✨ PROBE_WAKEUP_TIME_MS

MarlinFirmware/Marlin#28096

config/default/Configuration.h

@@ -1681,6 +1681,8 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
+
 // Most probes should stay away from the edges of the bed, but
 // with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10

config/examples/3DFabXYZ/Migbot/Configuration.h

@@ -1683,8 +1683,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/3DMatik/XL/Configuration.h

@@ -1681,8 +1681,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/ADIMLab/Gantry v1/Configuration.h

@@ -1681,8 +1681,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/ADIMLab/Gantry v2/Configuration.h

@@ -1681,8 +1681,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/Alfawise/U20-bltouch/Configuration.h

@@ -1750,8 +1750,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/Alfawise/U20/Configuration.h

@@ -1751,8 +1751,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/AliExpress/CL-260/Configuration.h

@@ -1681,8 +1681,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/AliExpress/UM2pExt/Configuration.h

@@ -1682,8 +1682,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/Anet/A2/Configuration.h

@@ -1681,8 +1681,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 //#define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/Anet/A2plus/Configuration.h

@@ -1681,8 +1681,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 //#define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/Anet/A6/Configuration.h

@@ -1711,8 +1711,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/Anet/A8/Configuration.h

@@ -1684,8 +1684,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/Anet/A8plus/Configuration.h

@@ -1683,8 +1683,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/Anet/A9/Configuration.h

@@ -1681,8 +1681,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/Anet/E10/Configuration.h

@@ -1681,8 +1681,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/Anet/E16/BTT SKR 1.3/Configuration.h

@@ -1683,8 +1683,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/Anet/E16/Stock/Configuration.h

@@ -1683,8 +1683,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/Anet/ET4+/Configuration.h

@@ -1687,8 +1687,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 25
 
 // X and Y axis travel speed between probes.

config/examples/Anet/ET4-Pro/Configuration.h

@@ -1687,8 +1687,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 25
 
 // X and Y axis travel speed between probes.

config/examples/Anet/ET4/Configuration.h

@@ -1687,8 +1687,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 25
 
 // X and Y axis travel speed between probes.

config/examples/Anet/ET4X/Configuration.h

@@ -1687,8 +1687,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 25
 
 // X and Y axis travel speed between probes.

config/examples/Anet/ET5-Pro/Configuration.h

@@ -1681,8 +1681,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/Anet/ET5/Configuration.h

@@ -1681,8 +1681,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/Anet/ET5X/Configuration.h

@@ -1681,8 +1681,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/AnyCubic/Chiron/Configuration.h

@@ -1685,8 +1685,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h

@@ -1682,8 +1682,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h

@@ -1682,8 +1682,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h

@@ -1681,8 +1681,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/AnyCubic/Vyper/Configuration.h

@@ -1681,8 +1681,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration.h

@@ -1730,8 +1730,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration.h

@@ -1692,8 +1692,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/AnyCubic/i3/Configuration.h

@@ -1681,8 +1681,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/ArmEd/Configuration.h

@@ -1682,8 +1682,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/Artillery/Genius Pro/Configuration.h

@@ -1681,8 +1681,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/Artillery/Genius/BLTouch/Configuration.h

@@ -1681,8 +1681,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/Artillery/Genius/V1/Configuration.h

@@ -1681,8 +1681,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/Artillery/Hornet/Configuration.h

@@ -1681,8 +1681,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration.h

@@ -1697,8 +1697,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/Artillery/Sidewinder X1/V1/Configuration.h

@@ -1681,8 +1681,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/Artillery/Sidewinder X2/Configuration.h

@@ -1681,8 +1681,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/Azteeg/X5GT/Configuration.h

@@ -1681,8 +1681,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/BIBO/TouchX/cyclops/Configuration.h

@@ -1681,8 +1681,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/BIBO/TouchX/default - BLTouch/Configuration.h

@@ -1682,8 +1682,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 13
 
 // X and Y axis travel speed between probes.

config/examples/BIBO/TouchX/default/Configuration.h

@@ -1681,8 +1681,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/BIQU/B1 SE Plus/Configuration.h

@@ -1679,8 +1679,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/BIQU/B1 SE/Configuration.h

@@ -1679,8 +1679,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/BIQU/B1/Configuration.h

@@ -1690,8 +1690,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/BIQU/BX/all-metal-hotend/Configuration.h

@@ -1703,8 +1703,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 15
 
 // X and Y axis travel speed between probes.

config/examples/BIQU/BX/base/Configuration.h

@@ -1703,8 +1703,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 15
 
 // X and Y axis travel speed between probes.

config/examples/BIQU/Hurakan/Configuration.h

@@ -1684,8 +1684,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 5
 
 // X and Y axis travel speed between probes.

config/examples/BIQU/Thunder Standard/Configuration.h

@@ -1681,8 +1681,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/BQ/Hephestos/Configuration.h

@@ -1682,8 +1682,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/BQ/Hephestos_2/Configuration.h

@@ -1695,8 +1695,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/BQ/WITBOX/Configuration.h

@@ -1682,8 +1682,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/CNC/miniRambo/Configuration.h

@@ -1682,8 +1682,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/CTC/A13/Configuration.h

@@ -1682,8 +1682,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/CTC/Bizer/Configuration.h

@@ -1681,8 +1681,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h

@@ -1682,8 +1682,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/Cartesio/Configuration.h

@@ -1697,8 +1697,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/Copymaster3D/300/Configuration.h

@@ -1682,8 +1682,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/Copymaster3D/400/Configuration.h

@@ -1681,8 +1681,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/Copymaster3D/500/Configuration.h

@@ -1682,8 +1682,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/Creality/CR-10 Max/Configuration.h

@@ -1681,8 +1681,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 3
 
 // X and Y axis travel speed between probes.

config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration.h

@@ -1689,8 +1689,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 3.0/Configuration.h

@@ -1689,8 +1689,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h

@@ -1690,8 +1690,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h

@@ -1681,8 +1681,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h

@@ -1682,8 +1682,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration.h

@@ -1682,8 +1682,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration.h

@@ -1681,8 +1681,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 45
 
 // X and Y axis travel speed between probes.

config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h

@@ -1682,8 +1682,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/Creality/CR-10 S5/CrealityV2.2 - BLTouch/Configuration.h

@@ -1683,8 +1683,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 25
 
 // X and Y axis travel speed between probes.

config/examples/Creality/CR-10 S5/CrealityV427 - BLTouch/Configuration.h

@@ -1683,8 +1683,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/Creality/CR-10 V2/Configuration.h

@@ -1699,8 +1699,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/Creality/CR-10 V3/BigTreeTech SKR Mini E3 v3/Configuration.h

@@ -1700,8 +1700,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 #define PROBING_MARGIN_LEFT 45
 

config/examples/Creality/CR-10 V3/Stock/Configuration.h

@@ -1700,8 +1700,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 #define PROBING_MARGIN_LEFT 45
 

config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h

@@ -1680,8 +1680,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 3.0/Configuration.h

@@ -1680,8 +1680,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/Creality/CR-10/CrealityV1/Configuration.h

@@ -1681,8 +1681,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/Creality/CR-10S Pro/Configuration.h

@@ -1681,8 +1681,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h

@@ -1681,8 +1681,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration.h

@@ -1681,8 +1681,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h

@@ -1682,8 +1682,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 3.0/Configuration.h

@@ -1682,8 +1682,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration.h

@@ -1681,8 +1681,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/Creality/CR-10S/CrealityV1 - BLTouch/Configuration.h

@@ -1681,8 +1681,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/Creality/CR-10S/CrealityV1/Configuration.h

@@ -1681,8 +1681,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/Creality/CR-20 Pro/Configuration.h

@@ -1682,8 +1682,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration.h

@@ -1682,8 +1682,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/Creality/CR-20/Stock/Configuration.h

@@ -1682,8 +1682,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/Creality/CR-30 PrintMill/Configuration.h

@@ -1681,8 +1681,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/Creality/CR-6 SE/Configuration.h

@@ -1681,8 +1681,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 30
 
 // X and Y axis travel speed between probes.

config/examples/Creality/CR-8/Configuration.h

@@ -1681,8 +1681,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/Creality/Ender-2 Pro/CrealityV24S4/Configuration.h

@@ -1681,8 +1681,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration.h

@@ -1681,8 +1681,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/Creality/Ender-2/Configuration.h

@@ -1682,8 +1682,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/Creality/Ender-3 Max Neo/Configuration.h

@@ -1682,8 +1682,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/Creality/Ender-3 Max/Configuration.h

@@ -1685,8 +1685,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/Creality/Ender-3 Neo/Configuration.h

@@ -1682,8 +1682,9 @@
   //#define PROBE_TOOLCHANGE_NO_MOVE  // Suppress motion on probe tool-change
 #endif
 
-// Most probes should stay away from the edges of the bed, but
+//#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
-// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+
+// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.