✨ CR-10 Max (alpha) (#965)

config/examples/Creality/CR-10 Max/README.md

@@ -0,0 +1,27 @@
+# CR-10 MAX Configurations for Marlin Firmware
+
+## Marlin DGUS UI "Reloaded" Instructions
+
+To use `DGUS_LCD_UI RELOADED` the stock LCD must be flashed with custom firmware.
+
+### Get the DWIN_SET
+
+- Download the `DWIN_SET` archive from https://github.com/Neo2003/DGUS-reloaded/releases/download/1.0.3/DWIN_SET.tar.gz
+- Extract the contents of the archive. You should now have a folder called `DWIN_SET`.
+
+### Prepare the SD Card
+
+- Format a Micro-SD card, selecting FAT32 for the file system and 4096 bytes sector size. These parameters are required for the procedure to work.
+- Copy the `DWIN_SET` folder to the root of the Micro-SD card.
+- Unmount and unplug your Micro-SD card.
+
+### Flash the touchscreen
+
+- Turn off and unplug your printer (both power and USB).
+- You will need to access the Micro-SD slot on the back of the touchscreen (not the one that may be on your mainboard). If necessary, open the printer to access this slot.
+- Insert the Micro-SD card into the screen SD slot.
+- Plug the printer's power cable back in (but not the USB cable) and turn on the printer.
+- After a few seconds the screen background will turn blue and the firmware flash will begin. _Do not cut power to the printer while the procedure is running!_
+- When the procedure ends the screen will display a blue background with an END message on the first line and a summary.
+- Turn off the printer. Remove the Micro-SD card from the touchscreen. Reassemble the printer if needed.
+- The touch-screen firmware is now up-to-date.