3D-printing/Configurations
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Configurations.git synced 2025-07-07 23:17:38 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions

Add POWER_LOSS_ZHOME_POS

Browse source
This commit is contained in:
Scott Lahteine 2020-09-25 18:56:40 -05:00
parent 21ecc0e43b
commit 4f422c813a
180 changed files with 900 additions and 180 deletions
Download patch file Download diff file Expand all files Collapse all files

6
config/examples/WASP/PowerWASP/Configuration_adv.h
View file

@ -1170,7 +1170,6 @@
#if ENABLED(POWER_LOSS_RECOVERY)
#define PLR_ENABLED_DEFAULT false // Power Loss Recovery enabled by default. (Set with 'M413 Sn' & M500)
//#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss
//#define POWER_LOSS_RECOVER_ZHOME // Z homing is needed for proper recovery. 99.9% of the time this should be disabled!
//#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS)
#define POWER_LOSS_PIN 65 // Pin to detect power loss. Set to -1 to disable default pin on boards without module.
#define POWER_LOSS_STATE LOW // State of pin indicating power loss
@ -1178,6 +1177,11 @@
//#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume
//#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power.
//#define POWER_LOSS_RECOVER_ZHOME // Z homing is needed for proper recovery. 99.9% of the time this should be disabled!
#if ENABLED(POWER_LOSS_RECOVER_ZHOME)
#define POWER_LOSS_ZHOME_POS { (X_BED_SIZE) / 2, 0 } // (mm) Safe XY position for homing Z to avoid print
#endif
// Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
// especially with "vase mode" printing. Set too high and vases cannot be continued.
#define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data