🐛 Fix generic foam cutter

config/examples/FoamCutter/generic/Configuration.h

@@ -126,7 +126,7 @@
 //#define BLUETOOTH
 
 // Name displayed in the LCD "Ready" message and Info menu
-//#define CUSTOM_MACHINE_NAME "3D Printer"
+#define CUSTOM_MACHINE_NAME "Foam Cutter"
 
 // Printer's unique ID, used by some programs to differentiate between machines.
 // Choose your own or use a service like https://www.uuidgenerator.net/version4
@@ -157,8 +157,8 @@
 //#define Z2_DRIVER_TYPE A4988
 //#define Z3_DRIVER_TYPE A4988
 //#define Z4_DRIVER_TYPE A4988
-//#define I_DRIVER_TYPE  A4988
+#define I_DRIVER_TYPE  A4988
-//#define J_DRIVER_TYPE  A4988
+#define J_DRIVER_TYPE  A4988
 //#define K_DRIVER_TYPE  A4988
 //#define U_DRIVER_TYPE  A4988
 //#define V_DRIVER_TYPE  A4988
@@ -218,7 +218,7 @@
 
 // This defines the number of extruders
 // :[0, 1, 2, 3, 4, 5, 6, 7, 8]
-#define EXTRUDERS 1
+#define EXTRUDERS 0
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
 #define DEFAULT_NOMINAL_FILAMENT_DIA 1.75
@@ -1225,14 +1225,14 @@
  * Override with M92
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
-#define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 500 }
+#define DEFAULT_AXIS_STEPS_PER_UNIT   { 1066, 1066, 1066, 1066, 1066 }
 
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
-#define DEFAULT_MAX_FEEDRATE          { 300, 300, 5, 25 }
+#define DEFAULT_MAX_FEEDRATE          { 5, 5, 5, 5, 5 }
 
 //#define LIMITED_MAX_FR_EDITING        // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2
 #if ENABLED(LIMITED_MAX_FR_EDITING)
@@ -1245,7 +1245,7 @@
  * Override with M201
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
-#define DEFAULT_MAX_ACCELERATION      { 3000, 3000, 100, 10000 }
+#define DEFAULT_MAX_ACCELERATION      { 16, 16, 16, 16, 16 }
 
 //#define LIMITED_MAX_ACCEL_EDITING     // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2
 #if ENABLED(LIMITED_MAX_ACCEL_EDITING)
@@ -1262,9 +1262,9 @@
  *   M204 I    Angular Acceleration
  *   M204 J    Angular Travel Acceleration
  */
-#define DEFAULT_ACCELERATION                  3000  // X, Y, Z ... and E acceleration for printing moves
+#define DEFAULT_ACCELERATION                    16  // X, Y, Z ... and E acceleration for printing moves
 #define DEFAULT_RETRACT_ACCELERATION          3000  // E acceleration for retracts
-#define DEFAULT_TRAVEL_ACCELERATION           3000  // X, Y, Z ... acceleration for travel (non printing) moves
+#define DEFAULT_TRAVEL_ACCELERATION            400  // X, Y, Z ... acceleration for travel (non printing) moves
 #if ENABLED(AXIS4_ROTATES)
   #define DEFAULT_ANGULAR_ACCELERATION        3000  // I, J, K acceleration for rotational-only printing moves
   #define DEFAULT_ANGULAR_TRAVEL_ACCELERATION 3000  // I, J, K acceleration for rotational-only travel (non printing) moves
@@ -1682,8 +1682,8 @@
 #define Y_ENABLE_ON 0
 #define Z_ENABLE_ON 0
 #define E_ENABLE_ON 0 // For all extruders
-//#define I_ENABLE_ON 0
+#define I_ENABLE_ON 0
-//#define J_ENABLE_ON 0
+#define J_ENABLE_ON 0
 //#define K_ENABLE_ON 0
 //#define U_ENABLE_ON 0
 //#define V_ENABLE_ON 0
@@ -1712,11 +1712,11 @@
 // @section motion
 
 // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
-#define INVERT_X_DIR false
+#define INVERT_X_DIR true
-#define INVERT_Y_DIR true
+#define INVERT_Y_DIR false
 #define INVERT_Z_DIR false
-//#define INVERT_I_DIR false
+#define INVERT_I_DIR true
-//#define INVERT_J_DIR false
+#define INVERT_J_DIR false
 //#define INVERT_K_DIR false
 //#define INVERT_U_DIR false
 //#define INVERT_V_DIR false
@@ -1756,8 +1756,8 @@
 #define X_HOME_DIR -1
 #define Y_HOME_DIR -1
 #define Z_HOME_DIR -1
-//#define I_HOME_DIR -1
+#define I_HOME_DIR -1
-//#define J_HOME_DIR -1
+#define J_HOME_DIR -1
 //#define K_HOME_DIR -1
 //#define U_HOME_DIR -1
 //#define V_HOME_DIR -1
@@ -1776,10 +1776,10 @@
 #define X_MAX_POS X_BED_SIZE
 #define Y_MAX_POS Y_BED_SIZE
 #define Z_MAX_POS 200
-//#define I_MIN_POS 0
+#define I_MIN_POS 0
-//#define I_MAX_POS 50
+#define I_MAX_POS X_BED_SIZE
-//#define J_MIN_POS 0
+#define J_MIN_POS 0
-//#define J_MAX_POS 50
+#define J_MAX_POS Y_BED_SIZE
 //#define K_MIN_POS 0
 //#define K_MAX_POS 50
 //#define U_MIN_POS 0
@@ -2240,7 +2240,7 @@
 #endif
 
 // Homing speeds (linear=mm/min, rotational=°/min)
-#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) }
+#define HOMING_FEEDRATE_MM_M { (5*60), (5*60), (5*60), (5*60), (5*60)}
 
 // Validate that endstops are triggered on homing moves
 #define VALIDATE_HOMING_ENDSTOPS
@@ -2318,7 +2318,7 @@
  *   M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes)
  *   M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.)
  */
-//#define EEPROM_SETTINGS     // Persistent storage with M500 and M501
+#define EEPROM_SETTINGS     // Persistent storage with M500 and M501
 //#define DISABLE_M503        // Saves ~2700 bytes of flash. Disable for release!
 #define EEPROM_CHITCHAT       // Give feedback on EEPROM commands. Disable to save PROGMEM.
 #define EEPROM_BOOT_SILENT    // Keep M503 quiet and only give errors during first load
@@ -2608,7 +2608,7 @@
  * SD Card support is disabled by default. If your controller has an SD slot,
  * you must uncomment the following option or it won't work.
  */
-//#define SDSUPPORT
+#define SDSUPPORT
 
 /**
  * SD CARD: ENABLE CRC
@@ -2655,7 +2655,7 @@
 //
 //  Set this option if CLOCKWISE causes values to DECREASE
 //
-//#define REVERSE_ENCODER_DIRECTION
+#define REVERSE_ENCODER_DIRECTION
 
 //
 // This option reverses the encoder direction for navigating LCD menus.
@@ -2688,7 +2688,7 @@
 //
 // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu.
 //
-//#define INDIVIDUAL_AXIS_HOMING_MENU
+#define INDIVIDUAL_AXIS_HOMING_MENU
 //#define INDIVIDUAL_AXIS_HOMING_SUBMENU
 
 //
@@ -2891,7 +2891,7 @@
 // RepRapDiscount FULL GRAPHIC Smart Controller
 // https://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller
 //
-//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
+#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
 
 //
 // K.3D Full Graphic Smart Controller