3D-printing/Configurations
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Configurations.git synced 2025-08-06 21:44:14 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions

Improve BlueR configs (#334)

Browse source
This commit is contained in:
ils15 2020-11-30 03:23:42 -03:00 • committed by GitHub
parent ee747d0001
commit 5a9486fff0
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
7 changed files with 117 additions and 48 deletions
Download patch file Download diff file Expand all files Collapse all files

44
config/examples/Two Trees/BlueR/BlueR V3/Configuration.h
View file

@ -22,6 +22,7 @@
#pragma once
//#define BLUER_TMC2209 // Enable for the TMC2209 driver version
//#define BLUER_BLTOUCH // Enable if you want to use BLTOUCH
/**
* Configuration.h
@ -676,7 +677,7 @@
* TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE']
*/
#ifdef BLUER_TMC2209
#if ENABLED(BLUER_TMC2209)
#define X_DRIVER_TYPE TMC2209_STANDALONE
#define Y_DRIVER_TYPE TMC2209_STANDALONE
#define Z_DRIVER_TYPE TMC2209_STANDALONE
@ -690,7 +691,7 @@
//#define Z2_DRIVER_TYPE A4988
//#define Z3_DRIVER_TYPE A4988
//#define Z4_DRIVER_TYPE A4988
#ifdef BLUER_TMC2209
#if ENABLED(BLUER_TMC2209)
#define E0_DRIVER_TYPE TMC2209_STANDALONE
#else
#define E0_DRIVER_TYPE A4988
@ -749,7 +750,11 @@
* Override with M92
* X, Y, Z, E0 [, E1[, E2...]]
*/
#define DEFAULT_AXIS_STEPS_PER_UNIT { 160, 160, 400, 415 }
#if ENABLED(BLUER_TMC2209)
#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 415 }
#else
#define DEFAULT_AXIS_STEPS_PER_UNIT { 160, 160, 400, 415 }
#endif
/**
* Default Max Feed Rate (mm/s)
@ -784,8 +789,8 @@
* M204 R Retract Acceleration
* M204 T Travel Acceleration
*/
#define DEFAULT_ACCELERATION 750 // X, Y, Z and E acceleration for printing moves
#define DEFAULT_RETRACT_ACCELERATION 2000 // E acceleration for retracts
#define DEFAULT_ACCELERATION 750 // X, Y, Z and E acceleration for printing moves
#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves
/**
@ -849,7 +854,9 @@
* The probe replaces the Z-MIN endstop and is used for Z homing.
* (Automatically enables USE_PROBE_FOR_Z_HOMING.)
*/
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
#if ENABLED(BLUER_BLTOUCH)
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
#endif
// Force the use of the probe for Z-axis homing
//#define USE_PROBE_FOR_Z_HOMING
@ -907,7 +914,9 @@
/**
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
#if ENABLED(BLUER_BLTOUCH)
#define BLTOUCH
#endif
/**
* Pressure sensor with a BLTouch-like interface
@ -1096,7 +1105,7 @@
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
#define INVERT_X_DIR false
#define INVERT_Y_DIR false
#ifdef BLUER_TMC2209
#if ENABLED(BLUER_TMC2209)
#define INVERT_Z_DIR false
#else
#define INVERT_Z_DIR true
@ -1105,7 +1114,7 @@
// @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false.
#ifdef BLUER_TMC2209
#if ENABLED(BLUER_TMC2209)
#define INVERT_E0_DIR false
#else
#define INVERT_E0_DIR true
@ -1124,10 +1133,10 @@
//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated. Also enable NO_MOTION_BEFORE_HOMING for extra safety.
//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off.
#define Z_HOMING_HEIGHT 10 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ...
#define Z_HOMING_HEIGHT 10 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ...
// Be sure to have this much clearance over your Z_MAX_POS to prevent grinding.
#define Z_AFTER_HOMING 15 // (mm) Height to move to after homing Z
#define Z_AFTER_HOMING 15 // (mm) Height to move to after homing Z
// Direction of endstops when homing; 1=MAX, -1=MIN
// :[-1,1]
@ -1232,6 +1241,7 @@
//#define FIL_RUNOUT8_STATE LOW
//#define FIL_RUNOUT8_PULLUP
//#define FIL_RUNOUT8_PULLDOWN
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
#define FILAMENT_RUNOUT_SCRIPT "M600"
@ -1289,10 +1299,12 @@
*/
//#define AUTO_BED_LEVELING_3POINT
//#define AUTO_BED_LEVELING_LINEAR
//#define AUTO_BED_LEVELING_BILINEAR
//#define AUTO_BED_LEVELING_UBL
#define MESH_BED_LEVELING
#if ENABLED(BLUER_BLTOUCH)
#define AUTO_BED_LEVELING_BILINEAR
#else
#define MESH_BED_LEVELING
#endif
/**
* Normally G28 leaves leveling disabled on completion. Enable
* this option to have G28 restore the prior leveling state.
@ -1449,7 +1461,9 @@
// - Move the Z probe (or nozzle) to a defined XY point before Z Homing.
// - Prevent Z homing when the Z probe is outside bed area.
//
//#define Z_SAFE_HOMING
#if ENABLED(BLUER_BLTOUCH)
#define Z_SAFE_HOMING
#endif
#if ENABLED(Z_SAFE_HOMING)
#define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing