3D-printing/Configurations
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Configurations.git synced 2025-07-23 14:44:21 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions

Clean up a README

Browse source
This commit is contained in:
Scott Lahteine 2021-04-14 01:53:48 -05:00
parent f9ba4728de
commit 44f4a70789
1 changed files with 7 additions and 7 deletions
Download patch file Download diff file Expand all files Collapse all files

14
config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/README.md
View file

@ -1,15 +1,15 @@
## CR-10 Mini with BLTouch
Configuration for the BigTreeTech SKR E3 Mini V2 in a Creality CR-10 Mini using the stock CR-10 display, and a BL Touch v3.1 ABL probe mounted on a Bullseye fan duct. Additional features are enabled to take advantage of the capabilities of the BTT SKR E3 Mini V2 board, detailed below.
Compile this in the `STM32F103RC_btt_512K` environment. The test board had 512K of Flash and this configuration uses a little over half of that. If your board has only 256K, you will have to disable some features to make the firmware fit.
### Configuration.h notes:
```cpp
#define USE_PROBE_FOR_Z_HOMING
```
This configuration uses only the probe for Z homing. The Z-stop switch is NOT enabled and can be disconnected.
This configuration uses only the probe for Z homing. The Z-stop switch is NOT enabled and can be disconnected.
```cpp
#define Z_MIN_PROBE_PIN PC14
@ -50,14 +50,14 @@ This configuration is set to use a 5x5 (25 point) probing grid. Change as desire
#define EXTRAPOLATE_BEYOND_GRID
```
By default, this is disabled. Enabling this seemed to provide better mesh data.
```cpp
#define LCD_BED_LEVELING
```
Provides control panel probe controls.
```cpp
#define LEVEL_BED_CORNERS
#define LEVEL_BED_CORNERS
```
Provides control panel bed tramming controls.
@ -86,4 +86,4 @@ Enables G2/G3 moves to smooth curves in your prints. Required for the Arc Welder
```cpp
#define ARC_P_CIRCLES
```
Normally disabled by default.
Normally disabled by default.