3D-printing/Configurations
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Configurations.git synced 2025-08-08 22:35:18 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions

📝 Improve, clean up READMEs (#988)

Browse source
This commit is contained in:
Keith Bennett 2023-11-14 02:51:08 -08:00 • committed by GitHub
parent 41c598df02
commit 58f3843bc6
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
18 changed files with 78 additions and 89 deletions
Download patch file Download diff file Expand all files Collapse all files

13
config/examples/Creality/Ender-5 Plus/BigTreeTech SKR 3/README.md
View file

@ -1,9 +1,14 @@
# Ender-5 Plus with BTT SKR 3 Configurations for Marlin Firmware
## Important
The LCD will need the cable modified to fit the SKR 3 motherboard.
Four pins, tx2-pa10 rx2-pa9 gnd-g 5v-+5v, ( See the boards silkscreens for pin labels)
> [!IMPORTANT]
> LCD cable will need to be modified to fit the SKR 3 motherboard (See board silkscreens for pin labels):
>
> | LCD -> SKR 3 |
> |-----------------|
> | `TX2` -> `PA10` |
> | `RX2` -> `PA9` |
> | `GND` -> `G` |
> | `5V` -> `+5V` |
## About

5
config/examples/Creality/Ender-5 Plus/CrealityV1 (ORIGIN UI)/README.md
View file

@ -1,8 +1,7 @@
# Ender-5 Plus Configurations for Marlin Firmware
## Important
NOTE: The Ender-5 LCD stock firmware is only compatible with Creality firmware. The LCD standard UI will not function. This is expected.
> [!IMPORTANT]
> The Ender-5 LCD stock firmware is only compatible with Creality firmware. The LCD standard UI will not function. This is expected.
## Marlin DGUS UI Instructions

7
config/examples/Creality/Ender-5 Plus/CrealityV1 (RELOADED UI)/README.md
View file

@ -1,8 +1,7 @@
# Ender-5 Plus Configurations for Marlin Firmware
## Important
NOTE: The Ender-5 LCD stock firmware is only compatible with Creality firmware. The LCD standard UI will not function. This is expected. With the stock LCD firmware Marlin can only be controlled from a host over USB.
> [!IMPORTANT]
> The Ender-5 LCD stock firmware is only compatible with Creality firmware. The LCD standard UI will not function. This is expected. With the stock LCD firmware Marlin can only be controlled from a host over USB.
## Marlin DGUS UI "Reloaded" Instructions
@ -32,4 +31,4 @@ The Ender-5 stock LCD can optionally use a customized Marlin DGUS interface. To
## Restoring Factory Firmware
The original firmware can be restored by downloading the [Ender 5 Plus firmware](https://www.creality.com/download) from Creality. You can follow the same LCD flashing procedure using the Creality-provided `DWIN_SET` folder.
The original firmware can be restored by downloading the [Ender 5 Plus firmware](https://www.creality.com/download) from Creality. You can follow the same LCD flashing procedure using the Creality-provided `DWIN_SET` folder.