3D-printing/Configurations
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Configurations.git synced 2025-08-08 06:24:04 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions

📝 Improve, clean up READMEs (#988)

Browse source
This commit is contained in:
Keith Bennett 2023-11-14 02:51:08 -08:00 • committed by GitHub
parent 41c598df02
commit 58f3843bc6
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
18 changed files with 78 additions and 89 deletions
Download patch file Download diff file Expand all files Collapse all files

9
config/examples/delta/Anycubic/Kossel/README.md
View file

@ -6,7 +6,8 @@ These configurations activate many of the new advanced features of the Marlin fi
* Auto Bed Leveling
* Pause & Filament Change
**Important**: Before doing anything else after updating the firmware, go to `Configuration > Advanced Settings > Initialize EEPROM` to get rid of old configurations.
> [!IMPORTANT]
> Before doing anything else after updating the firmware, go to `Configuration > Advanced Settings > Initialize EEPROM` to get rid of old configurations.
Then you should execute `Configuration > Delta Calibration > Set Delta Height` and also run `Configuration > Delta Configuration > Probe Z-offset` to verify the Probe offset.
@ -19,7 +20,8 @@ Please do a manual paper test (moving the nozzle slowly down to Z0 and checking
# Select the Configuration
**Please select the correct values at the start of the Configuration.h file**
> [!IMPORTANT]
> Please select the correct values at the start of the Configuration.h file
The Kossel comes in 3 versions:
@ -39,7 +41,8 @@ Typically the probes for the Anycubic Delta Kossel printers come in two differen
![Version 2 Probe](images/Version2Probe.jpg)
If you select the `ANYCUBIC_PROBE_VERSION 0`: It's very important to follow the correct procedure to set it up after flashing the firmware, otherwise you might damage the printer by ramming the nozzle into the buildplate:
> [!IMPORTANT]
> If you select the `ANYCUBIC_PROBE_VERSION 0`, it's very important to follow the correct procedure to set it up after flashing the firmware, otherwise you might damage the printer by ramming the nozzle into the buildplate:
* `Configuration > Advanced Settings > Initialize EEPROM`
* `Motion > Move Axis > Soft Endstops` : `Off`