/Configuration.h b/config/examples/Creality/Ender-3 S1/STM32F1/Configuration.h index ade1608e1a..1eabbf6c44 100644 --- a/config/examples/Creality/Ender-3 S1/STM32F1/Configuration.h +++ b/config/examples/Creality/Ender-3 S1/STM32F1/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Creality/Ender-3 S1/STM32F1/Configuration_adv.h b/config/examples/Creality/Ender-3 S1/STM32F1/Configuration_adv.h index 69d4ad5b24..ae484b0b2e 100644 --- a/config/examples/Creality/Ender-3 S1/STM32F1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 S1/STM32F1/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Creality/Ender-3 S1/STM32F4/Configuration.h b/config/examples/Creality/Ender-3 S1/STM32F4/Configuration.h index 7d773256cd..901b8bbe62 100644 --- a/config/examples/Creality/Ender-3 S1/STM32F4/Configuration.h +++ b/config/examples/Creality/Ender-3 S1/STM32F4/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Creality/Ender-3 S1/STM32F4/Configuration_adv.h b/config/examples/Creality/Ender-3 S1/STM32F4/Configuration_adv.h index 48af72dab4..d1cc614984 100644 --- a/config/examples/Creality/Ender-3 S1/STM32F4/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 S1/STM32F4/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration.h index 2547cda816..fae9cfde56 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration_adv.h index 2464682451..07937073df 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration.h index b970be3fbd..6e0253cd43 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration_adv.h index 15140e6ee0..d14a855397 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration.h index 6a80a0cdc6..6f4d291c57 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration_adv.h index 4907c2c15d..9405daad1e 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration.h index a1d09618d9..3f0a2e1b0c 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration_adv.h index 9be5dfe944..c95c23f761 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration.h b/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration.h index dd43716e5f..3920cc9668 100644 --- a/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration_adv.h index 9754fb2d74..9ad23473d4 100644 --- a/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration.h b/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration.h index 6dd9be1ff5..93006d2164 100644 --- a/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration_adv.h index 0614603709..73413e1fad 100644 --- a/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration.h index fbcd1446fc..4a67b96b53 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h index 3c8edb508e..80bee79639 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration.h index bc03c1f6a9..15dd8c5fab 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h index c1139d2bb6..00073f31d6 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h index 56601178ec..2a70d49d61 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h index 1fef6570c6..207b31168e 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h index e726ee1425..a07c404ac9 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h index 41b164c549..45a03add28 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h index e4578de27c..88c87ae371 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h index 1fef6570c6..207b31168e 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h index d66b3e7591..25ffac5681 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h index 1f008d771f..7de32f3773 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h index e61d9a9269..3e5e295d71 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h index 1e9ad4bec8..d41edbe6b9 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h index 2c64516f99..61ed85f8ee 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index 1e9ad4bec8..d41edbe6b9 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h index d31c864b68..7048abd49c 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index ea945819ab..c33e491a38 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration.h index bc6c8e822b..a09752a230 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h index 7526bd61e4..65e9efc57a 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Creality/Ender-3/CrealityV1/Configuration.h b/config/examples/Creality/Ender-3/CrealityV1/Configuration.h index 63244a9ca4..76f124f6c0 100644 --- a/config/examples/Creality/Ender-3/CrealityV1/Configuration.h +++ b/config/examples/Creality/Ender-3/CrealityV1/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h index 2f1279a431..20863b04ed 100644 --- a/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Creality/Ender-3/CrealityV422/Configuration.h b/config/examples/Creality/Ender-3/CrealityV422/Configuration.h index 43574026ca..9ddbffd0c1 100644 --- a/config/examples/Creality/Ender-3/CrealityV422/Configuration.h +++ b/config/examples/Creality/Ender-3/CrealityV422/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h index 5221a6a4f5..bf87172b97 100644 --- a/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Creality/Ender-3/CrealityV427/Configuration.h b/config/examples/Creality/Ender-3/CrealityV427/Configuration.h index 4bf6682d64..bd53f80a95 100644 --- a/config/examples/Creality/Ender-3/CrealityV427/Configuration.h +++ b/config/examples/Creality/Ender-3/CrealityV427/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h index b0e76f9679..37ec6bb623 100644 --- a/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h index 5aaa07ee8e..5d6406d542 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h index 1b094b8aca..5162cc534c 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h index caf5d2ae32..7b4408f04f 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h index 1b094b8aca..5162cc534c 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration.h index 65c08a4e6e..4228df55e5 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration_adv.h index 265e30b7ae..4e4b57a8be 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h index c678c30173..fff763adea 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h index 1b094b8aca..5162cc534c 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h index d655af5dbe..65a82021dc 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h index 1b094b8aca..5162cc534c 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h index 3b655e7c20..f745e9334f 100644 --- a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h +++ b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h index 4ee707b9b0..fc1e87770f 100644 --- a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration.h b/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration.h index 3b02431373..2bd79f32d5 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h b/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h index 88e18ea3be..ada7ee41fe 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration.h b/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration.h index 602c5daa7e..da095f321f 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h b/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h index bb3c6ea92a..c5c90fca00 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration.h b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration.h index ac4bb3c434..748ece2620 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h index 77af2de6b2..7216bf4eea 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration.h b/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration.h index 2694f1e6c7..ba0644bb5c 100644 --- a/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration.h +++ b/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration_adv.h b/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration_adv.h index 26ef5d5a01..266069430a 100644 --- a/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Creality/Ender-4/Configuration.h b/config/examples/Creality/Ender-4/Configuration.h index 98ba3852d4..a932cb51c5 100644 --- a/config/examples/Creality/Ender-4/Configuration.h +++ b/config/examples/Creality/Ender-4/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Creality/Ender-4/Configuration_adv.h b/config/examples/Creality/Ender-4/Configuration_adv.h index c6052c9f07..833b1d65cb 100644 --- a/config/examples/Creality/Ender-4/Configuration_adv.h +++ b/config/examples/Creality/Ender-4/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Creality/Ender-5 Plus/Configuration.h b/config/examples/Creality/Ender-5 Plus/Configuration.h index da27826e18..9b5f33223d 100644 --- a/config/examples/Creality/Ender-5 Plus/Configuration.h +++ b/config/examples/Creality/Ender-5 Plus/Configuration.h @@ -569,6 +569,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Creality/Ender-5 Plus/Configuration_adv.h b/config/examples/Creality/Ender-5 Plus/Configuration_adv.h index d3fc04b86f..e126e29956 100644 --- a/config/examples/Creality/Ender-5 Plus/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Plus/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration.h index 2ed5f1c823..ab7cf90b99 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration.h @@ -569,6 +569,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h index b791e5950d..22bc2cc2e7 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h index f9470c1c90..546f95fe57 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index 1a38d534a0..c2d6b3fda2 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration.h index ce16373658..817e881fa1 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h index 7adbb616f8..99634f3b25 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration.h b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration.h index 23f76ab583..153e00da5d 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h index ac049ec20f..6baaca82c9 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration.h b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration.h index 7d4fc68e11..251c944a72 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration.h @@ -569,6 +569,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h index 72bd226c0f..50a7a61945 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h index 98e5c677ae..28501d5380 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h index ce8aa42f9c..fcd37fae51 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h index 9874de760f..c9422080a6 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h index b791e5950d..22bc2cc2e7 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration.h index d4668cc1d7..f3a57d91a5 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h index 5e7e1b1280..581f8522a6 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration.h index cabb55a04a..d7fa6a3480 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index 1e9ad4bec8..d41edbe6b9 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h index 698caf187c..b548715f33 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 1c5dfb4a84..64766d138e 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Creality/Ender-5/CrealityV1/Configuration.h b/config/examples/Creality/Ender-5/CrealityV1/Configuration.h index 2fdd1a8bc9..a337acf378 100644 --- a/config/examples/Creality/Ender-5/CrealityV1/Configuration.h +++ b/config/examples/Creality/Ender-5/CrealityV1/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h index 048963cc0c..f8f6fd9844 100644 --- a/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Creality/Ender-5/CrealityV427/Configuration.h b/config/examples/Creality/Ender-5/CrealityV427/Configuration.h index 1bdb5b7a97..18a65087de 100644 --- a/config/examples/Creality/Ender-5/CrealityV427/Configuration.h +++ b/config/examples/Creality/Ender-5/CrealityV427/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h index d7ac52b8d2..8f759e6adc 100644 --- a/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Creality/Ender-6/Configuration.h b/config/examples/Creality/Ender-6/Configuration.h index 677d6fc960..83a8dc30ab 100644 --- a/config/examples/Creality/Ender-6/Configuration.h +++ b/config/examples/Creality/Ender-6/Configuration.h @@ -569,6 +569,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Creality/Ender-6/Configuration_adv.h b/config/examples/Creality/Ender-6/Configuration_adv.h index afa94ec7c2..b137b9f8cb 100644 --- a/config/examples/Creality/Ender-6/Configuration_adv.h +++ b/config/examples/Creality/Ender-6/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration.h b/config/examples/Dagoma/Disco Ultimate/Configuration.h index 557b8e4ed4..222f67da6f 100644 --- a/config/examples/Dagoma/Disco Ultimate/Configuration.h +++ b/config/examples/Dagoma/Disco Ultimate/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 15 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h index e42b056b90..2910a53c1f 100644 --- a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h +++ b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Daycom/3DP-100/Configuration.h b/config/examples/Daycom/3DP-100/Configuration.h index 6a66ff1ffa..98155cc6d7 100644 --- a/config/examples/Daycom/3DP-100/Configuration.h +++ b/config/examples/Daycom/3DP-100/Configuration.h @@ -569,6 +569,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Daycom/3DP-100/Configuration_adv.h b/config/examples/Daycom/3DP-100/Configuration_adv.h index ebaa5c34d4..52b996d7ca 100644 --- a/config/examples/Daycom/3DP-100/Configuration_adv.h +++ b/config/examples/Daycom/3DP-100/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/EXP3D/Imprimante multifonction/Configuration.h b/config/examples/EXP3D/Imprimante multifonction/Configuration.h index abb769db14..c70bfdab6a 100644 --- a/config/examples/EXP3D/Imprimante multifonction/Configuration.h +++ b/config/examples/EXP3D/Imprimante multifonction/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 5 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h b/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h index 0666062868..fdb5d7ec5c 100644 --- a/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h +++ b/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/EasyThreeD/ET4000PLUS/Configuration.h b/config/examples/EasyThreeD/ET4000PLUS/Configuration.h index 1f7466b971..4eda405b0f 100644 --- a/config/examples/EasyThreeD/ET4000PLUS/Configuration.h +++ b/config/examples/EasyThreeD/ET4000PLUS/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/EasyThreeD/ET4000PLUS/Configuration_adv.h b/config/examples/EasyThreeD/ET4000PLUS/Configuration_adv.h index a330015ec4..741a112bd5 100644 --- a/config/examples/EasyThreeD/ET4000PLUS/Configuration_adv.h +++ b/config/examples/EasyThreeD/ET4000PLUS/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Einstart-S/Configuration.h b/config/examples/Einstart-S/Configuration.h index 1731606792..6ff932d362 100644 --- a/config/examples/Einstart-S/Configuration.h +++ b/config/examples/Einstart-S/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Einstart-S/Configuration_adv.h b/config/examples/Einstart-S/Configuration_adv.h index b2128d22f6..2ca4c35c82 100644 --- a/config/examples/Einstart-S/Configuration_adv.h +++ b/config/examples/Einstart-S/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Elegoo/Neptune 2/Configuration.h b/config/examples/Elegoo/Neptune 2/Configuration.h index 6c7b49c01c..06d6713b9e 100644 --- a/config/examples/Elegoo/Neptune 2/Configuration.h +++ b/config/examples/Elegoo/Neptune 2/Configuration.h @@ -599,6 +599,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 3 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Elegoo/Neptune 2/Configuration_adv.h b/config/examples/Elegoo/Neptune 2/Configuration_adv.h index 472f7e720a..d9ed91f0e5 100644 --- a/config/examples/Elegoo/Neptune 2/Configuration_adv.h +++ b/config/examples/Elegoo/Neptune 2/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Eryone/Thinker SE/Configuration.h b/config/examples/Eryone/Thinker SE/Configuration.h index 5aef736800..c7e88577af 100644 --- a/config/examples/Eryone/Thinker SE/Configuration.h +++ b/config/examples/Eryone/Thinker SE/Configuration.h @@ -574,6 +574,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Eryone/Thinker SE/Configuration_adv.h b/config/examples/Eryone/Thinker SE/Configuration_adv.h index e4643b61d9..2ad11f4e10 100644 --- a/config/examples/Eryone/Thinker SE/Configuration_adv.h +++ b/config/examples/Eryone/Thinker SE/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Eryone/Thinker V2/Configuration.h b/config/examples/Eryone/Thinker V2/Configuration.h index fe2d7aba96..2807df2e94 100644 --- a/config/examples/Eryone/Thinker V2/Configuration.h +++ b/config/examples/Eryone/Thinker V2/Configuration.h @@ -573,6 +573,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Eryone/Thinker V2/Configuration_adv.h b/config/examples/Eryone/Thinker V2/Configuration_adv.h index 5266563b7f..818574d96f 100644 --- a/config/examples/Eryone/Thinker V2/Configuration_adv.h +++ b/config/examples/Eryone/Thinker V2/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/FYSETC/AIO_II/Configuration.h b/config/examples/FYSETC/AIO_II/Configuration.h index 0cbff3de4d..70f841d02d 100644 --- a/config/examples/FYSETC/AIO_II/Configuration.h +++ b/config/examples/FYSETC/AIO_II/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/FYSETC/AIO_II/Configuration_adv.h b/config/examples/FYSETC/AIO_II/Configuration_adv.h index a5c41ba57a..6a13431cdc 100644 --- a/config/examples/FYSETC/AIO_II/Configuration_adv.h +++ b/config/examples/FYSETC/AIO_II/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/FYSETC/F6_13/Configuration.h b/config/examples/FYSETC/F6_13/Configuration.h index 6c8f3404d0..bd2d0d2f64 100644 --- a/config/examples/FYSETC/F6_13/Configuration.h +++ b/config/examples/FYSETC/F6_13/Configuration.h @@ -568,6 +568,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/FYSETC/F6_13/Configuration_adv.h b/config/examples/FYSETC/F6_13/Configuration_adv.h index da4474045f..648b88f659 100644 --- a/config/examples/FYSETC/F6_13/Configuration_adv.h +++ b/config/examples/FYSETC/F6_13/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/FYSETC/S6/Configuration.h b/config/examples/FYSETC/S6/Configuration.h index b286c27c41..5bee13a9f0 100644 --- a/config/examples/FYSETC/S6/Configuration.h +++ b/config/examples/FYSETC/S6/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/FYSETC/S6/Configuration_adv.h b/config/examples/FYSETC/S6/Configuration_adv.h index 0716259b58..fad07167e4 100644 --- a/config/examples/FYSETC/S6/Configuration_adv.h +++ b/config/examples/FYSETC/S6/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Felix/DUAL/Configuration.h b/config/examples/Felix/DUAL/Configuration.h index 243efb7505..d15300072b 100644 --- a/config/examples/Felix/DUAL/Configuration.h +++ b/config/examples/Felix/DUAL/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 15 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Felix/DUAL/Configuration_adv.h b/config/examples/Felix/DUAL/Configuration_adv.h index cab87ac8ef..2c12500599 100644 --- a/config/examples/Felix/DUAL/Configuration_adv.h +++ b/config/examples/Felix/DUAL/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Felix/Single/Configuration.h b/config/examples/Felix/Single/Configuration.h index be3018bef9..fe51ffbaac 100644 --- a/config/examples/Felix/Single/Configuration.h +++ b/config/examples/Felix/Single/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 15 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Felix/Single/Configuration_adv.h b/config/examples/Felix/Single/Configuration_adv.h index cab87ac8ef..2c12500599 100644 --- a/config/examples/Felix/Single/Configuration_adv.h +++ b/config/examples/Felix/Single/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/FlashForge/Creator 2X/Configuration.h b/config/examples/FlashForge/Creator 2X/Configuration.h index 32d5382b1e..d24ec8b8b6 100644 --- a/config/examples/FlashForge/Creator 2X/Configuration.h +++ b/config/examples/FlashForge/Creator 2X/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 0 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/FlashForge/Creator 2X/Configuration_adv.h b/config/examples/FlashForge/Creator 2X/Configuration_adv.h index 55d0489eab..c0aa666b39 100644 --- a/config/examples/FlashForge/Creator 2X/Configuration_adv.h +++ b/config/examples/FlashForge/Creator 2X/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/FlashForge/CreatorPro/Configuration.h b/config/examples/FlashForge/CreatorPro/Configuration.h index 4a173418d6..e346ea0c96 100644 --- a/config/examples/FlashForge/CreatorPro/Configuration.h +++ b/config/examples/FlashForge/CreatorPro/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 0 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/FlashForge/CreatorPro/Configuration_adv.h b/config/examples/FlashForge/CreatorPro/Configuration_adv.h index 2c84010d7f..ac0c2f0f15 100644 --- a/config/examples/FlashForge/CreatorPro/Configuration_adv.h +++ b/config/examples/FlashForge/CreatorPro/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/FlyingBear/P902/Configuration.h b/config/examples/FlyingBear/P902/Configuration.h index 525e2f6212..010732fa94 100644 --- a/config/examples/FlyingBear/P902/Configuration.h +++ b/config/examples/FlyingBear/P902/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/FlyingBear/P902/Configuration_adv.h b/config/examples/FlyingBear/P902/Configuration_adv.h index c4811d6357..47c799ee1a 100644 --- a/config/examples/FlyingBear/P902/Configuration_adv.h +++ b/config/examples/FlyingBear/P902/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/FlyingBear/P905H/Configuration.h b/config/examples/FlyingBear/P905H/Configuration.h index 5f062ebdf9..2399faee85 100644 --- a/config/examples/FlyingBear/P905H/Configuration.h +++ b/config/examples/FlyingBear/P905H/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/FlyingBear/P905H/Configuration_adv.h b/config/examples/FlyingBear/P905H/Configuration_adv.h index 185b32b722..480f88a66d 100644 --- a/config/examples/FlyingBear/P905H/Configuration_adv.h +++ b/config/examples/FlyingBear/P905H/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/FoamCutter/generic/Configuration.h b/config/examples/FoamCutter/generic/Configuration.h index 85a23203bd..ca641bc954 100644 --- a/config/examples/FoamCutter/generic/Configuration.h +++ b/config/examples/FoamCutter/generic/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/FoamCutter/rcKeith/Configuration.h b/config/examples/FoamCutter/rcKeith/Configuration.h index 336de360d6..a84b7dcaf9 100644 --- a/config/examples/FoamCutter/rcKeith/Configuration.h +++ b/config/examples/FoamCutter/rcKeith/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/FoamCutter/rcKeith/Configuration_adv.h b/config/examples/FoamCutter/rcKeith/Configuration_adv.h index 78c02712cd..77a04b98e1 100644 --- a/config/examples/FoamCutter/rcKeith/Configuration_adv.h +++ b/config/examples/FoamCutter/rcKeith/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/FolgerTech/FT-5 R2/Configuration.h b/config/examples/FolgerTech/FT-5 R2/Configuration.h index 278482d5ac..94111ef6f3 100644 --- a/config/examples/FolgerTech/FT-5 R2/Configuration.h +++ b/config/examples/FolgerTech/FT-5 R2/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/FolgerTech/FT-5 R2/Configuration_adv.h b/config/examples/FolgerTech/FT-5 R2/Configuration_adv.h index 364dca4416..9d6b5e60ef 100644 --- a/config/examples/FolgerTech/FT-5 R2/Configuration_adv.h +++ b/config/examples/FolgerTech/FT-5 R2/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/FolgerTech/i3-2020/Configuration.h b/config/examples/FolgerTech/i3-2020/Configuration.h index 442b39500a..151878943e 100644 --- a/config/examples/FolgerTech/i3-2020/Configuration.h +++ b/config/examples/FolgerTech/i3-2020/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/config/examples/FolgerTech/i3-2020/Configuration_adv.h index ea4728e3d2..a5e194e287 100644 --- a/config/examples/FolgerTech/i3-2020/Configuration_adv.h +++ b/config/examples/FolgerTech/i3-2020/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Formbot/Raptor/Configuration.h b/config/examples/Formbot/Raptor/Configuration.h index b7cc748805..2296505b5f 100644 --- a/config/examples/Formbot/Raptor/Configuration.h +++ b/config/examples/Formbot/Raptor/Configuration.h @@ -613,6 +613,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Formbot/Raptor/Configuration_adv.h b/config/examples/Formbot/Raptor/Configuration_adv.h index cc490334a8..dd35865cd5 100644 --- a/config/examples/Formbot/Raptor/Configuration_adv.h +++ b/config/examples/Formbot/Raptor/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Formbot/T_Rex_2+/Configuration.h b/config/examples/Formbot/T_Rex_2+/Configuration.h index cc20b5f3c5..0cb3887832 100644 --- a/config/examples/Formbot/T_Rex_2+/Configuration.h +++ b/config/examples/Formbot/T_Rex_2+/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 3 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h index 81f011317d..0988aa4f8e 100644 --- a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h +++ b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Formbot/T_Rex_3/Configuration.h b/config/examples/Formbot/T_Rex_3/Configuration.h index fc33c62c8e..0abf732381 100644 --- a/config/examples/Formbot/T_Rex_3/Configuration.h +++ b/config/examples/Formbot/T_Rex_3/Configuration.h @@ -569,6 +569,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Formbot/T_Rex_3/Configuration_adv.h b/config/examples/Formbot/T_Rex_3/Configuration_adv.h index a24605a4fd..a1311d8d27 100644 --- a/config/examples/Formbot/T_Rex_3/Configuration_adv.h +++ b/config/examples/Formbot/T_Rex_3/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Geeetech/A10/Configuration.h b/config/examples/Geeetech/A10/Configuration.h index 39dce2fef2..66fa2ef899 100644 --- a/config/examples/Geeetech/A10/Configuration.h +++ b/config/examples/Geeetech/A10/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Geeetech/A10/Configuration_adv.h b/config/examples/Geeetech/A10/Configuration_adv.h index 55c3c2ee4c..0bb1ae9635 100644 --- a/config/examples/Geeetech/A10/Configuration_adv.h +++ b/config/examples/Geeetech/A10/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Geeetech/A10D/Configuration.h b/config/examples/Geeetech/A10D/Configuration.h index c5ba788561..db797fd024 100644 --- a/config/examples/Geeetech/A10D/Configuration.h +++ b/config/examples/Geeetech/A10D/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Geeetech/A10D/Configuration_adv.h b/config/examples/Geeetech/A10D/Configuration_adv.h index b7ab6501ec..c10c636f90 100644 --- a/config/examples/Geeetech/A10D/Configuration_adv.h +++ b/config/examples/Geeetech/A10D/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Geeetech/A10M/Stock LCD/Configuration.h b/config/examples/Geeetech/A10M/Stock LCD/Configuration.h index e9c648f5b4..286e3c3af6 100644 --- a/config/examples/Geeetech/A10M/Stock LCD/Configuration.h +++ b/config/examples/Geeetech/A10M/Stock LCD/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Geeetech/A10M/Stock LCD/Configuration_adv.h b/config/examples/Geeetech/A10M/Stock LCD/Configuration_adv.h index 9617be4fca..c8a7d4714d 100644 --- a/config/examples/Geeetech/A10M/Stock LCD/Configuration_adv.h +++ b/config/examples/Geeetech/A10M/Stock LCD/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration.h b/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration.h index 7019f30070..466acaa672 100644 --- a/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration.h +++ b/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration_adv.h b/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration_adv.h index 9617be4fca..c8a7d4714d 100644 --- a/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration_adv.h +++ b/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Geeetech/A10PRO/Configuration.h b/config/examples/Geeetech/A10PRO/Configuration.h index 767664b62a..7c82ba81aa 100644 --- a/config/examples/Geeetech/A10PRO/Configuration.h +++ b/config/examples/Geeetech/A10PRO/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Geeetech/A10PRO/Configuration_adv.h b/config/examples/Geeetech/A10PRO/Configuration_adv.h index 55c3c2ee4c..0bb1ae9635 100644 --- a/config/examples/Geeetech/A10PRO/Configuration_adv.h +++ b/config/examples/Geeetech/A10PRO/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Geeetech/A10T/Stock LCD/Configuration.h b/config/examples/Geeetech/A10T/Stock LCD/Configuration.h index 9a26dc925a..9923d63bb8 100644 --- a/config/examples/Geeetech/A10T/Stock LCD/Configuration.h +++ b/config/examples/Geeetech/A10T/Stock LCD/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Geeetech/A10T/Stock LCD/Configuration_adv.h b/config/examples/Geeetech/A10T/Stock LCD/Configuration_adv.h index 9617be4fca..c8a7d4714d 100644 --- a/config/examples/Geeetech/A10T/Stock LCD/Configuration_adv.h +++ b/config/examples/Geeetech/A10T/Stock LCD/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration.h b/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration.h index aac9cae394..632750b180 100644 --- a/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration.h +++ b/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration_adv.h b/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration_adv.h index 9617be4fca..c8a7d4714d 100644 --- a/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration_adv.h +++ b/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Geeetech/A20/Configuration.h b/config/examples/Geeetech/A20/Configuration.h index e23e6f3be3..281317579c 100644 --- a/config/examples/Geeetech/A20/Configuration.h +++ b/config/examples/Geeetech/A20/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Geeetech/A20/Configuration_adv.h b/config/examples/Geeetech/A20/Configuration_adv.h index 9da5674d08..8bd7b1cec1 100644 --- a/config/examples/Geeetech/A20/Configuration_adv.h +++ b/config/examples/Geeetech/A20/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Geeetech/A20M/Configuration.h b/config/examples/Geeetech/A20M/Configuration.h index 63c1dae0a3..d322f63855 100644 --- a/config/examples/Geeetech/A20M/Configuration.h +++ b/config/examples/Geeetech/A20M/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Geeetech/A20M/Configuration_adv.h b/config/examples/Geeetech/A20M/Configuration_adv.h index 9da5674d08..8bd7b1cec1 100644 --- a/config/examples/Geeetech/A20M/Configuration_adv.h +++ b/config/examples/Geeetech/A20M/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Geeetech/A20T/Configuration.h b/config/examples/Geeetech/A20T/Configuration.h index d38b35ff35..a3c268919d 100644 --- a/config/examples/Geeetech/A20T/Configuration.h +++ b/config/examples/Geeetech/A20T/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Geeetech/A20T/Configuration_adv.h b/config/examples/Geeetech/A20T/Configuration_adv.h index 9da5674d08..8bd7b1cec1 100644 --- a/config/examples/Geeetech/A20T/Configuration_adv.h +++ b/config/examples/Geeetech/A20T/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Geeetech/A30/Configuration.h b/config/examples/Geeetech/A30/Configuration.h index caca56b76f..5a8c8355f9 100644 --- a/config/examples/Geeetech/A30/Configuration.h +++ b/config/examples/Geeetech/A30/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 5 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Geeetech/A30/Configuration_adv.h b/config/examples/Geeetech/A30/Configuration_adv.h index a199e7a534..c5b0d56087 100644 --- a/config/examples/Geeetech/A30/Configuration_adv.h +++ b/config/examples/Geeetech/A30/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Geeetech/A30M/Configuration.h b/config/examples/Geeetech/A30M/Configuration.h index 6976e56ebd..4848ecacb3 100644 --- a/config/examples/Geeetech/A30M/Configuration.h +++ b/config/examples/Geeetech/A30M/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 5 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Geeetech/A30M/Configuration_adv.h b/config/examples/Geeetech/A30M/Configuration_adv.h index a199e7a534..c5b0d56087 100644 --- a/config/examples/Geeetech/A30M/Configuration_adv.h +++ b/config/examples/Geeetech/A30M/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Geeetech/A30T/Configuration.h b/config/examples/Geeetech/A30T/Configuration.h index 262c0eb207..0b9e7cc07d 100644 --- a/config/examples/Geeetech/A30T/Configuration.h +++ b/config/examples/Geeetech/A30T/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 5 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Geeetech/A30T/Configuration_adv.h b/config/examples/Geeetech/A30T/Configuration_adv.h index a199e7a534..c5b0d56087 100644 --- a/config/examples/Geeetech/A30T/Configuration_adv.h +++ b/config/examples/Geeetech/A30T/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Geeetech/D200/Configuration.h b/config/examples/Geeetech/D200/Configuration.h index e609043c8d..fb882b01d0 100644 --- a/config/examples/Geeetech/D200/Configuration.h +++ b/config/examples/Geeetech/D200/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 5 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Geeetech/D200/Configuration_adv.h b/config/examples/Geeetech/D200/Configuration_adv.h index 93a9d6f18e..e9739c3b16 100644 --- a/config/examples/Geeetech/D200/Configuration_adv.h +++ b/config/examples/Geeetech/D200/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Geeetech/Duplicator5/Configuration.h b/config/examples/Geeetech/Duplicator5/Configuration.h index 6cced736e4..7dc7bb748f 100644 --- a/config/examples/Geeetech/Duplicator5/Configuration.h +++ b/config/examples/Geeetech/Duplicator5/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Geeetech/Duplicator5/Configuration_adv.h b/config/examples/Geeetech/Duplicator5/Configuration_adv.h index 0716259b58..fad07167e4 100644 --- a/config/examples/Geeetech/Duplicator5/Configuration_adv.h +++ b/config/examples/Geeetech/Duplicator5/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Geeetech/E180/Configuration.h b/config/examples/Geeetech/E180/Configuration.h index 2b2120e126..32cda6a467 100644 --- a/config/examples/Geeetech/E180/Configuration.h +++ b/config/examples/Geeetech/E180/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 5 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Geeetech/E180/Configuration_adv.h b/config/examples/Geeetech/E180/Configuration_adv.h index a199e7a534..c5b0d56087 100644 --- a/config/examples/Geeetech/E180/Configuration_adv.h +++ b/config/examples/Geeetech/E180/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Geeetech/GT2560/Configuration.h b/config/examples/Geeetech/GT2560/Configuration.h index d7a320159e..61c1269cc3 100644 --- a/config/examples/Geeetech/GT2560/Configuration.h +++ b/config/examples/Geeetech/GT2560/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h index 5e35e567fb..3d2ae18dfe 100644 --- a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h +++ b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Geeetech/M201/Configuration.h b/config/examples/Geeetech/M201/Configuration.h index ef88097da8..2746bd8c84 100644 --- a/config/examples/Geeetech/M201/Configuration.h +++ b/config/examples/Geeetech/M201/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 5 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Geeetech/M201/Configuration_adv.h b/config/examples/Geeetech/M201/Configuration_adv.h index 93a9d6f18e..e9739c3b16 100644 --- a/config/examples/Geeetech/M201/Configuration_adv.h +++ b/config/examples/Geeetech/M201/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Geeetech/MeCreator2/Configuration.h b/config/examples/Geeetech/MeCreator2/Configuration.h index 8766f06cc3..810bd06daa 100644 --- a/config/examples/Geeetech/MeCreator2/Configuration.h +++ b/config/examples/Geeetech/MeCreator2/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Geeetech/MeCreator2/Configuration_adv.h b/config/examples/Geeetech/MeCreator2/Configuration_adv.h index 6a9173ccf7..7e177c0227 100644 --- a/config/examples/Geeetech/MeCreator2/Configuration_adv.h +++ b/config/examples/Geeetech/MeCreator2/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Geeetech/Me_creator/Configuration.h b/config/examples/Geeetech/Me_creator/Configuration.h index b21d69dfac..5f38028e75 100644 --- a/config/examples/Geeetech/Me_creator/Configuration.h +++ b/config/examples/Geeetech/Me_creator/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Geeetech/Me_creator/Configuration_adv.h b/config/examples/Geeetech/Me_creator/Configuration_adv.h index 0716259b58..fad07167e4 100644 --- a/config/examples/Geeetech/Me_creator/Configuration_adv.h +++ b/config/examples/Geeetech/Me_creator/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Geeetech/Me_ducer/Configuration.h b/config/examples/Geeetech/Me_ducer/Configuration.h index c186c60df4..5fe118178d 100644 --- a/config/examples/Geeetech/Me_ducer/Configuration.h +++ b/config/examples/Geeetech/Me_ducer/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Geeetech/Me_ducer/Configuration_adv.h b/config/examples/Geeetech/Me_ducer/Configuration_adv.h index 55e1c7b761..f5245b6602 100644 --- a/config/examples/Geeetech/Me_ducer/Configuration_adv.h +++ b/config/examples/Geeetech/Me_ducer/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Geeetech/PI3A PRO/Configuration.h b/config/examples/Geeetech/PI3A PRO/Configuration.h index 5f2c1cb774..98ac182f91 100644 --- a/config/examples/Geeetech/PI3A PRO/Configuration.h +++ b/config/examples/Geeetech/PI3A PRO/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Geeetech/PI3A PRO/Configuration_adv.h b/config/examples/Geeetech/PI3A PRO/Configuration_adv.h index 5478b4c32a..5c37daa696 100644 --- a/config/examples/Geeetech/PI3A PRO/Configuration_adv.h +++ b/config/examples/Geeetech/PI3A PRO/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h index 8c46a30219..bdb70ee3ac 100644 --- a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h index efbf0ed75a..e010bf0ab0 100644 --- a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h index 8c05c3858c..a768cd43fc 100644 --- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h index 55c3c2ee4c..0bb1ae9635 100644 --- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h index 7dacfbe2b7..3fbe7d7c1d 100644 --- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h index 55c3c2ee4c..0bb1ae9635 100644 --- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/HMS434/Configuration.h b/config/examples/HMS434/Configuration.h index da5ac88bd8..065e4ff2e5 100644 --- a/config/examples/HMS434/Configuration.h +++ b/config/examples/HMS434/Configuration.h @@ -564,6 +564,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/HMS434/Configuration_adv.h b/config/examples/HMS434/Configuration_adv.h index 5f2efadf15..7df5341538 100644 --- a/config/examples/HMS434/Configuration_adv.h +++ b/config/examples/HMS434/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Infitary/i3-M508/Configuration.h b/config/examples/Infitary/i3-M508/Configuration.h index 8d679a724e..1174138831 100644 --- a/config/examples/Infitary/i3-M508/Configuration.h +++ b/config/examples/Infitary/i3-M508/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Infitary/i3-M508/Configuration_adv.h b/config/examples/Infitary/i3-M508/Configuration_adv.h index 7d9ad408e5..11753560be 100644 --- a/config/examples/Infitary/i3-M508/Configuration_adv.h +++ b/config/examples/Infitary/i3-M508/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Intamsys/FunmatHT 4988/Configuration.h b/config/examples/Intamsys/FunmatHT 4988/Configuration.h index 4541a08bc6..214e77787b 100644 --- a/config/examples/Intamsys/FunmatHT 4988/Configuration.h +++ b/config/examples/Intamsys/FunmatHT 4988/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 3 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h b/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h index 458fb88328..02771266b8 100644 --- a/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h +++ b/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/JGAurora/A1/Configuration.h b/config/examples/JGAurora/A1/Configuration.h index 5b51f5d542..df23b0272a 100644 --- a/config/examples/JGAurora/A1/Configuration.h +++ b/config/examples/JGAurora/A1/Configuration.h @@ -567,6 +567,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/JGAurora/A1/Configuration_adv.h b/config/examples/JGAurora/A1/Configuration_adv.h index bea3e95e47..17f7a149b5 100644 --- a/config/examples/JGAurora/A1/Configuration_adv.h +++ b/config/examples/JGAurora/A1/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/JGAurora/A3/Configuration.h b/config/examples/JGAurora/A3/Configuration.h index 7bc333c201..18992e0244 100644 --- a/config/examples/JGAurora/A3/Configuration.h +++ b/config/examples/JGAurora/A3/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/JGAurora/A5/Configuration.h b/config/examples/JGAurora/A5/Configuration.h index ae44f9a24c..4d290eb053 100644 --- a/config/examples/JGAurora/A5/Configuration.h +++ b/config/examples/JGAurora/A5/Configuration.h @@ -571,6 +571,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/JGAurora/A5/Configuration_adv.h b/config/examples/JGAurora/A5/Configuration_adv.h index f81c87c116..58ca1a6756 100644 --- a/config/examples/JGAurora/A5/Configuration_adv.h +++ b/config/examples/JGAurora/A5/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/JGAurora/A5S/Configuration.h b/config/examples/JGAurora/A5S/Configuration.h index 8bc3967c23..0ad4968d3f 100644 --- a/config/examples/JGAurora/A5S/Configuration.h +++ b/config/examples/JGAurora/A5S/Configuration.h @@ -567,6 +567,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/JGAurora/A5S/Configuration_adv.h b/config/examples/JGAurora/A5S/Configuration_adv.h index 370f812c45..e8ab5e9601 100644 --- a/config/examples/JGAurora/A5S/Configuration_adv.h +++ b/config/examples/JGAurora/A5S/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/JGAurora/Magic/Configuration.h b/config/examples/JGAurora/Magic/Configuration.h index d8f2c0196e..4bd7c7905a 100644 --- a/config/examples/JGAurora/Magic/Configuration.h +++ b/config/examples/JGAurora/Magic/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/JGAurora/Magic/Configuration_adv.h b/config/examples/JGAurora/Magic/Configuration_adv.h index fe14a66e41..e0b01f04cd 100644 --- a/config/examples/JGAurora/Magic/Configuration_adv.h +++ b/config/examples/JGAurora/Magic/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Kingroon/KP3/Configuration.h b/config/examples/Kingroon/KP3/Configuration.h index 7e622777c8..1954911e68 100644 --- a/config/examples/Kingroon/KP3/Configuration.h +++ b/config/examples/Kingroon/KP3/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 5 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Kingroon/KP3/Configuration_adv.h b/config/examples/Kingroon/KP3/Configuration_adv.h index 763c666fd5..09d0e61103 100644 --- a/config/examples/Kingroon/KP3/Configuration_adv.h +++ b/config/examples/Kingroon/KP3/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Kingroon/KP3S/Configuration.h b/config/examples/Kingroon/KP3S/Configuration.h index 6877ecbf64..e45d8db038 100644 --- a/config/examples/Kingroon/KP3S/Configuration.h +++ b/config/examples/Kingroon/KP3S/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Labists/ET4/Configuration.h b/config/examples/Labists/ET4/Configuration.h index ee7daa4fc1..ae4509978e 100644 --- a/config/examples/Labists/ET4/Configuration.h +++ b/config/examples/Labists/ET4/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Labists/ET4/Configuration_adv.h b/config/examples/Labists/ET4/Configuration_adv.h index 9602eef69d..7bad11558d 100644 --- a/config/examples/Labists/ET4/Configuration_adv.h +++ b/config/examples/Labists/ET4/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/LulzBot/Mini2/Teensy/Configuration.h b/config/examples/LulzBot/Mini2/Teensy/Configuration.h index ed32d675e9..50ea5f54b3 100644 --- a/config/examples/LulzBot/Mini2/Teensy/Configuration.h +++ b/config/examples/LulzBot/Mini2/Teensy/Configuration.h @@ -585,6 +585,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 1 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/LulzBot/Mini2/Teensy/Configuration_adv.h b/config/examples/LulzBot/Mini2/Teensy/Configuration_adv.h index 66f572e020..c094ff8d8d 100644 --- a/config/examples/LulzBot/Mini2/Teensy/Configuration_adv.h +++ b/config/examples/LulzBot/Mini2/Teensy/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/LulzBot/TAZ4/Configuration.h b/config/examples/LulzBot/TAZ4/Configuration.h index bb6a9389fb..d5e660b87b 100644 --- a/config/examples/LulzBot/TAZ4/Configuration.h +++ b/config/examples/LulzBot/TAZ4/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/LulzBot/TAZ4/Configuration_adv.h b/config/examples/LulzBot/TAZ4/Configuration_adv.h index 461552da31..b2d34f9eed 100644 --- a/config/examples/LulzBot/TAZ4/Configuration_adv.h +++ b/config/examples/LulzBot/TAZ4/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/MBot/Cube/Configuration.h b/config/examples/MBot/Cube/Configuration.h index b98c82f6a9..30bd7ab455 100644 --- a/config/examples/MBot/Cube/Configuration.h +++ b/config/examples/MBot/Cube/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 0 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/MBot/Cube/Configuration_adv.h b/config/examples/MBot/Cube/Configuration_adv.h index 40e5e958e0..f7da45bb72 100644 --- a/config/examples/MBot/Cube/Configuration_adv.h +++ b/config/examples/MBot/Cube/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/MakerFarm/Pegasus 12/Configuration.h b/config/examples/MakerFarm/Pegasus 12/Configuration.h index aee3ef9b1d..423f090751 100644 --- a/config/examples/MakerFarm/Pegasus 12/Configuration.h +++ b/config/examples/MakerFarm/Pegasus 12/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 5 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h b/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h index f664230dc5..7c7c495520 100644 --- a/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h +++ b/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/MakerParts/Configuration.h b/config/examples/MakerParts/Configuration.h index 247bc47c47..a8ee192373 100644 --- a/config/examples/MakerParts/Configuration.h +++ b/config/examples/MakerParts/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/MakerParts/Configuration_adv.h b/config/examples/MakerParts/Configuration_adv.h index 0c5f56aa64..b161aa597a 100644 --- a/config/examples/MakerParts/Configuration_adv.h +++ b/config/examples/MakerParts/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/MakerTech3D/Proforge2sDual/Configuration.h b/config/examples/MakerTech3D/Proforge2sDual/Configuration.h index abe1a242ac..0d54a3e31c 100644 --- a/config/examples/MakerTech3D/Proforge2sDual/Configuration.h +++ b/config/examples/MakerTech3D/Proforge2sDual/Configuration.h @@ -569,6 +569,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/MakerTech3D/Proforge2sDual/Configuration_adv.h b/config/examples/MakerTech3D/Proforge2sDual/Configuration_adv.h index 8f5fa6c6d9..800b68ceb9 100644 --- a/config/examples/MakerTech3D/Proforge2sDual/Configuration_adv.h +++ b/config/examples/MakerTech3D/Proforge2sDual/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Malyan/M150/Configuration.h b/config/examples/Malyan/M150/Configuration.h index daefcc1a88..8b1d8d1c29 100644 --- a/config/examples/Malyan/M150/Configuration.h +++ b/config/examples/Malyan/M150/Configuration.h @@ -574,6 +574,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Malyan/M150/Configuration_adv.h b/config/examples/Malyan/M150/Configuration_adv.h index 01fd022e53..7a3b8ed98d 100644 --- a/config/examples/Malyan/M150/Configuration_adv.h +++ b/config/examples/Malyan/M150/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Malyan/M180/Configuration.h b/config/examples/Malyan/M180/Configuration.h index 2cd9ac1d7e..f47467ee33 100644 --- a/config/examples/Malyan/M180/Configuration.h +++ b/config/examples/Malyan/M180/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 30 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Malyan/M200/Configuration.h b/config/examples/Malyan/M200/Configuration.h index d80925a304..2fe420479a 100644 --- a/config/examples/Malyan/M200/Configuration.h +++ b/config/examples/Malyan/M200/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Malyan/M200/Configuration_adv.h b/config/examples/Malyan/M200/Configuration_adv.h index 6e91b65004..66541ae574 100644 --- a/config/examples/Malyan/M200/Configuration_adv.h +++ b/config/examples/Malyan/M200/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Micromake/C1/basic/Configuration.h b/config/examples/Micromake/C1/basic/Configuration.h index 777341fc63..e7f20368b4 100644 --- a/config/examples/Micromake/C1/basic/Configuration.h +++ b/config/examples/Micromake/C1/basic/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Micromake/C1/enhanced/Configuration.h b/config/examples/Micromake/C1/enhanced/Configuration.h index dbc62fa050..61dbc47388 100644 --- a/config/examples/Micromake/C1/enhanced/Configuration.h +++ b/config/examples/Micromake/C1/enhanced/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/config/examples/Micromake/C1/enhanced/Configuration_adv.h index d51ad86292..7cf2ff25e7 100644 --- a/config/examples/Micromake/C1/enhanced/Configuration_adv.h +++ b/config/examples/Micromake/C1/enhanced/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Mks/Robin/Configuration.h b/config/examples/Mks/Robin/Configuration.h index 4713a569c0..5a1b9a9a42 100644 --- a/config/examples/Mks/Robin/Configuration.h +++ b/config/examples/Mks/Robin/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Mks/Robin_Lite3/Configuration.h b/config/examples/Mks/Robin_Lite3/Configuration.h index e6aea336a0..7c8e90da89 100644 --- a/config/examples/Mks/Robin_Lite3/Configuration.h +++ b/config/examples/Mks/Robin_Lite3/Configuration.h @@ -574,6 +574,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Mks/Robin_Pro/Configuration.h b/config/examples/Mks/Robin_Pro/Configuration.h index 7aa0652ee0..4a91f85fd6 100644 --- a/config/examples/Mks/Robin_Pro/Configuration.h +++ b/config/examples/Mks/Robin_Pro/Configuration.h @@ -568,6 +568,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Mks/Sbase/Configuration.h b/config/examples/Mks/Sbase/Configuration.h index 60bee6379f..52b63cf753 100644 --- a/config/examples/Mks/Sbase/Configuration.h +++ b/config/examples/Mks/Sbase/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Mks/Sbase/Configuration_adv.h b/config/examples/Mks/Sbase/Configuration_adv.h index 84e87b5377..1277203c35 100644 --- a/config/examples/Mks/Sbase/Configuration_adv.h +++ b/config/examples/Mks/Sbase/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Modix/Big60/Configuration.h b/config/examples/Modix/Big60/Configuration.h index efa74f6e11..2e0d979cd7 100644 --- a/config/examples/Modix/Big60/Configuration.h +++ b/config/examples/Modix/Big60/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Modix/Big60/Configuration_adv.h b/config/examples/Modix/Big60/Configuration_adv.h index ea8e966072..4e29fd924a 100644 --- a/config/examples/Modix/Big60/Configuration_adv.h +++ b/config/examples/Modix/Big60/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Nextion/Configuration.h b/config/examples/Nextion/Configuration.h index 0c01f7a02b..d053818ccc 100644 --- a/config/examples/Nextion/Configuration.h +++ b/config/examples/Nextion/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Nextion/Configuration_adv.h b/config/examples/Nextion/Configuration_adv.h index 7faca99b90..7df0c89a02 100644 --- a/config/examples/Nextion/Configuration_adv.h +++ b/config/examples/Nextion/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Opulo/Lumen_REV3/Configuration.h b/config/examples/Opulo/Lumen_REV3/Configuration.h index e4d6d2e089..2ce26165ff 100644 --- a/config/examples/Opulo/Lumen_REV3/Configuration.h +++ b/config/examples/Opulo/Lumen_REV3/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Opulo/Lumen_REV3/Configuration_adv.h b/config/examples/Opulo/Lumen_REV3/Configuration_adv.h index b4ac7470cb..bca4049a1d 100644 --- a/config/examples/Opulo/Lumen_REV3/Configuration_adv.h +++ b/config/examples/Opulo/Lumen_REV3/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Opulo/Lumen_REV4/Configuration.h b/config/examples/Opulo/Lumen_REV4/Configuration.h index 942d84c418..65dc32a80f 100644 --- a/config/examples/Opulo/Lumen_REV4/Configuration.h +++ b/config/examples/Opulo/Lumen_REV4/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Opulo/Lumen_REV4/Configuration_adv.h b/config/examples/Opulo/Lumen_REV4/Configuration_adv.h index 553c1ae28c..d63198bea6 100644 --- a/config/examples/Opulo/Lumen_REV4/Configuration_adv.h +++ b/config/examples/Opulo/Lumen_REV4/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Ortur 4/Configuration.h b/config/examples/Ortur 4/Configuration.h index 227384dff7..853cf0ab03 100644 --- a/config/examples/Ortur 4/Configuration.h +++ b/config/examples/Ortur 4/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Ortur 4/Configuration_adv.h b/config/examples/Ortur 4/Configuration_adv.h index 9091ecb49e..e5ba8bb90d 100644 --- a/config/examples/Ortur 4/Configuration_adv.h +++ b/config/examples/Ortur 4/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Polargraph/Configuration.h b/config/examples/Polargraph/Configuration.h index 0b2d29cfe5..f13e02f564 100644 --- a/config/examples/Polargraph/Configuration.h +++ b/config/examples/Polargraph/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Polargraph/Configuration_adv.h b/config/examples/Polargraph/Configuration_adv.h index e6b9141643..728960b18e 100644 --- a/config/examples/Polargraph/Configuration_adv.h +++ b/config/examples/Polargraph/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Printrbot/PrintrboardG2/Configuration.h b/config/examples/Printrbot/PrintrboardG2/Configuration.h index c356116e4c..4ceeb16d03 100644 --- a/config/examples/Printrbot/PrintrboardG2/Configuration.h +++ b/config/examples/Printrbot/PrintrboardG2/Configuration.h @@ -567,6 +567,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Printrbot/Simple Metal RevD/Configuration.h b/config/examples/Printrbot/Simple Metal RevD/Configuration.h index d5f3cbc73d..6c9d49c927 100644 --- a/config/examples/Printrbot/Simple Metal RevD/Configuration.h +++ b/config/examples/Printrbot/Simple Metal RevD/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Prusa/MK3/Configuration.h b/config/examples/Prusa/MK3/Configuration.h index e58b9a14a3..a8d11d5bc4 100644 --- a/config/examples/Prusa/MK3/Configuration.h +++ b/config/examples/Prusa/MK3/Configuration.h @@ -589,6 +589,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Prusa/MK3/Configuration_adv.h b/config/examples/Prusa/MK3/Configuration_adv.h index cac0ec9d68..16a16ac18d 100644 --- a/config/examples/Prusa/MK3/Configuration_adv.h +++ b/config/examples/Prusa/MK3/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h index cd0c0df5d9..a148d60070 100644 --- a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h +++ b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h @@ -582,6 +582,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h index 79f3ff4b33..aa507a68e3 100644 --- a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h +++ b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Qidi/Qidi 1/Configuration.h b/config/examples/Qidi/Qidi 1/Configuration.h index 2018274dd9..c03cd15119 100644 --- a/config/examples/Qidi/Qidi 1/Configuration.h +++ b/config/examples/Qidi/Qidi 1/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 0 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Qidi/Qidi 1/Configuration_adv.h b/config/examples/Qidi/Qidi 1/Configuration_adv.h index db73584f09..a199986616 100644 --- a/config/examples/Qidi/Qidi 1/Configuration_adv.h +++ b/config/examples/Qidi/Qidi 1/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Raiscube/A8r/Configuration.h b/config/examples/Raiscube/A8r/Configuration.h index b813f62491..072213c824 100644 --- a/config/examples/Raiscube/A8r/Configuration.h +++ b/config/examples/Raiscube/A8r/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Raiscube/A8r/Configuration_adv.h b/config/examples/Raiscube/A8r/Configuration_adv.h index 4b491774c8..bf9e3a5d0e 100644 --- a/config/examples/Raiscube/A8r/Configuration_adv.h +++ b/config/examples/Raiscube/A8r/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/RapideLite/RL200/Configuration.h b/config/examples/RapideLite/RL200/Configuration.h index e22c8c8f03..eabac1df73 100644 --- a/config/examples/RapideLite/RL200/Configuration.h +++ b/config/examples/RapideLite/RL200/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/RapideLite/RL200/Configuration_adv.h b/config/examples/RapideLite/RL200/Configuration_adv.h index 0716259b58..fad07167e4 100644 --- a/config/examples/RapideLite/RL200/Configuration_adv.h +++ b/config/examples/RapideLite/RL200/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Renkforce/RF100/Configuration.h b/config/examples/Renkforce/RF100/Configuration.h index 5b9e1e0a12..821badce69 100644 --- a/config/examples/Renkforce/RF100/Configuration.h +++ b/config/examples/Renkforce/RF100/Configuration.h @@ -570,6 +570,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Renkforce/RF100/Configuration_adv.h b/config/examples/Renkforce/RF100/Configuration_adv.h index a2dfeaf4b6..6e54289160 100644 --- a/config/examples/Renkforce/RF100/Configuration_adv.h +++ b/config/examples/Renkforce/RF100/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Renkforce/RF100XL/Configuration.h b/config/examples/Renkforce/RF100XL/Configuration.h index 4aada0998a..2d2bb1764f 100644 --- a/config/examples/Renkforce/RF100XL/Configuration.h +++ b/config/examples/Renkforce/RF100XL/Configuration.h @@ -570,6 +570,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Renkforce/RF100XL/Configuration_adv.h b/config/examples/Renkforce/RF100XL/Configuration_adv.h index a2dfeaf4b6..6e54289160 100644 --- a/config/examples/Renkforce/RF100XL/Configuration_adv.h +++ b/config/examples/Renkforce/RF100XL/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Renkforce/RF100v2/Configuration.h b/config/examples/Renkforce/RF100v2/Configuration.h index c3abcde35c..045736e4e6 100644 --- a/config/examples/Renkforce/RF100v2/Configuration.h +++ b/config/examples/Renkforce/RF100v2/Configuration.h @@ -570,6 +570,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Renkforce/RF100v2/Configuration_adv.h b/config/examples/Renkforce/RF100v2/Configuration_adv.h index a2dfeaf4b6..6e54289160 100644 --- a/config/examples/Renkforce/RF100v2/Configuration_adv.h +++ b/config/examples/Renkforce/RF100v2/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/RepRapPro/Huxley/Configuration.h b/config/examples/RepRapPro/Huxley/Configuration.h index 0a6e2acdec..21cf80d498 100644 --- a/config/examples/RepRapPro/Huxley/Configuration.h +++ b/config/examples/RepRapPro/Huxley/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/RepRapWorld/Megatronics/Configuration.h b/config/examples/RepRapWorld/Megatronics/Configuration.h index efe4c4d888..fbbbeb9f9a 100644 --- a/config/examples/RepRapWorld/Megatronics/Configuration.h +++ b/config/examples/RepRapWorld/Megatronics/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/RigidBot/Configuration.h b/config/examples/RigidBot/Configuration.h index 5421603c1b..903637a2fd 100644 --- a/config/examples/RigidBot/Configuration.h +++ b/config/examples/RigidBot/Configuration.h @@ -568,6 +568,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/RigidBot/Configuration_adv.h b/config/examples/RigidBot/Configuration_adv.h index 71bca14dea..ed0a679186 100644 --- a/config/examples/RigidBot/Configuration_adv.h +++ b/config/examples/RigidBot/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Robo3D/R1+/Configuration.h b/config/examples/Robo3D/R1+/Configuration.h index 3c40eddf50..408d8afca6 100644 --- a/config/examples/Robo3D/R1+/Configuration.h +++ b/config/examples/Robo3D/R1+/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/SCARA/MP_SCARA/Configuration.h b/config/examples/SCARA/MP_SCARA/Configuration.h index 0262cd3536..448670a8ca 100644 --- a/config/examples/SCARA/MP_SCARA/Configuration.h +++ b/config/examples/SCARA/MP_SCARA/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 3 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/SCARA/MP_SCARA/Configuration_adv.h b/config/examples/SCARA/MP_SCARA/Configuration_adv.h index 66ce6a1076..e520d69bfd 100644 --- a/config/examples/SCARA/MP_SCARA/Configuration_adv.h +++ b/config/examples/SCARA/MP_SCARA/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/SCARA/Morgan/Configuration.h b/config/examples/SCARA/Morgan/Configuration.h index 5e5f139ee5..e39d2f4667 100644 --- a/config/examples/SCARA/Morgan/Configuration.h +++ b/config/examples/SCARA/Morgan/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 3 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/SCARA/Morgan/Configuration_adv.h b/config/examples/SCARA/Morgan/Configuration_adv.h index 08a988b55a..84a5410ad3 100644 --- a/config/examples/SCARA/Morgan/Configuration_adv.h +++ b/config/examples/SCARA/Morgan/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration.h b/config/examples/STM32/Black_STM32F407VET6/Configuration.h index e560d518e5..43105e2065 100644 --- a/config/examples/STM32/Black_STM32F407VET6/Configuration.h +++ b/config/examples/STM32/Black_STM32F407VET6/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h index 954c5f8fcc..7ec2fc3f33 100644 --- a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h +++ b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/STM32/STM32F103RE/Configuration.h b/config/examples/STM32/STM32F103RE/Configuration.h index bbaeee22ea..63ee06061f 100644 --- a/config/examples/STM32/STM32F103RE/Configuration.h +++ b/config/examples/STM32/STM32F103RE/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Sanguinololu/Configuration.h b/config/examples/Sanguinololu/Configuration.h index 54b8b249e1..e2b1d16fdb 100644 --- a/config/examples/Sanguinololu/Configuration.h +++ b/config/examples/Sanguinololu/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Sanguinololu/Configuration_adv.h b/config/examples/Sanguinololu/Configuration_adv.h index 61228b8e42..4a5c5941d9 100644 --- a/config/examples/Sanguinololu/Configuration_adv.h +++ b/config/examples/Sanguinololu/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Simulator/Configuration.h b/config/examples/Simulator/Configuration.h index 82978b8a8b..620152695c 100644 --- a/config/examples/Simulator/Configuration.h +++ b/config/examples/Simulator/Configuration.h @@ -581,6 +581,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Simulator/Configuration_adv.h b/config/examples/Simulator/Configuration_adv.h index 7b39df5dc7..28aceb1674 100644 --- a/config/examples/Simulator/Configuration_adv.h +++ b/config/examples/Simulator/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration.h b/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration.h index 4eca5eb737..c5a7dcecb0 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration.h @@ -572,6 +572,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration_adv.h b/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration_adv.h index 84cb4427da..76ce775855 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration.h index b4e323d97e..8c53a1bbbb 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -569,6 +569,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 289482093d..41662fcae7 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration.h b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration.h index 298ba6fc5f..3ee869f125 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration.h @@ -570,6 +570,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h index 775cf89a6d..02b4c07f71 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Sovol/SV-01/CrealityV22/Configuration.h b/config/examples/Sovol/SV-01/CrealityV22/Configuration.h index acab0441dc..80bcca75c9 100644 --- a/config/examples/Sovol/SV-01/CrealityV22/Configuration.h +++ b/config/examples/Sovol/SV-01/CrealityV22/Configuration.h @@ -569,6 +569,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h b/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h index c159fd5cf3..19d516c4ee 100644 --- a/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Sovol/SV-01/CrealityV221/Configuration.h b/config/examples/Sovol/SV-01/CrealityV221/Configuration.h index 15450f1139..d021d110b3 100644 --- a/config/examples/Sovol/SV-01/CrealityV221/Configuration.h +++ b/config/examples/Sovol/SV-01/CrealityV221/Configuration.h @@ -569,6 +569,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h b/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h index b74d10bcbb..c1547b55fd 100644 --- a/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Sovol/SV-02/Configuration.h b/config/examples/Sovol/SV-02/Configuration.h index c3caff78e9..0a4776292f 100644 --- a/config/examples/Sovol/SV-02/Configuration.h +++ b/config/examples/Sovol/SV-02/Configuration.h @@ -569,6 +569,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Sovol/SV-02/Configuration_adv.h b/config/examples/Sovol/SV-02/Configuration_adv.h index 7c798435cf..eafacb2fad 100644 --- a/config/examples/Sovol/SV-02/Configuration_adv.h +++ b/config/examples/Sovol/SV-02/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Sovol/SV-03/Configuration.h b/config/examples/Sovol/SV-03/Configuration.h index 1027ed045c..9d141f6cb4 100644 --- a/config/examples/Sovol/SV-03/Configuration.h +++ b/config/examples/Sovol/SV-03/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Sovol/SV-03/Configuration_adv.h b/config/examples/Sovol/SV-03/Configuration_adv.h index 7d3ef515e3..c709903f4d 100644 --- a/config/examples/Sovol/SV-03/Configuration_adv.h +++ b/config/examples/Sovol/SV-03/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Sunlu/S8/Configuration.h b/config/examples/Sunlu/S8/Configuration.h index 09a2cad5c1..0afab43ca1 100644 --- a/config/examples/Sunlu/S8/Configuration.h +++ b/config/examples/Sunlu/S8/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 5 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Sunlu/S8/Configuration_adv.h b/config/examples/Sunlu/S8/Configuration_adv.h index fc76e6ae86..698d807ae4 100644 --- a/config/examples/Sunlu/S8/Configuration_adv.h +++ b/config/examples/Sunlu/S8/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/TPARA/AXEL_TPARA/Configuration.h b/config/examples/TPARA/AXEL_TPARA/Configuration.h index ad4952bc78..7f6025e0d2 100644 --- a/config/examples/TPARA/AXEL_TPARA/Configuration.h +++ b/config/examples/TPARA/AXEL_TPARA/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 3 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h b/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h index 65d7508552..bc2d0c35bc 100644 --- a/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h +++ b/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Tevo/Michelangelo/Configuration.h b/config/examples/Tevo/Michelangelo/Configuration.h index 6720795b54..e02743291c 100644 --- a/config/examples/Tevo/Michelangelo/Configuration.h +++ b/config/examples/Tevo/Michelangelo/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 5 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Tevo/Michelangelo/Configuration_adv.h b/config/examples/Tevo/Michelangelo/Configuration_adv.h index 3e1aaf0f30..2b297534f9 100644 --- a/config/examples/Tevo/Michelangelo/Configuration_adv.h +++ b/config/examples/Tevo/Michelangelo/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Tevo/Nereus/Configuration.h b/config/examples/Tevo/Nereus/Configuration.h index 9117207ffe..b6abd48e6a 100644 --- a/config/examples/Tevo/Nereus/Configuration.h +++ b/config/examples/Tevo/Nereus/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Tevo/Nereus/Configuration_adv.h b/config/examples/Tevo/Nereus/Configuration_adv.h index 43182ece78..132665e840 100644 --- a/config/examples/Tevo/Nereus/Configuration_adv.h +++ b/config/examples/Tevo/Nereus/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Tevo/Tarantula Pro/Configuration.h b/config/examples/Tevo/Tarantula Pro/Configuration.h index 632c4d17df..394b7d9a05 100644 --- a/config/examples/Tevo/Tarantula Pro/Configuration.h +++ b/config/examples/Tevo/Tarantula Pro/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Tevo/Tarantula Pro/Configuration_adv.h b/config/examples/Tevo/Tarantula Pro/Configuration_adv.h index a313651ee6..6037890c6f 100644 --- a/config/examples/Tevo/Tarantula Pro/Configuration_adv.h +++ b/config/examples/Tevo/Tarantula Pro/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h index 01461aa619..05738c06c2 100644 --- a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h +++ b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 5 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h index 4ab7881e8b..888d8a081a 100644 --- a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h +++ b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h index 94cc965cc5..f8590367c2 100644 --- a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h +++ b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 5 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h index 4ab7881e8b..888d8a081a 100644 --- a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h +++ b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration.h b/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration.h index aa440d8277..7f0d03a704 100644 --- a/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration.h +++ b/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration_adv.h b/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration_adv.h index 6a3f2d5d08..c3a3e0d72c 100644 --- a/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration_adv.h +++ b/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/TinyBoy2/Configuration.h b/config/examples/TinyBoy2/Configuration.h index 63e03b35a4..1cd802758a 100644 --- a/config/examples/TinyBoy2/Configuration.h +++ b/config/examples/TinyBoy2/Configuration.h @@ -593,6 +593,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/TinyBoy2/Configuration_adv.h b/config/examples/TinyBoy2/Configuration_adv.h index 0680751129..fd231114fb 100644 --- a/config/examples/TinyBoy2/Configuration_adv.h +++ b/config/examples/TinyBoy2/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Tronxy/X1/Configuration.h b/config/examples/Tronxy/X1/Configuration.h index 94c3d0a200..0a6d1bdba3 100644 --- a/config/examples/Tronxy/X1/Configuration.h +++ b/config/examples/Tronxy/X1/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Tronxy/X3A/Configuration.h b/config/examples/Tronxy/X3A/Configuration.h index 906984de20..5da12d126f 100644 --- a/config/examples/Tronxy/X3A/Configuration.h +++ b/config/examples/Tronxy/X3A/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Tronxy/X3A/Configuration_adv.h b/config/examples/Tronxy/X3A/Configuration_adv.h index d613b85b10..5792709440 100644 --- a/config/examples/Tronxy/X3A/Configuration_adv.h +++ b/config/examples/Tronxy/X3A/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration.h b/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration.h index e473630a07..6b07151c26 100644 --- a/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration.h +++ b/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration_adv.h b/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration_adv.h index b7cc0b257c..a5b103db6c 100644 --- a/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration_adv.h +++ b/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration.h b/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration.h index df6ee73d4a..885878f1dc 100644 --- a/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration.h +++ b/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration.h @@ -570,6 +570,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration_adv.h b/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration_adv.h index 9b9b33b702..861b81045c 100644 --- a/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration_adv.h +++ b/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Tronxy/X5S/Configuration.h b/config/examples/Tronxy/X5S/Configuration.h index 2e54231c41..860b9ef8f9 100644 --- a/config/examples/Tronxy/X5S/Configuration.h +++ b/config/examples/Tronxy/X5S/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Tronxy/X5SA-2E/Configuration.h b/config/examples/Tronxy/X5SA-2E/Configuration.h index f0c5ab325a..f15f0762d1 100644 --- a/config/examples/Tronxy/X5SA-2E/Configuration.h +++ b/config/examples/Tronxy/X5SA-2E/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Tronxy/X5SA-2E/Configuration_adv.h b/config/examples/Tronxy/X5SA-2E/Configuration_adv.h index 4af88fe805..db437fc651 100644 --- a/config/examples/Tronxy/X5SA-2E/Configuration_adv.h +++ b/config/examples/Tronxy/X5SA-2E/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Tronxy/X5SA/Configuration.h b/config/examples/Tronxy/X5SA/Configuration.h index aa82ec30df..1d1b3af0a4 100644 --- a/config/examples/Tronxy/X5SA/Configuration.h +++ b/config/examples/Tronxy/X5SA/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Tronxy/X5SA/Configuration_adv.h b/config/examples/Tronxy/X5SA/Configuration_adv.h index 2d40d44bc0..8450e5338f 100644 --- a/config/examples/Tronxy/X5SA/Configuration_adv.h +++ b/config/examples/Tronxy/X5SA/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Tronxy/XY100/Configuration.h b/config/examples/Tronxy/XY100/Configuration.h index 37ad8fa54d..a1c9232fd7 100644 --- a/config/examples/Tronxy/XY100/Configuration.h +++ b/config/examples/Tronxy/XY100/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Two Trees/BlueR Plus/Configuration.h b/config/examples/Two Trees/BlueR Plus/Configuration.h index bc295c74d1..302fa69cc9 100644 --- a/config/examples/Two Trees/BlueR Plus/Configuration.h +++ b/config/examples/Two Trees/BlueR Plus/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Two Trees/BlueR Plus/Configuration_adv.h b/config/examples/Two Trees/BlueR Plus/Configuration_adv.h index ae14d92b7b..347f504dff 100644 --- a/config/examples/Two Trees/BlueR Plus/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR Plus/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Two Trees/BlueR/BlueR V1/Configuration.h b/config/examples/Two Trees/BlueR/BlueR V1/Configuration.h index 55c739b7ec..201405d9d4 100644 --- a/config/examples/Two Trees/BlueR/BlueR V1/Configuration.h +++ b/config/examples/Two Trees/BlueR/BlueR V1/Configuration.h @@ -579,6 +579,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h b/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h index 3c99f61a73..964dcd55ec 100644 --- a/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Two Trees/BlueR/BlueR V2/Configuration.h b/config/examples/Two Trees/BlueR/BlueR V2/Configuration.h index 0c918722ef..526854ee79 100644 --- a/config/examples/Two Trees/BlueR/BlueR V2/Configuration.h +++ b/config/examples/Two Trees/BlueR/BlueR V2/Configuration.h @@ -580,6 +580,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h b/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h index 3c99f61a73..964dcd55ec 100644 --- a/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Two Trees/BlueR/BlueR V3/Configuration.h b/config/examples/Two Trees/BlueR/BlueR V3/Configuration.h index c3bf73b934..48bb04750f 100644 --- a/config/examples/Two Trees/BlueR/BlueR V3/Configuration.h +++ b/config/examples/Two Trees/BlueR/BlueR V3/Configuration.h @@ -587,6 +587,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h b/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h index 66453cc11e..24a8683455 100644 --- a/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration.h b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration.h index 80dce01e3d..209bb181a3 100644 --- a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration.h +++ b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration.h @@ -572,6 +572,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration_adv.h b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration_adv.h index 0623bd651a..c4cfb10c6a 100644 --- a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration_adv.h +++ b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration.h b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration.h index 867de2a024..803c552661 100644 --- a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration.h +++ b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration.h @@ -572,6 +572,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h index 7915b1a83a..67c5eff130 100644 --- a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h +++ b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Two Trees/Sapphire Pro/Configuration.h b/config/examples/Two Trees/Sapphire Pro/Configuration.h index a500488675..1d5adf5c9d 100644 --- a/config/examples/Two Trees/Sapphire Pro/Configuration.h +++ b/config/examples/Two Trees/Sapphire Pro/Configuration.h @@ -580,6 +580,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h b/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h index 120a061129..315da2ab69 100644 --- a/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h +++ b/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/UltiMachine/Archim1/Configuration.h b/config/examples/UltiMachine/Archim1/Configuration.h index 6981e9c2b7..6c1e2fc43a 100644 --- a/config/examples/UltiMachine/Archim1/Configuration.h +++ b/config/examples/UltiMachine/Archim1/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/UltiMachine/Archim1/Configuration_adv.h b/config/examples/UltiMachine/Archim1/Configuration_adv.h index a358e0d9dd..ec91f1e976 100644 --- a/config/examples/UltiMachine/Archim1/Configuration_adv.h +++ b/config/examples/UltiMachine/Archim1/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/UltiMachine/Archim2/Configuration.h b/config/examples/UltiMachine/Archim2/Configuration.h index 86fe98122f..2a95c4940f 100644 --- a/config/examples/UltiMachine/Archim2/Configuration.h +++ b/config/examples/UltiMachine/Archim2/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/UltiMachine/Archim2/Configuration_adv.h b/config/examples/UltiMachine/Archim2/Configuration_adv.h index d54b471d97..294f478101 100644 --- a/config/examples/UltiMachine/Archim2/Configuration_adv.h +++ b/config/examples/UltiMachine/Archim2/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Ultimaker/Ultimaker 2+/Configuration.h b/config/examples/Ultimaker/Ultimaker 2+/Configuration.h index 32750bea57..385d41694c 100644 --- a/config/examples/Ultimaker/Ultimaker 2+/Configuration.h +++ b/config/examples/Ultimaker/Ultimaker 2+/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 3 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Ultimaker/Ultimaker 2+/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker 2+/Configuration_adv.h index a6021b9753..f672635908 100644 --- a/config/examples/Ultimaker/Ultimaker 2+/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker 2+/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Ultimaker/Ultimaker 2/Configuration.h b/config/examples/Ultimaker/Ultimaker 2/Configuration.h index f5ccc6ca29..f327c9cca6 100644 --- a/config/examples/Ultimaker/Ultimaker 2/Configuration.h +++ b/config/examples/Ultimaker/Ultimaker 2/Configuration.h @@ -569,6 +569,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 3 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Ultimaker/Ultimaker 2/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker 2/Configuration_adv.h index 1bd4757b5c..0ade964924 100644 --- a/config/examples/Ultimaker/Ultimaker 2/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker 2/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration.h b/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration.h index f1d42ca8df..add85b6f46 100644 --- a/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration.h +++ b/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h index c3b431528e..3fe2a5dbac 100644 --- a/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration.h b/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration.h index 536eee431a..1efb99739a 100644 --- a/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration.h +++ b/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration_adv.h index 1930d580b2..2d93c54086 100644 --- a/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration.h b/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration.h index 2562fec47b..7123c3a49c 100644 --- a/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration.h +++ b/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 1 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration_adv.h index 80981f4204..e20eb3a2b3 100644 --- a/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/VORONDesign/Configuration.h b/config/examples/VORONDesign/Configuration.h index f275b73128..822d584fe8 100644 --- a/config/examples/VORONDesign/Configuration.h +++ b/config/examples/VORONDesign/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/VORONDesign/Configuration_adv.h b/config/examples/VORONDesign/Configuration_adv.h index e634ceea1c..89cea64ccd 100644 --- a/config/examples/VORONDesign/Configuration_adv.h +++ b/config/examples/VORONDesign/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Velleman/K8200 Upgraded/Configuration.h b/config/examples/Velleman/K8200 Upgraded/Configuration.h index 4118bc115f..289ce52dfd 100644 --- a/config/examples/Velleman/K8200 Upgraded/Configuration.h +++ b/config/examples/Velleman/K8200 Upgraded/Configuration.h @@ -594,6 +594,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Velleman/K8200 Upgraded/Configuration_adv.h b/config/examples/Velleman/K8200 Upgraded/Configuration_adv.h index aa95731128..71b145a24a 100644 --- a/config/examples/Velleman/K8200 Upgraded/Configuration_adv.h +++ b/config/examples/Velleman/K8200 Upgraded/Configuration_adv.h @@ -179,24 +179,23 @@ #endif /** - * Configuration options for MAX Thermocouples (-2, -3, -5). - * FORCE_HW_SPI: Ignore SCK/MOSI/MISO pins and just use the CS pin & default SPI bus. - * MAX31865_WIRES: Set the number of wires for the probe connected to a MAX31865 board, 2-4. Default: 2 - * MAX31865_50HZ: Enable 50Hz filter instead of the default 60Hz. - * MAX31865_USE_READ_ERROR_DETECTION: Detects random read errors from value spikes (a 20°C difference in less than 1sec) - * MAX31865_USE_AUTO_MODE: Faster and more frequent reads than 1-shot, but bias voltage always on, slightly affecting RTD temperature. - * MAX31865_MIN_SAMPLING_TIME_MSEC: in 1-shot mode, the minimum time between subsequent reads. This reduces the effect of bias voltage by leaving the sensor unpowered for longer intervals. - * MAX31865_WIRE_OHMS: In 2-wire configurations, manually set the wire resistance for more accurate readings + * Thermocouple Options — for MAX6675 (-2), MAX31855 (-3), and MAX31865 (-5). */ -//#define TEMP_SENSOR_FORCE_HW_SPI -//#define MAX31865_SENSOR_WIRES_0 2 +//#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. +//#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 -//#define MAX31865_50HZ_FILTER -//#define MAX31865_USE_READ_ERROR_DETECTION -//#define MAX31865_USE_AUTO_MODE -//#define MAX31865_MIN_SAMPLING_TIME_MSEC 100 -//#define MAX31865_WIRE_OHMS_0 0.0f -//#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_SENSOR_WIRES_2 2 + +//#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. +//#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. + +//#define MAX31865_USE_AUTO_MODE // Read faster and more often than 1-shot; bias voltage always on; slight effect on RTD temperature. +//#define MAX31865_MIN_SAMPLING_TIME_MSEC 100 // (ms) 1-shot: minimum read interval. Reduces bias voltage effects by leaving sensor unpowered for longer intervals. +//#define MAX31865_IGNORE_INITIAL_FAULTY_READS 10 // Ignore some read faults (keeping the temperature reading) to work around a possible issue (#23439). + +//#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. +//#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Velleman/K8200/Configuration.h b/config/examples/Velleman/K8200/Configuration.h index d57d9a1e1c..3f9efe91e5 100644 --- a/config/examples/Velleman/K8200/Configuration.h +++ b/config/examples/Velleman/K8200/Configuration.h @@ -597,6 +597,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Velleman/K8200/Configuration_adv.h b/config/examples/Velleman/K8200/Configuration_adv.h index 1fb8251953..bf2af7f16c 100644 --- a/config/examples/Velleman/K8200/Configuration_adv.h +++ b/config/examples/Velleman/K8200/Configuration_adv.h @@ -184,6 +184,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -194,6 +195,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Velleman/K8400/Dual-head/Configuration.h b/config/examples/Velleman/K8400/Dual-head/Configuration.h index 4aa91ce2a6..2be2c3bb56 100644 --- a/config/examples/Velleman/K8400/Dual-head/Configuration.h +++ b/config/examples/Velleman/K8400/Dual-head/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 5 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h b/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h index 84073ba298..03b667251d 100644 --- a/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h +++ b/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Velleman/K8400/Single-head/Configuration.h b/config/examples/Velleman/K8400/Single-head/Configuration.h index 3aef7407f6..16ab51f24c 100644 --- a/config/examples/Velleman/K8400/Single-head/Configuration.h +++ b/config/examples/Velleman/K8400/Single-head/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 5 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Velleman/K8400/Single-head/Configuration_adv.h b/config/examples/Velleman/K8400/Single-head/Configuration_adv.h index 84073ba298..03b667251d 100644 --- a/config/examples/Velleman/K8400/Single-head/Configuration_adv.h +++ b/config/examples/Velleman/K8400/Single-head/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/WASP/PowerWASP/Configuration.h b/config/examples/WASP/PowerWASP/Configuration.h index e52fef38bc..86ded32952 100644 --- a/config/examples/WASP/PowerWASP/Configuration.h +++ b/config/examples/WASP/PowerWASP/Configuration.h @@ -579,6 +579,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 5 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/WASP/PowerWASP/Configuration_adv.h b/config/examples/WASP/PowerWASP/Configuration_adv.h index c7c57ce67b..ad111338eb 100644 --- a/config/examples/WASP/PowerWASP/Configuration_adv.h +++ b/config/examples/WASP/PowerWASP/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Wanhao/Duplicator 4S/Configuration.h b/config/examples/Wanhao/Duplicator 4S/Configuration.h index e202f33c7e..ed7f1e9a61 100644 --- a/config/examples/Wanhao/Duplicator 4S/Configuration.h +++ b/config/examples/Wanhao/Duplicator 4S/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 0 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h b/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h index e41bc505ce..9960ac0dfa 100644 --- a/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Wanhao/Duplicator 6/Configuration.h b/config/examples/Wanhao/Duplicator 6/Configuration.h index 339119a31e..3cd7530357 100644 --- a/config/examples/Wanhao/Duplicator 6/Configuration.h +++ b/config/examples/Wanhao/Duplicator 6/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h index 6fa44de7ea..78150c0f10 100644 --- a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h b/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h index 40adfb7a0d..8f9463d778 100644 --- a/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h +++ b/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h index 5fa0925f13..8837e88734 100644 --- a/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h index a8db17a25a..ae228da368 100644 --- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h +++ b/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h index bee6194873..6d3b3e3790 100644 --- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Wanhao/Duplicator i3 Plus/Configuration.h b/config/examples/Wanhao/Duplicator i3 Plus/Configuration.h index f70c97706a..866f03db8e 100644 --- a/config/examples/Wanhao/Duplicator i3 Plus/Configuration.h +++ b/config/examples/Wanhao/Duplicator i3 Plus/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Weedo/Tina2/V2/Configuration.h b/config/examples/Weedo/Tina2/V2/Configuration.h index e816118433..028576d229 100644 --- a/config/examples/Weedo/Tina2/V2/Configuration.h +++ b/config/examples/Weedo/Tina2/V2/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Weedo/Tina2/V2/Configuration_adv.h b/config/examples/Weedo/Tina2/V2/Configuration_adv.h index 0613f6fe02..fe52814574 100644 --- a/config/examples/Weedo/Tina2/V2/Configuration_adv.h +++ b/config/examples/Weedo/Tina2/V2/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Weedo/Tina2/V3/Configuration.h b/config/examples/Weedo/Tina2/V3/Configuration.h index de4073ebad..89b1ddc29a 100644 --- a/config/examples/Weedo/Tina2/V3/Configuration.h +++ b/config/examples/Weedo/Tina2/V3/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Weedo/Tina2/V3/Configuration_adv.h b/config/examples/Weedo/Tina2/V3/Configuration_adv.h index 0613f6fe02..fe52814574 100644 --- a/config/examples/Weedo/Tina2/V3/Configuration_adv.h +++ b/config/examples/Weedo/Tina2/V3/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Weistek/wt150/Configuration.h b/config/examples/Weistek/wt150/Configuration.h index a3760105a0..93b8754501 100644 --- a/config/examples/Weistek/wt150/Configuration.h +++ b/config/examples/Weistek/wt150/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Weistek/wt150/Configuration_adv.h b/config/examples/Weistek/wt150/Configuration_adv.h index dc421168de..1dd50a2eee 100644 --- a/config/examples/Weistek/wt150/Configuration_adv.h +++ b/config/examples/Weistek/wt150/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Zonestar/P802M/Configuration.h b/config/examples/Zonestar/P802M/Configuration.h index ae1ad9bba0..7bcc2fca7b 100644 --- a/config/examples/Zonestar/P802M/Configuration.h +++ b/config/examples/Zonestar/P802M/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Zonestar/P802M/Configuration_adv.h b/config/examples/Zonestar/P802M/Configuration_adv.h index 1a07980ad2..bfae27766c 100644 --- a/config/examples/Zonestar/P802M/Configuration_adv.h +++ b/config/examples/Zonestar/P802M/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h index e240082fb8..6fb286d490 100644 --- a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h +++ b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h @@ -568,6 +568,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h index 91699667df..a914ade2e1 100644 --- a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h +++ b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h index b9a862257f..f2550c2131 100755 --- a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h +++ b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h @@ -568,6 +568,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h index 4df73a07ed..faf12d45bc 100755 --- a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h +++ b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h index 07adccb1c3..248665424d 100644 --- a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h +++ b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h @@ -585,6 +585,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h index 4950b385a5..243530ae6d 100644 --- a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/delta/Anycubic/Kossel/Configuration.h b/config/examples/delta/Anycubic/Kossel/Configuration.h index 24f69eab1f..cbf30b345c 100644 --- a/config/examples/delta/Anycubic/Kossel/Configuration.h +++ b/config/examples/delta/Anycubic/Kossel/Configuration.h @@ -585,6 +585,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h index 3f58a64ab2..9fecb5bf80 100644 --- a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/delta/Anycubic/Predator/Configuration.h b/config/examples/delta/Anycubic/Predator/Configuration.h index 57db2fad85..fd8c1f9e79 100644 --- a/config/examples/delta/Anycubic/Predator/Configuration.h +++ b/config/examples/delta/Anycubic/Predator/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/delta/Anycubic/Predator/Configuration_adv.h b/config/examples/delta/Anycubic/Predator/Configuration_adv.h index d4baca176b..d352d6a0e7 100644 --- a/config/examples/delta/Anycubic/Predator/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Predator/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/delta/Dreammaker/Overlord/Configuration.h b/config/examples/delta/Dreammaker/Overlord/Configuration.h index dc8fd9b548..8d15c84bee 100644 --- a/config/examples/delta/Dreammaker/Overlord/Configuration.h +++ b/config/examples/delta/Dreammaker/Overlord/Configuration.h @@ -565,6 +565,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h index 8cbff5ed01..c44b87f07b 100644 --- a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h +++ b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h index f5e677dc7d..edcc244181 100644 --- a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h +++ b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h @@ -572,6 +572,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h index 8cbff5ed01..c44b87f07b 100644 --- a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h +++ b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h index 9516ef90d2..7b045d179c 100644 --- a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h +++ b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h index b39c19bcdb..bb69663556 100644 --- a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h +++ b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h b/config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h index 08ad0aaf5c..9455a19766 100644 --- a/config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h +++ b/config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/delta/FLSUN/QQ-S/Configuration.h b/config/examples/delta/FLSUN/QQ-S/Configuration.h index 99553a4c72..c97284e032 100644 --- a/config/examples/delta/FLSUN/QQ-S/Configuration.h +++ b/config/examples/delta/FLSUN/QQ-S/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h b/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h index 7fd85d448b..e4697e907e 100644 --- a/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h +++ b/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/delta/FLSUN/QQS-Pro/Configuration.h b/config/examples/delta/FLSUN/QQS-Pro/Configuration.h index 48c3722dc3..1dc873fcbc 100644 --- a/config/examples/delta/FLSUN/QQS-Pro/Configuration.h +++ b/config/examples/delta/FLSUN/QQS-Pro/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h b/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h index 9a3b9344ac..3dd9b9dcad 100644 --- a/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h +++ b/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration.h index d3251391b7..72d7c172ed 100644 --- a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h +++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h index 59517ef3fe..78cd1c5d5d 100644 --- a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h +++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/delta/FLSUN/kossel/Configuration.h b/config/examples/delta/FLSUN/kossel/Configuration.h index e57b7ee4bc..d4a26612d1 100644 --- a/config/examples/delta/FLSUN/kossel/Configuration.h +++ b/config/examples/delta/FLSUN/kossel/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/delta/FLSUN/kossel/Configuration_adv.h b/config/examples/delta/FLSUN/kossel/Configuration_adv.h index 59517ef3fe..78cd1c5d5d 100644 --- a/config/examples/delta/FLSUN/kossel/Configuration_adv.h +++ b/config/examples/delta/FLSUN/kossel/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration.h b/config/examples/delta/FLSUN/kossel_mini/Configuration.h index 92d388946c..6502ecee76 100644 --- a/config/examples/delta/FLSUN/kossel_mini/Configuration.h +++ b/config/examples/delta/FLSUN/kossel_mini/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h index c21a0bafca..266d2108f9 100644 --- a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h +++ b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/delta/Geeetech/G2/Configuration.h b/config/examples/delta/Geeetech/G2/Configuration.h index a152469d1c..d5088a2ab8 100644 --- a/config/examples/delta/Geeetech/G2/Configuration.h +++ b/config/examples/delta/Geeetech/G2/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/delta/Geeetech/G2/Configuration_adv.h b/config/examples/delta/Geeetech/G2/Configuration_adv.h index a657c863a0..06b7436e41 100644 --- a/config/examples/delta/Geeetech/G2/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/delta/Geeetech/G2Pro/Configuration.h b/config/examples/delta/Geeetech/G2Pro/Configuration.h index 1f3c620efe..59d0c51b41 100644 --- a/config/examples/delta/Geeetech/G2Pro/Configuration.h +++ b/config/examples/delta/Geeetech/G2Pro/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h b/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h index a657c863a0..06b7436e41 100644 --- a/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/delta/Geeetech/G2S/Configuration.h b/config/examples/delta/Geeetech/G2S/Configuration.h index 54c4359890..f9aa44e844 100644 --- a/config/examples/delta/Geeetech/G2S/Configuration.h +++ b/config/examples/delta/Geeetech/G2S/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/delta/Geeetech/G2S/Configuration_adv.h b/config/examples/delta/Geeetech/G2S/Configuration_adv.h index a657c863a0..06b7436e41 100644 --- a/config/examples/delta/Geeetech/G2S/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2S/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/delta/Geeetech/G2SPro/Configuration.h b/config/examples/delta/Geeetech/G2SPro/Configuration.h index 790fe29cdc..43a349fd41 100644 --- a/config/examples/delta/Geeetech/G2SPro/Configuration.h +++ b/config/examples/delta/Geeetech/G2SPro/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h b/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h index a657c863a0..06b7436e41 100644 --- a/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration.h b/config/examples/delta/Geeetech/Rostock 301/Configuration.h index 74d9b33f93..7bf3fd21b4 100644 --- a/config/examples/delta/Geeetech/Rostock 301/Configuration.h +++ b/config/examples/delta/Geeetech/Rostock 301/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h index f28e017f55..ea389fae22 100644 --- a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h +++ b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/delta/Hatchbox_Alpha/Configuration.h b/config/examples/delta/Hatchbox_Alpha/Configuration.h index d0290741af..faa0cee251 100644 --- a/config/examples/delta/Hatchbox_Alpha/Configuration.h +++ b/config/examples/delta/Hatchbox_Alpha/Configuration.h @@ -571,6 +571,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h b/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h index ae70f73f3b..6ea0691cc1 100644 --- a/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h +++ b/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/delta/MKS/SBASE/Configuration.h b/config/examples/delta/MKS/SBASE/Configuration.h index 9341833e19..11794b95d0 100644 --- a/config/examples/delta/MKS/SBASE/Configuration.h +++ b/config/examples/delta/MKS/SBASE/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/delta/MKS/SBASE/Configuration_adv.h b/config/examples/delta/MKS/SBASE/Configuration_adv.h index 675f5ce94a..e7e3842b59 100644 --- a/config/examples/delta/MKS/SBASE/Configuration_adv.h +++ b/config/examples/delta/MKS/SBASE/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/delta/Malyan M300/Configuration.h b/config/examples/delta/Malyan M300/Configuration.h index da0f875689..4c528a12ae 100644 --- a/config/examples/delta/Malyan M300/Configuration.h +++ b/config/examples/delta/Malyan M300/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/delta/Malyan M300/Configuration_adv.h b/config/examples/delta/Malyan M300/Configuration_adv.h index bf7bcf51e2..bc69a70e8c 100644 --- a/config/examples/delta/Malyan M300/Configuration_adv.h +++ b/config/examples/delta/Malyan M300/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/delta/Tevo Little Monster/Configuration.h b/config/examples/delta/Tevo Little Monster/Configuration.h index 5f204bcd4a..726949be39 100644 --- a/config/examples/delta/Tevo Little Monster/Configuration.h +++ b/config/examples/delta/Tevo Little Monster/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/delta/Tevo Little Monster/Configuration_adv.h b/config/examples/delta/Tevo Little Monster/Configuration_adv.h index 35a161b5a3..7b186099f7 100644 --- a/config/examples/delta/Tevo Little Monster/Configuration_adv.h +++ b/config/examples/delta/Tevo Little Monster/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/delta/Velleman/K8800/Configuration.h b/config/examples/delta/Velleman/K8800/Configuration.h index 53c90215b9..e8e8bb960a 100644 --- a/config/examples/delta/Velleman/K8800/Configuration.h +++ b/config/examples/delta/Velleman/K8800/Configuration.h @@ -577,6 +577,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 5 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/delta/Velleman/K8800/Configuration_adv.h b/config/examples/delta/Velleman/K8800/Configuration_adv.h index 02630584a7..c971498d27 100644 --- a/config/examples/delta/Velleman/K8800/Configuration_adv.h +++ b/config/examples/delta/Velleman/K8800/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/delta/generic/Configuration.h b/config/examples/delta/generic/Configuration.h index b6f9d74b76..81be9840fb 100644 --- a/config/examples/delta/generic/Configuration.h +++ b/config/examples/delta/generic/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/delta/generic/Configuration_adv.h b/config/examples/delta/generic/Configuration_adv.h index c21a0bafca..266d2108f9 100644 --- a/config/examples/delta/generic/Configuration_adv.h +++ b/config/examples/delta/generic/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/delta/kossel_clear/Configuration.h b/config/examples/delta/kossel_clear/Configuration.h index 45301970e2..67b2741f39 100644 --- a/config/examples/delta/kossel_clear/Configuration.h +++ b/config/examples/delta/kossel_clear/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/delta/kossel_clear/Configuration_adv.h b/config/examples/delta/kossel_clear/Configuration_adv.h index 59967abfdc..b69166d4ae 100644 --- a/config/examples/delta/kossel_clear/Configuration_adv.h +++ b/config/examples/delta/kossel_clear/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/delta/kossel_mini/Configuration.h b/config/examples/delta/kossel_mini/Configuration.h index 352e67b17f..4c503aef99 100644 --- a/config/examples/delta/kossel_mini/Configuration.h +++ b/config/examples/delta/kossel_mini/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/delta/kossel_pro/Configuration.h b/config/examples/delta/kossel_pro/Configuration.h index 2a722b7d10..0438dee7bb 100644 --- a/config/examples/delta/kossel_pro/Configuration.h +++ b/config/examples/delta/kossel_pro/Configuration.h @@ -570,6 +570,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/delta/kossel_xl/Configuration.h b/config/examples/delta/kossel_xl/Configuration.h index 4811ea6630..90cc4d2d16 100644 --- a/config/examples/delta/kossel_xl/Configuration.h +++ b/config/examples/delta/kossel_xl/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/delta/kossel_xl/Configuration_adv.h b/config/examples/delta/kossel_xl/Configuration_adv.h index d73e7661ac..0dcdb19251 100644 --- a/config/examples/delta/kossel_xl/Configuration_adv.h +++ b/config/examples/delta/kossel_xl/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/gCreate/gMax1.5+/Configuration.h b/config/examples/gCreate/gMax1.5+/Configuration.h index 5236839665..f59594e050 100644 --- a/config/examples/gCreate/gMax1.5+/Configuration.h +++ b/config/examples/gCreate/gMax1.5+/Configuration.h @@ -572,6 +572,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 16 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/config/examples/gCreate/gMax1.5+/Configuration_adv.h index d71441f6e4..3db1e45e51 100644 --- a/config/examples/gCreate/gMax1.5+/Configuration_adv.h +++ b/config/examples/gCreate/gMax1.5+/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration.h b/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration.h index f2a84cadbf..7bfd1b0475 100644 --- a/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration.h +++ b/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration.h @@ -578,6 +578,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration_adv.h b/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration_adv.h index d59975ccfc..23f0781504 100644 --- a/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration_adv.h +++ b/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration.h b/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration.h index 6341968640..a2471a8860 100644 --- a/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration.h +++ b/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration.h @@ -553,6 +553,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration_adv.h b/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration_adv.h index b491b31578..c87ee25f62 100644 --- a/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration_adv.h +++ b/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/makibox/Configuration.h b/config/examples/makibox/Configuration.h index bb0000f232..723f6743b9 100644 --- a/config/examples/makibox/Configuration.h +++ b/config/examples/makibox/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/makibox/Configuration_adv.h b/config/examples/makibox/Configuration_adv.h index 95e16fb0c5..12906926e0 100644 --- a/config/examples/makibox/Configuration_adv.h +++ b/config/examples/makibox/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit. diff --git a/config/examples/tvrrug/Round2/Configuration.h b/config/examples/tvrrug/Round2/Configuration.h index 7c533addae..73f6d54330 100644 --- a/config/examples/tvrrug/Round2/Configuration.h +++ b/config/examples/tvrrug/Round2/Configuration.h @@ -566,6 +566,10 @@ #define MAX31865_SENSOR_OHMS_1 100 #define MAX31865_CALIBRATION_OHMS_1 430 #endif +#if TEMP_SENSOR_IS_MAX_TC(2) + #define MAX31865_SENSOR_OHMS_2 100 + #define MAX31865_CALIBRATION_OHMS_2 430 +#endif #if HAS_E_TEMP_SENSOR #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 diff --git a/config/examples/tvrrug/Round2/Configuration_adv.h b/config/examples/tvrrug/Round2/Configuration_adv.h index 48e0a9597d..5562dac44c 100644 --- a/config/examples/tvrrug/Round2/Configuration_adv.h +++ b/config/examples/tvrrug/Round2/Configuration_adv.h @@ -175,6 +175,7 @@ //#define TEMP_SENSOR_FORCE_HW_SPI // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus. //#define MAX31865_SENSOR_WIRES_0 2 // (2-4) Number of wires for the probe connected to a MAX31865 board. //#define MAX31865_SENSOR_WIRES_1 2 +//#define MAX31865_SENSOR_WIRES_2 2 //#define MAX31865_50HZ_FILTER // Use a 50Hz filter instead of the default 60Hz. //#define MAX31865_USE_READ_ERROR_DETECTION // Treat value spikes (20°C delta in under 1s) as read errors. @@ -185,6 +186,7 @@ //#define MAX31865_WIRE_OHMS_0 0.95f // For 2-wire, set the wire resistances for more accurate readings. //#define MAX31865_WIRE_OHMS_1 0.0f +//#define MAX31865_WIRE_OHMS_2 0.0f /** * Hephestos 2 24V heated bed upgrade kit.