3D-printing/Configurations
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Configurations.git synced 2025-07-06 06:27:35 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions

🩹 Fix AnyCubic Vyper auto-fan, adjust probing (#1063)

Browse source
This commit is contained in:
Nicolas Graziano 2024-06-09 03:50:02 +02:00 • committed by GitHub
parent f834e85a00
commit 5eb004ea1d
No known key found for this signature in database
GPG key ID: B5690EEEBB952194
2 changed files with 7 additions and 7 deletions
Download patch file Download diff file Expand all files Collapse all files

12
config/examples/AnyCubic/Vyper/Configuration.h
View file

@ -1635,12 +1635,12 @@
* Useful for a strain gauge or piezo sensor that needs to factor out
* elements such as cables pulling on the carriage.
*/
//#define PROBE_TARE
#define PROBE_TARE
#if ENABLED(PROBE_TARE)
#define PROBE_TARE_TIME 200 // (ms) Time to hold tare pin
#define PROBE_TARE_DELAY 200 // (ms) Delay after tare before
#define PROBE_TARE_STATE HIGH // State to write pin for tare
//#define PROBE_TARE_PIN PA5 // Override default pin
#define PROBE_TARE_TIME 300 // (ms) Time to hold tare pin
#define PROBE_TARE_DELAY 100 // (ms) Delay after tare before
#define PROBE_TARE_STATE LOW // State to write pin for tare
#define PROBE_TARE_PIN AUTO_LEVEL_TX_PIN // Override default pin
#if ENABLED(PROBE_ACTIVATION_SWITCH)
//#define PROBE_TARE_ONLY_WHILE_INACTIVE // Fail to tare/probe if PROBE_ACTIVATION_SWITCH is active
#endif
@ -2105,7 +2105,7 @@
*/
#define ENABLE_LEVELING_FADE_HEIGHT
#if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
#define DEFAULT_LEVELING_FADE_HEIGHT 10.0 // (mm) Default fade height.
#define DEFAULT_LEVELING_FADE_HEIGHT 0.0 // (mm) Default fade height.
#endif
/**

2
config/examples/AnyCubic/Vyper/Configuration_adv.h
View file

@ -681,7 +681,7 @@
* Multiple extruders can be assigned to the same pin in which case
* the fan will turn on when any selected extruder is above the threshold.
*/
//#define E0_AUTO_FAN_PIN PB1
#define E0_AUTO_FAN_PIN PB1
#define E1_AUTO_FAN_PIN -1
#define E2_AUTO_FAN_PIN -1
#define E3_AUTO_FAN_PIN -1