diff --git a/config/default/Configuration_adv.h b/config/default/Configuration_adv.h
index 7d7f30b23e..fc77345b9b 100644
--- a/config/default/Configuration_adv.h
+++ b/config/default/Configuration_adv.h
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h
index a5c9273a38..b1dfc5fedf 100644
--- a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h
+++ b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h
index 72286deff6..c06c640f4b 100644
--- a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h	
+++ b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h	
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h
index b069974402..636b8b6e7c 100644
--- a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h	
+++ b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h	
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/AlephObjects/TAZ4/Configuration_adv.h b/config/examples/AlephObjects/TAZ4/Configuration_adv.h
index 5e5c62451b..fdb56f5005 100644
--- a/config/examples/AlephObjects/TAZ4/Configuration_adv.h
+++ b/config/examples/AlephObjects/TAZ4/Configuration_adv.h
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h
index f1c82eb26e..44168e4f1e 100644
--- a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h
+++ b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h
@@ -2473,10 +2473,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Alfawise/U20/Configuration_adv.h b/config/examples/Alfawise/U20/Configuration_adv.h
index b6e6c79aa8..32d09d3584 100644
--- a/config/examples/Alfawise/U20/Configuration_adv.h
+++ b/config/examples/Alfawise/U20/Configuration_adv.h
@@ -2472,10 +2472,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/AliExpress/UM2pExt/Configuration_adv.h b/config/examples/AliExpress/UM2pExt/Configuration_adv.h
index eea397f84d..c2a7a770e6 100644
--- a/config/examples/AliExpress/UM2pExt/Configuration_adv.h
+++ b/config/examples/AliExpress/UM2pExt/Configuration_adv.h
@@ -2473,10 +2473,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Anet/A2/Configuration_adv.h b/config/examples/Anet/A2/Configuration_adv.h
index 58ed5bcdbf..896435d2b0 100644
--- a/config/examples/Anet/A2/Configuration_adv.h
+++ b/config/examples/Anet/A2/Configuration_adv.h
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Anet/A2plus/Configuration_adv.h b/config/examples/Anet/A2plus/Configuration_adv.h
index 58ed5bcdbf..896435d2b0 100644
--- a/config/examples/Anet/A2plus/Configuration_adv.h
+++ b/config/examples/Anet/A2plus/Configuration_adv.h
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Anet/A6/Configuration_adv.h b/config/examples/Anet/A6/Configuration_adv.h
index 3e26287ef2..5d07267994 100644
--- a/config/examples/Anet/A6/Configuration_adv.h
+++ b/config/examples/Anet/A6/Configuration_adv.h
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Anet/A8/Configuration_adv.h b/config/examples/Anet/A8/Configuration_adv.h
index 62377d4859..d9081649b3 100644
--- a/config/examples/Anet/A8/Configuration_adv.h
+++ b/config/examples/Anet/A8/Configuration_adv.h
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Anet/A8plus/Configuration_adv.h b/config/examples/Anet/A8plus/Configuration_adv.h
index 86bdcafaae..6b8e282a65 100644
--- a/config/examples/Anet/A8plus/Configuration_adv.h
+++ b/config/examples/Anet/A8plus/Configuration_adv.h
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Anet/E10/Configuration_adv.h b/config/examples/Anet/E10/Configuration_adv.h
index 10dcbee1b7..82650b8a63 100644
--- a/config/examples/Anet/E10/Configuration_adv.h
+++ b/config/examples/Anet/E10/Configuration_adv.h
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Anet/E16/Configuration_adv.h b/config/examples/Anet/E16/Configuration_adv.h
index 994576d9ae..b7b0fe4411 100644
--- a/config/examples/Anet/E16/Configuration_adv.h
+++ b/config/examples/Anet/E16/Configuration_adv.h
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Anet/ET4/Configuration_adv.h b/config/examples/Anet/ET4/Configuration_adv.h
index 80af0f1be6..bd74e23076 100644
--- a/config/examples/Anet/ET4/Configuration_adv.h
+++ b/config/examples/Anet/ET4/Configuration_adv.h
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_24V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/AnyCubic/Chiron/Configuration_adv.h b/config/examples/AnyCubic/Chiron/Configuration_adv.h
index 07b2a910a3..53678e3b07 100644
--- a/config/examples/AnyCubic/Chiron/Configuration_adv.h
+++ b/config/examples/AnyCubic/Chiron/Configuration_adv.h
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h
index 89485cdf82..4d108552b3 100644
--- a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h	
+++ b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h	
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h
index 322bba7d86..62827be891 100644
--- a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h	
+++ b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h	
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/AnyCubic/i3 Mega/Configuration_adv.h b/config/examples/AnyCubic/i3 Mega/Configuration_adv.h
index ff0e9db28c..38679d7231 100644
--- a/config/examples/AnyCubic/i3 Mega/Configuration_adv.h	
+++ b/config/examples/AnyCubic/i3 Mega/Configuration_adv.h	
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/AnyCubic/i3/Configuration_adv.h b/config/examples/AnyCubic/i3/Configuration_adv.h
index 70ef77990d..2a67d4fd96 100644
--- a/config/examples/AnyCubic/i3/Configuration_adv.h
+++ b/config/examples/AnyCubic/i3/Configuration_adv.h
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/ArmEd/Configuration_adv.h b/config/examples/ArmEd/Configuration_adv.h
index eb3ce5c99e..5e5fac951d 100644
--- a/config/examples/ArmEd/Configuration_adv.h
+++ b/config/examples/ArmEd/Configuration_adv.h
@@ -2475,10 +2475,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Artillery/Genius/Configuration_adv.h b/config/examples/Artillery/Genius/Configuration_adv.h
index c88f86b08b..547f81fd9b 100644
--- a/config/examples/Artillery/Genius/Configuration_adv.h
+++ b/config/examples/Artillery/Genius/Configuration_adv.h
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_24V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Artillery/Sidewinder X1/Configuration_adv.h b/config/examples/Artillery/Sidewinder X1/Configuration_adv.h
index c88f86b08b..547f81fd9b 100644
--- a/config/examples/Artillery/Sidewinder X1/Configuration_adv.h	
+++ b/config/examples/Artillery/Sidewinder X1/Configuration_adv.h	
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_24V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration_adv.h b/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration_adv.h
index 519a49946e..02c4435852 100644
--- a/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration_adv.h	
+++ b/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration_adv.h	
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_24VV
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
index af61e967b8..0520237531 100644
--- a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
+++ b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/BIBO/TouchX/default/Configuration_adv.h b/config/examples/BIBO/TouchX/default/Configuration_adv.h
index ca3e397537..6566d05afa 100644
--- a/config/examples/BIBO/TouchX/default/Configuration_adv.h
+++ b/config/examples/BIBO/TouchX/default/Configuration_adv.h
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/BIQU/B1-BLTouch/Configuration_adv.h b/config/examples/BIQU/B1-BLTouch/Configuration_adv.h
index 33f4ec32b8..ab3634eb11 100644
--- a/config/examples/BIQU/B1-BLTouch/Configuration_adv.h
+++ b/config/examples/BIQU/B1-BLTouch/Configuration_adv.h
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_24V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/BIQU/B1/Configuration_adv.h b/config/examples/BIQU/B1/Configuration_adv.h
index a7f1ce8467..06794c2c7a 100644
--- a/config/examples/BIQU/B1/Configuration_adv.h
+++ b/config/examples/BIQU/B1/Configuration_adv.h
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_24V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/BQ/Hephestos/Configuration_adv.h b/config/examples/BQ/Hephestos/Configuration_adv.h
index 75d82bd8c8..6b585285b2 100644
--- a/config/examples/BQ/Hephestos/Configuration_adv.h
+++ b/config/examples/BQ/Hephestos/Configuration_adv.h
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/BQ/Hephestos_2/Configuration_adv.h b/config/examples/BQ/Hephestos_2/Configuration_adv.h
index f4be41ef02..c0b774e8dd 100644
--- a/config/examples/BQ/Hephestos_2/Configuration_adv.h
+++ b/config/examples/BQ/Hephestos_2/Configuration_adv.h
@@ -2479,10 +2479,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/BQ/WITBOX/Configuration_adv.h b/config/examples/BQ/WITBOX/Configuration_adv.h
index 75d82bd8c8..6b585285b2 100644
--- a/config/examples/BQ/WITBOX/Configuration_adv.h
+++ b/config/examples/BQ/WITBOX/Configuration_adv.h
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Cartesio/Configuration_adv.h b/config/examples/Cartesio/Configuration_adv.h
index 4680ccbe05..6a28142824 100644
--- a/config/examples/Cartesio/Configuration_adv.h
+++ b/config/examples/Cartesio/Configuration_adv.h
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h
index deef2bb376..9a40e9d320 100644
--- a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h	
+++ b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h	
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h
index 5e16a78cb1..7b0ef6f9cb 100644
--- a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h	
+++ b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h	
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h
index d003d6e76e..3084a42d16 100644
--- a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h	
+++ b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h	
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h
index d003d6e76e..3084a42d16 100644
--- a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h	
+++ b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h	
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/CR-10 V2/Configuration_adv.h b/config/examples/Creality/CR-10 V2/Configuration_adv.h
index b5339442d5..7fb27c085b 100644
--- a/config/examples/Creality/CR-10 V2/Configuration_adv.h	
+++ b/config/examples/Creality/CR-10 V2/Configuration_adv.h	
@@ -2474,10 +2474,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_24V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h
index 7d32c68837..a8d45bccbf 100644
--- a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h	
+++ b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h	
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h
index 663ae8ca96..887ad52e08 100644
--- a/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h
+++ b/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h
index 08e83046af..8505de70ef 100644
--- a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h	
+++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h	
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h
index 6274b772ee..30b4c76dd1 100644
--- a/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h
+++ b/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/CR-20 Pro/Configuration_adv.h b/config/examples/Creality/CR-20 Pro/Configuration_adv.h
index 5daac38638..9530fc4395 100644
--- a/config/examples/Creality/CR-20 Pro/Configuration_adv.h	
+++ b/config/examples/Creality/CR-20 Pro/Configuration_adv.h	
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/CR-20/Configuration_adv.h b/config/examples/Creality/CR-20/Configuration_adv.h
index 70362af983..279b1c4ef9 100644
--- a/config/examples/Creality/CR-20/Configuration_adv.h
+++ b/config/examples/Creality/CR-20/Configuration_adv.h
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/CR-8/Configuration_adv.h b/config/examples/Creality/CR-8/Configuration_adv.h
index 83450bb883..fb5be22a89 100644
--- a/config/examples/Creality/CR-8/Configuration_adv.h
+++ b/config/examples/Creality/CR-8/Configuration_adv.h
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/Ender-2/Configuration_adv.h b/config/examples/Creality/Ender-2/Configuration_adv.h
index a9c56893f6..82b00c44a1 100644
--- a/config/examples/Creality/Ender-2/Configuration_adv.h
+++ b/config/examples/Creality/Ender-2/Configuration_adv.h
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/Ender-3 Pro V1.5/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro V1.5/Configuration_adv.h
index da5384eb2c..5c77576f47 100644
--- a/config/examples/Creality/Ender-3 Pro V1.5/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-3 Pro V1.5/Configuration_adv.h	
@@ -2472,10 +2472,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h
index c588984f2c..3e086926d8 100644
--- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h	
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_24V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h
index 29cbd9f196..3d9522dff0 100644
--- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h	
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_24V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h
index 7c6a7ecd4e..e736f67e95 100644
--- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h	
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_24V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h
index a8dd0a7dc5..7f10cbb29e 100644
--- a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h	
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_24V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h
index 137d5dca72..5e05e6a3d9 100644
--- a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h	
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_24V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/Ender-3 V2/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/Configuration_adv.h
index e377c37cde..6889e72426 100644
--- a/config/examples/Creality/Ender-3 V2/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-3 V2/Configuration_adv.h	
@@ -2472,10 +2472,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h
index 5786b50d63..3a746b966b 100644
--- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h	
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_24V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h
index 2f2069a318..ff79eb24e3 100644
--- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h	
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_24V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h
index 5786b50d63..3a746b966b 100644
--- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h	
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_24V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h
index f46a5b27cf..a1862153de 100644
--- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h	
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_24V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h
index adaf55d029..129617163f 100644
--- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h	
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_24V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h
index 2829878f2e..baa5fd6327 100644
--- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h	
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_24V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h
index d0d944fb6a..c3cb8e48f9 100644
--- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h	
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_24V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h
index 8120ca9cc1..9dccbd180a 100644
--- a/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h
+++ b/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_24V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h
index 3978706c43..de9f37fd4a 100644
--- a/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h
+++ b/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_24V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h
index a5dc299ce3..52e03e699d 100644
--- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h	
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_24V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h
index a5dc299ce3..52e03e699d 100644
--- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h	
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_24V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h
index a5dc299ce3..52e03e699d 100644
--- a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h	
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_24V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h
index a5dc299ce3..52e03e699d 100644
--- a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h	
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_24V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h
index 659b10755d..48887fda47 100644
--- a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h
+++ b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_PRUSAMK3_24V
+  #define CHOPPER_TIMING CHOPPER_PRUSAMK3_24V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/Ender-3/MKS Robin E3 1.0/Configuration_adv.h b/config/examples/Creality/Ender-3/MKS Robin E3 1.0/Configuration_adv.h
index 4304b724fb..f121ff1080 100644
--- a/config/examples/Creality/Ender-3/MKS Robin E3 1.0/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-3/MKS Robin E3 1.0/Configuration_adv.h	
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_24V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/Ender-4/Configuration_adv.h b/config/examples/Creality/Ender-4/Configuration_adv.h
index 62f5e72018..aeb2cf4e88 100644
--- a/config/examples/Creality/Ender-4/Configuration_adv.h
+++ b/config/examples/Creality/Ender-4/Configuration_adv.h
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/Ender-5 Plus/Configuration_adv.h b/config/examples/Creality/Ender-5 Plus/Configuration_adv.h
index 026518b352..5627082cd2 100644
--- a/config/examples/Creality/Ender-5 Plus/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-5 Plus/Configuration_adv.h	
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/Ender-5 Pro/Creality/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/Creality/Configuration_adv.h
index bbc45dc469..7f7586ee62 100644
--- a/config/examples/Creality/Ender-5 Pro/Creality/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-5 Pro/Creality/Configuration_adv.h	
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_24V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h
index 7f257f82a8..b554769828 100644
--- a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h	
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_24V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h
index bbc45dc469..7f7586ee62 100644
--- a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h	
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_24V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h
index 7df71ea835..5f95b5230e 100644
--- a/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h	
@@ -2475,10 +2475,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_24V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h
index 2b7984443c..e31ce41a22 100644
--- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h	
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_24V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/Ender-5/Creality/Configuration_adv.h b/config/examples/Creality/Ender-5/Creality/Configuration_adv.h
index 1fd4d870c6..f63d59a26f 100644
--- a/config/examples/Creality/Ender-5/Creality/Configuration_adv.h
+++ b/config/examples/Creality/Ender-5/Creality/Configuration_adv.h
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_24V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h
index 1fd4d870c6..f63d59a26f 100644
--- a/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h
+++ b/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_24V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h
index ee301fc0c7..5a5b1858c3 100644
--- a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h	
+++ b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h	
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Daycom/3DP-100/Configuration_adv.h b/config/examples/Daycom/3DP-100/Configuration_adv.h
index fd76b5a516..f81cc30b71 100644
--- a/config/examples/Daycom/3DP-100/Configuration_adv.h
+++ b/config/examples/Daycom/3DP-100/Configuration_adv.h
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h b/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h
index f69c09b221..140fdd38ea 100644
--- a/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h	
+++ b/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h	
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Einstart-S/Configuration_adv.h b/config/examples/Einstart-S/Configuration_adv.h
index b2ed639885..f3e31a4893 100644
--- a/config/examples/Einstart-S/Configuration_adv.h
+++ b/config/examples/Einstart-S/Configuration_adv.h
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/FYSETC/AIO_II/Configuration_adv.h b/config/examples/FYSETC/AIO_II/Configuration_adv.h
index a04675ab34..d166380983 100644
--- a/config/examples/FYSETC/AIO_II/Configuration_adv.h
+++ b/config/examples/FYSETC/AIO_II/Configuration_adv.h
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/FYSETC/F6_13/Configuration_adv.h b/config/examples/FYSETC/F6_13/Configuration_adv.h
index 15de4949b6..b33ed77bb4 100644
--- a/config/examples/FYSETC/F6_13/Configuration_adv.h
+++ b/config/examples/FYSETC/F6_13/Configuration_adv.h
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/FYSETC/S6/Configuration_adv.h b/config/examples/FYSETC/S6/Configuration_adv.h
index 0c3d57440f..20ad8e3c57 100644
--- a/config/examples/FYSETC/S6/Configuration_adv.h
+++ b/config/examples/FYSETC/S6/Configuration_adv.h
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Felix/DUAL/Configuration_adv.h b/config/examples/Felix/DUAL/Configuration_adv.h
index aaba6e1c5d..a71c9bcc0a 100644
--- a/config/examples/Felix/DUAL/Configuration_adv.h
+++ b/config/examples/Felix/DUAL/Configuration_adv.h
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Felix/Single/Configuration_adv.h b/config/examples/Felix/Single/Configuration_adv.h
index aaba6e1c5d..a71c9bcc0a 100644
--- a/config/examples/Felix/Single/Configuration_adv.h
+++ b/config/examples/Felix/Single/Configuration_adv.h
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/FlashForge/Creator 2X/Configuration_adv.h b/config/examples/FlashForge/Creator 2X/Configuration_adv.h
index 2448e98ea8..120714fac0 100644
--- a/config/examples/FlashForge/Creator 2X/Configuration_adv.h	
+++ b/config/examples/FlashForge/Creator 2X/Configuration_adv.h	
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/FlashForge/CreatorPro/Configuration_adv.h b/config/examples/FlashForge/CreatorPro/Configuration_adv.h
index ec2f5cd2ea..a1456f87da 100644
--- a/config/examples/FlashForge/CreatorPro/Configuration_adv.h
+++ b/config/examples/FlashForge/CreatorPro/Configuration_adv.h
@@ -2470,10 +2470,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/FlyingBear/P905H/Configuration_adv.h b/config/examples/FlyingBear/P905H/Configuration_adv.h
index 0f9fe27435..c128203d3f 100644
--- a/config/examples/FlyingBear/P905H/Configuration_adv.h
+++ b/config/examples/FlyingBear/P905H/Configuration_adv.h
@@ -2474,10 +2474,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/config/examples/FolgerTech/i3-2020/Configuration_adv.h
index 47877c4ed4..d4a8508d13 100644
--- a/config/examples/FolgerTech/i3-2020/Configuration_adv.h
+++ b/config/examples/FolgerTech/i3-2020/Configuration_adv.h
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Formbot/Raptor/Configuration_adv.h b/config/examples/Formbot/Raptor/Configuration_adv.h
index 87b77a6331..04cb6f98e9 100644
--- a/config/examples/Formbot/Raptor/Configuration_adv.h
+++ b/config/examples/Formbot/Raptor/Configuration_adv.h
@@ -2473,10 +2473,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
index 22cc5a3857..3ffd146785 100644
--- a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
+++ b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
@@ -2472,10 +2472,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Formbot/T_Rex_3/Configuration_adv.h b/config/examples/Formbot/T_Rex_3/Configuration_adv.h
index 4a42356fb4..bebcc0757b 100644
--- a/config/examples/Formbot/T_Rex_3/Configuration_adv.h
+++ b/config/examples/Formbot/T_Rex_3/Configuration_adv.h
@@ -2476,10 +2476,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Geeetech/A10/Configuration_adv.h b/config/examples/Geeetech/A10/Configuration_adv.h
index 6ebad0f5b3..10f90a768b 100644
--- a/config/examples/Geeetech/A10/Configuration_adv.h
+++ b/config/examples/Geeetech/A10/Configuration_adv.h
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Geeetech/A10D/Configuration_adv.h b/config/examples/Geeetech/A10D/Configuration_adv.h
index 03225edbcd..3e02e75547 100644
--- a/config/examples/Geeetech/A10D/Configuration_adv.h
+++ b/config/examples/Geeetech/A10D/Configuration_adv.h
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Geeetech/A10M/Configuration_adv.h b/config/examples/Geeetech/A10M/Configuration_adv.h
index ce98212935..1af7e5b182 100644
--- a/config/examples/Geeetech/A10M/Configuration_adv.h
+++ b/config/examples/Geeetech/A10M/Configuration_adv.h
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Geeetech/A10T/Configuration_adv.h b/config/examples/Geeetech/A10T/Configuration_adv.h
index ce98212935..1af7e5b182 100644
--- a/config/examples/Geeetech/A10T/Configuration_adv.h
+++ b/config/examples/Geeetech/A10T/Configuration_adv.h
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Geeetech/A20/Configuration_adv.h b/config/examples/Geeetech/A20/Configuration_adv.h
index 733d18d7d0..aa65dad7ca 100644
--- a/config/examples/Geeetech/A20/Configuration_adv.h
+++ b/config/examples/Geeetech/A20/Configuration_adv.h
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Geeetech/A20M/Configuration_adv.h b/config/examples/Geeetech/A20M/Configuration_adv.h
index 733d18d7d0..aa65dad7ca 100644
--- a/config/examples/Geeetech/A20M/Configuration_adv.h
+++ b/config/examples/Geeetech/A20M/Configuration_adv.h
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Geeetech/A20T/Configuration_adv.h b/config/examples/Geeetech/A20T/Configuration_adv.h
index 733d18d7d0..aa65dad7ca 100644
--- a/config/examples/Geeetech/A20T/Configuration_adv.h
+++ b/config/examples/Geeetech/A20T/Configuration_adv.h
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Geeetech/A30/Configuration_adv.h b/config/examples/Geeetech/A30/Configuration_adv.h
index dca65625e6..320a87baa3 100644
--- a/config/examples/Geeetech/A30/Configuration_adv.h
+++ b/config/examples/Geeetech/A30/Configuration_adv.h
@@ -2470,10 +2470,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Geeetech/D200/Configuration_adv.h b/config/examples/Geeetech/D200/Configuration_adv.h
index 76ee774ba1..0b788e9a33 100644
--- a/config/examples/Geeetech/D200/Configuration_adv.h
+++ b/config/examples/Geeetech/D200/Configuration_adv.h
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Geeetech/Duplicator5/Configuration_adv.h b/config/examples/Geeetech/Duplicator5/Configuration_adv.h
index 0c3d57440f..20ad8e3c57 100644
--- a/config/examples/Geeetech/Duplicator5/Configuration_adv.h
+++ b/config/examples/Geeetech/Duplicator5/Configuration_adv.h
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Geeetech/E180/Configuration_adv.h b/config/examples/Geeetech/E180/Configuration_adv.h
index dca65625e6..320a87baa3 100644
--- a/config/examples/Geeetech/E180/Configuration_adv.h
+++ b/config/examples/Geeetech/E180/Configuration_adv.h
@@ -2470,10 +2470,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Geeetech/M201/Configuration_adv.h b/config/examples/Geeetech/M201/Configuration_adv.h
index 76ee774ba1..0b788e9a33 100644
--- a/config/examples/Geeetech/M201/Configuration_adv.h
+++ b/config/examples/Geeetech/M201/Configuration_adv.h
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Geeetech/MeCreator2/Configuration_adv.h b/config/examples/Geeetech/MeCreator2/Configuration_adv.h
index afecd46143..e95e6e4660 100644
--- a/config/examples/Geeetech/MeCreator2/Configuration_adv.h
+++ b/config/examples/Geeetech/MeCreator2/Configuration_adv.h
@@ -2470,10 +2470,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Geeetech/Me_creator/Configuration_adv.h b/config/examples/Geeetech/Me_creator/Configuration_adv.h
index 0c3d57440f..20ad8e3c57 100644
--- a/config/examples/Geeetech/Me_creator/Configuration_adv.h
+++ b/config/examples/Geeetech/Me_creator/Configuration_adv.h
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Geeetech/Me_ducer/Configuration_adv.h b/config/examples/Geeetech/Me_ducer/Configuration_adv.h
index 0c3d57440f..20ad8e3c57 100644
--- a/config/examples/Geeetech/Me_ducer/Configuration_adv.h
+++ b/config/examples/Geeetech/Me_ducer/Configuration_adv.h
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Geeetech/PI3A PRO/Configuration_adv.h b/config/examples/Geeetech/PI3A PRO/Configuration_adv.h
index fe8bc24884..33aea496dc 100644
--- a/config/examples/Geeetech/PI3A PRO/Configuration_adv.h	
+++ b/config/examples/Geeetech/PI3A PRO/Configuration_adv.h	
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h
index 6ebad0f5b3..10f90a768b 100644
--- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h	
+++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h	
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h
index 6ebad0f5b3..10f90a768b 100644
--- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h	
+++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h	
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/HMS434/Configuration_adv.h b/config/examples/HMS434/Configuration_adv.h
index c664cea37f..1431ba76da 100644
--- a/config/examples/HMS434/Configuration_adv.h
+++ b/config/examples/HMS434/Configuration_adv.h
@@ -2462,10 +2462,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Infitary/i3-M508/Configuration_adv.h b/config/examples/Infitary/i3-M508/Configuration_adv.h
index c5fcf8ffa1..540993bdfe 100644
--- a/config/examples/Infitary/i3-M508/Configuration_adv.h
+++ b/config/examples/Infitary/i3-M508/Configuration_adv.h
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Intamsys/FunmatHT_4988/Configuration_adv.h b/config/examples/Intamsys/FunmatHT_4988/Configuration_adv.h
index e7c13c5008..ceba5eb0ea 100644
--- a/config/examples/Intamsys/FunmatHT_4988/Configuration_adv.h
+++ b/config/examples/Intamsys/FunmatHT_4988/Configuration_adv.h
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/JGAurora/A1/Configuration_adv.h b/config/examples/JGAurora/A1/Configuration_adv.h
index cfffcdbf22..72a881c16d 100644
--- a/config/examples/JGAurora/A1/Configuration_adv.h
+++ b/config/examples/JGAurora/A1/Configuration_adv.h
@@ -2476,10 +2476,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/JGAurora/A5/Configuration_adv.h b/config/examples/JGAurora/A5/Configuration_adv.h
index b3807f7035..ca06881518 100644
--- a/config/examples/JGAurora/A5/Configuration_adv.h
+++ b/config/examples/JGAurora/A5/Configuration_adv.h
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/JGAurora/A5S/Configuration_adv.h b/config/examples/JGAurora/A5S/Configuration_adv.h
index cfffcdbf22..72a881c16d 100644
--- a/config/examples/JGAurora/A5S/Configuration_adv.h
+++ b/config/examples/JGAurora/A5S/Configuration_adv.h
@@ -2476,10 +2476,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/JGAurora/Magic/Configuration_adv.h b/config/examples/JGAurora/Magic/Configuration_adv.h
index 6e8da4beea..83ff384e66 100644
--- a/config/examples/JGAurora/Magic/Configuration_adv.h
+++ b/config/examples/JGAurora/Magic/Configuration_adv.h
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Kingroon/KP3/Configuration_adv.h b/config/examples/Kingroon/KP3/Configuration_adv.h
index 410d86b774..e7c8e7c106 100644
--- a/config/examples/Kingroon/KP3/Configuration_adv.h
+++ b/config/examples/Kingroon/KP3/Configuration_adv.h
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/MBot/Cube/Configuration_adv.h b/config/examples/MBot/Cube/Configuration_adv.h
index 8d4ad2481c..2eac1afcb6 100644
--- a/config/examples/MBot/Cube/Configuration_adv.h
+++ b/config/examples/MBot/Cube/Configuration_adv.h
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/MakerFarm/Pegasus_12/Configuration_adv.h b/config/examples/MakerFarm/Pegasus_12/Configuration_adv.h
index 163b7a2ca4..56a7a5a16d 100644
--- a/config/examples/MakerFarm/Pegasus_12/Configuration_adv.h
+++ b/config/examples/MakerFarm/Pegasus_12/Configuration_adv.h
@@ -2464,10 +2464,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/MakerParts/Configuration_adv.h b/config/examples/MakerParts/Configuration_adv.h
index ed84c9e820..0294de2fd3 100644
--- a/config/examples/MakerParts/Configuration_adv.h
+++ b/config/examples/MakerParts/Configuration_adv.h
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Malyan/M150/Configuration_adv.h b/config/examples/Malyan/M150/Configuration_adv.h
index d6405126c7..0a0484f889 100644
--- a/config/examples/Malyan/M150/Configuration_adv.h
+++ b/config/examples/Malyan/M150/Configuration_adv.h
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Malyan/M200/Configuration_adv.h b/config/examples/Malyan/M200/Configuration_adv.h
index e63ec36219..9b71c1b220 100644
--- a/config/examples/Malyan/M200/Configuration_adv.h
+++ b/config/examples/Malyan/M200/Configuration_adv.h
@@ -2473,10 +2473,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/config/examples/Micromake/C1/enhanced/Configuration_adv.h
index 5c4c48ef62..b90005f9f9 100644
--- a/config/examples/Micromake/C1/enhanced/Configuration_adv.h
+++ b/config/examples/Micromake/C1/enhanced/Configuration_adv.h
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Mks/Robin/Configuration_adv.h b/config/examples/Mks/Robin/Configuration_adv.h
index 7d7f30b23e..fc77345b9b 100644
--- a/config/examples/Mks/Robin/Configuration_adv.h
+++ b/config/examples/Mks/Robin/Configuration_adv.h
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Mks/Sbase/Configuration_adv.h b/config/examples/Mks/Sbase/Configuration_adv.h
index 7dc1499d02..8a709311db 100644
--- a/config/examples/Mks/Sbase/Configuration_adv.h
+++ b/config/examples/Mks/Sbase/Configuration_adv.h
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Modix/Big60/Configuration_adv.h b/config/examples/Modix/Big60/Configuration_adv.h
index 4a885b68d0..77828d873c 100644
--- a/config/examples/Modix/Big60/Configuration_adv.h
+++ b/config/examples/Modix/Big60/Configuration_adv.h
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Ortur 4/Configuration_adv.h b/config/examples/Ortur 4/Configuration_adv.h
index 2941f5dd4e..c71bac30f5 100644
--- a/config/examples/Ortur 4/Configuration_adv.h	
+++ b/config/examples/Ortur 4/Configuration_adv.h	
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h
index 66c5da4353..1704d69e7d 100644
--- a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h
+++ b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_24V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Qidi/Qidi 1/Configuration_adv.h b/config/examples/Qidi/Qidi 1/Configuration_adv.h
index 773c6c5861..371bafb09b 100644
--- a/config/examples/Qidi/Qidi 1/Configuration_adv.h	
+++ b/config/examples/Qidi/Qidi 1/Configuration_adv.h	
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/RapideLite/RL200/Configuration_adv.h b/config/examples/RapideLite/RL200/Configuration_adv.h
index c12ea0f253..e8b5b22a0e 100644
--- a/config/examples/RapideLite/RL200/Configuration_adv.h
+++ b/config/examples/RapideLite/RL200/Configuration_adv.h
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Renkforce/RF100/Configuration_adv.h b/config/examples/Renkforce/RF100/Configuration_adv.h
index 22a5344765..69cc7b106b 100644
--- a/config/examples/Renkforce/RF100/Configuration_adv.h
+++ b/config/examples/Renkforce/RF100/Configuration_adv.h
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Renkforce/RF100XL/Configuration_adv.h b/config/examples/Renkforce/RF100XL/Configuration_adv.h
index 22a5344765..69cc7b106b 100644
--- a/config/examples/Renkforce/RF100XL/Configuration_adv.h
+++ b/config/examples/Renkforce/RF100XL/Configuration_adv.h
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Renkforce/RF100v2/Configuration_adv.h b/config/examples/Renkforce/RF100v2/Configuration_adv.h
index 22a5344765..69cc7b106b 100644
--- a/config/examples/Renkforce/RF100v2/Configuration_adv.h
+++ b/config/examples/Renkforce/RF100v2/Configuration_adv.h
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/RigidBot/Configuration_adv.h b/config/examples/RigidBot/Configuration_adv.h
index 72399b85a9..6fe598b32c 100644
--- a/config/examples/RigidBot/Configuration_adv.h
+++ b/config/examples/RigidBot/Configuration_adv.h
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/SCARA/MP_SCARA/Configuration_adv.h b/config/examples/SCARA/MP_SCARA/Configuration_adv.h
index 6f1e84cd9b..3a7298ada8 100644
--- a/config/examples/SCARA/MP_SCARA/Configuration_adv.h
+++ b/config/examples/SCARA/MP_SCARA/Configuration_adv.h
@@ -2468,10 +2468,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/SCARA/Morgan/Configuration_adv.h b/config/examples/SCARA/Morgan/Configuration_adv.h
index 98a9da71ab..99f5d15cdb 100644
--- a/config/examples/SCARA/Morgan/Configuration_adv.h
+++ b/config/examples/SCARA/Morgan/Configuration_adv.h
@@ -2468,10 +2468,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h
index cc204e518c..c04b891cb6 100644
--- a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h
+++ b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Sanguinololu/Configuration_adv.h b/config/examples/Sanguinololu/Configuration_adv.h
index b2318bee58..dfde8dcb3d 100644
--- a/config/examples/Sanguinololu/Configuration_adv.h
+++ b/config/examples/Sanguinololu/Configuration_adv.h
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Sovol/SV-01/Configuration_adv.h b/config/examples/Sovol/SV-01/Configuration_adv.h
index f0905523c7..fed9f4b9f0 100644
--- a/config/examples/Sovol/SV-01/Configuration_adv.h
+++ b/config/examples/Sovol/SV-01/Configuration_adv.h
@@ -2469,10 +2469,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Tevo/Michelangelo/Configuration_adv.h b/config/examples/Tevo/Michelangelo/Configuration_adv.h
index 946bf1ef87..ad0140827a 100644
--- a/config/examples/Tevo/Michelangelo/Configuration_adv.h
+++ b/config/examples/Tevo/Michelangelo/Configuration_adv.h
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Tevo/Nereus/Configuration_adv.h b/config/examples/Tevo/Nereus/Configuration_adv.h
index 574ce12c86..f434fa5459 100644
--- a/config/examples/Tevo/Nereus/Configuration_adv.h
+++ b/config/examples/Tevo/Nereus/Configuration_adv.h
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_24V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Tevo/Tarantula Pro/Configuration_adv.h b/config/examples/Tevo/Tarantula Pro/Configuration_adv.h
index 4153b75c1e..0e550f67d7 100644
--- a/config/examples/Tevo/Tarantula Pro/Configuration_adv.h	
+++ b/config/examples/Tevo/Tarantula Pro/Configuration_adv.h	
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_24V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h
index 99d9803736..b961493582 100644
--- a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h	
+++ b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h	
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_24V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h
index 99d9803736..b961493582 100644
--- a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h	
+++ b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h	
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_24V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/TheBorg/Configuration_adv.h b/config/examples/TheBorg/Configuration_adv.h
index efc1bd50af..3c8fbb26f7 100644
--- a/config/examples/TheBorg/Configuration_adv.h
+++ b/config/examples/TheBorg/Configuration_adv.h
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/TinyBoy2/Configuration_adv.h b/config/examples/TinyBoy2/Configuration_adv.h
index 87b53fb076..11cf178dc2 100644
--- a/config/examples/TinyBoy2/Configuration_adv.h
+++ b/config/examples/TinyBoy2/Configuration_adv.h
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Tronxy/X3A/Configuration_adv.h b/config/examples/Tronxy/X3A/Configuration_adv.h
index 5e5135528f..b828fbcb88 100644
--- a/config/examples/Tronxy/X3A/Configuration_adv.h
+++ b/config/examples/Tronxy/X3A/Configuration_adv.h
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Tronxy/X5S-2E/Configuration_adv.h b/config/examples/Tronxy/X5S-2E/Configuration_adv.h
index 135b1b8c58..09ed42377b 100644
--- a/config/examples/Tronxy/X5S-2E/Configuration_adv.h
+++ b/config/examples/Tronxy/X5S-2E/Configuration_adv.h
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Tronxy/X5SA/Configuration_adv.h b/config/examples/Tronxy/X5SA/Configuration_adv.h
index 03723fda19..fb928055f3 100644
--- a/config/examples/Tronxy/X5SA/Configuration_adv.h
+++ b/config/examples/Tronxy/X5SA/Configuration_adv.h
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/UltiMachine/Archim1/Configuration_adv.h b/config/examples/UltiMachine/Archim1/Configuration_adv.h
index 913c61ef73..76abf84f4e 100644
--- a/config/examples/UltiMachine/Archim1/Configuration_adv.h
+++ b/config/examples/UltiMachine/Archim1/Configuration_adv.h
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/UltiMachine/Archim2/Configuration_adv.h b/config/examples/UltiMachine/Archim2/Configuration_adv.h
index dde9c397df..3ec02a5cca 100644
--- a/config/examples/UltiMachine/Archim2/Configuration_adv.h
+++ b/config/examples/UltiMachine/Archim2/Configuration_adv.h
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/VORONDesign/Configuration_adv.h b/config/examples/VORONDesign/Configuration_adv.h
index d4d64ba00a..f787d6dd84 100644
--- a/config/examples/VORONDesign/Configuration_adv.h
+++ b/config/examples/VORONDesign/Configuration_adv.h
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Velleman/K8200/Configuration_adv.h b/config/examples/Velleman/K8200/Configuration_adv.h
index dc2f7daa3e..577c68334a 100644
--- a/config/examples/Velleman/K8200/Configuration_adv.h
+++ b/config/examples/Velleman/K8200/Configuration_adv.h
@@ -2484,10 +2484,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h b/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h
index 87d34348f9..85d087f700 100644
--- a/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h
+++ b/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Velleman/K8400/Single-head/Configuration_adv.h b/config/examples/Velleman/K8400/Single-head/Configuration_adv.h
index 87d34348f9..85d087f700 100644
--- a/config/examples/Velleman/K8400/Single-head/Configuration_adv.h
+++ b/config/examples/Velleman/K8400/Single-head/Configuration_adv.h
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/WASP/PowerWASP/Configuration_adv.h b/config/examples/WASP/PowerWASP/Configuration_adv.h
index 331e16fd2d..35cfcd0d9d 100644
--- a/config/examples/WASP/PowerWASP/Configuration_adv.h
+++ b/config/examples/WASP/PowerWASP/Configuration_adv.h
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h b/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h
index a37ee0ab57..1e52623fd6 100644
--- a/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h	
+++ b/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h	
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h
index a317d71ad3..a3e18e39b3 100644
--- a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h	
+++ b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h	
@@ -2473,10 +2473,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h
index 98eb48cf32..a3d85cc261 100644
--- a/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h	
+++ b/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h	
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h
index 2cc07b8fb9..3a62e9edd6 100644
--- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h	
+++ b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h	
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Weistek/wt150/Configuration_adv.h b/config/examples/Weistek/wt150/Configuration_adv.h
index f5f0fbe0ac..7510dd33b1 100644
--- a/config/examples/Weistek/wt150/Configuration_adv.h
+++ b/config/examples/Weistek/wt150/Configuration_adv.h
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Zonestar/P802M/Configuration_adv.h b/config/examples/Zonestar/P802M/Configuration_adv.h
index ab7ac79558..dc5fe595b1 100644
--- a/config/examples/Zonestar/P802M/Configuration_adv.h
+++ b/config/examples/Zonestar/P802M/Configuration_adv.h
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h
index 981756ddea..cf1b3bbb9a 100755
--- a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h	
+++ b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h	
@@ -2467,10 +2467,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h
index ae227a3404..cd8de6157e 100644
--- a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h	
+++ b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h	
@@ -2474,10 +2474,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h
index fc92c28030..01dec75552 100644
--- a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h
+++ b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h
@@ -2473,10 +2473,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/delta/Anycubic/Predator/Configuration_adv.h b/config/examples/delta/Anycubic/Predator/Configuration_adv.h
index b4c973790a..61db355f8a 100644
--- a/config/examples/delta/Anycubic/Predator/Configuration_adv.h
+++ b/config/examples/delta/Anycubic/Predator/Configuration_adv.h
@@ -2485,10 +2485,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h
index e401b80124..9c5ec61cf6 100644
--- a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h
+++ b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h
@@ -2472,10 +2472,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h
index 160111f91a..13e4e91317 100644
--- a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h
+++ b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h
@@ -2473,10 +2473,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h b/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h
index be20f75b5a..08c87e4a7d 100644
--- a/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h
+++ b/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h
@@ -2473,10 +2473,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
index 32e9004175..03d6ffe756 100644
--- a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
+++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
@@ -2473,10 +2473,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/delta/FLSUN/kossel/Configuration_adv.h b/config/examples/delta/FLSUN/kossel/Configuration_adv.h
index 32e9004175..03d6ffe756 100644
--- a/config/examples/delta/FLSUN/kossel/Configuration_adv.h
+++ b/config/examples/delta/FLSUN/kossel/Configuration_adv.h
@@ -2473,10 +2473,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
index ab83625978..96531ecc00 100644
--- a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
+++ b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
@@ -2473,10 +2473,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/delta/Geeetech/G2/Configuration_adv.h b/config/examples/delta/Geeetech/G2/Configuration_adv.h
index 08e652385e..7d214f089b 100644
--- a/config/examples/delta/Geeetech/G2/Configuration_adv.h
+++ b/config/examples/delta/Geeetech/G2/Configuration_adv.h
@@ -2473,10 +2473,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h b/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h
index 746b971ca1..481eb2bba3 100644
--- a/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h
+++ b/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h
@@ -2473,10 +2473,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/delta/Geeetech/G2S/Configuration_adv.h b/config/examples/delta/Geeetech/G2S/Configuration_adv.h
index 746b971ca1..481eb2bba3 100644
--- a/config/examples/delta/Geeetech/G2S/Configuration_adv.h
+++ b/config/examples/delta/Geeetech/G2S/Configuration_adv.h
@@ -2473,10 +2473,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h b/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h
index 746b971ca1..481eb2bba3 100644
--- a/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h
+++ b/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h
@@ -2473,10 +2473,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h
index f1728c3f62..fbc88c288b 100644
--- a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h	
+++ b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h	
@@ -2473,10 +2473,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h b/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h
index ab74bb38bf..71ff790415 100644
--- a/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h
+++ b/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h
@@ -2473,10 +2473,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/delta/MKS/SBASE/Configuration_adv.h b/config/examples/delta/MKS/SBASE/Configuration_adv.h
index f7343363eb..1ec51dc650 100644
--- a/config/examples/delta/MKS/SBASE/Configuration_adv.h
+++ b/config/examples/delta/MKS/SBASE/Configuration_adv.h
@@ -2473,10 +2473,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/delta/Malyan M300/Configuration_adv.h b/config/examples/delta/Malyan M300/Configuration_adv.h
index 4781cfdcf7..702675631a 100644
--- a/config/examples/delta/Malyan M300/Configuration_adv.h	
+++ b/config/examples/delta/Malyan M300/Configuration_adv.h	
@@ -2473,10 +2473,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/delta/Tevo Little Monster/Configuration_adv.h b/config/examples/delta/Tevo Little Monster/Configuration_adv.h
index 6d82c865a1..cda5612fd1 100644
--- a/config/examples/delta/Tevo Little Monster/Configuration_adv.h	
+++ b/config/examples/delta/Tevo Little Monster/Configuration_adv.h	
@@ -2473,10 +2473,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/delta/generic/Configuration_adv.h b/config/examples/delta/generic/Configuration_adv.h
index ab83625978..96531ecc00 100644
--- a/config/examples/delta/generic/Configuration_adv.h
+++ b/config/examples/delta/generic/Configuration_adv.h
@@ -2473,10 +2473,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/delta/kossel_clear/Configuration_adv.h b/config/examples/delta/kossel_clear/Configuration_adv.h
index 80cf9dfebe..1c68a90c0b 100644
--- a/config/examples/delta/kossel_clear/Configuration_adv.h
+++ b/config/examples/delta/kossel_clear/Configuration_adv.h
@@ -2473,10 +2473,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/delta/kossel_xl/Configuration_adv.h b/config/examples/delta/kossel_xl/Configuration_adv.h
index 26480bc60e..1278695982 100644
--- a/config/examples/delta/kossel_xl/Configuration_adv.h
+++ b/config/examples/delta/kossel_xl/Configuration_adv.h
@@ -2473,10 +2473,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/config/examples/gCreate/gMax1.5+/Configuration_adv.h
index eb480bd99c..666317bf33 100644
--- a/config/examples/gCreate/gMax1.5+/Configuration_adv.h
+++ b/config/examples/gCreate/gMax1.5+/Configuration_adv.h
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/makibox/Configuration_adv.h b/config/examples/makibox/Configuration_adv.h
index 9475b132ca..7ba47bb77f 100644
--- a/config/examples/makibox/Configuration_adv.h
+++ b/config/examples/makibox/Configuration_adv.h
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/tvrrug/Round2/Configuration_adv.h b/config/examples/tvrrug/Round2/Configuration_adv.h
index eabfbcafd9..fd288f19aa 100644
--- a/config/examples/tvrrug/Round2/Configuration_adv.h
+++ b/config/examples/tvrrug/Round2/Configuration_adv.h
@@ -2471,10 +2471,26 @@
    * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
-   * Define you own with
+   * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers