diff --git a/config/default/Configuration_adv.h b/config/default/Configuration_adv.h
index db6417c7b8..37130350d9 100644
--- a/config/default/Configuration_adv.h
+++ b/config/default/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h
index 4a9b848bcf..824718539f 100644
--- a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h
+++ b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h
index aad040e8a2..80954b3d94 100644
--- a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h	
+++ b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h	
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h
index 0028f8a322..76431bde3f 100644
--- a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h	
+++ b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h	
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/AlephObjects/TAZ4/Configuration_adv.h b/config/examples/AlephObjects/TAZ4/Configuration_adv.h
index 8cdd0412f9..9e28b98c10 100644
--- a/config/examples/AlephObjects/TAZ4/Configuration_adv.h
+++ b/config/examples/AlephObjects/TAZ4/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h
index 6ee5b9d22e..c20b9ce20b 100644
--- a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h
+++ b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h
@@ -2716,22 +2716,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Alfawise/U20/Configuration_adv.h b/config/examples/Alfawise/U20/Configuration_adv.h
index a64bb46d92..7d5ecba14f 100644
--- a/config/examples/Alfawise/U20/Configuration_adv.h
+++ b/config/examples/Alfawise/U20/Configuration_adv.h
@@ -2706,22 +2706,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/AliExpress/UM2pExt/Configuration_adv.h b/config/examples/AliExpress/UM2pExt/Configuration_adv.h
index a7acd4c79c..beded21a81 100644
--- a/config/examples/AliExpress/UM2pExt/Configuration_adv.h
+++ b/config/examples/AliExpress/UM2pExt/Configuration_adv.h
@@ -2707,22 +2707,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Anet/A2/Configuration_adv.h b/config/examples/Anet/A2/Configuration_adv.h
index 12259ef860..fda47b945d 100644
--- a/config/examples/Anet/A2/Configuration_adv.h
+++ b/config/examples/Anet/A2/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Anet/A2plus/Configuration_adv.h b/config/examples/Anet/A2plus/Configuration_adv.h
index 12259ef860..fda47b945d 100644
--- a/config/examples/Anet/A2plus/Configuration_adv.h
+++ b/config/examples/Anet/A2plus/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Anet/A6/Configuration_adv.h b/config/examples/Anet/A6/Configuration_adv.h
index 54a68b31de..82fdfc5790 100644
--- a/config/examples/Anet/A6/Configuration_adv.h
+++ b/config/examples/Anet/A6/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Anet/A8/Configuration_adv.h b/config/examples/Anet/A8/Configuration_adv.h
index beb6eb3959..b40fead69e 100644
--- a/config/examples/Anet/A8/Configuration_adv.h
+++ b/config/examples/Anet/A8/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Anet/A8plus/Configuration_adv.h b/config/examples/Anet/A8plus/Configuration_adv.h
index 6011810bdb..6384db3ea3 100644
--- a/config/examples/Anet/A8plus/Configuration_adv.h
+++ b/config/examples/Anet/A8plus/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Anet/A9/Configuration_adv.h b/config/examples/Anet/A9/Configuration_adv.h
index fe06506451..9c7b7904e9 100644
--- a/config/examples/Anet/A9/Configuration_adv.h
+++ b/config/examples/Anet/A9/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Anet/E10/Configuration_adv.h b/config/examples/Anet/E10/Configuration_adv.h
index 35f39c4dcd..8e2dd9b18c 100644
--- a/config/examples/Anet/E10/Configuration_adv.h
+++ b/config/examples/Anet/E10/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h b/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h
index 2228169fbd..34311f300e 100644
--- a/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h	
+++ b/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h	
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Anet/E16/Stock/Configuration_adv.h b/config/examples/Anet/E16/Stock/Configuration_adv.h
index 828bfae085..c9dd0140b5 100644
--- a/config/examples/Anet/E16/Stock/Configuration_adv.h
+++ b/config/examples/Anet/E16/Stock/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Anet/ET4+/Configuration_adv.h b/config/examples/Anet/ET4+/Configuration_adv.h
index 82ff4ee101..8e05800e90 100644
--- a/config/examples/Anet/ET4+/Configuration_adv.h
+++ b/config/examples/Anet/ET4+/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_24V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_24V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_24V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_24V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_24V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_24V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_24V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_24V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_24V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_24V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_24V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_24V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_24V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_24V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_24V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_24V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Anet/ET4-Pro/Configuration_adv.h b/config/examples/Anet/ET4-Pro/Configuration_adv.h
index 82ff4ee101..8e05800e90 100644
--- a/config/examples/Anet/ET4-Pro/Configuration_adv.h
+++ b/config/examples/Anet/ET4-Pro/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_24V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_24V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_24V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_24V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_24V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_24V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_24V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_24V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_24V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_24V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_24V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_24V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_24V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_24V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_24V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_24V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Anet/ET4/Configuration_adv.h b/config/examples/Anet/ET4/Configuration_adv.h
index 6cd41dd2d1..7eda83825c 100644
--- a/config/examples/Anet/ET4/Configuration_adv.h
+++ b/config/examples/Anet/ET4/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_24V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_24V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_24V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_24V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_24V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_24V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_24V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_24V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_24V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_24V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_24V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_24V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_24V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_24V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_24V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_24V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Anet/ET4X/Configuration_adv.h b/config/examples/Anet/ET4X/Configuration_adv.h
index 6cd41dd2d1..7eda83825c 100644
--- a/config/examples/Anet/ET4X/Configuration_adv.h
+++ b/config/examples/Anet/ET4X/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_24V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_24V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_24V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_24V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_24V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_24V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_24V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_24V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_24V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_24V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_24V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_24V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_24V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_24V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_24V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_24V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Anet/ET5-Pro/Configuration_adv.h b/config/examples/Anet/ET5-Pro/Configuration_adv.h
index 057735e50f..0d4ec1cde8 100644
--- a/config/examples/Anet/ET5-Pro/Configuration_adv.h
+++ b/config/examples/Anet/ET5-Pro/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Anet/ET5/Configuration_adv.h b/config/examples/Anet/ET5/Configuration_adv.h
index 057735e50f..0d4ec1cde8 100644
--- a/config/examples/Anet/ET5/Configuration_adv.h
+++ b/config/examples/Anet/ET5/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Anet/ET5X/Configuration_adv.h b/config/examples/Anet/ET5X/Configuration_adv.h
index 057735e50f..0d4ec1cde8 100644
--- a/config/examples/Anet/ET5X/Configuration_adv.h
+++ b/config/examples/Anet/ET5X/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/AnyCubic/Chiron/Configuration_adv.h b/config/examples/AnyCubic/Chiron/Configuration_adv.h
index 9e84b52c00..69257d55fa 100644
--- a/config/examples/AnyCubic/Chiron/Configuration_adv.h
+++ b/config/examples/AnyCubic/Chiron/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h
index 031386a3e3..fd6b4ae68b 100644
--- a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h	
+++ b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h	
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h
index 91469d2a61..183faa43c5 100644
--- a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h	
+++ b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h	
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h
index 10a018c73e..3b3c579a9b 100644
--- a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h	
+++ b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h	
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/AnyCubic/i3 Mega/Configuration_adv.h b/config/examples/AnyCubic/i3 Mega/Configuration_adv.h
index 1d9a1771d8..f46fd2a4af 100644
--- a/config/examples/AnyCubic/i3 Mega/Configuration_adv.h	
+++ b/config/examples/AnyCubic/i3 Mega/Configuration_adv.h	
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/AnyCubic/i3/Configuration_adv.h b/config/examples/AnyCubic/i3/Configuration_adv.h
index 68d9da9816..334d569047 100644
--- a/config/examples/AnyCubic/i3/Configuration_adv.h
+++ b/config/examples/AnyCubic/i3/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/ArmEd/Configuration_adv.h b/config/examples/ArmEd/Configuration_adv.h
index b6ad2e54ea..9ac3c6f329 100644
--- a/config/examples/ArmEd/Configuration_adv.h
+++ b/config/examples/ArmEd/Configuration_adv.h
@@ -2709,22 +2709,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Artillery/Genius/Configuration_adv.h b/config/examples/Artillery/Genius/Configuration_adv.h
index adbabc1d17..450e2b97a1 100644
--- a/config/examples/Artillery/Genius/Configuration_adv.h
+++ b/config/examples/Artillery/Genius/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Artillery/Sidewinder X1/Configuration_adv.h b/config/examples/Artillery/Sidewinder X1/Configuration_adv.h
index adbabc1d17..450e2b97a1 100644
--- a/config/examples/Artillery/Sidewinder X1/Configuration_adv.h	
+++ b/config/examples/Artillery/Sidewinder X1/Configuration_adv.h	
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration_adv.h b/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration_adv.h
index fc5a0129bb..de85a2a50a 100644
--- a/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration_adv.h	
+++ b/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration_adv.h	
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Azteeg/X5GT/Configuration_adv.h b/config/examples/Azteeg/X5GT/Configuration_adv.h
index db6417c7b8..37130350d9 100644
--- a/config/examples/Azteeg/X5GT/Configuration_adv.h
+++ b/config/examples/Azteeg/X5GT/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
index 1b43810884..3d81588a1b 100644
--- a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
+++ b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/BIBO/TouchX/default/Configuration_adv.h b/config/examples/BIBO/TouchX/default/Configuration_adv.h
index 354e4edfa8..e12037315d 100644
--- a/config/examples/BIBO/TouchX/default/Configuration_adv.h
+++ b/config/examples/BIBO/TouchX/default/Configuration_adv.h
@@ -2698,22 +2698,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/BIQU/B1-BLTouch/Configuration_adv.h b/config/examples/BIQU/B1-BLTouch/Configuration_adv.h
index f6c3f87ea2..48f8effcf9 100644
--- a/config/examples/BIQU/B1-BLTouch/Configuration_adv.h
+++ b/config/examples/BIQU/B1-BLTouch/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/BIQU/B1/Configuration_adv.h b/config/examples/BIQU/B1/Configuration_adv.h
index 270937cda2..059342cadd 100644
--- a/config/examples/BIQU/B1/Configuration_adv.h
+++ b/config/examples/BIQU/B1/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/BQ/Hephestos/Configuration_adv.h b/config/examples/BQ/Hephestos/Configuration_adv.h
index 7bcc2794ab..b2f85ceec2 100644
--- a/config/examples/BQ/Hephestos/Configuration_adv.h
+++ b/config/examples/BQ/Hephestos/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/BQ/Hephestos_2/Configuration_adv.h b/config/examples/BQ/Hephestos_2/Configuration_adv.h
index 5110f17dd3..fe04d45012 100644
--- a/config/examples/BQ/Hephestos_2/Configuration_adv.h
+++ b/config/examples/BQ/Hephestos_2/Configuration_adv.h
@@ -2713,22 +2713,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/BQ/WITBOX/Configuration_adv.h b/config/examples/BQ/WITBOX/Configuration_adv.h
index 7bcc2794ab..b2f85ceec2 100644
--- a/config/examples/BQ/WITBOX/Configuration_adv.h
+++ b/config/examples/BQ/WITBOX/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Cartesio/Configuration_adv.h b/config/examples/Cartesio/Configuration_adv.h
index d89ca00c1b..60f6748b8d 100644
--- a/config/examples/Cartesio/Configuration_adv.h
+++ b/config/examples/Cartesio/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h
index ce10440348..0e410890a0 100644
--- a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h	
+++ b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h	
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h
index 0f1216fae2..6a09dd4f73 100644
--- a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h	
+++ b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h	
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h
index 5cde110892..c9df2629c0 100644
--- a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h	
+++ b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h	
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h
index 9c0b4cdc47..5902c4b902 100644
--- a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h	
+++ b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h	
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h
index 9c0b4cdc47..5902c4b902 100644
--- a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h	
+++ b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h	
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/CR-10 V2/Configuration_adv.h b/config/examples/Creality/CR-10 V2/Configuration_adv.h
index 0437d027f7..759b55395a 100644
--- a/config/examples/Creality/CR-10 V2/Configuration_adv.h	
+++ b/config/examples/Creality/CR-10 V2/Configuration_adv.h	
@@ -2708,22 +2708,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/CR-10 V3/Configuration_adv.h b/config/examples/Creality/CR-10 V3/Configuration_adv.h
index 0c648f0b01..9d11be5bca 100644
--- a/config/examples/Creality/CR-10 V3/Configuration_adv.h	
+++ b/config/examples/Creality/CR-10 V3/Configuration_adv.h	
@@ -2709,22 +2709,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h
index cf1f2f7f78..ae6555e9c9 100644
--- a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h	
+++ b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h	
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h
index 87653f5a3a..2c75a6c93c 100644
--- a/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h
+++ b/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h
index 6b5c824760..59fa4957a6 100644
--- a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h	
+++ b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h	
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h
index 9985ae0858..0735d8d4e5 100644
--- a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h	
+++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h	
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h
index 65088a32f6..6a512d29cf 100644
--- a/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h	
+++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h	
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h
index 65cd8d2183..65cce504b6 100644
--- a/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h
+++ b/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/CR-20 Pro/Configuration_adv.h b/config/examples/Creality/CR-20 Pro/Configuration_adv.h
index 40c9c30786..c7c1d65f00 100644
--- a/config/examples/Creality/CR-20 Pro/Configuration_adv.h	
+++ b/config/examples/Creality/CR-20 Pro/Configuration_adv.h	
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/CR-20/Configuration_adv.h b/config/examples/Creality/CR-20/Configuration_adv.h
index 90565b8a28..3eaccef6ea 100644
--- a/config/examples/Creality/CR-20/Configuration_adv.h
+++ b/config/examples/Creality/CR-20/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/CR-6 SE/Configuration_adv.h b/config/examples/Creality/CR-6 SE/Configuration_adv.h
index 0ba1c44499..3bfa92d4d3 100644
--- a/config/examples/Creality/CR-6 SE/Configuration_adv.h	
+++ b/config/examples/Creality/CR-6 SE/Configuration_adv.h	
@@ -2706,22 +2706,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/CR-8/Configuration_adv.h b/config/examples/Creality/CR-8/Configuration_adv.h
index 6c57c6a4cb..5c89557342 100644
--- a/config/examples/Creality/CR-8/Configuration_adv.h
+++ b/config/examples/Creality/CR-8/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/Ender-2/Configuration_adv.h b/config/examples/Creality/Ender-2/Configuration_adv.h
index 23350c313e..c3bbf86cbc 100644
--- a/config/examples/Creality/Ender-2/Configuration_adv.h
+++ b/config/examples/Creality/Ender-2/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/Ender-3 Max/Configuration_adv.h b/config/examples/Creality/Ender-3 Max/Configuration_adv.h
index 7847b901c1..7e3ccfb411 100644
--- a/config/examples/Creality/Ender-3 Max/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-3 Max/Configuration_adv.h	
@@ -2706,22 +2706,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h
index 16cc35350c..45f1e99691 100644
--- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h	
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h
index 5434b4c68d..bf88320273 100644
--- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h	
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h
index 315c89ed29..4e035cb854 100644
--- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h	
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h
index 0daaec62c7..70bf1f8546 100644
--- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h	
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h
index 7063e9d9d0..08631e853f 100644
--- a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h	
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h
index 16832801e2..6ee3566897 100644
--- a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h	
@@ -2706,22 +2706,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h
index c0903ae3c8..bc7ce1705d 100644
--- a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h	
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/Ender-3 V2/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/Configuration_adv.h
index 2ca6cb7e7e..77021f1d1b 100644
--- a/config/examples/Creality/Ender-3 V2/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-3 V2/Configuration_adv.h	
@@ -2706,22 +2706,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h
index 626dcb2972..56a3099922 100644
--- a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h	
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h
index a51e59f0fb..506de432f4 100644
--- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h	
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h
index 541df81309..95a19a058f 100644
--- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h	
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h
index a51e59f0fb..506de432f4 100644
--- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h	
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h
index e743422af8..d426379b8a 100644
--- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h	
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h
index 6b98d9c671..ea7ef020c6 100644
--- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h	
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h
index 12f030c55b..94c4ae6049 100644
--- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h	
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h
index 2cc5458ff6..438f0ad2df 100644
--- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h	
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h
index 02dbfa1fea..800cc4ba75 100644
--- a/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h
+++ b/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h
index 02dbfa1fea..800cc4ba75 100644
--- a/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h
+++ b/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h
index 365cd31e25..1b43d36762 100644
--- a/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h
+++ b/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h
index c42c215488..d055f8fb92 100644
--- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h	
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h
index c42c215488..d055f8fb92 100644
--- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h	
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h
index c42c215488..d055f8fb92 100644
--- a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h	
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h
index c42c215488..d055f8fb92 100644
--- a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h	
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h
index d480d106f3..8e92495651 100644
--- a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h
+++ b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_PRUSAMK3_24V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h b/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h
index ef8b160659..5ca77e625f 100644
--- a/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h	
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h b/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h
index ba27a3ba75..33e1c5ca1a 100644
--- a/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h	
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h
index d35ac83347..e70f48bb59 100644
--- a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h	
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/Ender-4/Configuration_adv.h b/config/examples/Creality/Ender-4/Configuration_adv.h
index 212f78bae5..39ae82f7c1 100644
--- a/config/examples/Creality/Ender-4/Configuration_adv.h
+++ b/config/examples/Creality/Ender-4/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/Ender-5 Plus/Configuration_adv.h b/config/examples/Creality/Ender-5 Plus/Configuration_adv.h
index 0022fed203..bbd7b797a1 100644
--- a/config/examples/Creality/Ender-5 Plus/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-5 Plus/Configuration_adv.h	
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h
index 62b149850c..0897e14d68 100644
--- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h	
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h
index 0e75fb638c..14b2f7aa5c 100644
--- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h	
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h
index 230eef49d1..47eb0ee3d7 100644
--- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h	
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h
index a8ef5b7653..52ebca639a 100644
--- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h	
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h
index c839769a4c..07a9f930a7 100644
--- a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h	
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h
index 77643bfec5..e4530e2525 100644
--- a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h	
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h
index c839769a4c..07a9f930a7 100644
--- a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h	
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h
index 91eb7e68eb..51c5c736fa 100644
--- a/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h	
@@ -2709,22 +2709,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h
index 62b149850c..0897e14d68 100644
--- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h	
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h
index 0e75fb638c..14b2f7aa5c 100644
--- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h	
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h
index 18ed57b84a..94c4ae6049 100644
--- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h	
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_24V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_24V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_24V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_24V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_24V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_24V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_24V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_24V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_24V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_24V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_24V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_24V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_24V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_24V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_24V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_24V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h
index edcb8adb33..f558331235 100644
--- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h	
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h
index d78caefc81..d8ad6d6bc5 100644
--- a/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h
+++ b/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h
index d78caefc81..d8ad6d6bc5 100644
--- a/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h
+++ b/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Creality/Ender-6/Configuration_adv.h b/config/examples/Creality/Ender-6/Configuration_adv.h
index 8a81833147..3b091d1a8c 100644
--- a/config/examples/Creality/Ender-6/Configuration_adv.h
+++ b/config/examples/Creality/Ender-6/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_24V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_24V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_24V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_24V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_24V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_24V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_24V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_24V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_24V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_24V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_24V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_24V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_24V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_24V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_24V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_24V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h
index e328902caf..24a1043627 100644
--- a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h	
+++ b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h	
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Daycom/3DP-100/Configuration_adv.h b/config/examples/Daycom/3DP-100/Configuration_adv.h
index 1ab48377be..7d59140389 100644
--- a/config/examples/Daycom/3DP-100/Configuration_adv.h
+++ b/config/examples/Daycom/3DP-100/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h b/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h
index f89660966c..c87eea0d28 100644
--- a/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h	
+++ b/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h	
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Einstart-S/Configuration_adv.h b/config/examples/Einstart-S/Configuration_adv.h
index 7ee746efc6..7e7b0f83fd 100644
--- a/config/examples/Einstart-S/Configuration_adv.h
+++ b/config/examples/Einstart-S/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Eryone/Thinker SE/Configuration_adv.h b/config/examples/Eryone/Thinker SE/Configuration_adv.h
index ebe38c85d9..0a73fa9206 100644
--- a/config/examples/Eryone/Thinker SE/Configuration_adv.h	
+++ b/config/examples/Eryone/Thinker SE/Configuration_adv.h	
@@ -2711,22 +2711,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Eryone/Thinker V2/Configuration_adv.h b/config/examples/Eryone/Thinker V2/Configuration_adv.h
index d814bb57f9..b6c7ecc379 100644
--- a/config/examples/Eryone/Thinker V2/Configuration_adv.h	
+++ b/config/examples/Eryone/Thinker V2/Configuration_adv.h	
@@ -2711,22 +2711,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/FYSETC/AIO_II/Configuration_adv.h b/config/examples/FYSETC/AIO_II/Configuration_adv.h
index 5c11efa066..752c5c5235 100644
--- a/config/examples/FYSETC/AIO_II/Configuration_adv.h
+++ b/config/examples/FYSETC/AIO_II/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/FYSETC/F6_13/Configuration_adv.h b/config/examples/FYSETC/F6_13/Configuration_adv.h
index f02b573397..150a091284 100644
--- a/config/examples/FYSETC/F6_13/Configuration_adv.h
+++ b/config/examples/FYSETC/F6_13/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/FYSETC/S6/Configuration_adv.h b/config/examples/FYSETC/S6/Configuration_adv.h
index d1e2fa52d2..0f740c2620 100644
--- a/config/examples/FYSETC/S6/Configuration_adv.h
+++ b/config/examples/FYSETC/S6/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Felix/DUAL/Configuration_adv.h b/config/examples/Felix/DUAL/Configuration_adv.h
index d74bea17af..51f9709f7d 100644
--- a/config/examples/Felix/DUAL/Configuration_adv.h
+++ b/config/examples/Felix/DUAL/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Felix/Single/Configuration_adv.h b/config/examples/Felix/Single/Configuration_adv.h
index d74bea17af..51f9709f7d 100644
--- a/config/examples/Felix/Single/Configuration_adv.h
+++ b/config/examples/Felix/Single/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/FlashForge/Creator 2X/Configuration_adv.h b/config/examples/FlashForge/Creator 2X/Configuration_adv.h
index cdb520235e..eae2d33994 100644
--- a/config/examples/FlashForge/Creator 2X/Configuration_adv.h	
+++ b/config/examples/FlashForge/Creator 2X/Configuration_adv.h	
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/FlashForge/CreatorPro/Configuration_adv.h b/config/examples/FlashForge/CreatorPro/Configuration_adv.h
index 2b0ef5f1f7..f6dbbdce71 100644
--- a/config/examples/FlashForge/CreatorPro/Configuration_adv.h
+++ b/config/examples/FlashForge/CreatorPro/Configuration_adv.h
@@ -2704,22 +2704,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/FlyingBear/P905H/Configuration_adv.h b/config/examples/FlyingBear/P905H/Configuration_adv.h
index 0dcc85c8cc..388031e3e2 100644
--- a/config/examples/FlyingBear/P905H/Configuration_adv.h
+++ b/config/examples/FlyingBear/P905H/Configuration_adv.h
@@ -2708,22 +2708,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/config/examples/FolgerTech/i3-2020/Configuration_adv.h
index ad7ba2d19f..fadf49c5f2 100644
--- a/config/examples/FolgerTech/i3-2020/Configuration_adv.h
+++ b/config/examples/FolgerTech/i3-2020/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Formbot/Raptor/Configuration_adv.h b/config/examples/Formbot/Raptor/Configuration_adv.h
index cbc9923ce7..7e53a705a0 100644
--- a/config/examples/Formbot/Raptor/Configuration_adv.h
+++ b/config/examples/Formbot/Raptor/Configuration_adv.h
@@ -2707,22 +2707,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
index cc8a4c12c2..dc0c5d0700 100644
--- a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
+++ b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Formbot/T_Rex_3/Configuration_adv.h b/config/examples/Formbot/T_Rex_3/Configuration_adv.h
index f075df4081..202e75743e 100644
--- a/config/examples/Formbot/T_Rex_3/Configuration_adv.h
+++ b/config/examples/Formbot/T_Rex_3/Configuration_adv.h
@@ -2709,22 +2709,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Geeetech/A10/Configuration_adv.h b/config/examples/Geeetech/A10/Configuration_adv.h
index e9fae6b2e4..388c1d4479 100644
--- a/config/examples/Geeetech/A10/Configuration_adv.h
+++ b/config/examples/Geeetech/A10/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Geeetech/A10D/Configuration_adv.h b/config/examples/Geeetech/A10D/Configuration_adv.h
index c640dbe176..73ce974cc2 100644
--- a/config/examples/Geeetech/A10D/Configuration_adv.h
+++ b/config/examples/Geeetech/A10D/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Geeetech/A10M/Configuration_adv.h b/config/examples/Geeetech/A10M/Configuration_adv.h
index a3b96148bc..00523dbb03 100644
--- a/config/examples/Geeetech/A10M/Configuration_adv.h
+++ b/config/examples/Geeetech/A10M/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Geeetech/A10PRO/Configuration_adv.h b/config/examples/Geeetech/A10PRO/Configuration_adv.h
index e9fae6b2e4..388c1d4479 100644
--- a/config/examples/Geeetech/A10PRO/Configuration_adv.h
+++ b/config/examples/Geeetech/A10PRO/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Geeetech/A10T/Configuration_adv.h b/config/examples/Geeetech/A10T/Configuration_adv.h
index a3b96148bc..00523dbb03 100644
--- a/config/examples/Geeetech/A10T/Configuration_adv.h
+++ b/config/examples/Geeetech/A10T/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Geeetech/A20/Configuration_adv.h b/config/examples/Geeetech/A20/Configuration_adv.h
index b07c90ddba..ae92367911 100644
--- a/config/examples/Geeetech/A20/Configuration_adv.h
+++ b/config/examples/Geeetech/A20/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Geeetech/A20M/Configuration_adv.h b/config/examples/Geeetech/A20M/Configuration_adv.h
index b07c90ddba..ae92367911 100644
--- a/config/examples/Geeetech/A20M/Configuration_adv.h
+++ b/config/examples/Geeetech/A20M/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Geeetech/A20T/Configuration_adv.h b/config/examples/Geeetech/A20T/Configuration_adv.h
index b07c90ddba..ae92367911 100644
--- a/config/examples/Geeetech/A20T/Configuration_adv.h
+++ b/config/examples/Geeetech/A20T/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Geeetech/A30/Configuration_adv.h b/config/examples/Geeetech/A30/Configuration_adv.h
index 772d69216d..d460d14bd2 100644
--- a/config/examples/Geeetech/A30/Configuration_adv.h
+++ b/config/examples/Geeetech/A30/Configuration_adv.h
@@ -2704,22 +2704,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Geeetech/A30M/Configuration_adv.h b/config/examples/Geeetech/A30M/Configuration_adv.h
index 772d69216d..d460d14bd2 100644
--- a/config/examples/Geeetech/A30M/Configuration_adv.h
+++ b/config/examples/Geeetech/A30M/Configuration_adv.h
@@ -2704,22 +2704,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Geeetech/A30T/Configuration_adv.h b/config/examples/Geeetech/A30T/Configuration_adv.h
index 772d69216d..d460d14bd2 100644
--- a/config/examples/Geeetech/A30T/Configuration_adv.h
+++ b/config/examples/Geeetech/A30T/Configuration_adv.h
@@ -2704,22 +2704,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Geeetech/D200/Configuration_adv.h b/config/examples/Geeetech/D200/Configuration_adv.h
index 3d44858e3a..a0dd7a8a03 100644
--- a/config/examples/Geeetech/D200/Configuration_adv.h
+++ b/config/examples/Geeetech/D200/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Geeetech/Duplicator5/Configuration_adv.h b/config/examples/Geeetech/Duplicator5/Configuration_adv.h
index d1e2fa52d2..0f740c2620 100644
--- a/config/examples/Geeetech/Duplicator5/Configuration_adv.h
+++ b/config/examples/Geeetech/Duplicator5/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Geeetech/E180/Configuration_adv.h b/config/examples/Geeetech/E180/Configuration_adv.h
index 772d69216d..d460d14bd2 100644
--- a/config/examples/Geeetech/E180/Configuration_adv.h
+++ b/config/examples/Geeetech/E180/Configuration_adv.h
@@ -2704,22 +2704,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Geeetech/M201/Configuration_adv.h b/config/examples/Geeetech/M201/Configuration_adv.h
index 3d44858e3a..a0dd7a8a03 100644
--- a/config/examples/Geeetech/M201/Configuration_adv.h
+++ b/config/examples/Geeetech/M201/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Geeetech/MeCreator2/Configuration_adv.h b/config/examples/Geeetech/MeCreator2/Configuration_adv.h
index 4b15df0f27..803416ce32 100644
--- a/config/examples/Geeetech/MeCreator2/Configuration_adv.h
+++ b/config/examples/Geeetech/MeCreator2/Configuration_adv.h
@@ -2704,22 +2704,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Geeetech/Me_creator/Configuration_adv.h b/config/examples/Geeetech/Me_creator/Configuration_adv.h
index d1e2fa52d2..0f740c2620 100644
--- a/config/examples/Geeetech/Me_creator/Configuration_adv.h
+++ b/config/examples/Geeetech/Me_creator/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Geeetech/Me_ducer/Configuration_adv.h b/config/examples/Geeetech/Me_ducer/Configuration_adv.h
index eca36dddf9..af36ed445b 100644
--- a/config/examples/Geeetech/Me_ducer/Configuration_adv.h
+++ b/config/examples/Geeetech/Me_ducer/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Geeetech/PI3A PRO/Configuration_adv.h b/config/examples/Geeetech/PI3A PRO/Configuration_adv.h
index 0dfdfbe216..54990f842d 100644
--- a/config/examples/Geeetech/PI3A PRO/Configuration_adv.h	
+++ b/config/examples/Geeetech/PI3A PRO/Configuration_adv.h	
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h
index e9fae6b2e4..388c1d4479 100644
--- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h	
+++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h	
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h
index e9fae6b2e4..388c1d4479 100644
--- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h	
+++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h	
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/HMS434/Configuration_adv.h b/config/examples/HMS434/Configuration_adv.h
index cae2e3d7df..44458709ac 100644
--- a/config/examples/HMS434/Configuration_adv.h
+++ b/config/examples/HMS434/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Infitary/i3-M508/Configuration_adv.h b/config/examples/Infitary/i3-M508/Configuration_adv.h
index e2f516d30b..dfb416e33b 100644
--- a/config/examples/Infitary/i3-M508/Configuration_adv.h
+++ b/config/examples/Infitary/i3-M508/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h b/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h
index 22172e04c0..a28041bc64 100644
--- a/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h	
+++ b/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h	
@@ -2704,22 +2704,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/JGAurora/A1/Configuration_adv.h b/config/examples/JGAurora/A1/Configuration_adv.h
index 7ebb4f43fc..2934f20c9f 100644
--- a/config/examples/JGAurora/A1/Configuration_adv.h
+++ b/config/examples/JGAurora/A1/Configuration_adv.h
@@ -2710,22 +2710,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/JGAurora/A5/Configuration_adv.h b/config/examples/JGAurora/A5/Configuration_adv.h
index b61b0b0b4e..9d2f9c4a79 100644
--- a/config/examples/JGAurora/A5/Configuration_adv.h
+++ b/config/examples/JGAurora/A5/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/JGAurora/A5S/Configuration_adv.h b/config/examples/JGAurora/A5S/Configuration_adv.h
index 7ebb4f43fc..2934f20c9f 100644
--- a/config/examples/JGAurora/A5S/Configuration_adv.h
+++ b/config/examples/JGAurora/A5S/Configuration_adv.h
@@ -2710,22 +2710,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/JGAurora/Magic/Configuration_adv.h b/config/examples/JGAurora/Magic/Configuration_adv.h
index 2c4b0a877e..936e165a4b 100644
--- a/config/examples/JGAurora/Magic/Configuration_adv.h
+++ b/config/examples/JGAurora/Magic/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Kingroon/KP3/Configuration_adv.h b/config/examples/Kingroon/KP3/Configuration_adv.h
index d9b6022564..9324ebf75c 100644
--- a/config/examples/Kingroon/KP3/Configuration_adv.h
+++ b/config/examples/Kingroon/KP3/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Labists/ET4/Configuration_adv.h b/config/examples/Labists/ET4/Configuration_adv.h
index 82ff4ee101..8e05800e90 100644
--- a/config/examples/Labists/ET4/Configuration_adv.h
+++ b/config/examples/Labists/ET4/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_24V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_24V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_24V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_24V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_24V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_24V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_24V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_24V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_24V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_24V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_24V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_24V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_24V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_24V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_24V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_24V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/MBot/Cube/Configuration_adv.h b/config/examples/MBot/Cube/Configuration_adv.h
index 929355ae0f..6e281d165f 100644
--- a/config/examples/MBot/Cube/Configuration_adv.h
+++ b/config/examples/MBot/Cube/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h b/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h
index 7a78dabde5..d8e5703feb 100644
--- a/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h	
+++ b/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h	
@@ -2699,22 +2699,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/MakerParts/Configuration_adv.h b/config/examples/MakerParts/Configuration_adv.h
index c3a9c96f9b..d8c9140d2d 100644
--- a/config/examples/MakerParts/Configuration_adv.h
+++ b/config/examples/MakerParts/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Malyan/M150/Configuration_adv.h b/config/examples/Malyan/M150/Configuration_adv.h
index 8d06cd96ed..e09149c9ae 100644
--- a/config/examples/Malyan/M150/Configuration_adv.h
+++ b/config/examples/Malyan/M150/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Malyan/M200/Configuration_adv.h b/config/examples/Malyan/M200/Configuration_adv.h
index 94bfc1ddcc..7ca61037b7 100644
--- a/config/examples/Malyan/M200/Configuration_adv.h
+++ b/config/examples/Malyan/M200/Configuration_adv.h
@@ -2707,22 +2707,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/config/examples/Micromake/C1/enhanced/Configuration_adv.h
index 61a12fc023..87187a8206 100644
--- a/config/examples/Micromake/C1/enhanced/Configuration_adv.h
+++ b/config/examples/Micromake/C1/enhanced/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Mks/Robin/Configuration_adv.h b/config/examples/Mks/Robin/Configuration_adv.h
index db6417c7b8..37130350d9 100644
--- a/config/examples/Mks/Robin/Configuration_adv.h
+++ b/config/examples/Mks/Robin/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Mks/Sbase/Configuration_adv.h b/config/examples/Mks/Sbase/Configuration_adv.h
index 7675540a24..2e0e62a6b9 100644
--- a/config/examples/Mks/Sbase/Configuration_adv.h
+++ b/config/examples/Mks/Sbase/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Modix/Big60/Configuration_adv.h b/config/examples/Modix/Big60/Configuration_adv.h
index 1e6b0733aa..20d161ce9f 100644
--- a/config/examples/Modix/Big60/Configuration_adv.h
+++ b/config/examples/Modix/Big60/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Nextion/Configuration_adv.h b/config/examples/Nextion/Configuration_adv.h
index 88d0de999f..c5f2e51025 100644
--- a/config/examples/Nextion/Configuration_adv.h
+++ b/config/examples/Nextion/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Ortur 4/Configuration_adv.h b/config/examples/Ortur 4/Configuration_adv.h
index 6654ed74ee..59ba5f828d 100644
--- a/config/examples/Ortur 4/Configuration_adv.h	
+++ b/config/examples/Ortur 4/Configuration_adv.h	
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Prusa/MK3/Configuration_adv.h b/config/examples/Prusa/MK3/Configuration_adv.h
index b367a0cce3..3afc536809 100644
--- a/config/examples/Prusa/MK3/Configuration_adv.h
+++ b/config/examples/Prusa/MK3/Configuration_adv.h
@@ -2686,22 +2686,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_PRUSAMK3_24V       // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h
index db9aeff4d4..c129151bad 100644
--- a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h
+++ b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Qidi/Qidi 1/Configuration_adv.h b/config/examples/Qidi/Qidi 1/Configuration_adv.h
index 7fe48755fd..225592bb1e 100644
--- a/config/examples/Qidi/Qidi 1/Configuration_adv.h	
+++ b/config/examples/Qidi/Qidi 1/Configuration_adv.h	
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Raiscube/A8r/Configuration_adv.h b/config/examples/Raiscube/A8r/Configuration_adv.h
index 54a68b31de..82fdfc5790 100644
--- a/config/examples/Raiscube/A8r/Configuration_adv.h
+++ b/config/examples/Raiscube/A8r/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/RapideLite/RL200/Configuration_adv.h b/config/examples/RapideLite/RL200/Configuration_adv.h
index 750e7d1f9a..7fe0064fbb 100644
--- a/config/examples/RapideLite/RL200/Configuration_adv.h
+++ b/config/examples/RapideLite/RL200/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Renkforce/RF100/Configuration_adv.h b/config/examples/Renkforce/RF100/Configuration_adv.h
index 4bcc261c03..1ddcafec70 100644
--- a/config/examples/Renkforce/RF100/Configuration_adv.h
+++ b/config/examples/Renkforce/RF100/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Renkforce/RF100XL/Configuration_adv.h b/config/examples/Renkforce/RF100XL/Configuration_adv.h
index 4bcc261c03..1ddcafec70 100644
--- a/config/examples/Renkforce/RF100XL/Configuration_adv.h
+++ b/config/examples/Renkforce/RF100XL/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Renkforce/RF100v2/Configuration_adv.h b/config/examples/Renkforce/RF100v2/Configuration_adv.h
index 4bcc261c03..1ddcafec70 100644
--- a/config/examples/Renkforce/RF100v2/Configuration_adv.h
+++ b/config/examples/Renkforce/RF100v2/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/RigidBot/Configuration_adv.h b/config/examples/RigidBot/Configuration_adv.h
index e61e8f487f..b4e56f6806 100644
--- a/config/examples/RigidBot/Configuration_adv.h
+++ b/config/examples/RigidBot/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/SCARA/MP_SCARA/Configuration_adv.h b/config/examples/SCARA/MP_SCARA/Configuration_adv.h
index 0d44470fc5..bbc612d8e7 100644
--- a/config/examples/SCARA/MP_SCARA/Configuration_adv.h
+++ b/config/examples/SCARA/MP_SCARA/Configuration_adv.h
@@ -2702,22 +2702,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/SCARA/Morgan/Configuration_adv.h b/config/examples/SCARA/Morgan/Configuration_adv.h
index 2ad6fd25c6..98b5c26f1d 100644
--- a/config/examples/SCARA/Morgan/Configuration_adv.h
+++ b/config/examples/SCARA/Morgan/Configuration_adv.h
@@ -2702,22 +2702,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h
index 75f7c2b0e0..5e25029014 100644
--- a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h
+++ b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Sanguinololu/Configuration_adv.h b/config/examples/Sanguinololu/Configuration_adv.h
index 32beefabf9..c9f673eb2c 100644
--- a/config/examples/Sanguinololu/Configuration_adv.h
+++ b/config/examples/Sanguinololu/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h b/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h
index 8721453da3..904965f160 100644
--- a/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h
+++ b/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h
@@ -2703,22 +2703,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h b/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h
index 2d4a276774..3d1b931037 100644
--- a/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h
+++ b/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h
@@ -2703,22 +2703,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h b/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h
index 5da502eabc..c5d46fb4d2 100644
--- a/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h
+++ b/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Tevo/Michelangelo/Configuration_adv.h b/config/examples/Tevo/Michelangelo/Configuration_adv.h
index 50521d8b9f..185787d62a 100644
--- a/config/examples/Tevo/Michelangelo/Configuration_adv.h
+++ b/config/examples/Tevo/Michelangelo/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Tevo/Nereus/Configuration_adv.h b/config/examples/Tevo/Nereus/Configuration_adv.h
index fbb9eb240e..fdef2c8fc1 100644
--- a/config/examples/Tevo/Nereus/Configuration_adv.h
+++ b/config/examples/Tevo/Nereus/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Tevo/Tarantula Pro/Configuration_adv.h b/config/examples/Tevo/Tarantula Pro/Configuration_adv.h
index 33c215eb10..4f5b8af649 100644
--- a/config/examples/Tevo/Tarantula Pro/Configuration_adv.h	
+++ b/config/examples/Tevo/Tarantula Pro/Configuration_adv.h	
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h
index 02f5b2f91c..e9178e5876 100644
--- a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h	
+++ b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h	
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h
index 02f5b2f91c..e9178e5876 100644
--- a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h	
+++ b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h	
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/TheBorg/Configuration_adv.h b/config/examples/TheBorg/Configuration_adv.h
index 41ad59a475..96a94c14d0 100644
--- a/config/examples/TheBorg/Configuration_adv.h
+++ b/config/examples/TheBorg/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/TinyBoy2/Configuration_adv.h b/config/examples/TinyBoy2/Configuration_adv.h
index 4b36c10c51..37221f59c2 100644
--- a/config/examples/TinyBoy2/Configuration_adv.h
+++ b/config/examples/TinyBoy2/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Tronxy/X3A/Configuration_adv.h b/config/examples/Tronxy/X3A/Configuration_adv.h
index 8b8f1c467c..a96aea5681 100644
--- a/config/examples/Tronxy/X3A/Configuration_adv.h
+++ b/config/examples/Tronxy/X3A/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Tronxy/X5S-2E/Configuration_adv.h b/config/examples/Tronxy/X5S-2E/Configuration_adv.h
index 2d8da847e2..a021282ead 100644
--- a/config/examples/Tronxy/X5S-2E/Configuration_adv.h
+++ b/config/examples/Tronxy/X5S-2E/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Tronxy/X5SA/Configuration_adv.h b/config/examples/Tronxy/X5SA/Configuration_adv.h
index f122d9b444..abdee434ac 100644
--- a/config/examples/Tronxy/X5SA/Configuration_adv.h
+++ b/config/examples/Tronxy/X5SA/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Two Trees/BlueR Plus/Configuration_adv.h b/config/examples/Two Trees/BlueR Plus/Configuration_adv.h
index 1045c7ae10..1f66a76146 100644
--- a/config/examples/Two Trees/BlueR Plus/Configuration_adv.h	
+++ b/config/examples/Two Trees/BlueR Plus/Configuration_adv.h	
@@ -2706,22 +2706,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_24V       // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h b/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h
index fae8d20eb0..1509848790 100644
--- a/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h	
+++ b/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h	
@@ -2707,22 +2707,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_24V       // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h b/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h
index fae8d20eb0..1509848790 100644
--- a/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h	
+++ b/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h	
@@ -2707,22 +2707,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_24V       // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h b/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h
index fae8d20eb0..1509848790 100644
--- a/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h	
+++ b/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h	
@@ -2707,22 +2707,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_24V       // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h
index bf4712744d..5f83b8dfec 100644
--- a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h	
+++ b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h	
@@ -2712,22 +2712,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h b/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h
index 4a0157a08c..37478aa912 100644
--- a/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h	
+++ b/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h	
@@ -2706,23 +2706,23 @@
    * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/UltiMachine/Archim1/Configuration_adv.h b/config/examples/UltiMachine/Archim1/Configuration_adv.h
index 50a2814df1..bcda584b9e 100644
--- a/config/examples/UltiMachine/Archim1/Configuration_adv.h
+++ b/config/examples/UltiMachine/Archim1/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/UltiMachine/Archim2/Configuration_adv.h b/config/examples/UltiMachine/Archim2/Configuration_adv.h
index c5629f0808..7cfa141573 100644
--- a/config/examples/UltiMachine/Archim2/Configuration_adv.h
+++ b/config/examples/UltiMachine/Archim2/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/VORONDesign/Configuration_adv.h b/config/examples/VORONDesign/Configuration_adv.h
index d77fc16c80..cea9e0c2d5 100644
--- a/config/examples/VORONDesign/Configuration_adv.h
+++ b/config/examples/VORONDesign/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Velleman/K8200/Configuration_adv.h b/config/examples/Velleman/K8200/Configuration_adv.h
index 55d2a6b16d..384afc8546 100644
--- a/config/examples/Velleman/K8200/Configuration_adv.h
+++ b/config/examples/Velleman/K8200/Configuration_adv.h
@@ -2718,22 +2718,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h b/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h
index 316fdaff36..1f6f3f8bd4 100644
--- a/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h
+++ b/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Velleman/K8400/Single-head/Configuration_adv.h b/config/examples/Velleman/K8400/Single-head/Configuration_adv.h
index 316fdaff36..1f6f3f8bd4 100644
--- a/config/examples/Velleman/K8400/Single-head/Configuration_adv.h
+++ b/config/examples/Velleman/K8400/Single-head/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/WASP/PowerWASP/Configuration_adv.h b/config/examples/WASP/PowerWASP/Configuration_adv.h
index 5ab540e675..cbeeccd9b3 100644
--- a/config/examples/WASP/PowerWASP/Configuration_adv.h
+++ b/config/examples/WASP/PowerWASP/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h b/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h
index 90434344d8..2ffa9f810f 100644
--- a/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h	
+++ b/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h	
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h
index 740e9b98b3..ad60a3e2c2 100644
--- a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h	
+++ b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h	
@@ -2707,22 +2707,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h
index 24892cd718..6681b5bba4 100644
--- a/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h	
+++ b/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h	
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h
index ffc0338e39..ddd6920c4f 100644
--- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h	
+++ b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h	
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Weistek/wt150/Configuration_adv.h b/config/examples/Weistek/wt150/Configuration_adv.h
index b5c798a8d4..cd0c12a73d 100644
--- a/config/examples/Weistek/wt150/Configuration_adv.h
+++ b/config/examples/Weistek/wt150/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Zonestar/P802M/Configuration_adv.h b/config/examples/Zonestar/P802M/Configuration_adv.h
index 45445cebc2..399ae277b2 100644
--- a/config/examples/Zonestar/P802M/Configuration_adv.h
+++ b/config/examples/Zonestar/P802M/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h
index 3e89513383..a9da8f6d90 100755
--- a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h	
+++ b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h	
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h
index a3a332d22b..fafdbfd6b8 100644
--- a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h	
+++ b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h	
@@ -2708,22 +2708,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h
index 48bbfe63f0..a32a838035 100644
--- a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h
+++ b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h
@@ -2707,22 +2707,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/delta/Anycubic/Predator/Configuration_adv.h b/config/examples/delta/Anycubic/Predator/Configuration_adv.h
index eb70726b33..0abae0da12 100644
--- a/config/examples/delta/Anycubic/Predator/Configuration_adv.h
+++ b/config/examples/delta/Anycubic/Predator/Configuration_adv.h
@@ -2708,22 +2708,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h
index fad2ce7d38..38d4fc5a73 100644
--- a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h
+++ b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h
@@ -2707,22 +2707,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h
index fad2ce7d38..38d4fc5a73 100644
--- a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h
+++ b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h
@@ -2707,22 +2707,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h
index 5d34cbccba..8b1014cdcf 100644
--- a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h
+++ b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h
@@ -2707,22 +2707,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h b/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h
index ddb6732284..dd9b98b530 100644
--- a/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h
+++ b/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h
@@ -2707,22 +2707,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h b/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h
index 2f1c955198..f0b14a626c 100644
--- a/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h
+++ b/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h
@@ -2708,22 +2708,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
index 5f228f2c1a..a5aaba6777 100644
--- a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
+++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
@@ -2707,22 +2707,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/delta/FLSUN/kossel/Configuration_adv.h b/config/examples/delta/FLSUN/kossel/Configuration_adv.h
index 5f228f2c1a..a5aaba6777 100644
--- a/config/examples/delta/FLSUN/kossel/Configuration_adv.h
+++ b/config/examples/delta/FLSUN/kossel/Configuration_adv.h
@@ -2707,22 +2707,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
index 7339a92d21..23fcef9535 100644
--- a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
+++ b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
@@ -2707,22 +2707,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/delta/Geeetech/G2/Configuration_adv.h b/config/examples/delta/Geeetech/G2/Configuration_adv.h
index 2b65d2b5f1..045a919c1a 100644
--- a/config/examples/delta/Geeetech/G2/Configuration_adv.h
+++ b/config/examples/delta/Geeetech/G2/Configuration_adv.h
@@ -2707,22 +2707,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h b/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h
index f524cbd85e..0c9e8bddba 100644
--- a/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h
+++ b/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h
@@ -2707,22 +2707,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/delta/Geeetech/G2S/Configuration_adv.h b/config/examples/delta/Geeetech/G2S/Configuration_adv.h
index f524cbd85e..0c9e8bddba 100644
--- a/config/examples/delta/Geeetech/G2S/Configuration_adv.h
+++ b/config/examples/delta/Geeetech/G2S/Configuration_adv.h
@@ -2707,22 +2707,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h b/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h
index f524cbd85e..0c9e8bddba 100644
--- a/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h
+++ b/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h
@@ -2707,22 +2707,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h
index 656a1634b6..a5214781e3 100644
--- a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h	
+++ b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h	
@@ -2707,22 +2707,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h b/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h
index a0d25c0bac..6ad7729c5b 100644
--- a/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h
+++ b/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h
@@ -2707,22 +2707,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/delta/MKS/SBASE/Configuration_adv.h b/config/examples/delta/MKS/SBASE/Configuration_adv.h
index ea4d46151e..8e78e4bcec 100644
--- a/config/examples/delta/MKS/SBASE/Configuration_adv.h
+++ b/config/examples/delta/MKS/SBASE/Configuration_adv.h
@@ -2707,22 +2707,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/delta/Malyan M300/Configuration_adv.h b/config/examples/delta/Malyan M300/Configuration_adv.h
index b9ef915c5d..8f781a6e5f 100644
--- a/config/examples/delta/Malyan M300/Configuration_adv.h	
+++ b/config/examples/delta/Malyan M300/Configuration_adv.h	
@@ -2707,22 +2707,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/delta/Tevo Little Monster/Configuration_adv.h b/config/examples/delta/Tevo Little Monster/Configuration_adv.h
index e7dadf4d6c..a8a23535a6 100644
--- a/config/examples/delta/Tevo Little Monster/Configuration_adv.h	
+++ b/config/examples/delta/Tevo Little Monster/Configuration_adv.h	
@@ -2707,22 +2707,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/delta/generic/Configuration_adv.h b/config/examples/delta/generic/Configuration_adv.h
index 7339a92d21..23fcef9535 100644
--- a/config/examples/delta/generic/Configuration_adv.h
+++ b/config/examples/delta/generic/Configuration_adv.h
@@ -2707,22 +2707,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/delta/kossel_clear/Configuration_adv.h b/config/examples/delta/kossel_clear/Configuration_adv.h
index 61b75a145a..0af3cb6ea7 100644
--- a/config/examples/delta/kossel_clear/Configuration_adv.h
+++ b/config/examples/delta/kossel_clear/Configuration_adv.h
@@ -2707,22 +2707,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/delta/kossel_xl/Configuration_adv.h b/config/examples/delta/kossel_xl/Configuration_adv.h
index a47794adcd..cf11ae98d8 100644
--- a/config/examples/delta/kossel_xl/Configuration_adv.h
+++ b/config/examples/delta/kossel_xl/Configuration_adv.h
@@ -2707,22 +2707,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/config/examples/gCreate/gMax1.5+/Configuration_adv.h
index d1e1d8b916..dd7fed9bd8 100644
--- a/config/examples/gCreate/gMax1.5+/Configuration_adv.h
+++ b/config/examples/gCreate/gMax1.5+/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/makibox/Configuration_adv.h b/config/examples/makibox/Configuration_adv.h
index 68ba472b49..35f2a1776a 100644
--- a/config/examples/makibox/Configuration_adv.h
+++ b/config/examples/makibox/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers
diff --git a/config/examples/tvrrug/Round2/Configuration_adv.h b/config/examples/tvrrug/Round2/Configuration_adv.h
index a0915d4e91..87e605886b 100644
--- a/config/examples/tvrrug/Round2/Configuration_adv.h
+++ b/config/examples/tvrrug/Round2/Configuration_adv.h
@@ -2705,22 +2705,22 @@
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
-  //#define CHOPPER_TIMING_X  CHOPPER_DEFAULT_12V   // For X Axes (override below)
-  //#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_12V   // For Y Axes (override below)
-  //#define CHOPPER_TIMING_Y2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z  CHOPPER_DEFAULT_12V   // For Z Axes (override below)
-  //#define CHOPPER_TIMING_Z2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_Z4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E  CHOPPER_DEFAULT_12V   // For Extruders (override below)
-  //#define CHOPPER_TIMING_E1 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E2 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E3 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E4 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E5 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E6 CHOPPER_DEFAULT_12V
-  //#define CHOPPER_TIMING_E7 CHOPPER_DEFAULT_12V
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
+  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
+  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E4 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E5 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
+  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
 
   /**
    * Monitor Trinamic drivers