3D-printing/Configurations
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Configurations.git synced 2025-07-11 08:47:54 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions

✨ PELTIER_BED (2)

Browse source
This commit is contained in:
Scott Lahteine 2024-10-13 01:50:10 -05:00
parent bbfbae3c06
commit 566d9150df
376 changed files with 379 additions and 379 deletions
Download patch file Download diff file Expand all files Collapse all files

2
config/default/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/3DFabXYZ/Migbot/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/3DMatik/XL/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/ADIMLab/Gantry v1/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/ADIMLab/Gantry v2/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/Alfawise/U20-bltouch/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/Alfawise/U20/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/AliExpress/CL-260/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/AliExpress/UM2pExt/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/Anet/A2/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/Anet/A2plus/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/Anet/A6/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/Anet/A8/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/Anet/A8plus/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/Anet/A9/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/Anet/E10/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/Anet/E16/Stock/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/Anet/ET4+/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/Anet/ET4-Pro/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/Anet/ET4/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/Anet/ET4X/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/Anet/ET5-Pro/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/Anet/ET5/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/Anet/ET5X/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/AnyCubic/Chiron/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/AnyCubic/Vyper/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/AnyCubic/i3/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/ArmEd/Configuration_adv.h
View file

@ -208,7 +208,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/Artillery/Genius Pro/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/Artillery/Genius/BLTouch/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/Artillery/Genius/V1/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/Artillery/Hornet/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/Artillery/Sidewinder X2/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/Azteeg/X5GT/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/BIBO/TouchX/default - BLTouch/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/BIBO/TouchX/default/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/BIQU/B1 SE Plus/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/BIQU/B1 SE/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/BIQU/B1/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/BIQU/BX/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/BIQU/Hurakan/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/BIQU/Thunder Standard/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/BQ/Hephestos/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/BQ/Hephestos_2/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/BQ/WITBOX/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/CNC/miniRambo/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/CTC/A13/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/CTC/Bizer/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/CTC/i3 2560 Rev A/no probe/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/Cartesio/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/Copymaster3D/300/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/Copymaster3D/400/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/Copymaster3D/500/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/Creality/CR-10 Max/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/Creality/CR-10 S5/CrealityV2.2 - BLTouch/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/Creality/CR-10 S5/CrealityV427 - BLTouch/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/Creality/CR-10 V2/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/Creality/CR-10 V3/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/Creality/CR-10S Pro/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/Creality/CR-10S/CrealityV1 - BLTouch/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/Creality/CR-20 Pro/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/Creality/CR-20/Stock/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/Creality/CR-30 PrintMill/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/Creality/CR-6 SE/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/Creality/CR-8/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/Creality/Ender-2 Pro/CrealityV24S4/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/Creality/Ender-2/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/Creality/Ender-3 Max Neo/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/Creality/Ender-3 Max/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/Creality/Ender-3 Neo/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

2
config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h
View file

@ -203,7 +203,7 @@
//
#if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING)
#if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
#define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
#endif
#endif

Some files were not shown because too many files have changed in this diff Show more