✨ NOZZLE_PARK_ON_TEMP_ERROR

MarlinFirmware/Marlin#23172

config/default/Configuration.h

@@ -1896,6 +1896,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/3DFabXYZ/Migbot/Configuration.h

@@ -1928,6 +1928,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/ADIMLab/Gantry v1/Configuration.h

@@ -1897,6 +1897,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 60    // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/ADIMLab/Gantry v2/Configuration.h

@@ -1897,6 +1897,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 60    // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/Alfawise/U20-bltouch/Configuration.h

@@ -1975,6 +1975,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE  50   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    6   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/Alfawise/U20/Configuration.h

@@ -1976,6 +1976,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE  50   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    6   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/AliExpress/CL-260/Configuration.h

@@ -1896,6 +1896,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/AliExpress/UM2pExt/Configuration.h

@@ -1897,6 +1897,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/Anet/A2/Configuration.h

@@ -1896,6 +1896,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/Anet/A2plus/Configuration.h

@@ -1896,6 +1896,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/Anet/A6/Configuration.h

@@ -1985,6 +1985,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/Anet/A8/Configuration.h

@@ -1899,6 +1899,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/Anet/A8plus/Configuration.h

@@ -1898,6 +1898,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/Anet/A9/Configuration.h

@@ -1896,6 +1896,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/Anet/E10/Configuration.h

@@ -1896,6 +1896,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/Anet/E16/BTT SKR 1.3/Configuration.h

@@ -1898,6 +1898,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/Anet/E16/Stock/Configuration.h

@@ -1898,6 +1898,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/Anet/ET4+/Configuration.h

@@ -1908,6 +1908,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/Anet/ET4-Pro/Configuration.h

@@ -1908,6 +1908,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/Anet/ET4/Configuration.h

@@ -1908,6 +1908,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/Anet/ET4X/Configuration.h

@@ -1908,6 +1908,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/Anet/ET5-Pro/Configuration.h

@@ -1903,6 +1903,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/Anet/ET5/Configuration.h

@@ -1903,6 +1903,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/Anet/ET5X/Configuration.h

@@ -1903,6 +1903,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/AnyCubic/Chiron/Configuration.h

@@ -1899,6 +1899,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h

@@ -1898,6 +1898,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h

@@ -1898,6 +1898,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h

@@ -1896,6 +1896,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/AnyCubic/i3 Mega/Configuration.h

@@ -1932,6 +1932,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/AnyCubic/i3/Configuration.h

@@ -1896,6 +1896,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/ArmEd/Configuration.h

@@ -1897,6 +1897,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/Artillery/Genius/BLTouch/Configuration.h

@@ -1896,6 +1896,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/Artillery/Genius/V1/Configuration.h

@@ -1896,6 +1896,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/Artillery/Hornet/Configuration.h

@@ -1896,6 +1896,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration.h

@@ -1912,6 +1912,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/Artillery/Sidewinder X1/V1/Configuration.h

@@ -1896,6 +1896,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/Artillery/Sidewinder X2/Configuration.h

@@ -1896,6 +1896,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/Azteeg/X5GT/Configuration.h

@@ -1896,6 +1896,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/BIBO/TouchX/cyclops/Configuration.h

@@ -1896,6 +1896,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/BIBO/TouchX/default/Configuration.h

@@ -1850,6 +1850,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/BIQU/B1 - SKR 1.4/Configuration.h

@@ -1917,6 +1917,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/BIQU/B1 - SKR 2/Configuration.h

@@ -1917,6 +1917,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/BIQU/B1 SE Plus/Configuration.h

@@ -1900,6 +1900,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/BIQU/BX/Configuration.h

@@ -1908,6 +1908,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/BQ/Hephestos/Configuration.h

@@ -1897,6 +1897,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/BQ/Hephestos_2/Configuration.h

@@ -1910,6 +1910,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/BQ/WITBOX/Configuration.h

@@ -1897,6 +1897,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/CTC/A13/Configuration.h

@@ -1898,6 +1898,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h

@@ -1897,6 +1897,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/Cartesio/Configuration.h

@@ -1912,6 +1912,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/Copymaster3D/300/Configuration.h

@@ -1897,6 +1897,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/Copymaster3D/400/Configuration.h

@@ -1896,6 +1896,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/Copymaster3D/500/Configuration.h

@@ -1897,6 +1897,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration.h

@@ -1905,6 +1905,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h

@@ -1905,6 +1905,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h

@@ -1896,6 +1896,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE   25   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h

@@ -1911,6 +1911,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration.h

@@ -1899,6 +1899,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h

@@ -1899,6 +1899,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration.h

@@ -1900,6 +1900,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/Creality/CR-10 V2/Configuration.h

@@ -1925,6 +1925,7 @@
   #define NOZZLE_PARK_POINT { (X_MIN_POS + 5), (Y_MAX_POS - 5), 10 }
   #define NOZZLE_PARK_XY_FEEDRATE 80   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/Creality/CR-10 V3/Configuration.h

@@ -1930,6 +1930,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 200   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE   14   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h

@@ -1907,6 +1907,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/Creality/CR-10/CrealityV1/Configuration.h

@@ -1896,6 +1896,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h

@@ -1908,6 +1908,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h

@@ -1909,6 +1909,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration.h

@@ -1896,6 +1896,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/Creality/CR-10S/CrealityV1/Configuration.h

@@ -1897,6 +1897,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/Creality/CR-20 Pro/Configuration.h

@@ -1899,6 +1899,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/Creality/CR-20/Configuration.h

@@ -1899,6 +1899,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/Creality/CR-30 PrintMill/Configuration.h

@@ -1896,6 +1896,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   0   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/Creality/CR-6 SE/Configuration.h

@@ -1896,6 +1896,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/Creality/CR-8/Configuration.h

@@ -1896,6 +1896,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/Creality/Ender-2/Configuration.h

@@ -1897,6 +1897,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/Creality/Ender-3 Max/Configuration.h

@@ -1901,6 +1901,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration.h

@@ -1896,6 +1896,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 200   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE   10   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h

@@ -1896,6 +1896,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h

@@ -1896,6 +1896,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h

@@ -1896,6 +1896,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h

@@ -1897,6 +1897,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h

@@ -1897,6 +1897,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h

@@ -1897,6 +1897,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration.h

@@ -1896,6 +1896,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration.h

@@ -1896,6 +1896,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration.h

@@ -1896,6 +1896,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration.h

@@ -1896,6 +1896,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration.h

@@ -1895,6 +1895,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration.h

@@ -1897,6 +1897,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h

@@ -1895,6 +1895,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h

@@ -1895,6 +1895,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h

@@ -1895,6 +1895,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h

@@ -1896,6 +1896,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h

@@ -1895,6 +1895,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h

@@ -1895,6 +1895,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h

@@ -1895,6 +1895,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/Creality/Ender-3/CrealityV1/Configuration.h

@@ -1897,6 +1897,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/Creality/Ender-3/CrealityV422/Configuration.h

@@ -1903,6 +1903,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/Creality/Ender-3/CrealityV427/Configuration.h

@@ -1897,6 +1897,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h

@@ -1897,6 +1897,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**

config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h

@@ -1897,6 +1897,7 @@
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
+  //#define NOZZLE_PARK_ON_TEMP_ERROR   // Park Nozzle before Halt on temperature error
 #endif
 
 /**