diff --git a/config/default/Configuration_adv.h b/config/default/Configuration_adv.h index 891079e60f..0358ac295d 100644 --- a/config/default/Configuration_adv.h +++ b/config/default/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h index ee3cdd3638..f8b98c2650 100644 --- a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h +++ b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h index 44df9da5c0..477866c7ac 100644 --- a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h +++ b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h index 74a0c9a073..adc5ad715b 100644 --- a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h +++ b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h index 21a0c3c38e..d2f56b62b3 100644 --- a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h +++ b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h @@ -1535,33 +1535,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - #define SD_REPRINT_LAST_SELECTED_FILE + #define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Alfawise/U20/Configuration_adv.h b/config/examples/Alfawise/U20/Configuration_adv.h index 6564f965c6..25a5f2aa6b 100644 --- a/config/examples/Alfawise/U20/Configuration_adv.h +++ b/config/examples/Alfawise/U20/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - #define SD_REPRINT_LAST_SELECTED_FILE + #define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/AliExpress/UM2pExt/Configuration_adv.h b/config/examples/AliExpress/UM2pExt/Configuration_adv.h index 023e201ade..4751f113db 100644 --- a/config/examples/AliExpress/UM2pExt/Configuration_adv.h +++ b/config/examples/AliExpress/UM2pExt/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ #define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Anet/A2/Configuration_adv.h b/config/examples/Anet/A2/Configuration_adv.h index 3272c6f976..1332567f9c 100644 --- a/config/examples/Anet/A2/Configuration_adv.h +++ b/config/examples/Anet/A2/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Anet/A2plus/Configuration_adv.h b/config/examples/Anet/A2plus/Configuration_adv.h index 3272c6f976..1332567f9c 100644 --- a/config/examples/Anet/A2plus/Configuration_adv.h +++ b/config/examples/Anet/A2plus/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Anet/A6/Configuration_adv.h b/config/examples/Anet/A6/Configuration_adv.h index 86d0b34937..38555291e4 100644 --- a/config/examples/Anet/A6/Configuration_adv.h +++ b/config/examples/Anet/A6/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Anet/A8/Configuration_adv.h b/config/examples/Anet/A8/Configuration_adv.h index b3150460b4..fb3f932c76 100644 --- a/config/examples/Anet/A8/Configuration_adv.h +++ b/config/examples/Anet/A8/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Anet/A8plus/Configuration_adv.h b/config/examples/Anet/A8plus/Configuration_adv.h index 1daae489a8..9ffb6643b1 100644 --- a/config/examples/Anet/A8plus/Configuration_adv.h +++ b/config/examples/Anet/A8plus/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Anet/A9/Configuration_adv.h b/config/examples/Anet/A9/Configuration_adv.h index 84557eeda2..e4766b1c93 100644 --- a/config/examples/Anet/A9/Configuration_adv.h +++ b/config/examples/Anet/A9/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Anet/E10/Configuration_adv.h b/config/examples/Anet/E10/Configuration_adv.h index 7383a5d383..150c30f603 100644 --- a/config/examples/Anet/E10/Configuration_adv.h +++ b/config/examples/Anet/E10/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h b/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h index 3478075a64..03c18d8f70 100644 --- a/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h +++ b/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Anet/E16/Stock/Configuration_adv.h b/config/examples/Anet/E16/Stock/Configuration_adv.h index 7822a2624c..09d719cea4 100644 --- a/config/examples/Anet/E16/Stock/Configuration_adv.h +++ b/config/examples/Anet/E16/Stock/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Anet/ET4+/Configuration_adv.h b/config/examples/Anet/ET4+/Configuration_adv.h index 17e35b9288..9a8ff485f8 100644 --- a/config/examples/Anet/ET4+/Configuration_adv.h +++ b/config/examples/Anet/ET4+/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ #define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Anet/ET4-Pro/Configuration_adv.h b/config/examples/Anet/ET4-Pro/Configuration_adv.h index 17e35b9288..9a8ff485f8 100644 --- a/config/examples/Anet/ET4-Pro/Configuration_adv.h +++ b/config/examples/Anet/ET4-Pro/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ #define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Anet/ET4/Configuration_adv.h b/config/examples/Anet/ET4/Configuration_adv.h index efa5dfe67d..e95d4dc2d3 100644 --- a/config/examples/Anet/ET4/Configuration_adv.h +++ b/config/examples/Anet/ET4/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ #define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Anet/ET4X/Configuration_adv.h b/config/examples/Anet/ET4X/Configuration_adv.h index efa5dfe67d..e95d4dc2d3 100644 --- a/config/examples/Anet/ET4X/Configuration_adv.h +++ b/config/examples/Anet/ET4X/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ #define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Anet/ET5-Pro/Configuration_adv.h b/config/examples/Anet/ET5-Pro/Configuration_adv.h index 46455b5580..e6c390dbf7 100644 --- a/config/examples/Anet/ET5-Pro/Configuration_adv.h +++ b/config/examples/Anet/ET5-Pro/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Anet/ET5/Configuration_adv.h b/config/examples/Anet/ET5/Configuration_adv.h index 46455b5580..e6c390dbf7 100644 --- a/config/examples/Anet/ET5/Configuration_adv.h +++ b/config/examples/Anet/ET5/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Anet/ET5X/Configuration_adv.h b/config/examples/Anet/ET5X/Configuration_adv.h index 46455b5580..e6c390dbf7 100644 --- a/config/examples/Anet/ET5X/Configuration_adv.h +++ b/config/examples/Anet/ET5X/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/AnyCubic/Chiron/Configuration_adv.h b/config/examples/AnyCubic/Chiron/Configuration_adv.h index 5181c1c1d0..b71ac7669d 100644 --- a/config/examples/AnyCubic/Chiron/Configuration_adv.h +++ b/config/examples/AnyCubic/Chiron/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h index 9f4d52a7db..5162f9791c 100644 --- a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h +++ b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h index 83d9c97db4..d08fcef401 100644 --- a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h +++ b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h index ec0584c18f..ae373cdc37 100644 --- a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h +++ b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/AnyCubic/i3 Mega/Configuration_adv.h b/config/examples/AnyCubic/i3 Mega/Configuration_adv.h index 5b87717df2..d457c717a0 100644 --- a/config/examples/AnyCubic/i3 Mega/Configuration_adv.h +++ b/config/examples/AnyCubic/i3 Mega/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/AnyCubic/i3/Configuration_adv.h b/config/examples/AnyCubic/i3/Configuration_adv.h index 7f8e26cdea..dd4b859ea0 100644 --- a/config/examples/AnyCubic/i3/Configuration_adv.h +++ b/config/examples/AnyCubic/i3/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/ArmEd/Configuration_adv.h b/config/examples/ArmEd/Configuration_adv.h index 4a502771f7..1a00c48b29 100644 --- a/config/examples/ArmEd/Configuration_adv.h +++ b/config/examples/ArmEd/Configuration_adv.h @@ -1530,33 +1530,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Artillery/Genius Pro/Configuration_adv.h b/config/examples/Artillery/Genius Pro/Configuration_adv.h index 4f96e89fbe..37a15be682 100644 --- a/config/examples/Artillery/Genius Pro/Configuration_adv.h +++ b/config/examples/Artillery/Genius Pro/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Artillery/Genius/BLTouch/Configuration_adv.h b/config/examples/Artillery/Genius/BLTouch/Configuration_adv.h index 01efb2538a..78797042bd 100644 --- a/config/examples/Artillery/Genius/BLTouch/Configuration_adv.h +++ b/config/examples/Artillery/Genius/BLTouch/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Artillery/Genius/V1/Configuration_adv.h b/config/examples/Artillery/Genius/V1/Configuration_adv.h index ab19809a8b..556ebe1da0 100644 --- a/config/examples/Artillery/Genius/V1/Configuration_adv.h +++ b/config/examples/Artillery/Genius/V1/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Artillery/Hornet/Configuration_adv.h b/config/examples/Artillery/Hornet/Configuration_adv.h index e718125596..46b174e8eb 100644 --- a/config/examples/Artillery/Hornet/Configuration_adv.h +++ b/config/examples/Artillery/Hornet/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h b/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h index 364916bfda..69fd06f5e6 100644 --- a/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h +++ b/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h b/config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h index ab19809a8b..556ebe1da0 100644 --- a/config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h +++ b/config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Artillery/Sidewinder X2/Configuration_adv.h b/config/examples/Artillery/Sidewinder X2/Configuration_adv.h index bd7a77b8fc..7c7050571d 100644 --- a/config/examples/Artillery/Sidewinder X2/Configuration_adv.h +++ b/config/examples/Artillery/Sidewinder X2/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Azteeg/X5GT/Configuration_adv.h b/config/examples/Azteeg/X5GT/Configuration_adv.h index 891079e60f..0358ac295d 100644 --- a/config/examples/Azteeg/X5GT/Configuration_adv.h +++ b/config/examples/Azteeg/X5GT/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h index 57ff46e6c5..ffd5abd5bf 100644 --- a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/BIBO/TouchX/default/Configuration_adv.h b/config/examples/BIBO/TouchX/default/Configuration_adv.h index af03e75c14..74d9aa0d2e 100644 --- a/config/examples/BIBO/TouchX/default/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/default/Configuration_adv.h @@ -1519,33 +1519,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/BIQU/B1 - SKR 1.4/Configuration_adv.h b/config/examples/BIQU/B1 - SKR 1.4/Configuration_adv.h index 90bb09c113..beadcc5bc8 100644 --- a/config/examples/BIQU/B1 - SKR 1.4/Configuration_adv.h +++ b/config/examples/BIQU/B1 - SKR 1.4/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - #define AUTO_REPORT_SD_STATUS + #define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/BIQU/B1 - SKR 2/Configuration_adv.h b/config/examples/BIQU/B1 - SKR 2/Configuration_adv.h index 6db10e0380..e9f6ec0f8c 100644 --- a/config/examples/BIQU/B1 - SKR 2/Configuration_adv.h +++ b/config/examples/BIQU/B1 - SKR 2/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - #define AUTO_REPORT_SD_STATUS + #define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/BIQU/B1 SE Plus/Configuration_adv.h b/config/examples/BIQU/B1 SE Plus/Configuration_adv.h index f6f3378d27..a7158fc5b7 100644 --- a/config/examples/BIQU/B1 SE Plus/Configuration_adv.h +++ b/config/examples/BIQU/B1 SE Plus/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - #define AUTO_REPORT_SD_STATUS + #define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/BIQU/BX/Configuration_adv.h b/config/examples/BIQU/BX/Configuration_adv.h index 343187817e..4666759fc6 100644 --- a/config/examples/BIQU/BX/Configuration_adv.h +++ b/config/examples/BIQU/BX/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/BQ/Hephestos/Configuration_adv.h b/config/examples/BQ/Hephestos/Configuration_adv.h index e79d1da293..a9977e31ce 100644 --- a/config/examples/BQ/Hephestos/Configuration_adv.h +++ b/config/examples/BQ/Hephestos/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/BQ/Hephestos_2/Configuration_adv.h b/config/examples/BQ/Hephestos_2/Configuration_adv.h index 59713a681b..6daf84e076 100644 --- a/config/examples/BQ/Hephestos_2/Configuration_adv.h +++ b/config/examples/BQ/Hephestos_2/Configuration_adv.h @@ -1534,33 +1534,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/BQ/WITBOX/Configuration_adv.h b/config/examples/BQ/WITBOX/Configuration_adv.h index e79d1da293..a9977e31ce 100644 --- a/config/examples/BQ/WITBOX/Configuration_adv.h +++ b/config/examples/BQ/WITBOX/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/CTC/A13/Configuration_adv.h b/config/examples/CTC/A13/Configuration_adv.h index 3f78ddee1c..a427e97902 100644 --- a/config/examples/CTC/A13/Configuration_adv.h +++ b/config/examples/CTC/A13/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Cartesio/Configuration_adv.h b/config/examples/Cartesio/Configuration_adv.h index d768532494..01500bf13f 100644 --- a/config/examples/Cartesio/Configuration_adv.h +++ b/config/examples/Cartesio/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index ff83e8428f..859b50f238 100644 --- a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h index 90864f35ae..88797463d0 100644 --- a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h index 7e1db44dc3..7010674fc9 100644 --- a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h index d48bfc8b61..c7a1fba65f 100644 --- a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h index 214ef821b0..7c5ccb02f5 100644 --- a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h index d48bfc8b61..c7a1fba65f 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration_adv.h b/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration_adv.h index 9c84f7f409..a54c778e37 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. #define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - #define AUTO_REPORT_SD_STATUS + #define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Creality/CR-10 V2/Configuration_adv.h b/config/examples/Creality/CR-10 V2/Configuration_adv.h index a46f6c48cf..c03821c4bd 100644 --- a/config/examples/Creality/CR-10 V2/Configuration_adv.h +++ b/config/examples/Creality/CR-10 V2/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - #define AUTO_REPORT_SD_STATUS + #define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Creality/CR-10 V3/Configuration_adv.h b/config/examples/Creality/CR-10 V3/Configuration_adv.h index 73fff85323..cd72b8f8f4 100644 --- a/config/examples/Creality/CR-10 V3/Configuration_adv.h +++ b/config/examples/Creality/CR-10 V3/Configuration_adv.h @@ -1528,33 +1528,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - #define AUTO_REPORT_SD_STATUS + #define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 3b5cf75567..7af56b5294 100644 --- a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ #define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h index 0c03b45a03..c0e3ec573d 100644 --- a/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h index 8d34477358..015523247a 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 524bfa7b62..82138ccf3f 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ #define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h index c5716c2491..0959f93905 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h index dc25918b32..8fc164e68c 100644 --- a/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Creality/CR-20 Pro/Configuration_adv.h b/config/examples/Creality/CR-20 Pro/Configuration_adv.h index 2863e443fc..7298f4a4b6 100644 --- a/config/examples/Creality/CR-20 Pro/Configuration_adv.h +++ b/config/examples/Creality/CR-20 Pro/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Creality/CR-20/Configuration_adv.h b/config/examples/Creality/CR-20/Configuration_adv.h index 8a6f7d7b57..faa6ef0f89 100644 --- a/config/examples/Creality/CR-20/Configuration_adv.h +++ b/config/examples/Creality/CR-20/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Creality/CR-30 PrintMill/Configuration_adv.h b/config/examples/Creality/CR-30 PrintMill/Configuration_adv.h index efbbc55520..0a2b0e673e 100644 --- a/config/examples/Creality/CR-30 PrintMill/Configuration_adv.h +++ b/config/examples/Creality/CR-30 PrintMill/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Creality/CR-6 SE/Configuration_adv.h b/config/examples/Creality/CR-6 SE/Configuration_adv.h index 6a1cd8d2bc..7d2058fdbc 100644 --- a/config/examples/Creality/CR-6 SE/Configuration_adv.h +++ b/config/examples/Creality/CR-6 SE/Configuration_adv.h @@ -1527,33 +1527,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Creality/CR-8/Configuration_adv.h b/config/examples/Creality/CR-8/Configuration_adv.h index 1b21827bdd..ee35ba1906 100644 --- a/config/examples/Creality/CR-8/Configuration_adv.h +++ b/config/examples/Creality/CR-8/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration_adv.h b/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration_adv.h index 61e0994ca6..7147a29587 100644 --- a/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration_adv.h +++ b/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration_adv.h @@ -1527,33 +1527,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Creality/Ender-2/Configuration_adv.h b/config/examples/Creality/Ender-2/Configuration_adv.h index ae21731cd6..c273dbb4ba 100644 --- a/config/examples/Creality/Ender-2/Configuration_adv.h +++ b/config/examples/Creality/Ender-2/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Creality/Ender-3 Max/Configuration_adv.h b/config/examples/Creality/Ender-3 Max/Configuration_adv.h index 36fcee739e..608eeb186e 100644 --- a/config/examples/Creality/Ender-3 Max/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Max/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h index f5b0ca5911..ff087f51f3 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. #define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h index 2b55fa7a93..8e546ff0f6 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index b3685a2983..ed0e3587df 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index fda96015c2..2824d205e1 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h index f1c5bdc2ce..9f0417a4fe 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h index 3065ecf55a..66c8fad150 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h @@ -1527,33 +1527,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h index 93df9f7850..2e7b99016b 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration_adv.h index bb699835a0..2c0741aab1 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration_adv.h @@ -1527,33 +1527,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration_adv.h index 75f26d2cc9..19ab46393b 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration_adv.h @@ -1527,33 +1527,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration_adv.h index 9cb96fd50a..89c5164b09 100644 --- a/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration_adv.h @@ -1527,33 +1527,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration_adv.h index 65209bb72e..5aa061b518 100644 --- a/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration_adv.h @@ -1527,33 +1527,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h index 7e2a0328b2..e7d0909752 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h index 469822145a..729ea35e77 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h index 7f1212abde..d24751eceb 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h index dff2ae66d5..2dcc4f3ea5 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h index 7f1212abde..d24751eceb 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h index e84a6aa305..fe76ed16e0 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h index 817674c660..07206a3e6b 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index 379c14b126..d42e92f6fb 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index d4685aaac4..6c5716f3a7 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h index cc1808178c..a4929ce6f8 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. #define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - #define AUTO_REPORT_SD_STATUS + #define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h index 97f0b72deb..efe878ebac 100644 --- a/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h index fe2693f9cb..e415e11144 100644 --- a/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h index 5ed2b03f85..d6b5dbc57a 100644 --- a/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h index 9099e3786c..ca805ac7ec 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h index 9099e3786c..ca805ac7ec 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h index 9099e3786c..ca805ac7ec 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h index 9099e3786c..ca805ac7ec 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h index 1cd8524fef..9aac681ce0 100644 --- a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h b/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h index 002929989c..22d7b13736 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h b/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h index c2278ec2a4..55991479eb 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h index 6d0be44b59..1e53caf043 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration_adv.h b/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration_adv.h index 0de95682c8..a7e2f64789 100644 --- a/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Creality/Ender-4/Configuration_adv.h b/config/examples/Creality/Ender-4/Configuration_adv.h index 87a1dd771f..f18fc06c5f 100644 --- a/config/examples/Creality/Ender-4/Configuration_adv.h +++ b/config/examples/Creality/Ender-4/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Creality/Ender-5 Plus/Configuration_adv.h b/config/examples/Creality/Ender-5 Plus/Configuration_adv.h index 8979c9c6f2..beb511341d 100644 --- a/config/examples/Creality/Ender-5 Plus/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Plus/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h index 394372fe53..ab59a7479f 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index 75cd09b952..5e5b727510 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h index b4f1b68810..26ed0d128c 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h index c1fbf04723..3b70237410 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h index dc0d69e76f..16fd8496d0 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h index 69aefb6bf6..5f9015aba2 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h index 8205777356..edc8ebf6b3 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h @@ -1530,33 +1530,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h index 394372fe53..ab59a7479f 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h index 5c3e163080..572b23a327 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index 379c14b126..d42e92f6fb 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 18299f1136..7d3e35b343 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h index e6ac987c04..1e526a15bb 100644 --- a/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h index 17c1f48d02..e01f0e2ca1 100644 --- a/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Creality/Ender-6/Configuration_adv.h b/config/examples/Creality/Ender-6/Configuration_adv.h index 1e02075646..c7374156a0 100644 --- a/config/examples/Creality/Ender-6/Configuration_adv.h +++ b/config/examples/Creality/Ender-6/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h index 9c2451de90..6bbdb6de3b 100644 --- a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h +++ b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - #define AUTO_REPORT_SD_STATUS + #define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Daycom/3DP-100/Configuration_adv.h b/config/examples/Daycom/3DP-100/Configuration_adv.h index 8a899d433d..815e062f9c 100644 --- a/config/examples/Daycom/3DP-100/Configuration_adv.h +++ b/config/examples/Daycom/3DP-100/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h b/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h index 6a60df13db..02b988b9fc 100644 --- a/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h +++ b/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - #define AUTO_REPORT_SD_STATUS + #define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/EasyThreeD/ET4000PLUS/Configuration_adv.h b/config/examples/EasyThreeD/ET4000PLUS/Configuration_adv.h index 11fd3960a2..fe78fa179a 100644 --- a/config/examples/EasyThreeD/ET4000PLUS/Configuration_adv.h +++ b/config/examples/EasyThreeD/ET4000PLUS/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Einstart-S/Configuration_adv.h b/config/examples/Einstart-S/Configuration_adv.h index 230f9db9cf..f47bfb83a2 100644 --- a/config/examples/Einstart-S/Configuration_adv.h +++ b/config/examples/Einstart-S/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Elegoo/Neptune 2/Configuration_adv.h b/config/examples/Elegoo/Neptune 2/Configuration_adv.h index ce4c1eda36..5567c2d2fb 100644 --- a/config/examples/Elegoo/Neptune 2/Configuration_adv.h +++ b/config/examples/Elegoo/Neptune 2/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. #define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Eryone/Thinker SE/Configuration_adv.h b/config/examples/Eryone/Thinker SE/Configuration_adv.h index fecd0fa9ed..ff6a2c11a4 100644 --- a/config/examples/Eryone/Thinker SE/Configuration_adv.h +++ b/config/examples/Eryone/Thinker SE/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Eryone/Thinker V2/Configuration_adv.h b/config/examples/Eryone/Thinker V2/Configuration_adv.h index 31e1f4e593..3dc9da0fea 100644 --- a/config/examples/Eryone/Thinker V2/Configuration_adv.h +++ b/config/examples/Eryone/Thinker V2/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/FYSETC/AIO_II/Configuration_adv.h b/config/examples/FYSETC/AIO_II/Configuration_adv.h index 00eecda624..c31321c81b 100644 --- a/config/examples/FYSETC/AIO_II/Configuration_adv.h +++ b/config/examples/FYSETC/AIO_II/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/FYSETC/F6_13/Configuration_adv.h b/config/examples/FYSETC/F6_13/Configuration_adv.h index 3a635ec0dc..cf715b3b9a 100644 --- a/config/examples/FYSETC/F6_13/Configuration_adv.h +++ b/config/examples/FYSETC/F6_13/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/FYSETC/S6/Configuration_adv.h b/config/examples/FYSETC/S6/Configuration_adv.h index 840a7fa027..4e4cb8c9c5 100644 --- a/config/examples/FYSETC/S6/Configuration_adv.h +++ b/config/examples/FYSETC/S6/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Felix/DUAL/Configuration_adv.h b/config/examples/Felix/DUAL/Configuration_adv.h index cd8342b348..9aea07c6a3 100644 --- a/config/examples/Felix/DUAL/Configuration_adv.h +++ b/config/examples/Felix/DUAL/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Felix/Single/Configuration_adv.h b/config/examples/Felix/Single/Configuration_adv.h index cd8342b348..9aea07c6a3 100644 --- a/config/examples/Felix/Single/Configuration_adv.h +++ b/config/examples/Felix/Single/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/FlashForge/Creator 2X/Configuration_adv.h b/config/examples/FlashForge/Creator 2X/Configuration_adv.h index 334a005690..560cf34e15 100644 --- a/config/examples/FlashForge/Creator 2X/Configuration_adv.h +++ b/config/examples/FlashForge/Creator 2X/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/FlashForge/CreatorPro/Configuration_adv.h b/config/examples/FlashForge/CreatorPro/Configuration_adv.h index 62d4c8c8ec..3e808c88fd 100644 --- a/config/examples/FlashForge/CreatorPro/Configuration_adv.h +++ b/config/examples/FlashForge/CreatorPro/Configuration_adv.h @@ -1525,33 +1525,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/FlyingBear/P902/Configuration_adv.h b/config/examples/FlyingBear/P902/Configuration_adv.h index e9c4afb7e3..8bfac9faa3 100644 --- a/config/examples/FlyingBear/P902/Configuration_adv.h +++ b/config/examples/FlyingBear/P902/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/FlyingBear/P905H/Configuration_adv.h b/config/examples/FlyingBear/P905H/Configuration_adv.h index e65c07d7f1..17ee4c5900 100644 --- a/config/examples/FlyingBear/P905H/Configuration_adv.h +++ b/config/examples/FlyingBear/P905H/Configuration_adv.h @@ -1529,33 +1529,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/FoamCutter/Configuration_adv.h b/config/examples/FoamCutter/Configuration_adv.h index 891079e60f..0358ac295d 100644 --- a/config/examples/FoamCutter/Configuration_adv.h +++ b/config/examples/FoamCutter/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/config/examples/FolgerTech/i3-2020/Configuration_adv.h index 4a214be9af..a8041f23e7 100644 --- a/config/examples/FolgerTech/i3-2020/Configuration_adv.h +++ b/config/examples/FolgerTech/i3-2020/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Formbot/Raptor/Configuration_adv.h b/config/examples/Formbot/Raptor/Configuration_adv.h index 7156d28469..0e3513cbc1 100644 --- a/config/examples/Formbot/Raptor/Configuration_adv.h +++ b/config/examples/Formbot/Raptor/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - #define AUTO_REPORT_SD_STATUS + #define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h index 219600894d..798fa9bd99 100644 --- a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h +++ b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - #define AUTO_REPORT_SD_STATUS + #define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Formbot/T_Rex_3/Configuration_adv.h b/config/examples/Formbot/T_Rex_3/Configuration_adv.h index 610bc1ba3e..b399877be5 100644 --- a/config/examples/Formbot/T_Rex_3/Configuration_adv.h +++ b/config/examples/Formbot/T_Rex_3/Configuration_adv.h @@ -1530,33 +1530,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - #define AUTO_REPORT_SD_STATUS + #define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Geeetech/A10/Configuration_adv.h b/config/examples/Geeetech/A10/Configuration_adv.h index d9b5724fe8..1fa3f34413 100644 --- a/config/examples/Geeetech/A10/Configuration_adv.h +++ b/config/examples/Geeetech/A10/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Geeetech/A10D/Configuration_adv.h b/config/examples/Geeetech/A10D/Configuration_adv.h index fc29cfe96d..7c0b28da83 100644 --- a/config/examples/Geeetech/A10D/Configuration_adv.h +++ b/config/examples/Geeetech/A10D/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Geeetech/A10M/Stock LCD/Configuration_adv.h b/config/examples/Geeetech/A10M/Stock LCD/Configuration_adv.h index c4904d83e4..8ac2c36c4b 100644 --- a/config/examples/Geeetech/A10M/Stock LCD/Configuration_adv.h +++ b/config/examples/Geeetech/A10M/Stock LCD/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration_adv.h b/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration_adv.h index c4904d83e4..8ac2c36c4b 100644 --- a/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration_adv.h +++ b/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Geeetech/A10PRO/Configuration_adv.h b/config/examples/Geeetech/A10PRO/Configuration_adv.h index d9b5724fe8..1fa3f34413 100644 --- a/config/examples/Geeetech/A10PRO/Configuration_adv.h +++ b/config/examples/Geeetech/A10PRO/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Geeetech/A10T/Stock LCD/Configuration_adv.h b/config/examples/Geeetech/A10T/Stock LCD/Configuration_adv.h index c4904d83e4..8ac2c36c4b 100644 --- a/config/examples/Geeetech/A10T/Stock LCD/Configuration_adv.h +++ b/config/examples/Geeetech/A10T/Stock LCD/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration_adv.h b/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration_adv.h index c4904d83e4..8ac2c36c4b 100644 --- a/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration_adv.h +++ b/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Geeetech/A20/Configuration_adv.h b/config/examples/Geeetech/A20/Configuration_adv.h index 3eb6d2a15c..8be6c1a542 100644 --- a/config/examples/Geeetech/A20/Configuration_adv.h +++ b/config/examples/Geeetech/A20/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Geeetech/A20M/Configuration_adv.h b/config/examples/Geeetech/A20M/Configuration_adv.h index 3eb6d2a15c..8be6c1a542 100644 --- a/config/examples/Geeetech/A20M/Configuration_adv.h +++ b/config/examples/Geeetech/A20M/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Geeetech/A20T/Configuration_adv.h b/config/examples/Geeetech/A20T/Configuration_adv.h index 3eb6d2a15c..8be6c1a542 100644 --- a/config/examples/Geeetech/A20T/Configuration_adv.h +++ b/config/examples/Geeetech/A20T/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Geeetech/A30/Configuration_adv.h b/config/examples/Geeetech/A30/Configuration_adv.h index dde41b29f9..a9e110c89a 100644 --- a/config/examples/Geeetech/A30/Configuration_adv.h +++ b/config/examples/Geeetech/A30/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Geeetech/A30M/Configuration_adv.h b/config/examples/Geeetech/A30M/Configuration_adv.h index dde41b29f9..a9e110c89a 100644 --- a/config/examples/Geeetech/A30M/Configuration_adv.h +++ b/config/examples/Geeetech/A30M/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Geeetech/A30T/Configuration_adv.h b/config/examples/Geeetech/A30T/Configuration_adv.h index dde41b29f9..a9e110c89a 100644 --- a/config/examples/Geeetech/A30T/Configuration_adv.h +++ b/config/examples/Geeetech/A30T/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Geeetech/D200/Configuration_adv.h b/config/examples/Geeetech/D200/Configuration_adv.h index db71a87c40..fd686d7907 100644 --- a/config/examples/Geeetech/D200/Configuration_adv.h +++ b/config/examples/Geeetech/D200/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Geeetech/Duplicator5/Configuration_adv.h b/config/examples/Geeetech/Duplicator5/Configuration_adv.h index 840a7fa027..4e4cb8c9c5 100644 --- a/config/examples/Geeetech/Duplicator5/Configuration_adv.h +++ b/config/examples/Geeetech/Duplicator5/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Geeetech/E180/Configuration_adv.h b/config/examples/Geeetech/E180/Configuration_adv.h index dde41b29f9..a9e110c89a 100644 --- a/config/examples/Geeetech/E180/Configuration_adv.h +++ b/config/examples/Geeetech/E180/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Geeetech/M201/Configuration_adv.h b/config/examples/Geeetech/M201/Configuration_adv.h index db71a87c40..fd686d7907 100644 --- a/config/examples/Geeetech/M201/Configuration_adv.h +++ b/config/examples/Geeetech/M201/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Geeetech/MeCreator2/Configuration_adv.h b/config/examples/Geeetech/MeCreator2/Configuration_adv.h index f9a4ada2c4..3bc1f68df1 100644 --- a/config/examples/Geeetech/MeCreator2/Configuration_adv.h +++ b/config/examples/Geeetech/MeCreator2/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Geeetech/Me_creator/Configuration_adv.h b/config/examples/Geeetech/Me_creator/Configuration_adv.h index 840a7fa027..4e4cb8c9c5 100644 --- a/config/examples/Geeetech/Me_creator/Configuration_adv.h +++ b/config/examples/Geeetech/Me_creator/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Geeetech/Me_ducer/Configuration_adv.h b/config/examples/Geeetech/Me_ducer/Configuration_adv.h index 188799d9b1..2ffead5f0c 100644 --- a/config/examples/Geeetech/Me_ducer/Configuration_adv.h +++ b/config/examples/Geeetech/Me_ducer/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Geeetech/PI3A PRO/Configuration_adv.h b/config/examples/Geeetech/PI3A PRO/Configuration_adv.h index fd9ff178da..d41f503e35 100644 --- a/config/examples/Geeetech/PI3A PRO/Configuration_adv.h +++ b/config/examples/Geeetech/PI3A PRO/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h index d9b5724fe8..1fa3f34413 100644 --- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h index d9b5724fe8..1fa3f34413 100644 --- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/HMS434/Configuration_adv.h b/config/examples/HMS434/Configuration_adv.h index e73cd5dd85..d2d10ed7d6 100644 --- a/config/examples/HMS434/Configuration_adv.h +++ b/config/examples/HMS434/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Index/REV_03/Configuration_adv.h b/config/examples/Index/REV_03/Configuration_adv.h index 951c4639ef..6f70dc153b 100644 --- a/config/examples/Index/REV_03/Configuration_adv.h +++ b/config/examples/Index/REV_03/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Infitary/i3-M508/Configuration_adv.h b/config/examples/Infitary/i3-M508/Configuration_adv.h index 9b44108b79..6ada1f27cb 100644 --- a/config/examples/Infitary/i3-M508/Configuration_adv.h +++ b/config/examples/Infitary/i3-M508/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h b/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h index e4ed2c679d..ee4937f623 100644 --- a/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h +++ b/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h @@ -1525,33 +1525,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - #define AUTO_REPORT_SD_STATUS + #define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/JGAurora/A1/Configuration_adv.h b/config/examples/JGAurora/A1/Configuration_adv.h index f608b69129..0476242672 100644 --- a/config/examples/JGAurora/A1/Configuration_adv.h +++ b/config/examples/JGAurora/A1/Configuration_adv.h @@ -1531,33 +1531,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/JGAurora/A5/Configuration_adv.h b/config/examples/JGAurora/A5/Configuration_adv.h index 80a2af4e17..5f80220491 100644 --- a/config/examples/JGAurora/A5/Configuration_adv.h +++ b/config/examples/JGAurora/A5/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/JGAurora/A5S/Configuration_adv.h b/config/examples/JGAurora/A5S/Configuration_adv.h index f608b69129..0476242672 100644 --- a/config/examples/JGAurora/A5S/Configuration_adv.h +++ b/config/examples/JGAurora/A5S/Configuration_adv.h @@ -1531,33 +1531,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/JGAurora/Magic/Configuration_adv.h b/config/examples/JGAurora/Magic/Configuration_adv.h index c1418b5e1e..303495757b 100644 --- a/config/examples/JGAurora/Magic/Configuration_adv.h +++ b/config/examples/JGAurora/Magic/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Kingroon/KP3/Configuration_adv.h b/config/examples/Kingroon/KP3/Configuration_adv.h index 9bf7c5c5c7..5f36502ea4 100644 --- a/config/examples/Kingroon/KP3/Configuration_adv.h +++ b/config/examples/Kingroon/KP3/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - #define AUTO_REPORT_SD_STATUS + #define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Labists/ET4/Configuration_adv.h b/config/examples/Labists/ET4/Configuration_adv.h index 17e35b9288..9a8ff485f8 100644 --- a/config/examples/Labists/ET4/Configuration_adv.h +++ b/config/examples/Labists/ET4/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ #define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/LulzBot/TAZ4/Configuration_adv.h b/config/examples/LulzBot/TAZ4/Configuration_adv.h index 189651a745..83a27fd918 100644 --- a/config/examples/LulzBot/TAZ4/Configuration_adv.h +++ b/config/examples/LulzBot/TAZ4/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/MBot/Cube/Configuration_adv.h b/config/examples/MBot/Cube/Configuration_adv.h index 70f563abc4..1e69abc03d 100644 --- a/config/examples/MBot/Cube/Configuration_adv.h +++ b/config/examples/MBot/Cube/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h b/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h index 5cf362b6e3..4fee80e8c0 100644 --- a/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h +++ b/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - #define AUTO_REPORT_SD_STATUS + #define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/MakerParts/Configuration_adv.h b/config/examples/MakerParts/Configuration_adv.h index d7ed09756f..e1e7e02ed6 100644 --- a/config/examples/MakerParts/Configuration_adv.h +++ b/config/examples/MakerParts/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ #define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - #define SD_REPRINT_LAST_SELECTED_FILE + #define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Malyan/M150/Configuration_adv.h b/config/examples/Malyan/M150/Configuration_adv.h index c6d1816cb8..af6caecf31 100644 --- a/config/examples/Malyan/M150/Configuration_adv.h +++ b/config/examples/Malyan/M150/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Malyan/M200/Configuration_adv.h b/config/examples/Malyan/M200/Configuration_adv.h index 03d54d77d6..7803100f54 100644 --- a/config/examples/Malyan/M200/Configuration_adv.h +++ b/config/examples/Malyan/M200/Configuration_adv.h @@ -1528,33 +1528,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/config/examples/Micromake/C1/enhanced/Configuration_adv.h index 82fb7e5a62..af7930c052 100644 --- a/config/examples/Micromake/C1/enhanced/Configuration_adv.h +++ b/config/examples/Micromake/C1/enhanced/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Mks/Robin/Configuration_adv.h b/config/examples/Mks/Robin/Configuration_adv.h index 891079e60f..0358ac295d 100644 --- a/config/examples/Mks/Robin/Configuration_adv.h +++ b/config/examples/Mks/Robin/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Mks/Sbase/Configuration_adv.h b/config/examples/Mks/Sbase/Configuration_adv.h index c64365ea60..5ef683d03b 100644 --- a/config/examples/Mks/Sbase/Configuration_adv.h +++ b/config/examples/Mks/Sbase/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Modix/Big60/Configuration_adv.h b/config/examples/Modix/Big60/Configuration_adv.h index e8afdbe583..eb2a55ea29 100644 --- a/config/examples/Modix/Big60/Configuration_adv.h +++ b/config/examples/Modix/Big60/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - #define AUTO_REPORT_SD_STATUS + #define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Nextion/Configuration_adv.h b/config/examples/Nextion/Configuration_adv.h index e7b032cfc8..274f01238b 100644 --- a/config/examples/Nextion/Configuration_adv.h +++ b/config/examples/Nextion/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Ortur 4/Configuration_adv.h b/config/examples/Ortur 4/Configuration_adv.h index 8605fb3776..97a5b19cd2 100644 --- a/config/examples/Ortur 4/Configuration_adv.h +++ b/config/examples/Ortur 4/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Polargraph/Configuration_adv.h b/config/examples/Polargraph/Configuration_adv.h index 8d14f0f9e9..e534663f25 100644 --- a/config/examples/Polargraph/Configuration_adv.h +++ b/config/examples/Polargraph/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Prusa/MK3/Configuration_adv.h b/config/examples/Prusa/MK3/Configuration_adv.h index 0730b97648..2ccc5d14cc 100644 --- a/config/examples/Prusa/MK3/Configuration_adv.h +++ b/config/examples/Prusa/MK3/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h index 41b9435ebd..f047d3d673 100644 --- a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h +++ b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Qidi/Qidi 1/Configuration_adv.h b/config/examples/Qidi/Qidi 1/Configuration_adv.h index 90312aca66..b812db4dab 100644 --- a/config/examples/Qidi/Qidi 1/Configuration_adv.h +++ b/config/examples/Qidi/Qidi 1/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Raiscube/A8r/Configuration_adv.h b/config/examples/Raiscube/A8r/Configuration_adv.h index 86d0b34937..38555291e4 100644 --- a/config/examples/Raiscube/A8r/Configuration_adv.h +++ b/config/examples/Raiscube/A8r/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/RapideLite/RL200/Configuration_adv.h b/config/examples/RapideLite/RL200/Configuration_adv.h index a6cff3e18c..e190381c18 100644 --- a/config/examples/RapideLite/RL200/Configuration_adv.h +++ b/config/examples/RapideLite/RL200/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Renkforce/RF100/Configuration_adv.h b/config/examples/Renkforce/RF100/Configuration_adv.h index 4bcd6526f5..48a93ae5fd 100644 --- a/config/examples/Renkforce/RF100/Configuration_adv.h +++ b/config/examples/Renkforce/RF100/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Renkforce/RF100XL/Configuration_adv.h b/config/examples/Renkforce/RF100XL/Configuration_adv.h index 4bcd6526f5..48a93ae5fd 100644 --- a/config/examples/Renkforce/RF100XL/Configuration_adv.h +++ b/config/examples/Renkforce/RF100XL/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Renkforce/RF100v2/Configuration_adv.h b/config/examples/Renkforce/RF100v2/Configuration_adv.h index 4bcd6526f5..48a93ae5fd 100644 --- a/config/examples/Renkforce/RF100v2/Configuration_adv.h +++ b/config/examples/Renkforce/RF100v2/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/RigidBot/Configuration_adv.h b/config/examples/RigidBot/Configuration_adv.h index 4408a3f8d7..95c4f21db0 100644 --- a/config/examples/RigidBot/Configuration_adv.h +++ b/config/examples/RigidBot/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/SCARA/MP_SCARA/Configuration_adv.h b/config/examples/SCARA/MP_SCARA/Configuration_adv.h index c79e3f2f1b..a43cb8852c 100644 --- a/config/examples/SCARA/MP_SCARA/Configuration_adv.h +++ b/config/examples/SCARA/MP_SCARA/Configuration_adv.h @@ -1523,33 +1523,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/SCARA/Morgan/Configuration_adv.h b/config/examples/SCARA/Morgan/Configuration_adv.h index dbfa2133f0..8807e780c8 100644 --- a/config/examples/SCARA/Morgan/Configuration_adv.h +++ b/config/examples/SCARA/Morgan/Configuration_adv.h @@ -1523,33 +1523,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h index 0ee421cbf9..e5e86e1dc9 100644 --- a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h +++ b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Sanguinololu/Configuration_adv.h b/config/examples/Sanguinololu/Configuration_adv.h index 537169d1c0..ce7a0e3af1 100644 --- a/config/examples/Sanguinololu/Configuration_adv.h +++ b/config/examples/Sanguinololu/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Simulator/Configuration_adv.h b/config/examples/Simulator/Configuration_adv.h index d44ca5b90a..45915465a6 100644 --- a/config/examples/Simulator/Configuration_adv.h +++ b/config/examples/Simulator/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration_adv.h b/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration_adv.h index 2643ff6ea8..1520927690 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration_adv.h @@ -1530,33 +1530,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index bc90ca2e0f..b60186e81d 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h b/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h index abdb765800..0a1161d21f 100644 --- a/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h b/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h index dc35252a11..0bae20c1cc 100644 --- a/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Sunlu/S8/Configuration_adv.h b/config/examples/Sunlu/S8/Configuration_adv.h index bef44adee1..bf816e6385 100644 --- a/config/examples/Sunlu/S8/Configuration_adv.h +++ b/config/examples/Sunlu/S8/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - #define AUTO_REPORT_SD_STATUS + #define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h b/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h index 1e2981ff97..eb1a3fd52a 100644 --- a/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h +++ b/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Tevo/Michelangelo/Configuration_adv.h b/config/examples/Tevo/Michelangelo/Configuration_adv.h index d216405053..c8939b9bad 100644 --- a/config/examples/Tevo/Michelangelo/Configuration_adv.h +++ b/config/examples/Tevo/Michelangelo/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Tevo/Nereus/Configuration_adv.h b/config/examples/Tevo/Nereus/Configuration_adv.h index 717e5dcf45..cf3d14d844 100644 --- a/config/examples/Tevo/Nereus/Configuration_adv.h +++ b/config/examples/Tevo/Nereus/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Tevo/Tarantula Pro/Configuration_adv.h b/config/examples/Tevo/Tarantula Pro/Configuration_adv.h index 0e1d5e78df..5d3644bd9a 100644 --- a/config/examples/Tevo/Tarantula Pro/Configuration_adv.h +++ b/config/examples/Tevo/Tarantula Pro/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h index 55d4639b3b..7f0e8b188d 100644 --- a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h +++ b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h index 55d4639b3b..7f0e8b188d 100644 --- a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h +++ b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/TheBorg/Configuration_adv.h b/config/examples/TheBorg/Configuration_adv.h index be2f0d3262..6a5cafe1ba 100644 --- a/config/examples/TheBorg/Configuration_adv.h +++ b/config/examples/TheBorg/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/TinyBoy2/Configuration_adv.h b/config/examples/TinyBoy2/Configuration_adv.h index 31dc44ecdf..b8633904a5 100644 --- a/config/examples/TinyBoy2/Configuration_adv.h +++ b/config/examples/TinyBoy2/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Tronxy/X3A/Configuration_adv.h b/config/examples/Tronxy/X3A/Configuration_adv.h index 8c7a1600ea..6ea22e807b 100644 --- a/config/examples/Tronxy/X3A/Configuration_adv.h +++ b/config/examples/Tronxy/X3A/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Tronxy/X5S-2E/Configuration_adv.h b/config/examples/Tronxy/X5S-2E/Configuration_adv.h index 9a5eeb5590..795ba0ed92 100644 --- a/config/examples/Tronxy/X5S-2E/Configuration_adv.h +++ b/config/examples/Tronxy/X5S-2E/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Tronxy/X5SA-2E/Configuration_adv.h b/config/examples/Tronxy/X5SA-2E/Configuration_adv.h index 98b0cffaff..1869fd1f6b 100644 --- a/config/examples/Tronxy/X5SA-2E/Configuration_adv.h +++ b/config/examples/Tronxy/X5SA-2E/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Tronxy/X5SA/Configuration_adv.h b/config/examples/Tronxy/X5SA/Configuration_adv.h index 58a46e985c..5e7d394b84 100644 --- a/config/examples/Tronxy/X5SA/Configuration_adv.h +++ b/config/examples/Tronxy/X5SA/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Two Trees/BlueR Plus/Configuration_adv.h b/config/examples/Two Trees/BlueR Plus/Configuration_adv.h index 92ca492f80..0a023a808a 100644 --- a/config/examples/Two Trees/BlueR Plus/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR Plus/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h b/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h index 81dfc04cf3..8ffa1b1898 100644 --- a/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h b/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h index 81dfc04cf3..8ffa1b1898 100644 --- a/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h b/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h index 81dfc04cf3..8ffa1b1898 100644 --- a/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h index 1b63a7277c..b576d6da6f 100644 --- a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h +++ b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h @@ -1532,33 +1532,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - #define AUTO_REPORT_SD_STATUS + #define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h b/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h index e77b440c34..02c0db4a51 100644 --- a/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h +++ b/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/UltiMachine/Archim1/Configuration_adv.h b/config/examples/UltiMachine/Archim1/Configuration_adv.h index 6e34b8a06f..da912bf065 100644 --- a/config/examples/UltiMachine/Archim1/Configuration_adv.h +++ b/config/examples/UltiMachine/Archim1/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/UltiMachine/Archim2/Configuration_adv.h b/config/examples/UltiMachine/Archim2/Configuration_adv.h index 981c3d1220..a27a4522b9 100644 --- a/config/examples/UltiMachine/Archim2/Configuration_adv.h +++ b/config/examples/UltiMachine/Archim2/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Ultimaker/Ultimaker 2/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker 2/Configuration_adv.h index 0481974fcd..5710e9dd72 100644 --- a/config/examples/Ultimaker/Ultimaker 2/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker 2/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h index 531ad7a05b..257b3f3236 100644 --- a/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration_adv.h index 28e64d9873..bf874cbc8c 100644 --- a/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - #define AUTO_REPORT_SD_STATUS + #define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/VORONDesign/Configuration_adv.h b/config/examples/VORONDesign/Configuration_adv.h index 3c248eb458..a7f2091e58 100644 --- a/config/examples/VORONDesign/Configuration_adv.h +++ b/config/examples/VORONDesign/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Velleman/K8200/Configuration_adv.h b/config/examples/Velleman/K8200/Configuration_adv.h index 402bd9fe17..f9244a800a 100644 --- a/config/examples/Velleman/K8200/Configuration_adv.h +++ b/config/examples/Velleman/K8200/Configuration_adv.h @@ -1539,33 +1539,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h b/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h index 1f664cece2..f6774551d3 100644 --- a/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h +++ b/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Velleman/K8400/Single-head/Configuration_adv.h b/config/examples/Velleman/K8400/Single-head/Configuration_adv.h index 1f664cece2..f6774551d3 100644 --- a/config/examples/Velleman/K8400/Single-head/Configuration_adv.h +++ b/config/examples/Velleman/K8400/Single-head/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/WASP/PowerWASP/Configuration_adv.h b/config/examples/WASP/PowerWASP/Configuration_adv.h index fcdc17cbb6..267f6d4bf5 100644 --- a/config/examples/WASP/PowerWASP/Configuration_adv.h +++ b/config/examples/WASP/PowerWASP/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h b/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h index 83b2b8ad7f..1e37bc51ae 100644 --- a/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h index eca6ffdf0c..96088372c2 100644 --- a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h @@ -1528,33 +1528,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h index 1b3bb58266..b07f030c77 100644 --- a/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h index f376d1b995..eb9047dc3b 100644 --- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Wanhao/Duplicator i3 Plus/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 Plus/Configuration_adv.h index 891079e60f..0358ac295d 100644 --- a/config/examples/Wanhao/Duplicator i3 Plus/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 Plus/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Weistek/wt150/Configuration_adv.h b/config/examples/Weistek/wt150/Configuration_adv.h index 3d6553a73a..bd26989241 100644 --- a/config/examples/Weistek/wt150/Configuration_adv.h +++ b/config/examples/Weistek/wt150/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Zonestar/P802M/Configuration_adv.h b/config/examples/Zonestar/P802M/Configuration_adv.h index 8efbc656f2..11a1517758 100644 --- a/config/examples/Zonestar/P802M/Configuration_adv.h +++ b/config/examples/Zonestar/P802M/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h index 86e22b40a1..b9f5e13a15 100644 --- a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h +++ b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h index 06158995c8..f8dd1e52ae 100644 --- a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h @@ -1529,33 +1529,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h index d5179f9b0b..d3a5ae2381 100644 --- a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h @@ -1528,33 +1528,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/delta/Anycubic/Predator/Configuration_adv.h b/config/examples/delta/Anycubic/Predator/Configuration_adv.h index 29e3e31d13..cd597bdbe9 100644 --- a/config/examples/delta/Anycubic/Predator/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Predator/Configuration_adv.h @@ -1529,33 +1529,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h index 3ddc6d1c47..e1a531b546 100644 --- a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h +++ b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h @@ -1528,33 +1528,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - #define AUTO_REPORT_SD_STATUS + #define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h index 3ddc6d1c47..e1a531b546 100644 --- a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h +++ b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h @@ -1528,33 +1528,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - #define AUTO_REPORT_SD_STATUS + #define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h index 3fd6f8a449..9720193b7a 100644 --- a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h +++ b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h @@ -1528,33 +1528,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h b/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h index 6cdf75bb84..158ceb9efd 100644 --- a/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h +++ b/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h @@ -1528,33 +1528,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h b/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h index 73bbd06d36..45b77feca4 100644 --- a/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h +++ b/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h @@ -1529,33 +1529,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h index e8d7b83ea9..af82992d15 100644 --- a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h +++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h @@ -1528,33 +1528,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/delta/FLSUN/kossel/Configuration_adv.h b/config/examples/delta/FLSUN/kossel/Configuration_adv.h index e8d7b83ea9..af82992d15 100644 --- a/config/examples/delta/FLSUN/kossel/Configuration_adv.h +++ b/config/examples/delta/FLSUN/kossel/Configuration_adv.h @@ -1528,33 +1528,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h index de8d5da819..49271aa8e4 100644 --- a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h +++ b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h @@ -1528,33 +1528,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/delta/Geeetech/G2/Configuration_adv.h b/config/examples/delta/Geeetech/G2/Configuration_adv.h index 861a638cac..20edac16c0 100644 --- a/config/examples/delta/Geeetech/G2/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2/Configuration_adv.h @@ -1528,33 +1528,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - #define AUTO_REPORT_SD_STATUS + #define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h b/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h index c947d7a5b0..b6791c4828 100644 --- a/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h @@ -1528,33 +1528,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - #define AUTO_REPORT_SD_STATUS + #define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/delta/Geeetech/G2S/Configuration_adv.h b/config/examples/delta/Geeetech/G2S/Configuration_adv.h index c947d7a5b0..b6791c4828 100644 --- a/config/examples/delta/Geeetech/G2S/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2S/Configuration_adv.h @@ -1528,33 +1528,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - #define AUTO_REPORT_SD_STATUS + #define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h b/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h index c947d7a5b0..b6791c4828 100644 --- a/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h @@ -1528,33 +1528,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - #define AUTO_REPORT_SD_STATUS + #define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h index c392c42b43..1456a626d3 100644 --- a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h +++ b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h @@ -1528,33 +1528,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h b/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h index 67438f419f..35f89dd0f6 100644 --- a/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h +++ b/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h @@ -1528,33 +1528,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/delta/MKS/SBASE/Configuration_adv.h b/config/examples/delta/MKS/SBASE/Configuration_adv.h index d59f67a1b1..cfd6bd8217 100644 --- a/config/examples/delta/MKS/SBASE/Configuration_adv.h +++ b/config/examples/delta/MKS/SBASE/Configuration_adv.h @@ -1528,33 +1528,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/delta/Malyan M300/Configuration_adv.h b/config/examples/delta/Malyan M300/Configuration_adv.h index 19252fd170..cd79c0e279 100644 --- a/config/examples/delta/Malyan M300/Configuration_adv.h +++ b/config/examples/delta/Malyan M300/Configuration_adv.h @@ -1528,33 +1528,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/delta/Tevo Little Monster/Configuration_adv.h b/config/examples/delta/Tevo Little Monster/Configuration_adv.h index d1f08856b8..3a210b33e8 100644 --- a/config/examples/delta/Tevo Little Monster/Configuration_adv.h +++ b/config/examples/delta/Tevo Little Monster/Configuration_adv.h @@ -1528,33 +1528,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/delta/generic/Configuration_adv.h b/config/examples/delta/generic/Configuration_adv.h index de8d5da819..49271aa8e4 100644 --- a/config/examples/delta/generic/Configuration_adv.h +++ b/config/examples/delta/generic/Configuration_adv.h @@ -1528,33 +1528,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/delta/kossel_clear/Configuration_adv.h b/config/examples/delta/kossel_clear/Configuration_adv.h index 3d4f62e696..685a0d60a0 100644 --- a/config/examples/delta/kossel_clear/Configuration_adv.h +++ b/config/examples/delta/kossel_clear/Configuration_adv.h @@ -1528,33 +1528,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/delta/kossel_xl/Configuration_adv.h b/config/examples/delta/kossel_xl/Configuration_adv.h index 8d03763df1..8af543d569 100644 --- a/config/examples/delta/kossel_xl/Configuration_adv.h +++ b/config/examples/delta/kossel_xl/Configuration_adv.h @@ -1528,33 +1528,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/config/examples/gCreate/gMax1.5+/Configuration_adv.h index 34847c2826..4a58dda892 100644 --- a/config/examples/gCreate/gMax1.5+/Configuration_adv.h +++ b/config/examples/gCreate/gMax1.5+/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - #define SD_REPRINT_LAST_SELECTED_FILE + #define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration_adv.h b/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration_adv.h index b3d3b2e169..a1b3288af2 100644 --- a/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration_adv.h +++ b/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/makibox/Configuration_adv.h b/config/examples/makibox/Configuration_adv.h index 262c906c13..f8e97832a2 100644 --- a/config/examples/makibox/Configuration_adv.h +++ b/config/examples/makibox/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or diff --git a/config/examples/tvrrug/Round2/Configuration_adv.h b/config/examples/tvrrug/Round2/Configuration_adv.h index 5ff5a9c18a..9aa11e9318 100644 --- a/config/examples/tvrrug/Round2/Configuration_adv.h +++ b/config/examples/tvrrug/Round2/Configuration_adv.h @@ -1526,33 +1526,23 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN + //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. + * Abort SD printing when any endstop is triggered. + * This feature is enabled with 'M540 S1' or from the LCD menu. + * Endstops must be activated for this option to work. */ //#define SD_ABORT_ON_ENDSTOP_HIT - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE + //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS + //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or