diff --git a/config/default/Configuration_adv.h b/config/default/Configuration_adv.h index cf2e9da555..4ecb3df050 100644 --- a/config/default/Configuration_adv.h +++ b/config/default/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h index 6293e9ba3c..4f6f035e47 100644 --- a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h +++ b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h index 4f820ce9fb..75f302aa9f 100644 --- a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h +++ b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h index 4721ce7f01..4c63ae0a9b 100644 --- a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h +++ b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h index 2f783c7437..ff6f238292 100644 --- a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h +++ b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h @@ -1323,7 +1323,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Alfawise/U20/Configuration_adv.h b/config/examples/Alfawise/U20/Configuration_adv.h index ae4b34b75f..938cc60842 100644 --- a/config/examples/Alfawise/U20/Configuration_adv.h +++ b/config/examples/Alfawise/U20/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/AliExpress/UM2pExt/Configuration_adv.h b/config/examples/AliExpress/UM2pExt/Configuration_adv.h index 8d0327f926..05be5f823c 100644 --- a/config/examples/AliExpress/UM2pExt/Configuration_adv.h +++ b/config/examples/AliExpress/UM2pExt/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Anet/A2/Configuration_adv.h b/config/examples/Anet/A2/Configuration_adv.h index 728f1dde38..7c13e3c8d7 100644 --- a/config/examples/Anet/A2/Configuration_adv.h +++ b/config/examples/Anet/A2/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Anet/A2plus/Configuration_adv.h b/config/examples/Anet/A2plus/Configuration_adv.h index 728f1dde38..7c13e3c8d7 100644 --- a/config/examples/Anet/A2plus/Configuration_adv.h +++ b/config/examples/Anet/A2plus/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Anet/A6/Configuration_adv.h b/config/examples/Anet/A6/Configuration_adv.h index 4ee0cbabfb..c184c21482 100644 --- a/config/examples/Anet/A6/Configuration_adv.h +++ b/config/examples/Anet/A6/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Anet/A8/Configuration_adv.h b/config/examples/Anet/A8/Configuration_adv.h index 301c736b47..6e998a23a9 100644 --- a/config/examples/Anet/A8/Configuration_adv.h +++ b/config/examples/Anet/A8/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Anet/A8plus/Configuration_adv.h b/config/examples/Anet/A8plus/Configuration_adv.h index f532e8721f..e4a1b6a51a 100644 --- a/config/examples/Anet/A8plus/Configuration_adv.h +++ b/config/examples/Anet/A8plus/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Anet/A9/Configuration_adv.h b/config/examples/Anet/A9/Configuration_adv.h index 5400a35ad7..48ab2810a1 100644 --- a/config/examples/Anet/A9/Configuration_adv.h +++ b/config/examples/Anet/A9/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Anet/E10/Configuration_adv.h b/config/examples/Anet/E10/Configuration_adv.h index 79ac7b3fcf..2b6d72c8e0 100644 --- a/config/examples/Anet/E10/Configuration_adv.h +++ b/config/examples/Anet/E10/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h b/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h index 446832fbd3..0889cd23f0 100644 --- a/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h +++ b/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Anet/E16/Stock/Configuration_adv.h b/config/examples/Anet/E16/Stock/Configuration_adv.h index 5d950c7af2..fdf460bd51 100644 --- a/config/examples/Anet/E16/Stock/Configuration_adv.h +++ b/config/examples/Anet/E16/Stock/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Anet/ET4+/Configuration_adv.h b/config/examples/Anet/ET4+/Configuration_adv.h index 719f4d007a..40b4b50319 100644 --- a/config/examples/Anet/ET4+/Configuration_adv.h +++ b/config/examples/Anet/ET4+/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Anet/ET4-Pro/Configuration_adv.h b/config/examples/Anet/ET4-Pro/Configuration_adv.h index 719f4d007a..40b4b50319 100644 --- a/config/examples/Anet/ET4-Pro/Configuration_adv.h +++ b/config/examples/Anet/ET4-Pro/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Anet/ET4/Configuration_adv.h b/config/examples/Anet/ET4/Configuration_adv.h index 3810ea3f76..12b2bd0242 100644 --- a/config/examples/Anet/ET4/Configuration_adv.h +++ b/config/examples/Anet/ET4/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Anet/ET4X/Configuration_adv.h b/config/examples/Anet/ET4X/Configuration_adv.h index 3810ea3f76..12b2bd0242 100644 --- a/config/examples/Anet/ET4X/Configuration_adv.h +++ b/config/examples/Anet/ET4X/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Anet/ET5-Pro/Configuration_adv.h b/config/examples/Anet/ET5-Pro/Configuration_adv.h index 0687ee2cfb..079fa58953 100644 --- a/config/examples/Anet/ET5-Pro/Configuration_adv.h +++ b/config/examples/Anet/ET5-Pro/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Anet/ET5/Configuration_adv.h b/config/examples/Anet/ET5/Configuration_adv.h index 0687ee2cfb..079fa58953 100644 --- a/config/examples/Anet/ET5/Configuration_adv.h +++ b/config/examples/Anet/ET5/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Anet/ET5X/Configuration_adv.h b/config/examples/Anet/ET5X/Configuration_adv.h index 0687ee2cfb..079fa58953 100644 --- a/config/examples/Anet/ET5X/Configuration_adv.h +++ b/config/examples/Anet/ET5X/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/AnyCubic/Chiron/Configuration_adv.h b/config/examples/AnyCubic/Chiron/Configuration_adv.h index 99045dff20..41ac53e343 100644 --- a/config/examples/AnyCubic/Chiron/Configuration_adv.h +++ b/config/examples/AnyCubic/Chiron/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h index 431945303f..d2cec115ac 100644 --- a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h +++ b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h index 14b8f0605d..b34b03b434 100644 --- a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h +++ b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h index 1dba77a75e..5d1c600ff6 100644 --- a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h +++ b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/AnyCubic/i3 Mega/Configuration_adv.h b/config/examples/AnyCubic/i3 Mega/Configuration_adv.h index 654a578708..3cb8e0fcbe 100644 --- a/config/examples/AnyCubic/i3 Mega/Configuration_adv.h +++ b/config/examples/AnyCubic/i3 Mega/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/AnyCubic/i3/Configuration_adv.h b/config/examples/AnyCubic/i3/Configuration_adv.h index df5803deca..bfb8b28486 100644 --- a/config/examples/AnyCubic/i3/Configuration_adv.h +++ b/config/examples/AnyCubic/i3/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/ArmEd/Configuration_adv.h b/config/examples/ArmEd/Configuration_adv.h index 4d7d25f91c..6aafeeee8a 100644 --- a/config/examples/ArmEd/Configuration_adv.h +++ b/config/examples/ArmEd/Configuration_adv.h @@ -1318,7 +1318,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Artillery/Genius Pro/Configuration_adv.h b/config/examples/Artillery/Genius Pro/Configuration_adv.h index 7c64908891..1f3d3959e8 100644 --- a/config/examples/Artillery/Genius Pro/Configuration_adv.h +++ b/config/examples/Artillery/Genius Pro/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Artillery/Genius/BLTouch/Configuration_adv.h b/config/examples/Artillery/Genius/BLTouch/Configuration_adv.h index 207b662ae8..0da8a151eb 100644 --- a/config/examples/Artillery/Genius/BLTouch/Configuration_adv.h +++ b/config/examples/Artillery/Genius/BLTouch/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Artillery/Genius/V1/Configuration_adv.h b/config/examples/Artillery/Genius/V1/Configuration_adv.h index a3edd6a8a9..164c59e319 100644 --- a/config/examples/Artillery/Genius/V1/Configuration_adv.h +++ b/config/examples/Artillery/Genius/V1/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Artillery/Hornet/Configuration_adv.h b/config/examples/Artillery/Hornet/Configuration_adv.h index 5b29fb0a8c..d190605679 100644 --- a/config/examples/Artillery/Hornet/Configuration_adv.h +++ b/config/examples/Artillery/Hornet/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h b/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h index 6a337f45fa..ecfda6f6ef 100644 --- a/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h +++ b/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h b/config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h index a3edd6a8a9..164c59e319 100644 --- a/config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h +++ b/config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Artillery/Sidewinder X2/Configuration_adv.h b/config/examples/Artillery/Sidewinder X2/Configuration_adv.h index d24708a9df..f73f8750cf 100644 --- a/config/examples/Artillery/Sidewinder X2/Configuration_adv.h +++ b/config/examples/Artillery/Sidewinder X2/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Azteeg/X5GT/Configuration_adv.h b/config/examples/Azteeg/X5GT/Configuration_adv.h index cf2e9da555..4ecb3df050 100644 --- a/config/examples/Azteeg/X5GT/Configuration_adv.h +++ b/config/examples/Azteeg/X5GT/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h index 6ca93fd332..8e6778e87b 100644 --- a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/BIBO/TouchX/default/Configuration_adv.h b/config/examples/BIBO/TouchX/default/Configuration_adv.h index c4697f0343..5b4778b284 100644 --- a/config/examples/BIBO/TouchX/default/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/default/Configuration_adv.h @@ -1307,7 +1307,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/BIQU/B1 - SKR 1.4/Configuration_adv.h b/config/examples/BIQU/B1 - SKR 1.4/Configuration_adv.h index 3cd409875b..0f5e8a0f9a 100644 --- a/config/examples/BIQU/B1 - SKR 1.4/Configuration_adv.h +++ b/config/examples/BIQU/B1 - SKR 1.4/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/BIQU/B1 - SKR 2/Configuration_adv.h b/config/examples/BIQU/B1 - SKR 2/Configuration_adv.h index 6b5c997478..0089eed38a 100644 --- a/config/examples/BIQU/B1 - SKR 2/Configuration_adv.h +++ b/config/examples/BIQU/B1 - SKR 2/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/BIQU/B1 SE Plus/Configuration_adv.h b/config/examples/BIQU/B1 SE Plus/Configuration_adv.h index 44321a95d9..502697a87a 100644 --- a/config/examples/BIQU/B1 SE Plus/Configuration_adv.h +++ b/config/examples/BIQU/B1 SE Plus/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/BIQU/BX/Configuration_adv.h b/config/examples/BIQU/BX/Configuration_adv.h index 604182b019..c1991a115d 100644 --- a/config/examples/BIQU/BX/Configuration_adv.h +++ b/config/examples/BIQU/BX/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/BQ/Hephestos/Configuration_adv.h b/config/examples/BQ/Hephestos/Configuration_adv.h index e79c639d2b..d9e339f546 100644 --- a/config/examples/BQ/Hephestos/Configuration_adv.h +++ b/config/examples/BQ/Hephestos/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/BQ/Hephestos_2/Configuration_adv.h b/config/examples/BQ/Hephestos_2/Configuration_adv.h index b871e683f6..0f71ccc21d 100644 --- a/config/examples/BQ/Hephestos_2/Configuration_adv.h +++ b/config/examples/BQ/Hephestos_2/Configuration_adv.h @@ -1322,7 +1322,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/BQ/WITBOX/Configuration_adv.h b/config/examples/BQ/WITBOX/Configuration_adv.h index e79c639d2b..d9e339f546 100644 --- a/config/examples/BQ/WITBOX/Configuration_adv.h +++ b/config/examples/BQ/WITBOX/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/CTC/A13/Configuration_adv.h b/config/examples/CTC/A13/Configuration_adv.h index 32771e20f1..88cb6f5e06 100644 --- a/config/examples/CTC/A13/Configuration_adv.h +++ b/config/examples/CTC/A13/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/CTC/Bizer/Configuration_adv.h b/config/examples/CTC/Bizer/Configuration_adv.h index b6c5eb7f84..6552034bda 100644 --- a/config/examples/CTC/Bizer/Configuration_adv.h +++ b/config/examples/CTC/Bizer/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Cartesio/Configuration_adv.h b/config/examples/Cartesio/Configuration_adv.h index aea97d97cd..95cb9a40b0 100644 --- a/config/examples/Cartesio/Configuration_adv.h +++ b/config/examples/Cartesio/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index d01a7d67ec..1b7c6e9303 100644 --- a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h index fbeb393b82..b1f441db75 100644 --- a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h index 6f91a5d4e9..38e5af771a 100644 --- a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h index 2acdc45352..1c04335166 100644 --- a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h index 051b1adbf5..d2a61428e0 100644 --- a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h index 2acdc45352..1c04335166 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration_adv.h b/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration_adv.h index baef585817..387319501f 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Creality/CR-10 V2/Configuration_adv.h b/config/examples/Creality/CR-10 V2/Configuration_adv.h index 59b49621ba..ecaabe8d72 100644 --- a/config/examples/Creality/CR-10 V2/Configuration_adv.h +++ b/config/examples/Creality/CR-10 V2/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Creality/CR-10 V3/Configuration_adv.h b/config/examples/Creality/CR-10 V3/Configuration_adv.h index 4d22ce8f00..ef7555e7b8 100644 --- a/config/examples/Creality/CR-10 V3/Configuration_adv.h +++ b/config/examples/Creality/CR-10 V3/Configuration_adv.h @@ -1316,7 +1316,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 6ef2a51311..f320f3bad0 100644 --- a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h index c3e308472c..aed18ff989 100644 --- a/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h index 9a8632a3ef..7819681bf2 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 7d6fc820d2..65afb02090 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h index 2bf6561976..4a66c260d5 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h index 2aa546532a..5bd29d1707 100644 --- a/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Creality/CR-20 Pro/Configuration_adv.h b/config/examples/Creality/CR-20 Pro/Configuration_adv.h index 0d44f0b783..68a7a24a6b 100644 --- a/config/examples/Creality/CR-20 Pro/Configuration_adv.h +++ b/config/examples/Creality/CR-20 Pro/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Creality/CR-20/Configuration_adv.h b/config/examples/Creality/CR-20/Configuration_adv.h index 94e100a023..e6f1bd2c79 100644 --- a/config/examples/Creality/CR-20/Configuration_adv.h +++ b/config/examples/Creality/CR-20/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Creality/CR-30 PrintMill/Configuration_adv.h b/config/examples/Creality/CR-30 PrintMill/Configuration_adv.h index 2f9ae0cfa0..fc1a5c2b77 100644 --- a/config/examples/Creality/CR-30 PrintMill/Configuration_adv.h +++ b/config/examples/Creality/CR-30 PrintMill/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Creality/CR-6 SE/Configuration_adv.h b/config/examples/Creality/CR-6 SE/Configuration_adv.h index 5f71c4d09e..52d3b771b6 100644 --- a/config/examples/Creality/CR-6 SE/Configuration_adv.h +++ b/config/examples/Creality/CR-6 SE/Configuration_adv.h @@ -1315,7 +1315,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Creality/CR-8/Configuration_adv.h b/config/examples/Creality/CR-8/Configuration_adv.h index c9b7db74c9..cc4b7ce5ed 100644 --- a/config/examples/Creality/CR-8/Configuration_adv.h +++ b/config/examples/Creality/CR-8/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration_adv.h b/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration_adv.h index 9eb4d0ff70..6293d336fb 100644 --- a/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration_adv.h +++ b/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration_adv.h @@ -1315,7 +1315,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Creality/Ender-2/Configuration_adv.h b/config/examples/Creality/Ender-2/Configuration_adv.h index d89147041f..bfea522103 100644 --- a/config/examples/Creality/Ender-2/Configuration_adv.h +++ b/config/examples/Creality/Ender-2/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Creality/Ender-3 Max/Configuration_adv.h b/config/examples/Creality/Ender-3 Max/Configuration_adv.h index 1338b0857b..ea2a963d08 100644 --- a/config/examples/Creality/Ender-3 Max/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Max/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h index 9fd88289bb..58db34b91d 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h index 3ad25750b0..97691e2b13 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index bc2ea642d1..6b79912570 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index a052b3ff76..a807016c12 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h index 27708387b8..17a2744448 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h index 97567deb49..158af69b19 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h index 6408780726..9205b37580 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h @@ -1315,7 +1315,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h index f67e63a2aa..773589e290 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Creality/Ender-3 S1/Configuration_adv.h b/config/examples/Creality/Ender-3 S1/Configuration_adv.h index c2473c4da7..f2e9b79708 100644 --- a/config/examples/Creality/Ender-3 S1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 S1/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration_adv.h index de32a96afa..9b33a955b6 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration_adv.h @@ -1315,7 +1315,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration_adv.h index ff14e674a5..675dff26f9 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration_adv.h @@ -1315,7 +1315,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration_adv.h index 03e162a81b..9b9858cba3 100644 --- a/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration_adv.h @@ -1315,7 +1315,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration_adv.h index e2e6c7d65e..84f26d00c4 100644 --- a/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration_adv.h @@ -1315,7 +1315,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h index f7ed57f483..ed1550b679 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h index 8d091e6b58..a421fd5b5d 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h index 3a9bf7224b..c889de6012 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h index 68f2d2d631..126317a209 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h index 3a9bf7224b..c889de6012 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h index 06ef10d9e6..8efc9d55de 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h index ff87690e6c..df353e8de8 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index 1e1d8f7ac5..7b243e2920 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 221ffc0013..4cc7fd7697 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h index d1d83a452c..2b1e779bbb 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h index 454a00b84c..f8a7bb8c38 100644 --- a/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h index d0344ace7e..c47c9e0abd 100644 --- a/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h index f2e435dfbd..aed69fbad7 100644 --- a/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h index 1f502feda4..0cfc7ccc40 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h index 1f502feda4..0cfc7ccc40 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration_adv.h index e2c9ad929b..38f155e9af 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h index 1f502feda4..0cfc7ccc40 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h index 1f502feda4..0cfc7ccc40 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h index 04233d0319..6ceaebaffb 100644 --- a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h b/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h index ca61bced76..2156770db5 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h b/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h index 4359b762e2..fc8b5e4ef8 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h index 4a297c7abe..8d18a8d771 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration_adv.h b/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration_adv.h index b9cc127df3..83861c8f98 100644 --- a/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Creality/Ender-4/Configuration_adv.h b/config/examples/Creality/Ender-4/Configuration_adv.h index dbafda5e4e..9691389380 100644 --- a/config/examples/Creality/Ender-4/Configuration_adv.h +++ b/config/examples/Creality/Ender-4/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Creality/Ender-5 Plus/Configuration_adv.h b/config/examples/Creality/Ender-5 Plus/Configuration_adv.h index 18eb9ef56b..ef887d5a27 100644 --- a/config/examples/Creality/Ender-5 Plus/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Plus/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h index d743f3835e..df7ff3856c 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index 2b37dbceb1..7e7b981803 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h index b9065766af..9af8522902 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h index 4e212a90e5..2628eac2c4 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h index cb64c3f219..42a45caca2 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h index 35824a1400..3d310ca5f3 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h index d743f3835e..df7ff3856c 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h index 5bd9314ca3..982512db6a 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index 1e1d8f7ac5..7b243e2920 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 83a1aa210c..1e391d4a0c 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h index 48bd58b45a..962c52260d 100644 --- a/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h index 88ba39d395..dd4635b73c 100644 --- a/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Creality/Ender-6/Configuration_adv.h b/config/examples/Creality/Ender-6/Configuration_adv.h index e935042090..4215429110 100644 --- a/config/examples/Creality/Ender-6/Configuration_adv.h +++ b/config/examples/Creality/Ender-6/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h index 7cc795ea44..74d947fcb2 100644 --- a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h +++ b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Daycom/3DP-100/Configuration_adv.h b/config/examples/Daycom/3DP-100/Configuration_adv.h index 7a721c0aa7..af52190b87 100644 --- a/config/examples/Daycom/3DP-100/Configuration_adv.h +++ b/config/examples/Daycom/3DP-100/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h b/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h index 0c576bc5d2..bc434a149e 100644 --- a/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h +++ b/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/EasyThreeD/ET4000PLUS/Configuration_adv.h b/config/examples/EasyThreeD/ET4000PLUS/Configuration_adv.h index 3de6c29081..b236b532ea 100644 --- a/config/examples/EasyThreeD/ET4000PLUS/Configuration_adv.h +++ b/config/examples/EasyThreeD/ET4000PLUS/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Einstart-S/Configuration_adv.h b/config/examples/Einstart-S/Configuration_adv.h index 1d08aee3f9..8f991bd049 100644 --- a/config/examples/Einstart-S/Configuration_adv.h +++ b/config/examples/Einstart-S/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Elegoo/Neptune 2/Configuration_adv.h b/config/examples/Elegoo/Neptune 2/Configuration_adv.h index d45abd45d7..1ab6d92c8c 100644 --- a/config/examples/Elegoo/Neptune 2/Configuration_adv.h +++ b/config/examples/Elegoo/Neptune 2/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Eryone/Thinker SE/Configuration_adv.h b/config/examples/Eryone/Thinker SE/Configuration_adv.h index 2f80442f0a..a13c898276 100644 --- a/config/examples/Eryone/Thinker SE/Configuration_adv.h +++ b/config/examples/Eryone/Thinker SE/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Eryone/Thinker V2/Configuration_adv.h b/config/examples/Eryone/Thinker V2/Configuration_adv.h index 8d43a58b8d..a51e5e964f 100644 --- a/config/examples/Eryone/Thinker V2/Configuration_adv.h +++ b/config/examples/Eryone/Thinker V2/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/FYSETC/AIO_II/Configuration_adv.h b/config/examples/FYSETC/AIO_II/Configuration_adv.h index 11c4ad1a9a..e449caa750 100644 --- a/config/examples/FYSETC/AIO_II/Configuration_adv.h +++ b/config/examples/FYSETC/AIO_II/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/FYSETC/F6_13/Configuration_adv.h b/config/examples/FYSETC/F6_13/Configuration_adv.h index ad2423ec74..b3610c2873 100644 --- a/config/examples/FYSETC/F6_13/Configuration_adv.h +++ b/config/examples/FYSETC/F6_13/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/FYSETC/S6/Configuration_adv.h b/config/examples/FYSETC/S6/Configuration_adv.h index e959750a7c..9816c83ddf 100644 --- a/config/examples/FYSETC/S6/Configuration_adv.h +++ b/config/examples/FYSETC/S6/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Felix/DUAL/Configuration_adv.h b/config/examples/Felix/DUAL/Configuration_adv.h index 51edc7643f..c304818460 100644 --- a/config/examples/Felix/DUAL/Configuration_adv.h +++ b/config/examples/Felix/DUAL/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Felix/Single/Configuration_adv.h b/config/examples/Felix/Single/Configuration_adv.h index 51edc7643f..c304818460 100644 --- a/config/examples/Felix/Single/Configuration_adv.h +++ b/config/examples/Felix/Single/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/FlashForge/Creator 2X/Configuration_adv.h b/config/examples/FlashForge/Creator 2X/Configuration_adv.h index 7622e818a2..3aca102103 100644 --- a/config/examples/FlashForge/Creator 2X/Configuration_adv.h +++ b/config/examples/FlashForge/Creator 2X/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/FlashForge/CreatorPro/Configuration_adv.h b/config/examples/FlashForge/CreatorPro/Configuration_adv.h index 07a0abd656..158b238636 100644 --- a/config/examples/FlashForge/CreatorPro/Configuration_adv.h +++ b/config/examples/FlashForge/CreatorPro/Configuration_adv.h @@ -1313,7 +1313,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/FlyingBear/P902/Configuration_adv.h b/config/examples/FlyingBear/P902/Configuration_adv.h index d1e20593d7..8074332ea0 100644 --- a/config/examples/FlyingBear/P902/Configuration_adv.h +++ b/config/examples/FlyingBear/P902/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/FlyingBear/P905H/Configuration_adv.h b/config/examples/FlyingBear/P905H/Configuration_adv.h index 29758891ac..3d44ca1a20 100644 --- a/config/examples/FlyingBear/P905H/Configuration_adv.h +++ b/config/examples/FlyingBear/P905H/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/FoamCutter/Configuration_adv.h b/config/examples/FoamCutter/Configuration_adv.h index cf2e9da555..4ecb3df050 100644 --- a/config/examples/FoamCutter/Configuration_adv.h +++ b/config/examples/FoamCutter/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/config/examples/FolgerTech/i3-2020/Configuration_adv.h index 57ffb672f6..5340101df8 100644 --- a/config/examples/FolgerTech/i3-2020/Configuration_adv.h +++ b/config/examples/FolgerTech/i3-2020/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Formbot/Raptor/Configuration_adv.h b/config/examples/Formbot/Raptor/Configuration_adv.h index 979fc8d4bf..83ebab852c 100644 --- a/config/examples/Formbot/Raptor/Configuration_adv.h +++ b/config/examples/Formbot/Raptor/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h index 212fd41ef4..ec58f70579 100644 --- a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h +++ b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Formbot/T_Rex_3/Configuration_adv.h b/config/examples/Formbot/T_Rex_3/Configuration_adv.h index 155d32419c..0683f5741f 100644 --- a/config/examples/Formbot/T_Rex_3/Configuration_adv.h +++ b/config/examples/Formbot/T_Rex_3/Configuration_adv.h @@ -1318,7 +1318,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Geeetech/A10/Configuration_adv.h b/config/examples/Geeetech/A10/Configuration_adv.h index 49fd5d0d91..92667541a5 100644 --- a/config/examples/Geeetech/A10/Configuration_adv.h +++ b/config/examples/Geeetech/A10/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Geeetech/A10D/Configuration_adv.h b/config/examples/Geeetech/A10D/Configuration_adv.h index 760914100b..39ef827766 100644 --- a/config/examples/Geeetech/A10D/Configuration_adv.h +++ b/config/examples/Geeetech/A10D/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Geeetech/A10M/Stock LCD/Configuration_adv.h b/config/examples/Geeetech/A10M/Stock LCD/Configuration_adv.h index ef3fa75175..71ebf4a8f1 100644 --- a/config/examples/Geeetech/A10M/Stock LCD/Configuration_adv.h +++ b/config/examples/Geeetech/A10M/Stock LCD/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration_adv.h b/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration_adv.h index ef3fa75175..71ebf4a8f1 100644 --- a/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration_adv.h +++ b/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Geeetech/A10PRO/Configuration_adv.h b/config/examples/Geeetech/A10PRO/Configuration_adv.h index 49fd5d0d91..92667541a5 100644 --- a/config/examples/Geeetech/A10PRO/Configuration_adv.h +++ b/config/examples/Geeetech/A10PRO/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Geeetech/A10T/Stock LCD/Configuration_adv.h b/config/examples/Geeetech/A10T/Stock LCD/Configuration_adv.h index ef3fa75175..71ebf4a8f1 100644 --- a/config/examples/Geeetech/A10T/Stock LCD/Configuration_adv.h +++ b/config/examples/Geeetech/A10T/Stock LCD/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration_adv.h b/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration_adv.h index ef3fa75175..71ebf4a8f1 100644 --- a/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration_adv.h +++ b/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Geeetech/A20/Configuration_adv.h b/config/examples/Geeetech/A20/Configuration_adv.h index bb67180d87..24bb26f18f 100644 --- a/config/examples/Geeetech/A20/Configuration_adv.h +++ b/config/examples/Geeetech/A20/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Geeetech/A20M/Configuration_adv.h b/config/examples/Geeetech/A20M/Configuration_adv.h index bb67180d87..24bb26f18f 100644 --- a/config/examples/Geeetech/A20M/Configuration_adv.h +++ b/config/examples/Geeetech/A20M/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Geeetech/A20T/Configuration_adv.h b/config/examples/Geeetech/A20T/Configuration_adv.h index bb67180d87..24bb26f18f 100644 --- a/config/examples/Geeetech/A20T/Configuration_adv.h +++ b/config/examples/Geeetech/A20T/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Geeetech/A30/Configuration_adv.h b/config/examples/Geeetech/A30/Configuration_adv.h index 328027eff0..d8df6b9a22 100644 --- a/config/examples/Geeetech/A30/Configuration_adv.h +++ b/config/examples/Geeetech/A30/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Geeetech/A30M/Configuration_adv.h b/config/examples/Geeetech/A30M/Configuration_adv.h index 328027eff0..d8df6b9a22 100644 --- a/config/examples/Geeetech/A30M/Configuration_adv.h +++ b/config/examples/Geeetech/A30M/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Geeetech/A30T/Configuration_adv.h b/config/examples/Geeetech/A30T/Configuration_adv.h index 328027eff0..d8df6b9a22 100644 --- a/config/examples/Geeetech/A30T/Configuration_adv.h +++ b/config/examples/Geeetech/A30T/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Geeetech/D200/Configuration_adv.h b/config/examples/Geeetech/D200/Configuration_adv.h index 2ecd59c917..3fc81aa11d 100644 --- a/config/examples/Geeetech/D200/Configuration_adv.h +++ b/config/examples/Geeetech/D200/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Geeetech/Duplicator5/Configuration_adv.h b/config/examples/Geeetech/Duplicator5/Configuration_adv.h index e959750a7c..9816c83ddf 100644 --- a/config/examples/Geeetech/Duplicator5/Configuration_adv.h +++ b/config/examples/Geeetech/Duplicator5/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Geeetech/E180/Configuration_adv.h b/config/examples/Geeetech/E180/Configuration_adv.h index 328027eff0..d8df6b9a22 100644 --- a/config/examples/Geeetech/E180/Configuration_adv.h +++ b/config/examples/Geeetech/E180/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Geeetech/M201/Configuration_adv.h b/config/examples/Geeetech/M201/Configuration_adv.h index 2ecd59c917..3fc81aa11d 100644 --- a/config/examples/Geeetech/M201/Configuration_adv.h +++ b/config/examples/Geeetech/M201/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Geeetech/MeCreator2/Configuration_adv.h b/config/examples/Geeetech/MeCreator2/Configuration_adv.h index 31d7832e26..3adbb30111 100644 --- a/config/examples/Geeetech/MeCreator2/Configuration_adv.h +++ b/config/examples/Geeetech/MeCreator2/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Geeetech/Me_creator/Configuration_adv.h b/config/examples/Geeetech/Me_creator/Configuration_adv.h index e959750a7c..9816c83ddf 100644 --- a/config/examples/Geeetech/Me_creator/Configuration_adv.h +++ b/config/examples/Geeetech/Me_creator/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Geeetech/Me_ducer/Configuration_adv.h b/config/examples/Geeetech/Me_ducer/Configuration_adv.h index 99f4746465..7b84a4c68b 100644 --- a/config/examples/Geeetech/Me_ducer/Configuration_adv.h +++ b/config/examples/Geeetech/Me_ducer/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Geeetech/PI3A PRO/Configuration_adv.h b/config/examples/Geeetech/PI3A PRO/Configuration_adv.h index c0e8fd205e..1ecf5eb11f 100644 --- a/config/examples/Geeetech/PI3A PRO/Configuration_adv.h +++ b/config/examples/Geeetech/PI3A PRO/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h index 49fd5d0d91..92667541a5 100644 --- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h index 49fd5d0d91..92667541a5 100644 --- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/HMS434/Configuration_adv.h b/config/examples/HMS434/Configuration_adv.h index 621e295ba0..afa320aecb 100644 --- a/config/examples/HMS434/Configuration_adv.h +++ b/config/examples/HMS434/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Index/REV_03/Configuration_adv.h b/config/examples/Index/REV_03/Configuration_adv.h index 363ea8e681..0a78088f6e 100644 --- a/config/examples/Index/REV_03/Configuration_adv.h +++ b/config/examples/Index/REV_03/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Infitary/i3-M508/Configuration_adv.h b/config/examples/Infitary/i3-M508/Configuration_adv.h index d8d5c13242..a7976ad460 100644 --- a/config/examples/Infitary/i3-M508/Configuration_adv.h +++ b/config/examples/Infitary/i3-M508/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h b/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h index 3bad89f05a..8f5226718f 100644 --- a/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h +++ b/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h @@ -1313,7 +1313,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/JGAurora/A1/Configuration_adv.h b/config/examples/JGAurora/A1/Configuration_adv.h index fbf6d1cbcf..5e34b95fe0 100644 --- a/config/examples/JGAurora/A1/Configuration_adv.h +++ b/config/examples/JGAurora/A1/Configuration_adv.h @@ -1319,7 +1319,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/JGAurora/A5/Configuration_adv.h b/config/examples/JGAurora/A5/Configuration_adv.h index 53168ff094..01f61403e8 100644 --- a/config/examples/JGAurora/A5/Configuration_adv.h +++ b/config/examples/JGAurora/A5/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/JGAurora/A5S/Configuration_adv.h b/config/examples/JGAurora/A5S/Configuration_adv.h index fbf6d1cbcf..5e34b95fe0 100644 --- a/config/examples/JGAurora/A5S/Configuration_adv.h +++ b/config/examples/JGAurora/A5S/Configuration_adv.h @@ -1319,7 +1319,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/JGAurora/Magic/Configuration_adv.h b/config/examples/JGAurora/Magic/Configuration_adv.h index e8349109e0..adc763b392 100644 --- a/config/examples/JGAurora/Magic/Configuration_adv.h +++ b/config/examples/JGAurora/Magic/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Kingroon/KP3/Configuration_adv.h b/config/examples/Kingroon/KP3/Configuration_adv.h index 3fee62bbe8..f7ee029b86 100644 --- a/config/examples/Kingroon/KP3/Configuration_adv.h +++ b/config/examples/Kingroon/KP3/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Labists/ET4/Configuration_adv.h b/config/examples/Labists/ET4/Configuration_adv.h index 719f4d007a..40b4b50319 100644 --- a/config/examples/Labists/ET4/Configuration_adv.h +++ b/config/examples/Labists/ET4/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/LulzBot/TAZ4/Configuration_adv.h b/config/examples/LulzBot/TAZ4/Configuration_adv.h index ced6ac865b..f3a78c14b8 100644 --- a/config/examples/LulzBot/TAZ4/Configuration_adv.h +++ b/config/examples/LulzBot/TAZ4/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/MBot/Cube/Configuration_adv.h b/config/examples/MBot/Cube/Configuration_adv.h index 073e3de181..e7f40caaeb 100644 --- a/config/examples/MBot/Cube/Configuration_adv.h +++ b/config/examples/MBot/Cube/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h b/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h index b09beacef9..bc0527c1b3 100644 --- a/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h +++ b/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/MakerParts/Configuration_adv.h b/config/examples/MakerParts/Configuration_adv.h index c6573b6922..ef0d91f089 100644 --- a/config/examples/MakerParts/Configuration_adv.h +++ b/config/examples/MakerParts/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Malyan/M150/Configuration_adv.h b/config/examples/Malyan/M150/Configuration_adv.h index ef81c48daf..c1f0ffdb93 100644 --- a/config/examples/Malyan/M150/Configuration_adv.h +++ b/config/examples/Malyan/M150/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Malyan/M200/Configuration_adv.h b/config/examples/Malyan/M200/Configuration_adv.h index 74b12b6353..ff968e8bc8 100644 --- a/config/examples/Malyan/M200/Configuration_adv.h +++ b/config/examples/Malyan/M200/Configuration_adv.h @@ -1316,7 +1316,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/config/examples/Micromake/C1/enhanced/Configuration_adv.h index 9bb5936619..effa899b41 100644 --- a/config/examples/Micromake/C1/enhanced/Configuration_adv.h +++ b/config/examples/Micromake/C1/enhanced/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Mks/Robin/Configuration_adv.h b/config/examples/Mks/Robin/Configuration_adv.h index cf2e9da555..4ecb3df050 100644 --- a/config/examples/Mks/Robin/Configuration_adv.h +++ b/config/examples/Mks/Robin/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Mks/Sbase/Configuration_adv.h b/config/examples/Mks/Sbase/Configuration_adv.h index 2f28667064..866711d945 100644 --- a/config/examples/Mks/Sbase/Configuration_adv.h +++ b/config/examples/Mks/Sbase/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Modix/Big60/Configuration_adv.h b/config/examples/Modix/Big60/Configuration_adv.h index 036f830ce0..52f3e48722 100644 --- a/config/examples/Modix/Big60/Configuration_adv.h +++ b/config/examples/Modix/Big60/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Nextion/Configuration_adv.h b/config/examples/Nextion/Configuration_adv.h index 48e94aab29..50d70c7441 100644 --- a/config/examples/Nextion/Configuration_adv.h +++ b/config/examples/Nextion/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Ortur 4/Configuration_adv.h b/config/examples/Ortur 4/Configuration_adv.h index 38381a9c55..5bf64e37ea 100644 --- a/config/examples/Ortur 4/Configuration_adv.h +++ b/config/examples/Ortur 4/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Polargraph/Configuration_adv.h b/config/examples/Polargraph/Configuration_adv.h index 6d5f98d8b7..99978fa84b 100644 --- a/config/examples/Polargraph/Configuration_adv.h +++ b/config/examples/Polargraph/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Prusa/MK3/Configuration_adv.h b/config/examples/Prusa/MK3/Configuration_adv.h index 32b03f8f78..9b3739f3e7 100644 --- a/config/examples/Prusa/MK3/Configuration_adv.h +++ b/config/examples/Prusa/MK3/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h index 81ee077680..c97967c1fc 100644 --- a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h +++ b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Qidi/Qidi 1/Configuration_adv.h b/config/examples/Qidi/Qidi 1/Configuration_adv.h index 10af87d8a9..6d0ff52091 100644 --- a/config/examples/Qidi/Qidi 1/Configuration_adv.h +++ b/config/examples/Qidi/Qidi 1/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Raiscube/A8r/Configuration_adv.h b/config/examples/Raiscube/A8r/Configuration_adv.h index 4ee0cbabfb..c184c21482 100644 --- a/config/examples/Raiscube/A8r/Configuration_adv.h +++ b/config/examples/Raiscube/A8r/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/RapideLite/RL200/Configuration_adv.h b/config/examples/RapideLite/RL200/Configuration_adv.h index be81d45b8b..0be08eed7c 100644 --- a/config/examples/RapideLite/RL200/Configuration_adv.h +++ b/config/examples/RapideLite/RL200/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Renkforce/RF100/Configuration_adv.h b/config/examples/Renkforce/RF100/Configuration_adv.h index d44ff3ee06..cb5ebf7d58 100644 --- a/config/examples/Renkforce/RF100/Configuration_adv.h +++ b/config/examples/Renkforce/RF100/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Renkforce/RF100XL/Configuration_adv.h b/config/examples/Renkforce/RF100XL/Configuration_adv.h index d44ff3ee06..cb5ebf7d58 100644 --- a/config/examples/Renkforce/RF100XL/Configuration_adv.h +++ b/config/examples/Renkforce/RF100XL/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Renkforce/RF100v2/Configuration_adv.h b/config/examples/Renkforce/RF100v2/Configuration_adv.h index d44ff3ee06..cb5ebf7d58 100644 --- a/config/examples/Renkforce/RF100v2/Configuration_adv.h +++ b/config/examples/Renkforce/RF100v2/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/RigidBot/Configuration_adv.h b/config/examples/RigidBot/Configuration_adv.h index c811a58aff..f30b84faa2 100644 --- a/config/examples/RigidBot/Configuration_adv.h +++ b/config/examples/RigidBot/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/SCARA/MP_SCARA/Configuration_adv.h b/config/examples/SCARA/MP_SCARA/Configuration_adv.h index cc61f0ce91..77f4b27a52 100644 --- a/config/examples/SCARA/MP_SCARA/Configuration_adv.h +++ b/config/examples/SCARA/MP_SCARA/Configuration_adv.h @@ -1311,7 +1311,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/SCARA/Morgan/Configuration_adv.h b/config/examples/SCARA/Morgan/Configuration_adv.h index 409f32f34d..12288b86a1 100644 --- a/config/examples/SCARA/Morgan/Configuration_adv.h +++ b/config/examples/SCARA/Morgan/Configuration_adv.h @@ -1311,7 +1311,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h index ccdf167b75..4bb4724a8e 100644 --- a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h +++ b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Sanguinololu/Configuration_adv.h b/config/examples/Sanguinololu/Configuration_adv.h index c76447a438..4b3a298125 100644 --- a/config/examples/Sanguinololu/Configuration_adv.h +++ b/config/examples/Sanguinololu/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Simulator/Configuration_adv.h b/config/examples/Simulator/Configuration_adv.h index 467addfb94..5b99109f79 100644 --- a/config/examples/Simulator/Configuration_adv.h +++ b/config/examples/Simulator/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration_adv.h b/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration_adv.h index 0bbd1bf758..b0ce8cc458 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration_adv.h @@ -1318,7 +1318,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 8a205a94a8..6eecfbac30 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h b/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h index e3d8ad5603..3990274d36 100644 --- a/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h b/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h index 277f7b11f8..bf72e0fb71 100644 --- a/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Sunlu/S8/Configuration_adv.h b/config/examples/Sunlu/S8/Configuration_adv.h index 472e284581..847408fcf4 100644 --- a/config/examples/Sunlu/S8/Configuration_adv.h +++ b/config/examples/Sunlu/S8/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h b/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h index 41b74e9a85..f9084b15a1 100644 --- a/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h +++ b/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Tevo/Michelangelo/Configuration_adv.h b/config/examples/Tevo/Michelangelo/Configuration_adv.h index 69bd793e54..856eaf8c03 100644 --- a/config/examples/Tevo/Michelangelo/Configuration_adv.h +++ b/config/examples/Tevo/Michelangelo/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Tevo/Nereus/Configuration_adv.h b/config/examples/Tevo/Nereus/Configuration_adv.h index efe7ad842b..9f8206509a 100644 --- a/config/examples/Tevo/Nereus/Configuration_adv.h +++ b/config/examples/Tevo/Nereus/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Tevo/Tarantula Pro/Configuration_adv.h b/config/examples/Tevo/Tarantula Pro/Configuration_adv.h index c8c172c09a..54b28070af 100644 --- a/config/examples/Tevo/Tarantula Pro/Configuration_adv.h +++ b/config/examples/Tevo/Tarantula Pro/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h index 6eb683d408..e756597baf 100644 --- a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h +++ b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h index 6eb683d408..e756597baf 100644 --- a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h +++ b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/TheBorg/Configuration_adv.h b/config/examples/TheBorg/Configuration_adv.h index e2abebb6dd..d9dde2ca05 100644 --- a/config/examples/TheBorg/Configuration_adv.h +++ b/config/examples/TheBorg/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/TinyBoy2/Configuration_adv.h b/config/examples/TinyBoy2/Configuration_adv.h index d07414dd69..7701d9d7bf 100644 --- a/config/examples/TinyBoy2/Configuration_adv.h +++ b/config/examples/TinyBoy2/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Tronxy/X3A/Configuration_adv.h b/config/examples/Tronxy/X3A/Configuration_adv.h index bd3b39fcf6..939e934476 100644 --- a/config/examples/Tronxy/X3A/Configuration_adv.h +++ b/config/examples/Tronxy/X3A/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Tronxy/X5S-2E/Configuration_adv.h b/config/examples/Tronxy/X5S-2E/Configuration_adv.h index e06ca1480a..9084f63434 100644 --- a/config/examples/Tronxy/X5S-2E/Configuration_adv.h +++ b/config/examples/Tronxy/X5S-2E/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Tronxy/X5SA-2E/Configuration_adv.h b/config/examples/Tronxy/X5SA-2E/Configuration_adv.h index 3ffcdf66bc..e3ec42b623 100644 --- a/config/examples/Tronxy/X5SA-2E/Configuration_adv.h +++ b/config/examples/Tronxy/X5SA-2E/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Tronxy/X5SA/Configuration_adv.h b/config/examples/Tronxy/X5SA/Configuration_adv.h index 2ce4bedd46..3789147384 100644 --- a/config/examples/Tronxy/X5SA/Configuration_adv.h +++ b/config/examples/Tronxy/X5SA/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Two Trees/BlueR Plus/Configuration_adv.h b/config/examples/Two Trees/BlueR Plus/Configuration_adv.h index 6790334754..ede6d0a8c6 100644 --- a/config/examples/Two Trees/BlueR Plus/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR Plus/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h b/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h index 6c793108b5..ded7b48d01 100644 --- a/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h b/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h index 6c793108b5..ded7b48d01 100644 --- a/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h b/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h index 6c793108b5..ded7b48d01 100644 --- a/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h index a407930de9..28170d380a 100644 --- a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h +++ b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h @@ -1320,7 +1320,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h b/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h index d1d178fdf4..4df06d5796 100644 --- a/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h +++ b/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/UltiMachine/Archim1/Configuration_adv.h b/config/examples/UltiMachine/Archim1/Configuration_adv.h index b213019481..8782da92c3 100644 --- a/config/examples/UltiMachine/Archim1/Configuration_adv.h +++ b/config/examples/UltiMachine/Archim1/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/UltiMachine/Archim2/Configuration_adv.h b/config/examples/UltiMachine/Archim2/Configuration_adv.h index c990d0c000..de77d119a6 100644 --- a/config/examples/UltiMachine/Archim2/Configuration_adv.h +++ b/config/examples/UltiMachine/Archim2/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Ultimaker/Ultimaker 2/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker 2/Configuration_adv.h index 4277d8e782..96003b753d 100644 --- a/config/examples/Ultimaker/Ultimaker 2/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker 2/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h index 8af598a001..1d5c0007ce 100644 --- a/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration_adv.h index 63c476a8ff..b05dccb8f8 100644 --- a/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/VORONDesign/Configuration_adv.h b/config/examples/VORONDesign/Configuration_adv.h index b9b6478716..e5e7e6ef36 100644 --- a/config/examples/VORONDesign/Configuration_adv.h +++ b/config/examples/VORONDesign/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Velleman/K8200/Configuration_adv.h b/config/examples/Velleman/K8200/Configuration_adv.h index b3ec0b60ea..c08ddd0305 100644 --- a/config/examples/Velleman/K8200/Configuration_adv.h +++ b/config/examples/Velleman/K8200/Configuration_adv.h @@ -1327,7 +1327,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h b/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h index 296db780ee..1ca8b3844b 100644 --- a/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h +++ b/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Velleman/K8400/Single-head/Configuration_adv.h b/config/examples/Velleman/K8400/Single-head/Configuration_adv.h index 296db780ee..1ca8b3844b 100644 --- a/config/examples/Velleman/K8400/Single-head/Configuration_adv.h +++ b/config/examples/Velleman/K8400/Single-head/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/WASP/PowerWASP/Configuration_adv.h b/config/examples/WASP/PowerWASP/Configuration_adv.h index db3d67dbc4..67f1fee289 100644 --- a/config/examples/WASP/PowerWASP/Configuration_adv.h +++ b/config/examples/WASP/PowerWASP/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h b/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h index a9e0f7d1f8..6272bd1281 100644 --- a/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h index 6dda4c7f4b..c42fc55ff0 100644 --- a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h @@ -1316,7 +1316,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h index 9617c860ef..8f80e1ae6b 100644 --- a/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h index e869217622..6f52012c44 100644 --- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Wanhao/Duplicator i3 Plus/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 Plus/Configuration_adv.h index cf2e9da555..4ecb3df050 100644 --- a/config/examples/Wanhao/Duplicator i3 Plus/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 Plus/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Weedo/Tina2/V2/Configuration_adv.h b/config/examples/Weedo/Tina2/V2/Configuration_adv.h index 46af64fcef..d6c0f37b21 100644 --- a/config/examples/Weedo/Tina2/V2/Configuration_adv.h +++ b/config/examples/Weedo/Tina2/V2/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Weedo/Tina2/V3/Configuration_adv.h b/config/examples/Weedo/Tina2/V3/Configuration_adv.h index 46af64fcef..d6c0f37b21 100644 --- a/config/examples/Weedo/Tina2/V3/Configuration_adv.h +++ b/config/examples/Weedo/Tina2/V3/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Weistek/wt150/Configuration_adv.h b/config/examples/Weistek/wt150/Configuration_adv.h index 7351c936ae..e40d678ff6 100644 --- a/config/examples/Weistek/wt150/Configuration_adv.h +++ b/config/examples/Weistek/wt150/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Zonestar/P802M/Configuration_adv.h b/config/examples/Zonestar/P802M/Configuration_adv.h index 6da8969edd..d3beb80e94 100644 --- a/config/examples/Zonestar/P802M/Configuration_adv.h +++ b/config/examples/Zonestar/P802M/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h index 16a0fc8b7b..3796f899d2 100644 --- a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h +++ b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h index 4fe8a31e09..28a5f4bb3e 100644 --- a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h @@ -1317,7 +1317,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h index 7f394d492c..11a7145f40 100644 --- a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h @@ -1316,7 +1316,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/delta/Anycubic/Predator/Configuration_adv.h b/config/examples/delta/Anycubic/Predator/Configuration_adv.h index 6609659e1f..eaed02b05e 100644 --- a/config/examples/delta/Anycubic/Predator/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Predator/Configuration_adv.h @@ -1317,7 +1317,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h index 9a8ea35321..ba5398bfe7 100644 --- a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h +++ b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h @@ -1316,7 +1316,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h index 9a8ea35321..ba5398bfe7 100644 --- a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h +++ b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h @@ -1316,7 +1316,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h index 821609be9c..771d609a10 100644 --- a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h +++ b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h @@ -1316,7 +1316,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h b/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h index 8559693d51..bc2b5fa1b6 100644 --- a/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h +++ b/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h @@ -1316,7 +1316,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h b/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h index b65a6c6ca2..d8a3b73ac4 100644 --- a/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h +++ b/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h @@ -1317,7 +1317,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h index e0c80e8bf5..3ec25148bd 100644 --- a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h +++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h @@ -1316,7 +1316,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/delta/FLSUN/kossel/Configuration_adv.h b/config/examples/delta/FLSUN/kossel/Configuration_adv.h index e0c80e8bf5..3ec25148bd 100644 --- a/config/examples/delta/FLSUN/kossel/Configuration_adv.h +++ b/config/examples/delta/FLSUN/kossel/Configuration_adv.h @@ -1316,7 +1316,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h index 03425177d3..faff8ea152 100644 --- a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h +++ b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h @@ -1316,7 +1316,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/delta/Geeetech/G2/Configuration_adv.h b/config/examples/delta/Geeetech/G2/Configuration_adv.h index 107094c276..67db2cca61 100644 --- a/config/examples/delta/Geeetech/G2/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2/Configuration_adv.h @@ -1316,7 +1316,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h b/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h index 9db96bd8b5..3215c2182b 100644 --- a/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h @@ -1316,7 +1316,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/delta/Geeetech/G2S/Configuration_adv.h b/config/examples/delta/Geeetech/G2S/Configuration_adv.h index 9db96bd8b5..3215c2182b 100644 --- a/config/examples/delta/Geeetech/G2S/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2S/Configuration_adv.h @@ -1316,7 +1316,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h b/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h index 9db96bd8b5..3215c2182b 100644 --- a/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h @@ -1316,7 +1316,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h index 5f2afda839..ff7bda266e 100644 --- a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h +++ b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h @@ -1316,7 +1316,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h b/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h index e4cf628ebb..8a018c59bc 100644 --- a/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h +++ b/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h @@ -1316,7 +1316,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/delta/MKS/SBASE/Configuration_adv.h b/config/examples/delta/MKS/SBASE/Configuration_adv.h index 2ee3fd5e37..11195d3505 100644 --- a/config/examples/delta/MKS/SBASE/Configuration_adv.h +++ b/config/examples/delta/MKS/SBASE/Configuration_adv.h @@ -1316,7 +1316,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/delta/Malyan M300/Configuration_adv.h b/config/examples/delta/Malyan M300/Configuration_adv.h index 696d30ec25..a2e9e920fd 100644 --- a/config/examples/delta/Malyan M300/Configuration_adv.h +++ b/config/examples/delta/Malyan M300/Configuration_adv.h @@ -1316,7 +1316,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/delta/Tevo Little Monster/Configuration_adv.h b/config/examples/delta/Tevo Little Monster/Configuration_adv.h index 1943a734e1..45e621c49b 100644 --- a/config/examples/delta/Tevo Little Monster/Configuration_adv.h +++ b/config/examples/delta/Tevo Little Monster/Configuration_adv.h @@ -1316,7 +1316,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/delta/generic/Configuration_adv.h b/config/examples/delta/generic/Configuration_adv.h index 03425177d3..faff8ea152 100644 --- a/config/examples/delta/generic/Configuration_adv.h +++ b/config/examples/delta/generic/Configuration_adv.h @@ -1316,7 +1316,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/delta/kossel_clear/Configuration_adv.h b/config/examples/delta/kossel_clear/Configuration_adv.h index 63f334d428..a56714f6d7 100644 --- a/config/examples/delta/kossel_clear/Configuration_adv.h +++ b/config/examples/delta/kossel_clear/Configuration_adv.h @@ -1316,7 +1316,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/delta/kossel_xl/Configuration_adv.h b/config/examples/delta/kossel_xl/Configuration_adv.h index c0ee6c1044..b0c1dc3122 100644 --- a/config/examples/delta/kossel_xl/Configuration_adv.h +++ b/config/examples/delta/kossel_xl/Configuration_adv.h @@ -1316,7 +1316,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/config/examples/gCreate/gMax1.5+/Configuration_adv.h index 9ae2195d37..3706a91b4f 100644 --- a/config/examples/gCreate/gMax1.5+/Configuration_adv.h +++ b/config/examples/gCreate/gMax1.5+/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration_adv.h b/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration_adv.h index 99d978aaa6..567dc42a33 100644 --- a/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration_adv.h +++ b/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/makibox/Configuration_adv.h b/config/examples/makibox/Configuration_adv.h index 692a134fc7..c358fba32b 100644 --- a/config/examples/makibox/Configuration_adv.h +++ b/config/examples/makibox/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif diff --git a/config/examples/tvrrug/Round2/Configuration_adv.h b/config/examples/tvrrug/Round2/Configuration_adv.h index aaaf6a3e72..9641b65d64 100644 --- a/config/examples/tvrrug/Round2/Configuration_adv.h +++ b/config/examples/tvrrug/Round2/Configuration_adv.h @@ -1314,7 +1314,7 @@ #define XATC_START_Z 0.0 #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe - #define XATX_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points + #define XATC_Z_OFFSETS { 0, 0, 0 } // Default Z offsets for X axis sample points #endif #endif