mirror of
https://github.com/MarlinFirmware/Configurations.git
synced 2025-07-15 02:37:53 -06:00
Scott Lahteine
parent
c0e4a07015
commit
48ffab7d02
599 changed files with 40103 additions and 8744 deletions
|
|
@ -114,6 +114,7 @@
|
|||
* :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
|
||||
*/
|
||||
#define BAUDRATE 250000
|
||||
|
||||
//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate
|
||||
|
||||
/**
|
||||
|
|
@ -122,7 +123,7 @@
|
|||
* :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
//#define SERIAL_PORT_2 -1
|
||||
//#define BAUDRATE_2 250000 // Enable to override BAUDRATE
|
||||
//#define BAUDRATE_2 250000 // :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] Enable to override BAUDRATE
|
||||
|
||||
/**
|
||||
* Select a third serial port on the board to use for communication with the host.
|
||||
|
|
@ -130,7 +131,7 @@
|
|||
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
//#define SERIAL_PORT_3 1
|
||||
//#define BAUDRATE_3 250000 // Enable to override BAUDRATE
|
||||
//#define BAUDRATE_3 250000 // :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] Enable to override BAUDRATE
|
||||
|
||||
// Enable the Bluetooth serial interface on AT90USB devices
|
||||
//#define BLUETOOTH
|
||||
|
|
@ -389,7 +390,7 @@
|
|||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
// @section psu control
|
||||
|
||||
/**
|
||||
* Power Supply Control
|
||||
|
|
@ -625,6 +626,8 @@
|
|||
//============================= PID Settings ================================
|
||||
//===========================================================================
|
||||
|
||||
// @section hotend temp
|
||||
|
||||
// Enable PIDTEMP for PID control or MPCTEMP for Predictive Model.
|
||||
// temperature control. Disable both for bang-bang heating.
|
||||
#define PIDTEMP // See the PID Tuning Guide at https://reprap.org/wiki/PID_Tuning
|
||||
|
|
@ -635,7 +638,8 @@
|
|||
#define PID_K1 0.95 // Smoothing factor within any PID loop
|
||||
|
||||
#if ENABLED(PIDTEMP)
|
||||
//#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders)
|
||||
//#define PID_DEBUG // Print PID debug data to the serial port. Use 'M303 D' to toggle activation.
|
||||
//#define PID_PARAMS_PER_HOTEND // Use separate PID parameters for each extruder (useful for mismatched extruders)
|
||||
// Set/get with G-code: M301 E[extruder number, 0-2]
|
||||
|
||||
// A10M [@thinkyhead]
|
||||
|
|
@ -658,6 +662,7 @@
|
|||
* Use a physical model of the hotend to control temperature. When configured correctly
|
||||
* this gives better responsiveness and stability than PID and it also removes the need
|
||||
* for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model.
|
||||
* @section mpctemp
|
||||
*/
|
||||
#if ENABLED(MPCTEMP)
|
||||
//#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash)
|
||||
|
|
@ -725,7 +730,7 @@
|
|||
|
||||
#if ENABLED(PIDTEMPBED)
|
||||
//#define MIN_BED_POWER 0
|
||||
//#define PID_BED_DEBUG // Sends debug data to the serial port.
|
||||
//#define PID_BED_DEBUG // Print Bed PID debug data to the serial port.
|
||||
|
||||
// MeCreator2 generated by Autotune
|
||||
#define DEFAULT_bedKp 182.46 // 175.68 189.95
|
||||
|
|
@ -752,6 +757,7 @@
|
|||
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 200W
|
||||
* heater. If your configuration is significantly different than this and you don't understand
|
||||
* the issues involved, don't use chamber PID until someone else verifies that your hardware works.
|
||||
* @section chamber temp
|
||||
*/
|
||||
//#define PIDTEMPCHAMBER
|
||||
//#define CHAMBER_LIMIT_SWITCHING
|
||||
|
|
@ -766,7 +772,7 @@
|
|||
|
||||
#if ENABLED(PIDTEMPCHAMBER)
|
||||
#define MIN_CHAMBER_POWER 0
|
||||
//#define PID_CHAMBER_DEBUG // Sends debug data to the serial port.
|
||||
//#define PID_CHAMBER_DEBUG // Print Chamber PID debug data to the serial port.
|
||||
|
||||
// Lasko "MyHeat Personal Heater" (200w) modified with a Fotek SSR-10DA to control only the heating element
|
||||
// and placed inside the small Creality printer enclosure tent.
|
||||
|
|
@ -780,7 +786,6 @@
|
|||
#endif // PIDTEMPCHAMBER
|
||||
|
||||
#if ANY(PIDTEMP, PIDTEMPBED, PIDTEMPCHAMBER)
|
||||
//#define PID_DEBUG // Sends debug data to the serial port. Use 'M303 D' to toggle activation.
|
||||
//#define PID_OPENLOOP // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX
|
||||
//#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay
|
||||
#define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature
|
||||
|
|
@ -790,7 +795,7 @@
|
|||
#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of flash)
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
// @section safety
|
||||
|
||||
/**
|
||||
* Prevent extrusion if the temperature is below EXTRUDE_MINTEMP.
|
||||
|
|
@ -858,6 +863,8 @@
|
|||
#define POLAR_SEGMENTS_PER_SECOND 5
|
||||
#endif
|
||||
|
||||
// @section delta
|
||||
|
||||
// Enable for DELTA kinematics and configure below
|
||||
//#define DELTA
|
||||
#if ENABLED(DELTA)
|
||||
|
|
@ -917,6 +924,8 @@
|
|||
//#define DELTA_DIAGONAL_ROD_TRIM_TOWER { 0.0, 0.0, 0.0 }
|
||||
#endif
|
||||
|
||||
// @section scara
|
||||
|
||||
/**
|
||||
* MORGAN_SCARA was developed by QHARLEY in South Africa in 2012-2013.
|
||||
* Implemented and slightly reworked by JCERNY in June, 2014.
|
||||
|
|
@ -960,6 +969,8 @@
|
|||
|
||||
#endif
|
||||
|
||||
// @section tpara
|
||||
|
||||
// Enable for TPARA kinematics and configure below
|
||||
//#define AXEL_TPARA
|
||||
#if ENABLED(AXEL_TPARA)
|
||||
|
|
@ -986,6 +997,8 @@
|
|||
#define PSI_HOMING_OFFSET 0
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
|
|
@ -997,7 +1010,7 @@
|
|||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
||||
// @section homing
|
||||
// @section endstops
|
||||
|
||||
// Specify here all the endstop connectors that are connected to any endstop or probe.
|
||||
// Almost all printers will be using one per axis. Probes will use one or more of the
|
||||
|
|
@ -1665,7 +1678,7 @@
|
|||
//#define V_HOME_DIR -1
|
||||
//#define W_HOME_DIR -1
|
||||
|
||||
// @section machine
|
||||
// @section geometry
|
||||
|
||||
// The size of the printable area
|
||||
#define X_BED_SIZE 230
|
||||
|
|
@ -2127,7 +2140,7 @@
|
|||
//============================= Additional Features ===========================
|
||||
//=============================================================================
|
||||
|
||||
// @section extras
|
||||
// @section eeprom
|
||||
|
||||
/**
|
||||
* EEPROM
|
||||
|
|
@ -2147,6 +2160,8 @@
|
|||
//#define EEPROM_INIT_NOW // Init EEPROM on first boot after a new build.
|
||||
#endif
|
||||
|
||||
// @section host
|
||||
|
||||
//
|
||||
// Host Keepalive
|
||||
//
|
||||
|
|
@ -2157,6 +2172,8 @@
|
|||
#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113.
|
||||
#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating
|
||||
|
||||
// @section units
|
||||
|
||||
//
|
||||
// G20/G21 Inch mode support
|
||||
//
|
||||
|
|
@ -2184,6 +2201,8 @@
|
|||
#define PREHEAT_2_TEMP_CHAMBER 35
|
||||
#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
|
||||
|
||||
// @section motion
|
||||
|
||||
/**
|
||||
* Nozzle Park
|
||||
*
|
||||
|
|
@ -2282,6 +2301,8 @@
|
|||
|
||||
#endif
|
||||
|
||||
// @section host
|
||||
|
||||
/**
|
||||
* Print Job Timer
|
||||
*
|
||||
|
|
@ -2308,6 +2329,8 @@
|
|||
*/
|
||||
#define PRINTJOB_TIMER_AUTOSTART
|
||||
|
||||
// @section stats
|
||||
|
||||
/**
|
||||
* Print Counter
|
||||
*
|
||||
|
|
@ -2325,6 +2348,8 @@
|
|||
#define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print
|
||||
#endif
|
||||
|
||||
// @section security
|
||||
|
||||
/**
|
||||
* Password
|
||||
*
|
||||
|
|
@ -2360,7 +2385,7 @@
|
|||
//============================= LCD and SD support ============================
|
||||
//=============================================================================
|
||||
|
||||
// @section lcd
|
||||
// @section interface
|
||||
|
||||
/**
|
||||
* LCD LANGUAGE
|
||||
|
|
@ -2516,6 +2541,7 @@
|
|||
//======================== LCD / Controller Selection =========================
|
||||
//======================== (Character-based LCDs) =========================
|
||||
//=============================================================================
|
||||
// @section lcd
|
||||
|
||||
//
|
||||
// RepRapDiscount Smart Controller.
|
||||
|
|
@ -3161,7 +3187,7 @@
|
|||
//=============================== Extra Features ==============================
|
||||
//=============================================================================
|
||||
|
||||
// @section extras
|
||||
// @section fans
|
||||
|
||||
// Set number of user-controlled fans. Disable to use all board-defined fans.
|
||||
// :[1,2,3,4,5,6,7,8]
|
||||
|
|
@ -3185,14 +3211,18 @@
|
|||
// duty cycle is attained.
|
||||
//#define SOFT_PWM_DITHER
|
||||
|
||||
// @section extras
|
||||
|
||||
// Support for the BariCUDA Paste Extruder
|
||||
//#define BARICUDA
|
||||
|
||||
// @section lights
|
||||
|
||||
// Temperature status LEDs that display the hotend and bed temperature.
|
||||
// If all hotends, bed temperature, and target temperature are under 54C
|
||||
// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis)
|
||||
//#define TEMP_STAT_LEDS
|
||||
|
||||
// Support for the BariCUDA Paste Extruder
|
||||
//#define BARICUDA
|
||||
|
||||
// Support for BlinkM/CyzRgb
|
||||
//#define BLINKM
|
||||
|
||||
|
|
@ -3278,6 +3308,8 @@
|
|||
#define PRINTER_EVENT_LEDS
|
||||
#endif
|
||||
|
||||
// @section servos
|
||||
|
||||
/**
|
||||
* Number of servos
|
||||
*
|
||||
|
|
|
|||
|
|
@ -32,6 +32,24 @@
|
|||
*/
|
||||
#define CONFIGURATION_ADV_H_VERSION 02010100
|
||||
|
||||
// @section develop
|
||||
|
||||
/**
|
||||
* Configuration Dump to JSON and INI format
|
||||
*
|
||||
* Dump the configuration as part of the build. (See signature.py)
|
||||
* Output files are saved with the build (e.g., .pio/build/mega2560).
|
||||
*
|
||||
* See `build_all_examples --ini` as an example of config.ini archiving.
|
||||
*
|
||||
* 1 = marlin_config.json - Dictionary containing the configuration.
|
||||
* This file is also generated for CONFIGURATION_EMBEDDING.
|
||||
* 2 = config.ini - File format for PlatformIO preprocessing.
|
||||
* 3 = schema.json - The entire configuration schema. (13 = pattern groups)
|
||||
* 4 = schema.yml - The entire configuration schema.
|
||||
*/
|
||||
//#define CONFIG_DUMP // :[1:'JSON', 2:'config.ini', 3:'schema.json', 4:'schema.yml']
|
||||
|
||||
//===========================================================================
|
||||
//============================= Thermal Settings ============================
|
||||
//===========================================================================
|
||||
|
|
@ -2558,6 +2576,8 @@
|
|||
#endif
|
||||
#endif // HAS_MULTI_EXTRUDER
|
||||
|
||||
// @section advanced pause
|
||||
|
||||
/**
|
||||
* Advanced Pause for Filament Change
|
||||
* - Adds the G-code M600 Filament Change to initiate a filament change.
|
||||
|
|
@ -2616,13 +2636,12 @@
|
|||
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
|
||||
#endif
|
||||
|
||||
// @section tmc
|
||||
|
||||
/**
|
||||
* TMC26X Stepper Driver options
|
||||
*
|
||||
* The TMC26XStepper library is required for this stepper driver.
|
||||
* https://github.com/trinamic/TMC26XStepper
|
||||
* @section tmc/tmc26x
|
||||
*/
|
||||
#if HAS_DRIVER(TMC26X)
|
||||
|
||||
|
|
@ -2760,8 +2779,6 @@
|
|||
|
||||
#endif // TMC26X
|
||||
|
||||
// @section tmc_smart
|
||||
|
||||
/**
|
||||
* To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode
|
||||
* connect your SPI pins to the hardware SPI interface on your board and define
|
||||
|
|
@ -2777,6 +2794,7 @@
|
|||
*
|
||||
* TMCStepper library is required to use TMC stepper drivers.
|
||||
* https://github.com/teemuatlut/TMCStepper
|
||||
* @section tmc/config
|
||||
*/
|
||||
#if HAS_TRINAMIC_CONFIG
|
||||
|
||||
|
|
@ -3000,6 +3018,8 @@
|
|||
//#define E7_HOLD_MULTIPLIER 0.5
|
||||
#endif
|
||||
|
||||
// @section tmc/spi
|
||||
|
||||
/**
|
||||
* Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here.
|
||||
* The default pins can be found in your board's pins file.
|
||||
|
|
@ -3037,6 +3057,8 @@
|
|||
//#define TMC_SW_MISO -1
|
||||
//#define TMC_SW_SCK -1
|
||||
|
||||
// @section tmc/serial
|
||||
|
||||
/**
|
||||
* Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
|
||||
* Set the address using jumpers on pins MS1 and MS2.
|
||||
|
|
@ -3072,6 +3094,8 @@
|
|||
//#define E6_SLAVE_ADDRESS 0
|
||||
//#define E7_SLAVE_ADDRESS 0
|
||||
|
||||
// @section tmc/smart
|
||||
|
||||
/**
|
||||
* Software enable
|
||||
*
|
||||
|
|
@ -3080,6 +3104,8 @@
|
|||
*/
|
||||
//#define SOFTWARE_DRIVER_ENABLE
|
||||
|
||||
// @section tmc/stealthchop
|
||||
|
||||
/**
|
||||
* TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only
|
||||
* Use Trinamic's ultra quiet stepping mode.
|
||||
|
|
@ -3134,6 +3160,8 @@
|
|||
//#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
|
||||
//#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
|
||||
|
||||
// @section tmc/status
|
||||
|
||||
/**
|
||||
* Monitor Trinamic drivers
|
||||
* for error conditions like overtemperature and short to ground.
|
||||
|
|
@ -3153,6 +3181,8 @@
|
|||
#define STOP_ON_ERROR
|
||||
#endif
|
||||
|
||||
// @section tmc/hybrid
|
||||
|
||||
/**
|
||||
* TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only
|
||||
* The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD.
|
||||
|
|
@ -3209,6 +3239,7 @@
|
|||
* homing and adds a guard period for endstop triggering.
|
||||
*
|
||||
* Comment *_STALL_SENSITIVITY to disable sensorless homing for that axis.
|
||||
* @section tmc/stallguard
|
||||
*/
|
||||
//#define SENSORLESS_HOMING // StallGuard capable drivers only
|
||||
|
||||
|
|
@ -3232,6 +3263,8 @@
|
|||
//#define IMPROVE_HOMING_RELIABILITY
|
||||
#endif
|
||||
|
||||
// @section tmc/config
|
||||
|
||||
/**
|
||||
* TMC Homing stepper phase.
|
||||
*
|
||||
|
|
@ -3312,7 +3345,7 @@
|
|||
#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave
|
||||
#endif
|
||||
|
||||
// @section extras
|
||||
// @section photo
|
||||
|
||||
/**
|
||||
* Photo G-code
|
||||
|
|
@ -3355,6 +3388,8 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
// @section cnc
|
||||
|
||||
/**
|
||||
* Spindle & Laser control
|
||||
*
|
||||
|
|
@ -3559,6 +3594,8 @@
|
|||
#define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
|
||||
#endif
|
||||
|
||||
// @section filament width
|
||||
|
||||
/**
|
||||
* Filament Width Sensor
|
||||
*
|
||||
|
|
@ -3592,6 +3629,8 @@
|
|||
//#define FILAMENT_LCD_DISPLAY
|
||||
#endif
|
||||
|
||||
// @section power
|
||||
|
||||
/**
|
||||
* Power Monitor
|
||||
* Monitor voltage (V) and/or current (A), and -when possible- power (W)
|
||||
|
|
@ -3615,6 +3654,8 @@
|
|||
#define POWER_MONITOR_VOLTAGE_OFFSET 0 // Offset (in volts) applied to the calculated voltage
|
||||
#endif
|
||||
|
||||
// @section safety
|
||||
|
||||
/**
|
||||
* Stepper Driver Anti-SNAFU Protection
|
||||
*
|
||||
|
|
@ -3624,6 +3665,8 @@
|
|||
*/
|
||||
//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
|
||||
|
||||
// @section cnc
|
||||
|
||||
/**
|
||||
* CNC Coordinate Systems
|
||||
*
|
||||
|
|
@ -3640,6 +3683,8 @@
|
|||
*/
|
||||
//#define CNC_DRILLING_CYCLE
|
||||
|
||||
// @section reporting
|
||||
|
||||
/**
|
||||
* Auto-report fan speed with M123 S<seconds>
|
||||
* Requires fans with tachometer pins
|
||||
|
|
@ -3667,6 +3712,8 @@
|
|||
//#define M115_GEOMETRY_REPORT
|
||||
#endif
|
||||
|
||||
// @section security
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
|
|
@ -3674,6 +3721,8 @@
|
|||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
// @section volumetrics
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
|
|
@ -3702,14 +3751,7 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Enable this option for a leaner build of Marlin that removes all
|
||||
* workspace offsets, simplifying coordinate transformations, leveling, etc.
|
||||
*
|
||||
* - M206 and M428 are disabled.
|
||||
* - G92 will revert to its behavior from Marlin 1.0.
|
||||
*/
|
||||
//#define NO_WORKSPACE_OFFSETS
|
||||
// @section reporting
|
||||
|
||||
// Extra options for the M114 "Current Position" report
|
||||
//#define M114_DETAIL // Use 'M114` for details to check planner calculations
|
||||
|
|
@ -3718,6 +3760,8 @@
|
|||
|
||||
//#define REPORT_FAN_CHANGE // Report the new fan speed when changed by M106 (and others)
|
||||
|
||||
// @section gcode
|
||||
|
||||
/**
|
||||
* Spend 28 bytes of SRAM to optimize the G-code parser
|
||||
*/
|
||||
|
|
@ -3735,6 +3779,15 @@
|
|||
|
||||
//#define REPETIER_GCODE_M360 // Add commands originally from Repetier FW
|
||||
|
||||
/**
|
||||
* Enable this option for a leaner build of Marlin that removes all
|
||||
* workspace offsets, simplifying coordinate transformations, leveling, etc.
|
||||
*
|
||||
* - M206 and M428 are disabled.
|
||||
* - G92 will revert to its behavior from Marlin 1.0.
|
||||
*/
|
||||
//#define NO_WORKSPACE_OFFSETS
|
||||
|
||||
/**
|
||||
* CNC G-code options
|
||||
* Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.
|
||||
|
|
@ -3751,6 +3804,8 @@
|
|||
#endif
|
||||
//#define G0_ANGULAR_FEEDRATE 2700 // (°/min)
|
||||
|
||||
// @section gcode
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
|
|
@ -3775,6 +3830,8 @@
|
|||
* Up to 25 may be defined, but the actual number is LCD-dependent.
|
||||
*/
|
||||
|
||||
// @section custom main menu
|
||||
|
||||
// Custom Menu: Main Menu
|
||||
//#define CUSTOM_MENU_MAIN
|
||||
#if ENABLED(CUSTOM_MENU_MAIN)
|
||||
|
|
@ -3805,6 +3862,8 @@
|
|||
//#define MAIN_MENU_ITEM_5_CONFIRM
|
||||
#endif
|
||||
|
||||
// @section custom config menu
|
||||
|
||||
// Custom Menu: Configuration Menu
|
||||
//#define CUSTOM_MENU_CONFIG
|
||||
#if ENABLED(CUSTOM_MENU_CONFIG)
|
||||
|
|
@ -3835,6 +3894,8 @@
|
|||
//#define CONFIG_MENU_ITEM_5_CONFIRM
|
||||
#endif
|
||||
|
||||
// @section custom buttons
|
||||
|
||||
/**
|
||||
* User-defined buttons to run custom G-code.
|
||||
* Up to 25 may be defined.
|
||||
|
|
@ -3866,6 +3927,8 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
// @section host
|
||||
|
||||
/**
|
||||
* Host Action Commands
|
||||
*
|
||||
|
|
@ -3891,6 +3954,8 @@
|
|||
//#define HOST_SHUTDOWN_MENU_ITEM // Add a menu item that tells the host to shut down
|
||||
#endif
|
||||
|
||||
// @section extras
|
||||
|
||||
/**
|
||||
* Cancel Objects
|
||||
*
|
||||
|
|
@ -3912,6 +3977,7 @@
|
|||
* Alternative Supplier: https://reliabuild3d.com/
|
||||
*
|
||||
* Reliabuild encoders have been modified to improve reliability.
|
||||
* @section i2c encoders
|
||||
*/
|
||||
|
||||
//#define I2C_POSITION_ENCODERS
|
||||
|
|
@ -3983,6 +4049,7 @@
|
|||
|
||||
/**
|
||||
* Analog Joystick(s)
|
||||
* @section joystick
|
||||
*/
|
||||
//#define JOYSTICK
|
||||
#if ENABLED(JOYSTICK)
|
||||
|
|
@ -4007,6 +4074,7 @@
|
|||
* Modern replacement for the Prusa TMC_Z_CALIBRATION.
|
||||
* Adds capability to work with any adjustable current drivers.
|
||||
* Implemented as G34 because M915 is deprecated.
|
||||
* @section calibrate
|
||||
*/
|
||||
//#define MECHANICAL_GANTRY_CALIBRATION
|
||||
#if ENABLED(MECHANICAL_GANTRY_CALIBRATION)
|
||||
|
|
@ -4024,6 +4092,7 @@
|
|||
/**
|
||||
* Instant freeze / unfreeze functionality
|
||||
* Potentially useful for emergency stop that allows being resumed.
|
||||
* @section interface
|
||||
*/
|
||||
//#define FREEZE_FEATURE
|
||||
#if ENABLED(FREEZE_FEATURE)
|
||||
|
|
@ -4036,6 +4105,7 @@
|
|||
*
|
||||
* Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display.
|
||||
* Requires 3 signal wires. Some useful debug options are included to demonstrate its usage.
|
||||
* @section debug matrix
|
||||
*/
|
||||
//#define MAX7219_DEBUG
|
||||
#if ENABLED(MAX7219_DEBUG)
|
||||
|
|
@ -4074,6 +4144,7 @@
|
|||
* Support for Synchronized Z moves when used with NanoDLP. G0/G1 axis moves will
|
||||
* output a "Z_move_comp" string to enable synchronization with DLP projector exposure.
|
||||
* This feature allows you to use [[WaitForDoneMessage]] instead of M400 commands.
|
||||
* @section nanodlp
|
||||
*/
|
||||
//#define NANODLP_Z_SYNC
|
||||
#if ENABLED(NANODLP_Z_SYNC)
|
||||
|
|
@ -4082,6 +4153,7 @@
|
|||
|
||||
/**
|
||||
* Ethernet. Use M552 to enable and set the IP address.
|
||||
* @section network
|
||||
*/
|
||||
#if HAS_ETHERNET
|
||||
#define MAC_ADDRESS { 0xDE, 0xAD, 0xBE, 0xEF, 0xF0, 0x0D } // A MAC address unique to your network
|
||||
|
|
@ -4109,6 +4181,8 @@
|
|||
//#include "Configuration_Secure.h" // External file with WiFi SSID / Password
|
||||
#endif
|
||||
|
||||
// @section multi-material
|
||||
|
||||
/**
|
||||
* Průša Multi-Material Unit (MMU)
|
||||
* Enable in Configuration.h
|
||||
|
|
@ -4216,6 +4290,7 @@
|
|||
|
||||
/**
|
||||
* Advanced Print Counter settings
|
||||
* @section stats
|
||||
*/
|
||||
#if ENABLED(PRINTCOUNTER)
|
||||
#define SERVICE_WARNING_BUZZES 3
|
||||
|
|
|
|||
|
|
@ -114,6 +114,7 @@
|
|||
* :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
|
||||
*/
|
||||
#define BAUDRATE 250000
|
||||
|
||||
//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate
|
||||
|
||||
/**
|
||||
|
|
@ -122,7 +123,7 @@
|
|||
* :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
//#define SERIAL_PORT_2 -1
|
||||
//#define BAUDRATE_2 250000 // Enable to override BAUDRATE
|
||||
//#define BAUDRATE_2 250000 // :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] Enable to override BAUDRATE
|
||||
|
||||
/**
|
||||
* Select a third serial port on the board to use for communication with the host.
|
||||
|
|
@ -130,7 +131,7 @@
|
|||
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
//#define SERIAL_PORT_3 1
|
||||
//#define BAUDRATE_3 250000 // Enable to override BAUDRATE
|
||||
//#define BAUDRATE_3 250000 // :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] Enable to override BAUDRATE
|
||||
|
||||
// Enable the Bluetooth serial interface on AT90USB devices
|
||||
//#define BLUETOOTH
|
||||
|
|
@ -389,7 +390,7 @@
|
|||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
// @section psu control
|
||||
|
||||
/**
|
||||
* Power Supply Control
|
||||
|
|
@ -625,6 +626,8 @@
|
|||
//============================= PID Settings ================================
|
||||
//===========================================================================
|
||||
|
||||
// @section hotend temp
|
||||
|
||||
// Enable PIDTEMP for PID control or MPCTEMP for Predictive Model.
|
||||
// temperature control. Disable both for bang-bang heating.
|
||||
#define PIDTEMP // See the PID Tuning Guide at https://reprap.org/wiki/PID_Tuning
|
||||
|
|
@ -635,7 +638,8 @@
|
|||
#define PID_K1 0.95 // Smoothing factor within any PID loop
|
||||
|
||||
#if ENABLED(PIDTEMP)
|
||||
//#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders)
|
||||
//#define PID_DEBUG // Print PID debug data to the serial port. Use 'M303 D' to toggle activation.
|
||||
//#define PID_PARAMS_PER_HOTEND // Use separate PID parameters for each extruder (useful for mismatched extruders)
|
||||
// Set/get with G-code: M301 E[extruder number, 0-2]
|
||||
|
||||
#if ENABLED(PID_PARAMS_PER_HOTEND)
|
||||
|
|
@ -657,6 +661,7 @@
|
|||
* Use a physical model of the hotend to control temperature. When configured correctly
|
||||
* this gives better responsiveness and stability than PID and it also removes the need
|
||||
* for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model.
|
||||
* @section mpctemp
|
||||
*/
|
||||
#if ENABLED(MPCTEMP)
|
||||
//#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash)
|
||||
|
|
@ -724,7 +729,7 @@
|
|||
|
||||
#if ENABLED(PIDTEMPBED)
|
||||
//#define MIN_BED_POWER 0
|
||||
//#define PID_BED_DEBUG // Sends debug data to the serial port.
|
||||
//#define PID_BED_DEBUG // Print Bed PID debug data to the serial port.
|
||||
|
||||
// MeCreator2 generated by Autotune
|
||||
#define DEFAULT_bedKp 182.46 // 175.68 189.95
|
||||
|
|
@ -751,6 +756,7 @@
|
|||
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 200W
|
||||
* heater. If your configuration is significantly different than this and you don't understand
|
||||
* the issues involved, don't use chamber PID until someone else verifies that your hardware works.
|
||||
* @section chamber temp
|
||||
*/
|
||||
//#define PIDTEMPCHAMBER
|
||||
//#define CHAMBER_LIMIT_SWITCHING
|
||||
|
|
@ -765,7 +771,7 @@
|
|||
|
||||
#if ENABLED(PIDTEMPCHAMBER)
|
||||
#define MIN_CHAMBER_POWER 0
|
||||
//#define PID_CHAMBER_DEBUG // Sends debug data to the serial port.
|
||||
//#define PID_CHAMBER_DEBUG // Print Chamber PID debug data to the serial port.
|
||||
|
||||
// Lasko "MyHeat Personal Heater" (200w) modified with a Fotek SSR-10DA to control only the heating element
|
||||
// and placed inside the small Creality printer enclosure tent.
|
||||
|
|
@ -779,7 +785,6 @@
|
|||
#endif // PIDTEMPCHAMBER
|
||||
|
||||
#if ANY(PIDTEMP, PIDTEMPBED, PIDTEMPCHAMBER)
|
||||
//#define PID_DEBUG // Sends debug data to the serial port. Use 'M303 D' to toggle activation.
|
||||
//#define PID_OPENLOOP // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX
|
||||
//#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay
|
||||
#define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature
|
||||
|
|
@ -789,7 +794,7 @@
|
|||
//#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of flash)
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
// @section safety
|
||||
|
||||
/**
|
||||
* Prevent extrusion if the temperature is below EXTRUDE_MINTEMP.
|
||||
|
|
@ -857,6 +862,8 @@
|
|||
#define POLAR_SEGMENTS_PER_SECOND 5
|
||||
#endif
|
||||
|
||||
// @section delta
|
||||
|
||||
// Enable for DELTA kinematics and configure below
|
||||
//#define DELTA
|
||||
#if ENABLED(DELTA)
|
||||
|
|
@ -916,6 +923,8 @@
|
|||
//#define DELTA_DIAGONAL_ROD_TRIM_TOWER { 0.0, 0.0, 0.0 }
|
||||
#endif
|
||||
|
||||
// @section scara
|
||||
|
||||
/**
|
||||
* MORGAN_SCARA was developed by QHARLEY in South Africa in 2012-2013.
|
||||
* Implemented and slightly reworked by JCERNY in June, 2014.
|
||||
|
|
@ -959,6 +968,8 @@
|
|||
|
||||
#endif
|
||||
|
||||
// @section tpara
|
||||
|
||||
// Enable for TPARA kinematics and configure below
|
||||
//#define AXEL_TPARA
|
||||
#if ENABLED(AXEL_TPARA)
|
||||
|
|
@ -985,6 +996,8 @@
|
|||
#define PSI_HOMING_OFFSET 0
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
|
|
@ -996,7 +1009,7 @@
|
|||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
||||
// @section homing
|
||||
// @section endstops
|
||||
|
||||
// Specify here all the endstop connectors that are connected to any endstop or probe.
|
||||
// Almost all printers will be using one per axis. Probes will use one or more of the
|
||||
|
|
@ -1666,7 +1679,7 @@
|
|||
//#define V_HOME_DIR -1
|
||||
//#define W_HOME_DIR -1
|
||||
|
||||
// @section machine
|
||||
// @section geometry
|
||||
|
||||
// The size of the printable area
|
||||
#define X_BED_SIZE 220
|
||||
|
|
@ -2128,7 +2141,7 @@
|
|||
//============================= Additional Features ===========================
|
||||
//=============================================================================
|
||||
|
||||
// @section extras
|
||||
// @section eeprom
|
||||
|
||||
/**
|
||||
* EEPROM
|
||||
|
|
@ -2148,6 +2161,8 @@
|
|||
//#define EEPROM_INIT_NOW // Init EEPROM on first boot after a new build.
|
||||
#endif
|
||||
|
||||
// @section host
|
||||
|
||||
//
|
||||
// Host Keepalive
|
||||
//
|
||||
|
|
@ -2158,6 +2173,8 @@
|
|||
#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113.
|
||||
#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating
|
||||
|
||||
// @section units
|
||||
|
||||
//
|
||||
// G20/G21 Inch mode support
|
||||
//
|
||||
|
|
@ -2185,6 +2202,8 @@
|
|||
#define PREHEAT_2_TEMP_CHAMBER 35
|
||||
#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
|
||||
|
||||
// @section motion
|
||||
|
||||
/**
|
||||
* Nozzle Park
|
||||
*
|
||||
|
|
@ -2283,6 +2302,8 @@
|
|||
|
||||
#endif
|
||||
|
||||
// @section host
|
||||
|
||||
/**
|
||||
* Print Job Timer
|
||||
*
|
||||
|
|
@ -2309,6 +2330,8 @@
|
|||
*/
|
||||
#define PRINTJOB_TIMER_AUTOSTART
|
||||
|
||||
// @section stats
|
||||
|
||||
/**
|
||||
* Print Counter
|
||||
*
|
||||
|
|
@ -2326,6 +2349,8 @@
|
|||
#define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print
|
||||
#endif
|
||||
|
||||
// @section security
|
||||
|
||||
/**
|
||||
* Password
|
||||
*
|
||||
|
|
@ -2361,7 +2386,7 @@
|
|||
//============================= LCD and SD support ============================
|
||||
//=============================================================================
|
||||
|
||||
// @section lcd
|
||||
// @section interface
|
||||
|
||||
/**
|
||||
* LCD LANGUAGE
|
||||
|
|
@ -2517,6 +2542,7 @@
|
|||
//======================== LCD / Controller Selection =========================
|
||||
//======================== (Character-based LCDs) =========================
|
||||
//=============================================================================
|
||||
// @section lcd
|
||||
|
||||
//
|
||||
// RepRapDiscount Smart Controller.
|
||||
|
|
@ -3161,7 +3187,7 @@
|
|||
//=============================== Extra Features ==============================
|
||||
//=============================================================================
|
||||
|
||||
// @section extras
|
||||
// @section fans
|
||||
|
||||
// Set number of user-controlled fans. Disable to use all board-defined fans.
|
||||
// :[1,2,3,4,5,6,7,8]
|
||||
|
|
@ -3185,14 +3211,18 @@
|
|||
// duty cycle is attained.
|
||||
//#define SOFT_PWM_DITHER
|
||||
|
||||
// @section extras
|
||||
|
||||
// Support for the BariCUDA Paste Extruder
|
||||
//#define BARICUDA
|
||||
|
||||
// @section lights
|
||||
|
||||
// Temperature status LEDs that display the hotend and bed temperature.
|
||||
// If all hotends, bed temperature, and target temperature are under 54C
|
||||
// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis)
|
||||
//#define TEMP_STAT_LEDS
|
||||
|
||||
// Support for the BariCUDA Paste Extruder
|
||||
//#define BARICUDA
|
||||
|
||||
// Support for BlinkM/CyzRgb
|
||||
//#define BLINKM
|
||||
|
||||
|
|
@ -3278,6 +3308,8 @@
|
|||
#define PRINTER_EVENT_LEDS
|
||||
#endif
|
||||
|
||||
// @section servos
|
||||
|
||||
/**
|
||||
* Number of servos
|
||||
*
|
||||
|
|
|
|||
|
|
@ -32,6 +32,24 @@
|
|||
*/
|
||||
#define CONFIGURATION_ADV_H_VERSION 02010100
|
||||
|
||||
// @section develop
|
||||
|
||||
/**
|
||||
* Configuration Dump to JSON and INI format
|
||||
*
|
||||
* Dump the configuration as part of the build. (See signature.py)
|
||||
* Output files are saved with the build (e.g., .pio/build/mega2560).
|
||||
*
|
||||
* See `build_all_examples --ini` as an example of config.ini archiving.
|
||||
*
|
||||
* 1 = marlin_config.json - Dictionary containing the configuration.
|
||||
* This file is also generated for CONFIGURATION_EMBEDDING.
|
||||
* 2 = config.ini - File format for PlatformIO preprocessing.
|
||||
* 3 = schema.json - The entire configuration schema. (13 = pattern groups)
|
||||
* 4 = schema.yml - The entire configuration schema.
|
||||
*/
|
||||
//#define CONFIG_DUMP // :[1:'JSON', 2:'config.ini', 3:'schema.json', 4:'schema.yml']
|
||||
|
||||
//===========================================================================
|
||||
//============================= Thermal Settings ============================
|
||||
//===========================================================================
|
||||
|
|
@ -2558,6 +2576,8 @@
|
|||
#endif
|
||||
#endif // HAS_MULTI_EXTRUDER
|
||||
|
||||
// @section advanced pause
|
||||
|
||||
/**
|
||||
* Advanced Pause for Filament Change
|
||||
* - Adds the G-code M600 Filament Change to initiate a filament change.
|
||||
|
|
@ -2616,13 +2636,12 @@
|
|||
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
|
||||
#endif
|
||||
|
||||
// @section tmc
|
||||
|
||||
/**
|
||||
* TMC26X Stepper Driver options
|
||||
*
|
||||
* The TMC26XStepper library is required for this stepper driver.
|
||||
* https://github.com/trinamic/TMC26XStepper
|
||||
* @section tmc/tmc26x
|
||||
*/
|
||||
#if HAS_DRIVER(TMC26X)
|
||||
|
||||
|
|
@ -2760,8 +2779,6 @@
|
|||
|
||||
#endif // TMC26X
|
||||
|
||||
// @section tmc_smart
|
||||
|
||||
/**
|
||||
* To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode
|
||||
* connect your SPI pins to the hardware SPI interface on your board and define
|
||||
|
|
@ -2777,6 +2794,7 @@
|
|||
*
|
||||
* TMCStepper library is required to use TMC stepper drivers.
|
||||
* https://github.com/teemuatlut/TMCStepper
|
||||
* @section tmc/config
|
||||
*/
|
||||
#if HAS_TRINAMIC_CONFIG
|
||||
|
||||
|
|
@ -3000,6 +3018,8 @@
|
|||
//#define E7_HOLD_MULTIPLIER 0.5
|
||||
#endif
|
||||
|
||||
// @section tmc/spi
|
||||
|
||||
/**
|
||||
* Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here.
|
||||
* The default pins can be found in your board's pins file.
|
||||
|
|
@ -3037,6 +3057,8 @@
|
|||
//#define TMC_SW_MISO -1
|
||||
//#define TMC_SW_SCK -1
|
||||
|
||||
// @section tmc/serial
|
||||
|
||||
/**
|
||||
* Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
|
||||
* Set the address using jumpers on pins MS1 and MS2.
|
||||
|
|
@ -3072,6 +3094,8 @@
|
|||
//#define E6_SLAVE_ADDRESS 0
|
||||
//#define E7_SLAVE_ADDRESS 0
|
||||
|
||||
// @section tmc/smart
|
||||
|
||||
/**
|
||||
* Software enable
|
||||
*
|
||||
|
|
@ -3080,6 +3104,8 @@
|
|||
*/
|
||||
//#define SOFTWARE_DRIVER_ENABLE
|
||||
|
||||
// @section tmc/stealthchop
|
||||
|
||||
/**
|
||||
* TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only
|
||||
* Use Trinamic's ultra quiet stepping mode.
|
||||
|
|
@ -3134,6 +3160,8 @@
|
|||
//#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
|
||||
//#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
|
||||
|
||||
// @section tmc/status
|
||||
|
||||
/**
|
||||
* Monitor Trinamic drivers
|
||||
* for error conditions like overtemperature and short to ground.
|
||||
|
|
@ -3153,6 +3181,8 @@
|
|||
#define STOP_ON_ERROR
|
||||
#endif
|
||||
|
||||
// @section tmc/hybrid
|
||||
|
||||
/**
|
||||
* TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only
|
||||
* The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD.
|
||||
|
|
@ -3209,6 +3239,7 @@
|
|||
* homing and adds a guard period for endstop triggering.
|
||||
*
|
||||
* Comment *_STALL_SENSITIVITY to disable sensorless homing for that axis.
|
||||
* @section tmc/stallguard
|
||||
*/
|
||||
//#define SENSORLESS_HOMING // StallGuard capable drivers only
|
||||
|
||||
|
|
@ -3232,6 +3263,8 @@
|
|||
//#define IMPROVE_HOMING_RELIABILITY
|
||||
#endif
|
||||
|
||||
// @section tmc/config
|
||||
|
||||
/**
|
||||
* TMC Homing stepper phase.
|
||||
*
|
||||
|
|
@ -3312,7 +3345,7 @@
|
|||
#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave
|
||||
#endif
|
||||
|
||||
// @section extras
|
||||
// @section photo
|
||||
|
||||
/**
|
||||
* Photo G-code
|
||||
|
|
@ -3355,6 +3388,8 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
// @section cnc
|
||||
|
||||
/**
|
||||
* Spindle & Laser control
|
||||
*
|
||||
|
|
@ -3559,6 +3594,8 @@
|
|||
#define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
|
||||
#endif
|
||||
|
||||
// @section filament width
|
||||
|
||||
/**
|
||||
* Filament Width Sensor
|
||||
*
|
||||
|
|
@ -3592,6 +3629,8 @@
|
|||
//#define FILAMENT_LCD_DISPLAY
|
||||
#endif
|
||||
|
||||
// @section power
|
||||
|
||||
/**
|
||||
* Power Monitor
|
||||
* Monitor voltage (V) and/or current (A), and -when possible- power (W)
|
||||
|
|
@ -3615,6 +3654,8 @@
|
|||
#define POWER_MONITOR_VOLTAGE_OFFSET 0 // Offset (in volts) applied to the calculated voltage
|
||||
#endif
|
||||
|
||||
// @section safety
|
||||
|
||||
/**
|
||||
* Stepper Driver Anti-SNAFU Protection
|
||||
*
|
||||
|
|
@ -3624,6 +3665,8 @@
|
|||
*/
|
||||
//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
|
||||
|
||||
// @section cnc
|
||||
|
||||
/**
|
||||
* CNC Coordinate Systems
|
||||
*
|
||||
|
|
@ -3640,6 +3683,8 @@
|
|||
*/
|
||||
//#define CNC_DRILLING_CYCLE
|
||||
|
||||
// @section reporting
|
||||
|
||||
/**
|
||||
* Auto-report fan speed with M123 S<seconds>
|
||||
* Requires fans with tachometer pins
|
||||
|
|
@ -3667,6 +3712,8 @@
|
|||
//#define M115_GEOMETRY_REPORT
|
||||
#endif
|
||||
|
||||
// @section security
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
|
|
@ -3674,6 +3721,8 @@
|
|||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
// @section volumetrics
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
|
|
@ -3702,14 +3751,7 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Enable this option for a leaner build of Marlin that removes all
|
||||
* workspace offsets, simplifying coordinate transformations, leveling, etc.
|
||||
*
|
||||
* - M206 and M428 are disabled.
|
||||
* - G92 will revert to its behavior from Marlin 1.0.
|
||||
*/
|
||||
//#define NO_WORKSPACE_OFFSETS
|
||||
// @section reporting
|
||||
|
||||
// Extra options for the M114 "Current Position" report
|
||||
//#define M114_DETAIL // Use 'M114` for details to check planner calculations
|
||||
|
|
@ -3718,6 +3760,8 @@
|
|||
|
||||
//#define REPORT_FAN_CHANGE // Report the new fan speed when changed by M106 (and others)
|
||||
|
||||
// @section gcode
|
||||
|
||||
/**
|
||||
* Spend 28 bytes of SRAM to optimize the G-code parser
|
||||
*/
|
||||
|
|
@ -3735,6 +3779,15 @@
|
|||
|
||||
//#define REPETIER_GCODE_M360 // Add commands originally from Repetier FW
|
||||
|
||||
/**
|
||||
* Enable this option for a leaner build of Marlin that removes all
|
||||
* workspace offsets, simplifying coordinate transformations, leveling, etc.
|
||||
*
|
||||
* - M206 and M428 are disabled.
|
||||
* - G92 will revert to its behavior from Marlin 1.0.
|
||||
*/
|
||||
//#define NO_WORKSPACE_OFFSETS
|
||||
|
||||
/**
|
||||
* CNC G-code options
|
||||
* Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.
|
||||
|
|
@ -3751,6 +3804,8 @@
|
|||
#endif
|
||||
//#define G0_ANGULAR_FEEDRATE 2700 // (°/min)
|
||||
|
||||
// @section gcode
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
|
|
@ -3775,6 +3830,8 @@
|
|||
* Up to 25 may be defined, but the actual number is LCD-dependent.
|
||||
*/
|
||||
|
||||
// @section custom main menu
|
||||
|
||||
// Custom Menu: Main Menu
|
||||
//#define CUSTOM_MENU_MAIN
|
||||
#if ENABLED(CUSTOM_MENU_MAIN)
|
||||
|
|
@ -3805,6 +3862,8 @@
|
|||
//#define MAIN_MENU_ITEM_5_CONFIRM
|
||||
#endif
|
||||
|
||||
// @section custom config menu
|
||||
|
||||
// Custom Menu: Configuration Menu
|
||||
//#define CUSTOM_MENU_CONFIG
|
||||
#if ENABLED(CUSTOM_MENU_CONFIG)
|
||||
|
|
@ -3835,6 +3894,8 @@
|
|||
//#define CONFIG_MENU_ITEM_5_CONFIRM
|
||||
#endif
|
||||
|
||||
// @section custom buttons
|
||||
|
||||
/**
|
||||
* User-defined buttons to run custom G-code.
|
||||
* Up to 25 may be defined.
|
||||
|
|
@ -3866,6 +3927,8 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
// @section host
|
||||
|
||||
/**
|
||||
* Host Action Commands
|
||||
*
|
||||
|
|
@ -3891,6 +3954,8 @@
|
|||
//#define HOST_SHUTDOWN_MENU_ITEM // Add a menu item that tells the host to shut down
|
||||
#endif
|
||||
|
||||
// @section extras
|
||||
|
||||
/**
|
||||
* Cancel Objects
|
||||
*
|
||||
|
|
@ -3912,6 +3977,7 @@
|
|||
* Alternative Supplier: https://reliabuild3d.com/
|
||||
*
|
||||
* Reliabuild encoders have been modified to improve reliability.
|
||||
* @section i2c encoders
|
||||
*/
|
||||
|
||||
//#define I2C_POSITION_ENCODERS
|
||||
|
|
@ -3983,6 +4049,7 @@
|
|||
|
||||
/**
|
||||
* Analog Joystick(s)
|
||||
* @section joystick
|
||||
*/
|
||||
//#define JOYSTICK
|
||||
#if ENABLED(JOYSTICK)
|
||||
|
|
@ -4007,6 +4074,7 @@
|
|||
* Modern replacement for the Prusa TMC_Z_CALIBRATION.
|
||||
* Adds capability to work with any adjustable current drivers.
|
||||
* Implemented as G34 because M915 is deprecated.
|
||||
* @section calibrate
|
||||
*/
|
||||
//#define MECHANICAL_GANTRY_CALIBRATION
|
||||
#if ENABLED(MECHANICAL_GANTRY_CALIBRATION)
|
||||
|
|
@ -4024,6 +4092,7 @@
|
|||
/**
|
||||
* Instant freeze / unfreeze functionality
|
||||
* Potentially useful for emergency stop that allows being resumed.
|
||||
* @section interface
|
||||
*/
|
||||
//#define FREEZE_FEATURE
|
||||
#if ENABLED(FREEZE_FEATURE)
|
||||
|
|
@ -4036,6 +4105,7 @@
|
|||
*
|
||||
* Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display.
|
||||
* Requires 3 signal wires. Some useful debug options are included to demonstrate its usage.
|
||||
* @section debug matrix
|
||||
*/
|
||||
//#define MAX7219_DEBUG
|
||||
#if ENABLED(MAX7219_DEBUG)
|
||||
|
|
@ -4074,6 +4144,7 @@
|
|||
* Support for Synchronized Z moves when used with NanoDLP. G0/G1 axis moves will
|
||||
* output a "Z_move_comp" string to enable synchronization with DLP projector exposure.
|
||||
* This feature allows you to use [[WaitForDoneMessage]] instead of M400 commands.
|
||||
* @section nanodlp
|
||||
*/
|
||||
//#define NANODLP_Z_SYNC
|
||||
#if ENABLED(NANODLP_Z_SYNC)
|
||||
|
|
@ -4082,6 +4153,7 @@
|
|||
|
||||
/**
|
||||
* Ethernet. Use M552 to enable and set the IP address.
|
||||
* @section network
|
||||
*/
|
||||
#if HAS_ETHERNET
|
||||
#define MAC_ADDRESS { 0xDE, 0xAD, 0xBE, 0xEF, 0xF0, 0x0D } // A MAC address unique to your network
|
||||
|
|
@ -4109,6 +4181,8 @@
|
|||
//#include "Configuration_Secure.h" // External file with WiFi SSID / Password
|
||||
#endif
|
||||
|
||||
// @section multi-material
|
||||
|
||||
/**
|
||||
* Průša Multi-Material Unit (MMU)
|
||||
* Enable in Configuration.h
|
||||
|
|
@ -4216,6 +4290,7 @@
|
|||
|
||||
/**
|
||||
* Advanced Print Counter settings
|
||||
* @section stats
|
||||
*/
|
||||
#if ENABLED(PRINTCOUNTER)
|
||||
#define SERVICE_WARNING_BUZZES 3
|
||||
|
|
|
|||
|
|
@ -114,6 +114,7 @@
|
|||
* :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
|
||||
*/
|
||||
#define BAUDRATE 250000
|
||||
|
||||
//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate
|
||||
|
||||
/**
|
||||
|
|
@ -122,7 +123,7 @@
|
|||
* :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
//#define SERIAL_PORT_2 -1
|
||||
//#define BAUDRATE_2 250000 // Enable to override BAUDRATE
|
||||
//#define BAUDRATE_2 250000 // :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] Enable to override BAUDRATE
|
||||
|
||||
/**
|
||||
* Select a third serial port on the board to use for communication with the host.
|
||||
|
|
@ -130,7 +131,7 @@
|
|||
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
//#define SERIAL_PORT_3 1
|
||||
//#define BAUDRATE_3 250000 // Enable to override BAUDRATE
|
||||
//#define BAUDRATE_3 250000 // :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] Enable to override BAUDRATE
|
||||
|
||||
// Enable the Bluetooth serial interface on AT90USB devices
|
||||
//#define BLUETOOTH
|
||||
|
|
@ -389,7 +390,7 @@
|
|||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
// @section psu control
|
||||
|
||||
/**
|
||||
* Power Supply Control
|
||||
|
|
@ -625,6 +626,8 @@
|
|||
//============================= PID Settings ================================
|
||||
//===========================================================================
|
||||
|
||||
// @section hotend temp
|
||||
|
||||
// Enable PIDTEMP for PID control or MPCTEMP for Predictive Model.
|
||||
// temperature control. Disable both for bang-bang heating.
|
||||
#define PIDTEMP // See the PID Tuning Guide at https://reprap.org/wiki/PID_Tuning
|
||||
|
|
@ -635,7 +638,8 @@
|
|||
#define PID_K1 0.95 // Smoothing factor within any PID loop
|
||||
|
||||
#if ENABLED(PIDTEMP)
|
||||
//#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders)
|
||||
//#define PID_DEBUG // Print PID debug data to the serial port. Use 'M303 D' to toggle activation.
|
||||
//#define PID_PARAMS_PER_HOTEND // Use separate PID parameters for each extruder (useful for mismatched extruders)
|
||||
// Set/get with G-code: M301 E[extruder number, 0-2]
|
||||
|
||||
// A10M [@thinkyhead]
|
||||
|
|
@ -658,6 +662,7 @@
|
|||
* Use a physical model of the hotend to control temperature. When configured correctly
|
||||
* this gives better responsiveness and stability than PID and it also removes the need
|
||||
* for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model.
|
||||
* @section mpctemp
|
||||
*/
|
||||
#if ENABLED(MPCTEMP)
|
||||
//#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash)
|
||||
|
|
@ -725,7 +730,7 @@
|
|||
|
||||
#if ENABLED(PIDTEMPBED)
|
||||
//#define MIN_BED_POWER 0
|
||||
//#define PID_BED_DEBUG // Sends debug data to the serial port.
|
||||
//#define PID_BED_DEBUG // Print Bed PID debug data to the serial port.
|
||||
|
||||
// MeCreator2 generated by Autotune
|
||||
#define DEFAULT_bedKp 182.46 // 175.68 189.95
|
||||
|
|
@ -752,6 +757,7 @@
|
|||
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 200W
|
||||
* heater. If your configuration is significantly different than this and you don't understand
|
||||
* the issues involved, don't use chamber PID until someone else verifies that your hardware works.
|
||||
* @section chamber temp
|
||||
*/
|
||||
//#define PIDTEMPCHAMBER
|
||||
//#define CHAMBER_LIMIT_SWITCHING
|
||||
|
|
@ -766,7 +772,7 @@
|
|||
|
||||
#if ENABLED(PIDTEMPCHAMBER)
|
||||
#define MIN_CHAMBER_POWER 0
|
||||
//#define PID_CHAMBER_DEBUG // Sends debug data to the serial port.
|
||||
//#define PID_CHAMBER_DEBUG // Print Chamber PID debug data to the serial port.
|
||||
|
||||
// Lasko "MyHeat Personal Heater" (200w) modified with a Fotek SSR-10DA to control only the heating element
|
||||
// and placed inside the small Creality printer enclosure tent.
|
||||
|
|
@ -780,7 +786,6 @@
|
|||
#endif // PIDTEMPCHAMBER
|
||||
|
||||
#if ANY(PIDTEMP, PIDTEMPBED, PIDTEMPCHAMBER)
|
||||
//#define PID_DEBUG // Sends debug data to the serial port. Use 'M303 D' to toggle activation.
|
||||
//#define PID_OPENLOOP // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX
|
||||
//#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay
|
||||
#define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature
|
||||
|
|
@ -790,7 +795,7 @@
|
|||
#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of flash)
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
// @section safety
|
||||
|
||||
/**
|
||||
* Prevent extrusion if the temperature is below EXTRUDE_MINTEMP.
|
||||
|
|
@ -858,6 +863,8 @@
|
|||
#define POLAR_SEGMENTS_PER_SECOND 5
|
||||
#endif
|
||||
|
||||
// @section delta
|
||||
|
||||
// Enable for DELTA kinematics and configure below
|
||||
//#define DELTA
|
||||
#if ENABLED(DELTA)
|
||||
|
|
@ -917,6 +924,8 @@
|
|||
//#define DELTA_DIAGONAL_ROD_TRIM_TOWER { 0.0, 0.0, 0.0 }
|
||||
#endif
|
||||
|
||||
// @section scara
|
||||
|
||||
/**
|
||||
* MORGAN_SCARA was developed by QHARLEY in South Africa in 2012-2013.
|
||||
* Implemented and slightly reworked by JCERNY in June, 2014.
|
||||
|
|
@ -960,6 +969,8 @@
|
|||
|
||||
#endif
|
||||
|
||||
// @section tpara
|
||||
|
||||
// Enable for TPARA kinematics and configure below
|
||||
//#define AXEL_TPARA
|
||||
#if ENABLED(AXEL_TPARA)
|
||||
|
|
@ -986,6 +997,8 @@
|
|||
#define PSI_HOMING_OFFSET 0
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
|
|
@ -997,7 +1010,7 @@
|
|||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
||||
// @section homing
|
||||
// @section endstops
|
||||
|
||||
// Specify here all the endstop connectors that are connected to any endstop or probe.
|
||||
// Almost all printers will be using one per axis. Probes will use one or more of the
|
||||
|
|
@ -1667,7 +1680,7 @@
|
|||
//#define V_HOME_DIR -1
|
||||
//#define W_HOME_DIR -1
|
||||
|
||||
// @section machine
|
||||
// @section geometry
|
||||
|
||||
// The size of the printable area
|
||||
#define X_BED_SIZE 230
|
||||
|
|
@ -2129,7 +2142,7 @@
|
|||
//============================= Additional Features ===========================
|
||||
//=============================================================================
|
||||
|
||||
// @section extras
|
||||
// @section eeprom
|
||||
|
||||
/**
|
||||
* EEPROM
|
||||
|
|
@ -2149,6 +2162,8 @@
|
|||
//#define EEPROM_INIT_NOW // Init EEPROM on first boot after a new build.
|
||||
#endif
|
||||
|
||||
// @section host
|
||||
|
||||
//
|
||||
// Host Keepalive
|
||||
//
|
||||
|
|
@ -2159,6 +2174,8 @@
|
|||
#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113.
|
||||
#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating
|
||||
|
||||
// @section units
|
||||
|
||||
//
|
||||
// G20/G21 Inch mode support
|
||||
//
|
||||
|
|
@ -2186,6 +2203,8 @@
|
|||
#define PREHEAT_2_TEMP_CHAMBER 35
|
||||
#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
|
||||
|
||||
// @section motion
|
||||
|
||||
/**
|
||||
* Nozzle Park
|
||||
*
|
||||
|
|
@ -2284,6 +2303,8 @@
|
|||
|
||||
#endif
|
||||
|
||||
// @section host
|
||||
|
||||
/**
|
||||
* Print Job Timer
|
||||
*
|
||||
|
|
@ -2310,6 +2331,8 @@
|
|||
*/
|
||||
#define PRINTJOB_TIMER_AUTOSTART
|
||||
|
||||
// @section stats
|
||||
|
||||
/**
|
||||
* Print Counter
|
||||
*
|
||||
|
|
@ -2327,6 +2350,8 @@
|
|||
#define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print
|
||||
#endif
|
||||
|
||||
// @section security
|
||||
|
||||
/**
|
||||
* Password
|
||||
*
|
||||
|
|
@ -2362,7 +2387,7 @@
|
|||
//============================= LCD and SD support ============================
|
||||
//=============================================================================
|
||||
|
||||
// @section lcd
|
||||
// @section interface
|
||||
|
||||
/**
|
||||
* LCD LANGUAGE
|
||||
|
|
@ -2518,6 +2543,7 @@
|
|||
//======================== LCD / Controller Selection =========================
|
||||
//======================== (Character-based LCDs) =========================
|
||||
//=============================================================================
|
||||
// @section lcd
|
||||
|
||||
//
|
||||
// RepRapDiscount Smart Controller.
|
||||
|
|
@ -3163,7 +3189,7 @@
|
|||
//=============================== Extra Features ==============================
|
||||
//=============================================================================
|
||||
|
||||
// @section extras
|
||||
// @section fans
|
||||
|
||||
// Set number of user-controlled fans. Disable to use all board-defined fans.
|
||||
// :[1,2,3,4,5,6,7,8]
|
||||
|
|
@ -3187,14 +3213,18 @@
|
|||
// duty cycle is attained.
|
||||
//#define SOFT_PWM_DITHER
|
||||
|
||||
// @section extras
|
||||
|
||||
// Support for the BariCUDA Paste Extruder
|
||||
//#define BARICUDA
|
||||
|
||||
// @section lights
|
||||
|
||||
// Temperature status LEDs that display the hotend and bed temperature.
|
||||
// If all hotends, bed temperature, and target temperature are under 54C
|
||||
// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis)
|
||||
//#define TEMP_STAT_LEDS
|
||||
|
||||
// Support for the BariCUDA Paste Extruder
|
||||
//#define BARICUDA
|
||||
|
||||
// Support for BlinkM/CyzRgb
|
||||
//#define BLINKM
|
||||
|
||||
|
|
@ -3280,6 +3310,8 @@
|
|||
#define PRINTER_EVENT_LEDS
|
||||
#endif
|
||||
|
||||
// @section servos
|
||||
|
||||
/**
|
||||
* Number of servos
|
||||
*
|
||||
|
|
|
|||
|
|
@ -32,6 +32,24 @@
|
|||
*/
|
||||
#define CONFIGURATION_ADV_H_VERSION 02010100
|
||||
|
||||
// @section develop
|
||||
|
||||
/**
|
||||
* Configuration Dump to JSON and INI format
|
||||
*
|
||||
* Dump the configuration as part of the build. (See signature.py)
|
||||
* Output files are saved with the build (e.g., .pio/build/mega2560).
|
||||
*
|
||||
* See `build_all_examples --ini` as an example of config.ini archiving.
|
||||
*
|
||||
* 1 = marlin_config.json - Dictionary containing the configuration.
|
||||
* This file is also generated for CONFIGURATION_EMBEDDING.
|
||||
* 2 = config.ini - File format for PlatformIO preprocessing.
|
||||
* 3 = schema.json - The entire configuration schema. (13 = pattern groups)
|
||||
* 4 = schema.yml - The entire configuration schema.
|
||||
*/
|
||||
//#define CONFIG_DUMP // :[1:'JSON', 2:'config.ini', 3:'schema.json', 4:'schema.yml']
|
||||
|
||||
//===========================================================================
|
||||
//============================= Thermal Settings ============================
|
||||
//===========================================================================
|
||||
|
|
@ -2558,6 +2576,8 @@
|
|||
#endif
|
||||
#endif // HAS_MULTI_EXTRUDER
|
||||
|
||||
// @section advanced pause
|
||||
|
||||
/**
|
||||
* Advanced Pause for Filament Change
|
||||
* - Adds the G-code M600 Filament Change to initiate a filament change.
|
||||
|
|
@ -2616,13 +2636,12 @@
|
|||
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
|
||||
#endif
|
||||
|
||||
// @section tmc
|
||||
|
||||
/**
|
||||
* TMC26X Stepper Driver options
|
||||
*
|
||||
* The TMC26XStepper library is required for this stepper driver.
|
||||
* https://github.com/trinamic/TMC26XStepper
|
||||
* @section tmc/tmc26x
|
||||
*/
|
||||
#if HAS_DRIVER(TMC26X)
|
||||
|
||||
|
|
@ -2760,8 +2779,6 @@
|
|||
|
||||
#endif // TMC26X
|
||||
|
||||
// @section tmc_smart
|
||||
|
||||
/**
|
||||
* To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode
|
||||
* connect your SPI pins to the hardware SPI interface on your board and define
|
||||
|
|
@ -2777,6 +2794,7 @@
|
|||
*
|
||||
* TMCStepper library is required to use TMC stepper drivers.
|
||||
* https://github.com/teemuatlut/TMCStepper
|
||||
* @section tmc/config
|
||||
*/
|
||||
#if HAS_TRINAMIC_CONFIG
|
||||
|
||||
|
|
@ -3000,6 +3018,8 @@
|
|||
//#define E7_HOLD_MULTIPLIER 0.5
|
||||
#endif
|
||||
|
||||
// @section tmc/spi
|
||||
|
||||
/**
|
||||
* Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here.
|
||||
* The default pins can be found in your board's pins file.
|
||||
|
|
@ -3037,6 +3057,8 @@
|
|||
//#define TMC_SW_MISO -1
|
||||
//#define TMC_SW_SCK -1
|
||||
|
||||
// @section tmc/serial
|
||||
|
||||
/**
|
||||
* Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
|
||||
* Set the address using jumpers on pins MS1 and MS2.
|
||||
|
|
@ -3072,6 +3094,8 @@
|
|||
//#define E6_SLAVE_ADDRESS 0
|
||||
//#define E7_SLAVE_ADDRESS 0
|
||||
|
||||
// @section tmc/smart
|
||||
|
||||
/**
|
||||
* Software enable
|
||||
*
|
||||
|
|
@ -3080,6 +3104,8 @@
|
|||
*/
|
||||
//#define SOFTWARE_DRIVER_ENABLE
|
||||
|
||||
// @section tmc/stealthchop
|
||||
|
||||
/**
|
||||
* TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only
|
||||
* Use Trinamic's ultra quiet stepping mode.
|
||||
|
|
@ -3134,6 +3160,8 @@
|
|||
//#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
|
||||
//#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
|
||||
|
||||
// @section tmc/status
|
||||
|
||||
/**
|
||||
* Monitor Trinamic drivers
|
||||
* for error conditions like overtemperature and short to ground.
|
||||
|
|
@ -3153,6 +3181,8 @@
|
|||
#define STOP_ON_ERROR
|
||||
#endif
|
||||
|
||||
// @section tmc/hybrid
|
||||
|
||||
/**
|
||||
* TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only
|
||||
* The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD.
|
||||
|
|
@ -3209,6 +3239,7 @@
|
|||
* homing and adds a guard period for endstop triggering.
|
||||
*
|
||||
* Comment *_STALL_SENSITIVITY to disable sensorless homing for that axis.
|
||||
* @section tmc/stallguard
|
||||
*/
|
||||
//#define SENSORLESS_HOMING // StallGuard capable drivers only
|
||||
|
||||
|
|
@ -3232,6 +3263,8 @@
|
|||
//#define IMPROVE_HOMING_RELIABILITY
|
||||
#endif
|
||||
|
||||
// @section tmc/config
|
||||
|
||||
/**
|
||||
* TMC Homing stepper phase.
|
||||
*
|
||||
|
|
@ -3312,7 +3345,7 @@
|
|||
#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave
|
||||
#endif
|
||||
|
||||
// @section extras
|
||||
// @section photo
|
||||
|
||||
/**
|
||||
* Photo G-code
|
||||
|
|
@ -3355,6 +3388,8 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
// @section cnc
|
||||
|
||||
/**
|
||||
* Spindle & Laser control
|
||||
*
|
||||
|
|
@ -3559,6 +3594,8 @@
|
|||
#define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
|
||||
#endif
|
||||
|
||||
// @section filament width
|
||||
|
||||
/**
|
||||
* Filament Width Sensor
|
||||
*
|
||||
|
|
@ -3592,6 +3629,8 @@
|
|||
//#define FILAMENT_LCD_DISPLAY
|
||||
#endif
|
||||
|
||||
// @section power
|
||||
|
||||
/**
|
||||
* Power Monitor
|
||||
* Monitor voltage (V) and/or current (A), and -when possible- power (W)
|
||||
|
|
@ -3615,6 +3654,8 @@
|
|||
#define POWER_MONITOR_VOLTAGE_OFFSET 0 // Offset (in volts) applied to the calculated voltage
|
||||
#endif
|
||||
|
||||
// @section safety
|
||||
|
||||
/**
|
||||
* Stepper Driver Anti-SNAFU Protection
|
||||
*
|
||||
|
|
@ -3624,6 +3665,8 @@
|
|||
*/
|
||||
//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
|
||||
|
||||
// @section cnc
|
||||
|
||||
/**
|
||||
* CNC Coordinate Systems
|
||||
*
|
||||
|
|
@ -3640,6 +3683,8 @@
|
|||
*/
|
||||
//#define CNC_DRILLING_CYCLE
|
||||
|
||||
// @section reporting
|
||||
|
||||
/**
|
||||
* Auto-report fan speed with M123 S<seconds>
|
||||
* Requires fans with tachometer pins
|
||||
|
|
@ -3667,6 +3712,8 @@
|
|||
//#define M115_GEOMETRY_REPORT
|
||||
#endif
|
||||
|
||||
// @section security
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
|
|
@ -3674,6 +3721,8 @@
|
|||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
// @section volumetrics
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
|
|
@ -3702,14 +3751,7 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Enable this option for a leaner build of Marlin that removes all
|
||||
* workspace offsets, simplifying coordinate transformations, leveling, etc.
|
||||
*
|
||||
* - M206 and M428 are disabled.
|
||||
* - G92 will revert to its behavior from Marlin 1.0.
|
||||
*/
|
||||
#define NO_WORKSPACE_OFFSETS
|
||||
// @section reporting
|
||||
|
||||
// Extra options for the M114 "Current Position" report
|
||||
//#define M114_DETAIL // Use 'M114` for details to check planner calculations
|
||||
|
|
@ -3718,6 +3760,8 @@
|
|||
|
||||
//#define REPORT_FAN_CHANGE // Report the new fan speed when changed by M106 (and others)
|
||||
|
||||
// @section gcode
|
||||
|
||||
/**
|
||||
* Spend 28 bytes of SRAM to optimize the G-code parser
|
||||
*/
|
||||
|
|
@ -3735,6 +3779,15 @@
|
|||
|
||||
//#define REPETIER_GCODE_M360 // Add commands originally from Repetier FW
|
||||
|
||||
/**
|
||||
* Enable this option for a leaner build of Marlin that removes all
|
||||
* workspace offsets, simplifying coordinate transformations, leveling, etc.
|
||||
*
|
||||
* - M206 and M428 are disabled.
|
||||
* - G92 will revert to its behavior from Marlin 1.0.
|
||||
*/
|
||||
#define NO_WORKSPACE_OFFSETS
|
||||
|
||||
/**
|
||||
* CNC G-code options
|
||||
* Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.
|
||||
|
|
@ -3751,6 +3804,8 @@
|
|||
#endif
|
||||
//#define G0_ANGULAR_FEEDRATE 2700 // (°/min)
|
||||
|
||||
// @section gcode
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
|
|
@ -3775,6 +3830,8 @@
|
|||
* Up to 25 may be defined, but the actual number is LCD-dependent.
|
||||
*/
|
||||
|
||||
// @section custom main menu
|
||||
|
||||
// Custom Menu: Main Menu
|
||||
//#define CUSTOM_MENU_MAIN
|
||||
#if ENABLED(CUSTOM_MENU_MAIN)
|
||||
|
|
@ -3805,6 +3862,8 @@
|
|||
//#define MAIN_MENU_ITEM_5_CONFIRM
|
||||
#endif
|
||||
|
||||
// @section custom config menu
|
||||
|
||||
// Custom Menu: Configuration Menu
|
||||
//#define CUSTOM_MENU_CONFIG
|
||||
#if ENABLED(CUSTOM_MENU_CONFIG)
|
||||
|
|
@ -3835,6 +3894,8 @@
|
|||
//#define CONFIG_MENU_ITEM_5_CONFIRM
|
||||
#endif
|
||||
|
||||
// @section custom buttons
|
||||
|
||||
/**
|
||||
* User-defined buttons to run custom G-code.
|
||||
* Up to 25 may be defined.
|
||||
|
|
@ -3866,6 +3927,8 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
// @section host
|
||||
|
||||
/**
|
||||
* Host Action Commands
|
||||
*
|
||||
|
|
@ -3891,6 +3954,8 @@
|
|||
//#define HOST_SHUTDOWN_MENU_ITEM // Add a menu item that tells the host to shut down
|
||||
#endif
|
||||
|
||||
// @section extras
|
||||
|
||||
/**
|
||||
* Cancel Objects
|
||||
*
|
||||
|
|
@ -3912,6 +3977,7 @@
|
|||
* Alternative Supplier: https://reliabuild3d.com/
|
||||
*
|
||||
* Reliabuild encoders have been modified to improve reliability.
|
||||
* @section i2c encoders
|
||||
*/
|
||||
|
||||
//#define I2C_POSITION_ENCODERS
|
||||
|
|
@ -3983,6 +4049,7 @@
|
|||
|
||||
/**
|
||||
* Analog Joystick(s)
|
||||
* @section joystick
|
||||
*/
|
||||
//#define JOYSTICK
|
||||
#if ENABLED(JOYSTICK)
|
||||
|
|
@ -4007,6 +4074,7 @@
|
|||
* Modern replacement for the Prusa TMC_Z_CALIBRATION.
|
||||
* Adds capability to work with any adjustable current drivers.
|
||||
* Implemented as G34 because M915 is deprecated.
|
||||
* @section calibrate
|
||||
*/
|
||||
//#define MECHANICAL_GANTRY_CALIBRATION
|
||||
#if ENABLED(MECHANICAL_GANTRY_CALIBRATION)
|
||||
|
|
@ -4024,6 +4092,7 @@
|
|||
/**
|
||||
* Instant freeze / unfreeze functionality
|
||||
* Potentially useful for emergency stop that allows being resumed.
|
||||
* @section interface
|
||||
*/
|
||||
//#define FREEZE_FEATURE
|
||||
#if ENABLED(FREEZE_FEATURE)
|
||||
|
|
@ -4036,6 +4105,7 @@
|
|||
*
|
||||
* Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display.
|
||||
* Requires 3 signal wires. Some useful debug options are included to demonstrate its usage.
|
||||
* @section debug matrix
|
||||
*/
|
||||
//#define MAX7219_DEBUG
|
||||
#if ENABLED(MAX7219_DEBUG)
|
||||
|
|
@ -4074,6 +4144,7 @@
|
|||
* Support for Synchronized Z moves when used with NanoDLP. G0/G1 axis moves will
|
||||
* output a "Z_move_comp" string to enable synchronization with DLP projector exposure.
|
||||
* This feature allows you to use [[WaitForDoneMessage]] instead of M400 commands.
|
||||
* @section nanodlp
|
||||
*/
|
||||
//#define NANODLP_Z_SYNC
|
||||
#if ENABLED(NANODLP_Z_SYNC)
|
||||
|
|
@ -4082,6 +4153,7 @@
|
|||
|
||||
/**
|
||||
* Ethernet. Use M552 to enable and set the IP address.
|
||||
* @section network
|
||||
*/
|
||||
#if HAS_ETHERNET
|
||||
#define MAC_ADDRESS { 0xDE, 0xAD, 0xBE, 0xEF, 0xF0, 0x0D } // A MAC address unique to your network
|
||||
|
|
@ -4109,6 +4181,8 @@
|
|||
//#include "Configuration_Secure.h" // External file with WiFi SSID / Password
|
||||
#endif
|
||||
|
||||
// @section multi-material
|
||||
|
||||
/**
|
||||
* Průša Multi-Material Unit (MMU)
|
||||
* Enable in Configuration.h
|
||||
|
|
@ -4216,6 +4290,7 @@
|
|||
|
||||
/**
|
||||
* Advanced Print Counter settings
|
||||
* @section stats
|
||||
*/
|
||||
#if ENABLED(PRINTCOUNTER)
|
||||
#define SERVICE_WARNING_BUZZES 3
|
||||
|
|
|
|||
|
|
@ -114,6 +114,7 @@
|
|||
* :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
|
||||
*/
|
||||
#define BAUDRATE 250000
|
||||
|
||||
//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate
|
||||
|
||||
/**
|
||||
|
|
@ -122,7 +123,7 @@
|
|||
* :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
//#define SERIAL_PORT_2 -1
|
||||
//#define BAUDRATE_2 250000 // Enable to override BAUDRATE
|
||||
//#define BAUDRATE_2 250000 // :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] Enable to override BAUDRATE
|
||||
|
||||
/**
|
||||
* Select a third serial port on the board to use for communication with the host.
|
||||
|
|
@ -130,7 +131,7 @@
|
|||
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
//#define SERIAL_PORT_3 1
|
||||
//#define BAUDRATE_3 250000 // Enable to override BAUDRATE
|
||||
//#define BAUDRATE_3 250000 // :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] Enable to override BAUDRATE
|
||||
|
||||
// Enable the Bluetooth serial interface on AT90USB devices
|
||||
//#define BLUETOOTH
|
||||
|
|
@ -389,7 +390,7 @@
|
|||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
// @section psu control
|
||||
|
||||
/**
|
||||
* Power Supply Control
|
||||
|
|
@ -625,6 +626,8 @@
|
|||
//============================= PID Settings ================================
|
||||
//===========================================================================
|
||||
|
||||
// @section hotend temp
|
||||
|
||||
// Enable PIDTEMP for PID control or MPCTEMP for Predictive Model.
|
||||
// temperature control. Disable both for bang-bang heating.
|
||||
#define PIDTEMP // See the PID Tuning Guide at https://reprap.org/wiki/PID_Tuning
|
||||
|
|
@ -635,7 +638,8 @@
|
|||
#define PID_K1 0.95 // Smoothing factor within any PID loop
|
||||
|
||||
#if ENABLED(PIDTEMP)
|
||||
//#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders)
|
||||
//#define PID_DEBUG // Print PID debug data to the serial port. Use 'M303 D' to toggle activation.
|
||||
//#define PID_PARAMS_PER_HOTEND // Use separate PID parameters for each extruder (useful for mismatched extruders)
|
||||
// Set/get with G-code: M301 E[extruder number, 0-2]
|
||||
|
||||
// A10M [@thinkyhead]
|
||||
|
|
@ -658,6 +662,7 @@
|
|||
* Use a physical model of the hotend to control temperature. When configured correctly
|
||||
* this gives better responsiveness and stability than PID and it also removes the need
|
||||
* for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model.
|
||||
* @section mpctemp
|
||||
*/
|
||||
#if ENABLED(MPCTEMP)
|
||||
//#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash)
|
||||
|
|
@ -725,7 +730,7 @@
|
|||
|
||||
#if ENABLED(PIDTEMPBED)
|
||||
//#define MIN_BED_POWER 0
|
||||
//#define PID_BED_DEBUG // Sends debug data to the serial port.
|
||||
//#define PID_BED_DEBUG // Print Bed PID debug data to the serial port.
|
||||
|
||||
// MeCreator2 generated by Autotune
|
||||
#define DEFAULT_bedKp 182.46 // 175.68 189.95
|
||||
|
|
@ -752,6 +757,7 @@
|
|||
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 200W
|
||||
* heater. If your configuration is significantly different than this and you don't understand
|
||||
* the issues involved, don't use chamber PID until someone else verifies that your hardware works.
|
||||
* @section chamber temp
|
||||
*/
|
||||
//#define PIDTEMPCHAMBER
|
||||
//#define CHAMBER_LIMIT_SWITCHING
|
||||
|
|
@ -766,7 +772,7 @@
|
|||
|
||||
#if ENABLED(PIDTEMPCHAMBER)
|
||||
#define MIN_CHAMBER_POWER 0
|
||||
//#define PID_CHAMBER_DEBUG // Sends debug data to the serial port.
|
||||
//#define PID_CHAMBER_DEBUG // Print Chamber PID debug data to the serial port.
|
||||
|
||||
// Lasko "MyHeat Personal Heater" (200w) modified with a Fotek SSR-10DA to control only the heating element
|
||||
// and placed inside the small Creality printer enclosure tent.
|
||||
|
|
@ -780,7 +786,6 @@
|
|||
#endif // PIDTEMPCHAMBER
|
||||
|
||||
#if ANY(PIDTEMP, PIDTEMPBED, PIDTEMPCHAMBER)
|
||||
//#define PID_DEBUG // Sends debug data to the serial port. Use 'M303 D' to toggle activation.
|
||||
//#define PID_OPENLOOP // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX
|
||||
//#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay
|
||||
#define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature
|
||||
|
|
@ -790,7 +795,7 @@
|
|||
#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of flash)
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
// @section safety
|
||||
|
||||
/**
|
||||
* Prevent extrusion if the temperature is below EXTRUDE_MINTEMP.
|
||||
|
|
@ -858,6 +863,8 @@
|
|||
#define POLAR_SEGMENTS_PER_SECOND 5
|
||||
#endif
|
||||
|
||||
// @section delta
|
||||
|
||||
// Enable for DELTA kinematics and configure below
|
||||
//#define DELTA
|
||||
#if ENABLED(DELTA)
|
||||
|
|
@ -917,6 +924,8 @@
|
|||
//#define DELTA_DIAGONAL_ROD_TRIM_TOWER { 0.0, 0.0, 0.0 }
|
||||
#endif
|
||||
|
||||
// @section scara
|
||||
|
||||
/**
|
||||
* MORGAN_SCARA was developed by QHARLEY in South Africa in 2012-2013.
|
||||
* Implemented and slightly reworked by JCERNY in June, 2014.
|
||||
|
|
@ -960,6 +969,8 @@
|
|||
|
||||
#endif
|
||||
|
||||
// @section tpara
|
||||
|
||||
// Enable for TPARA kinematics and configure below
|
||||
//#define AXEL_TPARA
|
||||
#if ENABLED(AXEL_TPARA)
|
||||
|
|
@ -986,6 +997,8 @@
|
|||
#define PSI_HOMING_OFFSET 0
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
|
|
@ -997,7 +1010,7 @@
|
|||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
||||
// @section homing
|
||||
// @section endstops
|
||||
|
||||
// Specify here all the endstop connectors that are connected to any endstop or probe.
|
||||
// Almost all printers will be using one per axis. Probes will use one or more of the
|
||||
|
|
@ -1667,7 +1680,7 @@
|
|||
//#define V_HOME_DIR -1
|
||||
//#define W_HOME_DIR -1
|
||||
|
||||
// @section machine
|
||||
// @section geometry
|
||||
|
||||
// The size of the printable area
|
||||
#define X_BED_SIZE 230
|
||||
|
|
@ -2129,7 +2142,7 @@
|
|||
//============================= Additional Features ===========================
|
||||
//=============================================================================
|
||||
|
||||
// @section extras
|
||||
// @section eeprom
|
||||
|
||||
/**
|
||||
* EEPROM
|
||||
|
|
@ -2149,6 +2162,8 @@
|
|||
//#define EEPROM_INIT_NOW // Init EEPROM on first boot after a new build.
|
||||
#endif
|
||||
|
||||
// @section host
|
||||
|
||||
//
|
||||
// Host Keepalive
|
||||
//
|
||||
|
|
@ -2159,6 +2174,8 @@
|
|||
#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113.
|
||||
#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating
|
||||
|
||||
// @section units
|
||||
|
||||
//
|
||||
// G20/G21 Inch mode support
|
||||
//
|
||||
|
|
@ -2186,6 +2203,8 @@
|
|||
#define PREHEAT_2_TEMP_CHAMBER 35
|
||||
#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
|
||||
|
||||
// @section motion
|
||||
|
||||
/**
|
||||
* Nozzle Park
|
||||
*
|
||||
|
|
@ -2284,6 +2303,8 @@
|
|||
|
||||
#endif
|
||||
|
||||
// @section host
|
||||
|
||||
/**
|
||||
* Print Job Timer
|
||||
*
|
||||
|
|
@ -2310,6 +2331,8 @@
|
|||
*/
|
||||
#define PRINTJOB_TIMER_AUTOSTART
|
||||
|
||||
// @section stats
|
||||
|
||||
/**
|
||||
* Print Counter
|
||||
*
|
||||
|
|
@ -2327,6 +2350,8 @@
|
|||
#define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print
|
||||
#endif
|
||||
|
||||
// @section security
|
||||
|
||||
/**
|
||||
* Password
|
||||
*
|
||||
|
|
@ -2362,7 +2387,7 @@
|
|||
//============================= LCD and SD support ============================
|
||||
//=============================================================================
|
||||
|
||||
// @section lcd
|
||||
// @section interface
|
||||
|
||||
/**
|
||||
* LCD LANGUAGE
|
||||
|
|
@ -2518,6 +2543,7 @@
|
|||
//======================== LCD / Controller Selection =========================
|
||||
//======================== (Character-based LCDs) =========================
|
||||
//=============================================================================
|
||||
// @section lcd
|
||||
|
||||
//
|
||||
// RepRapDiscount Smart Controller.
|
||||
|
|
@ -3163,7 +3189,7 @@
|
|||
//=============================== Extra Features ==============================
|
||||
//=============================================================================
|
||||
|
||||
// @section extras
|
||||
// @section fans
|
||||
|
||||
// Set number of user-controlled fans. Disable to use all board-defined fans.
|
||||
// :[1,2,3,4,5,6,7,8]
|
||||
|
|
@ -3187,14 +3213,18 @@
|
|||
// duty cycle is attained.
|
||||
//#define SOFT_PWM_DITHER
|
||||
|
||||
// @section extras
|
||||
|
||||
// Support for the BariCUDA Paste Extruder
|
||||
//#define BARICUDA
|
||||
|
||||
// @section lights
|
||||
|
||||
// Temperature status LEDs that display the hotend and bed temperature.
|
||||
// If all hotends, bed temperature, and target temperature are under 54C
|
||||
// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis)
|
||||
//#define TEMP_STAT_LEDS
|
||||
|
||||
// Support for the BariCUDA Paste Extruder
|
||||
//#define BARICUDA
|
||||
|
||||
// Support for BlinkM/CyzRgb
|
||||
//#define BLINKM
|
||||
|
||||
|
|
@ -3280,6 +3310,8 @@
|
|||
#define PRINTER_EVENT_LEDS
|
||||
#endif
|
||||
|
||||
// @section servos
|
||||
|
||||
/**
|
||||
* Number of servos
|
||||
*
|
||||
|
|
|
|||
|
|
@ -32,6 +32,24 @@
|
|||
*/
|
||||
#define CONFIGURATION_ADV_H_VERSION 02010100
|
||||
|
||||
// @section develop
|
||||
|
||||
/**
|
||||
* Configuration Dump to JSON and INI format
|
||||
*
|
||||
* Dump the configuration as part of the build. (See signature.py)
|
||||
* Output files are saved with the build (e.g., .pio/build/mega2560).
|
||||
*
|
||||
* See `build_all_examples --ini` as an example of config.ini archiving.
|
||||
*
|
||||
* 1 = marlin_config.json - Dictionary containing the configuration.
|
||||
* This file is also generated for CONFIGURATION_EMBEDDING.
|
||||
* 2 = config.ini - File format for PlatformIO preprocessing.
|
||||
* 3 = schema.json - The entire configuration schema. (13 = pattern groups)
|
||||
* 4 = schema.yml - The entire configuration schema.
|
||||
*/
|
||||
//#define CONFIG_DUMP // :[1:'JSON', 2:'config.ini', 3:'schema.json', 4:'schema.yml']
|
||||
|
||||
//===========================================================================
|
||||
//============================= Thermal Settings ============================
|
||||
//===========================================================================
|
||||
|
|
@ -2558,6 +2576,8 @@
|
|||
#endif
|
||||
#endif // HAS_MULTI_EXTRUDER
|
||||
|
||||
// @section advanced pause
|
||||
|
||||
/**
|
||||
* Advanced Pause for Filament Change
|
||||
* - Adds the G-code M600 Filament Change to initiate a filament change.
|
||||
|
|
@ -2616,13 +2636,12 @@
|
|||
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
|
||||
#endif
|
||||
|
||||
// @section tmc
|
||||
|
||||
/**
|
||||
* TMC26X Stepper Driver options
|
||||
*
|
||||
* The TMC26XStepper library is required for this stepper driver.
|
||||
* https://github.com/trinamic/TMC26XStepper
|
||||
* @section tmc/tmc26x
|
||||
*/
|
||||
#if HAS_DRIVER(TMC26X)
|
||||
|
||||
|
|
@ -2760,8 +2779,6 @@
|
|||
|
||||
#endif // TMC26X
|
||||
|
||||
// @section tmc_smart
|
||||
|
||||
/**
|
||||
* To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode
|
||||
* connect your SPI pins to the hardware SPI interface on your board and define
|
||||
|
|
@ -2777,6 +2794,7 @@
|
|||
*
|
||||
* TMCStepper library is required to use TMC stepper drivers.
|
||||
* https://github.com/teemuatlut/TMCStepper
|
||||
* @section tmc/config
|
||||
*/
|
||||
#if HAS_TRINAMIC_CONFIG
|
||||
|
||||
|
|
@ -3000,6 +3018,8 @@
|
|||
//#define E7_HOLD_MULTIPLIER 0.5
|
||||
#endif
|
||||
|
||||
// @section tmc/spi
|
||||
|
||||
/**
|
||||
* Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here.
|
||||
* The default pins can be found in your board's pins file.
|
||||
|
|
@ -3037,6 +3057,8 @@
|
|||
//#define TMC_SW_MISO -1
|
||||
//#define TMC_SW_SCK -1
|
||||
|
||||
// @section tmc/serial
|
||||
|
||||
/**
|
||||
* Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
|
||||
* Set the address using jumpers on pins MS1 and MS2.
|
||||
|
|
@ -3072,6 +3094,8 @@
|
|||
//#define E6_SLAVE_ADDRESS 0
|
||||
//#define E7_SLAVE_ADDRESS 0
|
||||
|
||||
// @section tmc/smart
|
||||
|
||||
/**
|
||||
* Software enable
|
||||
*
|
||||
|
|
@ -3080,6 +3104,8 @@
|
|||
*/
|
||||
//#define SOFTWARE_DRIVER_ENABLE
|
||||
|
||||
// @section tmc/stealthchop
|
||||
|
||||
/**
|
||||
* TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only
|
||||
* Use Trinamic's ultra quiet stepping mode.
|
||||
|
|
@ -3134,6 +3160,8 @@
|
|||
//#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
|
||||
//#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
|
||||
|
||||
// @section tmc/status
|
||||
|
||||
/**
|
||||
* Monitor Trinamic drivers
|
||||
* for error conditions like overtemperature and short to ground.
|
||||
|
|
@ -3153,6 +3181,8 @@
|
|||
#define STOP_ON_ERROR
|
||||
#endif
|
||||
|
||||
// @section tmc/hybrid
|
||||
|
||||
/**
|
||||
* TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only
|
||||
* The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD.
|
||||
|
|
@ -3209,6 +3239,7 @@
|
|||
* homing and adds a guard period for endstop triggering.
|
||||
*
|
||||
* Comment *_STALL_SENSITIVITY to disable sensorless homing for that axis.
|
||||
* @section tmc/stallguard
|
||||
*/
|
||||
//#define SENSORLESS_HOMING // StallGuard capable drivers only
|
||||
|
||||
|
|
@ -3232,6 +3263,8 @@
|
|||
//#define IMPROVE_HOMING_RELIABILITY
|
||||
#endif
|
||||
|
||||
// @section tmc/config
|
||||
|
||||
/**
|
||||
* TMC Homing stepper phase.
|
||||
*
|
||||
|
|
@ -3312,7 +3345,7 @@
|
|||
#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave
|
||||
#endif
|
||||
|
||||
// @section extras
|
||||
// @section photo
|
||||
|
||||
/**
|
||||
* Photo G-code
|
||||
|
|
@ -3355,6 +3388,8 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
// @section cnc
|
||||
|
||||
/**
|
||||
* Spindle & Laser control
|
||||
*
|
||||
|
|
@ -3559,6 +3594,8 @@
|
|||
#define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
|
||||
#endif
|
||||
|
||||
// @section filament width
|
||||
|
||||
/**
|
||||
* Filament Width Sensor
|
||||
*
|
||||
|
|
@ -3592,6 +3629,8 @@
|
|||
//#define FILAMENT_LCD_DISPLAY
|
||||
#endif
|
||||
|
||||
// @section power
|
||||
|
||||
/**
|
||||
* Power Monitor
|
||||
* Monitor voltage (V) and/or current (A), and -when possible- power (W)
|
||||
|
|
@ -3615,6 +3654,8 @@
|
|||
#define POWER_MONITOR_VOLTAGE_OFFSET 0 // Offset (in volts) applied to the calculated voltage
|
||||
#endif
|
||||
|
||||
// @section safety
|
||||
|
||||
/**
|
||||
* Stepper Driver Anti-SNAFU Protection
|
||||
*
|
||||
|
|
@ -3624,6 +3665,8 @@
|
|||
*/
|
||||
//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
|
||||
|
||||
// @section cnc
|
||||
|
||||
/**
|
||||
* CNC Coordinate Systems
|
||||
*
|
||||
|
|
@ -3640,6 +3683,8 @@
|
|||
*/
|
||||
//#define CNC_DRILLING_CYCLE
|
||||
|
||||
// @section reporting
|
||||
|
||||
/**
|
||||
* Auto-report fan speed with M123 S<seconds>
|
||||
* Requires fans with tachometer pins
|
||||
|
|
@ -3667,6 +3712,8 @@
|
|||
//#define M115_GEOMETRY_REPORT
|
||||
#endif
|
||||
|
||||
// @section security
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
|
|
@ -3674,6 +3721,8 @@
|
|||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
// @section volumetrics
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
|
|
@ -3702,14 +3751,7 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Enable this option for a leaner build of Marlin that removes all
|
||||
* workspace offsets, simplifying coordinate transformations, leveling, etc.
|
||||
*
|
||||
* - M206 and M428 are disabled.
|
||||
* - G92 will revert to its behavior from Marlin 1.0.
|
||||
*/
|
||||
#define NO_WORKSPACE_OFFSETS
|
||||
// @section reporting
|
||||
|
||||
// Extra options for the M114 "Current Position" report
|
||||
//#define M114_DETAIL // Use 'M114` for details to check planner calculations
|
||||
|
|
@ -3718,6 +3760,8 @@
|
|||
|
||||
//#define REPORT_FAN_CHANGE // Report the new fan speed when changed by M106 (and others)
|
||||
|
||||
// @section gcode
|
||||
|
||||
/**
|
||||
* Spend 28 bytes of SRAM to optimize the G-code parser
|
||||
*/
|
||||
|
|
@ -3735,6 +3779,15 @@
|
|||
|
||||
//#define REPETIER_GCODE_M360 // Add commands originally from Repetier FW
|
||||
|
||||
/**
|
||||
* Enable this option for a leaner build of Marlin that removes all
|
||||
* workspace offsets, simplifying coordinate transformations, leveling, etc.
|
||||
*
|
||||
* - M206 and M428 are disabled.
|
||||
* - G92 will revert to its behavior from Marlin 1.0.
|
||||
*/
|
||||
#define NO_WORKSPACE_OFFSETS
|
||||
|
||||
/**
|
||||
* CNC G-code options
|
||||
* Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.
|
||||
|
|
@ -3751,6 +3804,8 @@
|
|||
#endif
|
||||
//#define G0_ANGULAR_FEEDRATE 2700 // (°/min)
|
||||
|
||||
// @section gcode
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
|
|
@ -3775,6 +3830,8 @@
|
|||
* Up to 25 may be defined, but the actual number is LCD-dependent.
|
||||
*/
|
||||
|
||||
// @section custom main menu
|
||||
|
||||
// Custom Menu: Main Menu
|
||||
//#define CUSTOM_MENU_MAIN
|
||||
#if ENABLED(CUSTOM_MENU_MAIN)
|
||||
|
|
@ -3805,6 +3862,8 @@
|
|||
//#define MAIN_MENU_ITEM_5_CONFIRM
|
||||
#endif
|
||||
|
||||
// @section custom config menu
|
||||
|
||||
// Custom Menu: Configuration Menu
|
||||
//#define CUSTOM_MENU_CONFIG
|
||||
#if ENABLED(CUSTOM_MENU_CONFIG)
|
||||
|
|
@ -3835,6 +3894,8 @@
|
|||
//#define CONFIG_MENU_ITEM_5_CONFIRM
|
||||
#endif
|
||||
|
||||
// @section custom buttons
|
||||
|
||||
/**
|
||||
* User-defined buttons to run custom G-code.
|
||||
* Up to 25 may be defined.
|
||||
|
|
@ -3866,6 +3927,8 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
// @section host
|
||||
|
||||
/**
|
||||
* Host Action Commands
|
||||
*
|
||||
|
|
@ -3891,6 +3954,8 @@
|
|||
//#define HOST_SHUTDOWN_MENU_ITEM // Add a menu item that tells the host to shut down
|
||||
#endif
|
||||
|
||||
// @section extras
|
||||
|
||||
/**
|
||||
* Cancel Objects
|
||||
*
|
||||
|
|
@ -3912,6 +3977,7 @@
|
|||
* Alternative Supplier: https://reliabuild3d.com/
|
||||
*
|
||||
* Reliabuild encoders have been modified to improve reliability.
|
||||
* @section i2c encoders
|
||||
*/
|
||||
|
||||
//#define I2C_POSITION_ENCODERS
|
||||
|
|
@ -3983,6 +4049,7 @@
|
|||
|
||||
/**
|
||||
* Analog Joystick(s)
|
||||
* @section joystick
|
||||
*/
|
||||
//#define JOYSTICK
|
||||
#if ENABLED(JOYSTICK)
|
||||
|
|
@ -4007,6 +4074,7 @@
|
|||
* Modern replacement for the Prusa TMC_Z_CALIBRATION.
|
||||
* Adds capability to work with any adjustable current drivers.
|
||||
* Implemented as G34 because M915 is deprecated.
|
||||
* @section calibrate
|
||||
*/
|
||||
//#define MECHANICAL_GANTRY_CALIBRATION
|
||||
#if ENABLED(MECHANICAL_GANTRY_CALIBRATION)
|
||||
|
|
@ -4024,6 +4092,7 @@
|
|||
/**
|
||||
* Instant freeze / unfreeze functionality
|
||||
* Potentially useful for emergency stop that allows being resumed.
|
||||
* @section interface
|
||||
*/
|
||||
//#define FREEZE_FEATURE
|
||||
#if ENABLED(FREEZE_FEATURE)
|
||||
|
|
@ -4036,6 +4105,7 @@
|
|||
*
|
||||
* Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display.
|
||||
* Requires 3 signal wires. Some useful debug options are included to demonstrate its usage.
|
||||
* @section debug matrix
|
||||
*/
|
||||
//#define MAX7219_DEBUG
|
||||
#if ENABLED(MAX7219_DEBUG)
|
||||
|
|
@ -4074,6 +4144,7 @@
|
|||
* Support for Synchronized Z moves when used with NanoDLP. G0/G1 axis moves will
|
||||
* output a "Z_move_comp" string to enable synchronization with DLP projector exposure.
|
||||
* This feature allows you to use [[WaitForDoneMessage]] instead of M400 commands.
|
||||
* @section nanodlp
|
||||
*/
|
||||
//#define NANODLP_Z_SYNC
|
||||
#if ENABLED(NANODLP_Z_SYNC)
|
||||
|
|
@ -4082,6 +4153,7 @@
|
|||
|
||||
/**
|
||||
* Ethernet. Use M552 to enable and set the IP address.
|
||||
* @section network
|
||||
*/
|
||||
#if HAS_ETHERNET
|
||||
#define MAC_ADDRESS { 0xDE, 0xAD, 0xBE, 0xEF, 0xF0, 0x0D } // A MAC address unique to your network
|
||||
|
|
@ -4109,6 +4181,8 @@
|
|||
//#include "Configuration_Secure.h" // External file with WiFi SSID / Password
|
||||
#endif
|
||||
|
||||
// @section multi-material
|
||||
|
||||
/**
|
||||
* Průša Multi-Material Unit (MMU)
|
||||
* Enable in Configuration.h
|
||||
|
|
@ -4216,6 +4290,7 @@
|
|||
|
||||
/**
|
||||
* Advanced Print Counter settings
|
||||
* @section stats
|
||||
*/
|
||||
#if ENABLED(PRINTCOUNTER)
|
||||
#define SERVICE_WARNING_BUZZES 3
|
||||
|
|
|
|||
|
|
@ -114,6 +114,7 @@
|
|||
* :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
|
||||
*/
|
||||
#define BAUDRATE 250000
|
||||
|
||||
//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate
|
||||
|
||||
/**
|
||||
|
|
@ -122,7 +123,7 @@
|
|||
* :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
//#define SERIAL_PORT_2 -1
|
||||
//#define BAUDRATE_2 250000 // Enable to override BAUDRATE
|
||||
//#define BAUDRATE_2 250000 // :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] Enable to override BAUDRATE
|
||||
|
||||
/**
|
||||
* Select a third serial port on the board to use for communication with the host.
|
||||
|
|
@ -130,7 +131,7 @@
|
|||
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
//#define SERIAL_PORT_3 1
|
||||
//#define BAUDRATE_3 250000 // Enable to override BAUDRATE
|
||||
//#define BAUDRATE_3 250000 // :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] Enable to override BAUDRATE
|
||||
|
||||
// Enable the Bluetooth serial interface on AT90USB devices
|
||||
//#define BLUETOOTH
|
||||
|
|
@ -389,7 +390,7 @@
|
|||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
// @section psu control
|
||||
|
||||
/**
|
||||
* Power Supply Control
|
||||
|
|
@ -625,6 +626,8 @@
|
|||
//============================= PID Settings ================================
|
||||
//===========================================================================
|
||||
|
||||
// @section hotend temp
|
||||
|
||||
// Enable PIDTEMP for PID control or MPCTEMP for Predictive Model.
|
||||
// temperature control. Disable both for bang-bang heating.
|
||||
#define PIDTEMP // See the PID Tuning Guide at https://reprap.org/wiki/PID_Tuning
|
||||
|
|
@ -635,7 +638,8 @@
|
|||
#define PID_K1 0.95 // Smoothing factor within any PID loop
|
||||
|
||||
#if ENABLED(PIDTEMP)
|
||||
//#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders)
|
||||
//#define PID_DEBUG // Print PID debug data to the serial port. Use 'M303 D' to toggle activation.
|
||||
//#define PID_PARAMS_PER_HOTEND // Use separate PID parameters for each extruder (useful for mismatched extruders)
|
||||
// Set/get with G-code: M301 E[extruder number, 0-2]
|
||||
|
||||
// A10M [@thinkyhead]
|
||||
|
|
@ -658,6 +662,7 @@
|
|||
* Use a physical model of the hotend to control temperature. When configured correctly
|
||||
* this gives better responsiveness and stability than PID and it also removes the need
|
||||
* for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model.
|
||||
* @section mpctemp
|
||||
*/
|
||||
#if ENABLED(MPCTEMP)
|
||||
//#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash)
|
||||
|
|
@ -725,7 +730,7 @@
|
|||
|
||||
#if ENABLED(PIDTEMPBED)
|
||||
//#define MIN_BED_POWER 0
|
||||
//#define PID_BED_DEBUG // Sends debug data to the serial port.
|
||||
//#define PID_BED_DEBUG // Print Bed PID debug data to the serial port.
|
||||
|
||||
// MeCreator2 generated by Autotune
|
||||
#define DEFAULT_bedKp 182.46 // 175.68 189.95
|
||||
|
|
@ -752,6 +757,7 @@
|
|||
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 200W
|
||||
* heater. If your configuration is significantly different than this and you don't understand
|
||||
* the issues involved, don't use chamber PID until someone else verifies that your hardware works.
|
||||
* @section chamber temp
|
||||
*/
|
||||
//#define PIDTEMPCHAMBER
|
||||
//#define CHAMBER_LIMIT_SWITCHING
|
||||
|
|
@ -766,7 +772,7 @@
|
|||
|
||||
#if ENABLED(PIDTEMPCHAMBER)
|
||||
#define MIN_CHAMBER_POWER 0
|
||||
//#define PID_CHAMBER_DEBUG // Sends debug data to the serial port.
|
||||
//#define PID_CHAMBER_DEBUG // Print Chamber PID debug data to the serial port.
|
||||
|
||||
// Lasko "MyHeat Personal Heater" (200w) modified with a Fotek SSR-10DA to control only the heating element
|
||||
// and placed inside the small Creality printer enclosure tent.
|
||||
|
|
@ -780,7 +786,6 @@
|
|||
#endif // PIDTEMPCHAMBER
|
||||
|
||||
#if ANY(PIDTEMP, PIDTEMPBED, PIDTEMPCHAMBER)
|
||||
//#define PID_DEBUG // Sends debug data to the serial port. Use 'M303 D' to toggle activation.
|
||||
//#define PID_OPENLOOP // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX
|
||||
//#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay
|
||||
#define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature
|
||||
|
|
@ -790,7 +795,7 @@
|
|||
#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of flash)
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
// @section safety
|
||||
|
||||
/**
|
||||
* Prevent extrusion if the temperature is below EXTRUDE_MINTEMP.
|
||||
|
|
@ -858,6 +863,8 @@
|
|||
#define POLAR_SEGMENTS_PER_SECOND 5
|
||||
#endif
|
||||
|
||||
// @section delta
|
||||
|
||||
// Enable for DELTA kinematics and configure below
|
||||
//#define DELTA
|
||||
#if ENABLED(DELTA)
|
||||
|
|
@ -917,6 +924,8 @@
|
|||
//#define DELTA_DIAGONAL_ROD_TRIM_TOWER { 0.0, 0.0, 0.0 }
|
||||
#endif
|
||||
|
||||
// @section scara
|
||||
|
||||
/**
|
||||
* MORGAN_SCARA was developed by QHARLEY in South Africa in 2012-2013.
|
||||
* Implemented and slightly reworked by JCERNY in June, 2014.
|
||||
|
|
@ -960,6 +969,8 @@
|
|||
|
||||
#endif
|
||||
|
||||
// @section tpara
|
||||
|
||||
// Enable for TPARA kinematics and configure below
|
||||
//#define AXEL_TPARA
|
||||
#if ENABLED(AXEL_TPARA)
|
||||
|
|
@ -986,6 +997,8 @@
|
|||
#define PSI_HOMING_OFFSET 0
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
|
|
@ -997,7 +1010,7 @@
|
|||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
||||
// @section homing
|
||||
// @section endstops
|
||||
|
||||
// Specify here all the endstop connectors that are connected to any endstop or probe.
|
||||
// Almost all printers will be using one per axis. Probes will use one or more of the
|
||||
|
|
@ -1665,7 +1678,7 @@
|
|||
//#define V_HOME_DIR -1
|
||||
//#define W_HOME_DIR -1
|
||||
|
||||
// @section machine
|
||||
// @section geometry
|
||||
|
||||
// The size of the printable area
|
||||
#define X_BED_SIZE 230
|
||||
|
|
@ -2127,7 +2140,7 @@
|
|||
//============================= Additional Features ===========================
|
||||
//=============================================================================
|
||||
|
||||
// @section extras
|
||||
// @section eeprom
|
||||
|
||||
/**
|
||||
* EEPROM
|
||||
|
|
@ -2147,6 +2160,8 @@
|
|||
//#define EEPROM_INIT_NOW // Init EEPROM on first boot after a new build.
|
||||
#endif
|
||||
|
||||
// @section host
|
||||
|
||||
//
|
||||
// Host Keepalive
|
||||
//
|
||||
|
|
@ -2157,6 +2172,8 @@
|
|||
#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113.
|
||||
#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating
|
||||
|
||||
// @section units
|
||||
|
||||
//
|
||||
// G20/G21 Inch mode support
|
||||
//
|
||||
|
|
@ -2184,6 +2201,8 @@
|
|||
#define PREHEAT_2_TEMP_CHAMBER 35
|
||||
#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
|
||||
|
||||
// @section motion
|
||||
|
||||
/**
|
||||
* Nozzle Park
|
||||
*
|
||||
|
|
@ -2282,6 +2301,8 @@
|
|||
|
||||
#endif
|
||||
|
||||
// @section host
|
||||
|
||||
/**
|
||||
* Print Job Timer
|
||||
*
|
||||
|
|
@ -2308,6 +2329,8 @@
|
|||
*/
|
||||
#define PRINTJOB_TIMER_AUTOSTART
|
||||
|
||||
// @section stats
|
||||
|
||||
/**
|
||||
* Print Counter
|
||||
*
|
||||
|
|
@ -2325,6 +2348,8 @@
|
|||
#define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print
|
||||
#endif
|
||||
|
||||
// @section security
|
||||
|
||||
/**
|
||||
* Password
|
||||
*
|
||||
|
|
@ -2360,7 +2385,7 @@
|
|||
//============================= LCD and SD support ============================
|
||||
//=============================================================================
|
||||
|
||||
// @section lcd
|
||||
// @section interface
|
||||
|
||||
/**
|
||||
* LCD LANGUAGE
|
||||
|
|
@ -2516,6 +2541,7 @@
|
|||
//======================== LCD / Controller Selection =========================
|
||||
//======================== (Character-based LCDs) =========================
|
||||
//=============================================================================
|
||||
// @section lcd
|
||||
|
||||
//
|
||||
// RepRapDiscount Smart Controller.
|
||||
|
|
@ -3161,7 +3187,7 @@
|
|||
//=============================== Extra Features ==============================
|
||||
//=============================================================================
|
||||
|
||||
// @section extras
|
||||
// @section fans
|
||||
|
||||
// Set number of user-controlled fans. Disable to use all board-defined fans.
|
||||
// :[1,2,3,4,5,6,7,8]
|
||||
|
|
@ -3185,14 +3211,18 @@
|
|||
// duty cycle is attained.
|
||||
//#define SOFT_PWM_DITHER
|
||||
|
||||
// @section extras
|
||||
|
||||
// Support for the BariCUDA Paste Extruder
|
||||
//#define BARICUDA
|
||||
|
||||
// @section lights
|
||||
|
||||
// Temperature status LEDs that display the hotend and bed temperature.
|
||||
// If all hotends, bed temperature, and target temperature are under 54C
|
||||
// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis)
|
||||
//#define TEMP_STAT_LEDS
|
||||
|
||||
// Support for the BariCUDA Paste Extruder
|
||||
//#define BARICUDA
|
||||
|
||||
// Support for BlinkM/CyzRgb
|
||||
//#define BLINKM
|
||||
|
||||
|
|
@ -3278,6 +3308,8 @@
|
|||
#define PRINTER_EVENT_LEDS
|
||||
#endif
|
||||
|
||||
// @section servos
|
||||
|
||||
/**
|
||||
* Number of servos
|
||||
*
|
||||
|
|
|
|||
|
|
@ -32,6 +32,24 @@
|
|||
*/
|
||||
#define CONFIGURATION_ADV_H_VERSION 02010100
|
||||
|
||||
// @section develop
|
||||
|
||||
/**
|
||||
* Configuration Dump to JSON and INI format
|
||||
*
|
||||
* Dump the configuration as part of the build. (See signature.py)
|
||||
* Output files are saved with the build (e.g., .pio/build/mega2560).
|
||||
*
|
||||
* See `build_all_examples --ini` as an example of config.ini archiving.
|
||||
*
|
||||
* 1 = marlin_config.json - Dictionary containing the configuration.
|
||||
* This file is also generated for CONFIGURATION_EMBEDDING.
|
||||
* 2 = config.ini - File format for PlatformIO preprocessing.
|
||||
* 3 = schema.json - The entire configuration schema. (13 = pattern groups)
|
||||
* 4 = schema.yml - The entire configuration schema.
|
||||
*/
|
||||
//#define CONFIG_DUMP // :[1:'JSON', 2:'config.ini', 3:'schema.json', 4:'schema.yml']
|
||||
|
||||
//===========================================================================
|
||||
//============================= Thermal Settings ============================
|
||||
//===========================================================================
|
||||
|
|
@ -2558,6 +2576,8 @@
|
|||
#endif
|
||||
#endif // HAS_MULTI_EXTRUDER
|
||||
|
||||
// @section advanced pause
|
||||
|
||||
/**
|
||||
* Advanced Pause for Filament Change
|
||||
* - Adds the G-code M600 Filament Change to initiate a filament change.
|
||||
|
|
@ -2616,13 +2636,12 @@
|
|||
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
|
||||
#endif
|
||||
|
||||
// @section tmc
|
||||
|
||||
/**
|
||||
* TMC26X Stepper Driver options
|
||||
*
|
||||
* The TMC26XStepper library is required for this stepper driver.
|
||||
* https://github.com/trinamic/TMC26XStepper
|
||||
* @section tmc/tmc26x
|
||||
*/
|
||||
#if HAS_DRIVER(TMC26X)
|
||||
|
||||
|
|
@ -2760,8 +2779,6 @@
|
|||
|
||||
#endif // TMC26X
|
||||
|
||||
// @section tmc_smart
|
||||
|
||||
/**
|
||||
* To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode
|
||||
* connect your SPI pins to the hardware SPI interface on your board and define
|
||||
|
|
@ -2777,6 +2794,7 @@
|
|||
*
|
||||
* TMCStepper library is required to use TMC stepper drivers.
|
||||
* https://github.com/teemuatlut/TMCStepper
|
||||
* @section tmc/config
|
||||
*/
|
||||
#if HAS_TRINAMIC_CONFIG
|
||||
|
||||
|
|
@ -3000,6 +3018,8 @@
|
|||
//#define E7_HOLD_MULTIPLIER 0.5
|
||||
#endif
|
||||
|
||||
// @section tmc/spi
|
||||
|
||||
/**
|
||||
* Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here.
|
||||
* The default pins can be found in your board's pins file.
|
||||
|
|
@ -3037,6 +3057,8 @@
|
|||
//#define TMC_SW_MISO -1
|
||||
//#define TMC_SW_SCK -1
|
||||
|
||||
// @section tmc/serial
|
||||
|
||||
/**
|
||||
* Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
|
||||
* Set the address using jumpers on pins MS1 and MS2.
|
||||
|
|
@ -3072,6 +3094,8 @@
|
|||
//#define E6_SLAVE_ADDRESS 0
|
||||
//#define E7_SLAVE_ADDRESS 0
|
||||
|
||||
// @section tmc/smart
|
||||
|
||||
/**
|
||||
* Software enable
|
||||
*
|
||||
|
|
@ -3080,6 +3104,8 @@
|
|||
*/
|
||||
//#define SOFTWARE_DRIVER_ENABLE
|
||||
|
||||
// @section tmc/stealthchop
|
||||
|
||||
/**
|
||||
* TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only
|
||||
* Use Trinamic's ultra quiet stepping mode.
|
||||
|
|
@ -3134,6 +3160,8 @@
|
|||
//#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
|
||||
//#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
|
||||
|
||||
// @section tmc/status
|
||||
|
||||
/**
|
||||
* Monitor Trinamic drivers
|
||||
* for error conditions like overtemperature and short to ground.
|
||||
|
|
@ -3153,6 +3181,8 @@
|
|||
#define STOP_ON_ERROR
|
||||
#endif
|
||||
|
||||
// @section tmc/hybrid
|
||||
|
||||
/**
|
||||
* TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only
|
||||
* The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD.
|
||||
|
|
@ -3209,6 +3239,7 @@
|
|||
* homing and adds a guard period for endstop triggering.
|
||||
*
|
||||
* Comment *_STALL_SENSITIVITY to disable sensorless homing for that axis.
|
||||
* @section tmc/stallguard
|
||||
*/
|
||||
//#define SENSORLESS_HOMING // StallGuard capable drivers only
|
||||
|
||||
|
|
@ -3232,6 +3263,8 @@
|
|||
//#define IMPROVE_HOMING_RELIABILITY
|
||||
#endif
|
||||
|
||||
// @section tmc/config
|
||||
|
||||
/**
|
||||
* TMC Homing stepper phase.
|
||||
*
|
||||
|
|
@ -3312,7 +3345,7 @@
|
|||
#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave
|
||||
#endif
|
||||
|
||||
// @section extras
|
||||
// @section photo
|
||||
|
||||
/**
|
||||
* Photo G-code
|
||||
|
|
@ -3355,6 +3388,8 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
// @section cnc
|
||||
|
||||
/**
|
||||
* Spindle & Laser control
|
||||
*
|
||||
|
|
@ -3559,6 +3594,8 @@
|
|||
#define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
|
||||
#endif
|
||||
|
||||
// @section filament width
|
||||
|
||||
/**
|
||||
* Filament Width Sensor
|
||||
*
|
||||
|
|
@ -3592,6 +3629,8 @@
|
|||
//#define FILAMENT_LCD_DISPLAY
|
||||
#endif
|
||||
|
||||
// @section power
|
||||
|
||||
/**
|
||||
* Power Monitor
|
||||
* Monitor voltage (V) and/or current (A), and -when possible- power (W)
|
||||
|
|
@ -3615,6 +3654,8 @@
|
|||
#define POWER_MONITOR_VOLTAGE_OFFSET 0 // Offset (in volts) applied to the calculated voltage
|
||||
#endif
|
||||
|
||||
// @section safety
|
||||
|
||||
/**
|
||||
* Stepper Driver Anti-SNAFU Protection
|
||||
*
|
||||
|
|
@ -3624,6 +3665,8 @@
|
|||
*/
|
||||
//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
|
||||
|
||||
// @section cnc
|
||||
|
||||
/**
|
||||
* CNC Coordinate Systems
|
||||
*
|
||||
|
|
@ -3640,6 +3683,8 @@
|
|||
*/
|
||||
//#define CNC_DRILLING_CYCLE
|
||||
|
||||
// @section reporting
|
||||
|
||||
/**
|
||||
* Auto-report fan speed with M123 S<seconds>
|
||||
* Requires fans with tachometer pins
|
||||
|
|
@ -3667,6 +3712,8 @@
|
|||
//#define M115_GEOMETRY_REPORT
|
||||
#endif
|
||||
|
||||
// @section security
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
|
|
@ -3674,6 +3721,8 @@
|
|||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
// @section volumetrics
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
|
|
@ -3702,14 +3751,7 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Enable this option for a leaner build of Marlin that removes all
|
||||
* workspace offsets, simplifying coordinate transformations, leveling, etc.
|
||||
*
|
||||
* - M206 and M428 are disabled.
|
||||
* - G92 will revert to its behavior from Marlin 1.0.
|
||||
*/
|
||||
//#define NO_WORKSPACE_OFFSETS
|
||||
// @section reporting
|
||||
|
||||
// Extra options for the M114 "Current Position" report
|
||||
//#define M114_DETAIL // Use 'M114` for details to check planner calculations
|
||||
|
|
@ -3718,6 +3760,8 @@
|
|||
|
||||
//#define REPORT_FAN_CHANGE // Report the new fan speed when changed by M106 (and others)
|
||||
|
||||
// @section gcode
|
||||
|
||||
/**
|
||||
* Spend 28 bytes of SRAM to optimize the G-code parser
|
||||
*/
|
||||
|
|
@ -3735,6 +3779,15 @@
|
|||
|
||||
//#define REPETIER_GCODE_M360 // Add commands originally from Repetier FW
|
||||
|
||||
/**
|
||||
* Enable this option for a leaner build of Marlin that removes all
|
||||
* workspace offsets, simplifying coordinate transformations, leveling, etc.
|
||||
*
|
||||
* - M206 and M428 are disabled.
|
||||
* - G92 will revert to its behavior from Marlin 1.0.
|
||||
*/
|
||||
//#define NO_WORKSPACE_OFFSETS
|
||||
|
||||
/**
|
||||
* CNC G-code options
|
||||
* Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.
|
||||
|
|
@ -3751,6 +3804,8 @@
|
|||
#endif
|
||||
//#define G0_ANGULAR_FEEDRATE 2700 // (°/min)
|
||||
|
||||
// @section gcode
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
|
|
@ -3775,6 +3830,8 @@
|
|||
* Up to 25 may be defined, but the actual number is LCD-dependent.
|
||||
*/
|
||||
|
||||
// @section custom main menu
|
||||
|
||||
// Custom Menu: Main Menu
|
||||
//#define CUSTOM_MENU_MAIN
|
||||
#if ENABLED(CUSTOM_MENU_MAIN)
|
||||
|
|
@ -3805,6 +3862,8 @@
|
|||
//#define MAIN_MENU_ITEM_5_CONFIRM
|
||||
#endif
|
||||
|
||||
// @section custom config menu
|
||||
|
||||
// Custom Menu: Configuration Menu
|
||||
//#define CUSTOM_MENU_CONFIG
|
||||
#if ENABLED(CUSTOM_MENU_CONFIG)
|
||||
|
|
@ -3835,6 +3894,8 @@
|
|||
//#define CONFIG_MENU_ITEM_5_CONFIRM
|
||||
#endif
|
||||
|
||||
// @section custom buttons
|
||||
|
||||
/**
|
||||
* User-defined buttons to run custom G-code.
|
||||
* Up to 25 may be defined.
|
||||
|
|
@ -3866,6 +3927,8 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
// @section host
|
||||
|
||||
/**
|
||||
* Host Action Commands
|
||||
*
|
||||
|
|
@ -3891,6 +3954,8 @@
|
|||
//#define HOST_SHUTDOWN_MENU_ITEM // Add a menu item that tells the host to shut down
|
||||
#endif
|
||||
|
||||
// @section extras
|
||||
|
||||
/**
|
||||
* Cancel Objects
|
||||
*
|
||||
|
|
@ -3912,6 +3977,7 @@
|
|||
* Alternative Supplier: https://reliabuild3d.com/
|
||||
*
|
||||
* Reliabuild encoders have been modified to improve reliability.
|
||||
* @section i2c encoders
|
||||
*/
|
||||
|
||||
//#define I2C_POSITION_ENCODERS
|
||||
|
|
@ -3983,6 +4049,7 @@
|
|||
|
||||
/**
|
||||
* Analog Joystick(s)
|
||||
* @section joystick
|
||||
*/
|
||||
//#define JOYSTICK
|
||||
#if ENABLED(JOYSTICK)
|
||||
|
|
@ -4007,6 +4074,7 @@
|
|||
* Modern replacement for the Prusa TMC_Z_CALIBRATION.
|
||||
* Adds capability to work with any adjustable current drivers.
|
||||
* Implemented as G34 because M915 is deprecated.
|
||||
* @section calibrate
|
||||
*/
|
||||
//#define MECHANICAL_GANTRY_CALIBRATION
|
||||
#if ENABLED(MECHANICAL_GANTRY_CALIBRATION)
|
||||
|
|
@ -4024,6 +4092,7 @@
|
|||
/**
|
||||
* Instant freeze / unfreeze functionality
|
||||
* Potentially useful for emergency stop that allows being resumed.
|
||||
* @section interface
|
||||
*/
|
||||
//#define FREEZE_FEATURE
|
||||
#if ENABLED(FREEZE_FEATURE)
|
||||
|
|
@ -4036,6 +4105,7 @@
|
|||
*
|
||||
* Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display.
|
||||
* Requires 3 signal wires. Some useful debug options are included to demonstrate its usage.
|
||||
* @section debug matrix
|
||||
*/
|
||||
//#define MAX7219_DEBUG
|
||||
#if ENABLED(MAX7219_DEBUG)
|
||||
|
|
@ -4074,6 +4144,7 @@
|
|||
* Support for Synchronized Z moves when used with NanoDLP. G0/G1 axis moves will
|
||||
* output a "Z_move_comp" string to enable synchronization with DLP projector exposure.
|
||||
* This feature allows you to use [[WaitForDoneMessage]] instead of M400 commands.
|
||||
* @section nanodlp
|
||||
*/
|
||||
//#define NANODLP_Z_SYNC
|
||||
#if ENABLED(NANODLP_Z_SYNC)
|
||||
|
|
@ -4082,6 +4153,7 @@
|
|||
|
||||
/**
|
||||
* Ethernet. Use M552 to enable and set the IP address.
|
||||
* @section network
|
||||
*/
|
||||
#if HAS_ETHERNET
|
||||
#define MAC_ADDRESS { 0xDE, 0xAD, 0xBE, 0xEF, 0xF0, 0x0D } // A MAC address unique to your network
|
||||
|
|
@ -4109,6 +4181,8 @@
|
|||
//#include "Configuration_Secure.h" // External file with WiFi SSID / Password
|
||||
#endif
|
||||
|
||||
// @section multi-material
|
||||
|
||||
/**
|
||||
* Průša Multi-Material Unit (MMU)
|
||||
* Enable in Configuration.h
|
||||
|
|
@ -4216,6 +4290,7 @@
|
|||
|
||||
/**
|
||||
* Advanced Print Counter settings
|
||||
* @section stats
|
||||
*/
|
||||
#if ENABLED(PRINTCOUNTER)
|
||||
#define SERVICE_WARNING_BUZZES 3
|
||||
|
|
|
|||
|
|
@ -114,6 +114,7 @@
|
|||
* :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
|
||||
*/
|
||||
#define BAUDRATE 250000
|
||||
|
||||
//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate
|
||||
|
||||
/**
|
||||
|
|
@ -122,7 +123,7 @@
|
|||
* :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
//#define SERIAL_PORT_2 -1
|
||||
//#define BAUDRATE_2 250000 // Enable to override BAUDRATE
|
||||
//#define BAUDRATE_2 250000 // :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] Enable to override BAUDRATE
|
||||
|
||||
/**
|
||||
* Select a third serial port on the board to use for communication with the host.
|
||||
|
|
@ -130,7 +131,7 @@
|
|||
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
//#define SERIAL_PORT_3 1
|
||||
//#define BAUDRATE_3 250000 // Enable to override BAUDRATE
|
||||
//#define BAUDRATE_3 250000 // :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] Enable to override BAUDRATE
|
||||
|
||||
// Enable the Bluetooth serial interface on AT90USB devices
|
||||
//#define BLUETOOTH
|
||||
|
|
@ -389,7 +390,7 @@
|
|||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
// @section psu control
|
||||
|
||||
/**
|
||||
* Power Supply Control
|
||||
|
|
@ -625,6 +626,8 @@
|
|||
//============================= PID Settings ================================
|
||||
//===========================================================================
|
||||
|
||||
// @section hotend temp
|
||||
|
||||
// Enable PIDTEMP for PID control or MPCTEMP for Predictive Model.
|
||||
// temperature control. Disable both for bang-bang heating.
|
||||
#define PIDTEMP // See the PID Tuning Guide at https://reprap.org/wiki/PID_Tuning
|
||||
|
|
@ -635,7 +638,8 @@
|
|||
#define PID_K1 0.95 // Smoothing factor within any PID loop
|
||||
|
||||
#if ENABLED(PIDTEMP)
|
||||
//#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders)
|
||||
//#define PID_DEBUG // Print PID debug data to the serial port. Use 'M303 D' to toggle activation.
|
||||
//#define PID_PARAMS_PER_HOTEND // Use separate PID parameters for each extruder (useful for mismatched extruders)
|
||||
// Set/get with G-code: M301 E[extruder number, 0-2]
|
||||
|
||||
// A10M [@thinkyhead]
|
||||
|
|
@ -658,6 +662,7 @@
|
|||
* Use a physical model of the hotend to control temperature. When configured correctly
|
||||
* this gives better responsiveness and stability than PID and it also removes the need
|
||||
* for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model.
|
||||
* @section mpctemp
|
||||
*/
|
||||
#if ENABLED(MPCTEMP)
|
||||
//#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash)
|
||||
|
|
@ -725,7 +730,7 @@
|
|||
|
||||
#if ENABLED(PIDTEMPBED)
|
||||
//#define MIN_BED_POWER 0
|
||||
//#define PID_BED_DEBUG // Sends debug data to the serial port.
|
||||
//#define PID_BED_DEBUG // Print Bed PID debug data to the serial port.
|
||||
|
||||
// MeCreator2 generated by Autotune
|
||||
#define DEFAULT_bedKp 182.46 // 175.68 189.95
|
||||
|
|
@ -752,6 +757,7 @@
|
|||
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 200W
|
||||
* heater. If your configuration is significantly different than this and you don't understand
|
||||
* the issues involved, don't use chamber PID until someone else verifies that your hardware works.
|
||||
* @section chamber temp
|
||||
*/
|
||||
//#define PIDTEMPCHAMBER
|
||||
//#define CHAMBER_LIMIT_SWITCHING
|
||||
|
|
@ -766,7 +772,7 @@
|
|||
|
||||
#if ENABLED(PIDTEMPCHAMBER)
|
||||
#define MIN_CHAMBER_POWER 0
|
||||
//#define PID_CHAMBER_DEBUG // Sends debug data to the serial port.
|
||||
//#define PID_CHAMBER_DEBUG // Print Chamber PID debug data to the serial port.
|
||||
|
||||
// Lasko "MyHeat Personal Heater" (200w) modified with a Fotek SSR-10DA to control only the heating element
|
||||
// and placed inside the small Creality printer enclosure tent.
|
||||
|
|
@ -780,7 +786,6 @@
|
|||
#endif // PIDTEMPCHAMBER
|
||||
|
||||
#if ANY(PIDTEMP, PIDTEMPBED, PIDTEMPCHAMBER)
|
||||
//#define PID_DEBUG // Sends debug data to the serial port. Use 'M303 D' to toggle activation.
|
||||
//#define PID_OPENLOOP // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX
|
||||
//#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay
|
||||
#define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature
|
||||
|
|
@ -790,7 +795,7 @@
|
|||
#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of flash)
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
// @section safety
|
||||
|
||||
/**
|
||||
* Prevent extrusion if the temperature is below EXTRUDE_MINTEMP.
|
||||
|
|
@ -858,6 +863,8 @@
|
|||
#define POLAR_SEGMENTS_PER_SECOND 5
|
||||
#endif
|
||||
|
||||
// @section delta
|
||||
|
||||
// Enable for DELTA kinematics and configure below
|
||||
//#define DELTA
|
||||
#if ENABLED(DELTA)
|
||||
|
|
@ -917,6 +924,8 @@
|
|||
//#define DELTA_DIAGONAL_ROD_TRIM_TOWER { 0.0, 0.0, 0.0 }
|
||||
#endif
|
||||
|
||||
// @section scara
|
||||
|
||||
/**
|
||||
* MORGAN_SCARA was developed by QHARLEY in South Africa in 2012-2013.
|
||||
* Implemented and slightly reworked by JCERNY in June, 2014.
|
||||
|
|
@ -960,6 +969,8 @@
|
|||
|
||||
#endif
|
||||
|
||||
// @section tpara
|
||||
|
||||
// Enable for TPARA kinematics and configure below
|
||||
//#define AXEL_TPARA
|
||||
#if ENABLED(AXEL_TPARA)
|
||||
|
|
@ -986,6 +997,8 @@
|
|||
#define PSI_HOMING_OFFSET 0
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
|
|
@ -997,7 +1010,7 @@
|
|||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
||||
// @section homing
|
||||
// @section endstops
|
||||
|
||||
// Specify here all the endstop connectors that are connected to any endstop or probe.
|
||||
// Almost all printers will be using one per axis. Probes will use one or more of the
|
||||
|
|
@ -1667,7 +1680,7 @@
|
|||
//#define V_HOME_DIR -1
|
||||
//#define W_HOME_DIR -1
|
||||
|
||||
// @section machine
|
||||
// @section geometry
|
||||
|
||||
// The size of the printable area
|
||||
#define X_BED_SIZE 230
|
||||
|
|
@ -2130,7 +2143,7 @@
|
|||
//============================= Additional Features ===========================
|
||||
//=============================================================================
|
||||
|
||||
// @section extras
|
||||
// @section eeprom
|
||||
|
||||
/**
|
||||
* EEPROM
|
||||
|
|
@ -2150,6 +2163,8 @@
|
|||
//#define EEPROM_INIT_NOW // Init EEPROM on first boot after a new build.
|
||||
#endif
|
||||
|
||||
// @section host
|
||||
|
||||
//
|
||||
// Host Keepalive
|
||||
//
|
||||
|
|
@ -2160,6 +2175,8 @@
|
|||
#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113.
|
||||
#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating
|
||||
|
||||
// @section units
|
||||
|
||||
//
|
||||
// G20/G21 Inch mode support
|
||||
//
|
||||
|
|
@ -2187,6 +2204,8 @@
|
|||
#define PREHEAT_2_TEMP_CHAMBER 35
|
||||
#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
|
||||
|
||||
// @section motion
|
||||
|
||||
/**
|
||||
* Nozzle Park
|
||||
*
|
||||
|
|
@ -2285,6 +2304,8 @@
|
|||
|
||||
#endif
|
||||
|
||||
// @section host
|
||||
|
||||
/**
|
||||
* Print Job Timer
|
||||
*
|
||||
|
|
@ -2311,6 +2332,8 @@
|
|||
*/
|
||||
#define PRINTJOB_TIMER_AUTOSTART
|
||||
|
||||
// @section stats
|
||||
|
||||
/**
|
||||
* Print Counter
|
||||
*
|
||||
|
|
@ -2328,6 +2351,8 @@
|
|||
#define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print
|
||||
#endif
|
||||
|
||||
// @section security
|
||||
|
||||
/**
|
||||
* Password
|
||||
*
|
||||
|
|
@ -2363,7 +2388,7 @@
|
|||
//============================= LCD and SD support ============================
|
||||
//=============================================================================
|
||||
|
||||
// @section lcd
|
||||
// @section interface
|
||||
|
||||
/**
|
||||
* LCD LANGUAGE
|
||||
|
|
@ -2519,6 +2544,7 @@
|
|||
//======================== LCD / Controller Selection =========================
|
||||
//======================== (Character-based LCDs) =========================
|
||||
//=============================================================================
|
||||
// @section lcd
|
||||
|
||||
//
|
||||
// RepRapDiscount Smart Controller.
|
||||
|
|
@ -3164,7 +3190,7 @@
|
|||
//=============================== Extra Features ==============================
|
||||
//=============================================================================
|
||||
|
||||
// @section extras
|
||||
// @section fans
|
||||
|
||||
// Set number of user-controlled fans. Disable to use all board-defined fans.
|
||||
// :[1,2,3,4,5,6,7,8]
|
||||
|
|
@ -3188,14 +3214,18 @@
|
|||
// duty cycle is attained.
|
||||
//#define SOFT_PWM_DITHER
|
||||
|
||||
// @section extras
|
||||
|
||||
// Support for the BariCUDA Paste Extruder
|
||||
//#define BARICUDA
|
||||
|
||||
// @section lights
|
||||
|
||||
// Temperature status LEDs that display the hotend and bed temperature.
|
||||
// If all hotends, bed temperature, and target temperature are under 54C
|
||||
// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis)
|
||||
//#define TEMP_STAT_LEDS
|
||||
|
||||
// Support for the BariCUDA Paste Extruder
|
||||
//#define BARICUDA
|
||||
|
||||
// Support for BlinkM/CyzRgb
|
||||
//#define BLINKM
|
||||
|
||||
|
|
@ -3281,6 +3311,8 @@
|
|||
#define PRINTER_EVENT_LEDS
|
||||
#endif
|
||||
|
||||
// @section servos
|
||||
|
||||
/**
|
||||
* Number of servos
|
||||
*
|
||||
|
|
|
|||
|
|
@ -32,6 +32,24 @@
|
|||
*/
|
||||
#define CONFIGURATION_ADV_H_VERSION 02010100
|
||||
|
||||
// @section develop
|
||||
|
||||
/**
|
||||
* Configuration Dump to JSON and INI format
|
||||
*
|
||||
* Dump the configuration as part of the build. (See signature.py)
|
||||
* Output files are saved with the build (e.g., .pio/build/mega2560).
|
||||
*
|
||||
* See `build_all_examples --ini` as an example of config.ini archiving.
|
||||
*
|
||||
* 1 = marlin_config.json - Dictionary containing the configuration.
|
||||
* This file is also generated for CONFIGURATION_EMBEDDING.
|
||||
* 2 = config.ini - File format for PlatformIO preprocessing.
|
||||
* 3 = schema.json - The entire configuration schema. (13 = pattern groups)
|
||||
* 4 = schema.yml - The entire configuration schema.
|
||||
*/
|
||||
//#define CONFIG_DUMP // :[1:'JSON', 2:'config.ini', 3:'schema.json', 4:'schema.yml']
|
||||
|
||||
//===========================================================================
|
||||
//============================= Thermal Settings ============================
|
||||
//===========================================================================
|
||||
|
|
@ -2558,6 +2576,8 @@
|
|||
#endif
|
||||
#endif // HAS_MULTI_EXTRUDER
|
||||
|
||||
// @section advanced pause
|
||||
|
||||
/**
|
||||
* Advanced Pause for Filament Change
|
||||
* - Adds the G-code M600 Filament Change to initiate a filament change.
|
||||
|
|
@ -2616,13 +2636,12 @@
|
|||
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
|
||||
#endif
|
||||
|
||||
// @section tmc
|
||||
|
||||
/**
|
||||
* TMC26X Stepper Driver options
|
||||
*
|
||||
* The TMC26XStepper library is required for this stepper driver.
|
||||
* https://github.com/trinamic/TMC26XStepper
|
||||
* @section tmc/tmc26x
|
||||
*/
|
||||
#if HAS_DRIVER(TMC26X)
|
||||
|
||||
|
|
@ -2760,8 +2779,6 @@
|
|||
|
||||
#endif // TMC26X
|
||||
|
||||
// @section tmc_smart
|
||||
|
||||
/**
|
||||
* To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode
|
||||
* connect your SPI pins to the hardware SPI interface on your board and define
|
||||
|
|
@ -2777,6 +2794,7 @@
|
|||
*
|
||||
* TMCStepper library is required to use TMC stepper drivers.
|
||||
* https://github.com/teemuatlut/TMCStepper
|
||||
* @section tmc/config
|
||||
*/
|
||||
#if HAS_TRINAMIC_CONFIG
|
||||
|
||||
|
|
@ -3000,6 +3018,8 @@
|
|||
//#define E7_HOLD_MULTIPLIER 0.5
|
||||
#endif
|
||||
|
||||
// @section tmc/spi
|
||||
|
||||
/**
|
||||
* Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here.
|
||||
* The default pins can be found in your board's pins file.
|
||||
|
|
@ -3037,6 +3057,8 @@
|
|||
//#define TMC_SW_MISO -1
|
||||
//#define TMC_SW_SCK -1
|
||||
|
||||
// @section tmc/serial
|
||||
|
||||
/**
|
||||
* Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
|
||||
* Set the address using jumpers on pins MS1 and MS2.
|
||||
|
|
@ -3072,6 +3094,8 @@
|
|||
//#define E6_SLAVE_ADDRESS 0
|
||||
//#define E7_SLAVE_ADDRESS 0
|
||||
|
||||
// @section tmc/smart
|
||||
|
||||
/**
|
||||
* Software enable
|
||||
*
|
||||
|
|
@ -3080,6 +3104,8 @@
|
|||
*/
|
||||
//#define SOFTWARE_DRIVER_ENABLE
|
||||
|
||||
// @section tmc/stealthchop
|
||||
|
||||
/**
|
||||
* TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only
|
||||
* Use Trinamic's ultra quiet stepping mode.
|
||||
|
|
@ -3134,6 +3160,8 @@
|
|||
//#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
|
||||
//#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
|
||||
|
||||
// @section tmc/status
|
||||
|
||||
/**
|
||||
* Monitor Trinamic drivers
|
||||
* for error conditions like overtemperature and short to ground.
|
||||
|
|
@ -3153,6 +3181,8 @@
|
|||
#define STOP_ON_ERROR
|
||||
#endif
|
||||
|
||||
// @section tmc/hybrid
|
||||
|
||||
/**
|
||||
* TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only
|
||||
* The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD.
|
||||
|
|
@ -3209,6 +3239,7 @@
|
|||
* homing and adds a guard period for endstop triggering.
|
||||
*
|
||||
* Comment *_STALL_SENSITIVITY to disable sensorless homing for that axis.
|
||||
* @section tmc/stallguard
|
||||
*/
|
||||
//#define SENSORLESS_HOMING // StallGuard capable drivers only
|
||||
|
||||
|
|
@ -3232,6 +3263,8 @@
|
|||
//#define IMPROVE_HOMING_RELIABILITY
|
||||
#endif
|
||||
|
||||
// @section tmc/config
|
||||
|
||||
/**
|
||||
* TMC Homing stepper phase.
|
||||
*
|
||||
|
|
@ -3312,7 +3345,7 @@
|
|||
#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave
|
||||
#endif
|
||||
|
||||
// @section extras
|
||||
// @section photo
|
||||
|
||||
/**
|
||||
* Photo G-code
|
||||
|
|
@ -3355,6 +3388,8 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
// @section cnc
|
||||
|
||||
/**
|
||||
* Spindle & Laser control
|
||||
*
|
||||
|
|
@ -3559,6 +3594,8 @@
|
|||
#define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
|
||||
#endif
|
||||
|
||||
// @section filament width
|
||||
|
||||
/**
|
||||
* Filament Width Sensor
|
||||
*
|
||||
|
|
@ -3592,6 +3629,8 @@
|
|||
//#define FILAMENT_LCD_DISPLAY
|
||||
#endif
|
||||
|
||||
// @section power
|
||||
|
||||
/**
|
||||
* Power Monitor
|
||||
* Monitor voltage (V) and/or current (A), and -when possible- power (W)
|
||||
|
|
@ -3615,6 +3654,8 @@
|
|||
#define POWER_MONITOR_VOLTAGE_OFFSET 0 // Offset (in volts) applied to the calculated voltage
|
||||
#endif
|
||||
|
||||
// @section safety
|
||||
|
||||
/**
|
||||
* Stepper Driver Anti-SNAFU Protection
|
||||
*
|
||||
|
|
@ -3624,6 +3665,8 @@
|
|||
*/
|
||||
//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
|
||||
|
||||
// @section cnc
|
||||
|
||||
/**
|
||||
* CNC Coordinate Systems
|
||||
*
|
||||
|
|
@ -3640,6 +3683,8 @@
|
|||
*/
|
||||
//#define CNC_DRILLING_CYCLE
|
||||
|
||||
// @section reporting
|
||||
|
||||
/**
|
||||
* Auto-report fan speed with M123 S<seconds>
|
||||
* Requires fans with tachometer pins
|
||||
|
|
@ -3667,6 +3712,8 @@
|
|||
//#define M115_GEOMETRY_REPORT
|
||||
#endif
|
||||
|
||||
// @section security
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
|
|
@ -3674,6 +3721,8 @@
|
|||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
// @section volumetrics
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
|
|
@ -3702,14 +3751,7 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Enable this option for a leaner build of Marlin that removes all
|
||||
* workspace offsets, simplifying coordinate transformations, leveling, etc.
|
||||
*
|
||||
* - M206 and M428 are disabled.
|
||||
* - G92 will revert to its behavior from Marlin 1.0.
|
||||
*/
|
||||
#define NO_WORKSPACE_OFFSETS
|
||||
// @section reporting
|
||||
|
||||
// Extra options for the M114 "Current Position" report
|
||||
//#define M114_DETAIL // Use 'M114` for details to check planner calculations
|
||||
|
|
@ -3718,6 +3760,8 @@
|
|||
|
||||
//#define REPORT_FAN_CHANGE // Report the new fan speed when changed by M106 (and others)
|
||||
|
||||
// @section gcode
|
||||
|
||||
/**
|
||||
* Spend 28 bytes of SRAM to optimize the G-code parser
|
||||
*/
|
||||
|
|
@ -3735,6 +3779,15 @@
|
|||
|
||||
//#define REPETIER_GCODE_M360 // Add commands originally from Repetier FW
|
||||
|
||||
/**
|
||||
* Enable this option for a leaner build of Marlin that removes all
|
||||
* workspace offsets, simplifying coordinate transformations, leveling, etc.
|
||||
*
|
||||
* - M206 and M428 are disabled.
|
||||
* - G92 will revert to its behavior from Marlin 1.0.
|
||||
*/
|
||||
#define NO_WORKSPACE_OFFSETS
|
||||
|
||||
/**
|
||||
* CNC G-code options
|
||||
* Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.
|
||||
|
|
@ -3751,6 +3804,8 @@
|
|||
#endif
|
||||
//#define G0_ANGULAR_FEEDRATE 2700 // (°/min)
|
||||
|
||||
// @section gcode
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
|
|
@ -3775,6 +3830,8 @@
|
|||
* Up to 25 may be defined, but the actual number is LCD-dependent.
|
||||
*/
|
||||
|
||||
// @section custom main menu
|
||||
|
||||
// Custom Menu: Main Menu
|
||||
//#define CUSTOM_MENU_MAIN
|
||||
#if ENABLED(CUSTOM_MENU_MAIN)
|
||||
|
|
@ -3805,6 +3862,8 @@
|
|||
//#define MAIN_MENU_ITEM_5_CONFIRM
|
||||
#endif
|
||||
|
||||
// @section custom config menu
|
||||
|
||||
// Custom Menu: Configuration Menu
|
||||
//#define CUSTOM_MENU_CONFIG
|
||||
#if ENABLED(CUSTOM_MENU_CONFIG)
|
||||
|
|
@ -3835,6 +3894,8 @@
|
|||
//#define CONFIG_MENU_ITEM_5_CONFIRM
|
||||
#endif
|
||||
|
||||
// @section custom buttons
|
||||
|
||||
/**
|
||||
* User-defined buttons to run custom G-code.
|
||||
* Up to 25 may be defined.
|
||||
|
|
@ -3866,6 +3927,8 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
// @section host
|
||||
|
||||
/**
|
||||
* Host Action Commands
|
||||
*
|
||||
|
|
@ -3891,6 +3954,8 @@
|
|||
//#define HOST_SHUTDOWN_MENU_ITEM // Add a menu item that tells the host to shut down
|
||||
#endif
|
||||
|
||||
// @section extras
|
||||
|
||||
/**
|
||||
* Cancel Objects
|
||||
*
|
||||
|
|
@ -3912,6 +3977,7 @@
|
|||
* Alternative Supplier: https://reliabuild3d.com/
|
||||
*
|
||||
* Reliabuild encoders have been modified to improve reliability.
|
||||
* @section i2c encoders
|
||||
*/
|
||||
|
||||
//#define I2C_POSITION_ENCODERS
|
||||
|
|
@ -3983,6 +4049,7 @@
|
|||
|
||||
/**
|
||||
* Analog Joystick(s)
|
||||
* @section joystick
|
||||
*/
|
||||
//#define JOYSTICK
|
||||
#if ENABLED(JOYSTICK)
|
||||
|
|
@ -4007,6 +4074,7 @@
|
|||
* Modern replacement for the Prusa TMC_Z_CALIBRATION.
|
||||
* Adds capability to work with any adjustable current drivers.
|
||||
* Implemented as G34 because M915 is deprecated.
|
||||
* @section calibrate
|
||||
*/
|
||||
//#define MECHANICAL_GANTRY_CALIBRATION
|
||||
#if ENABLED(MECHANICAL_GANTRY_CALIBRATION)
|
||||
|
|
@ -4024,6 +4092,7 @@
|
|||
/**
|
||||
* Instant freeze / unfreeze functionality
|
||||
* Potentially useful for emergency stop that allows being resumed.
|
||||
* @section interface
|
||||
*/
|
||||
//#define FREEZE_FEATURE
|
||||
#if ENABLED(FREEZE_FEATURE)
|
||||
|
|
@ -4036,6 +4105,7 @@
|
|||
*
|
||||
* Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display.
|
||||
* Requires 3 signal wires. Some useful debug options are included to demonstrate its usage.
|
||||
* @section debug matrix
|
||||
*/
|
||||
//#define MAX7219_DEBUG
|
||||
#if ENABLED(MAX7219_DEBUG)
|
||||
|
|
@ -4074,6 +4144,7 @@
|
|||
* Support for Synchronized Z moves when used with NanoDLP. G0/G1 axis moves will
|
||||
* output a "Z_move_comp" string to enable synchronization with DLP projector exposure.
|
||||
* This feature allows you to use [[WaitForDoneMessage]] instead of M400 commands.
|
||||
* @section nanodlp
|
||||
*/
|
||||
//#define NANODLP_Z_SYNC
|
||||
#if ENABLED(NANODLP_Z_SYNC)
|
||||
|
|
@ -4082,6 +4153,7 @@
|
|||
|
||||
/**
|
||||
* Ethernet. Use M552 to enable and set the IP address.
|
||||
* @section network
|
||||
*/
|
||||
#if HAS_ETHERNET
|
||||
#define MAC_ADDRESS { 0xDE, 0xAD, 0xBE, 0xEF, 0xF0, 0x0D } // A MAC address unique to your network
|
||||
|
|
@ -4109,6 +4181,8 @@
|
|||
//#include "Configuration_Secure.h" // External file with WiFi SSID / Password
|
||||
#endif
|
||||
|
||||
// @section multi-material
|
||||
|
||||
/**
|
||||
* Průša Multi-Material Unit (MMU)
|
||||
* Enable in Configuration.h
|
||||
|
|
@ -4216,6 +4290,7 @@
|
|||
|
||||
/**
|
||||
* Advanced Print Counter settings
|
||||
* @section stats
|
||||
*/
|
||||
#if ENABLED(PRINTCOUNTER)
|
||||
#define SERVICE_WARNING_BUZZES 3
|
||||
|
|
|
|||
|
|
@ -114,6 +114,7 @@
|
|||
* :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
|
||||
*/
|
||||
#define BAUDRATE 250000
|
||||
|
||||
//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate
|
||||
|
||||
/**
|
||||
|
|
@ -122,7 +123,7 @@
|
|||
* :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
//#define SERIAL_PORT_2 -1
|
||||
//#define BAUDRATE_2 250000 // Enable to override BAUDRATE
|
||||
//#define BAUDRATE_2 250000 // :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] Enable to override BAUDRATE
|
||||
|
||||
/**
|
||||
* Select a third serial port on the board to use for communication with the host.
|
||||
|
|
@ -130,7 +131,7 @@
|
|||
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
//#define SERIAL_PORT_3 1
|
||||
//#define BAUDRATE_3 250000 // Enable to override BAUDRATE
|
||||
//#define BAUDRATE_3 250000 // :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] Enable to override BAUDRATE
|
||||
|
||||
// Enable the Bluetooth serial interface on AT90USB devices
|
||||
//#define BLUETOOTH
|
||||
|
|
@ -389,7 +390,7 @@
|
|||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
// @section psu control
|
||||
|
||||
/**
|
||||
* Power Supply Control
|
||||
|
|
@ -625,6 +626,8 @@
|
|||
//============================= PID Settings ================================
|
||||
//===========================================================================
|
||||
|
||||
// @section hotend temp
|
||||
|
||||
// Enable PIDTEMP for PID control or MPCTEMP for Predictive Model.
|
||||
// temperature control. Disable both for bang-bang heating.
|
||||
#define PIDTEMP // See the PID Tuning Guide at https://reprap.org/wiki/PID_Tuning
|
||||
|
|
@ -635,7 +638,8 @@
|
|||
#define PID_K1 0.95 // Smoothing factor within any PID loop
|
||||
|
||||
#if ENABLED(PIDTEMP)
|
||||
//#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders)
|
||||
//#define PID_DEBUG // Print PID debug data to the serial port. Use 'M303 D' to toggle activation.
|
||||
//#define PID_PARAMS_PER_HOTEND // Use separate PID parameters for each extruder (useful for mismatched extruders)
|
||||
// Set/get with G-code: M301 E[extruder number, 0-2]
|
||||
|
||||
// A10M [@thinkyhead]
|
||||
|
|
@ -658,6 +662,7 @@
|
|||
* Use a physical model of the hotend to control temperature. When configured correctly
|
||||
* this gives better responsiveness and stability than PID and it also removes the need
|
||||
* for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model.
|
||||
* @section mpctemp
|
||||
*/
|
||||
#if ENABLED(MPCTEMP)
|
||||
//#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash)
|
||||
|
|
@ -725,7 +730,7 @@
|
|||
|
||||
#if ENABLED(PIDTEMPBED)
|
||||
//#define MIN_BED_POWER 0
|
||||
//#define PID_BED_DEBUG // Sends debug data to the serial port.
|
||||
//#define PID_BED_DEBUG // Print Bed PID debug data to the serial port.
|
||||
|
||||
// MeCreator2 generated by Autotune
|
||||
#define DEFAULT_bedKp 182.46 // 175.68 189.95
|
||||
|
|
@ -752,6 +757,7 @@
|
|||
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 200W
|
||||
* heater. If your configuration is significantly different than this and you don't understand
|
||||
* the issues involved, don't use chamber PID until someone else verifies that your hardware works.
|
||||
* @section chamber temp
|
||||
*/
|
||||
//#define PIDTEMPCHAMBER
|
||||
//#define CHAMBER_LIMIT_SWITCHING
|
||||
|
|
@ -766,7 +772,7 @@
|
|||
|
||||
#if ENABLED(PIDTEMPCHAMBER)
|
||||
#define MIN_CHAMBER_POWER 0
|
||||
//#define PID_CHAMBER_DEBUG // Sends debug data to the serial port.
|
||||
//#define PID_CHAMBER_DEBUG // Print Chamber PID debug data to the serial port.
|
||||
|
||||
// Lasko "MyHeat Personal Heater" (200w) modified with a Fotek SSR-10DA to control only the heating element
|
||||
// and placed inside the small Creality printer enclosure tent.
|
||||
|
|
@ -780,7 +786,6 @@
|
|||
#endif // PIDTEMPCHAMBER
|
||||
|
||||
#if ANY(PIDTEMP, PIDTEMPBED, PIDTEMPCHAMBER)
|
||||
//#define PID_DEBUG // Sends debug data to the serial port. Use 'M303 D' to toggle activation.
|
||||
//#define PID_OPENLOOP // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX
|
||||
//#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay
|
||||
#define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature
|
||||
|
|
@ -790,7 +795,7 @@
|
|||
#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of flash)
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
// @section safety
|
||||
|
||||
/**
|
||||
* Prevent extrusion if the temperature is below EXTRUDE_MINTEMP.
|
||||
|
|
@ -858,6 +863,8 @@
|
|||
#define POLAR_SEGMENTS_PER_SECOND 5
|
||||
#endif
|
||||
|
||||
// @section delta
|
||||
|
||||
// Enable for DELTA kinematics and configure below
|
||||
//#define DELTA
|
||||
#if ENABLED(DELTA)
|
||||
|
|
@ -917,6 +924,8 @@
|
|||
//#define DELTA_DIAGONAL_ROD_TRIM_TOWER { 0.0, 0.0, 0.0 }
|
||||
#endif
|
||||
|
||||
// @section scara
|
||||
|
||||
/**
|
||||
* MORGAN_SCARA was developed by QHARLEY in South Africa in 2012-2013.
|
||||
* Implemented and slightly reworked by JCERNY in June, 2014.
|
||||
|
|
@ -960,6 +969,8 @@
|
|||
|
||||
#endif
|
||||
|
||||
// @section tpara
|
||||
|
||||
// Enable for TPARA kinematics and configure below
|
||||
//#define AXEL_TPARA
|
||||
#if ENABLED(AXEL_TPARA)
|
||||
|
|
@ -986,6 +997,8 @@
|
|||
#define PSI_HOMING_OFFSET 0
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
|
|
@ -997,7 +1010,7 @@
|
|||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
||||
// @section homing
|
||||
// @section endstops
|
||||
|
||||
// Specify here all the endstop connectors that are connected to any endstop or probe.
|
||||
// Almost all printers will be using one per axis. Probes will use one or more of the
|
||||
|
|
@ -1667,7 +1680,7 @@
|
|||
//#define V_HOME_DIR -1
|
||||
//#define W_HOME_DIR -1
|
||||
|
||||
// @section machine
|
||||
// @section geometry
|
||||
|
||||
// The size of the printable area
|
||||
#define X_BED_SIZE 230
|
||||
|
|
@ -2130,7 +2143,7 @@
|
|||
//============================= Additional Features ===========================
|
||||
//=============================================================================
|
||||
|
||||
// @section extras
|
||||
// @section eeprom
|
||||
|
||||
/**
|
||||
* EEPROM
|
||||
|
|
@ -2150,6 +2163,8 @@
|
|||
//#define EEPROM_INIT_NOW // Init EEPROM on first boot after a new build.
|
||||
#endif
|
||||
|
||||
// @section host
|
||||
|
||||
//
|
||||
// Host Keepalive
|
||||
//
|
||||
|
|
@ -2160,6 +2175,8 @@
|
|||
#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113.
|
||||
#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating
|
||||
|
||||
// @section units
|
||||
|
||||
//
|
||||
// G20/G21 Inch mode support
|
||||
//
|
||||
|
|
@ -2187,6 +2204,8 @@
|
|||
#define PREHEAT_2_TEMP_CHAMBER 35
|
||||
#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
|
||||
|
||||
// @section motion
|
||||
|
||||
/**
|
||||
* Nozzle Park
|
||||
*
|
||||
|
|
@ -2285,6 +2304,8 @@
|
|||
|
||||
#endif
|
||||
|
||||
// @section host
|
||||
|
||||
/**
|
||||
* Print Job Timer
|
||||
*
|
||||
|
|
@ -2311,6 +2332,8 @@
|
|||
*/
|
||||
#define PRINTJOB_TIMER_AUTOSTART
|
||||
|
||||
// @section stats
|
||||
|
||||
/**
|
||||
* Print Counter
|
||||
*
|
||||
|
|
@ -2328,6 +2351,8 @@
|
|||
#define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print
|
||||
#endif
|
||||
|
||||
// @section security
|
||||
|
||||
/**
|
||||
* Password
|
||||
*
|
||||
|
|
@ -2363,7 +2388,7 @@
|
|||
//============================= LCD and SD support ============================
|
||||
//=============================================================================
|
||||
|
||||
// @section lcd
|
||||
// @section interface
|
||||
|
||||
/**
|
||||
* LCD LANGUAGE
|
||||
|
|
@ -2519,6 +2544,7 @@
|
|||
//======================== LCD / Controller Selection =========================
|
||||
//======================== (Character-based LCDs) =========================
|
||||
//=============================================================================
|
||||
// @section lcd
|
||||
|
||||
//
|
||||
// RepRapDiscount Smart Controller.
|
||||
|
|
@ -3164,7 +3190,7 @@
|
|||
//=============================== Extra Features ==============================
|
||||
//=============================================================================
|
||||
|
||||
// @section extras
|
||||
// @section fans
|
||||
|
||||
// Set number of user-controlled fans. Disable to use all board-defined fans.
|
||||
// :[1,2,3,4,5,6,7,8]
|
||||
|
|
@ -3188,14 +3214,18 @@
|
|||
// duty cycle is attained.
|
||||
//#define SOFT_PWM_DITHER
|
||||
|
||||
// @section extras
|
||||
|
||||
// Support for the BariCUDA Paste Extruder
|
||||
//#define BARICUDA
|
||||
|
||||
// @section lights
|
||||
|
||||
// Temperature status LEDs that display the hotend and bed temperature.
|
||||
// If all hotends, bed temperature, and target temperature are under 54C
|
||||
// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis)
|
||||
//#define TEMP_STAT_LEDS
|
||||
|
||||
// Support for the BariCUDA Paste Extruder
|
||||
//#define BARICUDA
|
||||
|
||||
// Support for BlinkM/CyzRgb
|
||||
//#define BLINKM
|
||||
|
||||
|
|
@ -3281,6 +3311,8 @@
|
|||
#define PRINTER_EVENT_LEDS
|
||||
#endif
|
||||
|
||||
// @section servos
|
||||
|
||||
/**
|
||||
* Number of servos
|
||||
*
|
||||
|
|
|
|||
|
|
@ -32,6 +32,24 @@
|
|||
*/
|
||||
#define CONFIGURATION_ADV_H_VERSION 02010100
|
||||
|
||||
// @section develop
|
||||
|
||||
/**
|
||||
* Configuration Dump to JSON and INI format
|
||||
*
|
||||
* Dump the configuration as part of the build. (See signature.py)
|
||||
* Output files are saved with the build (e.g., .pio/build/mega2560).
|
||||
*
|
||||
* See `build_all_examples --ini` as an example of config.ini archiving.
|
||||
*
|
||||
* 1 = marlin_config.json - Dictionary containing the configuration.
|
||||
* This file is also generated for CONFIGURATION_EMBEDDING.
|
||||
* 2 = config.ini - File format for PlatformIO preprocessing.
|
||||
* 3 = schema.json - The entire configuration schema. (13 = pattern groups)
|
||||
* 4 = schema.yml - The entire configuration schema.
|
||||
*/
|
||||
//#define CONFIG_DUMP // :[1:'JSON', 2:'config.ini', 3:'schema.json', 4:'schema.yml']
|
||||
|
||||
//===========================================================================
|
||||
//============================= Thermal Settings ============================
|
||||
//===========================================================================
|
||||
|
|
@ -2558,6 +2576,8 @@
|
|||
#endif
|
||||
#endif // HAS_MULTI_EXTRUDER
|
||||
|
||||
// @section advanced pause
|
||||
|
||||
/**
|
||||
* Advanced Pause for Filament Change
|
||||
* - Adds the G-code M600 Filament Change to initiate a filament change.
|
||||
|
|
@ -2616,13 +2636,12 @@
|
|||
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
|
||||
#endif
|
||||
|
||||
// @section tmc
|
||||
|
||||
/**
|
||||
* TMC26X Stepper Driver options
|
||||
*
|
||||
* The TMC26XStepper library is required for this stepper driver.
|
||||
* https://github.com/trinamic/TMC26XStepper
|
||||
* @section tmc/tmc26x
|
||||
*/
|
||||
#if HAS_DRIVER(TMC26X)
|
||||
|
||||
|
|
@ -2760,8 +2779,6 @@
|
|||
|
||||
#endif // TMC26X
|
||||
|
||||
// @section tmc_smart
|
||||
|
||||
/**
|
||||
* To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode
|
||||
* connect your SPI pins to the hardware SPI interface on your board and define
|
||||
|
|
@ -2777,6 +2794,7 @@
|
|||
*
|
||||
* TMCStepper library is required to use TMC stepper drivers.
|
||||
* https://github.com/teemuatlut/TMCStepper
|
||||
* @section tmc/config
|
||||
*/
|
||||
#if HAS_TRINAMIC_CONFIG
|
||||
|
||||
|
|
@ -3000,6 +3018,8 @@
|
|||
//#define E7_HOLD_MULTIPLIER 0.5
|
||||
#endif
|
||||
|
||||
// @section tmc/spi
|
||||
|
||||
/**
|
||||
* Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here.
|
||||
* The default pins can be found in your board's pins file.
|
||||
|
|
@ -3037,6 +3057,8 @@
|
|||
//#define TMC_SW_MISO -1
|
||||
//#define TMC_SW_SCK -1
|
||||
|
||||
// @section tmc/serial
|
||||
|
||||
/**
|
||||
* Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
|
||||
* Set the address using jumpers on pins MS1 and MS2.
|
||||
|
|
@ -3072,6 +3094,8 @@
|
|||
//#define E6_SLAVE_ADDRESS 0
|
||||
//#define E7_SLAVE_ADDRESS 0
|
||||
|
||||
// @section tmc/smart
|
||||
|
||||
/**
|
||||
* Software enable
|
||||
*
|
||||
|
|
@ -3080,6 +3104,8 @@
|
|||
*/
|
||||
//#define SOFTWARE_DRIVER_ENABLE
|
||||
|
||||
// @section tmc/stealthchop
|
||||
|
||||
/**
|
||||
* TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only
|
||||
* Use Trinamic's ultra quiet stepping mode.
|
||||
|
|
@ -3134,6 +3160,8 @@
|
|||
//#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
|
||||
//#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
|
||||
|
||||
// @section tmc/status
|
||||
|
||||
/**
|
||||
* Monitor Trinamic drivers
|
||||
* for error conditions like overtemperature and short to ground.
|
||||
|
|
@ -3153,6 +3181,8 @@
|
|||
#define STOP_ON_ERROR
|
||||
#endif
|
||||
|
||||
// @section tmc/hybrid
|
||||
|
||||
/**
|
||||
* TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only
|
||||
* The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD.
|
||||
|
|
@ -3209,6 +3239,7 @@
|
|||
* homing and adds a guard period for endstop triggering.
|
||||
*
|
||||
* Comment *_STALL_SENSITIVITY to disable sensorless homing for that axis.
|
||||
* @section tmc/stallguard
|
||||
*/
|
||||
//#define SENSORLESS_HOMING // StallGuard capable drivers only
|
||||
|
||||
|
|
@ -3232,6 +3263,8 @@
|
|||
//#define IMPROVE_HOMING_RELIABILITY
|
||||
#endif
|
||||
|
||||
// @section tmc/config
|
||||
|
||||
/**
|
||||
* TMC Homing stepper phase.
|
||||
*
|
||||
|
|
@ -3312,7 +3345,7 @@
|
|||
#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave
|
||||
#endif
|
||||
|
||||
// @section extras
|
||||
// @section photo
|
||||
|
||||
/**
|
||||
* Photo G-code
|
||||
|
|
@ -3355,6 +3388,8 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
// @section cnc
|
||||
|
||||
/**
|
||||
* Spindle & Laser control
|
||||
*
|
||||
|
|
@ -3559,6 +3594,8 @@
|
|||
#define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
|
||||
#endif
|
||||
|
||||
// @section filament width
|
||||
|
||||
/**
|
||||
* Filament Width Sensor
|
||||
*
|
||||
|
|
@ -3592,6 +3629,8 @@
|
|||
//#define FILAMENT_LCD_DISPLAY
|
||||
#endif
|
||||
|
||||
// @section power
|
||||
|
||||
/**
|
||||
* Power Monitor
|
||||
* Monitor voltage (V) and/or current (A), and -when possible- power (W)
|
||||
|
|
@ -3615,6 +3654,8 @@
|
|||
#define POWER_MONITOR_VOLTAGE_OFFSET 0 // Offset (in volts) applied to the calculated voltage
|
||||
#endif
|
||||
|
||||
// @section safety
|
||||
|
||||
/**
|
||||
* Stepper Driver Anti-SNAFU Protection
|
||||
*
|
||||
|
|
@ -3624,6 +3665,8 @@
|
|||
*/
|
||||
//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
|
||||
|
||||
// @section cnc
|
||||
|
||||
/**
|
||||
* CNC Coordinate Systems
|
||||
*
|
||||
|
|
@ -3640,6 +3683,8 @@
|
|||
*/
|
||||
//#define CNC_DRILLING_CYCLE
|
||||
|
||||
// @section reporting
|
||||
|
||||
/**
|
||||
* Auto-report fan speed with M123 S<seconds>
|
||||
* Requires fans with tachometer pins
|
||||
|
|
@ -3667,6 +3712,8 @@
|
|||
//#define M115_GEOMETRY_REPORT
|
||||
#endif
|
||||
|
||||
// @section security
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
|
|
@ -3674,6 +3721,8 @@
|
|||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
// @section volumetrics
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
|
|
@ -3702,14 +3751,7 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Enable this option for a leaner build of Marlin that removes all
|
||||
* workspace offsets, simplifying coordinate transformations, leveling, etc.
|
||||
*
|
||||
* - M206 and M428 are disabled.
|
||||
* - G92 will revert to its behavior from Marlin 1.0.
|
||||
*/
|
||||
#define NO_WORKSPACE_OFFSETS
|
||||
// @section reporting
|
||||
|
||||
// Extra options for the M114 "Current Position" report
|
||||
//#define M114_DETAIL // Use 'M114` for details to check planner calculations
|
||||
|
|
@ -3718,6 +3760,8 @@
|
|||
|
||||
//#define REPORT_FAN_CHANGE // Report the new fan speed when changed by M106 (and others)
|
||||
|
||||
// @section gcode
|
||||
|
||||
/**
|
||||
* Spend 28 bytes of SRAM to optimize the G-code parser
|
||||
*/
|
||||
|
|
@ -3735,6 +3779,15 @@
|
|||
|
||||
//#define REPETIER_GCODE_M360 // Add commands originally from Repetier FW
|
||||
|
||||
/**
|
||||
* Enable this option for a leaner build of Marlin that removes all
|
||||
* workspace offsets, simplifying coordinate transformations, leveling, etc.
|
||||
*
|
||||
* - M206 and M428 are disabled.
|
||||
* - G92 will revert to its behavior from Marlin 1.0.
|
||||
*/
|
||||
#define NO_WORKSPACE_OFFSETS
|
||||
|
||||
/**
|
||||
* CNC G-code options
|
||||
* Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.
|
||||
|
|
@ -3751,6 +3804,8 @@
|
|||
#endif
|
||||
//#define G0_ANGULAR_FEEDRATE 2700 // (°/min)
|
||||
|
||||
// @section gcode
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
|
|
@ -3775,6 +3830,8 @@
|
|||
* Up to 25 may be defined, but the actual number is LCD-dependent.
|
||||
*/
|
||||
|
||||
// @section custom main menu
|
||||
|
||||
// Custom Menu: Main Menu
|
||||
//#define CUSTOM_MENU_MAIN
|
||||
#if ENABLED(CUSTOM_MENU_MAIN)
|
||||
|
|
@ -3805,6 +3862,8 @@
|
|||
//#define MAIN_MENU_ITEM_5_CONFIRM
|
||||
#endif
|
||||
|
||||
// @section custom config menu
|
||||
|
||||
// Custom Menu: Configuration Menu
|
||||
//#define CUSTOM_MENU_CONFIG
|
||||
#if ENABLED(CUSTOM_MENU_CONFIG)
|
||||
|
|
@ -3835,6 +3894,8 @@
|
|||
//#define CONFIG_MENU_ITEM_5_CONFIRM
|
||||
#endif
|
||||
|
||||
// @section custom buttons
|
||||
|
||||
/**
|
||||
* User-defined buttons to run custom G-code.
|
||||
* Up to 25 may be defined.
|
||||
|
|
@ -3866,6 +3927,8 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
// @section host
|
||||
|
||||
/**
|
||||
* Host Action Commands
|
||||
*
|
||||
|
|
@ -3891,6 +3954,8 @@
|
|||
//#define HOST_SHUTDOWN_MENU_ITEM // Add a menu item that tells the host to shut down
|
||||
#endif
|
||||
|
||||
// @section extras
|
||||
|
||||
/**
|
||||
* Cancel Objects
|
||||
*
|
||||
|
|
@ -3912,6 +3977,7 @@
|
|||
* Alternative Supplier: https://reliabuild3d.com/
|
||||
*
|
||||
* Reliabuild encoders have been modified to improve reliability.
|
||||
* @section i2c encoders
|
||||
*/
|
||||
|
||||
//#define I2C_POSITION_ENCODERS
|
||||
|
|
@ -3983,6 +4049,7 @@
|
|||
|
||||
/**
|
||||
* Analog Joystick(s)
|
||||
* @section joystick
|
||||
*/
|
||||
//#define JOYSTICK
|
||||
#if ENABLED(JOYSTICK)
|
||||
|
|
@ -4007,6 +4074,7 @@
|
|||
* Modern replacement for the Prusa TMC_Z_CALIBRATION.
|
||||
* Adds capability to work with any adjustable current drivers.
|
||||
* Implemented as G34 because M915 is deprecated.
|
||||
* @section calibrate
|
||||
*/
|
||||
//#define MECHANICAL_GANTRY_CALIBRATION
|
||||
#if ENABLED(MECHANICAL_GANTRY_CALIBRATION)
|
||||
|
|
@ -4024,6 +4092,7 @@
|
|||
/**
|
||||
* Instant freeze / unfreeze functionality
|
||||
* Potentially useful for emergency stop that allows being resumed.
|
||||
* @section interface
|
||||
*/
|
||||
//#define FREEZE_FEATURE
|
||||
#if ENABLED(FREEZE_FEATURE)
|
||||
|
|
@ -4036,6 +4105,7 @@
|
|||
*
|
||||
* Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display.
|
||||
* Requires 3 signal wires. Some useful debug options are included to demonstrate its usage.
|
||||
* @section debug matrix
|
||||
*/
|
||||
//#define MAX7219_DEBUG
|
||||
#if ENABLED(MAX7219_DEBUG)
|
||||
|
|
@ -4074,6 +4144,7 @@
|
|||
* Support for Synchronized Z moves when used with NanoDLP. G0/G1 axis moves will
|
||||
* output a "Z_move_comp" string to enable synchronization with DLP projector exposure.
|
||||
* This feature allows you to use [[WaitForDoneMessage]] instead of M400 commands.
|
||||
* @section nanodlp
|
||||
*/
|
||||
//#define NANODLP_Z_SYNC
|
||||
#if ENABLED(NANODLP_Z_SYNC)
|
||||
|
|
@ -4082,6 +4153,7 @@
|
|||
|
||||
/**
|
||||
* Ethernet. Use M552 to enable and set the IP address.
|
||||
* @section network
|
||||
*/
|
||||
#if HAS_ETHERNET
|
||||
#define MAC_ADDRESS { 0xDE, 0xAD, 0xBE, 0xEF, 0xF0, 0x0D } // A MAC address unique to your network
|
||||
|
|
@ -4109,6 +4181,8 @@
|
|||
//#include "Configuration_Secure.h" // External file with WiFi SSID / Password
|
||||
#endif
|
||||
|
||||
// @section multi-material
|
||||
|
||||
/**
|
||||
* Průša Multi-Material Unit (MMU)
|
||||
* Enable in Configuration.h
|
||||
|
|
@ -4216,6 +4290,7 @@
|
|||
|
||||
/**
|
||||
* Advanced Print Counter settings
|
||||
* @section stats
|
||||
*/
|
||||
#if ENABLED(PRINTCOUNTER)
|
||||
#define SERVICE_WARNING_BUZZES 3
|
||||
|
|
|
|||
|
|
@ -114,6 +114,7 @@
|
|||
* :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
|
||||
*/
|
||||
#define BAUDRATE 115200
|
||||
|
||||
//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate
|
||||
|
||||
/**
|
||||
|
|
@ -122,7 +123,7 @@
|
|||
* :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
//#define SERIAL_PORT_2 -1
|
||||
//#define BAUDRATE_2 250000 // Enable to override BAUDRATE
|
||||
//#define BAUDRATE_2 250000 // :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] Enable to override BAUDRATE
|
||||
|
||||
/**
|
||||
* Select a third serial port on the board to use for communication with the host.
|
||||
|
|
@ -130,7 +131,7 @@
|
|||
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
//#define SERIAL_PORT_3 1
|
||||
//#define BAUDRATE_3 250000 // Enable to override BAUDRATE
|
||||
//#define BAUDRATE_3 250000 // :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] Enable to override BAUDRATE
|
||||
|
||||
// Enable the Bluetooth serial interface on AT90USB devices
|
||||
//#define BLUETOOTH
|
||||
|
|
@ -389,7 +390,7 @@
|
|||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
// @section psu control
|
||||
|
||||
/**
|
||||
* Power Supply Control
|
||||
|
|
@ -625,6 +626,8 @@
|
|||
//============================= PID Settings ================================
|
||||
//===========================================================================
|
||||
|
||||
// @section hotend temp
|
||||
|
||||
// Enable PIDTEMP for PID control or MPCTEMP for Predictive Model.
|
||||
// temperature control. Disable both for bang-bang heating.
|
||||
#define PIDTEMP // See the PID Tuning Guide at https://reprap.org/wiki/PID_Tuning
|
||||
|
|
@ -635,7 +638,8 @@
|
|||
#define PID_K1 0.95 // Smoothing factor within any PID loop
|
||||
|
||||
#if ENABLED(PIDTEMP)
|
||||
//#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders)
|
||||
//#define PID_DEBUG // Print PID debug data to the serial port. Use 'M303 D' to toggle activation.
|
||||
//#define PID_PARAMS_PER_HOTEND // Use separate PID parameters for each extruder (useful for mismatched extruders)
|
||||
// Set/get with G-code: M301 E[extruder number, 0-2]
|
||||
|
||||
// A20M [@thinkyhead]
|
||||
|
|
@ -658,6 +662,7 @@
|
|||
* Use a physical model of the hotend to control temperature. When configured correctly
|
||||
* this gives better responsiveness and stability than PID and it also removes the need
|
||||
* for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model.
|
||||
* @section mpctemp
|
||||
*/
|
||||
#if ENABLED(MPCTEMP)
|
||||
//#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash)
|
||||
|
|
@ -725,7 +730,7 @@
|
|||
|
||||
#if ENABLED(PIDTEMPBED)
|
||||
//#define MIN_BED_POWER 0
|
||||
//#define PID_BED_DEBUG // Sends debug data to the serial port.
|
||||
//#define PID_BED_DEBUG // Print Bed PID debug data to the serial port.
|
||||
|
||||
// MeCreator2 generated by Autotune
|
||||
#define DEFAULT_bedKp 182.46 // 175.68 189.95
|
||||
|
|
@ -752,6 +757,7 @@
|
|||
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 200W
|
||||
* heater. If your configuration is significantly different than this and you don't understand
|
||||
* the issues involved, don't use chamber PID until someone else verifies that your hardware works.
|
||||
* @section chamber temp
|
||||
*/
|
||||
//#define PIDTEMPCHAMBER
|
||||
//#define CHAMBER_LIMIT_SWITCHING
|
||||
|
|
@ -766,7 +772,7 @@
|
|||
|
||||
#if ENABLED(PIDTEMPCHAMBER)
|
||||
#define MIN_CHAMBER_POWER 0
|
||||
//#define PID_CHAMBER_DEBUG // Sends debug data to the serial port.
|
||||
//#define PID_CHAMBER_DEBUG // Print Chamber PID debug data to the serial port.
|
||||
|
||||
// Lasko "MyHeat Personal Heater" (200w) modified with a Fotek SSR-10DA to control only the heating element
|
||||
// and placed inside the small Creality printer enclosure tent.
|
||||
|
|
@ -780,7 +786,6 @@
|
|||
#endif // PIDTEMPCHAMBER
|
||||
|
||||
#if ANY(PIDTEMP, PIDTEMPBED, PIDTEMPCHAMBER)
|
||||
//#define PID_DEBUG // Sends debug data to the serial port. Use 'M303 D' to toggle activation.
|
||||
//#define PID_OPENLOOP // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX
|
||||
//#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay
|
||||
#define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature
|
||||
|
|
@ -790,7 +795,7 @@
|
|||
#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of flash)
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
// @section safety
|
||||
|
||||
/**
|
||||
* Prevent extrusion if the temperature is below EXTRUDE_MINTEMP.
|
||||
|
|
@ -858,6 +863,8 @@
|
|||
#define POLAR_SEGMENTS_PER_SECOND 5
|
||||
#endif
|
||||
|
||||
// @section delta
|
||||
|
||||
// Enable for DELTA kinematics and configure below
|
||||
//#define DELTA
|
||||
#if ENABLED(DELTA)
|
||||
|
|
@ -917,6 +924,8 @@
|
|||
//#define DELTA_DIAGONAL_ROD_TRIM_TOWER { 0.0, 0.0, 0.0 }
|
||||
#endif
|
||||
|
||||
// @section scara
|
||||
|
||||
/**
|
||||
* MORGAN_SCARA was developed by QHARLEY in South Africa in 2012-2013.
|
||||
* Implemented and slightly reworked by JCERNY in June, 2014.
|
||||
|
|
@ -960,6 +969,8 @@
|
|||
|
||||
#endif
|
||||
|
||||
// @section tpara
|
||||
|
||||
// Enable for TPARA kinematics and configure below
|
||||
//#define AXEL_TPARA
|
||||
#if ENABLED(AXEL_TPARA)
|
||||
|
|
@ -986,6 +997,8 @@
|
|||
#define PSI_HOMING_OFFSET 0
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
|
|
@ -997,7 +1010,7 @@
|
|||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
||||
// @section homing
|
||||
// @section endstops
|
||||
|
||||
// Specify here all the endstop connectors that are connected to any endstop or probe.
|
||||
// Almost all printers will be using one per axis. Probes will use one or more of the
|
||||
|
|
@ -1667,7 +1680,7 @@
|
|||
//#define V_HOME_DIR -1
|
||||
//#define W_HOME_DIR -1
|
||||
|
||||
// @section machine
|
||||
// @section geometry
|
||||
|
||||
// The size of the printable area
|
||||
#define X_BED_SIZE 255
|
||||
|
|
@ -2128,7 +2141,7 @@
|
|||
//============================= Additional Features ===========================
|
||||
//=============================================================================
|
||||
|
||||
// @section extras
|
||||
// @section eeprom
|
||||
|
||||
/**
|
||||
* EEPROM
|
||||
|
|
@ -2148,6 +2161,8 @@
|
|||
//#define EEPROM_INIT_NOW // Init EEPROM on first boot after a new build.
|
||||
#endif
|
||||
|
||||
// @section host
|
||||
|
||||
//
|
||||
// Host Keepalive
|
||||
//
|
||||
|
|
@ -2158,6 +2173,8 @@
|
|||
#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113.
|
||||
#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating
|
||||
|
||||
// @section units
|
||||
|
||||
//
|
||||
// G20/G21 Inch mode support
|
||||
//
|
||||
|
|
@ -2185,6 +2202,8 @@
|
|||
#define PREHEAT_2_TEMP_CHAMBER 35
|
||||
#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
|
||||
|
||||
// @section motion
|
||||
|
||||
/**
|
||||
* Nozzle Park
|
||||
*
|
||||
|
|
@ -2283,6 +2302,8 @@
|
|||
|
||||
#endif
|
||||
|
||||
// @section host
|
||||
|
||||
/**
|
||||
* Print Job Timer
|
||||
*
|
||||
|
|
@ -2309,6 +2330,8 @@
|
|||
*/
|
||||
#define PRINTJOB_TIMER_AUTOSTART
|
||||
|
||||
// @section stats
|
||||
|
||||
/**
|
||||
* Print Counter
|
||||
*
|
||||
|
|
@ -2326,6 +2349,8 @@
|
|||
#define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print
|
||||
#endif
|
||||
|
||||
// @section security
|
||||
|
||||
/**
|
||||
* Password
|
||||
*
|
||||
|
|
@ -2361,7 +2386,7 @@
|
|||
//============================= LCD and SD support ============================
|
||||
//=============================================================================
|
||||
|
||||
// @section lcd
|
||||
// @section interface
|
||||
|
||||
/**
|
||||
* LCD LANGUAGE
|
||||
|
|
@ -2517,6 +2542,7 @@
|
|||
//======================== LCD / Controller Selection =========================
|
||||
//======================== (Character-based LCDs) =========================
|
||||
//=============================================================================
|
||||
// @section lcd
|
||||
|
||||
//
|
||||
// RepRapDiscount Smart Controller.
|
||||
|
|
@ -3165,7 +3191,7 @@
|
|||
//=============================== Extra Features ==============================
|
||||
//=============================================================================
|
||||
|
||||
// @section extras
|
||||
// @section fans
|
||||
|
||||
// Set number of user-controlled fans. Disable to use all board-defined fans.
|
||||
// :[1,2,3,4,5,6,7,8]
|
||||
|
|
@ -3189,14 +3215,18 @@
|
|||
// duty cycle is attained.
|
||||
//#define SOFT_PWM_DITHER
|
||||
|
||||
// @section extras
|
||||
|
||||
// Support for the BariCUDA Paste Extruder
|
||||
//#define BARICUDA
|
||||
|
||||
// @section lights
|
||||
|
||||
// Temperature status LEDs that display the hotend and bed temperature.
|
||||
// If all hotends, bed temperature, and target temperature are under 54C
|
||||
// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis)
|
||||
//#define TEMP_STAT_LEDS
|
||||
|
||||
// Support for the BariCUDA Paste Extruder
|
||||
//#define BARICUDA
|
||||
|
||||
// Support for BlinkM/CyzRgb
|
||||
//#define BLINKM
|
||||
|
||||
|
|
@ -3282,6 +3312,8 @@
|
|||
#define PRINTER_EVENT_LEDS
|
||||
#endif
|
||||
|
||||
// @section servos
|
||||
|
||||
/**
|
||||
* Number of servos
|
||||
*
|
||||
|
|
|
|||
|
|
@ -32,6 +32,24 @@
|
|||
*/
|
||||
#define CONFIGURATION_ADV_H_VERSION 02010100
|
||||
|
||||
// @section develop
|
||||
|
||||
/**
|
||||
* Configuration Dump to JSON and INI format
|
||||
*
|
||||
* Dump the configuration as part of the build. (See signature.py)
|
||||
* Output files are saved with the build (e.g., .pio/build/mega2560).
|
||||
*
|
||||
* See `build_all_examples --ini` as an example of config.ini archiving.
|
||||
*
|
||||
* 1 = marlin_config.json - Dictionary containing the configuration.
|
||||
* This file is also generated for CONFIGURATION_EMBEDDING.
|
||||
* 2 = config.ini - File format for PlatformIO preprocessing.
|
||||
* 3 = schema.json - The entire configuration schema. (13 = pattern groups)
|
||||
* 4 = schema.yml - The entire configuration schema.
|
||||
*/
|
||||
//#define CONFIG_DUMP // :[1:'JSON', 2:'config.ini', 3:'schema.json', 4:'schema.yml']
|
||||
|
||||
//===========================================================================
|
||||
//============================= Thermal Settings ============================
|
||||
//===========================================================================
|
||||
|
|
@ -2558,6 +2576,8 @@
|
|||
#endif
|
||||
#endif // HAS_MULTI_EXTRUDER
|
||||
|
||||
// @section advanced pause
|
||||
|
||||
/**
|
||||
* Advanced Pause for Filament Change
|
||||
* - Adds the G-code M600 Filament Change to initiate a filament change.
|
||||
|
|
@ -2616,13 +2636,12 @@
|
|||
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
|
||||
#endif
|
||||
|
||||
// @section tmc
|
||||
|
||||
/**
|
||||
* TMC26X Stepper Driver options
|
||||
*
|
||||
* The TMC26XStepper library is required for this stepper driver.
|
||||
* https://github.com/trinamic/TMC26XStepper
|
||||
* @section tmc/tmc26x
|
||||
*/
|
||||
#if HAS_DRIVER(TMC26X)
|
||||
|
||||
|
|
@ -2760,8 +2779,6 @@
|
|||
|
||||
#endif // TMC26X
|
||||
|
||||
// @section tmc_smart
|
||||
|
||||
/**
|
||||
* To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode
|
||||
* connect your SPI pins to the hardware SPI interface on your board and define
|
||||
|
|
@ -2777,6 +2794,7 @@
|
|||
*
|
||||
* TMCStepper library is required to use TMC stepper drivers.
|
||||
* https://github.com/teemuatlut/TMCStepper
|
||||
* @section tmc/config
|
||||
*/
|
||||
#if HAS_TRINAMIC_CONFIG
|
||||
|
||||
|
|
@ -3000,6 +3018,8 @@
|
|||
//#define E7_HOLD_MULTIPLIER 0.5
|
||||
#endif
|
||||
|
||||
// @section tmc/spi
|
||||
|
||||
/**
|
||||
* Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here.
|
||||
* The default pins can be found in your board's pins file.
|
||||
|
|
@ -3037,6 +3057,8 @@
|
|||
//#define TMC_SW_MISO -1
|
||||
//#define TMC_SW_SCK -1
|
||||
|
||||
// @section tmc/serial
|
||||
|
||||
/**
|
||||
* Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
|
||||
* Set the address using jumpers on pins MS1 and MS2.
|
||||
|
|
@ -3072,6 +3094,8 @@
|
|||
//#define E6_SLAVE_ADDRESS 0
|
||||
//#define E7_SLAVE_ADDRESS 0
|
||||
|
||||
// @section tmc/smart
|
||||
|
||||
/**
|
||||
* Software enable
|
||||
*
|
||||
|
|
@ -3080,6 +3104,8 @@
|
|||
*/
|
||||
//#define SOFTWARE_DRIVER_ENABLE
|
||||
|
||||
// @section tmc/stealthchop
|
||||
|
||||
/**
|
||||
* TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only
|
||||
* Use Trinamic's ultra quiet stepping mode.
|
||||
|
|
@ -3134,6 +3160,8 @@
|
|||
//#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
|
||||
//#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
|
||||
|
||||
// @section tmc/status
|
||||
|
||||
/**
|
||||
* Monitor Trinamic drivers
|
||||
* for error conditions like overtemperature and short to ground.
|
||||
|
|
@ -3153,6 +3181,8 @@
|
|||
#define STOP_ON_ERROR
|
||||
#endif
|
||||
|
||||
// @section tmc/hybrid
|
||||
|
||||
/**
|
||||
* TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only
|
||||
* The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD.
|
||||
|
|
@ -3209,6 +3239,7 @@
|
|||
* homing and adds a guard period for endstop triggering.
|
||||
*
|
||||
* Comment *_STALL_SENSITIVITY to disable sensorless homing for that axis.
|
||||
* @section tmc/stallguard
|
||||
*/
|
||||
//#define SENSORLESS_HOMING // StallGuard capable drivers only
|
||||
|
||||
|
|
@ -3232,6 +3263,8 @@
|
|||
//#define IMPROVE_HOMING_RELIABILITY
|
||||
#endif
|
||||
|
||||
// @section tmc/config
|
||||
|
||||
/**
|
||||
* TMC Homing stepper phase.
|
||||
*
|
||||
|
|
@ -3312,7 +3345,7 @@
|
|||
#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave
|
||||
#endif
|
||||
|
||||
// @section extras
|
||||
// @section photo
|
||||
|
||||
/**
|
||||
* Photo G-code
|
||||
|
|
@ -3355,6 +3388,8 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
// @section cnc
|
||||
|
||||
/**
|
||||
* Spindle & Laser control
|
||||
*
|
||||
|
|
@ -3559,6 +3594,8 @@
|
|||
#define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
|
||||
#endif
|
||||
|
||||
// @section filament width
|
||||
|
||||
/**
|
||||
* Filament Width Sensor
|
||||
*
|
||||
|
|
@ -3592,6 +3629,8 @@
|
|||
//#define FILAMENT_LCD_DISPLAY
|
||||
#endif
|
||||
|
||||
// @section power
|
||||
|
||||
/**
|
||||
* Power Monitor
|
||||
* Monitor voltage (V) and/or current (A), and -when possible- power (W)
|
||||
|
|
@ -3615,6 +3654,8 @@
|
|||
#define POWER_MONITOR_VOLTAGE_OFFSET 0 // Offset (in volts) applied to the calculated voltage
|
||||
#endif
|
||||
|
||||
// @section safety
|
||||
|
||||
/**
|
||||
* Stepper Driver Anti-SNAFU Protection
|
||||
*
|
||||
|
|
@ -3624,6 +3665,8 @@
|
|||
*/
|
||||
//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
|
||||
|
||||
// @section cnc
|
||||
|
||||
/**
|
||||
* CNC Coordinate Systems
|
||||
*
|
||||
|
|
@ -3640,6 +3683,8 @@
|
|||
*/
|
||||
//#define CNC_DRILLING_CYCLE
|
||||
|
||||
// @section reporting
|
||||
|
||||
/**
|
||||
* Auto-report fan speed with M123 S<seconds>
|
||||
* Requires fans with tachometer pins
|
||||
|
|
@ -3667,6 +3712,8 @@
|
|||
//#define M115_GEOMETRY_REPORT
|
||||
#endif
|
||||
|
||||
// @section security
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
|
|
@ -3674,6 +3721,8 @@
|
|||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
// @section volumetrics
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
|
|
@ -3702,14 +3751,7 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Enable this option for a leaner build of Marlin that removes all
|
||||
* workspace offsets, simplifying coordinate transformations, leveling, etc.
|
||||
*
|
||||
* - M206 and M428 are disabled.
|
||||
* - G92 will revert to its behavior from Marlin 1.0.
|
||||
*/
|
||||
//#define NO_WORKSPACE_OFFSETS
|
||||
// @section reporting
|
||||
|
||||
// Extra options for the M114 "Current Position" report
|
||||
//#define M114_DETAIL // Use 'M114` for details to check planner calculations
|
||||
|
|
@ -3718,6 +3760,8 @@
|
|||
|
||||
//#define REPORT_FAN_CHANGE // Report the new fan speed when changed by M106 (and others)
|
||||
|
||||
// @section gcode
|
||||
|
||||
/**
|
||||
* Spend 28 bytes of SRAM to optimize the G-code parser
|
||||
*/
|
||||
|
|
@ -3735,6 +3779,15 @@
|
|||
|
||||
//#define REPETIER_GCODE_M360 // Add commands originally from Repetier FW
|
||||
|
||||
/**
|
||||
* Enable this option for a leaner build of Marlin that removes all
|
||||
* workspace offsets, simplifying coordinate transformations, leveling, etc.
|
||||
*
|
||||
* - M206 and M428 are disabled.
|
||||
* - G92 will revert to its behavior from Marlin 1.0.
|
||||
*/
|
||||
//#define NO_WORKSPACE_OFFSETS
|
||||
|
||||
/**
|
||||
* CNC G-code options
|
||||
* Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.
|
||||
|
|
@ -3751,6 +3804,8 @@
|
|||
#endif
|
||||
//#define G0_ANGULAR_FEEDRATE 2700 // (°/min)
|
||||
|
||||
// @section gcode
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
|
|
@ -3775,6 +3830,8 @@
|
|||
* Up to 25 may be defined, but the actual number is LCD-dependent.
|
||||
*/
|
||||
|
||||
// @section custom main menu
|
||||
|
||||
// Custom Menu: Main Menu
|
||||
//#define CUSTOM_MENU_MAIN
|
||||
#if ENABLED(CUSTOM_MENU_MAIN)
|
||||
|
|
@ -3805,6 +3862,8 @@
|
|||
//#define MAIN_MENU_ITEM_5_CONFIRM
|
||||
#endif
|
||||
|
||||
// @section custom config menu
|
||||
|
||||
// Custom Menu: Configuration Menu
|
||||
//#define CUSTOM_MENU_CONFIG
|
||||
#if ENABLED(CUSTOM_MENU_CONFIG)
|
||||
|
|
@ -3835,6 +3894,8 @@
|
|||
//#define CONFIG_MENU_ITEM_5_CONFIRM
|
||||
#endif
|
||||
|
||||
// @section custom buttons
|
||||
|
||||
/**
|
||||
* User-defined buttons to run custom G-code.
|
||||
* Up to 25 may be defined.
|
||||
|
|
@ -3866,6 +3927,8 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
// @section host
|
||||
|
||||
/**
|
||||
* Host Action Commands
|
||||
*
|
||||
|
|
@ -3891,6 +3954,8 @@
|
|||
//#define HOST_SHUTDOWN_MENU_ITEM // Add a menu item that tells the host to shut down
|
||||
#endif
|
||||
|
||||
// @section extras
|
||||
|
||||
/**
|
||||
* Cancel Objects
|
||||
*
|
||||
|
|
@ -3912,6 +3977,7 @@
|
|||
* Alternative Supplier: https://reliabuild3d.com/
|
||||
*
|
||||
* Reliabuild encoders have been modified to improve reliability.
|
||||
* @section i2c encoders
|
||||
*/
|
||||
|
||||
//#define I2C_POSITION_ENCODERS
|
||||
|
|
@ -3983,6 +4049,7 @@
|
|||
|
||||
/**
|
||||
* Analog Joystick(s)
|
||||
* @section joystick
|
||||
*/
|
||||
//#define JOYSTICK
|
||||
#if ENABLED(JOYSTICK)
|
||||
|
|
@ -4007,6 +4074,7 @@
|
|||
* Modern replacement for the Prusa TMC_Z_CALIBRATION.
|
||||
* Adds capability to work with any adjustable current drivers.
|
||||
* Implemented as G34 because M915 is deprecated.
|
||||
* @section calibrate
|
||||
*/
|
||||
//#define MECHANICAL_GANTRY_CALIBRATION
|
||||
#if ENABLED(MECHANICAL_GANTRY_CALIBRATION)
|
||||
|
|
@ -4024,6 +4092,7 @@
|
|||
/**
|
||||
* Instant freeze / unfreeze functionality
|
||||
* Potentially useful for emergency stop that allows being resumed.
|
||||
* @section interface
|
||||
*/
|
||||
//#define FREEZE_FEATURE
|
||||
#if ENABLED(FREEZE_FEATURE)
|
||||
|
|
@ -4036,6 +4105,7 @@
|
|||
*
|
||||
* Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display.
|
||||
* Requires 3 signal wires. Some useful debug options are included to demonstrate its usage.
|
||||
* @section debug matrix
|
||||
*/
|
||||
//#define MAX7219_DEBUG
|
||||
#if ENABLED(MAX7219_DEBUG)
|
||||
|
|
@ -4074,6 +4144,7 @@
|
|||
* Support for Synchronized Z moves when used with NanoDLP. G0/G1 axis moves will
|
||||
* output a "Z_move_comp" string to enable synchronization with DLP projector exposure.
|
||||
* This feature allows you to use [[WaitForDoneMessage]] instead of M400 commands.
|
||||
* @section nanodlp
|
||||
*/
|
||||
//#define NANODLP_Z_SYNC
|
||||
#if ENABLED(NANODLP_Z_SYNC)
|
||||
|
|
@ -4082,6 +4153,7 @@
|
|||
|
||||
/**
|
||||
* Ethernet. Use M552 to enable and set the IP address.
|
||||
* @section network
|
||||
*/
|
||||
#if HAS_ETHERNET
|
||||
#define MAC_ADDRESS { 0xDE, 0xAD, 0xBE, 0xEF, 0xF0, 0x0D } // A MAC address unique to your network
|
||||
|
|
@ -4109,6 +4181,8 @@
|
|||
//#include "Configuration_Secure.h" // External file with WiFi SSID / Password
|
||||
#endif
|
||||
|
||||
// @section multi-material
|
||||
|
||||
/**
|
||||
* Průša Multi-Material Unit (MMU)
|
||||
* Enable in Configuration.h
|
||||
|
|
@ -4216,6 +4290,7 @@
|
|||
|
||||
/**
|
||||
* Advanced Print Counter settings
|
||||
* @section stats
|
||||
*/
|
||||
#if ENABLED(PRINTCOUNTER)
|
||||
#define SERVICE_WARNING_BUZZES 3
|
||||
|
|
|
|||
|
|
@ -114,6 +114,7 @@
|
|||
* :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
|
||||
*/
|
||||
#define BAUDRATE 115200
|
||||
|
||||
//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate
|
||||
|
||||
/**
|
||||
|
|
@ -122,7 +123,7 @@
|
|||
* :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
//#define SERIAL_PORT_2 -1
|
||||
//#define BAUDRATE_2 250000 // Enable to override BAUDRATE
|
||||
//#define BAUDRATE_2 250000 // :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] Enable to override BAUDRATE
|
||||
|
||||
/**
|
||||
* Select a third serial port on the board to use for communication with the host.
|
||||
|
|
@ -130,7 +131,7 @@
|
|||
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
//#define SERIAL_PORT_3 1
|
||||
//#define BAUDRATE_3 250000 // Enable to override BAUDRATE
|
||||
//#define BAUDRATE_3 250000 // :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] Enable to override BAUDRATE
|
||||
|
||||
// Enable the Bluetooth serial interface on AT90USB devices
|
||||
//#define BLUETOOTH
|
||||
|
|
@ -389,7 +390,7 @@
|
|||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
// @section psu control
|
||||
|
||||
/**
|
||||
* Power Supply Control
|
||||
|
|
@ -625,6 +626,8 @@
|
|||
//============================= PID Settings ================================
|
||||
//===========================================================================
|
||||
|
||||
// @section hotend temp
|
||||
|
||||
// Enable PIDTEMP for PID control or MPCTEMP for Predictive Model.
|
||||
// temperature control. Disable both for bang-bang heating.
|
||||
#define PIDTEMP // See the PID Tuning Guide at https://reprap.org/wiki/PID_Tuning
|
||||
|
|
@ -635,7 +638,8 @@
|
|||
#define PID_K1 0.95 // Smoothing factor within any PID loop
|
||||
|
||||
#if ENABLED(PIDTEMP)
|
||||
//#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders)
|
||||
//#define PID_DEBUG // Print PID debug data to the serial port. Use 'M303 D' to toggle activation.
|
||||
//#define PID_PARAMS_PER_HOTEND // Use separate PID parameters for each extruder (useful for mismatched extruders)
|
||||
// Set/get with G-code: M301 E[extruder number, 0-2]
|
||||
|
||||
// A20M [@thinkyhead]
|
||||
|
|
@ -658,6 +662,7 @@
|
|||
* Use a physical model of the hotend to control temperature. When configured correctly
|
||||
* this gives better responsiveness and stability than PID and it also removes the need
|
||||
* for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model.
|
||||
* @section mpctemp
|
||||
*/
|
||||
#if ENABLED(MPCTEMP)
|
||||
//#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash)
|
||||
|
|
@ -725,7 +730,7 @@
|
|||
|
||||
#if ENABLED(PIDTEMPBED)
|
||||
//#define MIN_BED_POWER 0
|
||||
//#define PID_BED_DEBUG // Sends debug data to the serial port.
|
||||
//#define PID_BED_DEBUG // Print Bed PID debug data to the serial port.
|
||||
|
||||
// MeCreator2 generated by Autotune
|
||||
#define DEFAULT_bedKp 182.46 // 175.68 189.95
|
||||
|
|
@ -752,6 +757,7 @@
|
|||
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 200W
|
||||
* heater. If your configuration is significantly different than this and you don't understand
|
||||
* the issues involved, don't use chamber PID until someone else verifies that your hardware works.
|
||||
* @section chamber temp
|
||||
*/
|
||||
//#define PIDTEMPCHAMBER
|
||||
//#define CHAMBER_LIMIT_SWITCHING
|
||||
|
|
@ -766,7 +772,7 @@
|
|||
|
||||
#if ENABLED(PIDTEMPCHAMBER)
|
||||
#define MIN_CHAMBER_POWER 0
|
||||
//#define PID_CHAMBER_DEBUG // Sends debug data to the serial port.
|
||||
//#define PID_CHAMBER_DEBUG // Print Chamber PID debug data to the serial port.
|
||||
|
||||
// Lasko "MyHeat Personal Heater" (200w) modified with a Fotek SSR-10DA to control only the heating element
|
||||
// and placed inside the small Creality printer enclosure tent.
|
||||
|
|
@ -780,7 +786,6 @@
|
|||
#endif // PIDTEMPCHAMBER
|
||||
|
||||
#if ANY(PIDTEMP, PIDTEMPBED, PIDTEMPCHAMBER)
|
||||
//#define PID_DEBUG // Sends debug data to the serial port. Use 'M303 D' to toggle activation.
|
||||
//#define PID_OPENLOOP // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX
|
||||
//#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay
|
||||
#define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature
|
||||
|
|
@ -790,7 +795,7 @@
|
|||
#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of flash)
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
// @section safety
|
||||
|
||||
/**
|
||||
* Prevent extrusion if the temperature is below EXTRUDE_MINTEMP.
|
||||
|
|
@ -858,6 +863,8 @@
|
|||
#define POLAR_SEGMENTS_PER_SECOND 5
|
||||
#endif
|
||||
|
||||
// @section delta
|
||||
|
||||
// Enable for DELTA kinematics and configure below
|
||||
//#define DELTA
|
||||
#if ENABLED(DELTA)
|
||||
|
|
@ -917,6 +924,8 @@
|
|||
//#define DELTA_DIAGONAL_ROD_TRIM_TOWER { 0.0, 0.0, 0.0 }
|
||||
#endif
|
||||
|
||||
// @section scara
|
||||
|
||||
/**
|
||||
* MORGAN_SCARA was developed by QHARLEY in South Africa in 2012-2013.
|
||||
* Implemented and slightly reworked by JCERNY in June, 2014.
|
||||
|
|
@ -960,6 +969,8 @@
|
|||
|
||||
#endif
|
||||
|
||||
// @section tpara
|
||||
|
||||
// Enable for TPARA kinematics and configure below
|
||||
//#define AXEL_TPARA
|
||||
#if ENABLED(AXEL_TPARA)
|
||||
|
|
@ -986,6 +997,8 @@
|
|||
#define PSI_HOMING_OFFSET 0
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
|
|
@ -997,7 +1010,7 @@
|
|||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
||||
// @section homing
|
||||
// @section endstops
|
||||
|
||||
// Specify here all the endstop connectors that are connected to any endstop or probe.
|
||||
// Almost all printers will be using one per axis. Probes will use one or more of the
|
||||
|
|
@ -1667,7 +1680,7 @@
|
|||
//#define V_HOME_DIR -1
|
||||
//#define W_HOME_DIR -1
|
||||
|
||||
// @section machine
|
||||
// @section geometry
|
||||
|
||||
// The size of the printable area
|
||||
#define X_BED_SIZE 255
|
||||
|
|
@ -2129,7 +2142,7 @@
|
|||
//============================= Additional Features ===========================
|
||||
//=============================================================================
|
||||
|
||||
// @section extras
|
||||
// @section eeprom
|
||||
|
||||
/**
|
||||
* EEPROM
|
||||
|
|
@ -2149,6 +2162,8 @@
|
|||
//#define EEPROM_INIT_NOW // Init EEPROM on first boot after a new build.
|
||||
#endif
|
||||
|
||||
// @section host
|
||||
|
||||
//
|
||||
// Host Keepalive
|
||||
//
|
||||
|
|
@ -2159,6 +2174,8 @@
|
|||
#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113.
|
||||
#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating
|
||||
|
||||
// @section units
|
||||
|
||||
//
|
||||
// G20/G21 Inch mode support
|
||||
//
|
||||
|
|
@ -2186,6 +2203,8 @@
|
|||
#define PREHEAT_2_TEMP_CHAMBER 35
|
||||
#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
|
||||
|
||||
// @section motion
|
||||
|
||||
/**
|
||||
* Nozzle Park
|
||||
*
|
||||
|
|
@ -2284,6 +2303,8 @@
|
|||
|
||||
#endif
|
||||
|
||||
// @section host
|
||||
|
||||
/**
|
||||
* Print Job Timer
|
||||
*
|
||||
|
|
@ -2310,6 +2331,8 @@
|
|||
*/
|
||||
#define PRINTJOB_TIMER_AUTOSTART
|
||||
|
||||
// @section stats
|
||||
|
||||
/**
|
||||
* Print Counter
|
||||
*
|
||||
|
|
@ -2327,6 +2350,8 @@
|
|||
#define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print
|
||||
#endif
|
||||
|
||||
// @section security
|
||||
|
||||
/**
|
||||
* Password
|
||||
*
|
||||
|
|
@ -2362,7 +2387,7 @@
|
|||
//============================= LCD and SD support ============================
|
||||
//=============================================================================
|
||||
|
||||
// @section lcd
|
||||
// @section interface
|
||||
|
||||
/**
|
||||
* LCD LANGUAGE
|
||||
|
|
@ -2518,6 +2543,7 @@
|
|||
//======================== LCD / Controller Selection =========================
|
||||
//======================== (Character-based LCDs) =========================
|
||||
//=============================================================================
|
||||
// @section lcd
|
||||
|
||||
//
|
||||
// RepRapDiscount Smart Controller.
|
||||
|
|
@ -3166,7 +3192,7 @@
|
|||
//=============================== Extra Features ==============================
|
||||
//=============================================================================
|
||||
|
||||
// @section extras
|
||||
// @section fans
|
||||
|
||||
// Set number of user-controlled fans. Disable to use all board-defined fans.
|
||||
// :[1,2,3,4,5,6,7,8]
|
||||
|
|
@ -3190,14 +3216,18 @@
|
|||
// duty cycle is attained.
|
||||
//#define SOFT_PWM_DITHER
|
||||
|
||||
// @section extras
|
||||
|
||||
// Support for the BariCUDA Paste Extruder
|
||||
//#define BARICUDA
|
||||
|
||||
// @section lights
|
||||
|
||||
// Temperature status LEDs that display the hotend and bed temperature.
|
||||
// If all hotends, bed temperature, and target temperature are under 54C
|
||||
// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis)
|
||||
//#define TEMP_STAT_LEDS
|
||||
|
||||
// Support for the BariCUDA Paste Extruder
|
||||
//#define BARICUDA
|
||||
|
||||
// Support for BlinkM/CyzRgb
|
||||
//#define BLINKM
|
||||
|
||||
|
|
@ -3283,6 +3313,8 @@
|
|||
#define PRINTER_EVENT_LEDS
|
||||
#endif
|
||||
|
||||
// @section servos
|
||||
|
||||
/**
|
||||
* Number of servos
|
||||
*
|
||||
|
|
|
|||
|
|
@ -32,6 +32,24 @@
|
|||
*/
|
||||
#define CONFIGURATION_ADV_H_VERSION 02010100
|
||||
|
||||
// @section develop
|
||||
|
||||
/**
|
||||
* Configuration Dump to JSON and INI format
|
||||
*
|
||||
* Dump the configuration as part of the build. (See signature.py)
|
||||
* Output files are saved with the build (e.g., .pio/build/mega2560).
|
||||
*
|
||||
* See `build_all_examples --ini` as an example of config.ini archiving.
|
||||
*
|
||||
* 1 = marlin_config.json - Dictionary containing the configuration.
|
||||
* This file is also generated for CONFIGURATION_EMBEDDING.
|
||||
* 2 = config.ini - File format for PlatformIO preprocessing.
|
||||
* 3 = schema.json - The entire configuration schema. (13 = pattern groups)
|
||||
* 4 = schema.yml - The entire configuration schema.
|
||||
*/
|
||||
//#define CONFIG_DUMP // :[1:'JSON', 2:'config.ini', 3:'schema.json', 4:'schema.yml']
|
||||
|
||||
//===========================================================================
|
||||
//============================= Thermal Settings ============================
|
||||
//===========================================================================
|
||||
|
|
@ -2558,6 +2576,8 @@
|
|||
#endif
|
||||
#endif // HAS_MULTI_EXTRUDER
|
||||
|
||||
// @section advanced pause
|
||||
|
||||
/**
|
||||
* Advanced Pause for Filament Change
|
||||
* - Adds the G-code M600 Filament Change to initiate a filament change.
|
||||
|
|
@ -2616,13 +2636,12 @@
|
|||
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
|
||||
#endif
|
||||
|
||||
// @section tmc
|
||||
|
||||
/**
|
||||
* TMC26X Stepper Driver options
|
||||
*
|
||||
* The TMC26XStepper library is required for this stepper driver.
|
||||
* https://github.com/trinamic/TMC26XStepper
|
||||
* @section tmc/tmc26x
|
||||
*/
|
||||
#if HAS_DRIVER(TMC26X)
|
||||
|
||||
|
|
@ -2760,8 +2779,6 @@
|
|||
|
||||
#endif // TMC26X
|
||||
|
||||
// @section tmc_smart
|
||||
|
||||
/**
|
||||
* To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode
|
||||
* connect your SPI pins to the hardware SPI interface on your board and define
|
||||
|
|
@ -2777,6 +2794,7 @@
|
|||
*
|
||||
* TMCStepper library is required to use TMC stepper drivers.
|
||||
* https://github.com/teemuatlut/TMCStepper
|
||||
* @section tmc/config
|
||||
*/
|
||||
#if HAS_TRINAMIC_CONFIG
|
||||
|
||||
|
|
@ -3000,6 +3018,8 @@
|
|||
//#define E7_HOLD_MULTIPLIER 0.5
|
||||
#endif
|
||||
|
||||
// @section tmc/spi
|
||||
|
||||
/**
|
||||
* Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here.
|
||||
* The default pins can be found in your board's pins file.
|
||||
|
|
@ -3037,6 +3057,8 @@
|
|||
//#define TMC_SW_MISO -1
|
||||
//#define TMC_SW_SCK -1
|
||||
|
||||
// @section tmc/serial
|
||||
|
||||
/**
|
||||
* Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
|
||||
* Set the address using jumpers on pins MS1 and MS2.
|
||||
|
|
@ -3072,6 +3094,8 @@
|
|||
//#define E6_SLAVE_ADDRESS 0
|
||||
//#define E7_SLAVE_ADDRESS 0
|
||||
|
||||
// @section tmc/smart
|
||||
|
||||
/**
|
||||
* Software enable
|
||||
*
|
||||
|
|
@ -3080,6 +3104,8 @@
|
|||
*/
|
||||
//#define SOFTWARE_DRIVER_ENABLE
|
||||
|
||||
// @section tmc/stealthchop
|
||||
|
||||
/**
|
||||
* TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only
|
||||
* Use Trinamic's ultra quiet stepping mode.
|
||||
|
|
@ -3134,6 +3160,8 @@
|
|||
//#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
|
||||
//#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
|
||||
|
||||
// @section tmc/status
|
||||
|
||||
/**
|
||||
* Monitor Trinamic drivers
|
||||
* for error conditions like overtemperature and short to ground.
|
||||
|
|
@ -3153,6 +3181,8 @@
|
|||
#define STOP_ON_ERROR
|
||||
#endif
|
||||
|
||||
// @section tmc/hybrid
|
||||
|
||||
/**
|
||||
* TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only
|
||||
* The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD.
|
||||
|
|
@ -3209,6 +3239,7 @@
|
|||
* homing and adds a guard period for endstop triggering.
|
||||
*
|
||||
* Comment *_STALL_SENSITIVITY to disable sensorless homing for that axis.
|
||||
* @section tmc/stallguard
|
||||
*/
|
||||
//#define SENSORLESS_HOMING // StallGuard capable drivers only
|
||||
|
||||
|
|
@ -3232,6 +3263,8 @@
|
|||
//#define IMPROVE_HOMING_RELIABILITY
|
||||
#endif
|
||||
|
||||
// @section tmc/config
|
||||
|
||||
/**
|
||||
* TMC Homing stepper phase.
|
||||
*
|
||||
|
|
@ -3312,7 +3345,7 @@
|
|||
#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave
|
||||
#endif
|
||||
|
||||
// @section extras
|
||||
// @section photo
|
||||
|
||||
/**
|
||||
* Photo G-code
|
||||
|
|
@ -3355,6 +3388,8 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
// @section cnc
|
||||
|
||||
/**
|
||||
* Spindle & Laser control
|
||||
*
|
||||
|
|
@ -3559,6 +3594,8 @@
|
|||
#define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
|
||||
#endif
|
||||
|
||||
// @section filament width
|
||||
|
||||
/**
|
||||
* Filament Width Sensor
|
||||
*
|
||||
|
|
@ -3592,6 +3629,8 @@
|
|||
//#define FILAMENT_LCD_DISPLAY
|
||||
#endif
|
||||
|
||||
// @section power
|
||||
|
||||
/**
|
||||
* Power Monitor
|
||||
* Monitor voltage (V) and/or current (A), and -when possible- power (W)
|
||||
|
|
@ -3615,6 +3654,8 @@
|
|||
#define POWER_MONITOR_VOLTAGE_OFFSET 0 // Offset (in volts) applied to the calculated voltage
|
||||
#endif
|
||||
|
||||
// @section safety
|
||||
|
||||
/**
|
||||
* Stepper Driver Anti-SNAFU Protection
|
||||
*
|
||||
|
|
@ -3624,6 +3665,8 @@
|
|||
*/
|
||||
//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
|
||||
|
||||
// @section cnc
|
||||
|
||||
/**
|
||||
* CNC Coordinate Systems
|
||||
*
|
||||
|
|
@ -3640,6 +3683,8 @@
|
|||
*/
|
||||
//#define CNC_DRILLING_CYCLE
|
||||
|
||||
// @section reporting
|
||||
|
||||
/**
|
||||
* Auto-report fan speed with M123 S<seconds>
|
||||
* Requires fans with tachometer pins
|
||||
|
|
@ -3667,6 +3712,8 @@
|
|||
//#define M115_GEOMETRY_REPORT
|
||||
#endif
|
||||
|
||||
// @section security
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
|
|
@ -3674,6 +3721,8 @@
|
|||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
// @section volumetrics
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
|
|
@ -3702,14 +3751,7 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Enable this option for a leaner build of Marlin that removes all
|
||||
* workspace offsets, simplifying coordinate transformations, leveling, etc.
|
||||
*
|
||||
* - M206 and M428 are disabled.
|
||||
* - G92 will revert to its behavior from Marlin 1.0.
|
||||
*/
|
||||
//#define NO_WORKSPACE_OFFSETS
|
||||
// @section reporting
|
||||
|
||||
// Extra options for the M114 "Current Position" report
|
||||
//#define M114_DETAIL // Use 'M114` for details to check planner calculations
|
||||
|
|
@ -3718,6 +3760,8 @@
|
|||
|
||||
//#define REPORT_FAN_CHANGE // Report the new fan speed when changed by M106 (and others)
|
||||
|
||||
// @section gcode
|
||||
|
||||
/**
|
||||
* Spend 28 bytes of SRAM to optimize the G-code parser
|
||||
*/
|
||||
|
|
@ -3735,6 +3779,15 @@
|
|||
|
||||
//#define REPETIER_GCODE_M360 // Add commands originally from Repetier FW
|
||||
|
||||
/**
|
||||
* Enable this option for a leaner build of Marlin that removes all
|
||||
* workspace offsets, simplifying coordinate transformations, leveling, etc.
|
||||
*
|
||||
* - M206 and M428 are disabled.
|
||||
* - G92 will revert to its behavior from Marlin 1.0.
|
||||
*/
|
||||
//#define NO_WORKSPACE_OFFSETS
|
||||
|
||||
/**
|
||||
* CNC G-code options
|
||||
* Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.
|
||||
|
|
@ -3751,6 +3804,8 @@
|
|||
#endif
|
||||
//#define G0_ANGULAR_FEEDRATE 2700 // (°/min)
|
||||
|
||||
// @section gcode
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
|
|
@ -3775,6 +3830,8 @@
|
|||
* Up to 25 may be defined, but the actual number is LCD-dependent.
|
||||
*/
|
||||
|
||||
// @section custom main menu
|
||||
|
||||
// Custom Menu: Main Menu
|
||||
//#define CUSTOM_MENU_MAIN
|
||||
#if ENABLED(CUSTOM_MENU_MAIN)
|
||||
|
|
@ -3805,6 +3862,8 @@
|
|||
//#define MAIN_MENU_ITEM_5_CONFIRM
|
||||
#endif
|
||||
|
||||
// @section custom config menu
|
||||
|
||||
// Custom Menu: Configuration Menu
|
||||
//#define CUSTOM_MENU_CONFIG
|
||||
#if ENABLED(CUSTOM_MENU_CONFIG)
|
||||
|
|
@ -3835,6 +3894,8 @@
|
|||
//#define CONFIG_MENU_ITEM_5_CONFIRM
|
||||
#endif
|
||||
|
||||
// @section custom buttons
|
||||
|
||||
/**
|
||||
* User-defined buttons to run custom G-code.
|
||||
* Up to 25 may be defined.
|
||||
|
|
@ -3866,6 +3927,8 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
// @section host
|
||||
|
||||
/**
|
||||
* Host Action Commands
|
||||
*
|
||||
|
|
@ -3891,6 +3954,8 @@
|
|||
//#define HOST_SHUTDOWN_MENU_ITEM // Add a menu item that tells the host to shut down
|
||||
#endif
|
||||
|
||||
// @section extras
|
||||
|
||||
/**
|
||||
* Cancel Objects
|
||||
*
|
||||
|
|
@ -3912,6 +3977,7 @@
|
|||
* Alternative Supplier: https://reliabuild3d.com/
|
||||
*
|
||||
* Reliabuild encoders have been modified to improve reliability.
|
||||
* @section i2c encoders
|
||||
*/
|
||||
|
||||
//#define I2C_POSITION_ENCODERS
|
||||
|
|
@ -3983,6 +4049,7 @@
|
|||
|
||||
/**
|
||||
* Analog Joystick(s)
|
||||
* @section joystick
|
||||
*/
|
||||
//#define JOYSTICK
|
||||
#if ENABLED(JOYSTICK)
|
||||
|
|
@ -4007,6 +4074,7 @@
|
|||
* Modern replacement for the Prusa TMC_Z_CALIBRATION.
|
||||
* Adds capability to work with any adjustable current drivers.
|
||||
* Implemented as G34 because M915 is deprecated.
|
||||
* @section calibrate
|
||||
*/
|
||||
//#define MECHANICAL_GANTRY_CALIBRATION
|
||||
#if ENABLED(MECHANICAL_GANTRY_CALIBRATION)
|
||||
|
|
@ -4024,6 +4092,7 @@
|
|||
/**
|
||||
* Instant freeze / unfreeze functionality
|
||||
* Potentially useful for emergency stop that allows being resumed.
|
||||
* @section interface
|
||||
*/
|
||||
//#define FREEZE_FEATURE
|
||||
#if ENABLED(FREEZE_FEATURE)
|
||||
|
|
@ -4036,6 +4105,7 @@
|
|||
*
|
||||
* Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display.
|
||||
* Requires 3 signal wires. Some useful debug options are included to demonstrate its usage.
|
||||
* @section debug matrix
|
||||
*/
|
||||
//#define MAX7219_DEBUG
|
||||
#if ENABLED(MAX7219_DEBUG)
|
||||
|
|
@ -4074,6 +4144,7 @@
|
|||
* Support for Synchronized Z moves when used with NanoDLP. G0/G1 axis moves will
|
||||
* output a "Z_move_comp" string to enable synchronization with DLP projector exposure.
|
||||
* This feature allows you to use [[WaitForDoneMessage]] instead of M400 commands.
|
||||
* @section nanodlp
|
||||
*/
|
||||
//#define NANODLP_Z_SYNC
|
||||
#if ENABLED(NANODLP_Z_SYNC)
|
||||
|
|
@ -4082,6 +4153,7 @@
|
|||
|
||||
/**
|
||||
* Ethernet. Use M552 to enable and set the IP address.
|
||||
* @section network
|
||||
*/
|
||||
#if HAS_ETHERNET
|
||||
#define MAC_ADDRESS { 0xDE, 0xAD, 0xBE, 0xEF, 0xF0, 0x0D } // A MAC address unique to your network
|
||||
|
|
@ -4109,6 +4181,8 @@
|
|||
//#include "Configuration_Secure.h" // External file with WiFi SSID / Password
|
||||
#endif
|
||||
|
||||
// @section multi-material
|
||||
|
||||
/**
|
||||
* Průša Multi-Material Unit (MMU)
|
||||
* Enable in Configuration.h
|
||||
|
|
@ -4216,6 +4290,7 @@
|
|||
|
||||
/**
|
||||
* Advanced Print Counter settings
|
||||
* @section stats
|
||||
*/
|
||||
#if ENABLED(PRINTCOUNTER)
|
||||
#define SERVICE_WARNING_BUZZES 3
|
||||
|
|
|
|||
|
|
@ -114,6 +114,7 @@
|
|||
* :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
|
||||
*/
|
||||
#define BAUDRATE 115200
|
||||
|
||||
//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate
|
||||
|
||||
/**
|
||||
|
|
@ -122,7 +123,7 @@
|
|||
* :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
//#define SERIAL_PORT_2 -1
|
||||
//#define BAUDRATE_2 250000 // Enable to override BAUDRATE
|
||||
//#define BAUDRATE_2 250000 // :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] Enable to override BAUDRATE
|
||||
|
||||
/**
|
||||
* Select a third serial port on the board to use for communication with the host.
|
||||
|
|
@ -130,7 +131,7 @@
|
|||
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
//#define SERIAL_PORT_3 1
|
||||
//#define BAUDRATE_3 250000 // Enable to override BAUDRATE
|
||||
//#define BAUDRATE_3 250000 // :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] Enable to override BAUDRATE
|
||||
|
||||
// Enable the Bluetooth serial interface on AT90USB devices
|
||||
//#define BLUETOOTH
|
||||
|
|
@ -389,7 +390,7 @@
|
|||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
// @section psu control
|
||||
|
||||
/**
|
||||
* Power Supply Control
|
||||
|
|
@ -625,6 +626,8 @@
|
|||
//============================= PID Settings ================================
|
||||
//===========================================================================
|
||||
|
||||
// @section hotend temp
|
||||
|
||||
// Enable PIDTEMP for PID control or MPCTEMP for Predictive Model.
|
||||
// temperature control. Disable both for bang-bang heating.
|
||||
#define PIDTEMP // See the PID Tuning Guide at https://reprap.org/wiki/PID_Tuning
|
||||
|
|
@ -635,7 +638,8 @@
|
|||
#define PID_K1 0.95 // Smoothing factor within any PID loop
|
||||
|
||||
#if ENABLED(PIDTEMP)
|
||||
//#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders)
|
||||
//#define PID_DEBUG // Print PID debug data to the serial port. Use 'M303 D' to toggle activation.
|
||||
//#define PID_PARAMS_PER_HOTEND // Use separate PID parameters for each extruder (useful for mismatched extruders)
|
||||
// Set/get with G-code: M301 E[extruder number, 0-2]
|
||||
|
||||
// A20M [@thinkyhead]
|
||||
|
|
@ -658,6 +662,7 @@
|
|||
* Use a physical model of the hotend to control temperature. When configured correctly
|
||||
* this gives better responsiveness and stability than PID and it also removes the need
|
||||
* for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model.
|
||||
* @section mpctemp
|
||||
*/
|
||||
#if ENABLED(MPCTEMP)
|
||||
//#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash)
|
||||
|
|
@ -725,7 +730,7 @@
|
|||
|
||||
#if ENABLED(PIDTEMPBED)
|
||||
//#define MIN_BED_POWER 0
|
||||
//#define PID_BED_DEBUG // Sends debug data to the serial port.
|
||||
//#define PID_BED_DEBUG // Print Bed PID debug data to the serial port.
|
||||
|
||||
// MeCreator2 generated by Autotune
|
||||
#define DEFAULT_bedKp 182.46 // 175.68 189.95
|
||||
|
|
@ -752,6 +757,7 @@
|
|||
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 200W
|
||||
* heater. If your configuration is significantly different than this and you don't understand
|
||||
* the issues involved, don't use chamber PID until someone else verifies that your hardware works.
|
||||
* @section chamber temp
|
||||
*/
|
||||
//#define PIDTEMPCHAMBER
|
||||
//#define CHAMBER_LIMIT_SWITCHING
|
||||
|
|
@ -766,7 +772,7 @@
|
|||
|
||||
#if ENABLED(PIDTEMPCHAMBER)
|
||||
#define MIN_CHAMBER_POWER 0
|
||||
//#define PID_CHAMBER_DEBUG // Sends debug data to the serial port.
|
||||
//#define PID_CHAMBER_DEBUG // Print Chamber PID debug data to the serial port.
|
||||
|
||||
// Lasko "MyHeat Personal Heater" (200w) modified with a Fotek SSR-10DA to control only the heating element
|
||||
// and placed inside the small Creality printer enclosure tent.
|
||||
|
|
@ -780,7 +786,6 @@
|
|||
#endif // PIDTEMPCHAMBER
|
||||
|
||||
#if ANY(PIDTEMP, PIDTEMPBED, PIDTEMPCHAMBER)
|
||||
//#define PID_DEBUG // Sends debug data to the serial port. Use 'M303 D' to toggle activation.
|
||||
//#define PID_OPENLOOP // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX
|
||||
//#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay
|
||||
#define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature
|
||||
|
|
@ -790,7 +795,7 @@
|
|||
#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of flash)
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
// @section safety
|
||||
|
||||
/**
|
||||
* Prevent extrusion if the temperature is below EXTRUDE_MINTEMP.
|
||||
|
|
@ -858,6 +863,8 @@
|
|||
#define POLAR_SEGMENTS_PER_SECOND 5
|
||||
#endif
|
||||
|
||||
// @section delta
|
||||
|
||||
// Enable for DELTA kinematics and configure below
|
||||
//#define DELTA
|
||||
#if ENABLED(DELTA)
|
||||
|
|
@ -917,6 +924,8 @@
|
|||
//#define DELTA_DIAGONAL_ROD_TRIM_TOWER { 0.0, 0.0, 0.0 }
|
||||
#endif
|
||||
|
||||
// @section scara
|
||||
|
||||
/**
|
||||
* MORGAN_SCARA was developed by QHARLEY in South Africa in 2012-2013.
|
||||
* Implemented and slightly reworked by JCERNY in June, 2014.
|
||||
|
|
@ -960,6 +969,8 @@
|
|||
|
||||
#endif
|
||||
|
||||
// @section tpara
|
||||
|
||||
// Enable for TPARA kinematics and configure below
|
||||
//#define AXEL_TPARA
|
||||
#if ENABLED(AXEL_TPARA)
|
||||
|
|
@ -986,6 +997,8 @@
|
|||
#define PSI_HOMING_OFFSET 0
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
|
|
@ -997,7 +1010,7 @@
|
|||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
||||
// @section homing
|
||||
// @section endstops
|
||||
|
||||
// Specify here all the endstop connectors that are connected to any endstop or probe.
|
||||
// Almost all printers will be using one per axis. Probes will use one or more of the
|
||||
|
|
@ -1667,7 +1680,7 @@
|
|||
//#define V_HOME_DIR -1
|
||||
//#define W_HOME_DIR -1
|
||||
|
||||
// @section machine
|
||||
// @section geometry
|
||||
|
||||
// The size of the printable area
|
||||
#define X_BED_SIZE 255
|
||||
|
|
@ -2130,7 +2143,7 @@
|
|||
//============================= Additional Features ===========================
|
||||
//=============================================================================
|
||||
|
||||
// @section extras
|
||||
// @section eeprom
|
||||
|
||||
/**
|
||||
* EEPROM
|
||||
|
|
@ -2150,6 +2163,8 @@
|
|||
//#define EEPROM_INIT_NOW // Init EEPROM on first boot after a new build.
|
||||
#endif
|
||||
|
||||
// @section host
|
||||
|
||||
//
|
||||
// Host Keepalive
|
||||
//
|
||||
|
|
@ -2160,6 +2175,8 @@
|
|||
#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113.
|
||||
#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating
|
||||
|
||||
// @section units
|
||||
|
||||
//
|
||||
// G20/G21 Inch mode support
|
||||
//
|
||||
|
|
@ -2187,6 +2204,8 @@
|
|||
#define PREHEAT_2_TEMP_CHAMBER 35
|
||||
#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
|
||||
|
||||
// @section motion
|
||||
|
||||
/**
|
||||
* Nozzle Park
|
||||
*
|
||||
|
|
@ -2285,6 +2304,8 @@
|
|||
|
||||
#endif
|
||||
|
||||
// @section host
|
||||
|
||||
/**
|
||||
* Print Job Timer
|
||||
*
|
||||
|
|
@ -2311,6 +2332,8 @@
|
|||
*/
|
||||
#define PRINTJOB_TIMER_AUTOSTART
|
||||
|
||||
// @section stats
|
||||
|
||||
/**
|
||||
* Print Counter
|
||||
*
|
||||
|
|
@ -2328,6 +2351,8 @@
|
|||
#define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print
|
||||
#endif
|
||||
|
||||
// @section security
|
||||
|
||||
/**
|
||||
* Password
|
||||
*
|
||||
|
|
@ -2363,7 +2388,7 @@
|
|||
//============================= LCD and SD support ============================
|
||||
//=============================================================================
|
||||
|
||||
// @section lcd
|
||||
// @section interface
|
||||
|
||||
/**
|
||||
* LCD LANGUAGE
|
||||
|
|
@ -2519,6 +2544,7 @@
|
|||
//======================== LCD / Controller Selection =========================
|
||||
//======================== (Character-based LCDs) =========================
|
||||
//=============================================================================
|
||||
// @section lcd
|
||||
|
||||
//
|
||||
// RepRapDiscount Smart Controller.
|
||||
|
|
@ -3167,7 +3193,7 @@
|
|||
//=============================== Extra Features ==============================
|
||||
//=============================================================================
|
||||
|
||||
// @section extras
|
||||
// @section fans
|
||||
|
||||
// Set number of user-controlled fans. Disable to use all board-defined fans.
|
||||
// :[1,2,3,4,5,6,7,8]
|
||||
|
|
@ -3191,14 +3217,18 @@
|
|||
// duty cycle is attained.
|
||||
//#define SOFT_PWM_DITHER
|
||||
|
||||
// @section extras
|
||||
|
||||
// Support for the BariCUDA Paste Extruder
|
||||
//#define BARICUDA
|
||||
|
||||
// @section lights
|
||||
|
||||
// Temperature status LEDs that display the hotend and bed temperature.
|
||||
// If all hotends, bed temperature, and target temperature are under 54C
|
||||
// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis)
|
||||
//#define TEMP_STAT_LEDS
|
||||
|
||||
// Support for the BariCUDA Paste Extruder
|
||||
//#define BARICUDA
|
||||
|
||||
// Support for BlinkM/CyzRgb
|
||||
//#define BLINKM
|
||||
|
||||
|
|
@ -3284,6 +3314,8 @@
|
|||
#define PRINTER_EVENT_LEDS
|
||||
#endif
|
||||
|
||||
// @section servos
|
||||
|
||||
/**
|
||||
* Number of servos
|
||||
*
|
||||
|
|
|
|||
|
|
@ -32,6 +32,24 @@
|
|||
*/
|
||||
#define CONFIGURATION_ADV_H_VERSION 02010100
|
||||
|
||||
// @section develop
|
||||
|
||||
/**
|
||||
* Configuration Dump to JSON and INI format
|
||||
*
|
||||
* Dump the configuration as part of the build. (See signature.py)
|
||||
* Output files are saved with the build (e.g., .pio/build/mega2560).
|
||||
*
|
||||
* See `build_all_examples --ini` as an example of config.ini archiving.
|
||||
*
|
||||
* 1 = marlin_config.json - Dictionary containing the configuration.
|
||||
* This file is also generated for CONFIGURATION_EMBEDDING.
|
||||
* 2 = config.ini - File format for PlatformIO preprocessing.
|
||||
* 3 = schema.json - The entire configuration schema. (13 = pattern groups)
|
||||
* 4 = schema.yml - The entire configuration schema.
|
||||
*/
|
||||
//#define CONFIG_DUMP // :[1:'JSON', 2:'config.ini', 3:'schema.json', 4:'schema.yml']
|
||||
|
||||
//===========================================================================
|
||||
//============================= Thermal Settings ============================
|
||||
//===========================================================================
|
||||
|
|
@ -2558,6 +2576,8 @@
|
|||
#endif
|
||||
#endif // HAS_MULTI_EXTRUDER
|
||||
|
||||
// @section advanced pause
|
||||
|
||||
/**
|
||||
* Advanced Pause for Filament Change
|
||||
* - Adds the G-code M600 Filament Change to initiate a filament change.
|
||||
|
|
@ -2616,13 +2636,12 @@
|
|||
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
|
||||
#endif
|
||||
|
||||
// @section tmc
|
||||
|
||||
/**
|
||||
* TMC26X Stepper Driver options
|
||||
*
|
||||
* The TMC26XStepper library is required for this stepper driver.
|
||||
* https://github.com/trinamic/TMC26XStepper
|
||||
* @section tmc/tmc26x
|
||||
*/
|
||||
#if HAS_DRIVER(TMC26X)
|
||||
|
||||
|
|
@ -2760,8 +2779,6 @@
|
|||
|
||||
#endif // TMC26X
|
||||
|
||||
// @section tmc_smart
|
||||
|
||||
/**
|
||||
* To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode
|
||||
* connect your SPI pins to the hardware SPI interface on your board and define
|
||||
|
|
@ -2777,6 +2794,7 @@
|
|||
*
|
||||
* TMCStepper library is required to use TMC stepper drivers.
|
||||
* https://github.com/teemuatlut/TMCStepper
|
||||
* @section tmc/config
|
||||
*/
|
||||
#if HAS_TRINAMIC_CONFIG
|
||||
|
||||
|
|
@ -3000,6 +3018,8 @@
|
|||
//#define E7_HOLD_MULTIPLIER 0.5
|
||||
#endif
|
||||
|
||||
// @section tmc/spi
|
||||
|
||||
/**
|
||||
* Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here.
|
||||
* The default pins can be found in your board's pins file.
|
||||
|
|
@ -3037,6 +3057,8 @@
|
|||
//#define TMC_SW_MISO -1
|
||||
//#define TMC_SW_SCK -1
|
||||
|
||||
// @section tmc/serial
|
||||
|
||||
/**
|
||||
* Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
|
||||
* Set the address using jumpers on pins MS1 and MS2.
|
||||
|
|
@ -3072,6 +3094,8 @@
|
|||
//#define E6_SLAVE_ADDRESS 0
|
||||
//#define E7_SLAVE_ADDRESS 0
|
||||
|
||||
// @section tmc/smart
|
||||
|
||||
/**
|
||||
* Software enable
|
||||
*
|
||||
|
|
@ -3080,6 +3104,8 @@
|
|||
*/
|
||||
//#define SOFTWARE_DRIVER_ENABLE
|
||||
|
||||
// @section tmc/stealthchop
|
||||
|
||||
/**
|
||||
* TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only
|
||||
* Use Trinamic's ultra quiet stepping mode.
|
||||
|
|
@ -3134,6 +3160,8 @@
|
|||
//#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
|
||||
//#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
|
||||
|
||||
// @section tmc/status
|
||||
|
||||
/**
|
||||
* Monitor Trinamic drivers
|
||||
* for error conditions like overtemperature and short to ground.
|
||||
|
|
@ -3153,6 +3181,8 @@
|
|||
#define STOP_ON_ERROR
|
||||
#endif
|
||||
|
||||
// @section tmc/hybrid
|
||||
|
||||
/**
|
||||
* TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only
|
||||
* The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD.
|
||||
|
|
@ -3209,6 +3239,7 @@
|
|||
* homing and adds a guard period for endstop triggering.
|
||||
*
|
||||
* Comment *_STALL_SENSITIVITY to disable sensorless homing for that axis.
|
||||
* @section tmc/stallguard
|
||||
*/
|
||||
//#define SENSORLESS_HOMING // StallGuard capable drivers only
|
||||
|
||||
|
|
@ -3232,6 +3263,8 @@
|
|||
//#define IMPROVE_HOMING_RELIABILITY
|
||||
#endif
|
||||
|
||||
// @section tmc/config
|
||||
|
||||
/**
|
||||
* TMC Homing stepper phase.
|
||||
*
|
||||
|
|
@ -3312,7 +3345,7 @@
|
|||
#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave
|
||||
#endif
|
||||
|
||||
// @section extras
|
||||
// @section photo
|
||||
|
||||
/**
|
||||
* Photo G-code
|
||||
|
|
@ -3355,6 +3388,8 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
// @section cnc
|
||||
|
||||
/**
|
||||
* Spindle & Laser control
|
||||
*
|
||||
|
|
@ -3559,6 +3594,8 @@
|
|||
#define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
|
||||
#endif
|
||||
|
||||
// @section filament width
|
||||
|
||||
/**
|
||||
* Filament Width Sensor
|
||||
*
|
||||
|
|
@ -3592,6 +3629,8 @@
|
|||
//#define FILAMENT_LCD_DISPLAY
|
||||
#endif
|
||||
|
||||
// @section power
|
||||
|
||||
/**
|
||||
* Power Monitor
|
||||
* Monitor voltage (V) and/or current (A), and -when possible- power (W)
|
||||
|
|
@ -3615,6 +3654,8 @@
|
|||
#define POWER_MONITOR_VOLTAGE_OFFSET 0 // Offset (in volts) applied to the calculated voltage
|
||||
#endif
|
||||
|
||||
// @section safety
|
||||
|
||||
/**
|
||||
* Stepper Driver Anti-SNAFU Protection
|
||||
*
|
||||
|
|
@ -3624,6 +3665,8 @@
|
|||
*/
|
||||
//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
|
||||
|
||||
// @section cnc
|
||||
|
||||
/**
|
||||
* CNC Coordinate Systems
|
||||
*
|
||||
|
|
@ -3640,6 +3683,8 @@
|
|||
*/
|
||||
//#define CNC_DRILLING_CYCLE
|
||||
|
||||
// @section reporting
|
||||
|
||||
/**
|
||||
* Auto-report fan speed with M123 S<seconds>
|
||||
* Requires fans with tachometer pins
|
||||
|
|
@ -3667,6 +3712,8 @@
|
|||
//#define M115_GEOMETRY_REPORT
|
||||
#endif
|
||||
|
||||
// @section security
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
|
|
@ -3674,6 +3721,8 @@
|
|||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
// @section volumetrics
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
|
|
@ -3702,14 +3751,7 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Enable this option for a leaner build of Marlin that removes all
|
||||
* workspace offsets, simplifying coordinate transformations, leveling, etc.
|
||||
*
|
||||
* - M206 and M428 are disabled.
|
||||
* - G92 will revert to its behavior from Marlin 1.0.
|
||||
*/
|
||||
//#define NO_WORKSPACE_OFFSETS
|
||||
// @section reporting
|
||||
|
||||
// Extra options for the M114 "Current Position" report
|
||||
//#define M114_DETAIL // Use 'M114` for details to check planner calculations
|
||||
|
|
@ -3718,6 +3760,8 @@
|
|||
|
||||
//#define REPORT_FAN_CHANGE // Report the new fan speed when changed by M106 (and others)
|
||||
|
||||
// @section gcode
|
||||
|
||||
/**
|
||||
* Spend 28 bytes of SRAM to optimize the G-code parser
|
||||
*/
|
||||
|
|
@ -3735,6 +3779,15 @@
|
|||
|
||||
//#define REPETIER_GCODE_M360 // Add commands originally from Repetier FW
|
||||
|
||||
/**
|
||||
* Enable this option for a leaner build of Marlin that removes all
|
||||
* workspace offsets, simplifying coordinate transformations, leveling, etc.
|
||||
*
|
||||
* - M206 and M428 are disabled.
|
||||
* - G92 will revert to its behavior from Marlin 1.0.
|
||||
*/
|
||||
//#define NO_WORKSPACE_OFFSETS
|
||||
|
||||
/**
|
||||
* CNC G-code options
|
||||
* Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.
|
||||
|
|
@ -3751,6 +3804,8 @@
|
|||
#endif
|
||||
//#define G0_ANGULAR_FEEDRATE 2700 // (°/min)
|
||||
|
||||
// @section gcode
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
|
|
@ -3775,6 +3830,8 @@
|
|||
* Up to 25 may be defined, but the actual number is LCD-dependent.
|
||||
*/
|
||||
|
||||
// @section custom main menu
|
||||
|
||||
// Custom Menu: Main Menu
|
||||
//#define CUSTOM_MENU_MAIN
|
||||
#if ENABLED(CUSTOM_MENU_MAIN)
|
||||
|
|
@ -3805,6 +3862,8 @@
|
|||
//#define MAIN_MENU_ITEM_5_CONFIRM
|
||||
#endif
|
||||
|
||||
// @section custom config menu
|
||||
|
||||
// Custom Menu: Configuration Menu
|
||||
//#define CUSTOM_MENU_CONFIG
|
||||
#if ENABLED(CUSTOM_MENU_CONFIG)
|
||||
|
|
@ -3835,6 +3894,8 @@
|
|||
//#define CONFIG_MENU_ITEM_5_CONFIRM
|
||||
#endif
|
||||
|
||||
// @section custom buttons
|
||||
|
||||
/**
|
||||
* User-defined buttons to run custom G-code.
|
||||
* Up to 25 may be defined.
|
||||
|
|
@ -3866,6 +3927,8 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
// @section host
|
||||
|
||||
/**
|
||||
* Host Action Commands
|
||||
*
|
||||
|
|
@ -3891,6 +3954,8 @@
|
|||
//#define HOST_SHUTDOWN_MENU_ITEM // Add a menu item that tells the host to shut down
|
||||
#endif
|
||||
|
||||
// @section extras
|
||||
|
||||
/**
|
||||
* Cancel Objects
|
||||
*
|
||||
|
|
@ -3912,6 +3977,7 @@
|
|||
* Alternative Supplier: https://reliabuild3d.com/
|
||||
*
|
||||
* Reliabuild encoders have been modified to improve reliability.
|
||||
* @section i2c encoders
|
||||
*/
|
||||
|
||||
//#define I2C_POSITION_ENCODERS
|
||||
|
|
@ -3983,6 +4049,7 @@
|
|||
|
||||
/**
|
||||
* Analog Joystick(s)
|
||||
* @section joystick
|
||||
*/
|
||||
//#define JOYSTICK
|
||||
#if ENABLED(JOYSTICK)
|
||||
|
|
@ -4007,6 +4074,7 @@
|
|||
* Modern replacement for the Prusa TMC_Z_CALIBRATION.
|
||||
* Adds capability to work with any adjustable current drivers.
|
||||
* Implemented as G34 because M915 is deprecated.
|
||||
* @section calibrate
|
||||
*/
|
||||
//#define MECHANICAL_GANTRY_CALIBRATION
|
||||
#if ENABLED(MECHANICAL_GANTRY_CALIBRATION)
|
||||
|
|
@ -4024,6 +4092,7 @@
|
|||
/**
|
||||
* Instant freeze / unfreeze functionality
|
||||
* Potentially useful for emergency stop that allows being resumed.
|
||||
* @section interface
|
||||
*/
|
||||
//#define FREEZE_FEATURE
|
||||
#if ENABLED(FREEZE_FEATURE)
|
||||
|
|
@ -4036,6 +4105,7 @@
|
|||
*
|
||||
* Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display.
|
||||
* Requires 3 signal wires. Some useful debug options are included to demonstrate its usage.
|
||||
* @section debug matrix
|
||||
*/
|
||||
//#define MAX7219_DEBUG
|
||||
#if ENABLED(MAX7219_DEBUG)
|
||||
|
|
@ -4074,6 +4144,7 @@
|
|||
* Support for Synchronized Z moves when used with NanoDLP. G0/G1 axis moves will
|
||||
* output a "Z_move_comp" string to enable synchronization with DLP projector exposure.
|
||||
* This feature allows you to use [[WaitForDoneMessage]] instead of M400 commands.
|
||||
* @section nanodlp
|
||||
*/
|
||||
//#define NANODLP_Z_SYNC
|
||||
#if ENABLED(NANODLP_Z_SYNC)
|
||||
|
|
@ -4082,6 +4153,7 @@
|
|||
|
||||
/**
|
||||
* Ethernet. Use M552 to enable and set the IP address.
|
||||
* @section network
|
||||
*/
|
||||
#if HAS_ETHERNET
|
||||
#define MAC_ADDRESS { 0xDE, 0xAD, 0xBE, 0xEF, 0xF0, 0x0D } // A MAC address unique to your network
|
||||
|
|
@ -4109,6 +4181,8 @@
|
|||
//#include "Configuration_Secure.h" // External file with WiFi SSID / Password
|
||||
#endif
|
||||
|
||||
// @section multi-material
|
||||
|
||||
/**
|
||||
* Průša Multi-Material Unit (MMU)
|
||||
* Enable in Configuration.h
|
||||
|
|
@ -4216,6 +4290,7 @@
|
|||
|
||||
/**
|
||||
* Advanced Print Counter settings
|
||||
* @section stats
|
||||
*/
|
||||
#if ENABLED(PRINTCOUNTER)
|
||||
#define SERVICE_WARNING_BUZZES 3
|
||||
|
|
|
|||
|
|
@ -114,6 +114,7 @@
|
|||
* :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
|
||||
*/
|
||||
#define BAUDRATE 250000
|
||||
|
||||
//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate
|
||||
|
||||
/**
|
||||
|
|
@ -122,7 +123,7 @@
|
|||
* :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
//#define SERIAL_PORT_2 -1
|
||||
//#define BAUDRATE_2 250000 // Enable to override BAUDRATE
|
||||
//#define BAUDRATE_2 250000 // :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] Enable to override BAUDRATE
|
||||
|
||||
/**
|
||||
* Select a third serial port on the board to use for communication with the host.
|
||||
|
|
@ -130,7 +131,7 @@
|
|||
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
//#define SERIAL_PORT_3 1
|
||||
//#define BAUDRATE_3 250000 // Enable to override BAUDRATE
|
||||
//#define BAUDRATE_3 250000 // :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] Enable to override BAUDRATE
|
||||
|
||||
// Enable the Bluetooth serial interface on AT90USB devices
|
||||
//#define BLUETOOTH
|
||||
|
|
@ -389,7 +390,7 @@
|
|||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
// @section psu control
|
||||
|
||||
/**
|
||||
* Power Supply Control
|
||||
|
|
@ -625,6 +626,8 @@
|
|||
//============================= PID Settings ================================
|
||||
//===========================================================================
|
||||
|
||||
// @section hotend temp
|
||||
|
||||
// Enable PIDTEMP for PID control or MPCTEMP for Predictive Model.
|
||||
// temperature control. Disable both for bang-bang heating.
|
||||
#define PIDTEMP // See the PID Tuning Guide at https://reprap.org/wiki/PID_Tuning
|
||||
|
|
@ -635,7 +638,8 @@
|
|||
#define PID_K1 0.95 // Smoothing factor within any PID loop
|
||||
|
||||
#if ENABLED(PIDTEMP)
|
||||
//#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders)
|
||||
//#define PID_DEBUG // Print PID debug data to the serial port. Use 'M303 D' to toggle activation.
|
||||
//#define PID_PARAMS_PER_HOTEND // Use separate PID parameters for each extruder (useful for mismatched extruders)
|
||||
// Set/get with G-code: M301 E[extruder number, 0-2]
|
||||
|
||||
#if ENABLED(PID_PARAMS_PER_HOTEND)
|
||||
|
|
@ -657,6 +661,7 @@
|
|||
* Use a physical model of the hotend to control temperature. When configured correctly
|
||||
* this gives better responsiveness and stability than PID and it also removes the need
|
||||
* for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model.
|
||||
* @section mpctemp
|
||||
*/
|
||||
#if ENABLED(MPCTEMP)
|
||||
//#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash)
|
||||
|
|
@ -724,7 +729,7 @@
|
|||
|
||||
#if ENABLED(PIDTEMPBED)
|
||||
//#define MIN_BED_POWER 0
|
||||
//#define PID_BED_DEBUG // Sends debug data to the serial port.
|
||||
//#define PID_BED_DEBUG // Print Bed PID debug data to the serial port.
|
||||
|
||||
#define DEFAULT_bedKp 369.610
|
||||
#define DEFAULT_bedKi 54.132
|
||||
|
|
@ -750,6 +755,7 @@
|
|||
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 200W
|
||||
* heater. If your configuration is significantly different than this and you don't understand
|
||||
* the issues involved, don't use chamber PID until someone else verifies that your hardware works.
|
||||
* @section chamber temp
|
||||
*/
|
||||
//#define PIDTEMPCHAMBER
|
||||
//#define CHAMBER_LIMIT_SWITCHING
|
||||
|
|
@ -764,7 +770,7 @@
|
|||
|
||||
#if ENABLED(PIDTEMPCHAMBER)
|
||||
#define MIN_CHAMBER_POWER 0
|
||||
//#define PID_CHAMBER_DEBUG // Sends debug data to the serial port.
|
||||
//#define PID_CHAMBER_DEBUG // Print Chamber PID debug data to the serial port.
|
||||
|
||||
// Lasko "MyHeat Personal Heater" (200w) modified with a Fotek SSR-10DA to control only the heating element
|
||||
// and placed inside the small Creality printer enclosure tent.
|
||||
|
|
@ -778,7 +784,6 @@
|
|||
#endif // PIDTEMPCHAMBER
|
||||
|
||||
#if ANY(PIDTEMP, PIDTEMPBED, PIDTEMPCHAMBER)
|
||||
//#define PID_DEBUG // Sends debug data to the serial port. Use 'M303 D' to toggle activation.
|
||||
//#define PID_OPENLOOP // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX
|
||||
//#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay
|
||||
#define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature
|
||||
|
|
@ -788,7 +793,7 @@
|
|||
//#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of flash)
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
// @section safety
|
||||
|
||||
/**
|
||||
* Prevent extrusion if the temperature is below EXTRUDE_MINTEMP.
|
||||
|
|
@ -856,6 +861,8 @@
|
|||
#define POLAR_SEGMENTS_PER_SECOND 5
|
||||
#endif
|
||||
|
||||
// @section delta
|
||||
|
||||
// Enable for DELTA kinematics and configure below
|
||||
//#define DELTA
|
||||
#if ENABLED(DELTA)
|
||||
|
|
@ -915,6 +922,8 @@
|
|||
//#define DELTA_DIAGONAL_ROD_TRIM_TOWER { 0.0, 0.0, 0.0 }
|
||||
#endif
|
||||
|
||||
// @section scara
|
||||
|
||||
/**
|
||||
* MORGAN_SCARA was developed by QHARLEY in South Africa in 2012-2013.
|
||||
* Implemented and slightly reworked by JCERNY in June, 2014.
|
||||
|
|
@ -958,6 +967,8 @@
|
|||
|
||||
#endif
|
||||
|
||||
// @section tpara
|
||||
|
||||
// Enable for TPARA kinematics and configure below
|
||||
//#define AXEL_TPARA
|
||||
#if ENABLED(AXEL_TPARA)
|
||||
|
|
@ -984,6 +995,8 @@
|
|||
#define PSI_HOMING_OFFSET 0
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
|
|
@ -995,7 +1008,7 @@
|
|||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
||||
// @section homing
|
||||
// @section endstops
|
||||
|
||||
// Specify here all the endstop connectors that are connected to any endstop or probe.
|
||||
// Almost all printers will be using one per axis. Probes will use one or more of the
|
||||
|
|
@ -1665,7 +1678,7 @@
|
|||
//#define V_HOME_DIR -1
|
||||
//#define W_HOME_DIR -1
|
||||
|
||||
// @section machine
|
||||
// @section geometry
|
||||
|
||||
// The size of the printable area
|
||||
#define X_BED_SIZE 320
|
||||
|
|
@ -2126,7 +2139,7 @@
|
|||
//============================= Additional Features ===========================
|
||||
//=============================================================================
|
||||
|
||||
// @section extras
|
||||
// @section eeprom
|
||||
|
||||
/**
|
||||
* EEPROM
|
||||
|
|
@ -2146,6 +2159,8 @@
|
|||
//#define EEPROM_INIT_NOW // Init EEPROM on first boot after a new build.
|
||||
#endif
|
||||
|
||||
// @section host
|
||||
|
||||
//
|
||||
// Host Keepalive
|
||||
//
|
||||
|
|
@ -2156,6 +2171,8 @@
|
|||
#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113.
|
||||
#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating
|
||||
|
||||
// @section units
|
||||
|
||||
//
|
||||
// G20/G21 Inch mode support
|
||||
//
|
||||
|
|
@ -2183,6 +2200,8 @@
|
|||
#define PREHEAT_2_TEMP_CHAMBER 35
|
||||
#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
|
||||
|
||||
// @section motion
|
||||
|
||||
/**
|
||||
* Nozzle Park
|
||||
*
|
||||
|
|
@ -2281,6 +2300,8 @@
|
|||
|
||||
#endif
|
||||
|
||||
// @section host
|
||||
|
||||
/**
|
||||
* Print Job Timer
|
||||
*
|
||||
|
|
@ -2307,6 +2328,8 @@
|
|||
*/
|
||||
#define PRINTJOB_TIMER_AUTOSTART
|
||||
|
||||
// @section stats
|
||||
|
||||
/**
|
||||
* Print Counter
|
||||
*
|
||||
|
|
@ -2324,6 +2347,8 @@
|
|||
#define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print
|
||||
#endif
|
||||
|
||||
// @section security
|
||||
|
||||
/**
|
||||
* Password
|
||||
*
|
||||
|
|
@ -2359,7 +2384,7 @@
|
|||
//============================= LCD and SD support ============================
|
||||
//=============================================================================
|
||||
|
||||
// @section lcd
|
||||
// @section interface
|
||||
|
||||
/**
|
||||
* LCD LANGUAGE
|
||||
|
|
@ -2516,6 +2541,7 @@
|
|||
//======================== LCD / Controller Selection =========================
|
||||
//======================== (Character-based LCDs) =========================
|
||||
//=============================================================================
|
||||
// @section lcd
|
||||
|
||||
//
|
||||
// RepRapDiscount Smart Controller.
|
||||
|
|
@ -3164,7 +3190,7 @@
|
|||
//=============================== Extra Features ==============================
|
||||
//=============================================================================
|
||||
|
||||
// @section extras
|
||||
// @section fans
|
||||
|
||||
// Set number of user-controlled fans. Disable to use all board-defined fans.
|
||||
// :[1,2,3,4,5,6,7,8]
|
||||
|
|
@ -3188,14 +3214,18 @@
|
|||
// duty cycle is attained.
|
||||
//#define SOFT_PWM_DITHER
|
||||
|
||||
// @section extras
|
||||
|
||||
// Support for the BariCUDA Paste Extruder
|
||||
//#define BARICUDA
|
||||
|
||||
// @section lights
|
||||
|
||||
// Temperature status LEDs that display the hotend and bed temperature.
|
||||
// If all hotends, bed temperature, and target temperature are under 54C
|
||||
// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis)
|
||||
//#define TEMP_STAT_LEDS
|
||||
|
||||
// Support for the BariCUDA Paste Extruder
|
||||
//#define BARICUDA
|
||||
|
||||
// Support for BlinkM/CyzRgb
|
||||
//#define BLINKM
|
||||
|
||||
|
|
@ -3281,6 +3311,8 @@
|
|||
#define PRINTER_EVENT_LEDS
|
||||
#endif
|
||||
|
||||
// @section servos
|
||||
|
||||
/**
|
||||
* Number of servos
|
||||
*
|
||||
|
|
|
|||
|
|
@ -32,6 +32,24 @@
|
|||
*/
|
||||
#define CONFIGURATION_ADV_H_VERSION 02010100
|
||||
|
||||
// @section develop
|
||||
|
||||
/**
|
||||
* Configuration Dump to JSON and INI format
|
||||
*
|
||||
* Dump the configuration as part of the build. (See signature.py)
|
||||
* Output files are saved with the build (e.g., .pio/build/mega2560).
|
||||
*
|
||||
* See `build_all_examples --ini` as an example of config.ini archiving.
|
||||
*
|
||||
* 1 = marlin_config.json - Dictionary containing the configuration.
|
||||
* This file is also generated for CONFIGURATION_EMBEDDING.
|
||||
* 2 = config.ini - File format for PlatformIO preprocessing.
|
||||
* 3 = schema.json - The entire configuration schema. (13 = pattern groups)
|
||||
* 4 = schema.yml - The entire configuration schema.
|
||||
*/
|
||||
//#define CONFIG_DUMP // :[1:'JSON', 2:'config.ini', 3:'schema.json', 4:'schema.yml']
|
||||
|
||||
//===========================================================================
|
||||
//============================= Thermal Settings ============================
|
||||
//===========================================================================
|
||||
|
|
@ -2558,6 +2576,8 @@
|
|||
#endif
|
||||
#endif // HAS_MULTI_EXTRUDER
|
||||
|
||||
// @section advanced pause
|
||||
|
||||
/**
|
||||
* Advanced Pause for Filament Change
|
||||
* - Adds the G-code M600 Filament Change to initiate a filament change.
|
||||
|
|
@ -2615,13 +2635,12 @@
|
|||
#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
|
||||
#endif
|
||||
|
||||
// @section tmc
|
||||
|
||||
/**
|
||||
* TMC26X Stepper Driver options
|
||||
*
|
||||
* The TMC26XStepper library is required for this stepper driver.
|
||||
* https://github.com/trinamic/TMC26XStepper
|
||||
* @section tmc/tmc26x
|
||||
*/
|
||||
#if HAS_DRIVER(TMC26X)
|
||||
|
||||
|
|
@ -2759,8 +2778,6 @@
|
|||
|
||||
#endif // TMC26X
|
||||
|
||||
// @section tmc_smart
|
||||
|
||||
/**
|
||||
* To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode
|
||||
* connect your SPI pins to the hardware SPI interface on your board and define
|
||||
|
|
@ -2776,6 +2793,7 @@
|
|||
*
|
||||
* TMCStepper library is required to use TMC stepper drivers.
|
||||
* https://github.com/teemuatlut/TMCStepper
|
||||
* @section tmc/config
|
||||
*/
|
||||
#if HAS_TRINAMIC_CONFIG
|
||||
|
||||
|
|
@ -2999,6 +3017,8 @@
|
|||
//#define E7_HOLD_MULTIPLIER 0.5
|
||||
#endif
|
||||
|
||||
// @section tmc/spi
|
||||
|
||||
/**
|
||||
* Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here.
|
||||
* The default pins can be found in your board's pins file.
|
||||
|
|
@ -3036,6 +3056,8 @@
|
|||
//#define TMC_SW_MISO -1
|
||||
//#define TMC_SW_SCK -1
|
||||
|
||||
// @section tmc/serial
|
||||
|
||||
/**
|
||||
* Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
|
||||
* Set the address using jumpers on pins MS1 and MS2.
|
||||
|
|
@ -3071,6 +3093,8 @@
|
|||
//#define E6_SLAVE_ADDRESS 0
|
||||
//#define E7_SLAVE_ADDRESS 0
|
||||
|
||||
// @section tmc/smart
|
||||
|
||||
/**
|
||||
* Software enable
|
||||
*
|
||||
|
|
@ -3079,6 +3103,8 @@
|
|||
*/
|
||||
//#define SOFTWARE_DRIVER_ENABLE
|
||||
|
||||
// @section tmc/stealthchop
|
||||
|
||||
/**
|
||||
* TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only
|
||||
* Use Trinamic's ultra quiet stepping mode.
|
||||
|
|
@ -3133,6 +3159,8 @@
|
|||
//#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
|
||||
//#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
|
||||
|
||||
// @section tmc/status
|
||||
|
||||
/**
|
||||
* Monitor Trinamic drivers
|
||||
* for error conditions like overtemperature and short to ground.
|
||||
|
|
@ -3152,6 +3180,8 @@
|
|||
#define STOP_ON_ERROR
|
||||
#endif
|
||||
|
||||
// @section tmc/hybrid
|
||||
|
||||
/**
|
||||
* TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only
|
||||
* The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD.
|
||||
|
|
@ -3208,6 +3238,7 @@
|
|||
* homing and adds a guard period for endstop triggering.
|
||||
*
|
||||
* Comment *_STALL_SENSITIVITY to disable sensorless homing for that axis.
|
||||
* @section tmc/stallguard
|
||||
*/
|
||||
//#define SENSORLESS_HOMING // StallGuard capable drivers only
|
||||
|
||||
|
|
@ -3231,6 +3262,8 @@
|
|||
//#define IMPROVE_HOMING_RELIABILITY
|
||||
#endif
|
||||
|
||||
// @section tmc/config
|
||||
|
||||
/**
|
||||
* TMC Homing stepper phase.
|
||||
*
|
||||
|
|
@ -3311,7 +3344,7 @@
|
|||
#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave
|
||||
#endif
|
||||
|
||||
// @section extras
|
||||
// @section photo
|
||||
|
||||
/**
|
||||
* Photo G-code
|
||||
|
|
@ -3354,6 +3387,8 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
// @section cnc
|
||||
|
||||
/**
|
||||
* Spindle & Laser control
|
||||
*
|
||||
|
|
@ -3558,6 +3593,8 @@
|
|||
#define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
|
||||
#endif
|
||||
|
||||
// @section filament width
|
||||
|
||||
/**
|
||||
* Filament Width Sensor
|
||||
*
|
||||
|
|
@ -3591,6 +3628,8 @@
|
|||
//#define FILAMENT_LCD_DISPLAY
|
||||
#endif
|
||||
|
||||
// @section power
|
||||
|
||||
/**
|
||||
* Power Monitor
|
||||
* Monitor voltage (V) and/or current (A), and -when possible- power (W)
|
||||
|
|
@ -3614,6 +3653,8 @@
|
|||
#define POWER_MONITOR_VOLTAGE_OFFSET 0 // Offset (in volts) applied to the calculated voltage
|
||||
#endif
|
||||
|
||||
// @section safety
|
||||
|
||||
/**
|
||||
* Stepper Driver Anti-SNAFU Protection
|
||||
*
|
||||
|
|
@ -3623,6 +3664,8 @@
|
|||
*/
|
||||
//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
|
||||
|
||||
// @section cnc
|
||||
|
||||
/**
|
||||
* CNC Coordinate Systems
|
||||
*
|
||||
|
|
@ -3639,6 +3682,8 @@
|
|||
*/
|
||||
//#define CNC_DRILLING_CYCLE
|
||||
|
||||
// @section reporting
|
||||
|
||||
/**
|
||||
* Auto-report fan speed with M123 S<seconds>
|
||||
* Requires fans with tachometer pins
|
||||
|
|
@ -3666,6 +3711,8 @@
|
|||
//#define M115_GEOMETRY_REPORT
|
||||
#endif
|
||||
|
||||
// @section security
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
|
|
@ -3673,6 +3720,8 @@
|
|||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
// @section volumetrics
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
|
|
@ -3701,14 +3750,7 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Enable this option for a leaner build of Marlin that removes all
|
||||
* workspace offsets, simplifying coordinate transformations, leveling, etc.
|
||||
*
|
||||
* - M206 and M428 are disabled.
|
||||
* - G92 will revert to its behavior from Marlin 1.0.
|
||||
*/
|
||||
//#define NO_WORKSPACE_OFFSETS
|
||||
// @section reporting
|
||||
|
||||
// Extra options for the M114 "Current Position" report
|
||||
//#define M114_DETAIL // Use 'M114` for details to check planner calculations
|
||||
|
|
@ -3717,6 +3759,8 @@
|
|||
|
||||
//#define REPORT_FAN_CHANGE // Report the new fan speed when changed by M106 (and others)
|
||||
|
||||
// @section gcode
|
||||
|
||||
/**
|
||||
* Spend 28 bytes of SRAM to optimize the G-code parser
|
||||
*/
|
||||
|
|
@ -3734,6 +3778,15 @@
|
|||
|
||||
//#define REPETIER_GCODE_M360 // Add commands originally from Repetier FW
|
||||
|
||||
/**
|
||||
* Enable this option for a leaner build of Marlin that removes all
|
||||
* workspace offsets, simplifying coordinate transformations, leveling, etc.
|
||||
*
|
||||
* - M206 and M428 are disabled.
|
||||
* - G92 will revert to its behavior from Marlin 1.0.
|
||||
*/
|
||||
//#define NO_WORKSPACE_OFFSETS
|
||||
|
||||
/**
|
||||
* CNC G-code options
|
||||
* Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.
|
||||
|
|
@ -3750,6 +3803,8 @@
|
|||
#endif
|
||||
//#define G0_ANGULAR_FEEDRATE 2700 // (°/min)
|
||||
|
||||
// @section gcode
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
|
|
@ -3774,6 +3829,8 @@
|
|||
* Up to 25 may be defined, but the actual number is LCD-dependent.
|
||||
*/
|
||||
|
||||
// @section custom main menu
|
||||
|
||||
// Custom Menu: Main Menu
|
||||
//#define CUSTOM_MENU_MAIN
|
||||
#if ENABLED(CUSTOM_MENU_MAIN)
|
||||
|
|
@ -3804,6 +3861,8 @@
|
|||
//#define MAIN_MENU_ITEM_5_CONFIRM
|
||||
#endif
|
||||
|
||||
// @section custom config menu
|
||||
|
||||
// Custom Menu: Configuration Menu
|
||||
//#define CUSTOM_MENU_CONFIG
|
||||
#if ENABLED(CUSTOM_MENU_CONFIG)
|
||||
|
|
@ -3834,6 +3893,8 @@
|
|||
//#define CONFIG_MENU_ITEM_5_CONFIRM
|
||||
#endif
|
||||
|
||||
// @section custom buttons
|
||||
|
||||
/**
|
||||
* User-defined buttons to run custom G-code.
|
||||
* Up to 25 may be defined.
|
||||
|
|
@ -3865,6 +3926,8 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
// @section host
|
||||
|
||||
/**
|
||||
* Host Action Commands
|
||||
*
|
||||
|
|
@ -3890,6 +3953,8 @@
|
|||
//#define HOST_SHUTDOWN_MENU_ITEM // Add a menu item that tells the host to shut down
|
||||
#endif
|
||||
|
||||
// @section extras
|
||||
|
||||
/**
|
||||
* Cancel Objects
|
||||
*
|
||||
|
|
@ -3911,6 +3976,7 @@
|
|||
* Alternative Supplier: https://reliabuild3d.com/
|
||||
*
|
||||
* Reliabuild encoders have been modified to improve reliability.
|
||||
* @section i2c encoders
|
||||
*/
|
||||
|
||||
//#define I2C_POSITION_ENCODERS
|
||||
|
|
@ -3982,6 +4048,7 @@
|
|||
|
||||
/**
|
||||
* Analog Joystick(s)
|
||||
* @section joystick
|
||||
*/
|
||||
//#define JOYSTICK
|
||||
#if ENABLED(JOYSTICK)
|
||||
|
|
@ -4006,6 +4073,7 @@
|
|||
* Modern replacement for the Prusa TMC_Z_CALIBRATION.
|
||||
* Adds capability to work with any adjustable current drivers.
|
||||
* Implemented as G34 because M915 is deprecated.
|
||||
* @section calibrate
|
||||
*/
|
||||
//#define MECHANICAL_GANTRY_CALIBRATION
|
||||
#if ENABLED(MECHANICAL_GANTRY_CALIBRATION)
|
||||
|
|
@ -4023,6 +4091,7 @@
|
|||
/**
|
||||
* Instant freeze / unfreeze functionality
|
||||
* Potentially useful for emergency stop that allows being resumed.
|
||||
* @section interface
|
||||
*/
|
||||
//#define FREEZE_FEATURE
|
||||
#if ENABLED(FREEZE_FEATURE)
|
||||
|
|
@ -4035,6 +4104,7 @@
|
|||
*
|
||||
* Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display.
|
||||
* Requires 3 signal wires. Some useful debug options are included to demonstrate its usage.
|
||||
* @section debug matrix
|
||||
*/
|
||||
//#define MAX7219_DEBUG
|
||||
#if ENABLED(MAX7219_DEBUG)
|
||||
|
|
@ -4073,6 +4143,7 @@
|
|||
* Support for Synchronized Z moves when used with NanoDLP. G0/G1 axis moves will
|
||||
* output a "Z_move_comp" string to enable synchronization with DLP projector exposure.
|
||||
* This feature allows you to use [[WaitForDoneMessage]] instead of M400 commands.
|
||||
* @section nanodlp
|
||||
*/
|
||||
//#define NANODLP_Z_SYNC
|
||||
#if ENABLED(NANODLP_Z_SYNC)
|
||||
|
|
@ -4081,6 +4152,7 @@
|
|||
|
||||
/**
|
||||
* Ethernet. Use M552 to enable and set the IP address.
|
||||
* @section network
|
||||
*/
|
||||
#if HAS_ETHERNET
|
||||
#define MAC_ADDRESS { 0xDE, 0xAD, 0xBE, 0xEF, 0xF0, 0x0D } // A MAC address unique to your network
|
||||
|
|
@ -4108,6 +4180,8 @@
|
|||
//#include "Configuration_Secure.h" // External file with WiFi SSID / Password
|
||||
#endif
|
||||
|
||||
// @section multi-material
|
||||
|
||||
/**
|
||||
* Průša Multi-Material Unit (MMU)
|
||||
* Enable in Configuration.h
|
||||
|
|
@ -4215,6 +4289,7 @@
|
|||
|
||||
/**
|
||||
* Advanced Print Counter settings
|
||||
* @section stats
|
||||
*/
|
||||
#if ENABLED(PRINTCOUNTER)
|
||||
#define SERVICE_WARNING_BUZZES 3
|
||||
|
|
|
|||
|
|
@ -114,6 +114,7 @@
|
|||
* :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
|
||||
*/
|
||||
#define BAUDRATE 250000
|
||||
|
||||
//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate
|
||||
|
||||
/**
|
||||
|
|
@ -122,7 +123,7 @@
|
|||
* :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
//#define SERIAL_PORT_2 -1
|
||||
//#define BAUDRATE_2 250000 // Enable to override BAUDRATE
|
||||
//#define BAUDRATE_2 250000 // :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] Enable to override BAUDRATE
|
||||
|
||||
/**
|
||||
* Select a third serial port on the board to use for communication with the host.
|
||||
|
|
@ -130,7 +131,7 @@
|
|||
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
//#define SERIAL_PORT_3 1
|
||||
//#define BAUDRATE_3 250000 // Enable to override BAUDRATE
|
||||
//#define BAUDRATE_3 250000 // :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] Enable to override BAUDRATE
|
||||
|
||||
// Enable the Bluetooth serial interface on AT90USB devices
|
||||
//#define BLUETOOTH
|
||||
|
|
@ -389,7 +390,7 @@
|
|||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
// @section psu control
|
||||
|
||||
/**
|
||||
* Power Supply Control
|
||||
|
|
@ -625,6 +626,8 @@
|
|||
//============================= PID Settings ================================
|
||||
//===========================================================================
|
||||
|
||||
// @section hotend temp
|
||||
|
||||
// Enable PIDTEMP for PID control or MPCTEMP for Predictive Model.
|
||||
// temperature control. Disable both for bang-bang heating.
|
||||
#define PIDTEMP // See the PID Tuning Guide at https://reprap.org/wiki/PID_Tuning
|
||||
|
|
@ -635,7 +638,8 @@
|
|||
#define PID_K1 0.95 // Smoothing factor within any PID loop
|
||||
|
||||
#if ENABLED(PIDTEMP)
|
||||
//#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders)
|
||||
//#define PID_DEBUG // Print PID debug data to the serial port. Use 'M303 D' to toggle activation.
|
||||
//#define PID_PARAMS_PER_HOTEND // Use separate PID parameters for each extruder (useful for mismatched extruders)
|
||||
// Set/get with G-code: M301 E[extruder number, 0-2]
|
||||
|
||||
#if ENABLED(PID_PARAMS_PER_HOTEND)
|
||||
|
|
@ -657,6 +661,7 @@
|
|||
* Use a physical model of the hotend to control temperature. When configured correctly
|
||||
* this gives better responsiveness and stability than PID and it also removes the need
|
||||
* for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model.
|
||||
* @section mpctemp
|
||||
*/
|
||||
#if ENABLED(MPCTEMP)
|
||||
//#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash)
|
||||
|
|
@ -724,7 +729,7 @@
|
|||
|
||||
#if ENABLED(PIDTEMPBED)
|
||||
//#define MIN_BED_POWER 0
|
||||
//#define PID_BED_DEBUG // Sends debug data to the serial port.
|
||||
//#define PID_BED_DEBUG // Print Bed PID debug data to the serial port.
|
||||
|
||||
#define DEFAULT_bedKp 369.610
|
||||
#define DEFAULT_bedKi 54.132
|
||||
|
|
@ -750,6 +755,7 @@
|
|||
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 200W
|
||||
* heater. If your configuration is significantly different than this and you don't understand
|
||||
* the issues involved, don't use chamber PID until someone else verifies that your hardware works.
|
||||
* @section chamber temp
|
||||
*/
|
||||
//#define PIDTEMPCHAMBER
|
||||
//#define CHAMBER_LIMIT_SWITCHING
|
||||
|
|
@ -764,7 +770,7 @@
|
|||
|
||||
#if ENABLED(PIDTEMPCHAMBER)
|
||||
#define MIN_CHAMBER_POWER 0
|
||||
//#define PID_CHAMBER_DEBUG // Sends debug data to the serial port.
|
||||
//#define PID_CHAMBER_DEBUG // Print Chamber PID debug data to the serial port.
|
||||
|
||||
// Lasko "MyHeat Personal Heater" (200w) modified with a Fotek SSR-10DA to control only the heating element
|
||||
// and placed inside the small Creality printer enclosure tent.
|
||||
|
|
@ -778,7 +784,6 @@
|
|||
#endif // PIDTEMPCHAMBER
|
||||
|
||||
#if ANY(PIDTEMP, PIDTEMPBED, PIDTEMPCHAMBER)
|
||||
//#define PID_DEBUG // Sends debug data to the serial port. Use 'M303 D' to toggle activation.
|
||||
//#define PID_OPENLOOP // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX
|
||||
//#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay
|
||||
#define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature
|
||||
|
|
@ -788,7 +793,7 @@
|
|||
//#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of flash)
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
// @section safety
|
||||
|
||||
/**
|
||||
* Prevent extrusion if the temperature is below EXTRUDE_MINTEMP.
|
||||
|
|
@ -856,6 +861,8 @@
|
|||
#define POLAR_SEGMENTS_PER_SECOND 5
|
||||
#endif
|
||||
|
||||
// @section delta
|
||||
|
||||
// Enable for DELTA kinematics and configure below
|
||||
//#define DELTA
|
||||
#if ENABLED(DELTA)
|
||||
|
|
@ -915,6 +922,8 @@
|
|||
//#define DELTA_DIAGONAL_ROD_TRIM_TOWER { 0.0, 0.0, 0.0 }
|
||||
#endif
|
||||
|
||||
// @section scara
|
||||
|
||||
/**
|
||||
* MORGAN_SCARA was developed by QHARLEY in South Africa in 2012-2013.
|
||||
* Implemented and slightly reworked by JCERNY in June, 2014.
|
||||
|
|
@ -958,6 +967,8 @@
|
|||
|
||||
#endif
|
||||
|
||||
// @section tpara
|
||||
|
||||
// Enable for TPARA kinematics and configure below
|
||||
//#define AXEL_TPARA
|
||||
#if ENABLED(AXEL_TPARA)
|
||||
|
|
@ -984,6 +995,8 @@
|
|||
#define PSI_HOMING_OFFSET 0
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
|
|
@ -995,7 +1008,7 @@
|
|||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
||||
// @section homing
|
||||
// @section endstops
|
||||
|
||||
// Specify here all the endstop connectors that are connected to any endstop or probe.
|
||||
// Almost all printers will be using one per axis. Probes will use one or more of the
|
||||
|
|
@ -1665,7 +1678,7 @@
|
|||
//#define V_HOME_DIR -1
|
||||
//#define W_HOME_DIR -1
|
||||
|
||||
// @section machine
|
||||
// @section geometry
|
||||
|
||||
// The size of the printable area
|
||||
#define X_BED_SIZE 320
|
||||
|
|
@ -2126,7 +2139,7 @@
|
|||
//============================= Additional Features ===========================
|
||||
//=============================================================================
|
||||
|
||||
// @section extras
|
||||
// @section eeprom
|
||||
|
||||
/**
|
||||
* EEPROM
|
||||
|
|
@ -2146,6 +2159,8 @@
|
|||
//#define EEPROM_INIT_NOW // Init EEPROM on first boot after a new build.
|
||||
#endif
|
||||
|
||||
// @section host
|
||||
|
||||
//
|
||||
// Host Keepalive
|
||||
//
|
||||
|
|
@ -2156,6 +2171,8 @@
|
|||
#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113.
|
||||
#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating
|
||||
|
||||
// @section units
|
||||
|
||||
//
|
||||
// G20/G21 Inch mode support
|
||||
//
|
||||
|
|
@ -2183,6 +2200,8 @@
|
|||
#define PREHEAT_2_TEMP_CHAMBER 35
|
||||
#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
|
||||
|
||||
// @section motion
|
||||
|
||||
/**
|
||||
* Nozzle Park
|
||||
*
|
||||
|
|
@ -2281,6 +2300,8 @@
|
|||
|
||||
#endif
|
||||
|
||||
// @section host
|
||||
|
||||
/**
|
||||
* Print Job Timer
|
||||
*
|
||||
|
|
@ -2307,6 +2328,8 @@
|
|||
*/
|
||||
#define PRINTJOB_TIMER_AUTOSTART
|
||||
|
||||
// @section stats
|
||||
|
||||
/**
|
||||
* Print Counter
|
||||
*
|
||||
|
|
@ -2324,6 +2347,8 @@
|
|||
#define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print
|
||||
#endif
|
||||
|
||||
// @section security
|
||||
|
||||
/**
|
||||
* Password
|
||||
*
|
||||
|
|
@ -2359,7 +2384,7 @@
|
|||
//============================= LCD and SD support ============================
|
||||
//=============================================================================
|
||||
|
||||
// @section lcd
|
||||
// @section interface
|
||||
|
||||
/**
|
||||
* LCD LANGUAGE
|
||||
|
|
@ -2516,6 +2541,7 @@
|
|||
//======================== LCD / Controller Selection =========================
|
||||
//======================== (Character-based LCDs) =========================
|
||||
//=============================================================================
|
||||
// @section lcd
|
||||
|
||||
//
|
||||
// RepRapDiscount Smart Controller.
|
||||
|
|
@ -3164,7 +3190,7 @@
|
|||
//=============================== Extra Features ==============================
|
||||
//=============================================================================
|
||||
|
||||
// @section extras
|
||||
// @section fans
|
||||
|
||||
// Set number of user-controlled fans. Disable to use all board-defined fans.
|
||||
// :[1,2,3,4,5,6,7,8]
|
||||
|
|
@ -3188,14 +3214,18 @@
|
|||
// duty cycle is attained.
|
||||
//#define SOFT_PWM_DITHER
|
||||
|
||||
// @section extras
|
||||
|
||||
// Support for the BariCUDA Paste Extruder
|
||||
//#define BARICUDA
|
||||
|
||||
// @section lights
|
||||
|
||||
// Temperature status LEDs that display the hotend and bed temperature.
|
||||
// If all hotends, bed temperature, and target temperature are under 54C
|
||||
// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis)
|
||||
//#define TEMP_STAT_LEDS
|
||||
|
||||
// Support for the BariCUDA Paste Extruder
|
||||
//#define BARICUDA
|
||||
|
||||
// Support for BlinkM/CyzRgb
|
||||
//#define BLINKM
|
||||
|
||||
|
|
@ -3281,6 +3311,8 @@
|
|||
#define PRINTER_EVENT_LEDS
|
||||
#endif
|
||||
|
||||
// @section servos
|
||||
|
||||
/**
|
||||
* Number of servos
|
||||
*
|
||||
|
|
|
|||
|
|
@ -32,6 +32,24 @@
|
|||
*/
|
||||
#define CONFIGURATION_ADV_H_VERSION 02010100
|
||||
|
||||
// @section develop
|
||||
|
||||
/**
|
||||
* Configuration Dump to JSON and INI format
|
||||
*
|
||||
* Dump the configuration as part of the build. (See signature.py)
|
||||
* Output files are saved with the build (e.g., .pio/build/mega2560).
|
||||
*
|
||||
* See `build_all_examples --ini` as an example of config.ini archiving.
|
||||
*
|
||||
* 1 = marlin_config.json - Dictionary containing the configuration.
|
||||
* This file is also generated for CONFIGURATION_EMBEDDING.
|
||||
* 2 = config.ini - File format for PlatformIO preprocessing.
|
||||
* 3 = schema.json - The entire configuration schema. (13 = pattern groups)
|
||||
* 4 = schema.yml - The entire configuration schema.
|
||||
*/
|
||||
//#define CONFIG_DUMP // :[1:'JSON', 2:'config.ini', 3:'schema.json', 4:'schema.yml']
|
||||
|
||||
//===========================================================================
|
||||
//============================= Thermal Settings ============================
|
||||
//===========================================================================
|
||||
|
|
@ -2558,6 +2576,8 @@
|
|||
#endif
|
||||
#endif // HAS_MULTI_EXTRUDER
|
||||
|
||||
// @section advanced pause
|
||||
|
||||
/**
|
||||
* Advanced Pause for Filament Change
|
||||
* - Adds the G-code M600 Filament Change to initiate a filament change.
|
||||
|
|
@ -2615,13 +2635,12 @@
|
|||
#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
|
||||
#endif
|
||||
|
||||
// @section tmc
|
||||
|
||||
/**
|
||||
* TMC26X Stepper Driver options
|
||||
*
|
||||
* The TMC26XStepper library is required for this stepper driver.
|
||||
* https://github.com/trinamic/TMC26XStepper
|
||||
* @section tmc/tmc26x
|
||||
*/
|
||||
#if HAS_DRIVER(TMC26X)
|
||||
|
||||
|
|
@ -2759,8 +2778,6 @@
|
|||
|
||||
#endif // TMC26X
|
||||
|
||||
// @section tmc_smart
|
||||
|
||||
/**
|
||||
* To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode
|
||||
* connect your SPI pins to the hardware SPI interface on your board and define
|
||||
|
|
@ -2776,6 +2793,7 @@
|
|||
*
|
||||
* TMCStepper library is required to use TMC stepper drivers.
|
||||
* https://github.com/teemuatlut/TMCStepper
|
||||
* @section tmc/config
|
||||
*/
|
||||
#if HAS_TRINAMIC_CONFIG
|
||||
|
||||
|
|
@ -2999,6 +3017,8 @@
|
|||
//#define E7_HOLD_MULTIPLIER 0.5
|
||||
#endif
|
||||
|
||||
// @section tmc/spi
|
||||
|
||||
/**
|
||||
* Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here.
|
||||
* The default pins can be found in your board's pins file.
|
||||
|
|
@ -3036,6 +3056,8 @@
|
|||
//#define TMC_SW_MISO -1
|
||||
//#define TMC_SW_SCK -1
|
||||
|
||||
// @section tmc/serial
|
||||
|
||||
/**
|
||||
* Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
|
||||
* Set the address using jumpers on pins MS1 and MS2.
|
||||
|
|
@ -3071,6 +3093,8 @@
|
|||
//#define E6_SLAVE_ADDRESS 0
|
||||
//#define E7_SLAVE_ADDRESS 0
|
||||
|
||||
// @section tmc/smart
|
||||
|
||||
/**
|
||||
* Software enable
|
||||
*
|
||||
|
|
@ -3079,6 +3103,8 @@
|
|||
*/
|
||||
//#define SOFTWARE_DRIVER_ENABLE
|
||||
|
||||
// @section tmc/stealthchop
|
||||
|
||||
/**
|
||||
* TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only
|
||||
* Use Trinamic's ultra quiet stepping mode.
|
||||
|
|
@ -3133,6 +3159,8 @@
|
|||
//#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
|
||||
//#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
|
||||
|
||||
// @section tmc/status
|
||||
|
||||
/**
|
||||
* Monitor Trinamic drivers
|
||||
* for error conditions like overtemperature and short to ground.
|
||||
|
|
@ -3152,6 +3180,8 @@
|
|||
#define STOP_ON_ERROR
|
||||
#endif
|
||||
|
||||
// @section tmc/hybrid
|
||||
|
||||
/**
|
||||
* TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only
|
||||
* The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD.
|
||||
|
|
@ -3208,6 +3238,7 @@
|
|||
* homing and adds a guard period for endstop triggering.
|
||||
*
|
||||
* Comment *_STALL_SENSITIVITY to disable sensorless homing for that axis.
|
||||
* @section tmc/stallguard
|
||||
*/
|
||||
//#define SENSORLESS_HOMING // StallGuard capable drivers only
|
||||
|
||||
|
|
@ -3231,6 +3262,8 @@
|
|||
//#define IMPROVE_HOMING_RELIABILITY
|
||||
#endif
|
||||
|
||||
// @section tmc/config
|
||||
|
||||
/**
|
||||
* TMC Homing stepper phase.
|
||||
*
|
||||
|
|
@ -3311,7 +3344,7 @@
|
|||
#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave
|
||||
#endif
|
||||
|
||||
// @section extras
|
||||
// @section photo
|
||||
|
||||
/**
|
||||
* Photo G-code
|
||||
|
|
@ -3354,6 +3387,8 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
// @section cnc
|
||||
|
||||
/**
|
||||
* Spindle & Laser control
|
||||
*
|
||||
|
|
@ -3558,6 +3593,8 @@
|
|||
#define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
|
||||
#endif
|
||||
|
||||
// @section filament width
|
||||
|
||||
/**
|
||||
* Filament Width Sensor
|
||||
*
|
||||
|
|
@ -3591,6 +3628,8 @@
|
|||
//#define FILAMENT_LCD_DISPLAY
|
||||
#endif
|
||||
|
||||
// @section power
|
||||
|
||||
/**
|
||||
* Power Monitor
|
||||
* Monitor voltage (V) and/or current (A), and -when possible- power (W)
|
||||
|
|
@ -3614,6 +3653,8 @@
|
|||
#define POWER_MONITOR_VOLTAGE_OFFSET 0 // Offset (in volts) applied to the calculated voltage
|
||||
#endif
|
||||
|
||||
// @section safety
|
||||
|
||||
/**
|
||||
* Stepper Driver Anti-SNAFU Protection
|
||||
*
|
||||
|
|
@ -3623,6 +3664,8 @@
|
|||
*/
|
||||
//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
|
||||
|
||||
// @section cnc
|
||||
|
||||
/**
|
||||
* CNC Coordinate Systems
|
||||
*
|
||||
|
|
@ -3639,6 +3682,8 @@
|
|||
*/
|
||||
//#define CNC_DRILLING_CYCLE
|
||||
|
||||
// @section reporting
|
||||
|
||||
/**
|
||||
* Auto-report fan speed with M123 S<seconds>
|
||||
* Requires fans with tachometer pins
|
||||
|
|
@ -3666,6 +3711,8 @@
|
|||
//#define M115_GEOMETRY_REPORT
|
||||
#endif
|
||||
|
||||
// @section security
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
|
|
@ -3673,6 +3720,8 @@
|
|||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
// @section volumetrics
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
|
|
@ -3701,14 +3750,7 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Enable this option for a leaner build of Marlin that removes all
|
||||
* workspace offsets, simplifying coordinate transformations, leveling, etc.
|
||||
*
|
||||
* - M206 and M428 are disabled.
|
||||
* - G92 will revert to its behavior from Marlin 1.0.
|
||||
*/
|
||||
//#define NO_WORKSPACE_OFFSETS
|
||||
// @section reporting
|
||||
|
||||
// Extra options for the M114 "Current Position" report
|
||||
//#define M114_DETAIL // Use 'M114` for details to check planner calculations
|
||||
|
|
@ -3717,6 +3759,8 @@
|
|||
|
||||
//#define REPORT_FAN_CHANGE // Report the new fan speed when changed by M106 (and others)
|
||||
|
||||
// @section gcode
|
||||
|
||||
/**
|
||||
* Spend 28 bytes of SRAM to optimize the G-code parser
|
||||
*/
|
||||
|
|
@ -3734,6 +3778,15 @@
|
|||
|
||||
//#define REPETIER_GCODE_M360 // Add commands originally from Repetier FW
|
||||
|
||||
/**
|
||||
* Enable this option for a leaner build of Marlin that removes all
|
||||
* workspace offsets, simplifying coordinate transformations, leveling, etc.
|
||||
*
|
||||
* - M206 and M428 are disabled.
|
||||
* - G92 will revert to its behavior from Marlin 1.0.
|
||||
*/
|
||||
//#define NO_WORKSPACE_OFFSETS
|
||||
|
||||
/**
|
||||
* CNC G-code options
|
||||
* Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.
|
||||
|
|
@ -3750,6 +3803,8 @@
|
|||
#endif
|
||||
//#define G0_ANGULAR_FEEDRATE 2700 // (°/min)
|
||||
|
||||
// @section gcode
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
|
|
@ -3774,6 +3829,8 @@
|
|||
* Up to 25 may be defined, but the actual number is LCD-dependent.
|
||||
*/
|
||||
|
||||
// @section custom main menu
|
||||
|
||||
// Custom Menu: Main Menu
|
||||
//#define CUSTOM_MENU_MAIN
|
||||
#if ENABLED(CUSTOM_MENU_MAIN)
|
||||
|
|
@ -3804,6 +3861,8 @@
|
|||
//#define MAIN_MENU_ITEM_5_CONFIRM
|
||||
#endif
|
||||
|
||||
// @section custom config menu
|
||||
|
||||
// Custom Menu: Configuration Menu
|
||||
//#define CUSTOM_MENU_CONFIG
|
||||
#if ENABLED(CUSTOM_MENU_CONFIG)
|
||||
|
|
@ -3834,6 +3893,8 @@
|
|||
//#define CONFIG_MENU_ITEM_5_CONFIRM
|
||||
#endif
|
||||
|
||||
// @section custom buttons
|
||||
|
||||
/**
|
||||
* User-defined buttons to run custom G-code.
|
||||
* Up to 25 may be defined.
|
||||
|
|
@ -3865,6 +3926,8 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
// @section host
|
||||
|
||||
/**
|
||||
* Host Action Commands
|
||||
*
|
||||
|
|
@ -3890,6 +3953,8 @@
|
|||
//#define HOST_SHUTDOWN_MENU_ITEM // Add a menu item that tells the host to shut down
|
||||
#endif
|
||||
|
||||
// @section extras
|
||||
|
||||
/**
|
||||
* Cancel Objects
|
||||
*
|
||||
|
|
@ -3911,6 +3976,7 @@
|
|||
* Alternative Supplier: https://reliabuild3d.com/
|
||||
*
|
||||
* Reliabuild encoders have been modified to improve reliability.
|
||||
* @section i2c encoders
|
||||
*/
|
||||
|
||||
//#define I2C_POSITION_ENCODERS
|
||||
|
|
@ -3982,6 +4048,7 @@
|
|||
|
||||
/**
|
||||
* Analog Joystick(s)
|
||||
* @section joystick
|
||||
*/
|
||||
//#define JOYSTICK
|
||||
#if ENABLED(JOYSTICK)
|
||||
|
|
@ -4006,6 +4073,7 @@
|
|||
* Modern replacement for the Prusa TMC_Z_CALIBRATION.
|
||||
* Adds capability to work with any adjustable current drivers.
|
||||
* Implemented as G34 because M915 is deprecated.
|
||||
* @section calibrate
|
||||
*/
|
||||
//#define MECHANICAL_GANTRY_CALIBRATION
|
||||
#if ENABLED(MECHANICAL_GANTRY_CALIBRATION)
|
||||
|
|
@ -4023,6 +4091,7 @@
|
|||
/**
|
||||
* Instant freeze / unfreeze functionality
|
||||
* Potentially useful for emergency stop that allows being resumed.
|
||||
* @section interface
|
||||
*/
|
||||
//#define FREEZE_FEATURE
|
||||
#if ENABLED(FREEZE_FEATURE)
|
||||
|
|
@ -4035,6 +4104,7 @@
|
|||
*
|
||||
* Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display.
|
||||
* Requires 3 signal wires. Some useful debug options are included to demonstrate its usage.
|
||||
* @section debug matrix
|
||||
*/
|
||||
//#define MAX7219_DEBUG
|
||||
#if ENABLED(MAX7219_DEBUG)
|
||||
|
|
@ -4073,6 +4143,7 @@
|
|||
* Support for Synchronized Z moves when used with NanoDLP. G0/G1 axis moves will
|
||||
* output a "Z_move_comp" string to enable synchronization with DLP projector exposure.
|
||||
* This feature allows you to use [[WaitForDoneMessage]] instead of M400 commands.
|
||||
* @section nanodlp
|
||||
*/
|
||||
//#define NANODLP_Z_SYNC
|
||||
#if ENABLED(NANODLP_Z_SYNC)
|
||||
|
|
@ -4081,6 +4152,7 @@
|
|||
|
||||
/**
|
||||
* Ethernet. Use M552 to enable and set the IP address.
|
||||
* @section network
|
||||
*/
|
||||
#if HAS_ETHERNET
|
||||
#define MAC_ADDRESS { 0xDE, 0xAD, 0xBE, 0xEF, 0xF0, 0x0D } // A MAC address unique to your network
|
||||
|
|
@ -4108,6 +4180,8 @@
|
|||
//#include "Configuration_Secure.h" // External file with WiFi SSID / Password
|
||||
#endif
|
||||
|
||||
// @section multi-material
|
||||
|
||||
/**
|
||||
* Průša Multi-Material Unit (MMU)
|
||||
* Enable in Configuration.h
|
||||
|
|
@ -4215,6 +4289,7 @@
|
|||
|
||||
/**
|
||||
* Advanced Print Counter settings
|
||||
* @section stats
|
||||
*/
|
||||
#if ENABLED(PRINTCOUNTER)
|
||||
#define SERVICE_WARNING_BUZZES 3
|
||||
|
|
|
|||
|
|
@ -114,6 +114,7 @@
|
|||
* :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
|
||||
*/
|
||||
#define BAUDRATE 250000
|
||||
|
||||
//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate
|
||||
|
||||
/**
|
||||
|
|
@ -122,7 +123,7 @@
|
|||
* :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
//#define SERIAL_PORT_2 -1
|
||||
//#define BAUDRATE_2 250000 // Enable to override BAUDRATE
|
||||
//#define BAUDRATE_2 250000 // :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] Enable to override BAUDRATE
|
||||
|
||||
/**
|
||||
* Select a third serial port on the board to use for communication with the host.
|
||||
|
|
@ -130,7 +131,7 @@
|
|||
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
//#define SERIAL_PORT_3 1
|
||||
//#define BAUDRATE_3 250000 // Enable to override BAUDRATE
|
||||
//#define BAUDRATE_3 250000 // :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] Enable to override BAUDRATE
|
||||
|
||||
// Enable the Bluetooth serial interface on AT90USB devices
|
||||
//#define BLUETOOTH
|
||||
|
|
@ -389,7 +390,7 @@
|
|||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
// @section psu control
|
||||
|
||||
/**
|
||||
* Power Supply Control
|
||||
|
|
@ -625,6 +626,8 @@
|
|||
//============================= PID Settings ================================
|
||||
//===========================================================================
|
||||
|
||||
// @section hotend temp
|
||||
|
||||
// Enable PIDTEMP for PID control or MPCTEMP for Predictive Model.
|
||||
// temperature control. Disable both for bang-bang heating.
|
||||
#define PIDTEMP // See the PID Tuning Guide at https://reprap.org/wiki/PID_Tuning
|
||||
|
|
@ -635,7 +638,8 @@
|
|||
#define PID_K1 0.95 // Smoothing factor within any PID loop
|
||||
|
||||
#if ENABLED(PIDTEMP)
|
||||
//#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders)
|
||||
//#define PID_DEBUG // Print PID debug data to the serial port. Use 'M303 D' to toggle activation.
|
||||
//#define PID_PARAMS_PER_HOTEND // Use separate PID parameters for each extruder (useful for mismatched extruders)
|
||||
// Set/get with G-code: M301 E[extruder number, 0-2]
|
||||
|
||||
#if ENABLED(PID_PARAMS_PER_HOTEND)
|
||||
|
|
@ -657,6 +661,7 @@
|
|||
* Use a physical model of the hotend to control temperature. When configured correctly
|
||||
* this gives better responsiveness and stability than PID and it also removes the need
|
||||
* for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model.
|
||||
* @section mpctemp
|
||||
*/
|
||||
#if ENABLED(MPCTEMP)
|
||||
//#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash)
|
||||
|
|
@ -724,7 +729,7 @@
|
|||
|
||||
#if ENABLED(PIDTEMPBED)
|
||||
//#define MIN_BED_POWER 0
|
||||
//#define PID_BED_DEBUG // Sends debug data to the serial port.
|
||||
//#define PID_BED_DEBUG // Print Bed PID debug data to the serial port.
|
||||
|
||||
#define DEFAULT_bedKp 369.610
|
||||
#define DEFAULT_bedKi 54.132
|
||||
|
|
@ -750,6 +755,7 @@
|
|||
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 200W
|
||||
* heater. If your configuration is significantly different than this and you don't understand
|
||||
* the issues involved, don't use chamber PID until someone else verifies that your hardware works.
|
||||
* @section chamber temp
|
||||
*/
|
||||
//#define PIDTEMPCHAMBER
|
||||
//#define CHAMBER_LIMIT_SWITCHING
|
||||
|
|
@ -764,7 +770,7 @@
|
|||
|
||||
#if ENABLED(PIDTEMPCHAMBER)
|
||||
#define MIN_CHAMBER_POWER 0
|
||||
//#define PID_CHAMBER_DEBUG // Sends debug data to the serial port.
|
||||
//#define PID_CHAMBER_DEBUG // Print Chamber PID debug data to the serial port.
|
||||
|
||||
// Lasko "MyHeat Personal Heater" (200w) modified with a Fotek SSR-10DA to control only the heating element
|
||||
// and placed inside the small Creality printer enclosure tent.
|
||||
|
|
@ -778,7 +784,6 @@
|
|||
#endif // PIDTEMPCHAMBER
|
||||
|
||||
#if ANY(PIDTEMP, PIDTEMPBED, PIDTEMPCHAMBER)
|
||||
//#define PID_DEBUG // Sends debug data to the serial port. Use 'M303 D' to toggle activation.
|
||||
//#define PID_OPENLOOP // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX
|
||||
//#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay
|
||||
#define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature
|
||||
|
|
@ -788,7 +793,7 @@
|
|||
//#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of flash)
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
// @section safety
|
||||
|
||||
/**
|
||||
* Prevent extrusion if the temperature is below EXTRUDE_MINTEMP.
|
||||
|
|
@ -856,6 +861,8 @@
|
|||
#define POLAR_SEGMENTS_PER_SECOND 5
|
||||
#endif
|
||||
|
||||
// @section delta
|
||||
|
||||
// Enable for DELTA kinematics and configure below
|
||||
//#define DELTA
|
||||
#if ENABLED(DELTA)
|
||||
|
|
@ -915,6 +922,8 @@
|
|||
//#define DELTA_DIAGONAL_ROD_TRIM_TOWER { 0.0, 0.0, 0.0 }
|
||||
#endif
|
||||
|
||||
// @section scara
|
||||
|
||||
/**
|
||||
* MORGAN_SCARA was developed by QHARLEY in South Africa in 2012-2013.
|
||||
* Implemented and slightly reworked by JCERNY in June, 2014.
|
||||
|
|
@ -958,6 +967,8 @@
|
|||
|
||||
#endif
|
||||
|
||||
// @section tpara
|
||||
|
||||
// Enable for TPARA kinematics and configure below
|
||||
//#define AXEL_TPARA
|
||||
#if ENABLED(AXEL_TPARA)
|
||||
|
|
@ -984,6 +995,8 @@
|
|||
#define PSI_HOMING_OFFSET 0
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
|
|
@ -995,7 +1008,7 @@
|
|||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
||||
// @section homing
|
||||
// @section endstops
|
||||
|
||||
// Specify here all the endstop connectors that are connected to any endstop or probe.
|
||||
// Almost all printers will be using one per axis. Probes will use one or more of the
|
||||
|
|
@ -1665,7 +1678,7 @@
|
|||
//#define V_HOME_DIR -1
|
||||
//#define W_HOME_DIR -1
|
||||
|
||||
// @section machine
|
||||
// @section geometry
|
||||
|
||||
// The size of the printable area
|
||||
#define X_BED_SIZE 320
|
||||
|
|
@ -2126,7 +2139,7 @@
|
|||
//============================= Additional Features ===========================
|
||||
//=============================================================================
|
||||
|
||||
// @section extras
|
||||
// @section eeprom
|
||||
|
||||
/**
|
||||
* EEPROM
|
||||
|
|
@ -2146,6 +2159,8 @@
|
|||
//#define EEPROM_INIT_NOW // Init EEPROM on first boot after a new build.
|
||||
#endif
|
||||
|
||||
// @section host
|
||||
|
||||
//
|
||||
// Host Keepalive
|
||||
//
|
||||
|
|
@ -2156,6 +2171,8 @@
|
|||
#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113.
|
||||
#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating
|
||||
|
||||
// @section units
|
||||
|
||||
//
|
||||
// G20/G21 Inch mode support
|
||||
//
|
||||
|
|
@ -2183,6 +2200,8 @@
|
|||
#define PREHEAT_2_TEMP_CHAMBER 35
|
||||
#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
|
||||
|
||||
// @section motion
|
||||
|
||||
/**
|
||||
* Nozzle Park
|
||||
*
|
||||
|
|
@ -2281,6 +2300,8 @@
|
|||
|
||||
#endif
|
||||
|
||||
// @section host
|
||||
|
||||
/**
|
||||
* Print Job Timer
|
||||
*
|
||||
|
|
@ -2307,6 +2328,8 @@
|
|||
*/
|
||||
#define PRINTJOB_TIMER_AUTOSTART
|
||||
|
||||
// @section stats
|
||||
|
||||
/**
|
||||
* Print Counter
|
||||
*
|
||||
|
|
@ -2324,6 +2347,8 @@
|
|||
#define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print
|
||||
#endif
|
||||
|
||||
// @section security
|
||||
|
||||
/**
|
||||
* Password
|
||||
*
|
||||
|
|
@ -2359,7 +2384,7 @@
|
|||
//============================= LCD and SD support ============================
|
||||
//=============================================================================
|
||||
|
||||
// @section lcd
|
||||
// @section interface
|
||||
|
||||
/**
|
||||
* LCD LANGUAGE
|
||||
|
|
@ -2516,6 +2541,7 @@
|
|||
//======================== LCD / Controller Selection =========================
|
||||
//======================== (Character-based LCDs) =========================
|
||||
//=============================================================================
|
||||
// @section lcd
|
||||
|
||||
//
|
||||
// RepRapDiscount Smart Controller.
|
||||
|
|
@ -3164,7 +3190,7 @@
|
|||
//=============================== Extra Features ==============================
|
||||
//=============================================================================
|
||||
|
||||
// @section extras
|
||||
// @section fans
|
||||
|
||||
// Set number of user-controlled fans. Disable to use all board-defined fans.
|
||||
// :[1,2,3,4,5,6,7,8]
|
||||
|
|
@ -3188,14 +3214,18 @@
|
|||
// duty cycle is attained.
|
||||
//#define SOFT_PWM_DITHER
|
||||
|
||||
// @section extras
|
||||
|
||||
// Support for the BariCUDA Paste Extruder
|
||||
//#define BARICUDA
|
||||
|
||||
// @section lights
|
||||
|
||||
// Temperature status LEDs that display the hotend and bed temperature.
|
||||
// If all hotends, bed temperature, and target temperature are under 54C
|
||||
// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis)
|
||||
//#define TEMP_STAT_LEDS
|
||||
|
||||
// Support for the BariCUDA Paste Extruder
|
||||
//#define BARICUDA
|
||||
|
||||
// Support for BlinkM/CyzRgb
|
||||
//#define BLINKM
|
||||
|
||||
|
|
@ -3281,6 +3311,8 @@
|
|||
#define PRINTER_EVENT_LEDS
|
||||
#endif
|
||||
|
||||
// @section servos
|
||||
|
||||
/**
|
||||
* Number of servos
|
||||
*
|
||||
|
|
|
|||
|
|
@ -32,6 +32,24 @@
|
|||
*/
|
||||
#define CONFIGURATION_ADV_H_VERSION 02010100
|
||||
|
||||
// @section develop
|
||||
|
||||
/**
|
||||
* Configuration Dump to JSON and INI format
|
||||
*
|
||||
* Dump the configuration as part of the build. (See signature.py)
|
||||
* Output files are saved with the build (e.g., .pio/build/mega2560).
|
||||
*
|
||||
* See `build_all_examples --ini` as an example of config.ini archiving.
|
||||
*
|
||||
* 1 = marlin_config.json - Dictionary containing the configuration.
|
||||
* This file is also generated for CONFIGURATION_EMBEDDING.
|
||||
* 2 = config.ini - File format for PlatformIO preprocessing.
|
||||
* 3 = schema.json - The entire configuration schema. (13 = pattern groups)
|
||||
* 4 = schema.yml - The entire configuration schema.
|
||||
*/
|
||||
//#define CONFIG_DUMP // :[1:'JSON', 2:'config.ini', 3:'schema.json', 4:'schema.yml']
|
||||
|
||||
//===========================================================================
|
||||
//============================= Thermal Settings ============================
|
||||
//===========================================================================
|
||||
|
|
@ -2558,6 +2576,8 @@
|
|||
#endif
|
||||
#endif // HAS_MULTI_EXTRUDER
|
||||
|
||||
// @section advanced pause
|
||||
|
||||
/**
|
||||
* Advanced Pause for Filament Change
|
||||
* - Adds the G-code M600 Filament Change to initiate a filament change.
|
||||
|
|
@ -2615,13 +2635,12 @@
|
|||
#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
|
||||
#endif
|
||||
|
||||
// @section tmc
|
||||
|
||||
/**
|
||||
* TMC26X Stepper Driver options
|
||||
*
|
||||
* The TMC26XStepper library is required for this stepper driver.
|
||||
* https://github.com/trinamic/TMC26XStepper
|
||||
* @section tmc/tmc26x
|
||||
*/
|
||||
#if HAS_DRIVER(TMC26X)
|
||||
|
||||
|
|
@ -2759,8 +2778,6 @@
|
|||
|
||||
#endif // TMC26X
|
||||
|
||||
// @section tmc_smart
|
||||
|
||||
/**
|
||||
* To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode
|
||||
* connect your SPI pins to the hardware SPI interface on your board and define
|
||||
|
|
@ -2776,6 +2793,7 @@
|
|||
*
|
||||
* TMCStepper library is required to use TMC stepper drivers.
|
||||
* https://github.com/teemuatlut/TMCStepper
|
||||
* @section tmc/config
|
||||
*/
|
||||
#if HAS_TRINAMIC_CONFIG
|
||||
|
||||
|
|
@ -2999,6 +3017,8 @@
|
|||
//#define E7_HOLD_MULTIPLIER 0.5
|
||||
#endif
|
||||
|
||||
// @section tmc/spi
|
||||
|
||||
/**
|
||||
* Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here.
|
||||
* The default pins can be found in your board's pins file.
|
||||
|
|
@ -3036,6 +3056,8 @@
|
|||
//#define TMC_SW_MISO -1
|
||||
//#define TMC_SW_SCK -1
|
||||
|
||||
// @section tmc/serial
|
||||
|
||||
/**
|
||||
* Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
|
||||
* Set the address using jumpers on pins MS1 and MS2.
|
||||
|
|
@ -3071,6 +3093,8 @@
|
|||
//#define E6_SLAVE_ADDRESS 0
|
||||
//#define E7_SLAVE_ADDRESS 0
|
||||
|
||||
// @section tmc/smart
|
||||
|
||||
/**
|
||||
* Software enable
|
||||
*
|
||||
|
|
@ -3079,6 +3103,8 @@
|
|||
*/
|
||||
//#define SOFTWARE_DRIVER_ENABLE
|
||||
|
||||
// @section tmc/stealthchop
|
||||
|
||||
/**
|
||||
* TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only
|
||||
* Use Trinamic's ultra quiet stepping mode.
|
||||
|
|
@ -3133,6 +3159,8 @@
|
|||
//#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
|
||||
//#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
|
||||
|
||||
// @section tmc/status
|
||||
|
||||
/**
|
||||
* Monitor Trinamic drivers
|
||||
* for error conditions like overtemperature and short to ground.
|
||||
|
|
@ -3152,6 +3180,8 @@
|
|||
#define STOP_ON_ERROR
|
||||
#endif
|
||||
|
||||
// @section tmc/hybrid
|
||||
|
||||
/**
|
||||
* TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only
|
||||
* The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD.
|
||||
|
|
@ -3208,6 +3238,7 @@
|
|||
* homing and adds a guard period for endstop triggering.
|
||||
*
|
||||
* Comment *_STALL_SENSITIVITY to disable sensorless homing for that axis.
|
||||
* @section tmc/stallguard
|
||||
*/
|
||||
//#define SENSORLESS_HOMING // StallGuard capable drivers only
|
||||
|
||||
|
|
@ -3231,6 +3262,8 @@
|
|||
//#define IMPROVE_HOMING_RELIABILITY
|
||||
#endif
|
||||
|
||||
// @section tmc/config
|
||||
|
||||
/**
|
||||
* TMC Homing stepper phase.
|
||||
*
|
||||
|
|
@ -3311,7 +3344,7 @@
|
|||
#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave
|
||||
#endif
|
||||
|
||||
// @section extras
|
||||
// @section photo
|
||||
|
||||
/**
|
||||
* Photo G-code
|
||||
|
|
@ -3354,6 +3387,8 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
// @section cnc
|
||||
|
||||
/**
|
||||
* Spindle & Laser control
|
||||
*
|
||||
|
|
@ -3558,6 +3593,8 @@
|
|||
#define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
|
||||
#endif
|
||||
|
||||
// @section filament width
|
||||
|
||||
/**
|
||||
* Filament Width Sensor
|
||||
*
|
||||
|
|
@ -3591,6 +3628,8 @@
|
|||
//#define FILAMENT_LCD_DISPLAY
|
||||
#endif
|
||||
|
||||
// @section power
|
||||
|
||||
/**
|
||||
* Power Monitor
|
||||
* Monitor voltage (V) and/or current (A), and -when possible- power (W)
|
||||
|
|
@ -3614,6 +3653,8 @@
|
|||
#define POWER_MONITOR_VOLTAGE_OFFSET 0 // Offset (in volts) applied to the calculated voltage
|
||||
#endif
|
||||
|
||||
// @section safety
|
||||
|
||||
/**
|
||||
* Stepper Driver Anti-SNAFU Protection
|
||||
*
|
||||
|
|
@ -3623,6 +3664,8 @@
|
|||
*/
|
||||
//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
|
||||
|
||||
// @section cnc
|
||||
|
||||
/**
|
||||
* CNC Coordinate Systems
|
||||
*
|
||||
|
|
@ -3639,6 +3682,8 @@
|
|||
*/
|
||||
//#define CNC_DRILLING_CYCLE
|
||||
|
||||
// @section reporting
|
||||
|
||||
/**
|
||||
* Auto-report fan speed with M123 S<seconds>
|
||||
* Requires fans with tachometer pins
|
||||
|
|
@ -3666,6 +3711,8 @@
|
|||
//#define M115_GEOMETRY_REPORT
|
||||
#endif
|
||||
|
||||
// @section security
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
|
|
@ -3673,6 +3720,8 @@
|
|||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
// @section volumetrics
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
|
|
@ -3701,14 +3750,7 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Enable this option for a leaner build of Marlin that removes all
|
||||
* workspace offsets, simplifying coordinate transformations, leveling, etc.
|
||||
*
|
||||
* - M206 and M428 are disabled.
|
||||
* - G92 will revert to its behavior from Marlin 1.0.
|
||||
*/
|
||||
//#define NO_WORKSPACE_OFFSETS
|
||||
// @section reporting
|
||||
|
||||
// Extra options for the M114 "Current Position" report
|
||||
//#define M114_DETAIL // Use 'M114` for details to check planner calculations
|
||||
|
|
@ -3717,6 +3759,8 @@
|
|||
|
||||
//#define REPORT_FAN_CHANGE // Report the new fan speed when changed by M106 (and others)
|
||||
|
||||
// @section gcode
|
||||
|
||||
/**
|
||||
* Spend 28 bytes of SRAM to optimize the G-code parser
|
||||
*/
|
||||
|
|
@ -3734,6 +3778,15 @@
|
|||
|
||||
//#define REPETIER_GCODE_M360 // Add commands originally from Repetier FW
|
||||
|
||||
/**
|
||||
* Enable this option for a leaner build of Marlin that removes all
|
||||
* workspace offsets, simplifying coordinate transformations, leveling, etc.
|
||||
*
|
||||
* - M206 and M428 are disabled.
|
||||
* - G92 will revert to its behavior from Marlin 1.0.
|
||||
*/
|
||||
//#define NO_WORKSPACE_OFFSETS
|
||||
|
||||
/**
|
||||
* CNC G-code options
|
||||
* Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.
|
||||
|
|
@ -3750,6 +3803,8 @@
|
|||
#endif
|
||||
//#define G0_ANGULAR_FEEDRATE 2700 // (°/min)
|
||||
|
||||
// @section gcode
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
|
|
@ -3774,6 +3829,8 @@
|
|||
* Up to 25 may be defined, but the actual number is LCD-dependent.
|
||||
*/
|
||||
|
||||
// @section custom main menu
|
||||
|
||||
// Custom Menu: Main Menu
|
||||
//#define CUSTOM_MENU_MAIN
|
||||
#if ENABLED(CUSTOM_MENU_MAIN)
|
||||
|
|
@ -3804,6 +3861,8 @@
|
|||
//#define MAIN_MENU_ITEM_5_CONFIRM
|
||||
#endif
|
||||
|
||||
// @section custom config menu
|
||||
|
||||
// Custom Menu: Configuration Menu
|
||||
//#define CUSTOM_MENU_CONFIG
|
||||
#if ENABLED(CUSTOM_MENU_CONFIG)
|
||||
|
|
@ -3834,6 +3893,8 @@
|
|||
//#define CONFIG_MENU_ITEM_5_CONFIRM
|
||||
#endif
|
||||
|
||||
// @section custom buttons
|
||||
|
||||
/**
|
||||
* User-defined buttons to run custom G-code.
|
||||
* Up to 25 may be defined.
|
||||
|
|
@ -3865,6 +3926,8 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
// @section host
|
||||
|
||||
/**
|
||||
* Host Action Commands
|
||||
*
|
||||
|
|
@ -3890,6 +3953,8 @@
|
|||
//#define HOST_SHUTDOWN_MENU_ITEM // Add a menu item that tells the host to shut down
|
||||
#endif
|
||||
|
||||
// @section extras
|
||||
|
||||
/**
|
||||
* Cancel Objects
|
||||
*
|
||||
|
|
@ -3911,6 +3976,7 @@
|
|||
* Alternative Supplier: https://reliabuild3d.com/
|
||||
*
|
||||
* Reliabuild encoders have been modified to improve reliability.
|
||||
* @section i2c encoders
|
||||
*/
|
||||
|
||||
//#define I2C_POSITION_ENCODERS
|
||||
|
|
@ -3982,6 +4048,7 @@
|
|||
|
||||
/**
|
||||
* Analog Joystick(s)
|
||||
* @section joystick
|
||||
*/
|
||||
//#define JOYSTICK
|
||||
#if ENABLED(JOYSTICK)
|
||||
|
|
@ -4006,6 +4073,7 @@
|
|||
* Modern replacement for the Prusa TMC_Z_CALIBRATION.
|
||||
* Adds capability to work with any adjustable current drivers.
|
||||
* Implemented as G34 because M915 is deprecated.
|
||||
* @section calibrate
|
||||
*/
|
||||
//#define MECHANICAL_GANTRY_CALIBRATION
|
||||
#if ENABLED(MECHANICAL_GANTRY_CALIBRATION)
|
||||
|
|
@ -4023,6 +4091,7 @@
|
|||
/**
|
||||
* Instant freeze / unfreeze functionality
|
||||
* Potentially useful for emergency stop that allows being resumed.
|
||||
* @section interface
|
||||
*/
|
||||
//#define FREEZE_FEATURE
|
||||
#if ENABLED(FREEZE_FEATURE)
|
||||
|
|
@ -4035,6 +4104,7 @@
|
|||
*
|
||||
* Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display.
|
||||
* Requires 3 signal wires. Some useful debug options are included to demonstrate its usage.
|
||||
* @section debug matrix
|
||||
*/
|
||||
//#define MAX7219_DEBUG
|
||||
#if ENABLED(MAX7219_DEBUG)
|
||||
|
|
@ -4073,6 +4143,7 @@
|
|||
* Support for Synchronized Z moves when used with NanoDLP. G0/G1 axis moves will
|
||||
* output a "Z_move_comp" string to enable synchronization with DLP projector exposure.
|
||||
* This feature allows you to use [[WaitForDoneMessage]] instead of M400 commands.
|
||||
* @section nanodlp
|
||||
*/
|
||||
//#define NANODLP_Z_SYNC
|
||||
#if ENABLED(NANODLP_Z_SYNC)
|
||||
|
|
@ -4081,6 +4152,7 @@
|
|||
|
||||
/**
|
||||
* Ethernet. Use M552 to enable and set the IP address.
|
||||
* @section network
|
||||
*/
|
||||
#if HAS_ETHERNET
|
||||
#define MAC_ADDRESS { 0xDE, 0xAD, 0xBE, 0xEF, 0xF0, 0x0D } // A MAC address unique to your network
|
||||
|
|
@ -4108,6 +4180,8 @@
|
|||
//#include "Configuration_Secure.h" // External file with WiFi SSID / Password
|
||||
#endif
|
||||
|
||||
// @section multi-material
|
||||
|
||||
/**
|
||||
* Průša Multi-Material Unit (MMU)
|
||||
* Enable in Configuration.h
|
||||
|
|
@ -4215,6 +4289,7 @@
|
|||
|
||||
/**
|
||||
* Advanced Print Counter settings
|
||||
* @section stats
|
||||
*/
|
||||
#if ENABLED(PRINTCOUNTER)
|
||||
#define SERVICE_WARNING_BUZZES 3
|
||||
|
|
|
|||
|
|
@ -114,6 +114,7 @@
|
|||
* :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
|
||||
*/
|
||||
#define BAUDRATE 250000
|
||||
|
||||
//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate
|
||||
|
||||
/**
|
||||
|
|
@ -122,7 +123,7 @@
|
|||
* :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
//#define SERIAL_PORT_2 -1
|
||||
//#define BAUDRATE_2 250000 // Enable to override BAUDRATE
|
||||
//#define BAUDRATE_2 250000 // :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] Enable to override BAUDRATE
|
||||
|
||||
/**
|
||||
* Select a third serial port on the board to use for communication with the host.
|
||||
|
|
@ -130,7 +131,7 @@
|
|||
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
//#define SERIAL_PORT_3 1
|
||||
//#define BAUDRATE_3 250000 // Enable to override BAUDRATE
|
||||
//#define BAUDRATE_3 250000 // :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] Enable to override BAUDRATE
|
||||
|
||||
// Enable the Bluetooth serial interface on AT90USB devices
|
||||
//#define BLUETOOTH
|
||||
|
|
@ -389,7 +390,7 @@
|
|||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
// @section psu control
|
||||
|
||||
/**
|
||||
* Power Supply Control
|
||||
|
|
@ -625,6 +626,8 @@
|
|||
//============================= PID Settings ================================
|
||||
//===========================================================================
|
||||
|
||||
// @section hotend temp
|
||||
|
||||
// Enable PIDTEMP for PID control or MPCTEMP for Predictive Model.
|
||||
// temperature control. Disable both for bang-bang heating.
|
||||
#define PIDTEMP // See the PID Tuning Guide at https://reprap.org/wiki/PID_Tuning
|
||||
|
|
@ -635,7 +638,8 @@
|
|||
#define PID_K1 0.95 // Smoothing factor within any PID loop
|
||||
|
||||
#if ENABLED(PIDTEMP)
|
||||
//#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders)
|
||||
//#define PID_DEBUG // Print PID debug data to the serial port. Use 'M303 D' to toggle activation.
|
||||
//#define PID_PARAMS_PER_HOTEND // Use separate PID parameters for each extruder (useful for mismatched extruders)
|
||||
// Set/get with G-code: M301 E[extruder number, 0-2]
|
||||
|
||||
#if ENABLED(PID_PARAMS_PER_HOTEND)
|
||||
|
|
@ -657,6 +661,7 @@
|
|||
* Use a physical model of the hotend to control temperature. When configured correctly
|
||||
* this gives better responsiveness and stability than PID and it also removes the need
|
||||
* for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model.
|
||||
* @section mpctemp
|
||||
*/
|
||||
#if ENABLED(MPCTEMP)
|
||||
//#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash)
|
||||
|
|
@ -724,7 +729,7 @@
|
|||
|
||||
#if ENABLED(PIDTEMPBED)
|
||||
//#define MIN_BED_POWER 0
|
||||
//#define PID_BED_DEBUG // Sends debug data to the serial port.
|
||||
//#define PID_BED_DEBUG // Print Bed PID debug data to the serial port.
|
||||
|
||||
#define DEFAULT_bedKp 369.610
|
||||
#define DEFAULT_bedKi 54.132
|
||||
|
|
@ -750,6 +755,7 @@
|
|||
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 200W
|
||||
* heater. If your configuration is significantly different than this and you don't understand
|
||||
* the issues involved, don't use chamber PID until someone else verifies that your hardware works.
|
||||
* @section chamber temp
|
||||
*/
|
||||
//#define PIDTEMPCHAMBER
|
||||
//#define CHAMBER_LIMIT_SWITCHING
|
||||
|
|
@ -764,7 +770,7 @@
|
|||
|
||||
#if ENABLED(PIDTEMPCHAMBER)
|
||||
#define MIN_CHAMBER_POWER 0
|
||||
//#define PID_CHAMBER_DEBUG // Sends debug data to the serial port.
|
||||
//#define PID_CHAMBER_DEBUG // Print Chamber PID debug data to the serial port.
|
||||
|
||||
// Lasko "MyHeat Personal Heater" (200w) modified with a Fotek SSR-10DA to control only the heating element
|
||||
// and placed inside the small Creality printer enclosure tent.
|
||||
|
|
@ -778,7 +784,6 @@
|
|||
#endif // PIDTEMPCHAMBER
|
||||
|
||||
#if ANY(PIDTEMP, PIDTEMPBED, PIDTEMPCHAMBER)
|
||||
//#define PID_DEBUG // Sends debug data to the serial port. Use 'M303 D' to toggle activation.
|
||||
//#define PID_OPENLOOP // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX
|
||||
//#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay
|
||||
#define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature
|
||||
|
|
@ -788,7 +793,7 @@
|
|||
//#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of flash)
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
// @section safety
|
||||
|
||||
/**
|
||||
* Prevent extrusion if the temperature is below EXTRUDE_MINTEMP.
|
||||
|
|
@ -856,6 +861,8 @@
|
|||
#define POLAR_SEGMENTS_PER_SECOND 5
|
||||
#endif
|
||||
|
||||
// @section delta
|
||||
|
||||
// Enable for DELTA kinematics and configure below
|
||||
//#define DELTA
|
||||
#if ENABLED(DELTA)
|
||||
|
|
@ -915,6 +922,8 @@
|
|||
//#define DELTA_DIAGONAL_ROD_TRIM_TOWER { 0.0, 0.0, 0.0 }
|
||||
#endif
|
||||
|
||||
// @section scara
|
||||
|
||||
/**
|
||||
* MORGAN_SCARA was developed by QHARLEY in South Africa in 2012-2013.
|
||||
* Implemented and slightly reworked by JCERNY in June, 2014.
|
||||
|
|
@ -958,6 +967,8 @@
|
|||
|
||||
#endif
|
||||
|
||||
// @section tpara
|
||||
|
||||
// Enable for TPARA kinematics and configure below
|
||||
//#define AXEL_TPARA
|
||||
#if ENABLED(AXEL_TPARA)
|
||||
|
|
@ -984,6 +995,8 @@
|
|||
#define PSI_HOMING_OFFSET 0
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
|
|
@ -995,7 +1008,7 @@
|
|||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
||||
// @section homing
|
||||
// @section endstops
|
||||
|
||||
// Specify here all the endstop connectors that are connected to any endstop or probe.
|
||||
// Almost all printers will be using one per axis. Probes will use one or more of the
|
||||
|
|
@ -1665,7 +1678,7 @@
|
|||
//#define V_HOME_DIR -1
|
||||
//#define W_HOME_DIR -1
|
||||
|
||||
// @section machine
|
||||
// @section geometry
|
||||
|
||||
// The size of the printable area
|
||||
#define X_BED_SIZE 300
|
||||
|
|
@ -2126,7 +2139,7 @@
|
|||
//============================= Additional Features ===========================
|
||||
//=============================================================================
|
||||
|
||||
// @section extras
|
||||
// @section eeprom
|
||||
|
||||
/**
|
||||
* EEPROM
|
||||
|
|
@ -2146,6 +2159,8 @@
|
|||
//#define EEPROM_INIT_NOW // Init EEPROM on first boot after a new build.
|
||||
#endif
|
||||
|
||||
// @section host
|
||||
|
||||
//
|
||||
// Host Keepalive
|
||||
//
|
||||
|
|
@ -2156,6 +2171,8 @@
|
|||
#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113.
|
||||
#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating
|
||||
|
||||
// @section units
|
||||
|
||||
//
|
||||
// G20/G21 Inch mode support
|
||||
//
|
||||
|
|
@ -2183,6 +2200,8 @@
|
|||
#define PREHEAT_2_TEMP_CHAMBER 35
|
||||
#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
|
||||
|
||||
// @section motion
|
||||
|
||||
/**
|
||||
* Nozzle Park
|
||||
*
|
||||
|
|
@ -2281,6 +2300,8 @@
|
|||
|
||||
#endif
|
||||
|
||||
// @section host
|
||||
|
||||
/**
|
||||
* Print Job Timer
|
||||
*
|
||||
|
|
@ -2307,6 +2328,8 @@
|
|||
*/
|
||||
#define PRINTJOB_TIMER_AUTOSTART
|
||||
|
||||
// @section stats
|
||||
|
||||
/**
|
||||
* Print Counter
|
||||
*
|
||||
|
|
@ -2324,6 +2347,8 @@
|
|||
#define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print
|
||||
#endif
|
||||
|
||||
// @section security
|
||||
|
||||
/**
|
||||
* Password
|
||||
*
|
||||
|
|
@ -2359,7 +2384,7 @@
|
|||
//============================= LCD and SD support ============================
|
||||
//=============================================================================
|
||||
|
||||
// @section lcd
|
||||
// @section interface
|
||||
|
||||
/**
|
||||
* LCD LANGUAGE
|
||||
|
|
@ -2516,6 +2541,7 @@
|
|||
//======================== LCD / Controller Selection =========================
|
||||
//======================== (Character-based LCDs) =========================
|
||||
//=============================================================================
|
||||
// @section lcd
|
||||
|
||||
//
|
||||
// RepRapDiscount Smart Controller.
|
||||
|
|
@ -3164,7 +3190,7 @@
|
|||
//=============================== Extra Features ==============================
|
||||
//=============================================================================
|
||||
|
||||
// @section extras
|
||||
// @section fans
|
||||
|
||||
// Set number of user-controlled fans. Disable to use all board-defined fans.
|
||||
// :[1,2,3,4,5,6,7,8]
|
||||
|
|
@ -3188,14 +3214,18 @@
|
|||
// duty cycle is attained.
|
||||
//#define SOFT_PWM_DITHER
|
||||
|
||||
// @section extras
|
||||
|
||||
// Support for the BariCUDA Paste Extruder
|
||||
//#define BARICUDA
|
||||
|
||||
// @section lights
|
||||
|
||||
// Temperature status LEDs that display the hotend and bed temperature.
|
||||
// If all hotends, bed temperature, and target temperature are under 54C
|
||||
// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis)
|
||||
//#define TEMP_STAT_LEDS
|
||||
|
||||
// Support for the BariCUDA Paste Extruder
|
||||
//#define BARICUDA
|
||||
|
||||
// Support for BlinkM/CyzRgb
|
||||
//#define BLINKM
|
||||
|
||||
|
|
@ -3281,6 +3311,8 @@
|
|||
#define PRINTER_EVENT_LEDS
|
||||
#endif
|
||||
|
||||
// @section servos
|
||||
|
||||
/**
|
||||
* Number of servos
|
||||
*
|
||||
|
|
|
|||
|
|
@ -32,6 +32,24 @@
|
|||
*/
|
||||
#define CONFIGURATION_ADV_H_VERSION 02010100
|
||||
|
||||
// @section develop
|
||||
|
||||
/**
|
||||
* Configuration Dump to JSON and INI format
|
||||
*
|
||||
* Dump the configuration as part of the build. (See signature.py)
|
||||
* Output files are saved with the build (e.g., .pio/build/mega2560).
|
||||
*
|
||||
* See `build_all_examples --ini` as an example of config.ini archiving.
|
||||
*
|
||||
* 1 = marlin_config.json - Dictionary containing the configuration.
|
||||
* This file is also generated for CONFIGURATION_EMBEDDING.
|
||||
* 2 = config.ini - File format for PlatformIO preprocessing.
|
||||
* 3 = schema.json - The entire configuration schema. (13 = pattern groups)
|
||||
* 4 = schema.yml - The entire configuration schema.
|
||||
*/
|
||||
//#define CONFIG_DUMP // :[1:'JSON', 2:'config.ini', 3:'schema.json', 4:'schema.yml']
|
||||
|
||||
//===========================================================================
|
||||
//============================= Thermal Settings ============================
|
||||
//===========================================================================
|
||||
|
|
@ -2558,6 +2576,8 @@
|
|||
#endif
|
||||
#endif // HAS_MULTI_EXTRUDER
|
||||
|
||||
// @section advanced pause
|
||||
|
||||
/**
|
||||
* Advanced Pause for Filament Change
|
||||
* - Adds the G-code M600 Filament Change to initiate a filament change.
|
||||
|
|
@ -2616,13 +2636,12 @@
|
|||
#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
|
||||
#endif
|
||||
|
||||
// @section tmc
|
||||
|
||||
/**
|
||||
* TMC26X Stepper Driver options
|
||||
*
|
||||
* The TMC26XStepper library is required for this stepper driver.
|
||||
* https://github.com/trinamic/TMC26XStepper
|
||||
* @section tmc/tmc26x
|
||||
*/
|
||||
#if HAS_DRIVER(TMC26X)
|
||||
|
||||
|
|
@ -2760,8 +2779,6 @@
|
|||
|
||||
#endif // TMC26X
|
||||
|
||||
// @section tmc_smart
|
||||
|
||||
/**
|
||||
* To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode
|
||||
* connect your SPI pins to the hardware SPI interface on your board and define
|
||||
|
|
@ -2777,6 +2794,7 @@
|
|||
*
|
||||
* TMCStepper library is required to use TMC stepper drivers.
|
||||
* https://github.com/teemuatlut/TMCStepper
|
||||
* @section tmc/config
|
||||
*/
|
||||
#if HAS_TRINAMIC_CONFIG
|
||||
|
||||
|
|
@ -3000,6 +3018,8 @@
|
|||
//#define E7_HOLD_MULTIPLIER 0.5
|
||||
#endif
|
||||
|
||||
// @section tmc/spi
|
||||
|
||||
/**
|
||||
* Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here.
|
||||
* The default pins can be found in your board's pins file.
|
||||
|
|
@ -3037,6 +3057,8 @@
|
|||
//#define TMC_SW_MISO -1
|
||||
//#define TMC_SW_SCK -1
|
||||
|
||||
// @section tmc/serial
|
||||
|
||||
/**
|
||||
* Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
|
||||
* Set the address using jumpers on pins MS1 and MS2.
|
||||
|
|
@ -3072,6 +3094,8 @@
|
|||
//#define E6_SLAVE_ADDRESS 0
|
||||
//#define E7_SLAVE_ADDRESS 0
|
||||
|
||||
// @section tmc/smart
|
||||
|
||||
/**
|
||||
* Software enable
|
||||
*
|
||||
|
|
@ -3080,6 +3104,8 @@
|
|||
*/
|
||||
//#define SOFTWARE_DRIVER_ENABLE
|
||||
|
||||
// @section tmc/stealthchop
|
||||
|
||||
/**
|
||||
* TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only
|
||||
* Use Trinamic's ultra quiet stepping mode.
|
||||
|
|
@ -3134,6 +3160,8 @@
|
|||
//#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
|
||||
//#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
|
||||
|
||||
// @section tmc/status
|
||||
|
||||
/**
|
||||
* Monitor Trinamic drivers
|
||||
* for error conditions like overtemperature and short to ground.
|
||||
|
|
@ -3153,6 +3181,8 @@
|
|||
#define STOP_ON_ERROR
|
||||
#endif
|
||||
|
||||
// @section tmc/hybrid
|
||||
|
||||
/**
|
||||
* TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only
|
||||
* The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD.
|
||||
|
|
@ -3209,6 +3239,7 @@
|
|||
* homing and adds a guard period for endstop triggering.
|
||||
*
|
||||
* Comment *_STALL_SENSITIVITY to disable sensorless homing for that axis.
|
||||
* @section tmc/stallguard
|
||||
*/
|
||||
//#define SENSORLESS_HOMING // StallGuard capable drivers only
|
||||
|
||||
|
|
@ -3232,6 +3263,8 @@
|
|||
//#define IMPROVE_HOMING_RELIABILITY
|
||||
#endif
|
||||
|
||||
// @section tmc/config
|
||||
|
||||
/**
|
||||
* TMC Homing stepper phase.
|
||||
*
|
||||
|
|
@ -3312,7 +3345,7 @@
|
|||
#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave
|
||||
#endif
|
||||
|
||||
// @section extras
|
||||
// @section photo
|
||||
|
||||
/**
|
||||
* Photo G-code
|
||||
|
|
@ -3355,6 +3388,8 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
// @section cnc
|
||||
|
||||
/**
|
||||
* Spindle & Laser control
|
||||
*
|
||||
|
|
@ -3559,6 +3594,8 @@
|
|||
#define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
|
||||
#endif
|
||||
|
||||
// @section filament width
|
||||
|
||||
/**
|
||||
* Filament Width Sensor
|
||||
*
|
||||
|
|
@ -3592,6 +3629,8 @@
|
|||
//#define FILAMENT_LCD_DISPLAY
|
||||
#endif
|
||||
|
||||
// @section power
|
||||
|
||||
/**
|
||||
* Power Monitor
|
||||
* Monitor voltage (V) and/or current (A), and -when possible- power (W)
|
||||
|
|
@ -3615,6 +3654,8 @@
|
|||
#define POWER_MONITOR_VOLTAGE_OFFSET 0 // Offset (in volts) applied to the calculated voltage
|
||||
#endif
|
||||
|
||||
// @section safety
|
||||
|
||||
/**
|
||||
* Stepper Driver Anti-SNAFU Protection
|
||||
*
|
||||
|
|
@ -3624,6 +3665,8 @@
|
|||
*/
|
||||
//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
|
||||
|
||||
// @section cnc
|
||||
|
||||
/**
|
||||
* CNC Coordinate Systems
|
||||
*
|
||||
|
|
@ -3640,6 +3683,8 @@
|
|||
*/
|
||||
//#define CNC_DRILLING_CYCLE
|
||||
|
||||
// @section reporting
|
||||
|
||||
/**
|
||||
* Auto-report fan speed with M123 S<seconds>
|
||||
* Requires fans with tachometer pins
|
||||
|
|
@ -3667,6 +3712,8 @@
|
|||
//#define M115_GEOMETRY_REPORT
|
||||
#endif
|
||||
|
||||
// @section security
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
|
|
@ -3674,6 +3721,8 @@
|
|||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
// @section volumetrics
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
|
|
@ -3702,14 +3751,7 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Enable this option for a leaner build of Marlin that removes all
|
||||
* workspace offsets, simplifying coordinate transformations, leveling, etc.
|
||||
*
|
||||
* - M206 and M428 are disabled.
|
||||
* - G92 will revert to its behavior from Marlin 1.0.
|
||||
*/
|
||||
//#define NO_WORKSPACE_OFFSETS
|
||||
// @section reporting
|
||||
|
||||
// Extra options for the M114 "Current Position" report
|
||||
//#define M114_DETAIL // Use 'M114` for details to check planner calculations
|
||||
|
|
@ -3718,6 +3760,8 @@
|
|||
|
||||
//#define REPORT_FAN_CHANGE // Report the new fan speed when changed by M106 (and others)
|
||||
|
||||
// @section gcode
|
||||
|
||||
/**
|
||||
* Spend 28 bytes of SRAM to optimize the G-code parser
|
||||
*/
|
||||
|
|
@ -3735,6 +3779,15 @@
|
|||
|
||||
//#define REPETIER_GCODE_M360 // Add commands originally from Repetier FW
|
||||
|
||||
/**
|
||||
* Enable this option for a leaner build of Marlin that removes all
|
||||
* workspace offsets, simplifying coordinate transformations, leveling, etc.
|
||||
*
|
||||
* - M206 and M428 are disabled.
|
||||
* - G92 will revert to its behavior from Marlin 1.0.
|
||||
*/
|
||||
//#define NO_WORKSPACE_OFFSETS
|
||||
|
||||
/**
|
||||
* CNC G-code options
|
||||
* Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.
|
||||
|
|
@ -3751,6 +3804,8 @@
|
|||
#endif
|
||||
//#define G0_ANGULAR_FEEDRATE 2700 // (°/min)
|
||||
|
||||
// @section gcode
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
|
|
@ -3775,6 +3830,8 @@
|
|||
* Up to 25 may be defined, but the actual number is LCD-dependent.
|
||||
*/
|
||||
|
||||
// @section custom main menu
|
||||
|
||||
// Custom Menu: Main Menu
|
||||
//#define CUSTOM_MENU_MAIN
|
||||
#if ENABLED(CUSTOM_MENU_MAIN)
|
||||
|
|
@ -3805,6 +3862,8 @@
|
|||
//#define MAIN_MENU_ITEM_5_CONFIRM
|
||||
#endif
|
||||
|
||||
// @section custom config menu
|
||||
|
||||
// Custom Menu: Configuration Menu
|
||||
//#define CUSTOM_MENU_CONFIG
|
||||
#if ENABLED(CUSTOM_MENU_CONFIG)
|
||||
|
|
@ -3835,6 +3894,8 @@
|
|||
//#define CONFIG_MENU_ITEM_5_CONFIRM
|
||||
#endif
|
||||
|
||||
// @section custom buttons
|
||||
|
||||
/**
|
||||
* User-defined buttons to run custom G-code.
|
||||
* Up to 25 may be defined.
|
||||
|
|
@ -3866,6 +3927,8 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
// @section host
|
||||
|
||||
/**
|
||||
* Host Action Commands
|
||||
*
|
||||
|
|
@ -3891,6 +3954,8 @@
|
|||
//#define HOST_SHUTDOWN_MENU_ITEM // Add a menu item that tells the host to shut down
|
||||
#endif
|
||||
|
||||
// @section extras
|
||||
|
||||
/**
|
||||
* Cancel Objects
|
||||
*
|
||||
|
|
@ -3912,6 +3977,7 @@
|
|||
* Alternative Supplier: https://reliabuild3d.com/
|
||||
*
|
||||
* Reliabuild encoders have been modified to improve reliability.
|
||||
* @section i2c encoders
|
||||
*/
|
||||
|
||||
//#define I2C_POSITION_ENCODERS
|
||||
|
|
@ -3983,6 +4049,7 @@
|
|||
|
||||
/**
|
||||
* Analog Joystick(s)
|
||||
* @section joystick
|
||||
*/
|
||||
//#define JOYSTICK
|
||||
#if ENABLED(JOYSTICK)
|
||||
|
|
@ -4007,6 +4074,7 @@
|
|||
* Modern replacement for the Prusa TMC_Z_CALIBRATION.
|
||||
* Adds capability to work with any adjustable current drivers.
|
||||
* Implemented as G34 because M915 is deprecated.
|
||||
* @section calibrate
|
||||
*/
|
||||
//#define MECHANICAL_GANTRY_CALIBRATION
|
||||
#if ENABLED(MECHANICAL_GANTRY_CALIBRATION)
|
||||
|
|
@ -4024,6 +4092,7 @@
|
|||
/**
|
||||
* Instant freeze / unfreeze functionality
|
||||
* Potentially useful for emergency stop that allows being resumed.
|
||||
* @section interface
|
||||
*/
|
||||
//#define FREEZE_FEATURE
|
||||
#if ENABLED(FREEZE_FEATURE)
|
||||
|
|
@ -4036,6 +4105,7 @@
|
|||
*
|
||||
* Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display.
|
||||
* Requires 3 signal wires. Some useful debug options are included to demonstrate its usage.
|
||||
* @section debug matrix
|
||||
*/
|
||||
//#define MAX7219_DEBUG
|
||||
#if ENABLED(MAX7219_DEBUG)
|
||||
|
|
@ -4074,6 +4144,7 @@
|
|||
* Support for Synchronized Z moves when used with NanoDLP. G0/G1 axis moves will
|
||||
* output a "Z_move_comp" string to enable synchronization with DLP projector exposure.
|
||||
* This feature allows you to use [[WaitForDoneMessage]] instead of M400 commands.
|
||||
* @section nanodlp
|
||||
*/
|
||||
//#define NANODLP_Z_SYNC
|
||||
#if ENABLED(NANODLP_Z_SYNC)
|
||||
|
|
@ -4082,6 +4153,7 @@
|
|||
|
||||
/**
|
||||
* Ethernet. Use M552 to enable and set the IP address.
|
||||
* @section network
|
||||
*/
|
||||
#if HAS_ETHERNET
|
||||
#define MAC_ADDRESS { 0xDE, 0xAD, 0xBE, 0xEF, 0xF0, 0x0D } // A MAC address unique to your network
|
||||
|
|
@ -4109,6 +4181,8 @@
|
|||
//#include "Configuration_Secure.h" // External file with WiFi SSID / Password
|
||||
#endif
|
||||
|
||||
// @section multi-material
|
||||
|
||||
/**
|
||||
* Průša Multi-Material Unit (MMU)
|
||||
* Enable in Configuration.h
|
||||
|
|
@ -4216,6 +4290,7 @@
|
|||
|
||||
/**
|
||||
* Advanced Print Counter settings
|
||||
* @section stats
|
||||
*/
|
||||
#if ENABLED(PRINTCOUNTER)
|
||||
#define SERVICE_WARNING_BUZZES 3
|
||||
|
|
|
|||
|
|
@ -114,6 +114,7 @@
|
|||
* :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
|
||||
*/
|
||||
#define BAUDRATE 250000
|
||||
|
||||
//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate
|
||||
|
||||
/**
|
||||
|
|
@ -122,7 +123,7 @@
|
|||
* :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
//#define SERIAL_PORT_2 -1
|
||||
//#define BAUDRATE_2 250000 // Enable to override BAUDRATE
|
||||
//#define BAUDRATE_2 250000 // :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] Enable to override BAUDRATE
|
||||
|
||||
/**
|
||||
* Select a third serial port on the board to use for communication with the host.
|
||||
|
|
@ -130,7 +131,7 @@
|
|||
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
//#define SERIAL_PORT_3 1
|
||||
//#define BAUDRATE_3 250000 // Enable to override BAUDRATE
|
||||
//#define BAUDRATE_3 250000 // :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] Enable to override BAUDRATE
|
||||
|
||||
// Enable the Bluetooth serial interface on AT90USB devices
|
||||
//#define BLUETOOTH
|
||||
|
|
@ -389,7 +390,7 @@
|
|||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
// @section psu control
|
||||
|
||||
/**
|
||||
* Power Supply Control
|
||||
|
|
@ -625,6 +626,8 @@
|
|||
//============================= PID Settings ================================
|
||||
//===========================================================================
|
||||
|
||||
// @section hotend temp
|
||||
|
||||
// Enable PIDTEMP for PID control or MPCTEMP for Predictive Model.
|
||||
// temperature control. Disable both for bang-bang heating.
|
||||
#define PIDTEMP // See the PID Tuning Guide at https://reprap.org/wiki/PID_Tuning
|
||||
|
|
@ -635,7 +638,8 @@
|
|||
#define PID_K1 0.95 // Smoothing factor within any PID loop
|
||||
|
||||
#if ENABLED(PIDTEMP)
|
||||
//#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders)
|
||||
//#define PID_DEBUG // Print PID debug data to the serial port. Use 'M303 D' to toggle activation.
|
||||
//#define PID_PARAMS_PER_HOTEND // Use separate PID parameters for each extruder (useful for mismatched extruders)
|
||||
// Set/get with G-code: M301 E[extruder number, 0-2]
|
||||
|
||||
#if ENABLED(PID_PARAMS_PER_HOTEND)
|
||||
|
|
@ -657,6 +661,7 @@
|
|||
* Use a physical model of the hotend to control temperature. When configured correctly
|
||||
* this gives better responsiveness and stability than PID and it also removes the need
|
||||
* for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model.
|
||||
* @section mpctemp
|
||||
*/
|
||||
#if ENABLED(MPCTEMP)
|
||||
//#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash)
|
||||
|
|
@ -724,7 +729,7 @@
|
|||
|
||||
#if ENABLED(PIDTEMPBED)
|
||||
//#define MIN_BED_POWER 0
|
||||
//#define PID_BED_DEBUG // Sends debug data to the serial port.
|
||||
//#define PID_BED_DEBUG // Print Bed PID debug data to the serial port.
|
||||
|
||||
// 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
|
||||
// from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
|
||||
|
|
@ -752,6 +757,7 @@
|
|||
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 200W
|
||||
* heater. If your configuration is significantly different than this and you don't understand
|
||||
* the issues involved, don't use chamber PID until someone else verifies that your hardware works.
|
||||
* @section chamber temp
|
||||
*/
|
||||
//#define PIDTEMPCHAMBER
|
||||
//#define CHAMBER_LIMIT_SWITCHING
|
||||
|
|
@ -766,7 +772,7 @@
|
|||
|
||||
#if ENABLED(PIDTEMPCHAMBER)
|
||||
#define MIN_CHAMBER_POWER 0
|
||||
//#define PID_CHAMBER_DEBUG // Sends debug data to the serial port.
|
||||
//#define PID_CHAMBER_DEBUG // Print Chamber PID debug data to the serial port.
|
||||
|
||||
// Lasko "MyHeat Personal Heater" (200w) modified with a Fotek SSR-10DA to control only the heating element
|
||||
// and placed inside the small Creality printer enclosure tent.
|
||||
|
|
@ -780,7 +786,6 @@
|
|||
#endif // PIDTEMPCHAMBER
|
||||
|
||||
#if ANY(PIDTEMP, PIDTEMPBED, PIDTEMPCHAMBER)
|
||||
//#define PID_DEBUG // Sends debug data to the serial port. Use 'M303 D' to toggle activation.
|
||||
//#define PID_OPENLOOP // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX
|
||||
//#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay
|
||||
#define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature
|
||||
|
|
@ -790,7 +795,7 @@
|
|||
//#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of flash)
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
// @section safety
|
||||
|
||||
/**
|
||||
* Prevent extrusion if the temperature is below EXTRUDE_MINTEMP.
|
||||
|
|
@ -858,6 +863,8 @@
|
|||
#define POLAR_SEGMENTS_PER_SECOND 5
|
||||
#endif
|
||||
|
||||
// @section delta
|
||||
|
||||
// Enable for DELTA kinematics and configure below
|
||||
//#define DELTA
|
||||
#if ENABLED(DELTA)
|
||||
|
|
@ -917,6 +924,8 @@
|
|||
//#define DELTA_DIAGONAL_ROD_TRIM_TOWER { 0.0, 0.0, 0.0 }
|
||||
#endif
|
||||
|
||||
// @section scara
|
||||
|
||||
/**
|
||||
* MORGAN_SCARA was developed by QHARLEY in South Africa in 2012-2013.
|
||||
* Implemented and slightly reworked by JCERNY in June, 2014.
|
||||
|
|
@ -960,6 +969,8 @@
|
|||
|
||||
#endif
|
||||
|
||||
// @section tpara
|
||||
|
||||
// Enable for TPARA kinematics and configure below
|
||||
//#define AXEL_TPARA
|
||||
#if ENABLED(AXEL_TPARA)
|
||||
|
|
@ -986,6 +997,8 @@
|
|||
#define PSI_HOMING_OFFSET 0
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
|
|
@ -997,7 +1010,7 @@
|
|||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
||||
// @section homing
|
||||
// @section endstops
|
||||
|
||||
// Specify here all the endstop connectors that are connected to any endstop or probe.
|
||||
// Almost all printers will be using one per axis. Probes will use one or more of the
|
||||
|
|
@ -1667,7 +1680,7 @@
|
|||
//#define V_HOME_DIR -1
|
||||
//#define W_HOME_DIR -1
|
||||
|
||||
// @section machine
|
||||
// @section geometry
|
||||
|
||||
// The size of the printable area
|
||||
#define X_BED_SIZE 265
|
||||
|
|
@ -2127,7 +2140,7 @@
|
|||
//============================= Additional Features ===========================
|
||||
//=============================================================================
|
||||
|
||||
// @section extras
|
||||
// @section eeprom
|
||||
|
||||
/**
|
||||
* EEPROM
|
||||
|
|
@ -2147,6 +2160,8 @@
|
|||
//#define EEPROM_INIT_NOW // Init EEPROM on first boot after a new build.
|
||||
#endif
|
||||
|
||||
// @section host
|
||||
|
||||
//
|
||||
// Host Keepalive
|
||||
//
|
||||
|
|
@ -2157,6 +2172,8 @@
|
|||
#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113.
|
||||
#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating
|
||||
|
||||
// @section units
|
||||
|
||||
//
|
||||
// G20/G21 Inch mode support
|
||||
//
|
||||
|
|
@ -2184,6 +2201,8 @@
|
|||
#define PREHEAT_2_TEMP_CHAMBER 35
|
||||
#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
|
||||
|
||||
// @section motion
|
||||
|
||||
/**
|
||||
* Nozzle Park
|
||||
*
|
||||
|
|
@ -2282,6 +2301,8 @@
|
|||
|
||||
#endif
|
||||
|
||||
// @section host
|
||||
|
||||
/**
|
||||
* Print Job Timer
|
||||
*
|
||||
|
|
@ -2308,6 +2329,8 @@
|
|||
*/
|
||||
#define PRINTJOB_TIMER_AUTOSTART
|
||||
|
||||
// @section stats
|
||||
|
||||
/**
|
||||
* Print Counter
|
||||
*
|
||||
|
|
@ -2325,6 +2348,8 @@
|
|||
#define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print
|
||||
#endif
|
||||
|
||||
// @section security
|
||||
|
||||
/**
|
||||
* Password
|
||||
*
|
||||
|
|
@ -2360,7 +2385,7 @@
|
|||
//============================= LCD and SD support ============================
|
||||
//=============================================================================
|
||||
|
||||
// @section lcd
|
||||
// @section interface
|
||||
|
||||
/**
|
||||
* LCD LANGUAGE
|
||||
|
|
@ -2516,6 +2541,7 @@
|
|||
//======================== LCD / Controller Selection =========================
|
||||
//======================== (Character-based LCDs) =========================
|
||||
//=============================================================================
|
||||
// @section lcd
|
||||
|
||||
//
|
||||
// RepRapDiscount Smart Controller.
|
||||
|
|
@ -3161,7 +3187,7 @@
|
|||
//=============================== Extra Features ==============================
|
||||
//=============================================================================
|
||||
|
||||
// @section extras
|
||||
// @section fans
|
||||
|
||||
// Set number of user-controlled fans. Disable to use all board-defined fans.
|
||||
// :[1,2,3,4,5,6,7,8]
|
||||
|
|
@ -3185,14 +3211,18 @@
|
|||
// duty cycle is attained.
|
||||
//#define SOFT_PWM_DITHER
|
||||
|
||||
// @section extras
|
||||
|
||||
// Support for the BariCUDA Paste Extruder
|
||||
//#define BARICUDA
|
||||
|
||||
// @section lights
|
||||
|
||||
// Temperature status LEDs that display the hotend and bed temperature.
|
||||
// If all hotends, bed temperature, and target temperature are under 54C
|
||||
// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis)
|
||||
//#define TEMP_STAT_LEDS
|
||||
|
||||
// Support for the BariCUDA Paste Extruder
|
||||
//#define BARICUDA
|
||||
|
||||
// Support for BlinkM/CyzRgb
|
||||
//#define BLINKM
|
||||
|
||||
|
|
@ -3278,6 +3308,8 @@
|
|||
#define PRINTER_EVENT_LEDS
|
||||
#endif
|
||||
|
||||
// @section servos
|
||||
|
||||
/**
|
||||
* Number of servos
|
||||
*
|
||||
|
|
|
|||
|
|
@ -32,6 +32,24 @@
|
|||
*/
|
||||
#define CONFIGURATION_ADV_H_VERSION 02010100
|
||||
|
||||
// @section develop
|
||||
|
||||
/**
|
||||
* Configuration Dump to JSON and INI format
|
||||
*
|
||||
* Dump the configuration as part of the build. (See signature.py)
|
||||
* Output files are saved with the build (e.g., .pio/build/mega2560).
|
||||
*
|
||||
* See `build_all_examples --ini` as an example of config.ini archiving.
|
||||
*
|
||||
* 1 = marlin_config.json - Dictionary containing the configuration.
|
||||
* This file is also generated for CONFIGURATION_EMBEDDING.
|
||||
* 2 = config.ini - File format for PlatformIO preprocessing.
|
||||
* 3 = schema.json - The entire configuration schema. (13 = pattern groups)
|
||||
* 4 = schema.yml - The entire configuration schema.
|
||||
*/
|
||||
//#define CONFIG_DUMP // :[1:'JSON', 2:'config.ini', 3:'schema.json', 4:'schema.yml']
|
||||
|
||||
//===========================================================================
|
||||
//============================= Thermal Settings ============================
|
||||
//===========================================================================
|
||||
|
|
@ -2558,6 +2576,8 @@
|
|||
#endif
|
||||
#endif // HAS_MULTI_EXTRUDER
|
||||
|
||||
// @section advanced pause
|
||||
|
||||
/**
|
||||
* Advanced Pause for Filament Change
|
||||
* - Adds the G-code M600 Filament Change to initiate a filament change.
|
||||
|
|
@ -2616,13 +2636,12 @@
|
|||
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
|
||||
#endif
|
||||
|
||||
// @section tmc
|
||||
|
||||
/**
|
||||
* TMC26X Stepper Driver options
|
||||
*
|
||||
* The TMC26XStepper library is required for this stepper driver.
|
||||
* https://github.com/trinamic/TMC26XStepper
|
||||
* @section tmc/tmc26x
|
||||
*/
|
||||
#if HAS_DRIVER(TMC26X)
|
||||
|
||||
|
|
@ -2760,8 +2779,6 @@
|
|||
|
||||
#endif // TMC26X
|
||||
|
||||
// @section tmc_smart
|
||||
|
||||
/**
|
||||
* To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode
|
||||
* connect your SPI pins to the hardware SPI interface on your board and define
|
||||
|
|
@ -2777,6 +2794,7 @@
|
|||
*
|
||||
* TMCStepper library is required to use TMC stepper drivers.
|
||||
* https://github.com/teemuatlut/TMCStepper
|
||||
* @section tmc/config
|
||||
*/
|
||||
#if HAS_TRINAMIC_CONFIG
|
||||
|
||||
|
|
@ -3000,6 +3018,8 @@
|
|||
//#define E7_HOLD_MULTIPLIER 0.5
|
||||
#endif
|
||||
|
||||
// @section tmc/spi
|
||||
|
||||
/**
|
||||
* Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here.
|
||||
* The default pins can be found in your board's pins file.
|
||||
|
|
@ -3037,6 +3057,8 @@
|
|||
//#define TMC_SW_MISO -1
|
||||
//#define TMC_SW_SCK -1
|
||||
|
||||
// @section tmc/serial
|
||||
|
||||
/**
|
||||
* Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
|
||||
* Set the address using jumpers on pins MS1 and MS2.
|
||||
|
|
@ -3072,6 +3094,8 @@
|
|||
//#define E6_SLAVE_ADDRESS 0
|
||||
//#define E7_SLAVE_ADDRESS 0
|
||||
|
||||
// @section tmc/smart
|
||||
|
||||
/**
|
||||
* Software enable
|
||||
*
|
||||
|
|
@ -3080,6 +3104,8 @@
|
|||
*/
|
||||
//#define SOFTWARE_DRIVER_ENABLE
|
||||
|
||||
// @section tmc/stealthchop
|
||||
|
||||
/**
|
||||
* TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only
|
||||
* Use Trinamic's ultra quiet stepping mode.
|
||||
|
|
@ -3134,6 +3160,8 @@
|
|||
//#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
|
||||
//#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
|
||||
|
||||
// @section tmc/status
|
||||
|
||||
/**
|
||||
* Monitor Trinamic drivers
|
||||
* for error conditions like overtemperature and short to ground.
|
||||
|
|
@ -3153,6 +3181,8 @@
|
|||
#define STOP_ON_ERROR
|
||||
#endif
|
||||
|
||||
// @section tmc/hybrid
|
||||
|
||||
/**
|
||||
* TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only
|
||||
* The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD.
|
||||
|
|
@ -3209,6 +3239,7 @@
|
|||
* homing and adds a guard period for endstop triggering.
|
||||
*
|
||||
* Comment *_STALL_SENSITIVITY to disable sensorless homing for that axis.
|
||||
* @section tmc/stallguard
|
||||
*/
|
||||
//#define SENSORLESS_HOMING // StallGuard capable drivers only
|
||||
|
||||
|
|
@ -3232,6 +3263,8 @@
|
|||
//#define IMPROVE_HOMING_RELIABILITY
|
||||
#endif
|
||||
|
||||
// @section tmc/config
|
||||
|
||||
/**
|
||||
* TMC Homing stepper phase.
|
||||
*
|
||||
|
|
@ -3312,7 +3345,7 @@
|
|||
#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave
|
||||
#endif
|
||||
|
||||
// @section extras
|
||||
// @section photo
|
||||
|
||||
/**
|
||||
* Photo G-code
|
||||
|
|
@ -3355,6 +3388,8 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
// @section cnc
|
||||
|
||||
/**
|
||||
* Spindle & Laser control
|
||||
*
|
||||
|
|
@ -3559,6 +3594,8 @@
|
|||
#define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
|
||||
#endif
|
||||
|
||||
// @section filament width
|
||||
|
||||
/**
|
||||
* Filament Width Sensor
|
||||
*
|
||||
|
|
@ -3592,6 +3629,8 @@
|
|||
//#define FILAMENT_LCD_DISPLAY
|
||||
#endif
|
||||
|
||||
// @section power
|
||||
|
||||
/**
|
||||
* Power Monitor
|
||||
* Monitor voltage (V) and/or current (A), and -when possible- power (W)
|
||||
|
|
@ -3615,6 +3654,8 @@
|
|||
#define POWER_MONITOR_VOLTAGE_OFFSET 0 // Offset (in volts) applied to the calculated voltage
|
||||
#endif
|
||||
|
||||
// @section safety
|
||||
|
||||
/**
|
||||
* Stepper Driver Anti-SNAFU Protection
|
||||
*
|
||||
|
|
@ -3624,6 +3665,8 @@
|
|||
*/
|
||||
//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
|
||||
|
||||
// @section cnc
|
||||
|
||||
/**
|
||||
* CNC Coordinate Systems
|
||||
*
|
||||
|
|
@ -3640,6 +3683,8 @@
|
|||
*/
|
||||
//#define CNC_DRILLING_CYCLE
|
||||
|
||||
// @section reporting
|
||||
|
||||
/**
|
||||
* Auto-report fan speed with M123 S<seconds>
|
||||
* Requires fans with tachometer pins
|
||||
|
|
@ -3667,6 +3712,8 @@
|
|||
//#define M115_GEOMETRY_REPORT
|
||||
#endif
|
||||
|
||||
// @section security
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
|
|
@ -3674,6 +3721,8 @@
|
|||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
// @section volumetrics
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
|
|
@ -3702,14 +3751,7 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Enable this option for a leaner build of Marlin that removes all
|
||||
* workspace offsets, simplifying coordinate transformations, leveling, etc.
|
||||
*
|
||||
* - M206 and M428 are disabled.
|
||||
* - G92 will revert to its behavior from Marlin 1.0.
|
||||
*/
|
||||
//#define NO_WORKSPACE_OFFSETS
|
||||
// @section reporting
|
||||
|
||||
// Extra options for the M114 "Current Position" report
|
||||
//#define M114_DETAIL // Use 'M114` for details to check planner calculations
|
||||
|
|
@ -3718,6 +3760,8 @@
|
|||
|
||||
//#define REPORT_FAN_CHANGE // Report the new fan speed when changed by M106 (and others)
|
||||
|
||||
// @section gcode
|
||||
|
||||
/**
|
||||
* Spend 28 bytes of SRAM to optimize the G-code parser
|
||||
*/
|
||||
|
|
@ -3735,6 +3779,15 @@
|
|||
|
||||
//#define REPETIER_GCODE_M360 // Add commands originally from Repetier FW
|
||||
|
||||
/**
|
||||
* Enable this option for a leaner build of Marlin that removes all
|
||||
* workspace offsets, simplifying coordinate transformations, leveling, etc.
|
||||
*
|
||||
* - M206 and M428 are disabled.
|
||||
* - G92 will revert to its behavior from Marlin 1.0.
|
||||
*/
|
||||
//#define NO_WORKSPACE_OFFSETS
|
||||
|
||||
/**
|
||||
* CNC G-code options
|
||||
* Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.
|
||||
|
|
@ -3751,6 +3804,8 @@
|
|||
#endif
|
||||
//#define G0_ANGULAR_FEEDRATE 2700 // (°/min)
|
||||
|
||||
// @section gcode
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
|
|
@ -3775,6 +3830,8 @@
|
|||
* Up to 25 may be defined, but the actual number is LCD-dependent.
|
||||
*/
|
||||
|
||||
// @section custom main menu
|
||||
|
||||
// Custom Menu: Main Menu
|
||||
//#define CUSTOM_MENU_MAIN
|
||||
#if ENABLED(CUSTOM_MENU_MAIN)
|
||||
|
|
@ -3805,6 +3862,8 @@
|
|||
//#define MAIN_MENU_ITEM_5_CONFIRM
|
||||
#endif
|
||||
|
||||
// @section custom config menu
|
||||
|
||||
// Custom Menu: Configuration Menu
|
||||
//#define CUSTOM_MENU_CONFIG
|
||||
#if ENABLED(CUSTOM_MENU_CONFIG)
|
||||
|
|
@ -3835,6 +3894,8 @@
|
|||
//#define CONFIG_MENU_ITEM_5_CONFIRM
|
||||
#endif
|
||||
|
||||
// @section custom buttons
|
||||
|
||||
/**
|
||||
* User-defined buttons to run custom G-code.
|
||||
* Up to 25 may be defined.
|
||||
|
|
@ -3866,6 +3927,8 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
// @section host
|
||||
|
||||
/**
|
||||
* Host Action Commands
|
||||
*
|
||||
|
|
@ -3891,6 +3954,8 @@
|
|||
//#define HOST_SHUTDOWN_MENU_ITEM // Add a menu item that tells the host to shut down
|
||||
#endif
|
||||
|
||||
// @section extras
|
||||
|
||||
/**
|
||||
* Cancel Objects
|
||||
*
|
||||
|
|
@ -3912,6 +3977,7 @@
|
|||
* Alternative Supplier: https://reliabuild3d.com/
|
||||
*
|
||||
* Reliabuild encoders have been modified to improve reliability.
|
||||
* @section i2c encoders
|
||||
*/
|
||||
|
||||
//#define I2C_POSITION_ENCODERS
|
||||
|
|
@ -3983,6 +4049,7 @@
|
|||
|
||||
/**
|
||||
* Analog Joystick(s)
|
||||
* @section joystick
|
||||
*/
|
||||
//#define JOYSTICK
|
||||
#if ENABLED(JOYSTICK)
|
||||
|
|
@ -4007,6 +4074,7 @@
|
|||
* Modern replacement for the Prusa TMC_Z_CALIBRATION.
|
||||
* Adds capability to work with any adjustable current drivers.
|
||||
* Implemented as G34 because M915 is deprecated.
|
||||
* @section calibrate
|
||||
*/
|
||||
//#define MECHANICAL_GANTRY_CALIBRATION
|
||||
#if ENABLED(MECHANICAL_GANTRY_CALIBRATION)
|
||||
|
|
@ -4024,6 +4092,7 @@
|
|||
/**
|
||||
* Instant freeze / unfreeze functionality
|
||||
* Potentially useful for emergency stop that allows being resumed.
|
||||
* @section interface
|
||||
*/
|
||||
//#define FREEZE_FEATURE
|
||||
#if ENABLED(FREEZE_FEATURE)
|
||||
|
|
@ -4036,6 +4105,7 @@
|
|||
*
|
||||
* Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display.
|
||||
* Requires 3 signal wires. Some useful debug options are included to demonstrate its usage.
|
||||
* @section debug matrix
|
||||
*/
|
||||
//#define MAX7219_DEBUG
|
||||
#if ENABLED(MAX7219_DEBUG)
|
||||
|
|
@ -4074,6 +4144,7 @@
|
|||
* Support for Synchronized Z moves when used with NanoDLP. G0/G1 axis moves will
|
||||
* output a "Z_move_comp" string to enable synchronization with DLP projector exposure.
|
||||
* This feature allows you to use [[WaitForDoneMessage]] instead of M400 commands.
|
||||
* @section nanodlp
|
||||
*/
|
||||
//#define NANODLP_Z_SYNC
|
||||
#if ENABLED(NANODLP_Z_SYNC)
|
||||
|
|
@ -4082,6 +4153,7 @@
|
|||
|
||||
/**
|
||||
* Ethernet. Use M552 to enable and set the IP address.
|
||||
* @section network
|
||||
*/
|
||||
#if HAS_ETHERNET
|
||||
#define MAC_ADDRESS { 0xDE, 0xAD, 0xBE, 0xEF, 0xF0, 0x0D } // A MAC address unique to your network
|
||||
|
|
@ -4109,6 +4181,8 @@
|
|||
//#include "Configuration_Secure.h" // External file with WiFi SSID / Password
|
||||
#endif
|
||||
|
||||
// @section multi-material
|
||||
|
||||
/**
|
||||
* Průša Multi-Material Unit (MMU)
|
||||
* Enable in Configuration.h
|
||||
|
|
@ -4216,6 +4290,7 @@
|
|||
|
||||
/**
|
||||
* Advanced Print Counter settings
|
||||
* @section stats
|
||||
*/
|
||||
#if ENABLED(PRINTCOUNTER)
|
||||
#define SERVICE_WARNING_BUZZES 3
|
||||
|
|
|
|||
|
|
@ -114,6 +114,7 @@
|
|||
* :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
|
||||
*/
|
||||
#define BAUDRATE 250000
|
||||
|
||||
//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate
|
||||
|
||||
/**
|
||||
|
|
@ -122,7 +123,7 @@
|
|||
* :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
//#define SERIAL_PORT_2 -1
|
||||
//#define BAUDRATE_2 250000 // Enable to override BAUDRATE
|
||||
//#define BAUDRATE_2 250000 // :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] Enable to override BAUDRATE
|
||||
|
||||
/**
|
||||
* Select a third serial port on the board to use for communication with the host.
|
||||
|
|
@ -130,7 +131,7 @@
|
|||
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
//#define SERIAL_PORT_3 1
|
||||
//#define BAUDRATE_3 250000 // Enable to override BAUDRATE
|
||||
//#define BAUDRATE_3 250000 // :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] Enable to override BAUDRATE
|
||||
|
||||
// Enable the Bluetooth serial interface on AT90USB devices
|
||||
//#define BLUETOOTH
|
||||
|
|
@ -389,7 +390,7 @@
|
|||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
// @section psu control
|
||||
|
||||
/**
|
||||
* Power Supply Control
|
||||
|
|
@ -625,6 +626,8 @@
|
|||
//============================= PID Settings ================================
|
||||
//===========================================================================
|
||||
|
||||
// @section hotend temp
|
||||
|
||||
// Enable PIDTEMP for PID control or MPCTEMP for Predictive Model.
|
||||
// temperature control. Disable both for bang-bang heating.
|
||||
#define PIDTEMP // See the PID Tuning Guide at https://reprap.org/wiki/PID_Tuning
|
||||
|
|
@ -635,7 +638,8 @@
|
|||
#define PID_K1 0.95 // Smoothing factor within any PID loop
|
||||
|
||||
#if ENABLED(PIDTEMP)
|
||||
//#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders)
|
||||
//#define PID_DEBUG // Print PID debug data to the serial port. Use 'M303 D' to toggle activation.
|
||||
//#define PID_PARAMS_PER_HOTEND // Use separate PID parameters for each extruder (useful for mismatched extruders)
|
||||
// Set/get with G-code: M301 E[extruder number, 0-2]
|
||||
|
||||
#if ENABLED(PID_PARAMS_PER_HOTEND)
|
||||
|
|
@ -657,6 +661,7 @@
|
|||
* Use a physical model of the hotend to control temperature. When configured correctly
|
||||
* this gives better responsiveness and stability than PID and it also removes the need
|
||||
* for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model.
|
||||
* @section mpctemp
|
||||
*/
|
||||
#if ENABLED(MPCTEMP)
|
||||
//#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash)
|
||||
|
|
@ -724,7 +729,7 @@
|
|||
|
||||
#if ENABLED(PIDTEMPBED)
|
||||
//#define MIN_BED_POWER 0
|
||||
//#define PID_BED_DEBUG // Sends debug data to the serial port.
|
||||
//#define PID_BED_DEBUG // Print Bed PID debug data to the serial port.
|
||||
|
||||
// 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
|
||||
// from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
|
||||
|
|
@ -751,6 +756,7 @@
|
|||
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 200W
|
||||
* heater. If your configuration is significantly different than this and you don't understand
|
||||
* the issues involved, don't use chamber PID until someone else verifies that your hardware works.
|
||||
* @section chamber temp
|
||||
*/
|
||||
//#define PIDTEMPCHAMBER
|
||||
//#define CHAMBER_LIMIT_SWITCHING
|
||||
|
|
@ -765,7 +771,7 @@
|
|||
|
||||
#if ENABLED(PIDTEMPCHAMBER)
|
||||
#define MIN_CHAMBER_POWER 0
|
||||
//#define PID_CHAMBER_DEBUG // Sends debug data to the serial port.
|
||||
//#define PID_CHAMBER_DEBUG // Print Chamber PID debug data to the serial port.
|
||||
|
||||
// Lasko "MyHeat Personal Heater" (200w) modified with a Fotek SSR-10DA to control only the heating element
|
||||
// and placed inside the small Creality printer enclosure tent.
|
||||
|
|
@ -779,7 +785,6 @@
|
|||
#endif // PIDTEMPCHAMBER
|
||||
|
||||
#if ANY(PIDTEMP, PIDTEMPBED, PIDTEMPCHAMBER)
|
||||
//#define PID_DEBUG // Sends debug data to the serial port. Use 'M303 D' to toggle activation.
|
||||
//#define PID_OPENLOOP // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX
|
||||
//#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay
|
||||
#define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature
|
||||
|
|
@ -789,7 +794,7 @@
|
|||
//#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of flash)
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
// @section safety
|
||||
|
||||
/**
|
||||
* Prevent extrusion if the temperature is below EXTRUDE_MINTEMP.
|
||||
|
|
@ -857,6 +862,8 @@
|
|||
#define POLAR_SEGMENTS_PER_SECOND 5
|
||||
#endif
|
||||
|
||||
// @section delta
|
||||
|
||||
// Enable for DELTA kinematics and configure below
|
||||
//#define DELTA
|
||||
#if ENABLED(DELTA)
|
||||
|
|
@ -916,6 +923,8 @@
|
|||
//#define DELTA_DIAGONAL_ROD_TRIM_TOWER { 0.0, 0.0, 0.0 }
|
||||
#endif
|
||||
|
||||
// @section scara
|
||||
|
||||
/**
|
||||
* MORGAN_SCARA was developed by QHARLEY in South Africa in 2012-2013.
|
||||
* Implemented and slightly reworked by JCERNY in June, 2014.
|
||||
|
|
@ -959,6 +968,8 @@
|
|||
|
||||
#endif
|
||||
|
||||
// @section tpara
|
||||
|
||||
// Enable for TPARA kinematics and configure below
|
||||
//#define AXEL_TPARA
|
||||
#if ENABLED(AXEL_TPARA)
|
||||
|
|
@ -985,6 +996,8 @@
|
|||
#define PSI_HOMING_OFFSET 0
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
|
|
@ -996,7 +1009,7 @@
|
|||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
||||
// @section homing
|
||||
// @section endstops
|
||||
|
||||
// Specify here all the endstop connectors that are connected to any endstop or probe.
|
||||
// Almost all printers will be using one per axis. Probes will use one or more of the
|
||||
|
|
@ -1666,7 +1679,7 @@
|
|||
//#define V_HOME_DIR -1
|
||||
//#define W_HOME_DIR -1
|
||||
|
||||
// @section machine
|
||||
// @section geometry
|
||||
|
||||
// The size of the printable area
|
||||
#define X_BED_SIZE 130
|
||||
|
|
@ -2127,7 +2140,7 @@
|
|||
//============================= Additional Features ===========================
|
||||
//=============================================================================
|
||||
|
||||
// @section extras
|
||||
// @section eeprom
|
||||
|
||||
/**
|
||||
* EEPROM
|
||||
|
|
@ -2147,6 +2160,8 @@
|
|||
//#define EEPROM_INIT_NOW // Init EEPROM on first boot after a new build.
|
||||
#endif
|
||||
|
||||
// @section host
|
||||
|
||||
//
|
||||
// Host Keepalive
|
||||
//
|
||||
|
|
@ -2157,6 +2172,8 @@
|
|||
#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113.
|
||||
#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating
|
||||
|
||||
// @section units
|
||||
|
||||
//
|
||||
// G20/G21 Inch mode support
|
||||
//
|
||||
|
|
@ -2184,6 +2201,8 @@
|
|||
#define PREHEAT_2_TEMP_CHAMBER 35
|
||||
#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
|
||||
|
||||
// @section motion
|
||||
|
||||
/**
|
||||
* Nozzle Park
|
||||
*
|
||||
|
|
@ -2282,6 +2301,8 @@
|
|||
|
||||
#endif
|
||||
|
||||
// @section host
|
||||
|
||||
/**
|
||||
* Print Job Timer
|
||||
*
|
||||
|
|
@ -2308,6 +2329,8 @@
|
|||
*/
|
||||
#define PRINTJOB_TIMER_AUTOSTART
|
||||
|
||||
// @section stats
|
||||
|
||||
/**
|
||||
* Print Counter
|
||||
*
|
||||
|
|
@ -2325,6 +2348,8 @@
|
|||
#define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print
|
||||
#endif
|
||||
|
||||
// @section security
|
||||
|
||||
/**
|
||||
* Password
|
||||
*
|
||||
|
|
@ -2360,7 +2385,7 @@
|
|||
//============================= LCD and SD support ============================
|
||||
//=============================================================================
|
||||
|
||||
// @section lcd
|
||||
// @section interface
|
||||
|
||||
/**
|
||||
* LCD LANGUAGE
|
||||
|
|
@ -2517,6 +2542,7 @@
|
|||
//======================== LCD / Controller Selection =========================
|
||||
//======================== (Character-based LCDs) =========================
|
||||
//=============================================================================
|
||||
// @section lcd
|
||||
|
||||
//
|
||||
// RepRapDiscount Smart Controller.
|
||||
|
|
@ -3165,7 +3191,7 @@
|
|||
//=============================== Extra Features ==============================
|
||||
//=============================================================================
|
||||
|
||||
// @section extras
|
||||
// @section fans
|
||||
|
||||
// Set number of user-controlled fans. Disable to use all board-defined fans.
|
||||
// :[1,2,3,4,5,6,7,8]
|
||||
|
|
@ -3189,14 +3215,18 @@
|
|||
// duty cycle is attained.
|
||||
//#define SOFT_PWM_DITHER
|
||||
|
||||
// @section extras
|
||||
|
||||
// Support for the BariCUDA Paste Extruder
|
||||
//#define BARICUDA
|
||||
|
||||
// @section lights
|
||||
|
||||
// Temperature status LEDs that display the hotend and bed temperature.
|
||||
// If all hotends, bed temperature, and target temperature are under 54C
|
||||
// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis)
|
||||
//#define TEMP_STAT_LEDS
|
||||
|
||||
// Support for the BariCUDA Paste Extruder
|
||||
//#define BARICUDA
|
||||
|
||||
// Support for BlinkM/CyzRgb
|
||||
//#define BLINKM
|
||||
|
||||
|
|
@ -3282,6 +3312,8 @@
|
|||
#define PRINTER_EVENT_LEDS
|
||||
#endif
|
||||
|
||||
// @section servos
|
||||
|
||||
/**
|
||||
* Number of servos
|
||||
*
|
||||
|
|
|
|||
|
|
@ -32,6 +32,24 @@
|
|||
*/
|
||||
#define CONFIGURATION_ADV_H_VERSION 02010100
|
||||
|
||||
// @section develop
|
||||
|
||||
/**
|
||||
* Configuration Dump to JSON and INI format
|
||||
*
|
||||
* Dump the configuration as part of the build. (See signature.py)
|
||||
* Output files are saved with the build (e.g., .pio/build/mega2560).
|
||||
*
|
||||
* See `build_all_examples --ini` as an example of config.ini archiving.
|
||||
*
|
||||
* 1 = marlin_config.json - Dictionary containing the configuration.
|
||||
* This file is also generated for CONFIGURATION_EMBEDDING.
|
||||
* 2 = config.ini - File format for PlatformIO preprocessing.
|
||||
* 3 = schema.json - The entire configuration schema. (13 = pattern groups)
|
||||
* 4 = schema.yml - The entire configuration schema.
|
||||
*/
|
||||
//#define CONFIG_DUMP // :[1:'JSON', 2:'config.ini', 3:'schema.json', 4:'schema.yml']
|
||||
|
||||
//===========================================================================
|
||||
//============================= Thermal Settings ============================
|
||||
//===========================================================================
|
||||
|
|
@ -2558,6 +2576,8 @@
|
|||
#endif
|
||||
#endif // HAS_MULTI_EXTRUDER
|
||||
|
||||
// @section advanced pause
|
||||
|
||||
/**
|
||||
* Advanced Pause for Filament Change
|
||||
* - Adds the G-code M600 Filament Change to initiate a filament change.
|
||||
|
|
@ -2615,13 +2635,12 @@
|
|||
#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
|
||||
#endif
|
||||
|
||||
// @section tmc
|
||||
|
||||
/**
|
||||
* TMC26X Stepper Driver options
|
||||
*
|
||||
* The TMC26XStepper library is required for this stepper driver.
|
||||
* https://github.com/trinamic/TMC26XStepper
|
||||
* @section tmc/tmc26x
|
||||
*/
|
||||
#if HAS_DRIVER(TMC26X)
|
||||
|
||||
|
|
@ -2759,8 +2778,6 @@
|
|||
|
||||
#endif // TMC26X
|
||||
|
||||
// @section tmc_smart
|
||||
|
||||
/**
|
||||
* To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode
|
||||
* connect your SPI pins to the hardware SPI interface on your board and define
|
||||
|
|
@ -2776,6 +2793,7 @@
|
|||
*
|
||||
* TMCStepper library is required to use TMC stepper drivers.
|
||||
* https://github.com/teemuatlut/TMCStepper
|
||||
* @section tmc/config
|
||||
*/
|
||||
#if HAS_TRINAMIC_CONFIG
|
||||
|
||||
|
|
@ -2999,6 +3017,8 @@
|
|||
//#define E7_HOLD_MULTIPLIER 0.5
|
||||
#endif
|
||||
|
||||
// @section tmc/spi
|
||||
|
||||
/**
|
||||
* Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here.
|
||||
* The default pins can be found in your board's pins file.
|
||||
|
|
@ -3036,6 +3056,8 @@
|
|||
//#define TMC_SW_MISO -1
|
||||
//#define TMC_SW_SCK -1
|
||||
|
||||
// @section tmc/serial
|
||||
|
||||
/**
|
||||
* Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
|
||||
* Set the address using jumpers on pins MS1 and MS2.
|
||||
|
|
@ -3071,6 +3093,8 @@
|
|||
//#define E6_SLAVE_ADDRESS 0
|
||||
//#define E7_SLAVE_ADDRESS 0
|
||||
|
||||
// @section tmc/smart
|
||||
|
||||
/**
|
||||
* Software enable
|
||||
*
|
||||
|
|
@ -3079,6 +3103,8 @@
|
|||
*/
|
||||
//#define SOFTWARE_DRIVER_ENABLE
|
||||
|
||||
// @section tmc/stealthchop
|
||||
|
||||
/**
|
||||
* TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only
|
||||
* Use Trinamic's ultra quiet stepping mode.
|
||||
|
|
@ -3133,6 +3159,8 @@
|
|||
//#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
|
||||
//#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
|
||||
|
||||
// @section tmc/status
|
||||
|
||||
/**
|
||||
* Monitor Trinamic drivers
|
||||
* for error conditions like overtemperature and short to ground.
|
||||
|
|
@ -3152,6 +3180,8 @@
|
|||
#define STOP_ON_ERROR
|
||||
#endif
|
||||
|
||||
// @section tmc/hybrid
|
||||
|
||||
/**
|
||||
* TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only
|
||||
* The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD.
|
||||
|
|
@ -3208,6 +3238,7 @@
|
|||
* homing and adds a guard period for endstop triggering.
|
||||
*
|
||||
* Comment *_STALL_SENSITIVITY to disable sensorless homing for that axis.
|
||||
* @section tmc/stallguard
|
||||
*/
|
||||
//#define SENSORLESS_HOMING // StallGuard capable drivers only
|
||||
|
||||
|
|
@ -3231,6 +3262,8 @@
|
|||
//#define IMPROVE_HOMING_RELIABILITY
|
||||
#endif
|
||||
|
||||
// @section tmc/config
|
||||
|
||||
/**
|
||||
* TMC Homing stepper phase.
|
||||
*
|
||||
|
|
@ -3311,7 +3344,7 @@
|
|||
#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave
|
||||
#endif
|
||||
|
||||
// @section extras
|
||||
// @section photo
|
||||
|
||||
/**
|
||||
* Photo G-code
|
||||
|
|
@ -3354,6 +3387,8 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
// @section cnc
|
||||
|
||||
/**
|
||||
* Spindle & Laser control
|
||||
*
|
||||
|
|
@ -3558,6 +3593,8 @@
|
|||
#define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
|
||||
#endif
|
||||
|
||||
// @section filament width
|
||||
|
||||
/**
|
||||
* Filament Width Sensor
|
||||
*
|
||||
|
|
@ -3591,6 +3628,8 @@
|
|||
//#define FILAMENT_LCD_DISPLAY
|
||||
#endif
|
||||
|
||||
// @section power
|
||||
|
||||
/**
|
||||
* Power Monitor
|
||||
* Monitor voltage (V) and/or current (A), and -when possible- power (W)
|
||||
|
|
@ -3614,6 +3653,8 @@
|
|||
#define POWER_MONITOR_VOLTAGE_OFFSET 0 // Offset (in volts) applied to the calculated voltage
|
||||
#endif
|
||||
|
||||
// @section safety
|
||||
|
||||
/**
|
||||
* Stepper Driver Anti-SNAFU Protection
|
||||
*
|
||||
|
|
@ -3623,6 +3664,8 @@
|
|||
*/
|
||||
//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
|
||||
|
||||
// @section cnc
|
||||
|
||||
/**
|
||||
* CNC Coordinate Systems
|
||||
*
|
||||
|
|
@ -3639,6 +3682,8 @@
|
|||
*/
|
||||
//#define CNC_DRILLING_CYCLE
|
||||
|
||||
// @section reporting
|
||||
|
||||
/**
|
||||
* Auto-report fan speed with M123 S<seconds>
|
||||
* Requires fans with tachometer pins
|
||||
|
|
@ -3666,6 +3711,8 @@
|
|||
//#define M115_GEOMETRY_REPORT
|
||||
#endif
|
||||
|
||||
// @section security
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
|
|
@ -3673,6 +3720,8 @@
|
|||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
// @section volumetrics
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
|
|
@ -3701,14 +3750,7 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Enable this option for a leaner build of Marlin that removes all
|
||||
* workspace offsets, simplifying coordinate transformations, leveling, etc.
|
||||
*
|
||||
* - M206 and M428 are disabled.
|
||||
* - G92 will revert to its behavior from Marlin 1.0.
|
||||
*/
|
||||
//#define NO_WORKSPACE_OFFSETS
|
||||
// @section reporting
|
||||
|
||||
// Extra options for the M114 "Current Position" report
|
||||
//#define M114_DETAIL // Use 'M114` for details to check planner calculations
|
||||
|
|
@ -3717,6 +3759,8 @@
|
|||
|
||||
//#define REPORT_FAN_CHANGE // Report the new fan speed when changed by M106 (and others)
|
||||
|
||||
// @section gcode
|
||||
|
||||
/**
|
||||
* Spend 28 bytes of SRAM to optimize the G-code parser
|
||||
*/
|
||||
|
|
@ -3734,6 +3778,15 @@
|
|||
|
||||
//#define REPETIER_GCODE_M360 // Add commands originally from Repetier FW
|
||||
|
||||
/**
|
||||
* Enable this option for a leaner build of Marlin that removes all
|
||||
* workspace offsets, simplifying coordinate transformations, leveling, etc.
|
||||
*
|
||||
* - M206 and M428 are disabled.
|
||||
* - G92 will revert to its behavior from Marlin 1.0.
|
||||
*/
|
||||
//#define NO_WORKSPACE_OFFSETS
|
||||
|
||||
/**
|
||||
* CNC G-code options
|
||||
* Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.
|
||||
|
|
@ -3750,6 +3803,8 @@
|
|||
#endif
|
||||
//#define G0_ANGULAR_FEEDRATE 2700 // (°/min)
|
||||
|
||||
// @section gcode
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
|
|
@ -3774,6 +3829,8 @@
|
|||
* Up to 25 may be defined, but the actual number is LCD-dependent.
|
||||
*/
|
||||
|
||||
// @section custom main menu
|
||||
|
||||
// Custom Menu: Main Menu
|
||||
//#define CUSTOM_MENU_MAIN
|
||||
#if ENABLED(CUSTOM_MENU_MAIN)
|
||||
|
|
@ -3804,6 +3861,8 @@
|
|||
//#define MAIN_MENU_ITEM_5_CONFIRM
|
||||
#endif
|
||||
|
||||
// @section custom config menu
|
||||
|
||||
// Custom Menu: Configuration Menu
|
||||
//#define CUSTOM_MENU_CONFIG
|
||||
#if ENABLED(CUSTOM_MENU_CONFIG)
|
||||
|
|
@ -3834,6 +3893,8 @@
|
|||
//#define CONFIG_MENU_ITEM_5_CONFIRM
|
||||
#endif
|
||||
|
||||
// @section custom buttons
|
||||
|
||||
/**
|
||||
* User-defined buttons to run custom G-code.
|
||||
* Up to 25 may be defined.
|
||||
|
|
@ -3865,6 +3926,8 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
// @section host
|
||||
|
||||
/**
|
||||
* Host Action Commands
|
||||
*
|
||||
|
|
@ -3890,6 +3953,8 @@
|
|||
//#define HOST_SHUTDOWN_MENU_ITEM // Add a menu item that tells the host to shut down
|
||||
#endif
|
||||
|
||||
// @section extras
|
||||
|
||||
/**
|
||||
* Cancel Objects
|
||||
*
|
||||
|
|
@ -3911,6 +3976,7 @@
|
|||
* Alternative Supplier: https://reliabuild3d.com/
|
||||
*
|
||||
* Reliabuild encoders have been modified to improve reliability.
|
||||
* @section i2c encoders
|
||||
*/
|
||||
|
||||
//#define I2C_POSITION_ENCODERS
|
||||
|
|
@ -3982,6 +4048,7 @@
|
|||
|
||||
/**
|
||||
* Analog Joystick(s)
|
||||
* @section joystick
|
||||
*/
|
||||
//#define JOYSTICK
|
||||
#if ENABLED(JOYSTICK)
|
||||
|
|
@ -4006,6 +4073,7 @@
|
|||
* Modern replacement for the Prusa TMC_Z_CALIBRATION.
|
||||
* Adds capability to work with any adjustable current drivers.
|
||||
* Implemented as G34 because M915 is deprecated.
|
||||
* @section calibrate
|
||||
*/
|
||||
//#define MECHANICAL_GANTRY_CALIBRATION
|
||||
#if ENABLED(MECHANICAL_GANTRY_CALIBRATION)
|
||||
|
|
@ -4023,6 +4091,7 @@
|
|||
/**
|
||||
* Instant freeze / unfreeze functionality
|
||||
* Potentially useful for emergency stop that allows being resumed.
|
||||
* @section interface
|
||||
*/
|
||||
//#define FREEZE_FEATURE
|
||||
#if ENABLED(FREEZE_FEATURE)
|
||||
|
|
@ -4035,6 +4104,7 @@
|
|||
*
|
||||
* Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display.
|
||||
* Requires 3 signal wires. Some useful debug options are included to demonstrate its usage.
|
||||
* @section debug matrix
|
||||
*/
|
||||
//#define MAX7219_DEBUG
|
||||
#if ENABLED(MAX7219_DEBUG)
|
||||
|
|
@ -4073,6 +4143,7 @@
|
|||
* Support for Synchronized Z moves when used with NanoDLP. G0/G1 axis moves will
|
||||
* output a "Z_move_comp" string to enable synchronization with DLP projector exposure.
|
||||
* This feature allows you to use [[WaitForDoneMessage]] instead of M400 commands.
|
||||
* @section nanodlp
|
||||
*/
|
||||
//#define NANODLP_Z_SYNC
|
||||
#if ENABLED(NANODLP_Z_SYNC)
|
||||
|
|
@ -4081,6 +4152,7 @@
|
|||
|
||||
/**
|
||||
* Ethernet. Use M552 to enable and set the IP address.
|
||||
* @section network
|
||||
*/
|
||||
#if HAS_ETHERNET
|
||||
#define MAC_ADDRESS { 0xDE, 0xAD, 0xBE, 0xEF, 0xF0, 0x0D } // A MAC address unique to your network
|
||||
|
|
@ -4108,6 +4180,8 @@
|
|||
//#include "Configuration_Secure.h" // External file with WiFi SSID / Password
|
||||
#endif
|
||||
|
||||
// @section multi-material
|
||||
|
||||
/**
|
||||
* Průša Multi-Material Unit (MMU)
|
||||
* Enable in Configuration.h
|
||||
|
|
@ -4215,6 +4289,7 @@
|
|||
|
||||
/**
|
||||
* Advanced Print Counter settings
|
||||
* @section stats
|
||||
*/
|
||||
#if ENABLED(PRINTCOUNTER)
|
||||
#define SERVICE_WARNING_BUZZES 3
|
||||
|
|
|
|||
|
|
@ -114,6 +114,7 @@
|
|||
* :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
|
||||
*/
|
||||
#define BAUDRATE 250000
|
||||
|
||||
//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate
|
||||
|
||||
/**
|
||||
|
|
@ -122,7 +123,7 @@
|
|||
* :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
//#define SERIAL_PORT_2 -1
|
||||
//#define BAUDRATE_2 250000 // Enable to override BAUDRATE
|
||||
//#define BAUDRATE_2 250000 // :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] Enable to override BAUDRATE
|
||||
|
||||
/**
|
||||
* Select a third serial port on the board to use for communication with the host.
|
||||
|
|
@ -130,7 +131,7 @@
|
|||
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
//#define SERIAL_PORT_3 1
|
||||
//#define BAUDRATE_3 250000 // Enable to override BAUDRATE
|
||||
//#define BAUDRATE_3 250000 // :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] Enable to override BAUDRATE
|
||||
|
||||
// Enable the Bluetooth serial interface on AT90USB devices
|
||||
//#define BLUETOOTH
|
||||
|
|
@ -389,7 +390,7 @@
|
|||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
// @section psu control
|
||||
|
||||
/**
|
||||
* Power Supply Control
|
||||
|
|
@ -625,6 +626,8 @@
|
|||
//============================= PID Settings ================================
|
||||
//===========================================================================
|
||||
|
||||
// @section hotend temp
|
||||
|
||||
// Enable PIDTEMP for PID control or MPCTEMP for Predictive Model.
|
||||
// temperature control. Disable both for bang-bang heating.
|
||||
#define PIDTEMP // See the PID Tuning Guide at https://reprap.org/wiki/PID_Tuning
|
||||
|
|
@ -635,7 +638,8 @@
|
|||
#define PID_K1 0.95 // Smoothing factor within any PID loop
|
||||
|
||||
#if ENABLED(PIDTEMP)
|
||||
//#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders)
|
||||
//#define PID_DEBUG // Print PID debug data to the serial port. Use 'M303 D' to toggle activation.
|
||||
//#define PID_PARAMS_PER_HOTEND // Use separate PID parameters for each extruder (useful for mismatched extruders)
|
||||
// Set/get with G-code: M301 E[extruder number, 0-2]
|
||||
|
||||
#if ENABLED(PID_PARAMS_PER_HOTEND)
|
||||
|
|
@ -663,6 +667,7 @@
|
|||
* Use a physical model of the hotend to control temperature. When configured correctly
|
||||
* this gives better responsiveness and stability than PID and it also removes the need
|
||||
* for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model.
|
||||
* @section mpctemp
|
||||
*/
|
||||
#if ENABLED(MPCTEMP)
|
||||
//#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash)
|
||||
|
|
@ -730,7 +735,7 @@
|
|||
|
||||
#if ENABLED(PIDTEMPBED)
|
||||
//#define MIN_BED_POWER 0
|
||||
//#define PID_BED_DEBUG // Sends debug data to the serial port.
|
||||
//#define PID_BED_DEBUG // Print Bed PID debug data to the serial port.
|
||||
|
||||
// 12v (120 watt?) MK2a PCB Heatbed into 4mm borosilicate (Geeetech Průša i3 Pro, Pro/B/C/X)
|
||||
#define DEFAULT_bedKp 234.88
|
||||
|
|
@ -757,6 +762,7 @@
|
|||
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 200W
|
||||
* heater. If your configuration is significantly different than this and you don't understand
|
||||
* the issues involved, don't use chamber PID until someone else verifies that your hardware works.
|
||||
* @section chamber temp
|
||||
*/
|
||||
//#define PIDTEMPCHAMBER
|
||||
//#define CHAMBER_LIMIT_SWITCHING
|
||||
|
|
@ -771,7 +777,7 @@
|
|||
|
||||
#if ENABLED(PIDTEMPCHAMBER)
|
||||
#define MIN_CHAMBER_POWER 0
|
||||
//#define PID_CHAMBER_DEBUG // Sends debug data to the serial port.
|
||||
//#define PID_CHAMBER_DEBUG // Print Chamber PID debug data to the serial port.
|
||||
|
||||
// Lasko "MyHeat Personal Heater" (200w) modified with a Fotek SSR-10DA to control only the heating element
|
||||
// and placed inside the small Creality printer enclosure tent.
|
||||
|
|
@ -785,7 +791,6 @@
|
|||
#endif // PIDTEMPCHAMBER
|
||||
|
||||
#if ANY(PIDTEMP, PIDTEMPBED, PIDTEMPCHAMBER)
|
||||
//#define PID_DEBUG // Sends debug data to the serial port. Use 'M303 D' to toggle activation.
|
||||
//#define PID_OPENLOOP // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX
|
||||
//#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay
|
||||
#define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature
|
||||
|
|
@ -795,7 +800,7 @@
|
|||
//#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of flash)
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
// @section safety
|
||||
|
||||
/**
|
||||
* Prevent extrusion if the temperature is below EXTRUDE_MINTEMP.
|
||||
|
|
@ -863,6 +868,8 @@
|
|||
#define POLAR_SEGMENTS_PER_SECOND 5
|
||||
#endif
|
||||
|
||||
// @section delta
|
||||
|
||||
// Enable for DELTA kinematics and configure below
|
||||
//#define DELTA
|
||||
#if ENABLED(DELTA)
|
||||
|
|
@ -922,6 +929,8 @@
|
|||
//#define DELTA_DIAGONAL_ROD_TRIM_TOWER { 0.0, 0.0, 0.0 }
|
||||
#endif
|
||||
|
||||
// @section scara
|
||||
|
||||
/**
|
||||
* MORGAN_SCARA was developed by QHARLEY in South Africa in 2012-2013.
|
||||
* Implemented and slightly reworked by JCERNY in June, 2014.
|
||||
|
|
@ -965,6 +974,8 @@
|
|||
|
||||
#endif
|
||||
|
||||
// @section tpara
|
||||
|
||||
// Enable for TPARA kinematics and configure below
|
||||
//#define AXEL_TPARA
|
||||
#if ENABLED(AXEL_TPARA)
|
||||
|
|
@ -991,6 +1002,8 @@
|
|||
#define PSI_HOMING_OFFSET 0
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
|
|
@ -1002,7 +1015,7 @@
|
|||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
||||
// @section homing
|
||||
// @section endstops
|
||||
|
||||
// Specify here all the endstop connectors that are connected to any endstop or probe.
|
||||
// Almost all printers will be using one per axis. Probes will use one or more of the
|
||||
|
|
@ -1672,7 +1685,7 @@
|
|||
//#define V_HOME_DIR -1
|
||||
//#define W_HOME_DIR -1
|
||||
|
||||
// @section machine
|
||||
// @section geometry
|
||||
|
||||
// The size of the printable area
|
||||
#define X_BED_SIZE 200
|
||||
|
|
@ -2132,7 +2145,7 @@
|
|||
//============================= Additional Features ===========================
|
||||
//=============================================================================
|
||||
|
||||
// @section extras
|
||||
// @section eeprom
|
||||
|
||||
/**
|
||||
* EEPROM
|
||||
|
|
@ -2152,6 +2165,8 @@
|
|||
//#define EEPROM_INIT_NOW // Init EEPROM on first boot after a new build.
|
||||
#endif
|
||||
|
||||
// @section host
|
||||
|
||||
//
|
||||
// Host Keepalive
|
||||
//
|
||||
|
|
@ -2162,6 +2177,8 @@
|
|||
#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113.
|
||||
#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating
|
||||
|
||||
// @section units
|
||||
|
||||
//
|
||||
// G20/G21 Inch mode support
|
||||
//
|
||||
|
|
@ -2189,6 +2206,8 @@
|
|||
#define PREHEAT_2_TEMP_CHAMBER 35
|
||||
#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
|
||||
|
||||
// @section motion
|
||||
|
||||
/**
|
||||
* Nozzle Park
|
||||
*
|
||||
|
|
@ -2287,6 +2306,8 @@
|
|||
|
||||
#endif
|
||||
|
||||
// @section host
|
||||
|
||||
/**
|
||||
* Print Job Timer
|
||||
*
|
||||
|
|
@ -2313,6 +2334,8 @@
|
|||
*/
|
||||
#define PRINTJOB_TIMER_AUTOSTART
|
||||
|
||||
// @section stats
|
||||
|
||||
/**
|
||||
* Print Counter
|
||||
*
|
||||
|
|
@ -2330,6 +2353,8 @@
|
|||
#define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print
|
||||
#endif
|
||||
|
||||
// @section security
|
||||
|
||||
/**
|
||||
* Password
|
||||
*
|
||||
|
|
@ -2365,7 +2390,7 @@
|
|||
//============================= LCD and SD support ============================
|
||||
//=============================================================================
|
||||
|
||||
// @section lcd
|
||||
// @section interface
|
||||
|
||||
/**
|
||||
* LCD LANGUAGE
|
||||
|
|
@ -2521,6 +2546,7 @@
|
|||
//======================== LCD / Controller Selection =========================
|
||||
//======================== (Character-based LCDs) =========================
|
||||
//=============================================================================
|
||||
// @section lcd
|
||||
|
||||
//
|
||||
// RepRapDiscount Smart Controller.
|
||||
|
|
@ -3166,7 +3192,7 @@
|
|||
//=============================== Extra Features ==============================
|
||||
//=============================================================================
|
||||
|
||||
// @section extras
|
||||
// @section fans
|
||||
|
||||
// Set number of user-controlled fans. Disable to use all board-defined fans.
|
||||
// :[1,2,3,4,5,6,7,8]
|
||||
|
|
@ -3190,14 +3216,18 @@
|
|||
// duty cycle is attained.
|
||||
//#define SOFT_PWM_DITHER
|
||||
|
||||
// @section extras
|
||||
|
||||
// Support for the BariCUDA Paste Extruder
|
||||
//#define BARICUDA
|
||||
|
||||
// @section lights
|
||||
|
||||
// Temperature status LEDs that display the hotend and bed temperature.
|
||||
// If all hotends, bed temperature, and target temperature are under 54C
|
||||
// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis)
|
||||
//#define TEMP_STAT_LEDS
|
||||
|
||||
// Support for the BariCUDA Paste Extruder
|
||||
//#define BARICUDA
|
||||
|
||||
// Support for BlinkM/CyzRgb
|
||||
//#define BLINKM
|
||||
|
||||
|
|
@ -3283,6 +3313,8 @@
|
|||
#define PRINTER_EVENT_LEDS
|
||||
#endif
|
||||
|
||||
// @section servos
|
||||
|
||||
/**
|
||||
* Number of servos
|
||||
*
|
||||
|
|
|
|||
|
|
@ -114,6 +114,7 @@
|
|||
* :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
|
||||
*/
|
||||
#define BAUDRATE 250000
|
||||
|
||||
//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate
|
||||
|
||||
/**
|
||||
|
|
@ -122,7 +123,7 @@
|
|||
* :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
//#define SERIAL_PORT_2 -1
|
||||
//#define BAUDRATE_2 250000 // Enable to override BAUDRATE
|
||||
//#define BAUDRATE_2 250000 // :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] Enable to override BAUDRATE
|
||||
|
||||
/**
|
||||
* Select a third serial port on the board to use for communication with the host.
|
||||
|
|
@ -130,7 +131,7 @@
|
|||
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
//#define SERIAL_PORT_3 1
|
||||
//#define BAUDRATE_3 250000 // Enable to override BAUDRATE
|
||||
//#define BAUDRATE_3 250000 // :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] Enable to override BAUDRATE
|
||||
|
||||
// Enable the Bluetooth serial interface on AT90USB devices
|
||||
//#define BLUETOOTH
|
||||
|
|
@ -389,7 +390,7 @@
|
|||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
// @section psu control
|
||||
|
||||
/**
|
||||
* Power Supply Control
|
||||
|
|
@ -625,6 +626,8 @@
|
|||
//============================= PID Settings ================================
|
||||
//===========================================================================
|
||||
|
||||
// @section hotend temp
|
||||
|
||||
// Enable PIDTEMP for PID control or MPCTEMP for Predictive Model.
|
||||
// temperature control. Disable both for bang-bang heating.
|
||||
#define PIDTEMP // See the PID Tuning Guide at https://reprap.org/wiki/PID_Tuning
|
||||
|
|
@ -635,7 +638,8 @@
|
|||
#define PID_K1 0.95 // Smoothing factor within any PID loop
|
||||
|
||||
#if ENABLED(PIDTEMP)
|
||||
//#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders)
|
||||
//#define PID_DEBUG // Print PID debug data to the serial port. Use 'M303 D' to toggle activation.
|
||||
//#define PID_PARAMS_PER_HOTEND // Use separate PID parameters for each extruder (useful for mismatched extruders)
|
||||
// Set/get with G-code: M301 E[extruder number, 0-2]
|
||||
|
||||
#if ENABLED(PID_PARAMS_PER_HOTEND)
|
||||
|
|
@ -657,6 +661,7 @@
|
|||
* Use a physical model of the hotend to control temperature. When configured correctly
|
||||
* this gives better responsiveness and stability than PID and it also removes the need
|
||||
* for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model.
|
||||
* @section mpctemp
|
||||
*/
|
||||
#if ENABLED(MPCTEMP)
|
||||
//#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash)
|
||||
|
|
@ -724,7 +729,7 @@
|
|||
|
||||
#if ENABLED(PIDTEMPBED)
|
||||
//#define MIN_BED_POWER 0
|
||||
//#define PID_BED_DEBUG // Sends debug data to the serial port.
|
||||
//#define PID_BED_DEBUG // Print Bed PID debug data to the serial port.
|
||||
|
||||
// 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
|
||||
// from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
|
||||
|
|
@ -752,6 +757,7 @@
|
|||
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 200W
|
||||
* heater. If your configuration is significantly different than this and you don't understand
|
||||
* the issues involved, don't use chamber PID until someone else verifies that your hardware works.
|
||||
* @section chamber temp
|
||||
*/
|
||||
//#define PIDTEMPCHAMBER
|
||||
//#define CHAMBER_LIMIT_SWITCHING
|
||||
|
|
@ -766,7 +772,7 @@
|
|||
|
||||
#if ENABLED(PIDTEMPCHAMBER)
|
||||
#define MIN_CHAMBER_POWER 0
|
||||
//#define PID_CHAMBER_DEBUG // Sends debug data to the serial port.
|
||||
//#define PID_CHAMBER_DEBUG // Print Chamber PID debug data to the serial port.
|
||||
|
||||
// Lasko "MyHeat Personal Heater" (200w) modified with a Fotek SSR-10DA to control only the heating element
|
||||
// and placed inside the small Creality printer enclosure tent.
|
||||
|
|
@ -780,7 +786,6 @@
|
|||
#endif // PIDTEMPCHAMBER
|
||||
|
||||
#if ANY(PIDTEMP, PIDTEMPBED, PIDTEMPCHAMBER)
|
||||
//#define PID_DEBUG // Sends debug data to the serial port. Use 'M303 D' to toggle activation.
|
||||
//#define PID_OPENLOOP // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX
|
||||
//#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay
|
||||
#define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature
|
||||
|
|
@ -790,7 +795,7 @@
|
|||
//#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of flash)
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
// @section safety
|
||||
|
||||
/**
|
||||
* Prevent extrusion if the temperature is below EXTRUDE_MINTEMP.
|
||||
|
|
@ -858,6 +863,8 @@
|
|||
#define POLAR_SEGMENTS_PER_SECOND 5
|
||||
#endif
|
||||
|
||||
// @section delta
|
||||
|
||||
// Enable for DELTA kinematics and configure below
|
||||
//#define DELTA
|
||||
#if ENABLED(DELTA)
|
||||
|
|
@ -917,6 +924,8 @@
|
|||
//#define DELTA_DIAGONAL_ROD_TRIM_TOWER { 0.0, 0.0, 0.0 }
|
||||
#endif
|
||||
|
||||
// @section scara
|
||||
|
||||
/**
|
||||
* MORGAN_SCARA was developed by QHARLEY in South Africa in 2012-2013.
|
||||
* Implemented and slightly reworked by JCERNY in June, 2014.
|
||||
|
|
@ -960,6 +969,8 @@
|
|||
|
||||
#endif
|
||||
|
||||
// @section tpara
|
||||
|
||||
// Enable for TPARA kinematics and configure below
|
||||
//#define AXEL_TPARA
|
||||
#if ENABLED(AXEL_TPARA)
|
||||
|
|
@ -986,6 +997,8 @@
|
|||
#define PSI_HOMING_OFFSET 0
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
|
|
@ -997,7 +1010,7 @@
|
|||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
||||
// @section homing
|
||||
// @section endstops
|
||||
|
||||
// Specify here all the endstop connectors that are connected to any endstop or probe.
|
||||
// Almost all printers will be using one per axis. Probes will use one or more of the
|
||||
|
|
@ -1667,7 +1680,7 @@
|
|||
//#define V_HOME_DIR -1
|
||||
//#define W_HOME_DIR -1
|
||||
|
||||
// @section machine
|
||||
// @section geometry
|
||||
|
||||
// The size of the printable area
|
||||
#define X_BED_SIZE 205
|
||||
|
|
@ -2127,7 +2140,7 @@
|
|||
//============================= Additional Features ===========================
|
||||
//=============================================================================
|
||||
|
||||
// @section extras
|
||||
// @section eeprom
|
||||
|
||||
/**
|
||||
* EEPROM
|
||||
|
|
@ -2147,6 +2160,8 @@
|
|||
//#define EEPROM_INIT_NOW // Init EEPROM on first boot after a new build.
|
||||
#endif
|
||||
|
||||
// @section host
|
||||
|
||||
//
|
||||
// Host Keepalive
|
||||
//
|
||||
|
|
@ -2157,6 +2172,8 @@
|
|||
#define DEFAULT_KEEPALIVE_INTERVAL 4 // Number of seconds between "busy" messages. Set with M113.
|
||||
#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating
|
||||
|
||||
// @section units
|
||||
|
||||
//
|
||||
// G20/G21 Inch mode support
|
||||
//
|
||||
|
|
@ -2184,6 +2201,8 @@
|
|||
#define PREHEAT_2_TEMP_CHAMBER 35
|
||||
#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
|
||||
|
||||
// @section motion
|
||||
|
||||
/**
|
||||
* Nozzle Park
|
||||
*
|
||||
|
|
@ -2282,6 +2301,8 @@
|
|||
|
||||
#endif
|
||||
|
||||
// @section host
|
||||
|
||||
/**
|
||||
* Print Job Timer
|
||||
*
|
||||
|
|
@ -2308,6 +2329,8 @@
|
|||
*/
|
||||
#define PRINTJOB_TIMER_AUTOSTART
|
||||
|
||||
// @section stats
|
||||
|
||||
/**
|
||||
* Print Counter
|
||||
*
|
||||
|
|
@ -2325,6 +2348,8 @@
|
|||
#define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print
|
||||
#endif
|
||||
|
||||
// @section security
|
||||
|
||||
/**
|
||||
* Password
|
||||
*
|
||||
|
|
@ -2360,7 +2385,7 @@
|
|||
//============================= LCD and SD support ============================
|
||||
//=============================================================================
|
||||
|
||||
// @section lcd
|
||||
// @section interface
|
||||
|
||||
/**
|
||||
* LCD LANGUAGE
|
||||
|
|
@ -2516,6 +2541,7 @@
|
|||
//======================== LCD / Controller Selection =========================
|
||||
//======================== (Character-based LCDs) =========================
|
||||
//=============================================================================
|
||||
// @section lcd
|
||||
|
||||
//
|
||||
// RepRapDiscount Smart Controller.
|
||||
|
|
@ -3161,7 +3187,7 @@
|
|||
//=============================== Extra Features ==============================
|
||||
//=============================================================================
|
||||
|
||||
// @section extras
|
||||
// @section fans
|
||||
|
||||
// Set number of user-controlled fans. Disable to use all board-defined fans.
|
||||
// :[1,2,3,4,5,6,7,8]
|
||||
|
|
@ -3185,14 +3211,18 @@
|
|||
// duty cycle is attained.
|
||||
//#define SOFT_PWM_DITHER
|
||||
|
||||
// @section extras
|
||||
|
||||
// Support for the BariCUDA Paste Extruder
|
||||
//#define BARICUDA
|
||||
|
||||
// @section lights
|
||||
|
||||
// Temperature status LEDs that display the hotend and bed temperature.
|
||||
// If all hotends, bed temperature, and target temperature are under 54C
|
||||
// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis)
|
||||
//#define TEMP_STAT_LEDS
|
||||
|
||||
// Support for the BariCUDA Paste Extruder
|
||||
//#define BARICUDA
|
||||
|
||||
// Support for BlinkM/CyzRgb
|
||||
//#define BLINKM
|
||||
|
||||
|
|
@ -3278,6 +3308,8 @@
|
|||
#define PRINTER_EVENT_LEDS
|
||||
#endif
|
||||
|
||||
// @section servos
|
||||
|
||||
/**
|
||||
* Number of servos
|
||||
*
|
||||
|
|
|
|||
|
|
@ -114,6 +114,7 @@
|
|||
* :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
|
||||
*/
|
||||
#define BAUDRATE 250000
|
||||
|
||||
//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate
|
||||
|
||||
/**
|
||||
|
|
@ -122,7 +123,7 @@
|
|||
* :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
//#define SERIAL_PORT_2 -1
|
||||
//#define BAUDRATE_2 250000 // Enable to override BAUDRATE
|
||||
//#define BAUDRATE_2 250000 // :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] Enable to override BAUDRATE
|
||||
|
||||
/**
|
||||
* Select a third serial port on the board to use for communication with the host.
|
||||
|
|
@ -130,7 +131,7 @@
|
|||
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
//#define SERIAL_PORT_3 1
|
||||
//#define BAUDRATE_3 250000 // Enable to override BAUDRATE
|
||||
//#define BAUDRATE_3 250000 // :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] Enable to override BAUDRATE
|
||||
|
||||
// Enable the Bluetooth serial interface on AT90USB devices
|
||||
//#define BLUETOOTH
|
||||
|
|
@ -389,7 +390,7 @@
|
|||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
// @section psu control
|
||||
|
||||
/**
|
||||
* Power Supply Control
|
||||
|
|
@ -625,6 +626,8 @@
|
|||
//============================= PID Settings ================================
|
||||
//===========================================================================
|
||||
|
||||
// @section hotend temp
|
||||
|
||||
// Enable PIDTEMP for PID control or MPCTEMP for Predictive Model.
|
||||
// temperature control. Disable both for bang-bang heating.
|
||||
#define PIDTEMP // See the PID Tuning Guide at https://reprap.org/wiki/PID_Tuning
|
||||
|
|
@ -635,7 +638,8 @@
|
|||
#define PID_K1 0.95 // Smoothing factor within any PID loop
|
||||
|
||||
#if ENABLED(PIDTEMP)
|
||||
//#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders)
|
||||
//#define PID_DEBUG // Print PID debug data to the serial port. Use 'M303 D' to toggle activation.
|
||||
//#define PID_PARAMS_PER_HOTEND // Use separate PID parameters for each extruder (useful for mismatched extruders)
|
||||
// Set/get with G-code: M301 E[extruder number, 0-2]
|
||||
|
||||
#if ENABLED(PID_PARAMS_PER_HOTEND)
|
||||
|
|
@ -657,6 +661,7 @@
|
|||
* Use a physical model of the hotend to control temperature. When configured correctly
|
||||
* this gives better responsiveness and stability than PID and it also removes the need
|
||||
* for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model.
|
||||
* @section mpctemp
|
||||
*/
|
||||
#if ENABLED(MPCTEMP)
|
||||
//#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash)
|
||||
|
|
@ -724,7 +729,7 @@
|
|||
|
||||
#if ENABLED(PIDTEMPBED)
|
||||
//#define MIN_BED_POWER 0
|
||||
//#define PID_BED_DEBUG // Sends debug data to the serial port.
|
||||
//#define PID_BED_DEBUG // Print Bed PID debug data to the serial port.
|
||||
|
||||
#define DEFAULT_bedKp 10.00
|
||||
#define DEFAULT_bedKi .023
|
||||
|
|
@ -750,6 +755,7 @@
|
|||
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 200W
|
||||
* heater. If your configuration is significantly different than this and you don't understand
|
||||
* the issues involved, don't use chamber PID until someone else verifies that your hardware works.
|
||||
* @section chamber temp
|
||||
*/
|
||||
//#define PIDTEMPCHAMBER
|
||||
//#define CHAMBER_LIMIT_SWITCHING
|
||||
|
|
@ -764,7 +770,7 @@
|
|||
|
||||
#if ENABLED(PIDTEMPCHAMBER)
|
||||
#define MIN_CHAMBER_POWER 0
|
||||
//#define PID_CHAMBER_DEBUG // Sends debug data to the serial port.
|
||||
//#define PID_CHAMBER_DEBUG // Print Chamber PID debug data to the serial port.
|
||||
|
||||
// Lasko "MyHeat Personal Heater" (200w) modified with a Fotek SSR-10DA to control only the heating element
|
||||
// and placed inside the small Creality printer enclosure tent.
|
||||
|
|
@ -778,7 +784,6 @@
|
|||
#endif // PIDTEMPCHAMBER
|
||||
|
||||
#if ANY(PIDTEMP, PIDTEMPBED, PIDTEMPCHAMBER)
|
||||
//#define PID_DEBUG // Sends debug data to the serial port. Use 'M303 D' to toggle activation.
|
||||
//#define PID_OPENLOOP // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX
|
||||
//#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay
|
||||
#define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature
|
||||
|
|
@ -788,7 +793,7 @@
|
|||
//#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of flash)
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
// @section safety
|
||||
|
||||
/**
|
||||
* Prevent extrusion if the temperature is below EXTRUDE_MINTEMP.
|
||||
|
|
@ -856,6 +861,8 @@
|
|||
#define POLAR_SEGMENTS_PER_SECOND 5
|
||||
#endif
|
||||
|
||||
// @section delta
|
||||
|
||||
// Enable for DELTA kinematics and configure below
|
||||
//#define DELTA
|
||||
#if ENABLED(DELTA)
|
||||
|
|
@ -915,6 +922,8 @@
|
|||
//#define DELTA_DIAGONAL_ROD_TRIM_TOWER { 0.0, 0.0, 0.0 }
|
||||
#endif
|
||||
|
||||
// @section scara
|
||||
|
||||
/**
|
||||
* MORGAN_SCARA was developed by QHARLEY in South Africa in 2012-2013.
|
||||
* Implemented and slightly reworked by JCERNY in June, 2014.
|
||||
|
|
@ -958,6 +967,8 @@
|
|||
|
||||
#endif
|
||||
|
||||
// @section tpara
|
||||
|
||||
// Enable for TPARA kinematics and configure below
|
||||
//#define AXEL_TPARA
|
||||
#if ENABLED(AXEL_TPARA)
|
||||
|
|
@ -984,6 +995,8 @@
|
|||
#define PSI_HOMING_OFFSET 0
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
|
|
@ -995,7 +1008,7 @@
|
|||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
||||
// @section homing
|
||||
// @section endstops
|
||||
|
||||
// Specify here all the endstop connectors that are connected to any endstop or probe.
|
||||
// Almost all printers will be using one per axis. Probes will use one or more of the
|
||||
|
|
@ -1665,7 +1678,7 @@
|
|||
//#define V_HOME_DIR -1
|
||||
//#define W_HOME_DIR -1
|
||||
|
||||
// @section machine
|
||||
// @section geometry
|
||||
|
||||
// The size of the printable area
|
||||
#define X_BED_SIZE 280
|
||||
|
|
@ -2126,7 +2139,7 @@
|
|||
//============================= Additional Features ===========================
|
||||
//=============================================================================
|
||||
|
||||
// @section extras
|
||||
// @section eeprom
|
||||
|
||||
/**
|
||||
* EEPROM
|
||||
|
|
@ -2146,6 +2159,8 @@
|
|||
//#define EEPROM_INIT_NOW // Init EEPROM on first boot after a new build.
|
||||
#endif
|
||||
|
||||
// @section host
|
||||
|
||||
//
|
||||
// Host Keepalive
|
||||
//
|
||||
|
|
@ -2156,6 +2171,8 @@
|
|||
#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113.
|
||||
#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating
|
||||
|
||||
// @section units
|
||||
|
||||
//
|
||||
// G20/G21 Inch mode support
|
||||
//
|
||||
|
|
@ -2183,6 +2200,8 @@
|
|||
#define PREHEAT_2_TEMP_CHAMBER 35
|
||||
#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
|
||||
|
||||
// @section motion
|
||||
|
||||
/**
|
||||
* Nozzle Park
|
||||
*
|
||||
|
|
@ -2281,6 +2300,8 @@
|
|||
|
||||
#endif
|
||||
|
||||
// @section host
|
||||
|
||||
/**
|
||||
* Print Job Timer
|
||||
*
|
||||
|
|
@ -2307,6 +2328,8 @@
|
|||
*/
|
||||
#define PRINTJOB_TIMER_AUTOSTART
|
||||
|
||||
// @section stats
|
||||
|
||||
/**
|
||||
* Print Counter
|
||||
*
|
||||
|
|
@ -2324,6 +2347,8 @@
|
|||
#define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print
|
||||
#endif
|
||||
|
||||
// @section security
|
||||
|
||||
/**
|
||||
* Password
|
||||
*
|
||||
|
|
@ -2359,7 +2384,7 @@
|
|||
//============================= LCD and SD support ============================
|
||||
//=============================================================================
|
||||
|
||||
// @section lcd
|
||||
// @section interface
|
||||
|
||||
/**
|
||||
* LCD LANGUAGE
|
||||
|
|
@ -2516,6 +2541,7 @@
|
|||
//======================== LCD / Controller Selection =========================
|
||||
//======================== (Character-based LCDs) =========================
|
||||
//=============================================================================
|
||||
// @section lcd
|
||||
|
||||
//
|
||||
// RepRapDiscount Smart Controller.
|
||||
|
|
@ -3164,7 +3190,7 @@
|
|||
//=============================== Extra Features ==============================
|
||||
//=============================================================================
|
||||
|
||||
// @section extras
|
||||
// @section fans
|
||||
|
||||
// Set number of user-controlled fans. Disable to use all board-defined fans.
|
||||
// :[1,2,3,4,5,6,7,8]
|
||||
|
|
@ -3188,14 +3214,18 @@
|
|||
// duty cycle is attained.
|
||||
//#define SOFT_PWM_DITHER
|
||||
|
||||
// @section extras
|
||||
|
||||
// Support for the BariCUDA Paste Extruder
|
||||
//#define BARICUDA
|
||||
|
||||
// @section lights
|
||||
|
||||
// Temperature status LEDs that display the hotend and bed temperature.
|
||||
// If all hotends, bed temperature, and target temperature are under 54C
|
||||
// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis)
|
||||
//#define TEMP_STAT_LEDS
|
||||
|
||||
// Support for the BariCUDA Paste Extruder
|
||||
//#define BARICUDA
|
||||
|
||||
// Support for BlinkM/CyzRgb
|
||||
//#define BLINKM
|
||||
|
||||
|
|
@ -3281,6 +3311,8 @@
|
|||
#define PRINTER_EVENT_LEDS
|
||||
#endif
|
||||
|
||||
// @section servos
|
||||
|
||||
/**
|
||||
* Number of servos
|
||||
*
|
||||
|
|
|
|||
|
|
@ -32,6 +32,24 @@
|
|||
*/
|
||||
#define CONFIGURATION_ADV_H_VERSION 02010100
|
||||
|
||||
// @section develop
|
||||
|
||||
/**
|
||||
* Configuration Dump to JSON and INI format
|
||||
*
|
||||
* Dump the configuration as part of the build. (See signature.py)
|
||||
* Output files are saved with the build (e.g., .pio/build/mega2560).
|
||||
*
|
||||
* See `build_all_examples --ini` as an example of config.ini archiving.
|
||||
*
|
||||
* 1 = marlin_config.json - Dictionary containing the configuration.
|
||||
* This file is also generated for CONFIGURATION_EMBEDDING.
|
||||
* 2 = config.ini - File format for PlatformIO preprocessing.
|
||||
* 3 = schema.json - The entire configuration schema. (13 = pattern groups)
|
||||
* 4 = schema.yml - The entire configuration schema.
|
||||
*/
|
||||
//#define CONFIG_DUMP // :[1:'JSON', 2:'config.ini', 3:'schema.json', 4:'schema.yml']
|
||||
|
||||
//===========================================================================
|
||||
//============================= Thermal Settings ============================
|
||||
//===========================================================================
|
||||
|
|
@ -2558,6 +2576,8 @@
|
|||
#endif
|
||||
#endif // HAS_MULTI_EXTRUDER
|
||||
|
||||
// @section advanced pause
|
||||
|
||||
/**
|
||||
* Advanced Pause for Filament Change
|
||||
* - Adds the G-code M600 Filament Change to initiate a filament change.
|
||||
|
|
@ -2616,13 +2636,12 @@
|
|||
#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
|
||||
#endif
|
||||
|
||||
// @section tmc
|
||||
|
||||
/**
|
||||
* TMC26X Stepper Driver options
|
||||
*
|
||||
* The TMC26XStepper library is required for this stepper driver.
|
||||
* https://github.com/trinamic/TMC26XStepper
|
||||
* @section tmc/tmc26x
|
||||
*/
|
||||
#if HAS_DRIVER(TMC26X)
|
||||
|
||||
|
|
@ -2760,8 +2779,6 @@
|
|||
|
||||
#endif // TMC26X
|
||||
|
||||
// @section tmc_smart
|
||||
|
||||
/**
|
||||
* To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode
|
||||
* connect your SPI pins to the hardware SPI interface on your board and define
|
||||
|
|
@ -2777,6 +2794,7 @@
|
|||
*
|
||||
* TMCStepper library is required to use TMC stepper drivers.
|
||||
* https://github.com/teemuatlut/TMCStepper
|
||||
* @section tmc/config
|
||||
*/
|
||||
#if HAS_TRINAMIC_CONFIG
|
||||
|
||||
|
|
@ -3000,6 +3018,8 @@
|
|||
//#define E7_HOLD_MULTIPLIER 0.5
|
||||
#endif
|
||||
|
||||
// @section tmc/spi
|
||||
|
||||
/**
|
||||
* Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here.
|
||||
* The default pins can be found in your board's pins file.
|
||||
|
|
@ -3037,6 +3057,8 @@
|
|||
//#define TMC_SW_MISO -1
|
||||
//#define TMC_SW_SCK -1
|
||||
|
||||
// @section tmc/serial
|
||||
|
||||
/**
|
||||
* Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
|
||||
* Set the address using jumpers on pins MS1 and MS2.
|
||||
|
|
@ -3072,6 +3094,8 @@
|
|||
//#define E6_SLAVE_ADDRESS 0
|
||||
//#define E7_SLAVE_ADDRESS 0
|
||||
|
||||
// @section tmc/smart
|
||||
|
||||
/**
|
||||
* Software enable
|
||||
*
|
||||
|
|
@ -3080,6 +3104,8 @@
|
|||
*/
|
||||
//#define SOFTWARE_DRIVER_ENABLE
|
||||
|
||||
// @section tmc/stealthchop
|
||||
|
||||
/**
|
||||
* TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only
|
||||
* Use Trinamic's ultra quiet stepping mode.
|
||||
|
|
@ -3134,6 +3160,8 @@
|
|||
//#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
|
||||
//#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
|
||||
|
||||
// @section tmc/status
|
||||
|
||||
/**
|
||||
* Monitor Trinamic drivers
|
||||
* for error conditions like overtemperature and short to ground.
|
||||
|
|
@ -3153,6 +3181,8 @@
|
|||
#define STOP_ON_ERROR
|
||||
#endif
|
||||
|
||||
// @section tmc/hybrid
|
||||
|
||||
/**
|
||||
* TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only
|
||||
* The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD.
|
||||
|
|
@ -3209,6 +3239,7 @@
|
|||
* homing and adds a guard period for endstop triggering.
|
||||
*
|
||||
* Comment *_STALL_SENSITIVITY to disable sensorless homing for that axis.
|
||||
* @section tmc/stallguard
|
||||
*/
|
||||
//#define SENSORLESS_HOMING // StallGuard capable drivers only
|
||||
|
||||
|
|
@ -3232,6 +3263,8 @@
|
|||
//#define IMPROVE_HOMING_RELIABILITY
|
||||
#endif
|
||||
|
||||
// @section tmc/config
|
||||
|
||||
/**
|
||||
* TMC Homing stepper phase.
|
||||
*
|
||||
|
|
@ -3312,7 +3345,7 @@
|
|||
#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave
|
||||
#endif
|
||||
|
||||
// @section extras
|
||||
// @section photo
|
||||
|
||||
/**
|
||||
* Photo G-code
|
||||
|
|
@ -3355,6 +3388,8 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
// @section cnc
|
||||
|
||||
/**
|
||||
* Spindle & Laser control
|
||||
*
|
||||
|
|
@ -3559,6 +3594,8 @@
|
|||
#define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
|
||||
#endif
|
||||
|
||||
// @section filament width
|
||||
|
||||
/**
|
||||
* Filament Width Sensor
|
||||
*
|
||||
|
|
@ -3592,6 +3629,8 @@
|
|||
//#define FILAMENT_LCD_DISPLAY
|
||||
#endif
|
||||
|
||||
// @section power
|
||||
|
||||
/**
|
||||
* Power Monitor
|
||||
* Monitor voltage (V) and/or current (A), and -when possible- power (W)
|
||||
|
|
@ -3615,6 +3654,8 @@
|
|||
#define POWER_MONITOR_VOLTAGE_OFFSET 0 // Offset (in volts) applied to the calculated voltage
|
||||
#endif
|
||||
|
||||
// @section safety
|
||||
|
||||
/**
|
||||
* Stepper Driver Anti-SNAFU Protection
|
||||
*
|
||||
|
|
@ -3624,6 +3665,8 @@
|
|||
*/
|
||||
//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
|
||||
|
||||
// @section cnc
|
||||
|
||||
/**
|
||||
* CNC Coordinate Systems
|
||||
*
|
||||
|
|
@ -3640,6 +3683,8 @@
|
|||
*/
|
||||
//#define CNC_DRILLING_CYCLE
|
||||
|
||||
// @section reporting
|
||||
|
||||
/**
|
||||
* Auto-report fan speed with M123 S<seconds>
|
||||
* Requires fans with tachometer pins
|
||||
|
|
@ -3667,6 +3712,8 @@
|
|||
//#define M115_GEOMETRY_REPORT
|
||||
#endif
|
||||
|
||||
// @section security
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
|
|
@ -3674,6 +3721,8 @@
|
|||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
// @section volumetrics
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
|
|
@ -3702,14 +3751,7 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Enable this option for a leaner build of Marlin that removes all
|
||||
* workspace offsets, simplifying coordinate transformations, leveling, etc.
|
||||
*
|
||||
* - M206 and M428 are disabled.
|
||||
* - G92 will revert to its behavior from Marlin 1.0.
|
||||
*/
|
||||
//#define NO_WORKSPACE_OFFSETS
|
||||
// @section reporting
|
||||
|
||||
// Extra options for the M114 "Current Position" report
|
||||
//#define M114_DETAIL // Use 'M114` for details to check planner calculations
|
||||
|
|
@ -3718,6 +3760,8 @@
|
|||
|
||||
//#define REPORT_FAN_CHANGE // Report the new fan speed when changed by M106 (and others)
|
||||
|
||||
// @section gcode
|
||||
|
||||
/**
|
||||
* Spend 28 bytes of SRAM to optimize the G-code parser
|
||||
*/
|
||||
|
|
@ -3735,6 +3779,15 @@
|
|||
|
||||
//#define REPETIER_GCODE_M360 // Add commands originally from Repetier FW
|
||||
|
||||
/**
|
||||
* Enable this option for a leaner build of Marlin that removes all
|
||||
* workspace offsets, simplifying coordinate transformations, leveling, etc.
|
||||
*
|
||||
* - M206 and M428 are disabled.
|
||||
* - G92 will revert to its behavior from Marlin 1.0.
|
||||
*/
|
||||
//#define NO_WORKSPACE_OFFSETS
|
||||
|
||||
/**
|
||||
* CNC G-code options
|
||||
* Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.
|
||||
|
|
@ -3751,6 +3804,8 @@
|
|||
#endif
|
||||
//#define G0_ANGULAR_FEEDRATE 2700 // (°/min)
|
||||
|
||||
// @section gcode
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
|
|
@ -3775,6 +3830,8 @@
|
|||
* Up to 25 may be defined, but the actual number is LCD-dependent.
|
||||
*/
|
||||
|
||||
// @section custom main menu
|
||||
|
||||
// Custom Menu: Main Menu
|
||||
//#define CUSTOM_MENU_MAIN
|
||||
#if ENABLED(CUSTOM_MENU_MAIN)
|
||||
|
|
@ -3805,6 +3862,8 @@
|
|||
//#define MAIN_MENU_ITEM_5_CONFIRM
|
||||
#endif
|
||||
|
||||
// @section custom config menu
|
||||
|
||||
// Custom Menu: Configuration Menu
|
||||
//#define CUSTOM_MENU_CONFIG
|
||||
#if ENABLED(CUSTOM_MENU_CONFIG)
|
||||
|
|
@ -3835,6 +3894,8 @@
|
|||
//#define CONFIG_MENU_ITEM_5_CONFIRM
|
||||
#endif
|
||||
|
||||
// @section custom buttons
|
||||
|
||||
/**
|
||||
* User-defined buttons to run custom G-code.
|
||||
* Up to 25 may be defined.
|
||||
|
|
@ -3866,6 +3927,8 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
// @section host
|
||||
|
||||
/**
|
||||
* Host Action Commands
|
||||
*
|
||||
|
|
@ -3891,6 +3954,8 @@
|
|||
//#define HOST_SHUTDOWN_MENU_ITEM // Add a menu item that tells the host to shut down
|
||||
#endif
|
||||
|
||||
// @section extras
|
||||
|
||||
/**
|
||||
* Cancel Objects
|
||||
*
|
||||
|
|
@ -3912,6 +3977,7 @@
|
|||
* Alternative Supplier: https://reliabuild3d.com/
|
||||
*
|
||||
* Reliabuild encoders have been modified to improve reliability.
|
||||
* @section i2c encoders
|
||||
*/
|
||||
|
||||
//#define I2C_POSITION_ENCODERS
|
||||
|
|
@ -3983,6 +4049,7 @@
|
|||
|
||||
/**
|
||||
* Analog Joystick(s)
|
||||
* @section joystick
|
||||
*/
|
||||
//#define JOYSTICK
|
||||
#if ENABLED(JOYSTICK)
|
||||
|
|
@ -4007,6 +4074,7 @@
|
|||
* Modern replacement for the Prusa TMC_Z_CALIBRATION.
|
||||
* Adds capability to work with any adjustable current drivers.
|
||||
* Implemented as G34 because M915 is deprecated.
|
||||
* @section calibrate
|
||||
*/
|
||||
//#define MECHANICAL_GANTRY_CALIBRATION
|
||||
#if ENABLED(MECHANICAL_GANTRY_CALIBRATION)
|
||||
|
|
@ -4024,6 +4092,7 @@
|
|||
/**
|
||||
* Instant freeze / unfreeze functionality
|
||||
* Potentially useful for emergency stop that allows being resumed.
|
||||
* @section interface
|
||||
*/
|
||||
//#define FREEZE_FEATURE
|
||||
#if ENABLED(FREEZE_FEATURE)
|
||||
|
|
@ -4036,6 +4105,7 @@
|
|||
*
|
||||
* Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display.
|
||||
* Requires 3 signal wires. Some useful debug options are included to demonstrate its usage.
|
||||
* @section debug matrix
|
||||
*/
|
||||
//#define MAX7219_DEBUG
|
||||
#if ENABLED(MAX7219_DEBUG)
|
||||
|
|
@ -4074,6 +4144,7 @@
|
|||
* Support for Synchronized Z moves when used with NanoDLP. G0/G1 axis moves will
|
||||
* output a "Z_move_comp" string to enable synchronization with DLP projector exposure.
|
||||
* This feature allows you to use [[WaitForDoneMessage]] instead of M400 commands.
|
||||
* @section nanodlp
|
||||
*/
|
||||
//#define NANODLP_Z_SYNC
|
||||
#if ENABLED(NANODLP_Z_SYNC)
|
||||
|
|
@ -4082,6 +4153,7 @@
|
|||
|
||||
/**
|
||||
* Ethernet. Use M552 to enable and set the IP address.
|
||||
* @section network
|
||||
*/
|
||||
#if HAS_ETHERNET
|
||||
#define MAC_ADDRESS { 0xDE, 0xAD, 0xBE, 0xEF, 0xF0, 0x0D } // A MAC address unique to your network
|
||||
|
|
@ -4109,6 +4181,8 @@
|
|||
//#include "Configuration_Secure.h" // External file with WiFi SSID / Password
|
||||
#endif
|
||||
|
||||
// @section multi-material
|
||||
|
||||
/**
|
||||
* Průša Multi-Material Unit (MMU)
|
||||
* Enable in Configuration.h
|
||||
|
|
@ -4216,6 +4290,7 @@
|
|||
|
||||
/**
|
||||
* Advanced Print Counter settings
|
||||
* @section stats
|
||||
*/
|
||||
#if ENABLED(PRINTCOUNTER)
|
||||
#define SERVICE_WARNING_BUZZES 3
|
||||
|
|
|
|||
|
|
@ -114,6 +114,7 @@
|
|||
* :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
|
||||
*/
|
||||
#define BAUDRATE 250000
|
||||
|
||||
//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate
|
||||
|
||||
/**
|
||||
|
|
@ -122,7 +123,7 @@
|
|||
* :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
//#define SERIAL_PORT_2 -1
|
||||
//#define BAUDRATE_2 250000 // Enable to override BAUDRATE
|
||||
//#define BAUDRATE_2 250000 // :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] Enable to override BAUDRATE
|
||||
|
||||
/**
|
||||
* Select a third serial port on the board to use for communication with the host.
|
||||
|
|
@ -130,7 +131,7 @@
|
|||
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
//#define SERIAL_PORT_3 1
|
||||
//#define BAUDRATE_3 250000 // Enable to override BAUDRATE
|
||||
//#define BAUDRATE_3 250000 // :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] Enable to override BAUDRATE
|
||||
|
||||
// Enable the Bluetooth serial interface on AT90USB devices
|
||||
//#define BLUETOOTH
|
||||
|
|
@ -389,7 +390,7 @@
|
|||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
// @section psu control
|
||||
|
||||
/**
|
||||
* Power Supply Control
|
||||
|
|
@ -625,6 +626,8 @@
|
|||
//============================= PID Settings ================================
|
||||
//===========================================================================
|
||||
|
||||
// @section hotend temp
|
||||
|
||||
// Enable PIDTEMP for PID control or MPCTEMP for Predictive Model.
|
||||
// temperature control. Disable both for bang-bang heating.
|
||||
#define PIDTEMP // See the PID Tuning Guide at https://reprap.org/wiki/PID_Tuning
|
||||
|
|
@ -635,7 +638,8 @@
|
|||
#define PID_K1 0.95 // Smoothing factor within any PID loop
|
||||
|
||||
#if ENABLED(PIDTEMP)
|
||||
//#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders)
|
||||
//#define PID_DEBUG // Print PID debug data to the serial port. Use 'M303 D' to toggle activation.
|
||||
//#define PID_PARAMS_PER_HOTEND // Use separate PID parameters for each extruder (useful for mismatched extruders)
|
||||
// Set/get with G-code: M301 E[extruder number, 0-2]
|
||||
|
||||
// MeCreator2
|
||||
|
|
@ -658,6 +662,7 @@
|
|||
* Use a physical model of the hotend to control temperature. When configured correctly
|
||||
* this gives better responsiveness and stability than PID and it also removes the need
|
||||
* for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model.
|
||||
* @section mpctemp
|
||||
*/
|
||||
#if ENABLED(MPCTEMP)
|
||||
//#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash)
|
||||
|
|
@ -725,7 +730,7 @@
|
|||
|
||||
#if ENABLED(PIDTEMPBED)
|
||||
//#define MIN_BED_POWER 0
|
||||
//#define PID_BED_DEBUG // Sends debug data to the serial port.
|
||||
//#define PID_BED_DEBUG // Print Bed PID debug data to the serial port.
|
||||
// MeCreator2 generated by Autotune
|
||||
#define DEFAULT_bedKp 182.46 // 175.68 189.95
|
||||
#define DEFAULT_bedKi 35.92 // 34.59 37.40
|
||||
|
|
@ -751,6 +756,7 @@
|
|||
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 200W
|
||||
* heater. If your configuration is significantly different than this and you don't understand
|
||||
* the issues involved, don't use chamber PID until someone else verifies that your hardware works.
|
||||
* @section chamber temp
|
||||
*/
|
||||
//#define PIDTEMPCHAMBER
|
||||
//#define CHAMBER_LIMIT_SWITCHING
|
||||
|
|
@ -765,7 +771,7 @@
|
|||
|
||||
#if ENABLED(PIDTEMPCHAMBER)
|
||||
#define MIN_CHAMBER_POWER 0
|
||||
//#define PID_CHAMBER_DEBUG // Sends debug data to the serial port.
|
||||
//#define PID_CHAMBER_DEBUG // Print Chamber PID debug data to the serial port.
|
||||
|
||||
// Lasko "MyHeat Personal Heater" (200w) modified with a Fotek SSR-10DA to control only the heating element
|
||||
// and placed inside the small Creality printer enclosure tent.
|
||||
|
|
@ -779,7 +785,6 @@
|
|||
#endif // PIDTEMPCHAMBER
|
||||
|
||||
#if ANY(PIDTEMP, PIDTEMPBED, PIDTEMPCHAMBER)
|
||||
//#define PID_DEBUG // Sends debug data to the serial port. Use 'M303 D' to toggle activation.
|
||||
//#define PID_OPENLOOP // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX
|
||||
//#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay
|
||||
#define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature
|
||||
|
|
@ -789,7 +794,7 @@
|
|||
//#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of flash)
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
// @section safety
|
||||
|
||||
/**
|
||||
* Prevent extrusion if the temperature is below EXTRUDE_MINTEMP.
|
||||
|
|
@ -857,6 +862,8 @@
|
|||
#define POLAR_SEGMENTS_PER_SECOND 5
|
||||
#endif
|
||||
|
||||
// @section delta
|
||||
|
||||
// Enable for DELTA kinematics and configure below
|
||||
//#define DELTA
|
||||
#if ENABLED(DELTA)
|
||||
|
|
@ -916,6 +923,8 @@
|
|||
//#define DELTA_DIAGONAL_ROD_TRIM_TOWER { 0.0, 0.0, 0.0 }
|
||||
#endif
|
||||
|
||||
// @section scara
|
||||
|
||||
/**
|
||||
* MORGAN_SCARA was developed by QHARLEY in South Africa in 2012-2013.
|
||||
* Implemented and slightly reworked by JCERNY in June, 2014.
|
||||
|
|
@ -959,6 +968,8 @@
|
|||
|
||||
#endif
|
||||
|
||||
// @section tpara
|
||||
|
||||
// Enable for TPARA kinematics and configure below
|
||||
//#define AXEL_TPARA
|
||||
#if ENABLED(AXEL_TPARA)
|
||||
|
|
@ -985,6 +996,8 @@
|
|||
#define PSI_HOMING_OFFSET 0
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
|
|
@ -996,7 +1009,7 @@
|
|||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
||||
// @section homing
|
||||
// @section endstops
|
||||
|
||||
// Specify here all the endstop connectors that are connected to any endstop or probe.
|
||||
// Almost all printers will be using one per axis. Probes will use one or more of the
|
||||
|
|
@ -1666,7 +1679,7 @@
|
|||
//#define V_HOME_DIR -1
|
||||
//#define W_HOME_DIR -1
|
||||
|
||||
// @section machine
|
||||
// @section geometry
|
||||
|
||||
// The size of the printable area
|
||||
#define X_BED_SIZE 160
|
||||
|
|
@ -2126,7 +2139,7 @@
|
|||
//============================= Additional Features ===========================
|
||||
//=============================================================================
|
||||
|
||||
// @section extras
|
||||
// @section eeprom
|
||||
|
||||
/**
|
||||
* EEPROM
|
||||
|
|
@ -2146,6 +2159,8 @@
|
|||
//#define EEPROM_INIT_NOW // Init EEPROM on first boot after a new build.
|
||||
#endif
|
||||
|
||||
// @section host
|
||||
|
||||
//
|
||||
// Host Keepalive
|
||||
//
|
||||
|
|
@ -2156,6 +2171,8 @@
|
|||
#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113.
|
||||
#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating
|
||||
|
||||
// @section units
|
||||
|
||||
//
|
||||
// G20/G21 Inch mode support
|
||||
//
|
||||
|
|
@ -2183,6 +2200,8 @@
|
|||
#define PREHEAT_2_TEMP_CHAMBER 35
|
||||
#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
|
||||
|
||||
// @section motion
|
||||
|
||||
/**
|
||||
* Nozzle Park
|
||||
*
|
||||
|
|
@ -2281,6 +2300,8 @@
|
|||
|
||||
#endif
|
||||
|
||||
// @section host
|
||||
|
||||
/**
|
||||
* Print Job Timer
|
||||
*
|
||||
|
|
@ -2307,6 +2328,8 @@
|
|||
*/
|
||||
#define PRINTJOB_TIMER_AUTOSTART
|
||||
|
||||
// @section stats
|
||||
|
||||
/**
|
||||
* Print Counter
|
||||
*
|
||||
|
|
@ -2324,6 +2347,8 @@
|
|||
#define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print
|
||||
#endif
|
||||
|
||||
// @section security
|
||||
|
||||
/**
|
||||
* Password
|
||||
*
|
||||
|
|
@ -2359,7 +2384,7 @@
|
|||
//============================= LCD and SD support ============================
|
||||
//=============================================================================
|
||||
|
||||
// @section lcd
|
||||
// @section interface
|
||||
|
||||
/**
|
||||
* LCD LANGUAGE
|
||||
|
|
@ -2515,6 +2540,7 @@
|
|||
//======================== LCD / Controller Selection =========================
|
||||
//======================== (Character-based LCDs) =========================
|
||||
//=============================================================================
|
||||
// @section lcd
|
||||
|
||||
//
|
||||
// RepRapDiscount Smart Controller.
|
||||
|
|
@ -3160,7 +3186,7 @@
|
|||
//=============================== Extra Features ==============================
|
||||
//=============================================================================
|
||||
|
||||
// @section extras
|
||||
// @section fans
|
||||
|
||||
// Set number of user-controlled fans. Disable to use all board-defined fans.
|
||||
// :[1,2,3,4,5,6,7,8]
|
||||
|
|
@ -3184,14 +3210,18 @@
|
|||
// duty cycle is attained.
|
||||
//#define SOFT_PWM_DITHER
|
||||
|
||||
// @section extras
|
||||
|
||||
// Support for the BariCUDA Paste Extruder
|
||||
//#define BARICUDA
|
||||
|
||||
// @section lights
|
||||
|
||||
// Temperature status LEDs that display the hotend and bed temperature.
|
||||
// If all hotends, bed temperature, and target temperature are under 54C
|
||||
// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis)
|
||||
//#define TEMP_STAT_LEDS
|
||||
|
||||
// Support for the BariCUDA Paste Extruder
|
||||
//#define BARICUDA
|
||||
|
||||
// Support for BlinkM/CyzRgb
|
||||
//#define BLINKM
|
||||
|
||||
|
|
@ -3277,6 +3307,8 @@
|
|||
#define PRINTER_EVENT_LEDS
|
||||
#endif
|
||||
|
||||
// @section servos
|
||||
|
||||
/**
|
||||
* Number of servos
|
||||
*
|
||||
|
|
|
|||
|
|
@ -32,6 +32,24 @@
|
|||
*/
|
||||
#define CONFIGURATION_ADV_H_VERSION 02010100
|
||||
|
||||
// @section develop
|
||||
|
||||
/**
|
||||
* Configuration Dump to JSON and INI format
|
||||
*
|
||||
* Dump the configuration as part of the build. (See signature.py)
|
||||
* Output files are saved with the build (e.g., .pio/build/mega2560).
|
||||
*
|
||||
* See `build_all_examples --ini` as an example of config.ini archiving.
|
||||
*
|
||||
* 1 = marlin_config.json - Dictionary containing the configuration.
|
||||
* This file is also generated for CONFIGURATION_EMBEDDING.
|
||||
* 2 = config.ini - File format for PlatformIO preprocessing.
|
||||
* 3 = schema.json - The entire configuration schema. (13 = pattern groups)
|
||||
* 4 = schema.yml - The entire configuration schema.
|
||||
*/
|
||||
//#define CONFIG_DUMP // :[1:'JSON', 2:'config.ini', 3:'schema.json', 4:'schema.yml']
|
||||
|
||||
//===========================================================================
|
||||
//============================= Thermal Settings ============================
|
||||
//===========================================================================
|
||||
|
|
@ -2557,6 +2575,8 @@
|
|||
#endif
|
||||
#endif // HAS_MULTI_EXTRUDER
|
||||
|
||||
// @section advanced pause
|
||||
|
||||
/**
|
||||
* Advanced Pause for Filament Change
|
||||
* - Adds the G-code M600 Filament Change to initiate a filament change.
|
||||
|
|
@ -2615,13 +2635,12 @@
|
|||
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
|
||||
#endif
|
||||
|
||||
// @section tmc
|
||||
|
||||
/**
|
||||
* TMC26X Stepper Driver options
|
||||
*
|
||||
* The TMC26XStepper library is required for this stepper driver.
|
||||
* https://github.com/trinamic/TMC26XStepper
|
||||
* @section tmc/tmc26x
|
||||
*/
|
||||
#if HAS_DRIVER(TMC26X)
|
||||
|
||||
|
|
@ -2759,8 +2778,6 @@
|
|||
|
||||
#endif // TMC26X
|
||||
|
||||
// @section tmc_smart
|
||||
|
||||
/**
|
||||
* To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode
|
||||
* connect your SPI pins to the hardware SPI interface on your board and define
|
||||
|
|
@ -2776,6 +2793,7 @@
|
|||
*
|
||||
* TMCStepper library is required to use TMC stepper drivers.
|
||||
* https://github.com/teemuatlut/TMCStepper
|
||||
* @section tmc/config
|
||||
*/
|
||||
#if HAS_TRINAMIC_CONFIG
|
||||
|
||||
|
|
@ -2999,6 +3017,8 @@
|
|||
//#define E7_HOLD_MULTIPLIER 0.5
|
||||
#endif
|
||||
|
||||
// @section tmc/spi
|
||||
|
||||
/**
|
||||
* Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here.
|
||||
* The default pins can be found in your board's pins file.
|
||||
|
|
@ -3036,6 +3056,8 @@
|
|||
//#define TMC_SW_MISO -1
|
||||
//#define TMC_SW_SCK -1
|
||||
|
||||
// @section tmc/serial
|
||||
|
||||
/**
|
||||
* Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
|
||||
* Set the address using jumpers on pins MS1 and MS2.
|
||||
|
|
@ -3071,6 +3093,8 @@
|
|||
//#define E6_SLAVE_ADDRESS 0
|
||||
//#define E7_SLAVE_ADDRESS 0
|
||||
|
||||
// @section tmc/smart
|
||||
|
||||
/**
|
||||
* Software enable
|
||||
*
|
||||
|
|
@ -3079,6 +3103,8 @@
|
|||
*/
|
||||
//#define SOFTWARE_DRIVER_ENABLE
|
||||
|
||||
// @section tmc/stealthchop
|
||||
|
||||
/**
|
||||
* TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only
|
||||
* Use Trinamic's ultra quiet stepping mode.
|
||||
|
|
@ -3133,6 +3159,8 @@
|
|||
//#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
|
||||
//#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
|
||||
|
||||
// @section tmc/status
|
||||
|
||||
/**
|
||||
* Monitor Trinamic drivers
|
||||
* for error conditions like overtemperature and short to ground.
|
||||
|
|
@ -3152,6 +3180,8 @@
|
|||
#define STOP_ON_ERROR
|
||||
#endif
|
||||
|
||||
// @section tmc/hybrid
|
||||
|
||||
/**
|
||||
* TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only
|
||||
* The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD.
|
||||
|
|
@ -3208,6 +3238,7 @@
|
|||
* homing and adds a guard period for endstop triggering.
|
||||
*
|
||||
* Comment *_STALL_SENSITIVITY to disable sensorless homing for that axis.
|
||||
* @section tmc/stallguard
|
||||
*/
|
||||
//#define SENSORLESS_HOMING // StallGuard capable drivers only
|
||||
|
||||
|
|
@ -3231,6 +3262,8 @@
|
|||
//#define IMPROVE_HOMING_RELIABILITY
|
||||
#endif
|
||||
|
||||
// @section tmc/config
|
||||
|
||||
/**
|
||||
* TMC Homing stepper phase.
|
||||
*
|
||||
|
|
@ -3311,7 +3344,7 @@
|
|||
#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave
|
||||
#endif
|
||||
|
||||
// @section extras
|
||||
// @section photo
|
||||
|
||||
/**
|
||||
* Photo G-code
|
||||
|
|
@ -3354,6 +3387,8 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
// @section cnc
|
||||
|
||||
/**
|
||||
* Spindle & Laser control
|
||||
*
|
||||
|
|
@ -3558,6 +3593,8 @@
|
|||
#define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
|
||||
#endif
|
||||
|
||||
// @section filament width
|
||||
|
||||
/**
|
||||
* Filament Width Sensor
|
||||
*
|
||||
|
|
@ -3591,6 +3628,8 @@
|
|||
//#define FILAMENT_LCD_DISPLAY
|
||||
#endif
|
||||
|
||||
// @section power
|
||||
|
||||
/**
|
||||
* Power Monitor
|
||||
* Monitor voltage (V) and/or current (A), and -when possible- power (W)
|
||||
|
|
@ -3614,6 +3653,8 @@
|
|||
#define POWER_MONITOR_VOLTAGE_OFFSET 0 // Offset (in volts) applied to the calculated voltage
|
||||
#endif
|
||||
|
||||
// @section safety
|
||||
|
||||
/**
|
||||
* Stepper Driver Anti-SNAFU Protection
|
||||
*
|
||||
|
|
@ -3623,6 +3664,8 @@
|
|||
*/
|
||||
//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
|
||||
|
||||
// @section cnc
|
||||
|
||||
/**
|
||||
* CNC Coordinate Systems
|
||||
*
|
||||
|
|
@ -3639,6 +3682,8 @@
|
|||
*/
|
||||
//#define CNC_DRILLING_CYCLE
|
||||
|
||||
// @section reporting
|
||||
|
||||
/**
|
||||
* Auto-report fan speed with M123 S<seconds>
|
||||
* Requires fans with tachometer pins
|
||||
|
|
@ -3666,6 +3711,8 @@
|
|||
//#define M115_GEOMETRY_REPORT
|
||||
#endif
|
||||
|
||||
// @section security
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
|
|
@ -3673,6 +3720,8 @@
|
|||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
// @section volumetrics
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
|
|
@ -3701,14 +3750,7 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Enable this option for a leaner build of Marlin that removes all
|
||||
* workspace offsets, simplifying coordinate transformations, leveling, etc.
|
||||
*
|
||||
* - M206 and M428 are disabled.
|
||||
* - G92 will revert to its behavior from Marlin 1.0.
|
||||
*/
|
||||
//#define NO_WORKSPACE_OFFSETS
|
||||
// @section reporting
|
||||
|
||||
// Extra options for the M114 "Current Position" report
|
||||
//#define M114_DETAIL // Use 'M114` for details to check planner calculations
|
||||
|
|
@ -3717,6 +3759,8 @@
|
|||
|
||||
//#define REPORT_FAN_CHANGE // Report the new fan speed when changed by M106 (and others)
|
||||
|
||||
// @section gcode
|
||||
|
||||
/**
|
||||
* Spend 28 bytes of SRAM to optimize the G-code parser
|
||||
*/
|
||||
|
|
@ -3734,6 +3778,15 @@
|
|||
|
||||
//#define REPETIER_GCODE_M360 // Add commands originally from Repetier FW
|
||||
|
||||
/**
|
||||
* Enable this option for a leaner build of Marlin that removes all
|
||||
* workspace offsets, simplifying coordinate transformations, leveling, etc.
|
||||
*
|
||||
* - M206 and M428 are disabled.
|
||||
* - G92 will revert to its behavior from Marlin 1.0.
|
||||
*/
|
||||
//#define NO_WORKSPACE_OFFSETS
|
||||
|
||||
/**
|
||||
* CNC G-code options
|
||||
* Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.
|
||||
|
|
@ -3750,6 +3803,8 @@
|
|||
#endif
|
||||
//#define G0_ANGULAR_FEEDRATE 2700 // (°/min)
|
||||
|
||||
// @section gcode
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
|
|
@ -3774,6 +3829,8 @@
|
|||
* Up to 25 may be defined, but the actual number is LCD-dependent.
|
||||
*/
|
||||
|
||||
// @section custom main menu
|
||||
|
||||
// Custom Menu: Main Menu
|
||||
//#define CUSTOM_MENU_MAIN
|
||||
#if ENABLED(CUSTOM_MENU_MAIN)
|
||||
|
|
@ -3804,6 +3861,8 @@
|
|||
//#define MAIN_MENU_ITEM_5_CONFIRM
|
||||
#endif
|
||||
|
||||
// @section custom config menu
|
||||
|
||||
// Custom Menu: Configuration Menu
|
||||
//#define CUSTOM_MENU_CONFIG
|
||||
#if ENABLED(CUSTOM_MENU_CONFIG)
|
||||
|
|
@ -3834,6 +3893,8 @@
|
|||
//#define CONFIG_MENU_ITEM_5_CONFIRM
|
||||
#endif
|
||||
|
||||
// @section custom buttons
|
||||
|
||||
/**
|
||||
* User-defined buttons to run custom G-code.
|
||||
* Up to 25 may be defined.
|
||||
|
|
@ -3865,6 +3926,8 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
// @section host
|
||||
|
||||
/**
|
||||
* Host Action Commands
|
||||
*
|
||||
|
|
@ -3890,6 +3953,8 @@
|
|||
//#define HOST_SHUTDOWN_MENU_ITEM // Add a menu item that tells the host to shut down
|
||||
#endif
|
||||
|
||||
// @section extras
|
||||
|
||||
/**
|
||||
* Cancel Objects
|
||||
*
|
||||
|
|
@ -3911,6 +3976,7 @@
|
|||
* Alternative Supplier: https://reliabuild3d.com/
|
||||
*
|
||||
* Reliabuild encoders have been modified to improve reliability.
|
||||
* @section i2c encoders
|
||||
*/
|
||||
|
||||
//#define I2C_POSITION_ENCODERS
|
||||
|
|
@ -3982,6 +4048,7 @@
|
|||
|
||||
/**
|
||||
* Analog Joystick(s)
|
||||
* @section joystick
|
||||
*/
|
||||
//#define JOYSTICK
|
||||
#if ENABLED(JOYSTICK)
|
||||
|
|
@ -4006,6 +4073,7 @@
|
|||
* Modern replacement for the Prusa TMC_Z_CALIBRATION.
|
||||
* Adds capability to work with any adjustable current drivers.
|
||||
* Implemented as G34 because M915 is deprecated.
|
||||
* @section calibrate
|
||||
*/
|
||||
//#define MECHANICAL_GANTRY_CALIBRATION
|
||||
#if ENABLED(MECHANICAL_GANTRY_CALIBRATION)
|
||||
|
|
@ -4023,6 +4091,7 @@
|
|||
/**
|
||||
* Instant freeze / unfreeze functionality
|
||||
* Potentially useful for emergency stop that allows being resumed.
|
||||
* @section interface
|
||||
*/
|
||||
//#define FREEZE_FEATURE
|
||||
#if ENABLED(FREEZE_FEATURE)
|
||||
|
|
@ -4035,6 +4104,7 @@
|
|||
*
|
||||
* Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display.
|
||||
* Requires 3 signal wires. Some useful debug options are included to demonstrate its usage.
|
||||
* @section debug matrix
|
||||
*/
|
||||
//#define MAX7219_DEBUG
|
||||
#if ENABLED(MAX7219_DEBUG)
|
||||
|
|
@ -4073,6 +4143,7 @@
|
|||
* Support for Synchronized Z moves when used with NanoDLP. G0/G1 axis moves will
|
||||
* output a "Z_move_comp" string to enable synchronization with DLP projector exposure.
|
||||
* This feature allows you to use [[WaitForDoneMessage]] instead of M400 commands.
|
||||
* @section nanodlp
|
||||
*/
|
||||
//#define NANODLP_Z_SYNC
|
||||
#if ENABLED(NANODLP_Z_SYNC)
|
||||
|
|
@ -4081,6 +4152,7 @@
|
|||
|
||||
/**
|
||||
* Ethernet. Use M552 to enable and set the IP address.
|
||||
* @section network
|
||||
*/
|
||||
#if HAS_ETHERNET
|
||||
#define MAC_ADDRESS { 0xDE, 0xAD, 0xBE, 0xEF, 0xF0, 0x0D } // A MAC address unique to your network
|
||||
|
|
@ -4108,6 +4180,8 @@
|
|||
//#include "Configuration_Secure.h" // External file with WiFi SSID / Password
|
||||
#endif
|
||||
|
||||
// @section multi-material
|
||||
|
||||
/**
|
||||
* Průša Multi-Material Unit (MMU)
|
||||
* Enable in Configuration.h
|
||||
|
|
@ -4215,6 +4289,7 @@
|
|||
|
||||
/**
|
||||
* Advanced Print Counter settings
|
||||
* @section stats
|
||||
*/
|
||||
#if ENABLED(PRINTCOUNTER)
|
||||
#define SERVICE_WARNING_BUZZES 3
|
||||
|
|
|
|||
|
|
@ -114,6 +114,7 @@
|
|||
* :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
|
||||
*/
|
||||
#define BAUDRATE 250000
|
||||
|
||||
//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate
|
||||
|
||||
/**
|
||||
|
|
@ -122,7 +123,7 @@
|
|||
* :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
//#define SERIAL_PORT_2 -1
|
||||
//#define BAUDRATE_2 250000 // Enable to override BAUDRATE
|
||||
//#define BAUDRATE_2 250000 // :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] Enable to override BAUDRATE
|
||||
|
||||
/**
|
||||
* Select a third serial port on the board to use for communication with the host.
|
||||
|
|
@ -130,7 +131,7 @@
|
|||
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
//#define SERIAL_PORT_3 1
|
||||
//#define BAUDRATE_3 250000 // Enable to override BAUDRATE
|
||||
//#define BAUDRATE_3 250000 // :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] Enable to override BAUDRATE
|
||||
|
||||
// Enable the Bluetooth serial interface on AT90USB devices
|
||||
//#define BLUETOOTH
|
||||
|
|
@ -389,7 +390,7 @@
|
|||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
// @section psu control
|
||||
|
||||
/**
|
||||
* Power Supply Control
|
||||
|
|
@ -625,6 +626,8 @@
|
|||
//============================= PID Settings ================================
|
||||
//===========================================================================
|
||||
|
||||
// @section hotend temp
|
||||
|
||||
// Enable PIDTEMP for PID control or MPCTEMP for Predictive Model.
|
||||
// temperature control. Disable both for bang-bang heating.
|
||||
#define PIDTEMP // See the PID Tuning Guide at https://reprap.org/wiki/PID_Tuning
|
||||
|
|
@ -635,7 +638,8 @@
|
|||
#define PID_K1 0.95 // Smoothing factor within any PID loop
|
||||
|
||||
#if ENABLED(PIDTEMP)
|
||||
//#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders)
|
||||
//#define PID_DEBUG // Print PID debug data to the serial port. Use 'M303 D' to toggle activation.
|
||||
//#define PID_PARAMS_PER_HOTEND // Use separate PID parameters for each extruder (useful for mismatched extruders)
|
||||
// Set/get with G-code: M301 E[extruder number, 0-2]
|
||||
|
||||
#if ENABLED(PID_PARAMS_PER_HOTEND)
|
||||
|
|
@ -657,6 +661,7 @@
|
|||
* Use a physical model of the hotend to control temperature. When configured correctly
|
||||
* this gives better responsiveness and stability than PID and it also removes the need
|
||||
* for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model.
|
||||
* @section mpctemp
|
||||
*/
|
||||
#if ENABLED(MPCTEMP)
|
||||
//#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash)
|
||||
|
|
@ -724,7 +729,7 @@
|
|||
|
||||
#if ENABLED(PIDTEMPBED)
|
||||
//#define MIN_BED_POWER 0
|
||||
//#define PID_BED_DEBUG // Sends debug data to the serial port.
|
||||
//#define PID_BED_DEBUG // Print Bed PID debug data to the serial port.
|
||||
|
||||
// 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
|
||||
// from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
|
||||
|
|
@ -752,6 +757,7 @@
|
|||
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 200W
|
||||
* heater. If your configuration is significantly different than this and you don't understand
|
||||
* the issues involved, don't use chamber PID until someone else verifies that your hardware works.
|
||||
* @section chamber temp
|
||||
*/
|
||||
//#define PIDTEMPCHAMBER
|
||||
//#define CHAMBER_LIMIT_SWITCHING
|
||||
|
|
@ -766,7 +772,7 @@
|
|||
|
||||
#if ENABLED(PIDTEMPCHAMBER)
|
||||
#define MIN_CHAMBER_POWER 0
|
||||
//#define PID_CHAMBER_DEBUG // Sends debug data to the serial port.
|
||||
//#define PID_CHAMBER_DEBUG // Print Chamber PID debug data to the serial port.
|
||||
|
||||
// Lasko "MyHeat Personal Heater" (200w) modified with a Fotek SSR-10DA to control only the heating element
|
||||
// and placed inside the small Creality printer enclosure tent.
|
||||
|
|
@ -780,7 +786,6 @@
|
|||
#endif // PIDTEMPCHAMBER
|
||||
|
||||
#if ANY(PIDTEMP, PIDTEMPBED, PIDTEMPCHAMBER)
|
||||
//#define PID_DEBUG // Sends debug data to the serial port. Use 'M303 D' to toggle activation.
|
||||
//#define PID_OPENLOOP // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX
|
||||
//#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay
|
||||
#define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature
|
||||
|
|
@ -790,7 +795,7 @@
|
|||
//#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of flash)
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
// @section safety
|
||||
|
||||
/**
|
||||
* Prevent extrusion if the temperature is below EXTRUDE_MINTEMP.
|
||||
|
|
@ -858,6 +863,8 @@
|
|||
#define POLAR_SEGMENTS_PER_SECOND 5
|
||||
#endif
|
||||
|
||||
// @section delta
|
||||
|
||||
// Enable for DELTA kinematics and configure below
|
||||
//#define DELTA
|
||||
#if ENABLED(DELTA)
|
||||
|
|
@ -917,6 +924,8 @@
|
|||
//#define DELTA_DIAGONAL_ROD_TRIM_TOWER { 0.0, 0.0, 0.0 }
|
||||
#endif
|
||||
|
||||
// @section scara
|
||||
|
||||
/**
|
||||
* MORGAN_SCARA was developed by QHARLEY in South Africa in 2012-2013.
|
||||
* Implemented and slightly reworked by JCERNY in June, 2014.
|
||||
|
|
@ -960,6 +969,8 @@
|
|||
|
||||
#endif
|
||||
|
||||
// @section tpara
|
||||
|
||||
// Enable for TPARA kinematics and configure below
|
||||
//#define AXEL_TPARA
|
||||
#if ENABLED(AXEL_TPARA)
|
||||
|
|
@ -986,6 +997,8 @@
|
|||
#define PSI_HOMING_OFFSET 0
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
|
|
@ -997,7 +1010,7 @@
|
|||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
||||
// @section homing
|
||||
// @section endstops
|
||||
|
||||
// Specify here all the endstop connectors that are connected to any endstop or probe.
|
||||
// Almost all printers will be using one per axis. Probes will use one or more of the
|
||||
|
|
@ -1667,7 +1680,7 @@
|
|||
//#define V_HOME_DIR -1
|
||||
//#define W_HOME_DIR -1
|
||||
|
||||
// @section machine
|
||||
// @section geometry
|
||||
|
||||
// The size of the printable area
|
||||
#define X_BED_SIZE 160
|
||||
|
|
@ -2127,7 +2140,7 @@
|
|||
//============================= Additional Features ===========================
|
||||
//=============================================================================
|
||||
|
||||
// @section extras
|
||||
// @section eeprom
|
||||
|
||||
/**
|
||||
* EEPROM
|
||||
|
|
@ -2147,6 +2160,8 @@
|
|||
//#define EEPROM_INIT_NOW // Init EEPROM on first boot after a new build.
|
||||
#endif
|
||||
|
||||
// @section host
|
||||
|
||||
//
|
||||
// Host Keepalive
|
||||
//
|
||||
|
|
@ -2157,6 +2172,8 @@
|
|||
#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113.
|
||||
#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating
|
||||
|
||||
// @section units
|
||||
|
||||
//
|
||||
// G20/G21 Inch mode support
|
||||
//
|
||||
|
|
@ -2184,6 +2201,8 @@
|
|||
#define PREHEAT_2_TEMP_CHAMBER 35
|
||||
#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
|
||||
|
||||
// @section motion
|
||||
|
||||
/**
|
||||
* Nozzle Park
|
||||
*
|
||||
|
|
@ -2282,6 +2301,8 @@
|
|||
|
||||
#endif
|
||||
|
||||
// @section host
|
||||
|
||||
/**
|
||||
* Print Job Timer
|
||||
*
|
||||
|
|
@ -2308,6 +2329,8 @@
|
|||
*/
|
||||
#define PRINTJOB_TIMER_AUTOSTART
|
||||
|
||||
// @section stats
|
||||
|
||||
/**
|
||||
* Print Counter
|
||||
*
|
||||
|
|
@ -2325,6 +2348,8 @@
|
|||
#define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print
|
||||
#endif
|
||||
|
||||
// @section security
|
||||
|
||||
/**
|
||||
* Password
|
||||
*
|
||||
|
|
@ -2360,7 +2385,7 @@
|
|||
//============================= LCD and SD support ============================
|
||||
//=============================================================================
|
||||
|
||||
// @section lcd
|
||||
// @section interface
|
||||
|
||||
/**
|
||||
* LCD LANGUAGE
|
||||
|
|
@ -2516,6 +2541,7 @@
|
|||
//======================== LCD / Controller Selection =========================
|
||||
//======================== (Character-based LCDs) =========================
|
||||
//=============================================================================
|
||||
// @section lcd
|
||||
|
||||
//
|
||||
// RepRapDiscount Smart Controller.
|
||||
|
|
@ -3161,7 +3187,7 @@
|
|||
//=============================== Extra Features ==============================
|
||||
//=============================================================================
|
||||
|
||||
// @section extras
|
||||
// @section fans
|
||||
|
||||
// Set number of user-controlled fans. Disable to use all board-defined fans.
|
||||
// :[1,2,3,4,5,6,7,8]
|
||||
|
|
@ -3185,14 +3211,18 @@
|
|||
// duty cycle is attained.
|
||||
//#define SOFT_PWM_DITHER
|
||||
|
||||
// @section extras
|
||||
|
||||
// Support for the BariCUDA Paste Extruder
|
||||
//#define BARICUDA
|
||||
|
||||
// @section lights
|
||||
|
||||
// Temperature status LEDs that display the hotend and bed temperature.
|
||||
// If all hotends, bed temperature, and target temperature are under 54C
|
||||
// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis)
|
||||
//#define TEMP_STAT_LEDS
|
||||
|
||||
// Support for the BariCUDA Paste Extruder
|
||||
//#define BARICUDA
|
||||
|
||||
// Support for BlinkM/CyzRgb
|
||||
//#define BLINKM
|
||||
|
||||
|
|
@ -3278,6 +3308,8 @@
|
|||
#define PRINTER_EVENT_LEDS
|
||||
#endif
|
||||
|
||||
// @section servos
|
||||
|
||||
/**
|
||||
* Number of servos
|
||||
*
|
||||
|
|
|
|||
|
|
@ -32,6 +32,24 @@
|
|||
*/
|
||||
#define CONFIGURATION_ADV_H_VERSION 02010100
|
||||
|
||||
// @section develop
|
||||
|
||||
/**
|
||||
* Configuration Dump to JSON and INI format
|
||||
*
|
||||
* Dump the configuration as part of the build. (See signature.py)
|
||||
* Output files are saved with the build (e.g., .pio/build/mega2560).
|
||||
*
|
||||
* See `build_all_examples --ini` as an example of config.ini archiving.
|
||||
*
|
||||
* 1 = marlin_config.json - Dictionary containing the configuration.
|
||||
* This file is also generated for CONFIGURATION_EMBEDDING.
|
||||
* 2 = config.ini - File format for PlatformIO preprocessing.
|
||||
* 3 = schema.json - The entire configuration schema. (13 = pattern groups)
|
||||
* 4 = schema.yml - The entire configuration schema.
|
||||
*/
|
||||
//#define CONFIG_DUMP // :[1:'JSON', 2:'config.ini', 3:'schema.json', 4:'schema.yml']
|
||||
|
||||
//===========================================================================
|
||||
//============================= Thermal Settings ============================
|
||||
//===========================================================================
|
||||
|
|
@ -2558,6 +2576,8 @@
|
|||
#endif
|
||||
#endif // HAS_MULTI_EXTRUDER
|
||||
|
||||
// @section advanced pause
|
||||
|
||||
/**
|
||||
* Advanced Pause for Filament Change
|
||||
* - Adds the G-code M600 Filament Change to initiate a filament change.
|
||||
|
|
@ -2616,13 +2636,12 @@
|
|||
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
|
||||
#endif
|
||||
|
||||
// @section tmc
|
||||
|
||||
/**
|
||||
* TMC26X Stepper Driver options
|
||||
*
|
||||
* The TMC26XStepper library is required for this stepper driver.
|
||||
* https://github.com/trinamic/TMC26XStepper
|
||||
* @section tmc/tmc26x
|
||||
*/
|
||||
#if HAS_DRIVER(TMC26X)
|
||||
|
||||
|
|
@ -2760,8 +2779,6 @@
|
|||
|
||||
#endif // TMC26X
|
||||
|
||||
// @section tmc_smart
|
||||
|
||||
/**
|
||||
* To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode
|
||||
* connect your SPI pins to the hardware SPI interface on your board and define
|
||||
|
|
@ -2777,6 +2794,7 @@
|
|||
*
|
||||
* TMCStepper library is required to use TMC stepper drivers.
|
||||
* https://github.com/teemuatlut/TMCStepper
|
||||
* @section tmc/config
|
||||
*/
|
||||
#if HAS_TRINAMIC_CONFIG
|
||||
|
||||
|
|
@ -3000,6 +3018,8 @@
|
|||
//#define E7_HOLD_MULTIPLIER 0.5
|
||||
#endif
|
||||
|
||||
// @section tmc/spi
|
||||
|
||||
/**
|
||||
* Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here.
|
||||
* The default pins can be found in your board's pins file.
|
||||
|
|
@ -3037,6 +3057,8 @@
|
|||
//#define TMC_SW_MISO -1
|
||||
//#define TMC_SW_SCK -1
|
||||
|
||||
// @section tmc/serial
|
||||
|
||||
/**
|
||||
* Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
|
||||
* Set the address using jumpers on pins MS1 and MS2.
|
||||
|
|
@ -3072,6 +3094,8 @@
|
|||
//#define E6_SLAVE_ADDRESS 0
|
||||
//#define E7_SLAVE_ADDRESS 0
|
||||
|
||||
// @section tmc/smart
|
||||
|
||||
/**
|
||||
* Software enable
|
||||
*
|
||||
|
|
@ -3080,6 +3104,8 @@
|
|||
*/
|
||||
//#define SOFTWARE_DRIVER_ENABLE
|
||||
|
||||
// @section tmc/stealthchop
|
||||
|
||||
/**
|
||||
* TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only
|
||||
* Use Trinamic's ultra quiet stepping mode.
|
||||
|
|
@ -3134,6 +3160,8 @@
|
|||
//#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
|
||||
//#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
|
||||
|
||||
// @section tmc/status
|
||||
|
||||
/**
|
||||
* Monitor Trinamic drivers
|
||||
* for error conditions like overtemperature and short to ground.
|
||||
|
|
@ -3153,6 +3181,8 @@
|
|||
#define STOP_ON_ERROR
|
||||
#endif
|
||||
|
||||
// @section tmc/hybrid
|
||||
|
||||
/**
|
||||
* TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only
|
||||
* The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD.
|
||||
|
|
@ -3209,6 +3239,7 @@
|
|||
* homing and adds a guard period for endstop triggering.
|
||||
*
|
||||
* Comment *_STALL_SENSITIVITY to disable sensorless homing for that axis.
|
||||
* @section tmc/stallguard
|
||||
*/
|
||||
//#define SENSORLESS_HOMING // StallGuard capable drivers only
|
||||
|
||||
|
|
@ -3232,6 +3263,8 @@
|
|||
//#define IMPROVE_HOMING_RELIABILITY
|
||||
#endif
|
||||
|
||||
// @section tmc/config
|
||||
|
||||
/**
|
||||
* TMC Homing stepper phase.
|
||||
*
|
||||
|
|
@ -3312,7 +3345,7 @@
|
|||
#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave
|
||||
#endif
|
||||
|
||||
// @section extras
|
||||
// @section photo
|
||||
|
||||
/**
|
||||
* Photo G-code
|
||||
|
|
@ -3355,6 +3388,8 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
// @section cnc
|
||||
|
||||
/**
|
||||
* Spindle & Laser control
|
||||
*
|
||||
|
|
@ -3559,6 +3594,8 @@
|
|||
#define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
|
||||
#endif
|
||||
|
||||
// @section filament width
|
||||
|
||||
/**
|
||||
* Filament Width Sensor
|
||||
*
|
||||
|
|
@ -3592,6 +3629,8 @@
|
|||
//#define FILAMENT_LCD_DISPLAY
|
||||
#endif
|
||||
|
||||
// @section power
|
||||
|
||||
/**
|
||||
* Power Monitor
|
||||
* Monitor voltage (V) and/or current (A), and -when possible- power (W)
|
||||
|
|
@ -3615,6 +3654,8 @@
|
|||
#define POWER_MONITOR_VOLTAGE_OFFSET 0 // Offset (in volts) applied to the calculated voltage
|
||||
#endif
|
||||
|
||||
// @section safety
|
||||
|
||||
/**
|
||||
* Stepper Driver Anti-SNAFU Protection
|
||||
*
|
||||
|
|
@ -3624,6 +3665,8 @@
|
|||
*/
|
||||
//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
|
||||
|
||||
// @section cnc
|
||||
|
||||
/**
|
||||
* CNC Coordinate Systems
|
||||
*
|
||||
|
|
@ -3640,6 +3683,8 @@
|
|||
*/
|
||||
//#define CNC_DRILLING_CYCLE
|
||||
|
||||
// @section reporting
|
||||
|
||||
/**
|
||||
* Auto-report fan speed with M123 S<seconds>
|
||||
* Requires fans with tachometer pins
|
||||
|
|
@ -3667,6 +3712,8 @@
|
|||
//#define M115_GEOMETRY_REPORT
|
||||
#endif
|
||||
|
||||
// @section security
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
|
|
@ -3674,6 +3721,8 @@
|
|||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
// @section volumetrics
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
|
|
@ -3702,14 +3751,7 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Enable this option for a leaner build of Marlin that removes all
|
||||
* workspace offsets, simplifying coordinate transformations, leveling, etc.
|
||||
*
|
||||
* - M206 and M428 are disabled.
|
||||
* - G92 will revert to its behavior from Marlin 1.0.
|
||||
*/
|
||||
//#define NO_WORKSPACE_OFFSETS
|
||||
// @section reporting
|
||||
|
||||
// Extra options for the M114 "Current Position" report
|
||||
//#define M114_DETAIL // Use 'M114` for details to check planner calculations
|
||||
|
|
@ -3718,6 +3760,8 @@
|
|||
|
||||
//#define REPORT_FAN_CHANGE // Report the new fan speed when changed by M106 (and others)
|
||||
|
||||
// @section gcode
|
||||
|
||||
/**
|
||||
* Spend 28 bytes of SRAM to optimize the G-code parser
|
||||
*/
|
||||
|
|
@ -3735,6 +3779,15 @@
|
|||
|
||||
//#define REPETIER_GCODE_M360 // Add commands originally from Repetier FW
|
||||
|
||||
/**
|
||||
* Enable this option for a leaner build of Marlin that removes all
|
||||
* workspace offsets, simplifying coordinate transformations, leveling, etc.
|
||||
*
|
||||
* - M206 and M428 are disabled.
|
||||
* - G92 will revert to its behavior from Marlin 1.0.
|
||||
*/
|
||||
//#define NO_WORKSPACE_OFFSETS
|
||||
|
||||
/**
|
||||
* CNC G-code options
|
||||
* Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.
|
||||
|
|
@ -3751,6 +3804,8 @@
|
|||
#endif
|
||||
//#define G0_ANGULAR_FEEDRATE 2700 // (°/min)
|
||||
|
||||
// @section gcode
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
|
|
@ -3775,6 +3830,8 @@
|
|||
* Up to 25 may be defined, but the actual number is LCD-dependent.
|
||||
*/
|
||||
|
||||
// @section custom main menu
|
||||
|
||||
// Custom Menu: Main Menu
|
||||
//#define CUSTOM_MENU_MAIN
|
||||
#if ENABLED(CUSTOM_MENU_MAIN)
|
||||
|
|
@ -3805,6 +3862,8 @@
|
|||
//#define MAIN_MENU_ITEM_5_CONFIRM
|
||||
#endif
|
||||
|
||||
// @section custom config menu
|
||||
|
||||
// Custom Menu: Configuration Menu
|
||||
//#define CUSTOM_MENU_CONFIG
|
||||
#if ENABLED(CUSTOM_MENU_CONFIG)
|
||||
|
|
@ -3835,6 +3894,8 @@
|
|||
//#define CONFIG_MENU_ITEM_5_CONFIRM
|
||||
#endif
|
||||
|
||||
// @section custom buttons
|
||||
|
||||
/**
|
||||
* User-defined buttons to run custom G-code.
|
||||
* Up to 25 may be defined.
|
||||
|
|
@ -3866,6 +3927,8 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
// @section host
|
||||
|
||||
/**
|
||||
* Host Action Commands
|
||||
*
|
||||
|
|
@ -3891,6 +3954,8 @@
|
|||
//#define HOST_SHUTDOWN_MENU_ITEM // Add a menu item that tells the host to shut down
|
||||
#endif
|
||||
|
||||
// @section extras
|
||||
|
||||
/**
|
||||
* Cancel Objects
|
||||
*
|
||||
|
|
@ -3912,6 +3977,7 @@
|
|||
* Alternative Supplier: https://reliabuild3d.com/
|
||||
*
|
||||
* Reliabuild encoders have been modified to improve reliability.
|
||||
* @section i2c encoders
|
||||
*/
|
||||
|
||||
//#define I2C_POSITION_ENCODERS
|
||||
|
|
@ -3983,6 +4049,7 @@
|
|||
|
||||
/**
|
||||
* Analog Joystick(s)
|
||||
* @section joystick
|
||||
*/
|
||||
//#define JOYSTICK
|
||||
#if ENABLED(JOYSTICK)
|
||||
|
|
@ -4007,6 +4074,7 @@
|
|||
* Modern replacement for the Prusa TMC_Z_CALIBRATION.
|
||||
* Adds capability to work with any adjustable current drivers.
|
||||
* Implemented as G34 because M915 is deprecated.
|
||||
* @section calibrate
|
||||
*/
|
||||
//#define MECHANICAL_GANTRY_CALIBRATION
|
||||
#if ENABLED(MECHANICAL_GANTRY_CALIBRATION)
|
||||
|
|
@ -4024,6 +4092,7 @@
|
|||
/**
|
||||
* Instant freeze / unfreeze functionality
|
||||
* Potentially useful for emergency stop that allows being resumed.
|
||||
* @section interface
|
||||
*/
|
||||
//#define FREEZE_FEATURE
|
||||
#if ENABLED(FREEZE_FEATURE)
|
||||
|
|
@ -4036,6 +4105,7 @@
|
|||
*
|
||||
* Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display.
|
||||
* Requires 3 signal wires. Some useful debug options are included to demonstrate its usage.
|
||||
* @section debug matrix
|
||||
*/
|
||||
//#define MAX7219_DEBUG
|
||||
#if ENABLED(MAX7219_DEBUG)
|
||||
|
|
@ -4074,6 +4144,7 @@
|
|||
* Support for Synchronized Z moves when used with NanoDLP. G0/G1 axis moves will
|
||||
* output a "Z_move_comp" string to enable synchronization with DLP projector exposure.
|
||||
* This feature allows you to use [[WaitForDoneMessage]] instead of M400 commands.
|
||||
* @section nanodlp
|
||||
*/
|
||||
//#define NANODLP_Z_SYNC
|
||||
#if ENABLED(NANODLP_Z_SYNC)
|
||||
|
|
@ -4082,6 +4153,7 @@
|
|||
|
||||
/**
|
||||
* Ethernet. Use M552 to enable and set the IP address.
|
||||
* @section network
|
||||
*/
|
||||
#if HAS_ETHERNET
|
||||
#define MAC_ADDRESS { 0xDE, 0xAD, 0xBE, 0xEF, 0xF0, 0x0D } // A MAC address unique to your network
|
||||
|
|
@ -4109,6 +4181,8 @@
|
|||
//#include "Configuration_Secure.h" // External file with WiFi SSID / Password
|
||||
#endif
|
||||
|
||||
// @section multi-material
|
||||
|
||||
/**
|
||||
* Průša Multi-Material Unit (MMU)
|
||||
* Enable in Configuration.h
|
||||
|
|
@ -4216,6 +4290,7 @@
|
|||
|
||||
/**
|
||||
* Advanced Print Counter settings
|
||||
* @section stats
|
||||
*/
|
||||
#if ENABLED(PRINTCOUNTER)
|
||||
#define SERVICE_WARNING_BUZZES 3
|
||||
|
|
|
|||
|
|
@ -114,6 +114,7 @@
|
|||
* :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
|
||||
*/
|
||||
#define BAUDRATE 250000
|
||||
|
||||
//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate
|
||||
|
||||
/**
|
||||
|
|
@ -122,7 +123,7 @@
|
|||
* :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
//#define SERIAL_PORT_2 -1
|
||||
//#define BAUDRATE_2 250000 // Enable to override BAUDRATE
|
||||
//#define BAUDRATE_2 250000 // :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] Enable to override BAUDRATE
|
||||
|
||||
/**
|
||||
* Select a third serial port on the board to use for communication with the host.
|
||||
|
|
@ -130,7 +131,7 @@
|
|||
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
//#define SERIAL_PORT_3 1
|
||||
//#define BAUDRATE_3 250000 // Enable to override BAUDRATE
|
||||
//#define BAUDRATE_3 250000 // :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] Enable to override BAUDRATE
|
||||
|
||||
// Enable the Bluetooth serial interface on AT90USB devices
|
||||
//#define BLUETOOTH
|
||||
|
|
@ -389,7 +390,7 @@
|
|||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
// @section psu control
|
||||
|
||||
/**
|
||||
* Power Supply Control
|
||||
|
|
@ -625,6 +626,8 @@
|
|||
//============================= PID Settings ================================
|
||||
//===========================================================================
|
||||
|
||||
// @section hotend temp
|
||||
|
||||
// Enable PIDTEMP for PID control or MPCTEMP for Predictive Model.
|
||||
// temperature control. Disable both for bang-bang heating.
|
||||
#define PIDTEMP // See the PID Tuning Guide at https://reprap.org/wiki/PID_Tuning
|
||||
|
|
@ -635,7 +638,8 @@
|
|||
#define PID_K1 0.95 // Smoothing factor within any PID loop
|
||||
|
||||
#if ENABLED(PIDTEMP)
|
||||
//#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders)
|
||||
//#define PID_DEBUG // Print PID debug data to the serial port. Use 'M303 D' to toggle activation.
|
||||
//#define PID_PARAMS_PER_HOTEND // Use separate PID parameters for each extruder (useful for mismatched extruders)
|
||||
// Set/get with G-code: M301 E[extruder number, 0-2]
|
||||
|
||||
#if ENABLED(PID_PARAMS_PER_HOTEND)
|
||||
|
|
@ -657,6 +661,7 @@
|
|||
* Use a physical model of the hotend to control temperature. When configured correctly
|
||||
* this gives better responsiveness and stability than PID and it also removes the need
|
||||
* for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model.
|
||||
* @section mpctemp
|
||||
*/
|
||||
#if ENABLED(MPCTEMP)
|
||||
//#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash)
|
||||
|
|
@ -724,7 +729,7 @@
|
|||
|
||||
#if ENABLED(PIDTEMPBED)
|
||||
//#define MIN_BED_POWER 0
|
||||
//#define PID_BED_DEBUG // Sends debug data to the serial port.
|
||||
//#define PID_BED_DEBUG // Print Bed PID debug data to the serial port.
|
||||
|
||||
// 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
|
||||
// from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
|
||||
|
|
@ -752,6 +757,7 @@
|
|||
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 200W
|
||||
* heater. If your configuration is significantly different than this and you don't understand
|
||||
* the issues involved, don't use chamber PID until someone else verifies that your hardware works.
|
||||
* @section chamber temp
|
||||
*/
|
||||
//#define PIDTEMPCHAMBER
|
||||
//#define CHAMBER_LIMIT_SWITCHING
|
||||
|
|
@ -766,7 +772,7 @@
|
|||
|
||||
#if ENABLED(PIDTEMPCHAMBER)
|
||||
#define MIN_CHAMBER_POWER 0
|
||||
//#define PID_CHAMBER_DEBUG // Sends debug data to the serial port.
|
||||
//#define PID_CHAMBER_DEBUG // Print Chamber PID debug data to the serial port.
|
||||
|
||||
// Lasko "MyHeat Personal Heater" (200w) modified with a Fotek SSR-10DA to control only the heating element
|
||||
// and placed inside the small Creality printer enclosure tent.
|
||||
|
|
@ -780,7 +786,6 @@
|
|||
#endif // PIDTEMPCHAMBER
|
||||
|
||||
#if ANY(PIDTEMP, PIDTEMPBED, PIDTEMPCHAMBER)
|
||||
//#define PID_DEBUG // Sends debug data to the serial port. Use 'M303 D' to toggle activation.
|
||||
//#define PID_OPENLOOP // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX
|
||||
//#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay
|
||||
#define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature
|
||||
|
|
@ -790,7 +795,7 @@
|
|||
//#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of flash)
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
// @section safety
|
||||
|
||||
/**
|
||||
* Prevent extrusion if the temperature is below EXTRUDE_MINTEMP.
|
||||
|
|
@ -858,6 +863,8 @@
|
|||
#define POLAR_SEGMENTS_PER_SECOND 5
|
||||
#endif
|
||||
|
||||
// @section delta
|
||||
|
||||
// Enable for DELTA kinematics and configure below
|
||||
//#define DELTA
|
||||
#if ENABLED(DELTA)
|
||||
|
|
@ -917,6 +924,8 @@
|
|||
//#define DELTA_DIAGONAL_ROD_TRIM_TOWER { 0.0, 0.0, 0.0 }
|
||||
#endif
|
||||
|
||||
// @section scara
|
||||
|
||||
/**
|
||||
* MORGAN_SCARA was developed by QHARLEY in South Africa in 2012-2013.
|
||||
* Implemented and slightly reworked by JCERNY in June, 2014.
|
||||
|
|
@ -960,6 +969,8 @@
|
|||
|
||||
#endif
|
||||
|
||||
// @section tpara
|
||||
|
||||
// Enable for TPARA kinematics and configure below
|
||||
//#define AXEL_TPARA
|
||||
#if ENABLED(AXEL_TPARA)
|
||||
|
|
@ -986,6 +997,8 @@
|
|||
#define PSI_HOMING_OFFSET 0
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
|
|
@ -997,7 +1010,7 @@
|
|||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
||||
// @section homing
|
||||
// @section endstops
|
||||
|
||||
// Specify here all the endstop connectors that are connected to any endstop or probe.
|
||||
// Almost all printers will be using one per axis. Probes will use one or more of the
|
||||
|
|
@ -1667,7 +1680,7 @@
|
|||
//#define V_HOME_DIR -1
|
||||
//#define W_HOME_DIR -1
|
||||
|
||||
// @section machine
|
||||
// @section geometry
|
||||
|
||||
// The size of the printable area
|
||||
#define X_BED_SIZE 200
|
||||
|
|
@ -2127,7 +2140,7 @@
|
|||
//============================= Additional Features ===========================
|
||||
//=============================================================================
|
||||
|
||||
// @section extras
|
||||
// @section eeprom
|
||||
|
||||
/**
|
||||
* EEPROM
|
||||
|
|
@ -2147,6 +2160,8 @@
|
|||
//#define EEPROM_INIT_NOW // Init EEPROM on first boot after a new build.
|
||||
#endif
|
||||
|
||||
// @section host
|
||||
|
||||
//
|
||||
// Host Keepalive
|
||||
//
|
||||
|
|
@ -2157,6 +2172,8 @@
|
|||
#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113.
|
||||
#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating
|
||||
|
||||
// @section units
|
||||
|
||||
//
|
||||
// G20/G21 Inch mode support
|
||||
//
|
||||
|
|
@ -2184,6 +2201,8 @@
|
|||
#define PREHEAT_2_TEMP_CHAMBER 35
|
||||
#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
|
||||
|
||||
// @section motion
|
||||
|
||||
/**
|
||||
* Nozzle Park
|
||||
*
|
||||
|
|
@ -2282,6 +2301,8 @@
|
|||
|
||||
#endif
|
||||
|
||||
// @section host
|
||||
|
||||
/**
|
||||
* Print Job Timer
|
||||
*
|
||||
|
|
@ -2308,6 +2329,8 @@
|
|||
*/
|
||||
#define PRINTJOB_TIMER_AUTOSTART
|
||||
|
||||
// @section stats
|
||||
|
||||
/**
|
||||
* Print Counter
|
||||
*
|
||||
|
|
@ -2325,6 +2348,8 @@
|
|||
#define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print
|
||||
#endif
|
||||
|
||||
// @section security
|
||||
|
||||
/**
|
||||
* Password
|
||||
*
|
||||
|
|
@ -2360,7 +2385,7 @@
|
|||
//============================= LCD and SD support ============================
|
||||
//=============================================================================
|
||||
|
||||
// @section lcd
|
||||
// @section interface
|
||||
|
||||
/**
|
||||
* LCD LANGUAGE
|
||||
|
|
@ -2516,6 +2541,7 @@
|
|||
//======================== LCD / Controller Selection =========================
|
||||
//======================== (Character-based LCDs) =========================
|
||||
//=============================================================================
|
||||
// @section lcd
|
||||
|
||||
//
|
||||
// RepRapDiscount Smart Controller.
|
||||
|
|
@ -3161,7 +3187,7 @@
|
|||
//=============================== Extra Features ==============================
|
||||
//=============================================================================
|
||||
|
||||
// @section extras
|
||||
// @section fans
|
||||
|
||||
// Set number of user-controlled fans. Disable to use all board-defined fans.
|
||||
// :[1,2,3,4,5,6,7,8]
|
||||
|
|
@ -3185,14 +3211,18 @@
|
|||
// duty cycle is attained.
|
||||
//#define SOFT_PWM_DITHER
|
||||
|
||||
// @section extras
|
||||
|
||||
// Support for the BariCUDA Paste Extruder
|
||||
//#define BARICUDA
|
||||
|
||||
// @section lights
|
||||
|
||||
// Temperature status LEDs that display the hotend and bed temperature.
|
||||
// If all hotends, bed temperature, and target temperature are under 54C
|
||||
// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis)
|
||||
//#define TEMP_STAT_LEDS
|
||||
|
||||
// Support for the BariCUDA Paste Extruder
|
||||
//#define BARICUDA
|
||||
|
||||
// Support for BlinkM/CyzRgb
|
||||
//#define BLINKM
|
||||
|
||||
|
|
@ -3278,6 +3308,8 @@
|
|||
#define PRINTER_EVENT_LEDS
|
||||
#endif
|
||||
|
||||
// @section servos
|
||||
|
||||
/**
|
||||
* Number of servos
|
||||
*
|
||||
|
|
|
|||
|
|
@ -32,6 +32,24 @@
|
|||
*/
|
||||
#define CONFIGURATION_ADV_H_VERSION 02010100
|
||||
|
||||
// @section develop
|
||||
|
||||
/**
|
||||
* Configuration Dump to JSON and INI format
|
||||
*
|
||||
* Dump the configuration as part of the build. (See signature.py)
|
||||
* Output files are saved with the build (e.g., .pio/build/mega2560).
|
||||
*
|
||||
* See `build_all_examples --ini` as an example of config.ini archiving.
|
||||
*
|
||||
* 1 = marlin_config.json - Dictionary containing the configuration.
|
||||
* This file is also generated for CONFIGURATION_EMBEDDING.
|
||||
* 2 = config.ini - File format for PlatformIO preprocessing.
|
||||
* 3 = schema.json - The entire configuration schema. (13 = pattern groups)
|
||||
* 4 = schema.yml - The entire configuration schema.
|
||||
*/
|
||||
//#define CONFIG_DUMP // :[1:'JSON', 2:'config.ini', 3:'schema.json', 4:'schema.yml']
|
||||
|
||||
//===========================================================================
|
||||
//============================= Thermal Settings ============================
|
||||
//===========================================================================
|
||||
|
|
@ -2558,6 +2576,8 @@
|
|||
#endif
|
||||
#endif // HAS_MULTI_EXTRUDER
|
||||
|
||||
// @section advanced pause
|
||||
|
||||
/**
|
||||
* Advanced Pause for Filament Change
|
||||
* - Adds the G-code M600 Filament Change to initiate a filament change.
|
||||
|
|
@ -2616,13 +2636,12 @@
|
|||
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
|
||||
#endif
|
||||
|
||||
// @section tmc
|
||||
|
||||
/**
|
||||
* TMC26X Stepper Driver options
|
||||
*
|
||||
* The TMC26XStepper library is required for this stepper driver.
|
||||
* https://github.com/trinamic/TMC26XStepper
|
||||
* @section tmc/tmc26x
|
||||
*/
|
||||
#if HAS_DRIVER(TMC26X)
|
||||
|
||||
|
|
@ -2760,8 +2779,6 @@
|
|||
|
||||
#endif // TMC26X
|
||||
|
||||
// @section tmc_smart
|
||||
|
||||
/**
|
||||
* To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode
|
||||
* connect your SPI pins to the hardware SPI interface on your board and define
|
||||
|
|
@ -2777,6 +2794,7 @@
|
|||
*
|
||||
* TMCStepper library is required to use TMC stepper drivers.
|
||||
* https://github.com/teemuatlut/TMCStepper
|
||||
* @section tmc/config
|
||||
*/
|
||||
#if HAS_TRINAMIC_CONFIG
|
||||
|
||||
|
|
@ -3000,6 +3018,8 @@
|
|||
//#define E7_HOLD_MULTIPLIER 0.5
|
||||
#endif
|
||||
|
||||
// @section tmc/spi
|
||||
|
||||
/**
|
||||
* Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here.
|
||||
* The default pins can be found in your board's pins file.
|
||||
|
|
@ -3037,6 +3057,8 @@
|
|||
//#define TMC_SW_MISO -1
|
||||
//#define TMC_SW_SCK -1
|
||||
|
||||
// @section tmc/serial
|
||||
|
||||
/**
|
||||
* Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
|
||||
* Set the address using jumpers on pins MS1 and MS2.
|
||||
|
|
@ -3072,6 +3094,8 @@
|
|||
//#define E6_SLAVE_ADDRESS 0
|
||||
//#define E7_SLAVE_ADDRESS 0
|
||||
|
||||
// @section tmc/smart
|
||||
|
||||
/**
|
||||
* Software enable
|
||||
*
|
||||
|
|
@ -3080,6 +3104,8 @@
|
|||
*/
|
||||
//#define SOFTWARE_DRIVER_ENABLE
|
||||
|
||||
// @section tmc/stealthchop
|
||||
|
||||
/**
|
||||
* TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only
|
||||
* Use Trinamic's ultra quiet stepping mode.
|
||||
|
|
@ -3134,6 +3160,8 @@
|
|||
//#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
|
||||
//#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
|
||||
|
||||
// @section tmc/status
|
||||
|
||||
/**
|
||||
* Monitor Trinamic drivers
|
||||
* for error conditions like overtemperature and short to ground.
|
||||
|
|
@ -3153,6 +3181,8 @@
|
|||
#define STOP_ON_ERROR
|
||||
#endif
|
||||
|
||||
// @section tmc/hybrid
|
||||
|
||||
/**
|
||||
* TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only
|
||||
* The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD.
|
||||
|
|
@ -3209,6 +3239,7 @@
|
|||
* homing and adds a guard period for endstop triggering.
|
||||
*
|
||||
* Comment *_STALL_SENSITIVITY to disable sensorless homing for that axis.
|
||||
* @section tmc/stallguard
|
||||
*/
|
||||
//#define SENSORLESS_HOMING // StallGuard capable drivers only
|
||||
|
||||
|
|
@ -3232,6 +3263,8 @@
|
|||
//#define IMPROVE_HOMING_RELIABILITY
|
||||
#endif
|
||||
|
||||
// @section tmc/config
|
||||
|
||||
/**
|
||||
* TMC Homing stepper phase.
|
||||
*
|
||||
|
|
@ -3312,7 +3345,7 @@
|
|||
#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave
|
||||
#endif
|
||||
|
||||
// @section extras
|
||||
// @section photo
|
||||
|
||||
/**
|
||||
* Photo G-code
|
||||
|
|
@ -3355,6 +3388,8 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
// @section cnc
|
||||
|
||||
/**
|
||||
* Spindle & Laser control
|
||||
*
|
||||
|
|
@ -3559,6 +3594,8 @@
|
|||
#define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
|
||||
#endif
|
||||
|
||||
// @section filament width
|
||||
|
||||
/**
|
||||
* Filament Width Sensor
|
||||
*
|
||||
|
|
@ -3592,6 +3629,8 @@
|
|||
//#define FILAMENT_LCD_DISPLAY
|
||||
#endif
|
||||
|
||||
// @section power
|
||||
|
||||
/**
|
||||
* Power Monitor
|
||||
* Monitor voltage (V) and/or current (A), and -when possible- power (W)
|
||||
|
|
@ -3615,6 +3654,8 @@
|
|||
#define POWER_MONITOR_VOLTAGE_OFFSET 0 // Offset (in volts) applied to the calculated voltage
|
||||
#endif
|
||||
|
||||
// @section safety
|
||||
|
||||
/**
|
||||
* Stepper Driver Anti-SNAFU Protection
|
||||
*
|
||||
|
|
@ -3624,6 +3665,8 @@
|
|||
*/
|
||||
//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
|
||||
|
||||
// @section cnc
|
||||
|
||||
/**
|
||||
* CNC Coordinate Systems
|
||||
*
|
||||
|
|
@ -3640,6 +3683,8 @@
|
|||
*/
|
||||
//#define CNC_DRILLING_CYCLE
|
||||
|
||||
// @section reporting
|
||||
|
||||
/**
|
||||
* Auto-report fan speed with M123 S<seconds>
|
||||
* Requires fans with tachometer pins
|
||||
|
|
@ -3667,6 +3712,8 @@
|
|||
//#define M115_GEOMETRY_REPORT
|
||||
#endif
|
||||
|
||||
// @section security
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
|
|
@ -3674,6 +3721,8 @@
|
|||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
// @section volumetrics
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
|
|
@ -3702,14 +3751,7 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Enable this option for a leaner build of Marlin that removes all
|
||||
* workspace offsets, simplifying coordinate transformations, leveling, etc.
|
||||
*
|
||||
* - M206 and M428 are disabled.
|
||||
* - G92 will revert to its behavior from Marlin 1.0.
|
||||
*/
|
||||
//#define NO_WORKSPACE_OFFSETS
|
||||
// @section reporting
|
||||
|
||||
// Extra options for the M114 "Current Position" report
|
||||
//#define M114_DETAIL // Use 'M114` for details to check planner calculations
|
||||
|
|
@ -3718,6 +3760,8 @@
|
|||
|
||||
//#define REPORT_FAN_CHANGE // Report the new fan speed when changed by M106 (and others)
|
||||
|
||||
// @section gcode
|
||||
|
||||
/**
|
||||
* Spend 28 bytes of SRAM to optimize the G-code parser
|
||||
*/
|
||||
|
|
@ -3735,6 +3779,15 @@
|
|||
|
||||
//#define REPETIER_GCODE_M360 // Add commands originally from Repetier FW
|
||||
|
||||
/**
|
||||
* Enable this option for a leaner build of Marlin that removes all
|
||||
* workspace offsets, simplifying coordinate transformations, leveling, etc.
|
||||
*
|
||||
* - M206 and M428 are disabled.
|
||||
* - G92 will revert to its behavior from Marlin 1.0.
|
||||
*/
|
||||
//#define NO_WORKSPACE_OFFSETS
|
||||
|
||||
/**
|
||||
* CNC G-code options
|
||||
* Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.
|
||||
|
|
@ -3751,6 +3804,8 @@
|
|||
#endif
|
||||
//#define G0_ANGULAR_FEEDRATE 2700 // (°/min)
|
||||
|
||||
// @section gcode
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
|
|
@ -3775,6 +3830,8 @@
|
|||
* Up to 25 may be defined, but the actual number is LCD-dependent.
|
||||
*/
|
||||
|
||||
// @section custom main menu
|
||||
|
||||
// Custom Menu: Main Menu
|
||||
//#define CUSTOM_MENU_MAIN
|
||||
#if ENABLED(CUSTOM_MENU_MAIN)
|
||||
|
|
@ -3805,6 +3862,8 @@
|
|||
//#define MAIN_MENU_ITEM_5_CONFIRM
|
||||
#endif
|
||||
|
||||
// @section custom config menu
|
||||
|
||||
// Custom Menu: Configuration Menu
|
||||
//#define CUSTOM_MENU_CONFIG
|
||||
#if ENABLED(CUSTOM_MENU_CONFIG)
|
||||
|
|
@ -3835,6 +3894,8 @@
|
|||
//#define CONFIG_MENU_ITEM_5_CONFIRM
|
||||
#endif
|
||||
|
||||
// @section custom buttons
|
||||
|
||||
/**
|
||||
* User-defined buttons to run custom G-code.
|
||||
* Up to 25 may be defined.
|
||||
|
|
@ -3866,6 +3927,8 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
// @section host
|
||||
|
||||
/**
|
||||
* Host Action Commands
|
||||
*
|
||||
|
|
@ -3891,6 +3954,8 @@
|
|||
//#define HOST_SHUTDOWN_MENU_ITEM // Add a menu item that tells the host to shut down
|
||||
#endif
|
||||
|
||||
// @section extras
|
||||
|
||||
/**
|
||||
* Cancel Objects
|
||||
*
|
||||
|
|
@ -3912,6 +3977,7 @@
|
|||
* Alternative Supplier: https://reliabuild3d.com/
|
||||
*
|
||||
* Reliabuild encoders have been modified to improve reliability.
|
||||
* @section i2c encoders
|
||||
*/
|
||||
|
||||
//#define I2C_POSITION_ENCODERS
|
||||
|
|
@ -3983,6 +4049,7 @@
|
|||
|
||||
/**
|
||||
* Analog Joystick(s)
|
||||
* @section joystick
|
||||
*/
|
||||
//#define JOYSTICK
|
||||
#if ENABLED(JOYSTICK)
|
||||
|
|
@ -4007,6 +4074,7 @@
|
|||
* Modern replacement for the Prusa TMC_Z_CALIBRATION.
|
||||
* Adds capability to work with any adjustable current drivers.
|
||||
* Implemented as G34 because M915 is deprecated.
|
||||
* @section calibrate
|
||||
*/
|
||||
//#define MECHANICAL_GANTRY_CALIBRATION
|
||||
#if ENABLED(MECHANICAL_GANTRY_CALIBRATION)
|
||||
|
|
@ -4024,6 +4092,7 @@
|
|||
/**
|
||||
* Instant freeze / unfreeze functionality
|
||||
* Potentially useful for emergency stop that allows being resumed.
|
||||
* @section interface
|
||||
*/
|
||||
//#define FREEZE_FEATURE
|
||||
#if ENABLED(FREEZE_FEATURE)
|
||||
|
|
@ -4036,6 +4105,7 @@
|
|||
*
|
||||
* Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display.
|
||||
* Requires 3 signal wires. Some useful debug options are included to demonstrate its usage.
|
||||
* @section debug matrix
|
||||
*/
|
||||
//#define MAX7219_DEBUG
|
||||
#if ENABLED(MAX7219_DEBUG)
|
||||
|
|
@ -4074,6 +4144,7 @@
|
|||
* Support for Synchronized Z moves when used with NanoDLP. G0/G1 axis moves will
|
||||
* output a "Z_move_comp" string to enable synchronization with DLP projector exposure.
|
||||
* This feature allows you to use [[WaitForDoneMessage]] instead of M400 commands.
|
||||
* @section nanodlp
|
||||
*/
|
||||
//#define NANODLP_Z_SYNC
|
||||
#if ENABLED(NANODLP_Z_SYNC)
|
||||
|
|
@ -4082,6 +4153,7 @@
|
|||
|
||||
/**
|
||||
* Ethernet. Use M552 to enable and set the IP address.
|
||||
* @section network
|
||||
*/
|
||||
#if HAS_ETHERNET
|
||||
#define MAC_ADDRESS { 0xDE, 0xAD, 0xBE, 0xEF, 0xF0, 0x0D } // A MAC address unique to your network
|
||||
|
|
@ -4109,6 +4181,8 @@
|
|||
//#include "Configuration_Secure.h" // External file with WiFi SSID / Password
|
||||
#endif
|
||||
|
||||
// @section multi-material
|
||||
|
||||
/**
|
||||
* Průša Multi-Material Unit (MMU)
|
||||
* Enable in Configuration.h
|
||||
|
|
@ -4216,6 +4290,7 @@
|
|||
|
||||
/**
|
||||
* Advanced Print Counter settings
|
||||
* @section stats
|
||||
*/
|
||||
#if ENABLED(PRINTCOUNTER)
|
||||
#define SERVICE_WARNING_BUZZES 3
|
||||
|
|
|
|||
|
|
@ -114,6 +114,7 @@
|
|||
* :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
|
||||
*/
|
||||
#define BAUDRATE 250000
|
||||
|
||||
//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate
|
||||
|
||||
/**
|
||||
|
|
@ -122,7 +123,7 @@
|
|||
* :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
//#define SERIAL_PORT_2 -1
|
||||
//#define BAUDRATE_2 250000 // Enable to override BAUDRATE
|
||||
//#define BAUDRATE_2 250000 // :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] Enable to override BAUDRATE
|
||||
|
||||
/**
|
||||
* Select a third serial port on the board to use for communication with the host.
|
||||
|
|
@ -130,7 +131,7 @@
|
|||
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
//#define SERIAL_PORT_3 1
|
||||
//#define BAUDRATE_3 250000 // Enable to override BAUDRATE
|
||||
//#define BAUDRATE_3 250000 // :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] Enable to override BAUDRATE
|
||||
|
||||
// Enable the Bluetooth serial interface on AT90USB devices
|
||||
//#define BLUETOOTH
|
||||
|
|
@ -389,7 +390,7 @@
|
|||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
// @section psu control
|
||||
|
||||
/**
|
||||
* Power Supply Control
|
||||
|
|
@ -625,6 +626,8 @@
|
|||
//============================= PID Settings ================================
|
||||
//===========================================================================
|
||||
|
||||
// @section hotend temp
|
||||
|
||||
// Enable PIDTEMP for PID control or MPCTEMP for Predictive Model.
|
||||
// temperature control. Disable both for bang-bang heating.
|
||||
#define PIDTEMP // See the PID Tuning Guide at https://reprap.org/wiki/PID_Tuning
|
||||
|
|
@ -635,7 +638,8 @@
|
|||
#define PID_K1 0.95 // Smoothing factor within any PID loop
|
||||
|
||||
#if ENABLED(PIDTEMP)
|
||||
//#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders)
|
||||
//#define PID_DEBUG // Print PID debug data to the serial port. Use 'M303 D' to toggle activation.
|
||||
//#define PID_PARAMS_PER_HOTEND // Use separate PID parameters for each extruder (useful for mismatched extruders)
|
||||
// Set/get with G-code: M301 E[extruder number, 0-2]
|
||||
|
||||
#if ENABLED(PID_PARAMS_PER_HOTEND)
|
||||
|
|
@ -663,6 +667,7 @@
|
|||
* Use a physical model of the hotend to control temperature. When configured correctly
|
||||
* this gives better responsiveness and stability than PID and it also removes the need
|
||||
* for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model.
|
||||
* @section mpctemp
|
||||
*/
|
||||
#if ENABLED(MPCTEMP)
|
||||
//#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash)
|
||||
|
|
@ -730,7 +735,7 @@
|
|||
|
||||
#if ENABLED(PIDTEMPBED)
|
||||
//#define MIN_BED_POWER 0
|
||||
//#define PID_BED_DEBUG // Sends debug data to the serial port.
|
||||
//#define PID_BED_DEBUG // Print Bed PID debug data to the serial port.
|
||||
|
||||
// 12v (120 watt?) MK2a PCB Heatbed into 4mm borosilicate (Geeetech Průša i3 Pro, Pro/B/C/X)
|
||||
#define DEFAULT_bedKp 10.00
|
||||
|
|
@ -757,6 +762,7 @@
|
|||
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 200W
|
||||
* heater. If your configuration is significantly different than this and you don't understand
|
||||
* the issues involved, don't use chamber PID until someone else verifies that your hardware works.
|
||||
* @section chamber temp
|
||||
*/
|
||||
//#define PIDTEMPCHAMBER
|
||||
//#define CHAMBER_LIMIT_SWITCHING
|
||||
|
|
@ -771,7 +777,7 @@
|
|||
|
||||
#if ENABLED(PIDTEMPCHAMBER)
|
||||
#define MIN_CHAMBER_POWER 0
|
||||
//#define PID_CHAMBER_DEBUG // Sends debug data to the serial port.
|
||||
//#define PID_CHAMBER_DEBUG // Print Chamber PID debug data to the serial port.
|
||||
|
||||
// Lasko "MyHeat Personal Heater" (200w) modified with a Fotek SSR-10DA to control only the heating element
|
||||
// and placed inside the small Creality printer enclosure tent.
|
||||
|
|
@ -785,7 +791,6 @@
|
|||
#endif // PIDTEMPCHAMBER
|
||||
|
||||
#if ANY(PIDTEMP, PIDTEMPBED, PIDTEMPCHAMBER)
|
||||
//#define PID_DEBUG // Sends debug data to the serial port. Use 'M303 D' to toggle activation.
|
||||
//#define PID_OPENLOOP // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX
|
||||
//#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay
|
||||
#define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature
|
||||
|
|
@ -795,7 +800,7 @@
|
|||
//#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of flash)
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
// @section safety
|
||||
|
||||
/**
|
||||
* Prevent extrusion if the temperature is below EXTRUDE_MINTEMP.
|
||||
|
|
@ -863,6 +868,8 @@
|
|||
#define POLAR_SEGMENTS_PER_SECOND 5
|
||||
#endif
|
||||
|
||||
// @section delta
|
||||
|
||||
// Enable for DELTA kinematics and configure below
|
||||
//#define DELTA
|
||||
#if ENABLED(DELTA)
|
||||
|
|
@ -922,6 +929,8 @@
|
|||
//#define DELTA_DIAGONAL_ROD_TRIM_TOWER { 0.0, 0.0, 0.0 }
|
||||
#endif
|
||||
|
||||
// @section scara
|
||||
|
||||
/**
|
||||
* MORGAN_SCARA was developed by QHARLEY in South Africa in 2012-2013.
|
||||
* Implemented and slightly reworked by JCERNY in June, 2014.
|
||||
|
|
@ -965,6 +974,8 @@
|
|||
|
||||
#endif
|
||||
|
||||
// @section tpara
|
||||
|
||||
// Enable for TPARA kinematics and configure below
|
||||
//#define AXEL_TPARA
|
||||
#if ENABLED(AXEL_TPARA)
|
||||
|
|
@ -991,6 +1002,8 @@
|
|||
#define PSI_HOMING_OFFSET 0
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
|
|
@ -1002,7 +1015,7 @@
|
|||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
||||
// @section homing
|
||||
// @section endstops
|
||||
|
||||
// Specify here all the endstop connectors that are connected to any endstop or probe.
|
||||
// Almost all printers will be using one per axis. Probes will use one or more of the
|
||||
|
|
@ -1677,7 +1690,7 @@
|
|||
//#define V_HOME_DIR -1
|
||||
//#define W_HOME_DIR -1
|
||||
|
||||
// @section machine
|
||||
// @section geometry
|
||||
|
||||
// The size of the printable area
|
||||
#define X_BED_SIZE 220
|
||||
|
|
@ -2137,7 +2150,7 @@
|
|||
//============================= Additional Features ===========================
|
||||
//=============================================================================
|
||||
|
||||
// @section extras
|
||||
// @section eeprom
|
||||
|
||||
/**
|
||||
* EEPROM
|
||||
|
|
@ -2157,6 +2170,8 @@
|
|||
//#define EEPROM_INIT_NOW // Init EEPROM on first boot after a new build.
|
||||
#endif
|
||||
|
||||
// @section host
|
||||
|
||||
//
|
||||
// Host Keepalive
|
||||
//
|
||||
|
|
@ -2167,6 +2182,8 @@
|
|||
#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113.
|
||||
#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating
|
||||
|
||||
// @section units
|
||||
|
||||
//
|
||||
// G20/G21 Inch mode support
|
||||
//
|
||||
|
|
@ -2194,6 +2211,8 @@
|
|||
#define PREHEAT_2_TEMP_CHAMBER 35
|
||||
#define PREHEAT_2_FAN_SPEED 170 // Value from 0 to 255
|
||||
|
||||
// @section motion
|
||||
|
||||
/**
|
||||
* Nozzle Park
|
||||
*
|
||||
|
|
@ -2292,6 +2311,8 @@
|
|||
|
||||
#endif
|
||||
|
||||
// @section host
|
||||
|
||||
/**
|
||||
* Print Job Timer
|
||||
*
|
||||
|
|
@ -2318,6 +2339,8 @@
|
|||
*/
|
||||
#define PRINTJOB_TIMER_AUTOSTART
|
||||
|
||||
// @section stats
|
||||
|
||||
/**
|
||||
* Print Counter
|
||||
*
|
||||
|
|
@ -2335,6 +2358,8 @@
|
|||
#define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print
|
||||
#endif
|
||||
|
||||
// @section security
|
||||
|
||||
/**
|
||||
* Password
|
||||
*
|
||||
|
|
@ -2370,7 +2395,7 @@
|
|||
//============================= LCD and SD support ============================
|
||||
//=============================================================================
|
||||
|
||||
// @section lcd
|
||||
// @section interface
|
||||
|
||||
/**
|
||||
* LCD LANGUAGE
|
||||
|
|
@ -2526,6 +2551,7 @@
|
|||
//======================== LCD / Controller Selection =========================
|
||||
//======================== (Character-based LCDs) =========================
|
||||
//=============================================================================
|
||||
// @section lcd
|
||||
|
||||
//
|
||||
// RepRapDiscount Smart Controller.
|
||||
|
|
@ -3171,7 +3197,7 @@
|
|||
//=============================== Extra Features ==============================
|
||||
//=============================================================================
|
||||
|
||||
// @section extras
|
||||
// @section fans
|
||||
|
||||
// Set number of user-controlled fans. Disable to use all board-defined fans.
|
||||
// :[1,2,3,4,5,6,7,8]
|
||||
|
|
@ -3195,14 +3221,18 @@
|
|||
// duty cycle is attained.
|
||||
//#define SOFT_PWM_DITHER
|
||||
|
||||
// @section extras
|
||||
|
||||
// Support for the BariCUDA Paste Extruder
|
||||
//#define BARICUDA
|
||||
|
||||
// @section lights
|
||||
|
||||
// Temperature status LEDs that display the hotend and bed temperature.
|
||||
// If all hotends, bed temperature, and target temperature are under 54C
|
||||
// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis)
|
||||
//#define TEMP_STAT_LEDS
|
||||
|
||||
// Support for the BariCUDA Paste Extruder
|
||||
//#define BARICUDA
|
||||
|
||||
// Support for BlinkM/CyzRgb
|
||||
//#define BLINKM
|
||||
|
||||
|
|
@ -3288,6 +3318,8 @@
|
|||
#define PRINTER_EVENT_LEDS
|
||||
#endif
|
||||
|
||||
// @section servos
|
||||
|
||||
/**
|
||||
* Number of servos
|
||||
*
|
||||
|
|
|
|||
|
|
@ -32,6 +32,24 @@
|
|||
*/
|
||||
#define CONFIGURATION_ADV_H_VERSION 02010100
|
||||
|
||||
// @section develop
|
||||
|
||||
/**
|
||||
* Configuration Dump to JSON and INI format
|
||||
*
|
||||
* Dump the configuration as part of the build. (See signature.py)
|
||||
* Output files are saved with the build (e.g., .pio/build/mega2560).
|
||||
*
|
||||
* See `build_all_examples --ini` as an example of config.ini archiving.
|
||||
*
|
||||
* 1 = marlin_config.json - Dictionary containing the configuration.
|
||||
* This file is also generated for CONFIGURATION_EMBEDDING.
|
||||
* 2 = config.ini - File format for PlatformIO preprocessing.
|
||||
* 3 = schema.json - The entire configuration schema. (13 = pattern groups)
|
||||
* 4 = schema.yml - The entire configuration schema.
|
||||
*/
|
||||
//#define CONFIG_DUMP // :[1:'JSON', 2:'config.ini', 3:'schema.json', 4:'schema.yml']
|
||||
|
||||
//===========================================================================
|
||||
//============================= Thermal Settings ============================
|
||||
//===========================================================================
|
||||
|
|
@ -2558,6 +2576,8 @@
|
|||
#endif
|
||||
#endif // HAS_MULTI_EXTRUDER
|
||||
|
||||
// @section advanced pause
|
||||
|
||||
/**
|
||||
* Advanced Pause for Filament Change
|
||||
* - Adds the G-code M600 Filament Change to initiate a filament change.
|
||||
|
|
@ -2616,13 +2636,12 @@
|
|||
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
|
||||
#endif
|
||||
|
||||
// @section tmc
|
||||
|
||||
/**
|
||||
* TMC26X Stepper Driver options
|
||||
*
|
||||
* The TMC26XStepper library is required for this stepper driver.
|
||||
* https://github.com/trinamic/TMC26XStepper
|
||||
* @section tmc/tmc26x
|
||||
*/
|
||||
#if HAS_DRIVER(TMC26X)
|
||||
|
||||
|
|
@ -2760,8 +2779,6 @@
|
|||
|
||||
#endif // TMC26X
|
||||
|
||||
// @section tmc_smart
|
||||
|
||||
/**
|
||||
* To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode
|
||||
* connect your SPI pins to the hardware SPI interface on your board and define
|
||||
|
|
@ -2777,6 +2794,7 @@
|
|||
*
|
||||
* TMCStepper library is required to use TMC stepper drivers.
|
||||
* https://github.com/teemuatlut/TMCStepper
|
||||
* @section tmc/config
|
||||
*/
|
||||
#if HAS_TRINAMIC_CONFIG
|
||||
|
||||
|
|
@ -3000,6 +3018,8 @@
|
|||
//#define E7_HOLD_MULTIPLIER 0.5
|
||||
#endif
|
||||
|
||||
// @section tmc/spi
|
||||
|
||||
/**
|
||||
* Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here.
|
||||
* The default pins can be found in your board's pins file.
|
||||
|
|
@ -3037,6 +3057,8 @@
|
|||
//#define TMC_SW_MISO -1
|
||||
//#define TMC_SW_SCK -1
|
||||
|
||||
// @section tmc/serial
|
||||
|
||||
/**
|
||||
* Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
|
||||
* Set the address using jumpers on pins MS1 and MS2.
|
||||
|
|
@ -3072,6 +3094,8 @@
|
|||
//#define E6_SLAVE_ADDRESS 0
|
||||
//#define E7_SLAVE_ADDRESS 0
|
||||
|
||||
// @section tmc/smart
|
||||
|
||||
/**
|
||||
* Software enable
|
||||
*
|
||||
|
|
@ -3080,6 +3104,8 @@
|
|||
*/
|
||||
//#define SOFTWARE_DRIVER_ENABLE
|
||||
|
||||
// @section tmc/stealthchop
|
||||
|
||||
/**
|
||||
* TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only
|
||||
* Use Trinamic's ultra quiet stepping mode.
|
||||
|
|
@ -3134,6 +3160,8 @@
|
|||
//#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
|
||||
//#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
|
||||
|
||||
// @section tmc/status
|
||||
|
||||
/**
|
||||
* Monitor Trinamic drivers
|
||||
* for error conditions like overtemperature and short to ground.
|
||||
|
|
@ -3153,6 +3181,8 @@
|
|||
#define STOP_ON_ERROR
|
||||
#endif
|
||||
|
||||
// @section tmc/hybrid
|
||||
|
||||
/**
|
||||
* TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only
|
||||
* The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD.
|
||||
|
|
@ -3209,6 +3239,7 @@
|
|||
* homing and adds a guard period for endstop triggering.
|
||||
*
|
||||
* Comment *_STALL_SENSITIVITY to disable sensorless homing for that axis.
|
||||
* @section tmc/stallguard
|
||||
*/
|
||||
//#define SENSORLESS_HOMING // StallGuard capable drivers only
|
||||
|
||||
|
|
@ -3232,6 +3263,8 @@
|
|||
//#define IMPROVE_HOMING_RELIABILITY
|
||||
#endif
|
||||
|
||||
// @section tmc/config
|
||||
|
||||
/**
|
||||
* TMC Homing stepper phase.
|
||||
*
|
||||
|
|
@ -3312,7 +3345,7 @@
|
|||
#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave
|
||||
#endif
|
||||
|
||||
// @section extras
|
||||
// @section photo
|
||||
|
||||
/**
|
||||
* Photo G-code
|
||||
|
|
@ -3355,6 +3388,8 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
// @section cnc
|
||||
|
||||
/**
|
||||
* Spindle & Laser control
|
||||
*
|
||||
|
|
@ -3559,6 +3594,8 @@
|
|||
#define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
|
||||
#endif
|
||||
|
||||
// @section filament width
|
||||
|
||||
/**
|
||||
* Filament Width Sensor
|
||||
*
|
||||
|
|
@ -3592,6 +3629,8 @@
|
|||
//#define FILAMENT_LCD_DISPLAY
|
||||
#endif
|
||||
|
||||
// @section power
|
||||
|
||||
/**
|
||||
* Power Monitor
|
||||
* Monitor voltage (V) and/or current (A), and -when possible- power (W)
|
||||
|
|
@ -3615,6 +3654,8 @@
|
|||
#define POWER_MONITOR_VOLTAGE_OFFSET 0 // Offset (in volts) applied to the calculated voltage
|
||||
#endif
|
||||
|
||||
// @section safety
|
||||
|
||||
/**
|
||||
* Stepper Driver Anti-SNAFU Protection
|
||||
*
|
||||
|
|
@ -3624,6 +3665,8 @@
|
|||
*/
|
||||
//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
|
||||
|
||||
// @section cnc
|
||||
|
||||
/**
|
||||
* CNC Coordinate Systems
|
||||
*
|
||||
|
|
@ -3640,6 +3683,8 @@
|
|||
*/
|
||||
//#define CNC_DRILLING_CYCLE
|
||||
|
||||
// @section reporting
|
||||
|
||||
/**
|
||||
* Auto-report fan speed with M123 S<seconds>
|
||||
* Requires fans with tachometer pins
|
||||
|
|
@ -3667,6 +3712,8 @@
|
|||
//#define M115_GEOMETRY_REPORT
|
||||
#endif
|
||||
|
||||
// @section security
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
|
|
@ -3674,6 +3721,8 @@
|
|||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
// @section volumetrics
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
|
|
@ -3702,14 +3751,7 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Enable this option for a leaner build of Marlin that removes all
|
||||
* workspace offsets, simplifying coordinate transformations, leveling, etc.
|
||||
*
|
||||
* - M206 and M428 are disabled.
|
||||
* - G92 will revert to its behavior from Marlin 1.0.
|
||||
*/
|
||||
//#define NO_WORKSPACE_OFFSETS
|
||||
// @section reporting
|
||||
|
||||
// Extra options for the M114 "Current Position" report
|
||||
//#define M114_DETAIL // Use 'M114` for details to check planner calculations
|
||||
|
|
@ -3718,6 +3760,8 @@
|
|||
|
||||
//#define REPORT_FAN_CHANGE // Report the new fan speed when changed by M106 (and others)
|
||||
|
||||
// @section gcode
|
||||
|
||||
/**
|
||||
* Spend 28 bytes of SRAM to optimize the G-code parser
|
||||
*/
|
||||
|
|
@ -3735,6 +3779,15 @@
|
|||
|
||||
//#define REPETIER_GCODE_M360 // Add commands originally from Repetier FW
|
||||
|
||||
/**
|
||||
* Enable this option for a leaner build of Marlin that removes all
|
||||
* workspace offsets, simplifying coordinate transformations, leveling, etc.
|
||||
*
|
||||
* - M206 and M428 are disabled.
|
||||
* - G92 will revert to its behavior from Marlin 1.0.
|
||||
*/
|
||||
//#define NO_WORKSPACE_OFFSETS
|
||||
|
||||
/**
|
||||
* CNC G-code options
|
||||
* Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.
|
||||
|
|
@ -3751,6 +3804,8 @@
|
|||
#endif
|
||||
//#define G0_ANGULAR_FEEDRATE 2700 // (°/min)
|
||||
|
||||
// @section gcode
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
|
|
@ -3775,6 +3830,8 @@
|
|||
* Up to 25 may be defined, but the actual number is LCD-dependent.
|
||||
*/
|
||||
|
||||
// @section custom main menu
|
||||
|
||||
// Custom Menu: Main Menu
|
||||
//#define CUSTOM_MENU_MAIN
|
||||
#if ENABLED(CUSTOM_MENU_MAIN)
|
||||
|
|
@ -3805,6 +3862,8 @@
|
|||
//#define MAIN_MENU_ITEM_5_CONFIRM
|
||||
#endif
|
||||
|
||||
// @section custom config menu
|
||||
|
||||
// Custom Menu: Configuration Menu
|
||||
//#define CUSTOM_MENU_CONFIG
|
||||
#if ENABLED(CUSTOM_MENU_CONFIG)
|
||||
|
|
@ -3835,6 +3894,8 @@
|
|||
//#define CONFIG_MENU_ITEM_5_CONFIRM
|
||||
#endif
|
||||
|
||||
// @section custom buttons
|
||||
|
||||
/**
|
||||
* User-defined buttons to run custom G-code.
|
||||
* Up to 25 may be defined.
|
||||
|
|
@ -3866,6 +3927,8 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
// @section host
|
||||
|
||||
/**
|
||||
* Host Action Commands
|
||||
*
|
||||
|
|
@ -3891,6 +3954,8 @@
|
|||
//#define HOST_SHUTDOWN_MENU_ITEM // Add a menu item that tells the host to shut down
|
||||
#endif
|
||||
|
||||
// @section extras
|
||||
|
||||
/**
|
||||
* Cancel Objects
|
||||
*
|
||||
|
|
@ -3912,6 +3977,7 @@
|
|||
* Alternative Supplier: https://reliabuild3d.com/
|
||||
*
|
||||
* Reliabuild encoders have been modified to improve reliability.
|
||||
* @section i2c encoders
|
||||
*/
|
||||
|
||||
//#define I2C_POSITION_ENCODERS
|
||||
|
|
@ -3983,6 +4049,7 @@
|
|||
|
||||
/**
|
||||
* Analog Joystick(s)
|
||||
* @section joystick
|
||||
*/
|
||||
//#define JOYSTICK
|
||||
#if ENABLED(JOYSTICK)
|
||||
|
|
@ -4007,6 +4074,7 @@
|
|||
* Modern replacement for the Prusa TMC_Z_CALIBRATION.
|
||||
* Adds capability to work with any adjustable current drivers.
|
||||
* Implemented as G34 because M915 is deprecated.
|
||||
* @section calibrate
|
||||
*/
|
||||
//#define MECHANICAL_GANTRY_CALIBRATION
|
||||
#if ENABLED(MECHANICAL_GANTRY_CALIBRATION)
|
||||
|
|
@ -4024,6 +4092,7 @@
|
|||
/**
|
||||
* Instant freeze / unfreeze functionality
|
||||
* Potentially useful for emergency stop that allows being resumed.
|
||||
* @section interface
|
||||
*/
|
||||
//#define FREEZE_FEATURE
|
||||
#if ENABLED(FREEZE_FEATURE)
|
||||
|
|
@ -4036,6 +4105,7 @@
|
|||
*
|
||||
* Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display.
|
||||
* Requires 3 signal wires. Some useful debug options are included to demonstrate its usage.
|
||||
* @section debug matrix
|
||||
*/
|
||||
//#define MAX7219_DEBUG
|
||||
#if ENABLED(MAX7219_DEBUG)
|
||||
|
|
@ -4074,6 +4144,7 @@
|
|||
* Support for Synchronized Z moves when used with NanoDLP. G0/G1 axis moves will
|
||||
* output a "Z_move_comp" string to enable synchronization with DLP projector exposure.
|
||||
* This feature allows you to use [[WaitForDoneMessage]] instead of M400 commands.
|
||||
* @section nanodlp
|
||||
*/
|
||||
//#define NANODLP_Z_SYNC
|
||||
#if ENABLED(NANODLP_Z_SYNC)
|
||||
|
|
@ -4082,6 +4153,7 @@
|
|||
|
||||
/**
|
||||
* Ethernet. Use M552 to enable and set the IP address.
|
||||
* @section network
|
||||
*/
|
||||
#if HAS_ETHERNET
|
||||
#define MAC_ADDRESS { 0xDE, 0xAD, 0xBE, 0xEF, 0xF0, 0x0D } // A MAC address unique to your network
|
||||
|
|
@ -4109,6 +4181,8 @@
|
|||
//#include "Configuration_Secure.h" // External file with WiFi SSID / Password
|
||||
#endif
|
||||
|
||||
// @section multi-material
|
||||
|
||||
/**
|
||||
* Průša Multi-Material Unit (MMU)
|
||||
* Enable in Configuration.h
|
||||
|
|
@ -4216,6 +4290,7 @@
|
|||
|
||||
/**
|
||||
* Advanced Print Counter settings
|
||||
* @section stats
|
||||
*/
|
||||
#if ENABLED(PRINTCOUNTER)
|
||||
#define SERVICE_WARNING_BUZZES 3
|
||||
|
|
|
|||
|
|
@ -114,6 +114,7 @@
|
|||
* :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
|
||||
*/
|
||||
#define BAUDRATE 250000
|
||||
|
||||
//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate
|
||||
|
||||
/**
|
||||
|
|
@ -122,7 +123,7 @@
|
|||
* :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
//#define SERIAL_PORT_2 -1
|
||||
//#define BAUDRATE_2 250000 // Enable to override BAUDRATE
|
||||
//#define BAUDRATE_2 250000 // :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] Enable to override BAUDRATE
|
||||
|
||||
/**
|
||||
* Select a third serial port on the board to use for communication with the host.
|
||||
|
|
@ -130,7 +131,7 @@
|
|||
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
//#define SERIAL_PORT_3 1
|
||||
//#define BAUDRATE_3 250000 // Enable to override BAUDRATE
|
||||
//#define BAUDRATE_3 250000 // :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] Enable to override BAUDRATE
|
||||
|
||||
// Enable the Bluetooth serial interface on AT90USB devices
|
||||
//#define BLUETOOTH
|
||||
|
|
@ -389,7 +390,7 @@
|
|||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
// @section psu control
|
||||
|
||||
/**
|
||||
* Power Supply Control
|
||||
|
|
@ -625,6 +626,8 @@
|
|||
//============================= PID Settings ================================
|
||||
//===========================================================================
|
||||
|
||||
// @section hotend temp
|
||||
|
||||
// Enable PIDTEMP for PID control or MPCTEMP for Predictive Model.
|
||||
// temperature control. Disable both for bang-bang heating.
|
||||
#define PIDTEMP // See the PID Tuning Guide at https://reprap.org/wiki/PID_Tuning
|
||||
|
|
@ -635,7 +638,8 @@
|
|||
#define PID_K1 0.95 // Smoothing factor within any PID loop
|
||||
|
||||
#if ENABLED(PIDTEMP)
|
||||
//#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders)
|
||||
//#define PID_DEBUG // Print PID debug data to the serial port. Use 'M303 D' to toggle activation.
|
||||
//#define PID_PARAMS_PER_HOTEND // Use separate PID parameters for each extruder (useful for mismatched extruders)
|
||||
// Set/get with G-code: M301 E[extruder number, 0-2]
|
||||
|
||||
#if ENABLED(PID_PARAMS_PER_HOTEND)
|
||||
|
|
@ -663,6 +667,7 @@
|
|||
* Use a physical model of the hotend to control temperature. When configured correctly
|
||||
* this gives better responsiveness and stability than PID and it also removes the need
|
||||
* for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model.
|
||||
* @section mpctemp
|
||||
*/
|
||||
#if ENABLED(MPCTEMP)
|
||||
//#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash)
|
||||
|
|
@ -730,7 +735,7 @@
|
|||
|
||||
#if ENABLED(PIDTEMPBED)
|
||||
//#define MIN_BED_POWER 0
|
||||
//#define PID_BED_DEBUG // Sends debug data to the serial port.
|
||||
//#define PID_BED_DEBUG // Print Bed PID debug data to the serial port.
|
||||
|
||||
// 12v (120 watt?) MK2a PCB Heatbed into 4mm borosilicate (Geeetech Průša i3 Pro, Pro/B/C/X)
|
||||
#define DEFAULT_bedKp 234.88
|
||||
|
|
@ -757,6 +762,7 @@
|
|||
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 200W
|
||||
* heater. If your configuration is significantly different than this and you don't understand
|
||||
* the issues involved, don't use chamber PID until someone else verifies that your hardware works.
|
||||
* @section chamber temp
|
||||
*/
|
||||
//#define PIDTEMPCHAMBER
|
||||
//#define CHAMBER_LIMIT_SWITCHING
|
||||
|
|
@ -771,7 +777,7 @@
|
|||
|
||||
#if ENABLED(PIDTEMPCHAMBER)
|
||||
#define MIN_CHAMBER_POWER 0
|
||||
//#define PID_CHAMBER_DEBUG // Sends debug data to the serial port.
|
||||
//#define PID_CHAMBER_DEBUG // Print Chamber PID debug data to the serial port.
|
||||
|
||||
// Lasko "MyHeat Personal Heater" (200w) modified with a Fotek SSR-10DA to control only the heating element
|
||||
// and placed inside the small Creality printer enclosure tent.
|
||||
|
|
@ -785,7 +791,6 @@
|
|||
#endif // PIDTEMPCHAMBER
|
||||
|
||||
#if ANY(PIDTEMP, PIDTEMPBED, PIDTEMPCHAMBER)
|
||||
//#define PID_DEBUG // Sends debug data to the serial port. Use 'M303 D' to toggle activation.
|
||||
//#define PID_OPENLOOP // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX
|
||||
//#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay
|
||||
#define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature
|
||||
|
|
@ -795,7 +800,7 @@
|
|||
//#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of flash)
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
// @section safety
|
||||
|
||||
/**
|
||||
* Prevent extrusion if the temperature is below EXTRUDE_MINTEMP.
|
||||
|
|
@ -863,6 +868,8 @@
|
|||
#define POLAR_SEGMENTS_PER_SECOND 5
|
||||
#endif
|
||||
|
||||
// @section delta
|
||||
|
||||
// Enable for DELTA kinematics and configure below
|
||||
//#define DELTA
|
||||
#if ENABLED(DELTA)
|
||||
|
|
@ -922,6 +929,8 @@
|
|||
//#define DELTA_DIAGONAL_ROD_TRIM_TOWER { 0.0, 0.0, 0.0 }
|
||||
#endif
|
||||
|
||||
// @section scara
|
||||
|
||||
/**
|
||||
* MORGAN_SCARA was developed by QHARLEY in South Africa in 2012-2013.
|
||||
* Implemented and slightly reworked by JCERNY in June, 2014.
|
||||
|
|
@ -965,6 +974,8 @@
|
|||
|
||||
#endif
|
||||
|
||||
// @section tpara
|
||||
|
||||
// Enable for TPARA kinematics and configure below
|
||||
//#define AXEL_TPARA
|
||||
#if ENABLED(AXEL_TPARA)
|
||||
|
|
@ -991,6 +1002,8 @@
|
|||
#define PSI_HOMING_OFFSET 0
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
|
|
@ -1002,7 +1015,7 @@
|
|||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
||||
// @section homing
|
||||
// @section endstops
|
||||
|
||||
// Specify here all the endstop connectors that are connected to any endstop or probe.
|
||||
// Almost all printers will be using one per axis. Probes will use one or more of the
|
||||
|
|
@ -1678,7 +1691,7 @@
|
|||
//#define V_HOME_DIR -1
|
||||
//#define W_HOME_DIR -1
|
||||
|
||||
// @section machine
|
||||
// @section geometry
|
||||
|
||||
// The size of the printable area
|
||||
#define X_BED_SIZE 200
|
||||
|
|
@ -2138,7 +2151,7 @@
|
|||
//============================= Additional Features ===========================
|
||||
//=============================================================================
|
||||
|
||||
// @section extras
|
||||
// @section eeprom
|
||||
|
||||
/**
|
||||
* EEPROM
|
||||
|
|
@ -2158,6 +2171,8 @@
|
|||
//#define EEPROM_INIT_NOW // Init EEPROM on first boot after a new build.
|
||||
#endif
|
||||
|
||||
// @section host
|
||||
|
||||
//
|
||||
// Host Keepalive
|
||||
//
|
||||
|
|
@ -2168,6 +2183,8 @@
|
|||
#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113.
|
||||
#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating
|
||||
|
||||
// @section units
|
||||
|
||||
//
|
||||
// G20/G21 Inch mode support
|
||||
//
|
||||
|
|
@ -2195,6 +2212,8 @@
|
|||
#define PREHEAT_2_TEMP_CHAMBER 35
|
||||
#define PREHEAT_2_FAN_SPEED 170 // Value from 0 to 255
|
||||
|
||||
// @section motion
|
||||
|
||||
/**
|
||||
* Nozzle Park
|
||||
*
|
||||
|
|
@ -2293,6 +2312,8 @@
|
|||
|
||||
#endif
|
||||
|
||||
// @section host
|
||||
|
||||
/**
|
||||
* Print Job Timer
|
||||
*
|
||||
|
|
@ -2319,6 +2340,8 @@
|
|||
*/
|
||||
#define PRINTJOB_TIMER_AUTOSTART
|
||||
|
||||
// @section stats
|
||||
|
||||
/**
|
||||
* Print Counter
|
||||
*
|
||||
|
|
@ -2336,6 +2359,8 @@
|
|||
#define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print
|
||||
#endif
|
||||
|
||||
// @section security
|
||||
|
||||
/**
|
||||
* Password
|
||||
*
|
||||
|
|
@ -2371,7 +2396,7 @@
|
|||
//============================= LCD and SD support ============================
|
||||
//=============================================================================
|
||||
|
||||
// @section lcd
|
||||
// @section interface
|
||||
|
||||
/**
|
||||
* LCD LANGUAGE
|
||||
|
|
@ -2527,6 +2552,7 @@
|
|||
//======================== LCD / Controller Selection =========================
|
||||
//======================== (Character-based LCDs) =========================
|
||||
//=============================================================================
|
||||
// @section lcd
|
||||
|
||||
//
|
||||
// RepRapDiscount Smart Controller.
|
||||
|
|
@ -3172,7 +3198,7 @@
|
|||
//=============================== Extra Features ==============================
|
||||
//=============================================================================
|
||||
|
||||
// @section extras
|
||||
// @section fans
|
||||
|
||||
// Set number of user-controlled fans. Disable to use all board-defined fans.
|
||||
// :[1,2,3,4,5,6,7,8]
|
||||
|
|
@ -3196,14 +3222,18 @@
|
|||
// duty cycle is attained.
|
||||
//#define SOFT_PWM_DITHER
|
||||
|
||||
// @section extras
|
||||
|
||||
// Support for the BariCUDA Paste Extruder
|
||||
//#define BARICUDA
|
||||
|
||||
// @section lights
|
||||
|
||||
// Temperature status LEDs that display the hotend and bed temperature.
|
||||
// If all hotends, bed temperature, and target temperature are under 54C
|
||||
// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis)
|
||||
//#define TEMP_STAT_LEDS
|
||||
|
||||
// Support for the BariCUDA Paste Extruder
|
||||
//#define BARICUDA
|
||||
|
||||
// Support for BlinkM/CyzRgb
|
||||
//#define BLINKM
|
||||
|
||||
|
|
@ -3289,6 +3319,8 @@
|
|||
#define PRINTER_EVENT_LEDS
|
||||
#endif
|
||||
|
||||
// @section servos
|
||||
|
||||
/**
|
||||
* Number of servos
|
||||
*
|
||||
|
|
|
|||
|
|
@ -114,6 +114,7 @@
|
|||
* :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
|
||||
*/
|
||||
#define BAUDRATE 250000
|
||||
|
||||
//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate
|
||||
|
||||
/**
|
||||
|
|
@ -122,7 +123,7 @@
|
|||
* :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
//#define SERIAL_PORT_2 -1
|
||||
//#define BAUDRATE_2 250000 // Enable to override BAUDRATE
|
||||
//#define BAUDRATE_2 250000 // :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] Enable to override BAUDRATE
|
||||
|
||||
/**
|
||||
* Select a third serial port on the board to use for communication with the host.
|
||||
|
|
@ -130,7 +131,7 @@
|
|||
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
//#define SERIAL_PORT_3 1
|
||||
//#define BAUDRATE_3 250000 // Enable to override BAUDRATE
|
||||
//#define BAUDRATE_3 250000 // :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] Enable to override BAUDRATE
|
||||
|
||||
// Enable the Bluetooth serial interface on AT90USB devices
|
||||
//#define BLUETOOTH
|
||||
|
|
@ -389,7 +390,7 @@
|
|||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
// @section psu control
|
||||
|
||||
/**
|
||||
* Power Supply Control
|
||||
|
|
@ -625,6 +626,8 @@
|
|||
//============================= PID Settings ================================
|
||||
//===========================================================================
|
||||
|
||||
// @section hotend temp
|
||||
|
||||
// Enable PIDTEMP for PID control or MPCTEMP for Predictive Model.
|
||||
// temperature control. Disable both for bang-bang heating.
|
||||
#define PIDTEMP // See the PID Tuning Guide at https://reprap.org/wiki/PID_Tuning
|
||||
|
|
@ -635,7 +638,8 @@
|
|||
#define PID_K1 0.95 // Smoothing factor within any PID loop
|
||||
|
||||
#if ENABLED(PIDTEMP)
|
||||
//#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders)
|
||||
//#define PID_DEBUG // Print PID debug data to the serial port. Use 'M303 D' to toggle activation.
|
||||
//#define PID_PARAMS_PER_HOTEND // Use separate PID parameters for each extruder (useful for mismatched extruders)
|
||||
// Set/get with G-code: M301 E[extruder number, 0-2]
|
||||
|
||||
#if ENABLED(PID_PARAMS_PER_HOTEND)
|
||||
|
|
@ -663,6 +667,7 @@
|
|||
* Use a physical model of the hotend to control temperature. When configured correctly
|
||||
* this gives better responsiveness and stability than PID and it also removes the need
|
||||
* for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model.
|
||||
* @section mpctemp
|
||||
*/
|
||||
#if ENABLED(MPCTEMP)
|
||||
//#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash)
|
||||
|
|
@ -730,7 +735,7 @@
|
|||
|
||||
#if ENABLED(PIDTEMPBED)
|
||||
//#define MIN_BED_POWER 0
|
||||
//#define PID_BED_DEBUG // Sends debug data to the serial port.
|
||||
//#define PID_BED_DEBUG // Print Bed PID debug data to the serial port.
|
||||
|
||||
// 12v (120 watt?) MK2a PCB Heatbed into 4mm borosilicate (Geeetech Průša i3 Pro, Pro/B/C/X)
|
||||
#define DEFAULT_bedKp 234.88
|
||||
|
|
@ -757,6 +762,7 @@
|
|||
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 200W
|
||||
* heater. If your configuration is significantly different than this and you don't understand
|
||||
* the issues involved, don't use chamber PID until someone else verifies that your hardware works.
|
||||
* @section chamber temp
|
||||
*/
|
||||
//#define PIDTEMPCHAMBER
|
||||
//#define CHAMBER_LIMIT_SWITCHING
|
||||
|
|
@ -771,7 +777,7 @@
|
|||
|
||||
#if ENABLED(PIDTEMPCHAMBER)
|
||||
#define MIN_CHAMBER_POWER 0
|
||||
//#define PID_CHAMBER_DEBUG // Sends debug data to the serial port.
|
||||
//#define PID_CHAMBER_DEBUG // Print Chamber PID debug data to the serial port.
|
||||
|
||||
// Lasko "MyHeat Personal Heater" (200w) modified with a Fotek SSR-10DA to control only the heating element
|
||||
// and placed inside the small Creality printer enclosure tent.
|
||||
|
|
@ -785,7 +791,6 @@
|
|||
#endif // PIDTEMPCHAMBER
|
||||
|
||||
#if ANY(PIDTEMP, PIDTEMPBED, PIDTEMPCHAMBER)
|
||||
//#define PID_DEBUG // Sends debug data to the serial port. Use 'M303 D' to toggle activation.
|
||||
//#define PID_OPENLOOP // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX
|
||||
//#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay
|
||||
#define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature
|
||||
|
|
@ -795,7 +800,7 @@
|
|||
//#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of flash)
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
// @section safety
|
||||
|
||||
/**
|
||||
* Prevent extrusion if the temperature is below EXTRUDE_MINTEMP.
|
||||
|
|
@ -863,6 +868,8 @@
|
|||
#define POLAR_SEGMENTS_PER_SECOND 5
|
||||
#endif
|
||||
|
||||
// @section delta
|
||||
|
||||
// Enable for DELTA kinematics and configure below
|
||||
//#define DELTA
|
||||
#if ENABLED(DELTA)
|
||||
|
|
@ -922,6 +929,8 @@
|
|||
//#define DELTA_DIAGONAL_ROD_TRIM_TOWER { 0.0, 0.0, 0.0 }
|
||||
#endif
|
||||
|
||||
// @section scara
|
||||
|
||||
/**
|
||||
* MORGAN_SCARA was developed by QHARLEY in South Africa in 2012-2013.
|
||||
* Implemented and slightly reworked by JCERNY in June, 2014.
|
||||
|
|
@ -965,6 +974,8 @@
|
|||
|
||||
#endif
|
||||
|
||||
// @section tpara
|
||||
|
||||
// Enable for TPARA kinematics and configure below
|
||||
//#define AXEL_TPARA
|
||||
#if ENABLED(AXEL_TPARA)
|
||||
|
|
@ -991,6 +1002,8 @@
|
|||
#define PSI_HOMING_OFFSET 0
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
|
|
@ -1002,7 +1015,7 @@
|
|||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
||||
// @section homing
|
||||
// @section endstops
|
||||
|
||||
// Specify here all the endstop connectors that are connected to any endstop or probe.
|
||||
// Almost all printers will be using one per axis. Probes will use one or more of the
|
||||
|
|
@ -1677,7 +1690,7 @@
|
|||
//#define V_HOME_DIR -1
|
||||
//#define W_HOME_DIR -1
|
||||
|
||||
// @section machine
|
||||
// @section geometry
|
||||
|
||||
// The size of the printable area
|
||||
#define X_BED_SIZE 200
|
||||
|
|
@ -2137,7 +2150,7 @@
|
|||
//============================= Additional Features ===========================
|
||||
//=============================================================================
|
||||
|
||||
// @section extras
|
||||
// @section eeprom
|
||||
|
||||
/**
|
||||
* EEPROM
|
||||
|
|
@ -2157,6 +2170,8 @@
|
|||
//#define EEPROM_INIT_NOW // Init EEPROM on first boot after a new build.
|
||||
#endif
|
||||
|
||||
// @section host
|
||||
|
||||
//
|
||||
// Host Keepalive
|
||||
//
|
||||
|
|
@ -2167,6 +2182,8 @@
|
|||
#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113.
|
||||
#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating
|
||||
|
||||
// @section units
|
||||
|
||||
//
|
||||
// G20/G21 Inch mode support
|
||||
//
|
||||
|
|
@ -2194,6 +2211,8 @@
|
|||
#define PREHEAT_2_TEMP_CHAMBER 35
|
||||
#define PREHEAT_2_FAN_SPEED 170 // Value from 0 to 255
|
||||
|
||||
// @section motion
|
||||
|
||||
/**
|
||||
* Nozzle Park
|
||||
*
|
||||
|
|
@ -2292,6 +2311,8 @@
|
|||
|
||||
#endif
|
||||
|
||||
// @section host
|
||||
|
||||
/**
|
||||
* Print Job Timer
|
||||
*
|
||||
|
|
@ -2318,6 +2339,8 @@
|
|||
*/
|
||||
#define PRINTJOB_TIMER_AUTOSTART
|
||||
|
||||
// @section stats
|
||||
|
||||
/**
|
||||
* Print Counter
|
||||
*
|
||||
|
|
@ -2335,6 +2358,8 @@
|
|||
#define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print
|
||||
#endif
|
||||
|
||||
// @section security
|
||||
|
||||
/**
|
||||
* Password
|
||||
*
|
||||
|
|
@ -2370,7 +2395,7 @@
|
|||
//============================= LCD and SD support ============================
|
||||
//=============================================================================
|
||||
|
||||
// @section lcd
|
||||
// @section interface
|
||||
|
||||
/**
|
||||
* LCD LANGUAGE
|
||||
|
|
@ -2526,6 +2551,7 @@
|
|||
//======================== LCD / Controller Selection =========================
|
||||
//======================== (Character-based LCDs) =========================
|
||||
//=============================================================================
|
||||
// @section lcd
|
||||
|
||||
//
|
||||
// RepRapDiscount Smart Controller.
|
||||
|
|
@ -3171,7 +3197,7 @@
|
|||
//=============================== Extra Features ==============================
|
||||
//=============================================================================
|
||||
|
||||
// @section extras
|
||||
// @section fans
|
||||
|
||||
// Set number of user-controlled fans. Disable to use all board-defined fans.
|
||||
// :[1,2,3,4,5,6,7,8]
|
||||
|
|
@ -3195,14 +3221,18 @@
|
|||
// duty cycle is attained.
|
||||
//#define SOFT_PWM_DITHER
|
||||
|
||||
// @section extras
|
||||
|
||||
// Support for the BariCUDA Paste Extruder
|
||||
//#define BARICUDA
|
||||
|
||||
// @section lights
|
||||
|
||||
// Temperature status LEDs that display the hotend and bed temperature.
|
||||
// If all hotends, bed temperature, and target temperature are under 54C
|
||||
// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis)
|
||||
//#define TEMP_STAT_LEDS
|
||||
|
||||
// Support for the BariCUDA Paste Extruder
|
||||
//#define BARICUDA
|
||||
|
||||
// Support for BlinkM/CyzRgb
|
||||
//#define BLINKM
|
||||
|
||||
|
|
@ -3288,6 +3318,8 @@
|
|||
#define PRINTER_EVENT_LEDS
|
||||
#endif
|
||||
|
||||
// @section servos
|
||||
|
||||
/**
|
||||
* Number of servos
|
||||
*
|
||||
|
|
|
|||
|
|
@ -114,6 +114,7 @@
|
|||
* :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
|
||||
*/
|
||||
#define BAUDRATE 250000
|
||||
|
||||
//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate
|
||||
|
||||
/**
|
||||
|
|
@ -122,7 +123,7 @@
|
|||
* :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
//#define SERIAL_PORT_2 -1
|
||||
//#define BAUDRATE_2 250000 // Enable to override BAUDRATE
|
||||
//#define BAUDRATE_2 250000 // :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] Enable to override BAUDRATE
|
||||
|
||||
/**
|
||||
* Select a third serial port on the board to use for communication with the host.
|
||||
|
|
@ -130,7 +131,7 @@
|
|||
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
//#define SERIAL_PORT_3 1
|
||||
//#define BAUDRATE_3 250000 // Enable to override BAUDRATE
|
||||
//#define BAUDRATE_3 250000 // :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] Enable to override BAUDRATE
|
||||
|
||||
// Enable the Bluetooth serial interface on AT90USB devices
|
||||
//#define BLUETOOTH
|
||||
|
|
@ -389,7 +390,7 @@
|
|||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
// @section psu control
|
||||
|
||||
/**
|
||||
* Power Supply Control
|
||||
|
|
@ -625,6 +626,8 @@
|
|||
//============================= PID Settings ================================
|
||||
//===========================================================================
|
||||
|
||||
// @section hotend temp
|
||||
|
||||
// Enable PIDTEMP for PID control or MPCTEMP for Predictive Model.
|
||||
// temperature control. Disable both for bang-bang heating.
|
||||
#define PIDTEMP // See the PID Tuning Guide at https://reprap.org/wiki/PID_Tuning
|
||||
|
|
@ -635,7 +638,8 @@
|
|||
#define PID_K1 0.95 // Smoothing factor within any PID loop
|
||||
|
||||
#if ENABLED(PIDTEMP)
|
||||
//#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders)
|
||||
//#define PID_DEBUG // Print PID debug data to the serial port. Use 'M303 D' to toggle activation.
|
||||
//#define PID_PARAMS_PER_HOTEND // Use separate PID parameters for each extruder (useful for mismatched extruders)
|
||||
// Set/get with G-code: M301 E[extruder number, 0-2]
|
||||
|
||||
#if ENABLED(PID_PARAMS_PER_HOTEND)
|
||||
|
|
@ -657,6 +661,7 @@
|
|||
* Use a physical model of the hotend to control temperature. When configured correctly
|
||||
* this gives better responsiveness and stability than PID and it also removes the need
|
||||
* for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model.
|
||||
* @section mpctemp
|
||||
*/
|
||||
#if ENABLED(MPCTEMP)
|
||||
//#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash)
|
||||
|
|
@ -724,7 +729,7 @@
|
|||
|
||||
#if ENABLED(PIDTEMPBED)
|
||||
//#define MIN_BED_POWER 0
|
||||
//#define PID_BED_DEBUG // Sends debug data to the serial port.
|
||||
//#define PID_BED_DEBUG // Print Bed PID debug data to the serial port.
|
||||
|
||||
// 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
|
||||
// from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
|
||||
|
|
@ -752,6 +757,7 @@
|
|||
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 200W
|
||||
* heater. If your configuration is significantly different than this and you don't understand
|
||||
* the issues involved, don't use chamber PID until someone else verifies that your hardware works.
|
||||
* @section chamber temp
|
||||
*/
|
||||
//#define PIDTEMPCHAMBER
|
||||
//#define CHAMBER_LIMIT_SWITCHING
|
||||
|
|
@ -766,7 +772,7 @@
|
|||
|
||||
#if ENABLED(PIDTEMPCHAMBER)
|
||||
#define MIN_CHAMBER_POWER 0
|
||||
//#define PID_CHAMBER_DEBUG // Sends debug data to the serial port.
|
||||
//#define PID_CHAMBER_DEBUG // Print Chamber PID debug data to the serial port.
|
||||
|
||||
// Lasko "MyHeat Personal Heater" (200w) modified with a Fotek SSR-10DA to control only the heating element
|
||||
// and placed inside the small Creality printer enclosure tent.
|
||||
|
|
@ -780,7 +786,6 @@
|
|||
#endif // PIDTEMPCHAMBER
|
||||
|
||||
#if ANY(PIDTEMP, PIDTEMPBED, PIDTEMPCHAMBER)
|
||||
//#define PID_DEBUG // Sends debug data to the serial port. Use 'M303 D' to toggle activation.
|
||||
//#define PID_OPENLOOP // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX
|
||||
//#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay
|
||||
#define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature
|
||||
|
|
@ -790,7 +795,7 @@
|
|||
//#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of flash)
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
// @section safety
|
||||
|
||||
/**
|
||||
* Prevent extrusion if the temperature is below EXTRUDE_MINTEMP.
|
||||
|
|
@ -858,6 +863,8 @@
|
|||
#define POLAR_SEGMENTS_PER_SECOND 5
|
||||
#endif
|
||||
|
||||
// @section delta
|
||||
|
||||
// Enable for DELTA kinematics and configure below
|
||||
//#define DELTA
|
||||
#if ENABLED(DELTA)
|
||||
|
|
@ -917,6 +924,8 @@
|
|||
//#define DELTA_DIAGONAL_ROD_TRIM_TOWER { 0.0, 0.0, 0.0 }
|
||||
#endif
|
||||
|
||||
// @section scara
|
||||
|
||||
/**
|
||||
* MORGAN_SCARA was developed by QHARLEY in South Africa in 2012-2013.
|
||||
* Implemented and slightly reworked by JCERNY in June, 2014.
|
||||
|
|
@ -960,6 +969,8 @@
|
|||
|
||||
#endif
|
||||
|
||||
// @section tpara
|
||||
|
||||
// Enable for TPARA kinematics and configure below
|
||||
//#define AXEL_TPARA
|
||||
#if ENABLED(AXEL_TPARA)
|
||||
|
|
@ -986,6 +997,8 @@
|
|||
#define PSI_HOMING_OFFSET 0
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
|
|
@ -997,7 +1010,7 @@
|
|||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
||||
// @section homing
|
||||
// @section endstops
|
||||
|
||||
// Specify here all the endstop connectors that are connected to any endstop or probe.
|
||||
// Almost all printers will be using one per axis. Probes will use one or more of the
|
||||
|
|
@ -1667,7 +1680,7 @@
|
|||
//#define V_HOME_DIR -1
|
||||
//#define W_HOME_DIR -1
|
||||
|
||||
// @section machine
|
||||
// @section geometry
|
||||
|
||||
// The size of the printable area
|
||||
#define X_BED_SIZE 200
|
||||
|
|
@ -2127,7 +2140,7 @@
|
|||
//============================= Additional Features ===========================
|
||||
//=============================================================================
|
||||
|
||||
// @section extras
|
||||
// @section eeprom
|
||||
|
||||
/**
|
||||
* EEPROM
|
||||
|
|
@ -2147,6 +2160,8 @@
|
|||
//#define EEPROM_INIT_NOW // Init EEPROM on first boot after a new build.
|
||||
#endif
|
||||
|
||||
// @section host
|
||||
|
||||
//
|
||||
// Host Keepalive
|
||||
//
|
||||
|
|
@ -2157,6 +2172,8 @@
|
|||
#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113.
|
||||
#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating
|
||||
|
||||
// @section units
|
||||
|
||||
//
|
||||
// G20/G21 Inch mode support
|
||||
//
|
||||
|
|
@ -2184,6 +2201,8 @@
|
|||
#define PREHEAT_2_TEMP_CHAMBER 35
|
||||
#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
|
||||
|
||||
// @section motion
|
||||
|
||||
/**
|
||||
* Nozzle Park
|
||||
*
|
||||
|
|
@ -2282,6 +2301,8 @@
|
|||
|
||||
#endif
|
||||
|
||||
// @section host
|
||||
|
||||
/**
|
||||
* Print Job Timer
|
||||
*
|
||||
|
|
@ -2308,6 +2329,8 @@
|
|||
*/
|
||||
#define PRINTJOB_TIMER_AUTOSTART
|
||||
|
||||
// @section stats
|
||||
|
||||
/**
|
||||
* Print Counter
|
||||
*
|
||||
|
|
@ -2325,6 +2348,8 @@
|
|||
#define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print
|
||||
#endif
|
||||
|
||||
// @section security
|
||||
|
||||
/**
|
||||
* Password
|
||||
*
|
||||
|
|
@ -2360,7 +2385,7 @@
|
|||
//============================= LCD and SD support ============================
|
||||
//=============================================================================
|
||||
|
||||
// @section lcd
|
||||
// @section interface
|
||||
|
||||
/**
|
||||
* LCD LANGUAGE
|
||||
|
|
@ -2516,6 +2541,7 @@
|
|||
//======================== LCD / Controller Selection =========================
|
||||
//======================== (Character-based LCDs) =========================
|
||||
//=============================================================================
|
||||
// @section lcd
|
||||
|
||||
//
|
||||
// RepRapDiscount Smart Controller.
|
||||
|
|
@ -3161,7 +3187,7 @@
|
|||
//=============================== Extra Features ==============================
|
||||
//=============================================================================
|
||||
|
||||
// @section extras
|
||||
// @section fans
|
||||
|
||||
// Set number of user-controlled fans. Disable to use all board-defined fans.
|
||||
// :[1,2,3,4,5,6,7,8]
|
||||
|
|
@ -3185,14 +3211,18 @@
|
|||
// duty cycle is attained.
|
||||
//#define SOFT_PWM_DITHER
|
||||
|
||||
// @section extras
|
||||
|
||||
// Support for the BariCUDA Paste Extruder
|
||||
//#define BARICUDA
|
||||
|
||||
// @section lights
|
||||
|
||||
// Temperature status LEDs that display the hotend and bed temperature.
|
||||
// If all hotends, bed temperature, and target temperature are under 54C
|
||||
// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis)
|
||||
//#define TEMP_STAT_LEDS
|
||||
|
||||
// Support for the BariCUDA Paste Extruder
|
||||
//#define BARICUDA
|
||||
|
||||
// Support for BlinkM/CyzRgb
|
||||
//#define BLINKM
|
||||
|
||||
|
|
@ -3278,6 +3308,8 @@
|
|||
#define PRINTER_EVENT_LEDS
|
||||
#endif
|
||||
|
||||
// @section servos
|
||||
|
||||
/**
|
||||
* Number of servos
|
||||
*
|
||||
|
|
|
|||
|
|
@ -32,6 +32,24 @@
|
|||
*/
|
||||
#define CONFIGURATION_ADV_H_VERSION 02010100
|
||||
|
||||
// @section develop
|
||||
|
||||
/**
|
||||
* Configuration Dump to JSON and INI format
|
||||
*
|
||||
* Dump the configuration as part of the build. (See signature.py)
|
||||
* Output files are saved with the build (e.g., .pio/build/mega2560).
|
||||
*
|
||||
* See `build_all_examples --ini` as an example of config.ini archiving.
|
||||
*
|
||||
* 1 = marlin_config.json - Dictionary containing the configuration.
|
||||
* This file is also generated for CONFIGURATION_EMBEDDING.
|
||||
* 2 = config.ini - File format for PlatformIO preprocessing.
|
||||
* 3 = schema.json - The entire configuration schema. (13 = pattern groups)
|
||||
* 4 = schema.yml - The entire configuration schema.
|
||||
*/
|
||||
//#define CONFIG_DUMP // :[1:'JSON', 2:'config.ini', 3:'schema.json', 4:'schema.yml']
|
||||
|
||||
//===========================================================================
|
||||
//============================= Thermal Settings ============================
|
||||
//===========================================================================
|
||||
|
|
@ -2558,6 +2576,8 @@
|
|||
#endif
|
||||
#endif // HAS_MULTI_EXTRUDER
|
||||
|
||||
// @section advanced pause
|
||||
|
||||
/**
|
||||
* Advanced Pause for Filament Change
|
||||
* - Adds the G-code M600 Filament Change to initiate a filament change.
|
||||
|
|
@ -2616,13 +2636,12 @@
|
|||
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
|
||||
#endif
|
||||
|
||||
// @section tmc
|
||||
|
||||
/**
|
||||
* TMC26X Stepper Driver options
|
||||
*
|
||||
* The TMC26XStepper library is required for this stepper driver.
|
||||
* https://github.com/trinamic/TMC26XStepper
|
||||
* @section tmc/tmc26x
|
||||
*/
|
||||
#if HAS_DRIVER(TMC26X)
|
||||
|
||||
|
|
@ -2760,8 +2779,6 @@
|
|||
|
||||
#endif // TMC26X
|
||||
|
||||
// @section tmc_smart
|
||||
|
||||
/**
|
||||
* To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode
|
||||
* connect your SPI pins to the hardware SPI interface on your board and define
|
||||
|
|
@ -2777,6 +2794,7 @@
|
|||
*
|
||||
* TMCStepper library is required to use TMC stepper drivers.
|
||||
* https://github.com/teemuatlut/TMCStepper
|
||||
* @section tmc/config
|
||||
*/
|
||||
#if HAS_TRINAMIC_CONFIG
|
||||
|
||||
|
|
@ -3000,6 +3018,8 @@
|
|||
//#define E7_HOLD_MULTIPLIER 0.5
|
||||
#endif
|
||||
|
||||
// @section tmc/spi
|
||||
|
||||
/**
|
||||
* Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here.
|
||||
* The default pins can be found in your board's pins file.
|
||||
|
|
@ -3037,6 +3057,8 @@
|
|||
//#define TMC_SW_MISO -1
|
||||
//#define TMC_SW_SCK -1
|
||||
|
||||
// @section tmc/serial
|
||||
|
||||
/**
|
||||
* Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
|
||||
* Set the address using jumpers on pins MS1 and MS2.
|
||||
|
|
@ -3072,6 +3094,8 @@
|
|||
//#define E6_SLAVE_ADDRESS 0
|
||||
//#define E7_SLAVE_ADDRESS 0
|
||||
|
||||
// @section tmc/smart
|
||||
|
||||
/**
|
||||
* Software enable
|
||||
*
|
||||
|
|
@ -3080,6 +3104,8 @@
|
|||
*/
|
||||
//#define SOFTWARE_DRIVER_ENABLE
|
||||
|
||||
// @section tmc/stealthchop
|
||||
|
||||
/**
|
||||
* TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only
|
||||
* Use Trinamic's ultra quiet stepping mode.
|
||||
|
|
@ -3134,6 +3160,8 @@
|
|||
//#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
|
||||
//#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
|
||||
|
||||
// @section tmc/status
|
||||
|
||||
/**
|
||||
* Monitor Trinamic drivers
|
||||
* for error conditions like overtemperature and short to ground.
|
||||
|
|
@ -3153,6 +3181,8 @@
|
|||
#define STOP_ON_ERROR
|
||||
#endif
|
||||
|
||||
// @section tmc/hybrid
|
||||
|
||||
/**
|
||||
* TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only
|
||||
* The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD.
|
||||
|
|
@ -3209,6 +3239,7 @@
|
|||
* homing and adds a guard period for endstop triggering.
|
||||
*
|
||||
* Comment *_STALL_SENSITIVITY to disable sensorless homing for that axis.
|
||||
* @section tmc/stallguard
|
||||
*/
|
||||
//#define SENSORLESS_HOMING // StallGuard capable drivers only
|
||||
|
||||
|
|
@ -3232,6 +3263,8 @@
|
|||
//#define IMPROVE_HOMING_RELIABILITY
|
||||
#endif
|
||||
|
||||
// @section tmc/config
|
||||
|
||||
/**
|
||||
* TMC Homing stepper phase.
|
||||
*
|
||||
|
|
@ -3312,7 +3345,7 @@
|
|||
#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave
|
||||
#endif
|
||||
|
||||
// @section extras
|
||||
// @section photo
|
||||
|
||||
/**
|
||||
* Photo G-code
|
||||
|
|
@ -3355,6 +3388,8 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
// @section cnc
|
||||
|
||||
/**
|
||||
* Spindle & Laser control
|
||||
*
|
||||
|
|
@ -3559,6 +3594,8 @@
|
|||
#define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
|
||||
#endif
|
||||
|
||||
// @section filament width
|
||||
|
||||
/**
|
||||
* Filament Width Sensor
|
||||
*
|
||||
|
|
@ -3592,6 +3629,8 @@
|
|||
//#define FILAMENT_LCD_DISPLAY
|
||||
#endif
|
||||
|
||||
// @section power
|
||||
|
||||
/**
|
||||
* Power Monitor
|
||||
* Monitor voltage (V) and/or current (A), and -when possible- power (W)
|
||||
|
|
@ -3615,6 +3654,8 @@
|
|||
#define POWER_MONITOR_VOLTAGE_OFFSET 0 // Offset (in volts) applied to the calculated voltage
|
||||
#endif
|
||||
|
||||
// @section safety
|
||||
|
||||
/**
|
||||
* Stepper Driver Anti-SNAFU Protection
|
||||
*
|
||||
|
|
@ -3624,6 +3665,8 @@
|
|||
*/
|
||||
//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
|
||||
|
||||
// @section cnc
|
||||
|
||||
/**
|
||||
* CNC Coordinate Systems
|
||||
*
|
||||
|
|
@ -3640,6 +3683,8 @@
|
|||
*/
|
||||
//#define CNC_DRILLING_CYCLE
|
||||
|
||||
// @section reporting
|
||||
|
||||
/**
|
||||
* Auto-report fan speed with M123 S<seconds>
|
||||
* Requires fans with tachometer pins
|
||||
|
|
@ -3667,6 +3712,8 @@
|
|||
//#define M115_GEOMETRY_REPORT
|
||||
#endif
|
||||
|
||||
// @section security
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
|
|
@ -3674,6 +3721,8 @@
|
|||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
// @section volumetrics
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
|
|
@ -3702,14 +3751,7 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Enable this option for a leaner build of Marlin that removes all
|
||||
* workspace offsets, simplifying coordinate transformations, leveling, etc.
|
||||
*
|
||||
* - M206 and M428 are disabled.
|
||||
* - G92 will revert to its behavior from Marlin 1.0.
|
||||
*/
|
||||
//#define NO_WORKSPACE_OFFSETS
|
||||
// @section reporting
|
||||
|
||||
// Extra options for the M114 "Current Position" report
|
||||
//#define M114_DETAIL // Use 'M114` for details to check planner calculations
|
||||
|
|
@ -3718,6 +3760,8 @@
|
|||
|
||||
//#define REPORT_FAN_CHANGE // Report the new fan speed when changed by M106 (and others)
|
||||
|
||||
// @section gcode
|
||||
|
||||
/**
|
||||
* Spend 28 bytes of SRAM to optimize the G-code parser
|
||||
*/
|
||||
|
|
@ -3735,6 +3779,15 @@
|
|||
|
||||
//#define REPETIER_GCODE_M360 // Add commands originally from Repetier FW
|
||||
|
||||
/**
|
||||
* Enable this option for a leaner build of Marlin that removes all
|
||||
* workspace offsets, simplifying coordinate transformations, leveling, etc.
|
||||
*
|
||||
* - M206 and M428 are disabled.
|
||||
* - G92 will revert to its behavior from Marlin 1.0.
|
||||
*/
|
||||
//#define NO_WORKSPACE_OFFSETS
|
||||
|
||||
/**
|
||||
* CNC G-code options
|
||||
* Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.
|
||||
|
|
@ -3751,6 +3804,8 @@
|
|||
#endif
|
||||
//#define G0_ANGULAR_FEEDRATE 2700 // (°/min)
|
||||
|
||||
// @section gcode
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
|
|
@ -3775,6 +3830,8 @@
|
|||
* Up to 25 may be defined, but the actual number is LCD-dependent.
|
||||
*/
|
||||
|
||||
// @section custom main menu
|
||||
|
||||
// Custom Menu: Main Menu
|
||||
//#define CUSTOM_MENU_MAIN
|
||||
#if ENABLED(CUSTOM_MENU_MAIN)
|
||||
|
|
@ -3805,6 +3862,8 @@
|
|||
//#define MAIN_MENU_ITEM_5_CONFIRM
|
||||
#endif
|
||||
|
||||
// @section custom config menu
|
||||
|
||||
// Custom Menu: Configuration Menu
|
||||
//#define CUSTOM_MENU_CONFIG
|
||||
#if ENABLED(CUSTOM_MENU_CONFIG)
|
||||
|
|
@ -3835,6 +3894,8 @@
|
|||
//#define CONFIG_MENU_ITEM_5_CONFIRM
|
||||
#endif
|
||||
|
||||
// @section custom buttons
|
||||
|
||||
/**
|
||||
* User-defined buttons to run custom G-code.
|
||||
* Up to 25 may be defined.
|
||||
|
|
@ -3866,6 +3927,8 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
// @section host
|
||||
|
||||
/**
|
||||
* Host Action Commands
|
||||
*
|
||||
|
|
@ -3891,6 +3954,8 @@
|
|||
//#define HOST_SHUTDOWN_MENU_ITEM // Add a menu item that tells the host to shut down
|
||||
#endif
|
||||
|
||||
// @section extras
|
||||
|
||||
/**
|
||||
* Cancel Objects
|
||||
*
|
||||
|
|
@ -3912,6 +3977,7 @@
|
|||
* Alternative Supplier: https://reliabuild3d.com/
|
||||
*
|
||||
* Reliabuild encoders have been modified to improve reliability.
|
||||
* @section i2c encoders
|
||||
*/
|
||||
|
||||
//#define I2C_POSITION_ENCODERS
|
||||
|
|
@ -3983,6 +4049,7 @@
|
|||
|
||||
/**
|
||||
* Analog Joystick(s)
|
||||
* @section joystick
|
||||
*/
|
||||
//#define JOYSTICK
|
||||
#if ENABLED(JOYSTICK)
|
||||
|
|
@ -4007,6 +4074,7 @@
|
|||
* Modern replacement for the Prusa TMC_Z_CALIBRATION.
|
||||
* Adds capability to work with any adjustable current drivers.
|
||||
* Implemented as G34 because M915 is deprecated.
|
||||
* @section calibrate
|
||||
*/
|
||||
//#define MECHANICAL_GANTRY_CALIBRATION
|
||||
#if ENABLED(MECHANICAL_GANTRY_CALIBRATION)
|
||||
|
|
@ -4024,6 +4092,7 @@
|
|||
/**
|
||||
* Instant freeze / unfreeze functionality
|
||||
* Potentially useful for emergency stop that allows being resumed.
|
||||
* @section interface
|
||||
*/
|
||||
//#define FREEZE_FEATURE
|
||||
#if ENABLED(FREEZE_FEATURE)
|
||||
|
|
@ -4036,6 +4105,7 @@
|
|||
*
|
||||
* Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display.
|
||||
* Requires 3 signal wires. Some useful debug options are included to demonstrate its usage.
|
||||
* @section debug matrix
|
||||
*/
|
||||
//#define MAX7219_DEBUG
|
||||
#if ENABLED(MAX7219_DEBUG)
|
||||
|
|
@ -4074,6 +4144,7 @@
|
|||
* Support for Synchronized Z moves when used with NanoDLP. G0/G1 axis moves will
|
||||
* output a "Z_move_comp" string to enable synchronization with DLP projector exposure.
|
||||
* This feature allows you to use [[WaitForDoneMessage]] instead of M400 commands.
|
||||
* @section nanodlp
|
||||
*/
|
||||
//#define NANODLP_Z_SYNC
|
||||
#if ENABLED(NANODLP_Z_SYNC)
|
||||
|
|
@ -4082,6 +4153,7 @@
|
|||
|
||||
/**
|
||||
* Ethernet. Use M552 to enable and set the IP address.
|
||||
* @section network
|
||||
*/
|
||||
#if HAS_ETHERNET
|
||||
#define MAC_ADDRESS { 0xDE, 0xAD, 0xBE, 0xEF, 0xF0, 0x0D } // A MAC address unique to your network
|
||||
|
|
@ -4109,6 +4181,8 @@
|
|||
//#include "Configuration_Secure.h" // External file with WiFi SSID / Password
|
||||
#endif
|
||||
|
||||
// @section multi-material
|
||||
|
||||
/**
|
||||
* Průša Multi-Material Unit (MMU)
|
||||
* Enable in Configuration.h
|
||||
|
|
@ -4216,6 +4290,7 @@
|
|||
|
||||
/**
|
||||
* Advanced Print Counter settings
|
||||
* @section stats
|
||||
*/
|
||||
#if ENABLED(PRINTCOUNTER)
|
||||
#define SERVICE_WARNING_BUZZES 3
|
||||
|
|
|
|||
|
|
@ -114,6 +114,7 @@
|
|||
* :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
|
||||
*/
|
||||
#define BAUDRATE 250000
|
||||
|
||||
//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate
|
||||
|
||||
/**
|
||||
|
|
@ -122,7 +123,7 @@
|
|||
* :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
//#define SERIAL_PORT_2 -1
|
||||
//#define BAUDRATE_2 250000 // Enable to override BAUDRATE
|
||||
//#define BAUDRATE_2 250000 // :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] Enable to override BAUDRATE
|
||||
|
||||
/**
|
||||
* Select a third serial port on the board to use for communication with the host.
|
||||
|
|
@ -130,7 +131,7 @@
|
|||
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
//#define SERIAL_PORT_3 1
|
||||
//#define BAUDRATE_3 250000 // Enable to override BAUDRATE
|
||||
//#define BAUDRATE_3 250000 // :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] Enable to override BAUDRATE
|
||||
|
||||
// Enable the Bluetooth serial interface on AT90USB devices
|
||||
//#define BLUETOOTH
|
||||
|
|
@ -389,7 +390,7 @@
|
|||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
// @section psu control
|
||||
|
||||
/**
|
||||
* Power Supply Control
|
||||
|
|
@ -625,6 +626,8 @@
|
|||
//============================= PID Settings ================================
|
||||
//===========================================================================
|
||||
|
||||
// @section hotend temp
|
||||
|
||||
// Enable PIDTEMP for PID control or MPCTEMP for Predictive Model.
|
||||
// temperature control. Disable both for bang-bang heating.
|
||||
#define PIDTEMP // See the PID Tuning Guide at https://reprap.org/wiki/PID_Tuning
|
||||
|
|
@ -635,7 +638,8 @@
|
|||
#define PID_K1 0.95 // Smoothing factor within any PID loop
|
||||
|
||||
#if ENABLED(PIDTEMP)
|
||||
//#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders)
|
||||
//#define PID_DEBUG // Print PID debug data to the serial port. Use 'M303 D' to toggle activation.
|
||||
//#define PID_PARAMS_PER_HOTEND // Use separate PID parameters for each extruder (useful for mismatched extruders)
|
||||
// Set/get with G-code: M301 E[extruder number, 0-2]
|
||||
|
||||
#if ENABLED(PID_PARAMS_PER_HOTEND)
|
||||
|
|
@ -657,6 +661,7 @@
|
|||
* Use a physical model of the hotend to control temperature. When configured correctly
|
||||
* this gives better responsiveness and stability than PID and it also removes the need
|
||||
* for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model.
|
||||
* @section mpctemp
|
||||
*/
|
||||
#if ENABLED(MPCTEMP)
|
||||
//#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash)
|
||||
|
|
@ -724,7 +729,7 @@
|
|||
|
||||
#if ENABLED(PIDTEMPBED)
|
||||
//#define MIN_BED_POWER 0
|
||||
//#define PID_BED_DEBUG // Sends debug data to the serial port.
|
||||
//#define PID_BED_DEBUG // Print Bed PID debug data to the serial port.
|
||||
|
||||
// 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
|
||||
// from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
|
||||
|
|
@ -752,6 +757,7 @@
|
|||
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 200W
|
||||
* heater. If your configuration is significantly different than this and you don't understand
|
||||
* the issues involved, don't use chamber PID until someone else verifies that your hardware works.
|
||||
* @section chamber temp
|
||||
*/
|
||||
//#define PIDTEMPCHAMBER
|
||||
//#define CHAMBER_LIMIT_SWITCHING
|
||||
|
|
@ -766,7 +772,7 @@
|
|||
|
||||
#if ENABLED(PIDTEMPCHAMBER)
|
||||
#define MIN_CHAMBER_POWER 0
|
||||
//#define PID_CHAMBER_DEBUG // Sends debug data to the serial port.
|
||||
//#define PID_CHAMBER_DEBUG // Print Chamber PID debug data to the serial port.
|
||||
|
||||
// Lasko "MyHeat Personal Heater" (200w) modified with a Fotek SSR-10DA to control only the heating element
|
||||
// and placed inside the small Creality printer enclosure tent.
|
||||
|
|
@ -780,7 +786,6 @@
|
|||
#endif // PIDTEMPCHAMBER
|
||||
|
||||
#if ANY(PIDTEMP, PIDTEMPBED, PIDTEMPCHAMBER)
|
||||
//#define PID_DEBUG // Sends debug data to the serial port. Use 'M303 D' to toggle activation.
|
||||
//#define PID_OPENLOOP // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX
|
||||
//#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay
|
||||
#define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature
|
||||
|
|
@ -790,7 +795,7 @@
|
|||
//#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of flash)
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
// @section safety
|
||||
|
||||
/**
|
||||
* Prevent extrusion if the temperature is below EXTRUDE_MINTEMP.
|
||||
|
|
@ -858,6 +863,8 @@
|
|||
#define POLAR_SEGMENTS_PER_SECOND 5
|
||||
#endif
|
||||
|
||||
// @section delta
|
||||
|
||||
// Enable for DELTA kinematics and configure below
|
||||
//#define DELTA
|
||||
#if ENABLED(DELTA)
|
||||
|
|
@ -917,6 +924,8 @@
|
|||
//#define DELTA_DIAGONAL_ROD_TRIM_TOWER { 0.0, 0.0, 0.0 }
|
||||
#endif
|
||||
|
||||
// @section scara
|
||||
|
||||
/**
|
||||
* MORGAN_SCARA was developed by QHARLEY in South Africa in 2012-2013.
|
||||
* Implemented and slightly reworked by JCERNY in June, 2014.
|
||||
|
|
@ -960,6 +969,8 @@
|
|||
|
||||
#endif
|
||||
|
||||
// @section tpara
|
||||
|
||||
// Enable for TPARA kinematics and configure below
|
||||
//#define AXEL_TPARA
|
||||
#if ENABLED(AXEL_TPARA)
|
||||
|
|
@ -986,6 +997,8 @@
|
|||
#define PSI_HOMING_OFFSET 0
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
||||
// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
|
||||
//#define ARTICULATED_ROBOT_ARM
|
||||
|
||||
|
|
@ -997,7 +1010,7 @@
|
|||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
||||
// @section homing
|
||||
// @section endstops
|
||||
|
||||
// Specify here all the endstop connectors that are connected to any endstop or probe.
|
||||
// Almost all printers will be using one per axis. Probes will use one or more of the
|
||||
|
|
@ -1667,7 +1680,7 @@
|
|||
//#define V_HOME_DIR -1
|
||||
//#define W_HOME_DIR -1
|
||||
|
||||
// @section machine
|
||||
// @section geometry
|
||||
|
||||
// The size of the printable area
|
||||
#define X_BED_SIZE 200
|
||||
|
|
@ -2127,7 +2140,7 @@
|
|||
//============================= Additional Features ===========================
|
||||
//=============================================================================
|
||||
|
||||
// @section extras
|
||||
// @section eeprom
|
||||
|
||||
/**
|
||||
* EEPROM
|
||||
|
|
@ -2147,6 +2160,8 @@
|
|||
//#define EEPROM_INIT_NOW // Init EEPROM on first boot after a new build.
|
||||
#endif
|
||||
|
||||
// @section host
|
||||
|
||||
//
|
||||
// Host Keepalive
|
||||
//
|
||||
|
|
@ -2157,6 +2172,8 @@
|
|||
#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113.
|
||||
#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating
|
||||
|
||||
// @section units
|
||||
|
||||
//
|
||||
// G20/G21 Inch mode support
|
||||
//
|
||||
|
|
@ -2184,6 +2201,8 @@
|
|||
#define PREHEAT_2_TEMP_CHAMBER 35
|
||||
#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
|
||||
|
||||
// @section motion
|
||||
|
||||
/**
|
||||
* Nozzle Park
|
||||
*
|
||||
|
|
@ -2282,6 +2301,8 @@
|
|||
|
||||
#endif
|
||||
|
||||
// @section host
|
||||
|
||||
/**
|
||||
* Print Job Timer
|
||||
*
|
||||
|
|
@ -2308,6 +2329,8 @@
|
|||
*/
|
||||
#define PRINTJOB_TIMER_AUTOSTART
|
||||
|
||||
// @section stats
|
||||
|
||||
/**
|
||||
* Print Counter
|
||||
*
|
||||
|
|
@ -2325,6 +2348,8 @@
|
|||
#define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print
|
||||
#endif
|
||||
|
||||
// @section security
|
||||
|
||||
/**
|
||||
* Password
|
||||
*
|
||||
|
|
@ -2360,7 +2385,7 @@
|
|||
//============================= LCD and SD support ============================
|
||||
//=============================================================================
|
||||
|
||||
// @section lcd
|
||||
// @section interface
|
||||
|
||||
/**
|
||||
* LCD LANGUAGE
|
||||
|
|
@ -2516,6 +2541,7 @@
|
|||
//======================== LCD / Controller Selection =========================
|
||||
//======================== (Character-based LCDs) =========================
|
||||
//=============================================================================
|
||||
// @section lcd
|
||||
|
||||
//
|
||||
// RepRapDiscount Smart Controller.
|
||||
|
|
@ -3161,7 +3187,7 @@
|
|||
//=============================== Extra Features ==============================
|
||||
//=============================================================================
|
||||
|
||||
// @section extras
|
||||
// @section fans
|
||||
|
||||
// Set number of user-controlled fans. Disable to use all board-defined fans.
|
||||
// :[1,2,3,4,5,6,7,8]
|
||||
|
|
@ -3185,14 +3211,18 @@
|
|||
// duty cycle is attained.
|
||||
//#define SOFT_PWM_DITHER
|
||||
|
||||
// @section extras
|
||||
|
||||
// Support for the BariCUDA Paste Extruder
|
||||
//#define BARICUDA
|
||||
|
||||
// @section lights
|
||||
|
||||
// Temperature status LEDs that display the hotend and bed temperature.
|
||||
// If all hotends, bed temperature, and target temperature are under 54C
|
||||
// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis)
|
||||
//#define TEMP_STAT_LEDS
|
||||
|
||||
// Support for the BariCUDA Paste Extruder
|
||||
//#define BARICUDA
|
||||
|
||||
// Support for BlinkM/CyzRgb
|
||||
//#define BLINKM
|
||||
|
||||
|
|
@ -3278,6 +3308,8 @@
|
|||
#define PRINTER_EVENT_LEDS
|
||||
#endif
|
||||
|
||||
// @section servos
|
||||
|
||||
/**
|
||||
* Number of servos
|
||||
*
|
||||
|
|
|
|||
|
|
@ -32,6 +32,24 @@
|
|||
*/
|
||||
#define CONFIGURATION_ADV_H_VERSION 02010100
|
||||
|
||||
// @section develop
|
||||
|
||||
/**
|
||||
* Configuration Dump to JSON and INI format
|
||||
*
|
||||
* Dump the configuration as part of the build. (See signature.py)
|
||||
* Output files are saved with the build (e.g., .pio/build/mega2560).
|
||||
*
|
||||
* See `build_all_examples --ini` as an example of config.ini archiving.
|
||||
*
|
||||
* 1 = marlin_config.json - Dictionary containing the configuration.
|
||||
* This file is also generated for CONFIGURATION_EMBEDDING.
|
||||
* 2 = config.ini - File format for PlatformIO preprocessing.
|
||||
* 3 = schema.json - The entire configuration schema. (13 = pattern groups)
|
||||
* 4 = schema.yml - The entire configuration schema.
|
||||
*/
|
||||
//#define CONFIG_DUMP // :[1:'JSON', 2:'config.ini', 3:'schema.json', 4:'schema.yml']
|
||||
|
||||
//===========================================================================
|
||||
//============================= Thermal Settings ============================
|
||||
//===========================================================================
|
||||
|
|
@ -2558,6 +2576,8 @@
|
|||
#endif
|
||||
#endif // HAS_MULTI_EXTRUDER
|
||||
|
||||
// @section advanced pause
|
||||
|
||||
/**
|
||||
* Advanced Pause for Filament Change
|
||||
* - Adds the G-code M600 Filament Change to initiate a filament change.
|
||||
|
|
@ -2616,13 +2636,12 @@
|
|||
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
|
||||
#endif
|
||||
|
||||
// @section tmc
|
||||
|
||||
/**
|
||||
* TMC26X Stepper Driver options
|
||||
*
|
||||
* The TMC26XStepper library is required for this stepper driver.
|
||||
* https://github.com/trinamic/TMC26XStepper
|
||||
* @section tmc/tmc26x
|
||||
*/
|
||||
#if HAS_DRIVER(TMC26X)
|
||||
|
||||
|
|
@ -2760,8 +2779,6 @@
|
|||
|
||||
#endif // TMC26X
|
||||
|
||||
// @section tmc_smart
|
||||
|
||||
/**
|
||||
* To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode
|
||||
* connect your SPI pins to the hardware SPI interface on your board and define
|
||||
|
|
@ -2777,6 +2794,7 @@
|
|||
*
|
||||
* TMCStepper library is required to use TMC stepper drivers.
|
||||
* https://github.com/teemuatlut/TMCStepper
|
||||
* @section tmc/config
|
||||
*/
|
||||
#if HAS_TRINAMIC_CONFIG
|
||||
|
||||
|
|
@ -3000,6 +3018,8 @@
|
|||
//#define E7_HOLD_MULTIPLIER 0.5
|
||||
#endif
|
||||
|
||||
// @section tmc/spi
|
||||
|
||||
/**
|
||||
* Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here.
|
||||
* The default pins can be found in your board's pins file.
|
||||
|
|
@ -3037,6 +3057,8 @@
|
|||
//#define TMC_SW_MISO -1
|
||||
//#define TMC_SW_SCK -1
|
||||
|
||||
// @section tmc/serial
|
||||
|
||||
/**
|
||||
* Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
|
||||
* Set the address using jumpers on pins MS1 and MS2.
|
||||
|
|
@ -3072,6 +3094,8 @@
|
|||
//#define E6_SLAVE_ADDRESS 0
|
||||
//#define E7_SLAVE_ADDRESS 0
|
||||
|
||||
// @section tmc/smart
|
||||
|
||||
/**
|
||||
* Software enable
|
||||
*
|
||||
|
|
@ -3080,6 +3104,8 @@
|
|||
*/
|
||||
//#define SOFTWARE_DRIVER_ENABLE
|
||||
|
||||
// @section tmc/stealthchop
|
||||
|
||||
/**
|
||||
* TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only
|
||||
* Use Trinamic's ultra quiet stepping mode.
|
||||
|
|
@ -3134,6 +3160,8 @@
|
|||
//#define CHOPPER_TIMING_E6 CHOPPER_TIMING_E
|
||||
//#define CHOPPER_TIMING_E7 CHOPPER_TIMING_E
|
||||
|
||||
// @section tmc/status
|
||||
|
||||
/**
|
||||
* Monitor Trinamic drivers
|
||||
* for error conditions like overtemperature and short to ground.
|
||||
|
|
@ -3153,6 +3181,8 @@
|
|||
#define STOP_ON_ERROR
|
||||
#endif
|
||||
|
||||
// @section tmc/hybrid
|
||||
|
||||
/**
|
||||
* TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only
|
||||
* The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD.
|
||||
|
|
@ -3209,6 +3239,7 @@
|
|||
* homing and adds a guard period for endstop triggering.
|
||||
*
|
||||
* Comment *_STALL_SENSITIVITY to disable sensorless homing for that axis.
|
||||
* @section tmc/stallguard
|
||||
*/
|
||||
//#define SENSORLESS_HOMING // StallGuard capable drivers only
|
||||
|
||||
|
|
@ -3232,6 +3263,8 @@
|
|||
//#define IMPROVE_HOMING_RELIABILITY
|
||||
#endif
|
||||
|
||||
// @section tmc/config
|
||||
|
||||
/**
|
||||
* TMC Homing stepper phase.
|
||||
*
|
||||
|
|
@ -3312,7 +3345,7 @@
|
|||
#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave
|
||||
#endif
|
||||
|
||||
// @section extras
|
||||
// @section photo
|
||||
|
||||
/**
|
||||
* Photo G-code
|
||||
|
|
@ -3355,6 +3388,8 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
// @section cnc
|
||||
|
||||
/**
|
||||
* Spindle & Laser control
|
||||
*
|
||||
|
|
@ -3559,6 +3594,8 @@
|
|||
#define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
|
||||
#endif
|
||||
|
||||
// @section filament width
|
||||
|
||||
/**
|
||||
* Filament Width Sensor
|
||||
*
|
||||
|
|
@ -3592,6 +3629,8 @@
|
|||
//#define FILAMENT_LCD_DISPLAY
|
||||
#endif
|
||||
|
||||
// @section power
|
||||
|
||||
/**
|
||||
* Power Monitor
|
||||
* Monitor voltage (V) and/or current (A), and -when possible- power (W)
|
||||
|
|
@ -3615,6 +3654,8 @@
|
|||
#define POWER_MONITOR_VOLTAGE_OFFSET 0 // Offset (in volts) applied to the calculated voltage
|
||||
#endif
|
||||
|
||||
// @section safety
|
||||
|
||||
/**
|
||||
* Stepper Driver Anti-SNAFU Protection
|
||||
*
|
||||
|
|
@ -3624,6 +3665,8 @@
|
|||
*/
|
||||
//#define DISABLE_DRIVER_SAFE_POWER_PROTECT
|
||||
|
||||
// @section cnc
|
||||
|
||||
/**
|
||||
* CNC Coordinate Systems
|
||||
*
|
||||
|
|
@ -3640,6 +3683,8 @@
|
|||
*/
|
||||
//#define CNC_DRILLING_CYCLE
|
||||
|
||||
// @section reporting
|
||||
|
||||
/**
|
||||
* Auto-report fan speed with M123 S<seconds>
|
||||
* Requires fans with tachometer pins
|
||||
|
|
@ -3667,6 +3712,8 @@
|
|||
//#define M115_GEOMETRY_REPORT
|
||||
#endif
|
||||
|
||||
// @section security
|
||||
|
||||
/**
|
||||
* Expected Printer Check
|
||||
* Add the M16 G-code to compare a string to the MACHINE_NAME.
|
||||
|
|
@ -3674,6 +3721,8 @@
|
|||
*/
|
||||
//#define EXPECTED_PRINTER_CHECK
|
||||
|
||||
// @section volumetrics
|
||||
|
||||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
|
|
@ -3702,14 +3751,7 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Enable this option for a leaner build of Marlin that removes all
|
||||
* workspace offsets, simplifying coordinate transformations, leveling, etc.
|
||||
*
|
||||
* - M206 and M428 are disabled.
|
||||
* - G92 will revert to its behavior from Marlin 1.0.
|
||||
*/
|
||||
//#define NO_WORKSPACE_OFFSETS
|
||||
// @section reporting
|
||||
|
||||
// Extra options for the M114 "Current Position" report
|
||||
//#define M114_DETAIL // Use 'M114` for details to check planner calculations
|
||||
|
|
@ -3718,6 +3760,8 @@
|
|||
|
||||
//#define REPORT_FAN_CHANGE // Report the new fan speed when changed by M106 (and others)
|
||||
|
||||
// @section gcode
|
||||
|
||||
/**
|
||||
* Spend 28 bytes of SRAM to optimize the G-code parser
|
||||
*/
|
||||
|
|
@ -3735,6 +3779,15 @@
|
|||
|
||||
//#define REPETIER_GCODE_M360 // Add commands originally from Repetier FW
|
||||
|
||||
/**
|
||||
* Enable this option for a leaner build of Marlin that removes all
|
||||
* workspace offsets, simplifying coordinate transformations, leveling, etc.
|
||||
*
|
||||
* - M206 and M428 are disabled.
|
||||
* - G92 will revert to its behavior from Marlin 1.0.
|
||||
*/
|
||||
//#define NO_WORKSPACE_OFFSETS
|
||||
|
||||
/**
|
||||
* CNC G-code options
|
||||
* Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.
|
||||
|
|
@ -3751,6 +3804,8 @@
|
|||
#endif
|
||||
//#define G0_ANGULAR_FEEDRATE 2700 // (°/min)
|
||||
|
||||
// @section gcode
|
||||
|
||||
/**
|
||||
* Startup commands
|
||||
*
|
||||
|
|
@ -3775,6 +3830,8 @@
|
|||
* Up to 25 may be defined, but the actual number is LCD-dependent.
|
||||
*/
|
||||
|
||||
// @section custom main menu
|
||||
|
||||
// Custom Menu: Main Menu
|
||||
//#define CUSTOM_MENU_MAIN
|
||||
#if ENABLED(CUSTOM_MENU_MAIN)
|
||||
|
|
@ -3805,6 +3862,8 @@
|
|||
//#define MAIN_MENU_ITEM_5_CONFIRM
|
||||
#endif
|
||||
|
||||
// @section custom config menu
|
||||
|
||||
// Custom Menu: Configuration Menu
|
||||
//#define CUSTOM_MENU_CONFIG
|
||||
#if ENABLED(CUSTOM_MENU_CONFIG)
|
||||
|
|
@ -3835,6 +3894,8 @@
|
|||
//#define CONFIG_MENU_ITEM_5_CONFIRM
|
||||
#endif
|
||||
|
||||
// @section custom buttons
|
||||
|
||||
/**
|
||||
* User-defined buttons to run custom G-code.
|
||||
* Up to 25 may be defined.
|
||||
|
|
@ -3866,6 +3927,8 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
// @section host
|
||||
|
||||
/**
|
||||
* Host Action Commands
|
||||
*
|
||||
|
|
@ -3891,6 +3954,8 @@
|
|||
//#define HOST_SHUTDOWN_MENU_ITEM // Add a menu item that tells the host to shut down
|
||||
#endif
|
||||
|
||||
// @section extras
|
||||
|
||||
/**
|
||||
* Cancel Objects
|
||||
*
|
||||
|
|
@ -3912,6 +3977,7 @@
|
|||
* Alternative Supplier: https://reliabuild3d.com/
|
||||
*
|
||||
* Reliabuild encoders have been modified to improve reliability.
|
||||
* @section i2c encoders
|
||||
*/
|
||||
|
||||
//#define I2C_POSITION_ENCODERS
|
||||
|
|
@ -3983,6 +4049,7 @@
|
|||
|
||||
/**
|
||||
* Analog Joystick(s)
|
||||
* @section joystick
|
||||
*/
|
||||
//#define JOYSTICK
|
||||
#if ENABLED(JOYSTICK)
|
||||
|
|
@ -4007,6 +4074,7 @@
|
|||
* Modern replacement for the Prusa TMC_Z_CALIBRATION.
|
||||
* Adds capability to work with any adjustable current drivers.
|
||||
* Implemented as G34 because M915 is deprecated.
|
||||
* @section calibrate
|
||||
*/
|
||||
//#define MECHANICAL_GANTRY_CALIBRATION
|
||||
#if ENABLED(MECHANICAL_GANTRY_CALIBRATION)
|
||||
|
|
@ -4024,6 +4092,7 @@
|
|||
/**
|
||||
* Instant freeze / unfreeze functionality
|
||||
* Potentially useful for emergency stop that allows being resumed.
|
||||
* @section interface
|
||||
*/
|
||||
//#define FREEZE_FEATURE
|
||||
#if ENABLED(FREEZE_FEATURE)
|
||||
|
|
@ -4036,6 +4105,7 @@
|
|||
*
|
||||
* Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display.
|
||||
* Requires 3 signal wires. Some useful debug options are included to demonstrate its usage.
|
||||
* @section debug matrix
|
||||
*/
|
||||
//#define MAX7219_DEBUG
|
||||
#if ENABLED(MAX7219_DEBUG)
|
||||
|
|
@ -4074,6 +4144,7 @@
|
|||
* Support for Synchronized Z moves when used with NanoDLP. G0/G1 axis moves will
|
||||
* output a "Z_move_comp" string to enable synchronization with DLP projector exposure.
|
||||
* This feature allows you to use [[WaitForDoneMessage]] instead of M400 commands.
|
||||
* @section nanodlp
|
||||
*/
|
||||
//#define NANODLP_Z_SYNC
|
||||
#if ENABLED(NANODLP_Z_SYNC)
|
||||
|
|
@ -4082,6 +4153,7 @@
|
|||
|
||||
/**
|
||||
* Ethernet. Use M552 to enable and set the IP address.
|
||||
* @section network
|
||||
*/
|
||||
#if HAS_ETHERNET
|
||||
#define MAC_ADDRESS { 0xDE, 0xAD, 0xBE, 0xEF, 0xF0, 0x0D } // A MAC address unique to your network
|
||||
|
|
@ -4109,6 +4181,8 @@
|
|||
//#include "Configuration_Secure.h" // External file with WiFi SSID / Password
|
||||
#endif
|
||||
|
||||
// @section multi-material
|
||||
|
||||
/**
|
||||
* Průša Multi-Material Unit (MMU)
|
||||
* Enable in Configuration.h
|
||||
|
|
@ -4216,6 +4290,7 @@
|
|||
|
||||
/**
|
||||
* Advanced Print Counter settings
|
||||
* @section stats
|
||||
*/
|
||||
#if ENABLED(PRINTCOUNTER)
|
||||
#define SERVICE_WARNING_BUZZES 3
|
||||
|
|
|
|||
Loading…
Add table
Add a link
Reference in a new issue