3D-printing/Configurations
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Configurations.git synced 2025-07-25 07:34:06 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions

Clean up a README

Browse source
This commit is contained in:
Scott Lahteine 2021-04-14 01:53:48 -05:00
parent f9ba4728de
commit 44f4a70789
1 changed files with 7 additions and 7 deletions
Download patch file Download diff file Expand all files Collapse all files

14
config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/README.md
View file

@ -1,15 +1,15 @@
## CR-10 Mini with BLTouch ## CR-10 Mini with BLTouch
Configuration for the BigTreeTech SKR E3 Mini V2 in a Creality CR-10 Mini using the stock CR-10 display, and a BL Touch v3.1 ABL probe mounted on a Bullseye fan duct. Additional features are enabled to take advantage of the capabilities of the BTT SKR E3 Mini V2 board, detailed below. Configuration for the BigTreeTech SKR E3 Mini V2 in a Creality CR-10 Mini using the stock CR-10 display, and a BL Touch v3.1 ABL probe mounted on a Bullseye fan duct. Additional features are enabled to take advantage of the capabilities of the BTT SKR E3 Mini V2 board, detailed below.
Compile this in the `STM32F103RC_btt_512K` environment. The test board had 512K of Flash and this configuration uses a little over half of that. If your board has only 256K, you will have to disable some features to make the firmware fit. Compile this in the `STM32F103RC_btt_512K` environment. The test board had 512K of Flash and this configuration uses a little over half of that. If your board has only 256K, you will have to disable some features to make the firmware fit.
### Configuration.h notes: ### Configuration.h notes:
```cpp ```cpp
#define USE_PROBE_FOR_Z_HOMING #define USE_PROBE_FOR_Z_HOMING
``` ```
This configuration uses only the probe for Z homing. The Z-stop switch is NOT enabled and can be disconnected. This configuration uses only the probe for Z homing. The Z-stop switch is NOT enabled and can be disconnected.
```cpp ```cpp
#define Z_MIN_PROBE_PIN PC14 #define Z_MIN_PROBE_PIN PC14
@ -50,14 +50,14 @@ This configuration is set to use a 5x5 (25 point) probing grid. Change as desire
#define EXTRAPOLATE_BEYOND_GRID #define EXTRAPOLATE_BEYOND_GRID
``` ```
By default, this is disabled. Enabling this seemed to provide better mesh data. By default, this is disabled. Enabling this seemed to provide better mesh data.
```cpp ```cpp
#define LCD_BED_LEVELING #define LCD_BED_LEVELING
``` ```
Provides control panel probe controls. Provides control panel probe controls.
```cpp ```cpp
#define LEVEL_BED_CORNERS #define LEVEL_BED_CORNERS
``` ```
Provides control panel bed tramming controls. Provides control panel bed tramming controls.
@ -86,4 +86,4 @@ Enables G2/G3 moves to smooth curves in your prints. Required for the Arc Welder
```cpp ```cpp
#define ARC_P_CIRCLES #define ARC_P_CIRCLES
``` ```
Normally disabled by default. Normally disabled by default.