diff --git a/config/default/Configuration_adv.h b/config/default/Configuration_adv.h
index 3f79f28af0..c715fe3332 100644
--- a/config/default/Configuration_adv.h
+++ b/config/default/Configuration_adv.h
@@ -1600,10 +1600,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h
index 9cf47a09c8..aeaf65de5d 100644
--- a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h
+++ b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h
index f26febf1ba..b3411b271b 100644
--- a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h	
+++ b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h	
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h
index 35f8d68e36..5c017f50bf 100644
--- a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h	
+++ b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h	
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/AlephObjects/TAZ4/Configuration_adv.h b/config/examples/AlephObjects/TAZ4/Configuration_adv.h
index adfdeca52b..e9b39b4da7 100644
--- a/config/examples/AlephObjects/TAZ4/Configuration_adv.h
+++ b/config/examples/AlephObjects/TAZ4/Configuration_adv.h
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h
index 098ec93fb4..52e3093c84 100644
--- a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h
+++ b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h
@@ -1599,10 +1599,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/Alfawise/U20/Configuration_adv.h b/config/examples/Alfawise/U20/Configuration_adv.h
index fb5bb1df90..c5b2426060 100644
--- a/config/examples/Alfawise/U20/Configuration_adv.h
+++ b/config/examples/Alfawise/U20/Configuration_adv.h
@@ -1598,10 +1598,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/AliExpress/UM2pExt/Configuration_adv.h b/config/examples/AliExpress/UM2pExt/Configuration_adv.h
index cecb90220a..2bfebf7d3f 100644
--- a/config/examples/AliExpress/UM2pExt/Configuration_adv.h
+++ b/config/examples/AliExpress/UM2pExt/Configuration_adv.h
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/Anet/A2/Configuration_adv.h b/config/examples/Anet/A2/Configuration_adv.h
index cfc9f477d9..c6ac44758a 100644
--- a/config/examples/Anet/A2/Configuration_adv.h
+++ b/config/examples/Anet/A2/Configuration_adv.h
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/Anet/A2plus/Configuration_adv.h b/config/examples/Anet/A2plus/Configuration_adv.h
index cfc9f477d9..c6ac44758a 100644
--- a/config/examples/Anet/A2plus/Configuration_adv.h
+++ b/config/examples/Anet/A2plus/Configuration_adv.h
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/Anet/A6/Configuration_adv.h b/config/examples/Anet/A6/Configuration_adv.h
index 9b172bbcbf..a5792f0bba 100644
--- a/config/examples/Anet/A6/Configuration_adv.h
+++ b/config/examples/Anet/A6/Configuration_adv.h
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/Anet/A8/Configuration_adv.h b/config/examples/Anet/A8/Configuration_adv.h
index a2738ef28f..0d686d5571 100644
--- a/config/examples/Anet/A8/Configuration_adv.h
+++ b/config/examples/Anet/A8/Configuration_adv.h
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/Anet/A8plus/Configuration_adv.h b/config/examples/Anet/A8plus/Configuration_adv.h
index a1ca0e47bb..7febe3c34a 100644
--- a/config/examples/Anet/A8plus/Configuration_adv.h
+++ b/config/examples/Anet/A8plus/Configuration_adv.h
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/Anet/E10/Configuration_adv.h b/config/examples/Anet/E10/Configuration_adv.h
index 887c203672..04a1cb54e3 100644
--- a/config/examples/Anet/E10/Configuration_adv.h
+++ b/config/examples/Anet/E10/Configuration_adv.h
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/Anet/E16/Configuration_adv.h b/config/examples/Anet/E16/Configuration_adv.h
index 7260310184..3782ee59a5 100644
--- a/config/examples/Anet/E16/Configuration_adv.h
+++ b/config/examples/Anet/E16/Configuration_adv.h
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/AnyCubic/i3/Configuration_adv.h b/config/examples/AnyCubic/i3/Configuration_adv.h
index 52d4bec548..a6c43b9dd0 100644
--- a/config/examples/AnyCubic/i3/Configuration_adv.h
+++ b/config/examples/AnyCubic/i3/Configuration_adv.h
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/ArmEd/Configuration_adv.h b/config/examples/ArmEd/Configuration_adv.h
index 8e9898188d..b2ac356631 100644
--- a/config/examples/ArmEd/Configuration_adv.h
+++ b/config/examples/ArmEd/Configuration_adv.h
@@ -1601,10 +1601,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/Artillery/Genius/Configuration_adv.h b/config/examples/Artillery/Genius/Configuration_adv.h
index 09442bb78f..01fbfc460c 100755
--- a/config/examples/Artillery/Genius/Configuration_adv.h
+++ b/config/examples/Artillery/Genius/Configuration_adv.h
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/Artillery/Sidewinder X1/Configuration_adv.h b/config/examples/Artillery/Sidewinder X1/Configuration_adv.h
index 09442bb78f..01fbfc460c 100755
--- a/config/examples/Artillery/Sidewinder X1/Configuration_adv.h	
+++ b/config/examples/Artillery/Sidewinder X1/Configuration_adv.h	
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
index ca38bb314d..b19b7f089b 100644
--- a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
+++ b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/BIBO/TouchX/default/Configuration_adv.h b/config/examples/BIBO/TouchX/default/Configuration_adv.h
index 4e98c3ff36..d24e2183d1 100644
--- a/config/examples/BIBO/TouchX/default/Configuration_adv.h
+++ b/config/examples/BIBO/TouchX/default/Configuration_adv.h
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/BQ/Hephestos/Configuration_adv.h b/config/examples/BQ/Hephestos/Configuration_adv.h
index 12921aa438..261fffe976 100644
--- a/config/examples/BQ/Hephestos/Configuration_adv.h
+++ b/config/examples/BQ/Hephestos/Configuration_adv.h
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/BQ/Hephestos_2/Configuration_adv.h b/config/examples/BQ/Hephestos_2/Configuration_adv.h
index 64ec10849f..ab41435318 100644
--- a/config/examples/BQ/Hephestos_2/Configuration_adv.h
+++ b/config/examples/BQ/Hephestos_2/Configuration_adv.h
@@ -1605,10 +1605,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/BQ/WITBOX/Configuration_adv.h b/config/examples/BQ/WITBOX/Configuration_adv.h
index 12921aa438..261fffe976 100644
--- a/config/examples/BQ/WITBOX/Configuration_adv.h
+++ b/config/examples/BQ/WITBOX/Configuration_adv.h
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/BigTreeTech/BTT002 - Prusa MK3S - TMC2209/Configuration_adv.h b/config/examples/BigTreeTech/BTT002 - Prusa MK3S - TMC2209/Configuration_adv.h
index 0bb80a0105..e000ff7746 100644
--- a/config/examples/BigTreeTech/BTT002 - Prusa MK3S - TMC2209/Configuration_adv.h	
+++ b/config/examples/BigTreeTech/BTT002 - Prusa MK3S - TMC2209/Configuration_adv.h	
@@ -1596,10 +1596,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 245, 6, 105 }  // right-front
 
diff --git a/config/examples/BigTreeTech/SKR Mini E3 1.0/Configuration_adv.h b/config/examples/BigTreeTech/SKR Mini E3 1.0/Configuration_adv.h
index 795646cb32..a9a3c24434 100644
--- a/config/examples/BigTreeTech/SKR Mini E3 1.0/Configuration_adv.h	
+++ b/config/examples/BigTreeTech/SKR Mini E3 1.0/Configuration_adv.h	
@@ -1599,10 +1599,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/BigTreeTech/SKR Mini E3 1.2/Configuration_adv.h b/config/examples/BigTreeTech/SKR Mini E3 1.2/Configuration_adv.h
index f2b0600a64..a898cf50a8 100644
--- a/config/examples/BigTreeTech/SKR Mini E3 1.2/Configuration_adv.h	
+++ b/config/examples/BigTreeTech/SKR Mini E3 1.2/Configuration_adv.h	
@@ -1599,10 +1599,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/Cartesio/Configuration_adv.h b/config/examples/Cartesio/Configuration_adv.h
index e7416f4089..606227b027 100644
--- a/config/examples/Cartesio/Configuration_adv.h
+++ b/config/examples/Cartesio/Configuration_adv.h
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/Copymaster3D/300/Configuration_adv.h b/config/examples/Copymaster3D/300/Configuration_adv.h
index 3f79f28af0..c715fe3332 100644
--- a/config/examples/Copymaster3D/300/Configuration_adv.h
+++ b/config/examples/Copymaster3D/300/Configuration_adv.h
@@ -1600,10 +1600,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/Copymaster3D/400/Configuration_adv.h b/config/examples/Copymaster3D/400/Configuration_adv.h
index 3f79f28af0..c715fe3332 100644
--- a/config/examples/Copymaster3D/400/Configuration_adv.h
+++ b/config/examples/Copymaster3D/400/Configuration_adv.h
@@ -1600,10 +1600,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/Copymaster3D/500/Configuration_adv.h b/config/examples/Copymaster3D/500/Configuration_adv.h
index 3f79f28af0..c715fe3332 100644
--- a/config/examples/Copymaster3D/500/Configuration_adv.h
+++ b/config/examples/Copymaster3D/500/Configuration_adv.h
@@ -1600,10 +1600,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/Creality/CR-10/Configuration_adv.h b/config/examples/Creality/CR-10/Configuration_adv.h
index 13916ae74b..f7dc869a24 100644
--- a/config/examples/Creality/CR-10/Configuration_adv.h
+++ b/config/examples/Creality/CR-10/Configuration_adv.h
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/Creality/CR-10S/Configuration_adv.h b/config/examples/Creality/CR-10S/Configuration_adv.h
index 96f50d73f5..31bf60fffd 100644
--- a/config/examples/Creality/CR-10S/Configuration_adv.h
+++ b/config/examples/Creality/CR-10S/Configuration_adv.h
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/Creality/CR-10_5S/Configuration_adv.h b/config/examples/Creality/CR-10_5S/Configuration_adv.h
index a66818a7a3..1ba9163c14 100644
--- a/config/examples/Creality/CR-10_5S/Configuration_adv.h
+++ b/config/examples/Creality/CR-10_5S/Configuration_adv.h
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/Creality/CR-10mini/Configuration_adv.h b/config/examples/Creality/CR-10mini/Configuration_adv.h
index 35b90435ce..1ae0954b74 100644
--- a/config/examples/Creality/CR-10mini/Configuration_adv.h
+++ b/config/examples/Creality/CR-10mini/Configuration_adv.h
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/Creality/CR-20 Pro/Configuration_adv.h b/config/examples/Creality/CR-20 Pro/Configuration_adv.h
index b065201b83..4b6883c6a6 100644
--- a/config/examples/Creality/CR-20 Pro/Configuration_adv.h	
+++ b/config/examples/Creality/CR-20 Pro/Configuration_adv.h	
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/Creality/CR-20/Configuration_adv.h b/config/examples/Creality/CR-20/Configuration_adv.h
index 428d632661..495ec720bc 100644
--- a/config/examples/Creality/CR-20/Configuration_adv.h
+++ b/config/examples/Creality/CR-20/Configuration_adv.h
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/Creality/CR-8/Configuration_adv.h b/config/examples/Creality/CR-8/Configuration_adv.h
index 1bdff7b288..a88758552b 100644
--- a/config/examples/Creality/CR-8/Configuration_adv.h
+++ b/config/examples/Creality/CR-8/Configuration_adv.h
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/Creality/Ender-2/Configuration_adv.h b/config/examples/Creality/Ender-2/Configuration_adv.h
index 798bb9739b..b998ea1793 100644
--- a/config/examples/Creality/Ender-2/Configuration_adv.h
+++ b/config/examples/Creality/Ender-2/Configuration_adv.h
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/Creality/Ender-3/Configuration_adv.h b/config/examples/Creality/Ender-3/Configuration_adv.h
index ec3049c363..f6fca49bea 100644
--- a/config/examples/Creality/Ender-3/Configuration_adv.h
+++ b/config/examples/Creality/Ender-3/Configuration_adv.h
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/Creality/Ender-4/Configuration_adv.h b/config/examples/Creality/Ender-4/Configuration_adv.h
index 2ede659414..86e7c7a314 100644
--- a/config/examples/Creality/Ender-4/Configuration_adv.h
+++ b/config/examples/Creality/Ender-4/Configuration_adv.h
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/Creality/Ender-5 Pro/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/Configuration_adv.h
index 7ef7682607..824c5fe6fc 100644
--- a/config/examples/Creality/Ender-5 Pro/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-5 Pro/Configuration_adv.h	
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/Creality/Ender-5/Configuration_adv.h b/config/examples/Creality/Ender-5/Configuration_adv.h
index e860bbc7b4..2822038eb1 100644
--- a/config/examples/Creality/Ender-5/Configuration_adv.h
+++ b/config/examples/Creality/Ender-5/Configuration_adv.h
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h
index 07d3bd7276..b67be74b9a 100644
--- a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h	
+++ b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h	
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h b/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h
index 46c2037645..b85e9e54d6 100644
--- a/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h	
+++ b/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h	
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/Einstart-S/Configuration_adv.h b/config/examples/Einstart-S/Configuration_adv.h
index 7da2f24f13..b71ddae46b 100644
--- a/config/examples/Einstart-S/Configuration_adv.h
+++ b/config/examples/Einstart-S/Configuration_adv.h
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/FYSETC/AIO_II/Configuration_adv.h b/config/examples/FYSETC/AIO_II/Configuration_adv.h
index a74a7469e1..f81fdf7e95 100644
--- a/config/examples/FYSETC/AIO_II/Configuration_adv.h
+++ b/config/examples/FYSETC/AIO_II/Configuration_adv.h
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration_adv.h b/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration_adv.h
index 60464fc59c..6e9ea4aeb2 100644
--- a/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration_adv.h	
+++ b/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration_adv.h	
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/FYSETC/Cheetah 1.2/base/Configuration_adv.h b/config/examples/FYSETC/Cheetah 1.2/base/Configuration_adv.h
index 60464fc59c..6e9ea4aeb2 100644
--- a/config/examples/FYSETC/Cheetah 1.2/base/Configuration_adv.h	
+++ b/config/examples/FYSETC/Cheetah 1.2/base/Configuration_adv.h	
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h b/config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h
index 60464fc59c..6e9ea4aeb2 100644
--- a/config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h
+++ b/config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/FYSETC/Cheetah/base/Configuration_adv.h b/config/examples/FYSETC/Cheetah/base/Configuration_adv.h
index 60464fc59c..6e9ea4aeb2 100644
--- a/config/examples/FYSETC/Cheetah/base/Configuration_adv.h
+++ b/config/examples/FYSETC/Cheetah/base/Configuration_adv.h
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/FYSETC/F6_13/Configuration_adv.h b/config/examples/FYSETC/F6_13/Configuration_adv.h
index fbaea772c7..316bf1b12a 100644
--- a/config/examples/FYSETC/F6_13/Configuration_adv.h
+++ b/config/examples/FYSETC/F6_13/Configuration_adv.h
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/FYSETC/S6/Configuration_adv.h b/config/examples/FYSETC/S6/Configuration_adv.h
index 9365145e85..36238f64fa 100644
--- a/config/examples/FYSETC/S6/Configuration_adv.h
+++ b/config/examples/FYSETC/S6/Configuration_adv.h
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/Felix/DUAL/Configuration_adv.h b/config/examples/Felix/DUAL/Configuration_adv.h
index 5e03b930a3..6e9ab007eb 100644
--- a/config/examples/Felix/DUAL/Configuration_adv.h
+++ b/config/examples/Felix/DUAL/Configuration_adv.h
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/Felix/Single/Configuration_adv.h b/config/examples/Felix/Single/Configuration_adv.h
index 5e03b930a3..6e9ab007eb 100644
--- a/config/examples/Felix/Single/Configuration_adv.h
+++ b/config/examples/Felix/Single/Configuration_adv.h
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/FlashForge/CreatorPro/Configuration_adv.h b/config/examples/FlashForge/CreatorPro/Configuration_adv.h
index a91acdeaed..bfebd1eb88 100644
--- a/config/examples/FlashForge/CreatorPro/Configuration_adv.h
+++ b/config/examples/FlashForge/CreatorPro/Configuration_adv.h
@@ -1596,10 +1596,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/config/examples/FolgerTech/i3-2020/Configuration_adv.h
index b50b907ed9..a6d4bd3bce 100644
--- a/config/examples/FolgerTech/i3-2020/Configuration_adv.h
+++ b/config/examples/FolgerTech/i3-2020/Configuration_adv.h
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/Formbot/Raptor/Configuration_adv.h b/config/examples/Formbot/Raptor/Configuration_adv.h
index acaeb97eec..bc32d7dbb5 100644
--- a/config/examples/Formbot/Raptor/Configuration_adv.h
+++ b/config/examples/Formbot/Raptor/Configuration_adv.h
@@ -1599,10 +1599,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
index 3e368da365..3b5d075927 100644
--- a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
+++ b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
@@ -1599,10 +1599,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/Formbot/T_Rex_3/Configuration_adv.h b/config/examples/Formbot/T_Rex_3/Configuration_adv.h
index 7dd68695e8..2e13af7abd 100644
--- a/config/examples/Formbot/T_Rex_3/Configuration_adv.h
+++ b/config/examples/Formbot/T_Rex_3/Configuration_adv.h
@@ -1601,10 +1601,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/Geeetech/A10/Configuration_adv.h b/config/examples/Geeetech/A10/Configuration_adv.h
index ce28e56f5c..41248e6727 100644
--- a/config/examples/Geeetech/A10/Configuration_adv.h
+++ b/config/examples/Geeetech/A10/Configuration_adv.h
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/Geeetech/A10D/Configuration_adv.h b/config/examples/Geeetech/A10D/Configuration_adv.h
index d04dff3025..08f06dbd78 100644
--- a/config/examples/Geeetech/A10D/Configuration_adv.h
+++ b/config/examples/Geeetech/A10D/Configuration_adv.h
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/Geeetech/A10M/Configuration_adv.h b/config/examples/Geeetech/A10M/Configuration_adv.h
index abe3db3b73..502ee66434 100644
--- a/config/examples/Geeetech/A10M/Configuration_adv.h
+++ b/config/examples/Geeetech/A10M/Configuration_adv.h
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/Geeetech/A10T/Configuration_adv.h b/config/examples/Geeetech/A10T/Configuration_adv.h
index abe3db3b73..502ee66434 100644
--- a/config/examples/Geeetech/A10T/Configuration_adv.h
+++ b/config/examples/Geeetech/A10T/Configuration_adv.h
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/Geeetech/A20/Configuration_adv.h b/config/examples/Geeetech/A20/Configuration_adv.h
index 6a7d076d6e..8b5106d607 100644
--- a/config/examples/Geeetech/A20/Configuration_adv.h
+++ b/config/examples/Geeetech/A20/Configuration_adv.h
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/Geeetech/A20M/Configuration_adv.h b/config/examples/Geeetech/A20M/Configuration_adv.h
index 6a7d076d6e..8b5106d607 100644
--- a/config/examples/Geeetech/A20M/Configuration_adv.h
+++ b/config/examples/Geeetech/A20M/Configuration_adv.h
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/Geeetech/A20T/Configuration_adv.h b/config/examples/Geeetech/A20T/Configuration_adv.h
index 6a7d076d6e..8b5106d607 100644
--- a/config/examples/Geeetech/A20T/Configuration_adv.h
+++ b/config/examples/Geeetech/A20T/Configuration_adv.h
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/Geeetech/A30/Configuration_adv.h b/config/examples/Geeetech/A30/Configuration_adv.h
index f1e37f2dbe..dcb616f82f 100644
--- a/config/examples/Geeetech/A30/Configuration_adv.h
+++ b/config/examples/Geeetech/A30/Configuration_adv.h
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/Geeetech/D200/Configuration_adv.h b/config/examples/Geeetech/D200/Configuration_adv.h
index 060b0a0054..457b3bf494 100644
--- a/config/examples/Geeetech/D200/Configuration_adv.h
+++ b/config/examples/Geeetech/D200/Configuration_adv.h
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/Geeetech/Duplicator5/Configuration_adv.h b/config/examples/Geeetech/Duplicator5/Configuration_adv.h
index 9365145e85..36238f64fa 100644
--- a/config/examples/Geeetech/Duplicator5/Configuration_adv.h
+++ b/config/examples/Geeetech/Duplicator5/Configuration_adv.h
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/Geeetech/E180/Configuration_adv.h b/config/examples/Geeetech/E180/Configuration_adv.h
index f1e37f2dbe..dcb616f82f 100644
--- a/config/examples/Geeetech/E180/Configuration_adv.h
+++ b/config/examples/Geeetech/E180/Configuration_adv.h
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/Geeetech/M201/Configuration_adv.h b/config/examples/Geeetech/M201/Configuration_adv.h
index 060b0a0054..457b3bf494 100644
--- a/config/examples/Geeetech/M201/Configuration_adv.h
+++ b/config/examples/Geeetech/M201/Configuration_adv.h
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/Geeetech/MeCreator2/Configuration_adv.h b/config/examples/Geeetech/MeCreator2/Configuration_adv.h
index ac52bc7666..59acc7cfb0 100644
--- a/config/examples/Geeetech/MeCreator2/Configuration_adv.h
+++ b/config/examples/Geeetech/MeCreator2/Configuration_adv.h
@@ -1596,10 +1596,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/Geeetech/Me_creator/Configuration_adv.h b/config/examples/Geeetech/Me_creator/Configuration_adv.h
index 9365145e85..36238f64fa 100644
--- a/config/examples/Geeetech/Me_creator/Configuration_adv.h
+++ b/config/examples/Geeetech/Me_creator/Configuration_adv.h
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/Geeetech/Me_ducer/Configuration_adv.h b/config/examples/Geeetech/Me_ducer/Configuration_adv.h
index 9365145e85..36238f64fa 100644
--- a/config/examples/Geeetech/Me_ducer/Configuration_adv.h
+++ b/config/examples/Geeetech/Me_ducer/Configuration_adv.h
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/Geeetech/PI3A PRO/Configuration_adv.h b/config/examples/Geeetech/PI3A PRO/Configuration_adv.h
index 36eee40c72..3b4f3238e0 100644
--- a/config/examples/Geeetech/PI3A PRO/Configuration_adv.h	
+++ b/config/examples/Geeetech/PI3A PRO/Configuration_adv.h	
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h
index ce28e56f5c..41248e6727 100644
--- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h	
+++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h	
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h
index ce28e56f5c..41248e6727 100644
--- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h	
+++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h	
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/HMS434/Configuration_adv.h b/config/examples/HMS434/Configuration_adv.h
index 8c41c6e2c2..bda2c8bdee 100644
--- a/config/examples/HMS434/Configuration_adv.h
+++ b/config/examples/HMS434/Configuration_adv.h
@@ -1590,10 +1590,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/Infitary/i3-M508/Configuration_adv.h b/config/examples/Infitary/i3-M508/Configuration_adv.h
index 8c9149f268..061960d13f 100644
--- a/config/examples/Infitary/i3-M508/Configuration_adv.h
+++ b/config/examples/Infitary/i3-M508/Configuration_adv.h
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/Intamsys/FunmatHT_4988/Configuration_adv.h b/config/examples/Intamsys/FunmatHT_4988/Configuration_adv.h
index 89f1ea1e95..8e7f8a5c09 100644
--- a/config/examples/Intamsys/FunmatHT_4988/Configuration_adv.h
+++ b/config/examples/Intamsys/FunmatHT_4988/Configuration_adv.h
@@ -1600,10 +1600,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/JGAurora/A1/Configuration_adv.h b/config/examples/JGAurora/A1/Configuration_adv.h
index bbaa338be3..6cf91822f0 100644
--- a/config/examples/JGAurora/A1/Configuration_adv.h
+++ b/config/examples/JGAurora/A1/Configuration_adv.h
@@ -1602,10 +1602,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/JGAurora/A5/Configuration_adv.h b/config/examples/JGAurora/A5/Configuration_adv.h
index 62a36ed65b..01b3312d75 100644
--- a/config/examples/JGAurora/A5/Configuration_adv.h
+++ b/config/examples/JGAurora/A5/Configuration_adv.h
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/JGAurora/A5S/Configuration_adv.h b/config/examples/JGAurora/A5S/Configuration_adv.h
index bbaa338be3..6cf91822f0 100644
--- a/config/examples/JGAurora/A5S/Configuration_adv.h
+++ b/config/examples/JGAurora/A5S/Configuration_adv.h
@@ -1602,10 +1602,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/JGAurora/Magic/Configuration_adv.h b/config/examples/JGAurora/Magic/Configuration_adv.h
index 457c14c5b7..d45bc61da6 100644
--- a/config/examples/JGAurora/Magic/Configuration_adv.h
+++ b/config/examples/JGAurora/Magic/Configuration_adv.h
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/MakerFarm/Pegasus_12/Configuration_adv.h b/config/examples/MakerFarm/Pegasus_12/Configuration_adv.h
index c879b69774..e2d8b83178 100644
--- a/config/examples/MakerFarm/Pegasus_12/Configuration_adv.h
+++ b/config/examples/MakerFarm/Pegasus_12/Configuration_adv.h
@@ -1596,10 +1596,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/MakerParts/Configuration_adv.h b/config/examples/MakerParts/Configuration_adv.h
index 2c0788628c..9c3176b600 100644
--- a/config/examples/MakerParts/Configuration_adv.h
+++ b/config/examples/MakerParts/Configuration_adv.h
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/Malyan/M150/Configuration_adv.h b/config/examples/Malyan/M150/Configuration_adv.h
index 2f65219b00..97d81d8cd3 100644
--- a/config/examples/Malyan/M150/Configuration_adv.h
+++ b/config/examples/Malyan/M150/Configuration_adv.h
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/Malyan/M200/Configuration_adv.h b/config/examples/Malyan/M200/Configuration_adv.h
index 4bea0b8701..ec2dc5aa7b 100644
--- a/config/examples/Malyan/M200/Configuration_adv.h
+++ b/config/examples/Malyan/M200/Configuration_adv.h
@@ -1599,10 +1599,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/config/examples/Micromake/C1/enhanced/Configuration_adv.h
index ca052c438a..15551c2772 100644
--- a/config/examples/Micromake/C1/enhanced/Configuration_adv.h
+++ b/config/examples/Micromake/C1/enhanced/Configuration_adv.h
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/Mks/Robin/Configuration_adv.h b/config/examples/Mks/Robin/Configuration_adv.h
index 3e8e4a2081..8817394b19 100644
--- a/config/examples/Mks/Robin/Configuration_adv.h
+++ b/config/examples/Mks/Robin/Configuration_adv.h
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/Mks/Sbase/Configuration_adv.h b/config/examples/Mks/Sbase/Configuration_adv.h
index 3d8701ef50..fe9a6245c7 100644
--- a/config/examples/Mks/Sbase/Configuration_adv.h
+++ b/config/examples/Mks/Sbase/Configuration_adv.h
@@ -1598,10 +1598,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/Modix/Big60/Configuration_adv.h b/config/examples/Modix/Big60/Configuration_adv.h
index 3961efd118..01d58a1130 100644
--- a/config/examples/Modix/Big60/Configuration_adv.h
+++ b/config/examples/Modix/Big60/Configuration_adv.h
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/RapideLite/RL200/Configuration_adv.h b/config/examples/RapideLite/RL200/Configuration_adv.h
index eb66690ab8..0606d6f6b7 100644
--- a/config/examples/RapideLite/RL200/Configuration_adv.h
+++ b/config/examples/RapideLite/RL200/Configuration_adv.h
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/Renkforce/RF100/Configuration_adv.h b/config/examples/Renkforce/RF100/Configuration_adv.h
index d264fe8e4c..8104fd85a9 100644
--- a/config/examples/Renkforce/RF100/Configuration_adv.h
+++ b/config/examples/Renkforce/RF100/Configuration_adv.h
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/Renkforce/RF100XL/Configuration_adv.h b/config/examples/Renkforce/RF100XL/Configuration_adv.h
index d264fe8e4c..8104fd85a9 100644
--- a/config/examples/Renkforce/RF100XL/Configuration_adv.h
+++ b/config/examples/Renkforce/RF100XL/Configuration_adv.h
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/Renkforce/RF100v2/Configuration_adv.h b/config/examples/Renkforce/RF100v2/Configuration_adv.h
index d264fe8e4c..8104fd85a9 100644
--- a/config/examples/Renkforce/RF100v2/Configuration_adv.h
+++ b/config/examples/Renkforce/RF100v2/Configuration_adv.h
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/RigidBot/Configuration_adv.h b/config/examples/RigidBot/Configuration_adv.h
index ff95346088..fb80ee96ee 100644
--- a/config/examples/RigidBot/Configuration_adv.h
+++ b/config/examples/RigidBot/Configuration_adv.h
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/SCARA/MP_SCARA/Configuration_adv.h b/config/examples/SCARA/MP_SCARA/Configuration_adv.h
index 7f4ee915f2..ee0e982d47 100644
--- a/config/examples/SCARA/MP_SCARA/Configuration_adv.h
+++ b/config/examples/SCARA/MP_SCARA/Configuration_adv.h
@@ -1594,10 +1594,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/SCARA/Morgan/Configuration_adv.h b/config/examples/SCARA/Morgan/Configuration_adv.h
index 8a742cfc6f..0b8d34a761 100644
--- a/config/examples/SCARA/Morgan/Configuration_adv.h
+++ b/config/examples/SCARA/Morgan/Configuration_adv.h
@@ -1594,10 +1594,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h
index 6849c33697..e452bca505 100644
--- a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h
+++ b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/Sanguinololu/Configuration_adv.h b/config/examples/Sanguinololu/Configuration_adv.h
index 9f0afd44f7..50a5ae161f 100644
--- a/config/examples/Sanguinololu/Configuration_adv.h
+++ b/config/examples/Sanguinololu/Configuration_adv.h
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/Tevo/Michelangelo/Configuration_adv.h b/config/examples/Tevo/Michelangelo/Configuration_adv.h
index c3bf2097d3..25f98d0d99 100644
--- a/config/examples/Tevo/Michelangelo/Configuration_adv.h
+++ b/config/examples/Tevo/Michelangelo/Configuration_adv.h
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/Tevo/Nereus/Configuration_adv.h b/config/examples/Tevo/Nereus/Configuration_adv.h
index c042cd4f25..1b28ddc5d3 100755
--- a/config/examples/Tevo/Nereus/Configuration_adv.h
+++ b/config/examples/Tevo/Nereus/Configuration_adv.h
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/Tevo/Tarantula Pro/Configuration_adv.h b/config/examples/Tevo/Tarantula Pro/Configuration_adv.h
index 250022a1ba..80fe368630 100755
--- a/config/examples/Tevo/Tarantula Pro/Configuration_adv.h	
+++ b/config/examples/Tevo/Tarantula Pro/Configuration_adv.h	
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h
index fd525771dd..42e06c849c 100755
--- a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h	
+++ b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h	
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h
index fd525771dd..42e06c849c 100755
--- a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h	
+++ b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h	
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/TheBorg/Configuration_adv.h b/config/examples/TheBorg/Configuration_adv.h
index 471c0f4cf3..9c550ca337 100644
--- a/config/examples/TheBorg/Configuration_adv.h
+++ b/config/examples/TheBorg/Configuration_adv.h
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/TinyBoy2/Configuration_adv.h b/config/examples/TinyBoy2/Configuration_adv.h
index f77b84b785..4738b79317 100644
--- a/config/examples/TinyBoy2/Configuration_adv.h
+++ b/config/examples/TinyBoy2/Configuration_adv.h
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/Tronxy/X3A/Configuration_adv.h b/config/examples/Tronxy/X3A/Configuration_adv.h
index 3be9f9edba..d9b219d3a6 100644
--- a/config/examples/Tronxy/X3A/Configuration_adv.h
+++ b/config/examples/Tronxy/X3A/Configuration_adv.h
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/Tronxy/X5S-2E/Configuration_adv.h b/config/examples/Tronxy/X5S-2E/Configuration_adv.h
index ebbcc1cdd5..7a32e50117 100644
--- a/config/examples/Tronxy/X5S-2E/Configuration_adv.h
+++ b/config/examples/Tronxy/X5S-2E/Configuration_adv.h
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/UltiMachine/Archim1/Configuration_adv.h b/config/examples/UltiMachine/Archim1/Configuration_adv.h
index abfd457832..4fdc477f0b 100644
--- a/config/examples/UltiMachine/Archim1/Configuration_adv.h
+++ b/config/examples/UltiMachine/Archim1/Configuration_adv.h
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/UltiMachine/Archim2/Configuration_adv.h b/config/examples/UltiMachine/Archim2/Configuration_adv.h
index 17ce99c883..412ff4361b 100644
--- a/config/examples/UltiMachine/Archim2/Configuration_adv.h
+++ b/config/examples/UltiMachine/Archim2/Configuration_adv.h
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/VORONDesign/Configuration_adv.h b/config/examples/VORONDesign/Configuration_adv.h
index 3944fc9e36..670bca0e79 100644
--- a/config/examples/VORONDesign/Configuration_adv.h
+++ b/config/examples/VORONDesign/Configuration_adv.h
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/Velleman/K8200/Configuration_adv.h b/config/examples/Velleman/K8200/Configuration_adv.h
index 433ce30d86..858b19f2d1 100644
--- a/config/examples/Velleman/K8200/Configuration_adv.h
+++ b/config/examples/Velleman/K8200/Configuration_adv.h
@@ -1610,10 +1610,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h b/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h
index 4b3c867929..fd0229543f 100644
--- a/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h
+++ b/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/Velleman/K8400/Single-head/Configuration_adv.h b/config/examples/Velleman/K8400/Single-head/Configuration_adv.h
index 4b3c867929..fd0229543f 100644
--- a/config/examples/Velleman/K8400/Single-head/Configuration_adv.h
+++ b/config/examples/Velleman/K8400/Single-head/Configuration_adv.h
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/WASP/PowerWASP/Configuration_adv.h b/config/examples/WASP/PowerWASP/Configuration_adv.h
index f132623544..f8b87ab88f 100644
--- a/config/examples/WASP/PowerWASP/Configuration_adv.h
+++ b/config/examples/WASP/PowerWASP/Configuration_adv.h
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h
index b7ef05831e..846015d462 100644
--- a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h	
+++ b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h	
@@ -1599,10 +1599,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h
index dfcb936e24..1001a4d1bf 100644
--- a/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h	
+++ b/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h	
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h
index da7a9f1c05..04b6194799 100644
--- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h	
+++ b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h	
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h
index f38207ef33..35071cf2aa 100644
--- a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h
+++ b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h
@@ -1599,10 +1599,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h
index 757c83eb69..40586944e7 100644
--- a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h
+++ b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h
@@ -1598,10 +1598,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h
index 78e283b5d8..69acedc2f3 100644
--- a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h
+++ b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h
@@ -1599,10 +1599,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h b/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h
index 3a654a7cf8..1d5f1193aa 100644
--- a/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h
+++ b/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h
@@ -1599,10 +1599,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
index c55dea751a..6c0e4442f4 100644
--- a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
+++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
@@ -1599,10 +1599,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/delta/FLSUN/kossel/Configuration_adv.h b/config/examples/delta/FLSUN/kossel/Configuration_adv.h
index c55dea751a..6c0e4442f4 100644
--- a/config/examples/delta/FLSUN/kossel/Configuration_adv.h
+++ b/config/examples/delta/FLSUN/kossel/Configuration_adv.h
@@ -1599,10 +1599,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
index bd12d0ed66..3855499e64 100644
--- a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
+++ b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
@@ -1599,10 +1599,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/delta/Geeetech/G2/Configuration_adv.h b/config/examples/delta/Geeetech/G2/Configuration_adv.h
index 208df763ad..0e0096fb84 100644
--- a/config/examples/delta/Geeetech/G2/Configuration_adv.h
+++ b/config/examples/delta/Geeetech/G2/Configuration_adv.h
@@ -1599,10 +1599,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h b/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h
index eab0be5799..38caaffa4c 100644
--- a/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h
+++ b/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h
@@ -1599,10 +1599,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/delta/Geeetech/G2S/Configuration_adv.h b/config/examples/delta/Geeetech/G2S/Configuration_adv.h
index eab0be5799..38caaffa4c 100644
--- a/config/examples/delta/Geeetech/G2S/Configuration_adv.h
+++ b/config/examples/delta/Geeetech/G2S/Configuration_adv.h
@@ -1599,10 +1599,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h b/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h
index eab0be5799..38caaffa4c 100644
--- a/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h
+++ b/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h
@@ -1599,10 +1599,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h
index d605cbba74..9c03c5046b 100644
--- a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h	
+++ b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h	
@@ -1599,10 +1599,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/delta/MKS/SBASE/Configuration_adv.h b/config/examples/delta/MKS/SBASE/Configuration_adv.h
index fcd8467afa..e857bdcb83 100644
--- a/config/examples/delta/MKS/SBASE/Configuration_adv.h
+++ b/config/examples/delta/MKS/SBASE/Configuration_adv.h
@@ -1599,10 +1599,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/delta/Tevo Little Monster/Configuration_adv.h b/config/examples/delta/Tevo Little Monster/Configuration_adv.h
index 2ac934a940..682c5e16cf 100644
--- a/config/examples/delta/Tevo Little Monster/Configuration_adv.h	
+++ b/config/examples/delta/Tevo Little Monster/Configuration_adv.h	
@@ -1599,10 +1599,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/delta/generic/Configuration_adv.h b/config/examples/delta/generic/Configuration_adv.h
index bd12d0ed66..3855499e64 100644
--- a/config/examples/delta/generic/Configuration_adv.h
+++ b/config/examples/delta/generic/Configuration_adv.h
@@ -1599,10 +1599,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/delta/kossel_clear/Configuration_adv.h b/config/examples/delta/kossel_clear/Configuration_adv.h
index ad7d2e4cd3..e79cd2742e 100644
--- a/config/examples/delta/kossel_clear/Configuration_adv.h
+++ b/config/examples/delta/kossel_clear/Configuration_adv.h
@@ -1599,10 +1599,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/delta/kossel_mini/Configuration_adv.h b/config/examples/delta/kossel_mini/Configuration_adv.h
index bd12d0ed66..3855499e64 100644
--- a/config/examples/delta/kossel_mini/Configuration_adv.h
+++ b/config/examples/delta/kossel_mini/Configuration_adv.h
@@ -1599,10 +1599,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/delta/kossel_xl/Configuration_adv.h b/config/examples/delta/kossel_xl/Configuration_adv.h
index 402a758c49..d1ab91503c 100644
--- a/config/examples/delta/kossel_xl/Configuration_adv.h
+++ b/config/examples/delta/kossel_xl/Configuration_adv.h
@@ -1599,10 +1599,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/config/examples/gCreate/gMax1.5+/Configuration_adv.h
index cac3c76b4e..097d22b36f 100644
--- a/config/examples/gCreate/gMax1.5+/Configuration_adv.h
+++ b/config/examples/gCreate/gMax1.5+/Configuration_adv.h
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/makibox/Configuration_adv.h b/config/examples/makibox/Configuration_adv.h
index f7cf869258..ae5f7df419 100644
--- a/config/examples/makibox/Configuration_adv.h
+++ b/config/examples/makibox/Configuration_adv.h
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/tvrrug/Round2/Configuration_adv.h b/config/examples/tvrrug/Round2/Configuration_adv.h
index 25c809bf45..99dd7f0008 100644
--- a/config/examples/tvrrug/Round2/Configuration_adv.h
+++ b/config/examples/tvrrug/Round2/Configuration_adv.h
@@ -1597,10 +1597,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }
 
diff --git a/config/examples/wt150/Configuration_adv.h b/config/examples/wt150/Configuration_adv.h
index ea8fdc5f81..02876674b1 100644
--- a/config/examples/wt150/Configuration_adv.h
+++ b/config/examples/wt150/Configuration_adv.h
@@ -1598,10 +1598,6 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
-    // Max temperature that can be reached by heated bed.
-    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
-
     // Park position to wait for probe cooldown
     #define PTC_PARK_POS   { 0, 0, 100 }