📝 Add sections for schema

MarlinFirmware/Marlin#24528
2025-07-07 15:07:34 -06:00 · 2022-08-02 01:59:56 -05:00 · 2022-08-02 01:59:56 -05:00 · 48ffab7d02
commit 48ffab7d02
parent c0e4a07015
599 changed files with 40103 additions and 8744 deletions
--- a/config/examples/WASP/PowerWASP/Configuration_adv.h
+++ b/config/examples/WASP/PowerWASP/Configuration_adv.h
@ -32,6 +32,24 @@
 */
 #define CONFIGURATION_ADV_H_VERSION 02010100

+// @section develop
+
+/**
+ * Configuration Dump to JSON and INI format
+ *
+ * Dump the configuration as part of the build. (See signature.py)
+ * Output files are saved with the build (e.g., .pio/build/mega2560).
+ *
+ * See `build_all_examples --ini` as an example of config.ini archiving.
+ *
+ *  1 = marlin_config.json - Dictionary containing the configuration.
+ *      This file is also generated for CONFIGURATION_EMBEDDING.
+ *  2 = config.ini - File format for PlatformIO preprocessing.
+ *  3 = schema.json - The entire configuration schema. (13 = pattern groups)
+ *  4 = schema.yml - The entire configuration schema.
+ */
+//#define CONFIG_DUMP   // :[1:'JSON', 2:'config.ini', 3:'schema.json', 4:'schema.yml']
+
 //===========================================================================
 //============================= Thermal Settings ============================
 //===========================================================================
@ -2558,6 +2576,8 @@
  #endif
 #endif // HAS_MULTI_EXTRUDER

+// @section advanced pause
+
 /**
 * Advanced Pause for Filament Change
 *  - Adds the G-code M600 Filament Change to initiate a filament change.
@ -2616,13 +2636,12 @@
  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS         // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
 #endif

-// @section tmc
-
 /**
 * TMC26X Stepper Driver options
 *
 * The TMC26XStepper library is required for this stepper driver.
 * https://github.com/trinamic/TMC26XStepper
+ * @section tmc/tmc26x
 */
 #if HAS_DRIVER(TMC26X)

@ -2760,8 +2779,6 @@

 #endif // TMC26X

-// @section tmc_smart
-
 /**
 * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode
 * connect your SPI pins to the hardware SPI interface on your board and define
@ -2777,6 +2794,7 @@
 *
 * TMCStepper library is required to use TMC stepper drivers.
 * https://github.com/teemuatlut/TMCStepper
+ * @section tmc/config
 */
 #if HAS_TRINAMIC_CONFIG

@ -3000,6 +3018,8 @@
    //#define E7_HOLD_MULTIPLIER 0.5
  #endif

+  // @section tmc/spi
+
  /**
   * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here.
   * The default pins can be found in your board's pins file.
@ -3037,6 +3057,8 @@
  //#define TMC_SW_MISO       -1
  //#define TMC_SW_SCK        -1

+  // @section tmc/serial
+
  /**
   * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
   * Set the address using jumpers on pins MS1 and MS2.
@ -3072,6 +3094,8 @@
  //#define E6_SLAVE_ADDRESS 0
  //#define E7_SLAVE_ADDRESS 0

+  // @section tmc/smart
+
  /**
   * Software enable
   *
@ -3080,6 +3104,8 @@
   */
  //#define SOFTWARE_DRIVER_ENABLE

+  // @section tmc/stealthchop
+
  /**
   * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only
   * Use Trinamic's ultra quiet stepping mode.
@ -3134,6 +3160,8 @@
  //#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
  //#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E

+  // @section tmc/status
+
  /**
   * Monitor Trinamic drivers
   * for error conditions like overtemperature and short to ground.
@ -3153,6 +3181,8 @@
    #define STOP_ON_ERROR
  #endif

+  // @section tmc/hybrid
+
  /**
   * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only
   * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD.
@ -3209,6 +3239,7 @@
   * homing and adds a guard period for endstop triggering.
   *
   * Comment *_STALL_SENSITIVITY to disable sensorless homing for that axis.
+   * @section tmc/stallguard
   */
  //#define SENSORLESS_HOMING // StallGuard capable drivers only

@ -3232,6 +3263,8 @@
    //#define IMPROVE_HOMING_RELIABILITY
  #endif

+  // @section tmc/config
+
  /**
   * TMC Homing stepper phase.
   *
@ -3312,7 +3345,7 @@
  #define I2C_SLAVE_ADDRESS  0  // Set a value from 8 to 127 to act as a slave
 #endif

-// @section extras
+// @section photo

 /**
 * Photo G-code
@ -3355,6 +3388,8 @@
  #endif
 #endif

+// @section cnc
+
 /**
 * Spindle & Laser control
 *
@ -3559,6 +3594,8 @@
  #define COOLANT_FLOOD_INVERT false  // Set "true" if the on/off function is reversed
 #endif

+// @section filament width
+
 /**
 * Filament Width Sensor
 *
@ -3592,6 +3629,8 @@
  //#define FILAMENT_LCD_DISPLAY
 #endif

+// @section power
+
 /**
 * Power Monitor
 * Monitor voltage (V) and/or current (A), and -when possible- power (W)
@ -3615,6 +3654,8 @@
  #define POWER_MONITOR_VOLTAGE_OFFSET  0         // Offset (in volts) applied to the calculated voltage
 #endif

+// @section safety
+
 /**
 * Stepper Driver Anti-SNAFU Protection
 *
@ -3624,6 +3665,8 @@
 */
 //#define DISABLE_DRIVER_SAFE_POWER_PROTECT

+// @section cnc
+
 /**
 * CNC Coordinate Systems
 *
@ -3640,6 +3683,8 @@
 */
 //#define CNC_DRILLING_CYCLE

+// @section reporting
+
 /**
 * Auto-report fan speed with M123 S<seconds>
 * Requires fans with tachometer pins
@ -3667,6 +3712,8 @@
  //#define M115_GEOMETRY_REPORT
 #endif

+// @section security
+
 /**
 * Expected Printer Check
 * Add the M16 G-code to compare a string to the MACHINE_NAME.
@ -3674,6 +3721,8 @@
 */
 //#define EXPECTED_PRINTER_CHECK

+// @section volumetrics
+
 /**
 * Disable all Volumetric extrusion options
 */
@ -3702,14 +3751,7 @@
  #endif
 #endif

-/**
- * Enable this option for a leaner build of Marlin that removes all
- * workspace offsets, simplifying coordinate transformations, leveling, etc.
- *
- *  - M206 and M428 are disabled.
- *  - G92 will revert to its behavior from Marlin 1.0.
- */
-//#define NO_WORKSPACE_OFFSETS
+// @section reporting

 // Extra options for the M114 "Current Position" report
 //#define M114_DETAIL         // Use 'M114` for details to check planner calculations
@ -3718,6 +3760,8 @@

 //#define REPORT_FAN_CHANGE   // Report the new fan speed when changed by M106 (and others)

+// @section gcode
+
 /**
 * Spend 28 bytes of SRAM to optimize the G-code parser
 */
@ -3735,6 +3779,15 @@

 //#define REPETIER_GCODE_M360     // Add commands originally from Repetier FW

+/**
+ * Enable this option for a leaner build of Marlin that removes all
+ * workspace offsets, simplifying coordinate transformations, leveling, etc.
+ *
+ *  - M206 and M428 are disabled.
+ *  - G92 will revert to its behavior from Marlin 1.0.
+ */
+//#define NO_WORKSPACE_OFFSETS
+
 /**
 * CNC G-code options
 * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.
@ -3751,6 +3804,8 @@
 #endif
 //#define G0_ANGULAR_FEEDRATE 2700 // (°/min)

+// @section gcode
+
 /**
 * Startup commands
 *
@ -3775,6 +3830,8 @@
 * Up to 25 may be defined, but the actual number is LCD-dependent.
 */

+// @section custom main menu
+
 // Custom Menu: Main Menu
 //#define CUSTOM_MENU_MAIN
 #if ENABLED(CUSTOM_MENU_MAIN)
@ -3805,6 +3862,8 @@
  //#define MAIN_MENU_ITEM_5_CONFIRM
 #endif

+// @section custom config menu
+
 // Custom Menu: Configuration Menu
 //#define CUSTOM_MENU_CONFIG
 #if ENABLED(CUSTOM_MENU_CONFIG)
@ -3835,6 +3894,8 @@
  //#define CONFIG_MENU_ITEM_5_CONFIRM
 #endif

+// @section custom buttons
+
 /**
 * User-defined buttons to run custom G-code.
 * Up to 25 may be defined.
@ -3866,6 +3927,8 @@
  #endif
 #endif

+// @section host
+
 /**
 * Host Action Commands
 *
@ -3891,6 +3954,8 @@
  //#define HOST_SHUTDOWN_MENU_ITEM       // Add a menu item that tells the host to shut down
 #endif

+// @section extras
+
 /**
 * Cancel Objects
 *
@ -3912,6 +3977,7 @@
 * Alternative Supplier: https://reliabuild3d.com/
 *
 * Reliabuild encoders have been modified to improve reliability.
+ * @section i2c encoders
 */

 //#define I2C_POSITION_ENCODERS
@ -3983,6 +4049,7 @@

 /**
 * Analog Joystick(s)
+ * @section joystick
 */
 //#define JOYSTICK
 #if ENABLED(JOYSTICK)
@ -4007,6 +4074,7 @@
 * Modern replacement for the Prusa TMC_Z_CALIBRATION.
 * Adds capability to work with any adjustable current drivers.
 * Implemented as G34 because M915 is deprecated.
+ * @section calibrate
 */
 //#define MECHANICAL_GANTRY_CALIBRATION
 #if ENABLED(MECHANICAL_GANTRY_CALIBRATION)
@ -4024,6 +4092,7 @@
 /**
 * Instant freeze / unfreeze functionality
 * Potentially useful for emergency stop that allows being resumed.
+ * @section interface
 */
 //#define FREEZE_FEATURE
 #if ENABLED(FREEZE_FEATURE)
@ -4036,6 +4105,7 @@
 *
 * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display.
 * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage.
+ * @section debug matrix
 */
 //#define MAX7219_DEBUG
 #if ENABLED(MAX7219_DEBUG)
@ -4074,6 +4144,7 @@
 * Support for Synchronized Z moves when used with NanoDLP. G0/G1 axis moves will
 * output a "Z_move_comp" string to enable synchronization with DLP projector exposure.
 * This feature allows you to use [[WaitForDoneMessage]] instead of M400 commands.
+ * @section nanodlp
 */
 //#define NANODLP_Z_SYNC
 #if ENABLED(NANODLP_Z_SYNC)
@ -4082,6 +4153,7 @@

 /**
 * Ethernet. Use M552 to enable and set the IP address.
+ * @section network
 */
 #if HAS_ETHERNET
  #define MAC_ADDRESS { 0xDE, 0xAD, 0xBE, 0xEF, 0xF0, 0x0D }  // A MAC address unique to your network
@ -4109,6 +4181,8 @@
  //#include "Configuration_Secure.h" // External file with WiFi SSID / Password
 #endif

+// @section multi-material
+
 /**
 * Průša Multi-Material Unit (MMU)
 * Enable in Configuration.h
@ -4216,6 +4290,7 @@

 /**
 * Advanced Print Counter settings
+ * @section stats
 */
 #if ENABLED(PRINTCOUNTER)
  #define SERVICE_WARNING_BUZZES  3