diff --git a/config/default/Configuration_adv.h b/config/default/Configuration_adv.h index 31661a582e..a124c0c173 100644 --- a/config/default/Configuration_adv.h +++ b/config/default/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h index f6865ee35e..c81147a3d3 100644 --- a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h +++ b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h @@ -3540,30 +3540,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h index 89320b7a38..82f136e851 100644 --- a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h +++ b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h index 8f856193ae..db4885c467 100644 --- a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h +++ b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/AlephObjects/TAZ4/Configuration_adv.h b/config/examples/AlephObjects/TAZ4/Configuration_adv.h index 7c878b8678..bab6b05e81 100644 --- a/config/examples/AlephObjects/TAZ4/Configuration_adv.h +++ b/config/examples/AlephObjects/TAZ4/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h index ea325a7279..d52e6958f4 100644 --- a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h +++ b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h @@ -3531,30 +3531,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Alfawise/U20/Configuration_adv.h b/config/examples/Alfawise/U20/Configuration_adv.h index 0ae31794a8..76ff10f004 100644 --- a/config/examples/Alfawise/U20/Configuration_adv.h +++ b/config/examples/Alfawise/U20/Configuration_adv.h @@ -3530,30 +3530,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/AliExpress/UM2pExt/Configuration_adv.h b/config/examples/AliExpress/UM2pExt/Configuration_adv.h index 615f3e1ba2..c7c2c829c8 100644 --- a/config/examples/AliExpress/UM2pExt/Configuration_adv.h +++ b/config/examples/AliExpress/UM2pExt/Configuration_adv.h @@ -3531,30 +3531,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Anet/A2/Configuration_adv.h b/config/examples/Anet/A2/Configuration_adv.h index c509771c6a..493e149293 100644 --- a/config/examples/Anet/A2/Configuration_adv.h +++ b/config/examples/Anet/A2/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Anet/A2plus/Configuration_adv.h b/config/examples/Anet/A2plus/Configuration_adv.h index c509771c6a..493e149293 100644 --- a/config/examples/Anet/A2plus/Configuration_adv.h +++ b/config/examples/Anet/A2plus/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Anet/A6/Configuration_adv.h b/config/examples/Anet/A6/Configuration_adv.h index 01e68142f9..21dc1d058d 100644 --- a/config/examples/Anet/A6/Configuration_adv.h +++ b/config/examples/Anet/A6/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Anet/A8/Configuration_adv.h b/config/examples/Anet/A8/Configuration_adv.h index f9ecfb6976..c79794f0c6 100644 --- a/config/examples/Anet/A8/Configuration_adv.h +++ b/config/examples/Anet/A8/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Anet/A8plus/Configuration_adv.h b/config/examples/Anet/A8plus/Configuration_adv.h index f47b12c397..f24e7111c1 100644 --- a/config/examples/Anet/A8plus/Configuration_adv.h +++ b/config/examples/Anet/A8plus/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Anet/A9/Configuration_adv.h b/config/examples/Anet/A9/Configuration_adv.h index 54e4e76bc4..c2588a0aa2 100644 --- a/config/examples/Anet/A9/Configuration_adv.h +++ b/config/examples/Anet/A9/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Anet/E10/Configuration_adv.h b/config/examples/Anet/E10/Configuration_adv.h index 500ef45613..18dd8ff763 100644 --- a/config/examples/Anet/E10/Configuration_adv.h +++ b/config/examples/Anet/E10/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Anet/E16/Configuration_adv.h b/config/examples/Anet/E16/Configuration_adv.h index 0c211f2e94..c81a281d7d 100644 --- a/config/examples/Anet/E16/Configuration_adv.h +++ b/config/examples/Anet/E16/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Anet/ET4/Configuration_adv.h b/config/examples/Anet/ET4/Configuration_adv.h index 629aeb1562..37531d7117 100644 --- a/config/examples/Anet/ET4/Configuration_adv.h +++ b/config/examples/Anet/ET4/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/AnyCubic/Chiron/Configuration_adv.h b/config/examples/AnyCubic/Chiron/Configuration_adv.h index 58451364ca..3edb52cdd9 100644 --- a/config/examples/AnyCubic/Chiron/Configuration_adv.h +++ b/config/examples/AnyCubic/Chiron/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h index 0c598fdb73..f810b4ef9c 100644 --- a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h +++ b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h index 3440da04e2..d64db74dcf 100644 --- a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h +++ b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/AnyCubic/i3 Mega/Configuration_adv.h b/config/examples/AnyCubic/i3 Mega/Configuration_adv.h index 9e36954388..c6bc88af16 100644 --- a/config/examples/AnyCubic/i3 Mega/Configuration_adv.h +++ b/config/examples/AnyCubic/i3 Mega/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/AnyCubic/i3/Configuration_adv.h b/config/examples/AnyCubic/i3/Configuration_adv.h index 371819977b..6f3b9a110e 100644 --- a/config/examples/AnyCubic/i3/Configuration_adv.h +++ b/config/examples/AnyCubic/i3/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/ArmEd/Configuration_adv.h b/config/examples/ArmEd/Configuration_adv.h index 0a4ca43d1d..bf4db756aa 100644 --- a/config/examples/ArmEd/Configuration_adv.h +++ b/config/examples/ArmEd/Configuration_adv.h @@ -3533,30 +3533,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Artillery/Genius/Configuration_adv.h b/config/examples/Artillery/Genius/Configuration_adv.h index 9a81febd03..3abc8dbbb9 100644 --- a/config/examples/Artillery/Genius/Configuration_adv.h +++ b/config/examples/Artillery/Genius/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Artillery/Sidewinder X1/Configuration_adv.h b/config/examples/Artillery/Sidewinder X1/Configuration_adv.h index 9a81febd03..3abc8dbbb9 100644 --- a/config/examples/Artillery/Sidewinder X1/Configuration_adv.h +++ b/config/examples/Artillery/Sidewinder X1/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration_adv.h b/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration_adv.h index 81b8c17a7d..b4e1a0b1a1 100644 --- a/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration_adv.h +++ b/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h index abf2d31ee5..92d7fdcc49 100644 --- a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/BIBO/TouchX/default/Configuration_adv.h b/config/examples/BIBO/TouchX/default/Configuration_adv.h index 90334e94bb..2f53700510 100644 --- a/config/examples/BIBO/TouchX/default/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/default/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/BIQU/B1-BLTouch/Configuration_adv.h b/config/examples/BIQU/B1-BLTouch/Configuration_adv.h index 33e8dd12bb..a9bc787a68 100644 --- a/config/examples/BIQU/B1-BLTouch/Configuration_adv.h +++ b/config/examples/BIQU/B1-BLTouch/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/BIQU/B1/Configuration_adv.h b/config/examples/BIQU/B1/Configuration_adv.h index f7275217a7..6203592ab7 100644 --- a/config/examples/BIQU/B1/Configuration_adv.h +++ b/config/examples/BIQU/B1/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/BQ/Hephestos/Configuration_adv.h b/config/examples/BQ/Hephestos/Configuration_adv.h index 70efd57cfe..d74b00b40a 100644 --- a/config/examples/BQ/Hephestos/Configuration_adv.h +++ b/config/examples/BQ/Hephestos/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/BQ/Hephestos_2/Configuration_adv.h b/config/examples/BQ/Hephestos_2/Configuration_adv.h index b70b6d2bfe..bfb37dbe3b 100644 --- a/config/examples/BQ/Hephestos_2/Configuration_adv.h +++ b/config/examples/BQ/Hephestos_2/Configuration_adv.h @@ -3537,30 +3537,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/BQ/WITBOX/Configuration_adv.h b/config/examples/BQ/WITBOX/Configuration_adv.h index 70efd57cfe..d74b00b40a 100644 --- a/config/examples/BQ/WITBOX/Configuration_adv.h +++ b/config/examples/BQ/WITBOX/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Cartesio/Configuration_adv.h b/config/examples/Cartesio/Configuration_adv.h index 1bac53a2d4..b5b3a1b4d9 100644 --- a/config/examples/Cartesio/Configuration_adv.h +++ b/config/examples/Cartesio/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h index f62e050cb3..de67e6494f 100644 --- a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h index 9ffe368471..eb74bdced6 100644 --- a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h index 69b6d5dfbd..f9a0573b10 100644 --- a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h index 69b6d5dfbd..f9a0573b10 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Creality/CR-10 V2/Configuration_adv.h b/config/examples/Creality/CR-10 V2/Configuration_adv.h index 3ea56d4895..37d4d43917 100644 --- a/config/examples/Creality/CR-10 V2/Configuration_adv.h +++ b/config/examples/Creality/CR-10 V2/Configuration_adv.h @@ -3535,30 +3535,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 9783875f1c..ce15a78a0d 100644 --- a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h index 48ac1355e2..36da47297c 100644 --- a/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h @@ -3532,30 +3532,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 4b06302562..30e532d1ab 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h index 6fd11d4492..9ed5d024b6 100644 --- a/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Creality/CR-20 Pro/Configuration_adv.h b/config/examples/Creality/CR-20 Pro/Configuration_adv.h index c937dfa5b7..7e9242f7d4 100644 --- a/config/examples/Creality/CR-20 Pro/Configuration_adv.h +++ b/config/examples/Creality/CR-20 Pro/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Creality/CR-20/Configuration_adv.h b/config/examples/Creality/CR-20/Configuration_adv.h index 99b885e93a..63b6550f86 100644 --- a/config/examples/Creality/CR-20/Configuration_adv.h +++ b/config/examples/Creality/CR-20/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Creality/CR-6 SE/Configuration_adv.h b/config/examples/Creality/CR-6 SE/Configuration_adv.h index 31661a582e..a124c0c173 100644 --- a/config/examples/Creality/CR-6 SE/Configuration_adv.h +++ b/config/examples/Creality/CR-6 SE/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Creality/CR-8/Configuration_adv.h b/config/examples/Creality/CR-8/Configuration_adv.h index b9e2913448..aaae777968 100644 --- a/config/examples/Creality/CR-8/Configuration_adv.h +++ b/config/examples/Creality/CR-8/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Creality/Ender-2/Configuration_adv.h b/config/examples/Creality/Ender-2/Configuration_adv.h index f3e9cb5a9d..42c5471d86 100644 --- a/config/examples/Creality/Ender-2/Configuration_adv.h +++ b/config/examples/Creality/Ender-2/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h index 51412cac57..3d7a0c40d6 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index 27f41899d2..c68f9f7eff 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 39862fd874..bb50339c75 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h index 11704f32fd..ea020a9803 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h index edcae1f38d..5ce9182df9 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h @@ -3530,30 +3530,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h index 15636edac5..25d5a26d39 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Creality/Ender-3 V2/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/Configuration_adv.h index 5794a03838..b65d996ec3 100644 --- a/config/examples/Creality/Ender-3 V2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/Configuration_adv.h @@ -3530,30 +3530,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h index 74db64f6e7..0b3c3182ff 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h index bdbb88e2aa..8e90dc708d 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h index 74db64f6e7..0b3c3182ff 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h index d46ca6aa25..cf47395e93 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h index 729f620a84..8132428caa 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index 5f69b04e85..7ec9c76e08 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 407415f97b..e48a9b3221 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h index 262e0db97e..ddb57f5677 100644 --- a/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h index a5b3f50ef5..919c8e99fc 100644 --- a/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h index b973796023..f1f304a40b 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h index b973796023..f1f304a40b 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h index b973796023..f1f304a40b 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h index b973796023..f1f304a40b 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h index 1db6b8f5df..56120d34e6 100644 --- a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Creality/Ender-3/MKS Robin E3 1.0/Configuration_adv.h b/config/examples/Creality/Ender-3/MKS Robin E3 1.0/Configuration_adv.h index 680b4e3d0b..a543ab1ad2 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3 1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3 1.0/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Creality/Ender-4/Configuration_adv.h b/config/examples/Creality/Ender-4/Configuration_adv.h index dd140cf792..5b05d6c37b 100644 --- a/config/examples/Creality/Ender-4/Configuration_adv.h +++ b/config/examples/Creality/Ender-4/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Creality/Ender-5 Plus/Configuration_adv.h b/config/examples/Creality/Ender-5 Plus/Configuration_adv.h index fb5611760f..d9ca2a40dc 100644 --- a/config/examples/Creality/Ender-5 Plus/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Plus/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h index ae3072769c..77f271d7cf 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h index 21bf081945..b671b0aabb 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h index ae3072769c..77f271d7cf 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h index b833d02561..de6d5f3f7d 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h @@ -3533,30 +3533,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 003fde02b3..c9b45563d7 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h index fa8fb6b43d..9ad6f03209 100644 --- a/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h index fa8fb6b43d..9ad6f03209 100644 --- a/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h index ec86027bdb..7a6ccdcf7a 100644 --- a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h +++ b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Daycom/3DP-100/Configuration_adv.h b/config/examples/Daycom/3DP-100/Configuration_adv.h index 80a1c1e3ac..2aa02666f1 100644 --- a/config/examples/Daycom/3DP-100/Configuration_adv.h +++ b/config/examples/Daycom/3DP-100/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h b/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h index 37f6391176..dd599dae75 100644 --- a/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h +++ b/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Einstart-S/Configuration_adv.h b/config/examples/Einstart-S/Configuration_adv.h index 6547fd3531..88a78b16d6 100644 --- a/config/examples/Einstart-S/Configuration_adv.h +++ b/config/examples/Einstart-S/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/FYSETC/AIO_II/Configuration_adv.h b/config/examples/FYSETC/AIO_II/Configuration_adv.h index 45e95856c1..d8566e72c5 100644 --- a/config/examples/FYSETC/AIO_II/Configuration_adv.h +++ b/config/examples/FYSETC/AIO_II/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/FYSETC/F6_13/Configuration_adv.h b/config/examples/FYSETC/F6_13/Configuration_adv.h index a3efed0b0e..d24a5aa3c9 100644 --- a/config/examples/FYSETC/F6_13/Configuration_adv.h +++ b/config/examples/FYSETC/F6_13/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/FYSETC/S6/Configuration_adv.h b/config/examples/FYSETC/S6/Configuration_adv.h index f637a3b525..21d210e5f0 100644 --- a/config/examples/FYSETC/S6/Configuration_adv.h +++ b/config/examples/FYSETC/S6/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Felix/DUAL/Configuration_adv.h b/config/examples/Felix/DUAL/Configuration_adv.h index 27a8d903b7..3e05f3e453 100644 --- a/config/examples/Felix/DUAL/Configuration_adv.h +++ b/config/examples/Felix/DUAL/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Felix/Single/Configuration_adv.h b/config/examples/Felix/Single/Configuration_adv.h index 27a8d903b7..3e05f3e453 100644 --- a/config/examples/Felix/Single/Configuration_adv.h +++ b/config/examples/Felix/Single/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/FlashForge/Creator 2X/Configuration_adv.h b/config/examples/FlashForge/Creator 2X/Configuration_adv.h index 6dafcad17c..128b07d9e9 100644 --- a/config/examples/FlashForge/Creator 2X/Configuration_adv.h +++ b/config/examples/FlashForge/Creator 2X/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/FlashForge/CreatorPro/Configuration_adv.h b/config/examples/FlashForge/CreatorPro/Configuration_adv.h index 393ca7540d..f8f805079a 100644 --- a/config/examples/FlashForge/CreatorPro/Configuration_adv.h +++ b/config/examples/FlashForge/CreatorPro/Configuration_adv.h @@ -3528,30 +3528,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/FlyingBear/P905H/Configuration_adv.h b/config/examples/FlyingBear/P905H/Configuration_adv.h index 5b34e828c3..2e3eb4db11 100644 --- a/config/examples/FlyingBear/P905H/Configuration_adv.h +++ b/config/examples/FlyingBear/P905H/Configuration_adv.h @@ -3532,30 +3532,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/config/examples/FolgerTech/i3-2020/Configuration_adv.h index 44a9a8765a..e2b2ed0fd3 100644 --- a/config/examples/FolgerTech/i3-2020/Configuration_adv.h +++ b/config/examples/FolgerTech/i3-2020/Configuration_adv.h @@ -3537,30 +3537,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Formbot/Raptor/Configuration_adv.h b/config/examples/Formbot/Raptor/Configuration_adv.h index 1d02b910ba..a74cb2ace2 100644 --- a/config/examples/Formbot/Raptor/Configuration_adv.h +++ b/config/examples/Formbot/Raptor/Configuration_adv.h @@ -3533,30 +3533,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h index 60011de0bb..f53d08e642 100644 --- a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h +++ b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h @@ -3530,30 +3530,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Formbot/T_Rex_3/Configuration_adv.h b/config/examples/Formbot/T_Rex_3/Configuration_adv.h index 105e6138f9..58e4ea8e65 100644 --- a/config/examples/Formbot/T_Rex_3/Configuration_adv.h +++ b/config/examples/Formbot/T_Rex_3/Configuration_adv.h @@ -3539,30 +3539,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Geeetech/A10/Configuration_adv.h b/config/examples/Geeetech/A10/Configuration_adv.h index f03ef410c1..67b13a42d4 100644 --- a/config/examples/Geeetech/A10/Configuration_adv.h +++ b/config/examples/Geeetech/A10/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Geeetech/A10D/Configuration_adv.h b/config/examples/Geeetech/A10D/Configuration_adv.h index 12fdeccd9b..29507c2bcb 100644 --- a/config/examples/Geeetech/A10D/Configuration_adv.h +++ b/config/examples/Geeetech/A10D/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Geeetech/A10M/Configuration_adv.h b/config/examples/Geeetech/A10M/Configuration_adv.h index 70f4894454..7f5c838919 100644 --- a/config/examples/Geeetech/A10M/Configuration_adv.h +++ b/config/examples/Geeetech/A10M/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Geeetech/A10T/Configuration_adv.h b/config/examples/Geeetech/A10T/Configuration_adv.h index 70f4894454..7f5c838919 100644 --- a/config/examples/Geeetech/A10T/Configuration_adv.h +++ b/config/examples/Geeetech/A10T/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Geeetech/A20/Configuration_adv.h b/config/examples/Geeetech/A20/Configuration_adv.h index 39efadabf1..e37e5b0693 100644 --- a/config/examples/Geeetech/A20/Configuration_adv.h +++ b/config/examples/Geeetech/A20/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Geeetech/A20M/Configuration_adv.h b/config/examples/Geeetech/A20M/Configuration_adv.h index 39efadabf1..e37e5b0693 100644 --- a/config/examples/Geeetech/A20M/Configuration_adv.h +++ b/config/examples/Geeetech/A20M/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Geeetech/A20T/Configuration_adv.h b/config/examples/Geeetech/A20T/Configuration_adv.h index 39efadabf1..e37e5b0693 100644 --- a/config/examples/Geeetech/A20T/Configuration_adv.h +++ b/config/examples/Geeetech/A20T/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Geeetech/A30/Configuration_adv.h b/config/examples/Geeetech/A30/Configuration_adv.h index 806d3af094..adda2fcd6c 100644 --- a/config/examples/Geeetech/A30/Configuration_adv.h +++ b/config/examples/Geeetech/A30/Configuration_adv.h @@ -3528,30 +3528,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Geeetech/D200/Configuration_adv.h b/config/examples/Geeetech/D200/Configuration_adv.h index ba941eee5f..8402a21148 100644 --- a/config/examples/Geeetech/D200/Configuration_adv.h +++ b/config/examples/Geeetech/D200/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Geeetech/Duplicator5/Configuration_adv.h b/config/examples/Geeetech/Duplicator5/Configuration_adv.h index f637a3b525..21d210e5f0 100644 --- a/config/examples/Geeetech/Duplicator5/Configuration_adv.h +++ b/config/examples/Geeetech/Duplicator5/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Geeetech/E180/Configuration_adv.h b/config/examples/Geeetech/E180/Configuration_adv.h index 806d3af094..adda2fcd6c 100644 --- a/config/examples/Geeetech/E180/Configuration_adv.h +++ b/config/examples/Geeetech/E180/Configuration_adv.h @@ -3528,30 +3528,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Geeetech/M201/Configuration_adv.h b/config/examples/Geeetech/M201/Configuration_adv.h index ba941eee5f..8402a21148 100644 --- a/config/examples/Geeetech/M201/Configuration_adv.h +++ b/config/examples/Geeetech/M201/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Geeetech/MeCreator2/Configuration_adv.h b/config/examples/Geeetech/MeCreator2/Configuration_adv.h index f460c0ee3a..a3403a7385 100644 --- a/config/examples/Geeetech/MeCreator2/Configuration_adv.h +++ b/config/examples/Geeetech/MeCreator2/Configuration_adv.h @@ -3528,30 +3528,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Geeetech/Me_creator/Configuration_adv.h b/config/examples/Geeetech/Me_creator/Configuration_adv.h index f637a3b525..21d210e5f0 100644 --- a/config/examples/Geeetech/Me_creator/Configuration_adv.h +++ b/config/examples/Geeetech/Me_creator/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Geeetech/Me_ducer/Configuration_adv.h b/config/examples/Geeetech/Me_ducer/Configuration_adv.h index f637a3b525..21d210e5f0 100644 --- a/config/examples/Geeetech/Me_ducer/Configuration_adv.h +++ b/config/examples/Geeetech/Me_ducer/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Geeetech/PI3A PRO/Configuration_adv.h b/config/examples/Geeetech/PI3A PRO/Configuration_adv.h index fd681eafe4..585d2e9976 100644 --- a/config/examples/Geeetech/PI3A PRO/Configuration_adv.h +++ b/config/examples/Geeetech/PI3A PRO/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h index f03ef410c1..67b13a42d4 100644 --- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h index f03ef410c1..67b13a42d4 100644 --- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/HMS434/Configuration_adv.h b/config/examples/HMS434/Configuration_adv.h index a3ab23f3a4..aee683ba98 100644 --- a/config/examples/HMS434/Configuration_adv.h +++ b/config/examples/HMS434/Configuration_adv.h @@ -3520,30 +3520,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Infitary/i3-M508/Configuration_adv.h b/config/examples/Infitary/i3-M508/Configuration_adv.h index 1347ce6765..f7a267398d 100644 --- a/config/examples/Infitary/i3-M508/Configuration_adv.h +++ b/config/examples/Infitary/i3-M508/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h b/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h index 6128c2f700..f7036716ad 100644 --- a/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h +++ b/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/JGAurora/A1/Configuration_adv.h b/config/examples/JGAurora/A1/Configuration_adv.h index 63e58530d3..6e084ed71c 100644 --- a/config/examples/JGAurora/A1/Configuration_adv.h +++ b/config/examples/JGAurora/A1/Configuration_adv.h @@ -3534,30 +3534,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/JGAurora/A5/Configuration_adv.h b/config/examples/JGAurora/A5/Configuration_adv.h index c6a1f340e8..4eebbc4cc1 100644 --- a/config/examples/JGAurora/A5/Configuration_adv.h +++ b/config/examples/JGAurora/A5/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/JGAurora/A5S/Configuration_adv.h b/config/examples/JGAurora/A5S/Configuration_adv.h index 63e58530d3..6e084ed71c 100644 --- a/config/examples/JGAurora/A5S/Configuration_adv.h +++ b/config/examples/JGAurora/A5S/Configuration_adv.h @@ -3534,30 +3534,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/JGAurora/Magic/Configuration_adv.h b/config/examples/JGAurora/Magic/Configuration_adv.h index 64d3ffb366..01b406da8f 100644 --- a/config/examples/JGAurora/Magic/Configuration_adv.h +++ b/config/examples/JGAurora/Magic/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Kingroon/KP3/Configuration_adv.h b/config/examples/Kingroon/KP3/Configuration_adv.h index fd2f84365a..40c8670cad 100644 --- a/config/examples/Kingroon/KP3/Configuration_adv.h +++ b/config/examples/Kingroon/KP3/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/MBot/Cube/Configuration_adv.h b/config/examples/MBot/Cube/Configuration_adv.h index f846d878ad..8adc35279e 100644 --- a/config/examples/MBot/Cube/Configuration_adv.h +++ b/config/examples/MBot/Cube/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h b/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h index c695db1e6a..71f315b3ea 100644 --- a/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h +++ b/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h @@ -3523,30 +3523,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/MakerParts/Configuration_adv.h b/config/examples/MakerParts/Configuration_adv.h index 17817876fc..698832792a 100644 --- a/config/examples/MakerParts/Configuration_adv.h +++ b/config/examples/MakerParts/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Malyan/M150/Configuration_adv.h b/config/examples/Malyan/M150/Configuration_adv.h index 23a45e6e1e..d99f732371 100644 --- a/config/examples/Malyan/M150/Configuration_adv.h +++ b/config/examples/Malyan/M150/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Malyan/M200/Configuration_adv.h b/config/examples/Malyan/M200/Configuration_adv.h index 3136fd7c06..a140a9f49c 100644 --- a/config/examples/Malyan/M200/Configuration_adv.h +++ b/config/examples/Malyan/M200/Configuration_adv.h @@ -3531,30 +3531,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/config/examples/Micromake/C1/enhanced/Configuration_adv.h index 1ff2eb5f08..2620f55540 100644 --- a/config/examples/Micromake/C1/enhanced/Configuration_adv.h +++ b/config/examples/Micromake/C1/enhanced/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Mks/Robin/Configuration_adv.h b/config/examples/Mks/Robin/Configuration_adv.h index 31661a582e..a124c0c173 100644 --- a/config/examples/Mks/Robin/Configuration_adv.h +++ b/config/examples/Mks/Robin/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Mks/Sbase/Configuration_adv.h b/config/examples/Mks/Sbase/Configuration_adv.h index ef1832fe2d..b8107054f4 100644 --- a/config/examples/Mks/Sbase/Configuration_adv.h +++ b/config/examples/Mks/Sbase/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Modix/Big60/Configuration_adv.h b/config/examples/Modix/Big60/Configuration_adv.h index 68daf45dbe..873c957629 100644 --- a/config/examples/Modix/Big60/Configuration_adv.h +++ b/config/examples/Modix/Big60/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Ortur 4/Configuration_adv.h b/config/examples/Ortur 4/Configuration_adv.h index b08785ca4a..791ac42e7a 100644 --- a/config/examples/Ortur 4/Configuration_adv.h +++ b/config/examples/Ortur 4/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h index 6137d1d800..962c68cf84 100644 --- a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h +++ b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Qidi/Qidi 1/Configuration_adv.h b/config/examples/Qidi/Qidi 1/Configuration_adv.h index 76cd29b243..b23f4fe5c2 100644 --- a/config/examples/Qidi/Qidi 1/Configuration_adv.h +++ b/config/examples/Qidi/Qidi 1/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/RapideLite/RL200/Configuration_adv.h b/config/examples/RapideLite/RL200/Configuration_adv.h index d08eb724ff..b0529c7245 100644 --- a/config/examples/RapideLite/RL200/Configuration_adv.h +++ b/config/examples/RapideLite/RL200/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Renkforce/RF100/Configuration_adv.h b/config/examples/Renkforce/RF100/Configuration_adv.h index c74d8ecacd..8d9adcbbd1 100644 --- a/config/examples/Renkforce/RF100/Configuration_adv.h +++ b/config/examples/Renkforce/RF100/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Renkforce/RF100XL/Configuration_adv.h b/config/examples/Renkforce/RF100XL/Configuration_adv.h index c74d8ecacd..8d9adcbbd1 100644 --- a/config/examples/Renkforce/RF100XL/Configuration_adv.h +++ b/config/examples/Renkforce/RF100XL/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Renkforce/RF100v2/Configuration_adv.h b/config/examples/Renkforce/RF100v2/Configuration_adv.h index c74d8ecacd..8d9adcbbd1 100644 --- a/config/examples/Renkforce/RF100v2/Configuration_adv.h +++ b/config/examples/Renkforce/RF100v2/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/RigidBot/Configuration_adv.h b/config/examples/RigidBot/Configuration_adv.h index 1d29f9da57..7bdcb1bb62 100644 --- a/config/examples/RigidBot/Configuration_adv.h +++ b/config/examples/RigidBot/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/SCARA/MP_SCARA/Configuration_adv.h b/config/examples/SCARA/MP_SCARA/Configuration_adv.h index 48ad71f458..edb5c4060e 100644 --- a/config/examples/SCARA/MP_SCARA/Configuration_adv.h +++ b/config/examples/SCARA/MP_SCARA/Configuration_adv.h @@ -3526,30 +3526,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/SCARA/Morgan/Configuration_adv.h b/config/examples/SCARA/Morgan/Configuration_adv.h index bf96353b74..9f1b0aff70 100644 --- a/config/examples/SCARA/Morgan/Configuration_adv.h +++ b/config/examples/SCARA/Morgan/Configuration_adv.h @@ -3526,30 +3526,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h index 2e79c24775..ad5b117427 100644 --- a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h +++ b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Sanguinololu/Configuration_adv.h b/config/examples/Sanguinololu/Configuration_adv.h index a642615fcb..ff335906a7 100644 --- a/config/examples/Sanguinololu/Configuration_adv.h +++ b/config/examples/Sanguinololu/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Sovol/SV-01/Configuration_adv.h b/config/examples/Sovol/SV-01/Configuration_adv.h index 645f4f7ae9..e7e660e418 100644 --- a/config/examples/Sovol/SV-01/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/Configuration_adv.h @@ -3526,30 +3526,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Tevo/Michelangelo/Configuration_adv.h b/config/examples/Tevo/Michelangelo/Configuration_adv.h index fd2cdd33b6..aa1841d236 100644 --- a/config/examples/Tevo/Michelangelo/Configuration_adv.h +++ b/config/examples/Tevo/Michelangelo/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Tevo/Nereus/Configuration_adv.h b/config/examples/Tevo/Nereus/Configuration_adv.h index 99358080ef..17063d3a98 100644 --- a/config/examples/Tevo/Nereus/Configuration_adv.h +++ b/config/examples/Tevo/Nereus/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Tevo/Tarantula Pro/Configuration_adv.h b/config/examples/Tevo/Tarantula Pro/Configuration_adv.h index 2d3d3d7c34..e7aaa24196 100644 --- a/config/examples/Tevo/Tarantula Pro/Configuration_adv.h +++ b/config/examples/Tevo/Tarantula Pro/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h index f14f99ecb0..782167b9e3 100644 --- a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h +++ b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h index f14f99ecb0..782167b9e3 100644 --- a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h +++ b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/TheBorg/Configuration_adv.h b/config/examples/TheBorg/Configuration_adv.h index 00130eb248..dd91143e58 100644 --- a/config/examples/TheBorg/Configuration_adv.h +++ b/config/examples/TheBorg/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/TinyBoy2/Configuration_adv.h b/config/examples/TinyBoy2/Configuration_adv.h index 6c75e80343..9b8d1b0537 100644 --- a/config/examples/TinyBoy2/Configuration_adv.h +++ b/config/examples/TinyBoy2/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Tronxy/X3A/Configuration_adv.h b/config/examples/Tronxy/X3A/Configuration_adv.h index 9aa5216e01..e0e8474544 100644 --- a/config/examples/Tronxy/X3A/Configuration_adv.h +++ b/config/examples/Tronxy/X3A/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Tronxy/X5S-2E/Configuration_adv.h b/config/examples/Tronxy/X5S-2E/Configuration_adv.h index b623707ad2..e15221c984 100644 --- a/config/examples/Tronxy/X5S-2E/Configuration_adv.h +++ b/config/examples/Tronxy/X5S-2E/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Tronxy/X5SA/Configuration_adv.h b/config/examples/Tronxy/X5SA/Configuration_adv.h index 6ab47dc6c2..b98075294b 100644 --- a/config/examples/Tronxy/X5SA/Configuration_adv.h +++ b/config/examples/Tronxy/X5SA/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/UltiMachine/Archim1/Configuration_adv.h b/config/examples/UltiMachine/Archim1/Configuration_adv.h index bd15bcc21a..be4db5b67f 100644 --- a/config/examples/UltiMachine/Archim1/Configuration_adv.h +++ b/config/examples/UltiMachine/Archim1/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/UltiMachine/Archim2/Configuration_adv.h b/config/examples/UltiMachine/Archim2/Configuration_adv.h index a5120ad563..201ee038c2 100644 --- a/config/examples/UltiMachine/Archim2/Configuration_adv.h +++ b/config/examples/UltiMachine/Archim2/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/VORONDesign/Configuration_adv.h b/config/examples/VORONDesign/Configuration_adv.h index 495bab281e..aedd4ec82d 100644 --- a/config/examples/VORONDesign/Configuration_adv.h +++ b/config/examples/VORONDesign/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Velleman/K8200/Configuration_adv.h b/config/examples/Velleman/K8200/Configuration_adv.h index 629646de0a..cd86929f98 100644 --- a/config/examples/Velleman/K8200/Configuration_adv.h +++ b/config/examples/Velleman/K8200/Configuration_adv.h @@ -3542,30 +3542,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h b/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h index f5fe077ce2..e417c4888f 100644 --- a/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h +++ b/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Velleman/K8400/Single-head/Configuration_adv.h b/config/examples/Velleman/K8400/Single-head/Configuration_adv.h index f5fe077ce2..e417c4888f 100644 --- a/config/examples/Velleman/K8400/Single-head/Configuration_adv.h +++ b/config/examples/Velleman/K8400/Single-head/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/WASP/PowerWASP/Configuration_adv.h b/config/examples/WASP/PowerWASP/Configuration_adv.h index 0ae3140ecc..6272285565 100644 --- a/config/examples/WASP/PowerWASP/Configuration_adv.h +++ b/config/examples/WASP/PowerWASP/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h b/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h index 4f35a0549f..c4b890f7c5 100644 --- a/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h index 0845a5717c..225fa5c65f 100644 --- a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h @@ -3531,30 +3531,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h index be631cf75b..92841c43ad 100644 --- a/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h index 94d8ad3609..79d036701e 100644 --- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Weistek/wt150/Configuration_adv.h b/config/examples/Weistek/wt150/Configuration_adv.h index 2e10ff6ff1..72957a04c2 100644 --- a/config/examples/Weistek/wt150/Configuration_adv.h +++ b/config/examples/Weistek/wt150/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Zonestar/P802M/Configuration_adv.h b/config/examples/Zonestar/P802M/Configuration_adv.h index 2948303d57..28fd852c23 100644 --- a/config/examples/Zonestar/P802M/Configuration_adv.h +++ b/config/examples/Zonestar/P802M/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h index 16e48f2f34..e2de783546 100755 --- a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h +++ b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h @@ -3525,30 +3525,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h index bb2677971a..6f3a1ae084 100644 --- a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h @@ -3532,30 +3532,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h index 82eed21899..64c01d6093 100644 --- a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h @@ -3531,30 +3531,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/delta/Anycubic/Predator/Configuration_adv.h b/config/examples/delta/Anycubic/Predator/Configuration_adv.h index 6e3a42a651..2add86d0b0 100644 --- a/config/examples/delta/Anycubic/Predator/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Predator/Configuration_adv.h @@ -3543,30 +3543,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h index 05fdcf9c4b..3b3740278f 100644 --- a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h +++ b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h @@ -3530,30 +3530,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h index 7b98e8ac67..d4fff4ce3e 100644 --- a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h +++ b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h @@ -3531,30 +3531,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h b/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h index a5b8f1eaff..4617b114ec 100644 --- a/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h +++ b/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h @@ -3531,30 +3531,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h b/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h index 9057427fd2..975bd1b47b 100644 --- a/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h +++ b/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h @@ -3532,30 +3532,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h index d0ffa0cb75..554d8af3f5 100644 --- a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h +++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h @@ -3531,30 +3531,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/delta/FLSUN/kossel/Configuration_adv.h b/config/examples/delta/FLSUN/kossel/Configuration_adv.h index d0ffa0cb75..554d8af3f5 100644 --- a/config/examples/delta/FLSUN/kossel/Configuration_adv.h +++ b/config/examples/delta/FLSUN/kossel/Configuration_adv.h @@ -3531,30 +3531,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h index 5009e491de..71109df94b 100644 --- a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h +++ b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h @@ -3531,30 +3531,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/delta/Geeetech/G2/Configuration_adv.h b/config/examples/delta/Geeetech/G2/Configuration_adv.h index 6d20b6a99d..e7883e5a9a 100644 --- a/config/examples/delta/Geeetech/G2/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2/Configuration_adv.h @@ -3531,30 +3531,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h b/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h index c01261f8b9..4c08d341ab 100644 --- a/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h @@ -3531,30 +3531,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/delta/Geeetech/G2S/Configuration_adv.h b/config/examples/delta/Geeetech/G2S/Configuration_adv.h index c01261f8b9..4c08d341ab 100644 --- a/config/examples/delta/Geeetech/G2S/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2S/Configuration_adv.h @@ -3531,30 +3531,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h b/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h index c01261f8b9..4c08d341ab 100644 --- a/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h @@ -3531,30 +3531,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h index e8be5699de..6e37c1fcd5 100644 --- a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h +++ b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h @@ -3531,30 +3531,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h b/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h index d172b45753..9c1886166e 100644 --- a/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h +++ b/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h @@ -3531,30 +3531,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/delta/MKS/SBASE/Configuration_adv.h b/config/examples/delta/MKS/SBASE/Configuration_adv.h index 2e262c9553..901cafe797 100644 --- a/config/examples/delta/MKS/SBASE/Configuration_adv.h +++ b/config/examples/delta/MKS/SBASE/Configuration_adv.h @@ -3531,30 +3531,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/delta/Malyan M300/Configuration_adv.h b/config/examples/delta/Malyan M300/Configuration_adv.h index 4e0f306c88..721d6cef69 100644 --- a/config/examples/delta/Malyan M300/Configuration_adv.h +++ b/config/examples/delta/Malyan M300/Configuration_adv.h @@ -3531,30 +3531,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/delta/Tevo Little Monster/Configuration_adv.h b/config/examples/delta/Tevo Little Monster/Configuration_adv.h index ff8e453c79..0be7cdf546 100644 --- a/config/examples/delta/Tevo Little Monster/Configuration_adv.h +++ b/config/examples/delta/Tevo Little Monster/Configuration_adv.h @@ -3531,30 +3531,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/delta/generic/Configuration_adv.h b/config/examples/delta/generic/Configuration_adv.h index 5009e491de..71109df94b 100644 --- a/config/examples/delta/generic/Configuration_adv.h +++ b/config/examples/delta/generic/Configuration_adv.h @@ -3531,30 +3531,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/delta/kossel_clear/Configuration_adv.h b/config/examples/delta/kossel_clear/Configuration_adv.h index 7ebd811ad8..1f74fe3dc6 100644 --- a/config/examples/delta/kossel_clear/Configuration_adv.h +++ b/config/examples/delta/kossel_clear/Configuration_adv.h @@ -3531,30 +3531,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/delta/kossel_xl/Configuration_adv.h b/config/examples/delta/kossel_xl/Configuration_adv.h index 7331c9f527..2fcc819550 100644 --- a/config/examples/delta/kossel_xl/Configuration_adv.h +++ b/config/examples/delta/kossel_xl/Configuration_adv.h @@ -3531,30 +3531,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/config/examples/gCreate/gMax1.5+/Configuration_adv.h index e4514e8956..29c7cf9c4e 100644 --- a/config/examples/gCreate/gMax1.5+/Configuration_adv.h +++ b/config/examples/gCreate/gMax1.5+/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/makibox/Configuration_adv.h b/config/examples/makibox/Configuration_adv.h index 7fd2e27609..a14040a24e 100644 --- a/config/examples/makibox/Configuration_adv.h +++ b/config/examples/makibox/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor diff --git a/config/examples/tvrrug/Round2/Configuration_adv.h b/config/examples/tvrrug/Round2/Configuration_adv.h index cc0fa32f13..ae06b79e3c 100644 --- a/config/examples/tvrrug/Round2/Configuration_adv.h +++ b/config/examples/tvrrug/Round2/Configuration_adv.h @@ -3529,30 +3529,29 @@ // Add an LCD menu for MMU2 //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Průša MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 1145 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - #endif + // Settings for filament load / unload. + // This is for Průša MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 1145 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } /** * MMU Extruder Sensor