mirror of
https://github.com/MarlinFirmware/Configurations.git
synced 2025-07-11 08:47:54 -06:00
Tweak a config comment
This commit is contained in:
parent
47ac38a077
commit
5b87298b69
138 changed files with 138 additions and 138 deletions
|
@ -819,7 +819,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -819,7 +819,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -819,7 +819,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -819,7 +819,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -819,7 +819,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -820,7 +820,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -819,7 +819,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -819,7 +819,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -819,7 +819,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -819,7 +819,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -819,7 +819,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -819,7 +819,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -819,7 +819,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -819,7 +819,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -819,7 +819,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -819,7 +819,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -823,7 +823,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -819,7 +819,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -819,7 +819,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -819,7 +819,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -819,7 +819,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -819,7 +819,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -819,7 +819,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -819,7 +819,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -819,7 +819,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -819,7 +819,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -819,7 +819,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -819,7 +819,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -819,7 +819,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -819,7 +819,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -819,7 +819,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -819,7 +819,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -819,7 +819,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -819,7 +819,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -819,7 +819,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -819,7 +819,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -819,7 +819,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -819,7 +819,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -819,7 +819,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -819,7 +819,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -819,7 +819,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -819,7 +819,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -819,7 +819,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -819,7 +819,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -819,7 +819,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -819,7 +819,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -819,7 +819,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -819,7 +819,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -819,7 +819,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -819,7 +819,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -819,7 +819,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -819,7 +819,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -819,7 +819,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -819,7 +819,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -823,7 +823,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -823,7 +823,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -819,7 +819,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -819,7 +819,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -819,7 +819,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -819,7 +819,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -819,7 +819,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -819,7 +819,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -819,7 +819,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -819,7 +819,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -819,7 +819,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -819,7 +819,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -819,7 +819,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -819,7 +819,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -819,7 +819,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -819,7 +819,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -819,7 +819,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -819,7 +819,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -819,7 +819,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -819,7 +819,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -811,7 +811,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -819,7 +819,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -824,7 +824,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -819,7 +819,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -824,7 +824,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -819,7 +819,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -819,7 +819,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -819,7 +819,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -819,7 +819,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -821,7 +821,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -819,7 +819,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -819,7 +819,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -819,7 +819,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -819,7 +819,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -819,7 +819,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -819,7 +819,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -819,7 +819,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -819,7 +819,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -819,7 +819,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -816,7 +816,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -816,7 +816,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -819,7 +819,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -819,7 +819,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -819,7 +819,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -819,7 +819,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
|
@ -819,7 +819,7 @@
|
||||||
// probing on a screwhead or hollow washer, probe near the edges.
|
// probing on a screwhead or hollow washer, probe near the edges.
|
||||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||||
|
|
||||||
// Define pin which is read during calibration
|
// Define the pin to read during calibration
|
||||||
#ifndef CALIBRATION_PIN
|
#ifndef CALIBRATION_PIN
|
||||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||||
|
|
Some files were not shown because too many files have changed in this diff Show more
Loading…
Add table
Add a link
Reference in a new issue