✨ Sovol SV-05 (#997)

config/examples/Sovol/SV-05/_Statusscreen.h

@@ -0,0 +1,65 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2023 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * Custom Status Screen bitmap
+ *
+ * Place this file in the root with your configuration files
+ * and enable CUSTOM_STATUS_SCREEN_IMAGE in Configuration.h.
+ *
+ * Use the Marlin Bitmap Converter to make your own:
+ * https://marlinfw.org/tools/u8glib/converter.html
+ */
+
+//
+// Status Screen Logo bitmap
+//
+#define STATUS_LOGO_Y            6
+#define STATUS_LOGO_WIDTH       40
+
+const unsigned char status_logo_bmp[] PROGMEM = {
+  B00011111,B00011110,B01111001,B11110001,B11111100,
+  B00110001,B10001100,B00110011,B10011001,B10000000,
+  B00110000,B00001100,B00110011,B00011001,B10000000,
+  B00110000,B00001100,B01100011,B00011001,B10000000,
+  B00011000,B00000110,B01100011,B00011001,B11111000,
+  B00001111,B00000110,B01100011,B00011000,B00001100,
+  B00000001,B10000110,B11000011,B00011000,B00001100,
+  B00000000,B11000110,B11000011,B00011000,B00001100,
+  B00110000,B11000011,B10000011,B00011001,B10001100,
+  B00110000,B11000011,B10000011,B10011001,B10001100,
+  B00011111,B10000011,B10000001,B11110000,B11111000
+};
+
+//
+// Use default bitmaps
+//
+#define STATUS_HOTEND_ANIM
+#define STATUS_BED_ANIM
+#define STATUS_HEATERS_XSPACE   20
+#if HOTENDS < 2
+  #define STATUS_HEATERS_X      48
+  #define STATUS_BED_X          73
+#else
+  #define STATUS_HEATERS_X      40
+  #define STATUS_BED_X          81
+#endif