diff --git a/config/default/Configuration_adv.h b/config/default/Configuration_adv.h index a87076f0a8..680dcbaae1 100644 --- a/config/default/Configuration_adv.h +++ b/config/default/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) + * Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h index 8988454cc2..bffa30d0b9 100644 --- a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h +++ b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h @@ -4244,13 +4244,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h index 18a8c73261..9373d71791 100644 --- a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h +++ b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h index 0d204f5cfc..c8b5030758 100644 --- a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h +++ b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h index d96cf3f782..72d55e95e6 100644 --- a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h +++ b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h @@ -4258,13 +4258,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Alfawise/U20/Configuration_adv.h b/config/examples/Alfawise/U20/Configuration_adv.h index c26e0cfd45..1a21cd1b6c 100644 --- a/config/examples/Alfawise/U20/Configuration_adv.h +++ b/config/examples/Alfawise/U20/Configuration_adv.h @@ -4249,13 +4249,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/AliExpress/UM2pExt/Configuration_adv.h b/config/examples/AliExpress/UM2pExt/Configuration_adv.h index f134476fed..7ba65fb2b6 100644 --- a/config/examples/AliExpress/UM2pExt/Configuration_adv.h +++ b/config/examples/AliExpress/UM2pExt/Configuration_adv.h @@ -4250,13 +4250,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Anet/A2/Configuration_adv.h b/config/examples/Anet/A2/Configuration_adv.h index de50ab108a..4983c8f512 100644 --- a/config/examples/Anet/A2/Configuration_adv.h +++ b/config/examples/Anet/A2/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Anet/A2plus/Configuration_adv.h b/config/examples/Anet/A2plus/Configuration_adv.h index de50ab108a..4983c8f512 100644 --- a/config/examples/Anet/A2plus/Configuration_adv.h +++ b/config/examples/Anet/A2plus/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Anet/A6/Configuration_adv.h b/config/examples/Anet/A6/Configuration_adv.h index 240b87bba7..0eb08a3d4a 100644 --- a/config/examples/Anet/A6/Configuration_adv.h +++ b/config/examples/Anet/A6/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Anet/A8/Configuration_adv.h b/config/examples/Anet/A8/Configuration_adv.h index 260bd42bd6..73975bb86c 100644 --- a/config/examples/Anet/A8/Configuration_adv.h +++ b/config/examples/Anet/A8/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Anet/A8plus/Configuration_adv.h b/config/examples/Anet/A8plus/Configuration_adv.h index 9f03a116a1..37e6fc2796 100644 --- a/config/examples/Anet/A8plus/Configuration_adv.h +++ b/config/examples/Anet/A8plus/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Anet/A9/Configuration_adv.h b/config/examples/Anet/A9/Configuration_adv.h index a5bada253f..e57d553518 100644 --- a/config/examples/Anet/A9/Configuration_adv.h +++ b/config/examples/Anet/A9/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Anet/E10/Configuration_adv.h b/config/examples/Anet/E10/Configuration_adv.h index ad3d9e3fbb..032403f89b 100644 --- a/config/examples/Anet/E10/Configuration_adv.h +++ b/config/examples/Anet/E10/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h b/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h index a00ed293cf..3b27d7cc6f 100644 --- a/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h +++ b/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Anet/E16/Stock/Configuration_adv.h b/config/examples/Anet/E16/Stock/Configuration_adv.h index dd12e5d2f6..f21657a71a 100644 --- a/config/examples/Anet/E16/Stock/Configuration_adv.h +++ b/config/examples/Anet/E16/Stock/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Anet/ET4+/Configuration_adv.h b/config/examples/Anet/ET4+/Configuration_adv.h index 7fbf29b847..818b9bdad4 100644 --- a/config/examples/Anet/ET4+/Configuration_adv.h +++ b/config/examples/Anet/ET4+/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Anet/ET4-Pro/Configuration_adv.h b/config/examples/Anet/ET4-Pro/Configuration_adv.h index 7fbf29b847..818b9bdad4 100644 --- a/config/examples/Anet/ET4-Pro/Configuration_adv.h +++ b/config/examples/Anet/ET4-Pro/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Anet/ET4/Configuration_adv.h b/config/examples/Anet/ET4/Configuration_adv.h index 10b958c32d..66cee594c0 100644 --- a/config/examples/Anet/ET4/Configuration_adv.h +++ b/config/examples/Anet/ET4/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Anet/ET4X/Configuration_adv.h b/config/examples/Anet/ET4X/Configuration_adv.h index 10b958c32d..66cee594c0 100644 --- a/config/examples/Anet/ET4X/Configuration_adv.h +++ b/config/examples/Anet/ET4X/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Anet/ET5-Pro/Configuration_adv.h b/config/examples/Anet/ET5-Pro/Configuration_adv.h index 748796a8ce..0382766dd9 100644 --- a/config/examples/Anet/ET5-Pro/Configuration_adv.h +++ b/config/examples/Anet/ET5-Pro/Configuration_adv.h @@ -4245,13 +4245,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Anet/ET5/Configuration_adv.h b/config/examples/Anet/ET5/Configuration_adv.h index 748796a8ce..0382766dd9 100644 --- a/config/examples/Anet/ET5/Configuration_adv.h +++ b/config/examples/Anet/ET5/Configuration_adv.h @@ -4245,13 +4245,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Anet/ET5X/Configuration_adv.h b/config/examples/Anet/ET5X/Configuration_adv.h index 748796a8ce..0382766dd9 100644 --- a/config/examples/Anet/ET5X/Configuration_adv.h +++ b/config/examples/Anet/ET5X/Configuration_adv.h @@ -4245,13 +4245,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/AnyCubic/Chiron/Configuration_adv.h b/config/examples/AnyCubic/Chiron/Configuration_adv.h index 4506979a8f..8a34f15960 100644 --- a/config/examples/AnyCubic/Chiron/Configuration_adv.h +++ b/config/examples/AnyCubic/Chiron/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h index 5ad50aa030..309153f01a 100644 --- a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h +++ b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h index 3aadefb397..351f1d63eb 100644 --- a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h +++ b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h index 623199a881..a438a44c38 100644 --- a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h +++ b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/AnyCubic/Vyper/Configuration_adv.h b/config/examples/AnyCubic/Vyper/Configuration_adv.h index a8461d3438..295b444f65 100644 --- a/config/examples/AnyCubic/Vyper/Configuration_adv.h +++ b/config/examples/AnyCubic/Vyper/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration_adv.h b/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration_adv.h index c9989260c1..fe537a9b27 100644 --- a/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration_adv.h +++ b/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration_adv.h b/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration_adv.h index 1314b57560..d6776aac85 100644 --- a/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration_adv.h +++ b/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/AnyCubic/i3/Configuration_adv.h b/config/examples/AnyCubic/i3/Configuration_adv.h index 8a1ee124cf..f3776e5839 100644 --- a/config/examples/AnyCubic/i3/Configuration_adv.h +++ b/config/examples/AnyCubic/i3/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/ArmEd/Configuration_adv.h b/config/examples/ArmEd/Configuration_adv.h index a5a56d9747..8ac33e1ae8 100644 --- a/config/examples/ArmEd/Configuration_adv.h +++ b/config/examples/ArmEd/Configuration_adv.h @@ -4253,13 +4253,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Artillery/Genius Pro/Configuration_adv.h b/config/examples/Artillery/Genius Pro/Configuration_adv.h index bba0f488ba..7443f021dd 100644 --- a/config/examples/Artillery/Genius Pro/Configuration_adv.h +++ b/config/examples/Artillery/Genius Pro/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Artillery/Genius/BLTouch/Configuration_adv.h b/config/examples/Artillery/Genius/BLTouch/Configuration_adv.h index 39c4e8dc09..a7132f6bb2 100644 --- a/config/examples/Artillery/Genius/BLTouch/Configuration_adv.h +++ b/config/examples/Artillery/Genius/BLTouch/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Artillery/Genius/V1/Configuration_adv.h b/config/examples/Artillery/Genius/V1/Configuration_adv.h index 2d32709d4a..ec9ee7e7fd 100644 --- a/config/examples/Artillery/Genius/V1/Configuration_adv.h +++ b/config/examples/Artillery/Genius/V1/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Artillery/Hornet/Configuration_adv.h b/config/examples/Artillery/Hornet/Configuration_adv.h index e1d8dadb5a..e49e80531c 100644 --- a/config/examples/Artillery/Hornet/Configuration_adv.h +++ b/config/examples/Artillery/Hornet/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h b/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h index 6ebf25c367..0c42db4b32 100644 --- a/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h +++ b/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h b/config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h index 2d32709d4a..ec9ee7e7fd 100644 --- a/config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h +++ b/config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Artillery/Sidewinder X2/Configuration_adv.h b/config/examples/Artillery/Sidewinder X2/Configuration_adv.h index 79cbd7bf1b..73ce6e7bc7 100644 --- a/config/examples/Artillery/Sidewinder X2/Configuration_adv.h +++ b/config/examples/Artillery/Sidewinder X2/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h index 1298bed991..26d1c7f0e3 100644 --- a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/BIBO/TouchX/default/Configuration_adv.h b/config/examples/BIBO/TouchX/default/Configuration_adv.h index 7d2b0d4c91..ed0e5bb2cb 100644 --- a/config/examples/BIBO/TouchX/default/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/default/Configuration_adv.h @@ -4245,13 +4245,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/BIQU/B1 SE Plus/Configuration_adv.h b/config/examples/BIQU/B1 SE Plus/Configuration_adv.h index c9283ea9f9..8ac9df9617 100644 --- a/config/examples/BIQU/B1 SE Plus/Configuration_adv.h +++ b/config/examples/BIQU/B1 SE Plus/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/BIQU/B1 SE/Configuration_adv.h b/config/examples/BIQU/B1 SE/Configuration_adv.h index 97cc44ca8f..3672c5fc4b 100644 --- a/config/examples/BIQU/B1 SE/Configuration_adv.h +++ b/config/examples/BIQU/B1 SE/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/BIQU/B1/Configuration_adv.h b/config/examples/BIQU/B1/Configuration_adv.h index ba86444d30..3e924324f0 100644 --- a/config/examples/BIQU/B1/Configuration_adv.h +++ b/config/examples/BIQU/B1/Configuration_adv.h @@ -4250,13 +4250,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/BIQU/BX/Configuration_adv.h b/config/examples/BIQU/BX/Configuration_adv.h index feec5c42c4..2c95c5fd79 100644 --- a/config/examples/BIQU/BX/Configuration_adv.h +++ b/config/examples/BIQU/BX/Configuration_adv.h @@ -4249,13 +4249,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/BIQU/Hurakan/Configuration_adv.h b/config/examples/BIQU/Hurakan/Configuration_adv.h index be67b17805..f4c79f8f11 100644 --- a/config/examples/BIQU/Hurakan/Configuration_adv.h +++ b/config/examples/BIQU/Hurakan/Configuration_adv.h @@ -4249,13 +4249,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/BIQU/Thunder Standard/Configuration_adv.h b/config/examples/BIQU/Thunder Standard/Configuration_adv.h index 4026a154e8..203dad0ea5 100644 --- a/config/examples/BIQU/Thunder Standard/Configuration_adv.h +++ b/config/examples/BIQU/Thunder Standard/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/BQ/Hephestos/Configuration_adv.h b/config/examples/BQ/Hephestos/Configuration_adv.h index 5be923e29d..1cc5bbec9f 100644 --- a/config/examples/BQ/Hephestos/Configuration_adv.h +++ b/config/examples/BQ/Hephestos/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/BQ/Hephestos_2/Configuration_adv.h b/config/examples/BQ/Hephestos_2/Configuration_adv.h index a06386a612..99da2370ce 100644 --- a/config/examples/BQ/Hephestos_2/Configuration_adv.h +++ b/config/examples/BQ/Hephestos_2/Configuration_adv.h @@ -4256,13 +4256,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/BQ/WITBOX/Configuration_adv.h b/config/examples/BQ/WITBOX/Configuration_adv.h index 5be923e29d..1cc5bbec9f 100644 --- a/config/examples/BQ/WITBOX/Configuration_adv.h +++ b/config/examples/BQ/WITBOX/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/CTC/A13/Configuration_adv.h b/config/examples/CTC/A13/Configuration_adv.h index ea2138321e..66c1a861c4 100644 --- a/config/examples/CTC/A13/Configuration_adv.h +++ b/config/examples/CTC/A13/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/CTC/Bizer/Configuration_adv.h b/config/examples/CTC/Bizer/Configuration_adv.h index 3fe6cd031a..e824c5e4fc 100644 --- a/config/examples/CTC/Bizer/Configuration_adv.h +++ b/config/examples/CTC/Bizer/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Cartesio/Configuration_adv.h b/config/examples/Cartesio/Configuration_adv.h index 51a558a18b..395ca3e4d0 100644 --- a/config/examples/Cartesio/Configuration_adv.h +++ b/config/examples/Cartesio/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 7355ae8221..b075edf09f 100644 --- a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h index 64f86122cf..c33a195e43 100644 --- a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h index 03794933ca..34dc153340 100644 --- a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h @@ -4242,13 +4242,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h index 5cd93da0a1..a8eb901e62 100644 --- a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h index c6008d6296..7a1b0750f9 100644 --- a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration_adv.h b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration_adv.h index dfa95c1874..ce55546cdd 100644 --- a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration_adv.h @@ -4249,13 +4249,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h index 5cd93da0a1..a8eb901e62 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration_adv.h b/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration_adv.h index 22a57191a9..90d0274c1a 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Creality/CR-10 V2/Configuration_adv.h b/config/examples/Creality/CR-10 V2/Configuration_adv.h index c224a87b0e..003e8bf6ef 100644 --- a/config/examples/Creality/CR-10 V2/Configuration_adv.h +++ b/config/examples/Creality/CR-10 V2/Configuration_adv.h @@ -4251,13 +4251,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Creality/CR-10 V3/Configuration_adv.h b/config/examples/Creality/CR-10 V3/Configuration_adv.h index a43d1c7a24..7b541b5b19 100644 --- a/config/examples/Creality/CR-10 V3/Configuration_adv.h +++ b/config/examples/Creality/CR-10 V3/Configuration_adv.h @@ -4253,13 +4253,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 486044b6dd..3b3c17c8fe 100644 --- a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h index f1117f32be..619a0c5c77 100644 --- a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h index da666cce44..309a6fea28 100644 --- a/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h @@ -4251,13 +4251,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h index 1d1d470021..63c0445eb0 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration_adv.h index 4cd5420d50..ce307a578c 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 486044b6dd..3b3c17c8fe 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h index bd79612879..b1dfdf6d51 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h index 4255421bf4..9844faa894 100644 --- a/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Creality/CR-20 Pro/Configuration_adv.h b/config/examples/Creality/CR-20 Pro/Configuration_adv.h index 58771eba02..569b2da77c 100644 --- a/config/examples/Creality/CR-20 Pro/Configuration_adv.h +++ b/config/examples/Creality/CR-20 Pro/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration_adv.h b/config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration_adv.h index 685fa7a36f..7c84051042 100644 --- a/config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration_adv.h +++ b/config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Creality/CR-20/Stock/Configuration_adv.h b/config/examples/Creality/CR-20/Stock/Configuration_adv.h index 685fa7a36f..7c84051042 100644 --- a/config/examples/Creality/CR-20/Stock/Configuration_adv.h +++ b/config/examples/Creality/CR-20/Stock/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Creality/CR-30 PrintMill/Configuration_adv.h b/config/examples/Creality/CR-30 PrintMill/Configuration_adv.h index 4ddd13d063..ab5683ebd2 100644 --- a/config/examples/Creality/CR-30 PrintMill/Configuration_adv.h +++ b/config/examples/Creality/CR-30 PrintMill/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Creality/CR-6 SE/Configuration_adv.h b/config/examples/Creality/CR-6 SE/Configuration_adv.h index 1c2e679161..1b6ade1656 100644 --- a/config/examples/Creality/CR-6 SE/Configuration_adv.h +++ b/config/examples/Creality/CR-6 SE/Configuration_adv.h @@ -4235,13 +4235,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Creality/CR-8/Configuration_adv.h b/config/examples/Creality/CR-8/Configuration_adv.h index 24aeb0f200..5732f00db4 100644 --- a/config/examples/Creality/CR-8/Configuration_adv.h +++ b/config/examples/Creality/CR-8/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration_adv.h b/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration_adv.h index 9565c95c12..9b4749fce3 100644 --- a/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration_adv.h +++ b/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration_adv.h @@ -4249,13 +4249,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Creality/Ender-2/Configuration_adv.h b/config/examples/Creality/Ender-2/Configuration_adv.h index 261680aa5a..796c01b191 100644 --- a/config/examples/Creality/Ender-2/Configuration_adv.h +++ b/config/examples/Creality/Ender-2/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Creality/Ender-3 Max/Configuration_adv.h b/config/examples/Creality/Ender-3 Max/Configuration_adv.h index 86f1d9fcd1..c636f8d79d 100644 --- a/config/examples/Creality/Ender-3 Max/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Max/Configuration_adv.h @@ -4249,13 +4249,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Creality/Ender-3 Neo/Configuration_adv.h b/config/examples/Creality/Ender-3 Neo/Configuration_adv.h index 30d91d9d48..48b23500a5 100644 --- a/config/examples/Creality/Ender-3 Neo/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Neo/Configuration_adv.h @@ -4249,13 +4249,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h index edc2dfe28b..f0ddadf28a 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h index c82f02abf1..69c17138ae 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index c82f02abf1..69c17138ae 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 4e5a6effa3..dd18bee1bf 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h index a2e273e465..eb478cf6ce 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h index 4fb36368df..954a8d8ab5 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h index c7f1ae8f4c..4feffae5d1 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h index 5a7cb9e5ef..55b8aac882 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Creality/Ender-3 S1 Plus/Configuration_adv.h b/config/examples/Creality/Ender-3 S1 Plus/Configuration_adv.h index 95040229fa..108999049d 100644 --- a/config/examples/Creality/Ender-3 S1 Plus/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 S1 Plus/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Creality/Ender-3 S1 Pro/Configuration_adv.h b/config/examples/Creality/Ender-3 S1 Pro/Configuration_adv.h index 95040229fa..108999049d 100644 --- a/config/examples/Creality/Ender-3 S1 Pro/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 S1 Pro/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Creality/Ender-3 S1/STM32F1/Configuration_adv.h b/config/examples/Creality/Ender-3 S1/STM32F1/Configuration_adv.h index 7a5d7ffc50..71e6ae643a 100644 --- a/config/examples/Creality/Ender-3 S1/STM32F1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 S1/STM32F1/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Creality/Ender-3 S1/STM32F4/Configuration_adv.h b/config/examples/Creality/Ender-3 S1/STM32F4/Configuration_adv.h index cf210baa33..9ede56ed3a 100644 --- a/config/examples/Creality/Ender-3 S1/STM32F4/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 S1/STM32F4/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Creality/Ender-3 V2 Neo/Configuration_adv.h b/config/examples/Creality/Ender-3 V2 Neo/Configuration_adv.h index 42419b13be..84439c952c 100644 --- a/config/examples/Creality/Ender-3 V2 Neo/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2 Neo/Configuration_adv.h @@ -4249,13 +4249,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration_adv.h index e437980dd2..500d0dbf43 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration_adv.h @@ -4249,13 +4249,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration_adv.h index fde571003a..86ac89c8ab 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration_adv.h @@ -4249,13 +4249,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration_adv.h index aaa188f2fa..479951d992 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration_adv.h @@ -4249,13 +4249,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration_adv.h index 02ba39ab59..b17ebf7378 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration_adv.h @@ -4249,13 +4249,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration_adv.h index 6c00a81f11..a3c13a8b1a 100644 --- a/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration_adv.h @@ -4249,13 +4249,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration_adv.h index c93bdee033..72d9b05e9e 100644 --- a/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration_adv.h @@ -4249,13 +4249,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h index 4b541a47e1..a9d5cc40ee 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Creality/Ender-3/BigTreeTech Manta E3 EZ/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech Manta E3 EZ/Configuration_adv.h index 1746592439..dbbb7edcb8 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech Manta E3 EZ/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech Manta E3 EZ/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h index a6f5ff04a1..451205ab26 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h index 47da25ca4d..de7c795a06 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h index 6c30cd0adb..1724b8a1fb 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h index 47da25ca4d..de7c795a06 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h index 1af98d825b..00e1a96bd7 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h index 9293335457..14dc305051 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index 9293335457..14dc305051 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 995c304e76..d9ede5f828 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h index 0a95a7d1fe..4081e02f52 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h index 4fb36368df..954a8d8ab5 100644 --- a/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h index 304a064af2..ff3257c727 100644 --- a/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h index 5a7cb9e5ef..55b8aac882 100644 --- a/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h index a8e5765a14..5ee657359c 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h index a8e5765a14..5ee657359c 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration_adv.h index 2b59725695..3f4940cbcb 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h index a8e5765a14..5ee657359c 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h index a8e5765a14..5ee657359c 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h index 2f5e6a122b..5a0ee55f8c 100644 --- a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h @@ -4242,13 +4242,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h b/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h index 3a34cab598..0b58332588 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h b/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h index ef83867364..ada75f7684 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h index c2aaa8574a..a4cd581dbe 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration_adv.h b/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration_adv.h index 1ab2a85a62..14263ec87c 100644 --- a/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration_adv.h @@ -4246,13 +4246,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Creality/Ender-4/Configuration_adv.h b/config/examples/Creality/Ender-4/Configuration_adv.h index 38ea78d96d..ab28c3a684 100644 --- a/config/examples/Creality/Ender-4/Configuration_adv.h +++ b/config/examples/Creality/Ender-4/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Creality/Ender-5 Plus/BigTreeTech SKR 3/Configuration_adv.h b/config/examples/Creality/Ender-5 Plus/BigTreeTech SKR 3/Configuration_adv.h index f3b6ecf108..32d64e6f44 100644 --- a/config/examples/Creality/Ender-5 Plus/BigTreeTech SKR 3/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Plus/BigTreeTech SKR 3/Configuration_adv.h @@ -4249,13 +4249,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Creality/Ender-5 Plus/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-5 Plus/CrealityV1/Configuration_adv.h index 378ed3f409..82a3e29ccf 100644 --- a/config/examples/Creality/Ender-5 Plus/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Plus/CrealityV1/Configuration_adv.h @@ -4249,13 +4249,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h index 602959ac74..006988dc1f 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index f017588fdf..15a2284894 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h index f38e4136ca..13d76e8158 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 3.0 with BLTouch-HighTemp/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 3.0 with BLTouch-HighTemp/Configuration_adv.h index 3b6338bdc5..8ed6900020 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 3.0 with BLTouch-HighTemp/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 3.0 with BLTouch-HighTemp/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h index da4776bc13..f016c6b696 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h index 8bfd4d4563..233406fa15 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h @@ -4249,13 +4249,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h index ab4fa56216..faf19efc66 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Creality/Ender-5 S1/Configuration_adv.h b/config/examples/Creality/Ender-5 S1/Configuration_adv.h index 1f29374860..c8785f0f5f 100644 --- a/config/examples/Creality/Ender-5 S1/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 S1/Configuration_adv.h @@ -4254,13 +4254,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h index 602959ac74..006988dc1f 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h index ad79022de9..54bbf89de1 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index f71ac0d465..9a4e50cbd7 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index eafaa74079..779b413e23 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 3.0 with BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 3.0 with BLTouch/Configuration_adv.h index 755c5a63c6..ea62f1d839 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 3.0 with BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 3.0 with BLTouch/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h index 21bc2f14d0..15bf7c3f3f 100644 --- a/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h index c286da520e..643214cb7f 100644 --- a/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Creality/Ender-6/Configuration_adv.h b/config/examples/Creality/Ender-6/Configuration_adv.h index c31dab3835..d73a62e12c 100644 --- a/config/examples/Creality/Ender-6/Configuration_adv.h +++ b/config/examples/Creality/Ender-6/Configuration_adv.h @@ -4249,13 +4249,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h index 44c01ddf54..01a0fc326e 100644 --- a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h +++ b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Daycom/3DP-100/Configuration_adv.h b/config/examples/Daycom/3DP-100/Configuration_adv.h index 96bd803085..b934ed9e7d 100644 --- a/config/examples/Daycom/3DP-100/Configuration_adv.h +++ b/config/examples/Daycom/3DP-100/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h b/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h index e40307888b..928c97824b 100644 --- a/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h +++ b/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h @@ -4245,13 +4245,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/EasyThreeD/ET4000PLUS/Configuration_adv.h b/config/examples/EasyThreeD/ET4000PLUS/Configuration_adv.h index 01d2f3e7e6..20129a06f2 100644 --- a/config/examples/EasyThreeD/ET4000PLUS/Configuration_adv.h +++ b/config/examples/EasyThreeD/ET4000PLUS/Configuration_adv.h @@ -4250,13 +4250,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Einstart-S/Configuration_adv.h b/config/examples/Einstart-S/Configuration_adv.h index c3051548ec..4a2bf874aa 100644 --- a/config/examples/Einstart-S/Configuration_adv.h +++ b/config/examples/Einstart-S/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Elegoo/Neptune 2/Configuration_adv.h b/config/examples/Elegoo/Neptune 2/Configuration_adv.h index 572d852a54..0982f1dc6a 100644 --- a/config/examples/Elegoo/Neptune 2/Configuration_adv.h +++ b/config/examples/Elegoo/Neptune 2/Configuration_adv.h @@ -4249,13 +4249,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Eryone/Thinker SE/Configuration_adv.h b/config/examples/Eryone/Thinker SE/Configuration_adv.h index 5d0872015a..d3a70c2684 100644 --- a/config/examples/Eryone/Thinker SE/Configuration_adv.h +++ b/config/examples/Eryone/Thinker SE/Configuration_adv.h @@ -4254,13 +4254,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Eryone/Thinker V2/Configuration_adv.h b/config/examples/Eryone/Thinker V2/Configuration_adv.h index 3fa542afd4..f1f8bc13b9 100644 --- a/config/examples/Eryone/Thinker V2/Configuration_adv.h +++ b/config/examples/Eryone/Thinker V2/Configuration_adv.h @@ -4254,13 +4254,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/FYSETC/AIO_II/Configuration_adv.h b/config/examples/FYSETC/AIO_II/Configuration_adv.h index 48039a7299..16a1e543d3 100644 --- a/config/examples/FYSETC/AIO_II/Configuration_adv.h +++ b/config/examples/FYSETC/AIO_II/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/FYSETC/F6_13/Configuration_adv.h b/config/examples/FYSETC/F6_13/Configuration_adv.h index e1975741b0..6d0bc28b47 100644 --- a/config/examples/FYSETC/F6_13/Configuration_adv.h +++ b/config/examples/FYSETC/F6_13/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/FYSETC/S6/Configuration_adv.h b/config/examples/FYSETC/S6/Configuration_adv.h index 77de53e23c..732bb93b78 100644 --- a/config/examples/FYSETC/S6/Configuration_adv.h +++ b/config/examples/FYSETC/S6/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Felix/DUAL/Configuration_adv.h b/config/examples/Felix/DUAL/Configuration_adv.h index d91c8b552e..ba46c39843 100644 --- a/config/examples/Felix/DUAL/Configuration_adv.h +++ b/config/examples/Felix/DUAL/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Felix/Single/Configuration_adv.h b/config/examples/Felix/Single/Configuration_adv.h index d91c8b552e..ba46c39843 100644 --- a/config/examples/Felix/Single/Configuration_adv.h +++ b/config/examples/Felix/Single/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/FlashForge/Creator 2X/Configuration_adv.h b/config/examples/FlashForge/Creator 2X/Configuration_adv.h index 76b53a0503..17671aee68 100644 --- a/config/examples/FlashForge/Creator 2X/Configuration_adv.h +++ b/config/examples/FlashForge/Creator 2X/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/FlashForge/CreatorPro/Configuration_adv.h b/config/examples/FlashForge/CreatorPro/Configuration_adv.h index 2ddd1b1783..f79202b8ef 100644 --- a/config/examples/FlashForge/CreatorPro/Configuration_adv.h +++ b/config/examples/FlashForge/CreatorPro/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/FlyingBear/P902/Configuration_adv.h b/config/examples/FlyingBear/P902/Configuration_adv.h index 5880b2ebcc..6af0b8f5ec 100644 --- a/config/examples/FlyingBear/P902/Configuration_adv.h +++ b/config/examples/FlyingBear/P902/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/FlyingBear/P905H/Configuration_adv.h b/config/examples/FlyingBear/P905H/Configuration_adv.h index ec5bfd1eab..d4358657c6 100644 --- a/config/examples/FlyingBear/P905H/Configuration_adv.h +++ b/config/examples/FlyingBear/P905H/Configuration_adv.h @@ -4251,13 +4251,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/FoamCutter/generic/Configuration_adv.h b/config/examples/FoamCutter/generic/Configuration_adv.h index bd63112f09..41304b930d 100644 --- a/config/examples/FoamCutter/generic/Configuration_adv.h +++ b/config/examples/FoamCutter/generic/Configuration_adv.h @@ -4256,13 +4256,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/FoamCutter/rcKeith/Configuration_adv.h b/config/examples/FoamCutter/rcKeith/Configuration_adv.h index bd63112f09..41304b930d 100644 --- a/config/examples/FoamCutter/rcKeith/Configuration_adv.h +++ b/config/examples/FoamCutter/rcKeith/Configuration_adv.h @@ -4256,13 +4256,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/FolgerTech/FT-5 R2/Configuration_adv.h b/config/examples/FolgerTech/FT-5 R2/Configuration_adv.h index 6a01e492d6..c502cae1cb 100644 --- a/config/examples/FolgerTech/FT-5 R2/Configuration_adv.h +++ b/config/examples/FolgerTech/FT-5 R2/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/config/examples/FolgerTech/i3-2020/Configuration_adv.h index 8ceac52857..63ee589ce7 100644 --- a/config/examples/FolgerTech/i3-2020/Configuration_adv.h +++ b/config/examples/FolgerTech/i3-2020/Configuration_adv.h @@ -4256,13 +4256,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Formbot/Raptor/Configuration_adv.h b/config/examples/Formbot/Raptor/Configuration_adv.h index 5e23ebbf43..771b7c1b9f 100644 --- a/config/examples/Formbot/Raptor/Configuration_adv.h +++ b/config/examples/Formbot/Raptor/Configuration_adv.h @@ -4253,13 +4253,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h index d97224eeb6..844b408cbb 100644 --- a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h +++ b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Formbot/T_Rex_3/Configuration_adv.h b/config/examples/Formbot/T_Rex_3/Configuration_adv.h index a1af306ab1..7869d7aac0 100644 --- a/config/examples/Formbot/T_Rex_3/Configuration_adv.h +++ b/config/examples/Formbot/T_Rex_3/Configuration_adv.h @@ -4256,13 +4256,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Geeetech/A10/Configuration_adv.h b/config/examples/Geeetech/A10/Configuration_adv.h index ed318d5ea6..bcc915eeb2 100644 --- a/config/examples/Geeetech/A10/Configuration_adv.h +++ b/config/examples/Geeetech/A10/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Geeetech/A10D/Configuration_adv.h b/config/examples/Geeetech/A10D/Configuration_adv.h index 7c0ff887ef..aa30739fc4 100644 --- a/config/examples/Geeetech/A10D/Configuration_adv.h +++ b/config/examples/Geeetech/A10D/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Geeetech/A10M/Stock LCD/Configuration_adv.h b/config/examples/Geeetech/A10M/Stock LCD/Configuration_adv.h index e442823103..7eba1b0257 100644 --- a/config/examples/Geeetech/A10M/Stock LCD/Configuration_adv.h +++ b/config/examples/Geeetech/A10M/Stock LCD/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration_adv.h b/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration_adv.h index e442823103..7eba1b0257 100644 --- a/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration_adv.h +++ b/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Geeetech/A10PRO/Configuration_adv.h b/config/examples/Geeetech/A10PRO/Configuration_adv.h index ed318d5ea6..bcc915eeb2 100644 --- a/config/examples/Geeetech/A10PRO/Configuration_adv.h +++ b/config/examples/Geeetech/A10PRO/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Geeetech/A10T/Stock LCD/Configuration_adv.h b/config/examples/Geeetech/A10T/Stock LCD/Configuration_adv.h index e442823103..7eba1b0257 100644 --- a/config/examples/Geeetech/A10T/Stock LCD/Configuration_adv.h +++ b/config/examples/Geeetech/A10T/Stock LCD/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration_adv.h b/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration_adv.h index e442823103..7eba1b0257 100644 --- a/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration_adv.h +++ b/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Geeetech/A20/Configuration_adv.h b/config/examples/Geeetech/A20/Configuration_adv.h index 032e626349..c35a4056dc 100644 --- a/config/examples/Geeetech/A20/Configuration_adv.h +++ b/config/examples/Geeetech/A20/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Geeetech/A20M/Configuration_adv.h b/config/examples/Geeetech/A20M/Configuration_adv.h index 032e626349..c35a4056dc 100644 --- a/config/examples/Geeetech/A20M/Configuration_adv.h +++ b/config/examples/Geeetech/A20M/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Geeetech/A20T/Configuration_adv.h b/config/examples/Geeetech/A20T/Configuration_adv.h index 032e626349..c35a4056dc 100644 --- a/config/examples/Geeetech/A20T/Configuration_adv.h +++ b/config/examples/Geeetech/A20T/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Geeetech/A30/Configuration_adv.h b/config/examples/Geeetech/A30/Configuration_adv.h index 22750c8d39..f0bc306eae 100644 --- a/config/examples/Geeetech/A30/Configuration_adv.h +++ b/config/examples/Geeetech/A30/Configuration_adv.h @@ -4247,13 +4247,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Geeetech/A30M/Configuration_adv.h b/config/examples/Geeetech/A30M/Configuration_adv.h index 22750c8d39..f0bc306eae 100644 --- a/config/examples/Geeetech/A30M/Configuration_adv.h +++ b/config/examples/Geeetech/A30M/Configuration_adv.h @@ -4247,13 +4247,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Geeetech/A30T/Configuration_adv.h b/config/examples/Geeetech/A30T/Configuration_adv.h index 22750c8d39..f0bc306eae 100644 --- a/config/examples/Geeetech/A30T/Configuration_adv.h +++ b/config/examples/Geeetech/A30T/Configuration_adv.h @@ -4247,13 +4247,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Geeetech/D200/Configuration_adv.h b/config/examples/Geeetech/D200/Configuration_adv.h index 26e34ed6b5..5da88e7510 100644 --- a/config/examples/Geeetech/D200/Configuration_adv.h +++ b/config/examples/Geeetech/D200/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Geeetech/Duplicator5/Configuration_adv.h b/config/examples/Geeetech/Duplicator5/Configuration_adv.h index 77de53e23c..732bb93b78 100644 --- a/config/examples/Geeetech/Duplicator5/Configuration_adv.h +++ b/config/examples/Geeetech/Duplicator5/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Geeetech/E180/Configuration_adv.h b/config/examples/Geeetech/E180/Configuration_adv.h index 22750c8d39..f0bc306eae 100644 --- a/config/examples/Geeetech/E180/Configuration_adv.h +++ b/config/examples/Geeetech/E180/Configuration_adv.h @@ -4247,13 +4247,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Geeetech/M201/Configuration_adv.h b/config/examples/Geeetech/M201/Configuration_adv.h index 26e34ed6b5..5da88e7510 100644 --- a/config/examples/Geeetech/M201/Configuration_adv.h +++ b/config/examples/Geeetech/M201/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Geeetech/MeCreator2/Configuration_adv.h b/config/examples/Geeetech/MeCreator2/Configuration_adv.h index efbecf01b0..b2dc985a1a 100644 --- a/config/examples/Geeetech/MeCreator2/Configuration_adv.h +++ b/config/examples/Geeetech/MeCreator2/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Geeetech/Me_creator/Configuration_adv.h b/config/examples/Geeetech/Me_creator/Configuration_adv.h index 77de53e23c..732bb93b78 100644 --- a/config/examples/Geeetech/Me_creator/Configuration_adv.h +++ b/config/examples/Geeetech/Me_creator/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Geeetech/Me_ducer/Configuration_adv.h b/config/examples/Geeetech/Me_ducer/Configuration_adv.h index 3cbb4c5292..116eb8ba6a 100644 --- a/config/examples/Geeetech/Me_ducer/Configuration_adv.h +++ b/config/examples/Geeetech/Me_ducer/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Geeetech/PI3A PRO/Configuration_adv.h b/config/examples/Geeetech/PI3A PRO/Configuration_adv.h index 34e0d414da..f1b84b8ad7 100644 --- a/config/examples/Geeetech/PI3A PRO/Configuration_adv.h +++ b/config/examples/Geeetech/PI3A PRO/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h index ed318d5ea6..bcc915eeb2 100644 --- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h index ed318d5ea6..bcc915eeb2 100644 --- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/HMS434/Configuration_adv.h b/config/examples/HMS434/Configuration_adv.h index 0d3aa25bef..dca5499962 100644 --- a/config/examples/HMS434/Configuration_adv.h +++ b/config/examples/HMS434/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Infitary/i3-M508/Configuration_adv.h b/config/examples/Infitary/i3-M508/Configuration_adv.h index 4672605c45..bd6991cb8b 100644 --- a/config/examples/Infitary/i3-M508/Configuration_adv.h +++ b/config/examples/Infitary/i3-M508/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h b/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h index 03a15f3303..dbfaeeeef6 100644 --- a/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h +++ b/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h @@ -4244,13 +4244,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/JGAurora/A1/Configuration_adv.h b/config/examples/JGAurora/A1/Configuration_adv.h index de309521e2..43c7436619 100644 --- a/config/examples/JGAurora/A1/Configuration_adv.h +++ b/config/examples/JGAurora/A1/Configuration_adv.h @@ -4254,13 +4254,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/JGAurora/A5/Configuration_adv.h b/config/examples/JGAurora/A5/Configuration_adv.h index ffce5ea0c9..930027dd53 100644 --- a/config/examples/JGAurora/A5/Configuration_adv.h +++ b/config/examples/JGAurora/A5/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/JGAurora/A5S/Configuration_adv.h b/config/examples/JGAurora/A5S/Configuration_adv.h index 30c64b0a67..027a9bdeb3 100644 --- a/config/examples/JGAurora/A5S/Configuration_adv.h +++ b/config/examples/JGAurora/A5S/Configuration_adv.h @@ -4254,13 +4254,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/JGAurora/Magic/Configuration_adv.h b/config/examples/JGAurora/Magic/Configuration_adv.h index b39b349134..60b5f00c6f 100644 --- a/config/examples/JGAurora/Magic/Configuration_adv.h +++ b/config/examples/JGAurora/Magic/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Kingroon/KP3/Configuration_adv.h b/config/examples/Kingroon/KP3/Configuration_adv.h index 25f027ac2c..d223af1e53 100644 --- a/config/examples/Kingroon/KP3/Configuration_adv.h +++ b/config/examples/Kingroon/KP3/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Kingroon/KP3S_Pro/Configuration_adv.h b/config/examples/Kingroon/KP3S_Pro/Configuration_adv.h index 12d2c921c9..90549203f4 100644 --- a/config/examples/Kingroon/KP3S_Pro/Configuration_adv.h +++ b/config/examples/Kingroon/KP3S_Pro/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Kingroon/KP5L/Configuration_adv.h b/config/examples/Kingroon/KP5L/Configuration_adv.h index 66db61eea9..3d5fbee591 100644 --- a/config/examples/Kingroon/KP5L/Configuration_adv.h +++ b/config/examples/Kingroon/KP5L/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Labists/ET4/Configuration_adv.h b/config/examples/Labists/ET4/Configuration_adv.h index 7fbf29b847..818b9bdad4 100644 --- a/config/examples/Labists/ET4/Configuration_adv.h +++ b/config/examples/Labists/ET4/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Longer/LK5/Configuration_adv.h b/config/examples/Longer/LK5/Configuration_adv.h index 59bc37c470..b9e1b54e45 100644 --- a/config/examples/Longer/LK5/Configuration_adv.h +++ b/config/examples/Longer/LK5/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/LulzBot/Mini2/Teensy/Configuration_adv.h b/config/examples/LulzBot/Mini2/Teensy/Configuration_adv.h index 235d010bf0..55ccd7badf 100644 --- a/config/examples/LulzBot/Mini2/Teensy/Configuration_adv.h +++ b/config/examples/LulzBot/Mini2/Teensy/Configuration_adv.h @@ -4250,13 +4250,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/LulzBot/TAZ4/Configuration_adv.h b/config/examples/LulzBot/TAZ4/Configuration_adv.h index 0b7ad9389f..ff80cd5a1b 100644 --- a/config/examples/LulzBot/TAZ4/Configuration_adv.h +++ b/config/examples/LulzBot/TAZ4/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/MBot/Cube/Configuration_adv.h b/config/examples/MBot/Cube/Configuration_adv.h index 2db532989a..c63a6a48c6 100644 --- a/config/examples/MBot/Cube/Configuration_adv.h +++ b/config/examples/MBot/Cube/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h b/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h index 96706dd2c2..2a87dfc945 100644 --- a/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h +++ b/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h @@ -4242,13 +4242,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/MakerParts/Configuration_adv.h b/config/examples/MakerParts/Configuration_adv.h index 8e6e95034b..b98b9f2c95 100644 --- a/config/examples/MakerParts/Configuration_adv.h +++ b/config/examples/MakerParts/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/MakerTech3D/Proforge2sDual/Configuration_adv.h b/config/examples/MakerTech3D/Proforge2sDual/Configuration_adv.h index 7b7bd1b9c3..77020b70f1 100644 --- a/config/examples/MakerTech3D/Proforge2sDual/Configuration_adv.h +++ b/config/examples/MakerTech3D/Proforge2sDual/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Malyan/M150/Configuration_adv.h b/config/examples/Malyan/M150/Configuration_adv.h index 63ab466e91..04b084175a 100644 --- a/config/examples/Malyan/M150/Configuration_adv.h +++ b/config/examples/Malyan/M150/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Malyan/M200/Configuration_adv.h b/config/examples/Malyan/M200/Configuration_adv.h index 4ec19270f4..1eaf284943 100644 --- a/config/examples/Malyan/M200/Configuration_adv.h +++ b/config/examples/Malyan/M200/Configuration_adv.h @@ -4250,13 +4250,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Micromake/C1/basic/Configuration_adv.h b/config/examples/Micromake/C1/basic/Configuration_adv.h index 281f551bb4..faac86e5c5 100644 --- a/config/examples/Micromake/C1/basic/Configuration_adv.h +++ b/config/examples/Micromake/C1/basic/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/config/examples/Micromake/C1/enhanced/Configuration_adv.h index 65287aef69..f6744ac79f 100644 --- a/config/examples/Micromake/C1/enhanced/Configuration_adv.h +++ b/config/examples/Micromake/C1/enhanced/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Mks/Robin_Lite3/Configuration_adv.h b/config/examples/Mks/Robin_Lite3/Configuration_adv.h index c0c44305a0..b2d6e20fcb 100644 --- a/config/examples/Mks/Robin_Lite3/Configuration_adv.h +++ b/config/examples/Mks/Robin_Lite3/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Mks/Sbase/Configuration_adv.h b/config/examples/Mks/Sbase/Configuration_adv.h index 6bed3b80ca..196b80144f 100644 --- a/config/examples/Mks/Sbase/Configuration_adv.h +++ b/config/examples/Mks/Sbase/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Modix/Big60/Configuration_adv.h b/config/examples/Modix/Big60/Configuration_adv.h index feccc789df..101b26e2f5 100644 --- a/config/examples/Modix/Big60/Configuration_adv.h +++ b/config/examples/Modix/Big60/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Nextion/Configuration_adv.h b/config/examples/Nextion/Configuration_adv.h index 4cbd913744..cbfc138595 100644 --- a/config/examples/Nextion/Configuration_adv.h +++ b/config/examples/Nextion/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/ORD Bot/Hadron/Sanguinololu/Configuration_adv.h b/config/examples/ORD Bot/Hadron/Sanguinololu/Configuration_adv.h index 9b831e89f9..3671650e20 100644 --- a/config/examples/ORD Bot/Hadron/Sanguinololu/Configuration_adv.h +++ b/config/examples/ORD Bot/Hadron/Sanguinololu/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Opulo/Lumen_REV3/Configuration_adv.h b/config/examples/Opulo/Lumen_REV3/Configuration_adv.h index df613e0cb0..1ba2521889 100644 --- a/config/examples/Opulo/Lumen_REV3/Configuration_adv.h +++ b/config/examples/Opulo/Lumen_REV3/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Opulo/Lumen_REV4/Configuration_adv.h b/config/examples/Opulo/Lumen_REV4/Configuration_adv.h index c0c2569d4b..abc7ff5f01 100644 --- a/config/examples/Opulo/Lumen_REV4/Configuration_adv.h +++ b/config/examples/Opulo/Lumen_REV4/Configuration_adv.h @@ -4247,13 +4247,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Ortur 4/Configuration_adv.h b/config/examples/Ortur 4/Configuration_adv.h index 9268acb40c..bf28b7ffd4 100644 --- a/config/examples/Ortur 4/Configuration_adv.h +++ b/config/examples/Ortur 4/Configuration_adv.h @@ -4246,13 +4246,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Polargraph/Configuration_adv.h b/config/examples/Polargraph/Configuration_adv.h index d53008327e..be14279ce7 100644 --- a/config/examples/Polargraph/Configuration_adv.h +++ b/config/examples/Polargraph/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Prusa/MK3/Configuration_adv.h b/config/examples/Prusa/MK3/Configuration_adv.h index 9c28388378..721f40da68 100644 --- a/config/examples/Prusa/MK3/Configuration_adv.h +++ b/config/examples/Prusa/MK3/Configuration_adv.h @@ -4254,13 +4254,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h index 53fbeeda7d..05c0ddadb8 100644 --- a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h +++ b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h @@ -4253,13 +4253,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Qidi/Qidi 1/Configuration_adv.h b/config/examples/Qidi/Qidi 1/Configuration_adv.h index 710989747b..330c7ff074 100644 --- a/config/examples/Qidi/Qidi 1/Configuration_adv.h +++ b/config/examples/Qidi/Qidi 1/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Raiscube/A8r/Configuration_adv.h b/config/examples/Raiscube/A8r/Configuration_adv.h index 240b87bba7..0eb08a3d4a 100644 --- a/config/examples/Raiscube/A8r/Configuration_adv.h +++ b/config/examples/Raiscube/A8r/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/RapideLite/RL200/Configuration_adv.h b/config/examples/RapideLite/RL200/Configuration_adv.h index 77de53e23c..732bb93b78 100644 --- a/config/examples/RapideLite/RL200/Configuration_adv.h +++ b/config/examples/RapideLite/RL200/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Renkforce/RF100/Configuration_adv.h b/config/examples/Renkforce/RF100/Configuration_adv.h index 2f2c572570..7f325bda05 100644 --- a/config/examples/Renkforce/RF100/Configuration_adv.h +++ b/config/examples/Renkforce/RF100/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Renkforce/RF100XL/Configuration_adv.h b/config/examples/Renkforce/RF100XL/Configuration_adv.h index 2f2c572570..7f325bda05 100644 --- a/config/examples/Renkforce/RF100XL/Configuration_adv.h +++ b/config/examples/Renkforce/RF100XL/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Renkforce/RF100v2/Configuration_adv.h b/config/examples/Renkforce/RF100v2/Configuration_adv.h index 2f2c572570..7f325bda05 100644 --- a/config/examples/Renkforce/RF100v2/Configuration_adv.h +++ b/config/examples/Renkforce/RF100v2/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/RepRapWorld/Minitronics20/CNC/Configuration_adv.h b/config/examples/RepRapWorld/Minitronics20/CNC/Configuration_adv.h index 08de346fc6..62ac389066 100644 --- a/config/examples/RepRapWorld/Minitronics20/CNC/Configuration_adv.h +++ b/config/examples/RepRapWorld/Minitronics20/CNC/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/RigidBot/Configuration_adv.h b/config/examples/RigidBot/Configuration_adv.h index f86cef69a0..22329d8a87 100644 --- a/config/examples/RigidBot/Configuration_adv.h +++ b/config/examples/RigidBot/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/SCARA/MP_SCARA/Configuration_adv.h b/config/examples/SCARA/MP_SCARA/Configuration_adv.h index 2a4d80ab52..9a702be3bf 100644 --- a/config/examples/SCARA/MP_SCARA/Configuration_adv.h +++ b/config/examples/SCARA/MP_SCARA/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/SCARA/Morgan/Configuration_adv.h b/config/examples/SCARA/Morgan/Configuration_adv.h index fd63e283e2..51aaecc8e8 100644 --- a/config/examples/SCARA/Morgan/Configuration_adv.h +++ b/config/examples/SCARA/Morgan/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h index 2d2dfbeb6d..006efbf0d8 100644 --- a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h +++ b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Simax/Mi-M200/Configuration_adv.h b/config/examples/Simax/Mi-M200/Configuration_adv.h index 2e8692c2a4..fd1c751b37 100644 --- a/config/examples/Simax/Mi-M200/Configuration_adv.h +++ b/config/examples/Simax/Mi-M200/Configuration_adv.h @@ -4249,13 +4249,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Simulator/Configuration_adv.h b/config/examples/Simulator/Configuration_adv.h index 980f7b448c..4bfd55bac3 100644 --- a/config/examples/Simulator/Configuration_adv.h +++ b/config/examples/Simulator/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration_adv.h b/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration_adv.h index 0934459922..a20d6d4109 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration_adv.h @@ -4249,13 +4249,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index c768c60840..c177a8fc19 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -4249,13 +4249,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h index c5bb4fc4f2..fb66f61a96 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h b/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h index ecb2189a17..48db5d0b32 100644 --- a/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h @@ -4250,13 +4250,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h b/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h index 4cf4c38930..e110ee0399 100644 --- a/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h @@ -4250,13 +4250,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Sovol/SV-02/Configuration_adv.h b/config/examples/Sovol/SV-02/Configuration_adv.h index fb993f1988..45f5254715 100644 --- a/config/examples/Sovol/SV-02/Configuration_adv.h +++ b/config/examples/Sovol/SV-02/Configuration_adv.h @@ -4250,13 +4250,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Sovol/SV-03/Configuration_adv.h b/config/examples/Sovol/SV-03/Configuration_adv.h index 502664cba5..b0db629214 100644 --- a/config/examples/Sovol/SV-03/Configuration_adv.h +++ b/config/examples/Sovol/SV-03/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Sunlu/S8/Configuration_adv.h b/config/examples/Sunlu/S8/Configuration_adv.h index e576fb2726..20ea8ec246 100644 --- a/config/examples/Sunlu/S8/Configuration_adv.h +++ b/config/examples/Sunlu/S8/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Sunlu/T3/Configuration_adv.h b/config/examples/Sunlu/T3/Configuration_adv.h index d88d4528f1..11d93dc7c8 100644 --- a/config/examples/Sunlu/T3/Configuration_adv.h +++ b/config/examples/Sunlu/T3/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h b/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h index 806c461577..5f05ac2a67 100644 --- a/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h +++ b/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Tevo/Michelangelo/Configuration_adv.h b/config/examples/Tevo/Michelangelo/Configuration_adv.h index fa15c55d4a..f57e4c29bf 100644 --- a/config/examples/Tevo/Michelangelo/Configuration_adv.h +++ b/config/examples/Tevo/Michelangelo/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Tevo/Nereus/Configuration_adv.h b/config/examples/Tevo/Nereus/Configuration_adv.h index c92cd5d57a..ef29c36e74 100644 --- a/config/examples/Tevo/Nereus/Configuration_adv.h +++ b/config/examples/Tevo/Nereus/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Tevo/Tarantula Pro/MKS Gen_L/Configuration_adv.h b/config/examples/Tevo/Tarantula Pro/MKS Gen_L/Configuration_adv.h index e4dbac50bd..13fa92434a 100644 --- a/config/examples/Tevo/Tarantula Pro/MKS Gen_L/Configuration_adv.h +++ b/config/examples/Tevo/Tarantula Pro/MKS Gen_L/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Tevo/Tarantula Pro/MKS SGen_L/Configuration_adv.h b/config/examples/Tevo/Tarantula Pro/MKS SGen_L/Configuration_adv.h index d7fb8cce29..c0f01c2d0b 100644 --- a/config/examples/Tevo/Tarantula Pro/MKS SGen_L/Configuration_adv.h +++ b/config/examples/Tevo/Tarantula Pro/MKS SGen_L/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h index b2e43329f5..4eea8f20b1 100644 --- a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h +++ b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Tevo/Tornado/V2 (MKS Gen_L)/Configuration_adv.h b/config/examples/Tevo/Tornado/V2 (MKS Gen_L)/Configuration_adv.h index b2e43329f5..4eea8f20b1 100644 --- a/config/examples/Tevo/Tornado/V2 (MKS Gen_L)/Configuration_adv.h +++ b/config/examples/Tevo/Tornado/V2 (MKS Gen_L)/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration_adv.h b/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration_adv.h index 6fc08b07cd..e726bf2ba4 100644 --- a/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration_adv.h +++ b/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/TinyBoy2/Configuration_adv.h b/config/examples/TinyBoy2/Configuration_adv.h index 538823a565..13b9a9c6b7 100644 --- a/config/examples/TinyBoy2/Configuration_adv.h +++ b/config/examples/TinyBoy2/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Tronxy/D01/CXY-v6-191017 board/Configuration_adv.h b/config/examples/Tronxy/D01/CXY-v6-191017 board/Configuration_adv.h index f9bb29fc87..64be39b2c6 100644 --- a/config/examples/Tronxy/D01/CXY-v6-191017 board/Configuration_adv.h +++ b/config/examples/Tronxy/D01/CXY-v6-191017 board/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Tronxy/X3A/Configuration_adv.h b/config/examples/Tronxy/X3A/Configuration_adv.h index 7a7f450d9b..2054d8ee2d 100644 --- a/config/examples/Tronxy/X3A/Configuration_adv.h +++ b/config/examples/Tronxy/X3A/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration_adv.h b/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration_adv.h index a986c562f3..e6d528ac7c 100644 --- a/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration_adv.h +++ b/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration_adv.h b/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration_adv.h index 67d87f65ef..d76488efd2 100644 --- a/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration_adv.h +++ b/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Tronxy/X5SA-2E/Configuration_adv.h b/config/examples/Tronxy/X5SA-2E/Configuration_adv.h index d5ef9deb09..2ed4ef4ed1 100644 --- a/config/examples/Tronxy/X5SA-2E/Configuration_adv.h +++ b/config/examples/Tronxy/X5SA-2E/Configuration_adv.h @@ -4252,13 +4252,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Tronxy/X5SA/Configuration_adv.h b/config/examples/Tronxy/X5SA/Configuration_adv.h index 9c665da1a2..8c578f5830 100644 --- a/config/examples/Tronxy/X5SA/Configuration_adv.h +++ b/config/examples/Tronxy/X5SA/Configuration_adv.h @@ -4252,13 +4252,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Tronxy/XY2-Pro/Configuration_adv.h b/config/examples/Tronxy/XY2-Pro/Configuration_adv.h index 63b8d03451..c0b7f3e0f9 100644 --- a/config/examples/Tronxy/XY2-Pro/Configuration_adv.h +++ b/config/examples/Tronxy/XY2-Pro/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Two Trees/BlueR Plus/Configuration_adv.h b/config/examples/Two Trees/BlueR Plus/Configuration_adv.h index dee6536e27..8a73597337 100644 --- a/config/examples/Two Trees/BlueR Plus/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR Plus/Configuration_adv.h @@ -4247,13 +4247,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h b/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h index a8273e1ca5..d0321bee9a 100644 --- a/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h @@ -4249,13 +4249,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h b/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h index a8273e1ca5..d0321bee9a 100644 --- a/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h @@ -4249,13 +4249,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h b/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h index a8273e1ca5..d0321bee9a 100644 --- a/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h @@ -4249,13 +4249,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration_adv.h b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration_adv.h index 60ddf2bcd0..dbb930a442 100644 --- a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration_adv.h +++ b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration_adv.h @@ -4255,13 +4255,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h index 9d50222fd5..312ed66709 100644 --- a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h +++ b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h @@ -4255,13 +4255,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h b/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h index 75159eb642..ecebaeb094 100644 --- a/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h +++ b/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h @@ -4249,13 +4249,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/UltiMachine/Archim1/Configuration_adv.h b/config/examples/UltiMachine/Archim1/Configuration_adv.h index 765eb9eb10..a0922fef92 100644 --- a/config/examples/UltiMachine/Archim1/Configuration_adv.h +++ b/config/examples/UltiMachine/Archim1/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/UltiMachine/Archim2/Configuration_adv.h b/config/examples/UltiMachine/Archim2/Configuration_adv.h index b9e535b45a..d8cbe4873c 100644 --- a/config/examples/UltiMachine/Archim2/Configuration_adv.h +++ b/config/examples/UltiMachine/Archim2/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Ultimaker/Ultimaker 2+/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker 2+/Configuration_adv.h index ee2a410e98..4bd8d23544 100644 --- a/config/examples/Ultimaker/Ultimaker 2+/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker 2+/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Ultimaker/Ultimaker 2/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker 2/Configuration_adv.h index ec06d5faa8..f1741169f1 100644 --- a/config/examples/Ultimaker/Ultimaker 2/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker 2/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h index ee63817df0..46c1d39375 100644 --- a/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration_adv.h index 1edc509b1c..154f3c52a7 100644 --- a/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration_adv.h index 248c49e3a8..b7055597ef 100644 --- a/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration_adv.h @@ -4246,13 +4246,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/VORONDesign/Configuration_adv.h b/config/examples/VORONDesign/Configuration_adv.h index 49ed587741..5114384039 100644 --- a/config/examples/VORONDesign/Configuration_adv.h +++ b/config/examples/VORONDesign/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Velleman/K8200 Upgraded/Configuration_adv.h b/config/examples/Velleman/K8200 Upgraded/Configuration_adv.h index ad2c1ee8c6..70d20d12f8 100644 --- a/config/examples/Velleman/K8200 Upgraded/Configuration_adv.h +++ b/config/examples/Velleman/K8200 Upgraded/Configuration_adv.h @@ -4261,13 +4261,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Velleman/K8200/Configuration_adv.h b/config/examples/Velleman/K8200/Configuration_adv.h index 5ded66b2e8..3aef30858e 100644 --- a/config/examples/Velleman/K8200/Configuration_adv.h +++ b/config/examples/Velleman/K8200/Configuration_adv.h @@ -4261,13 +4261,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h b/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h index 50a8679929..af862ee4cd 100644 --- a/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h +++ b/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Velleman/K8400/Single-head/Configuration_adv.h b/config/examples/Velleman/K8400/Single-head/Configuration_adv.h index 50a8679929..af862ee4cd 100644 --- a/config/examples/Velleman/K8400/Single-head/Configuration_adv.h +++ b/config/examples/Velleman/K8400/Single-head/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Voxelab/Aquila/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Voxelab/Aquila/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 295946c51c..f5c4010a95 100644 --- a/config/examples/Voxelab/Aquila/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Voxelab/Aquila/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/WASP/PowerWASP/Configuration_adv.h b/config/examples/WASP/PowerWASP/Configuration_adv.h index ac2d061b5f..9ab5bfdcb2 100644 --- a/config/examples/WASP/PowerWASP/Configuration_adv.h +++ b/config/examples/WASP/PowerWASP/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h b/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h index fe6df0c0d9..cee58c154e 100644 --- a/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h index de06e10557..39ce892a86 100644 --- a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h @@ -4250,13 +4250,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h index 7df94dfe2b..76c6a98ebb 100644 --- a/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h index 06dd1b0917..6b55054bf7 100644 --- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Weedo/Tina2/V2/Configuration_adv.h b/config/examples/Weedo/Tina2/V2/Configuration_adv.h index 02682ea5b1..66aa60ff30 100644 --- a/config/examples/Weedo/Tina2/V2/Configuration_adv.h +++ b/config/examples/Weedo/Tina2/V2/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Weedo/Tina2/V3/Configuration_adv.h b/config/examples/Weedo/Tina2/V3/Configuration_adv.h index 02682ea5b1..66aa60ff30 100644 --- a/config/examples/Weedo/Tina2/V3/Configuration_adv.h +++ b/config/examples/Weedo/Tina2/V3/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Weistek/wt150/Configuration_adv.h b/config/examples/Weistek/wt150/Configuration_adv.h index 10b57dc22e..357ee1ab78 100644 --- a/config/examples/Weistek/wt150/Configuration_adv.h +++ b/config/examples/Weistek/wt150/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Zonestar/P802M/Configuration_adv.h b/config/examples/Zonestar/P802M/Configuration_adv.h index 71cbcb2e64..c8f0dd6f28 100644 --- a/config/examples/Zonestar/P802M/Configuration_adv.h +++ b/config/examples/Zonestar/P802M/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h index b47baf5435..54d1ad736c 100644 --- a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h +++ b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h index 696cda3f21..cc51dfdade 100755 --- a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h +++ b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h index b802d9dcf4..480b46672b 100644 --- a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h @@ -4250,13 +4250,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h index 2af4a13bca..82e9e96ae2 100644 --- a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h @@ -4249,13 +4249,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/delta/Anycubic/Predator/Configuration_adv.h b/config/examples/delta/Anycubic/Predator/Configuration_adv.h index 0832d735a5..3f63684b08 100644 --- a/config/examples/delta/Anycubic/Predator/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Predator/Configuration_adv.h @@ -4251,13 +4251,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h index 36661deab1..49564bdd48 100644 --- a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h +++ b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h @@ -4249,13 +4249,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h index 36661deab1..49564bdd48 100644 --- a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h +++ b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h @@ -4249,13 +4249,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h index 062915f247..beee76e44e 100644 --- a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h +++ b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h @@ -4247,13 +4247,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h b/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h index 0af74a029b..1b8b3caba1 100644 --- a/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h +++ b/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h @@ -4249,13 +4249,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h b/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h index 86b0d60684..eb24f2aeed 100644 --- a/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h +++ b/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h index 95bc0ce04b..1030c867ef 100644 --- a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h +++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h @@ -4249,13 +4249,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/delta/FLSUN/kossel/Configuration_adv.h b/config/examples/delta/FLSUN/kossel/Configuration_adv.h index 95bc0ce04b..1030c867ef 100644 --- a/config/examples/delta/FLSUN/kossel/Configuration_adv.h +++ b/config/examples/delta/FLSUN/kossel/Configuration_adv.h @@ -4249,13 +4249,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h index 790a39a7f3..04b40fac02 100644 --- a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h +++ b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h @@ -4249,13 +4249,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/delta/Geeetech/G2/Configuration_adv.h b/config/examples/delta/Geeetech/G2/Configuration_adv.h index 91aabd9aaa..4ff250366a 100644 --- a/config/examples/delta/Geeetech/G2/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2/Configuration_adv.h @@ -4246,13 +4246,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h b/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h index 91aabd9aaa..4ff250366a 100644 --- a/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h @@ -4246,13 +4246,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/delta/Geeetech/G2S/Configuration_adv.h b/config/examples/delta/Geeetech/G2S/Configuration_adv.h index 91aabd9aaa..4ff250366a 100644 --- a/config/examples/delta/Geeetech/G2S/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2S/Configuration_adv.h @@ -4246,13 +4246,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h b/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h index 91aabd9aaa..4ff250366a 100644 --- a/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h @@ -4246,13 +4246,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h index c9574e6245..01f18cf482 100644 --- a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h +++ b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h @@ -4249,13 +4249,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h b/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h index 44cb5549c9..d57b48c45a 100644 --- a/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h +++ b/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h @@ -4249,13 +4249,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/delta/MKS/SBASE/Configuration_adv.h b/config/examples/delta/MKS/SBASE/Configuration_adv.h index 859726fa05..2431696aa8 100644 --- a/config/examples/delta/MKS/SBASE/Configuration_adv.h +++ b/config/examples/delta/MKS/SBASE/Configuration_adv.h @@ -4249,13 +4249,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/delta/Malyan M300/Configuration_adv.h b/config/examples/delta/Malyan M300/Configuration_adv.h index 20261e9f2a..bbfb0f9bee 100644 --- a/config/examples/delta/Malyan M300/Configuration_adv.h +++ b/config/examples/delta/Malyan M300/Configuration_adv.h @@ -4249,13 +4249,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/delta/Tevo Little Monster/Configuration_adv.h b/config/examples/delta/Tevo Little Monster/Configuration_adv.h index 6b530f60d5..0f543b61ac 100644 --- a/config/examples/delta/Tevo Little Monster/Configuration_adv.h +++ b/config/examples/delta/Tevo Little Monster/Configuration_adv.h @@ -4249,13 +4249,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/delta/Velleman/K8800/Configuration_adv.h b/config/examples/delta/Velleman/K8800/Configuration_adv.h index 9b6fd1b00c..958725b074 100644 --- a/config/examples/delta/Velleman/K8800/Configuration_adv.h +++ b/config/examples/delta/Velleman/K8800/Configuration_adv.h @@ -4253,13 +4253,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/delta/generic/Configuration_adv.h b/config/examples/delta/generic/Configuration_adv.h index 790a39a7f3..04b40fac02 100644 --- a/config/examples/delta/generic/Configuration_adv.h +++ b/config/examples/delta/generic/Configuration_adv.h @@ -4249,13 +4249,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/delta/kossel_clear/Configuration_adv.h b/config/examples/delta/kossel_clear/Configuration_adv.h index d6fd54d6a6..dcce744c41 100644 --- a/config/examples/delta/kossel_clear/Configuration_adv.h +++ b/config/examples/delta/kossel_clear/Configuration_adv.h @@ -4249,13 +4249,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/delta/kossel_xl/Configuration_adv.h b/config/examples/delta/kossel_xl/Configuration_adv.h index e6d049a603..3e87b951c6 100644 --- a/config/examples/delta/kossel_xl/Configuration_adv.h +++ b/config/examples/delta/kossel_xl/Configuration_adv.h @@ -4249,13 +4249,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/config/examples/gCreate/gMax1.5+/Configuration_adv.h index 5c85c2bd06..0f07f34b75 100644 --- a/config/examples/gCreate/gMax1.5+/Configuration_adv.h +++ b/config/examples/gCreate/gMax1.5+/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration_adv.h b/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration_adv.h index d988cc14e6..628db53fa3 100644 --- a/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration_adv.h +++ b/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration_adv.h b/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration_adv.h index c5fbcb79eb..2dfb755630 100644 --- a/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration_adv.h +++ b/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/makibox/Configuration_adv.h b/config/examples/makibox/Configuration_adv.h index 42001823a5..8c98e63ab5 100644 --- a/config/examples/makibox/Configuration_adv.h +++ b/config/examples/makibox/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host diff --git a/config/examples/tvrrug/Round2/Configuration_adv.h b/config/examples/tvrrug/Round2/Configuration_adv.h index 3941b66504..eb82ba83f2 100644 --- a/config/examples/tvrrug/Round2/Configuration_adv.h +++ b/config/examples/tvrrug/Round2/Configuration_adv.h @@ -4248,13 +4248,17 @@ #endif /** - * WiFi Support (Espressif ESP32 WiFi) +* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module */ -//#define WIFISUPPORT // Marlin embedded WiFi management +//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) -#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT) - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) +/** + * Extras for an ESP32-based motherboard with WIFISUPPORT + * These options don't apply to add-on WiFi modules based on ESP32 WiFi101. + */ +#if ENABLED(WIFISUPPORT) + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS //#define OTASUPPORT // Support over-the-air firmware updates //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host