diff --git a/config/default/Configuration.h b/config/default/Configuration.h index c640ddaf11..8e35954754 100644 --- a/config/default/Configuration.h +++ b/config/default/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/3DFabXYZ/Migbot/Configuration.h b/config/examples/3DFabXYZ/Migbot/Configuration.h index 021c02df1b..1abfaae495 100644 --- a/config/examples/3DFabXYZ/Migbot/Configuration.h +++ b/config/examples/3DFabXYZ/Migbot/Configuration.h @@ -1437,6 +1437,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2015,6 +2024,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2032,15 +2047,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2226,12 +2232,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/ADIMLab/Gantry v1/Configuration.h b/config/examples/ADIMLab/Gantry v1/Configuration.h index e93c5496a3..6a00c7a761 100644 --- a/config/examples/ADIMLab/Gantry v1/Configuration.h +++ b/config/examples/ADIMLab/Gantry v1/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2014,6 +2023,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2031,15 +2046,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2225,12 +2231,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/ADIMLab/Gantry v2/Configuration.h b/config/examples/ADIMLab/Gantry v2/Configuration.h index 30c6559177..3a8e0ff02b 100644 --- a/config/examples/ADIMLab/Gantry v2/Configuration.h +++ b/config/examples/ADIMLab/Gantry v2/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2014,6 +2023,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2031,15 +2046,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2225,12 +2231,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Alfawise/U20-bltouch/Configuration.h b/config/examples/Alfawise/U20-bltouch/Configuration.h index 6941764450..57c075d687 100644 --- a/config/examples/Alfawise/U20-bltouch/Configuration.h +++ b/config/examples/Alfawise/U20-bltouch/Configuration.h @@ -1504,6 +1504,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2092,6 +2101,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2109,15 +2124,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2303,12 +2309,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Alfawise/U20/Configuration.h b/config/examples/Alfawise/U20/Configuration.h index edd8e19dd9..d3faa596fc 100644 --- a/config/examples/Alfawise/U20/Configuration.h +++ b/config/examples/Alfawise/U20/Configuration.h @@ -1505,6 +1505,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2093,6 +2102,12 @@ //#define AUTO_BED_LEVELING_UBL #define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2110,15 +2125,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2304,12 +2310,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/AliExpress/CL-260/Configuration.h b/config/examples/AliExpress/CL-260/Configuration.h index 6b6dd5ae5d..a7fc46a57d 100644 --- a/config/examples/AliExpress/CL-260/Configuration.h +++ b/config/examples/AliExpress/CL-260/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/AliExpress/UM2pExt/Configuration.h b/config/examples/AliExpress/UM2pExt/Configuration.h index 858b937796..01236190b4 100644 --- a/config/examples/AliExpress/UM2pExt/Configuration.h +++ b/config/examples/AliExpress/UM2pExt/Configuration.h @@ -1436,6 +1436,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2014,6 +2023,12 @@ //#define AUTO_BED_LEVELING_UBL #define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2031,15 +2046,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2225,12 +2231,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Anet/A2/Configuration.h b/config/examples/Anet/A2/Configuration.h index cdd66a1cb7..8e67b21170 100644 --- a/config/examples/Anet/A2/Configuration.h +++ b/config/examples/Anet/A2/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Anet/A2plus/Configuration.h b/config/examples/Anet/A2plus/Configuration.h index ac9e096d6a..5b8e4525f2 100644 --- a/config/examples/Anet/A2plus/Configuration.h +++ b/config/examples/Anet/A2plus/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Anet/A6/Configuration.h b/config/examples/Anet/A6/Configuration.h index 7d31126b7d..0f734e9ede 100644 --- a/config/examples/Anet/A6/Configuration.h +++ b/config/examples/Anet/A6/Configuration.h @@ -1452,6 +1452,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2089,6 +2098,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2106,15 +2121,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2300,12 +2306,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Anet/A8/Configuration.h b/config/examples/Anet/A8/Configuration.h index 881a9d81c2..89d66b1ad3 100644 --- a/config/examples/Anet/A8/Configuration.h +++ b/config/examples/Anet/A8/Configuration.h @@ -1438,6 +1438,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2016,6 +2025,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2033,15 +2048,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2227,12 +2233,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Anet/A8plus/Configuration.h b/config/examples/Anet/A8plus/Configuration.h index 4e55900a3c..ba83391c01 100644 --- a/config/examples/Anet/A8plus/Configuration.h +++ b/config/examples/Anet/A8plus/Configuration.h @@ -1437,6 +1437,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2015,6 +2024,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2032,15 +2047,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2226,12 +2232,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Anet/A9/Configuration.h b/config/examples/Anet/A9/Configuration.h index 46b7c7a648..4ea8401e61 100644 --- a/config/examples/Anet/A9/Configuration.h +++ b/config/examples/Anet/A9/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL #define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Anet/E10/Configuration.h b/config/examples/Anet/E10/Configuration.h index da2425da7b..11602df706 100644 --- a/config/examples/Anet/E10/Configuration.h +++ b/config/examples/Anet/E10/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL #define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h b/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h index de427ceea2..975df258dc 100644 --- a/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h +++ b/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h @@ -1437,6 +1437,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2015,6 +2024,12 @@ //#define AUTO_BED_LEVELING_UBL #define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2032,15 +2047,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2226,12 +2232,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Anet/E16/Stock/Configuration.h b/config/examples/Anet/E16/Stock/Configuration.h index d9a2c849c2..799eb47408 100644 --- a/config/examples/Anet/E16/Stock/Configuration.h +++ b/config/examples/Anet/E16/Stock/Configuration.h @@ -1437,6 +1437,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2015,6 +2024,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2032,15 +2047,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2226,12 +2232,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Anet/ET4+/Configuration.h b/config/examples/Anet/ET4+/Configuration.h index dc8a6da673..0021ff75d1 100644 --- a/config/examples/Anet/ET4+/Configuration.h +++ b/config/examples/Anet/ET4+/Configuration.h @@ -1441,6 +1441,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2019,6 +2028,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2036,15 +2051,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2230,12 +2236,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Anet/ET4-Pro/Configuration.h b/config/examples/Anet/ET4-Pro/Configuration.h index 90862ae767..f13b7979a5 100644 --- a/config/examples/Anet/ET4-Pro/Configuration.h +++ b/config/examples/Anet/ET4-Pro/Configuration.h @@ -1441,6 +1441,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2019,6 +2028,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2036,15 +2051,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2230,12 +2236,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Anet/ET4/Configuration.h b/config/examples/Anet/ET4/Configuration.h index a713d16cf3..338def13e8 100644 --- a/config/examples/Anet/ET4/Configuration.h +++ b/config/examples/Anet/ET4/Configuration.h @@ -1441,6 +1441,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2019,6 +2028,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2036,15 +2051,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2230,12 +2236,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Anet/ET4X/Configuration.h b/config/examples/Anet/ET4X/Configuration.h index 6b590e0822..5922c7550e 100644 --- a/config/examples/Anet/ET4X/Configuration.h +++ b/config/examples/Anet/ET4X/Configuration.h @@ -1441,6 +1441,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2019,6 +2028,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2036,15 +2051,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2230,12 +2236,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Anet/ET5-Pro/Configuration.h b/config/examples/Anet/ET5-Pro/Configuration.h index 14f6ad2f61..dc37637973 100644 --- a/config/examples/Anet/ET5-Pro/Configuration.h +++ b/config/examples/Anet/ET5-Pro/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Anet/ET5/Configuration.h b/config/examples/Anet/ET5/Configuration.h index ce1bdfbd48..70b6d3f904 100644 --- a/config/examples/Anet/ET5/Configuration.h +++ b/config/examples/Anet/ET5/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Anet/ET5X/Configuration.h b/config/examples/Anet/ET5X/Configuration.h index 5f62663dd8..6e2a4280f9 100644 --- a/config/examples/Anet/ET5X/Configuration.h +++ b/config/examples/Anet/ET5X/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/AnyCubic/Chiron/Configuration.h b/config/examples/AnyCubic/Chiron/Configuration.h index 7a0808be35..19a31025d9 100644 --- a/config/examples/AnyCubic/Chiron/Configuration.h +++ b/config/examples/AnyCubic/Chiron/Configuration.h @@ -1438,6 +1438,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2016,6 +2025,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +#define Z_PROBE_END_SCRIPT "G27/n G1 Y0 F5000" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2033,15 +2048,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2227,12 +2233,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -#define Z_PROBE_END_SCRIPT "G27/n G1 Y0 F5000" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h index 0ed90f0ff9..c5584b429c 100644 --- a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h +++ b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h @@ -1436,6 +1436,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2014,6 +2023,12 @@ //#define AUTO_BED_LEVELING_UBL #define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2031,15 +2046,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2225,12 +2231,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h index 89a514fd14..da1c386c11 100644 --- a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h +++ b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h @@ -1436,6 +1436,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2014,6 +2023,12 @@ //#define AUTO_BED_LEVELING_UBL #define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2031,15 +2046,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2225,12 +2231,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h index 377797543e..2d1f5efebb 100644 --- a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h +++ b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL #define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/AnyCubic/Vyper/Configuration.h b/config/examples/AnyCubic/Vyper/Configuration.h index b4cb6fbba8..e93cceb9ee 100644 --- a/config/examples/AnyCubic/Vyper/Configuration.h +++ b/config/examples/AnyCubic/Vyper/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +#define Z_PROBE_END_SCRIPT "G28" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 60 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -#define Z_PROBE_END_SCRIPT "G28" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration.h b/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration.h index 728148886d..60127fea5f 100644 --- a/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration.h +++ b/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration.h @@ -1484,6 +1484,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2073,6 +2082,12 @@ #define MESH_BED_LEVELING #endif +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2090,15 +2105,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2284,12 +2290,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration.h b/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration.h index 6a3ef84e90..ac70257dcb 100644 --- a/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration.h +++ b/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration.h @@ -1449,6 +1449,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2032,6 +2041,12 @@ #endif //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2049,15 +2064,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2243,12 +2249,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/AnyCubic/i3/Configuration.h b/config/examples/AnyCubic/i3/Configuration.h index b5e34f3d13..d6237531ca 100644 --- a/config/examples/AnyCubic/i3/Configuration.h +++ b/config/examples/AnyCubic/i3/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/ArmEd/Configuration.h b/config/examples/ArmEd/Configuration.h index 4e0f0fef3c..44946318f7 100644 --- a/config/examples/ArmEd/Configuration.h +++ b/config/examples/ArmEd/Configuration.h @@ -1436,6 +1436,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2014,6 +2023,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2031,15 +2046,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2225,12 +2231,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Artillery/Genius Pro/Configuration.h b/config/examples/Artillery/Genius Pro/Configuration.h index 109119381b..e9ce6bbb96 100644 --- a/config/examples/Artillery/Genius Pro/Configuration.h +++ b/config/examples/Artillery/Genius Pro/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Artillery/Genius/BLTouch/Configuration.h b/config/examples/Artillery/Genius/BLTouch/Configuration.h index 19105a37e5..e899260272 100644 --- a/config/examples/Artillery/Genius/BLTouch/Configuration.h +++ b/config/examples/Artillery/Genius/BLTouch/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Artillery/Genius/V1/Configuration.h b/config/examples/Artillery/Genius/V1/Configuration.h index 6ec8ec3cb6..4fc326672d 100644 --- a/config/examples/Artillery/Genius/V1/Configuration.h +++ b/config/examples/Artillery/Genius/V1/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Artillery/Hornet/Configuration.h b/config/examples/Artillery/Hornet/Configuration.h index 6da7f4853c..58b8863f3e 100644 --- a/config/examples/Artillery/Hornet/Configuration.h +++ b/config/examples/Artillery/Hornet/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL #define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration.h b/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration.h index 3256570572..94c11588b0 100644 --- a/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration.h +++ b/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration.h @@ -1451,6 +1451,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2029,6 +2038,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2046,15 +2061,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2240,12 +2246,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Artillery/Sidewinder X1/V1/Configuration.h b/config/examples/Artillery/Sidewinder X1/V1/Configuration.h index f7add1ad48..1c380b50fd 100644 --- a/config/examples/Artillery/Sidewinder X1/V1/Configuration.h +++ b/config/examples/Artillery/Sidewinder X1/V1/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Artillery/Sidewinder X2/Configuration.h b/config/examples/Artillery/Sidewinder X2/Configuration.h index 05b2d22d36..a39d38f19e 100644 --- a/config/examples/Artillery/Sidewinder X2/Configuration.h +++ b/config/examples/Artillery/Sidewinder X2/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Azteeg/X5GT/Configuration.h b/config/examples/Azteeg/X5GT/Configuration.h index 06c3baa87e..c401310a91 100644 --- a/config/examples/Azteeg/X5GT/Configuration.h +++ b/config/examples/Azteeg/X5GT/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration.h b/config/examples/BIBO/TouchX/cyclops/Configuration.h index 94a002c89c..b852b88dc5 100644 --- a/config/examples/BIBO/TouchX/cyclops/Configuration.h +++ b/config/examples/BIBO/TouchX/cyclops/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/BIBO/TouchX/default/Configuration.h b/config/examples/BIBO/TouchX/default/Configuration.h index d38111a274..5b9918bc82 100644 --- a/config/examples/BIBO/TouchX/default/Configuration.h +++ b/config/examples/BIBO/TouchX/default/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/BIQU/B1 SE Plus/Configuration.h b/config/examples/BIQU/B1 SE Plus/Configuration.h index 01b682b8fb..0750d68d71 100644 --- a/config/examples/BIQU/B1 SE Plus/Configuration.h +++ b/config/examples/BIQU/B1 SE Plus/Configuration.h @@ -1433,6 +1433,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2011,6 +2020,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2028,15 +2043,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2222,12 +2228,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/BIQU/B1 SE/Configuration.h b/config/examples/BIQU/B1 SE/Configuration.h index ddbed67f75..3f09afbbb1 100644 --- a/config/examples/BIQU/B1 SE/Configuration.h +++ b/config/examples/BIQU/B1 SE/Configuration.h @@ -1433,6 +1433,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2011,6 +2020,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2028,15 +2043,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2222,12 +2228,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/BIQU/B1/Configuration.h b/config/examples/BIQU/B1/Configuration.h index 0050950c23..acb64f5172 100644 --- a/config/examples/BIQU/B1/Configuration.h +++ b/config/examples/BIQU/B1/Configuration.h @@ -1444,6 +1444,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2027,6 +2036,12 @@ #define MESH_BED_LEVELING #endif +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2044,15 +2059,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2238,12 +2244,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/BIQU/BX/Configuration.h b/config/examples/BIQU/BX/Configuration.h index 628d96868e..c3509f0a96 100644 --- a/config/examples/BIQU/BX/Configuration.h +++ b/config/examples/BIQU/BX/Configuration.h @@ -1442,6 +1442,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2020,6 +2029,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2037,15 +2052,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2231,12 +2237,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/BIQU/Hurakan/Configuration.h b/config/examples/BIQU/Hurakan/Configuration.h index 3424cc1ffa..046154e567 100644 --- a/config/examples/BIQU/Hurakan/Configuration.h +++ b/config/examples/BIQU/Hurakan/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/BIQU/Thunder Standard/Configuration.h b/config/examples/BIQU/Thunder Standard/Configuration.h index 3dae7e4767..47edccc248 100644 --- a/config/examples/BIQU/Thunder Standard/Configuration.h +++ b/config/examples/BIQU/Thunder Standard/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/BQ/Hephestos/Configuration.h b/config/examples/BQ/Hephestos/Configuration.h index d7a558d40a..115e764c23 100644 --- a/config/examples/BQ/Hephestos/Configuration.h +++ b/config/examples/BQ/Hephestos/Configuration.h @@ -1436,6 +1436,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2014,6 +2023,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2031,15 +2046,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2225,12 +2231,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/BQ/Hephestos_2/Configuration.h b/config/examples/BQ/Hephestos_2/Configuration.h index 261c2ea284..cb0915caa3 100644 --- a/config/examples/BQ/Hephestos_2/Configuration.h +++ b/config/examples/BQ/Hephestos_2/Configuration.h @@ -1449,6 +1449,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2027,6 +2036,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +#define Z_PROBE_END_SCRIPT "G27 P0" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2044,15 +2059,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2238,12 +2244,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -#define Z_PROBE_END_SCRIPT "G27 P0" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/BQ/WITBOX/Configuration.h b/config/examples/BQ/WITBOX/Configuration.h index 3fed154442..e944306f35 100644 --- a/config/examples/BQ/WITBOX/Configuration.h +++ b/config/examples/BQ/WITBOX/Configuration.h @@ -1436,6 +1436,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2014,6 +2023,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2031,15 +2046,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2225,12 +2231,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/CTC/A13/Configuration.h b/config/examples/CTC/A13/Configuration.h index 09f72eaba5..2619d9dbb2 100644 --- a/config/examples/CTC/A13/Configuration.h +++ b/config/examples/CTC/A13/Configuration.h @@ -1436,6 +1436,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2015,6 +2024,12 @@ #define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2032,15 +2047,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2226,12 +2232,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/CTC/Bizer/Configuration.h b/config/examples/CTC/Bizer/Configuration.h index 19f1f45bde..ac13a9da94 100644 --- a/config/examples/CTC/Bizer/Configuration.h +++ b/config/examples/CTC/Bizer/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h b/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h index 24427a705b..b8131f2570 100644 --- a/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h +++ b/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h @@ -1436,6 +1436,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2014,6 +2023,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2031,15 +2046,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2225,12 +2231,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Cartesio/Configuration.h b/config/examples/Cartesio/Configuration.h index 7f92fcd920..0d18926848 100644 --- a/config/examples/Cartesio/Configuration.h +++ b/config/examples/Cartesio/Configuration.h @@ -1451,6 +1451,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2029,6 +2038,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2046,15 +2061,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2240,12 +2246,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Copymaster3D/300/Configuration.h b/config/examples/Copymaster3D/300/Configuration.h index ce64c1da84..6ab84d34bd 100644 --- a/config/examples/Copymaster3D/300/Configuration.h +++ b/config/examples/Copymaster3D/300/Configuration.h @@ -1436,6 +1436,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2014,6 +2023,12 @@ //#define AUTO_BED_LEVELING_UBL #define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2031,15 +2046,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2225,12 +2231,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Copymaster3D/400/Configuration.h b/config/examples/Copymaster3D/400/Configuration.h index 5f754164f4..337834097c 100644 --- a/config/examples/Copymaster3D/400/Configuration.h +++ b/config/examples/Copymaster3D/400/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL #define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Copymaster3D/500/Configuration.h b/config/examples/Copymaster3D/500/Configuration.h index 2466b7239a..681bc36dec 100644 --- a/config/examples/Copymaster3D/500/Configuration.h +++ b/config/examples/Copymaster3D/500/Configuration.h @@ -1436,6 +1436,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2014,6 +2023,12 @@ //#define AUTO_BED_LEVELING_UBL #define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2031,15 +2046,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2225,12 +2231,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/CR-10 Max/Configuration.h b/config/examples/Creality/CR-10 Max/Configuration.h index 35bcca1e34..bb844272cf 100644 --- a/config/examples/Creality/CR-10 Max/Configuration.h +++ b/config/examples/Creality/CR-10 Max/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration.h index 48b9549f30..f4d95d061a 100644 --- a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -1443,6 +1443,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2021,6 +2030,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2038,15 +2053,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2232,12 +2238,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 3.0/Configuration.h b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 3.0/Configuration.h index ed87cd5eaf..a7accac8b9 100644 --- a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 3.0/Configuration.h +++ b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 3.0/Configuration.h @@ -1443,6 +1443,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2021,6 +2030,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2038,15 +2053,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2232,12 +2238,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h index 5aafa36981..c0b4c96d24 100644 --- a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h @@ -1444,6 +1444,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2022,6 +2031,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2039,15 +2054,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2233,12 +2239,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h index 8134125fa7..b1694e0eb8 100644 --- a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h +++ b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h index 3e3f109ea0..debda7da0a 100644 --- a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h @@ -1436,6 +1436,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2016,6 +2025,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2033,15 +2048,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2227,12 +2233,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration.h b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration.h index 58def8b0ca..6619692c48 100644 --- a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration.h +++ b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration.h @@ -1436,6 +1436,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2016,6 +2025,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2033,15 +2048,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2227,12 +2233,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration.h b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration.h index b70ea87661..036a369e7b 100644 --- a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration.h +++ b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2015,6 +2024,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2032,15 +2047,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2226,12 +2232,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RB, LB, RF } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h index a004c7b33e..c942753899 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h @@ -1436,6 +1436,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2016,6 +2025,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2033,15 +2048,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2227,12 +2233,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration.h b/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration.h index 51bf7692fd..3a91492b83 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration.h +++ b/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration.h @@ -1437,6 +1437,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2017,6 +2026,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2034,15 +2049,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2228,12 +2234,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/CR-10 V2/Configuration.h b/config/examples/Creality/CR-10 V2/Configuration.h index 0fcb59cf07..70a55ff553 100644 --- a/config/examples/Creality/CR-10 V2/Configuration.h +++ b/config/examples/Creality/CR-10 V2/Configuration.h @@ -1453,6 +1453,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2036,6 +2045,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2055,15 +2070,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2251,12 +2257,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/CR-10 V3/Configuration.h b/config/examples/Creality/CR-10 V3/Configuration.h index 2702f3c4a8..71de63f4f2 100644 --- a/config/examples/Creality/CR-10 V3/Configuration.h +++ b/config/examples/Creality/CR-10 V3/Configuration.h @@ -1454,6 +1454,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2039,6 +2048,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2058,15 +2073,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2256,12 +2262,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h index 6326c40dbc..40ea3dc131 100644 --- a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -1434,6 +1434,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2012,6 +2021,12 @@ //#define AUTO_BED_LEVELING_UBL #define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2029,15 +2044,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2223,12 +2229,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 3.0/Configuration.h b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 3.0/Configuration.h index c708535314..ed8e0a83e7 100644 --- a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 3.0/Configuration.h +++ b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 3.0/Configuration.h @@ -1434,6 +1434,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2012,6 +2021,12 @@ //#define AUTO_BED_LEVELING_UBL #define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2029,15 +2044,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2223,12 +2229,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/CR-10/CrealityV1/Configuration.h b/config/examples/Creality/CR-10/CrealityV1/Configuration.h index 9d57173893..87f1b11479 100644 --- a/config/examples/Creality/CR-10/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10/CrealityV1/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/CR-10S Pro/Configuration.h b/config/examples/Creality/CR-10S Pro/Configuration.h index bab1bec23c..c348ac22c0 100644 --- a/config/examples/Creality/CR-10S Pro/Configuration.h +++ b/config/examples/Creality/CR-10S Pro/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h index b06e10513c..ffff6906e7 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration.h b/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration.h index 030ec67c63..67b9709461 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h index bf6474825f..6a2a7318fb 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -1436,6 +1436,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2014,6 +2023,12 @@ //#define AUTO_BED_LEVELING_UBL #define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2031,15 +2046,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2225,12 +2231,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration.h index b18572c82f..5364e44de3 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/CR-10S/CrealityV1/Configuration.h b/config/examples/Creality/CR-10S/CrealityV1/Configuration.h index 76c2e813da..5807033b50 100644 --- a/config/examples/Creality/CR-10S/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10S/CrealityV1/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2014,6 +2023,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2031,15 +2046,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2225,12 +2231,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/CR-20 Pro/Configuration.h b/config/examples/Creality/CR-20 Pro/Configuration.h index 33ed986c75..5534b3908a 100644 --- a/config/examples/Creality/CR-20 Pro/Configuration.h +++ b/config/examples/Creality/CR-20 Pro/Configuration.h @@ -1436,6 +1436,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2016,6 +2025,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2033,15 +2048,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2227,12 +2233,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration.h b/config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration.h index c850ce6648..376857d881 100644 --- a/config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration.h +++ b/config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration.h @@ -1436,6 +1436,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2014,6 +2023,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2031,15 +2046,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2225,12 +2231,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/CR-20/Stock/Configuration.h b/config/examples/Creality/CR-20/Stock/Configuration.h index 0194dba7a1..b76e01db38 100644 --- a/config/examples/Creality/CR-20/Stock/Configuration.h +++ b/config/examples/Creality/CR-20/Stock/Configuration.h @@ -1436,6 +1436,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2016,6 +2025,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2033,15 +2048,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2227,12 +2233,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/CR-30 PrintMill/Configuration.h b/config/examples/Creality/CR-30 PrintMill/Configuration.h index 228c14f12e..ebc53b9773 100644 --- a/config/examples/Creality/CR-30 PrintMill/Configuration.h +++ b/config/examples/Creality/CR-30 PrintMill/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/CR-6 SE/Configuration.h b/config/examples/Creality/CR-6 SE/Configuration.h index 08a6361378..80ec8e39cf 100644 --- a/config/examples/Creality/CR-6 SE/Configuration.h +++ b/config/examples/Creality/CR-6 SE/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +#define Z_PROBE_END_SCRIPT "G1 X116 Y116 F6000" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -#define Z_PROBE_END_SCRIPT "G1 X116 Y116 F6000" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/CR-8/Configuration.h b/config/examples/Creality/CR-8/Configuration.h index 5c1461c7b5..78b5316f81 100644 --- a/config/examples/Creality/CR-8/Configuration.h +++ b/config/examples/Creality/CR-8/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration.h b/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration.h index 94ac421761..bc8912bde5 100644 --- a/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration.h +++ b/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/Ender-2/Configuration.h b/config/examples/Creality/Ender-2/Configuration.h index 260e86b115..1426cc07a3 100644 --- a/config/examples/Creality/Ender-2/Configuration.h +++ b/config/examples/Creality/Ender-2/Configuration.h @@ -1436,6 +1436,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2014,6 +2023,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2031,15 +2046,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2225,12 +2231,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/Ender-3 Max Neo/Configuration.h b/config/examples/Creality/Ender-3 Max Neo/Configuration.h index 3423b5f55c..cb291f5823 100644 --- a/config/examples/Creality/Ender-3 Max Neo/Configuration.h +++ b/config/examples/Creality/Ender-3 Max Neo/Configuration.h @@ -1436,6 +1436,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2014,6 +2023,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2031,15 +2046,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2225,12 +2231,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/Ender-3 Max/Configuration.h b/config/examples/Creality/Ender-3 Max/Configuration.h index f2356f4640..615edc9d01 100644 --- a/config/examples/Creality/Ender-3 Max/Configuration.h +++ b/config/examples/Creality/Ender-3 Max/Configuration.h @@ -1439,6 +1439,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2018,6 +2027,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2035,15 +2050,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2229,12 +2235,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/Ender-3 Neo/Configuration.h b/config/examples/Creality/Ender-3 Neo/Configuration.h index 433478ec00..1db1ace5db 100644 --- a/config/examples/Creality/Ender-3 Neo/Configuration.h +++ b/config/examples/Creality/Ender-3 Neo/Configuration.h @@ -1436,6 +1436,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2014,6 +2023,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2031,15 +2046,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2225,12 +2231,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration.h index 71a29477db..0e59c154fd 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h index 66e6ba4d1a..0625c92fc7 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL #define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h index 7d86c747b9..78469049de 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL #define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h index c83dcb5613..5f6681cea6 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL #define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration.h index b18996b352..76343f2e24 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration.h @@ -1434,6 +1434,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2012,6 +2021,12 @@ //#define AUTO_BED_LEVELING_UBL #define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2029,15 +2044,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2223,12 +2229,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h index 77c32c9884..cea4359d86 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h @@ -1436,6 +1436,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2014,6 +2023,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2031,15 +2046,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2225,12 +2231,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h index 0482cd9763..308f0e1b2c 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h index a9d22f69b0..f24220956c 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h @@ -1436,6 +1436,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2014,6 +2023,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2031,15 +2046,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2225,12 +2231,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/Ender-3 S1 Plus/Configuration.h b/config/examples/Creality/Ender-3 S1 Plus/Configuration.h index 7367d62489..05e120ca64 100644 --- a/config/examples/Creality/Ender-3 S1 Plus/Configuration.h +++ b/config/examples/Creality/Ender-3 S1 Plus/Configuration.h @@ -1436,6 +1436,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2014,6 +2023,12 @@ #define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2031,15 +2046,6 @@ #define LEVELING_BED_TEMP 60 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2225,12 +2231,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/Ender-3 S1 Pro/Configuration.h b/config/examples/Creality/Ender-3 S1 Pro/Configuration.h index efafc8d15c..032a450eda 100644 --- a/config/examples/Creality/Ender-3 S1 Pro/Configuration.h +++ b/config/examples/Creality/Ender-3 S1 Pro/Configuration.h @@ -1436,6 +1436,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2014,6 +2023,12 @@ #define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2031,15 +2046,6 @@ #define LEVELING_BED_TEMP 60 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2225,12 +2231,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/Ender-3 S1/STM32F1/Configuration.h b/config/examples/Creality/Ender-3 S1/STM32F1/Configuration.h index 89ab066d57..a6e0d182a7 100644 --- a/config/examples/Creality/Ender-3 S1/STM32F1/Configuration.h +++ b/config/examples/Creality/Ender-3 S1/STM32F1/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/Ender-3 S1/STM32F4/Configuration.h b/config/examples/Creality/Ender-3 S1/STM32F4/Configuration.h index 3236e446e2..25718dd904 100644 --- a/config/examples/Creality/Ender-3 S1/STM32F4/Configuration.h +++ b/config/examples/Creality/Ender-3 S1/STM32F4/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RB, RF, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/Ender-3 V2 Neo/Configuration.h b/config/examples/Creality/Ender-3 V2 Neo/Configuration.h index 33b1508aea..59d21680d4 100644 --- a/config/examples/Creality/Ender-3 V2 Neo/Configuration.h +++ b/config/examples/Creality/Ender-3 V2 Neo/Configuration.h @@ -1436,6 +1436,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2014,6 +2023,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2031,15 +2046,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2225,12 +2231,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration.h index 5c665ebf9d..b252103343 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration.h index 608a5d35fa..d3fa3993e0 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration.h index 87ffc48df8..057edea269 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration.h index a1f7a54966..f51ded67e5 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration.h b/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration.h index 1035ca3cda..b7673f9b24 100644 --- a/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration.h b/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration.h index 9633f6acc0..420016702f 100644 --- a/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration.h index ace050a493..1b5cfe9a51 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration.h @@ -1434,6 +1434,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2012,6 +2021,12 @@ //#define AUTO_BED_LEVELING_UBL #define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2029,15 +2044,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2223,12 +2229,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/Ender-3/BigTreeTech Manta E3 EZ/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech Manta E3 EZ/Configuration.h index bb73498dbc..99f87e1918 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech Manta E3 EZ/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech Manta E3 EZ/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL #define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration.h index 87c8c4d5a7..774958022f 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration.h @@ -1436,6 +1436,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2014,6 +2023,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2031,15 +2046,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2225,12 +2231,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h index 521b774e7a..b765f48e72 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h @@ -1434,6 +1434,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2012,6 +2021,12 @@ //#define AUTO_BED_LEVELING_UBL #define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2029,15 +2044,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2223,12 +2229,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h index 862f18ac3c..ce761fa5f6 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h @@ -1434,6 +1434,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2012,6 +2021,12 @@ //#define AUTO_BED_LEVELING_UBL #define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2029,15 +2044,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2223,12 +2229,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h index d3f254744c..61ade283e2 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h @@ -1434,6 +1434,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2012,6 +2021,12 @@ //#define AUTO_BED_LEVELING_UBL #define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2029,15 +2044,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2223,12 +2229,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h index 640a315c4c..3ca5d27333 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h index 64f068e0ea..929ba3fa91 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h @@ -1434,6 +1434,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2012,6 +2021,12 @@ //#define AUTO_BED_LEVELING_UBL #define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2029,15 +2044,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2223,12 +2229,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h index f1582eee4f..9e46e9cf1a 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h @@ -1434,6 +1434,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2012,6 +2021,12 @@ //#define AUTO_BED_LEVELING_UBL #define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2029,15 +2044,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2223,12 +2229,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h index 7b80d855f5..9518543ae4 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -1434,6 +1434,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2012,6 +2021,12 @@ //#define AUTO_BED_LEVELING_UBL #define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2029,15 +2044,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2223,12 +2229,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration.h index a6c724817f..652f994eac 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration.h @@ -1434,6 +1434,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2012,6 +2021,12 @@ //#define AUTO_BED_LEVELING_UBL #define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2029,15 +2044,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2223,12 +2229,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/Ender-3/CrealityV1/Configuration.h b/config/examples/Creality/Ender-3/CrealityV1/Configuration.h index 92b0e05140..e7f60acbbf 100644 --- a/config/examples/Creality/Ender-3/CrealityV1/Configuration.h +++ b/config/examples/Creality/Ender-3/CrealityV1/Configuration.h @@ -1436,6 +1436,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2014,6 +2023,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2031,15 +2046,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2225,12 +2231,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/Ender-3/CrealityV422/Configuration.h b/config/examples/Creality/Ender-3/CrealityV422/Configuration.h index 73f19e2430..a94c3a611c 100644 --- a/config/examples/Creality/Ender-3/CrealityV422/Configuration.h +++ b/config/examples/Creality/Ender-3/CrealityV422/Configuration.h @@ -1442,6 +1442,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2020,6 +2029,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2037,15 +2052,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2231,12 +2237,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/Ender-3/CrealityV427/Configuration.h b/config/examples/Creality/Ender-3/CrealityV427/Configuration.h index 1a690c0fcf..d703e34ff3 100644 --- a/config/examples/Creality/Ender-3/CrealityV427/Configuration.h +++ b/config/examples/Creality/Ender-3/CrealityV427/Configuration.h @@ -1436,6 +1436,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2014,6 +2023,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2031,15 +2046,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2225,12 +2231,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h index b9a60fa539..0acd2f444e 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h @@ -1436,6 +1436,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2014,6 +2023,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2031,15 +2046,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2225,12 +2231,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h index a44d6718ee..b1fb81b864 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h @@ -1436,6 +1436,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2014,6 +2023,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2031,15 +2046,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2225,12 +2231,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration.h index 48f4fdc860..46885a039f 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration.h @@ -1436,6 +1436,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2014,6 +2023,12 @@ //#define AUTO_BED_LEVELING_UBL #define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2031,15 +2046,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2225,12 +2231,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h index 6b91452be3..f5ff30e6cd 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h @@ -1436,6 +1436,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2014,6 +2023,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2031,15 +2046,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2225,12 +2231,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h index a53f81f62b..f713153cc9 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h @@ -1436,6 +1436,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2014,6 +2023,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2031,15 +2046,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2225,12 +2231,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h index 42542dfec0..c9a9462e59 100644 --- a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h +++ b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h @@ -1441,6 +1441,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2019,6 +2028,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2036,15 +2051,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2230,12 +2236,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration.h b/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration.h index 668cca42c2..658053ed58 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration.h @@ -1434,6 +1434,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2012,6 +2021,12 @@ //#define AUTO_BED_LEVELING_UBL #define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2029,15 +2044,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2223,12 +2229,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration.h b/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration.h index a9e6641dee..6db7a461f3 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration.h @@ -1434,6 +1434,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2012,6 +2021,12 @@ //#define AUTO_BED_LEVELING_UBL #define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2029,15 +2044,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2223,12 +2229,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration.h b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration.h index 28161199fa..03840acac1 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration.h @@ -1436,6 +1436,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2014,6 +2023,12 @@ //#define AUTO_BED_LEVELING_UBL #define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2031,15 +2046,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2225,12 +2231,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration.h b/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration.h index 646f088815..11abf64186 100644 --- a/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration.h +++ b/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration.h @@ -1436,6 +1436,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2014,6 +2023,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2031,15 +2046,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2225,12 +2231,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/Ender-4/Configuration.h b/config/examples/Creality/Ender-4/Configuration.h index bced07d171..3b0b765c70 100644 --- a/config/examples/Creality/Ender-4/Configuration.h +++ b/config/examples/Creality/Ender-4/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL #define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/Ender-5 Plus/BigTreeTech SKR 3/Configuration.h b/config/examples/Creality/Ender-5 Plus/BigTreeTech SKR 3/Configuration.h index b58447b15b..ff23f35213 100644 --- a/config/examples/Creality/Ender-5 Plus/BigTreeTech SKR 3/Configuration.h +++ b/config/examples/Creality/Ender-5 Plus/BigTreeTech SKR 3/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ #define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/Ender-5 Plus/CrealityV1 (ORIGIN UI)/Configuration.h b/config/examples/Creality/Ender-5 Plus/CrealityV1 (ORIGIN UI)/Configuration.h index d903911b77..e3ce4d0271 100644 --- a/config/examples/Creality/Ender-5 Plus/CrealityV1 (ORIGIN UI)/Configuration.h +++ b/config/examples/Creality/Ender-5 Plus/CrealityV1 (ORIGIN UI)/Configuration.h @@ -1444,6 +1444,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2023,6 +2032,12 @@ #define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2040,15 +2055,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2234,12 +2240,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/Ender-5 Plus/CrealityV1 (RELOADED UI)/Configuration.h b/config/examples/Creality/Ender-5 Plus/CrealityV1 (RELOADED UI)/Configuration.h index 5918da6968..f811d811fa 100644 --- a/config/examples/Creality/Ender-5 Plus/CrealityV1 (RELOADED UI)/Configuration.h +++ b/config/examples/Creality/Ender-5 Plus/CrealityV1 (RELOADED UI)/Configuration.h @@ -1444,6 +1444,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2023,6 +2032,12 @@ #define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2040,15 +2055,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2234,12 +2240,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration.h index cfc8f82e09..c8f67344b3 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration.h @@ -1443,6 +1443,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2023,6 +2032,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2040,15 +2055,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2234,12 +2240,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h index 8e3a9b1db7..c9a3eb3311 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h @@ -1434,6 +1434,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2012,6 +2021,12 @@ //#define AUTO_BED_LEVELING_UBL #define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2029,15 +2044,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2223,12 +2229,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration.h index 8e58e0973a..7306c0e3ab 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration.h @@ -1436,6 +1436,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2014,6 +2023,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2031,15 +2046,6 @@ #define LEVELING_BED_TEMP 60 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2225,12 +2231,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 3.0 with BLTouch-HighTemp/Configuration.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 3.0 with BLTouch-HighTemp/Configuration.h index d478d0bef3..868488219e 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 3.0 with BLTouch-HighTemp/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 3.0 with BLTouch-HighTemp/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ #define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 70 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration.h b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration.h index f6dd509ae3..fdfe50656c 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration.h @@ -1436,6 +1436,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2014,6 +2023,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2031,15 +2046,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2225,12 +2231,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration.h b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration.h index ec8e1eb01a..db3283da95 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration.h @@ -1449,6 +1449,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2029,6 +2038,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2046,15 +2061,6 @@ #define LEVELING_BED_TEMP 55 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2244,12 +2250,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h index 3303439663..f60677f413 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h @@ -1436,6 +1436,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2014,6 +2023,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2031,15 +2046,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2225,12 +2231,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/Ender-5 S1/Configuration.h b/config/examples/Creality/Ender-5 S1/Configuration.h index 4187a70070..758ab494e7 100644 --- a/config/examples/Creality/Ender-5 S1/Configuration.h +++ b/config/examples/Creality/Ender-5 S1/Configuration.h @@ -1465,6 +1465,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2055,6 +2064,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2072,15 +2087,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2266,12 +2272,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h index 57cacd5054..b881353a21 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h @@ -1436,6 +1436,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2014,6 +2023,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2031,15 +2046,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2225,12 +2231,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration.h index 4ab0ce3e4e..1e703e4f28 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration.h @@ -1436,6 +1436,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2014,6 +2023,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2031,15 +2046,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2225,12 +2231,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration.h index 00159c35ab..f178fa2919 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration.h @@ -1434,6 +1434,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2012,6 +2021,12 @@ //#define AUTO_BED_LEVELING_UBL #define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2029,15 +2044,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2223,12 +2229,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h index 09ac2b7a68..cf77d9a4de 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -1434,6 +1434,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2012,6 +2021,12 @@ //#define AUTO_BED_LEVELING_UBL #define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2029,15 +2044,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2223,12 +2229,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 3.0 with BLTouch/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 3.0 with BLTouch/Configuration.h index 9c25a90693..b5b9f5b525 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 3.0 with BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 3.0 with BLTouch/Configuration.h @@ -1437,6 +1437,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2015,6 +2024,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2032,15 +2047,6 @@ #define LEVELING_BED_TEMP 60 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2226,12 +2232,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/Ender-5/CrealityV1/Configuration.h b/config/examples/Creality/Ender-5/CrealityV1/Configuration.h index a63c99eb2a..0d96aa5546 100644 --- a/config/examples/Creality/Ender-5/CrealityV1/Configuration.h +++ b/config/examples/Creality/Ender-5/CrealityV1/Configuration.h @@ -1436,6 +1436,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2014,6 +2023,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2031,15 +2046,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2225,12 +2231,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/Ender-5/CrealityV427/Configuration.h b/config/examples/Creality/Ender-5/CrealityV427/Configuration.h index 71b5f63898..1f48302b7a 100644 --- a/config/examples/Creality/Ender-5/CrealityV427/Configuration.h +++ b/config/examples/Creality/Ender-5/CrealityV427/Configuration.h @@ -1436,6 +1436,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2014,6 +2023,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2031,15 +2046,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2225,12 +2231,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Creality/Ender-6/Configuration.h b/config/examples/Creality/Ender-6/Configuration.h index fe65c3e2a5..e6ff8f7ad9 100644 --- a/config/examples/Creality/Ender-6/Configuration.h +++ b/config/examples/Creality/Ender-6/Configuration.h @@ -1442,6 +1442,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2022,6 +2031,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2039,15 +2054,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2233,12 +2239,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration.h b/config/examples/Dagoma/Disco Ultimate/Configuration.h index 9b0676bd79..8d05d1e05d 100644 --- a/config/examples/Dagoma/Disco Ultimate/Configuration.h +++ b/config/examples/Dagoma/Disco Ultimate/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ #define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Daycom/3DP-100/Configuration.h b/config/examples/Daycom/3DP-100/Configuration.h index c6150920c6..8f139c26a3 100644 --- a/config/examples/Daycom/3DP-100/Configuration.h +++ b/config/examples/Daycom/3DP-100/Configuration.h @@ -1439,6 +1439,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2017,6 +2026,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2034,15 +2049,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2228,12 +2234,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/EXP3D/Imprimante multifonction/Configuration.h b/config/examples/EXP3D/Imprimante multifonction/Configuration.h index b57554070f..7f26fef7c0 100644 --- a/config/examples/EXP3D/Imprimante multifonction/Configuration.h +++ b/config/examples/EXP3D/Imprimante multifonction/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/EasyThreeD/ET4000PLUS/Configuration.h b/config/examples/EasyThreeD/ET4000PLUS/Configuration.h index 17f3f2a7a9..f14090b63b 100644 --- a/config/examples/EasyThreeD/ET4000PLUS/Configuration.h +++ b/config/examples/EasyThreeD/ET4000PLUS/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Einstart-S/Configuration.h b/config/examples/Einstart-S/Configuration.h index fc7fa821bb..4cd9c79545 100644 --- a/config/examples/Einstart-S/Configuration.h +++ b/config/examples/Einstart-S/Configuration.h @@ -1440,6 +1440,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2018,6 +2027,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2035,15 +2050,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2229,12 +2235,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Elegoo/Neptune 2/Configuration.h b/config/examples/Elegoo/Neptune 2/Configuration.h index 4879996b66..25e832027a 100644 --- a/config/examples/Elegoo/Neptune 2/Configuration.h +++ b/config/examples/Elegoo/Neptune 2/Configuration.h @@ -1491,6 +1491,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2081,6 +2090,12 @@ #define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +#define Z_PROBE_END_SCRIPT "G1 X0 Y113 Z10 F2400" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2098,15 +2113,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2292,12 +2298,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -#define Z_PROBE_END_SCRIPT "G1 X0 Y113 Z10 F2400" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Eryone/Thinker SE/Configuration.h b/config/examples/Eryone/Thinker SE/Configuration.h index 48b3c2a471..2f6eef0f75 100644 --- a/config/examples/Eryone/Thinker SE/Configuration.h +++ b/config/examples/Eryone/Thinker SE/Configuration.h @@ -1457,6 +1457,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2042,6 +2051,12 @@ #define MESH_BED_LEVELING #endif +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2061,15 +2076,6 @@ #define LEVELING_BED_TEMP 60 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2257,12 +2263,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Eryone/Thinker V2/Configuration.h b/config/examples/Eryone/Thinker V2/Configuration.h index d3f52fb618..e041b24783 100644 --- a/config/examples/Eryone/Thinker V2/Configuration.h +++ b/config/examples/Eryone/Thinker V2/Configuration.h @@ -1459,6 +1459,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2043,6 +2052,12 @@ #define MESH_BED_LEVELING #endif +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2062,15 +2077,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2258,12 +2264,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/FYSETC/AIO_II/Configuration.h b/config/examples/FYSETC/AIO_II/Configuration.h index ef46840a19..7cda7d9eaf 100644 --- a/config/examples/FYSETC/AIO_II/Configuration.h +++ b/config/examples/FYSETC/AIO_II/Configuration.h @@ -1436,6 +1436,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2014,6 +2023,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2031,15 +2046,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2225,12 +2231,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/FYSETC/F6_13/Configuration.h b/config/examples/FYSETC/F6_13/Configuration.h index ab59fb128e..329174b8f8 100644 --- a/config/examples/FYSETC/F6_13/Configuration.h +++ b/config/examples/FYSETC/F6_13/Configuration.h @@ -1437,6 +1437,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2015,6 +2024,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2032,15 +2047,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2226,12 +2232,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/FYSETC/S6/Configuration.h b/config/examples/FYSETC/S6/Configuration.h index 9eac9e6694..e0c34323ac 100644 --- a/config/examples/FYSETC/S6/Configuration.h +++ b/config/examples/FYSETC/S6/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Felix/DUAL/Configuration.h b/config/examples/Felix/DUAL/Configuration.h index b265da8dad..5740659d6d 100644 --- a/config/examples/Felix/DUAL/Configuration.h +++ b/config/examples/Felix/DUAL/Configuration.h @@ -1436,6 +1436,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2014,6 +2023,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2031,15 +2046,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2225,12 +2231,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Felix/Single/Configuration.h b/config/examples/Felix/Single/Configuration.h index 564f7ebd97..479843d586 100644 --- a/config/examples/Felix/Single/Configuration.h +++ b/config/examples/Felix/Single/Configuration.h @@ -1436,6 +1436,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2014,6 +2023,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2031,15 +2046,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2225,12 +2231,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/FlashForge/Creator 2X/Configuration.h b/config/examples/FlashForge/Creator 2X/Configuration.h index 8791579fe7..8eb7059620 100644 --- a/config/examples/FlashForge/Creator 2X/Configuration.h +++ b/config/examples/FlashForge/Creator 2X/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/FlashForge/CreatorPro/Configuration.h b/config/examples/FlashForge/CreatorPro/Configuration.h index 4a4e4c7432..00a05a1fc7 100644 --- a/config/examples/FlashForge/CreatorPro/Configuration.h +++ b/config/examples/FlashForge/CreatorPro/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/FlyingBear/P902/Configuration.h b/config/examples/FlyingBear/P902/Configuration.h index f7cae72004..6f68e15b50 100644 --- a/config/examples/FlyingBear/P902/Configuration.h +++ b/config/examples/FlyingBear/P902/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/FlyingBear/P905H/Configuration.h b/config/examples/FlyingBear/P905H/Configuration.h index b5c7fc8391..7bf000ddaf 100644 --- a/config/examples/FlyingBear/P905H/Configuration.h +++ b/config/examples/FlyingBear/P905H/Configuration.h @@ -1439,6 +1439,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2018,6 +2027,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2035,15 +2050,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2229,12 +2235,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/FoamCutter/generic/Configuration.h b/config/examples/FoamCutter/generic/Configuration.h index 611fe2c72b..6b9bd99638 100644 --- a/config/examples/FoamCutter/generic/Configuration.h +++ b/config/examples/FoamCutter/generic/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/FoamCutter/rcKeith/Configuration.h b/config/examples/FoamCutter/rcKeith/Configuration.h index 43071078ea..07e38c979d 100644 --- a/config/examples/FoamCutter/rcKeith/Configuration.h +++ b/config/examples/FoamCutter/rcKeith/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/FolgerTech/FT-5 R2/Configuration.h b/config/examples/FolgerTech/FT-5 R2/Configuration.h index b5112470c7..4b4cc72559 100644 --- a/config/examples/FolgerTech/FT-5 R2/Configuration.h +++ b/config/examples/FolgerTech/FT-5 R2/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/FolgerTech/i3-2020/Configuration.h b/config/examples/FolgerTech/i3-2020/Configuration.h index 790a254544..3166405079 100644 --- a/config/examples/FolgerTech/i3-2020/Configuration.h +++ b/config/examples/FolgerTech/i3-2020/Configuration.h @@ -1437,6 +1437,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2015,6 +2024,12 @@ #define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2032,15 +2047,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2226,12 +2232,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Formbot/Raptor/Configuration.h b/config/examples/Formbot/Raptor/Configuration.h index a066054c40..58f7cc8692 100644 --- a/config/examples/Formbot/Raptor/Configuration.h +++ b/config/examples/Formbot/Raptor/Configuration.h @@ -1526,6 +1526,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2124,6 +2133,12 @@ //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +#define Z_PROBE_END_SCRIPT "M280 P0 S90" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2141,15 +2156,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2335,12 +2341,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -#define Z_PROBE_END_SCRIPT "M280 P0 S90" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Formbot/T_Rex_2+/Configuration.h b/config/examples/Formbot/T_Rex_2+/Configuration.h index 93cdd2feb4..9a6a8a2f1c 100644 --- a/config/examples/Formbot/T_Rex_2+/Configuration.h +++ b/config/examples/Formbot/T_Rex_2+/Configuration.h @@ -1436,6 +1436,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2014,6 +2023,12 @@ #define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +#define Z_PROBE_END_SCRIPT "M280 P0 S90" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2031,15 +2046,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2225,12 +2231,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -#define Z_PROBE_END_SCRIPT "M280 P0 S90" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Formbot/T_Rex_3/Configuration.h b/config/examples/Formbot/T_Rex_3/Configuration.h index 3d549cac3a..879f01af85 100644 --- a/config/examples/Formbot/T_Rex_3/Configuration.h +++ b/config/examples/Formbot/T_Rex_3/Configuration.h @@ -1442,6 +1442,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2026,6 +2035,12 @@ #define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +#define Z_PROBE_END_SCRIPT "M280 P0 S90" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2043,15 +2058,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2237,12 +2243,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -#define Z_PROBE_END_SCRIPT "M280 P0 S90" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Geeetech/A10/Configuration.h b/config/examples/Geeetech/A10/Configuration.h index 979a6b8fec..9620ae7f18 100644 --- a/config/examples/Geeetech/A10/Configuration.h +++ b/config/examples/Geeetech/A10/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Geeetech/A10D/Configuration.h b/config/examples/Geeetech/A10D/Configuration.h index 124aa81540..da60018379 100644 --- a/config/examples/Geeetech/A10D/Configuration.h +++ b/config/examples/Geeetech/A10D/Configuration.h @@ -1434,6 +1434,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2014,6 +2023,12 @@ #define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2031,15 +2046,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2225,12 +2231,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Geeetech/A10M/Stock LCD/Configuration.h b/config/examples/Geeetech/A10M/Stock LCD/Configuration.h index 1d8a2c5796..e8a879da9c 100644 --- a/config/examples/Geeetech/A10M/Stock LCD/Configuration.h +++ b/config/examples/Geeetech/A10M/Stock LCD/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2015,6 +2024,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2032,15 +2047,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2226,12 +2232,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration.h b/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration.h index d293d0b6d6..a17c2d9fa7 100644 --- a/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration.h +++ b/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2015,6 +2024,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2032,15 +2047,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2226,12 +2232,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Geeetech/A10PRO/Configuration.h b/config/examples/Geeetech/A10PRO/Configuration.h index c44f24994f..f81633a0a4 100644 --- a/config/examples/Geeetech/A10PRO/Configuration.h +++ b/config/examples/Geeetech/A10PRO/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Geeetech/A10T/Stock LCD/Configuration.h b/config/examples/Geeetech/A10T/Stock LCD/Configuration.h index c3c3ecd14e..8e79e5e15a 100644 --- a/config/examples/Geeetech/A10T/Stock LCD/Configuration.h +++ b/config/examples/Geeetech/A10T/Stock LCD/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2016,6 +2025,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2033,15 +2048,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2227,12 +2233,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration.h b/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration.h index 181a382c21..5540c71814 100644 --- a/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration.h +++ b/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2016,6 +2025,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2033,15 +2048,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2227,12 +2233,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Geeetech/A20/Configuration.h b/config/examples/Geeetech/A20/Configuration.h index 9cd986914d..7ac972449a 100644 --- a/config/examples/Geeetech/A20/Configuration.h +++ b/config/examples/Geeetech/A20/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2014,6 +2023,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2031,15 +2046,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2225,12 +2231,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Geeetech/A20M/Configuration.h b/config/examples/Geeetech/A20M/Configuration.h index 32bc848c7a..acd00f1ab9 100644 --- a/config/examples/Geeetech/A20M/Configuration.h +++ b/config/examples/Geeetech/A20M/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2015,6 +2024,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +#define Z_PROBE_END_SCRIPT "G1 Z5 F6000\nG1 X10 Y10\nG1 Z0.2" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2032,15 +2047,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2226,12 +2232,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -#define Z_PROBE_END_SCRIPT "G1 Z5 F6000\nG1 X10 Y10\nG1 Z0.2" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Geeetech/A20T/Configuration.h b/config/examples/Geeetech/A20T/Configuration.h index 21932dbbf5..2b52f9bed3 100644 --- a/config/examples/Geeetech/A20T/Configuration.h +++ b/config/examples/Geeetech/A20T/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2016,6 +2025,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2033,15 +2048,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2227,12 +2233,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Geeetech/A30/Configuration.h b/config/examples/Geeetech/A30/Configuration.h index c695413a9c..1adfe0b81f 100644 --- a/config/examples/Geeetech/A30/Configuration.h +++ b/config/examples/Geeetech/A30/Configuration.h @@ -1433,6 +1433,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2012,6 +2021,12 @@ #define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2029,15 +2044,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2223,12 +2229,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Geeetech/A30M/Configuration.h b/config/examples/Geeetech/A30M/Configuration.h index ac39c0feb4..76787e042a 100644 --- a/config/examples/Geeetech/A30M/Configuration.h +++ b/config/examples/Geeetech/A30M/Configuration.h @@ -1433,6 +1433,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2012,6 +2021,12 @@ #define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2029,15 +2044,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2223,12 +2229,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Geeetech/A30T/Configuration.h b/config/examples/Geeetech/A30T/Configuration.h index 6084f02023..ea3ff74f75 100644 --- a/config/examples/Geeetech/A30T/Configuration.h +++ b/config/examples/Geeetech/A30T/Configuration.h @@ -1433,6 +1433,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2012,6 +2021,12 @@ #define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2029,15 +2044,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2223,12 +2229,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Geeetech/D200/Configuration.h b/config/examples/Geeetech/D200/Configuration.h index 392e7c2ec6..ed65622dec 100644 --- a/config/examples/Geeetech/D200/Configuration.h +++ b/config/examples/Geeetech/D200/Configuration.h @@ -1433,6 +1433,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2012,6 +2021,12 @@ #define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2029,15 +2044,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2223,12 +2229,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Geeetech/Duplicator5/Configuration.h b/config/examples/Geeetech/Duplicator5/Configuration.h index b7282ae832..7f931fef30 100644 --- a/config/examples/Geeetech/Duplicator5/Configuration.h +++ b/config/examples/Geeetech/Duplicator5/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Geeetech/E180/Configuration.h b/config/examples/Geeetech/E180/Configuration.h index 841970310a..003148a369 100644 --- a/config/examples/Geeetech/E180/Configuration.h +++ b/config/examples/Geeetech/E180/Configuration.h @@ -1434,6 +1434,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ #define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Geeetech/GT2560/Configuration.h b/config/examples/Geeetech/GT2560/Configuration.h index 469c032dfd..eff90c903e 100644 --- a/config/examples/Geeetech/GT2560/Configuration.h +++ b/config/examples/Geeetech/GT2560/Configuration.h @@ -1440,6 +1440,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2018,6 +2027,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2035,15 +2050,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2229,12 +2235,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h index 95d3295230..59d75d30ef 100644 --- a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h +++ b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Geeetech/M201/Configuration.h b/config/examples/Geeetech/M201/Configuration.h index 1aca6b4d8d..fe3cd46a73 100644 --- a/config/examples/Geeetech/M201/Configuration.h +++ b/config/examples/Geeetech/M201/Configuration.h @@ -1433,6 +1433,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2012,6 +2021,12 @@ #define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2029,15 +2044,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2223,12 +2229,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Geeetech/MeCreator2/Configuration.h b/config/examples/Geeetech/MeCreator2/Configuration.h index a311949c5e..a3bb421594 100644 --- a/config/examples/Geeetech/MeCreator2/Configuration.h +++ b/config/examples/Geeetech/MeCreator2/Configuration.h @@ -1434,6 +1434,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2012,6 +2021,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2029,15 +2044,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2223,12 +2229,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Geeetech/Me_creator/Configuration.h b/config/examples/Geeetech/Me_creator/Configuration.h index 1014fc8c23..fd2c2382eb 100644 --- a/config/examples/Geeetech/Me_creator/Configuration.h +++ b/config/examples/Geeetech/Me_creator/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Geeetech/Me_ducer/Configuration.h b/config/examples/Geeetech/Me_ducer/Configuration.h index 8492b12d56..d32820fa02 100644 --- a/config/examples/Geeetech/Me_ducer/Configuration.h +++ b/config/examples/Geeetech/Me_ducer/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Geeetech/PI3A PRO/Configuration.h b/config/examples/Geeetech/PI3A PRO/Configuration.h index facea8441e..f58ddf6ada 100644 --- a/config/examples/Geeetech/PI3A PRO/Configuration.h +++ b/config/examples/Geeetech/PI3A PRO/Configuration.h @@ -1445,6 +1445,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2023,6 +2032,12 @@ #define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2040,15 +2055,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2234,12 +2240,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h index ac86d9e258..dfd91f4132 100644 --- a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h @@ -1445,6 +1445,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2023,6 +2032,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2040,15 +2055,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2234,12 +2240,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h index 1321f89cee..a07d4b4b87 100644 --- a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h @@ -1445,6 +1445,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2023,6 +2032,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2040,15 +2055,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2234,12 +2240,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h index c9c316dbab..fd39551032 100644 --- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h index 4f16d17b25..000d68ed59 100644 --- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/HMS434/Configuration.h b/config/examples/HMS434/Configuration.h index b52998b6f0..10f231b823 100644 --- a/config/examples/HMS434/Configuration.h +++ b/config/examples/HMS434/Configuration.h @@ -1433,6 +1433,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2011,6 +2020,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2028,15 +2043,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2222,12 +2228,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Infitary/i3-M508/Configuration.h b/config/examples/Infitary/i3-M508/Configuration.h index 65598e96c3..ea542ebf98 100644 --- a/config/examples/Infitary/i3-M508/Configuration.h +++ b/config/examples/Infitary/i3-M508/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Intamsys/FunmatHT 4988/Configuration.h b/config/examples/Intamsys/FunmatHT 4988/Configuration.h index c297dad0a5..77ffd98d86 100644 --- a/config/examples/Intamsys/FunmatHT 4988/Configuration.h +++ b/config/examples/Intamsys/FunmatHT 4988/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL #define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/JGAurora/A1/Configuration.h b/config/examples/JGAurora/A1/Configuration.h index 93778a558c..95a5b01f22 100644 --- a/config/examples/JGAurora/A1/Configuration.h +++ b/config/examples/JGAurora/A1/Configuration.h @@ -1439,6 +1439,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2017,6 +2026,12 @@ //#define AUTO_BED_LEVELING_UBL #define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2034,15 +2049,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2228,12 +2234,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/JGAurora/A3/Configuration.h b/config/examples/JGAurora/A3/Configuration.h index b8056d3642..886042af3a 100644 --- a/config/examples/JGAurora/A3/Configuration.h +++ b/config/examples/JGAurora/A3/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/JGAurora/A5/Configuration.h b/config/examples/JGAurora/A5/Configuration.h index 100f6adfe4..969889f25e 100644 --- a/config/examples/JGAurora/A5/Configuration.h +++ b/config/examples/JGAurora/A5/Configuration.h @@ -1443,6 +1443,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2021,6 +2030,12 @@ //#define AUTO_BED_LEVELING_UBL #define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2038,15 +2053,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2232,12 +2238,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/JGAurora/A5S/Configuration.h b/config/examples/JGAurora/A5S/Configuration.h index ec64177601..c1652b693b 100644 --- a/config/examples/JGAurora/A5S/Configuration.h +++ b/config/examples/JGAurora/A5S/Configuration.h @@ -1439,6 +1439,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2017,6 +2026,12 @@ //#define AUTO_BED_LEVELING_UBL #define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2034,15 +2049,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2228,12 +2234,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/JGAurora/Magic/Configuration.h b/config/examples/JGAurora/Magic/Configuration.h index 7e03c20bfb..a7f3de4e58 100644 --- a/config/examples/JGAurora/Magic/Configuration.h +++ b/config/examples/JGAurora/Magic/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL #define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Kingroon/KP3/Configuration.h b/config/examples/Kingroon/KP3/Configuration.h index 81c055a23e..51e67e911b 100644 --- a/config/examples/Kingroon/KP3/Configuration.h +++ b/config/examples/Kingroon/KP3/Configuration.h @@ -1434,6 +1434,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2012,6 +2021,12 @@ //#define AUTO_BED_LEVELING_UBL #define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2029,15 +2044,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2223,12 +2229,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Kingroon/KP3S/Configuration.h b/config/examples/Kingroon/KP3S/Configuration.h index b8b06aad21..c7c7436b40 100644 --- a/config/examples/Kingroon/KP3S/Configuration.h +++ b/config/examples/Kingroon/KP3S/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL #define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Kingroon/KP3S_Pro/Configuration.h b/config/examples/Kingroon/KP3S_Pro/Configuration.h index d4470e7046..3c8493e657 100644 --- a/config/examples/Kingroon/KP3S_Pro/Configuration.h +++ b/config/examples/Kingroon/KP3S_Pro/Configuration.h @@ -1466,6 +1466,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2047,6 +2056,12 @@ #endif //#define AUTO_BED_LEVELING_UBL +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2064,15 +2079,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2258,12 +2264,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Kingroon/KP5L-DIY/Configuration.h b/config/examples/Kingroon/KP5L-DIY/Configuration.h index 79cd3e8bd6..7c29dea618 100644 --- a/config/examples/Kingroon/KP5L-DIY/Configuration.h +++ b/config/examples/Kingroon/KP5L-DIY/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Labists/ET4/Configuration.h b/config/examples/Labists/ET4/Configuration.h index fb333be34c..1f6c3fff58 100644 --- a/config/examples/Labists/ET4/Configuration.h +++ b/config/examples/Labists/ET4/Configuration.h @@ -1441,6 +1441,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2019,6 +2028,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2036,15 +2051,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2230,12 +2236,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Longer/LK5/Configuration.h b/config/examples/Longer/LK5/Configuration.h index 5a0dd07823..83b2bcd7e9 100644 --- a/config/examples/Longer/LK5/Configuration.h +++ b/config/examples/Longer/LK5/Configuration.h @@ -1436,6 +1436,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2014,6 +2023,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2031,15 +2046,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2225,12 +2231,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/LulzBot/Mini2/Teensy/Configuration.h b/config/examples/LulzBot/Mini2/Teensy/Configuration.h index 054f6d5d68..4286d306cf 100644 --- a/config/examples/LulzBot/Mini2/Teensy/Configuration.h +++ b/config/examples/LulzBot/Mini2/Teensy/Configuration.h @@ -1455,6 +1455,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2033,6 +2042,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2050,15 +2065,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2244,12 +2250,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/LulzBot/TAZ4/Configuration.h b/config/examples/LulzBot/TAZ4/Configuration.h index bb8d27c002..d3077c22e9 100644 --- a/config/examples/LulzBot/TAZ4/Configuration.h +++ b/config/examples/LulzBot/TAZ4/Configuration.h @@ -1446,6 +1446,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2024,6 +2033,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2041,15 +2056,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2235,12 +2241,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/MBot/Cube/Configuration.h b/config/examples/MBot/Cube/Configuration.h index 4dab38c544..8e05358cca 100644 --- a/config/examples/MBot/Cube/Configuration.h +++ b/config/examples/MBot/Cube/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/MakerFarm/Pegasus 12/Configuration.h b/config/examples/MakerFarm/Pegasus 12/Configuration.h index e2f37d2e43..0557303d89 100644 --- a/config/examples/MakerFarm/Pegasus 12/Configuration.h +++ b/config/examples/MakerFarm/Pegasus 12/Configuration.h @@ -1441,6 +1441,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2019,6 +2028,12 @@ #define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2036,15 +2051,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2230,12 +2236,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/MakerParts/Configuration.h b/config/examples/MakerParts/Configuration.h index 6d4ed58840..da001fe3b8 100644 --- a/config/examples/MakerParts/Configuration.h +++ b/config/examples/MakerParts/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/MakerTech3D/Proforge2sDual/Configuration.h b/config/examples/MakerTech3D/Proforge2sDual/Configuration.h index e61fadb9f8..359b0a30bf 100644 --- a/config/examples/MakerTech3D/Proforge2sDual/Configuration.h +++ b/config/examples/MakerTech3D/Proforge2sDual/Configuration.h @@ -1438,6 +1438,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2016,6 +2025,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2033,15 +2048,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2227,12 +2233,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Malyan/M150/Configuration.h b/config/examples/Malyan/M150/Configuration.h index 5d06103ec6..81180d679a 100644 --- a/config/examples/Malyan/M150/Configuration.h +++ b/config/examples/Malyan/M150/Configuration.h @@ -1455,6 +1455,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2041,6 +2050,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2058,15 +2073,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2252,12 +2258,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Malyan/M180/Configuration.h b/config/examples/Malyan/M180/Configuration.h index 9ec50cad4c..5676224b37 100644 --- a/config/examples/Malyan/M180/Configuration.h +++ b/config/examples/Malyan/M180/Configuration.h @@ -1436,6 +1436,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2014,6 +2023,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2031,15 +2046,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2225,12 +2231,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Malyan/M200/Configuration.h b/config/examples/Malyan/M200/Configuration.h index 8cb116cc8b..411a57b978 100644 --- a/config/examples/Malyan/M200/Configuration.h +++ b/config/examples/Malyan/M200/Configuration.h @@ -1441,6 +1441,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2019,6 +2028,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2036,15 +2051,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2230,12 +2236,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Micromake/C1/basic/Configuration.h b/config/examples/Micromake/C1/basic/Configuration.h index 92c124d441..4f288df57f 100644 --- a/config/examples/Micromake/C1/basic/Configuration.h +++ b/config/examples/Micromake/C1/basic/Configuration.h @@ -1439,6 +1439,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2017,6 +2026,12 @@ //#define AUTO_BED_LEVELING_UBL #define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2034,15 +2049,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2228,12 +2234,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Micromake/C1/enhanced/Configuration.h b/config/examples/Micromake/C1/enhanced/Configuration.h index 0295e2bedc..a1bf998072 100644 --- a/config/examples/Micromake/C1/enhanced/Configuration.h +++ b/config/examples/Micromake/C1/enhanced/Configuration.h @@ -1439,6 +1439,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2017,6 +2026,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2034,15 +2049,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2228,12 +2234,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Mks/Robin/Configuration.h b/config/examples/Mks/Robin/Configuration.h index eaa9021efb..4d26e52e33 100644 --- a/config/examples/Mks/Robin/Configuration.h +++ b/config/examples/Mks/Robin/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Mks/Robin_Lite3/Configuration.h b/config/examples/Mks/Robin_Lite3/Configuration.h index 36f65c6b3d..22214ea046 100644 --- a/config/examples/Mks/Robin_Lite3/Configuration.h +++ b/config/examples/Mks/Robin_Lite3/Configuration.h @@ -1443,6 +1443,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2021,6 +2030,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2038,15 +2053,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2232,12 +2238,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Mks/Robin_Pro/Configuration.h b/config/examples/Mks/Robin_Pro/Configuration.h index 4f36e0ebb0..bbf3668f67 100644 --- a/config/examples/Mks/Robin_Pro/Configuration.h +++ b/config/examples/Mks/Robin_Pro/Configuration.h @@ -1437,6 +1437,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2015,6 +2024,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2032,15 +2047,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2226,12 +2232,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Mks/Sbase/Configuration.h b/config/examples/Mks/Sbase/Configuration.h index a9a58de46c..3a907937fb 100644 --- a/config/examples/Mks/Sbase/Configuration.h +++ b/config/examples/Mks/Sbase/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Modix/Big60/Configuration.h b/config/examples/Modix/Big60/Configuration.h index dba4af19e3..dbea6dd06f 100644 --- a/config/examples/Modix/Big60/Configuration.h +++ b/config/examples/Modix/Big60/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ #define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Nextion/Configuration.h b/config/examples/Nextion/Configuration.h index 93acc42131..08cb74121f 100644 --- a/config/examples/Nextion/Configuration.h +++ b/config/examples/Nextion/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/ORD Bot/Hadron/Sanguinololu/Configuration.h b/config/examples/ORD Bot/Hadron/Sanguinololu/Configuration.h index bd8346e931..9f21c50263 100644 --- a/config/examples/ORD Bot/Hadron/Sanguinololu/Configuration.h +++ b/config/examples/ORD Bot/Hadron/Sanguinololu/Configuration.h @@ -1466,6 +1466,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2044,6 +2053,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2061,15 +2076,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2255,12 +2261,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Opulo/Lumen_REV3/Configuration.h b/config/examples/Opulo/Lumen_REV3/Configuration.h index 4a80746af3..8953508288 100644 --- a/config/examples/Opulo/Lumen_REV3/Configuration.h +++ b/config/examples/Opulo/Lumen_REV3/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Opulo/Lumen_REV4/Configuration.h b/config/examples/Opulo/Lumen_REV4/Configuration.h index 0e33c51990..0b35ebcaa8 100644 --- a/config/examples/Opulo/Lumen_REV4/Configuration.h +++ b/config/examples/Opulo/Lumen_REV4/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Ortur 4/Configuration.h b/config/examples/Ortur 4/Configuration.h index d54aab2b89..8fbd0313d7 100644 --- a/config/examples/Ortur 4/Configuration.h +++ b/config/examples/Ortur 4/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +#define Z_PROBE_END_SCRIPT "G1 Z15 F12000\nG1 X15 Y15\nG1 Z20\nM420 S1\nM420 Z3\nM500" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -#define Z_PROBE_END_SCRIPT "G1 Z15 F12000\nG1 X15 Y15\nG1 Z20\nM420 S1\nM420 Z3\nM500" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Polargraph/Configuration.h b/config/examples/Polargraph/Configuration.h index 21917e9a74..3b8b523106 100644 --- a/config/examples/Polargraph/Configuration.h +++ b/config/examples/Polargraph/Configuration.h @@ -1439,6 +1439,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2017,6 +2026,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2034,15 +2049,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2228,12 +2234,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Printrbot/PrintrboardG2/Configuration.h b/config/examples/Printrbot/PrintrboardG2/Configuration.h index b256c225e7..ddeeda98bb 100644 --- a/config/examples/Printrbot/PrintrboardG2/Configuration.h +++ b/config/examples/Printrbot/PrintrboardG2/Configuration.h @@ -1437,6 +1437,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2015,6 +2024,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2032,15 +2047,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2226,12 +2232,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Printrbot/Simple Metal RevD/Configuration.h b/config/examples/Printrbot/Simple Metal RevD/Configuration.h index 3df9f93c18..2199e4f50a 100644 --- a/config/examples/Printrbot/Simple Metal RevD/Configuration.h +++ b/config/examples/Printrbot/Simple Metal RevD/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Prusa/MK3/Configuration.h b/config/examples/Prusa/MK3/Configuration.h index 9f48db4f53..4f0c55c5ac 100644 --- a/config/examples/Prusa/MK3/Configuration.h +++ b/config/examples/Prusa/MK3/Configuration.h @@ -1465,6 +1465,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2046,6 +2055,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +#define Z_PROBE_END_SCRIPT "G1 X12 Y6 F7200\nG1 Z0 F8000" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2063,15 +2078,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2257,12 +2263,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -#define Z_PROBE_END_SCRIPT "G1 X12 Y6 F7200\nG1 Z0 F8000" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h index 980626252b..db6b40b30e 100644 --- a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h +++ b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h @@ -1455,6 +1455,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2037,6 +2046,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2054,15 +2069,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2248,12 +2254,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Qidi/Qidi 1/Configuration.h b/config/examples/Qidi/Qidi 1/Configuration.h index 843c6ef748..bb57aee8f0 100644 --- a/config/examples/Qidi/Qidi 1/Configuration.h +++ b/config/examples/Qidi/Qidi 1/Configuration.h @@ -1436,6 +1436,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2014,6 +2023,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2031,15 +2046,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2225,12 +2231,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Raiscube/A8r/Configuration.h b/config/examples/Raiscube/A8r/Configuration.h index e01ae2592d..30be5cc153 100644 --- a/config/examples/Raiscube/A8r/Configuration.h +++ b/config/examples/Raiscube/A8r/Configuration.h @@ -1453,6 +1453,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2052,6 +2061,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2069,15 +2084,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2263,12 +2269,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/RapideLite/RL200/Configuration.h b/config/examples/RapideLite/RL200/Configuration.h index 9ce0551413..7ec81e0df9 100644 --- a/config/examples/RapideLite/RL200/Configuration.h +++ b/config/examples/RapideLite/RL200/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Renkforce/RF100/Configuration.h b/config/examples/Renkforce/RF100/Configuration.h index 1bd1d8aec4..534498a151 100644 --- a/config/examples/Renkforce/RF100/Configuration.h +++ b/config/examples/Renkforce/RF100/Configuration.h @@ -1440,6 +1440,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2018,6 +2027,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2035,15 +2050,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2229,12 +2235,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Renkforce/RF100XL/Configuration.h b/config/examples/Renkforce/RF100XL/Configuration.h index 889ee71fa7..598beeb458 100644 --- a/config/examples/Renkforce/RF100XL/Configuration.h +++ b/config/examples/Renkforce/RF100XL/Configuration.h @@ -1440,6 +1440,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2018,6 +2027,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2035,15 +2050,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2229,12 +2235,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Renkforce/RF100v2/Configuration.h b/config/examples/Renkforce/RF100v2/Configuration.h index 47c08a02cc..e0da613912 100644 --- a/config/examples/Renkforce/RF100v2/Configuration.h +++ b/config/examples/Renkforce/RF100v2/Configuration.h @@ -1440,6 +1440,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2018,6 +2027,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2035,15 +2050,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2229,12 +2235,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/RepRapPro/Huxley/Configuration.h b/config/examples/RepRapPro/Huxley/Configuration.h index 324ea0f691..32dcf777cb 100644 --- a/config/examples/RepRapPro/Huxley/Configuration.h +++ b/config/examples/RepRapPro/Huxley/Configuration.h @@ -1476,6 +1476,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2063,6 +2072,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2080,15 +2095,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2274,12 +2280,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/RepRapWorld/Megatronics/Configuration.h b/config/examples/RepRapWorld/Megatronics/Configuration.h index 6e3d441db0..38e55371e5 100644 --- a/config/examples/RepRapWorld/Megatronics/Configuration.h +++ b/config/examples/RepRapWorld/Megatronics/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/RepRapWorld/Minitronics20/CNC/Configuration.h b/config/examples/RepRapWorld/Minitronics20/CNC/Configuration.h index fa14ce3566..7200d55647 100644 --- a/config/examples/RepRapWorld/Minitronics20/CNC/Configuration.h +++ b/config/examples/RepRapWorld/Minitronics20/CNC/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/RigidBot/Configuration.h b/config/examples/RigidBot/Configuration.h index fff81af318..b6be9d57b2 100644 --- a/config/examples/RigidBot/Configuration.h +++ b/config/examples/RigidBot/Configuration.h @@ -1449,6 +1449,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2027,6 +2036,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2044,15 +2059,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2238,12 +2244,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Robo3D/R1+/Configuration.h b/config/examples/Robo3D/R1+/Configuration.h index c3c4676ed1..0febbac749 100644 --- a/config/examples/Robo3D/R1+/Configuration.h +++ b/config/examples/Robo3D/R1+/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/SCARA/MP_SCARA/Configuration.h b/config/examples/SCARA/MP_SCARA/Configuration.h index 0951f74ea3..c6b3de4b22 100644 --- a/config/examples/SCARA/MP_SCARA/Configuration.h +++ b/config/examples/SCARA/MP_SCARA/Configuration.h @@ -1437,6 +1437,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2015,6 +2024,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2032,15 +2047,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2226,12 +2232,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/SCARA/Morgan/Configuration.h b/config/examples/SCARA/Morgan/Configuration.h index 051300b0cd..723ed229d8 100644 --- a/config/examples/SCARA/Morgan/Configuration.h +++ b/config/examples/SCARA/Morgan/Configuration.h @@ -1436,6 +1436,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2014,6 +2023,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2031,15 +2046,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2225,12 +2231,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration.h b/config/examples/STM32/Black_STM32F407VET6/Configuration.h index cc19399b4f..31c7c85609 100644 --- a/config/examples/STM32/Black_STM32F407VET6/Configuration.h +++ b/config/examples/STM32/Black_STM32F407VET6/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/STM32/STM32F103RE/Configuration.h b/config/examples/STM32/STM32F103RE/Configuration.h index e6c29ace80..6d1b724e2d 100644 --- a/config/examples/STM32/STM32F103RE/Configuration.h +++ b/config/examples/STM32/STM32F103RE/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Simax/Mi-M200/Configuration.h b/config/examples/Simax/Mi-M200/Configuration.h index 946d9c4464..40b73a5fba 100644 --- a/config/examples/Simax/Mi-M200/Configuration.h +++ b/config/examples/Simax/Mi-M200/Configuration.h @@ -1436,6 +1436,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2014,6 +2023,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2031,15 +2046,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2225,12 +2231,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Simulator/Configuration.h b/config/examples/Simulator/Configuration.h index 187af98b50..364f6ee195 100644 --- a/config/examples/Simulator/Configuration.h +++ b/config/examples/Simulator/Configuration.h @@ -1452,6 +1452,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2030,6 +2039,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2047,15 +2062,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2241,12 +2247,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration.h b/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration.h index 450463dc45..016696234a 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration.h @@ -1443,6 +1443,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2026,6 +2035,12 @@ #endif //#define AUTO_BED_LEVELING_UBL +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +#define Z_PROBE_END_SCRIPT "G1 X173 Y125 F3000\nG1 Z10 F1000" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2043,15 +2058,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2237,12 +2243,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -#define Z_PROBE_END_SCRIPT "G1 X173 Y125 F3000\nG1 Z10 F1000" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration.h index d3eda8abe4..64f2fb0ece 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -1441,6 +1441,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2024,6 +2033,12 @@ #endif //#define AUTO_BED_LEVELING_UBL +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +#define Z_PROBE_END_SCRIPT "G1 X173 Y125 F3000\nG1 Z0 F240" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2041,15 +2056,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2235,12 +2241,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -#define Z_PROBE_END_SCRIPT "G1 X173 Y125 F3000\nG1 Z0 F240" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration.h b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration.h index 0c72953ba5..33546e76de 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration.h @@ -1443,6 +1443,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2026,6 +2035,12 @@ //#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_BILINEAR +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +#define Z_PROBE_END_SCRIPT "G1 X173 Y125 F3000\nG1 Z0 F240" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2043,15 +2058,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2237,12 +2243,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -#define Z_PROBE_END_SCRIPT "G1 X173 Y125 F3000\nG1 Z0 F240" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Sovol/SV-01/CrealityV22/Configuration.h b/config/examples/Sovol/SV-01/CrealityV22/Configuration.h index 44620b5cda..794162355f 100644 --- a/config/examples/Sovol/SV-01/CrealityV22/Configuration.h +++ b/config/examples/Sovol/SV-01/CrealityV22/Configuration.h @@ -1440,6 +1440,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2023,6 +2032,12 @@ #endif //#define AUTO_BED_LEVELING_UBL +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2040,15 +2055,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2234,12 +2240,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Sovol/SV-01/CrealityV221/Configuration.h b/config/examples/Sovol/SV-01/CrealityV221/Configuration.h index 083cfd5d35..2c95ca0381 100644 --- a/config/examples/Sovol/SV-01/CrealityV221/Configuration.h +++ b/config/examples/Sovol/SV-01/CrealityV221/Configuration.h @@ -1440,6 +1440,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2023,6 +2032,12 @@ #endif //#define AUTO_BED_LEVELING_UBL +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2040,15 +2055,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2234,12 +2240,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Sovol/SV-02/Configuration.h b/config/examples/Sovol/SV-02/Configuration.h index 1a8cf17919..8ff02e64db 100644 --- a/config/examples/Sovol/SV-02/Configuration.h +++ b/config/examples/Sovol/SV-02/Configuration.h @@ -1440,6 +1440,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2023,6 +2032,12 @@ #endif //#define AUTO_BED_LEVELING_UBL +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2040,15 +2055,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2234,12 +2240,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Sovol/SV-03/Configuration.h b/config/examples/Sovol/SV-03/Configuration.h index 6e662786b6..cc0032a61e 100644 --- a/config/examples/Sovol/SV-03/Configuration.h +++ b/config/examples/Sovol/SV-03/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Sunlu/S8/Configuration.h b/config/examples/Sunlu/S8/Configuration.h index d91b1ed642..c18590a496 100644 --- a/config/examples/Sunlu/S8/Configuration.h +++ b/config/examples/Sunlu/S8/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2014,6 +2023,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2031,15 +2046,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2225,12 +2231,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Sunlu/T3/Configuration.h b/config/examples/Sunlu/T3/Configuration.h index b142532463..41c2c03332 100644 --- a/config/examples/Sunlu/T3/Configuration.h +++ b/config/examples/Sunlu/T3/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/TPARA/AXEL_TPARA/Configuration.h b/config/examples/TPARA/AXEL_TPARA/Configuration.h index 94bde23a01..f8868e498c 100644 --- a/config/examples/TPARA/AXEL_TPARA/Configuration.h +++ b/config/examples/TPARA/AXEL_TPARA/Configuration.h @@ -1439,6 +1439,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2019,6 +2028,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2036,15 +2051,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2230,12 +2236,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Tevo/Michelangelo/Configuration.h b/config/examples/Tevo/Michelangelo/Configuration.h index 53f26b7205..2706a85b66 100644 --- a/config/examples/Tevo/Michelangelo/Configuration.h +++ b/config/examples/Tevo/Michelangelo/Configuration.h @@ -1436,6 +1436,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2014,6 +2023,12 @@ //#define AUTO_BED_LEVELING_UBL #define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2031,15 +2046,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2225,12 +2231,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Tevo/Nereus/Configuration.h b/config/examples/Tevo/Nereus/Configuration.h index 908d8272ea..e21dd265b8 100644 --- a/config/examples/Tevo/Nereus/Configuration.h +++ b/config/examples/Tevo/Nereus/Configuration.h @@ -1436,6 +1436,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2014,6 +2023,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2031,15 +2046,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2225,12 +2231,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Tevo/Tarantula Pro/MKS Gen_L/Configuration.h b/config/examples/Tevo/Tarantula Pro/MKS Gen_L/Configuration.h index f06c72766f..73d6d5cfec 100644 --- a/config/examples/Tevo/Tarantula Pro/MKS Gen_L/Configuration.h +++ b/config/examples/Tevo/Tarantula Pro/MKS Gen_L/Configuration.h @@ -1436,6 +1436,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2014,6 +2023,12 @@ //#define AUTO_BED_LEVELING_UBL #define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2031,15 +2046,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2225,12 +2231,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Tevo/Tarantula Pro/MKS SGen_L/Configuration.h b/config/examples/Tevo/Tarantula Pro/MKS SGen_L/Configuration.h index e64c8f6816..6c7aa5c665 100644 --- a/config/examples/Tevo/Tarantula Pro/MKS SGen_L/Configuration.h +++ b/config/examples/Tevo/Tarantula Pro/MKS SGen_L/Configuration.h @@ -1436,6 +1436,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2014,6 +2023,12 @@ //#define AUTO_BED_LEVELING_UBL #define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2031,15 +2046,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2225,12 +2231,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h index 8e04ef164c..45ed86c19f 100644 --- a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h +++ b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h @@ -1436,6 +1436,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2014,6 +2023,12 @@ //#define AUTO_BED_LEVELING_UBL #define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2031,15 +2046,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2225,12 +2231,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Tevo/Tornado/V2 (MKS Gen_L)/Configuration.h b/config/examples/Tevo/Tornado/V2 (MKS Gen_L)/Configuration.h index 9ca9437d66..a755064ffe 100644 --- a/config/examples/Tevo/Tornado/V2 (MKS Gen_L)/Configuration.h +++ b/config/examples/Tevo/Tornado/V2 (MKS Gen_L)/Configuration.h @@ -1436,6 +1436,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2014,6 +2023,12 @@ //#define AUTO_BED_LEVELING_UBL #define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2031,15 +2046,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2225,12 +2231,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration.h b/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration.h index 8b3e4970fa..961a8996b4 100644 --- a/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration.h +++ b/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LB, RB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/TinyBoy2/Configuration.h b/config/examples/TinyBoy2/Configuration.h index 25c4870601..72ba4aa90c 100644 --- a/config/examples/TinyBoy2/Configuration.h +++ b/config/examples/TinyBoy2/Configuration.h @@ -1475,6 +1475,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2058,6 +2067,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2075,15 +2090,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2269,12 +2275,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Tronxy/D01/CXY-v6-191017 board/Configuration.h b/config/examples/Tronxy/D01/CXY-v6-191017 board/Configuration.h index b7976f4e14..e370befdb0 100644 --- a/config/examples/Tronxy/D01/CXY-v6-191017 board/Configuration.h +++ b/config/examples/Tronxy/D01/CXY-v6-191017 board/Configuration.h @@ -1444,6 +1444,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2022,6 +2031,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2039,15 +2054,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2233,12 +2239,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Tronxy/X1/Configuration.h b/config/examples/Tronxy/X1/Configuration.h index bdbe79783c..260945e59d 100644 --- a/config/examples/Tronxy/X1/Configuration.h +++ b/config/examples/Tronxy/X1/Configuration.h @@ -1436,6 +1436,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2014,6 +2023,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2031,15 +2046,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2225,12 +2231,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Tronxy/X3A/Configuration.h b/config/examples/Tronxy/X3A/Configuration.h index a8139c2f34..cbdab9d351 100644 --- a/config/examples/Tronxy/X3A/Configuration.h +++ b/config/examples/Tronxy/X3A/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2017,6 +2026,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2034,15 +2049,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2228,12 +2234,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration.h b/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration.h index ef884c9392..d2482d09d1 100644 --- a/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration.h +++ b/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration.h @@ -1436,6 +1436,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2014,6 +2023,12 @@ //#define AUTO_BED_LEVELING_UBL //TronxyX5S-2e enable with BLTOUCH //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2031,15 +2046,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2225,12 +2231,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration.h b/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration.h index 91e36a17a4..96a15fb38f 100644 --- a/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration.h +++ b/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration.h @@ -1444,6 +1444,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2022,6 +2031,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2039,15 +2054,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2233,12 +2239,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Tronxy/X5S/Configuration.h b/config/examples/Tronxy/X5S/Configuration.h index 3453026c7a..2f0934b7e7 100644 --- a/config/examples/Tronxy/X5S/Configuration.h +++ b/config/examples/Tronxy/X5S/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Tronxy/X5SA-2E/Configuration.h b/config/examples/Tronxy/X5SA-2E/Configuration.h index 12c6169cc8..1a1154509c 100644 --- a/config/examples/Tronxy/X5SA-2E/Configuration.h +++ b/config/examples/Tronxy/X5SA-2E/Configuration.h @@ -1437,6 +1437,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2015,6 +2024,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2032,15 +2047,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2226,12 +2232,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Tronxy/X5SA/Configuration.h b/config/examples/Tronxy/X5SA/Configuration.h index 532804c534..e9d7d05408 100644 --- a/config/examples/Tronxy/X5SA/Configuration.h +++ b/config/examples/Tronxy/X5SA/Configuration.h @@ -1437,6 +1437,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2015,6 +2024,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2032,15 +2047,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2226,12 +2232,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Tronxy/XY100/Configuration.h b/config/examples/Tronxy/XY100/Configuration.h index 5fbf723f3f..bd5628dbf1 100644 --- a/config/examples/Tronxy/XY100/Configuration.h +++ b/config/examples/Tronxy/XY100/Configuration.h @@ -1442,6 +1442,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2020,6 +2029,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2037,15 +2052,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2231,12 +2237,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Tronxy/XY2-Pro/Configuration.h b/config/examples/Tronxy/XY2-Pro/Configuration.h index e104f64202..eaee70eac7 100644 --- a/config/examples/Tronxy/XY2-Pro/Configuration.h +++ b/config/examples/Tronxy/XY2-Pro/Configuration.h @@ -1471,6 +1471,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2049,6 +2058,12 @@ #define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2066,15 +2081,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2260,12 +2266,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Two Trees/BlueR Plus/Configuration.h b/config/examples/Two Trees/BlueR Plus/Configuration.h index c52e7e7651..de7303bc0f 100644 --- a/config/examples/Two Trees/BlueR Plus/Configuration.h +++ b/config/examples/Two Trees/BlueR Plus/Configuration.h @@ -1437,6 +1437,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2015,6 +2024,12 @@ //#define AUTO_BED_LEVELING_UBL #define AUTO_BED_LEVELING_BILINEAR +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2032,15 +2047,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2226,12 +2232,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Two Trees/BlueR/BlueR V1/Configuration.h b/config/examples/Two Trees/BlueR/BlueR V1/Configuration.h index 78e1685c26..b57fd62565 100644 --- a/config/examples/Two Trees/BlueR/BlueR V1/Configuration.h +++ b/config/examples/Two Trees/BlueR/BlueR V1/Configuration.h @@ -1454,6 +1454,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2042,6 +2051,12 @@ #else #define MESH_BED_LEVELING #endif +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2059,15 +2074,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2253,12 +2259,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Two Trees/BlueR/BlueR V2/Configuration.h b/config/examples/Two Trees/BlueR/BlueR V2/Configuration.h index bae1036915..a3bf987c11 100644 --- a/config/examples/Two Trees/BlueR/BlueR V2/Configuration.h +++ b/config/examples/Two Trees/BlueR/BlueR V2/Configuration.h @@ -1455,6 +1455,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2043,6 +2052,12 @@ #else #define MESH_BED_LEVELING #endif +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2060,15 +2075,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2254,12 +2260,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Two Trees/BlueR/BlueR V3/Configuration.h b/config/examples/Two Trees/BlueR/BlueR V3/Configuration.h index 676d3fffac..57c28c7d7c 100644 --- a/config/examples/Two Trees/BlueR/BlueR V3/Configuration.h +++ b/config/examples/Two Trees/BlueR/BlueR V3/Configuration.h @@ -1466,6 +1466,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2054,6 +2063,12 @@ #else #define MESH_BED_LEVELING #endif +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2071,15 +2086,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2265,12 +2271,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration.h b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration.h index c214acd863..16e222d0d2 100644 --- a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration.h +++ b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration.h @@ -1457,6 +1457,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2047,6 +2056,12 @@ #endif //#define AUTO_BED_LEVELING_UBL +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X20 Y280" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2064,15 +2079,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2260,12 +2266,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X20 Y280" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration.h b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration.h index 4ae710d07a..a93cf58114 100644 --- a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration.h +++ b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration.h @@ -1457,6 +1457,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2047,6 +2056,12 @@ #endif //#define AUTO_BED_LEVELING_UBL +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X20 Y280" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2064,15 +2079,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2260,12 +2266,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X20 Y280" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Two Trees/Sapphire Pro/Configuration.h b/config/examples/Two Trees/Sapphire Pro/Configuration.h index 2532ad3fc5..03c9407c99 100644 --- a/config/examples/Two Trees/Sapphire Pro/Configuration.h +++ b/config/examples/Two Trees/Sapphire Pro/Configuration.h @@ -1452,6 +1452,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2041,6 +2050,12 @@ #define MESH_BED_LEVELING #endif +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2058,15 +2073,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2252,12 +2258,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/UltiMachine/Archim1/Configuration.h b/config/examples/UltiMachine/Archim1/Configuration.h index 1080408a93..cb2c11c229 100644 --- a/config/examples/UltiMachine/Archim1/Configuration.h +++ b/config/examples/UltiMachine/Archim1/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/UltiMachine/Archim2/Configuration.h b/config/examples/UltiMachine/Archim2/Configuration.h index cb1f951e22..8d68c4152e 100644 --- a/config/examples/UltiMachine/Archim2/Configuration.h +++ b/config/examples/UltiMachine/Archim2/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Ultimaker/Ultimaker 2+/Configuration.h b/config/examples/Ultimaker/Ultimaker 2+/Configuration.h index fae474ccd4..51c4a65907 100644 --- a/config/examples/Ultimaker/Ultimaker 2+/Configuration.h +++ b/config/examples/Ultimaker/Ultimaker 2+/Configuration.h @@ -1438,6 +1438,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2016,6 +2025,12 @@ //#define AUTO_BED_LEVELING_UBL #define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2033,15 +2048,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2227,12 +2233,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Ultimaker/Ultimaker 2/Configuration.h b/config/examples/Ultimaker/Ultimaker 2/Configuration.h index c43dab14b9..51b24f34fc 100644 --- a/config/examples/Ultimaker/Ultimaker 2/Configuration.h +++ b/config/examples/Ultimaker/Ultimaker 2/Configuration.h @@ -1450,6 +1450,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2030,6 +2039,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2047,15 +2062,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2241,12 +2247,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration.h b/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration.h index 61fae0f123..268b497e73 100644 --- a/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration.h +++ b/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration.h b/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration.h index d3106d3d58..8511268a65 100644 --- a/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration.h +++ b/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration.h @@ -1438,6 +1438,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2016,6 +2025,12 @@ //#define AUTO_BED_LEVELING_UBL #define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2033,15 +2048,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2227,12 +2233,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration.h b/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration.h index 711347f987..fa6f27182e 100644 --- a/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration.h +++ b/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration.h @@ -1439,6 +1439,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2019,6 +2028,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2036,15 +2051,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2230,12 +2236,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/VORONDesign/Configuration.h b/config/examples/VORONDesign/Configuration.h index dad6cf070d..cf222039fe 100644 --- a/config/examples/VORONDesign/Configuration.h +++ b/config/examples/VORONDesign/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ #define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Velleman/K8200 Upgraded/Configuration.h b/config/examples/Velleman/K8200 Upgraded/Configuration.h index da5d8231df..4defbc925e 100644 --- a/config/examples/Velleman/K8200 Upgraded/Configuration.h +++ b/config/examples/Velleman/K8200 Upgraded/Configuration.h @@ -1470,6 +1470,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2049,6 +2058,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2066,15 +2081,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2260,12 +2266,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Velleman/K8200/Configuration.h b/config/examples/Velleman/K8200/Configuration.h index 56ca961adc..86acac0b4f 100644 --- a/config/examples/Velleman/K8200/Configuration.h +++ b/config/examples/Velleman/K8200/Configuration.h @@ -1473,6 +1473,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2052,6 +2061,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2069,15 +2084,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2263,12 +2269,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Velleman/K8400/Dual-head/Configuration.h b/config/examples/Velleman/K8400/Dual-head/Configuration.h index 2b732594ab..9ee24960bb 100644 --- a/config/examples/Velleman/K8400/Dual-head/Configuration.h +++ b/config/examples/Velleman/K8400/Dual-head/Configuration.h @@ -1436,6 +1436,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2014,6 +2023,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2031,15 +2046,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2225,12 +2231,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Velleman/K8400/Single-head/Configuration.h b/config/examples/Velleman/K8400/Single-head/Configuration.h index b087013ca0..8a50c2e647 100644 --- a/config/examples/Velleman/K8400/Single-head/Configuration.h +++ b/config/examples/Velleman/K8400/Single-head/Configuration.h @@ -1436,6 +1436,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2014,6 +2023,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2031,15 +2046,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2225,12 +2231,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Voxelab/Aquila/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Voxelab/Aquila/BigTreeTech SKR Mini E3 2.0/Configuration.h index 6f342fae2b..3d56b1b14d 100644 --- a/config/examples/Voxelab/Aquila/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Voxelab/Aquila/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -1436,6 +1436,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2014,6 +2023,12 @@ //#define AUTO_BED_LEVELING_UBL #define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2031,15 +2046,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2225,12 +2231,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/WASP/PowerWASP/Configuration.h b/config/examples/WASP/PowerWASP/Configuration.h index ae9cf6cbe0..067f1de860 100644 --- a/config/examples/WASP/PowerWASP/Configuration.h +++ b/config/examples/WASP/PowerWASP/Configuration.h @@ -1449,6 +1449,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2027,6 +2036,12 @@ //#define AUTO_BED_LEVELING_UBL #define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2044,15 +2059,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2238,12 +2244,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Wanhao/Duplicator 4S/Configuration.h b/config/examples/Wanhao/Duplicator 4S/Configuration.h index 87d6275b7a..b9edb932cc 100644 --- a/config/examples/Wanhao/Duplicator 4S/Configuration.h +++ b/config/examples/Wanhao/Duplicator 4S/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Wanhao/Duplicator 6/Configuration.h b/config/examples/Wanhao/Duplicator 6/Configuration.h index 41f7ebf22a..cf63ddaa72 100644 --- a/config/examples/Wanhao/Duplicator 6/Configuration.h +++ b/config/examples/Wanhao/Duplicator 6/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h b/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h index 93da942b16..0218b30788 100644 --- a/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h +++ b/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h index e3de495526..e1aa8dfe81 100644 --- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h +++ b/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h @@ -1436,6 +1436,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2014,6 +2023,12 @@ //#define AUTO_BED_LEVELING_UBL #define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2031,15 +2046,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2225,12 +2231,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Wanhao/Duplicator i3 Plus/Configuration.h b/config/examples/Wanhao/Duplicator i3 Plus/Configuration.h index 912b3a1ad6..8fd8876a3a 100644 --- a/config/examples/Wanhao/Duplicator i3 Plus/Configuration.h +++ b/config/examples/Wanhao/Duplicator i3 Plus/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Weedo/Tina2/V2/Configuration.h b/config/examples/Weedo/Tina2/V2/Configuration.h index 008cf1cb49..412f513af3 100644 --- a/config/examples/Weedo/Tina2/V2/Configuration.h +++ b/config/examples/Weedo/Tina2/V2/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Weedo/Tina2/V3/Configuration.h b/config/examples/Weedo/Tina2/V3/Configuration.h index 895f4ea8fc..cd4b3450a4 100644 --- a/config/examples/Weedo/Tina2/V3/Configuration.h +++ b/config/examples/Weedo/Tina2/V3/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2013,6 +2022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2030,15 +2045,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2224,12 +2230,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Weistek/wt150/Configuration.h b/config/examples/Weistek/wt150/Configuration.h index f371ee453e..eefdeb1df5 100644 --- a/config/examples/Weistek/wt150/Configuration.h +++ b/config/examples/Weistek/wt150/Configuration.h @@ -1436,6 +1436,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2014,6 +2023,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2031,15 +2046,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2225,12 +2231,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Zonestar/P802M/Configuration.h b/config/examples/Zonestar/P802M/Configuration.h index a501c631a7..949ffed23f 100644 --- a/config/examples/Zonestar/P802M/Configuration.h +++ b/config/examples/Zonestar/P802M/Configuration.h @@ -1435,6 +1435,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2014,6 +2023,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2031,15 +2046,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2225,12 +2231,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h index 9f0b3e36de..eb0c7f2b9d 100644 --- a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h +++ b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h @@ -1440,6 +1440,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2018,6 +2027,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2035,15 +2050,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2229,12 +2235,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h index 6c8cc6c4fe..32d7f03810 100755 --- a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h +++ b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h @@ -1439,6 +1439,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2017,6 +2026,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2034,15 +2049,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2228,12 +2234,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h index 458919cd98..2e69987d91 100644 --- a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h +++ b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h @@ -1492,6 +1492,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2081,6 +2090,12 @@ //#define MESH_BED_LEVELING #endif +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2098,15 +2113,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2292,12 +2298,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/delta/Anycubic/Kossel/Configuration.h b/config/examples/delta/Anycubic/Kossel/Configuration.h index 977808c353..3384fc18dc 100644 --- a/config/examples/delta/Anycubic/Kossel/Configuration.h +++ b/config/examples/delta/Anycubic/Kossel/Configuration.h @@ -1497,6 +1497,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2086,6 +2095,12 @@ //#define MESH_BED_LEVELING #endif +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2103,15 +2118,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2297,12 +2303,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/delta/Anycubic/Predator/Configuration.h b/config/examples/delta/Anycubic/Predator/Configuration.h index 85e22dad4a..73d065a693 100644 --- a/config/examples/delta/Anycubic/Predator/Configuration.h +++ b/config/examples/delta/Anycubic/Predator/Configuration.h @@ -1443,6 +1443,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2021,6 +2030,12 @@ #define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +#define Z_PROBE_END_SCRIPT "G28\n" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2038,15 +2053,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2232,12 +2238,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -#define Z_PROBE_END_SCRIPT "G28\n" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/delta/Dreammaker/Overlord/Configuration.h b/config/examples/delta/Dreammaker/Overlord/Configuration.h index b20e95e9da..33689fe557 100644 --- a/config/examples/delta/Dreammaker/Overlord/Configuration.h +++ b/config/examples/delta/Dreammaker/Overlord/Configuration.h @@ -1442,6 +1442,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2020,6 +2029,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2037,15 +2052,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2231,12 +2237,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h index 74098afc4e..b542645668 100644 --- a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h +++ b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h @@ -1449,6 +1449,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2027,6 +2036,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2044,15 +2059,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2238,12 +2244,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h index c884dd8800..f798cf1ee8 100644 --- a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h +++ b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h @@ -1444,6 +1444,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2023,6 +2032,12 @@ #define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +#define Z_PROBE_END_SCRIPT "G28" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2040,15 +2055,6 @@ #define LEVELING_BED_TEMP 60 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2234,13 +2240,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" -#define Z_PROBE_END_SCRIPT "G28" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h b/config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h index 9cb5420916..8b5c8a3b22 100644 --- a/config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h +++ b/config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h @@ -1442,6 +1442,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2020,6 +2029,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +#define Z_PROBE_END_SCRIPT "G0 Z30 F12000\nG0 X0 Y0 Z30" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2037,15 +2052,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2231,13 +2237,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" -#define Z_PROBE_END_SCRIPT "G0 Z30 F12000\n G0 X0 Y0 Z30" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/delta/FLSUN/QQ-S/Configuration.h b/config/examples/delta/FLSUN/QQ-S/Configuration.h index 5f7c722d1c..ad21612efc 100644 --- a/config/examples/delta/FLSUN/QQ-S/Configuration.h +++ b/config/examples/delta/FLSUN/QQ-S/Configuration.h @@ -1443,6 +1443,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2021,6 +2030,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +#define Z_PROBE_END_SCRIPT "G0 Z30 F12000\n G0 X0 Y0 Z30" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2038,15 +2053,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2232,12 +2238,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -#define Z_PROBE_END_SCRIPT "G0 Z30 F12000\n G0 X0 Y0 Z30" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/delta/FLSUN/QQS-Pro/Configuration.h b/config/examples/delta/FLSUN/QQS-Pro/Configuration.h index 3466a36c52..d174048d60 100644 --- a/config/examples/delta/FLSUN/QQS-Pro/Configuration.h +++ b/config/examples/delta/FLSUN/QQS-Pro/Configuration.h @@ -1443,6 +1443,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2021,6 +2030,12 @@ #define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +#define Z_PROBE_END_SCRIPT "G28" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2038,15 +2053,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2232,12 +2238,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -#define Z_PROBE_END_SCRIPT "G28" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration.h index e62950f9ba..8a4d1091b3 100644 --- a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h +++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration.h @@ -1443,6 +1443,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2024,6 +2033,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2041,15 +2056,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2235,12 +2241,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/delta/FLSUN/kossel/Configuration.h b/config/examples/delta/FLSUN/kossel/Configuration.h index e901732d41..445cdab71d 100644 --- a/config/examples/delta/FLSUN/kossel/Configuration.h +++ b/config/examples/delta/FLSUN/kossel/Configuration.h @@ -1443,6 +1443,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2023,6 +2032,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2040,15 +2055,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2234,12 +2240,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration.h b/config/examples/delta/FLSUN/kossel_mini/Configuration.h index 5eb7aaf073..257d96e4fa 100644 --- a/config/examples/delta/FLSUN/kossel_mini/Configuration.h +++ b/config/examples/delta/FLSUN/kossel_mini/Configuration.h @@ -1443,6 +1443,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2023,6 +2032,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2040,15 +2055,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2234,12 +2240,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/delta/Geeetech/G2/Configuration.h b/config/examples/delta/Geeetech/G2/Configuration.h index c730564654..4ab0892944 100644 --- a/config/examples/delta/Geeetech/G2/Configuration.h +++ b/config/examples/delta/Geeetech/G2/Configuration.h @@ -1443,6 +1443,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2021,6 +2030,12 @@ #define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2038,15 +2053,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2232,12 +2238,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/delta/Geeetech/G2Pro/Configuration.h b/config/examples/delta/Geeetech/G2Pro/Configuration.h index 5cb8646e9c..b26a7b01df 100644 --- a/config/examples/delta/Geeetech/G2Pro/Configuration.h +++ b/config/examples/delta/Geeetech/G2Pro/Configuration.h @@ -1443,6 +1443,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2021,6 +2030,12 @@ #define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2038,15 +2053,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2232,12 +2238,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/delta/Geeetech/G2S/Configuration.h b/config/examples/delta/Geeetech/G2S/Configuration.h index df9fc07a3f..dab9ed5a9e 100644 --- a/config/examples/delta/Geeetech/G2S/Configuration.h +++ b/config/examples/delta/Geeetech/G2S/Configuration.h @@ -1443,6 +1443,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2021,6 +2030,12 @@ #define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2038,15 +2053,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2232,12 +2238,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/delta/Geeetech/G2SPro/Configuration.h b/config/examples/delta/Geeetech/G2SPro/Configuration.h index 1ec369375c..adf3e6a711 100644 --- a/config/examples/delta/Geeetech/G2SPro/Configuration.h +++ b/config/examples/delta/Geeetech/G2SPro/Configuration.h @@ -1443,6 +1443,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2021,6 +2030,12 @@ #define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2038,15 +2053,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2232,12 +2238,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration.h b/config/examples/delta/Geeetech/Rostock 301/Configuration.h index 37b03d2953..0c49e7a808 100644 --- a/config/examples/delta/Geeetech/Rostock 301/Configuration.h +++ b/config/examples/delta/Geeetech/Rostock 301/Configuration.h @@ -1443,6 +1443,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2021,6 +2030,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2038,15 +2053,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2232,12 +2238,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/delta/Hatchbox_Alpha/Configuration.h b/config/examples/delta/Hatchbox_Alpha/Configuration.h index eca2ae99a6..02529c8f46 100644 --- a/config/examples/delta/Hatchbox_Alpha/Configuration.h +++ b/config/examples/delta/Hatchbox_Alpha/Configuration.h @@ -1448,6 +1448,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2026,6 +2035,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2043,15 +2058,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2237,12 +2243,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/delta/MKS/SBASE/Configuration.h b/config/examples/delta/MKS/SBASE/Configuration.h index ea5a071fc4..1a154bb3d4 100644 --- a/config/examples/delta/MKS/SBASE/Configuration.h +++ b/config/examples/delta/MKS/SBASE/Configuration.h @@ -1443,6 +1443,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2021,6 +2030,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2038,15 +2053,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2232,12 +2238,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/delta/Malyan M300/Configuration.h b/config/examples/delta/Malyan M300/Configuration.h index b1074cd18a..83f1cb3d5c 100644 --- a/config/examples/delta/Malyan M300/Configuration.h +++ b/config/examples/delta/Malyan M300/Configuration.h @@ -1436,6 +1436,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2014,6 +2023,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2031,15 +2046,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2225,12 +2231,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/delta/Tevo Little Monster/Configuration.h b/config/examples/delta/Tevo Little Monster/Configuration.h index e92d3f43bb..e117b1994b 100644 --- a/config/examples/delta/Tevo Little Monster/Configuration.h +++ b/config/examples/delta/Tevo Little Monster/Configuration.h @@ -1444,6 +1444,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2022,6 +2031,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2039,15 +2054,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2233,12 +2239,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/delta/Velleman/K8800/Configuration.h b/config/examples/delta/Velleman/K8800/Configuration.h index bd6a1c9a73..9898fd20f4 100644 --- a/config/examples/delta/Velleman/K8800/Configuration.h +++ b/config/examples/delta/Velleman/K8800/Configuration.h @@ -1470,6 +1470,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2053,6 +2062,12 @@ #endif //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2070,15 +2085,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2264,12 +2270,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/delta/generic/Configuration.h b/config/examples/delta/generic/Configuration.h index 847dd79d35..0440c729c5 100644 --- a/config/examples/delta/generic/Configuration.h +++ b/config/examples/delta/generic/Configuration.h @@ -1443,6 +1443,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2021,6 +2030,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2038,15 +2053,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2232,12 +2238,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/delta/kossel_clear/Configuration.h b/config/examples/delta/kossel_clear/Configuration.h index cbf761468d..fbc17a0c73 100644 --- a/config/examples/delta/kossel_clear/Configuration.h +++ b/config/examples/delta/kossel_clear/Configuration.h @@ -1443,6 +1443,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2022,6 +2031,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2039,15 +2054,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2233,12 +2239,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/delta/kossel_mini/Configuration.h b/config/examples/delta/kossel_mini/Configuration.h index 92e4c94e23..8d4ba4f02c 100644 --- a/config/examples/delta/kossel_mini/Configuration.h +++ b/config/examples/delta/kossel_mini/Configuration.h @@ -1443,6 +1443,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2023,6 +2032,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2040,15 +2055,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2234,12 +2240,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/delta/kossel_pro/Configuration.h b/config/examples/delta/kossel_pro/Configuration.h index 35dce71775..bd33d6054b 100644 --- a/config/examples/delta/kossel_pro/Configuration.h +++ b/config/examples/delta/kossel_pro/Configuration.h @@ -1455,6 +1455,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2042,6 +2051,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2059,15 +2074,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2253,12 +2259,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/delta/kossel_xl/Configuration.h b/config/examples/delta/kossel_xl/Configuration.h index 546637d3f9..5b0c76b3c1 100644 --- a/config/examples/delta/kossel_xl/Configuration.h +++ b/config/examples/delta/kossel_xl/Configuration.h @@ -1449,6 +1449,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2027,6 +2036,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2044,15 +2059,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2238,12 +2244,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/gCreate/gMax1.5+/Configuration.h b/config/examples/gCreate/gMax1.5+/Configuration.h index 2eebb91e56..e3531415a1 100644 --- a/config/examples/gCreate/gMax1.5+/Configuration.h +++ b/config/examples/gCreate/gMax1.5+/Configuration.h @@ -1442,6 +1442,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2021,6 +2030,12 @@ #define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2038,15 +2053,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2232,12 +2238,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration.h b/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration.h index f883370aa8..0ed6f43582 100644 --- a/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration.h +++ b/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration.h @@ -1447,6 +1447,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2025,6 +2034,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2042,15 +2057,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2236,12 +2242,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration.h b/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration.h index 8816ef0e31..c28b54b074 100644 --- a/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration.h +++ b/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration.h @@ -1422,6 +1422,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2000,6 +2009,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2017,15 +2032,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2211,12 +2217,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/makibox/Configuration.h b/config/examples/makibox/Configuration.h index ef0cac1332..65f9ac7c58 100644 --- a/config/examples/makibox/Configuration.h +++ b/config/examples/makibox/Configuration.h @@ -1438,6 +1438,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2016,6 +2025,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2033,15 +2048,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2227,12 +2233,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0) diff --git a/config/examples/tvrrug/Round2/Configuration.h b/config/examples/tvrrug/Round2/Configuration.h index 401a59ad71..75f61f5ad0 100644 --- a/config/examples/tvrrug/Round2/Configuration.h +++ b/config/examples/tvrrug/Round2/Configuration.h @@ -1442,6 +1442,15 @@ //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) #endif +/** + * Bed Distance Sensor + * + * Measures the distance from bed to nozzle with accuracy of 0.01mm. + * For information about this sensor https://github.com/markniu/Bed_Distance_sensor + * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. + */ +//#define BD_SENSOR + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -2020,6 +2029,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable @@ -2037,15 +2052,6 @@ #define LEVELING_BED_TEMP 50 #endif -/** - * Bed Distance Sensor - * - * Measures the distance from bed to nozzle with accuracy of 0.01mm. - * For information about this sensor https://github.com/markniu/Bed_Distance_sensor - * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. - */ -//#define BD_SENSOR - /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. @@ -2231,12 +2237,6 @@ #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - // @section homing // The center of the bed is at (X=0, Y=0)