3D-printing/Configurations
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Configurations.git synced 2025-07-12 17:27:55 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions 1

🔧 Options for USE_TEMP_EXT_COMPENSATION

Browse source 
MarlinFirmware/Marlin#23007
This commit is contained in:
Scott Lahteine 2021-10-25 00:33:02 -05:00
parent f2e8ecc3e9
commit 53b87106c5
259 changed files with 1813 additions and 259 deletions
Download patch file Download diff file Expand all files Collapse all files

8
config/default/Configuration_adv.h
View file

@ -2006,7 +2006,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2022,6 +2022,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/3DFabXYZ/Migbot/Configuration_adv.h
View file

@ -2006,7 +2006,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2022,6 +2022,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/ADIMLab/Gantry v1/Configuration_adv.h
View file

@ -2006,7 +2006,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2022,6 +2022,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/ADIMLab/Gantry v2/Configuration_adv.h
View file

@ -2006,7 +2006,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2022,6 +2022,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/Alfawise/U20-bltouch/Configuration_adv.h
View file

@ -2016,7 +2016,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2032,6 +2032,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/Alfawise/U20/Configuration_adv.h
View file

@ -2007,7 +2007,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2023,6 +2023,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/AliExpress/UM2pExt/Configuration_adv.h
View file

@ -2006,7 +2006,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2022,6 +2022,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/Anet/A2/Configuration_adv.h
View file

@ -2006,7 +2006,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2022,6 +2022,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/Anet/A2plus/Configuration_adv.h
View file

@ -2006,7 +2006,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2022,6 +2022,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/Anet/A6/Configuration_adv.h
View file

@ -2006,7 +2006,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2022,6 +2022,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/Anet/A8/Configuration_adv.h
View file

@ -2006,7 +2006,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2022,6 +2022,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/Anet/A8plus/Configuration_adv.h
View file

@ -2006,7 +2006,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2022,6 +2022,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/Anet/A9/Configuration_adv.h
View file

@ -2006,7 +2006,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2022,6 +2022,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/Anet/E10/Configuration_adv.h
View file

@ -2006,7 +2006,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2022,6 +2022,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h
View file

@ -2006,7 +2006,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2022,6 +2022,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/Anet/E16/Stock/Configuration_adv.h
View file

@ -2006,7 +2006,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2022,6 +2022,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/Anet/ET4+/Configuration_adv.h
View file

@ -2006,7 +2006,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2022,6 +2022,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/Anet/ET4-Pro/Configuration_adv.h
View file

@ -2006,7 +2006,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2022,6 +2022,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/Anet/ET4/Configuration_adv.h
View file

@ -2006,7 +2006,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2022,6 +2022,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/Anet/ET4X/Configuration_adv.h
View file

@ -2006,7 +2006,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2022,6 +2022,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/Anet/ET5-Pro/Configuration_adv.h
View file

@ -2006,7 +2006,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2022,6 +2022,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/Anet/ET5/Configuration_adv.h
View file

@ -2006,7 +2006,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2022,6 +2022,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/Anet/ET5X/Configuration_adv.h
View file

@ -2006,7 +2006,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2022,6 +2022,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/AnyCubic/Chiron/Configuration_adv.h
View file

@ -2006,7 +2006,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2022,6 +2022,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h
View file

@ -2006,7 +2006,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2022,6 +2022,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h
View file

@ -2006,7 +2006,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2022,6 +2022,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h
View file

@ -2006,7 +2006,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2022,6 +2022,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/AnyCubic/i3 Mega/Configuration_adv.h
View file

@ -2006,7 +2006,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2022,6 +2022,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/AnyCubic/i3/Configuration_adv.h
View file

@ -2006,7 +2006,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2022,6 +2022,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/ArmEd/Configuration_adv.h
View file

@ -2010,7 +2010,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2026,6 +2026,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/Artillery/Genius/Configuration_adv.h
View file

@ -2006,7 +2006,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2022,6 +2022,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/Artillery/Sidewinder X1/Configuration_adv.h
View file

@ -2006,7 +2006,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2022,6 +2022,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration_adv.h
View file

@ -2006,7 +2006,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2022,6 +2022,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/Azteeg/X5GT/Configuration_adv.h
View file

@ -2006,7 +2006,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2022,6 +2022,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
View file

@ -2006,7 +2006,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2022,6 +2022,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/BIBO/TouchX/default/Configuration_adv.h
View file

@ -1999,7 +1999,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2015,6 +2015,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/BIQU/B1-BLTouch/Configuration_adv.h
View file

@ -2006,7 +2006,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2022,6 +2022,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/BIQU/B1/Configuration_adv.h
View file

@ -2006,7 +2006,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2022,6 +2022,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/BQ/Hephestos/Configuration_adv.h
View file

@ -2006,7 +2006,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2022,6 +2022,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/BQ/Hephestos_2/Configuration_adv.h
View file

@ -2014,7 +2014,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2030,6 +2030,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/BQ/WITBOX/Configuration_adv.h
View file

@ -2006,7 +2006,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2022,6 +2022,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/CTC/A13/Configuration_adv.h
View file

@ -2006,7 +2006,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2022,6 +2022,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/Cartesio/Configuration_adv.h
View file

@ -2006,7 +2006,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2022,6 +2022,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h
View file

@ -2006,7 +2006,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2022,6 +2022,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h
View file

@ -2006,7 +2006,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2022,6 +2022,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h
View file

@ -2006,7 +2006,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2022,6 +2022,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h
View file

@ -2006,7 +2006,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2022,6 +2022,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h
View file

@ -2006,7 +2006,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2022,6 +2022,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h
View file

@ -2006,7 +2006,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2022,6 +2022,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration_adv.h
View file

@ -2006,7 +2006,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2022,6 +2022,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/Creality/CR-10 V2/Configuration_adv.h
View file

@ -2012,7 +2012,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2028,6 +2028,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/Creality/CR-10 V3/Configuration_adv.h
View file

@ -2014,7 +2014,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2030,6 +2030,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h
View file

@ -2006,7 +2006,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2022,6 +2022,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h
View file

@ -2006,7 +2006,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2022,6 +2022,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h
View file

@ -2006,7 +2006,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2022,6 +2022,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h
View file

@ -2006,7 +2006,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2022,6 +2022,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h
View file

@ -2006,7 +2006,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2022,6 +2022,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h
View file

@ -2006,7 +2006,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2022,6 +2022,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/Creality/CR-20 Pro/Configuration_adv.h
View file

@ -2006,7 +2006,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2022,6 +2022,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/Creality/CR-20/Configuration_adv.h
View file

@ -2006,7 +2006,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2022,6 +2022,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/Creality/CR-30 PrintMill/Configuration_adv.h
View file

@ -2006,7 +2006,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2022,6 +2022,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/Creality/CR-6 SE/Configuration_adv.h
View file

@ -2007,7 +2007,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2023,6 +2023,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/Creality/CR-8/Configuration_adv.h
View file

@ -2006,7 +2006,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2022,6 +2022,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/Creality/Ender-2/Configuration_adv.h
View file

@ -2006,7 +2006,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2022,6 +2022,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/Creality/Ender-3 Max/Configuration_adv.h
View file

@ -2007,7 +2007,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2023,6 +2023,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h
View file

@ -2006,7 +2006,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2022,6 +2022,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h
View file

@ -2006,7 +2006,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2022,6 +2022,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h
View file

@ -2006,7 +2006,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2022,6 +2022,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h
View file

@ -2006,7 +2006,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2022,6 +2022,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h
View file

@ -2006,7 +2006,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2022,6 +2022,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h
View file

@ -2007,7 +2007,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2023,6 +2023,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h
View file

@ -2006,7 +2006,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2022,6 +2022,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/Creality/Ender-3 V2/CrealityUI/Configuration_adv.h
View file

@ -2007,7 +2007,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2023,6 +2023,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/Creality/Ender-3 V2/MarlinUI/Configuration_adv.h
View file

@ -2007,7 +2007,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2023,6 +2023,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h
View file

@ -2006,7 +2006,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2022,6 +2022,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h
View file

@ -2006,7 +2006,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2022,6 +2022,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h
View file

@ -2006,7 +2006,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2022,6 +2022,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h
View file

@ -2006,7 +2006,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2022,6 +2022,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h
View file

@ -2006,7 +2006,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2022,6 +2022,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h
View file

@ -2006,7 +2006,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2022,6 +2022,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h
View file

@ -2006,7 +2006,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2022,6 +2022,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h
View file

@ -2006,7 +2006,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2022,6 +2022,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h
View file

@ -2006,7 +2006,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2022,6 +2022,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h
View file

@ -2006,7 +2006,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2022,6 +2022,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h
View file

@ -2006,7 +2006,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2022,6 +2022,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h
View file

@ -2006,7 +2006,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2022,6 +2022,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h
View file

@ -2006,7 +2006,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2022,6 +2022,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h
View file

@ -2006,7 +2006,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2022,6 +2022,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h
View file

@ -2006,7 +2006,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2022,6 +2022,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h
View file

@ -2006,7 +2006,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2022,6 +2022,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h
View file

@ -2006,7 +2006,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2022,6 +2022,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h
View file

@ -2006,7 +2006,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2022,6 +2022,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h
View file

@ -2006,7 +2006,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2022,6 +2022,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h
View file

@ -2006,7 +2006,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2022,6 +2022,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration_adv.h
View file

@ -2006,7 +2006,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2022,6 +2022,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/Creality/Ender-4/Configuration_adv.h
View file

@ -2006,7 +2006,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2022,6 +2022,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/Creality/Ender-5 Plus/Configuration_adv.h
View file

@ -2006,7 +2006,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2022,6 +2022,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h
View file

@ -2006,7 +2006,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2022,6 +2022,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h
View file

@ -2006,7 +2006,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2022,6 +2022,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

8
config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h
View file

@ -2006,7 +2006,7 @@
#define PTC_PROBE_POS { 90, 100 }
// Enable additional compensation using hotend temperature
// Note: this values cannot be calibrated automatically but have to be set manually
// Note: this values cannot be calibrated automatically but have to be set manually via M871.
//#define USE_TEMP_EXT_COMPENSATION
// Probe temperature calibration generates a table of values starting at PTC_SAMPLE_START
@ -2022,6 +2022,12 @@
//#define BTC_SAMPLE_RES 5 // (°C)
//#define BTC_SAMPLE_COUNT 10
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
//#define ETC_SAMPLE_START 180 // (°C)
//#define ETC_SAMPLE_RES 5 // (°C)
//#define ETC_SAMPLE_COUNT 20
#endif
// The temperature the probe should be at while taking measurements during bed temperature
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

Some files were not shown because too many files have changed in this diff Show more