3D-printing/Configurations
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Configurations.git synced 2025-07-07 23:17:38 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions

Clean up extra comment lines

Browse source
This commit is contained in:
Scott Lahteine 2020-09-28 17:11:10 -05:00
parent 68bef979da
commit 456fb77a1c
389 changed files with 2 additions and 1586 deletions
Download patch file Download diff file Expand all files Collapse all files

5
config/default/Configuration.h
View file

@ -34,7 +34,6 @@
* - Extra features * - Extra features
* *
* Advanced settings can be found in Configuration_adv.h * Advanced settings can be found in Configuration_adv.h
*
*/ */
#define CONFIGURATION_H_VERSION 020007 #define CONFIGURATION_H_VERSION 020007
@ -855,7 +854,6 @@
* - For simple switches connect... * - For simple switches connect...
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
*
*/ */
//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
@ -1567,7 +1565,6 @@
* *
* Caveats: The ending Z should be the same as starting Z. * Caveats: The ending Z should be the same as starting Z.
* Attention: EXPERIMENTAL. G-code arguments may change. * Attention: EXPERIMENTAL. G-code arguments may change.
*
*/ */
//#define NOZZLE_CLEAN_FEATURE //#define NOZZLE_CLEAN_FEATURE
@ -1720,7 +1717,6 @@
* *
* SD Card support is disabled by default. If your controller has an SD slot, * SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work. * you must uncomment the following option or it won't work.
*
*/ */
//#define SDSUPPORT //#define SDSUPPORT
@ -2349,7 +2345,6 @@
* *** CAUTION *** * *** CAUTION ***
* *
* LED Type. Enable only one of the following two options. * LED Type. Enable only one of the following two options.
*
*/ */
//#define RGB_LED //#define RGB_LED
//#define RGBW_LED //#define RGBW_LED

3
config/default/Configuration_adv.h
View file

@ -29,7 +29,6 @@
* Some of these settings can damage your printer if improperly set! * Some of these settings can damage your printer if improperly set!
* *
* Basic settings can be found in Configuration.h * Basic settings can be found in Configuration.h
*
*/ */
#define CONFIGURATION_ADV_H_VERSION 020007 #define CONFIGURATION_ADV_H_VERSION 020007
@ -738,7 +737,6 @@
* | 4 3 | 1 4 | 2 1 | 3 2 | * | 4 3 | 1 4 | 2 1 | 3 2 |
* | | | | | * | | | | |
* | 1 2 | 2 3 | 3 4 | 4 1 | * | 1 2 | 2 3 | 3 4 | 4 1 |
*
*/ */
#ifndef Z_STEPPER_ALIGN_XY #ifndef Z_STEPPER_ALIGN_XY
//#define Z_STEPPERS_ORIENTATION 0 //#define Z_STEPPERS_ORIENTATION 0
@ -1961,7 +1959,6 @@
* Be sure to turn off auto-retract during filament change. * Be sure to turn off auto-retract during filament change.
* *
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
*
*/ */
//#define FWRETRACT //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)

5
config/examples/3DFabXYZ/Migbot/Configuration.h
View file

@ -34,7 +34,6 @@
* - Extra features * - Extra features
* *
* Advanced settings can be found in Configuration_adv.h * Advanced settings can be found in Configuration_adv.h
*
*/ */
#define CONFIGURATION_H_VERSION 020007 #define CONFIGURATION_H_VERSION 020007
@ -859,7 +858,6 @@
* - For simple switches connect... * - For simple switches connect...
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
*
*/ */
//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
@ -1596,7 +1594,6 @@
* *
* Caveats: The ending Z should be the same as starting Z. * Caveats: The ending Z should be the same as starting Z.
* Attention: EXPERIMENTAL. G-code arguments may change. * Attention: EXPERIMENTAL. G-code arguments may change.
*
*/ */
//#define NOZZLE_CLEAN_FEATURE //#define NOZZLE_CLEAN_FEATURE
@ -1749,7 +1746,6 @@
* *
* SD Card support is disabled by default. If your controller has an SD slot, * SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work. * you must uncomment the following option or it won't work.
*
*/ */
#define SDSUPPORT #define SDSUPPORT
@ -2378,7 +2374,6 @@
* *** CAUTION *** * *** CAUTION ***
* *
* LED Type. Enable only one of the following two options. * LED Type. Enable only one of the following two options.
*
*/ */
//#define RGB_LED //#define RGB_LED
//#define RGBW_LED //#define RGBW_LED

3
config/examples/3DFabXYZ/Migbot/Configuration_adv.h
View file

@ -29,7 +29,6 @@
* Some of these settings can damage your printer if improperly set! * Some of these settings can damage your printer if improperly set!
* *
* Basic settings can be found in Configuration.h * Basic settings can be found in Configuration.h
*
*/ */
#define CONFIGURATION_ADV_H_VERSION 020007 #define CONFIGURATION_ADV_H_VERSION 020007
@ -738,7 +737,6 @@
* | 4 3 | 1 4 | 2 1 | 3 2 | * | 4 3 | 1 4 | 2 1 | 3 2 |
* | | | | | * | | | | |
* | 1 2 | 2 3 | 3 4 | 4 1 | * | 1 2 | 2 3 | 3 4 | 4 1 |
*
*/ */
#ifndef Z_STEPPER_ALIGN_XY #ifndef Z_STEPPER_ALIGN_XY
//#define Z_STEPPERS_ORIENTATION 0 //#define Z_STEPPERS_ORIENTATION 0
@ -1961,7 +1959,6 @@
* Be sure to turn off auto-retract during filament change. * Be sure to turn off auto-retract during filament change.
* *
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
*
*/ */
//#define FWRETRACT //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)

5
config/examples/ADIMLab/Gantry v1/Configuration.h
View file

@ -34,7 +34,6 @@
* - Extra features * - Extra features
* *
* Advanced settings can be found in Configuration_adv.h * Advanced settings can be found in Configuration_adv.h
*
*/ */
#define CONFIGURATION_H_VERSION 020007 #define CONFIGURATION_H_VERSION 020007
@ -856,7 +855,6 @@
* - For simple switches connect... * - For simple switches connect...
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
*
*/ */
//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
@ -1569,7 +1567,6 @@
* *
* Caveats: The ending Z should be the same as starting Z. * Caveats: The ending Z should be the same as starting Z.
* Attention: EXPERIMENTAL. G-code arguments may change. * Attention: EXPERIMENTAL. G-code arguments may change.
*
*/ */
//#define NOZZLE_CLEAN_FEATURE //#define NOZZLE_CLEAN_FEATURE
@ -1722,7 +1719,6 @@
* *
* SD Card support is disabled by default. If your controller has an SD slot, * SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work. * you must uncomment the following option or it won't work.
*
*/ */
#define SDSUPPORT #define SDSUPPORT
@ -2351,7 +2347,6 @@
* *** CAUTION *** * *** CAUTION ***
* *
* LED Type. Enable only one of the following two options. * LED Type. Enable only one of the following two options.
*
*/ */
//#define RGB_LED //#define RGB_LED
//#define RGBW_LED //#define RGBW_LED

3
config/examples/ADIMLab/Gantry v1/Configuration_adv.h
View file

@ -29,7 +29,6 @@
* Some of these settings can damage your printer if improperly set! * Some of these settings can damage your printer if improperly set!
* *
* Basic settings can be found in Configuration.h * Basic settings can be found in Configuration.h
*
*/ */
#define CONFIGURATION_ADV_H_VERSION 020007 #define CONFIGURATION_ADV_H_VERSION 020007
@ -738,7 +737,6 @@
* | 4 3 | 1 4 | 2 1 | 3 2 | * | 4 3 | 1 4 | 2 1 | 3 2 |
* | | | | | * | | | | |
* | 1 2 | 2 3 | 3 4 | 4 1 | * | 1 2 | 2 3 | 3 4 | 4 1 |
*
*/ */
#ifndef Z_STEPPER_ALIGN_XY #ifndef Z_STEPPER_ALIGN_XY
//#define Z_STEPPERS_ORIENTATION 0 //#define Z_STEPPERS_ORIENTATION 0
@ -1961,7 +1959,6 @@
* Be sure to turn off auto-retract during filament change. * Be sure to turn off auto-retract during filament change.
* *
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
*
*/ */
//#define FWRETRACT //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)

5
config/examples/ADIMLab/Gantry v2/Configuration.h
View file

@ -34,7 +34,6 @@
* - Extra features * - Extra features
* *
* Advanced settings can be found in Configuration_adv.h * Advanced settings can be found in Configuration_adv.h
*
*/ */
#define CONFIGURATION_H_VERSION 020007 #define CONFIGURATION_H_VERSION 020007
@ -856,7 +855,6 @@
* - For simple switches connect... * - For simple switches connect...
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
*
*/ */
//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
@ -1569,7 +1567,6 @@
* *
* Caveats: The ending Z should be the same as starting Z. * Caveats: The ending Z should be the same as starting Z.
* Attention: EXPERIMENTAL. G-code arguments may change. * Attention: EXPERIMENTAL. G-code arguments may change.
*
*/ */
//#define NOZZLE_CLEAN_FEATURE //#define NOZZLE_CLEAN_FEATURE
@ -1722,7 +1719,6 @@
* *
* SD Card support is disabled by default. If your controller has an SD slot, * SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work. * you must uncomment the following option or it won't work.
*
*/ */
#define SDSUPPORT #define SDSUPPORT
@ -2351,7 +2347,6 @@
* *** CAUTION *** * *** CAUTION ***
* *
* LED Type. Enable only one of the following two options. * LED Type. Enable only one of the following two options.
*
*/ */
//#define RGB_LED //#define RGB_LED
//#define RGBW_LED //#define RGBW_LED

3
config/examples/ADIMLab/Gantry v2/Configuration_adv.h
View file

@ -29,7 +29,6 @@
* Some of these settings can damage your printer if improperly set! * Some of these settings can damage your printer if improperly set!
* *
* Basic settings can be found in Configuration.h * Basic settings can be found in Configuration.h
*
*/ */
#define CONFIGURATION_ADV_H_VERSION 020007 #define CONFIGURATION_ADV_H_VERSION 020007
@ -738,7 +737,6 @@
* | 4 3 | 1 4 | 2 1 | 3 2 | * | 4 3 | 1 4 | 2 1 | 3 2 |
* | | | | | * | | | | |
* | 1 2 | 2 3 | 3 4 | 4 1 | * | 1 2 | 2 3 | 3 4 | 4 1 |
*
*/ */
#ifndef Z_STEPPER_ALIGN_XY #ifndef Z_STEPPER_ALIGN_XY
//#define Z_STEPPERS_ORIENTATION 0 //#define Z_STEPPERS_ORIENTATION 0
@ -1961,7 +1959,6 @@
* Be sure to turn off auto-retract during filament change. * Be sure to turn off auto-retract during filament change.
* *
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
*
*/ */
//#define FWRETRACT //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)

5
config/examples/AlephObjects/TAZ4/Configuration.h
View file

@ -34,7 +34,6 @@
* - Extra features * - Extra features
* *
* Advanced settings can be found in Configuration_adv.h * Advanced settings can be found in Configuration_adv.h
*
*/ */
#define CONFIGURATION_H_VERSION 020007 #define CONFIGURATION_H_VERSION 020007
@ -867,7 +866,6 @@
* - For simple switches connect... * - For simple switches connect...
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
*
*/ */
//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
@ -1579,7 +1577,6 @@
* *
* Caveats: The ending Z should be the same as starting Z. * Caveats: The ending Z should be the same as starting Z.
* Attention: EXPERIMENTAL. G-code arguments may change. * Attention: EXPERIMENTAL. G-code arguments may change.
*
*/ */
//#define NOZZLE_CLEAN_FEATURE //#define NOZZLE_CLEAN_FEATURE
@ -1732,7 +1729,6 @@
* *
* SD Card support is disabled by default. If your controller has an SD slot, * SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work. * you must uncomment the following option or it won't work.
*
*/ */
//#define SDSUPPORT //#define SDSUPPORT
@ -2361,7 +2357,6 @@
* *** CAUTION *** * *** CAUTION ***
* *
* LED Type. Enable only one of the following two options. * LED Type. Enable only one of the following two options.
*
*/ */
//#define RGB_LED //#define RGB_LED
//#define RGBW_LED //#define RGBW_LED

3
config/examples/AlephObjects/TAZ4/Configuration_adv.h
View file

@ -29,7 +29,6 @@
* Some of these settings can damage your printer if improperly set! * Some of these settings can damage your printer if improperly set!
* *
* Basic settings can be found in Configuration.h * Basic settings can be found in Configuration.h
*
*/ */
#define CONFIGURATION_ADV_H_VERSION 020007 #define CONFIGURATION_ADV_H_VERSION 020007
@ -738,7 +737,6 @@
* | 4 3 | 1 4 | 2 1 | 3 2 | * | 4 3 | 1 4 | 2 1 | 3 2 |
* | | | | | * | | | | |
* | 1 2 | 2 3 | 3 4 | 4 1 | * | 1 2 | 2 3 | 3 4 | 4 1 |
*
*/ */
#ifndef Z_STEPPER_ALIGN_XY #ifndef Z_STEPPER_ALIGN_XY
//#define Z_STEPPERS_ORIENTATION 0 //#define Z_STEPPERS_ORIENTATION 0
@ -1961,7 +1959,6 @@
* Be sure to turn off auto-retract during filament change. * Be sure to turn off auto-retract during filament change.
* *
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
*
*/ */
//#define FWRETRACT //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)

5
config/examples/Alfawise/U20-bltouch/Configuration.h
View file

@ -34,7 +34,6 @@
* - Extra features * - Extra features
* *
* Advanced settings can be found in Configuration_adv.h * Advanced settings can be found in Configuration_adv.h
*
*/ */
#define CONFIGURATION_H_VERSION 020007 #define CONFIGURATION_H_VERSION 020007
@ -912,7 +911,6 @@
* - For simple switches connect... * - For simple switches connect...
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
*
*/ */
//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
@ -1639,7 +1637,6 @@
* *
* Caveats: The ending Z should be the same as starting Z. * Caveats: The ending Z should be the same as starting Z.
* Attention: EXPERIMENTAL. G-code arguments may change. * Attention: EXPERIMENTAL. G-code arguments may change.
*
*/ */
//#define NOZZLE_CLEAN_FEATURE //#define NOZZLE_CLEAN_FEATURE
@ -1792,7 +1789,6 @@
* *
* SD Card support is disabled by default. If your controller has an SD slot, * SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work. * you must uncomment the following option or it won't work.
*
*/ */
#define SDSUPPORT #define SDSUPPORT
@ -2440,7 +2436,6 @@
* *** CAUTION *** * *** CAUTION ***
* *
* LED Type. Enable only one of the following two options. * LED Type. Enable only one of the following two options.
*
*/ */
//#define RGB_LED //#define RGB_LED
//#define RGBW_LED //#define RGBW_LED

3
config/examples/Alfawise/U20-bltouch/Configuration_adv.h
View file

@ -29,7 +29,6 @@
* Some of these settings can damage your printer if improperly set! * Some of these settings can damage your printer if improperly set!
* *
* Basic settings can be found in Configuration.h * Basic settings can be found in Configuration.h
*
*/ */
#define CONFIGURATION_ADV_H_VERSION 020007 #define CONFIGURATION_ADV_H_VERSION 020007
@ -739,7 +738,6 @@
* | 4 3 | 1 4 | 2 1 | 3 2 | * | 4 3 | 1 4 | 2 1 | 3 2 |
* | | | | | * | | | | |
* | 1 2 | 2 3 | 3 4 | 4 1 | * | 1 2 | 2 3 | 3 4 | 4 1 |
*
*/ */
#ifndef Z_STEPPER_ALIGN_XY #ifndef Z_STEPPER_ALIGN_XY
//#define Z_STEPPERS_ORIENTATION 0 //#define Z_STEPPERS_ORIENTATION 0
@ -1963,7 +1961,6 @@
* Be sure to turn off auto-retract during filament change. * Be sure to turn off auto-retract during filament change.
* *
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
*
*/ */
//#define FWRETRACT //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)

5
config/examples/Alfawise/U20/Configuration.h
View file

@ -34,7 +34,6 @@
* - Extra features * - Extra features
* *
* Advanced settings can be found in Configuration_adv.h * Advanced settings can be found in Configuration_adv.h
*
*/ */
#define CONFIGURATION_H_VERSION 020007 #define CONFIGURATION_H_VERSION 020007
@ -913,7 +912,6 @@
* - For simple switches connect... * - For simple switches connect...
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
*
*/ */
//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
@ -1640,7 +1638,6 @@
* *
* Caveats: The ending Z should be the same as starting Z. * Caveats: The ending Z should be the same as starting Z.
* Attention: EXPERIMENTAL. G-code arguments may change. * Attention: EXPERIMENTAL. G-code arguments may change.
*
*/ */
//#define NOZZLE_CLEAN_FEATURE //#define NOZZLE_CLEAN_FEATURE
@ -1793,7 +1790,6 @@
* *
* SD Card support is disabled by default. If your controller has an SD slot, * SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work. * you must uncomment the following option or it won't work.
*
*/ */
#define SDSUPPORT #define SDSUPPORT
@ -2441,7 +2437,6 @@
* *** CAUTION *** * *** CAUTION ***
* *
* LED Type. Enable only one of the following two options. * LED Type. Enable only one of the following two options.
*
*/ */
//#define RGB_LED //#define RGB_LED
//#define RGBW_LED //#define RGBW_LED

3
config/examples/Alfawise/U20/Configuration_adv.h
View file

@ -29,7 +29,6 @@
* Some of these settings can damage your printer if improperly set! * Some of these settings can damage your printer if improperly set!
* *
* Basic settings can be found in Configuration.h * Basic settings can be found in Configuration.h
*
*/ */
#define CONFIGURATION_ADV_H_VERSION 020007 #define CONFIGURATION_ADV_H_VERSION 020007
@ -738,7 +737,6 @@
* | 4 3 | 1 4 | 2 1 | 3 2 | * | 4 3 | 1 4 | 2 1 | 3 2 |
* | | | | | * | | | | |
* | 1 2 | 2 3 | 3 4 | 4 1 | * | 1 2 | 2 3 | 3 4 | 4 1 |
*
*/ */
#ifndef Z_STEPPER_ALIGN_XY #ifndef Z_STEPPER_ALIGN_XY
//#define Z_STEPPERS_ORIENTATION 0 //#define Z_STEPPERS_ORIENTATION 0
@ -1962,7 +1960,6 @@
* Be sure to turn off auto-retract during filament change. * Be sure to turn off auto-retract during filament change.
* *
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
*
*/ */
//#define FWRETRACT //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)

5
config/examples/AliExpress/CL-260/Configuration.h
View file

@ -34,7 +34,6 @@
* - Extra features * - Extra features
* *
* Advanced settings can be found in Configuration_adv.h * Advanced settings can be found in Configuration_adv.h
*
*/ */
#define CONFIGURATION_H_VERSION 020007 #define CONFIGURATION_H_VERSION 020007
@ -856,7 +855,6 @@
* - For simple switches connect... * - For simple switches connect...
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
*
*/ */
//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
@ -1568,7 +1566,6 @@
* *
* Caveats: The ending Z should be the same as starting Z. * Caveats: The ending Z should be the same as starting Z.
* Attention: EXPERIMENTAL. G-code arguments may change. * Attention: EXPERIMENTAL. G-code arguments may change.
*
*/ */
//#define NOZZLE_CLEAN_FEATURE //#define NOZZLE_CLEAN_FEATURE
@ -1721,7 +1718,6 @@
* *
* SD Card support is disabled by default. If your controller has an SD slot, * SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work. * you must uncomment the following option or it won't work.
*
*/ */
#define SDSUPPORT #define SDSUPPORT
@ -2350,7 +2346,6 @@
* *** CAUTION *** * *** CAUTION ***
* *
* LED Type. Enable only one of the following two options. * LED Type. Enable only one of the following two options.
*
*/ */
//#define RGB_LED //#define RGB_LED
//#define RGBW_LED //#define RGBW_LED

5
config/examples/AliExpress/UM2pExt/Configuration.h
View file

@ -34,7 +34,6 @@
* - Extra features * - Extra features
* *
* Advanced settings can be found in Configuration_adv.h * Advanced settings can be found in Configuration_adv.h
*
*/ */
#define CONFIGURATION_H_VERSION 020007 #define CONFIGURATION_H_VERSION 020007
@ -857,7 +856,6 @@
* - For simple switches connect... * - For simple switches connect...
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
*
*/ */
//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
@ -1569,7 +1567,6 @@
* *
* Caveats: The ending Z should be the same as starting Z. * Caveats: The ending Z should be the same as starting Z.
* Attention: EXPERIMENTAL. G-code arguments may change. * Attention: EXPERIMENTAL. G-code arguments may change.
*
*/ */
#define NOZZLE_CLEAN_FEATURE #define NOZZLE_CLEAN_FEATURE
@ -1722,7 +1719,6 @@
* *
* SD Card support is disabled by default. If your controller has an SD slot, * SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work. * you must uncomment the following option or it won't work.
*
*/ */
#define SDSUPPORT #define SDSUPPORT
@ -2351,7 +2347,6 @@
* *** CAUTION *** * *** CAUTION ***
* *
* LED Type. Enable only one of the following two options. * LED Type. Enable only one of the following two options.
*
*/ */
//#define RGB_LED //#define RGB_LED
//#define RGBW_LED //#define RGBW_LED

3
config/examples/AliExpress/UM2pExt/Configuration_adv.h
View file

@ -29,7 +29,6 @@
* Some of these settings can damage your printer if improperly set! * Some of these settings can damage your printer if improperly set!
* *
* Basic settings can be found in Configuration.h * Basic settings can be found in Configuration.h
*
*/ */
#define CONFIGURATION_ADV_H_VERSION 020007 #define CONFIGURATION_ADV_H_VERSION 020007
@ -738,7 +737,6 @@
* | 4 3 | 1 4 | 2 1 | 3 2 | * | 4 3 | 1 4 | 2 1 | 3 2 |
* | | | | | * | | | | |
* | 1 2 | 2 3 | 3 4 | 4 1 | * | 1 2 | 2 3 | 3 4 | 4 1 |
*
*/ */
#ifndef Z_STEPPER_ALIGN_XY #ifndef Z_STEPPER_ALIGN_XY
//#define Z_STEPPERS_ORIENTATION 0 //#define Z_STEPPERS_ORIENTATION 0
@ -1961,7 +1959,6 @@
* Be sure to turn off auto-retract during filament change. * Be sure to turn off auto-retract during filament change.
* *
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
*
*/ */
#define FWRETRACT #define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)

5
config/examples/Anet/A2/Configuration.h
View file

@ -34,7 +34,6 @@
* - Extra features * - Extra features
* *
* Advanced settings can be found in Configuration_adv.h * Advanced settings can be found in Configuration_adv.h
*
*/ */
#define CONFIGURATION_H_VERSION 020007 #define CONFIGURATION_H_VERSION 020007
@ -856,7 +855,6 @@
* - For simple switches connect... * - For simple switches connect...
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
*
*/ */
//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
@ -1568,7 +1566,6 @@
* *
* Caveats: The ending Z should be the same as starting Z. * Caveats: The ending Z should be the same as starting Z.
* Attention: EXPERIMENTAL. G-code arguments may change. * Attention: EXPERIMENTAL. G-code arguments may change.
*
*/ */
//#define NOZZLE_CLEAN_FEATURE //#define NOZZLE_CLEAN_FEATURE
@ -1721,7 +1718,6 @@
* *
* SD Card support is disabled by default. If your controller has an SD slot, * SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work. * you must uncomment the following option or it won't work.
*
*/ */
//#define SDSUPPORT //#define SDSUPPORT
@ -2352,7 +2348,6 @@
* *** CAUTION *** * *** CAUTION ***
* *
* LED Type. Enable only one of the following two options. * LED Type. Enable only one of the following two options.
*
*/ */
//#define RGB_LED //#define RGB_LED
//#define RGBW_LED //#define RGBW_LED

3
config/examples/Anet/A2/Configuration_adv.h
View file

@ -29,7 +29,6 @@
* Some of these settings can damage your printer if improperly set! * Some of these settings can damage your printer if improperly set!
* *
* Basic settings can be found in Configuration.h * Basic settings can be found in Configuration.h
*
*/ */
#define CONFIGURATION_ADV_H_VERSION 020007 #define CONFIGURATION_ADV_H_VERSION 020007
@ -738,7 +737,6 @@
* | 4 3 | 1 4 | 2 1 | 3 2 | * | 4 3 | 1 4 | 2 1 | 3 2 |
* | | | | | * | | | | |
* | 1 2 | 2 3 | 3 4 | 4 1 | * | 1 2 | 2 3 | 3 4 | 4 1 |
*
*/ */
#ifndef Z_STEPPER_ALIGN_XY #ifndef Z_STEPPER_ALIGN_XY
//#define Z_STEPPERS_ORIENTATION 0 //#define Z_STEPPERS_ORIENTATION 0
@ -1961,7 +1959,6 @@
* Be sure to turn off auto-retract during filament change. * Be sure to turn off auto-retract during filament change.
* *
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
*
*/ */
//#define FWRETRACT //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)

5
config/examples/Anet/A2plus/Configuration.h
View file

@ -34,7 +34,6 @@
* - Extra features * - Extra features
* *
* Advanced settings can be found in Configuration_adv.h * Advanced settings can be found in Configuration_adv.h
*
*/ */
#define CONFIGURATION_H_VERSION 020007 #define CONFIGURATION_H_VERSION 020007
@ -856,7 +855,6 @@
* - For simple switches connect... * - For simple switches connect...
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
*
*/ */
//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
@ -1568,7 +1566,6 @@
* *
* Caveats: The ending Z should be the same as starting Z. * Caveats: The ending Z should be the same as starting Z.
* Attention: EXPERIMENTAL. G-code arguments may change. * Attention: EXPERIMENTAL. G-code arguments may change.
*
*/ */
//#define NOZZLE_CLEAN_FEATURE //#define NOZZLE_CLEAN_FEATURE
@ -1721,7 +1718,6 @@
* *
* SD Card support is disabled by default. If your controller has an SD slot, * SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work. * you must uncomment the following option or it won't work.
*
*/ */
//#define SDSUPPORT //#define SDSUPPORT
@ -2352,7 +2348,6 @@
* *** CAUTION *** * *** CAUTION ***
* *
* LED Type. Enable only one of the following two options. * LED Type. Enable only one of the following two options.
*
*/ */
//#define RGB_LED //#define RGB_LED
//#define RGBW_LED //#define RGBW_LED

3
config/examples/Anet/A2plus/Configuration_adv.h
View file

@ -29,7 +29,6 @@
* Some of these settings can damage your printer if improperly set! * Some of these settings can damage your printer if improperly set!
* *
* Basic settings can be found in Configuration.h * Basic settings can be found in Configuration.h
*
*/ */
#define CONFIGURATION_ADV_H_VERSION 020007 #define CONFIGURATION_ADV_H_VERSION 020007
@ -738,7 +737,6 @@
* | 4 3 | 1 4 | 2 1 | 3 2 | * | 4 3 | 1 4 | 2 1 | 3 2 |
* | | | | | * | | | | |
* | 1 2 | 2 3 | 3 4 | 4 1 | * | 1 2 | 2 3 | 3 4 | 4 1 |
*
*/ */
#ifndef Z_STEPPER_ALIGN_XY #ifndef Z_STEPPER_ALIGN_XY
//#define Z_STEPPERS_ORIENTATION 0 //#define Z_STEPPERS_ORIENTATION 0
@ -1961,7 +1959,6 @@
* Be sure to turn off auto-retract during filament change. * Be sure to turn off auto-retract during filament change.
* *
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
*
*/ */
//#define FWRETRACT //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)

5
config/examples/Anet/A6/Configuration.h
View file

@ -34,7 +34,6 @@
* - Extra features * - Extra features
* *
* Advanced settings can be found in Configuration_adv.h * Advanced settings can be found in Configuration_adv.h
*
*/ */
#define CONFIGURATION_H_VERSION 020007 #define CONFIGURATION_H_VERSION 020007
@ -877,7 +876,6 @@
* - For simple switches connect... * - For simple switches connect...
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
*
*/ */
//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
@ -1661,7 +1659,6 @@
* *
* Caveats: The ending Z should be the same as starting Z. * Caveats: The ending Z should be the same as starting Z.
* Attention: EXPERIMENTAL. G-code arguments may change. * Attention: EXPERIMENTAL. G-code arguments may change.
*
*/ */
//#define NOZZLE_CLEAN_FEATURE //#define NOZZLE_CLEAN_FEATURE
@ -1814,7 +1811,6 @@
* *
* SD Card support is disabled by default. If your controller has an SD slot, * SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work. * you must uncomment the following option or it won't work.
*
*/ */
#define SDSUPPORT #define SDSUPPORT
@ -2447,7 +2443,6 @@
* *** CAUTION *** * *** CAUTION ***
* *
* LED Type. Enable only one of the following two options. * LED Type. Enable only one of the following two options.
*
*/ */
//#define RGB_LED //#define RGB_LED
//#define RGBW_LED //#define RGBW_LED

3
config/examples/Anet/A6/Configuration_adv.h
View file

@ -29,7 +29,6 @@
* Some of these settings can damage your printer if improperly set! * Some of these settings can damage your printer if improperly set!
* *
* Basic settings can be found in Configuration.h * Basic settings can be found in Configuration.h
*
*/ */
#define CONFIGURATION_ADV_H_VERSION 020007 #define CONFIGURATION_ADV_H_VERSION 020007
@ -738,7 +737,6 @@
* | 4 3 | 1 4 | 2 1 | 3 2 | * | 4 3 | 1 4 | 2 1 | 3 2 |
* | | | | | * | | | | |
* | 1 2 | 2 3 | 3 4 | 4 1 | * | 1 2 | 2 3 | 3 4 | 4 1 |
*
*/ */
#ifndef Z_STEPPER_ALIGN_XY #ifndef Z_STEPPER_ALIGN_XY
//#define Z_STEPPERS_ORIENTATION 0 //#define Z_STEPPERS_ORIENTATION 0
@ -1961,7 +1959,6 @@
* Be sure to turn off auto-retract during filament change. * Be sure to turn off auto-retract during filament change.
* *
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
*
*/ */
//#define FWRETRACT //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)

5
config/examples/Anet/A8/Configuration.h
View file

@ -34,7 +34,6 @@
* - Extra features * - Extra features
* *
* Advanced settings can be found in Configuration_adv.h * Advanced settings can be found in Configuration_adv.h
*
*/ */
#define CONFIGURATION_H_VERSION 020007 #define CONFIGURATION_H_VERSION 020007
@ -859,7 +858,6 @@
* - For simple switches connect... * - For simple switches connect...
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
*
*/ */
//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
@ -1571,7 +1569,6 @@
* *
* Caveats: The ending Z should be the same as starting Z. * Caveats: The ending Z should be the same as starting Z.
* Attention: EXPERIMENTAL. G-code arguments may change. * Attention: EXPERIMENTAL. G-code arguments may change.
*
*/ */
//#define NOZZLE_CLEAN_FEATURE //#define NOZZLE_CLEAN_FEATURE
@ -1724,7 +1721,6 @@
* *
* SD Card support is disabled by default. If your controller has an SD slot, * SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work. * you must uncomment the following option or it won't work.
*
*/ */
#define SDSUPPORT #define SDSUPPORT
@ -2355,7 +2351,6 @@
* *** CAUTION *** * *** CAUTION ***
* *
* LED Type. Enable only one of the following two options. * LED Type. Enable only one of the following two options.
*
*/ */
//#define RGB_LED //#define RGB_LED
//#define RGBW_LED //#define RGBW_LED

3
config/examples/Anet/A8/Configuration_adv.h
View file

@ -29,7 +29,6 @@
* Some of these settings can damage your printer if improperly set! * Some of these settings can damage your printer if improperly set!
* *
* Basic settings can be found in Configuration.h * Basic settings can be found in Configuration.h
*
*/ */
#define CONFIGURATION_ADV_H_VERSION 020007 #define CONFIGURATION_ADV_H_VERSION 020007
@ -738,7 +737,6 @@
* | 4 3 | 1 4 | 2 1 | 3 2 | * | 4 3 | 1 4 | 2 1 | 3 2 |
* | | | | | * | | | | |
* | 1 2 | 2 3 | 3 4 | 4 1 | * | 1 2 | 2 3 | 3 4 | 4 1 |
*
*/ */
#ifndef Z_STEPPER_ALIGN_XY #ifndef Z_STEPPER_ALIGN_XY
//#define Z_STEPPERS_ORIENTATION 0 //#define Z_STEPPERS_ORIENTATION 0
@ -1961,7 +1959,6 @@
* Be sure to turn off auto-retract during filament change. * Be sure to turn off auto-retract during filament change.
* *
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
*
*/ */
//#define FWRETRACT //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)

5
config/examples/Anet/A8plus/Configuration.h
View file

@ -34,7 +34,6 @@
* - Extra features * - Extra features
* *
* Advanced settings can be found in Configuration_adv.h * Advanced settings can be found in Configuration_adv.h
*
*/ */
#define CONFIGURATION_H_VERSION 020007 #define CONFIGURATION_H_VERSION 020007
@ -858,7 +857,6 @@
* - For simple switches connect... * - For simple switches connect...
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
*
*/ */
//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
@ -1570,7 +1568,6 @@
* *
* Caveats: The ending Z should be the same as starting Z. * Caveats: The ending Z should be the same as starting Z.
* Attention: EXPERIMENTAL. G-code arguments may change. * Attention: EXPERIMENTAL. G-code arguments may change.
*
*/ */
//#define NOZZLE_CLEAN_FEATURE //#define NOZZLE_CLEAN_FEATURE
@ -1723,7 +1720,6 @@
* *
* SD Card support is disabled by default. If your controller has an SD slot, * SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work. * you must uncomment the following option or it won't work.
*
*/ */
#define SDSUPPORT #define SDSUPPORT
@ -2355,7 +2351,6 @@
* *** CAUTION *** * *** CAUTION ***
* *
* LED Type. Enable only one of the following two options. * LED Type. Enable only one of the following two options.
*
*/ */
//#define RGB_LED //#define RGB_LED
//#define RGBW_LED //#define RGBW_LED

3
config/examples/Anet/A8plus/Configuration_adv.h
View file

@ -29,7 +29,6 @@
* Some of these settings can damage your printer if improperly set! * Some of these settings can damage your printer if improperly set!
* *
* Basic settings can be found in Configuration.h * Basic settings can be found in Configuration.h
*
*/ */
#define CONFIGURATION_ADV_H_VERSION 020007 #define CONFIGURATION_ADV_H_VERSION 020007
@ -738,7 +737,6 @@
* | 4 3 | 1 4 | 2 1 | 3 2 | * | 4 3 | 1 4 | 2 1 | 3 2 |
* | | | | | * | | | | |
* | 1 2 | 2 3 | 3 4 | 4 1 | * | 1 2 | 2 3 | 3 4 | 4 1 |
*
*/ */
#ifndef Z_STEPPER_ALIGN_XY #ifndef Z_STEPPER_ALIGN_XY
//#define Z_STEPPERS_ORIENTATION 0 //#define Z_STEPPERS_ORIENTATION 0
@ -1961,7 +1959,6 @@
* Be sure to turn off auto-retract during filament change. * Be sure to turn off auto-retract during filament change.
* *
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
*
*/ */
//#define FWRETRACT //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)

5
config/examples/Anet/E10/Configuration.h
View file

@ -34,7 +34,6 @@
* - Extra features * - Extra features
* *
* Advanced settings can be found in Configuration_adv.h * Advanced settings can be found in Configuration_adv.h
*
*/ */
#define CONFIGURATION_H_VERSION 020007 #define CONFIGURATION_H_VERSION 020007
@ -856,7 +855,6 @@
* - For simple switches connect... * - For simple switches connect...
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
*
*/ */
//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
@ -1568,7 +1566,6 @@
* *
* Caveats: The ending Z should be the same as starting Z. * Caveats: The ending Z should be the same as starting Z.
* Attention: EXPERIMENTAL. G-code arguments may change. * Attention: EXPERIMENTAL. G-code arguments may change.
*
*/ */
//#define NOZZLE_CLEAN_FEATURE //#define NOZZLE_CLEAN_FEATURE
@ -1721,7 +1718,6 @@
* *
* SD Card support is disabled by default. If your controller has an SD slot, * SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work. * you must uncomment the following option or it won't work.
*
*/ */
#define SDSUPPORT #define SDSUPPORT
@ -2353,7 +2349,6 @@
* *** CAUTION *** * *** CAUTION ***
* *
* LED Type. Enable only one of the following two options. * LED Type. Enable only one of the following two options.
*
*/ */
//#define RGB_LED //#define RGB_LED
//#define RGBW_LED //#define RGBW_LED

3
config/examples/Anet/E10/Configuration_adv.h
View file

@ -29,7 +29,6 @@
* Some of these settings can damage your printer if improperly set! * Some of these settings can damage your printer if improperly set!
* *
* Basic settings can be found in Configuration.h * Basic settings can be found in Configuration.h
*
*/ */
#define CONFIGURATION_ADV_H_VERSION 020007 #define CONFIGURATION_ADV_H_VERSION 020007
@ -738,7 +737,6 @@
* | 4 3 | 1 4 | 2 1 | 3 2 | * | 4 3 | 1 4 | 2 1 | 3 2 |
* | | | | | * | | | | |
* | 1 2 | 2 3 | 3 4 | 4 1 | * | 1 2 | 2 3 | 3 4 | 4 1 |
*
*/ */
#ifndef Z_STEPPER_ALIGN_XY #ifndef Z_STEPPER_ALIGN_XY
//#define Z_STEPPERS_ORIENTATION 0 //#define Z_STEPPERS_ORIENTATION 0
@ -1961,7 +1959,6 @@
* Be sure to turn off auto-retract during filament change. * Be sure to turn off auto-retract during filament change.
* *
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
*
*/ */
//#define FWRETRACT //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)

5
config/examples/Anet/E16/Configuration.h
View file

@ -34,7 +34,6 @@
* - Extra features * - Extra features
* *
* Advanced settings can be found in Configuration_adv.h * Advanced settings can be found in Configuration_adv.h
*
*/ */
#define CONFIGURATION_H_VERSION 020007 #define CONFIGURATION_H_VERSION 020007
@ -858,7 +857,6 @@
* - For simple switches connect... * - For simple switches connect...
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
*
*/ */
//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
@ -1570,7 +1568,6 @@
* *
* Caveats: The ending Z should be the same as starting Z. * Caveats: The ending Z should be the same as starting Z.
* Attention: EXPERIMENTAL. G-code arguments may change. * Attention: EXPERIMENTAL. G-code arguments may change.
*
*/ */
//#define NOZZLE_CLEAN_FEATURE //#define NOZZLE_CLEAN_FEATURE
@ -1723,7 +1720,6 @@
* *
* SD Card support is disabled by default. If your controller has an SD slot, * SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work. * you must uncomment the following option or it won't work.
*
*/ */
#define SDSUPPORT #define SDSUPPORT
@ -2352,7 +2348,6 @@
* *** CAUTION *** * *** CAUTION ***
* *
* LED Type. Enable only one of the following two options. * LED Type. Enable only one of the following two options.
*
*/ */
//#define RGB_LED //#define RGB_LED
//#define RGBW_LED //#define RGBW_LED

3
config/examples/Anet/E16/Configuration_adv.h
View file

@ -29,7 +29,6 @@
* Some of these settings can damage your printer if improperly set! * Some of these settings can damage your printer if improperly set!
* *
* Basic settings can be found in Configuration.h * Basic settings can be found in Configuration.h
*
*/ */
#define CONFIGURATION_ADV_H_VERSION 020007 #define CONFIGURATION_ADV_H_VERSION 020007
@ -738,7 +737,6 @@
* | 4 3 | 1 4 | 2 1 | 3 2 | * | 4 3 | 1 4 | 2 1 | 3 2 |
* | | | | | * | | | | |
* | 1 2 | 2 3 | 3 4 | 4 1 | * | 1 2 | 2 3 | 3 4 | 4 1 |
*
*/ */
#ifndef Z_STEPPER_ALIGN_XY #ifndef Z_STEPPER_ALIGN_XY
//#define Z_STEPPERS_ORIENTATION 0 //#define Z_STEPPERS_ORIENTATION 0
@ -1961,7 +1959,6 @@
* Be sure to turn off auto-retract during filament change. * Be sure to turn off auto-retract during filament change.
* *
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
*
*/ */
//#define FWRETRACT //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)

5
config/examples/Anet/ET4/Configuration.h
View file

@ -34,7 +34,6 @@
* - Extra features * - Extra features
* *
* Advanced settings can be found in Configuration_adv.h * Advanced settings can be found in Configuration_adv.h
*
*/ */
#define CONFIGURATION_H_VERSION 020007 #define CONFIGURATION_H_VERSION 020007
@ -862,7 +861,6 @@
* - For simple switches connect... * - For simple switches connect...
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
*
*/ */
//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
@ -1574,7 +1572,6 @@
* *
* Caveats: The ending Z should be the same as starting Z. * Caveats: The ending Z should be the same as starting Z.
* Attention: EXPERIMENTAL. G-code arguments may change. * Attention: EXPERIMENTAL. G-code arguments may change.
*
*/ */
//#define NOZZLE_CLEAN_FEATURE //#define NOZZLE_CLEAN_FEATURE
@ -1727,7 +1724,6 @@
* *
* SD Card support is disabled by default. If your controller has an SD slot, * SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work. * you must uncomment the following option or it won't work.
*
*/ */
#define SDSUPPORT #define SDSUPPORT
@ -2357,7 +2353,6 @@
* *** CAUTION *** * *** CAUTION ***
* *
* LED Type. Enable only one of the following two options. * LED Type. Enable only one of the following two options.
*
*/ */
//#define RGB_LED //#define RGB_LED
//#define RGBW_LED //#define RGBW_LED

3
config/examples/Anet/ET4/Configuration_adv.h
View file

@ -29,7 +29,6 @@
* Some of these settings can damage your printer if improperly set! * Some of these settings can damage your printer if improperly set!
* *
* Basic settings can be found in Configuration.h * Basic settings can be found in Configuration.h
*
*/ */
#define CONFIGURATION_ADV_H_VERSION 020007 #define CONFIGURATION_ADV_H_VERSION 020007
@ -738,7 +737,6 @@
* | 4 3 | 1 4 | 2 1 | 3 2 | * | 4 3 | 1 4 | 2 1 | 3 2 |
* | | | | | * | | | | |
* | 1 2 | 2 3 | 3 4 | 4 1 | * | 1 2 | 2 3 | 3 4 | 4 1 |
*
*/ */
#ifndef Z_STEPPER_ALIGN_XY #ifndef Z_STEPPER_ALIGN_XY
//#define Z_STEPPERS_ORIENTATION 0 //#define Z_STEPPERS_ORIENTATION 0
@ -1961,7 +1959,6 @@
* Be sure to turn off auto-retract during filament change. * Be sure to turn off auto-retract during filament change.
* *
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
*
*/ */
//#define FWRETRACT //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)

5
config/examples/AnyCubic/Chiron/Configuration.h
View file

@ -34,7 +34,6 @@
* - Extra features * - Extra features
* *
* Advanced settings can be found in Configuration_adv.h * Advanced settings can be found in Configuration_adv.h
*
*/ */
#define CONFIGURATION_H_VERSION 020007 #define CONFIGURATION_H_VERSION 020007
@ -860,7 +859,6 @@
* - For simple switches connect... * - For simple switches connect...
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
*
*/ */
//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
@ -1572,7 +1570,6 @@
* *
* Caveats: The ending Z should be the same as starting Z. * Caveats: The ending Z should be the same as starting Z.
* Attention: EXPERIMENTAL. G-code arguments may change. * Attention: EXPERIMENTAL. G-code arguments may change.
*
*/ */
//#define NOZZLE_CLEAN_FEATURE //#define NOZZLE_CLEAN_FEATURE
@ -1725,7 +1722,6 @@
* *
* SD Card support is disabled by default. If your controller has an SD slot, * SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work. * you must uncomment the following option or it won't work.
*
*/ */
#define SDSUPPORT #define SDSUPPORT
@ -2354,7 +2350,6 @@
* *** CAUTION *** * *** CAUTION ***
* *
* LED Type. Enable only one of the following two options. * LED Type. Enable only one of the following two options.
*
*/ */
//#define RGB_LED //#define RGB_LED
//#define RGBW_LED //#define RGBW_LED

3
config/examples/AnyCubic/Chiron/Configuration_adv.h
View file

@ -29,7 +29,6 @@
* Some of these settings can damage your printer if improperly set! * Some of these settings can damage your printer if improperly set!
* *
* Basic settings can be found in Configuration.h * Basic settings can be found in Configuration.h
*
*/ */
#define CONFIGURATION_ADV_H_VERSION 020007 #define CONFIGURATION_ADV_H_VERSION 020007
@ -738,7 +737,6 @@
* | 4 3 | 1 4 | 2 1 | 3 2 | * | 4 3 | 1 4 | 2 1 | 3 2 |
* | | | | | * | | | | |
* | 1 2 | 2 3 | 3 4 | 4 1 | * | 1 2 | 2 3 | 3 4 | 4 1 |
*
*/ */
#ifndef Z_STEPPER_ALIGN_XY #ifndef Z_STEPPER_ALIGN_XY
//#define Z_STEPPERS_ORIENTATION 0 //#define Z_STEPPERS_ORIENTATION 0
@ -1961,7 +1959,6 @@
* Be sure to turn off auto-retract during filament change. * Be sure to turn off auto-retract during filament change.
* *
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
*
*/ */
//#define FWRETRACT //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)

5
config/examples/AnyCubic/Mega Zero/Configuration.h
View file

@ -34,7 +34,6 @@
* - Extra features * - Extra features
* *
* Advanced settings can be found in Configuration_adv.h * Advanced settings can be found in Configuration_adv.h
*
*/ */
#define CONFIGURATION_H_VERSION 020007 #define CONFIGURATION_H_VERSION 020007
@ -858,7 +857,6 @@
* - For simple switches connect... * - For simple switches connect...
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
*
*/ */
//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
@ -1570,7 +1568,6 @@
* *
* Caveats: The ending Z should be the same as starting Z. * Caveats: The ending Z should be the same as starting Z.
* Attention: EXPERIMENTAL. G-code arguments may change. * Attention: EXPERIMENTAL. G-code arguments may change.
*
*/ */
//#define NOZZLE_CLEAN_FEATURE //#define NOZZLE_CLEAN_FEATURE
@ -1723,7 +1720,6 @@
* *
* SD Card support is disabled by default. If your controller has an SD slot, * SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work. * you must uncomment the following option or it won't work.
*
*/ */
#define SDSUPPORT #define SDSUPPORT
@ -2352,7 +2348,6 @@
* *** CAUTION *** * *** CAUTION ***
* *
* LED Type. Enable only one of the following two options. * LED Type. Enable only one of the following two options.
*
*/ */
//#define RGB_LED //#define RGB_LED
//#define RGBW_LED //#define RGBW_LED

3
config/examples/AnyCubic/Mega Zero/Configuration_adv.h
View file

@ -29,7 +29,6 @@
* Some of these settings can damage your printer if improperly set! * Some of these settings can damage your printer if improperly set!
* *
* Basic settings can be found in Configuration.h * Basic settings can be found in Configuration.h
*
*/ */
#define CONFIGURATION_ADV_H_VERSION 020007 #define CONFIGURATION_ADV_H_VERSION 020007
@ -738,7 +737,6 @@
* | 4 3 | 1 4 | 2 1 | 3 2 | * | 4 3 | 1 4 | 2 1 | 3 2 |
* | | | | | * | | | | |
* | 1 2 | 2 3 | 3 4 | 4 1 | * | 1 2 | 2 3 | 3 4 | 4 1 |
*
*/ */
#ifndef Z_STEPPER_ALIGN_XY #ifndef Z_STEPPER_ALIGN_XY
//#define Z_STEPPERS_ORIENTATION 0 //#define Z_STEPPERS_ORIENTATION 0
@ -1961,7 +1959,6 @@
* Be sure to turn off auto-retract during filament change. * Be sure to turn off auto-retract during filament change.
* *
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
*
*/ */
//#define FWRETRACT //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)

5
config/examples/AnyCubic/i3 Mega/Configuration.h
View file

@ -37,7 +37,6 @@
* - Extra features * - Extra features
* *
* Advanced settings can be found in Configuration_adv.h * Advanced settings can be found in Configuration_adv.h
*
*/ */
#define CONFIGURATION_H_VERSION 020007 #define CONFIGURATION_H_VERSION 020007
@ -866,7 +865,6 @@
* - For simple switches connect... * - For simple switches connect...
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
*
*/ */
//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
@ -1588,7 +1586,6 @@
* *
* Caveats: The ending Z should be the same as starting Z. * Caveats: The ending Z should be the same as starting Z.
* Attention: EXPERIMENTAL. G-code arguments may change. * Attention: EXPERIMENTAL. G-code arguments may change.
*
*/ */
//#define NOZZLE_CLEAN_FEATURE //#define NOZZLE_CLEAN_FEATURE
@ -1741,7 +1738,6 @@
* *
* SD Card support is disabled by default. If your controller has an SD slot, * SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work. * you must uncomment the following option or it won't work.
*
*/ */
#define SDSUPPORT #define SDSUPPORT
@ -2384,7 +2380,6 @@
* *** CAUTION *** * *** CAUTION ***
* *
* LED Type. Enable only one of the following two options. * LED Type. Enable only one of the following two options.
*
*/ */
//#define RGB_LED //#define RGB_LED
//#define RGBW_LED //#define RGBW_LED

3
config/examples/AnyCubic/i3 Mega/Configuration_adv.h
View file

@ -29,7 +29,6 @@
* Some of these settings can damage your printer if improperly set! * Some of these settings can damage your printer if improperly set!
* *
* Basic settings can be found in Configuration.h * Basic settings can be found in Configuration.h
*
*/ */
#define CONFIGURATION_ADV_H_VERSION 020007 #define CONFIGURATION_ADV_H_VERSION 020007
@ -738,7 +737,6 @@
* | 4 3 | 1 4 | 2 1 | 3 2 | * | 4 3 | 1 4 | 2 1 | 3 2 |
* | | | | | * | | | | |
* | 1 2 | 2 3 | 3 4 | 4 1 | * | 1 2 | 2 3 | 3 4 | 4 1 |
*
*/ */
#ifndef Z_STEPPER_ALIGN_XY #ifndef Z_STEPPER_ALIGN_XY
//#define Z_STEPPERS_ORIENTATION 0 //#define Z_STEPPERS_ORIENTATION 0
@ -1961,7 +1959,6 @@
* Be sure to turn off auto-retract during filament change. * Be sure to turn off auto-retract during filament change.
* *
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
*
*/ */
//#define FWRETRACT //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)

5
config/examples/AnyCubic/i3/Configuration.h
View file

@ -34,7 +34,6 @@
* - Extra features * - Extra features
* *
* Advanced settings can be found in Configuration_adv.h * Advanced settings can be found in Configuration_adv.h
*
*/ */
#define CONFIGURATION_H_VERSION 020007 #define CONFIGURATION_H_VERSION 020007
@ -856,7 +855,6 @@
* - For simple switches connect... * - For simple switches connect...
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
*
*/ */
//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
@ -1568,7 +1566,6 @@
* *
* Caveats: The ending Z should be the same as starting Z. * Caveats: The ending Z should be the same as starting Z.
* Attention: EXPERIMENTAL. G-code arguments may change. * Attention: EXPERIMENTAL. G-code arguments may change.
*
*/ */
//#define NOZZLE_CLEAN_FEATURE //#define NOZZLE_CLEAN_FEATURE
@ -1721,7 +1718,6 @@
* *
* SD Card support is disabled by default. If your controller has an SD slot, * SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work. * you must uncomment the following option or it won't work.
*
*/ */
#define SDSUPPORT #define SDSUPPORT
@ -2350,7 +2346,6 @@
* *** CAUTION *** * *** CAUTION ***
* *
* LED Type. Enable only one of the following two options. * LED Type. Enable only one of the following two options.
*
*/ */
//#define RGB_LED //#define RGB_LED
//#define RGBW_LED //#define RGBW_LED

3
config/examples/AnyCubic/i3/Configuration_adv.h
View file

@ -29,7 +29,6 @@
* Some of these settings can damage your printer if improperly set! * Some of these settings can damage your printer if improperly set!
* *
* Basic settings can be found in Configuration.h * Basic settings can be found in Configuration.h
*
*/ */
#define CONFIGURATION_ADV_H_VERSION 020007 #define CONFIGURATION_ADV_H_VERSION 020007
@ -738,7 +737,6 @@
* | 4 3 | 1 4 | 2 1 | 3 2 | * | 4 3 | 1 4 | 2 1 | 3 2 |
* | | | | | * | | | | |
* | 1 2 | 2 3 | 3 4 | 4 1 | * | 1 2 | 2 3 | 3 4 | 4 1 |
*
*/ */
#ifndef Z_STEPPER_ALIGN_XY #ifndef Z_STEPPER_ALIGN_XY
//#define Z_STEPPERS_ORIENTATION 0 //#define Z_STEPPERS_ORIENTATION 0
@ -1961,7 +1959,6 @@
* Be sure to turn off auto-retract during filament change. * Be sure to turn off auto-retract during filament change.
* *
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
*
*/ */
//#define FWRETRACT //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)

5
config/examples/ArmEd/Configuration.h
View file

@ -34,7 +34,6 @@
* - Extra features * - Extra features
* *
* Advanced settings can be found in Configuration_adv.h * Advanced settings can be found in Configuration_adv.h
*
*/ */
#define CONFIGURATION_H_VERSION 020007 #define CONFIGURATION_H_VERSION 020007
@ -857,7 +856,6 @@
* - For simple switches connect... * - For simple switches connect...
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
*
*/ */
//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
@ -1569,7 +1567,6 @@
* *
* Caveats: The ending Z should be the same as starting Z. * Caveats: The ending Z should be the same as starting Z.
* Attention: EXPERIMENTAL. G-code arguments may change. * Attention: EXPERIMENTAL. G-code arguments may change.
*
*/ */
//#define NOZZLE_CLEAN_FEATURE //#define NOZZLE_CLEAN_FEATURE
@ -1722,7 +1719,6 @@
* *
* SD Card support is disabled by default. If your controller has an SD slot, * SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work. * you must uncomment the following option or it won't work.
*
*/ */
//#define SDSUPPORT //#define SDSUPPORT
@ -2351,7 +2347,6 @@
* *** CAUTION *** * *** CAUTION ***
* *
* LED Type. Enable only one of the following two options. * LED Type. Enable only one of the following two options.
*
*/ */
//#define RGB_LED //#define RGB_LED
//#define RGBW_LED //#define RGBW_LED

3
config/examples/ArmEd/Configuration_adv.h
View file

@ -29,7 +29,6 @@
* Some of these settings can damage your printer if improperly set! * Some of these settings can damage your printer if improperly set!
* *
* Basic settings can be found in Configuration.h * Basic settings can be found in Configuration.h
*
*/ */
#define CONFIGURATION_ADV_H_VERSION 020007 #define CONFIGURATION_ADV_H_VERSION 020007
@ -742,7 +741,6 @@
* | 4 3 | 1 4 | 2 1 | 3 2 | * | 4 3 | 1 4 | 2 1 | 3 2 |
* | | | | | * | | | | |
* | 1 2 | 2 3 | 3 4 | 4 1 | * | 1 2 | 2 3 | 3 4 | 4 1 |
*
*/ */
#ifndef Z_STEPPER_ALIGN_XY #ifndef Z_STEPPER_ALIGN_XY
//#define Z_STEPPERS_ORIENTATION 0 //#define Z_STEPPERS_ORIENTATION 0
@ -1965,7 +1963,6 @@
* Be sure to turn off auto-retract during filament change. * Be sure to turn off auto-retract during filament change.
* *
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
*
*/ */
//#define FWRETRACT //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)

5
config/examples/Artillery/Genius/Configuration.h
View file

@ -34,7 +34,6 @@
* - Extra features * - Extra features
* *
* Advanced settings can be found in Configuration_adv.h * Advanced settings can be found in Configuration_adv.h
*
*/ */
#define CONFIGURATION_H_VERSION 020007 #define CONFIGURATION_H_VERSION 020007
@ -856,7 +855,6 @@
* - For simple switches connect... * - For simple switches connect...
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
*
*/ */
//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
@ -1568,7 +1566,6 @@
* *
* Caveats: The ending Z should be the same as starting Z. * Caveats: The ending Z should be the same as starting Z.
* Attention: EXPERIMENTAL. G-code arguments may change. * Attention: EXPERIMENTAL. G-code arguments may change.
*
*/ */
//#define NOZZLE_CLEAN_FEATURE //#define NOZZLE_CLEAN_FEATURE
@ -1721,7 +1718,6 @@
* *
* SD Card support is disabled by default. If your controller has an SD slot, * SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work. * you must uncomment the following option or it won't work.
*
*/ */
//#define SDSUPPORT //#define SDSUPPORT
@ -2350,7 +2346,6 @@
* *** CAUTION *** * *** CAUTION ***
* *
* LED Type. Enable only one of the following two options. * LED Type. Enable only one of the following two options.
*
*/ */
#define RGB_LED #define RGB_LED
//#define RGBW_LED //#define RGBW_LED

3
config/examples/Artillery/Genius/Configuration_adv.h
View file

@ -29,7 +29,6 @@
* Some of these settings can damage your printer if improperly set! * Some of these settings can damage your printer if improperly set!
* *
* Basic settings can be found in Configuration.h * Basic settings can be found in Configuration.h
*
*/ */
#define CONFIGURATION_ADV_H_VERSION 020007 #define CONFIGURATION_ADV_H_VERSION 020007
@ -738,7 +737,6 @@
* | 4 3 | 1 4 | 2 1 | 3 2 | * | 4 3 | 1 4 | 2 1 | 3 2 |
* | | | | | * | | | | |
* | 1 2 | 2 3 | 3 4 | 4 1 | * | 1 2 | 2 3 | 3 4 | 4 1 |
*
*/ */
#ifndef Z_STEPPER_ALIGN_XY #ifndef Z_STEPPER_ALIGN_XY
//#define Z_STEPPERS_ORIENTATION 0 //#define Z_STEPPERS_ORIENTATION 0
@ -1961,7 +1959,6 @@
* Be sure to turn off auto-retract during filament change. * Be sure to turn off auto-retract during filament change.
* *
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
*
*/ */
//#define FWRETRACT //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)

5
config/examples/Artillery/Sidewinder X1/Configuration.h
View file

@ -34,7 +34,6 @@
* - Extra features * - Extra features
* *
* Advanced settings can be found in Configuration_adv.h * Advanced settings can be found in Configuration_adv.h
*
*/ */
#define CONFIGURATION_H_VERSION 020007 #define CONFIGURATION_H_VERSION 020007
@ -856,7 +855,6 @@
* - For simple switches connect... * - For simple switches connect...
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
*
*/ */
//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
@ -1568,7 +1566,6 @@
* *
* Caveats: The ending Z should be the same as starting Z. * Caveats: The ending Z should be the same as starting Z.
* Attention: EXPERIMENTAL. G-code arguments may change. * Attention: EXPERIMENTAL. G-code arguments may change.
*
*/ */
//#define NOZZLE_CLEAN_FEATURE //#define NOZZLE_CLEAN_FEATURE
@ -1721,7 +1718,6 @@
* *
* SD Card support is disabled by default. If your controller has an SD slot, * SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work. * you must uncomment the following option or it won't work.
*
*/ */
//#define SDSUPPORT //#define SDSUPPORT
@ -2350,7 +2346,6 @@
* *** CAUTION *** * *** CAUTION ***
* *
* LED Type. Enable only one of the following two options. * LED Type. Enable only one of the following two options.
*
*/ */
#define RGB_LED #define RGB_LED
//#define RGBW_LED //#define RGBW_LED

3
config/examples/Artillery/Sidewinder X1/Configuration_adv.h
View file

@ -29,7 +29,6 @@
* Some of these settings can damage your printer if improperly set! * Some of these settings can damage your printer if improperly set!
* *
* Basic settings can be found in Configuration.h * Basic settings can be found in Configuration.h
*
*/ */
#define CONFIGURATION_ADV_H_VERSION 020007 #define CONFIGURATION_ADV_H_VERSION 020007
@ -738,7 +737,6 @@
* | 4 3 | 1 4 | 2 1 | 3 2 | * | 4 3 | 1 4 | 2 1 | 3 2 |
* | | | | | * | | | | |
* | 1 2 | 2 3 | 3 4 | 4 1 | * | 1 2 | 2 3 | 3 4 | 4 1 |
*
*/ */
#ifndef Z_STEPPER_ALIGN_XY #ifndef Z_STEPPER_ALIGN_XY
//#define Z_STEPPERS_ORIENTATION 0 //#define Z_STEPPERS_ORIENTATION 0
@ -1961,7 +1959,6 @@
* Be sure to turn off auto-retract during filament change. * Be sure to turn off auto-retract during filament change.
* *
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
*
*/ */
//#define FWRETRACT //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)

5
config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration.h
View file

@ -34,7 +34,6 @@
* - Extra features * - Extra features
* *
* Advanced settings can be found in Configuration_adv.h * Advanced settings can be found in Configuration_adv.h
*
*/ */
#define CONFIGURATION_H_VERSION 020007 #define CONFIGURATION_H_VERSION 020007
@ -872,7 +871,6 @@
* - For simple switches connect... * - For simple switches connect...
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
*
*/ */
//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
@ -1584,7 +1582,6 @@
* *
* Caveats: The ending Z should be the same as starting Z. * Caveats: The ending Z should be the same as starting Z.
* Attention: EXPERIMENTAL. G-code arguments may change. * Attention: EXPERIMENTAL. G-code arguments may change.
*
*/ */
//#define NOZZLE_CLEAN_FEATURE //#define NOZZLE_CLEAN_FEATURE
@ -1737,7 +1734,6 @@
* *
* SD Card support is disabled by default. If your controller has an SD slot, * SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work. * you must uncomment the following option or it won't work.
*
*/ */
//#define SDSUPPORT //#define SDSUPPORT
@ -2366,7 +2362,6 @@
* *** CAUTION *** * *** CAUTION ***
* *
* LED Type. Enable only one of the following two options. * LED Type. Enable only one of the following two options.
*
*/ */
#define RGB_LED #define RGB_LED
//#define RGBW_LED //#define RGBW_LED

3
config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration_adv.h
View file

@ -29,7 +29,6 @@
* Some of these settings can damage your printer if improperly set! * Some of these settings can damage your printer if improperly set!
* *
* Basic settings can be found in Configuration.h * Basic settings can be found in Configuration.h
*
*/ */
#define CONFIGURATION_ADV_H_VERSION 020007 #define CONFIGURATION_ADV_H_VERSION 020007
@ -738,7 +737,6 @@
* | 4 3 | 1 4 | 2 1 | 3 2 | * | 4 3 | 1 4 | 2 1 | 3 2 |
* | | | | | * | | | | |
* | 1 2 | 2 3 | 3 4 | 4 1 | * | 1 2 | 2 3 | 3 4 | 4 1 |
*
*/ */
#ifndef Z_STEPPER_ALIGN_XY #ifndef Z_STEPPER_ALIGN_XY
//#define Z_STEPPERS_ORIENTATION 0 //#define Z_STEPPERS_ORIENTATION 0
@ -1961,7 +1959,6 @@
* Be sure to turn off auto-retract during filament change. * Be sure to turn off auto-retract during filament change.
* *
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
*
*/ */
//#define FWRETRACT //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)

5
config/examples/Azteeg/X5GT/Configuration.h
View file

@ -34,7 +34,6 @@
* - Extra features * - Extra features
* *
* Advanced settings can be found in Configuration_adv.h * Advanced settings can be found in Configuration_adv.h
*
*/ */
#define CONFIGURATION_H_VERSION 020007 #define CONFIGURATION_H_VERSION 020007
@ -856,7 +855,6 @@
* - For simple switches connect... * - For simple switches connect...
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
*
*/ */
//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
@ -1568,7 +1566,6 @@
* *
* Caveats: The ending Z should be the same as starting Z. * Caveats: The ending Z should be the same as starting Z.
* Attention: EXPERIMENTAL. G-code arguments may change. * Attention: EXPERIMENTAL. G-code arguments may change.
*
*/ */
//#define NOZZLE_CLEAN_FEATURE //#define NOZZLE_CLEAN_FEATURE
@ -1721,7 +1718,6 @@
* *
* SD Card support is disabled by default. If your controller has an SD slot, * SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work. * you must uncomment the following option or it won't work.
*
*/ */
#define SDSUPPORT #define SDSUPPORT
@ -2350,7 +2346,6 @@
* *** CAUTION *** * *** CAUTION ***
* *
* LED Type. Enable only one of the following two options. * LED Type. Enable only one of the following two options.
*
*/ */
//#define RGB_LED //#define RGB_LED
//#define RGBW_LED //#define RGBW_LED

5
config/examples/BIBO/TouchX/cyclops/Configuration.h
View file

@ -34,7 +34,6 @@
* - Extra features * - Extra features
* *
* Advanced settings can be found in Configuration_adv.h * Advanced settings can be found in Configuration_adv.h
*
*/ */
#define CONFIGURATION_H_VERSION 020007 #define CONFIGURATION_H_VERSION 020007
@ -856,7 +855,6 @@
* - For simple switches connect... * - For simple switches connect...
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
*
*/ */
//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
@ -1568,7 +1566,6 @@
* *
* Caveats: The ending Z should be the same as starting Z. * Caveats: The ending Z should be the same as starting Z.
* Attention: EXPERIMENTAL. G-code arguments may change. * Attention: EXPERIMENTAL. G-code arguments may change.
*
*/ */
//#define NOZZLE_CLEAN_FEATURE //#define NOZZLE_CLEAN_FEATURE
@ -1721,7 +1718,6 @@
* *
* SD Card support is disabled by default. If your controller has an SD slot, * SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work. * you must uncomment the following option or it won't work.
*
*/ */
#define SDSUPPORT #define SDSUPPORT
@ -2350,7 +2346,6 @@
* *** CAUTION *** * *** CAUTION ***
* *
* LED Type. Enable only one of the following two options. * LED Type. Enable only one of the following two options.
*
*/ */
//#define RGB_LED //#define RGB_LED
//#define RGBW_LED //#define RGBW_LED

3
config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
View file

@ -29,7 +29,6 @@
* Some of these settings can damage your printer if improperly set! * Some of these settings can damage your printer if improperly set!
* *
* Basic settings can be found in Configuration.h * Basic settings can be found in Configuration.h
*
*/ */
#define CONFIGURATION_ADV_H_VERSION 020007 #define CONFIGURATION_ADV_H_VERSION 020007
@ -738,7 +737,6 @@
* | 4 3 | 1 4 | 2 1 | 3 2 | * | 4 3 | 1 4 | 2 1 | 3 2 |
* | | | | | * | | | | |
* | 1 2 | 2 3 | 3 4 | 4 1 | * | 1 2 | 2 3 | 3 4 | 4 1 |
*
*/ */
#ifndef Z_STEPPER_ALIGN_XY #ifndef Z_STEPPER_ALIGN_XY
//#define Z_STEPPERS_ORIENTATION 0 //#define Z_STEPPERS_ORIENTATION 0
@ -1961,7 +1959,6 @@
* Be sure to turn off auto-retract during filament change. * Be sure to turn off auto-retract during filament change.
* *
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
*
*/ */
//#define FWRETRACT //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)

5
config/examples/BIBO/TouchX/default/Configuration.h
View file

@ -34,7 +34,6 @@
* - Extra features * - Extra features
* *
* Advanced settings can be found in Configuration_adv.h * Advanced settings can be found in Configuration_adv.h
*
*/ */
#define CONFIGURATION_H_VERSION 020007 #define CONFIGURATION_H_VERSION 020007
@ -856,7 +855,6 @@
* - For simple switches connect... * - For simple switches connect...
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
*
*/ */
//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
@ -1568,7 +1566,6 @@
* *
* Caveats: The ending Z should be the same as starting Z. * Caveats: The ending Z should be the same as starting Z.
* Attention: EXPERIMENTAL. G-code arguments may change. * Attention: EXPERIMENTAL. G-code arguments may change.
*
*/ */
//#define NOZZLE_CLEAN_FEATURE //#define NOZZLE_CLEAN_FEATURE
@ -1721,7 +1718,6 @@
* *
* SD Card support is disabled by default. If your controller has an SD slot, * SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work. * you must uncomment the following option or it won't work.
*
*/ */
#define SDSUPPORT #define SDSUPPORT
@ -2350,7 +2346,6 @@
* *** CAUTION *** * *** CAUTION ***
* *
* LED Type. Enable only one of the following two options. * LED Type. Enable only one of the following two options.
*
*/ */
//#define RGB_LED //#define RGB_LED
//#define RGBW_LED //#define RGBW_LED

3
config/examples/BIBO/TouchX/default/Configuration_adv.h
View file

@ -29,7 +29,6 @@
* Some of these settings can damage your printer if improperly set! * Some of these settings can damage your printer if improperly set!
* *
* Basic settings can be found in Configuration.h * Basic settings can be found in Configuration.h
*
*/ */
#define CONFIGURATION_ADV_H_VERSION 020007 #define CONFIGURATION_ADV_H_VERSION 020007
@ -738,7 +737,6 @@
* | 4 3 | 1 4 | 2 1 | 3 2 | * | 4 3 | 1 4 | 2 1 | 3 2 |
* | | | | | * | | | | |
* | 1 2 | 2 3 | 3 4 | 4 1 | * | 1 2 | 2 3 | 3 4 | 4 1 |
*
*/ */
#ifndef Z_STEPPER_ALIGN_XY #ifndef Z_STEPPER_ALIGN_XY
//#define Z_STEPPERS_ORIENTATION 0 //#define Z_STEPPERS_ORIENTATION 0
@ -1961,7 +1959,6 @@
* Be sure to turn off auto-retract during filament change. * Be sure to turn off auto-retract during filament change.
* *
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
*
*/ */
//#define FWRETRACT //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)

5
config/examples/BIQU/B1-BLTouch/Configuration.h
View file

@ -34,7 +34,6 @@
* - Extra features * - Extra features
* *
* Advanced settings can be found in Configuration_adv.h * Advanced settings can be found in Configuration_adv.h
*
*/ */
#define CONFIGURATION_H_VERSION 020007 #define CONFIGURATION_H_VERSION 020007
@ -856,7 +855,6 @@
* - For simple switches connect... * - For simple switches connect...
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
*
*/ */
//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
@ -1573,7 +1571,6 @@
* *
* Caveats: The ending Z should be the same as starting Z. * Caveats: The ending Z should be the same as starting Z.
* Attention: EXPERIMENTAL. G-code arguments may change. * Attention: EXPERIMENTAL. G-code arguments may change.
*
*/ */
//#define NOZZLE_CLEAN_FEATURE //#define NOZZLE_CLEAN_FEATURE
@ -1726,7 +1723,6 @@
* *
* SD Card support is disabled by default. If your controller has an SD slot, * SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work. * you must uncomment the following option or it won't work.
*
*/ */
#define SDSUPPORT #define SDSUPPORT
@ -2355,7 +2351,6 @@
* *** CAUTION *** * *** CAUTION ***
* *
* LED Type. Enable only one of the following two options. * LED Type. Enable only one of the following two options.
*
*/ */
//#define RGB_LED //#define RGB_LED
//#define RGBW_LED //#define RGBW_LED

3
config/examples/BIQU/B1-BLTouch/Configuration_adv.h
View file

@ -29,7 +29,6 @@
* Some of these settings can damage your printer if improperly set! * Some of these settings can damage your printer if improperly set!
* *
* Basic settings can be found in Configuration.h * Basic settings can be found in Configuration.h
*
*/ */
#define CONFIGURATION_ADV_H_VERSION 020007 #define CONFIGURATION_ADV_H_VERSION 020007
@ -738,7 +737,6 @@
* | 4 3 | 1 4 | 2 1 | 3 2 | * | 4 3 | 1 4 | 2 1 | 3 2 |
* | | | | | * | | | | |
* | 1 2 | 2 3 | 3 4 | 4 1 | * | 1 2 | 2 3 | 3 4 | 4 1 |
*
*/ */
#ifndef Z_STEPPER_ALIGN_XY #ifndef Z_STEPPER_ALIGN_XY
//#define Z_STEPPERS_ORIENTATION 0 //#define Z_STEPPERS_ORIENTATION 0
@ -1961,7 +1959,6 @@
* Be sure to turn off auto-retract during filament change. * Be sure to turn off auto-retract during filament change.
* *
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
*
*/ */
//#define FWRETRACT //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)

5
config/examples/BIQU/B1/Configuration.h
View file

@ -34,7 +34,6 @@
* - Extra features * - Extra features
* *
* Advanced settings can be found in Configuration_adv.h * Advanced settings can be found in Configuration_adv.h
*
*/ */
#define CONFIGURATION_H_VERSION 020007 #define CONFIGURATION_H_VERSION 020007
@ -856,7 +855,6 @@
* - For simple switches connect... * - For simple switches connect...
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
*
*/ */
//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
@ -1573,7 +1571,6 @@
* *
* Caveats: The ending Z should be the same as starting Z. * Caveats: The ending Z should be the same as starting Z.
* Attention: EXPERIMENTAL. G-code arguments may change. * Attention: EXPERIMENTAL. G-code arguments may change.
*
*/ */
//#define NOZZLE_CLEAN_FEATURE //#define NOZZLE_CLEAN_FEATURE
@ -1726,7 +1723,6 @@
* *
* SD Card support is disabled by default. If your controller has an SD slot, * SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work. * you must uncomment the following option or it won't work.
*
*/ */
#define SDSUPPORT #define SDSUPPORT
@ -2355,7 +2351,6 @@
* *** CAUTION *** * *** CAUTION ***
* *
* LED Type. Enable only one of the following two options. * LED Type. Enable only one of the following two options.
*
*/ */
//#define RGB_LED //#define RGB_LED
//#define RGBW_LED //#define RGBW_LED

3
config/examples/BIQU/B1/Configuration_adv.h
View file

@ -29,7 +29,6 @@
* Some of these settings can damage your printer if improperly set! * Some of these settings can damage your printer if improperly set!
* *
* Basic settings can be found in Configuration.h * Basic settings can be found in Configuration.h
*
*/ */
#define CONFIGURATION_ADV_H_VERSION 020007 #define CONFIGURATION_ADV_H_VERSION 020007
@ -738,7 +737,6 @@
* | 4 3 | 1 4 | 2 1 | 3 2 | * | 4 3 | 1 4 | 2 1 | 3 2 |
* | | | | | * | | | | |
* | 1 2 | 2 3 | 3 4 | 4 1 | * | 1 2 | 2 3 | 3 4 | 4 1 |
*
*/ */
#ifndef Z_STEPPER_ALIGN_XY #ifndef Z_STEPPER_ALIGN_XY
//#define Z_STEPPERS_ORIENTATION 0 //#define Z_STEPPERS_ORIENTATION 0
@ -1961,7 +1959,6 @@
* Be sure to turn off auto-retract during filament change. * Be sure to turn off auto-retract during filament change.
* *
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
*
*/ */
//#define FWRETRACT //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)

5
config/examples/BQ/Hephestos/Configuration.h
View file

@ -34,7 +34,6 @@
* - Extra features * - Extra features
* *
* Advanced settings can be found in Configuration_adv.h * Advanced settings can be found in Configuration_adv.h
*
*/ */
#define CONFIGURATION_H_VERSION 020007 #define CONFIGURATION_H_VERSION 020007
@ -857,7 +856,6 @@
* - For simple switches connect... * - For simple switches connect...
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
*
*/ */
//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
@ -1569,7 +1567,6 @@
* *
* Caveats: The ending Z should be the same as starting Z. * Caveats: The ending Z should be the same as starting Z.
* Attention: EXPERIMENTAL. G-code arguments may change. * Attention: EXPERIMENTAL. G-code arguments may change.
*
*/ */
//#define NOZZLE_CLEAN_FEATURE //#define NOZZLE_CLEAN_FEATURE
@ -1722,7 +1719,6 @@
* *
* SD Card support is disabled by default. If your controller has an SD slot, * SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work. * you must uncomment the following option or it won't work.
*
*/ */
#define SDSUPPORT #define SDSUPPORT
@ -2351,7 +2347,6 @@
* *** CAUTION *** * *** CAUTION ***
* *
* LED Type. Enable only one of the following two options. * LED Type. Enable only one of the following two options.
*
*/ */
//#define RGB_LED //#define RGB_LED
//#define RGBW_LED //#define RGBW_LED

3
config/examples/BQ/Hephestos/Configuration_adv.h
View file

@ -29,7 +29,6 @@
* Some of these settings can damage your printer if improperly set! * Some of these settings can damage your printer if improperly set!
* *
* Basic settings can be found in Configuration.h * Basic settings can be found in Configuration.h
*
*/ */
#define CONFIGURATION_ADV_H_VERSION 020007 #define CONFIGURATION_ADV_H_VERSION 020007
@ -738,7 +737,6 @@
* | 4 3 | 1 4 | 2 1 | 3 2 | * | 4 3 | 1 4 | 2 1 | 3 2 |
* | | | | | * | | | | |
* | 1 2 | 2 3 | 3 4 | 4 1 | * | 1 2 | 2 3 | 3 4 | 4 1 |
*
*/ */
#ifndef Z_STEPPER_ALIGN_XY #ifndef Z_STEPPER_ALIGN_XY
//#define Z_STEPPERS_ORIENTATION 0 //#define Z_STEPPERS_ORIENTATION 0
@ -1961,7 +1959,6 @@
* Be sure to turn off auto-retract during filament change. * Be sure to turn off auto-retract during filament change.
* *
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
*
*/ */
//#define FWRETRACT //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)

5
config/examples/BQ/Hephestos_2/Configuration.h
View file

@ -34,7 +34,6 @@
* - Extra features * - Extra features
* *
* Advanced settings can be found in Configuration_adv.h * Advanced settings can be found in Configuration_adv.h
*
*/ */
#define CONFIGURATION_H_VERSION 020007 #define CONFIGURATION_H_VERSION 020007
@ -870,7 +869,6 @@
* - For simple switches connect... * - For simple switches connect...
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
*
*/ */
//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
@ -1582,7 +1580,6 @@
* *
* Caveats: The ending Z should be the same as starting Z. * Caveats: The ending Z should be the same as starting Z.
* Attention: EXPERIMENTAL. G-code arguments may change. * Attention: EXPERIMENTAL. G-code arguments may change.
*
*/ */
//#define NOZZLE_CLEAN_FEATURE //#define NOZZLE_CLEAN_FEATURE
@ -1735,7 +1732,6 @@
* *
* SD Card support is disabled by default. If your controller has an SD slot, * SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work. * you must uncomment the following option or it won't work.
*
*/ */
#define SDSUPPORT #define SDSUPPORT
@ -2364,7 +2360,6 @@
* *** CAUTION *** * *** CAUTION ***
* *
* LED Type. Enable only one of the following two options. * LED Type. Enable only one of the following two options.
*
*/ */
//#define RGB_LED //#define RGB_LED
//#define RGBW_LED //#define RGBW_LED

3
config/examples/BQ/Hephestos_2/Configuration_adv.h
View file

@ -29,7 +29,6 @@
* Some of these settings can damage your printer if improperly set! * Some of these settings can damage your printer if improperly set!
* *
* Basic settings can be found in Configuration.h * Basic settings can be found in Configuration.h
*
*/ */
#define CONFIGURATION_ADV_H_VERSION 020007 #define CONFIGURATION_ADV_H_VERSION 020007
@ -738,7 +737,6 @@
* | 4 3 | 1 4 | 2 1 | 3 2 | * | 4 3 | 1 4 | 2 1 | 3 2 |
* | | | | | * | | | | |
* | 1 2 | 2 3 | 3 4 | 4 1 | * | 1 2 | 2 3 | 3 4 | 4 1 |
*
*/ */
#ifndef Z_STEPPER_ALIGN_XY #ifndef Z_STEPPER_ALIGN_XY
//#define Z_STEPPERS_ORIENTATION 0 //#define Z_STEPPERS_ORIENTATION 0
@ -1969,7 +1967,6 @@
* Be sure to turn off auto-retract during filament change. * Be sure to turn off auto-retract during filament change.
* *
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
*
*/ */
//#define FWRETRACT //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)

5
config/examples/BQ/WITBOX/Configuration.h
View file

@ -34,7 +34,6 @@
* - Extra features * - Extra features
* *
* Advanced settings can be found in Configuration_adv.h * Advanced settings can be found in Configuration_adv.h
*
*/ */
#define CONFIGURATION_H_VERSION 020007 #define CONFIGURATION_H_VERSION 020007
@ -857,7 +856,6 @@
* - For simple switches connect... * - For simple switches connect...
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
*
*/ */
//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
@ -1569,7 +1567,6 @@
* *
* Caveats: The ending Z should be the same as starting Z. * Caveats: The ending Z should be the same as starting Z.
* Attention: EXPERIMENTAL. G-code arguments may change. * Attention: EXPERIMENTAL. G-code arguments may change.
*
*/ */
//#define NOZZLE_CLEAN_FEATURE //#define NOZZLE_CLEAN_FEATURE
@ -1722,7 +1719,6 @@
* *
* SD Card support is disabled by default. If your controller has an SD slot, * SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work. * you must uncomment the following option or it won't work.
*
*/ */
#define SDSUPPORT #define SDSUPPORT
@ -2351,7 +2347,6 @@
* *** CAUTION *** * *** CAUTION ***
* *
* LED Type. Enable only one of the following two options. * LED Type. Enable only one of the following two options.
*
*/ */
//#define RGB_LED //#define RGB_LED
//#define RGBW_LED //#define RGBW_LED

3
config/examples/BQ/WITBOX/Configuration_adv.h
View file

@ -29,7 +29,6 @@
* Some of these settings can damage your printer if improperly set! * Some of these settings can damage your printer if improperly set!
* *
* Basic settings can be found in Configuration.h * Basic settings can be found in Configuration.h
*
*/ */
#define CONFIGURATION_ADV_H_VERSION 020007 #define CONFIGURATION_ADV_H_VERSION 020007
@ -738,7 +737,6 @@
* | 4 3 | 1 4 | 2 1 | 3 2 | * | 4 3 | 1 4 | 2 1 | 3 2 |
* | | | | | * | | | | |
* | 1 2 | 2 3 | 3 4 | 4 1 | * | 1 2 | 2 3 | 3 4 | 4 1 |
*
*/ */
#ifndef Z_STEPPER_ALIGN_XY #ifndef Z_STEPPER_ALIGN_XY
//#define Z_STEPPERS_ORIENTATION 0 //#define Z_STEPPERS_ORIENTATION 0
@ -1961,7 +1959,6 @@
* Be sure to turn off auto-retract during filament change. * Be sure to turn off auto-retract during filament change.
* *
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
*
*/ */
//#define FWRETRACT //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)

5
config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h
View file

@ -34,7 +34,6 @@
* - Extra features * - Extra features
* *
* Advanced settings can be found in Configuration_adv.h * Advanced settings can be found in Configuration_adv.h
*
*/ */
#define CONFIGURATION_H_VERSION 020007 #define CONFIGURATION_H_VERSION 020007
@ -857,7 +856,6 @@
* - For simple switches connect... * - For simple switches connect...
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
*
*/ */
//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
@ -1569,7 +1567,6 @@
* *
* Caveats: The ending Z should be the same as starting Z. * Caveats: The ending Z should be the same as starting Z.
* Attention: EXPERIMENTAL. G-code arguments may change. * Attention: EXPERIMENTAL. G-code arguments may change.
*
*/ */
//#define NOZZLE_CLEAN_FEATURE //#define NOZZLE_CLEAN_FEATURE
@ -1722,7 +1719,6 @@
* *
* SD Card support is disabled by default. If your controller has an SD slot, * SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work. * you must uncomment the following option or it won't work.
*
*/ */
#define SDSUPPORT #define SDSUPPORT
@ -2351,7 +2347,6 @@
* *** CAUTION *** * *** CAUTION ***
* *
* LED Type. Enable only one of the following two options. * LED Type. Enable only one of the following two options.
*
*/ */
//#define RGB_LED //#define RGB_LED
//#define RGBW_LED //#define RGBW_LED

5
config/examples/Cartesio/Configuration.h
View file

@ -34,7 +34,6 @@
* - Extra features * - Extra features
* *
* Advanced settings can be found in Configuration_adv.h * Advanced settings can be found in Configuration_adv.h
*
*/ */
#define CONFIGURATION_H_VERSION 020007 #define CONFIGURATION_H_VERSION 020007
@ -872,7 +871,6 @@
* - For simple switches connect... * - For simple switches connect...
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
*
*/ */
//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
@ -1584,7 +1582,6 @@
* *
* Caveats: The ending Z should be the same as starting Z. * Caveats: The ending Z should be the same as starting Z.
* Attention: EXPERIMENTAL. G-code arguments may change. * Attention: EXPERIMENTAL. G-code arguments may change.
*
*/ */
//#define NOZZLE_CLEAN_FEATURE //#define NOZZLE_CLEAN_FEATURE
@ -1737,7 +1734,6 @@
* *
* SD Card support is disabled by default. If your controller has an SD slot, * SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work. * you must uncomment the following option or it won't work.
*
*/ */
#define SDSUPPORT #define SDSUPPORT
@ -2366,7 +2362,6 @@
* *** CAUTION *** * *** CAUTION ***
* *
* LED Type. Enable only one of the following two options. * LED Type. Enable only one of the following two options.
*
*/ */
//#define RGB_LED //#define RGB_LED
//#define RGBW_LED //#define RGBW_LED

3
config/examples/Cartesio/Configuration_adv.h
View file

@ -29,7 +29,6 @@
* Some of these settings can damage your printer if improperly set! * Some of these settings can damage your printer if improperly set!
* *
* Basic settings can be found in Configuration.h * Basic settings can be found in Configuration.h
*
*/ */
#define CONFIGURATION_ADV_H_VERSION 020007 #define CONFIGURATION_ADV_H_VERSION 020007
@ -738,7 +737,6 @@
* | 4 3 | 1 4 | 2 1 | 3 2 | * | 4 3 | 1 4 | 2 1 | 3 2 |
* | | | | | * | | | | |
* | 1 2 | 2 3 | 3 4 | 4 1 | * | 1 2 | 2 3 | 3 4 | 4 1 |
*
*/ */
#ifndef Z_STEPPER_ALIGN_XY #ifndef Z_STEPPER_ALIGN_XY
//#define Z_STEPPERS_ORIENTATION 0 //#define Z_STEPPERS_ORIENTATION 0
@ -1961,7 +1959,6 @@
* Be sure to turn off auto-retract during filament change. * Be sure to turn off auto-retract during filament change.
* *
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
*
*/ */
//#define FWRETRACT //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)

5
config/examples/Copymaster3D/300/Configuration.h
View file

@ -34,7 +34,6 @@
* - Extra features * - Extra features
* *
* Advanced settings can be found in Configuration_adv.h * Advanced settings can be found in Configuration_adv.h
*
*/ */
#define CONFIGURATION_H_VERSION 020007 #define CONFIGURATION_H_VERSION 020007
@ -857,7 +856,6 @@
* - For simple switches connect... * - For simple switches connect...
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
*
*/ */
//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
@ -1569,7 +1567,6 @@
* *
* Caveats: The ending Z should be the same as starting Z. * Caveats: The ending Z should be the same as starting Z.
* Attention: EXPERIMENTAL. G-code arguments may change. * Attention: EXPERIMENTAL. G-code arguments may change.
*
*/ */
//#define NOZZLE_CLEAN_FEATURE //#define NOZZLE_CLEAN_FEATURE
@ -1722,7 +1719,6 @@
* *
* SD Card support is disabled by default. If your controller has an SD slot, * SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work. * you must uncomment the following option or it won't work.
*
*/ */
#define SDSUPPORT #define SDSUPPORT
@ -2351,7 +2347,6 @@
* *** CAUTION *** * *** CAUTION ***
* *
* LED Type. Enable only one of the following two options. * LED Type. Enable only one of the following two options.
*
*/ */
//#define RGB_LED //#define RGB_LED
//#define RGBW_LED //#define RGBW_LED

5
config/examples/Copymaster3D/400/Configuration.h
View file

@ -34,7 +34,6 @@
* - Extra features * - Extra features
* *
* Advanced settings can be found in Configuration_adv.h * Advanced settings can be found in Configuration_adv.h
*
*/ */
#define CONFIGURATION_H_VERSION 020007 #define CONFIGURATION_H_VERSION 020007
@ -856,7 +855,6 @@
* - For simple switches connect... * - For simple switches connect...
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
*
*/ */
//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
@ -1568,7 +1566,6 @@
* *
* Caveats: The ending Z should be the same as starting Z. * Caveats: The ending Z should be the same as starting Z.
* Attention: EXPERIMENTAL. G-code arguments may change. * Attention: EXPERIMENTAL. G-code arguments may change.
*
*/ */
//#define NOZZLE_CLEAN_FEATURE //#define NOZZLE_CLEAN_FEATURE
@ -1721,7 +1718,6 @@
* *
* SD Card support is disabled by default. If your controller has an SD slot, * SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work. * you must uncomment the following option or it won't work.
*
*/ */
#define SDSUPPORT #define SDSUPPORT
@ -2350,7 +2346,6 @@
* *** CAUTION *** * *** CAUTION ***
* *
* LED Type. Enable only one of the following two options. * LED Type. Enable only one of the following two options.
*
*/ */
//#define RGB_LED //#define RGB_LED
//#define RGBW_LED //#define RGBW_LED

5
config/examples/Copymaster3D/500/Configuration.h
View file

@ -34,7 +34,6 @@
* - Extra features * - Extra features
* *
* Advanced settings can be found in Configuration_adv.h * Advanced settings can be found in Configuration_adv.h
*
*/ */
#define CONFIGURATION_H_VERSION 020007 #define CONFIGURATION_H_VERSION 020007
@ -857,7 +856,6 @@
* - For simple switches connect... * - For simple switches connect...
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
*
*/ */
//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
@ -1569,7 +1567,6 @@
* *
* Caveats: The ending Z should be the same as starting Z. * Caveats: The ending Z should be the same as starting Z.
* Attention: EXPERIMENTAL. G-code arguments may change. * Attention: EXPERIMENTAL. G-code arguments may change.
*
*/ */
//#define NOZZLE_CLEAN_FEATURE //#define NOZZLE_CLEAN_FEATURE
@ -1722,7 +1719,6 @@
* *
* SD Card support is disabled by default. If your controller has an SD slot, * SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work. * you must uncomment the following option or it won't work.
*
*/ */
#define SDSUPPORT #define SDSUPPORT
@ -2351,7 +2347,6 @@
* *** CAUTION *** * *** CAUTION ***
* *
* LED Type. Enable only one of the following two options. * LED Type. Enable only one of the following two options.
*
*/ */
//#define RGB_LED //#define RGB_LED
//#define RGBW_LED //#define RGBW_LED

5
config/examples/Creality/CR-10 V2/Configuration.h
View file

@ -41,7 +41,6 @@
* - Extra features * - Extra features
* *
* Advanced settings can be found in Configuration_adv.h * Advanced settings can be found in Configuration_adv.h
*
*/ */
#define CONFIGURATION_H_VERSION 020007 #define CONFIGURATION_H_VERSION 020007
@ -865,7 +864,6 @@
* - For simple switches connect... * - For simple switches connect...
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
*
*/ */
//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
@ -1595,7 +1593,6 @@
* *
* Caveats: The ending Z should be the same as starting Z. * Caveats: The ending Z should be the same as starting Z.
* Attention: EXPERIMENTAL. G-code arguments may change. * Attention: EXPERIMENTAL. G-code arguments may change.
*
*/ */
//#define NOZZLE_CLEAN_FEATURE //#define NOZZLE_CLEAN_FEATURE
@ -1748,7 +1745,6 @@
* *
* SD Card support is disabled by default. If your controller has an SD slot, * SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work. * you must uncomment the following option or it won't work.
*
*/ */
#define SDSUPPORT #define SDSUPPORT
@ -2377,7 +2373,6 @@
* *** CAUTION *** * *** CAUTION ***
* *
* LED Type. Enable only one of the following two options. * LED Type. Enable only one of the following two options.
*
*/ */
//#define RGB_LED //#define RGB_LED
//#define RGBW_LED //#define RGBW_LED

3
config/examples/Creality/CR-10 V2/Configuration_adv.h
View file

@ -29,7 +29,6 @@
* Some of these settings can damage your printer if improperly set! * Some of these settings can damage your printer if improperly set!
* *
* Basic settings can be found in Configuration.h * Basic settings can be found in Configuration.h
*
*/ */
#define CONFIGURATION_ADV_H_VERSION 020007 #define CONFIGURATION_ADV_H_VERSION 020007
@ -738,7 +737,6 @@
* | 4 3 | 1 4 | 2 1 | 3 2 | * | 4 3 | 1 4 | 2 1 | 3 2 |
* | | | | | * | | | | |
* | 1 2 | 2 3 | 3 4 | 4 1 | * | 1 2 | 2 3 | 3 4 | 4 1 |
*
*/ */
#ifndef Z_STEPPER_ALIGN_XY #ifndef Z_STEPPER_ALIGN_XY
//#define Z_STEPPERS_ORIENTATION 0 //#define Z_STEPPERS_ORIENTATION 0
@ -1964,7 +1962,6 @@
* Be sure to turn off auto-retract during filament change. * Be sure to turn off auto-retract during filament change.
* *
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
*
*/ */
//#define FWRETRACT //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)

5
config/examples/Creality/CR-10/Configuration.h
View file

@ -34,7 +34,6 @@
* - Extra features * - Extra features
* *
* Advanced settings can be found in Configuration_adv.h * Advanced settings can be found in Configuration_adv.h
*
*/ */
#define CONFIGURATION_H_VERSION 020007 #define CONFIGURATION_H_VERSION 020007
@ -856,7 +855,6 @@
* - For simple switches connect... * - For simple switches connect...
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
*
*/ */
//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
@ -1568,7 +1566,6 @@
* *
* Caveats: The ending Z should be the same as starting Z. * Caveats: The ending Z should be the same as starting Z.
* Attention: EXPERIMENTAL. G-code arguments may change. * Attention: EXPERIMENTAL. G-code arguments may change.
*
*/ */
//#define NOZZLE_CLEAN_FEATURE //#define NOZZLE_CLEAN_FEATURE
@ -1721,7 +1718,6 @@
* *
* SD Card support is disabled by default. If your controller has an SD slot, * SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work. * you must uncomment the following option or it won't work.
*
*/ */
#define SDSUPPORT #define SDSUPPORT
@ -2350,7 +2346,6 @@
* *** CAUTION *** * *** CAUTION ***
* *
* LED Type. Enable only one of the following two options. * LED Type. Enable only one of the following two options.
*
*/ */
//#define RGB_LED //#define RGB_LED
//#define RGBW_LED //#define RGBW_LED

3
config/examples/Creality/CR-10/Configuration_adv.h
View file

@ -29,7 +29,6 @@
* Some of these settings can damage your printer if improperly set! * Some of these settings can damage your printer if improperly set!
* *
* Basic settings can be found in Configuration.h * Basic settings can be found in Configuration.h
*
*/ */
#define CONFIGURATION_ADV_H_VERSION 020007 #define CONFIGURATION_ADV_H_VERSION 020007
@ -738,7 +737,6 @@
* | 4 3 | 1 4 | 2 1 | 3 2 | * | 4 3 | 1 4 | 2 1 | 3 2 |
* | | | | | * | | | | |
* | 1 2 | 2 3 | 3 4 | 4 1 | * | 1 2 | 2 3 | 3 4 | 4 1 |
*
*/ */
#ifndef Z_STEPPER_ALIGN_XY #ifndef Z_STEPPER_ALIGN_XY
//#define Z_STEPPERS_ORIENTATION 0 //#define Z_STEPPERS_ORIENTATION 0
@ -1961,7 +1959,6 @@
* Be sure to turn off auto-retract during filament change. * Be sure to turn off auto-retract during filament change.
* *
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
*
*/ */
//#define FWRETRACT //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)

5
config/examples/Creality/CR-10S/Configuration.h
View file

@ -34,7 +34,6 @@
* - Extra features * - Extra features
* *
* Advanced settings can be found in Configuration_adv.h * Advanced settings can be found in Configuration_adv.h
*
*/ */
#define CONFIGURATION_H_VERSION 020007 #define CONFIGURATION_H_VERSION 020007
@ -856,7 +855,6 @@
* - For simple switches connect... * - For simple switches connect...
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
*
*/ */
//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
@ -1569,7 +1567,6 @@
* *
* Caveats: The ending Z should be the same as starting Z. * Caveats: The ending Z should be the same as starting Z.
* Attention: EXPERIMENTAL. G-code arguments may change. * Attention: EXPERIMENTAL. G-code arguments may change.
*
*/ */
//#define NOZZLE_CLEAN_FEATURE //#define NOZZLE_CLEAN_FEATURE
@ -1722,7 +1719,6 @@
* *
* SD Card support is disabled by default. If your controller has an SD slot, * SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work. * you must uncomment the following option or it won't work.
*
*/ */
#define SDSUPPORT #define SDSUPPORT
@ -2351,7 +2347,6 @@
* *** CAUTION *** * *** CAUTION ***
* *
* LED Type. Enable only one of the following two options. * LED Type. Enable only one of the following two options.
*
*/ */
//#define RGB_LED //#define RGB_LED
//#define RGBW_LED //#define RGBW_LED

3
config/examples/Creality/CR-10S/Configuration_adv.h
View file

@ -29,7 +29,6 @@
* Some of these settings can damage your printer if improperly set! * Some of these settings can damage your printer if improperly set!
* *
* Basic settings can be found in Configuration.h * Basic settings can be found in Configuration.h
*
*/ */
#define CONFIGURATION_ADV_H_VERSION 020007 #define CONFIGURATION_ADV_H_VERSION 020007
@ -738,7 +737,6 @@
* | 4 3 | 1 4 | 2 1 | 3 2 | * | 4 3 | 1 4 | 2 1 | 3 2 |
* | | | | | * | | | | |
* | 1 2 | 2 3 | 3 4 | 4 1 | * | 1 2 | 2 3 | 3 4 | 4 1 |
*
*/ */
#ifndef Z_STEPPER_ALIGN_XY #ifndef Z_STEPPER_ALIGN_XY
//#define Z_STEPPERS_ORIENTATION 0 //#define Z_STEPPERS_ORIENTATION 0
@ -1961,7 +1959,6 @@
* Be sure to turn off auto-retract during filament change. * Be sure to turn off auto-retract during filament change.
* *
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
*
*/ */
//#define FWRETRACT //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)

5
config/examples/Creality/CR-10_5S/Configuration.h
View file

@ -34,7 +34,6 @@
* - Extra features * - Extra features
* *
* Advanced settings can be found in Configuration_adv.h * Advanced settings can be found in Configuration_adv.h
*
*/ */
#define CONFIGURATION_H_VERSION 020007 #define CONFIGURATION_H_VERSION 020007
@ -857,7 +856,6 @@
* - For simple switches connect... * - For simple switches connect...
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
*
*/ */
//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
@ -1571,7 +1569,6 @@
* *
* Caveats: The ending Z should be the same as starting Z. * Caveats: The ending Z should be the same as starting Z.
* Attention: EXPERIMENTAL. G-code arguments may change. * Attention: EXPERIMENTAL. G-code arguments may change.
*
*/ */
//#define NOZZLE_CLEAN_FEATURE //#define NOZZLE_CLEAN_FEATURE
@ -1724,7 +1721,6 @@
* *
* SD Card support is disabled by default. If your controller has an SD slot, * SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work. * you must uncomment the following option or it won't work.
*
*/ */
#define SDSUPPORT #define SDSUPPORT
@ -2353,7 +2349,6 @@
* *** CAUTION *** * *** CAUTION ***
* *
* LED Type. Enable only one of the following two options. * LED Type. Enable only one of the following two options.
*
*/ */
//#define RGB_LED //#define RGB_LED
//#define RGBW_LED //#define RGBW_LED

3
config/examples/Creality/CR-10_5S/Configuration_adv.h
View file

@ -29,7 +29,6 @@
* Some of these settings can damage your printer if improperly set! * Some of these settings can damage your printer if improperly set!
* *
* Basic settings can be found in Configuration.h * Basic settings can be found in Configuration.h
*
*/ */
#define CONFIGURATION_ADV_H_VERSION 020007 #define CONFIGURATION_ADV_H_VERSION 020007
@ -738,7 +737,6 @@
* | 4 3 | 1 4 | 2 1 | 3 2 | * | 4 3 | 1 4 | 2 1 | 3 2 |
* | | | | | * | | | | |
* | 1 2 | 2 3 | 3 4 | 4 1 | * | 1 2 | 2 3 | 3 4 | 4 1 |
*
*/ */
#ifndef Z_STEPPER_ALIGN_XY #ifndef Z_STEPPER_ALIGN_XY
//#define Z_STEPPERS_ORIENTATION 0 //#define Z_STEPPERS_ORIENTATION 0
@ -1961,7 +1959,6 @@
* Be sure to turn off auto-retract during filament change. * Be sure to turn off auto-retract during filament change.
* *
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
*
*/ */
//#define FWRETRACT //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)

5
config/examples/Creality/CR-10mini/CrealityV1/Configuration.h
View file

@ -34,7 +34,6 @@
* - Extra features * - Extra features
* *
* Advanced settings can be found in Configuration_adv.h * Advanced settings can be found in Configuration_adv.h
*
*/ */
/** /**
@ -865,7 +864,6 @@
* - For simple switches connect... * - For simple switches connect...
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
*
*/ */
//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
@ -1577,7 +1575,6 @@
* *
* Caveats: The ending Z should be the same as starting Z. * Caveats: The ending Z should be the same as starting Z.
* Attention: EXPERIMENTAL. G-code arguments may change. * Attention: EXPERIMENTAL. G-code arguments may change.
*
*/ */
//#define NOZZLE_CLEAN_FEATURE //#define NOZZLE_CLEAN_FEATURE
@ -1730,7 +1727,6 @@
* *
* SD Card support is disabled by default. If your controller has an SD slot, * SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work. * you must uncomment the following option or it won't work.
*
*/ */
#define SDSUPPORT #define SDSUPPORT
@ -2359,7 +2355,6 @@
* *** CAUTION *** * *** CAUTION ***
* *
* LED Type. Enable only one of the following two options. * LED Type. Enable only one of the following two options.
*
*/ */
//#define RGB_LED //#define RGB_LED
//#define RGBW_LED //#define RGBW_LED

3
config/examples/Creality/CR-10mini/CrealityV1/Configuration_adv.h
View file

@ -29,7 +29,6 @@
* Some of these settings can damage your printer if improperly set! * Some of these settings can damage your printer if improperly set!
* *
* Basic settings can be found in Configuration.h * Basic settings can be found in Configuration.h
*
*/ */
#define CONFIGURATION_ADV_H_VERSION 020007 #define CONFIGURATION_ADV_H_VERSION 020007
@ -738,7 +737,6 @@
* | 4 3 | 1 4 | 2 1 | 3 2 | * | 4 3 | 1 4 | 2 1 | 3 2 |
* | | | | | * | | | | |
* | 1 2 | 2 3 | 3 4 | 4 1 | * | 1 2 | 2 3 | 3 4 | 4 1 |
*
*/ */
#ifndef Z_STEPPER_ALIGN_XY #ifndef Z_STEPPER_ALIGN_XY
//#define Z_STEPPERS_ORIENTATION 0 //#define Z_STEPPERS_ORIENTATION 0
@ -1961,7 +1959,6 @@
* Be sure to turn off auto-retract during filament change. * Be sure to turn off auto-retract during filament change.
* *
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
*
*/ */
//#define FWRETRACT //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)

5
config/examples/Creality/CR-10mini/MEEB-3DP/Configuration.h
View file

@ -34,7 +34,6 @@
* - Extra features * - Extra features
* *
* Advanced settings can be found in Configuration_adv.h * Advanced settings can be found in Configuration_adv.h
*
*/ */
#define CONFIGURATION_H_VERSION 020007 #define CONFIGURATION_H_VERSION 020007
@ -856,7 +855,6 @@
* - For simple switches connect... * - For simple switches connect...
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
*
*/ */
//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
@ -1568,7 +1566,6 @@
* *
* Caveats: The ending Z should be the same as starting Z. * Caveats: The ending Z should be the same as starting Z.
* Attention: EXPERIMENTAL. G-code arguments may change. * Attention: EXPERIMENTAL. G-code arguments may change.
*
*/ */
//#define NOZZLE_CLEAN_FEATURE //#define NOZZLE_CLEAN_FEATURE
@ -1721,7 +1718,6 @@
* *
* SD Card support is disabled by default. If your controller has an SD slot, * SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work. * you must uncomment the following option or it won't work.
*
*/ */
//#define SDSUPPORT //#define SDSUPPORT
@ -2350,7 +2346,6 @@
* *** CAUTION *** * *** CAUTION ***
* *
* LED Type. Enable only one of the following two options. * LED Type. Enable only one of the following two options.
*
*/ */
//#define RGB_LED //#define RGB_LED
//#define RGBW_LED //#define RGBW_LED

3
config/examples/Creality/CR-10mini/MEEB-3DP/Configuration_adv.h
View file

@ -29,7 +29,6 @@
* Some of these settings can damage your printer if improperly set! * Some of these settings can damage your printer if improperly set!
* *
* Basic settings can be found in Configuration.h * Basic settings can be found in Configuration.h
*
*/ */
#define CONFIGURATION_ADV_H_VERSION 020007 #define CONFIGURATION_ADV_H_VERSION 020007
@ -738,7 +737,6 @@
* | 4 3 | 1 4 | 2 1 | 3 2 | * | 4 3 | 1 4 | 2 1 | 3 2 |
* | | | | | * | | | | |
* | 1 2 | 2 3 | 3 4 | 4 1 | * | 1 2 | 2 3 | 3 4 | 4 1 |
*
*/ */
#ifndef Z_STEPPER_ALIGN_XY #ifndef Z_STEPPER_ALIGN_XY
//#define Z_STEPPERS_ORIENTATION 0 //#define Z_STEPPERS_ORIENTATION 0
@ -1961,7 +1959,6 @@
* Be sure to turn off auto-retract during filament change. * Be sure to turn off auto-retract during filament change.
* *
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
*
*/ */
//#define FWRETRACT //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)

5
config/examples/Creality/CR-20 Pro/Configuration.h
View file

@ -34,7 +34,6 @@
* - Extra features * - Extra features
* *
* Advanced settings can be found in Configuration_adv.h * Advanced settings can be found in Configuration_adv.h
*
*/ */
#define CONFIGURATION_H_VERSION 020007 #define CONFIGURATION_H_VERSION 020007
@ -857,7 +856,6 @@
* - For simple switches connect... * - For simple switches connect...
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
*
*/ */
//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
@ -1570,7 +1568,6 @@
* *
* Caveats: The ending Z should be the same as starting Z. * Caveats: The ending Z should be the same as starting Z.
* Attention: EXPERIMENTAL. G-code arguments may change. * Attention: EXPERIMENTAL. G-code arguments may change.
*
*/ */
//#define NOZZLE_CLEAN_FEATURE //#define NOZZLE_CLEAN_FEATURE
@ -1723,7 +1720,6 @@
* *
* SD Card support is disabled by default. If your controller has an SD slot, * SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work. * you must uncomment the following option or it won't work.
*
*/ */
#define SDSUPPORT #define SDSUPPORT
@ -2355,7 +2351,6 @@
* *** CAUTION *** * *** CAUTION ***
* *
* LED Type. Enable only one of the following two options. * LED Type. Enable only one of the following two options.
*
*/ */
//#define RGB_LED //#define RGB_LED
//#define RGBW_LED //#define RGBW_LED

3
config/examples/Creality/CR-20 Pro/Configuration_adv.h
View file

@ -29,7 +29,6 @@
* Some of these settings can damage your printer if improperly set! * Some of these settings can damage your printer if improperly set!
* *
* Basic settings can be found in Configuration.h * Basic settings can be found in Configuration.h
*
*/ */
#define CONFIGURATION_ADV_H_VERSION 020007 #define CONFIGURATION_ADV_H_VERSION 020007
@ -738,7 +737,6 @@
* | 4 3 | 1 4 | 2 1 | 3 2 | * | 4 3 | 1 4 | 2 1 | 3 2 |
* | | | | | * | | | | |
* | 1 2 | 2 3 | 3 4 | 4 1 | * | 1 2 | 2 3 | 3 4 | 4 1 |
*
*/ */
#ifndef Z_STEPPER_ALIGN_XY #ifndef Z_STEPPER_ALIGN_XY
//#define Z_STEPPERS_ORIENTATION 0 //#define Z_STEPPERS_ORIENTATION 0
@ -1961,7 +1959,6 @@
* Be sure to turn off auto-retract during filament change. * Be sure to turn off auto-retract during filament change.
* *
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
*
*/ */
//#define FWRETRACT //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)

5
config/examples/Creality/CR-20/Configuration.h
View file

@ -34,7 +34,6 @@
* - Extra features * - Extra features
* *
* Advanced settings can be found in Configuration_adv.h * Advanced settings can be found in Configuration_adv.h
*
*/ */
#define CONFIGURATION_H_VERSION 020007 #define CONFIGURATION_H_VERSION 020007
@ -857,7 +856,6 @@
* - For simple switches connect... * - For simple switches connect...
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
*
*/ */
//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
@ -1570,7 +1568,6 @@
* *
* Caveats: The ending Z should be the same as starting Z. * Caveats: The ending Z should be the same as starting Z.
* Attention: EXPERIMENTAL. G-code arguments may change. * Attention: EXPERIMENTAL. G-code arguments may change.
*
*/ */
//#define NOZZLE_CLEAN_FEATURE //#define NOZZLE_CLEAN_FEATURE
@ -1723,7 +1720,6 @@
* *
* SD Card support is disabled by default. If your controller has an SD slot, * SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work. * you must uncomment the following option or it won't work.
*
*/ */
#define SDSUPPORT #define SDSUPPORT
@ -2355,7 +2351,6 @@
* *** CAUTION *** * *** CAUTION ***
* *
* LED Type. Enable only one of the following two options. * LED Type. Enable only one of the following two options.
*
*/ */
//#define RGB_LED //#define RGB_LED
//#define RGBW_LED //#define RGBW_LED

3
config/examples/Creality/CR-20/Configuration_adv.h
View file

@ -29,7 +29,6 @@
* Some of these settings can damage your printer if improperly set! * Some of these settings can damage your printer if improperly set!
* *
* Basic settings can be found in Configuration.h * Basic settings can be found in Configuration.h
*
*/ */
#define CONFIGURATION_ADV_H_VERSION 020007 #define CONFIGURATION_ADV_H_VERSION 020007
@ -738,7 +737,6 @@
* | 4 3 | 1 4 | 2 1 | 3 2 | * | 4 3 | 1 4 | 2 1 | 3 2 |
* | | | | | * | | | | |
* | 1 2 | 2 3 | 3 4 | 4 1 | * | 1 2 | 2 3 | 3 4 | 4 1 |
*
*/ */
#ifndef Z_STEPPER_ALIGN_XY #ifndef Z_STEPPER_ALIGN_XY
//#define Z_STEPPERS_ORIENTATION 0 //#define Z_STEPPERS_ORIENTATION 0
@ -1961,7 +1959,6 @@
* Be sure to turn off auto-retract during filament change. * Be sure to turn off auto-retract during filament change.
* *
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
*
*/ */
//#define FWRETRACT //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)

5
config/examples/Creality/CR-8/Configuration.h
View file

@ -34,7 +34,6 @@
* - Extra features * - Extra features
* *
* Advanced settings can be found in Configuration_adv.h * Advanced settings can be found in Configuration_adv.h
*
*/ */
#define CONFIGURATION_H_VERSION 020007 #define CONFIGURATION_H_VERSION 020007
@ -856,7 +855,6 @@
* - For simple switches connect... * - For simple switches connect...
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
*
*/ */
//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
@ -1568,7 +1566,6 @@
* *
* Caveats: The ending Z should be the same as starting Z. * Caveats: The ending Z should be the same as starting Z.
* Attention: EXPERIMENTAL. G-code arguments may change. * Attention: EXPERIMENTAL. G-code arguments may change.
*
*/ */
#define NOZZLE_CLEAN_FEATURE #define NOZZLE_CLEAN_FEATURE
@ -1721,7 +1718,6 @@
* *
* SD Card support is disabled by default. If your controller has an SD slot, * SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work. * you must uncomment the following option or it won't work.
*
*/ */
#define SDSUPPORT #define SDSUPPORT
@ -2350,7 +2346,6 @@
* *** CAUTION *** * *** CAUTION ***
* *
* LED Type. Enable only one of the following two options. * LED Type. Enable only one of the following two options.
*
*/ */
//#define RGB_LED //#define RGB_LED
//#define RGBW_LED //#define RGBW_LED

3
config/examples/Creality/CR-8/Configuration_adv.h
View file

@ -29,7 +29,6 @@
* Some of these settings can damage your printer if improperly set! * Some of these settings can damage your printer if improperly set!
* *
* Basic settings can be found in Configuration.h * Basic settings can be found in Configuration.h
*
*/ */
#define CONFIGURATION_ADV_H_VERSION 020007 #define CONFIGURATION_ADV_H_VERSION 020007
@ -738,7 +737,6 @@
* | 4 3 | 1 4 | 2 1 | 3 2 | * | 4 3 | 1 4 | 2 1 | 3 2 |
* | | | | | * | | | | |
* | 1 2 | 2 3 | 3 4 | 4 1 | * | 1 2 | 2 3 | 3 4 | 4 1 |
*
*/ */
#ifndef Z_STEPPER_ALIGN_XY #ifndef Z_STEPPER_ALIGN_XY
//#define Z_STEPPERS_ORIENTATION 0 //#define Z_STEPPERS_ORIENTATION 0
@ -1961,7 +1959,6 @@
* Be sure to turn off auto-retract during filament change. * Be sure to turn off auto-retract during filament change.
* *
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
*
*/ */
//#define FWRETRACT //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)

5
config/examples/Creality/Ender-2/Configuration.h
View file

@ -34,7 +34,6 @@
* - Extra features * - Extra features
* *
* Advanced settings can be found in Configuration_adv.h * Advanced settings can be found in Configuration_adv.h
*
*/ */
#define CONFIGURATION_H_VERSION 020007 #define CONFIGURATION_H_VERSION 020007
@ -857,7 +856,6 @@
* - For simple switches connect... * - For simple switches connect...
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
*
*/ */
//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
@ -1569,7 +1567,6 @@
* *
* Caveats: The ending Z should be the same as starting Z. * Caveats: The ending Z should be the same as starting Z.
* Attention: EXPERIMENTAL. G-code arguments may change. * Attention: EXPERIMENTAL. G-code arguments may change.
*
*/ */
//#define NOZZLE_CLEAN_FEATURE //#define NOZZLE_CLEAN_FEATURE
@ -1722,7 +1719,6 @@
* *
* SD Card support is disabled by default. If your controller has an SD slot, * SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work. * you must uncomment the following option or it won't work.
*
*/ */
#define SDSUPPORT #define SDSUPPORT
@ -2351,7 +2347,6 @@
* *** CAUTION *** * *** CAUTION ***
* *
* LED Type. Enable only one of the following two options. * LED Type. Enable only one of the following two options.
*
*/ */
//#define RGB_LED //#define RGB_LED
//#define RGBW_LED //#define RGBW_LED

3
config/examples/Creality/Ender-2/Configuration_adv.h
View file

@ -29,7 +29,6 @@
* Some of these settings can damage your printer if improperly set! * Some of these settings can damage your printer if improperly set!
* *
* Basic settings can be found in Configuration.h * Basic settings can be found in Configuration.h
*
*/ */
#define CONFIGURATION_ADV_H_VERSION 020007 #define CONFIGURATION_ADV_H_VERSION 020007
@ -738,7 +737,6 @@
* | 4 3 | 1 4 | 2 1 | 3 2 | * | 4 3 | 1 4 | 2 1 | 3 2 |
* | | | | | * | | | | |
* | 1 2 | 2 3 | 3 4 | 4 1 | * | 1 2 | 2 3 | 3 4 | 4 1 |
*
*/ */
#ifndef Z_STEPPER_ALIGN_XY #ifndef Z_STEPPER_ALIGN_XY
//#define Z_STEPPERS_ORIENTATION 0 //#define Z_STEPPERS_ORIENTATION 0
@ -1961,7 +1959,6 @@
* Be sure to turn off auto-retract during filament change. * Be sure to turn off auto-retract during filament change.
* *
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
*
*/ */
//#define FWRETRACT //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)

5
config/examples/Creality/Ender-3 Pro V1.5/Configuration.h
View file

@ -34,7 +34,6 @@
* - Extra features * - Extra features
* *
* Advanced settings can be found in Configuration_adv.h * Advanced settings can be found in Configuration_adv.h
*
*/ */
#define CONFIGURATION_H_VERSION 020007 #define CONFIGURATION_H_VERSION 020007
@ -857,7 +856,6 @@
* - For simple switches connect... * - For simple switches connect...
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
*
*/ */
//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
@ -1569,7 +1567,6 @@
* *
* Caveats: The ending Z should be the same as starting Z. * Caveats: The ending Z should be the same as starting Z.
* Attention: EXPERIMENTAL. G-code arguments may change. * Attention: EXPERIMENTAL. G-code arguments may change.
*
*/ */
//#define NOZZLE_CLEAN_FEATURE //#define NOZZLE_CLEAN_FEATURE
@ -1722,7 +1719,6 @@
* *
* SD Card support is disabled by default. If your controller has an SD slot, * SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work. * you must uncomment the following option or it won't work.
*
*/ */
#define SDSUPPORT #define SDSUPPORT
@ -2356,7 +2352,6 @@
* *** CAUTION *** * *** CAUTION ***
* *
* LED Type. Enable only one of the following two options. * LED Type. Enable only one of the following two options.
*
*/ */
//#define RGB_LED //#define RGB_LED
//#define RGBW_LED //#define RGBW_LED

3
config/examples/Creality/Ender-3 Pro V1.5/Configuration_adv.h
View file

@ -29,7 +29,6 @@
* Some of these settings can damage your printer if improperly set! * Some of these settings can damage your printer if improperly set!
* *
* Basic settings can be found in Configuration.h * Basic settings can be found in Configuration.h
*
*/ */
#define CONFIGURATION_ADV_H_VERSION 020007 #define CONFIGURATION_ADV_H_VERSION 020007
@ -738,7 +737,6 @@
* | 4 3 | 1 4 | 2 1 | 3 2 | * | 4 3 | 1 4 | 2 1 | 3 2 |
* | | | | | * | | | | |
* | 1 2 | 2 3 | 3 4 | 4 1 | * | 1 2 | 2 3 | 3 4 | 4 1 |
*
*/ */
#ifndef Z_STEPPER_ALIGN_XY #ifndef Z_STEPPER_ALIGN_XY
//#define Z_STEPPERS_ORIENTATION 0 //#define Z_STEPPERS_ORIENTATION 0
@ -1962,7 +1960,6 @@
* Be sure to turn off auto-retract during filament change. * Be sure to turn off auto-retract during filament change.
* *
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
*
*/ */
//#define FWRETRACT //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)

5
config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h
View file

@ -34,7 +34,6 @@
* - Extra features * - Extra features
* *
* Advanced settings can be found in Configuration_adv.h * Advanced settings can be found in Configuration_adv.h
*
*/ */
#define CONFIGURATION_H_VERSION 020007 #define CONFIGURATION_H_VERSION 020007
@ -856,7 +855,6 @@
* - For simple switches connect... * - For simple switches connect...
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
*
*/ */
//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
@ -1568,7 +1566,6 @@
* *
* Caveats: The ending Z should be the same as starting Z. * Caveats: The ending Z should be the same as starting Z.
* Attention: EXPERIMENTAL. G-code arguments may change. * Attention: EXPERIMENTAL. G-code arguments may change.
*
*/ */
//#define NOZZLE_CLEAN_FEATURE //#define NOZZLE_CLEAN_FEATURE
@ -1721,7 +1718,6 @@
* *
* SD Card support is disabled by default. If your controller has an SD slot, * SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work. * you must uncomment the following option or it won't work.
*
*/ */
#define SDSUPPORT #define SDSUPPORT
@ -2350,7 +2346,6 @@
* *** CAUTION *** * *** CAUTION ***
* *
* LED Type. Enable only one of the following two options. * LED Type. Enable only one of the following two options.
*
*/ */
//#define RGB_LED //#define RGB_LED
//#define RGBW_LED //#define RGBW_LED

3
config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h
View file

@ -29,7 +29,6 @@
* Some of these settings can damage your printer if improperly set! * Some of these settings can damage your printer if improperly set!
* *
* Basic settings can be found in Configuration.h * Basic settings can be found in Configuration.h
*
*/ */
#define CONFIGURATION_ADV_H_VERSION 020007 #define CONFIGURATION_ADV_H_VERSION 020007
@ -738,7 +737,6 @@
* | 4 3 | 1 4 | 2 1 | 3 2 | * | 4 3 | 1 4 | 2 1 | 3 2 |
* | | | | | * | | | | |
* | 1 2 | 2 3 | 3 4 | 4 1 | * | 1 2 | 2 3 | 3 4 | 4 1 |
*
*/ */
#ifndef Z_STEPPER_ALIGN_XY #ifndef Z_STEPPER_ALIGN_XY
//#define Z_STEPPERS_ORIENTATION 0 //#define Z_STEPPERS_ORIENTATION 0
@ -1961,7 +1959,6 @@
* Be sure to turn off auto-retract during filament change. * Be sure to turn off auto-retract during filament change.
* *
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
*
*/ */
//#define FWRETRACT //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)

5
config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h
View file

@ -34,7 +34,6 @@
* - Extra features * - Extra features
* *
* Advanced settings can be found in Configuration_adv.h * Advanced settings can be found in Configuration_adv.h
*
*/ */
#define CONFIGURATION_H_VERSION 020007 #define CONFIGURATION_H_VERSION 020007
@ -856,7 +855,6 @@
* - For simple switches connect... * - For simple switches connect...
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
*
*/ */
//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
@ -1568,7 +1566,6 @@
* *
* Caveats: The ending Z should be the same as starting Z. * Caveats: The ending Z should be the same as starting Z.
* Attention: EXPERIMENTAL. G-code arguments may change. * Attention: EXPERIMENTAL. G-code arguments may change.
*
*/ */
//#define NOZZLE_CLEAN_FEATURE //#define NOZZLE_CLEAN_FEATURE
@ -1721,7 +1718,6 @@
* *
* SD Card support is disabled by default. If your controller has an SD slot, * SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work. * you must uncomment the following option or it won't work.
*
*/ */
#define SDSUPPORT #define SDSUPPORT
@ -2350,7 +2346,6 @@
* *** CAUTION *** * *** CAUTION ***
* *
* LED Type. Enable only one of the following two options. * LED Type. Enable only one of the following two options.
*
*/ */
//#define RGB_LED //#define RGB_LED
//#define RGBW_LED //#define RGBW_LED

3
config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h
View file

@ -29,7 +29,6 @@
* Some of these settings can damage your printer if improperly set! * Some of these settings can damage your printer if improperly set!
* *
* Basic settings can be found in Configuration.h * Basic settings can be found in Configuration.h
*
*/ */
#define CONFIGURATION_ADV_H_VERSION 020007 #define CONFIGURATION_ADV_H_VERSION 020007
@ -738,7 +737,6 @@
* | 4 3 | 1 4 | 2 1 | 3 2 | * | 4 3 | 1 4 | 2 1 | 3 2 |
* | | | | | * | | | | |
* | 1 2 | 2 3 | 3 4 | 4 1 | * | 1 2 | 2 3 | 3 4 | 4 1 |
*
*/ */
#ifndef Z_STEPPER_ALIGN_XY #ifndef Z_STEPPER_ALIGN_XY
//#define Z_STEPPERS_ORIENTATION 0 //#define Z_STEPPERS_ORIENTATION 0
@ -1961,7 +1959,6 @@
* Be sure to turn off auto-retract during filament change. * Be sure to turn off auto-retract during filament change.
* *
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
*
*/ */
//#define FWRETRACT //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)

5
config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h
View file

@ -34,7 +34,6 @@
* - Extra features * - Extra features
* *
* Advanced settings can be found in Configuration_adv.h * Advanced settings can be found in Configuration_adv.h
*
*/ */
#define CONFIGURATION_H_VERSION 020007 #define CONFIGURATION_H_VERSION 020007
@ -856,7 +855,6 @@
* - For simple switches connect... * - For simple switches connect...
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
*
*/ */
//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
@ -1568,7 +1566,6 @@
* *
* Caveats: The ending Z should be the same as starting Z. * Caveats: The ending Z should be the same as starting Z.
* Attention: EXPERIMENTAL. G-code arguments may change. * Attention: EXPERIMENTAL. G-code arguments may change.
*
*/ */
//#define NOZZLE_CLEAN_FEATURE //#define NOZZLE_CLEAN_FEATURE
@ -1721,7 +1718,6 @@
* *
* SD Card support is disabled by default. If your controller has an SD slot, * SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work. * you must uncomment the following option or it won't work.
*
*/ */
#define SDSUPPORT #define SDSUPPORT
@ -2350,7 +2346,6 @@
* *** CAUTION *** * *** CAUTION ***
* *
* LED Type. Enable only one of the following two options. * LED Type. Enable only one of the following two options.
*
*/ */
//#define RGB_LED //#define RGB_LED
//#define RGBW_LED //#define RGBW_LED

3
config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h
View file

@ -29,7 +29,6 @@
* Some of these settings can damage your printer if improperly set! * Some of these settings can damage your printer if improperly set!
* *
* Basic settings can be found in Configuration.h * Basic settings can be found in Configuration.h
*
*/ */
#define CONFIGURATION_ADV_H_VERSION 020007 #define CONFIGURATION_ADV_H_VERSION 020007
@ -738,7 +737,6 @@
* | 4 3 | 1 4 | 2 1 | 3 2 | * | 4 3 | 1 4 | 2 1 | 3 2 |
* | | | | | * | | | | |
* | 1 2 | 2 3 | 3 4 | 4 1 | * | 1 2 | 2 3 | 3 4 | 4 1 |
*
*/ */
#ifndef Z_STEPPER_ALIGN_XY #ifndef Z_STEPPER_ALIGN_XY
//#define Z_STEPPERS_ORIENTATION 0 //#define Z_STEPPERS_ORIENTATION 0
@ -1961,7 +1959,6 @@
* Be sure to turn off auto-retract during filament change. * Be sure to turn off auto-retract during filament change.
* *
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
*
*/ */
//#define FWRETRACT //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)

5
config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h
View file

@ -34,7 +34,6 @@
* - Extra features * - Extra features
* *
* Advanced settings can be found in Configuration_adv.h * Advanced settings can be found in Configuration_adv.h
*
*/ */
#define CONFIGURATION_H_VERSION 020007 #define CONFIGURATION_H_VERSION 020007
@ -857,7 +856,6 @@
* - For simple switches connect... * - For simple switches connect...
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
*
*/ */
//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
@ -1569,7 +1567,6 @@
* *
* Caveats: The ending Z should be the same as starting Z. * Caveats: The ending Z should be the same as starting Z.
* Attention: EXPERIMENTAL. G-code arguments may change. * Attention: EXPERIMENTAL. G-code arguments may change.
*
*/ */
//#define NOZZLE_CLEAN_FEATURE //#define NOZZLE_CLEAN_FEATURE
@ -1722,7 +1719,6 @@
* *
* SD Card support is disabled by default. If your controller has an SD slot, * SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work. * you must uncomment the following option or it won't work.
*
*/ */
#define SDSUPPORT #define SDSUPPORT
@ -2351,7 +2347,6 @@
* *** CAUTION *** * *** CAUTION ***
* *
* LED Type. Enable only one of the following two options. * LED Type. Enable only one of the following two options.
*
*/ */
//#define RGB_LED //#define RGB_LED
//#define RGBW_LED //#define RGBW_LED

3
config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h
View file

@ -29,7 +29,6 @@
* Some of these settings can damage your printer if improperly set! * Some of these settings can damage your printer if improperly set!
* *
* Basic settings can be found in Configuration.h * Basic settings can be found in Configuration.h
*
*/ */
#define CONFIGURATION_ADV_H_VERSION 020007 #define CONFIGURATION_ADV_H_VERSION 020007
@ -738,7 +737,6 @@
* | 4 3 | 1 4 | 2 1 | 3 2 | * | 4 3 | 1 4 | 2 1 | 3 2 |
* | | | | | * | | | | |
* | 1 2 | 2 3 | 3 4 | 4 1 | * | 1 2 | 2 3 | 3 4 | 4 1 |
*
*/ */
#ifndef Z_STEPPER_ALIGN_XY #ifndef Z_STEPPER_ALIGN_XY
//#define Z_STEPPERS_ORIENTATION 0 //#define Z_STEPPERS_ORIENTATION 0
@ -1961,7 +1959,6 @@
* Be sure to turn off auto-retract during filament change. * Be sure to turn off auto-retract during filament change.
* *
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
*
*/ */
//#define FWRETRACT //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)

Some files were not shown because too many files have changed in this diff Show more